From: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue, 24 Sep 2013 18:36:49 +0000 (-0700)
Subject: Updated usb regs (markdown)
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=70bb22d1a0a4cd215e0895b2795d5fd7707b5c93;p=librecmc%2Fopen-ath9k-htc-firmware.wiki.git

Updated usb regs (markdown)
---

diff --git a/usb-regs.md b/usb-regs.md
index bc22852..8c0cabc 100644
--- a/usb-regs.md
+++ b/usb-regs.md
@@ -366,23 +366,59 @@ Current layout:
 # 0x9e mUsbFIFOConfig FIFO14                                                                     
 # 0x9f mUsbFIFOConfig FIFO15  
 
-# 0xAE ZM_EP3_BYTE_COUNT_HIGH_OFFSET
+# 0xa0 FUSB_REG_FIFO0_INS
+* BIT0 - BIT2 - high offset of byte count in fifo.
+
+# 0xa1 FUSB_REG_FIFO1_INS
+# 0xa2 FUSB_REG_FIFO2_INS
+# 0xa3 FUSB_REG_FIFO3_INS
+# 0xa4 FUSB_REG_FIFO4_INS
+# 0xa5 FUSB_REG_FIFO5_INS
+# 0xa6 FUSB_REG_FIFO6_INS
+# 0xa7 FUSB_REG_FIFO7_INS
+# 0xa8 FUSB_REG_FIFO8_INS
+# 0xa9 FUSB_REG_FIFO9_INS
+# 0xaa FUSB_REG_FIFO10_INS
+# 0xab FUSB_REG_FIFO11_INS
+# 0xac FUSB_REG_FIFO12_INS
+# 0xad FUSB_REG_FIFO13_INS
+# 0xae FUSB_REG_FIFO14_INS
+or known as ZM_EP3_BYTE_COUNT_HIGH_OFFSET  
     BIT3 - 1 xfer done?
     comments: after sending data from target to host, set BIT3
 
-# 0xAF ZM_EP4_BYTE_COUNT_HIGH_OFFSET
+# 0xaf FUSB_REG_FIFO15_INS
+or known ZM_EP4_BYTE_COUNT_HIGH_OFFSET  
     BIT4 - 1 - reset fifo; 0 - disable reset?
     comments: probably compatible with ZM_EP3_BYTE_COUNT_HIGH_OFFSET.  
 **These name reg do not fit to pattern!!!** Compare with 0x3e, 0x3f and 0x5e, 0x5f.
 If we have 0x3e, 0x3f and 0x5e, 0x5f, why do we need this register?
 
-# 0xBE ZM_EP3_BYTE_COUNT_LOW_OFFSET
+# 0xb0 FUSB_REG_FIFO0_BCNT
+# 0xb1 FUSB_REG_FIFO1_BCNT
+# 0xb2 FUSB_REG_FIFO2_BCNT
+# 0xb3 FUSB_REG_FIFO3_BCNT
+# 0xb4 FUSB_REG_FIFO4_BCNT
+# 0xb5 FUSB_REG_FIFO5_BCNT
+# 0xb6 FUSB_REG_FIFO6_BCNT
+# 0xb7 FUSB_REG_FIFO7_BCNT
+# 0xb8 FUSB_REG_FIFO8_BCNT
+# 0xb9 FUSB_REG_FIFO9_BCNT
+# 0xba FUSB_REG_FIFO10_BCNT
+# 0xbb FUSB_REG_FIFO11_BCNT
+# 0xbc FUSB_REG_FIFO12_BCNT
+# 0xbd FUSB_REG_FIFO13_BCNT
+# 0xbe FUSB_REG_FIFO14_BCNT
+or known as ZM_EP3_BYTE_COUNT_LOW_OFFSET  
     size of data in fifo buffer? never used?
 
-# 0xBF ZM_EP4_BYTE_COUNT_LOW_OFFSET
+# 0xbf FUSB_REG_FIFO15_BCNT
+or known as ZM_EP4_BYTE_COUNT_LOW_OFFSET  
     size of data in fifo buffer. Maximum size of EP4 should be 64 Bytes. If reported value is bigger, then buffer is defiantly corrupt.
 
 # 0xc0 FIFO0 DATA OFFSET?
+or known as FUSB_REG_FIFO0_DP  
+
 # 0xc4 FIFO1 DATA OFFSET?
 # 0xc8 FIFO2 DATA OFFSET?
 # 0xcc FIFO3 DATA OFFSET?