From: Ben Mulvihill Date: Tue, 8 Nov 2016 21:03:14 +0000 (+0100) Subject: lantiq: dwc2 parameters for danube X-Git-Tag: v17.01.0-rc1~774 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6f60926babe50cd1aa24fb849577fff9fe7f46b4;p=oweals%2Fopenwrt.git lantiq: dwc2 parameters for danube Parameters for dwc2 on lantiq. A separate dwc2_core_params structure is defined for danube because danube fifo sizes are large enough to be autodetected. This is not the case on arx and vrx. Signed-off-by: Ben Mulvihill --- diff --git a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch index ea3e48c3dd..68d5f3ff4d 100644 --- a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch +++ b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch @@ -1,6 +1,6 @@ --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c -@@ -145,6 +145,34 @@ static int __dwc2_lowlevel_hw_enable(str +@@ -145,6 +145,62 @@ static int __dwc2_lowlevel_hw_enable(str return ret; } @@ -31,14 +31,43 @@ + .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = -1, +}; ++ ++static const struct dwc2_core_params params_danube = { ++ .otg_cap = 2, /* non-HNP/non-SRP */ ++ .otg_ver = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .speed = -1, ++ .enable_dynamic_fifo = -1, ++ .en_multiple_tx_fifo = -1, ++ .host_rx_fifo_size = -1, ++ .host_nperio_tx_fifo_size = -1, ++ .host_perio_tx_fifo_size = -1, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .ts_dline = -1, ++ .reload_ctl = -1, ++ .ahbcfg = -1, ++ .uframe_sched = -1, ++}; + /** * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources * @hsotg: The driver state -@@ -310,6 +338,8 @@ static int dwc2_driver_remove(struct pla +@@ -310,6 +366,9 @@ static int dwc2_driver_remove(struct pla static const struct of_device_id dwc2_of_match_table[] = { { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, ++ { .compatible = "lantiq,ifxhcd-danube-dwc2", .data = ¶ms_danube }, + { .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = ¶ms_ltq }, + { .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = ¶ms_ltq }, { .compatible = "snps,dwc2", .data = NULL },