From: Simon Glass Date: Sun, 14 Sep 2014 22:36:17 +0000 (-0600) Subject: dm: exynos: Move serial to driver model X-Git-Tag: v2015.01-rc1~208^2~43 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=73e256c2ac7a67b00be69a397997d80d04ec994d;p=oweals%2Fu-boot.git dm: exynos: Move serial to driver model Change the Exynos serial driver to work with driver model and switch over all relevant boards to use it. Signed-off-by: Simon Glass --- diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 98c62b4c14..8469afdaae 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -9,6 +9,8 @@ */ #include +#include +#include #include #include #include @@ -18,26 +20,18 @@ DECLARE_GLOBAL_DATA_PTR; -#define RX_FIFO_COUNT_MASK 0xff -#define RX_FIFO_FULL_MASK (1 << 8) -#define TX_FIFO_FULL_MASK (1 << 24) +#define RX_FIFO_COUNT_SHIFT 0 +#define RX_FIFO_COUNT_MASK (0xff << RX_FIFO_COUNT_SHIFT) +#define RX_FIFO_FULL (1 << 8) +#define TX_FIFO_COUNT_SHIFT 16 +#define TX_FIFO_COUNT_MASK (0xff << TX_FIFO_COUNT_SHIFT) +#define TX_FIFO_FULL (1 << 24) /* Information about a serial port */ -struct fdt_serial { - u32 base_addr; /* address of registers in physical memory */ +struct s5p_serial_platdata { + struct s5p_uart *reg; /* address of registers in physical memory */ u8 port_id; /* uart port number */ - u8 enabled; /* 1 if enabled, 0 if disabled */ -} config __attribute__ ((section(".data"))); - -static inline struct s5p_uart *s5p_get_base_uart(int dev_index) -{ -#ifdef CONFIG_OF_CONTROL - return (struct s5p_uart *)(config.base_addr); -#else - u32 offset = dev_index * sizeof(struct s5p_uart); - return (struct s5p_uart *)(samsung_get_base_uart() + offset); -#endif -} +}; /* * The coefficient, used to calculate the baudrate on S5P UARTs is @@ -65,23 +59,13 @@ static const int udivslot[] = { 0xffdf, }; -static void serial_setbrg_dev(const int dev_index) +int s5p_serial_setbrg(struct udevice *dev, int baudrate) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - u32 uclk = get_uart_clk(dev_index); - u32 baudrate = gd->baudrate; + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; + u32 uclk = get_uart_clk(plat->port_id); u32 val; -#if defined(CONFIG_SILENT_CONSOLE) && \ - defined(CONFIG_OF_CONTROL) && \ - !defined(CONFIG_SPL_BUILD) - if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0)) - gd->flags |= GD_FLG_SILENT; -#endif - - if (!config.enabled) - return; - val = uclk / baudrate; writel(val / 16 - 1, &uart->ubrdiv); @@ -90,15 +74,14 @@ static void serial_setbrg_dev(const int dev_index) writew(udivslot[val % 16], &uart->rest.slot); else writeb(val % 16, &uart->rest.value); + + return 0; } -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static int serial_init_dev(const int dev_index) +static int s5p_serial_probe(struct udevice *dev) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; /* enable FIFOs, auto clear Rx FIFO */ writel(0x3, &uart->ufcon); @@ -108,14 +91,11 @@ static int serial_init_dev(const int dev_index) /* No interrupts, no DMA, pure polling */ writel(0x245, &uart->ucon); - serial_setbrg_dev(dev_index); - return 0; } -static int serial_err_check(const int dev_index, int op) +static int serial_err_check(const struct s5p_uart *const uart, int op) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); unsigned int mask; /* @@ -133,169 +113,78 @@ static int serial_err_check(const int dev_index, int op) return readl(&uart->uerstat) & mask; } -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int serial_getc_dev(const int dev_index) +static int s5p_serial_getc(struct udevice *dev) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - - if (!config.enabled) - return 0; + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; - /* wait for character to arrive */ - while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK | - RX_FIFO_FULL_MASK))) { - if (serial_err_check(dev_index, 0)) - return 0; - } + if (!(readl(&uart->ufstat) & RX_FIFO_COUNT_MASK)) + return -EAGAIN; + serial_err_check(uart, 0); return (int)(readb(&uart->urxh) & 0xff); } -/* - * Output a single byte to the serial port. - */ -static void serial_putc_dev(const char c, const int dev_index) +static int s5p_serial_putc(struct udevice *dev, const char ch) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - - if (!config.enabled) - return; - - /* wait for room in the tx FIFO */ - while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) { - if (serial_err_check(dev_index, 1)) - return; - } + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; - writeb(c, &uart->utxh); + if (readl(&uart->ufstat) & TX_FIFO_FULL) + return -EAGAIN; - /* If \n, also do \r */ - if (c == '\n') - serial_putc('\r'); -} - -/* - * Test whether a character is in the RX buffer - */ -static int serial_tstc_dev(const int dev_index) -{ - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); + writeb(ch, &uart->utxh); + serial_err_check(uart, 1); - if (!config.enabled) - return 0; - - return (int)(readl(&uart->utrstat) & 0x1); + return 0; } -static void serial_puts_dev(const char *s, const int dev_index) +static int s5p_serial_pending(struct udevice *dev, bool input) { - while (*s) - serial_putc_dev(*s++, dev_index); -} + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; + uint32_t ufstat = readl(&uart->ufstat); -/* Multi serial device functions */ -#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \ -static int s5p_serial##port##_init(void) { return serial_init_dev(port); } \ -static void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \ -static int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \ -static int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \ -static void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \ -static void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); } - -#define INIT_S5P_SERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = s5p_serial##port##_init, \ - .stop = NULL, \ - .setbrg = s5p_serial##port##_setbrg, \ - .getc = s5p_serial##port##_getc, \ - .tstc = s5p_serial##port##_tstc, \ - .putc = s5p_serial##port##_putc, \ - .puts = s5p_serial##port##_puts, \ + if (input) + return (ufstat & RX_FIFO_COUNT_MASK) >> RX_FIFO_COUNT_SHIFT; + else + return (ufstat & TX_FIFO_COUNT_MASK) >> TX_FIFO_COUNT_SHIFT; } -DECLARE_S5P_SERIAL_FUNCTIONS(0); -struct serial_device s5p_serial0_device = - INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0"); -DECLARE_S5P_SERIAL_FUNCTIONS(1); -struct serial_device s5p_serial1_device = - INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1"); -DECLARE_S5P_SERIAL_FUNCTIONS(2); -struct serial_device s5p_serial2_device = - INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2"); -DECLARE_S5P_SERIAL_FUNCTIONS(3); -struct serial_device s5p_serial3_device = - INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3"); - -#ifdef CONFIG_OF_CONTROL -int fdtdec_decode_console(int *index, struct fdt_serial *uart) +static int s5p_serial_ofdata_to_platdata(struct udevice *dev) { - const void *blob = gd->fdt_blob; - int node; + struct s5p_serial_platdata *plat = dev->platdata; + fdt_addr_t addr; - node = fdt_path_offset(blob, "console"); - if (node < 0) - return node; + addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; - uart->base_addr = fdtdec_get_addr(blob, node, "reg"); - if (uart->base_addr == FDT_ADDR_T_NONE) - return -FDT_ERR_NOTFOUND; - - uart->port_id = fdtdec_get_int(blob, node, "id", -1); - uart->enabled = fdtdec_get_is_enabled(blob, node); + plat->reg = (struct s5p_uart *)addr; + plat->port_id = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "id", -1); return 0; } -#endif -__weak struct serial_device *default_serial_console(void) -{ -#ifdef CONFIG_OF_CONTROL - int index = 0; - - if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) { - debug("Cannot decode default console node\n"); - return NULL; - } - - switch (config.port_id) { - case 0: - return &s5p_serial0_device; - case 1: - return &s5p_serial1_device; - case 2: - return &s5p_serial2_device; - case 3: - return &s5p_serial3_device; - default: - debug("Unknown config.port_id: %d", config.port_id); - break; - } - - return NULL; -#else - config.enabled = 1; -#if defined(CONFIG_SERIAL0) - return &s5p_serial0_device; -#elif defined(CONFIG_SERIAL1) - return &s5p_serial1_device; -#elif defined(CONFIG_SERIAL2) - return &s5p_serial2_device; -#elif defined(CONFIG_SERIAL3) - return &s5p_serial3_device; -#else -#error "CONFIG_SERIAL? missing." -#endif -#endif -} +static const struct dm_serial_ops s5p_serial_ops = { + .putc = s5p_serial_putc, + .pending = s5p_serial_pending, + .getc = s5p_serial_getc, + .setbrg = s5p_serial_setbrg, +}; -void s5p_serial_initialize(void) -{ - serial_register(&s5p_serial0_device); - serial_register(&s5p_serial1_device); - serial_register(&s5p_serial2_device); - serial_register(&s5p_serial3_device); -} +static const struct udevice_id s5p_serial_ids[] = { + { .compatible = "samsung,exynos4210-uart" }, + { } +}; + +U_BOOT_DRIVER(serial_s5p) = { + .name = "serial_s5p", + .id = UCLASS_SERIAL, + .of_match = s5p_serial_ids, + .ofdata_to_platdata = s5p_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct s5p_serial_platdata), + .probe = s5p_serial_probe, + .ops = &s5p_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 4a4b22b74b..34a162d660 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -20,6 +20,7 @@ #define CONFIG_DM #define CONFIG_CMD_DM #define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 76b0503026..3633a355bd 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -292,5 +292,6 @@ #define CONFIG_DM #define CONFIG_CMD_DM #define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 424e130ec2..982d0dcea3 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -227,5 +227,6 @@ #define CONFIG_DM #define CONFIG_CMD_DM #define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */