From: Patrick Delaunay Date: Fri, 29 Mar 2019 14:42:24 +0000 (+0100) Subject: stm32mp1: add stusb1600 support for DK1 and DK2 board X-Git-Tag: v2019.07-rc1~13^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6fe7dd3327d552bacf4266d7f1ed074bf98ffb92;p=oweals%2Fu-boot.git stm32mp1: add stusb1600 support for DK1 and DK2 board The DK1 and DK2 boards use the USB Type-C controller STUSB1600. This patch updates: - the device tree to add the I2C node in the DT - the board stm32mp1 to probe this I2C device and use this controller to check cable detection. - the DWC2 driver to support a new dt property "u-boot,force-b-session-valid" which forces B session and device mode; it is a workaround because the VBUS sensing and ID detection isn't available with stusb1600. Signed-off-by: Patrick Delaunay Reviewed-by: Lukasz Majewski --- diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index c069875486..0aae69b0a0 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -375,6 +375,13 @@ }; }; + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = ; + bias-pull-up; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = ; /* UART4_TX */ diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 7e2c5d0de3..0f32a38dc9 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -191,7 +191,7 @@ }; &usbotg_hs { - force-b-session-valid; + u-boot,force-b-session-valid; hnp-srp-disable; }; diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts index b8ef82015b..e36773dde9 100644 --- a/arch/arm/dts/stm32mp157a-dk1.dts +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -67,6 +67,24 @@ /delete-property/dmas; /delete-property/dma-names; + typec: stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + pinctrl-names = "default"; + pinctrl-0 = <&stusb1600_pins_a>; + + status = "okay"; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "sink"; + power-opmode = "default"; + }; + }; + pmic: stpmic@33 { compatible = "st,stpmic1"; reg = <0x33>; diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index b369b7a54b..76917b022e 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -9,15 +9,18 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include #include #include +#include /* SYSCFG registers */ #define SYSCFG_BOOTR 0x00 @@ -151,11 +154,64 @@ static void board_key_check(void) #if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) +/* STMicroelectronics STUSB1600 Type-C controller */ +#define STUSB1600_CC_CONNECTION_STATUS 0x0E + +/* STUSB1600_CC_CONNECTION_STATUS bitfields */ +#define STUSB1600_CC_ATTACH BIT(0) + +static int stusb1600_init(struct udevice **dev_stusb1600) +{ + ofnode node; + struct udevice *dev, *bus; + int ret; + u32 chip_addr; + + *dev_stusb1600 = NULL; + + /* if node stusb1600 is present, means DK1 or DK2 board */ + node = ofnode_by_compatible(ofnode_null(), "st,stusb1600"); + if (!ofnode_valid(node)) + return -ENODEV; + + ret = ofnode_read_u32(node, "reg", &chip_addr); + if (ret) + return -EINVAL; + + ret = uclass_get_device_by_ofnode(UCLASS_I2C, ofnode_get_parent(node), + &bus); + if (ret) { + printf("bus for stusb1600 not found\n"); + return -ENODEV; + } + + ret = dm_i2c_probe(bus, chip_addr, 0, &dev); + if (!ret) + *dev_stusb1600 = dev; + + return ret; +} + +static int stusb1600_cable_connected(struct udevice *dev) +{ + u8 status; + + if (dm_i2c_read(dev, STUSB1600_CC_CONNECTION_STATUS, &status, 1)) + return 0; + + return status & STUSB1600_CC_ATTACH; +} + +#include int g_dnl_board_usb_cable_connected(void) { + struct udevice *stusb1600; struct udevice *dwc2_udc_otg; int ret; + if (!stusb1600_init(&stusb1600)) + return stusb1600_cable_connected(stusb1600); + ret = uclass_get_device_by_driver(UCLASS_USB_GADGET_GENERIC, DM_GET_DRIVER(dwc2_udc_otg), &dwc2_udc_otg); diff --git a/doc/device-tree-bindings/usb/dwc2.txt b/doc/device-tree-bindings/usb/dwc2.txt index eb60ffae58..61493f7cb0 100644 --- a/doc/device-tree-bindings/usb/dwc2.txt +++ b/doc/device-tree-bindings/usb/dwc2.txt @@ -39,6 +39,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. - usb33d-supply: external VBUS and ID sensing comparators supply, in order to perform OTG operation, used on STM32MP1 SoCs. +- u-boot,force-b-session-valid: force B-peripheral session instead of relying on + VBUS sensing (only valid when dr_mode = "peripheral" and for u-boot). Deprecated properties: - g-use-dma: gadget DMA mode is automatically detected diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c index 3fdaa102ba..494ab533cc 100644 --- a/drivers/usb/gadget/dwc2_udc_otg.c +++ b/drivers/usb/gadget/dwc2_udc_otg.c @@ -1053,7 +1053,7 @@ static int dwc2_udc_otg_ofdata_to_platdata(struct udevice *dev) platdata->tx_fifo_sz = dev_read_u32_default(dev, "g-tx-fifo-size", 0); platdata->force_b_session_valid = - dev_read_bool(dev, "force-b-session-valid"); + dev_read_bool(dev, "u-boot,force-b-session-valid"); /* force platdata according compatible */ drvdata = dev_get_driver_data(dev); @@ -1075,6 +1075,9 @@ static void dwc2_set_stm32mp1_hsotg_params(struct dwc2_plat_otg_data *p) | 0 << 8 /* [0:SRP disable 1:SRP enable]*/ | 0 << 6 /* 0: high speed utmi+, 1: full speed serial*/ | 0x7 << 0; /* FS timeout calibration**/ + + if (p->force_b_session_valid) + p->usb_gusbcfg |= 1 << 30; /* FDMOD: Force device mode */ } static int dwc2_udc_otg_reset_init(struct udevice *dev, @@ -1166,7 +1169,8 @@ static int dwc2_udc_otg_probe(struct udevice *dev) if (platdata->force_b_session_valid) /* Override B session bits : value and enable */ - setbits_le32(&usbotg_reg->gotgctl, B_VALOEN | B_VALOVAL); + setbits_le32(&usbotg_reg->gotgctl, + A_VALOEN | A_VALOVAL | B_VALOEN | B_VALOVAL); ret = dwc2_udc_probe(platdata); if (ret)