From: Ley Foon Tan <ley.foon.tan@intel.com>
Date: Fri, 7 Sep 2018 06:25:29 +0000 (+0800)
Subject: spi: designware_spi: Add reset ctrl to driver
X-Git-Tag: v2018.11-rc2~70^2~2
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6ac5909f51fb4e50604f1a89d0535aefcc51f476;p=oweals%2Fu-boot.git

spi: designware_spi: Add reset ctrl to driver

Add code to reset all reset signals as in SPI DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.

If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.

Release reset when _remove().

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
---

diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index d8b73ea326..5cca414486 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -17,6 +17,7 @@
 #include <malloc.h>
 #include <spi.h>
 #include <fdtdec.h>
+#include <reset.h>
 #include <linux/compat.h>
 #include <linux/iopoll.h>
 #include <asm/io.h>
@@ -111,6 +112,8 @@ struct dw_spi_priv {
 	void *tx_end;
 	void *rx;
 	void *rx_end;
+
+	struct reset_ctl_bulk	resets;
 };
 
 static inline u32 dw_read(struct dw_spi_priv *priv, u32 offset)
@@ -231,6 +234,34 @@ err_rate:
 	return -EINVAL;
 }
 
+static int dw_spi_reset(struct udevice *bus)
+{
+	int ret;
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+
+	ret = reset_get_bulk(bus, &priv->resets);
+	if (ret) {
+		/*
+		 * Return 0 if error due to !CONFIG_DM_RESET and reset
+		 * DT property is not present.
+		 */
+		if (ret == -ENOENT || ret == -ENOTSUPP)
+			return 0;
+
+		dev_warn(bus, "Can't get reset: %d\n", ret);
+		return ret;
+	}
+
+	ret = reset_deassert_bulk(&priv->resets);
+	if (ret) {
+		reset_release_bulk(&priv->resets);
+		dev_err(bus, "Failed to reset: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int dw_spi_probe(struct udevice *bus)
 {
 	struct dw_spi_platdata *plat = dev_get_platdata(bus);
@@ -244,6 +275,10 @@ static int dw_spi_probe(struct udevice *bus)
 	if (ret)
 		return ret;
 
+	ret = dw_spi_reset(bus);
+	if (ret)
+		return ret;
+
 	/* Currently only bits_per_word == 8 supported */
 	priv->bits_per_word = 8;
 
@@ -478,6 +513,13 @@ static int dw_spi_set_mode(struct udevice *bus, uint mode)
 	return 0;
 }
 
+static int dw_spi_remove(struct udevice *bus)
+{
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+
+	return reset_release_bulk(&priv->resets);
+}
+
 static const struct dm_spi_ops dw_spi_ops = {
 	.xfer		= dw_spi_xfer,
 	.set_speed	= dw_spi_set_speed,
@@ -502,4 +544,5 @@ U_BOOT_DRIVER(dw_spi) = {
 	.platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
 	.priv_auto_alloc_size = sizeof(struct dw_spi_priv),
 	.probe = dw_spi_probe,
+	.remove = dw_spi_remove,
 };