From: Heiko Schocher Date: Sun, 26 May 2019 10:15:47 +0000 (+0200) Subject: spi: imx: work with cs greater 0 X-Git-Tag: v2019.07~36^2~64 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=7a3faf31a7c2db55494b6af782b7a6cc7e7e8fe2;p=oweals%2Fu-boot.git spi: imx: work with cs greater 0 currently spi mxc driver can only handle cs 0. Allow it to handle also cs > 0. Signed-off-by: Heiko Schocher --- diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index fba76bf740..d94aaf9fdb 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -38,6 +38,8 @@ __weak int board_spi_cs_gpio(unsigned bus, unsigned cs) #define CONFIG_SYS_SPI_MXC_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */ #endif +#define MAX_CS_COUNT 4 + struct mxc_spi_slave { struct spi_slave slave; unsigned long base; @@ -50,6 +52,8 @@ struct mxc_spi_slave { unsigned int max_hz; unsigned int mode; struct gpio_desc ss; + struct gpio_desc cs_gpios[MAX_CS_COUNT]; + struct udevice *dev; }; static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) @@ -59,22 +63,38 @@ static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) static void mxc_spi_cs_activate(struct mxc_spi_slave *mxcs) { - if (CONFIG_IS_ENABLED(DM_SPI)) { - dm_gpio_set_value(&mxcs->ss, 1); - } else { - if (mxcs->gpio > 0) - gpio_set_value(mxcs->gpio, mxcs->ss_pol); - } +#if defined(CONFIG_DM_SPI) + struct udevice *dev = mxcs->dev; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + + u32 cs = slave_plat->cs; + + if (!dm_gpio_is_valid(&mxcs->cs_gpios[cs])) + return; + + dm_gpio_set_value(&mxcs->cs_gpios[cs], 1); +#else + if (mxcs->gpio > 0) + gpio_set_value(mxcs->gpio, mxcs->ss_pol); +#endif } static void mxc_spi_cs_deactivate(struct mxc_spi_slave *mxcs) { - if (CONFIG_IS_ENABLED(DM_SPI)) { - dm_gpio_set_value(&mxcs->ss, 0); - } else { - if (mxcs->gpio > 0) - gpio_set_value(mxcs->gpio, !(mxcs->ss_pol)); - } +#if defined(CONFIG_DM_SPI) + struct udevice *dev = mxcs->dev; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + + u32 cs = slave_plat->cs; + + if (!dm_gpio_is_valid(&mxcs->cs_gpios[cs])) + return; + + dm_gpio_set_value(&mxcs->cs_gpios[cs], 0); +#else + if (mxcs->gpio > 0) + gpio_set_value(mxcs->gpio, !(mxcs->ss_pol)); +#endif } u32 get_cspi_div(u32 div) @@ -492,23 +512,31 @@ static int mxc_spi_probe(struct udevice *bus) int node = dev_of_offset(bus); const void *blob = gd->fdt_blob; int ret; + int i; - if (gpio_request_by_name(bus, "cs-gpios", 0, &plat->ss, - GPIOD_IS_OUT)) { - dev_err(bus, "No cs-gpios property\n"); - return -EINVAL; + ret = gpio_request_list_by_name(bus, "cs-gpios", mxcs->cs_gpios, + ARRAY_SIZE(mxcs->cs_gpios), 0); + if (ret < 0) { + pr_err("Can't get %s gpios! Error: %d", bus->name, ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(mxcs->cs_gpios); i++) { + if (!dm_gpio_is_valid(&mxcs->cs_gpios[i])) + continue; + + ret = dm_gpio_set_dir_flags(&mxcs->cs_gpios[i], + GPIOD_IS_OUT | GPIOD_ACTIVE_LOW); + if (ret) { + dev_err(bus, "Setting cs %d error\n", i); + return ret; + } } mxcs->base = devfdt_get_addr(bus); if (mxcs->base == FDT_ADDR_T_NONE) return -ENODEV; - ret = dm_gpio_set_value(&mxcs->ss, 0); - if (ret) { - dev_err(bus, "Setting cs error\n"); - return ret; - } - mxcs->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 20000000); @@ -529,6 +557,8 @@ static int mxc_spi_claim_bus(struct udevice *dev) struct mxc_spi_slave *mxcs = dev_get_platdata(dev->parent); struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + mxcs->dev = dev; + return mxc_spi_claim_bus_internal(mxcs, slave_plat->cs); }