From: Ben Warren Date: Fri, 29 Aug 2008 06:58:30 +0000 (-0700) Subject: Move MPC512x_FEC driver to drivers/net X-Git-Tag: v2008.10-rc1~68^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6b5049d056cd8ef72d1f2f461ceb2d033d93f759;p=oweals%2Fu-boot.git Move MPC512x_FEC driver to drivers/net Signed-off-by: Ben Warren --- diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile index 8ba8ae875d..e8f1060748 100644 --- a/cpu/mpc512x/Makefile +++ b/cpu/mpc512x/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc512x/fec.c b/cpu/mpc512x/fec.c deleted file mode 100644 index e9df7de5e7..0000000000 --- a/cpu/mpc512x/fec.c +++ /dev/null @@ -1,794 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Derived from the MPC8xx FEC driver. - * Adapted for MPC512x by Grzegorz Bernacki - */ - -#include -#include -#include -#include -#include -#include "fec.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define DEBUG 0 - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ - defined(CONFIG_MPC512x_FEC) - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#if (DEBUG & 0x40) -static uint32 local_crc32(char *string, unsigned int crc_value, int len); -#endif - -int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); -int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); -int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); - -static uchar rx_buff[FEC_BUFFER_SIZE]; -static int rx_buff_idx = 0; - -/********************************************************************/ -#if (DEBUG & 0x2) -static void mpc512x_fec_phydump (char *devname) -{ - uint16 phyStatus, i; - uint8 phyAddr = CONFIG_PHY_ADDR; - uint8 reg_mask[] = { - /* regs to print: 0...8, 21,27,31 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, - }; - - for (i = 0; i < 32; i++) { - if (reg_mask[i]) { - miiphy_read (devname, phyAddr, i, &phyStatus); - printf ("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } -} -#endif - -/********************************************************************/ -static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) -{ - int ix; - - /* - * Receive BDs init - */ - for (ix = 0; ix < FEC_RBD_NUM; ix++) { - fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix]; - fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; - fec->bdBase->rbd[ix].dataLength = 0; - } - - /* - * have the last RBD to close the ring - */ - fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP; - fec->rbdIndex = 0; - - /* - * Trasmit BDs init - */ - for (ix = 0; ix < FEC_TBD_NUM; ix++) { - fec->bdBase->tbd[ix].status = 0; - } - - /* - * Have the last TBD to close the ring - */ - fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP; - - /* - * Initialize some indices - */ - fec->tbdIndex = 0; - fec->usedTbdIndex = 0; - fec->cleanTbdNum = FEC_TBD_NUM; - - return 0; -} - -/********************************************************************/ -static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd) -{ - /* - * Reset buffer descriptor as empty - */ - if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) - pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); - else - pRbd->status = FEC_RBD_EMPTY; - - pRbd->dataLength = 0; - - /* - * Increment BD count - */ - fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; - - /* - * Now, we have an empty RxBD, notify FEC - */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ -} - -/********************************************************************/ -static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) -{ - volatile FEC_TBD *pUsedTbd; - -#if (DEBUG & 0x1) - printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", - fec->cleanTbdNum, fec->usedTbdIndex); -#endif - - /* - * process all the consumed TBDs - */ - while (fec->cleanTbdNum < FEC_TBD_NUM) { - pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex]; - if (pUsedTbd->status & FEC_TBD_READY) { -#if (DEBUG & 0x20) - printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex); -#endif - return; - } - - /* - * clean this buffer descriptor - */ - if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) - pUsedTbd->status = FEC_TBD_WRAP; - else - pUsedTbd->status = 0; - - /* - * update some indeces for a correct handling of the TBD ring - */ - fec->cleanTbdNum++; - fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; - } -} - -/********************************************************************/ -static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) -{ - uint8 currByte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - uint32 crc = 0xffffffff; /* initial value */ - - /* - * The algorithm used is the following: - * we loop on each of the six bytes of the provided address, - * and we compute the CRC by left-shifting the previous - * value by one position, so that each bit in the current - * byte of the address may contribute the calculation. If - * the latter and the MSB in the CRC are different, then - * the CRC value so computed is also ex-ored with the - * "polynomium generator". The current byte of the address - * is also shifted right by one bit at each iteration. - * This is because the CRC generatore in hardware is implemented - * as a shift-register with as many ex-ores as the radixes - * in the polynomium. This suggests that we represent the - * polynomiumm itself as a 32-bit constant. - */ - for (byte = 0; byte < 6; byte++) { - currByte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((currByte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - currByte >>= 1; - } - } - - crc = crc >> 26; - - /* - * Set individual hash table register - */ - if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; - } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); - } - - /* - * Set physical address - */ - fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; -} - -/********************************************************************/ -static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init... Begin\n"); -#endif - - /* Set interrupt mask register */ - fec->eth->imask = 0x00000000; - - /* Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; - - /* Set transmit fifo watermark register(X_WMRK), default = 64 */ - fec->eth->x_wmrk = 0x0; - - /* Set Opcode/Pause Duration Register */ - fec->eth->op_pause = 0x00010020; - - /* Frame length=1522; MII mode */ - fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24; - - /* Half-duplex, heartbeat disabled */ - fec->eth->x_cntrl = 0x00000000; - - /* Enable MIB counters */ - fec->eth->mib_control = 0x0; - - /* Setup recv fifo start and buff size */ - fec->eth->r_fstart = 0x500; - fec->eth->r_buff_size = FEC_BUFFER_SIZE; - - /* Setup BD base addresses */ - fec->eth->r_des_start = (uint32)fec->bdBase->rbd; - fec->eth->x_des_start = (uint32)fec->bdBase->tbd; - - /* DMA Control */ - fec->eth->dma_control = 0xc0000000; - - /* Enable FEC */ - fec->eth->ecntrl |= 0x00000006; - - /* Initilize addresses and status words of BDs */ - mpc512x_fec_bd_init (fec); - - /* Descriptor polling active */ - fec->eth->r_des_active = 0x01000000; - -#if (DEBUG & 0x1) - printf("mpc512x_fec_init... Done \n"); -#endif - return 1; -} - -/********************************************************************/ -int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ - int timeout = 1; - uint16 phyStatus; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init_phy... Begin\n"); -#endif - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1; - - /* - * Reset PHY, then delay 300ns - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x8000); - udelay (1000); - - if (fec->xcv_type == MII10) { - /* - * Force 10Base-T, FDX operation - */ -#if (DEBUG & 0x2) - printf ("Forcing 10 Mbps ethernet link... "); -#endif - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); - - miiphy_write (dev->name, phyAddr, 0x0, 0x0180); - - timeout = 20; - do { /* wait for link status to go down */ - udelay (10000); - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf ("hmmm, should not have waited..."); -#endif - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf ("="); -#endif - } while ((phyStatus & 0x0004)); /* !link up */ - - timeout = 1000; - do { /* wait for link status to come back up */ - udelay (10000); - if ((timeout--) == 0) { - printf ("failed. Link is down.\n"); - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf ("+"); -#endif - } while (!(phyStatus & 0x0004)); /* !link up */ - -#if (DEBUG & 0x2) - printf ("done.\n"); -#endif - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); - - /* - * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x1200); - - /* - * Wait for AN completion - */ - timeout = 50000; - do { - udelay (1000); - - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf ("PHY auto neg 0 failed...\n"); -#endif - return -1; - } - - if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) { -#if (DEBUG & 0x2) - printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); -#endif - return -1; - } - } while (!(phyStatus & 0x0004)); - -#if (DEBUG & 0x2) - printf ("PHY auto neg complete! \n"); -#endif - } - } - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc512x_fec_phydump (dev->name); -#endif - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init_phy... Done \n"); -#endif - return 1; -} - -/********************************************************************/ -static void mpc512x_fec_halt (struct eth_device *dev) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - int counter = 0xffff; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc512x_fec_phydump (dev->name); -#endif - - /* - * mask FEC chip interrupts - */ - fec->eth->imask = 0; - - /* - * issue graceful stop command to the FEC transmitter if necessary - */ - fec->eth->x_cntrl |= 0x00000001; - - /* - * wait for graceful stop to register - */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; - - /* - * Disable the Ethernet Controller - */ - fec->eth->ecntrl &= 0xfffffffd; - - /* - * Issue a reset command to the FEC chip - */ - fec->eth->ecntrl |= 0x1; - - /* - * wait at least 16 clock cycles - */ - udelay (10); -#if (DEBUG & 0x3) - printf ("Ethernet task stopped\n"); -#endif -} - -/********************************************************************/ - -static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, - int data_length) -{ - /* - * This routine transmits one frame. This routine only accepts - * 6-byte Ethernet addresses. - */ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - volatile FEC_TBD *pTbd; - -#if (DEBUG & 0x20) - printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status); -#endif - - /* - * Clear Tx BD ring at first - */ - mpc512x_fec_tbd_scrub (fec); - - /* - * Check for valid length of data. - */ - if ((data_length > 1500) || (data_length <= 0)) { - return -1; - } - - /* - * Check the number of vacant TxBDs. - */ - if (fec->cleanTbdNum < 1) { -#if (DEBUG & 0x20) - printf ("No available TxBDs ...\n"); -#endif - return -1; - } - - /* - * Get the first TxBD to send the mac header - */ - pTbd = &fec->bdBase->tbd[fec->tbdIndex]; - pTbd->dataLength = data_length; - pTbd->dataPointer = (uint32)eth_data; - pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; - fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; - - /* Activate transmit Buffer Descriptor polling */ - fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */ - -#if (DEBUG & 0x8) - printf ( "+" ); -#endif - - fec->cleanTbdNum -= 1; - - /* - * wait until frame is sent . - */ - while (pTbd->status & FEC_TBD_READY) { - udelay (10); -#if (DEBUG & 0x8) - printf ("TDB status = %04x\n", pTbd->status); -#endif - } - - return 0; -} - - -/********************************************************************/ -static int mpc512x_fec_recv (struct eth_device *dev) -{ - /* - * This command pulls one frame from the card - */ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex]; - unsigned long ievent; - int frame_length = 0; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex); -#endif -#if (DEBUG & 0x8) - printf( "-" ); -#endif - - /* - * Check if any critical events have happened - */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; - if (ievent & 0x20060000) { - /* BABT, Rx/Tx FIFO errors */ - mpc512x_fec_halt (dev); - mpc512x_fec_init (dev, NULL); - return 0; - } - if (ievent & 0x80000000) { - /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; - } - if (ievent & 0x10000000) { - /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { - mpc512x_fec_halt (dev); - fec->eth->x_cntrl &= ~0x00000001; - mpc512x_fec_init (dev, NULL); - } - } - - if (!(pRbd->status & FEC_RBD_EMPTY)) { - if (!(pRbd->status & FEC_RBD_ERR) && - ((pRbd->dataLength - 4) > 14)) { - - /* - * Get buffer size - */ - if (pRbd->status & FEC_RBD_LAST) - frame_length = pRbd->dataLength - 4; - else - frame_length = pRbd->dataLength; -#if (DEBUG & 0x20) - { - int i; - printf ("recv data length 0x%08x data hdr: ", - pRbd->dataLength); - for (i = 0; i < 14; i++) - printf ("%x ", *((uint8*)pRbd->dataPointer + i)); - printf("\n"); - } -#endif - /* - * Fill the buffer and pass it to upper layers - */ - memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer, - frame_length - rx_buff_idx); - rx_buff_idx = frame_length; - - if (pRbd->status & FEC_RBD_LAST) { - NetReceive ((uchar*)rx_buff, frame_length); - rx_buff_idx = 0; - } - } - - /* - * Reset buffer descriptor as empty - */ - mpc512x_fec_rbd_clean (fec, pRbd); - } - - /* Try to fill Buffer Descriptors */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ - return frame_length; -} - -/********************************************************************/ -int mpc512x_fec_initialize (bd_t * bis) -{ - mpc512x_fec_priv *fec; - struct eth_device *dev; - int i; - char *tmp, *end, env_enetaddr[6]; - void * bd; - - fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); - dev = (struct eth_device *) malloc (sizeof(*dev)); - memset (dev, 0, sizeof *dev); - - fec->eth = (ethernet_regs *) MPC512X_FEC; - -# ifndef CONFIG_FEC_10MBIT - fec->xcv_type = MII100; -# else - fec->xcv_type = MII10; -# endif - dev->priv = (void *)fec; - dev->iobase = MPC512X_FEC; - dev->init = mpc512x_fec_init; - dev->halt = mpc512x_fec_halt; - dev->send = mpc512x_fec_send; - dev->recv = mpc512x_fec_recv; - - sprintf (dev->name, "FEC ETHERNET"); - eth_register (dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register (dev->name, - fec512x_miiphy_read, fec512x_miiphy_write); -#endif - - /* Clean up space FEC's MIB and FIFO RAM ...*/ - memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400); - - /* - * Malloc space for BDs (must be quad word-aligned) - * this pointer is lost, so cannot be freed - */ - bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); - fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0); - memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Try to set the mac address now. The fec mac address is - * a garbage after reset. When not using fec for booting - * the Linux fec driver will try to work with this garbage. - */ - tmp = getenv ("ethaddr"); - if (tmp) { - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; - } - mpc512x_fec_set_hwaddr (fec, env_enetaddr); - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; - } - - mpc512x_fec_init_phy (dev, bis); - - return 1; -} - -/* MII-interface related functions */ -/********************************************************************/ -int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) -{ - ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - /* - * reading from any PHY's register is done by properly - * programming the FEC's MII data register. - */ - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); - - /* - * wait for the related interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Read MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear mii interrupt bit - */ - eth->ievent = 0x00800000; - - /* - * it's now safe to read the PHY's register - */ - *retVal = (uint16) eth->mii_data; - - return 0; -} - -/********************************************************************/ -int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) -{ - ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); - - /* - * wait for the MII interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Write MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear MII interrupt bit - */ - eth->ievent = 0x00800000; - - return 0; -} - -#if (DEBUG & 0x40) -static uint32 local_crc32 (char *string, unsigned int crc_value, int len) -{ - int i; - char c; - unsigned int crc, count; - - /* - * crc32 algorithm - */ - /* - * crc = 0xffffffff; * The initialized value should be 0xffffffff - */ - crc = crc_value; - - for (i = len; --i >= 0;) { - c = *string++; - for (count = 0; count < 8; count++) { - if ((c & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - c >>= 1; - } - } - - /* - * In big endian system, do byte swaping for crc value - */ - /**/ return crc; -} -#endif /* DEBUG */ - -#endif /* CONFIG_MPC512x_FEC */ diff --git a/cpu/mpc512x/fec.h b/cpu/mpc512x/fec.h deleted file mode 100644 index 9c38502870..0000000000 --- a/cpu/mpc512x/fec.h +++ /dev/null @@ -1,227 +0,0 @@ -/* - * (C) Copyright 2003 - 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Derived from the MPC8xx driver's header file. - */ - -#ifndef __MPC512X_FEC_H -#define __MPC512X_FEC_H - -#include -#include - -typedef unsigned long uint32; -typedef unsigned short uint16; -typedef unsigned char uint8; - -typedef struct ethernet_register_set { - -/* [10:2]addr = 00 */ - -/* Control and status Registers (offset 000-1FF) */ - - volatile uint32 fec_id; /* MBAR_ETH + 0x000 */ - volatile uint32 ievent; /* MBAR_ETH + 0x004 */ - volatile uint32 imask; /* MBAR_ETH + 0x008 */ - - volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */ - volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */ - volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */ - - volatile uint32 RES1[3]; /* MBAR_ETH + 0x018-020 */ - volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */ - - volatile uint32 RES2[6]; /* MBAR_ETH + 0x028-03C */ - volatile uint32 mii_data; /* MBAR_ETH + 0x040 */ - volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */ - - volatile uint32 RES3[7]; /* MBAR_ETH + 0x048-060 */ - volatile uint32 mib_control; /* MBAR_ETH + 0x064 */ - - volatile uint32 RES4[7]; /* MBAR_ETH + 0x068-80 */ - volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */ - volatile uint32 r_hash; /* MBAR_ETH + 0x088 */ - - volatile uint32 RES5[14]; /* MBAR_ETH + 0x08c-0C0 */ - volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */ - - volatile uint32 RES6[7]; /* MBAR_ETH + 0x0C8-0E0 */ - volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */ - volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */ - volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */ - - volatile uint32 RES7[10]; /* MBAR_ETH + 0x0F0-114 */ - volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */ - volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */ - volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */ - volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */ - - volatile uint32 RES8[6]; /* MBAR_ETH + 0x128-13C */ - volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */ - volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */ - volatile uint32 RES9[1]; /* MBAR_ETH + 0x148 */ - volatile uint32 r_bound; /* MBAR_ETH + 0x14C */ - volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */ - - volatile uint32 RES10[11]; /* MBAR_ETH + 0x154-17C */ - volatile uint32 r_des_start; /* MBAR_ETH + 0x180 */ - volatile uint32 x_des_start; /* MBAR_ETH + 0x184 */ - volatile uint32 r_buff_size; /* MBAR_ETH + 0x188 */ - volatile uint32 RES11[26]; /* MBAR_ETH + 0x18C-1F0 */ - volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */ - volatile uint32 RES12[2]; /* MBAR_ETH + 0x1F8-1FC */ - -/* MIB COUNTERS (Offset 200-2FF) */ - - volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */ - volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */ - volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ - volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ - volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */ - volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */ - volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */ - volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */ - volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */ - volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */ - volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */ - volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */ - volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */ - volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */ - volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ - volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */ - volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ - volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */ - volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */ - volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ - volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */ - volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */ - volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */ - volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */ - volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */ - volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */ - volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */ - volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */ - volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */ - volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ - - volatile uint32 RES13[2]; /* MBAR_ETH + 0x278-27C */ - volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */ - volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */ - volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ - volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ - volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */ - volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */ - volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */ - volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */ - volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */ - - volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ - - volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */ - volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ - volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ - volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ - volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ - volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */ - volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ - volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */ - volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */ - volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ - volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */ - volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */ - volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */ - volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */ - volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ - - volatile uint32 RES14[6]; /* MBAR_ETH + 0x2E4-2FC */ - - volatile uint32 RES15[64]; /* MBAR_ETH + 0x300-3FF */ -} ethernet_regs; - -/* Receive & Transmit Buffer Descriptor definitions */ -typedef struct BufferDescriptor { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_RBD; - -typedef struct { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_TBD; - -/* private structure */ -typedef enum { - SEVENWIRE, /* 7-wire */ - MII10, /* MII 10Mbps */ - MII100 /* MII 100Mbps */ -} xceiver_type; - -/* BD Numer definitions */ -#define FEC_TBD_NUM 48 /* The user can adjust this value */ -#define FEC_RBD_NUM 32 /* The user can adjust this value */ - -/* packet size limit */ -#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */ - -/* Buffer size must be evenly divisible by 16 */ -#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf)) - -typedef struct { - uint8 frame[FEC_BUFFER_SIZE]; -} mpc512x_frame; - -typedef struct { - FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */ - FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */ - mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */ -} mpc512x_buff_descs; - -typedef struct { - ethernet_regs *eth; - xceiver_type xcv_type; /* transceiver type */ - mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */ - uint16 rbdIndex; /* next receive BD to read */ - uint16 tbdIndex; /* next transmit BD to send */ - uint16 usedTbdIndex; /* next transmit BD to clean */ - uint16 cleanTbdNum; /* the number of available transmit BDs */ -} mpc512x_fec_priv; - -/* RBD bits definitions */ -#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ -#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ -#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ -#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ -#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ -#define FEC_RBD_LG 0x0020 /* Frame length violation */ -#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ -#define FEC_RBD_SH 0x0008 /* Short frame */ -#define FEC_RBD_CR 0x0004 /* CRC error */ -#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ -#define FEC_RBD_TR 0x0001 /* Frame is truncated */ -#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ - FEC_RBD_OV | FEC_RBD_TR) - -/* TBD bits definitions */ -#define FEC_TBD_READY 0x8000 /* Buffer is ready */ -#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ -#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ -#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ - -/* MII-related definitios */ -#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ -#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ -#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ -#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ -#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ -#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ -#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ - -#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ -#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ - -#endif /* __MPC512X_FEC_H */ diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c68d3e7a20..a084000a93 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -42,6 +42,7 @@ COBJS-$(CONFIG_DRIVER_LAN91C96) += lan91c96.o COBJS-$(CONFIG_MACB) += macb.o COBJS-$(CONFIG_MCFFEC) += mcffec.o COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o +COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o COBJS-$(CONFIG_NATSEMI) += natsemi.o ifeq ($(CONFIG_DRIVER_NE2000),y) COBJS-y += ne2000.o diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c new file mode 100644 index 0000000000..7caeeda653 --- /dev/null +++ b/drivers/net/mpc512x_fec.c @@ -0,0 +1,794 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Derived from the MPC8xx FEC driver. + * Adapted for MPC512x by Grzegorz Bernacki + */ + +#include +#include +#include +#include +#include +#include "mpc512x_fec.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define DEBUG 0 + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ + defined(CONFIG_MPC512x_FEC) + +#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) +#error "CONFIG_MII has to be defined!" +#endif + +#if (DEBUG & 0x40) +static uint32 local_crc32(char *string, unsigned int crc_value, int len); +#endif + +int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); +int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); +int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); + +static uchar rx_buff[FEC_BUFFER_SIZE]; +static int rx_buff_idx = 0; + +/********************************************************************/ +#if (DEBUG & 0x2) +static void mpc512x_fec_phydump (char *devname) +{ + uint16 phyStatus, i; + uint8 phyAddr = CONFIG_PHY_ADDR; + uint8 reg_mask[] = { + /* regs to print: 0...8, 21,27,31 */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, + }; + + for (i = 0; i < 32; i++) { + if (reg_mask[i]) { + miiphy_read (devname, phyAddr, i, &phyStatus); + printf ("Mii reg %d: 0x%04x\n", i, phyStatus); + } + } +} +#endif + +/********************************************************************/ +static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) +{ + int ix; + + /* + * Receive BDs init + */ + for (ix = 0; ix < FEC_RBD_NUM; ix++) { + fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix]; + fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; + fec->bdBase->rbd[ix].dataLength = 0; + } + + /* + * have the last RBD to close the ring + */ + fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP; + fec->rbdIndex = 0; + + /* + * Trasmit BDs init + */ + for (ix = 0; ix < FEC_TBD_NUM; ix++) { + fec->bdBase->tbd[ix].status = 0; + } + + /* + * Have the last TBD to close the ring + */ + fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP; + + /* + * Initialize some indices + */ + fec->tbdIndex = 0; + fec->usedTbdIndex = 0; + fec->cleanTbdNum = FEC_TBD_NUM; + + return 0; +} + +/********************************************************************/ +static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd) +{ + /* + * Reset buffer descriptor as empty + */ + if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) + pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); + else + pRbd->status = FEC_RBD_EMPTY; + + pRbd->dataLength = 0; + + /* + * Increment BD count + */ + fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; + + /* + * Now, we have an empty RxBD, notify FEC + */ + fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ +} + +/********************************************************************/ +static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) +{ + volatile FEC_TBD *pUsedTbd; + +#if (DEBUG & 0x1) + printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", + fec->cleanTbdNum, fec->usedTbdIndex); +#endif + + /* + * process all the consumed TBDs + */ + while (fec->cleanTbdNum < FEC_TBD_NUM) { + pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex]; + if (pUsedTbd->status & FEC_TBD_READY) { +#if (DEBUG & 0x20) + printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex); +#endif + return; + } + + /* + * clean this buffer descriptor + */ + if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) + pUsedTbd->status = FEC_TBD_WRAP; + else + pUsedTbd->status = 0; + + /* + * update some indeces for a correct handling of the TBD ring + */ + fec->cleanTbdNum++; + fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; + } +} + +/********************************************************************/ +static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) +{ + uint8 currByte; /* byte for which to compute the CRC */ + int byte; /* loop - counter */ + int bit; /* loop - counter */ + uint32 crc = 0xffffffff; /* initial value */ + + /* + * The algorithm used is the following: + * we loop on each of the six bytes of the provided address, + * and we compute the CRC by left-shifting the previous + * value by one position, so that each bit in the current + * byte of the address may contribute the calculation. If + * the latter and the MSB in the CRC are different, then + * the CRC value so computed is also ex-ored with the + * "polynomium generator". The current byte of the address + * is also shifted right by one bit at each iteration. + * This is because the CRC generatore in hardware is implemented + * as a shift-register with as many ex-ores as the radixes + * in the polynomium. This suggests that we represent the + * polynomiumm itself as a 32-bit constant. + */ + for (byte = 0; byte < 6; byte++) { + currByte = mac[byte]; + for (bit = 0; bit < 8; bit++) { + if ((currByte & 0x01) ^ (crc & 0x01)) { + crc >>= 1; + crc = crc ^ 0xedb88320; + } else { + crc >>= 1; + } + currByte >>= 1; + } + } + + crc = crc >> 26; + + /* + * Set individual hash table register + */ + if (crc >= 32) { + fec->eth->iaddr1 = (1 << (crc - 32)); + fec->eth->iaddr2 = 0; + } else { + fec->eth->iaddr1 = 0; + fec->eth->iaddr2 = (1 << crc); + } + + /* + * Set physical address + */ + fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; + fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; +} + +/********************************************************************/ +static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) +{ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_init... Begin\n"); +#endif + + /* Set interrupt mask register */ + fec->eth->imask = 0x00000000; + + /* Clear FEC-Lite interrupt event register(IEVENT) */ + fec->eth->ievent = 0xffffffff; + + /* Set transmit fifo watermark register(X_WMRK), default = 64 */ + fec->eth->x_wmrk = 0x0; + + /* Set Opcode/Pause Duration Register */ + fec->eth->op_pause = 0x00010020; + + /* Frame length=1522; MII mode */ + fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24; + + /* Half-duplex, heartbeat disabled */ + fec->eth->x_cntrl = 0x00000000; + + /* Enable MIB counters */ + fec->eth->mib_control = 0x0; + + /* Setup recv fifo start and buff size */ + fec->eth->r_fstart = 0x500; + fec->eth->r_buff_size = FEC_BUFFER_SIZE; + + /* Setup BD base addresses */ + fec->eth->r_des_start = (uint32)fec->bdBase->rbd; + fec->eth->x_des_start = (uint32)fec->bdBase->tbd; + + /* DMA Control */ + fec->eth->dma_control = 0xc0000000; + + /* Enable FEC */ + fec->eth->ecntrl |= 0x00000006; + + /* Initilize addresses and status words of BDs */ + mpc512x_fec_bd_init (fec); + + /* Descriptor polling active */ + fec->eth->r_des_active = 0x01000000; + +#if (DEBUG & 0x1) + printf("mpc512x_fec_init... Done \n"); +#endif + return 1; +} + +/********************************************************************/ +int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) +{ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ + int timeout = 1; + uint16 phyStatus; + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_init_phy... Begin\n"); +#endif + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + fec->eth->ievent = 0xffffffff; + + /* + * Set interrupt mask register + */ + fec->eth->imask = 0x00000000; + + if (fec->xcv_type != SEVENWIRE) { + /* + * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock + * and do not drop the Preamble. + */ + fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1; + + /* + * Reset PHY, then delay 300ns + */ + miiphy_write (dev->name, phyAddr, 0x0, 0x8000); + udelay (1000); + + if (fec->xcv_type == MII10) { + /* + * Force 10Base-T, FDX operation + */ +#if (DEBUG & 0x2) + printf ("Forcing 10 Mbps ethernet link... "); +#endif + miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); + + miiphy_write (dev->name, phyAddr, 0x0, 0x0180); + + timeout = 20; + do { /* wait for link status to go down */ + udelay (10000); + if ((timeout--) == 0) { +#if (DEBUG & 0x2) + printf ("hmmm, should not have waited..."); +#endif + break; + } + miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); +#if (DEBUG & 0x2) + printf ("="); +#endif + } while ((phyStatus & 0x0004)); /* !link up */ + + timeout = 1000; + do { /* wait for link status to come back up */ + udelay (10000); + if ((timeout--) == 0) { + printf ("failed. Link is down.\n"); + break; + } + miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); +#if (DEBUG & 0x2) + printf ("+"); +#endif + } while (!(phyStatus & 0x0004)); /* !link up */ + +#if (DEBUG & 0x2) + printf ("done.\n"); +#endif + } else { /* MII100 */ + /* + * Set the auto-negotiation advertisement register bits + */ + miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); + + /* + * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation + */ + miiphy_write (dev->name, phyAddr, 0x0, 0x1200); + + /* + * Wait for AN completion + */ + timeout = 50000; + do { + udelay (1000); + + if ((timeout--) == 0) { +#if (DEBUG & 0x2) + printf ("PHY auto neg 0 failed...\n"); +#endif + return -1; + } + + if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) { +#if (DEBUG & 0x2) + printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); +#endif + return -1; + } + } while (!(phyStatus & 0x0004)); + +#if (DEBUG & 0x2) + printf ("PHY auto neg complete! \n"); +#endif + } + } + +#if (DEBUG & 0x2) + if (fec->xcv_type != SEVENWIRE) + mpc512x_fec_phydump (dev->name); +#endif + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_init_phy... Done \n"); +#endif + return 1; +} + +/********************************************************************/ +static void mpc512x_fec_halt (struct eth_device *dev) +{ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + int counter = 0xffff; + +#if (DEBUG & 0x2) + if (fec->xcv_type != SEVENWIRE) + mpc512x_fec_phydump (dev->name); +#endif + + /* + * mask FEC chip interrupts + */ + fec->eth->imask = 0; + + /* + * issue graceful stop command to the FEC transmitter if necessary + */ + fec->eth->x_cntrl |= 0x00000001; + + /* + * wait for graceful stop to register + */ + while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; + + /* + * Disable the Ethernet Controller + */ + fec->eth->ecntrl &= 0xfffffffd; + + /* + * Issue a reset command to the FEC chip + */ + fec->eth->ecntrl |= 0x1; + + /* + * wait at least 16 clock cycles + */ + udelay (10); +#if (DEBUG & 0x3) + printf ("Ethernet task stopped\n"); +#endif +} + +/********************************************************************/ + +static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, + int data_length) +{ + /* + * This routine transmits one frame. This routine only accepts + * 6-byte Ethernet addresses. + */ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + volatile FEC_TBD *pTbd; + +#if (DEBUG & 0x20) + printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status); +#endif + + /* + * Clear Tx BD ring at first + */ + mpc512x_fec_tbd_scrub (fec); + + /* + * Check for valid length of data. + */ + if ((data_length > 1500) || (data_length <= 0)) { + return -1; + } + + /* + * Check the number of vacant TxBDs. + */ + if (fec->cleanTbdNum < 1) { +#if (DEBUG & 0x20) + printf ("No available TxBDs ...\n"); +#endif + return -1; + } + + /* + * Get the first TxBD to send the mac header + */ + pTbd = &fec->bdBase->tbd[fec->tbdIndex]; + pTbd->dataLength = data_length; + pTbd->dataPointer = (uint32)eth_data; + pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; + fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; + + /* Activate transmit Buffer Descriptor polling */ + fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */ + +#if (DEBUG & 0x8) + printf ( "+" ); +#endif + + fec->cleanTbdNum -= 1; + + /* + * wait until frame is sent . + */ + while (pTbd->status & FEC_TBD_READY) { + udelay (10); +#if (DEBUG & 0x8) + printf ("TDB status = %04x\n", pTbd->status); +#endif + } + + return 0; +} + + +/********************************************************************/ +static int mpc512x_fec_recv (struct eth_device *dev) +{ + /* + * This command pulls one frame from the card + */ + mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; + volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex]; + unsigned long ievent; + int frame_length = 0; + +#if (DEBUG & 0x1) + printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex); +#endif +#if (DEBUG & 0x8) + printf( "-" ); +#endif + + /* + * Check if any critical events have happened + */ + ievent = fec->eth->ievent; + fec->eth->ievent = ievent; + if (ievent & 0x20060000) { + /* BABT, Rx/Tx FIFO errors */ + mpc512x_fec_halt (dev); + mpc512x_fec_init (dev, NULL); + return 0; + } + if (ievent & 0x80000000) { + /* Heartbeat error */ + fec->eth->x_cntrl |= 0x00000001; + } + if (ievent & 0x10000000) { + /* Graceful stop complete */ + if (fec->eth->x_cntrl & 0x00000001) { + mpc512x_fec_halt (dev); + fec->eth->x_cntrl &= ~0x00000001; + mpc512x_fec_init (dev, NULL); + } + } + + if (!(pRbd->status & FEC_RBD_EMPTY)) { + if (!(pRbd->status & FEC_RBD_ERR) && + ((pRbd->dataLength - 4) > 14)) { + + /* + * Get buffer size + */ + if (pRbd->status & FEC_RBD_LAST) + frame_length = pRbd->dataLength - 4; + else + frame_length = pRbd->dataLength; +#if (DEBUG & 0x20) + { + int i; + printf ("recv data length 0x%08x data hdr: ", + pRbd->dataLength); + for (i = 0; i < 14; i++) + printf ("%x ", *((uint8*)pRbd->dataPointer + i)); + printf("\n"); + } +#endif + /* + * Fill the buffer and pass it to upper layers + */ + memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer, + frame_length - rx_buff_idx); + rx_buff_idx = frame_length; + + if (pRbd->status & FEC_RBD_LAST) { + NetReceive ((uchar*)rx_buff, frame_length); + rx_buff_idx = 0; + } + } + + /* + * Reset buffer descriptor as empty + */ + mpc512x_fec_rbd_clean (fec, pRbd); + } + + /* Try to fill Buffer Descriptors */ + fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ + return frame_length; +} + +/********************************************************************/ +int mpc512x_fec_initialize (bd_t * bis) +{ + mpc512x_fec_priv *fec; + struct eth_device *dev; + int i; + char *tmp, *end, env_enetaddr[6]; + void * bd; + + fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); + dev = (struct eth_device *) malloc (sizeof(*dev)); + memset (dev, 0, sizeof *dev); + + fec->eth = (ethernet_regs *) MPC512X_FEC; + +# ifndef CONFIG_FEC_10MBIT + fec->xcv_type = MII100; +# else + fec->xcv_type = MII10; +# endif + dev->priv = (void *)fec; + dev->iobase = MPC512X_FEC; + dev->init = mpc512x_fec_init; + dev->halt = mpc512x_fec_halt; + dev->send = mpc512x_fec_send; + dev->recv = mpc512x_fec_recv; + + sprintf (dev->name, "FEC ETHERNET"); + eth_register (dev); + +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) + miiphy_register (dev->name, + fec512x_miiphy_read, fec512x_miiphy_write); +#endif + + /* Clean up space FEC's MIB and FIFO RAM ...*/ + memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400); + + /* + * Malloc space for BDs (must be quad word-aligned) + * this pointer is lost, so cannot be freed + */ + bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); + fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0); + memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); + + /* + * Set interrupt mask register + */ + fec->eth->imask = 0x00000000; + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + fec->eth->ievent = 0xffffffff; + + /* + * Try to set the mac address now. The fec mac address is + * a garbage after reset. When not using fec for booting + * the Linux fec driver will try to work with this garbage. + */ + tmp = getenv ("ethaddr"); + if (tmp) { + for (i=0; i<6; i++) { + env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end+1 : end; + } + mpc512x_fec_set_hwaddr (fec, env_enetaddr); + fec->eth->gaddr1 = 0x00000000; + fec->eth->gaddr2 = 0x00000000; + } + + mpc512x_fec_init_phy (dev, bis); + + return 1; +} + +/* MII-interface related functions */ +/********************************************************************/ +int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) +{ + ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; + uint32 reg; /* convenient holder for the PHY register */ + uint32 phy; /* convenient holder for the PHY */ + int timeout = 0xffff; + + /* + * reading from any PHY's register is done by properly + * programming the FEC's MII data register. + */ + reg = regAddr << FEC_MII_DATA_RA_SHIFT; + phy = phyAddr << FEC_MII_DATA_PA_SHIFT; + + eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); + + /* + * wait for the related interrupt + */ + while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + + if (timeout == 0) { +#if (DEBUG & 0x2) + printf ("Read MDIO failed...\n"); +#endif + return -1; + } + + /* + * clear mii interrupt bit + */ + eth->ievent = 0x00800000; + + /* + * it's now safe to read the PHY's register + */ + *retVal = (uint16) eth->mii_data; + + return 0; +} + +/********************************************************************/ +int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) +{ + ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC; + uint32 reg; /* convenient holder for the PHY register */ + uint32 phy; /* convenient holder for the PHY */ + int timeout = 0xffff; + + reg = regAddr << FEC_MII_DATA_RA_SHIFT; + phy = phyAddr << FEC_MII_DATA_PA_SHIFT; + + eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | + FEC_MII_DATA_TA | phy | reg | data); + + /* + * wait for the MII interrupt + */ + while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + + if (timeout == 0) { +#if (DEBUG & 0x2) + printf ("Write MDIO failed...\n"); +#endif + return -1; + } + + /* + * clear MII interrupt bit + */ + eth->ievent = 0x00800000; + + return 0; +} + +#if (DEBUG & 0x40) +static uint32 local_crc32 (char *string, unsigned int crc_value, int len) +{ + int i; + char c; + unsigned int crc, count; + + /* + * crc32 algorithm + */ + /* + * crc = 0xffffffff; * The initialized value should be 0xffffffff + */ + crc = crc_value; + + for (i = len; --i >= 0;) { + c = *string++; + for (count = 0; count < 8; count++) { + if ((c & 0x01) ^ (crc & 0x01)) { + crc >>= 1; + crc = crc ^ 0xedb88320; + } else { + crc >>= 1; + } + c >>= 1; + } + } + + /* + * In big endian system, do byte swaping for crc value + */ + /**/ return crc; +} +#endif /* DEBUG */ + +#endif /* CONFIG_MPC512x_FEC */ diff --git a/drivers/net/mpc512x_fec.h b/drivers/net/mpc512x_fec.h new file mode 100644 index 0000000000..9c38502870 --- /dev/null +++ b/drivers/net/mpc512x_fec.h @@ -0,0 +1,227 @@ +/* + * (C) Copyright 2003 - 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Derived from the MPC8xx driver's header file. + */ + +#ifndef __MPC512X_FEC_H +#define __MPC512X_FEC_H + +#include +#include + +typedef unsigned long uint32; +typedef unsigned short uint16; +typedef unsigned char uint8; + +typedef struct ethernet_register_set { + +/* [10:2]addr = 00 */ + +/* Control and status Registers (offset 000-1FF) */ + + volatile uint32 fec_id; /* MBAR_ETH + 0x000 */ + volatile uint32 ievent; /* MBAR_ETH + 0x004 */ + volatile uint32 imask; /* MBAR_ETH + 0x008 */ + + volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */ + volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */ + volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */ + + volatile uint32 RES1[3]; /* MBAR_ETH + 0x018-020 */ + volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */ + + volatile uint32 RES2[6]; /* MBAR_ETH + 0x028-03C */ + volatile uint32 mii_data; /* MBAR_ETH + 0x040 */ + volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */ + + volatile uint32 RES3[7]; /* MBAR_ETH + 0x048-060 */ + volatile uint32 mib_control; /* MBAR_ETH + 0x064 */ + + volatile uint32 RES4[7]; /* MBAR_ETH + 0x068-80 */ + volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */ + volatile uint32 r_hash; /* MBAR_ETH + 0x088 */ + + volatile uint32 RES5[14]; /* MBAR_ETH + 0x08c-0C0 */ + volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */ + + volatile uint32 RES6[7]; /* MBAR_ETH + 0x0C8-0E0 */ + volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */ + volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */ + volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */ + + volatile uint32 RES7[10]; /* MBAR_ETH + 0x0F0-114 */ + volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */ + volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */ + volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */ + volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */ + + volatile uint32 RES8[6]; /* MBAR_ETH + 0x128-13C */ + volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */ + volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */ + volatile uint32 RES9[1]; /* MBAR_ETH + 0x148 */ + volatile uint32 r_bound; /* MBAR_ETH + 0x14C */ + volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */ + + volatile uint32 RES10[11]; /* MBAR_ETH + 0x154-17C */ + volatile uint32 r_des_start; /* MBAR_ETH + 0x180 */ + volatile uint32 x_des_start; /* MBAR_ETH + 0x184 */ + volatile uint32 r_buff_size; /* MBAR_ETH + 0x188 */ + volatile uint32 RES11[26]; /* MBAR_ETH + 0x18C-1F0 */ + volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */ + volatile uint32 RES12[2]; /* MBAR_ETH + 0x1F8-1FC */ + +/* MIB COUNTERS (Offset 200-2FF) */ + + volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */ + volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */ + volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ + volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ + volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */ + volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */ + volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */ + volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */ + volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */ + volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */ + volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */ + volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */ + volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */ + volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */ + volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ + volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */ + volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ + volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */ + volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */ + volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ + volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */ + volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */ + volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */ + volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */ + volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */ + volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */ + volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */ + volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */ + volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */ + volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ + + volatile uint32 RES13[2]; /* MBAR_ETH + 0x278-27C */ + volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */ + volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */ + volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ + volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ + volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */ + volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */ + volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */ + volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */ + volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */ + + volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ + + volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */ + volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ + volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ + volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ + volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ + volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */ + volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ + volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */ + volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */ + volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ + volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */ + volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */ + volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */ + volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */ + volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ + + volatile uint32 RES14[6]; /* MBAR_ETH + 0x2E4-2FC */ + + volatile uint32 RES15[64]; /* MBAR_ETH + 0x300-3FF */ +} ethernet_regs; + +/* Receive & Transmit Buffer Descriptor definitions */ +typedef struct BufferDescriptor { + uint16 status; + uint16 dataLength; + uint32 dataPointer; +} FEC_RBD; + +typedef struct { + uint16 status; + uint16 dataLength; + uint32 dataPointer; +} FEC_TBD; + +/* private structure */ +typedef enum { + SEVENWIRE, /* 7-wire */ + MII10, /* MII 10Mbps */ + MII100 /* MII 100Mbps */ +} xceiver_type; + +/* BD Numer definitions */ +#define FEC_TBD_NUM 48 /* The user can adjust this value */ +#define FEC_RBD_NUM 32 /* The user can adjust this value */ + +/* packet size limit */ +#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */ + +/* Buffer size must be evenly divisible by 16 */ +#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf)) + +typedef struct { + uint8 frame[FEC_BUFFER_SIZE]; +} mpc512x_frame; + +typedef struct { + FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */ + FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */ + mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */ +} mpc512x_buff_descs; + +typedef struct { + ethernet_regs *eth; + xceiver_type xcv_type; /* transceiver type */ + mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */ + uint16 rbdIndex; /* next receive BD to read */ + uint16 tbdIndex; /* next transmit BD to send */ + uint16 usedTbdIndex; /* next transmit BD to clean */ + uint16 cleanTbdNum; /* the number of available transmit BDs */ +} mpc512x_fec_priv; + +/* RBD bits definitions */ +#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ +#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ +#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ +#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ +#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ +#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ +#define FEC_RBD_LG 0x0020 /* Frame length violation */ +#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ +#define FEC_RBD_SH 0x0008 /* Short frame */ +#define FEC_RBD_CR 0x0004 /* CRC error */ +#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ +#define FEC_RBD_TR 0x0001 /* Frame is truncated */ +#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ + FEC_RBD_OV | FEC_RBD_TR) + +/* TBD bits definitions */ +#define FEC_TBD_READY 0x8000 /* Buffer is ready */ +#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ +#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ +#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ +#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ + +/* MII-related definitios */ +#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ +#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ +#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ +#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ +#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ +#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ +#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ + +#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ +#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ + +#endif /* __MPC512X_FEC_H */