From: Kevin Schmidt Date: Sat, 23 Nov 2019 21:18:32 +0000 (+0100) Subject: lantiq: enable 5ghz wifi on VR200/VR200v X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=77e27e0f5354e3155c9951a0d5e570e36d548f1c;p=oweals%2Fopenwrt.git lantiq: enable 5ghz wifi on VR200/VR200v Enable mt76 driver on VR200/VR200v. Signed-off-by: Kevin Schmidt --- diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi index 93178da7e2..77b4f0defb 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi @@ -112,6 +112,25 @@ }; }; +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + wifi@0,0 { + reg = <0 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 0x0000>; + big-endian; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&romfile 0xf100>; + mtd-mac-address-increment = <2>; + }; + }; +}; + &pci0 { status = "okay"; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; @@ -166,7 +185,7 @@ read-only; }; - partition@ff0000 { + radio: partition@ff0000 { reg = <0xff0000 0x10000>; label = "radio"; read-only; diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk index 56a7e5ca57..fa98f31f59 100644 --- a/target/linux/lantiq/image/tp-link.mk +++ b/target/linux/lantiq/image/tp-link.mk @@ -47,7 +47,7 @@ define Device/tplink_vr200 TPLINK_HWID := 0x63e64801 TPLINK_HWREV := 0x53 IMAGE_SIZE := 15808k - DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport + DEVICE_PACKAGES:= kmod-mt76x0e wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport SUPPORTED_DEVICES += VR200 endef TARGET_DEVICES += tplink_vr200 @@ -60,7 +60,7 @@ define Device/tplink_vr200v TPLINK_HWID := 0x73b70801 TPLINK_HWREV := 0x2f IMAGE_SIZE := 15808k - DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-tapi kmod-ltq-vmmc + DEVICE_PACKAGES:= kmod-mt76x0e wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-tapi kmod-ltq-vmmc SUPPORTED_DEVICES += VR200v endef TARGET_DEVICES += tplink_vr200v