From: John Crispin <john@openwrt.org>
Date: Fri, 14 Nov 2014 16:53:29 +0000 (+0000)
Subject: ralink: enable the proper drivers in the mt7621 config
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6d4282086d1690e4fb8467319faddb472f796c43;p=librecmc%2Flibrecmc.git

ralink: enable the proper drivers in the mt7621 config

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43252
---

diff --git a/target/linux/ramips/mt7621/config-3.14 b/target/linux/ramips/mt7621/config-3.14
index 8a75b3b4a7..c938309018 100644
--- a/target/linux/ramips/mt7621/config-3.14
+++ b/target/linux/ramips/mt7621/config-3.14
@@ -38,14 +38,6 @@ CONFIG_DMA_NONCOHERENT=y
 CONFIG_DTB_RT_NONE=y
 CONFIG_DTC=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_ESW_DOUBLE_VLAN_TAG=y
-# CONFIG_GE1_MII_AN is not set
-# CONFIG_GE1_MII_FORCE_100 is not set
-# CONFIG_GE1_RGMII_AN is not set
-# CONFIG_GE1_RGMII_FORCE_1000 is not set
-# CONFIG_GE1_RGMII_NONE is not set
-# CONFIG_GE1_RVMII_FORCE_100 is not set
-# CONFIG_GE1_TRGMII_FORCE_1200 is not set
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -57,8 +49,8 @@ CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
-# CONFIG_GPIO_MT7621 is not set
-CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_MT7621=y
+# CONFIG_GPIO_RALINK is not set
 CONFIG_GPIO_SYSFS=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
@@ -104,7 +96,6 @@ CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_GIC=y
 CONFIG_IRQ_WORK=y
-# CONFIG_LAN_WAN_SUPPORT is not set
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
 CONFIG_MIPS_CMP=y
@@ -122,8 +113,7 @@ CONFIG_MIPS_MT_SMP=y
 CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_ASIC=y
-# CONFIG_MT7621_WDT is not set
+CONFIG_MT7621_WDT=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
@@ -161,21 +151,13 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_RT2880=y
 # CONFIG_PINCTRL_SINGLE is not set
 # CONFIG_PREEMPT_RCU is not set
-# CONFIG_RAETH is not set
-# CONFIG_RAETH_NAPI is not set
-# CONFIG_RAETH_TSO is not set
 CONFIG_RALINK=y
-CONFIG_RALINK_MT7621=y
 CONFIG_RALINK_USBPHY=y
 # CONFIG_RALINK_WDT is not set
-CONFIG_RA_NAT_NONE=y
-# CONFIG_RA_NETWORK_TASKLET_BH is not set
-# CONFIG_RA_NETWORK_WORKQUEUE_BH is not set
 CONFIG_RCU_STALL_COMMON=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
-CONFIG_RT_3052_ESW=y
 CONFIG_SCHED_SMT=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
@@ -218,8 +200,6 @@ CONFIG_USB_SUPPORT=y
 CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USE_OF=y
-# CONFIG_WAN_AT_P0 is not set
-# CONFIG_WAN_AT_P4 is not set
 CONFIG_WATCHDOG_CORE=y
 CONFIG_WEAK_ORDERING=y
 CONFIG_XPS=y