From: Julius Werner Date: Thu, 28 Feb 2013 18:08:40 +0000 (+0000) Subject: usb: Add new command to set USB 2.0 port test modes X-Git-Tag: v2013.07-rc1~1^2~82 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=7d9aa8fd87171164a6f14167a0c9c066f4312b8d;p=oweals%2Fu-boot.git usb: Add new command to set USB 2.0 port test modes This patch adds a new 'usb test' command, that will set a port to a USB 2.0 test mode (see USB 2.0 spec 7.1.20). It supports all five test modes on both downstream hub ports and ordinary device's upstream ports. In addition, it supports EHCI root hub ports. Signed-off-by: Julius Werner --- diff --git a/common/cmd_usb.c b/common/cmd_usb.c index dacdc2d5b1..adc5f02a2c 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -269,6 +269,22 @@ static void usb_display_config(struct usb_device *dev) printf("\n"); } +static struct usb_device *usb_find_device(int devnum) +{ + struct usb_device *dev; + int d; + + for (d = 0; d < USB_MAX_DEVICE; d++) { + dev = usb_get_dev_index(d); + if (dev == NULL) + return NULL; + if (dev->devnum == devnum) + return dev; + } + + return NULL; +} + static inline char *portspeed(int speed) { if (speed == USB_SPEED_HIGH) @@ -348,6 +364,66 @@ static void usb_show_tree(struct usb_device *dev) usb_show_tree_graph(dev, &preamble[0]); } +static int usb_test(struct usb_device *dev, int port, char* arg) +{ + int mode; + + if (port > dev->maxchild) { + printf("Device is no hub or does not have %d ports.\n", port); + return 1; + } + + switch (arg[0]) { + case 'J': + case 'j': + printf("Setting Test_J mode"); + mode = USB_TEST_MODE_J; + break; + case 'K': + case 'k': + printf("Setting Test_K mode"); + mode = USB_TEST_MODE_K; + break; + case 'S': + case 's': + printf("Setting Test_SE0_NAK mode"); + mode = USB_TEST_MODE_SE0_NAK; + break; + case 'P': + case 'p': + printf("Setting Test_Packet mode"); + mode = USB_TEST_MODE_PACKET; + break; + case 'F': + case 'f': + printf("Setting Test_Force_Enable mode"); + mode = USB_TEST_MODE_FORCE_ENABLE; + break; + default: + printf("Unrecognized test mode: %s\nAvailable modes: " + "J, K, S[E0_NAK], P[acket], F[orce_Enable]\n", arg); + return 1; + } + + if (port) + printf(" on downstream facing port %d...\n", port); + else + printf(" on upstream facing port...\n"); + + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_FEATURE, + port ? USB_RT_PORT : USB_RECIP_DEVICE, + port ? USB_PORT_FEAT_TEST : USB_FEAT_TEST, + (mode << 8) | port, + NULL, 0, USB_CNTL_TIMEOUT) == -1) { + printf("Error during SET_FEATURE.\n"); + return 1; + } else { + printf("Test mode successfully set. Use 'usb start' " + "to return to normal operation.\n"); + return 0; + } +} + /****************************************************************************** * usb boot command intepreter. Derived from diskboot @@ -441,17 +517,9 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } else { - int d; - - i = simple_strtoul(argv[2], NULL, 16); + i = simple_strtoul(argv[2], NULL, 10); printf("config for device %d\n", i); - for (d = 0; d < USB_MAX_DEVICE; d++) { - dev = usb_get_dev_index(d); - if (dev == NULL) - break; - if (dev->devnum == i) - break; - } + dev = usb_find_device(i); if (dev == NULL) { printf("*** No device available ***\n"); return 0; @@ -462,6 +530,18 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } + if (strncmp(argv[1], "test", 4) == 0) { + if (argc < 5) + return CMD_RET_USAGE; + i = simple_strtoul(argv[2], NULL, 10); + dev = usb_find_device(i); + if (dev == NULL) { + printf("Device %d does not exist.\n", i); + return 1; + } + i = simple_strtoul(argv[3], NULL, 10); + return usb_test(dev, i, argv[4]); + } #ifdef CONFIG_USB_STORAGE if (strncmp(argv[1], "stor", 4) == 0) return usb_stor_info(); @@ -571,7 +651,6 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; } -#ifdef CONFIG_USB_STORAGE U_BOOT_CMD( usb, 5, 1, do_usb, "USB sub-system", @@ -580,30 +659,26 @@ U_BOOT_CMD( "usb stop [f] - stop USB [f]=force stop\n" "usb tree - show USB device tree\n" "usb info [dev] - show available USB devices\n" + "usb test [dev] [port] [mode] - set USB 2.0 test mode\n" + " (specify port 0 to indicate the device's upstream port)\n" + " Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]\n" +#ifdef CONFIG_USB_STORAGE "usb storage - show details of USB storage devices\n" "usb dev [dev] - show or set current USB storage device\n" "usb part [dev] - print partition table of one or all USB storage" - " devices\n" + " devices\n" "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" " to memory address `addr'\n" "usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n" " from memory address `addr'" +#endif /* CONFIG_USB_STORAGE */ ); +#ifdef CONFIG_USB_STORAGE U_BOOT_CMD( usbboot, 3, 1, do_usbboot, "boot from USB device", "loadAddr dev:part" ); - -#else -U_BOOT_CMD( - usb, 5, 1, do_usb, - "USB sub-system", - "start - start (scan) USB controller\n" - "usb reset - reset (rescan) USB controller\n" - "usb tree - show USB device tree\n" - "usb info [dev] - show available USB devices" -); -#endif +#endif /* CONFIG_USB_STORAGE */ diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6a55cd244c..19d4352024 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -623,15 +623,14 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, int len, srclen; uint32_t reg; uint32_t *status_reg; + int port = le16_to_cpu(req->index) & 0xff; struct ehci_ctrl *ctrl = dev->controller; - if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { - printf("The request port(%d) is not configured\n", - le16_to_cpu(req->index) - 1); + if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { + printf("The request port(%d) is not configured\n", port - 1); return -1; } - status_reg = (uint32_t *)&ctrl->hcor->or_portsc[ - le16_to_cpu(req->index) - 1]; + status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1]; srclen = 0; debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", @@ -748,7 +747,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; if (reg & EHCI_PS_OCC) tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; - if (ctrl->portreset & (1 << le16_to_cpu(req->index))) + if (ctrl->portreset & (1 << port)) tmpbuf[2] |= USB_PORT_STAT_C_RESET; srcptr = tmpbuf; @@ -774,7 +773,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, EHCI_PS_IS_LOWSPEED(reg)) { /* Low speed device, give up ownership. */ debug("port %d low speed --> companion\n", - req->index - 1); + port - 1); reg |= EHCI_PS_PO; ehci_writel(status_reg, reg); break; @@ -800,13 +799,17 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, ret = handshake(status_reg, EHCI_PS_PR, 0, 2 * 1000); if (!ret) - ctrl->portreset |= - 1 << le16_to_cpu(req->index); + ctrl->portreset |= 1 << port; else printf("port(%d) reset error\n", - le16_to_cpu(req->index) - 1); + port - 1); } break; + case USB_PORT_FEAT_TEST: + reg &= ~(0xf << 16); + reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16; + ehci_writel(status_reg, reg); + break; default: debug("unknown feature %x\n", le16_to_cpu(req->value)); goto unknown; @@ -833,7 +836,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC; break; case USB_PORT_FEAT_C_RESET: - ctrl->portreset &= ~(1 << le16_to_cpu(req->index)); + ctrl->portreset &= ~(1 << port); break; default: debug("unknown feature %x\n", le16_to_cpu(req->value)); diff --git a/include/usb_defs.h b/include/usb_defs.h index 9502544b21..5c5478f7cf 100644 --- a/include/usb_defs.h +++ b/include/usb_defs.h @@ -150,6 +150,18 @@ #define USB_REQ_SET_IDLE 0x0A #define USB_REQ_SET_PROTOCOL 0x0B +/* Device features */ +#define USB_FEAT_HALT 0x00 +#define USB_FEAT_WAKEUP 0x01 +#define USB_FEAT_TEST 0x02 + +/* Test modes */ +#define USB_TEST_MODE_J 0x01 +#define USB_TEST_MODE_K 0x02 +#define USB_TEST_MODE_SE0_NAK 0x03 +#define USB_TEST_MODE_PACKET 0x04 +#define USB_TEST_MODE_FORCE_ENABLE 0x05 + /* "pipe" definitions */ @@ -208,6 +220,7 @@ #define USB_PORT_FEAT_C_SUSPEND 18 #define USB_PORT_FEAT_C_OVER_CURRENT 19 #define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 /* wPortStatus bits */ #define USB_PORT_STAT_CONNECTION 0x0001