From: Tom Rini <trini@konsulko.com>
Date: Wed, 3 Jan 2018 14:01:33 +0000 (-0500)
Subject: arm: ls1021atwr: Rework local commands to not be included in SPL
X-Git-Tag: v2018.03-rc1~171^2~6
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=68ae7772aff3f6e96a805e0ae411a1c42460865e;p=oweals%2Fu-boot.git

arm: ls1021atwr: Rework local commands to not be included in SPL

Move some of the code for the "lane_bank" and "cpld" code local
commands so that they are not built for SPL as they can only be
used in full U-Boot.  This means we can mark a few functions as
static as well now.

Cc: Alison Wang <alison.wang@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
Tested-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
---

diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 2da06773c4..622a500953 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -92,9 +92,7 @@ struct cpld_data {
 };
 
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-static void convert_serdes_mux(int type, int need_reset);
-
-void cpld_show(void)
+static void cpld_show(void)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
 
@@ -292,6 +290,47 @@ int board_eth_init(bd_t *bis)
 }
 
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+static void convert_serdes_mux(int type, int need_reset)
+{
+	char current_serdes;
+	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+	current_serdes = cpld_data->serdes_mux;
+
+	switch (type) {
+	case LANEB_SATA:
+		current_serdes &= ~MASK_LANE_B;
+		break;
+	case LANEB_SGMII1:
+		current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
+		break;
+	case LANEC_SGMII1:
+		current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
+		break;
+	case LANED_SGMII2:
+		current_serdes |= MASK_LANE_D;
+		break;
+	case LANEC_PCIEX1:
+		current_serdes |= MASK_LANE_C;
+		break;
+	case (LANED_PCIEX2 | LANEC_PCIEX1):
+		current_serdes |= MASK_LANE_C;
+		current_serdes &= ~MASK_LANE_D;
+		break;
+	default:
+		printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type);
+		return;
+	}
+
+	cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES;
+	cpld_data->serdes_mux = current_serdes;
+
+	if (need_reset == 1) {
+		printf("Reset board to enable configuration\n");
+		cpld_data->system_rst = CONFIG_RESET;
+	}
+}
+
 int config_serdes_mux(void)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -584,7 +623,8 @@ u16 flash_read16(void *addr)
 	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
 }
 
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) \
+	&& !defined(CONFIG_SPL_BUILD)
 static void convert_flash_bank(char bank)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -645,48 +685,7 @@ U_BOOT_CMD(
 
 );
 
-static void convert_serdes_mux(int type, int need_reset)
-{
-	char current_serdes;
-	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
-	current_serdes = cpld_data->serdes_mux;
-
-	switch (type) {
-	case LANEB_SATA:
-		current_serdes &= ~MASK_LANE_B;
-		break;
-	case LANEB_SGMII1:
-		current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
-		break;
-	case LANEC_SGMII1:
-		current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
-		break;
-	case LANED_SGMII2:
-		current_serdes |= MASK_LANE_D;
-		break;
-	case LANEC_PCIEX1:
-		current_serdes |= MASK_LANE_C;
-		break;
-	case (LANED_PCIEX2 | LANEC_PCIEX1):
-		current_serdes |= MASK_LANE_C;
-		current_serdes &= ~MASK_LANE_D;
-		break;
-	default:
-		printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type);
-		return;
-	}
-
-	cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES;
-	cpld_data->serdes_mux = current_serdes;
-
-	if (need_reset == 1) {
-		printf("Reset board to enable configuration\n");
-		cpld_data->system_rst = CONFIG_RESET;
-	}
-}
-
-void print_serdes_mux(void)
+static void print_serdes_mux(void)
 {
 	char current_serdes;
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);