From: Marcel Ziswiler Date: Fri, 8 Feb 2019 17:42:12 +0000 (+0100) Subject: colibri_imx6: migrate i2c to using driver model X-Git-Tag: v2019.07-rc1~21^2~74 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6eea69bd90a0a967021ea78a667f990b5aa856b5;p=oweals%2Fu-boot.git colibri_imx6: migrate i2c to using driver model Migrate I2C to using driver model. Signed-off-by: Marcel Ziswiler --- diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 0c2fa65cfe..0131d9a635 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -20,13 +20,11 @@ #include #include #include -#include #include #include #include #include #include -#include #include #include #include @@ -50,16 +48,6 @@ DECLARE_GLOBAL_DATA_PTR; #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) - -#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - #define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_SRE_SLOW) @@ -72,8 +60,6 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ PAD_CTL_HYS | PAD_CTL_SRE_SLOW) -#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) - #define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST) int dram_init(void) @@ -91,36 +77,7 @@ iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* Colibri I2C */ -struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC, - .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC, - .gp = IMX_GPIO_NR(1, 3) - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC, - .gp = IMX_GPIO_NR(1, 6) - } -}; - -/* Colibri local, PMIC, SGTL5000, STMPE811 */ -struct i2c_pads_info i2c_pad_info_loc = { - .scl = { - .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, - .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, - .gp = IMX_GPIO_NR(2, 30) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, - .gp = IMX_GPIO_NR(3, 16) - } -}; - -/* Apalis MMC */ +/* Colibri MMC */ iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -715,9 +672,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc); - #if defined(CONFIG_VIDEO_IPUV3) setup_display(); #endif @@ -1150,7 +1104,7 @@ void board_init_f(ulong dummy) ccgr_init(); gpr_init(); - /* iomux and setup of i2c */ + /* iomux */ board_early_init_f(); /* setup GP timer */ diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c index fa63865670..5e411f1743 100644 --- a/board/toradex/colibri_imx6/pf0100.c +++ b/board/toradex/colibri_imx6/pf0100.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2014-2016, Toradex AG + * Copyright (C) 2014-2019, Toradex AG */ /* @@ -29,22 +29,25 @@ static __maybe_unused iomux_v3_cfg_t const pmic_prog_pads[] = { unsigned pmic_init(void) { + int rc; + struct udevice *dev = NULL; unsigned programmed = 0; uchar bus = 1; uchar devid, revid, val; puts("PMIC: "); - if (!((0 == i2c_set_bus_num(bus)) && - (0 == i2c_probe(PFUZE100_I2C_ADDR)))) { - puts("i2c bus failed\n"); + rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev); + if (rc) { + printf("failed to get device for PMIC at address 0x%x\n", + PFUZE100_I2C_ADDR); return 0; } /* get device ident */ - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_DEVICEID, 1, &devid, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_DEVICEID, &devid, 1) < 0) { puts("i2c pmic devid read failed\n"); return 0; } - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_REVID, 1, &revid, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_REVID, &revid, 1) < 0) { puts("i2c pmic revid read failed\n"); return 0; } @@ -52,14 +55,14 @@ unsigned pmic_init(void) #ifdef DEBUG { - unsigned i, j; + unsigned int i, j; for (i = 0; i < 16; i++) printf("\t%x", i); for (j = 0; j < 0x80; ) { printf("\n%2x", j); for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); + dm_i2c_read(dev, j + i, &val, 1); printf("\t%2x", val); } j += 0x10; @@ -67,8 +70,7 @@ unsigned pmic_init(void) printf("\nEXT Page 1"); val = PFUZE100_PAGE_REGISTER_PAGE1; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, - &val, 1)) { + if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { puts("i2c write failed\n"); return 0; } @@ -76,7 +78,7 @@ unsigned pmic_init(void) for (j = 0x80; j < 0x100; ) { printf("\n%2x", j); for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); + dm_i2c_read(dev, j + i, &val, 1); printf("\t%2x", val); } j += 0x10; @@ -84,8 +86,7 @@ unsigned pmic_init(void) printf("\nEXT Page 2"); val = PFUZE100_PAGE_REGISTER_PAGE2; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, - &val, 1)) { + if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { puts("i2c write failed\n"); return 0; } @@ -93,35 +94,36 @@ unsigned pmic_init(void) for (j = 0x80; j < 0x100; ) { printf("\n%2x", j); for (i = 0; i < 16; i++) { - i2c_read(PFUZE100_I2C_ADDR, j+i, 1, &val, 1); + dm_i2c_read(dev, j + i, &val, 1); printf("\t%2x", val); } j += 0x10; } printf("\n"); } -#endif +#endif /* DEBUG */ + /* get device programmed state */ val = PFUZE100_PAGE_REGISTER_PAGE1; - if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) { + if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) { puts("i2c write failed\n"); return 0; } - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_FUSE_POR1, &val, 1) < 0) { puts("i2c fuse_por read failed\n"); return 0; } if (val & PFUZE100_FUSE_POR_M) programmed++; - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_FUSE_POR2, &val, 1) < 0) { puts("i2c fuse_por read failed\n"); return programmed; } if (val & PFUZE100_FUSE_POR_M) programmed++; - if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) { + if (dm_i2c_read(dev, PFUZE100_FUSE_POR3, &val, 1) < 0) { puts("i2c fuse_por read failed\n"); return programmed; } @@ -146,6 +148,8 @@ unsigned pmic_init(void) #ifndef CONFIG_SPL_BUILD static int pf0100_prog(void) { + int rc; + struct udevice *dev = NULL; unsigned char bus = 1; unsigned char val; unsigned int i; @@ -159,9 +163,10 @@ static int pf0100_prog(void) ARRAY_SIZE(pmic_prog_pads)); gpio_direction_output(PMIC_PROG_VOLTAGE, 0); - if (!((0 == i2c_set_bus_num(bus)) && - (0 == i2c_probe(PFUZE100_I2C_ADDR)))) { - puts("i2c bus failed\n"); + rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev); + if (rc) { + printf("failed to get device for PMIC at address 0x%x\n", + PFUZE100_I2C_ADDR); return CMD_RET_FAILURE; } @@ -169,8 +174,7 @@ static int pf0100_prog(void) switch (pmic_otp_prog[i].cmd) { case pmic_i2c: val = (unsigned char) (pmic_otp_prog[i].value & 0xff); - if (i2c_write(PFUZE100_I2C_ADDR, pmic_otp_prog[i].reg, - 1, &val, 1)) { + if (dm_i2c_write(dev, pmic_otp_prog[i].reg, &val, 1)) { printf("i2c write failed, reg 0x%2x, value 0x%2x\n", pmic_otp_prog[i].reg, val); return CMD_RET_FAILURE; @@ -209,4 +213,4 @@ U_BOOT_CMD( "Program the OTP fuses on the PMIC PF0100", "" ); -#endif +#endif /* CONFIG_SPL_BUILD */ diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 481d65329f..dea6ca6270 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -51,6 +51,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y CONFIG_FSL_ESDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index f029a885d2..e51ec8516f 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -32,12 +32,12 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_MXC_I2C3_SPEED 400000 /* OCOTP Configs */ #ifdef CONFIG_CMD_FUSE