From: Simon Glass Date: Fri, 4 Aug 2017 22:34:38 +0000 (-0600) Subject: Kconfig: Drop CONFIG_CMD_PORTIO and associated command X-Git-Tag: v2017.09-rc2~70 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6f62d7c4f7a2242a76e19b09dccca6f68776e788;p=oweals%2Fu-boot.git Kconfig: Drop CONFIG_CMD_PORTIO and associated command This command is not used by any board. It also looks quite similar to the 'iod' and 'iow' commands which use the correct I/O macros. Drop it. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Philipp Tomsich --- diff --git a/README b/README index 17c055a1ec..98fc95a915 100644 --- a/README +++ b/README @@ -814,7 +814,6 @@ The following options need to be configured: CONFIG_CMD_NFS NFS support CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network host - CONFIG_CMD_PORTIO * Port I/O CONFIG_CMD_READ * Read raw data from partition CONFIG_CMD_REGINFO * Register dump CONFIG_CMD_RUN run command in env variable diff --git a/cmd/Makefile b/cmd/Makefile index bd231f24d8..eff6bd678f 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -97,7 +97,6 @@ ifdef CONFIG_PCI obj-$(CONFIG_CMD_PCI) += pci.o endif obj-y += pcmcia.o -obj-$(CONFIG_CMD_PORTIO) += portio.o obj-$(CONFIG_CMD_PXE) += pxe.o obj-$(CONFIG_CMD_QFW) += qfw.o obj-$(CONFIG_CMD_READ) += read.o diff --git a/cmd/portio.c b/cmd/portio.c deleted file mode 100644 index bf3a99791c..0000000000 --- a/cmd/portio.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2003 - * Marc Singer, elf@buici.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Port I/O Functions - * - * Copied from FADS ROM, Dan Malek (dmalek@jlc.net) - */ - -#include -#include - -/* Display values from last command. - * Memory modify remembered values are different from display memory. - */ -static uint in_last_addr, in_last_size; -static uint out_last_addr, out_last_size, out_last_value; - - -int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - uint addr = out_last_addr; - uint size = out_last_size; - uint value = out_last_value; - - if (argc != 3) - return CMD_RET_USAGE; - - if ((flag & CMD_FLAG_REPEAT) == 0) { - /* - * New command specified. Check for a size specification. - * Defaults to long if no or incorrect specification. - */ - size = cmd_get_data_size (argv[0], 1); - addr = simple_strtoul (argv[1], NULL, 16); - value = simple_strtoul (argv[2], NULL, 16); - } -#if defined (CONFIG_X86) - - { - unsigned short port = addr; - - switch (size) { - default: - case 1: - { - unsigned char ch = value; - __asm__ volatile ("out %0, %%dx"::"a" (ch), "d" (port)); - } - break; - case 2: - { - unsigned short w = value; - __asm__ volatile ("out %0, %%dx"::"a" (w), "d" (port)); - } - break; - case 4: - __asm__ volatile ("out %0, %%dx"::"a" (value), "d" (port)); - - break; - } - } - -#endif /* CONFIG_X86 */ - - out_last_addr = addr; - out_last_size = size; - out_last_value = value; - - return 0; -} - -U_BOOT_CMD( - out, 3, 1, do_portio_out, - "write datum to IO port", - "[.b, .w, .l] port value\n - output to IO port" -); - -int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - uint addr = in_last_addr; - uint size = in_last_size; - - if (argc != 2) - return CMD_RET_USAGE; - - if ((flag & CMD_FLAG_REPEAT) == 0) { - /* - * New command specified. Check for a size specification. - * Defaults to long if no or incorrect specification. - */ - size = cmd_get_data_size (argv[0], 1); - addr = simple_strtoul (argv[1], NULL, 16); - } -#if defined (CONFIG_X86) - - { - unsigned short port = addr; - - switch (size) { - default: - case 1: - { - unsigned char ch; - __asm__ volatile ("in %%dx, %0":"=a" (ch):"d" (port)); - - printf (" %02x\n", ch); - } - break; - case 2: - { - unsigned short w; - __asm__ volatile ("in %%dx, %0":"=a" (w):"d" (port)); - - printf (" %04x\n", w); - } - break; - case 4: - { - unsigned long l; - __asm__ volatile ("in %%dx, %0":"=a" (l):"d" (port)); - - printf (" %08lx\n", l); - } - break; - } - } -#endif /* CONFIG_X86 */ - - in_last_addr = addr; - in_last_size = size; - - return 0; -} - -U_BOOT_CMD( - in, 2, 1, do_portio_in, - "read data from an IO port", - "[.b, .w, .l] port\n" - " - read datum from IO port" -); diff --git a/include/command.h b/include/command.h index 08f04867dd..767cabb3df 100644 --- a/include/command.h +++ b/include/command.h @@ -80,11 +80,10 @@ int cmd_process_error(cmd_tbl_t *cmdtp, int err); * void function (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); */ -#if defined(CONFIG_CMD_MEMORY) \ - || defined(CONFIG_CMD_I2C) \ - || defined(CONFIG_CMD_ITEST) \ - || defined(CONFIG_CMD_PCI) \ - || defined(CONFIG_CMD_PORTIO) +#if defined(CONFIG_CMD_MEMORY) || \ + defined(CONFIG_CMD_I2C) || \ + defined(CONFIG_CMD_ITEST) || \ + defined(CONFIG_CMD_PCI) #define CMD_DATA_SIZE extern int cmd_get_data_size(char* arg, int default_size); #endif diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index a008bacdd9..35a6a529eb 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -13,7 +13,6 @@ * Alphabetical list of all possible commands. */ -#define CONFIG_CMD_PORTIO /* Port I/O */ #define CONFIG_CMD_REGINFO /* Register dump */ #define CONFIG_CMD_REISER /* Reiserfs support */ #define CONFIG_CMD_READ /* Read data from partition */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 358b17c31d..fdfca1a370 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -293,7 +293,6 @@ CONFIG_CM922T_XA10 CONFIG_CMDLINE_EDITING CONFIG_CMDLINE_PS_SUPPORT CONFIG_CMDLINE_TAG -CONFIG_CMD_PORTIO CONFIG_CMD_READ CONFIG_CMD_REGINFO CONFIG_CMD_REISER