From: Simon Glass Date: Mon, 4 Jul 2016 17:58:31 +0000 (-0600) Subject: rockchip: Move the MMC setup check earlier X-Git-Tag: v2016.09-rc1~82^2~11 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6efeeea79c880d3dd262e0dca9da2687f0ab68c9;p=oweals%2Fu-boot.git rockchip: Move the MMC setup check earlier When the boot ROM sets up MMC we don't need to do it again. Remove the MMC setup code entirely. Signed-off-by: Simon Glass --- diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index 15f1266a7b..d8c9ca71cf 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -114,7 +114,6 @@ static void configure_l2ctlr(void) #ifdef CONFIG_SPL_MMC_SUPPORT static int configure_emmc(struct udevice *pinctrl) { -#if !defined(CONFIG_TARGET_ROCK2) && !defined(CONFIG_TARGET_FIREFLY_RK3288) struct gpio_desc desc; int ret; @@ -144,7 +143,6 @@ static int configure_emmc(struct udevice *pinctrl) debug("gpio value ret=%d\n", ret); return ret; } -#endif return 0; } @@ -247,15 +245,18 @@ void spl_board_init(void) goto err; } #ifdef CONFIG_SPL_MMC_SUPPORT - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); - if (ret) { - debug("%s: Failed to set up SD card\n", __func__); - goto err; - } - ret = configure_emmc(pinctrl); - if (ret) { - debug("%s: Failed to set up eMMC\n", __func__); - goto err; + if (!IS_ENABLED(CONFIG_TARGET_ROCK2) && + !IS_ENABLED(CONFIG_TARGET_FIREFLY_RK3288)) { + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); + if (ret) { + debug("%s: Failed to set up SD card\n", __func__); + goto err; + } + ret = configure_emmc(pinctrl); + if (ret) { + debug("%s: Failed to set up eMMC\n", __func__); + goto err; + } } #endif