From: Jagan Teki Date: Tue, 19 Nov 2019 08:26:20 +0000 (+0530) Subject: usb: dwc3: Add phy interface for dwc3_uboot X-Git-Tag: v2020.01-rc4~11^2~5 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6b7ebff00190649d2136b34f6feebc0dbe85bfdc;p=oweals%2Fu-boot.git usb: dwc3: Add phy interface for dwc3_uboot U-Boot has two different variants of dwc3 initializations, - with dm variant gadget, so the respective dm driver would call the dwc3_init in core. - with non-dm variant gadget, so the usage board file would call dwc3_uboot_init in core. The driver probe would handle all respective gadget properties including phy interface via phy_type property and then trigger dwc3_init for dm-variant gadgets. So, to support the phy interface for non-dm variant gadgets, the better option is dwc3_uboot_init since there is no dedicated controller for non-dm variant gadgets. This patch support for adding phy interface like 8/16-bit UTMI+ code for dwc3_uboot. This change used Linux phy.h enum list, to make proper code compatibility. Cc: Marek Vasut Tested-by: Levin Du Signed-off-by: Jagan Teki Reviewed-by: Marek Vasut Reviewed-by: Kever Yang --- diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 23af60c98d..f779562de2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -613,6 +613,31 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) dwc3_gadget_run(dwc); } +static void dwc3_uboot_hsphy_mode(struct dwc3_device *dwc3_dev, + struct dwc3 *dwc) +{ + enum usb_phy_interface hsphy_mode = dwc3_dev->hsphy_mode; + u32 reg; + + /* Set dwc3 usb2 phy config */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_PHYIF; + reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK; + + switch (hsphy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT; + break; + case USBPHY_INTERFACE_MODE_UTMIW: + reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT; + break; + default: + break; + } + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + #define DWC3_ALIGN_MASK (16 - 1) /** @@ -721,6 +746,8 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev) goto err0; } + dwc3_uboot_hsphy_mode(dwc3_dev, dwc); + ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index be9672266a..bff53e072b 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -162,6 +162,18 @@ /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) +#define DWC3_GUSB2PHYCFG_PHYIF BIT(3) + +/* Global USB2 PHY Configuration Mask */ +#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK (0xf << 10) + +/* Global USB2 PHY Configuration Offset */ +#define DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET 10 + +#define DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT (0x5 << \ + DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET) +#define DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT (0x9 << \ + DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET) /* Global USB3 PIPE Control Register */ #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h index 9941cc37a3..3c9e204cf0 100644 --- a/include/dwc3-uboot.h +++ b/include/dwc3-uboot.h @@ -10,10 +10,12 @@ #define __DWC3_UBOOT_H_ #include +#include struct dwc3_device { unsigned long base; enum usb_dr_mode dr_mode; + enum usb_phy_interface hsphy_mode; u32 maximum_speed; unsigned tx_fifo_resize:1; unsigned has_lpm_erratum; diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h new file mode 100644 index 0000000000..158ca9cd85 --- /dev/null +++ b/include/linux/usb/phy.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * USB PHY defines + * + * These APIs may be used between USB controllers. USB device drivers + * (for either host or peripheral roles) don't use these calls; they + * continue to use just usb_device and usb_gadget. + */ + +#ifndef __LINUX_USB_PHY_H +#define __LINUX_USB_PHY_H + +enum usb_phy_interface { + USBPHY_INTERFACE_MODE_UNKNOWN, + USBPHY_INTERFACE_MODE_UTMI, + USBPHY_INTERFACE_MODE_UTMIW, +}; + +#endif /* __LINUX_USB_PHY_H */