From: Masahiro Yamada Date: Fri, 16 Sep 2016 18:33:11 +0000 (+0900) Subject: ARM: uniphier: add PLL init code for LD20 SoC X-Git-Tag: v2016.11-rc1~129^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=682e09ff9f35;p=oweals%2Fu-boot.git ARM: uniphier: add PLL init code for LD20 SoC Initialize the DPLL (PLL for DRAM) in SPL, and others in U-Boot proper. Split the common code into pll-base-ld20.c for easier re-use. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index a1c75414c3..b57a33f299 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -58,8 +58,14 @@ static void uniphier_nand_pin_init(bool cs2) int board_init(void) { + const struct uniphier_board_data *bd; + led_puts("U0"); + bd = uniphier_get_board_param(); + if (!bd) + return -ENODEV; + switch (uniphier_get_soc_type()) { #if defined(CONFIG_ARCH_UNIPHIER_SLD3) case SOC_UNIPHIER_SLD3: @@ -133,6 +139,7 @@ int board_init(void) sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */ sg_set_iectrl(153); led_puts("U1"); + uniphier_ld20_pll_init(bd); uniphier_ld20_clk_init(); cci500_init(2); break; diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index 233e6591ee..c8d59eabe3 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += early-clk-pro5.o obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += early-clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += early-clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD11) += early-clk-ld11.o -obj-$(CONFIG_ARCH_UNIPHIER_LD20) += early-clk-ld20.o +obj-$(CONFIG_ARCH_UNIPHIER_LD20) += early-clk-ld20.o dpll-ld20.o else @@ -24,6 +24,8 @@ obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-pro5.o obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-ld11.o -obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-ld20.o +obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-ld20.o pll-ld20.o endif + +obj-$(CONFIG_ARCH_UNIPHIER_LD20) += pll-base-ld20.o diff --git a/arch/arm/mach-uniphier/clk/dpll-ld20.c b/arch/arm/mach-uniphier/clk/dpll-ld20.c new file mode 100644 index 0000000000..113231307a --- /dev/null +++ b/arch/arm/mach-uniphier/clk/dpll-ld20.c @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "../init.h" +#include "../sc64-regs.h" +#include "pll.h" + +int uniphier_ld20_dpll_init(const struct uniphier_board_data *bd) +{ + unsigned int dpll_ssc_rate = UNIPHIER_BD_DPLL_SSC_GET_RATE(bd->flags); + unsigned int dram_freq = bd->dram_freq; + + uniphier_ld20_sscpll_init(SC_DPLL0CTRL, dram_freq, dpll_ssc_rate, 2); + uniphier_ld20_sscpll_init(SC_DPLL1CTRL, dram_freq, dpll_ssc_rate, 2); + uniphier_ld20_sscpll_init(SC_DPLL2CTRL, dram_freq, dpll_ssc_rate, 2); + + return 0; +} diff --git a/arch/arm/mach-uniphier/clk/pll-base-ld20.c b/arch/arm/mach-uniphier/clk/pll-base-ld20.c new file mode 100644 index 0000000000..a5027d2079 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/pll-base-ld20.c @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#include "pll.h" + +/* PLL type: SSC */ +#define SC_PLLCTRL_SSC_DK_MASK GENMASK(14, 0) +#define SC_PLLCTRL_SSC_EN BIT(31) +#define SC_PLLCTRL2_NRSTDS BIT(28) +#define SC_PLLCTRL2_SSC_JK_MASK GENMASK(26, 0) + +/* PLL type: VPLL27 */ +#define SC_VPLL27CTRL_WP BIT(0) +#define SC_VPLL27CTRL3_K_LD BIT(28) + +/* PLL type: DSPLL */ +#define SC_DSPLLCTRL2_K_LD BIT(28) + +int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq, + unsigned int ssc_rate, unsigned int divn) +{ + void __iomem *base; + u32 tmp; + + base = ioremap(reg_base, SZ_16); + if (!base) + return -ENOMEM; + + if (freq != UNIPHIER_PLL_FREQ_DEFAULT) { + tmp = readl(base); /* SSCPLLCTRL */ + tmp &= ~SC_PLLCTRL_SSC_DK_MASK; + tmp |= (487 * freq * ssc_rate / divn / 512) & + SC_PLLCTRL_SSC_DK_MASK; + writel(tmp, base); + + tmp = readl(base + 4); + tmp &= ~SC_PLLCTRL2_SSC_JK_MASK; + tmp |= (41859 * freq / divn) & SC_PLLCTRL2_SSC_JK_MASK; + + udelay(50); + } + + tmp = readl(base + 4); /* SSCPLLCTRL2 */ + tmp |= SC_PLLCTRL2_NRSTDS; + writel(tmp, base + 4); + + iounmap(base); + + return 0; +} + +int uniphier_ld20_sscpll_ssc_en(unsigned long reg_base) +{ + void __iomem *base; + u32 tmp; + + base = ioremap(reg_base, SZ_16); + if (!base) + return -ENOMEM; + + mdelay(1); + + tmp = readl(base); /* SSCPLLCTRL */ + tmp |= SC_PLLCTRL_SSC_EN; + writel(tmp, base); + + iounmap(base); + + return 0; +} + +int uniphier_ld20_vpll27_init(unsigned long reg_base) +{ + void __iomem *base; + u32 tmp; + + base = ioremap(reg_base, SZ_16); + if (!base) + return -ENOMEM; + + tmp = readl(base); /* VPLL27CTRL */ + tmp |= SC_VPLL27CTRL_WP; /* write protect off */ + writel(tmp, base); + + tmp = readl(base + 8); /* VPLL27CTRL3 */ + tmp |= SC_VPLL27CTRL3_K_LD; + writel(tmp, base + 8); + + tmp = readl(base); /* VPLL27CTRL */ + tmp &= ~SC_VPLL27CTRL_WP; /* write protect on */ + writel(tmp, base); + + iounmap(base); + + return 0; +} + +int uniphier_ld20_dspll_init(unsigned long reg_base) +{ + void __iomem *base; + u32 tmp; + + base = ioremap(reg_base, SZ_16); + if (!base) + return -ENOMEM; + + tmp = readl(base + 8); /* DSPLLCTRL2 */ + tmp |= SC_DSPLLCTRL2_K_LD; + writel(tmp, base + 8); + + iounmap(base); + + return 0; +} diff --git a/arch/arm/mach-uniphier/clk/pll-ld20.c b/arch/arm/mach-uniphier/clk/pll-ld20.c new file mode 100644 index 0000000000..5e545da227 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/pll-ld20.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +#include "../init.h" +#include "../sc64-regs.h" +#include "pll.h" + +int uniphier_ld20_pll_init(const struct uniphier_board_data *bd) +{ + unsigned int dpll_ssc_rate = UNIPHIER_BD_DPLL_SSC_GET_RATE(bd->flags); + + uniphier_ld20_sscpll_init(SC_CPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4); + /* do nothing for SPLL */ + uniphier_ld20_sscpll_init(SC_SPLL2CTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4); + uniphier_ld20_sscpll_init(SC_MPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + uniphier_ld20_sscpll_init(SC_VPPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 4); + uniphier_ld20_sscpll_init(SC_GPPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2); + + mdelay(1); + + if (dpll_ssc_rate > 0) { + uniphier_ld20_sscpll_ssc_en(SC_DPLL0CTRL); + uniphier_ld20_sscpll_ssc_en(SC_DPLL1CTRL); + uniphier_ld20_sscpll_ssc_en(SC_DPLL2CTRL); + } + + uniphier_ld20_vpll27_init(SC_VPLL27FCTRL); + uniphier_ld20_vpll27_init(SC_VPLL27ACTRL); + + uniphier_ld20_dspll_init(SC_VPLL8KCTRL); + uniphier_ld20_dspll_init(SC_A2PLLCTRL); + + return 0; +} diff --git a/arch/arm/mach-uniphier/clk/pll.h b/arch/arm/mach-uniphier/clk/pll.h index ef0f722d0a..d7e93037d6 100644 --- a/arch/arm/mach-uniphier/clk/pll.h +++ b/arch/arm/mach-uniphier/clk/pll.h @@ -8,6 +8,14 @@ #ifndef MACH_PLL_H #define MACH_PLL_H +#define UNIPHIER_PLL_FREQ_DEFAULT (0) + void uniphier_ld4_dpll_ssc_en(void); +int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq, + unsigned int ssc_rate, unsigned int divn); +int uniphier_ld20_sscpll_ssc_en(unsigned long reg_base); +int uniphier_ld20_vpll27_init(unsigned long reg_base); +int uniphier_ld20_dspll_init(unsigned long reg_base); + #endif /* MACH_PLL_H */ diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h index d8f5b49345..5c7cd6b6a4 100644 --- a/arch/arm/mach-uniphier/init.h +++ b/arch/arm/mach-uniphier/init.h @@ -24,6 +24,9 @@ struct uniphier_board_data { struct uniphier_dram_ch dram_ch[UNIPHIER_MAX_NR_DRAM_CH]; unsigned int flags; +#define UNIPHIER_BD_DPLL_SSC_GET_RATE(f) (((f) >> 8) & 0x3) +#define UNIPHIER_BD_DPLL_SSC_RATE(r) (((r) & 0x3) << 8) + #define UNIPHIER_BD_DDR3PLUS BIT(2) #define UNIPHIER_BD_BOARD_GET_TYPE(f) ((f) & 0x3) @@ -84,6 +87,7 @@ int uniphier_sld3_dpll_init(const struct uniphier_board_data *bd); int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd); int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd); int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd); +int uniphier_ld20_dpll_init(const struct uniphier_board_data *bd); int uniphier_ld4_early_clk_init(const struct uniphier_board_data *bd); int uniphier_pro5_early_clk_init(const struct uniphier_board_data *bd); @@ -101,6 +105,7 @@ int uniphier_ld11_umc_init(const struct uniphier_board_data *bd); void uniphier_sld3_pll_init(void); void uniphier_ld4_pll_init(void); void uniphier_pro4_pll_init(void); +int uniphier_ld20_pll_init(const struct uniphier_board_data *bd); void uniphier_ld4_clk_init(void); void uniphier_pro4_clk_init(void); diff --git a/arch/arm/mach-uniphier/init/init-ld20.c b/arch/arm/mach-uniphier/init/init-ld20.c index a0760461ad..cb05421252 100644 --- a/arch/arm/mach-uniphier/init/init-ld20.c +++ b/arch/arm/mach-uniphier/init/init-ld20.c @@ -32,12 +32,14 @@ int uniphier_ld20_init(const struct uniphier_board_data *bd) led_puts("L2"); - led_puts("L3"); - #ifdef CONFIG_SPL_SERIAL_SUPPORT preloader_console_init(); #endif + led_puts("L3"); + + uniphier_ld20_dpll_init(bd); + led_puts("L4"); { diff --git a/arch/arm/mach-uniphier/sc64-regs.h b/arch/arm/mach-uniphier/sc64-regs.h index ef02830a1e..1e52bb1ef1 100644 --- a/arch/arm/mach-uniphier/sc64-regs.h +++ b/arch/arm/mach-uniphier/sc64-regs.h @@ -1,7 +1,8 @@ /* * UniPhier SC (System Control) block registers for ARMv8 SoCs * - * Copyright (C) 2016 Masahiro Yamada + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -11,6 +12,25 @@ #define SC_BASE_ADDR 0x61840000 +/* PLL type: SSC */ +#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* LD20: CPU/ARM */ +#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* LD20: misc */ +#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* LD20: IPP */ +#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* LD20: Video codec */ +#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1440) /* LD20: VPE etc. */ +#define SC_GPPLLCTRL (SC_BASE_ADDR | 0x1450) /* LD20: GPU/Mali */ +#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1460) /* LD20: DDR memory 0 */ +#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1470) /* LD20: DDR memory 1 */ +#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x1480) /* LD20: DDR memory 2 */ + +/* PLL type: VPLL27 */ +#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500) +#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520) + +/* PLL type: DSPLL */ +#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540) +#define SC_A2PLLCTRL (SC_BASE_ADDR | 0x15C0) + #define SC_RSTCTRL (SC_BASE_ADDR | 0x2000) #define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) #define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c)