From: Richard Levitte Date: Wed, 23 Mar 2016 22:08:18 +0000 (+0100) Subject: VMS: Rethink the staging directory X-Git-Tag: OpenSSL_1_1_0-pre5~234 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6bd1ef90b212554eee3163bd48e5caa4b1f06e92;p=oweals%2Fopenssl.git VMS: Rethink the staging directory On Windows and Unix, the staging directory $(DESTDIR) can simply be prepended to the installation directory. An attempt was made to do something similar on VMS, but that ended up being a half measure solution. Instead of that, simply use the staging directory as a prefix under which [.OPENSSL-INSTALL] and [.OPENSSL-COMMON] will hold the two directory trees that should end up in the directories indicated by --prefix and --openssldir, and finish the installation with appropriate instructions on what to do next. Reviewed-by: Rich Salz --- diff --git a/Configurations/descrip.mms.tmpl b/Configurations/descrip.mms.tmpl index 7bb7cdfde4..bf1e05661d 100644 --- a/Configurations/descrip.mms.tmpl +++ b/Configurations/descrip.mms.tmpl @@ -165,26 +165,27 @@ NODEBUG=@ $(NODEBUG) DEFINE openssl 'openssl_inc1','openssl_inc2' $(NODEBUG) DEFINE internal 'internal_inc1','internal_inc2','internal_inc3' $(NODEBUG) staging_dir = "$(DESTDIR)" + $(NODEBUG) staging_instdir = "" + $(NODEBUG) staging_datadir = "" $(NODEBUG) IF staging_dir .NES. "" THEN - - staging_dir = F$PARSE("A.;",staging_dir,"[]",,"SYNTAX_ONLY") - "A.;" + staging_instdir = F$PARSE("A.;",staging_dir,"[]",,"SYNTAX_ONLY") + $(NODEBUG) IF staging_instdir - "]A.;" .NES. staging_instdir THEN - + staging_instdir = staging_instdir - "]A.;" + ".OPENSSL-INSTALL]" + $(NODEBUG) IF staging_instdir - "A.;" .NES. staging_instdir THEN - + staging_instdir = staging_instdir - "A.;" + "[OPENSSL-INSTALL]" + $(NODEBUG) IF staging_dir .NES. "" THEN - + staging_datadir = F$PARSE("A.;",staging_dir,"[]",,"SYNTAX_ONLY") + $(NODEBUG) IF staging_datadir - "]A.;" .NES. staging_datadir THEN - + staging_datadir = staging_datadir - "]A.;" + ".OPENSSL-COMMON]" + $(NODEBUG) IF staging_datadir - "A.;" .NES. staging_datadir THEN - + staging_datadir = staging_datadir - "A.;" + "[OPENSSL-COMMON]" $(NODEBUG) ! $(NODEBUG) ! Installation logical names $(NODEBUG) ! - $(NODEBUG) installtop_dev = F$PARSE(staging_dir,"$(INSTALLTOP)",,"DEVICE","SYNTAX_ONLY") - $(NODEBUG) ! Because there are no routines to merge directories, we have to - $(NODEBUG) ! do it ourselves - $(NODEBUG) IF staging_dir .NES. "" THEN - - staging_dir = F$PARSE(staging_dir,"[000000]",,"DIRECTORY","SYNTAX_ONLY") - $(NODEBUG) installtop_dir = F$PARSE("$(INSTALLTOP)","[000000]",,"DIRECTORY","SYNTAX_ONLY") - $(NODEBUG) IF staging_dir .NES. "" .AND. staging_dir .NES. "[000000]" THEN - - installtop_dir = staging_dir - "]" + "." + (installtop_dir - "[") - $(NODEBUG) installtop_dir = installtop_dir - "]" + ".]" - $(NODEBUG) DEFINE ossl_installroot 'installtop_dev''installtop_dir' - $(NODEBUG) ! - $(NODEBUG) datatop = F$PARSE("$(OPENSSLDIR)","[000000]A.;",,,"SYNTAX_ONLY") - - - "]A.;" + ".]" - $(NODEBUG) IF "$(DESTDIR)" .EQS. "" THEN - - DEFINE ossl_dataroot 'datatop' + $(NODEBUG) installtop = F$PARSE(staging_instdir,"$(INSTALLTOP)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]" + $(NODEBUG) datatop = F$PARSE(staging_datadir,"$(OPENSSLDIR)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]" + $(NODEBUG) DEFINE ossl_installroot 'installtop' + $(NODEBUG) DEFINE ossl_dataroot 'datatop' $(NODEBUG) ! $(NODEBUG) ! Figure out the architecture $(NODEBUG) ! @@ -197,7 +198,7 @@ NODEBUG=@ .LAST : $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEASSIGN ".uc($_) } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "!" -} - $(NODEBUG) IF "$(DESTDIR)" .EQS. "" THEN DEASSIGN ossl_dataroot + $(NODEBUG) DEASSIGN ossl_dataroot $(NODEBUG) DEASSIGN ossl_installroot $(NODEBUG) DEASSIGN internal $(NODEBUG) DEASSIGN openssl @@ -248,10 +249,24 @@ install : install_sw install_docs @ WRITE SYS$OUTPUT "" @ WRITE SYS$OUTPUT "######################################################################" @ WRITE SYS$OUTPUT "" - @ WRITE SYS$OUTPUT "Installation complete" - @ WRITE SYS$OUTPUT "" @ IF "$(DESTDIR)" .EQS. "" THEN - - PIPE ( WRITE SYS$OUTPUT "Run @$(INSTALLTOP)openssl_startup to set up logical names" ; - + PIPE ( WRITE SYS$OUTPUT "Installation complete" ; - + WRITE SYS$OUTPUT "" ; - + WRITE SYS$OUTPUT "Run @$(INSTALLTOP)openssl_startup to set up logical names" ; - + WRITE SYS$OUTPUT "then run @$(INSTALLTOP)openssl_setup to define commands" ; - + WRITE SYS$OUTPUT "" ) + @ IF "$(DESTDIR)" .NES. "" THEN - + PIPE ( WRITE SYS$OUTPUT "Staging installation complete" ; - + WRITE SYS$OUTPUT "" ; - + WRITE SYS$OUTPUT "Finish or package in such a way that the contents of the directory tree" ; - + WRITE SYS$OUTPUT staging_instdir ; - + WRITE SYS$OUTPUT "ends up in $(INSTALLTOP)," ; - + WRITE SYS$OUTPUT "and that the contents of the contents of the directory tree" ; - + WRITE SYS$OUTPUT staging_datadir ; - + WRITE SYS$OUTPUT "ends up in $(OPENSSLDIR)" ; - + WRITE SYS$OUTPUT "" ; - + WRITE SYS$OUTPUT "When in its final destination," ; - + WRITE SYS$OUTPUT "Run @$(INSTALLTOP)openssl_startup to set up logical names" ; - WRITE SYS$OUTPUT "then run @$(INSTALLTOP)openssl_setup to define commands" ; - WRITE SYS$OUTPUT "" ) @@ -333,12 +348,10 @@ install_engines : check_INSTALLTOP install_config : [.VMS]openssl_startup.com [.VMS]openssl_shutdown.com - check_INSTALLTOP - IF "$(DESTDIR)" .EQS. "" THEN - - IF F$SEARCH("OSSL_DATAROOT:[000000]CERTS.DIR;1") .EQS. "" THEN - + IF F$SEARCH("OSSL_DATAROOT:[000000]CERTS.DIR;1") .EQS. "" THEN - CREATE/DIR/PROT=(S:RWED,O:RWE,G:RE,W:RE) OSSL_DATAROOT:[CERTS] - IF "$(DESTDIR)" .EQS. "" THEN - - IF F$SEARCH("OSSL_DATAROOT:[000000]PRIVATE.DIR;1") .EQS. "" THEN - - CREATE/DIR/PROT=(S:RWED,O:RWE,G:,W:) OSSL_DATAROOT:[PRIVATE] + IF F$SEARCH("OSSL_DATAROOT:[000000]PRIVATE.DIR;1") .EQS. "" THEN - + CREATE/DIR/PROT=(S:RWED,O:RWE,G,W) OSSL_DATAROOT:[PRIVATE] CREATE/DIR ossl_installroot:[SYS$STARTUP] COPY/PROT=W:RE - [.VMS]openssl_startup.com,openssl_shutdown.com -