From: Andre Przywara Date: Mon, 15 Jul 2019 01:27:07 +0000 (+0100) Subject: sunxi: H6: Add DDR3 support to DRAM controller driver X-Git-Tag: v2019.10-rc1~27^2~7 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=75a8a641f313f019c406433856a6793def53dc4d;p=oweals%2Fu-boot.git sunxi: H6: Add DDR3 support to DRAM controller driver At the moment the H6 DRAM driver only supports LPDDR3 DRAM. Extend the driver to cover DDR3 DRAM as well. The changes are partly motivated by looking at the ZynqMP register documentation, partly by looking at register dumps after boot0/libdram has initialised the controller. Many thanks to Jernej for contributing some fixes! Signed-off-by: Andre Przywara Tested-by: Jernej Skrabec Reviewed-by: Jernej Skrabec Reviewed-by: Jagan Teki --- diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h index 54c4755556..0a1da02376 100644 --- a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h +++ b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h @@ -9,6 +9,8 @@ #ifndef _SUNXI_DRAM_SUN50I_H6_H #define _SUNXI_DRAM_SUN50I_H6_H +#include + enum sunxi_dram_type { SUNXI_DRAM_TYPE_DDR3 = 3, SUNXI_DRAM_TYPE_DDR4, @@ -16,6 +18,11 @@ enum sunxi_dram_type { SUNXI_DRAM_TYPE_LPDDR3, }; +static inline bool sunxi_dram_is_lpddr(int type) +{ + return type >= SUNXI_DRAM_TYPE_LPDDR2; +} + /* * The following information is mainly retrieved by disassembly and some FPGA * test code of sun50iw3 platform. @@ -286,6 +293,7 @@ check_member(sunxi_mctl_phy_reg, dx[3].reserved_0xf0, 0xaf0); #define DCR_DDR3 (3 << 0) #define DCR_DDR4 (4 << 0) #define DCR_DDR8BANK BIT(3) +#define DCR_DDR2T BIT(28) /* * The delay parameters allow to allegedly specify delay times of some diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c index 697b8af4ce..17649ffbf9 100644 --- a/arch/arm/mach-sunxi/dram_sun50i_h6.c +++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c @@ -42,6 +42,7 @@ static void mctl_core_init(struct dram_para *para) mctl_com_init(para); switch (para->type) { case SUNXI_DRAM_TYPE_LPDDR3: + case SUNXI_DRAM_TYPE_DDR3: mctl_set_timing_params(para); break; default: @@ -284,14 +285,11 @@ static void mctl_com_init(struct dram_para *para) mctl_set_addrmap(para); setbits_le32(&mctl_com->cr, BIT(31)); - /* - * This address is magic; it's in SID memory area, but there's no - * known definition of it. - * On my Pine H64 board it has content 7. - */ - if (readl(0x03006100) == 7) + + /* The bonding ID seems to be always 7. */ + if (readl(SUNXI_SIDC_BASE + 0x100) == 7) /* bonding ID */ clrbits_le32(&mctl_com->cr, BIT(27)); - else if (readl(0x03006100) == 3) + else if (readl(SUNXI_SIDC_BASE + 0x100) == 3) setbits_le32(&mctl_com->cr, BIT(27)); if (para->clk > 408) @@ -302,22 +300,37 @@ static void mctl_com_init(struct dram_para *para) reg_val = 0x3f00; clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val); - /* TODO: half DQ, non-LPDDR3 types */ - writel(MSTR_DEVICETYPE_LPDDR3 | MSTR_BUSWIDTH_FULL | - MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks) | - 0x80000000, &mctl_ctl->mstr); - writel(DCR_LPDDR3 | DCR_DDR8BANK | 0x400, &mctl_phy->dcr); + /* TODO: half DQ, DDR4 */ + reg_val = MSTR_BUSWIDTH_FULL | MSTR_BURST_LENGTH(8) | + MSTR_ACTIVE_RANKS(para->ranks); + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) + reg_val |= MSTR_DEVICETYPE_LPDDR3; + if (para->type == SUNXI_DRAM_TYPE_DDR3) + reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE; + writel(reg_val | BIT(31), &mctl_ctl->mstr); + + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) + reg_val = DCR_LPDDR3 | DCR_DDR8BANK; + if (para->type == SUNXI_DRAM_TYPE_DDR3) + reg_val = DCR_DDR3 | DCR_DDR8BANK | DCR_DDR2T; + writel(reg_val | 0x400, &mctl_phy->dcr); if (para->ranks == 2) writel(0x0303, &mctl_ctl->odtmap); else writel(0x0201, &mctl_ctl->odtmap); - /* TODO: non-LPDDR3 types */ - tmp = para->clk * 7 / 2000; - reg_val = 0x0400; - reg_val |= (tmp + 7) << 24; - reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16; + /* TODO: DDR4 */ + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { + tmp = para->clk * 7 / 2000; + reg_val = 0x0400; + reg_val |= (tmp + 7) << 24; + reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16; + } else if (para->type == SUNXI_DRAM_TYPE_DDR3) { + reg_val = 0x06000400; /* TODO?: Use CL - CWL value in [7:0] */ + } else { + panic("Only (LP)DDR3 supported (type = %d)\n", para->type); + } writel(reg_val, &mctl_ctl->odtcfg); /* TODO: half DQ */ @@ -372,6 +385,9 @@ static void mctl_bit_delay_set(struct dram_para *para) setbits_le32(&mctl_phy->pgcr[0], BIT(26)); udelay(1); + if (para->type != SUNXI_DRAM_TYPE_LPDDR3) + return; + for (i = 1; i < 14; i++) { val = readl(&mctl_phy->acbdlr[i]); val += 0x0a0a0a0a; @@ -419,7 +435,8 @@ static void mctl_channel_init(struct dram_para *para) else clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000); - clrbits_le32(&mctl_phy->dtcr[1], BIT(1)); + if (sunxi_dram_is_lpddr(para->type)) + clrbits_le32(&mctl_phy->dtcr[1], BIT(1)); if (para->ranks == 2) { writel(0x00010001, &mctl_phy->rankidr); writel(0x20000, &mctl_phy->odtcr); @@ -428,8 +445,11 @@ static void mctl_channel_init(struct dram_para *para) writel(0x10000, &mctl_phy->odtcr); } - /* TODO: non-LPDDR3 types */ - clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040); + /* set bits [3:0] to 1? 0 not valid in ZynqMP d/s */ + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) + clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040); + else + clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000000); if (para->clk <= 792) { if (para->clk <= 672) { if (para->clk <= 600) @@ -459,12 +479,13 @@ static void mctl_channel_init(struct dram_para *para) writel(0x06060606, &mctl_phy->acbdlr[i]); } - /* TODO: non-LPDDR3 types */ - mctl_phy_pir_init(PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | - PIR_QSGATE | PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | - PIR_WREYE); + val = PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | PIR_QSGATE | + PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | PIR_WREYE; + if (para->type == SUNXI_DRAM_TYPE_DDR3) + val |= PIR_DRAMRST | PIR_WL; + mctl_phy_pir_init(val); - /* TODO: non-LPDDR3 types */ + /* TODO: DDR4 types ? */ for (i = 0; i < 4; i++) writel(0x00000909, &mctl_phy->dx[i].gcr[5]); @@ -520,7 +541,8 @@ static void mctl_channel_init(struct dram_para *para) panic("Error while initializing DRAM PHY!\n"); } - clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40); + if (sunxi_dram_is_lpddr(para->type)) + clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40); clrbits_le32(&mctl_phy->pgcr[1], 0x40); clrbits_le32(&mctl_ctl->dfimisc, BIT(0)); writel(1, &mctl_ctl->swctl); @@ -589,11 +611,15 @@ unsigned long sunxi_dram_init(void) (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; struct dram_para para = { .clk = CONFIG_DRAM_CLK, -#ifdef CONFIG_SUNXI_DRAM_H6_LPDDR3 - .type = SUNXI_DRAM_TYPE_LPDDR3, .ranks = 2, .cols = 11, .rows = 14, +#ifdef CONFIG_SUNXI_DRAM_H6_LPDDR3 + .type = SUNXI_DRAM_TYPE_LPDDR3, + .dx_read_delays = SUN50I_H6_DX_READ_DELAYS, + .dx_write_delays = SUN50I_H6_DX_WRITE_DELAYS, +#elif defined(CONFIG_SUNXI_DRAM_H6_DDR3_1333) + .type = SUNXI_DRAM_TYPE_DDR3, .dx_read_delays = SUN50I_H6_DX_READ_DELAYS, .dx_write_delays = SUN50I_H6_DX_WRITE_DELAYS, #endif