From: Stefan Roese Date: Tue, 9 Oct 2018 06:59:12 +0000 (+0200) Subject: mips: mt76xx: gardena-smart-gateway: Add LEDs to dts X-Git-Tag: v2019.01-rc1~31^2~7 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=840293b83ceec3c8399f6aa4a6d4adbeb09b7040;p=oweals%2Fu-boot.git mips: mt76xx: gardena-smart-gateway: Add LEDs to dts Add the available LEDs to the DTS file so that they can be used. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck --- diff --git a/arch/mips/dts/gardena-smart-gateway-mt7688.dts b/arch/mips/dts/gardena-smart-gateway-mt7688.dts index ee99c3d17c..ef8a9612fd 100644 --- a/arch/mips/dts/gardena-smart-gateway-mt7688.dts +++ b/arch/mips/dts/gardena-smart-gateway-mt7688.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "mt7628a.dtsi" +#include / { compatible = "gardena,smart-gateway-mt7688", "ralink,mt7628a-soc"; @@ -21,6 +22,64 @@ reg = <0x0 0x08000000>; }; + leds { + compatible = "gpio-leds"; + + power_blue { + label = "smartgw:power:blue"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_green { + label = "smartgw:power:green"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_red { + label = "smartgw:power:red"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_blue { + label = "smartgw:radio:blue"; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_green { + label = "smartgw:radio:green"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_red { + label = "smartgw:radio:red"; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_blue { + label = "smartgw:internet:blue"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_green { + label = "smartgw:internet:green"; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_red { + label = "smartgw:internet:red"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + chosen { bootargs = "console=ttyS0,57600"; stdout-path = &uart0;