From: Neil Armstrong Date: Tue, 28 May 2019 11:15:15 +0000 (+0200) Subject: boards: amlogic-g200: remove phy reset X-Git-Tag: v2019.07-rc4~15^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=7336cf34d1740cd3f2fa1ef353aa041ae39a0516;p=oweals%2Fu-boot.git boards: amlogic-g200: remove phy reset The PHY reset is now handled by the MAC driver, remove this leftover. Signed-off-by: Neil Armstrong --- diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c index 6db1b26e08..de97d6ad58 100644 --- a/board/amlogic/q200/q200.c +++ b/board/amlogic/q200/q200.c @@ -26,12 +26,6 @@ int misc_init_r(void) meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GX_GPIO_EN(3), BIT(14)); - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GX_GPIO_OUT(3), BIT(14)); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE);