From: Baruch Siach <baruch@tkos.co.il>
Date: Sun, 3 Feb 2019 13:15:39 +0000 (+0200)
Subject: pcie: designware: mvebu: fix reset release polarity
X-Git-Tag: v2019.04-rc2~17^2~3
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=6664a0e5f3694592966c92ec4a0547ad77b84a9a;p=oweals%2Fu-boot.git

pcie: designware: mvebu: fix reset release polarity

The dm_gpio_set_value() routine sets signal logical level, with
GPIO_ACTIVE_LOW/HIGH value taken into account. Reset active value is 1
(asserted), while reset inactive value is 0 (de-asserted). Fix the reset
toggle code to set the correct reset logic value.

Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
---

diff --git a/drivers/pci/pcie_dw_mvebu.c b/drivers/pci/pcie_dw_mvebu.c
index 8081005c27..95fb41966f 100644
--- a/drivers/pci/pcie_dw_mvebu.c
+++ b/drivers/pci/pcie_dw_mvebu.c
@@ -489,7 +489,9 @@ static int pcie_dw_mvebu_probe(struct udevice *dev)
 	 * using this GPIO.
 	 */
 	if (dm_gpio_is_valid(&reset_gpio)) {
-		dm_gpio_set_value(&reset_gpio, 1);
+		dm_gpio_set_value(&reset_gpio, 1); /* assert */
+		mdelay(200);
+		dm_gpio_set_value(&reset_gpio, 0); /* de-assert */
 		mdelay(200);
 	}
 #else