From: Ye.Li <B37916@freescale.com>
Date: Thu, 20 Nov 2014 13:14:14 +0000 (+0800)
Subject: mx6: thermal: Check cpu temperature via thermal sensor
X-Git-Tag: v2015.01-rc2~3^2~15
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=7a264168473b8a9ad94352d55a0392ae251676a8;p=oweals%2Fu-boot.git

mx6: thermal: Check cpu temperature via thermal sensor

Add imx6 thermal device to mx6 soc file. Read the cpu temperature
using this device to access onchip thermal sensor.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
---

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 5fd2a63a1d..5f5f497201 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -22,6 +22,8 @@
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/bootm.h>
+#include <dm.h>
+#include <imx_thermal.h>
 
 enum ldo_reg {
 	LDO_ARM,
@@ -37,6 +39,19 @@ struct scu_regs {
 	u32	fpga_rev;
 };
 
+#if defined(CONFIG_IMX6_THERMAL)
+static const struct imx_thermal_plat imx6_thermal_plat = {
+	.regs = (void *)ANATOP_BASE_ADDR,
+	.fuse_bank = 1,
+	.fuse_word = 6,
+};
+
+U_BOOT_DEVICE(imx6_thermal) = {
+	.name = "imx_thermal",
+	.platdata = &imx6_thermal_plat,
+};
+#endif
+
 u32 get_nr_cpus(void)
 {
 	struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index 24740b8603..8b2dfca611 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -17,6 +17,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <ipu_pixfmt.h>
+#include <thermal.h>
 
 #ifdef CONFIG_FSL_ESDHC
 #include <fsl_esdhc.h>
@@ -134,6 +135,11 @@ int print_cpuinfo(void)
 {
 	u32 cpurev;
 
+#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
+	struct udevice *thermal_dev;
+	int cpu_tmp, ret;
+#endif
+
 	cpurev = get_cpu_rev();
 
 	printf("CPU:   Freescale i.MX%s rev%d.%d at %d MHz\n",
@@ -141,6 +147,21 @@ int print_cpuinfo(void)
 		(cpurev & 0x000F0) >> 4,
 		(cpurev & 0x0000F) >> 0,
 		mxc_get_clock(MXC_ARM_CLK) / 1000000);
+
+#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
+	ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);
+	if (!ret) {
+		ret = thermal_get_temp(thermal_dev, &cpu_tmp);
+
+		if (!ret)
+			printf("CPU:   Temperature %d C\n", cpu_tmp);
+		else
+			printf("CPU:   Temperature: invalid sensor data\n");
+	} else {
+		printf("CPU:   Temperature: Can't find sensor device\n");
+	}
+#endif
+
 	printf("Reset cause: %s\n", get_reset_cause());
 	return 0;
 }