From: Stephen Warren Date: Thu, 1 Nov 2012 12:14:37 +0000 (+0000) Subject: ARM: tegra: TrimSlice: add support for USB1 port X-Git-Tag: v2013.01-rc3~9^2~10 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=7155dc97f62a7bb3c64eee0a643c8e329abe9f3c;p=oweals%2Fu-boot.git ARM: tegra: TrimSlice: add support for USB1 port TrimSlice's USB1 port has two purposes; it either acts as a device port hosting Tegra's USB recovery protocol, or acts as a host port connected to the internal USB->SATA bridge chip, which may in turn be connected to an SSD or HDD. Add the appropriate device tree and board configuration options to enable this port as a host port, and route the port to the SATA bridge using the VBUS GPIO. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts index db79e7796d..4450674a75 100644 --- a/board/compulab/dts/tegra20-trimslice.dts +++ b/board/compulab/dts/tegra20-trimslice.dts @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; }; memory { @@ -48,7 +49,7 @@ }; usb@c5000000 { - status = "disabled"; + nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */ }; usb@c5004000 { diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 9ef66fd865..8f4dd09faa 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -34,6 +34,14 @@ #include #endif +void pin_mux_usb(void) +{ + /* + * USB1 internal/external mux GPIO, which masquerades as a VBUS GPIO + * in the current device tree. + */ + pinmux_tristate_disable(PINGRP_UAC); +} void pin_mux_spi(void) { diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index eeb0dbe237..165bc73c52 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -80,6 +80,7 @@ #define CONFIG_ENV_OFFSET (512 * 1024) /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE