From: Gabor Juhos Date: Fri, 23 Dec 2011 14:27:16 +0000 (+0000) Subject: ramips: initial support for Sitecom WL-351 v1 002 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=7b1e525b56743a96c52cb25a6a12cbe7f5d58995;p=librecmc%2Flibrecmc.git ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with timed out. Signed-off-by: Tobias Diedrich SVN-Revision: 29604 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index a150cc26d8..edb8376cdd 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -66,6 +66,9 @@ get_status_led() { whr-g300n) status_led="whr-g300n:green:router" ;; + wl-351) + status_led="wl-351:amber:power" + ;; esac } diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index fa6607fd7f..a1d4887ecb 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -59,6 +59,7 @@ case "$FIRMWARE" in v22rw-2x2 | \ wcr-150gn | \ whr-g300n | \ + wl-351 | \ wr512-3gn) rt2x00_eeprom_extract "factory" 0 272 ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index bb1d90ef48..60dd716080 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -23,6 +23,13 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ;; + wl-351) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "rtl8366rb" "1" "1" + ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t" + ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t" + ;; + rt-n15) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "rtl8366s" "1" "1" @@ -56,7 +63,8 @@ ramips_setup_macs() argus-atp52b | \ b2c | \ nw718 | \ - rt-n15) + rt-n15 | \ + wl-351) lan_mac=$(ramips_get_mac_binary factory 4) wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index faed42162c..4dc10aeb22 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -104,6 +104,9 @@ ramips_board_name() { *"WHR-G300N") name="whr-g300n" ;; + *"Sitecom WL-351 v1 002") + name="wl-351" + ;; *"WZR-AGL300NH") name="wzr-agl300nh" ;; diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 4076d6c500..712976082b 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -38,5 +38,6 @@ enum ramips_mach_type { RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ + RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */ RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/ }; diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h index 97ee375eb7..9634322d14 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h @@ -13,6 +13,7 @@ enum { RT305X_ESW_VLAN_CONFIG_NONE = 0, + RT305X_ESW_VLAN_CONFIG_BYPASS, RT305X_ESW_VLAN_CONFIG_LLLLW, RT305X_ESW_VLAN_CONFIG_WLLLL, }; @@ -20,6 +21,8 @@ enum { struct rt305x_esw_platform_data { u8 vlan_config; + u32 reg_initval_fct2; + u32 reg_initval_fpa2; }; #endif /* _RT305X_ESW_PLATFORM_H */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 3e58242161..3149af4c88 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -76,6 +76,11 @@ config RT305X_MACH_V22RW_2X2 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_WL351 + bool "Sitecom WL-351 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_WCR150GN bool "Sparklan WCR-150GN support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 5da73155f9..2778f54f05 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -28,4 +28,4 @@ obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o - +obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c index 5dfbddbf2b..615f32dacc 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c @@ -24,6 +24,7 @@ #include "devices.h" #include +#include static struct resource rt305x_flash0_resources[] = { { @@ -142,7 +143,12 @@ static struct resource rt305x_esw_resources[] = { }, }; -struct rt305x_esw_platform_data rt305x_esw_data; +struct rt305x_esw_platform_data rt305x_esw_data = { + .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE, + .reg_initval_fct2 = 0x00d6500c, + .reg_initval_fpa2 = 0x3f502b28, +}; + static struct platform_device rt305x_esw_device = { .name = "rt305x-esw", .resource = rt305x_esw_resources, diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c new file mode 100644 index 0000000000..3ebc7fee8b --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c @@ -0,0 +1,156 @@ +/* + * Sitecom WL-351 v1 002 board support + * + * Copyright (C) 2011 Tobias Diedrich + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include "devices.h" + +#define WL351_GPIO_LED_POWER_AMBER 8 +#define WL351_GPIO_LED_UNPOPULATED_AMBER 12 +#define WL351_GPIO_LED_UNPOPULATED_BLUE 13 + +#define WL351_GPIO_BUTTON_RESET 10 +#define WL351_GPIO_BUTTON_WPS 0 + +#define WL351_BUTTONS_POLL_INTERVAL 20 + + +static struct gpio_led wl351_leds_gpio[] __initdata = { + { + .name = "wl-351:amber:power", + .gpio = WL351_GPIO_LED_POWER_AMBER, + .active_low = 1, + }, { + .name = "wl-351:amber:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_AMBER, + .active_low = 1, + }, { + .name = "wl-351:blue:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_BLUE, + .active_low = 1, + } +}; + + +static struct gpio_button wl351_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = WL351_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = WL351_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wl351_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x110000, + }, { + .name = "rootfs", + .offset = 0x160000, + .size = 0x230000, + }, { + .name = "user (jffs2)", + .offset = 0x3F0000, + .size = 0x010000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x3a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data wl351_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(wl351_partitions), + .parts = wl351_partitions, +#endif +}; + + +static struct rtl8366_platform_data wl351_switch_data = { + .gpio_sda = RT305X_GPIO_I2C_SD, + .gpio_sck = RT305X_GPIO_I2C_SCLK, +}; + +static struct platform_device wl351_switch = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wl351_switch_data, + } +}; + +static void __init wl351_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_MDIO); + rt305x_register_flash(0, &wl351_flash_data); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio), + wl351_leds_gpio); + ramips_register_gpio_buttons(-1, WL351_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(wl351_gpio_buttons), + wl351_gpio_buttons); + // external rtl8366rb + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS; + rt305x_esw_data.reg_initval_fct2 = 0x0002500c; + rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff; + rt305x_register_ethernet(); + platform_device_register(&wl351_switch); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002", + wl351_init); diff --git a/target/linux/ramips/files/drivers/net/ramips_esw.c b/target/linux/ramips/files/drivers/net/ramips_esw.c index 027284b084..a2fa579d8b 100644 --- a/target/linux/ramips/files/drivers/net/ramips_esw.c +++ b/target/linux/ramips/files/drivers/net/ramips_esw.c @@ -218,7 +218,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw) (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC3_UNTAG_EN_S)), RT305X_ESW_REG_POC3); - rt305x_esw_wr(esw, 0x00d6500c, RT305X_ESW_REG_FCT2); + rt305x_esw_wr(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2); rt305x_esw_wr(esw, 0x0008a301, RT305X_ESW_REG_SGC); /* Setup SoC Port control register */ @@ -229,7 +229,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw) (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)), RT305X_ESW_REG_SOCPC); - rt305x_esw_wr(esw, 0x3f502b28, RT305X_ESW_REG_FPA2); + rt305x_esw_wr(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2); rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA); /* Force Link/Activity on ports */ @@ -277,6 +277,18 @@ rt305x_esw_hw_init(struct rt305x_esw *esw) case RT305X_ESW_VLAN_CONFIG_NONE: break; + case RT305X_ESW_VLAN_CONFIG_BYPASS: + /* Pass all vlan tags to all ports */ + for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { + rt305x_esw_set_vlan_id(esw, i, i+1); + rt305x_esw_set_vmsc(esw, i, RT305X_ESW_PORTS_ALL); + } + /* Disable VLAN TAG removal, keep aging on. */ + rt305x_esw_wr(esw, + RT305X_ESW_PORTS_ALL << RT305X_ESW_POC3_ENAGING_S, + RT305X_ESW_REG_POC3); + break; + case RT305X_ESW_VLAN_CONFIG_LLLLW: rt305x_esw_set_vlan_id(esw, 0, 1); rt305x_esw_set_vlan_id(esw, 1, 2); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 12487854d5..8f4e211255 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -179,6 +179,10 @@ define Image/Build/Profile/NBG419N $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N) endef +define Image/Build/Profile/WL351 + $(call Image/Build/Template/GENERIC_4M,$(1),wl-351,WL-351) +endef + define Image/Build/Profile/NW718 $(call Image/Build/Template/NW718,$(1),nw718,NW718) endef @@ -271,6 +275,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/HW5503G,$(1)) $(call Image/Build/Profile/MOFI35003GN,$(1)) $(call Image/Build/Profile/WR5123GN,$(1)) + $(call Image/Build/Profile/WL351,$(1)) endef endif diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index 2a5473dfb2..68d9a23693 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_RT_G32_REVB=y CONFIG_RT305X_MACH_V22RW_2X2=y CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_WHR_G300N=y +CONFIG_RT305X_MACH_WL351=y CONFIG_RT305X_MACH_WR512_3GN=y # CONFIG_SCSI_DMA is not set CONFIG_SERIAL_8250_NR_UARTS=4