From: Masahiro Yamada Date: Fri, 16 Sep 2016 18:33:09 +0000 (+0900) Subject: ARM: uniphier: move PLL init code to U-Boot proper where possible X-Git-Tag: v2016.11-rc1~129^2~3 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6a3e4274e479a70069518679e45fe85ef3f30a36;p=oweals%2Fu-boot.git ARM: uniphier: move PLL init code to U-Boot proper where possible The PLL for the DRAM interface must be initialized in SPL, but the others can be delayed until U-Boot proper. Move them from SPL to U-Boot proper to save the precious SPL memory footprint. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index c9d3f28f58..a1c75414c3 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -65,6 +65,7 @@ int board_init(void) case SOC_UNIPHIER_SLD3: uniphier_nand_pin_init(true); led_puts("U1"); + uniphier_sld3_pll_init(); uniphier_ld4_clk_init(); break; #endif @@ -72,6 +73,7 @@ int board_init(void) case SOC_UNIPHIER_LD4: uniphier_nand_pin_init(true); led_puts("U1"); + uniphier_ld4_pll_init(); uniphier_ld4_clk_init(); break; #endif @@ -79,6 +81,7 @@ int board_init(void) case SOC_UNIPHIER_PRO4: uniphier_nand_pin_init(false); led_puts("U1"); + uniphier_pro4_pll_init(); uniphier_pro4_clk_init(); break; #endif @@ -86,6 +89,7 @@ int board_init(void) case SOC_UNIPHIER_SLD8: uniphier_nand_pin_init(true); led_puts("U1"); + uniphier_ld4_pll_init(); uniphier_ld4_clk_init(); break; #endif diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index 1428e0c9cc..b722781443 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -2,10 +2,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-pro4.o -obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-ld4.o pll-sld3.o dpll-tail.o +obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-ld4.o pll-ld4.o dpll-tail.o +obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-pro4.o pll-pro4.o dpll-tail.o +obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o pll-ld4.o dpll-tail.o obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-pro5.o obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-pxs2.o diff --git a/arch/arm/mach-uniphier/clk/dpll-tail.c b/arch/arm/mach-uniphier/clk/dpll-tail.c new file mode 100644 index 0000000000..2b88490f42 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/dpll-tail.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#include "../sc-regs.h" +#include "pll.h" + +void uniphier_ld4_dpll_ssc_en(void) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); +} diff --git a/arch/arm/mach-uniphier/clk/pll-ld4.c b/arch/arm/mach-uniphier/clk/pll-ld4.c new file mode 100644 index 0000000000..13257e4d16 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/pll-ld4.c @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2013-2014 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#include "../init.h" +#include "../sc-regs.h" +#include "../sg-regs.h" +#include "pll.h" + +static void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void uniphier_ld4_pll_init(void) +{ + upll_init(); + vpll_init(); + uniphier_ld4_dpll_ssc_en(); +} diff --git a/arch/arm/mach-uniphier/clk/pll-pro4.c b/arch/arm/mach-uniphier/clk/pll-pro4.c new file mode 100644 index 0000000000..cdd1fd4bf1 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/pll-pro4.c @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2013-2014 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#include "../init.h" +#include "../sc-regs.h" +#include "../sg-regs.h" +#include "pll.h" + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + /* Set VPLL27A & VPLL27B */ + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) + return; + + /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Unset VPLA_K_LD and VPLB_K_LD bit */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set VPLA_M and VPLB_M to 0x20 */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { + /* Set VPLA_K and VPLB_K for AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* wait 1 usec */ + udelay(1); + + /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Unset VPLA_SNRST and VPLB_SNRST bit */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void uniphier_pro4_pll_init(void) +{ + vpll_init(); + uniphier_ld4_dpll_ssc_en(); +} diff --git a/arch/arm/mach-uniphier/clk/pll-sld3.c b/arch/arm/mach-uniphier/clk/pll-sld3.c new file mode 100644 index 0000000000..37a7c12782 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/pll-sld3.c @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "../init.h" +#include "pll.h" + +void uniphier_sld3_pll_init(void) +{ + uniphier_ld4_dpll_ssc_en(); +} diff --git a/arch/arm/mach-uniphier/clk/pll.h b/arch/arm/mach-uniphier/clk/pll.h new file mode 100644 index 0000000000..ef0f722d0a --- /dev/null +++ b/arch/arm/mach-uniphier/clk/pll.h @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef MACH_PLL_H +#define MACH_PLL_H + +void uniphier_ld4_dpll_ssc_en(void); + +#endif /* MACH_PLL_H */ diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h index 1dc53d5d7a..d8f5b49345 100644 --- a/arch/arm/mach-uniphier/init.h +++ b/arch/arm/mach-uniphier/init.h @@ -80,13 +80,10 @@ int memconf_init(const struct uniphier_board_data *bd); int uniphier_sld3_memconf_init(const struct uniphier_board_data *bd); int uniphier_pxs2_memconf_init(const struct uniphier_board_data *bd); -int uniphier_sld3_pll_init(const struct uniphier_board_data *bd); -int uniphier_ld4_pll_init(const struct uniphier_board_data *bd); -int uniphier_pro4_pll_init(const struct uniphier_board_data *bd); -int uniphier_sld8_pll_init(const struct uniphier_board_data *bd); - -int uniphier_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd); -int uniphier_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd); +int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd); +int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd); +int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd); +int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd); int uniphier_ld4_early_clk_init(const struct uniphier_board_data *bd); int uniphier_pro5_early_clk_init(const struct uniphier_board_data *bd); @@ -101,6 +98,10 @@ int uniphier_pxs2_umc_init(const struct uniphier_board_data *bd); int uniphier_ld20_umc_init(const struct uniphier_board_data *bd); int uniphier_ld11_umc_init(const struct uniphier_board_data *bd); +void uniphier_sld3_pll_init(void); +void uniphier_ld4_pll_init(void); +void uniphier_pro4_pll_init(void); + void uniphier_ld4_clk_init(void); void uniphier_pro4_clk_init(void); void uniphier_pro5_clk_init(void); diff --git a/arch/arm/mach-uniphier/init/init-ld4.c b/arch/arm/mach-uniphier/init/init-ld4.c index b1c9b5dcd6..2f4c60dd71 100644 --- a/arch/arm/mach-uniphier/init/init-ld4.c +++ b/arch/arm/mach-uniphier/init/init-ld4.c @@ -1,5 +1,7 @@ /* - * Copyright (C) 2013-2015 Masahiro Yamada + * Copyright (C) 2013-2015 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -19,7 +21,7 @@ int uniphier_ld4_init(const struct uniphier_board_data *bd) support_card_reset(); - uniphier_ld4_pll_init(bd); + uniphier_ld4_dpll_init(bd); support_card_init(); @@ -53,9 +55,5 @@ int uniphier_ld4_init(const struct uniphier_board_data *bd) led_puts("L5"); - uniphier_ld4_enable_dpll_ssc(bd); - - led_puts("L6"); - return 0; } diff --git a/arch/arm/mach-uniphier/init/init-pro4.c b/arch/arm/mach-uniphier/init/init-pro4.c index 3528d84e8d..2825150198 100644 --- a/arch/arm/mach-uniphier/init/init-pro4.c +++ b/arch/arm/mach-uniphier/init/init-pro4.c @@ -1,5 +1,7 @@ /* - * Copyright (C) 2013-2015 Masahiro Yamada + * Copyright (C) 2013-2015 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -16,7 +18,7 @@ int uniphier_pro4_init(const struct uniphier_board_data *bd) support_card_reset(); - uniphier_pro4_pll_init(bd); + uniphier_pro4_dpll_init(bd); support_card_init(); @@ -50,9 +52,5 @@ int uniphier_pro4_init(const struct uniphier_board_data *bd) led_puts("L5"); - uniphier_ld4_enable_dpll_ssc(bd); - - led_puts("L6"); - return 0; } diff --git a/arch/arm/mach-uniphier/init/init-sld3.c b/arch/arm/mach-uniphier/init/init-sld3.c index 1ee57ecf56..ee3245c846 100644 --- a/arch/arm/mach-uniphier/init/init-sld3.c +++ b/arch/arm/mach-uniphier/init/init-sld3.c @@ -1,5 +1,7 @@ /* - * Copyright (C) 2013-2015 Masahiro Yamada + * Copyright (C) 2013-2015 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -18,7 +20,7 @@ int uniphier_sld3_init(const struct uniphier_board_data *bd) support_card_reset(); - uniphier_sld3_pll_init(bd); + uniphier_sld3_dpll_init(bd); support_card_init(); @@ -43,9 +45,5 @@ int uniphier_sld3_init(const struct uniphier_board_data *bd) led_puts("L5"); - uniphier_sld3_enable_dpll_ssc(bd); - - led_puts("L6"); - return 0; } diff --git a/arch/arm/mach-uniphier/init/init-sld8.c b/arch/arm/mach-uniphier/init/init-sld8.c index 07c6d60ad1..82d036b73b 100644 --- a/arch/arm/mach-uniphier/init/init-sld8.c +++ b/arch/arm/mach-uniphier/init/init-sld8.c @@ -1,5 +1,7 @@ /* - * Copyright (C) 2013-2015 Masahiro Yamada + * Copyright (C) 2013-2015 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -19,7 +21,7 @@ int uniphier_sld8_init(const struct uniphier_board_data *bd) support_card_reset(); - uniphier_sld8_pll_init(bd); + uniphier_sld8_dpll_init(bd); support_card_init(); @@ -53,9 +55,5 @@ int uniphier_sld8_init(const struct uniphier_board_data *bd) led_puts("L5"); - uniphier_ld4_enable_dpll_ssc(bd); - - led_puts("L6"); - return 0; } diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile index 63f169ccc3..db22ba4ae1 100644 --- a/arch/arm/mach-uniphier/pll/Makefile +++ b/arch/arm/mach-uniphier/pll/Makefile @@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += pll-init-sld3.o pll-spectrum-sld3.o -obj-$(CONFIG_ARCH_UNIPHIER_LD4) += pll-init-ld4.o pll-spectrum-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += pll-init-pro4.o pll-spectrum-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += pll-init-sld8.o pll-spectrum-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += pll-init-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_LD4) += pll-init-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += pll-init-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += pll-init-sld8.o diff --git a/arch/arm/mach-uniphier/pll/pll-init-ld4.c b/arch/arm/mach-uniphier/pll/pll-init-ld4.c index 57c1d9f7df..a40b30d0e0 100644 --- a/arch/arm/mach-uniphier/pll/pll-init-ld4.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ld4.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2011-2015 Masahiro Yamada + * Copyright (C) 2013-2014 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -10,12 +11,12 @@ #include "../init.h" #include "../sc-regs.h" -#include "../sg-regs.h" #undef DPLL_SSC_RATE_1PER -static int dpll_init(unsigned int dram_freq) +int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd) { + unsigned int dram_freq = bd->dram_freq; u32 tmp; /* @@ -48,157 +49,8 @@ static int dpll_init(unsigned int dram_freq) tmp |= SC_DPLLCTRL2_NRSTDS; writel(tmp, SC_DPLLCTRL2); - return 0; -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -int uniphier_ld4_pll_init(const struct uniphier_board_data *bd) -{ - int ret; - - ret = dpll_init(bd->dram_freq); - if (ret) - return ret; - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); + /* Wait 500 usec until dpll gets stable */ + udelay(500); return 0; } diff --git a/arch/arm/mach-uniphier/pll/pll-init-pro4.c b/arch/arm/mach-uniphier/pll/pll-init-pro4.c index a7e4e0ec9e..3ac48d6365 100644 --- a/arch/arm/mach-uniphier/pll/pll-init-pro4.c +++ b/arch/arm/mach-uniphier/pll/pll-init-pro4.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2011-2015 Masahiro Yamada + * Copyright (C) 2013-2014 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -10,12 +11,12 @@ #include "../init.h" #include "../sc-regs.h" -#include "../sg-regs.h" #undef DPLL_SSC_RATE_1PER -static int dpll_init(unsigned int dram_freq) +int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd) { + unsigned int dram_freq = bd->dram_freq; u32 tmp; /* @@ -52,113 +53,8 @@ static int dpll_init(unsigned int dram_freq) tmp |= SC_DPLLCTRL2_NRSTDS; writel(tmp, SC_DPLLCTRL2); - return 0; -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - /* Set VPLL27A & VPLL27B */ - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) - return; - - /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Unset VPLA_K_LD and VPLB_K_LD bit */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set VPLA_M and VPLB_M to 0x20 */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { - /* Set VPLA_K and VPLB_K for AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* wait 1 usec */ - udelay(1); - - /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Unset VPLA_SNRST and VPLB_SNRST bit */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -int uniphier_pro4_pll_init(const struct uniphier_board_data *bd) -{ - int ret; - - ret = dpll_init(bd->dram_freq); - if (ret) - return ret; - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 1 usec in vpll_init() so 1 usec can be saved here. - */ - udelay(499); + /* Wait until dpll gets stable */ + udelay(500); return 0; } diff --git a/arch/arm/mach-uniphier/pll/pll-init-sld3.c b/arch/arm/mach-uniphier/pll/pll-init-sld3.c index 5b4f2e3a1e..0eb310ceb8 100644 --- a/arch/arm/mach-uniphier/pll/pll-init-sld3.c +++ b/arch/arm/mach-uniphier/pll/pll-init-sld3.c @@ -6,7 +6,7 @@ #include "../init.h" -int uniphier_sld3_pll_init(const struct uniphier_board_data *bd) +int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd) { /* add pll init code here */ return 0; diff --git a/arch/arm/mach-uniphier/pll/pll-init-sld8.c b/arch/arm/mach-uniphier/pll/pll-init-sld8.c index 8b6a67ce90..7faa5e85b6 100644 --- a/arch/arm/mach-uniphier/pll/pll-init-sld8.c +++ b/arch/arm/mach-uniphier/pll/pll-init-sld8.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2011-2015 Masahiro Yamada + * Copyright (C) 2013-2014 Panasonic Corporation + * Copyright (C) 2015-2016 Socionext Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,9 +10,8 @@ #include "../init.h" #include "../sc-regs.h" -#include "../sg-regs.h" -static void dpll_init(void) +int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd) { u32 tmp; /* @@ -54,152 +54,9 @@ static void dpll_init(void) tmp &= ~0xefffffff; tmp |= 0x0cfeb851; writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -int uniphier_sld8_pll_init(const struct uniphier_board_data *bd) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); + /* Wait 500 usec until dpll gets stable */ + udelay(500); return 0; } diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ld4.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ld4.c deleted file mode 100644 index dc97697fe4..0000000000 --- a/arch/arm/mach-uniphier/pll/pll-spectrum-ld4.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#include "../init.h" -#include "../sc-regs.h" - -int uniphier_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd) -{ - u32 tmp; - - tmp = readl(SC_DPLLCTRL); - tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); - - return 0; -} diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-sld3.c b/arch/arm/mach-uniphier/pll/pll-spectrum-sld3.c deleted file mode 100644 index ff09a92005..0000000000 --- a/arch/arm/mach-uniphier/pll/pll-spectrum-sld3.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#include "../init.h" -#include "../sc-regs.h" - -int uniphier_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd) -{ - u32 tmp; - - tmp = readl(SC_DPLLCTRL); - tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); - - return 0; -}