From: Hauke Mehrtens Date: Sat, 27 Jan 2018 22:46:50 +0000 (+0100) Subject: sunxi: Add Xunlong Orange Pi Zero Plus X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6be73c07dbd69d49493d69bbd7978ec3d89bef56;p=librecmc%2Flibrecmc.git sunxi: Add Xunlong Orange Pi Zero Plus This is based on a patch from armbian: https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/sunxi/image/cortex-a53.mk b/target/linux/sunxi/image/cortex-a53.mk index eb31aa8d4c..cd103d47d0 100644 --- a/target/linux/sunxi/image/cortex-a53.mk +++ b/target/linux/sunxi/image/cortex-a53.mk @@ -27,4 +27,15 @@ endef TARGET_DEVICES += sun50i-a64-pine64-plus + +define Device/sun50i-h5-orangepi-zero-plus + DEVICE_TITLE:=Xunlong Orange Pi Zero Plus + SUPPORTED_DEVICES:=xunlong,orangepi-zero-plus + SUNXI_DTS:=allwinner/sun50i-h5-orangepi-zero-plus + KERNEL_NAME := Image + KERNEL := kernel-bin +endef + +TARGET_DEVICES += sun50i-h5-orangepi-zero-plus + endif diff --git a/target/linux/sunxi/patches-4.14/220-ARM-dts-orange-pi-zero-plus.patch b/target/linux/sunxi/patches-4.14/220-ARM-dts-orange-pi-zero-plus.patch new file mode 100644 index 0000000000..d4f987eb65 --- /dev/null +++ b/target/linux/sunxi/patches-4.14/220-ARM-dts-orange-pi-zero-plus.patch @@ -0,0 +1,193 @@ +--- a/arch/arm64/boot/dts/allwinner/Makefile ++++ b/arch/arm64/boot/dts/allwinner/Makefile +@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-s + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb ++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb + +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts +@@ -0,0 +1,180 @@ ++/* ++ * Copyright (C) 2016 ARM Ltd. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "sun50i-h5.dtsi" ++ ++#include ++#include ++#include ++ ++/ { ++ model = "Xunlong Orange Pi Zero Plus"; ++ compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5"; ++ ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ aliases { ++ ethernet0 = &emac; ++ ethernet1 = &rtl8189ftv; ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr { ++ label = "orangepi:green:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ ++ status { ++ label = "orangepi:red:status"; ++ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ reg_usb0_vbus: usb0-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb0-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ enable-active-high; ++ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ ++ status = "okay"; ++ }; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ status = "okay"; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ /* ++ * Explicitly define the sdio device, so that we can add an ethernet ++ * alias for it (which e.g. makes u-boot set a mac-address). ++ */ ++ rtl8189ftv: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ /* USB Type-A ports' VBUS is always on */ ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++ status = "okay"; ++};