From: nynex Date: Tue, 12 May 2015 17:23:51 +0000 (+0000) Subject: (no comment) X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=80d3e8e5b92db060f21f29ac8d1d7c497388da50;p=librecmc%2Flibrecmc-fossil.git (no comment) --- diff --git a/trunk/target/linux/x86/64/config-default b/trunk/target/linux/x86/64/config-default new file mode 100644 index 00000000..db254409 --- /dev/null +++ b/trunk/target/linux/x86/64/config-default @@ -0,0 +1,216 @@ +CONFIG_64BIT=y +CONFIG_ACPI=y +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +# CONFIG_ACPI_CMPC is not set +# CONFIG_ACPI_CONTAINER is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set +CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_PROCESSOR=y +# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set +# CONFIG_ACPI_PROCFS_POWER is not set +# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_WMI is not set +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" +CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_ATA_SFF is not set +CONFIG_AUDIT_ARCH=y +CONFIG_AVERAGE=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_CALGARY_IOMMU=y +CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y +CONFIG_CPU_RMAP=y +CONFIG_CRC_T10DIF=y +# CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set +# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set +# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set +# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set +# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set +# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set +CONFIG_CRYPTO_CRCT10DIF=y +# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set +# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set +# CONFIG_CRYPTO_SALSA20_X86_64 is not set +# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set +# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set +# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set +# CONFIG_CRYPTO_SHA1_MB is not set +# CONFIG_CRYPTO_SHA1_SSSE3 is not set +# CONFIG_CRYPTO_SHA256_SSSE3 is not set +# CONFIG_CRYPTO_SHA512_SSSE3 is not set +# CONFIG_CRYPTO_SKEIN is not set +# CONFIG_CRYPTO_THREEFISH is not set +# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set +# CONFIG_CRYPTO_TWOFISH_X86_64 is not set +# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set +CONFIG_DIRECT_GBPAGES=y +# CONFIG_EFI is not set +CONFIG_FB=y +CONFIG_FB_CMDLINE=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_VESA is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x16=y +CONFIG_FONT_8x8=y +CONFIG_FONT_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_GART_IOMMU=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CPU=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_HAVE_ACPI_APEI=y +CONFIG_HAVE_ACPI_APEI_NMI=y +# CONFIG_HAVE_AOUT is not set +CONFIG_HAVE_ARCH_SOFT_DIRTY=y +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_FENTRY=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HPET=y +CONFIG_HPET_MMAP=y +# CONFIG_HP_ACCEL is not set +CONFIG_HW_RANDOM_INTEL=y +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HYPERVISOR_GUEST=y +# CONFIG_I7300_IDLE is not set +# CONFIG_IA32_EMULATION is not set +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +# CONFIG_INTEL_IPS is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_INTEL_MIC_BUS is not set +# CONFIG_IOMMU_DEBUG is not set +CONFIG_IOMMU_HELPER=y +# CONFIG_ISCSI_IBFT_FIND is not set +# CONFIG_ITCO_VENDOR_SUPPORT is not set +CONFIG_ITCO_WDT=y +# CONFIG_KVM_DEBUG_FS is not set +CONFIG_KVM_GUEST=y +CONFIG_LPC_ICH=y +# CONFIG_MAXSMP is not set +CONFIG_MEMORY_BALLOON=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_MFD_CORE=y +CONFIG_MODULES_USE_ELF_RELA=y +# CONFIG_MPSC is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NLS=y +CONFIG_NR_CPUS=8 +# CONFIG_NUMA is not set +CONFIG_OUTPUT_FORMAT="elf64-x86-64" +CONFIG_PARAVIRT=y +CONFIG_PARAVIRT_CLOCK=y +# CONFIG_PARAVIRT_DEBUG is not set +# CONFIG_PARAVIRT_SPINLOCKS is not set +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +# CONFIG_PCI_IOAPIC is not set +CONFIG_PCI_LABEL=y +# CONFIG_PCI_MMCONFIG is not set +CONFIG_PHYSICAL_ALIGN=0x1000000 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PNP=y +CONFIG_PNPACPI=y +CONFIG_PNP_DEBUG_MESSAGES=y +# CONFIG_PVPANIC is not set +CONFIG_QUEUE_RWLOCK=y +CONFIG_RAS=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +# CONFIG_SAMSUNG_Q10 is not set +CONFIG_SATA_AHCI=y +CONFIG_SCSI_VIRTIO=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SMP=y +CONFIG_SPARSEMEM=y +CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_MANUAL=y +# CONFIG_SPARSEMEM_VMEMMAP is not set +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_STOP_MACHINE=y +CONFIG_SWIOTLB=y +# CONFIG_THINKPAD_ACPI is not set +# CONFIG_TOPSTAR_LAPTOP is not set +# CONFIG_TOSHIBA_BT_RFKILL is not set +CONFIG_TREE_RCU=y +# CONFIG_UNISYSSPAR is not set +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_STORAGE=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +CONFIG_VIRTIO=y +CONFIG_VIRTIO_BALLOON=y +# CONFIG_VIRTIO_BLK is not set +# CONFIG_VIRTIO_CONSOLE is not set +CONFIG_VIRTIO_MMIO=y +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set +CONFIG_VIRTIO_NET=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRT_DRIVERS=y +CONFIG_VMWARE_BALLOON=y +CONFIG_VMWARE_PVSCSI=y +CONFIG_VMWARE_VMCI=y +CONFIG_VMWARE_VMCI_VSOCKETS=y +CONFIG_VMXNET3=y +CONFIG_VSOCKETS=y +CONFIG_WATCHDOG_CORE=y +CONFIG_X86_64=y +CONFIG_X86_64_SMP=y +# CONFIG_X86_ACPI_CPUFREQ is not set +CONFIG_X86_CMOV=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_X86_DEV_DMA_OPS=y +CONFIG_X86_HT=y +# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +# CONFIG_X86_MSR is not set +# CONFIG_X86_PCC_CPUFREQ is not set +CONFIG_X86_PM_TIMER=y +CONFIG_X86_TSC=y +# CONFIG_XEN is not set +CONFIG_XPS=y +CONFIG_ZONE_DMA32=y diff --git a/trunk/target/linux/x86/64/target.mk b/trunk/target/linux/x86/64/target.mk new file mode 100644 index 00000000..ac636b77 --- /dev/null +++ b/trunk/target/linux/x86/64/target.mk @@ -0,0 +1,9 @@ +ARCH:=x86_64 +BOARDNAME:=x86_64 +DEFAULT_PACKAGES += kmod-e1000 kmod-r8169 +ARCH_PACKAGES:=x86_64 +MAINTAINER:=Imre Kaloz + +define Target/Description + Build images for 64 bit systems including virtualized guests. +endef diff --git a/trunk/target/linux/x86/Makefile b/trunk/target/linux/x86/Makefile new file mode 100644 index 00000000..ba733c02 --- /dev/null +++ b/trunk/target/linux/x86/Makefile @@ -0,0 +1,26 @@ +# +# Copyright (C) 2006-2011 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=i386 +BOARD:=x86 +BOARDNAME:=x86 +FEATURES:=squashfs ext4 vdi vmdk pcmcia targz +SUBTARGETS=generic xen_domu ep80579 geode kvm_guest rdc 64 +MAINTAINER:=Felix Fietkau + +KERNEL_PATCHVER:=3.18 + +KERNELNAME:=bzImage + +include $(INCLUDE_DIR)/target.mk + +$(eval $(call BuildTarget)) + +$(eval $(call $(if $(CONFIG_TARGET_ROOTFS_ISO),RequireCommand,Ignore),mkisofs, \ + Please install mkisofs. \ +)) diff --git a/trunk/target/linux/x86/base-files/etc/config/network b/trunk/target/linux/x86/base-files/etc/config/network new file mode 100644 index 00000000..c9953a02 --- /dev/null +++ b/trunk/target/linux/x86/base-files/etc/config/network @@ -0,0 +1,26 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + option ip6assign 60 + +config interface wan + option ifname eth1 + option proto dhcp + +config interface wan6 + option ifname eth1 + option proto dhcpv6 + +config globals globals + option ula_prefix auto diff --git a/trunk/target/linux/x86/base-files/etc/inittab b/trunk/target/linux/x86/base-files/etc/inittab new file mode 100644 index 00000000..ca90fd8a --- /dev/null +++ b/trunk/target/linux/x86/base-files/etc/inittab @@ -0,0 +1,4 @@ +::sysinit:/etc/init.d/rcS S boot +::shutdown:/etc/init.d/rcS K shutdown +ttyS0::askfirst:/bin/ash --login +tty1::askfirst:/bin/ash --login diff --git a/trunk/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86 b/trunk/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86 new file mode 100644 index 00000000..5d545309 --- /dev/null +++ b/trunk/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86 @@ -0,0 +1,8 @@ +#!/bin/sh +# Copyright (C) 2006-2010 OpenWrt.org +# Copyright (C) 2010 Vertical Communications + +do_mount_procfs() { + mount -o noatime -t proc none /proc +} + diff --git a/trunk/target/linux/x86/base-files/lib/preinit/20_check_iso b/trunk/target/linux/x86/base-files/lib/preinit/20_check_iso new file mode 100644 index 00000000..beff6eba --- /dev/null +++ b/trunk/target/linux/x86/base-files/lib/preinit/20_check_iso @@ -0,0 +1,5 @@ +check_for_iso() { + grep -qE '/dev/root.*iso9660' /proc/mounts && ramoverlay +} + +boot_hook_add preinit_mount_root check_for_iso diff --git a/trunk/target/linux/x86/base-files/lib/preinit/79_move_config b/trunk/target/linux/x86/base-files/lib/preinit/79_move_config new file mode 100644 index 00000000..1d4873d7 --- /dev/null +++ b/trunk/target/linux/x86/base-files/lib/preinit/79_move_config @@ -0,0 +1,15 @@ +#!/bin/sh +# Copyright (C) 2012-2015 OpenWrt.org + +move_config() { + . /lib/upgrade/platform.sh + + if platform_export_bootpart; then + mount -t ext4 -o rw,noatime "$BOOTPART" /mnt + mv -f /mnt/sysupgrade.tgz / + umount /mnt + fi +} + +boot_hook_add preinit_mount_root move_config + diff --git a/trunk/target/linux/x86/base-files/lib/upgrade/platform.sh b/trunk/target/linux/x86/base-files/lib/upgrade/platform.sh new file mode 100644 index 00000000..73ab5ef0 --- /dev/null +++ b/trunk/target/linux/x86/base-files/lib/upgrade/platform.sh @@ -0,0 +1,66 @@ +platform_export_bootpart() { + local cmdline uuid disk + + if read cmdline < /proc/cmdline; then + case "$cmdline" in + *block2mtd=*) + disk="${cmdline##*block2mtd=}" + disk="${disk%%,*}" + ;; + *root=*) + disk="${cmdline##*root=}" + disk="${disk%% *}" + ;; + esac + + case "$disk" in + PARTUUID=[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]-02) + uuid="${disk#PARTUUID=}" + uuid="${uuid%-02}" + for disk in /dev/[hsv]d[a-z]; do + set -- $(dd if=$disk bs=1 skip=440 count=4 2>/dev/null | hexdump -v -e '4/1 "%02x "') + if [ "$4$3$2$1" = "$uuid" ]; then + export BOOTPART="${disk}1" + return 0 + fi + done + ;; + /dev/*) + export BOOTPART="${disk%[0-9]}1" + return 0 + ;; + esac + fi + + return 1 +} + +platform_check_image() { + [ "$#" -gt 1 ] && return 1 + + case "$(get_magic_word "$1")" in + eb48|eb63) return 0;; + *) + echo "Invalid image type" + return 1 + ;; + esac +} + +platform_copy_config() { + if [ -b "$BOOTPART" ]; then + mount -t ext4 -o rw,noatime "$BOOTPART" /mnt + cp -af "$CONF_TAR" /mnt/ + umount /mnt + fi +} + +platform_do_upgrade() { + platform_export_bootpart + + if [ -b "${BOOTPART%[0-9]}" ]; then + sync + get_image "$@" | dd of="${BOOTPART%[0-9]}" bs=4096 conv=fsync + sleep 1 + fi +} diff --git a/trunk/target/linux/x86/config-3.18 b/trunk/target/linux/x86/config-3.18 new file mode 100644 index 00000000..b659fdbc --- /dev/null +++ b/trunk/target/linux/x86/config-3.18 @@ -0,0 +1,434 @@ +# CONFIG_60XX_WDT is not set +# CONFIG_64BIT is not set +# CONFIG_ACPI is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIX is not set +CONFIG_AMD_NB=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +# CONFIG_ARCH_RANDOM is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_QUEUE_RWLOCK=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ATA=y +CONFIG_ATA_GENERIC=y +CONFIG_ATA_PIIX=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_BINFMT_MISC=y +CONFIG_BLK_DEV_SD=y +CONFIG_BOUNCE=y +CONFIG_CLKBLD_I8253=y +CONFIG_CLKEVT_I8253=y +CONFIG_CLKSRC_I8253=y +CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMPAT_VDSO=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_CPU5_WDT is not set +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR=y +CONFIG_CPU_SUP_CYRIX_32=y +CONFIG_CPU_SUP_INTEL=y +CONFIG_CPU_SUP_TRANSMETA_32=y +CONFIG_CPU_SUP_UMC_32=y +CONFIG_CRC16=y +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32_PCLMUL is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set +# CONFIG_CX_ECAT is not set +CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_DCDBAS is not set +# CONFIG_DEBUG_BOOT_PARAMS is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_NMI_SELFTEST is not set +# CONFIG_DEBUG_TLBFLUSH is not set +# CONFIG_DEBUG_VIRTUAL is not set +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_DELL_RBU is not set +# CONFIG_DMI is not set +CONFIG_DNOTIFY=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_DBGP is not set +# CONFIG_EDD is not set +# CONFIG_EUROTECH_WDT is not set +CONFIG_EXT4_FS=y +# CONFIG_F71808E_WDT is not set +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FS_MBCACHE=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GLOB=y +# CONFIG_GOOGLE_FIRMWARE is not set +# CONFIG_HANGCHECK_TIMER is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_AOUT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_KMEMCHECK=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ATOMIC_IOMAP=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KPROBES_ON_FTRACE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PCSPKR_PLATFORM=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_EVENTS_NMI=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y +# CONFIG_HIGHMEM4G is not set +CONFIG_HPET_EMULATE_RTC=y +CONFIG_HPET_TIMER=y +# CONFIG_HP_WATCHDOG is not set +CONFIG_HT_IRQ=y +# CONFIG_HUGETLBFS is not set +CONFIG_HW_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_GEODE=y +CONFIG_HW_RANDOM_VIA=y +# CONFIG_HYPERVISOR_GUEST is not set +CONFIG_HZ_PERIODIC=y +CONFIG_I8253_LOCK=y +# CONFIG_I8K is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_IBM_RTL is not set +# CONFIG_IE6XX_WDT is not set +# CONFIG_IEEE802154 is not set +CONFIG_ILLEGAL_POINTER_VALUE=0 +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_INSTRUCTION_DECODER=y +# CONFIG_INTEL_POWERCLAMP is not set +# CONFIG_IOMMU_STRESS is not set +# CONFIG_IOSF_MBI is not set +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +# CONFIG_IO_DELAY_UDELAY is not set +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +# CONFIG_ISA is not set +CONFIG_ISA_DMA_API=y +# CONFIG_IT8712F_WDT is not set +# CONFIG_IT87_WDT is not set +# CONFIG_ITCO_WDT is not set +CONFIG_JBD2=y +CONFIG_KALLSYMS=y +CONFIG_KEXEC=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_M486=y +# CONFIG_M586 is not set +# CONFIG_M586MMX is not set +# CONFIG_M586TSC is not set +# CONFIG_M686 is not set +# CONFIG_MACHZ_WDT is not set +CONFIG_MATH_EMULATION=y +# CONFIG_MATOM is not set +# CONFIG_MCORE2 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MELAN is not set +# CONFIG_MEMTEST is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MICROCODE is not set +# CONFIG_MICROCODE_AMD_EARLY is not set +# CONFIG_MICROCODE_INTEL_EARLY is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MPENTIUM4 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +CONFIG_MTD_BLOCK2MTD=y +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTRR=y +# CONFIG_MTRR_SANITIZER is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MWINCHIPC6 is not set +CONFIG_NAMESPACES=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_NEED_SG_DMA_LENGTH=y +# CONFIG_NET5501 is not set +# CONFIG_NET_NS is not set +CONFIG_NOHIGHMEM=y +CONFIG_NO_BOOTMEM=y +CONFIG_NR_CPUS=1 +# CONFIG_NSC_GPIO is not set +# CONFIG_NTB is not set +CONFIG_NVRAM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +# CONFIG_OLPC is not set +CONFIG_OPROFILE_NMI_TIMER=y +# CONFIG_OPTIMIZE_INLINING is not set +CONFIG_OUTPUT_FORMAT="elf32-i386" +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PC8736x_GPIO is not set +# CONFIG_PC87413_WDT is not set +CONFIG_PCI=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_GOANY=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GODIRECT is not set +# CONFIG_PCI_GOMMCONFIG is not set +CONFIG_PCI_MSI=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_PERF_EVENTS=y +CONFIG_PERF_EVENTS_INTEL_UNCORE=y +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_PMC_ATOM=y +CONFIG_POWER_SUPPLY=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_PROCESSOR_SELECT is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RD_BZIP2=y +CONFIG_RD_GZIP=y +# CONFIG_RELOCATABLE is not set +CONFIG_RTC_CLASS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_SBC7240_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +CONFIG_SCHED_HRTICK=y +CONFIG_SCSI=y +CONFIG_SCx200=y +CONFIG_SCx200HR_TIMER=y +# CONFIG_SCx200_GPIO is not set +# CONFIG_SCx200_WDT is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIO=y +# CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_I8042=y +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_SMSC_SCH311X_WDT is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPARSE_IRQ=y +CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +# CONFIG_TELCLOCK is not set +CONFIG_THERMAL=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_EMULATION is not set +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +CONFIG_THERMAL_GOV_STEP_WISE=y +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_TOSHIBA is not set +CONFIG_UID16=y +CONFIG_USB_SUPPORT=y +# CONFIG_USER_NS is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_VGA_CONSOLE=y +# CONFIG_VIA_WDT is not set +CONFIG_VM86=y +# CONFIG_VMWARE_VMCI is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_WAFER_WDT is not set +CONFIG_X86=y +# CONFIG_X86_16BIT is not set +CONFIG_X86_32=y +# CONFIG_X86_32_IRIS is not set +CONFIG_X86_32_LAZY_GS=y +CONFIG_X86_ALIGNMENT_16=y +# CONFIG_X86_ANCIENT_MCE is not set +# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set +# CONFIG_X86_CPUFREQ_NFORCE2 is not set +# CONFIG_X86_CPUID is not set +# CONFIG_X86_EXTENDED_PLATFORM is not set +CONFIG_X86_F00F_BUG=y +CONFIG_X86_FEATURE_NAMES=y +CONFIG_X86_GENERIC=y +# CONFIG_X86_GX_SUSPMOD is not set +# CONFIG_X86_INTEL_PSTATE is not set +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 +CONFIG_X86_INVD_BUG=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_LOCAL_APIC=y +# CONFIG_X86_LONGRUN is not set +CONFIG_X86_MCE=y +CONFIG_X86_MCE_AMD=y +# CONFIG_X86_MCE_INJECT is not set +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_THRESHOLD=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MPPARSE=y +CONFIG_X86_MSR=y +# CONFIG_X86_P4_CLOCKMOD is not set +# CONFIG_X86_PAE is not set +CONFIG_X86_PAT=y +CONFIG_X86_PLATFORM_DEVICES=y +# CONFIG_X86_POWERNOW_K6 is not set +# CONFIG_X86_POWERNOW_K7 is not set +CONFIG_X86_PPRO_FENCE=y +# CONFIG_X86_PTDUMP is not set +# CONFIG_X86_REBOOTFIXUPS is not set +CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y +CONFIG_X86_RESERVE_LOW=64 +# CONFIG_X86_SMAP is not set +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_SPEEDSTEP_ICH is not set +# CONFIG_X86_SPEEDSTEP_LIB is not set +# CONFIG_X86_SPEEDSTEP_SMI is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y +CONFIG_X86_THERMAL_VECTOR=y +CONFIG_X86_UP_APIC=y +CONFIG_X86_UP_APIC_MSI=y +CONFIG_X86_UP_IOAPIC=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_XZ_DEC_X86=y +CONFIG_ZLIB_INFLATE=y +# CONFIG_ZONE_DMA32 is not set diff --git a/trunk/target/linux/x86/ep80579/config-3.3 b/trunk/target/linux/x86/ep80579/config-3.3 new file mode 100644 index 00000000..78ee0ce7 --- /dev/null +++ b/trunk/target/linux/x86/ep80579/config-3.3 @@ -0,0 +1,11 @@ +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_HIGHMEM=y +CONFIG_HIGHMEM4G=y +# CONFIG_HIGHPTE is not set +# CONFIG_ITCO_VENDOR_SUPPORT is not set +CONFIG_ITCO_WDT=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_MTD is not set +# CONFIG_NOHIGHMEM is not set +CONFIG_SATA_AHCI=y +# CONFIG_SQUASHFS is not set diff --git a/trunk/target/linux/x86/ep80579/target.mk b/trunk/target/linux/x86/ep80579/target.mk new file mode 100644 index 00000000..1f02f1e2 --- /dev/null +++ b/trunk/target/linux/x86/ep80579/target.mk @@ -0,0 +1,11 @@ +BOARDNAME:=Intel EP80579 +KERNEL_PATCHVER:=3.3 +DEFAULT_PACKAGES += kmod-ep80579-can kmod-ep80579-eth kmod-ep80579-misc \ + kmod-usb-core kmod-usb2 kmod-usb-hid kmod-usb-uhci +FEATURES += broken + +define Target/Description + Build firmware images for Intel EP80579 based boards + (e.g : ADI Engineering Ocracoke Island) +endef + diff --git a/trunk/target/linux/x86/generic/config-default b/trunk/target/linux/x86/generic/config-default new file mode 100644 index 00000000..eb4b357e --- /dev/null +++ b/trunk/target/linux/x86/generic/config-default @@ -0,0 +1,200 @@ +# CONFIG_3C515 is not set +CONFIG_ACPI=y +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +# CONFIG_ACPI_CMPC is not set +# CONFIG_ACPI_CONTAINER is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_EC_DEBUGFS is not set +# CONFIG_ACPI_FAN is not set +# CONFIG_ACPI_I2C_OPREGION is not set +# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set +CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_PROCESSOR=y +# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set +# CONFIG_ACPI_PROCFS_POWER is not set +# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set +# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_VIDEO=y +# CONFIG_ACPI_WMI is not set +CONFIG_AGP=y +# CONFIG_AGP_ALI is not set +# CONFIG_AGP_AMD is not set +# CONFIG_AGP_AMD64 is not set +# CONFIG_AGP_ATI is not set +# CONFIG_AGP_EFFICEON is not set +CONFIG_AGP_INTEL=y +# CONFIG_AGP_NVIDIA is not set +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_SWORKS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_APPLE_GMUX is not set +CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_APPLE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_BACKLIGHT_SAHARA is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_DELL_SMO8800 is not set +CONFIG_DMA_SHARED_BUFFER=y +CONFIG_DMI=y +# CONFIG_DMIID is not set +CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y +# CONFIG_DMI_SYSFS is not set +CONFIG_DRM=y +# CONFIG_DRM_AST is not set +CONFIG_DRM_BOCHS=y +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_GMA500 is not set +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_I2C_SIL164 is not set +# CONFIG_DRM_I810 is not set +CONFIG_DRM_I915=y +CONFIG_DRM_I915_FBDEV=y +CONFIG_DRM_I915_KMS=y +# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_KMS_HELPER=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_PTN3460 is not set +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_TDFX is not set +CONFIG_DRM_TTM=y +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_VMWGFX is not set +# CONFIG_EFI is not set +# CONFIG_EISA is not set +# CONFIG_EL3 is not set +CONFIG_FB=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_CMDLINE=y +# CONFIG_FB_I810 is not set +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_VESA is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x16=y +CONFIG_FONT_8x8=y +CONFIG_FONT_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_GEOS is not set +CONFIG_HAVE_ACPI_APEI=y +CONFIG_HAVE_ACPI_APEI_NMI=y +CONFIG_HDMI=y +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HPET=y +CONFIG_HPET_MMAP=y +# CONFIG_HP_ACCEL is not set +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y +CONFIG_INPUT_MOUSE=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INT340X_THERMAL is not set +CONFIG_INTEL_GTT=y +CONFIG_INTEL_IDLE=y +# CONFIG_INTEL_IPS is not set +# CONFIG_INTEL_MENLOW is not set +CONFIG_INTERVAL_TREE=y +CONFIG_ISA=y +CONFIG_ISAPNP=y +# CONFIG_ISCSI_IBFT_FIND is not set +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_LANCE is not set +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_LEDS_CLEVO_MAIL is not set +# CONFIG_MDA_CONSOLE is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +# CONFIG_MOUSE_PS2_CYPRESS is not set +# CONFIG_MOUSE_PS2_ELANTECH is not set +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +CONFIG_NLS=y +CONFIG_NO_HZ=y +# CONFIG_PANASONIC_LAPTOP is not set +CONFIG_PATA_AMD=y +CONFIG_PATA_LEGACY=y +CONFIG_PATA_MPIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_SC1200=y +CONFIG_PATA_VIA=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_IOAPIC=y +CONFIG_PCI_LABEL=y +CONFIG_PCI_MMCONFIG=y +# CONFIG_PCWATCHDOG is not set +CONFIG_PNP=y +CONFIG_PNPACPI=y +# CONFIG_PNPBIOS is not set +CONFIG_PNP_DEBUG_MESSAGES=y +# CONFIG_PVPANIC is not set +CONFIG_RAS=y +# CONFIG_SAMSUNG_Q10 is not set +CONFIG_SATA_AHCI=y +# CONFIG_SCx200_ACB is not set +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_PNP=y +# CONFIG_THINKPAD_ACPI is not set +# CONFIG_TOPSTAR_LAPTOP is not set +# CONFIG_TOSHIBA_BT_RFKILL is not set +# CONFIG_TOSHIBA_HAPS is not set +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_STORAGE=y +CONFIG_USB_UHCI_HCD=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +# CONFIG_WDT is not set +# CONFIG_X86_ACPI_CPUFREQ is not set +# CONFIG_X86_E_POWERSAVER is not set +# CONFIG_X86_INTEL_LPSS is not set +# CONFIG_X86_LONGHAUL is not set +# CONFIG_X86_PCC_CPUFREQ is not set +CONFIG_X86_PM_TIMER=y diff --git a/trunk/target/linux/x86/generic/profiles/000-Generic.mk b/trunk/target/linux/x86/generic/profiles/000-Generic.mk new file mode 100644 index 00000000..90f989a9 --- /dev/null +++ b/trunk/target/linux/x86/generic/profiles/000-Generic.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2006-2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Generic + NAME:=Generic + PACKAGES:=kmod-3c59x kmod-e100 kmod-e1000 kmod-natsemi kmod-ne2k-pci \ + kmod-pcnet32 kmod-8139too kmod-r8169 kmod-sis900 kmod-tg3 \ + kmod-via-rhine kmod-via-velocity +endef + +define Profile/Generic/Description + Generic Profile +endef +$(eval $(call Profile,Generic)) diff --git a/trunk/target/linux/x86/generic/target.mk b/trunk/target/linux/x86/generic/target.mk new file mode 100644 index 00000000..7191292e --- /dev/null +++ b/trunk/target/linux/x86/generic/target.mk @@ -0,0 +1,7 @@ +BOARDNAME:=Generic + +define Target/Description + Build firmware images for x86 based boards + (e.g : Soekris, ...) +endef + diff --git a/trunk/target/linux/x86/geode/config-default b/trunk/target/linux/x86/geode/config-default new file mode 100644 index 00000000..f4efab06 --- /dev/null +++ b/trunk/target/linux/x86/geode/config-default @@ -0,0 +1,73 @@ +# CONFIG_3C515 is not set +CONFIG_8139CP=y +CONFIG_8139TOO=y +CONFIG_8139TOO_8129=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_ALIX=y +# CONFIG_ATA_PIIX is not set +CONFIG_CS5535_CLOCK_EVENT_SRC=y +CONFIG_CS5535_MFGPT=y +CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7 +# CONFIG_EISA is not set +# CONFIG_EL3 is not set +CONFIG_GEODE_WDT=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_CS5535=y +CONFIG_GPIO_DEVRES=y +# CONFIG_GPIO_F7188X is not set +# CONFIG_GPIO_INTEL_MID is not set +CONFIG_GPIO_SYSFS=y +# CONFIG_HIGHMEM64G is not set +CONFIG_HWMON=y +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCA=y +CONFIG_I2C_ALGOPCF=y +CONFIG_I2C_BOARDINFO=y +CONFIG_ISA=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_LANCE is not set +CONFIG_LEDS_GPIO=y +# CONFIG_M486 is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_MFD_CORE=y +CONFIG_MFD_CS5535=y +CONFIG_MGEODEGX1=y +# CONFIG_MIXCOMWD is not set +CONFIG_NATSEMI=y +CONFIG_NET5501=y +CONFIG_NLS=y +CONFIG_NSC_GPIO=y +CONFIG_PATA_CS5520=y +CONFIG_PATA_CS5530=y +CONFIG_PATA_CS5535=y +CONFIG_PATA_CS5536=y +CONFIG_PATA_SC1200=y +CONFIG_PC8736x_GPIO=y +# CONFIG_PCWATCHDOG is not set +# CONFIG_PNP is not set +CONFIG_SC1200_WDT=y +CONFIG_SCx200_ACB=y +CONFIG_SCx200_WDT=y +CONFIG_SENSORS_LM90=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +# CONFIG_USB_UHCI_HCD is not set +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +CONFIG_VIA_RHINE=y +CONFIG_VIA_RHINE_MMIO=y +# CONFIG_WDT is not set +CONFIG_X86_CPUID=y +CONFIG_X86_DEBUGCTLMSR=y +# CONFIG_X86_MCE is not set +CONFIG_X86_REBOOTFIXUPS=y +CONFIG_X86_TSC=y diff --git a/trunk/target/linux/x86/geode/target.mk b/trunk/target/linux/x86/geode/target.mk new file mode 100644 index 00000000..57ccdc6c --- /dev/null +++ b/trunk/target/linux/x86/geode/target.mk @@ -0,0 +1,14 @@ +BOARDNAME:=AMD Geode based systems +FEATURES:=squashfs ext4 pci usb gpio +DEFAULT_PACKAGES += \ + kmod-crypto-hw-geode kmod-crypto-ocf kmod-crypto-aes kmod-crypto-cbc \ + kmod-ath5k kmod-ath9k \ + kmod-button-hotplug \ + kmod-ledtrig-heartbeat kmod-ledtrig-gpio \ + kmod-ledtrig-netdev hwclock wpad-mini + +CPU_TYPE := geode + +define Target/Description + Build firmware images for AMD Geode GX/LX based systems (net5501, alix, geos) +endef diff --git a/trunk/target/linux/x86/image/Config.in b/trunk/target/linux/x86/image/Config.in new file mode 100644 index 00000000..f232c647 --- /dev/null +++ b/trunk/target/linux/x86/image/Config.in @@ -0,0 +1,14 @@ +config X86_ETHERBOOT_IMAGES + bool "Build Etherboot image" + depends on TARGET_x86_thincan_DBE61 + default y + help + Builds network bootable image for ThinCan DBE61 (Etherboot BIOS) + +config X86_ETHERBOOT_BOOTOPTS + string "Extra kernel boot options" + depends on X86_ETHERBOOT_IMAGES + default "ip=dhcp nbdport=2000 " if TARGET_ROOTFS_SQUASHFS + default "ip=dhcp root=/dev/nfs nfsroot=192.168.0.1:/srv/dbe61" + help + Kernel arguments to pass to the kernel eg. NFS root location etc. diff --git a/trunk/target/linux/x86/image/Makefile b/trunk/target/linux/x86/image/Makefile new file mode 100644 index 00000000..e7e02f15 --- /dev/null +++ b/trunk/target/linux/x86/image/Makefile @@ -0,0 +1,234 @@ +# +# Copyright (C) 2006-2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +export PATH=$(TARGET_PATH):/sbin + +GRUB2_MODULES = biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga +GRUB2_MODULES_ISO = biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial vga +GRUB_TERMINALS = +GRUB_SERIAL_CONFIG = +GRUB_TERMINAL_CONFIG = +GRUB_CONSOLE_CMDLINE = + +USE_ATKBD = generic kvm_guest + +ifneq ($(strip $(foreach subtarget,$(USE_ATKBD),$(CONFIG_TARGET_x86_$(subtarget)))),) + GRUB2_MODULES += at_keyboard + GRUB2_MODULES_ISO += at_keyboard +endif + +ifneq ($(CONFIG_GRUB_CONSOLE),) + GRUB_CONSOLE_CMDLINE += console=tty0 + GRUB_TERMINALS += console +endif + +GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL)) + +ifneq ($(GRUB_SERIAL),) + GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8 + GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=off + GRUB_TERMINALS += serial +endif + +ifneq ($(GRUB_TERMINALS),) + GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS) +endif + +SIGNATURE:=$(shell dd if=/dev/urandom bs=4 count=1 2>/dev/null | hexdump -v -e '"%08x"') +ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME)) +ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(SIGNATURE)-02) + +GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT)) + +ifneq ($(CONFIG_GRUB_IMAGES),) + + BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS)) + + define Image/cmdline/ext4 + root=$(ROOTPART) rootfstype=ext4 rootwait + endef + + define Image/cmdline/jffs2-64k + block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait + endef + + define Image/cmdline/jffs2-128k + block2mtd.block2mtd=$(ROOTPART),131072,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait + endef + + define Image/cmdline/squashfs + block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=squashfs rootwait + endef + + define Image/Build/grub2 + # left here because the image builder doesnt need these + $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2 + $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz + grub-mkimage \ + -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \ + -o $(KDIR)/grub2/core.img \ + -O i386-pc \ + -c ./grub-early.cfg \ + $(GRUB2_MODULES) + $(CP) $(STAGING_DIR_HOST)/lib/grub/i386-pc/*.img $(KDIR)/grub2/ + echo '(hd0) $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img' > $(KDIR)/grub2/device.map + sed \ + -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \ + -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \ + -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \ + -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \ + ./grub.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg + PADDING="$(CONFIG_TARGET_IMAGES_PAD)" SIGNATURE="$(SIGNATURE)" PATH="$(TARGET_PATH)" ./gen_image_generic.sh \ + $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \ + $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \ + $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1) \ + 256 + grub-bios-setup \ + --device-map="$(KDIR)/grub2/device.map" \ + -d "$(KDIR)/grub2" \ + -r "hd0,msdos1" \ + "$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img" + $(call Image/Build/grub/$(1)) + endef +endif + +ROOTDELAY=10 + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) +endef + +define Image/Build/iso + $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2 + $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz + grub-mkimage \ + -d $(STAGING_DIR_HOST)/lib/grub/i386-pc \ + -o $(KDIR)/grub2/eltorito.img \ + -O i386-pc \ + -c ./grub-early.cfg \ + $(GRUB2_MODULES_ISO) + cat \ + $(STAGING_DIR_HOST)/lib/grub/i386-pc/cdboot.img \ + $(KDIR)/grub2/eltorito.img \ + > $(KDIR)/root.grub/boot/grub/eltorito.img + sed \ + -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \ + -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \ + -e 's#@CMDLINE@#root=/dev/sr0 rootfstype=iso9660 rootwait $(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \ + -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \ + ./grub-iso.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg + $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz + mkisofs -R -b boot/grub/eltorito.img -no-emul-boot -boot-info-table \ + -o $(KDIR)/root.iso $(KDIR)/root.grub $(TARGET_DIR) +endef + +ifneq ($(CONFIG_VDI_IMAGES),) + define Image/Build/vdi + rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true + qemu-img convert -f raw -O vdi \ + $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \ + $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi + # XXX: VBoxManage insists on setting perms to 0600 + chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi + endef +endif + +ifneq ($(CONFIG_VMDK_IMAGES),) + define Image/Build/vmdk + rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true + qemu-img convert -f raw -O vmdk \ + $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \ + $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk + endef +endif + +define Image/Build/gzip + gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img + gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img +endef + +ifneq ($(CONFIG_TARGET_IMAGES_GZIP),) + define Image/Build/gzip/ext4 + $(call Image/Build/gzip,ext4) + endef + ifneq ($(CONFIG_TARGET_IMAGES_PAD),) + define Image/Build/gzip/squashfs + $(call Image/Build/gzip,squashfs) + endef + define Image/Build/gzip/jffs2-64k + $(call Image/Build/gzip,jffs2-64k) + endef + define Image/Build/gzip/jffs2-128k + $(call Image/Build/gzip,jffs2-128k) + endef + endif +endif + +define Image/BuildKernel + $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz + ifneq ($(CONFIG_X86_ETHERBOOT_IMAGES),) + rm -f $(BIN_DIR)/$(IMG_PREFIX)-etherboot + $(STAGING_DIR_HOST)/bin/mkelfImage \ + --append=$(CONFIG_X86_ETHERBOOT_BOOTOPTS) \ + $(KDIR)/bzImage \ + $(BIN_DIR)/$(IMG_PREFIX)-etherboot + endif +endef + +define Image/Build/Profile/ar525w + cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp + $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32 + $(STAGING_DIR_HOST)/bin/airlink -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \ + $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w.img + $(STAGING_DIR_HOST)/bin/airlink -e -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \ + $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w-web.img +endef + +define Image/Build/Profile/sitecom + cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp + #32k config data + 20 bytes header + 2 bytes checksum after kernel image + $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32790 + $(TOPDIR)/target/linux/rdc/image/mkimg_sitecom.pl $(KDIR)/bzImage.tmp > $(KDIR)/tmp.img + cat $(KDIR)/root.$(1) >> $(KDIR)/tmp.img + cp $(KDIR)/tmp.img $(BIN_DIR)/$(IMG_PREFIX)-$(1)-sitecom.img + rm $(KDIR)/tmp.img $(KDIR)/bzImage.tmp +endef + +define Image/Build/Profile/bifferboard + $(TOPDIR)/target/linux/rdc/image/mkimg_bifferboard.py $(KDIR)/bzImage $(KDIR)/root.$(1) \ + $(BIN_DIR)/$(IMG_PREFIX)-$(1)-bifferboard.img +endef + +define Image/Prepare + $(call Image/Prepare/grub2) +endef + +define Image/Build/Initramfs + $(CP) $(KDIR)/bzImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-ramfs.bzImage +endef + +define Image/Build + $(call Image/Build/$(1)) + ifneq ($(1),iso) + $(call Image/Build/grub2,$(1)) + $(call Image/Build/vdi,$(1)) + $(call Image/Build/vmdk,$(1)) + $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img + else + $(CP) $(KDIR)/root.iso $(BIN_DIR)/$(IMG_PREFIX).iso + endif + $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz + $(call Image/Build/gzip/$(1)) + $(call Image/Build/Profile/$(PROFILE),$(1)) +ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) + $(call Image/Build/Initramfs) +endif +endef + +$(eval $(call BuildImage)) diff --git a/trunk/target/linux/x86/image/gen_image_generic.sh b/trunk/target/linux/x86/image/gen_image_generic.sh new file mode 100755 index 00000000..17d969b9 --- /dev/null +++ b/trunk/target/linux/x86/image/gen_image_generic.sh @@ -0,0 +1,37 @@ +#!/usr/bin/env bash +# Copyright (C) 2006-2012 OpenWrt.org +set -x +[ $# == 5 -o $# == 6 ] || { + echo "SYNTAX: $0 []" + exit 1 +} + +OUTPUT="$1" +KERNELSIZE="$2" +KERNELDIR="$3" +ROOTFSSIZE="$4" +ROOTFSIMAGE="$5" +ALIGN="$6" + +rm -f "$OUTPUT" + +head=16 +sect=63 +cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512))) + +# create partition table +set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m ${ALIGN:+-l $ALIGN} ${SIGNATURE:+-S 0x$SIGNATURE}` + +KERNELOFFSET="$(($1 / 512))" +KERNELSIZE="$2" +ROOTFSOFFSET="$(($3 / 512))" +ROOTFSSIZE="$(($4 / 512))" + +[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE" +dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc + +[ -n "$NOGRUB" ] && exit 0 + +make_ext4fs -J -l "$KERNELSIZE" "$OUTPUT.kernel" "$KERNELDIR" +dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc +rm -f "$OUTPUT.kernel" diff --git a/trunk/target/linux/x86/image/grub-early.cfg b/trunk/target/linux/x86/image/grub-early.cfg new file mode 100644 index 00000000..4a5b5a60 --- /dev/null +++ b/trunk/target/linux/x86/image/grub-early.cfg @@ -0,0 +1 @@ +configfile (hd0,msdos1)/boot/grub/grub.cfg diff --git a/trunk/target/linux/x86/image/grub-iso.cfg b/trunk/target/linux/x86/image/grub-iso.cfg new file mode 100644 index 00000000..6a494377 --- /dev/null +++ b/trunk/target/linux/x86/image/grub-iso.cfg @@ -0,0 +1,10 @@ +@SERIAL_CONFIG@ +@TERMINAL_CONFIG@ + +set default="0" +set timeout="@TIMEOUT@" +set root='(cd)' + +menuentry "libreCMC" { + linux /boot/vmlinuz @CMDLINE@ noinitrd +} diff --git a/trunk/target/linux/x86/image/grub.cfg b/trunk/target/linux/x86/image/grub.cfg new file mode 100644 index 00000000..e1c1c74f --- /dev/null +++ b/trunk/target/linux/x86/image/grub.cfg @@ -0,0 +1,13 @@ +@SERIAL_CONFIG@ +@TERMINAL_CONFIG@ + +set default="0" +set timeout="@TIMEOUT@" +set root='(hd0,msdos1)' + +menuentry "libreCMC" { + linux /boot/vmlinuz @CMDLINE@ noinitrd +} +menuentry "libreCMC (failsafe)" { + linux /boot/vmlinuz failsafe=true @CMDLINE@ noinitrd +} diff --git a/trunk/target/linux/x86/image/mkimg_bifferboard.py b/trunk/target/linux/x86/image/mkimg_bifferboard.py new file mode 100755 index 00000000..5444abeb --- /dev/null +++ b/trunk/target/linux/x86/image/mkimg_bifferboard.py @@ -0,0 +1,50 @@ +#!/usr/bin/env python + +""" + Create firmware for 4/8MB Bifferboards, suitable for uploading using + either bb_upload8.py or bb_eth_upload8.py +""" + +import struct, sys + +# Increase the kmax value if the script gives errors about the kernel being +# too large. You need to set the Biffboot kmax value to the same value you +# use here. +kmax = 0x10 + +# No need to change this for 4MB devices, it's only used to tell you if +# the firmware is too large! +flash_size = 0x800000 + +# This is always the same, for 1MB, 4MB and 8MB devices +config_extent = 0x6000 + +kernel_extent = kmax * 0x10000 + +if __name__ == "__main__": + + if len(sys.argv) != 4: + print "usage: mkimg_bifferboard.py " + sys.exit(-1) + + bzimage = sys.argv[1] + rootfs = sys.argv[2] + target = sys.argv[3] + + # Kernel first + fw = file(bzimage).read() + if len(fw) > (kernel_extent - config_extent): + raise IOError("Kernel too large") + + # Pad up to end of kernel partition + while len(fw) < (kernel_extent - config_extent): + fw += "\xff" + + fw += file(rootfs).read() + + # Check length of total + if len(fw) > (flash_size - 0x10000 - config_extent): + raise IOError("Rootfs too large") + + file(target,"wb").write(fw) + print "Firmware written to '%s'" % target diff --git a/trunk/target/linux/x86/image/mkimg_sitecom.pl b/trunk/target/linux/x86/image/mkimg_sitecom.pl new file mode 100755 index 00000000..cfd5e652 --- /dev/null +++ b/trunk/target/linux/x86/image/mkimg_sitecom.pl @@ -0,0 +1,11 @@ +#!/usr/bin/perl + +open (bzimg, @ARGV[0]); +while () { $i .= $_; } +$i .= pack "v", -(unpack "%v*", $i); +print "CSYS"; +print pack("V", length($i)); +print pack("V", 0); +print "WRRM"; +print pack("V", length($i)); +print $i; diff --git a/trunk/target/linux/x86/kvm_guest/config-default b/trunk/target/linux/x86/kvm_guest/config-default new file mode 100644 index 00000000..f26e2681 --- /dev/null +++ b/trunk/target/linux/x86/kvm_guest/config-default @@ -0,0 +1,89 @@ +CONFIG_ACPI=y +# CONFIG_ACPI_AC is not set +# CONFIG_ACPI_BATTERY is not set +CONFIG_ACPI_BUTTON=y +# CONFIG_ACPI_CMPC is not set +# CONFIG_ACPI_CONTAINER is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_EC_DEBUGFS is not set +# CONFIG_ACPI_FAN is not set +# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set +CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_PROCESSOR=y +# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set +# CONFIG_ACPI_PROCFS_POWER is not set +# CONFIG_ACPI_SBS is not set +# CONFIG_ACPI_THERMAL is not set +# CONFIG_ACPI_WMI is not set +CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y +# CONFIG_ASUS_LAPTOP is not set +CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_EEEPC_LAPTOP is not set +# CONFIG_EFI is not set +CONFIG_HAVE_ACPI_APEI=y +CONFIG_HAVE_ACPI_APEI_NMI=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +# CONFIG_HOTPLUG_PCI_COMPAQ is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_IBM is not set +CONFIG_HOTPLUG_PCI_PCIE=y +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HPET is not set +# CONFIG_HP_ACCEL is not set +CONFIG_HVC_DRIVER=y +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HYPERVISOR_GUEST=y +# CONFIG_INTEL_IPS is not set +# CONFIG_ISCSI_IBFT_FIND is not set +# CONFIG_KVM is not set +# CONFIG_KVM_DEBUG_FS is not set +CONFIG_KVM_GUEST=y +# CONFIG_LGUEST is not set +# CONFIG_LGUEST_GUEST is not set +CONFIG_NLS=y +CONFIG_NO_HZ=y +CONFIG_PARAVIRT=y +CONFIG_PARAVIRT_CLOCK=y +# CONFIG_PARAVIRT_DEBUG is not set +CONFIG_PARAVIRT_TIME_ACCOUNTING=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_IOAPIC=y +CONFIG_PCI_LABEL=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PNP=y +CONFIG_PNPACPI=y +CONFIG_PNP_DEBUG_MESSAGES=y +# CONFIG_PVPANIC is not set +CONFIG_RAS=y +# CONFIG_SAMSUNG_Q10 is not set +# CONFIG_SCSI_VIRTIO is not set +CONFIG_SERIAL_8250_PNP=y +# CONFIG_THINKPAD_ACPI is not set +# CONFIG_TOPSTAR_LAPTOP is not set +# CONFIG_TOSHIBA_BT_RFKILL is not set +# CONFIG_VHOST_NET is not set +CONFIG_VIRTIO=y +CONFIG_VIRTIO_BLK=y +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_VIRTIO_NET is not set +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTUALIZATION=y +# CONFIG_VMWARE_BALLOON is not set +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_X86_ACPI_CPUFREQ is not set +# CONFIG_X86_E_POWERSAVER is not set +# CONFIG_X86_GENERIC is not set +# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_INTERNODE_CACHE_SHIFT=4 +CONFIG_X86_L1_CACHE_SHIFT=4 +# CONFIG_X86_LONGHAUL is not set +# CONFIG_X86_PAT is not set +# CONFIG_X86_PCC_CPUFREQ is not set +CONFIG_X86_PM_TIMER=y +# CONFIG_X86_PPRO_FENCE is not set diff --git a/trunk/target/linux/x86/kvm_guest/target.mk b/trunk/target/linux/x86/kvm_guest/target.mk new file mode 100644 index 00000000..d3f950fe --- /dev/null +++ b/trunk/target/linux/x86/kvm_guest/target.mk @@ -0,0 +1,3 @@ +BOARDNAME:=KVM Guest +FEATURES:=ext4 pci usb +DEFAULT_PACKAGES += kmod-virtio-balloon kmod-virtio-net kmod-virtio-random diff --git a/trunk/target/linux/x86/modules.mk b/trunk/target/linux/x86/modules.mk new file mode 100644 index 00000000..3abe0174 --- /dev/null +++ b/trunk/target/linux/x86/modules.mk @@ -0,0 +1,22 @@ +# +# Copyright (C) 2006-2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define KernelPackage/rdc321x-wdt + SUBMENU:=$(OTHER_MENU) + TITLE:=RDC321x watchdog + DEPENDS:=@TARGET_x86_rdc + KCONFIG:=CONFIG_RDC321X_WDT + FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/rdc321x_wdt.ko + AUTOLOAD:=$(call AutoLoad,50,rdc321x_wdt) +endef + +define KernelPackage/rdc321x-wdt/description + RDC-321x watchdog driver +endef + +$(eval $(call KernelPackage,rdc321x-wdt)) + diff --git a/trunk/target/linux/x86/patches-3.18/006-yenta_mistery.patch b/trunk/target/linux/x86/patches-3.18/006-yenta_mistery.patch new file mode 100644 index 00000000..72144cb0 --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/006-yenta_mistery.patch @@ -0,0 +1,20 @@ +--- a/drivers/pcmcia/yenta_socket.c ++++ b/drivers/pcmcia/yenta_socket.c +@@ -1233,6 +1233,17 @@ static int yenta_probe(struct pci_dev *d + + /* We must finish initialization here */ + ++#ifdef CONFIG_X86_RDC321X ++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */ ++#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060 ++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */ ++ ++ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK); ++ config_writel(socket, 35*4, 0x00000022); ++ config_writel(socket, 36*4, 0x60200000); ++ config_writel(socket, 40*4, 0x7e020000); ++#endif ++ + if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) { + /* No IRQ or request_irq failed. Poll */ + socket->cb_irq = 0; /* But zero is a valid IRQ number. */ diff --git a/trunk/target/linux/x86/patches-3.18/009-rdc321x_select_embedded.patch b/trunk/target/linux/x86/patches-3.18/009-rdc321x_select_embedded.patch new file mode 100644 index 00000000..e1599e4f --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/009-rdc321x_select_embedded.patch @@ -0,0 +1,11 @@ +--- a/arch/x86/Kconfig ++++ b/arch/x86/Kconfig +@@ -531,6 +531,8 @@ config X86_RDC321X + depends on X86_EXTENDED_PLATFORM + select M486 + select X86_REBOOTFIXUPS ++ select EMBEDDED ++ select ARCH_REQUIRE_GPIOLIB + ---help--- + This option is needed for RDC R-321x system-on-chip, also known + as R-8610-(G). diff --git a/trunk/target/linux/x86/patches-3.18/010-rdc_cpu_ident.patch b/trunk/target/linux/x86/patches-3.18/010-rdc_cpu_ident.patch new file mode 100644 index 00000000..1f153fc6 --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/010-rdc_cpu_ident.patch @@ -0,0 +1,176 @@ +--- /dev/null ++++ b/Documentation/x86/rdc.txt +@@ -0,0 +1,69 @@ ++ ++Introduction ++============ ++ ++RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC ++(system-on-chips) for a number of years. They are not the fastest of ++CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility ++coupled with very low power consumption[1] and low cost make them ideal ++for embedded applications. ++ ++ ++Where to find ++============= ++ ++RDC chips show up in numerous embedded devices, but be careful since ++many of them will not run Linux 2.6 without significant expertise. ++ ++There are several variants of what the linux kernel refers to generically ++as RDC321X: R8610, R321x, S3282 and AMRISC20000. ++ ++R321x: Found in various routers, see the libreCMC project for details, ++ http://wiki.librecmc.org/oldwiki/rdcport ++ ++R8610: Found on the RDC evaluation board ++ http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/ ++ ++AMRISC20000: Found in the MGB-100 wireless hard disk ++ http://tintuc.no-ip.com/linux/tipps/mgb100/ ++ ++S3282: Found in various NAS devices, including the Bifferboard ++ http://www.bifferos.com ++ ++ ++Kernel Configuration ++==================== ++ ++Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths ++emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE ++(CONFIG_X86_MCE not selected). ++ ++ ++CPU detection ++============= ++ ++None of these chips support the cpuid instruction, so as with some ++other x86 compatible SoCs, we must check the north bridge and look ++for specific 'signature' PCI device config. ++ ++The current detection code has been tested only on the Bifferboard ++(S3282 CPU), please send bug reports or success stories with ++other devices to bifferos@yahoo.co.uk. ++ ++ ++Credits ++======= ++ ++Many thanks to RDC for providing the customer codes to allow ++detection of all known variants, without which this detection code ++would have been very hard to ascertain. ++ ++ ++References ++========== ++ ++[1] S3282 in certain NAS solutions consumes less than 1W ++ ++ ++mark@bifferos.com 2009 ++ +--- a/arch/x86/Kconfig ++++ b/arch/x86/Kconfig +@@ -529,6 +529,7 @@ config X86_RDC321X + bool "RDC R-321x SoC" + depends on X86_32 + depends on X86_EXTENDED_PLATFORM ++ select PCI + select M486 + select X86_REBOOTFIXUPS + select EMBEDDED +--- a/arch/x86/include/asm/processor.h ++++ b/arch/x86/include/asm/processor.h +@@ -136,7 +136,8 @@ struct cpuinfo_x86 { + #define X86_VENDOR_CENTAUR 5 + #define X86_VENDOR_TRANSMETA 7 + #define X86_VENDOR_NSC 8 +-#define X86_VENDOR_NUM 9 ++#define X86_VENDOR_RDC 9 ++#define X86_VENDOR_NUM 10 + + #define X86_VENDOR_UNKNOWN 0xff + +--- a/arch/x86/kernel/cpu/Makefile ++++ b/arch/x86/kernel/cpu/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix + obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o + obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o + obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o ++obj-$(CONFIG_X86_RDC321X) += rdc.o + + obj-$(CONFIG_PERF_EVENTS) += perf_event.o + +--- /dev/null ++++ b/arch/x86/kernel/cpu/rdc.c +@@ -0,0 +1,69 @@ ++/* ++ * See Documentation/x86/rdc.txt ++ * ++ * mark@bifferos.com ++ */ ++ ++#include ++#include ++#include "cpu.h" ++ ++ ++static void __cpuinit rdc_identify(struct cpuinfo_x86 *c) ++{ ++ u16 vendor, device; ++ u32 customer_id; ++ ++ if (!early_pci_allowed()) ++ return; ++ ++ /* RDC CPU is SoC (system-on-chip), Northbridge is always present */ ++ vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID); ++ device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID); ++ ++ if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020) ++ return; /* not RDC */ ++ /* ++ * NB: We could go on and check other devices, e.g. r6040 NIC, but ++ * that's probably overkill ++ */ ++ ++ customer_id = read_pci_config(0, 0, 0, 0x90); ++ ++ switch (customer_id) { ++ /* id names are from RDC */ ++ case 0x00321000: ++ strcpy(c->x86_model_id, "R3210/R3211"); ++ break; ++ case 0x00321001: ++ strcpy(c->x86_model_id, "AMITRISC20000/20010"); ++ break; ++ case 0x00321002: ++ strcpy(c->x86_model_id, "R3210X/Edimax"); ++ break; ++ case 0x00321003: ++ strcpy(c->x86_model_id, "R3210/Kcodes"); ++ break; ++ case 0x00321004: /* tested */ ++ strcpy(c->x86_model_id, "S3282/CodeTek"); ++ break; ++ case 0x00321007: ++ strcpy(c->x86_model_id, "R8610"); ++ break; ++ default: ++ pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id); ++ break; ++ } ++ ++ strcpy(c->x86_vendor_id, "RDC"); ++ c->x86_vendor = X86_VENDOR_RDC; ++} ++ ++static const struct cpu_dev __cpuinitconst rdc_cpu_dev = { ++ .c_vendor = "RDC", ++ .c_ident = { "RDC" }, ++ .c_identify = rdc_identify, ++ .c_x86_vendor = X86_VENDOR_RDC, ++}; ++ ++cpu_dev_register(rdc_cpu_dev); diff --git a/trunk/target/linux/x86/patches-3.18/011-tune_lzma_options.patch b/trunk/target/linux/x86/patches-3.18/011-tune_lzma_options.patch new file mode 100644 index 00000000..4bb7b7bf --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/011-tune_lzma_options.patch @@ -0,0 +1,22 @@ +--- a/scripts/Makefile.lib ++++ b/scripts/Makefile.lib +@@ -325,7 +325,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^) + + quiet_cmd_lzma = LZMA $@ + cmd_lzma = (cat $(filter-out FORCE,$^) | \ +- lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ ++ lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) + + quiet_cmd_lzo = LZO $@ +--- a/arch/x86/include/asm/boot.h ++++ b/arch/x86/include/asm/boot.h +@@ -23,7 +23,7 @@ + #error "Invalid value for CONFIG_PHYSICAL_ALIGN" + #endif + +-#ifdef CONFIG_KERNEL_BZIP2 ++#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA) + #define BOOT_HEAP_SIZE 0x400000 + #else /* !CONFIG_KERNEL_BZIP2 */ + diff --git a/trunk/target/linux/x86/patches-3.18/012-export_erase_write.patch b/trunk/target/linux/x86/patches-3.18/012-export_erase_write.patch new file mode 100644 index 00000000..a98525ee --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/012-export_erase_write.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/mtdblock.c ++++ b/drivers/mtd/mtdblock.c +@@ -63,7 +63,7 @@ static void erase_callback(struct erase_ + wake_up(wait_q); + } + +-static int erase_write (struct mtd_info *mtd, unsigned long pos, ++int erase_write (struct mtd_info *mtd, unsigned long pos, + int len, const char *buf) + { + struct erase_info erase; +--- a/include/linux/mtd/mtd.h ++++ b/include/linux/mtd/mtd.h +@@ -416,6 +416,9 @@ extern void register_mtd_user (struct mt + extern int unregister_mtd_user (struct mtd_notifier *old); + void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size); + ++int erase_write (struct mtd_info *mtd, unsigned long pos, ++ int len, const char *buf); ++ + void mtd_erase_callback(struct erase_info *instr); + + static inline int mtd_is_bitflip(int err) { diff --git a/trunk/target/linux/x86/patches-3.18/100-rdc_boards.patch b/trunk/target/linux/x86/patches-3.18/100-rdc_boards.patch new file mode 100644 index 00000000..1f3b161a --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/100-rdc_boards.patch @@ -0,0 +1,745 @@ +--- a/arch/x86/Makefile ++++ b/arch/x86/Makefile +@@ -196,6 +196,9 @@ libs-y += arch/x86/lib/ + # See arch/x86/Kbuild for content of core part of the kernel + core-y += arch/x86/ + ++# RDC R-321X support ++core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/ ++ + # drivers-y are linked after core-y + drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ + drivers-$(CONFIG_PCI) += arch/x86/pci/ +--- /dev/null ++++ b/arch/x86/mach-rdc321x/Makefile +@@ -0,0 +1,5 @@ ++# ++# Makefile for the RDC321x specific parts of the kernel ++# ++obj-$(CONFIG_X86_RDC321X) := platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o ++ +--- /dev/null ++++ b/arch/x86/mach-rdc321x/platform.c +@@ -0,0 +1,115 @@ ++/* ++ * Generic RDC321x platform devices ++ * ++ * Copyright (C) 2007-2009 OpenWrt.org ++ * Copyright (C) 2007 Florian Fainelli ++ * Copyright (C) 2008-2009 Daniel Gimpelevich ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++static struct rdc_platform_data rdcplat_data; ++ ++/* LEDS */ ++static struct platform_device rdc321x_leds = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = &rdcplat_data.led_data, ++ } ++}; ++ ++/* Button */ ++static struct platform_device rdc321x_buttons = { ++ .name = "gpio-keys-polled", ++ .id = -1, ++ .dev = { ++ .platform_data = &rdcplat_data.button_data, ++ } ++}; ++ ++static __initdata struct platform_device *rdc321x_devs[] = { ++ &rdc321x_leds, ++ &rdc321x_buttons, ++}; ++ ++const char *__initdata boards[] = { ++ "Sitecom", ++ "AR525W", ++ "Bifferboard", ++ "R8610", ++ 0 ++}; ++ ++static struct map_info rdc_map_info = { ++ .name = "rdc_flash", ++ .size = 0x800000, /* 8MB */ ++ .phys = 0xFF800000, /* (u32) -rdc_map_info.size */ ++ .bankwidth = 2, ++}; ++ ++static int __init rdc_board_setup(void) ++{ ++ struct mtd_info *mtdinfo; ++ struct mtd_part_parser_data *ppdata; ++ int res; ++ ++ simple_map_init(&rdc_map_info); ++ ++ while (1) { ++ rdc_map_info.virt = ioremap(rdc_map_info.phys, ++ rdc_map_info.size); ++ if (rdc_map_info.virt == NULL) ++ continue; ++ ++ mtdinfo = do_map_probe("cfi_probe", &rdc_map_info); ++ if (mtdinfo == NULL) ++ mtdinfo = do_map_probe("jedec_probe", &rdc_map_info); ++ if (mtdinfo != NULL) ++ break; ++ ++ iounmap(rdc_map_info.virt); ++ if ((rdc_map_info.size >>= 1) < 0x100000) /* 1MB */ ++ panic("RDC321x: Could not find start of flash!"); ++ rdc_map_info.phys = (u32) -rdc_map_info.size; ++ } ++ ++ /* ++ * TODO: add a new field to mtd_part_parser_data, and use that ++ * instead of this ugly casting ++ */ ++ ppdata = (struct mtd_part_parser_data *) &rdcplat_data; ++ res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0); ++ if (res) { ++ panic("RDC321x: can't identify board type"); ++ return -ENOSYS; ++ } ++ ++ ROOT_DEV = 0; ++ ++ return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs)); ++} ++late_initcall(rdc_board_setup); +--- /dev/null ++++ b/arch/x86/mach-rdc321x/boards/ar525w.c +@@ -0,0 +1,251 @@ ++/* ++ * ar525w RDC321x platform devices ++ * ++ * Copyright (C) 2007-2009 OpenWrt.org ++ * Copyright (C) 2007 Florian Fainelli ++ * Copyright (C) 2008-2009 Daniel Gimpelevich ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++struct image_header { ++ char magic[4]; /* ASICII: GMTK */ ++ u32 checksum; /* CRC32 */ ++ u32 version; /* x.x.x.x */ ++ u32 kernelsz; /* The size of the kernel image */ ++ u32 imagesz; /* The length of this image file ( kernel + romfs + this header) */ ++ u32 pid; /* Product ID */ ++ u32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */ ++ u32 reserved; ++}; ++ ++static struct gpio_led ar525w_leds[] = { ++ { .name = "rdc321x:dmz", .gpio = 1, .active_low = 1}, ++}; ++static struct gpio_keys_button ar525w_btns[] = { ++ { ++ .gpio = 6, ++ .code = BTN_0, ++ .desc = "Reset", ++ .active_low = 1, ++ } ++}; ++ ++static u32 __initdata crctab[257] = { ++ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, ++ 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3, ++ 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, ++ 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, ++ 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, ++ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, ++ 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, ++ 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5, ++ 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, ++ 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, ++ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, ++ 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, ++ 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, ++ 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f, ++ 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, ++ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, ++ 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, ++ 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, ++ 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, ++ 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, ++ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, ++ 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, ++ 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, ++ 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, ++ 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, ++ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, ++ 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, ++ 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, ++ 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, ++ 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, ++ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, ++ 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, ++ 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, ++ 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, ++ 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, ++ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, ++ 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, ++ 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7, ++ 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, ++ 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, ++ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, ++ 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, ++ 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, ++ 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79, ++ 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, ++ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, ++ 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, ++ 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, ++ 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, ++ 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, ++ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, ++ 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, ++ 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, ++ 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, ++ 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, ++ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, ++ 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, ++ 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, ++ 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, ++ 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, ++ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, ++ 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf, ++ 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, ++ 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d, ++ 0 ++}; ++ ++static u32 __init crc32(u8 * buf, u32 len) ++{ ++ register int i; ++ u32 sum; ++ register u32 s0; ++ s0 = ~0; ++ for (i = 0; i < len; i++) { ++ s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]]; ++ } ++ sum = ~s0; ++ return sum; ++} ++ ++static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header) ++{ ++ char *buffer; ++ int res; ++ u32 bufferlength = header->kernelsz + sizeof(struct image_header); ++ u32 len; ++ static char crcbuf[0x400]; ++ ++ printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n", ++ header->imagesz, bufferlength); ++ ++ buffer = vmalloc(bufferlength); ++ if (!buffer) { ++ printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength); ++ return -ENOMEM; ++ } ++ ++ res = mtd_read(master, 0x0, bufferlength, &len, buffer); ++ if (res || len != bufferlength) ++ goto out; ++ ++ header = (struct image_header *) buffer; ++ header->imagesz = bufferlength; ++ header->checksum = 0; ++ header->fastcksum = 0; ++ ++ memcpy(crcbuf, buffer, 0x100); ++ memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100); ++ memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200); ++ ++ header->fastcksum = crc32(crcbuf, sizeof(crcbuf)); ++ header->checksum = crc32(buffer, bufferlength); ++ ++ res = mtd_unlock(master, 0, master->erasesize); ++ if (res != 0 && res != -EOPNOTSUPP) { ++ printk(KERN_ERR "Can't unlock image header\n"); ++ goto out; ++ } ++ ++ res = erase_write (master, 0, master->erasesize, buffer); ++ if (res) ++ printk(KERN_ERR "Can't rewrite image header\n"); ++ ++out: ++ vfree(buffer); ++ return res; ++} ++ ++static int __init ++parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts, ++ struct mtd_part_parser_data *plat_data) ++{ ++ struct image_header header; ++ int res; ++ size_t len; ++ struct mtd_partition *rdc_flash_parts; ++ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data; ++ ++ if (master->size != 0x400000) //4MB ++ return -ENOSYS; ++ ++ res = mtd_read(master, 0x0, sizeof(header), &len, (char *)&header); ++ if (res) ++ return res; ++ ++ if (strncmp(header.magic, "GMTK", 4)) ++ return -ENOSYS; ++ ++ if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) { ++ printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz); ++ return -EINVAL; ++ } ++ ++ if (header.kernelsz + sizeof(header) != header.imagesz) { ++ res = fixup_ar525w_header(master, &header); ++ if (res) ++ return res; ++ } ++ ++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL); ++ ++ rdc_flash_parts[0].name = "firmware"; ++ rdc_flash_parts[0].offset = 0x0; ++ rdc_flash_parts[0].size = 0x3E0000; ++ rdc_flash_parts[1].name = "rootfs"; ++ rdc_flash_parts[1].offset = header.kernelsz + sizeof(header); ++ rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset; ++ rdc_flash_parts[2].name = "bootloader"; ++ rdc_flash_parts[2].offset = 0x3E0000; ++ rdc_flash_parts[2].size = 0x20000; ++ ++ *pparts = rdc_flash_parts; ++ ++ pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds); ++ pdata->led_data.leds = ar525w_leds; ++ pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns); ++ pdata->button_data.buttons = ar525w_btns; ++ ++ return 3; ++} ++ ++static struct mtd_part_parser __initdata ar525w_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_ar525w_partitions, ++ .name = "AR525W", ++}; ++ ++static int __init ar525w_setup(void) ++{ ++ return register_mtd_parser(&ar525w_parser); ++} ++ ++arch_initcall(ar525w_setup); +--- /dev/null ++++ b/arch/x86/mach-rdc321x/boards/bifferboard.c +@@ -0,0 +1,74 @@ ++/* ++ * Bifferboard RDC321x platform devices ++ * ++ * Copyright (C) 2010 bifferos@yahoo.co.uk ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++static int __init ++parse_bifferboard_partitions(struct mtd_info *master, ++ struct mtd_partition **pparts, ++ struct mtd_part_parser_data *plat_data) ++{ ++ int res; ++ size_t len; ++ struct mtd_partition *rdc_flash_parts; ++ u32 kernel_len; ++ u16 tmp; ++ ++ res = mtd_read(master, 0x4000 + 1036, 2, &len, (char *) &tmp); ++ if (res) ++ return res; ++ kernel_len = tmp * master->erasesize; ++ ++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL); ++ ++ *pparts = rdc_flash_parts; ++ ++ rdc_flash_parts[0].name = "kernel"; ++ rdc_flash_parts[0].offset = 0; ++ rdc_flash_parts[0].size = kernel_len; ++ rdc_flash_parts[1].name = "rootfs"; ++ rdc_flash_parts[1].offset = kernel_len; ++ rdc_flash_parts[1].size = master->size - kernel_len - 0x10000; ++ rdc_flash_parts[2].name = "biffboot"; ++ rdc_flash_parts[2].offset = master->size - 0x10000; ++ rdc_flash_parts[2].size = 0x10000; ++ ++ return 3; ++} ++ ++struct mtd_part_parser __initdata bifferboard_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_bifferboard_partitions, ++ .name = "Bifferboard", ++}; ++ ++static int __init bifferboard_setup(void) ++{ ++ return register_mtd_parser(&bifferboard_parser); ++} ++arch_initcall(bifferboard_setup); +--- /dev/null ++++ b/arch/x86/mach-rdc321x/boards/r8610.c +@@ -0,0 +1,69 @@ ++/* ++ * R8610 RDC321x platform devices ++ * ++ * Copyright (C) 2009, Florian Fainelli ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++static int __init ++parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts, ++ struct mtd_part_parser_data *plat_data) ++{ ++ struct mtd_partition *rdc_flash_parts; ++ ++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL); ++ ++ *pparts = rdc_flash_parts; ++ ++ rdc_flash_parts[0].name = "kernel"; ++ rdc_flash_parts[0].size = 0x001f0000; ++ rdc_flash_parts[0].offset = 0; ++ rdc_flash_parts[1].name = "config"; ++ rdc_flash_parts[1].size = 0x10000; ++ rdc_flash_parts[1].offset = MTDPART_OFS_APPEND; ++ rdc_flash_parts[2].name = "rootfs"; ++ rdc_flash_parts[2].size = 0x1E0000; ++ rdc_flash_parts[2].offset = MTDPART_OFS_APPEND; ++ rdc_flash_parts[3].name = "redboot"; ++ rdc_flash_parts[3].size = 0x20000; ++ rdc_flash_parts[3].offset = MTDPART_OFS_APPEND; ++ rdc_flash_parts[3].mask_flags = MTD_WRITEABLE; ++ ++ return 4; ++} ++ ++struct mtd_part_parser __initdata r8610_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_r8610_partitions, ++ .name = "R8610", ++}; ++ ++static int __init r8610_setup(void) ++{ ++ return register_mtd_parser(&r8610_parser); ++} ++ ++arch_initcall(r8610_setup); +--- /dev/null ++++ b/arch/x86/mach-rdc321x/boards/sitecom.c +@@ -0,0 +1,115 @@ ++/* ++ * Sitecom RDC321x platform devices ++ * ++ * Copyright (C) 2007-2009 OpenWrt.org ++ * Copyright (C) 2007 Florian Fainelli ++ * Copyright (C) 2008-2009 Daniel Gimpelevich ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++struct image_header { ++ char magic[4]; ++ u32 kernel_length; ++ u32 ramdisk_length; ++ char magic2[4]; ++ u32 kernel_length2; ++}; ++ ++static struct gpio_led sitecom_leds[] = { ++ { .name = "rdc321x:power", .gpio = 15, .active_low = 1}, ++ { .name = "rdc321x:usb0", .gpio = 0, .active_low = 1}, ++ { .name = "rdc321x:usb1", .gpio = 1, .active_low = 1}, ++}; ++ ++static struct gpio_keys_button sitecom_btns[] = { ++ { ++ .gpio = 6, ++ .code = BTN_0, ++ .desc = "Reset", ++ .active_low = 1, ++ } ++}; ++ ++static int __init ++parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts, ++ struct mtd_part_parser_data *plat_data) ++{ ++ struct image_header header; ++ int res; ++ size_t len; ++ struct mtd_partition *rdc_flash_parts; ++ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data; ++ ++ if (master->size != 0x400000) /* 4MB */ ++ return -ENOSYS; ++ ++ res = mtd_read(master, 0x8000, sizeof(header), &len, (char *)&header); ++ if (res) ++ return res; ++ ++ if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4)) ++ return -ENOSYS; ++ ++ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL); ++ ++ rdc_flash_parts[0].name = "firmware"; ++ rdc_flash_parts[0].offset = 0x8000; ++ rdc_flash_parts[0].size = 0x3F0000 - 0x8000; ++ rdc_flash_parts[1].name = "config"; ++ rdc_flash_parts[1].offset = 0; ++ rdc_flash_parts[1].size = 0x8000; ++ rdc_flash_parts[2].name = "kernel"; ++ rdc_flash_parts[2].offset = 0x8014; ++ rdc_flash_parts[2].size = header.kernel_length; ++ rdc_flash_parts[3].name = "rootfs"; ++ rdc_flash_parts[3].offset = 0x8014 + header.kernel_length; ++ rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset; ++ rdc_flash_parts[4].name = "bootloader"; ++ rdc_flash_parts[4].offset = 0x3F0000; ++ rdc_flash_parts[4].size = 0x10000; ++ ++ *pparts = rdc_flash_parts; ++ ++ pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds); ++ pdata->led_data.leds = sitecom_leds; ++ pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns); ++ pdata->button_data.buttons = sitecom_btns; ++ ++ return 5; ++} ++ ++struct mtd_part_parser __initdata sitecom_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_sitecom_partitions, ++ .name = "Sitecom", ++}; ++ ++static int __init sitecom_setup(void) ++{ ++ return register_mtd_parser(&sitecom_parser); ++} ++ ++arch_initcall(sitecom_setup); +--- /dev/null ++++ b/arch/x86/mach-rdc321x/reboot.c +@@ -0,0 +1,44 @@ ++/* ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ */ ++ ++#include ++#include ++ ++static void rdc321x_reset(void) ++{ ++ unsigned i; ++ ++ /* write to southbridge config register 0x41 ++ enable pci reset on cpu reset, make internal port 0x92 writeable ++ and switch port 0x92 to internal */ ++ outl(0x80003840, 0xCF8); ++ i = inl(0xCFC); ++ i |= 0x1600; ++ outl(i, 0xCFC); ++ ++ /* soft reset */ ++ outb(1, 0x92); ++} ++ ++static int __init rdc_setup_reset(void) ++{ ++ machine_ops.emergency_restart = rdc321x_reset; ++ return 0; ++} ++ ++arch_initcall(rdc_setup_reset); +--- /dev/null ++++ b/arch/x86/include/asm/rdc_boards.h +@@ -0,0 +1,36 @@ ++/* ++ * RDC321x boards ++ * ++ * Copyright (C) 2007-2009 OpenWrt.org ++ * Copyright (C) 2007 Florian Fainelli ++ * Copyright (C) 2008-2009 Daniel Gimpelevich ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ */ ++ ++#ifndef _RDC_BOARDS_H__ ++#define _RDC_BOARDS_H__ ++ ++#include ++#include ++ ++struct rdc_platform_data { ++ struct gpio_led_platform_data led_data; ++ struct gpio_keys_platform_data button_data; ++}; ++ ++#endif diff --git a/trunk/target/linux/x86/patches-3.18/120-panic_on_unrecovered_nmi.patch b/trunk/target/linux/x86/patches-3.18/120-panic_on_unrecovered_nmi.patch new file mode 100644 index 00000000..0432686c --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/120-panic_on_unrecovered_nmi.patch @@ -0,0 +1,11 @@ +--- a/drivers/mfd/rdc321x-southbridge.c ++++ b/drivers/mfd/rdc321x-southbridge.c +@@ -85,6 +85,8 @@ static int rdc321x_sb_probe(struct pci_d + rdc321x_gpio_pdata.sb_pdev = pdev; + rdc321x_wdt_pdata.sb_pdev = pdev; + ++ panic_on_unrecovered_nmi = 1; ++ + return mfd_add_devices(&pdev->dev, -1, + rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), + NULL, 0, NULL); diff --git a/trunk/target/linux/x86/patches-3.18/150-pit-tick-rate.patch b/trunk/target/linux/x86/patches-3.18/150-pit-tick-rate.patch new file mode 100644 index 00000000..ea2da0ce --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/150-pit-tick-rate.patch @@ -0,0 +1,13 @@ +--- a/include/linux/timex.h ++++ b/include/linux/timex.h +@@ -158,6 +158,10 @@ int read_current_timer(unsigned long *ti + void ntp_notify_cmos_timer(void); + + /* The clock frequency of the i8253/i8254 PIT */ ++#ifdef CONFIG_X86_RDC321X ++#define PIT_TICK_RATE 1041816ul ++#else + #define PIT_TICK_RATE 1193182ul ++#endif + + #endif /* LINUX_TIMEX_H */ diff --git a/trunk/target/linux/x86/patches-3.18/160-kexec-fix.patch b/trunk/target/linux/x86/patches-3.18/160-kexec-fix.patch new file mode 100644 index 00000000..ea32494a --- /dev/null +++ b/trunk/target/linux/x86/patches-3.18/160-kexec-fix.patch @@ -0,0 +1,43 @@ +From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001 +From: root +Date: Sun, 6 Dec 2009 18:26:43 +0000 +Subject: [PATCH 03/14] kexec fix + +--- + arch/x86/kernel/relocate_kernel_32.S | 6 ++++++ + 1 files changed, 6 insertions(+), 0 deletions(-) + +--- a/arch/x86/kernel/relocate_kernel_32.S ++++ b/arch/x86/kernel/relocate_kernel_32.S +@@ -54,8 +54,10 @@ relocate_kernel: + movl %eax, CR0(%edi) + movl %cr3, %eax + movl %eax, CR3(%edi) ++#ifndef CONFIG_X86_RDC321X + movl %cr4, %eax + movl %eax, CR4(%edi) ++#endif + + /* read the arguments and say goodbye to the stack */ + movl 20+4(%esp), %ebx /* page_list */ +@@ -124,7 +126,9 @@ identity_mapped: + * Setting everything to zero seems safe. + */ + xorl %eax, %eax ++#ifndef CONFIG_X86_RDC321X + movl %eax, %cr4 ++#endif + + jmp 1f + 1: +@@ -195,8 +199,10 @@ identity_mapped: + ret + + virtual_mapped: ++#ifndef CONFIG_X86_RDC321X + movl CR4(%edi), %eax + movl %eax, %cr4 ++#endif + movl CR3(%edi), %eax + movl %eax, %cr3 + movl CR0(%edi), %eax diff --git a/trunk/target/linux/x86/rdc/base-files/etc/config/network b/trunk/target/linux/x86/rdc/base-files/etc/config/network new file mode 100644 index 00000000..69627f7c --- /dev/null +++ b/trunk/target/linux/x86/rdc/base-files/etc/config/network @@ -0,0 +1,26 @@ +# Copyright (C) 2009 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth1 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + option ip6assign 60 + +config interface wan + option ifname eth0 + option proto dhcp + +config interface wan6 + option ifname eth0 + option proto dhcpv6 + +config globals globals + option ula_prefix auto diff --git a/trunk/target/linux/x86/rdc/base-files/etc/diag.sh b/trunk/target/linux/x86/rdc/base-files/etc/diag.sh new file mode 100644 index 00000000..03796d77 --- /dev/null +++ b/trunk/target/linux/x86/rdc/base-files/etc/diag.sh @@ -0,0 +1,17 @@ +#!/bin/sh +# Copyright (C) 2007-2013 OpenWrt.org + +. /lib/functions/leds.sh + +status_led="rdc321x:dmz" + +set_state() { + case "$1" in + preinit) + status_led_on + ;; + done) + status_led_off + ;; + esac +} diff --git a/trunk/target/linux/x86/rdc/base-files/lib/preinit/05_set_ether_mac_rdc b/trunk/target/linux/x86/rdc/base-files/lib/preinit/05_set_ether_mac_rdc new file mode 100644 index 00000000..0518766a --- /dev/null +++ b/trunk/target/linux/x86/rdc/base-files/lib/preinit/05_set_ether_mac_rdc @@ -0,0 +1,36 @@ +#!/bin/sh +# Copyright (C) 2009-2012 OpenWrt.org + +. /lib/functions.sh + +r6040_module() { + insmod libphy + insmod swconfig + insmod ip17xx + sleep 1 + insmod r6040 +} + +set_ether_mac() { + kernel=$(grep firmware /proc/mtd | awk -F: '{print $1}') + [ -n "$kernel" ] && hdr=$(dd if=/dev/$kernel count=4 bs=1 2> /dev/null) + [ "$hdr" = "CSYS" ] && config=$(find_mtd_part config) + if [ -n "$config" ]; then + mac0=$(hexdump -n 6 -e '6/1 ":%X"' -s 24583 $config | cut -c2-) + [ "$mac0" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac0 + mac1=$(hexdump -n 6 -e '6/1 ":%X"' -s 24589 $config | cut -c2-) + [ "$mac1" = "FF:FF:FF:FF:FF:FF" -o "$mac1" = "0:0:0:0:0:0" ] && unset mac1 + fi + if [ -n "$mac0" ]; then + logger -t kernel -p user.info "r6040: Setting MAC for eth0 to $mac0" + ifconfig eth0 hw ether "$mac0" + fi + if [ -n "$mac1" ]; then + logger -t kernel -p user.info "r6040: Setting MAC for eth1 to $mac1" + ifconfig eth1 hw ether "$mac1" + fi +} + +boot_hook_add preinit_main r6040_module +boot_hook_add preinit_main set_ether_mac + diff --git a/trunk/target/linux/x86/rdc/base-files/lib/upgrade/platform.sh b/trunk/target/linux/x86/rdc/base-files/lib/upgrade/platform.sh new file mode 100644 index 00000000..6348a699 --- /dev/null +++ b/trunk/target/linux/x86/rdc/base-files/lib/upgrade/platform.sh @@ -0,0 +1,10 @@ +PART_NAME=firmware + +platform_check_image() { + [ "$(get_magic_word $(find_mtd_part firmware))" -eq "$(get_magic_word "$1")" ] && return 0 + + echo "Invalid image type. Please use an appropriate .bin file" + return 1 +} + +# use default for platform_do_upgrade() diff --git a/trunk/target/linux/x86/rdc/config-default b/trunk/target/linux/x86/rdc/config-default new file mode 100644 index 00000000..34007acb --- /dev/null +++ b/trunk/target/linux/x86/rdc/config-default @@ -0,0 +1,65 @@ +CONFIG_ARCH_RANDOM=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARPD is not set +# CONFIG_BASE_FULL is not set +CONFIG_BASE_SMALL=1 +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BRIDGE=m +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CMDLINE="console=uart,io,0x3f8 rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_COMPAT_VDSO is not set +# CONFIG_CPU_SUP_AMD is not set +# CONFIG_CPU_SUP_CENTAUR is not set +# CONFIG_CPU_SUP_CYRIX_32 is not set +# CONFIG_CPU_SUP_INTEL is not set +# CONFIG_CPU_SUP_TRANSMETA_32 is not set +# CONFIG_CPU_SUP_UMC_32 is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_FIRMWARE_MEMMAP is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_RDC321X=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HPET_TIMER is not set +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_IP_MROUTE is not set +CONFIG_IRQ_DOMAIN=y +# CONFIG_JFFS2_SUMMARY is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LLC=m +CONFIG_MFD_CORE=y +CONFIG_MFD_RDC321X=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MTRR is not set +CONFIG_NLS=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +# CONFIG_PCI_QUIRKS is not set +CONFIG_PHYSICAL_START=0x100000 +CONFIG_PROCESSOR_SELECT=y +CONFIG_RDC321X_WDT=m +# CONFIG_SCx200 is not set +# CONFIG_SHMEM is not set +CONFIG_STP=m +CONFIG_VLAN_8021Q=m +# CONFIG_VM86 is not set +CONFIG_X86_EXTENDED_PLATFORM=y +# CONFIG_X86_GENERIC is not set +CONFIG_X86_INTERNODE_CACHE_SHIFT=4 +CONFIG_X86_L1_CACHE_SHIFT=4 +# CONFIG_X86_MCE is not set +# CONFIG_X86_PLATFORM_DEVICES is not set +# CONFIG_X86_PPRO_FENCE is not set +CONFIG_X86_RDC321X=y +CONFIG_X86_REBOOTFIXUPS=y +# CONFIG_X86_UP_APIC is not set +# CONFIG_X86_VERBOSE_BOOTUP is not set +# CONFIG_X86_WANT_INTEL_MID is not set diff --git a/trunk/target/linux/x86/rdc/profiles/ar525w.mk b/trunk/target/linux/x86/rdc/profiles/ar525w.mk new file mode 100644 index 00000000..d38cb1f2 --- /dev/null +++ b/trunk/target/linux/x86/rdc/profiles/ar525w.mk @@ -0,0 +1,12 @@ +# +# Copyright (C) 2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/ar525w + NAME:=Airlink AR525W + PACKAGES:=kmod-rt61-pci kmod-switch-ip17xx swconfig +endef +$(eval $(call Profile,ar525w)) diff --git a/trunk/target/linux/x86/rdc/profiles/bifferboard.mk b/trunk/target/linux/x86/rdc/profiles/bifferboard.mk new file mode 100644 index 00000000..35fea452 --- /dev/null +++ b/trunk/target/linux/x86/rdc/profiles/bifferboard.mk @@ -0,0 +1,13 @@ +# +# Copyright (C) 2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/bifferboard + NAME:=Bifferboard + PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \ + kmod-usb-storage kmod-scsi-core kmod-fs-ext4 +endef +$(eval $(call Profile,bifferboard)) diff --git a/trunk/target/linux/x86/rdc/profiles/r8610.mk b/trunk/target/linux/x86/rdc/profiles/r8610.mk new file mode 100644 index 00000000..d5f8c0a8 --- /dev/null +++ b/trunk/target/linux/x86/rdc/profiles/r8610.mk @@ -0,0 +1,14 @@ +# +# Copyright (C) 2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/r8610 + NAME:=RDC R8610 Evaluation Board + PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \ + kmod-hwmon-core kmod-hwmon-w83627hf kmod-ide-core kmod-ide-it821x \ + kmod-rtc-core kmod-rtc-m48t86 kmod-fs-ext4 +endef +$(eval $(call Profile,r8610)) diff --git a/trunk/target/linux/x86/rdc/profiles/sitecom.mk b/trunk/target/linux/x86/rdc/profiles/sitecom.mk new file mode 100644 index 00000000..e3b2981e --- /dev/null +++ b/trunk/target/linux/x86/rdc/profiles/sitecom.mk @@ -0,0 +1,12 @@ +# +# Copyright (C) 2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/sitecom + NAME:=Devices from Sitecom (WL-153, DC-230) + PACKAGES:=kmod-rt61-pci kmod-usb-core kmod-usb-ohci kmod-usb2 +endef +$(eval $(call Profile,sitecom)) diff --git a/trunk/target/linux/x86/rdc/target.mk b/trunk/target/linux/x86/rdc/target.mk new file mode 100644 index 00000000..9b03b15b --- /dev/null +++ b/trunk/target/linux/x86/rdc/target.mk @@ -0,0 +1,13 @@ +BOARDNAME:=RDC R-321x +FEATURES:=squashfs pci usb gpio pcmcia +MAINTAINER:=Florian Fainelli +FEATURES += broken + +DEFAULT_PACKAGES += kmod-llc kmod-stp kmod-bridge kmod-8021q \ + wpad-mini kmod-libphy kmod-r6040 kmod-input-core \ + kmod-input-polldev kmod-button-hotplug kmod-rdc321x-wdt + +define Target/Description + Build firmware images for RDC321x based routers + (e.g. Airlink101 AR525W, Linksys WRT54GR, Sitecom WL-153) +endef diff --git a/trunk/target/linux/x86/xen_domu/base-files/etc/inittab b/trunk/target/linux/x86/xen_domu/base-files/etc/inittab new file mode 100644 index 00000000..469b8a9a --- /dev/null +++ b/trunk/target/linux/x86/xen_domu/base-files/etc/inittab @@ -0,0 +1,5 @@ +::sysinit:/etc/init.d/rcS S boot +::shutdown:/etc/init.d/rcS K stop +tts/0::askfirst:/bin/ash --login +hvc0::askfirst:/bin/ash --login +tty1::askfirst:/bin/ash --login diff --git a/trunk/target/linux/x86/xen_domu/base-files/lib/preinit/45_mount_xenfs b/trunk/target/linux/x86/xen_domu/base-files/lib/preinit/45_mount_xenfs new file mode 100644 index 00000000..7b076051 --- /dev/null +++ b/trunk/target/linux/x86/xen_domu/base-files/lib/preinit/45_mount_xenfs @@ -0,0 +1,11 @@ +#!/bin/sh +# Copyright (C) 2010 OpenWrt.org + +do_mount_xenfs() { + [ -f /etc/modules.d/??-xenfs ] && { + insmod $(cat /etc/modules.d/??-xenfs) + mount -o noatime none /proc/xen -t xenfs + } +} + +boot_hook_add preinit_mount_root do_mount_xenfs diff --git a/trunk/target/linux/x86/xen_domu/config-default b/trunk/target/linux/x86/xen_domu/config-default new file mode 100644 index 00000000..f2c8ba84 --- /dev/null +++ b/trunk/target/linux/x86/xen_domu/config-default @@ -0,0 +1,86 @@ +# CONFIG_APM is not set +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set +CONFIG_CPU_RMAP=y +# CONFIG_DEBUG_HOTPLUG_CPU0 is not set +CONFIG_FREEZER=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_HIBERNATE_CALLBACKS=y +# CONFIG_HIGHMEM64G is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_IOMMU_HELPER=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_XZ is not set +# CONFIG_LGUEST_GUEST is not set +# CONFIG_M486 is not set +CONFIG_MMU_NOTIFIER=y +CONFIG_MPENTIUM4=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NR_CPUS=4 +CONFIG_PARAVIRT=y +CONFIG_PARAVIRT_CLOCK=y +# CONFIG_PARAVIRT_DEBUG is not set +CONFIG_PARAVIRT_SPINLOCKS=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_PCI_XEN=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_SCHED_MC=y +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SMP=y +CONFIG_STOP_MACHINE=y +CONFIG_SWIOTLB=y +CONFIG_SWIOTLB_XEN=y +CONFIG_SYS_HYPERVISOR=y +CONFIG_TREE_RCU=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +# CONFIG_VMWARE_BALLOON is not set +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_X86_32_SMP=y +# CONFIG_X86_BIGSMP is not set +CONFIG_X86_CMOV=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_X86_HT=y +CONFIG_X86_INTERNODE_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_MINIMUM_CPU_FAMILY=5 +CONFIG_X86_PAE=y +CONFIG_X86_TSC=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_XEN=y +# CONFIG_XENFS is not set +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BLKDEV_FRONTEND=y +CONFIG_XEN_DEBUG_FS=y +# CONFIG_XEN_DEV_EVTCHN is not set +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_XEN_HAVE_PVMMU=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=64 +# CONFIG_XEN_NETDEV_FRONTEND is not set +# CONFIG_XEN_PCIDEV_FRONTEND is not set +CONFIG_XEN_PRIVCMD=m +# CONFIG_XEN_PRIVILEGED_GUEST is not set +CONFIG_XEN_PVHVM=y +CONFIG_XEN_SAVE_RESTORE=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_SCSI_FRONTEND=y +CONFIG_XEN_SYS_HYPERVISOR=y +# CONFIG_XEN_WDT is not set +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XPS=y diff --git a/trunk/target/linux/x86/xen_domu/target.mk b/trunk/target/linux/x86/xen_domu/target.mk new file mode 100644 index 00000000..80bac3b8 --- /dev/null +++ b/trunk/target/linux/x86/xen_domu/target.mk @@ -0,0 +1,3 @@ +BOARDNAME:=Xen Paravirt Guest +DEFAULT_PACKAGES += kmod-xen-fs kmod-xen-evtchn kmod-xen-netdev kmod-xen-kbddev +FEATURES:=display