From: Matti Laakso <matti.laakso@outlook.com>
Date: Sun, 14 Jan 2018 15:39:53 +0000 (+0200)
Subject: ar71xx: fix 5 GHz Wi-Fi on NBG6716
X-Git-Tag: v17.01.5~4
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=71019a7605d5156fc1ade1265cae859241caccbe;p=oweals%2Fopenwrt.git

ar71xx: fix 5 GHz Wi-Fi on NBG6716

Some NBG6716 do not have ath10k calibration data in flash, only in chip
OTP. To determine if flash has a valid calibration data, the first two
bytes telling the length of the calibration data are checked against the
requested length. If the lengths match, calibration data is valid and
read from flash.

Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
---

diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index b3e23c9a8f..96ca65e694 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -18,12 +18,18 @@ ath10kcal_extract() {
 	local part=$1
 	local offset=$2
 	local count=$3
-	local mtd
+	local mtd cal_size
 
 	mtd=$(find_mtd_chardev $part)
 	[ -n "$mtd" ] || \
 		ath10kcal_die "no mtd device found for partition $part"
 
+	# Check that the calibration data size in header equals the desired size
+	cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"')
+
+	[ "$count" = "$cal_size" ] || \
+		ath10kcal_die "no calibration data found in $part"
+
 	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
 		ath10kcal_die "failed to extract calibration data from $mtd"
 }