From: Vitaly Kuzmichev Date: Fri, 13 Aug 2010 12:57:51 +0000 (+0400) Subject: USB-CDC: Use native debug printout macros X-Git-Tag: v2010.12-rc1~174^2~27^2^2~8 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=7de731859158144cf2abf1de4e79327c8a44baf8;p=oweals%2Fu-boot.git USB-CDC: Use native debug printout macros Replace Linux-like debug printout macros by native ones. Signed-off-by: Vitaly Kuzmichev Applied after removing dead code like '#define DEBUG/#undef DEBUG' --- diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index a07738f80e..5b2f6dd007 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -31,14 +31,7 @@ #include "gadget_chips.h" #define USB_NET_NAME "usb0" -#define dprintf(x, ...) -#undef INFO -#define INFO(x, s...) printf(s) -#define dev_err(x, stuff...) printf(stuff) -#define dev_dbg dev_err -#define dev_warn dev_err -#define DEBUG dev_err -#define VDEBUG DEBUG + #define atomic_read extern struct platform_data brd; #define spin_lock(x) @@ -769,7 +762,7 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) result = usb_ep_enable (dev->status_ep, dev->status); if (result != 0) { - printf ("enable %s --> %d\n", + debug("enable %s --> %d\n", dev->status_ep->name, result); goto done; } @@ -789,14 +782,14 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) if (!cdc_active(dev)) { result = usb_ep_enable (dev->in_ep, dev->in); if (result != 0) { - printf ("enable %s --> %d\n", + debug("enable %s --> %d\n", dev->in_ep->name, result); goto done; } result = usb_ep_enable (dev->out_ep, dev->out); if (result != 0) { - printf ("enable %s --> %d\n", + debug("enable %s --> %d\n", dev->out_ep->name, result); goto done; } @@ -827,6 +820,8 @@ static void eth_reset_config (struct eth_dev *dev) if (dev->config == 0) return; + debug("%s\n", __func__); + /* disable endpoints, forcing (synchronous) completion of * pending i/o. then free the requests. */ @@ -864,7 +859,7 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags && dev->config && dev->tx_qlen != 0) { /* tx fifo is full, but we can't clear it...*/ - INFO (dev, "can't change configurations\n"); + error("can't change configurations"); return -ESPIPE; } eth_reset_config (dev); @@ -901,7 +896,7 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags } dev->config = number; - INFO (dev, "%s speed config #%d: %d mA, %s, using %s\n", + printf("%s speed config #%d: %d mA, %s, using %s\n", speed, number, power, driver_desc, (cdc_active(dev)? "CDC Ethernet" : "CDC Ethernet Subset")); @@ -941,11 +936,11 @@ static void eth_status_complete (struct usb_ep *ep, struct usb_request *req) req->length = STATUS_BYTECOUNT; value = usb_ep_queue (ep, req, GFP_ATOMIC); - dprintf ("send SPEED_CHANGE --> %d\n", value); + debug("send SPEED_CHANGE --> %d\n", value); if (value == 0) return; } else if (value != -ECONNRESET) { - dprintf("event %02x --> %d\n", + debug("event %02x --> %d\n", event->bNotificationType, value); if (event->bNotificationType== USB_CDC_NOTIFY_SPEED_CHANGE) @@ -991,7 +986,7 @@ static void issue_start_status (struct eth_dev *dev) value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC); if (value < 0) - printf ("status buf queue --> %d\n", value); + debug("status buf queue --> %d\n", value); } #endif @@ -1001,8 +996,7 @@ static void issue_start_status (struct eth_dev *dev) static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req) { if (req->status || req->actual != req->length) - dprintf (/*(struct eth_dev *) ep->driver_data*/ - "setup complete --> %d, %d/%d\n", + debug("setup complete --> %d, %d/%d\n", req->status, req->actual, req->length); } @@ -1029,7 +1023,7 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) * while config change events may enable network traffic. */ - dprintf("eth_setup:...\n"); + debug("%s\n", __func__); req->complete = eth_setup_complete; switch (ctrl->bRequest) { @@ -1078,9 +1072,9 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (ctrl->bRequestType != 0) break; if (gadget->a_hnp_support) - DEBUG (dev, "HNP available\n"); + debug("HNP available\n"); else if (gadget->a_alt_hnp_support) - DEBUG (dev, "HNP needs a different root port\n"); + debug("HNP needs a different root port\n"); value = eth_set_config (dev, wValue, GFP_ATOMIC); break; case USB_REQ_GET_CONFIGURATION: @@ -1145,7 +1139,7 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) /* FIXME this is wrong, as is the assumption that * all non-PXA hardware talks real CDC ... */ - dev_warn (&gadget->dev, "set_interface ignored!\n"); + debug("set_interface ignored!\n"); #endif /* DEV_CONFIG_CDC */ done_set_intf: @@ -1179,7 +1173,7 @@ done_set_intf: || wLength != 0 || wIndex > 1) break; - printf ("packet filter %02x\n", wValue); + debug("packet filter %02x\n", wValue); dev->cdc_filter = wValue; value = 0; break; @@ -1194,21 +1188,20 @@ done_set_intf: #endif /* DEV_CONFIG_CDC */ default: - printf ( - "unknown control req%02x.%02x v%04x i%04x l%d\n", + debug("unknown control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); } /* respond with data transfer before status phase? */ if (value >= 0) { - dprintf("respond with data transfer before status phase\n"); + debug("respond with data transfer before status phase\n"); req->length = value; req->zero = value < wLength && (value % gadget->ep0->maxpacket) == 0; value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); if (value < 0) { - DEBUG (dev, "ep_queue --> %d\n", value); + debug("ep_queue --> %d\n", value); req->status = 0; eth_setup_complete (gadget->ep0, req); } @@ -1237,7 +1230,7 @@ static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \ * byte off the end (to force hardware errors on overflow). */ - dprintf("%s\n", __func__); + debug("%s\n", __func__); size = (ETHER_HDR_SIZE + dev->mtu + RX_EXTRA); size += dev->out_ep->maxpacket - 1; @@ -1255,7 +1248,7 @@ static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \ retval = usb_ep_queue (dev->out_ep, req, gfp_flags); if (retval) { - dprintf ("rx submit --> %d\n", retval); + error("rx submit --> %d", retval); } return retval; } @@ -1265,8 +1258,7 @@ static void rx_complete (struct usb_ep *ep, struct usb_request *req) { struct eth_dev *dev = ep->driver_data; - dprintf("%s\n", __func__); - dprintf("rx status %d\n", req->status); + debug("%s: status %d\n", __func__, req->status); packet_received=1; @@ -1291,14 +1283,14 @@ static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags) return 0; fail: - DEBUG (dev, "can't alloc requests\n"); + error("can't alloc requests"); return -1; } static void tx_complete (struct usb_ep *ep, struct usb_request *req) { - dprintf("%s, status: %s\n", __func__,(req->status) ? "failed":"ok"); + debug("%s: status %s\n", __func__, (req->status)?"failed":"ok"); packet_sent=1; } @@ -1427,7 +1419,7 @@ static void eth_unbind (struct usb_gadget *gadget) { struct eth_dev *dev = get_gadget_data (gadget); - printf("eth_unbind:...\n"); + debug("%s...\n", __func__); if (dev->stat_req) { usb_ep_free_request (dev->status_ep, dev->stat_req); @@ -1567,8 +1559,7 @@ static int eth_bind(struct usb_gadget *gadget) * anything less functional on CDC-capable hardware, * so we fail in this case. */ - dev_err (&gadget->dev, - "controller '%s' not recognized\n", + error("controller '%s' not recognized", gadget->name); return -ENODEV; } @@ -1605,8 +1596,7 @@ static int eth_bind(struct usb_gadget *gadget) in_ep = usb_ep_autoconfig (gadget, &fs_source_desc); if (!in_ep) { autoconf_fail: - dev_err (&gadget->dev, - "can't autoconfigure on %s\n", + error("can't autoconfigure on %s\n", gadget->name); return -ENODEV; } @@ -1700,18 +1690,18 @@ autoconf_fail: dev->host_mac [2], dev->host_mac [3], dev->host_mac [4], dev->host_mac [5]); - INFO (dev, "using %s, OUT %s IN %s%s%s\n", gadget->name, + printf("using %s, OUT %s IN %s%s%s\n", gadget->name, out_ep->name, in_ep->name, status_ep ? " STATUS " : "", status_ep ? status_ep->name : "" ); - INFO (dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + printf("MAC %02x:%02x:%02x:%02x:%02x:%02x\n", dev->net->enetaddr [0], dev->net->enetaddr [1], dev->net->enetaddr [2], dev->net->enetaddr [3], dev->net->enetaddr [4], dev->net->enetaddr [5]); if (cdc) { - INFO (dev, "HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + printf("HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n", dev->host_mac [0], dev->host_mac [1], dev->host_mac [2], dev->host_mac [3], dev->host_mac [4], dev->host_mac [5]); @@ -1755,7 +1745,7 @@ autoconf_fail: return 0; fail: - dev_dbg(&gadget->dev, "register_netdev failed\n"); + error("%s failed", __func__); eth_unbind (gadget); return -ENOMEM; } @@ -1768,7 +1758,7 @@ static int usb_eth_init(struct eth_device* netdev, bd_t* bd) unsigned long timeout = USB_CONNECT_TIMEOUT; if (!netdev) { - printf("ERROR: received NULL ptr\n"); + error("received NULL ptr"); goto fail; } @@ -1790,7 +1780,7 @@ static int usb_eth_init(struct eth_device* netdev, bd_t* bd) { /* Handle control-c and timeouts */ if (ctrlc() || (get_timer(ts) > timeout)) { - printf("The remote end did not respond in time.\n"); + error("The remote end did not respond in time."); goto fail; } usb_gadget_handle_interrupts(); @@ -1806,9 +1796,9 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le { int retval; struct usb_request *req = NULL; + struct eth_dev *dev = &l_ethdev; - struct eth_dev *dev = &l_ethdev; - dprintf("%s:...\n",__func__); + debug("%s:...\n", __func__); req = dev->tx_req; @@ -1836,7 +1826,7 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); if (!retval) - dprintf("%s: packet queued\n",__func__); + debug("%s: packet queued\n", __func__); while(!packet_sent) { packet_sent=0; @@ -1853,7 +1843,7 @@ static int usb_eth_recv(struct eth_device* netdev) if (packet_received) { - dprintf("%s: packet received \n",__func__); + debug("%s: packet received \n", __func__); if (dev->rx_req) { NetReceive(NetRxPackets[0],dev->rx_req->length); @@ -1862,7 +1852,7 @@ static int usb_eth_recv(struct eth_device* netdev) if (dev->rx_req) rx_submit (dev, dev->rx_req, 0); } - else printf("dev->rx_req invalid\n"); + else error("dev->rx_req invalid"); } return 0; } @@ -1873,7 +1863,7 @@ void usb_eth_halt(struct eth_device* netdev) if (!netdev) { - printf("ERROR: received NULL ptr\n"); + error("received NULL ptr"); return; } @@ -1929,11 +1919,11 @@ int usb_eth_initialize(bd_t *bi) host_addr[sizeof(host_addr)-1] = '\0'; if (!is_eth_addr_valid(dev_addr)) { - printf("ERROR: Need valid 'usbnet_devaddr' to be set\n"); + error("Need valid 'usbnet_devaddr' to be set"); status = -1; } if (!is_eth_addr_valid(host_addr)) { - printf("ERROR: Need valid 'usbnet_hostaddr' to be set\n"); + error("Need valid 'usbnet_hostaddr' to be set"); status = -1; } if (status) @@ -1947,7 +1937,7 @@ int usb_eth_initialize(bd_t *bi) return 0; fail: - printf("%s failed\n", __func__ ); + error("%s failed. error = %d", __func__, status); return status; }