From: Breno Matheus Lima Date: Wed, 5 Jun 2019 18:18:30 +0000 (+0000) Subject: doc: Remove duplicated documentation directory X-Git-Tag: v2019.07~22^2~2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=656d8da9d2862afd293ae678d37a486d34b76ca2;p=oweals%2Fu-boot.git doc: Remove duplicated documentation directory Commit ad7061ed742e ("doc: Move device tree bindings documentation to doc/device-tree-bindings") moved all device tree binding documentation to doc/device-tree-bindings directory. The current U-Boot project still have two documentation directories: - doc/ - Documentation/ Move all documentation and sphinx files to doc directory so all content can be in a common place. Signed-off-by: Breno Lima --- diff --git a/Documentation/Makefile b/Documentation/Makefile deleted file mode 100644 index 2ca77ad0f2..0000000000 --- a/Documentation/Makefile +++ /dev/null @@ -1,124 +0,0 @@ -# -*- makefile -*- -# Makefile for Sphinx documentation -# - -subdir-y := - -# You can set these variables from the command line. -SPHINXBUILD = sphinx-build -SPHINXOPTS = -SPHINXDIRS = . -_SPHINXDIRS = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py)) -SPHINX_CONF = conf.py -PAPER = -BUILDDIR = $(obj)/output -PDFLATEX = xelatex -LATEXOPTS = -interaction=batchmode - -# User-friendly check for sphinx-build -HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi) - -ifeq ($(HAVE_SPHINX),0) - -.DEFAULT: - $(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.) - @echo - @./scripts/sphinx-pre-install - @echo " SKIP Sphinx $@ target." - -else # HAVE_SPHINX - -# User-friendly check for pdflatex -HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi) - -# Internal variables. -PAPEROPT_a4 = -D latex_paper_size=a4 -PAPEROPT_letter = -D latex_paper_size=letter -KERNELDOC = $(srctree)/scripts/kernel-doc -KERNELDOC_CONF = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC) -ALLSPHINXOPTS = $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) -# the i18n builder cannot share the environment and doctrees with the others -I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . - -# commands; the 'cmd' from scripts/Kbuild.include is not *loopable* -loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit; - -# $2 sphinx builder e.g. "html" -# $3 name of the build subfolder / e.g. "media", used as: -# * dest folder relative to $(BUILDDIR) and -# * cache folder relative to $(BUILDDIR)/.doctrees -# $4 dest subfolder e.g. "man" for man pages at media/man -# $5 reST source folder relative to $(srctree)/$(src), -# e.g. "media" for the linux-tv book-set at ./Documentation/media - -quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4) - cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \ - PYTHONDONTWRITEBYTECODE=1 \ - BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \ - $(SPHINXBUILD) \ - -b $2 \ - -c $(abspath $(srctree)/$(src)) \ - -d $(abspath $(BUILDDIR)/.doctrees/$3) \ - -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \ - $(ALLSPHINXOPTS) \ - $(abspath $(srctree)/$(src)/$5) \ - $(abspath $(BUILDDIR)/$3/$4) - -htmldocs: - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var))) - -linkcheckdocs: - @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var))) - -latexdocs: - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var))) - -ifeq ($(HAVE_PDFLATEX),0) - -pdfdocs: - $(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.) - @echo " SKIP Sphinx $@ target." - -else # HAVE_PDFLATEX - -pdfdocs: latexdocs - $(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;) - -endif # HAVE_PDFLATEX - -epubdocs: - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var))) - -xmldocs: - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var))) - -endif # HAVE_SPHINX - -# The following targets are independent of HAVE_SPHINX, and the rules should -# work or silently pass without Sphinx. - -refcheckdocs: - $(Q)cd $(srctree);scripts/documentation-file-ref-check - -cleandocs: - $(Q)rm -rf $(BUILDDIR) - $(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean - -dochelp: - @echo ' Linux kernel internal documentation in different formats from ReST:' - @echo ' htmldocs - HTML' - @echo ' latexdocs - LaTeX' - @echo ' pdfdocs - PDF' - @echo ' epubdocs - EPUB' - @echo ' xmldocs - XML' - @echo ' linkcheckdocs - check for broken external links (will connect to external hosts)' - @echo ' refcheckdocs - check for references to non-existing files under Documentation' - @echo ' cleandocs - clean all generated files' - @echo - @echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2' - @echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)' - @echo - @echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build' - @echo ' configuration. This is e.g. useful to build with nit-picking config.' - @echo - @echo ' Default location for the generated documents is Documentation/output' diff --git a/Documentation/conf.py b/Documentation/conf.py deleted file mode 100644 index 168c31346b..0000000000 --- a/Documentation/conf.py +++ /dev/null @@ -1,528 +0,0 @@ -# -*- coding: utf-8 -*- -# -# The U-Boot documentation build configuration file, created by -# sphinx-quickstart on Fri Feb 12 13:51:46 2016. -# -# This file is execfile()d with the current directory set to its -# containing dir. -# -# Note that not all possible configuration values are present in this -# autogenerated file. -# -# All configuration values have a default; values that are commented out -# serve to show the default. - -import sys -import os -import sphinx - -# Get Sphinx version -major, minor, patch = sphinx.version_info[:3] - - -# If extensions (or modules to document with autodoc) are in another directory, -# add these directories to sys.path here. If the directory is relative to the -# documentation root, use os.path.abspath to make it absolute, like shown here. -sys.path.insert(0, os.path.abspath('sphinx')) -from load_config import loadConfig - -# -- General configuration ------------------------------------------------ - -# If your documentation needs a minimal Sphinx version, state it here. -needs_sphinx = '1.3' - -# Add any Sphinx extension module names here, as strings. They can be -# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom -# ones. -extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', 'kfigure'] - -# The name of the math extension changed on Sphinx 1.4 -if major == 1 and minor > 3: - extensions.append("sphinx.ext.imgmath") -else: - extensions.append("sphinx.ext.pngmath") - -# Add any paths that contain templates here, relative to this directory. -templates_path = ['_templates'] - -# The suffix(es) of source filenames. -# You can specify multiple suffix as a list of string: -# source_suffix = ['.rst', '.md'] -source_suffix = '.rst' - -# The encoding of source files. -#source_encoding = 'utf-8-sig' - -# The master toctree document. -master_doc = 'index' - -# General information about the project. -project = 'Das U-Boot' -copyright = 'The U-Boot development community' -author = 'The U-Boot development community' - -# The version info for the project you're documenting, acts as replacement for -# |version| and |release|, also used in various other places throughout the -# built documents. -# -# In a normal build, version and release are are set to KERNELVERSION and -# KERNELRELEASE, respectively, from the Makefile via Sphinx command line -# arguments. -# -# The following code tries to extract the information by reading the Makefile, -# when Sphinx is run directly (e.g. by Read the Docs). -try: - makefile_version = None - makefile_patchlevel = None - for line in open('../Makefile'): - key, val = [x.strip() for x in line.split('=', 2)] - if key == 'VERSION': - makefile_version = val - elif key == 'PATCHLEVEL': - makefile_patchlevel = val - if makefile_version and makefile_patchlevel: - break -except: - pass -finally: - if makefile_version and makefile_patchlevel: - version = release = makefile_version + '.' + makefile_patchlevel - else: - version = release = "unknown version" - -# The language for content autogenerated by Sphinx. Refer to documentation -# for a list of supported languages. -# -# This is also used if you do content translation via gettext catalogs. -# Usually you set "language" from the command line for these cases. -language = None - -# There are two options for replacing |today|: either, you set today to some -# non-false value, then it is used: -#today = '' -# Else, today_fmt is used as the format for a strftime call. -#today_fmt = '%B %d, %Y' - -# List of patterns, relative to source directory, that match files and -# directories to ignore when looking for source files. -exclude_patterns = ['output'] - -# The reST default role (used for this markup: `text`) to use for all -# documents. -#default_role = None - -# If true, '()' will be appended to :func: etc. cross-reference text. -#add_function_parentheses = True - -# If true, the current module name will be prepended to all description -# unit titles (such as .. function::). -#add_module_names = True - -# If true, sectionauthor and moduleauthor directives will be shown in the -# output. They are ignored by default. -#show_authors = False - -# The name of the Pygments (syntax highlighting) style to use. -pygments_style = 'sphinx' - -# A list of ignored prefixes for module index sorting. -#modindex_common_prefix = [] - -# If true, keep warnings as "system message" paragraphs in the built documents. -#keep_warnings = False - -# If true, `todo` and `todoList` produce output, else they produce nothing. -todo_include_todos = False - -primary_domain = 'c' -highlight_language = 'none' - -# -- Options for HTML output ---------------------------------------------- - -# The theme to use for HTML and HTML Help pages. See the documentation for -# a list of builtin themes. - -# The Read the Docs theme is available from -# - https://github.com/snide/sphinx_rtd_theme -# - https://pypi.python.org/pypi/sphinx_rtd_theme -# - python-sphinx-rtd-theme package (on Debian) -try: - import sphinx_rtd_theme - html_theme = 'sphinx_rtd_theme' - html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] -except ImportError: - sys.stderr.write('Warning: The Sphinx \'sphinx_rtd_theme\' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.\n') - -# Theme options are theme-specific and customize the look and feel of a theme -# further. For a list of options available for each theme, see the -# documentation. -#html_theme_options = {} - -# Add any paths that contain custom themes here, relative to this directory. -#html_theme_path = [] - -# The name for this set of Sphinx documents. If None, it defaults to -# " v documentation". -#html_title = None - -# A shorter title for the navigation bar. Default is the same as html_title. -#html_short_title = None - -# The name of an image file (relative to this directory) to place at the top -# of the sidebar. -#html_logo = None - -# The name of an image file (within the static path) to use as favicon of the -# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 -# pixels large. -#html_favicon = None - -# Add any paths that contain custom static files (such as style sheets) here, -# relative to this directory. They are copied after the builtin static files, -# so a file named "default.css" will overwrite the builtin "default.css". - -html_static_path = ['sphinx-static'] - -html_context = { - 'css_files': [ - '_static/theme_overrides.css', - ], -} - -# Add any extra paths that contain custom files (such as robots.txt or -# .htaccess) here, relative to this directory. These files are copied -# directly to the root of the documentation. -#html_extra_path = [] - -# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, -# using the given strftime format. -#html_last_updated_fmt = '%b %d, %Y' - -# If true, SmartyPants will be used to convert quotes and dashes to -# typographically correct entities. -#html_use_smartypants = True - -# Custom sidebar templates, maps document names to template names. -#html_sidebars = {} - -# Additional templates that should be rendered to pages, maps page names to -# template names. -#html_additional_pages = {} - -# If false, no module index is generated. -#html_domain_indices = True - -# If false, no index is generated. -#html_use_index = True - -# If true, the index is split into individual pages for each letter. -#html_split_index = False - -# If true, links to the reST sources are added to the pages. -#html_show_sourcelink = True - -# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. -#html_show_sphinx = True - -# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. -#html_show_copyright = True - -# If true, an OpenSearch description file will be output, and all pages will -# contain a tag referring to it. The value of this option must be the -# base URL from which the finished HTML is served. -#html_use_opensearch = '' - -# This is the file name suffix for HTML files (e.g. ".xhtml"). -#html_file_suffix = None - -# Language to be used for generating the HTML full-text search index. -# Sphinx supports the following languages: -# 'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja' -# 'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr' -#html_search_language = 'en' - -# A dictionary with options for the search language support, empty by default. -# Now only 'ja' uses this config value -#html_search_options = {'type': 'default'} - -# The name of a javascript file (relative to the configuration directory) that -# implements a search results scorer. If empty, the default will be used. -#html_search_scorer = 'scorer.js' - -# Output file base name for HTML help builder. -htmlhelp_basename = 'TheUBootdoc' - -# -- Options for LaTeX output --------------------------------------------- - -latex_elements = { -# The paper size ('letterpaper' or 'a4paper'). -'papersize': 'a4paper', - -# The font size ('10pt', '11pt' or '12pt'). -'pointsize': '8pt', - -# Latex figure (float) alignment -#'figure_align': 'htbp', - -# Don't mangle with UTF-8 chars -'inputenc': '', -'utf8extra': '', - -# Additional stuff for the LaTeX preamble. - 'preamble': ''' - % Use some font with UTF-8 support with XeLaTeX - \\usepackage{fontspec} - \\setsansfont{DejaVu Serif} - \\setromanfont{DejaVu Sans} - \\setmonofont{DejaVu Sans Mono} - - ''' -} - -# Fix reference escape troubles with Sphinx 1.4.x -if major == 1 and minor > 3: - latex_elements['preamble'] += '\\renewcommand*{\\DUrole}[2]{ #2 }\n' - -if major == 1 and minor <= 4: - latex_elements['preamble'] += '\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}' -elif major == 1 and (minor > 5 or (minor == 5 and patch >= 3)): - latex_elements['sphinxsetup'] = 'hmargin=0.5in, vmargin=1in' - latex_elements['preamble'] += '\\fvset{fontsize=auto}\n' - -# Customize notice background colors on Sphinx < 1.6: -if major == 1 and minor < 6: - latex_elements['preamble'] += ''' - \\usepackage{ifthen} - - % Put notes in color and let them be inside a table - \\definecolor{NoteColor}{RGB}{204,255,255} - \\definecolor{WarningColor}{RGB}{255,204,204} - \\definecolor{AttentionColor}{RGB}{255,255,204} - \\definecolor{ImportantColor}{RGB}{192,255,204} - \\definecolor{OtherColor}{RGB}{204,204,204} - \\newlength{\\mynoticelength} - \\makeatletter\\newenvironment{coloredbox}[1]{% - \\setlength{\\fboxrule}{1pt} - \\setlength{\\fboxsep}{7pt} - \\setlength{\\mynoticelength}{\\linewidth} - \\addtolength{\\mynoticelength}{-2\\fboxsep} - \\addtolength{\\mynoticelength}{-2\\fboxrule} - \\begin{lrbox}{\\@tempboxa}\\begin{minipage}{\\mynoticelength}}{\\end{minipage}\\end{lrbox}% - \\ifthenelse% - {\\equal{\\py@noticetype}{note}}% - {\\colorbox{NoteColor}{\\usebox{\\@tempboxa}}}% - {% - \\ifthenelse% - {\\equal{\\py@noticetype}{warning}}% - {\\colorbox{WarningColor}{\\usebox{\\@tempboxa}}}% - {% - \\ifthenelse% - {\\equal{\\py@noticetype}{attention}}% - {\\colorbox{AttentionColor}{\\usebox{\\@tempboxa}}}% - {% - \\ifthenelse% - {\\equal{\\py@noticetype}{important}}% - {\\colorbox{ImportantColor}{\\usebox{\\@tempboxa}}}% - {\\colorbox{OtherColor}{\\usebox{\\@tempboxa}}}% - }% - }% - }% - }\\makeatother - - \\makeatletter - \\renewenvironment{notice}[2]{% - \\def\\py@noticetype{#1} - \\begin{coloredbox}{#1} - \\bf\\it - \\par\\strong{#2} - \\csname py@noticestart@#1\\endcsname - } - { - \\csname py@noticeend@\\py@noticetype\\endcsname - \\end{coloredbox} - } - \\makeatother - - ''' - -# With Sphinx 1.6, it is possible to change the Bg color directly -# by using: -# \definecolor{sphinxnoteBgColor}{RGB}{204,255,255} -# \definecolor{sphinxwarningBgColor}{RGB}{255,204,204} -# \definecolor{sphinxattentionBgColor}{RGB}{255,255,204} -# \definecolor{sphinximportantBgColor}{RGB}{192,255,204} -# -# However, it require to use sphinx heavy box with: -# -# \renewenvironment{sphinxlightbox} {% -# \\begin{sphinxheavybox} -# } -# \\end{sphinxheavybox} -# } -# -# Unfortunately, the implementation is buggy: if a note is inside a -# table, it isn't displayed well. So, for now, let's use boring -# black and white notes. - -# Grouping the document tree into LaTeX files. List of tuples -# (source start file, target name, title, -# author, documentclass [howto, manual, or own class]). -# Sorted in alphabetical order -latex_documents = [ - ('index', 'u-boot-hacker-manual.tex', 'U-Boot Hacker Manual', - 'The U-Boot development community', 'manual'), -] - -# The name of an image file (relative to this directory) to place at the top of -# the title page. -#latex_logo = None - -# For "manual" documents, if this is true, then toplevel headings are parts, -# not chapters. -#latex_use_parts = False - -# If true, show page references after internal links. -#latex_show_pagerefs = False - -# If true, show URL addresses after external links. -#latex_show_urls = False - -# Documents to append as an appendix to all manuals. -#latex_appendices = [] - -# If false, no module index is generated. -#latex_domain_indices = True - - -# -- Options for manual page output --------------------------------------- - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - (master_doc, 'dasuboot', 'The U-Boot Documentation', - [author], 1) -] - -# If true, show URL addresses after external links. -#man_show_urls = False - - -# -- Options for Texinfo output ------------------------------------------- - -# Grouping the document tree into Texinfo files. List of tuples -# (source start file, target name, title, author, -# dir menu entry, description, category) -texinfo_documents = [ - (master_doc, 'DasUBoot', 'The U-Boot Documentation', - author, 'DasUBoot', 'One line description of project.', - 'Miscellaneous'), -] - -# Documents to append as an appendix to all manuals. -#texinfo_appendices = [] - -# If false, no module index is generated. -#texinfo_domain_indices = True - -# How to display URL addresses: 'footnote', 'no', or 'inline'. -#texinfo_show_urls = 'footnote' - -# If true, do not generate a @detailmenu in the "Top" node's menu. -#texinfo_no_detailmenu = False - - -# -- Options for Epub output ---------------------------------------------- - -# Bibliographic Dublin Core info. -epub_title = project -epub_author = author -epub_publisher = author -epub_copyright = copyright - -# The basename for the epub file. It defaults to the project name. -#epub_basename = project - -# The HTML theme for the epub output. Since the default themes are not -# optimized for small screen space, using the same theme for HTML and epub -# output is usually not wise. This defaults to 'epub', a theme designed to save -# visual space. -#epub_theme = 'epub' - -# The language of the text. It defaults to the language option -# or 'en' if the language is not set. -#epub_language = '' - -# The scheme of the identifier. Typical schemes are ISBN or URL. -#epub_scheme = '' - -# The unique identifier of the text. This can be a ISBN number -# or the project homepage. -#epub_identifier = '' - -# A unique identification for the text. -#epub_uid = '' - -# A tuple containing the cover image and cover page html template filenames. -#epub_cover = () - -# A sequence of (type, uri, title) tuples for the guide element of content.opf. -#epub_guide = () - -# HTML files that should be inserted before the pages created by sphinx. -# The format is a list of tuples containing the path and title. -#epub_pre_files = [] - -# HTML files that should be inserted after the pages created by sphinx. -# The format is a list of tuples containing the path and title. -#epub_post_files = [] - -# A list of files that should not be packed into the epub file. -epub_exclude_files = ['search.html'] - -# The depth of the table of contents in toc.ncx. -#epub_tocdepth = 3 - -# Allow duplicate toc entries. -#epub_tocdup = True - -# Choose between 'default' and 'includehidden'. -#epub_tocscope = 'default' - -# Fix unsupported image types using the Pillow. -#epub_fix_images = False - -# Scale large images. -#epub_max_image_width = 0 - -# How to display URL addresses: 'footnote', 'no', or 'inline'. -#epub_show_urls = 'inline' - -# If false, no index is generated. -#epub_use_index = True - -#======= -# rst2pdf -# -# Grouping the document tree into PDF files. List of tuples -# (source start file, target name, title, author, options). -# -# See the Sphinx chapter of http://ralsina.me/static/manual.pdf -# -# FIXME: Do not add the index file here; the result will be too big. Adding -# multiple PDF files here actually tries to get the cross-referencing right -# *between* PDF files. -pdf_documents = [ - ('uboot-documentation', u'U-Boot', u'U-Boot', u'J. Random Bozo'), -] - -# kernel-doc extension configuration for running Sphinx directly (e.g. by Read -# the Docs). In a normal build, these are supplied from the Makefile via command -# line arguments. -kerneldoc_bin = '../scripts/kernel-doc' -kerneldoc_srctree = '..' - -# ------------------------------------------------------------------------------ -# Since loadConfig overwrites settings from the global namespace, it has to be -# the last statement in the conf.py file -# ------------------------------------------------------------------------------ -loadConfig(globals()) diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt deleted file mode 100644 index fbe6cb21f4..0000000000 --- a/Documentation/devicetree/bindings/arm/l2c2x0.txt +++ /dev/null @@ -1,114 +0,0 @@ -* ARM L2 Cache Controller - -ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/ -PL310 and variants) based level 2 cache controller. All these various implementations -of the L2 cache controller have compatible programming models (Note 1). -Some of the properties that are just prefixed "cache-*" are taken from section -3.7.3 of the Devicetree Specification which can be found at: -https://www.devicetree.org/specifications/ - -The ARM L2 cache representation in the device tree should be done as follows: - -Required properties: - -- compatible : should be one of: - "arm,pl310-cache" - "arm,l220-cache" - "arm,l210-cache" - "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" - "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an - offset needs to be added to the address before passing down to the L2 - cache controller - "marvell,aurora-system-cache": Marvell Controller designed to be - compatible with the ARM one, with system cache mode (meaning - maintenance operations on L1 are broadcasted to the L2 and L2 - performs the same operation). - "marvell,aurora-outer-cache": Marvell Controller designed to be - compatible with the ARM one with outer cache mode. - "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible - with arm,pl310-cache controller. -- cache-unified : Specifies the cache is a unified cache. -- cache-level : Should be set to 2 for a level 2 cache. -- reg : Physical base address and size of cache controller's memory mapped - registers. - -Optional properties: - -- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of - read, write and setup latencies. Minimum valid values are 1. Controllers - without setup latency control should use a value of 0. -- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of - read, write and setup latencies. Controllers without setup latency control - should use 0. Controllers without separate read and write Tag RAM latency - values should only use the first cell. -- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. -- arm,filter-ranges : Starting address and length of window to - filter. Addresses in the filter window are directed to the M1 port. Other - addresses will go to the M0 port. -- arm,io-coherent : indicates that the system is operating in an hardware - I/O coherent mode. Valid only when the arm,pl310-cache compatible - string is used. -- interrupts : 1 combined interrupt. -- cache-size : specifies the size in bytes of the cache -- cache-sets : specifies the number of associativity sets of the cache -- cache-block-size : specifies the size in bytes of a cache block -- cache-line-size : specifies the size in bytes of a line in the cache, - if this is not specified, the line size is assumed to be equal to the - cache block size -- cache-id-part: cache id part number to be used if it is not present - on hardware -- wt-override: If present then L2 is forced to Write through mode -- arm,double-linefill : Override double linefill enable setting. Enable if - non-zero, disable if zero. -- arm,double-linefill-incr : Override double linefill on INCR read. Enable - if non-zero, disable if zero. -- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable - if non-zero, disable if zero. -- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero, - disable if zero. -- arm,prefetch-offset : Override prefetch offset value. Valid values are - 0-7, 15, 23, and 31. -- arm,shared-override : The default behavior of the L220 or PL310 cache - controllers with respect to the shareable attribute is to transform "normal - memory non-cacheable transactions" into "cacheable no allocate" (for reads) - or "write through no write allocate" (for writes). - On systems where this may cause DMA buffer corruption, this property must be - specified to indicate that such transforms are precluded. -- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310). -- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310). -- arm,outer-sync-disable : disable the outer sync operation on the L2 cache. - Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that - will randomly hang unless outer sync operations are disabled. -- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> - (forcibly enable), property absent (retain settings set by firmware) -- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), - <1> (forcibly enable), property absent (retain settings set by - firmware) -- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly - disable), <1> (forcibly enable), property absent (OS specific behavior, - preferably retain firmware settings) -- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable), - <1> (forcibly enable), property absent (OS specific behavior, - preferably retain firmware settings) -- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310) -- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero - write (PL310) - -Example: - -L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xfff12000 0x1000>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <2 2 2>; - arm,filter-ranges = <0x80000000 0x8000000>; - cache-unified; - cache-level = <2>; - interrupts = <45>; -}; - -Note 1: The description in this document doesn't apply to integrated L2 - cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These - integrated L2 controllers are assumed to be all preconfigured by - early secure boot code. Thus no need to deal with their configuration - in the kernel at all. diff --git a/Documentation/devicetree/bindings/axi/gdsys,ihs_axi.txt b/Documentation/devicetree/bindings/axi/gdsys,ihs_axi.txt deleted file mode 100644 index 110788fa91..0000000000 --- a/Documentation/devicetree/bindings/axi/gdsys,ihs_axi.txt +++ /dev/null @@ -1,22 +0,0 @@ -gdsys AXI busses of IHS FPGA devices - -Certain gdsys IHS FPGAs offer a interface to their built-in AXI bus with which -the connected devices (usually IP cores) can be controlled via software. - -Required properties: -- compatible: must be "gdsys,ihs_axi" -- reg: describes the address and length of the AXI bus's register map (within - the FPGA's register space) - -Example: - -fpga0_axi_video0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "gdsys,ihs_axi"; - reg = <0x170 0x10>; - - axi_dev_1 { - ... - }; -}; diff --git a/Documentation/devicetree/bindings/board/gdsys,board_gazerbeam.txt b/Documentation/devicetree/bindings/board/gdsys,board_gazerbeam.txt deleted file mode 100644 index 28c1080d90..0000000000 --- a/Documentation/devicetree/bindings/board/gdsys,board_gazerbeam.txt +++ /dev/null @@ -1,46 +0,0 @@ -gdsys Gazerbeam board driver - -This driver provides capabilities to access the gdsys Gazerbeam board's device -information. Furthermore, phandles to some internal devices are provided for -the board files. - -Required properties: -- compatible: should be "gdsys,board_gazerbeam" -- csb: phandle to the board's coherent system bus (CSB) device node -- rxaui[0-3]: phandles to the rxaui control device nodes -- fpga[0-1]: phandles to the board's gdsys FPGA device nodes -- ioep[0-1]: phandles to the board's IO endpoint device nodes -- ver-gpios: GPIO list to read the hardware version from -- var-gpios: GPIO list to read the hardware variant information from -- reset-gpios: GPIO list for the board's reset GPIOs - -Example: - - -board { - compatible = "gdsys,board_gazerbeam"; - csb = <&board_soc>; - serdes = <&SERDES>; - rxaui0 = <&RXAUI0>; - rxaui1 = <&RXAUI1>; - rxaui2 = <&RXAUI2>; - rxaui3 = <&RXAUI3>; - fpga0 = <&FPGA0>; - fpga1 = <&FPGA1>; - ioep0 = <&IOEP0>; - ioep1 = <&IOEP1>; - - ver-gpios = <&PPCPCA 12 0 - &PPCPCA 13 0 - &PPCPCA 14 0 - &PPCPCA 15 0>; - - /* MC2/SC-Board */ - var-gpios-mc2 = <&GPIO_VB0 0 0 /* VAR-MC_SC */ - &GPIO_VB0 11 0>; /* VAR-CON */ - /* MC4-Board */ - var-gpios-mc4 = <&GPIO_VB1 0 0 /* VAR-MC_SC */ - &GPIO_VB1 11 0>; /* VAR-CON */ - - reset-gpios = <&gpio0 1 0 &gpio0 2 1>; -}; diff --git a/Documentation/devicetree/bindings/clk/fsl,mpc83xx-clk.txt b/Documentation/devicetree/bindings/clk/fsl,mpc83xx-clk.txt deleted file mode 100644 index 8313da8507..0000000000 --- a/Documentation/devicetree/bindings/clk/fsl,mpc83xx-clk.txt +++ /dev/null @@ -1,23 +0,0 @@ -MPC83xx system clock devices - -MPC83xx SoCs supply a variety of clocks to drive various components of a -system. - -Required properties: -- compatible: must be one of "fsl,mpc8308-clk", - "fsl,mpc8309-clk", - "fsl,mpc8313-clk", - "fsl,mpc8315-clk", - "fsl,mpc832x-clk", - "fsl,mpc8349-clk", - "fsl,mpc8360-clk", - "fsl,mpc8379-clk" - depending on which SoC is employed -- #clock-cells: Must be 1 - -Example: - -socclocks: clocks { - compatible = "fsl,mpc832x-clk"; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/cpu/fsl,mpc83xx.txt b/Documentation/devicetree/bindings/cpu/fsl,mpc83xx.txt deleted file mode 100644 index ac563d906a..0000000000 --- a/Documentation/devicetree/bindings/cpu/fsl,mpc83xx.txt +++ /dev/null @@ -1,34 +0,0 @@ -MPC83xx CPU devices - -MPC83xx SoCs contain a e300 core as their main processor. - -Required properties: -- compatible: must be one of "fsl,mpc83xx", - "fsl,mpc8308", - "fsl,mpc8309", - "fsl,mpc8313", - "fsl,mpc8315", - "fsl,mpc832x", - "fsl,mpc8349", - "fsl,mpc8360", - "fsl,mpc8379" -- clocks: has to have two entries, which must be the core clock at index 0 and - the CSB (Coherent System Bus) clock at index 1. Both are given by a suitable - "fsl,mpc83xx-clk" device - -Example: - -socclocks: clocks { - compatible = "fsl,mpc8315-clk"; - #clock-cells = <1>; -}; - -cpus { - compatible = "cpu_bus"; - - PowerPC,8315@0 { - compatible = "fsl,mpc8315"; - clocks = <&socclocks MPC83XX_CLK_CORE - &socclocks MPC83XX_CLK_CSB>; - }; -}; diff --git a/Documentation/devicetree/bindings/misc/fsl,mpc83xx-serdes.txt b/Documentation/devicetree/bindings/misc/fsl,mpc83xx-serdes.txt deleted file mode 100644 index 64a9b5b154..0000000000 --- a/Documentation/devicetree/bindings/misc/fsl,mpc83xx-serdes.txt +++ /dev/null @@ -1,24 +0,0 @@ -MPC83xx SerDes controller devices - -MPC83xx SoCs contain a built-in SerDes controller that determines which -protocols (SATA, PCI Express, SGMII, ...) are used on the system's serdes lines -and how the lines are configured. - -Required properties: -- compatible: must be "fsl,mpc83xx-serdes" -- reg: must point to the serdes controller's register map -- proto: selects for which protocol the serdes lines are configured. One of - "sata", "pex", "pex-x2", "sgmii" -- serdes-clk: determines the frequency the serdes lines are configured for. One - of 100, 125, 150. -- vdd: determines whether 1.0V core VDD is used or not - -Example: - -SERDES: serdes@e3000 { - reg = <0xe3000 0x200>; - compatible = "fsl,mpc83xx-serdes"; - proto = "pex"; - serdes-clk = <100>; - vdd; -}; diff --git a/Documentation/devicetree/bindings/misc/gdsys,io-endpoint.txt b/Documentation/devicetree/bindings/misc/gdsys,io-endpoint.txt deleted file mode 100644 index db2ff8ca12..0000000000 --- a/Documentation/devicetree/bindings/misc/gdsys,io-endpoint.txt +++ /dev/null @@ -1,20 +0,0 @@ -gdsys IO endpoint of IHS FPGA devices - -The IO endpoint of IHS FPGA devices is a packet-based transmission interface -that allows interconnected gdsys devices to send and receive data over the -FPGA's main ethernet connection. - -Required properties: -- compatible: must be "gdsys,io-endpoint" -- reg: describes the address and length of the endpoint's register map (within - the FPGA's register space) - -Example: - -fpga0_ep0 { - compatible = "gdsys,io-endpoint"; - reg = <0x020 0x10 - 0x320 0x10 - 0x340 0x10 - 0x360 0x10>; -}; diff --git a/Documentation/devicetree/bindings/misc/gdsys,iocon_fpga.txt b/Documentation/devicetree/bindings/misc/gdsys,iocon_fpga.txt deleted file mode 100644 index acd466fdc6..0000000000 --- a/Documentation/devicetree/bindings/misc/gdsys,iocon_fpga.txt +++ /dev/null @@ -1,19 +0,0 @@ -gdsys IHS FPGA for CON devices - -The gdsys IHS FPGA is the main FPGA on gdsys CON devices. This driver provides -support for enabling and starting the FPGA, as well as verifying working bus -communication. - -Required properties: -- compatible: must be "gdsys,iocon_fpga" -- reset-gpios: List of GPIOs controlling the FPGA's reset -- done-gpios: List of GPIOs notifying whether the FPGA's reconfiguration is - done - -Example: - -FPGA0 { - compatible = "gdsys,iocon_fpga"; - reset-gpios = <&PPCPCA 26 0>; - done-gpios = <&GPIO_VB0 19 0>; -}; diff --git a/Documentation/devicetree/bindings/misc/gdsys,iocpu_fpga.txt b/Documentation/devicetree/bindings/misc/gdsys,iocpu_fpga.txt deleted file mode 100644 index 819db22bf7..0000000000 --- a/Documentation/devicetree/bindings/misc/gdsys,iocpu_fpga.txt +++ /dev/null @@ -1,19 +0,0 @@ -gdsys IHS FPGA for CPU devices - -The gdsys IHS FPGA is the main FPGA on gdsys CPU devices. This driver provides -support for enabling and starting the FPGA, as well as verifying working bus -communication. - -Required properties: -- compatible: must be "gdsys,iocpu_fpga" -- reset-gpios: List of GPIOs controlling the FPGA's reset -- done-gpios: List of GPIOs notifying whether the FPGA's reconfiguration is - done - -Example: - -FPGA0 { - compatible = "gdsys,iocpu_fpga"; - reset-gpios = <&PPCPCA 26 0>; - done-gpios = <&GPIO_VB0 19 0>; -}; diff --git a/Documentation/devicetree/bindings/misc/gdsys,soc.txt b/Documentation/devicetree/bindings/misc/gdsys,soc.txt deleted file mode 100644 index 278e935b16..0000000000 --- a/Documentation/devicetree/bindings/misc/gdsys,soc.txt +++ /dev/null @@ -1,16 +0,0 @@ -gdsys soc bus driver - -This driver provides a simple interface for the busses associated with gdsys -IHS FPGAs. The bus itself contains devices whose register maps are contained -within the FPGA's register space. - -Required properties: -- fpga: A phandle to the controlling IHS FPGA - -Example: - -FPGA0BUS: fpga0bus { - compatible = "gdsys,soc"; - ranges = <0x0 0xe0600000 0x00004000>; - fpga = <&FPGA0>; -}; diff --git a/Documentation/devicetree/bindings/ram/fsl,mpc83xx-mem-controller.txt b/Documentation/devicetree/bindings/ram/fsl,mpc83xx-mem-controller.txt deleted file mode 100644 index da01fe908d..0000000000 --- a/Documentation/devicetree/bindings/ram/fsl,mpc83xx-mem-controller.txt +++ /dev/null @@ -1,314 +0,0 @@ -MPC83xx RAM controller - -This driver supplies support for the embedded RAM controller on MCP83xx-series -SoCs. - -For static configuration mode, each controller node should have child nodes -describing the actual RAM modules installed. - -Controller node -=============== - -Required properties: -- compatible: Must be "fsl,mpc83xx-mem-controller" -- reg: The address of the RAM controller's register space -- #address-cells: Must be 2 -- #size-cells: Must be 1 -- driver_software_override: DDR driver software override is enabled (1) or - disabled (0) -- p_impedance_override: DDR driver software p-impedance override; possible - values: - * DSO_P_IMPEDANCE_HIGHEST_Z - * DSO_P_IMPEDANCE_MUCH_HIGHER_Z - * DSO_P_IMPEDANCE_HIGHER_Z - * DSO_P_IMPEDANCE_NOMINAL - * DSO_P_IMPEDANCE_LOWER_Z -- n_impedance_override: DDR driver software n-impedance override; possible - values: - * DSO_N_IMPEDANCE_HIGHEST_Z - * DSO_N_IMPEDANCE_MUCH_HIGHER_Z - * DSO_N_IMPEDANCE_HIGHER_Z - * DSO_N_IMPEDANCE_NOMINAL - * DSO_N_IMPEDANCE_LOWER_Z -- odt_termination_value: ODT termination value for I/Os; possible values: - * ODT_TERMINATION_75_OHM - * ODT_TERMINATION_150_OHM -- ddr_type: Selects voltage level for DDR pads; possible - values: - * DDR_TYPE_DDR2_1_8_VOLT - * DDR_TYPE_DDR1_2_5_VOLT -- mvref_sel: Determine where MVREF_SEL signal is generated; - possible values: - * MVREF_SEL_EXTERNAL - * MVREF_SEL_INTERNAL_GVDD -- m_odr: Disable memory transaction reordering; possible - values: - * M_ODR_ENABLE - * M_ODR_DISABLE -- clock_adjust: Clock adjust; possible values: - * CLOCK_ADJUST_025 - * CLOCK_ADJUST_05 - * CLOCK_ADJUST_075 - * CLOCK_ADJUST_1 -- ext_refresh_rec: Extended refresh recovery time; possible values: - 0, 16, 32, 48, 64, 80, 96, 112 -- read_to_write: Read-to-write turnaround; possible values: - 0, 1, 2, 3 -- write_to_read: Write-to-read turnaround; possible values: - 0, 1, 2, 3 -- read_to_read: Read-to-read turnaround; possible values: - 0, 1, 2, 3 -- write_to_write: Write-to-write turnaround; possible values: - 0, 1, 2, 3 -- active_powerdown_exit: Active powerdown exit timing; possible values: - 1, 2, 3, 4, 5, 6, 7 -- precharge_powerdown_exit: Precharge powerdown exit timing; possible values: - 1, 2, 3, 4, 5, 6, 7 -- odt_powerdown_exit: ODT powerdown exit timing; possible values: - 0, 1, 2, 3, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 13, 14, 15 -- mode_reg_set_cycle: Mode register set cycle time; possible values: - 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -- precharge_to_activate: Precharge-to-acitvate interval; possible values: - 1, 2, 3, 4, 5, 6, 7 -- activate_to_precharge: Activate to precharge interval; possible values: - 4, 5, 6, 7, 8, 9, 10, 11, 12, - 13, 14, 15, 16, 17, 18, 19 -- activate_to_readwrite: Activate to read/write interval for SDRAM; - possible values: - 1, 2, 3, 4, 5, 6, 7 -- mcas_latency: MCAS latency from READ command; possible values: - * CASLAT_20 - * CASLAT_25 - * CASLAT_30 - * CASLAT_35 - * CASLAT_40 - * CASLAT_45 - * CASLAT_50 - * CASLAT_55 - * CASLAT_60 - * CASLAT_65 - * CASLAT_70 - * CASLAT_75 - * CASLAT_80 -- refresh_recovery: Refresh recovery time; possible values: - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23 -- last_data_to_precharge: Last data to precharge minimum interval; possible - values: - 1, 2, 3, 4, 5, 6, 7 -- activate_to_activate: Activate-to-activate interval; possible values: - 1, 2, 3, 4, 5, 6, 7 -- last_write_data_to_read: Last write data pair to read command issue - interval; possible values: - 1, 2, 3, 4, 5, 6, 7 -- additive_latency: Additive latency; possible values: - 0, 1, 2, 3, 4, 5 -- mcas_to_preamble_override: MCAS-to-preamble-override; possible values: - * READ_LAT - * READ_LAT_PLUS_1_4 - * READ_LAT_PLUS_1_2 - * READ_LAT_PLUS_3_4 - * READ_LAT_PLUS_1 - * READ_LAT_PLUS_5_4 - * READ_LAT_PLUS_3_2 - * READ_LAT_PLUS_7_4 - * READ_LAT_PLUS_2 - * READ_LAT_PLUS_9_4 - * READ_LAT_PLUS_5_2 - * READ_LAT_PLUS_11_4 - * READ_LAT_PLUS_3 - * READ_LAT_PLUS_13_4 - * READ_LAT_PLUS_7_2 - * READ_LAT_PLUS_15_4 - * READ_LAT_PLUS_4 - * READ_LAT_PLUS_17_4 - * READ_LAT_PLUS_9_2 - * READ_LAT_PLUS_19_4 -- write_latency: Write latency; possible values: - 1, 2, 3, 4, 5, 6, 7 -- read_to_precharge: Read to precharge; possible values: - 1, 2, 3, 4 -- write_cmd_to_write_data: Write command to write data strobe timing - adjustment; possible values: - * CLOCK_DELAY_0 - * CLOCK_DELAY_1_4 - * CLOCK_DELAY_1_2 - * CLOCK_DELAY_3_4 - * CLOCK_DELAY_1 - * CLOCK_DELAY_5_4 - * CLOCK_DELAY_3_2 -- minimum_cke_pulse_width: Minimum CKE pulse width; possible values: - 1, 2, 3, 4 -- four_activates_window: Window for four activates; possible values: - 1, 2, 3, 4 8, 9, 10, 11, 12, - 13, 14, 15, 16, 17, 18, 19 -- self_refresh: Self refresh (during sleep); possible values: - * SREN_DISABLE - * SREN_ENABLE -- ecc: Support for ECC; possible values: - * ECC_DISABLE - * ECC_ENABLE -- registered_dram: Support for registered DRAM; possible values: - * RD_DISABLE - * RD_ENABLE -- sdram_type: Type of SDRAM device to be used; possible values: - * TYPE_DDR1 - * TYPE_DDR2 -- dynamic_power_management: Dynamic power management mode; possible values: - * DYN_PWR_DISABLE - * DYN_PWR_ENABLE -- databus_width: DRAM data bus width; possible values - * DATA_BUS_WIDTH_16 - * DATA_BUS_WIDTH_32 -- nc_auto_precharge: Non-concurrent auto-precharge; possible values: - * NCAP_DISABLE - * NCAP_ENABLE -- timing_2t: 2T timing; possible values: - * TIMING_1T - * TIMING_2T -- bank_interleaving_ctrl: Bank (chip select) interleaving control; possible - values: - * INTERLEAVE_NONE - * INTERLEAVE_1_AND_2 -- precharge_bit_8: Precharge bin 8; possible values - * PRECHARGE_MA_10 - * PRECHARGE_MA_8 -- half_strength: Global half-strength override; possible values: - * STRENGTH_FULL - * STRENGTH_HALF -- bypass_initialization: Bypass initialization; possible values: - * INITIALIZATION_DONT_BYPASS - * INITIALIZATION_BYPASS -- force_self_refresh: Force self refresh; possible values: - * MODE_NORMAL - * MODE_REFRESH -- dll_reset: DLL reset; possible values: - * DLL_RESET_ENABLE - * DLL_RESET_DISABLE -- dqs_config: DQS configuration; possible values: - * DQS_TRUE -- odt_config: ODT configuration; possible values: - * ODT_ASSERT_NEVER - * ODT_ASSERT_WRITES - * ODT_ASSERT_READS - * ODT_ASSERT_ALWAYS -- posted_refreshes: Number of posted refreshes - 1, 2, 3, 4, 5, 6, 7, 8 -- sdmode: Initial value loaded into the DDR SDRAM mode - register -- esdmode: Initial value loaded into the DDR SDRAM extended - mode register -- esdmode2: Initial value loaded into the DDR SDRAM extended - mode 2 register -- esdmode3: Initial value loaded into the DDR SDRAM extended - mode 3 register -- refresh_interval: Refresh interval; possible values: - 0 - 65535 -- precharge_interval: Precharge interval; possible values: - 0 - 16383 - -RAM module node: -================ - -Required properties: -- reg: A triple , which consists of: - * cs - the chipselect used to drive this RAM module - * addr - the address where this RAM module's memory is map - to in the global memory space - * size - the size of the RAM module's memory in bytes -- auto_precharge: Chip select auto-precharge; possible values: - * AUTO_PRECHARGE_ENABLE - * AUTO_PRECHARGE_DISABLE -- odt_rd_cfg: ODT for reads configuration; possible values: - * ODT_RD_NEVER - * ODT_RD_ONLY_CURRENT - * ODT_RD_ONLY_OTHER_CS - * ODT_RD_ONLY_OTHER_DIMM - * ODT_RD_ALL -- odt_wr_cfg: ODT for writes configuration; possible values: - * ODT_WR_NEVER - * ODT_WR_ONLY_CURRENT - * ODT_WR_ONLY_OTHER_CS - * ODT_WR_ONLY_OTHER_DIMM - * ODT_WR_ALL -- bank_bits: Number of bank bits for SDRAM on chip select; possible - values: - 2, 3 -- row_bits: Number of row bits for SDRAM on chip select; possible values: - 12, 13, 14 -- col_bits: Number of column bits for SDRAM on chip select; possible - values: - 8, 9, 10, 11 - -Example: - -memory@2000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc83xx-mem-controller"; - reg = <0x2000 0x1000>; - device_type = "memory"; - u-boot,dm-pre-reloc; - - driver_software_override = ; - p_impedance_override = ; - n_impedance_override = ; - odt_termination_value = ; - ddr_type = ; - - clock_adjust = ; - - read_to_write = <0>; - write_to_read = <0>; - read_to_read = <0>; - write_to_write = <0>; - active_powerdown_exit = <2>; - precharge_powerdown_exit = <6>; - odt_powerdown_exit = <8>; - mode_reg_set_cycle = <2>; - - precharge_to_activate = <2>; - activate_to_precharge = <6>; - activate_to_readwrite = <2>; - mcas_latency = ; - refresh_recovery = <17>; - last_data_to_precharge = <2>; - activate_to_activate = <2>; - last_write_data_to_read = <2>; - - additive_latency = <0>; - mcas_to_preamble_override = ; - write_latency = <3>; - read_to_precharge = <2>; - write_cmd_to_write_data = ; - minimum_cke_pulse_width = <3>; - four_activates_window = <5>; - - self_refresh = ; - sdram_type = ; - databus_width = ; - - force_self_refresh = ; - dll_reset = ; - dqs_config = ; - odt_config = ; - posted_refreshes = <1>; - - refresh_interval = <2084>; - precharge_interval = <256>; - - sdmode = <0x0242>; - esdmode = <0x0440>; - - ram@0 { - reg = <0x0 0x0 0x8000000>; - compatible = "nanya,nt5tu64m16hg"; - - odt_rd_cfg = ; - odt_wr_cfg = ; - bank_bits = <3>; - row_bits = <13>; - col_bits = <10>; - }; -}; diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt deleted file mode 100644 index bac4afa3b1..0000000000 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt +++ /dev/null @@ -1,136 +0,0 @@ -*** Reserved memory regions *** - -Reserved memory is specified as a node under the /reserved-memory node. -The operating system shall exclude reserved memory from normal usage -one can create child nodes describing particular reserved (excluded from -normal use) memory regions. Such memory regions are usually designed for -the special usage by various device drivers. - -Parameters for each memory region can be encoded into the device tree -with the following nodes: - -/reserved-memory node ---------------------- -#address-cells, #size-cells (required) - standard definition - - Should use the same values as the root node -ranges (required) - standard definition - - Should be empty - -/reserved-memory/ child nodes ------------------------------ -Each child of the reserved-memory node specifies one or more regions of -reserved memory. Each child node may either use a 'reg' property to -specify a specific range of reserved memory, or a 'size' property with -optional constraints to request a dynamically allocated block of memory. - -Following the generic-names recommended practice, node names should -reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit -address (@
) should be appended to the name if the node is a -static allocation. - -Properties: -Requires either a) or b) below. -a) static allocation - reg (required) - standard definition -b) dynamic allocation - size (required) - length based on parent's #size-cells - - Size in bytes of memory to reserve. - alignment (optional) - length based on parent's #size-cells - - Address boundary for alignment of allocation. - alloc-ranges (optional) - prop-encoded-array (address, length pairs). - - Specifies regions of memory that are - acceptable to allocate from. - -If both reg and size are present, then the reg property takes precedence -and size is ignored. - -Additional properties: -compatible (optional) - standard definition - - may contain the following strings: - - shared-dma-pool: This indicates a region of memory meant to be - used as a shared pool of DMA buffers for a set of devices. It can - be used by an operating system to instantiate the necessary pool - management subsystem if necessary. - - vendor specific string in the form ,[-] -no-map (optional) - empty property - - Indicates the operating system must not create a virtual mapping - of the region as part of its standard mapping of system memory, - nor permit speculative access to it under any circumstances other - than under the control of the device driver using the region. -reusable (optional) - empty property - - The operating system can use the memory in this region with the - limitation that the device driver(s) owning the region need to be - able to reclaim it back. Typically that means that the operating - system can use that region to store volatile or cached data that - can be otherwise regenerated or migrated elsewhere. - -Linux implementation note: -- If a "linux,cma-default" property is present, then Linux will use the - region for the default pool of the contiguous memory allocator. - -- If a "linux,dma-default" property is present, then Linux will use the - region for the default pool of the consistent DMA allocator. - -Device node references to reserved memory ------------------------------------------ -Regions in the /reserved-memory node may be referenced by other device -nodes by adding a memory-region property to the device node. - -memory-region (optional) - phandle, specifier pairs to children of /reserved-memory - -Example -------- -This example defines 3 contiguous regions are defined for Linux kernel: -one default of all device drivers (named linux,cma@72000000 and 64MiB in size), -one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and -one for multimedia processing (named multimedia-memory@77000000, 64MiB). - -/ { - #address-cells = <1>; - #size-cells = <1>; - - memory { - reg = <0x40000000 0x40000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* global autoconfigured region for contiguous allocations */ - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x4000000>; - alignment = <0x2000>; - linux,cma-default; - }; - - display_reserved: framebuffer@78000000 { - reg = <0x78000000 0x800000>; - }; - - multimedia_reserved: multimedia@77000000 { - compatible = "acme,multimedia-memory"; - reg = <0x77000000 0x4000000>; - }; - }; - - /* ... */ - - fb0: video@12300000 { - memory-region = <&display_reserved>; - /* ... */ - }; - - scaler: scaler@12500000 { - memory-region = <&multimedia_reserved>; - /* ... */ - }; - - codec: codec@12600000 { - memory-region = <&multimedia_reserved>; - /* ... */ - }; -}; diff --git a/Documentation/devicetree/bindings/timer/fsl,mpc83xx-timer.txt b/Documentation/devicetree/bindings/timer/fsl,mpc83xx-timer.txt deleted file mode 100644 index 608d24110b..0000000000 --- a/Documentation/devicetree/bindings/timer/fsl,mpc83xx-timer.txt +++ /dev/null @@ -1,21 +0,0 @@ -MPC83xx timer devices - -MPC83xx SoCs offer a decrementer interrupt that can be used to implement delay -functionality, and periodically triggered actions. - -Required properties: -- compatible: must be "fsl,mpc83xx-timer" -- clocks: must be a reference to the system's CSB (coherent system bus) clock, - provided by one of the "fsl,mpc83xx-clk" devices - -Example: - -socclocks: clocks { - compatible = "fsl,mpc832x-clk"; - #clock-cells = <1>; -}; - -timer { - compatible = "fsl,mpc83xx-timer"; - clocks = <&socclocks MPC83XX_CLK_CSB>; -}; diff --git a/Documentation/efi.rst b/Documentation/efi.rst deleted file mode 100644 index 5337a55c3b..0000000000 --- a/Documentation/efi.rst +++ /dev/null @@ -1,22 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -EFI subsystem -============= - -Boot services -------------- - -.. kernel-doc:: lib/efi_loader/efi_boottime.c - :internal: - -Image relocation -~~~~~~~~~~~~~~~~ - -.. kernel-doc:: lib/efi_loader/efi_image_loader.c - :internal: - -Runtime services ----------------- - -.. kernel-doc:: lib/efi_loader/efi_runtime.c - :internal: diff --git a/Documentation/index.rst b/Documentation/index.rst deleted file mode 100644 index 0353c10a4b..0000000000 --- a/Documentation/index.rst +++ /dev/null @@ -1,11 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -####################### -U-Boot Developer Manual -####################### - -.. toctree:: - - efi - linker_lists - serial diff --git a/Documentation/linker_lists.rst b/Documentation/linker_lists.rst deleted file mode 100644 index 72f514e0ac..0000000000 --- a/Documentation/linker_lists.rst +++ /dev/null @@ -1,100 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -Linker-Generated Arrays -======================= - -A linker list is constructed by grouping together linker input -sections, each containing one entry of the list. Each input section -contains a constant initialized variable which holds the entry's -content. Linker list input sections are constructed from the list -and entry names, plus a prefix which allows grouping all lists -together. Assuming _list and _entry are the list and entry names, -then the corresponding input section name is - -:: - - .u_boot_list_ + 2_ + @_list + _2_ + @_entry - -and the C variable name is - -:: - - _u_boot_list + _2_ + @_list + _2_ + @_entry - -This ensures uniqueness for both input section and C variable name. - -Note that the names differ only in the first character, "." for the -section and "_" for the variable, so that the linker cannot confuse -section and symbol names. From now on, both names will be referred -to as - -:: - - %u_boot_list_ + 2_ + @_list + _2_ + @_entry - -Entry variables need never be referred to directly. - -The naming scheme for input sections allows grouping all linker lists -into a single linker output section and grouping all entries for a -single list. - -Note the two '_2_' constant components in the names: their presence -allows putting a start and end symbols around a list, by mapping -these symbols to sections names with components "1" (before) and -"3" (after) instead of "2" (within). -Start and end symbols for a list can generally be defined as - -:: - - %u_boot_list_2_ + @_list + _1_... - %u_boot_list_2_ + @_list + _3_... - -Start and end symbols for the whole of the linker lists area can be -defined as - -:: - - %u_boot_list_1_... - %u_boot_list_3_... - -Here is an example of the sorted sections which result from a list -"array" made up of three entries : "first", "second" and "third", -iterated at least once. - -:: - - .u_boot_list_2_array_1 - .u_boot_list_2_array_2_first - .u_boot_list_2_array_2_second - .u_boot_list_2_array_2_third - .u_boot_list_2_array_3 - -If lists must be divided into sublists (e.g. for iterating only on -part of a list), one can simply give the list a name of the form -'outer_2_inner', where 'outer' is the global list name and 'inner' -is the sub-list name. Iterators for the whole list should use the -global list name ("outer"); iterators for only a sub-list should use -the full sub-list name ("outer_2_inner"). - -Here is an example of the sections generated from a global list -named "drivers", two sub-lists named "i2c" and "pci", and iterators -defined for the whole list and each sub-list: - -:: - - %u_boot_list_2_drivers_1 - %u_boot_list_2_drivers_2_i2c_1 - %u_boot_list_2_drivers_2_i2c_2_first - %u_boot_list_2_drivers_2_i2c_2_first - %u_boot_list_2_drivers_2_i2c_2_second - %u_boot_list_2_drivers_2_i2c_2_third - %u_boot_list_2_drivers_2_i2c_3 - %u_boot_list_2_drivers_2_pci_1 - %u_boot_list_2_drivers_2_pci_2_first - %u_boot_list_2_drivers_2_pci_2_second - %u_boot_list_2_drivers_2_pci_2_third - %u_boot_list_2_drivers_2_pci_3 - %u_boot_list_2_drivers_3 - -.. kernel-doc:: include/linker_lists.h - :internal: diff --git a/Documentation/media/Makefile b/Documentation/media/Makefile deleted file mode 100644 index 0efd18ab4d..0000000000 --- a/Documentation/media/Makefile +++ /dev/null @@ -1,38 +0,0 @@ -# Rules to convert a .h file to inline RST documentation - -SRC_DIR=$(srctree)/Documentation/media -PARSER = $(srctree)/Documentation/sphinx/parse-headers.pl -API = $(srctree)/include - -FILES = linker_lists.h.rst - -TARGETS := $(addprefix $(BUILDDIR)/, $(FILES)) - -gen_rst = \ - echo ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions; \ - ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions - -quiet_gen_rst = echo ' PARSE $(patsubst $(srctree)/%,%,$<)'; \ - ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions - -silent_gen_rst = ${gen_rst} - -$(BUILDDIR)/linker_lists.h.rst: ${API}/linker_lists.h ${PARSER} $(SRC_DIR)/linker_lists.h.rst.exceptions - @$($(quiet)gen_rst) - -# Media build rules - -.PHONY: all html epub xml latex - -all: $(IMGDOT) $(BUILDDIR) ${TARGETS} -html: all -epub: all -xml: all -latex: $(IMGPDF) all -linkcheck: - -clean: - -rm -f $(DOTTGT) $(IMGTGT) ${TARGETS} 2>/dev/null - -$(BUILDDIR): - $(Q)mkdir -p $@ diff --git a/Documentation/media/linker_lists.h.rst.exceptions b/Documentation/media/linker_lists.h.rst.exceptions deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/Documentation/serial.rst b/Documentation/serial.rst deleted file mode 100644 index ed34e592a4..0000000000 --- a/Documentation/serial.rst +++ /dev/null @@ -1,7 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -Serial system -============= - -.. kernel-doc:: drivers/serial/serial.c - :internal: diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css deleted file mode 100644 index 522b6d4c49..0000000000 --- a/Documentation/sphinx-static/theme_overrides.css +++ /dev/null @@ -1,89 +0,0 @@ -/* -*- coding: utf-8; mode: css -*- - * - * Sphinx HTML theme customization: read the doc - * - */ - -/* Interim: Code-blocks with line nos - lines and line numbers don't line up. - * see: https://github.com/rtfd/sphinx_rtd_theme/issues/419 - */ - -div[class^="highlight"] pre { - line-height: normal; -} -.rst-content .highlight > pre { - line-height: normal; -} - -@media screen { - - /* content column - * - * RTD theme's default is 800px as max width for the content, but we have - * tables with tons of columns, which need the full width of the view-port. - */ - - .wy-nav-content{max-width: none; } - - /* table: - * - * - Sequences of whitespace should collapse into a single whitespace. - * - make the overflow auto (scrollbar if needed) - * - align caption "left" ("center" is unsuitable on vast tables) - */ - - .wy-table-responsive table td { white-space: normal; } - .wy-table-responsive { overflow: auto; } - .rst-content table.docutils caption { text-align: left; font-size: 100%; } - - /* captions: - * - * - captions should have 100% (not 85%) font size - * - hide the permalink symbol as long as link is not hovered - */ - - .toc-title { - font-size: 150%; - font-weight: bold; - } - - caption, .wy-table caption, .rst-content table.field-list caption { - font-size: 100%; - } - caption a.headerlink { opacity: 0; } - caption a.headerlink:hover { opacity: 1; } - - /* Menu selection and keystrokes */ - - span.menuselection { - color: blue; - font-family: "Courier New", Courier, monospace - } - - code.kbd, code.kbd span { - color: white; - background-color: darkblue; - font-weight: bold; - font-family: "Courier New", Courier, monospace - } - - /* fix bottom margin of lists items */ - - .rst-content .section ul li:last-child, .rst-content .section ul li p:last-child { - margin-bottom: 12px; - } - - /* inline literal: drop the borderbox, padding and red color */ - - code, .rst-content tt, .rst-content code { - color: inherit; - border: none; - padding: unset; - background: inherit; - font-size: 85%; - } - - .rst-content tt.literal,.rst-content tt.literal,.rst-content code.literal { - color: inherit; - } -} diff --git a/Documentation/sphinx/cdomain.py b/Documentation/sphinx/cdomain.py deleted file mode 100644 index cf13ff3a65..0000000000 --- a/Documentation/sphinx/cdomain.py +++ /dev/null @@ -1,165 +0,0 @@ -# -*- coding: utf-8; mode: python -*- -# pylint: disable=W0141,C0113,C0103,C0325 -u""" - cdomain - ~~~~~~~ - - Replacement for the sphinx c-domain. - - :copyright: Copyright (C) 2016 Markus Heiser - :license: GPL Version 2, June 1991 see Linux/COPYING for details. - - List of customizations: - - * Moved the *duplicate C object description* warnings for function - declarations in the nitpicky mode. See Sphinx documentation for - the config values for ``nitpick`` and ``nitpick_ignore``. - - * Add option 'name' to the "c:function:" directive. With option 'name' the - ref-name of a function can be modified. E.g.:: - - .. c:function:: int ioctl( int fd, int request ) - :name: VIDIOC_LOG_STATUS - - The func-name (e.g. ioctl) remains in the output but the ref-name changed - from 'ioctl' to 'VIDIOC_LOG_STATUS'. The function is referenced by:: - - * :c:func:`VIDIOC_LOG_STATUS` or - * :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3) - - * Handle signatures of function-like macros well. Don't try to deduce - arguments types of function-like macros. - -""" - -from docutils import nodes -from docutils.parsers.rst import directives - -import sphinx -from sphinx import addnodes -from sphinx.domains.c import c_funcptr_sig_re, c_sig_re -from sphinx.domains.c import CObject as Base_CObject -from sphinx.domains.c import CDomain as Base_CDomain - -__version__ = '1.0' - -# Get Sphinx version -major, minor, patch = sphinx.version_info[:3] - -def setup(app): - - app.override_domain(CDomain) - - return dict( - version = __version__, - parallel_read_safe = True, - parallel_write_safe = True - ) - -class CObject(Base_CObject): - - """ - Description of a C language object. - """ - option_spec = { - "name" : directives.unchanged - } - - def handle_func_like_macro(self, sig, signode): - u"""Handles signatures of function-like macros. - - If the objtype is 'function' and the the signature ``sig`` is a - function-like macro, the name of the macro is returned. Otherwise - ``False`` is returned. """ - - if not self.objtype == 'function': - return False - - m = c_funcptr_sig_re.match(sig) - if m is None: - m = c_sig_re.match(sig) - if m is None: - raise ValueError('no match') - - rettype, fullname, arglist, _const = m.groups() - arglist = arglist.strip() - if rettype or not arglist: - return False - - arglist = arglist.replace('`', '').replace('\\ ', '') # remove markup - arglist = [a.strip() for a in arglist.split(",")] - - # has the first argument a type? - if len(arglist[0].split(" ")) > 1: - return False - - # This is a function-like macro, it's arguments are typeless! - signode += addnodes.desc_name(fullname, fullname) - paramlist = addnodes.desc_parameterlist() - signode += paramlist - - for argname in arglist: - param = addnodes.desc_parameter('', '', noemph=True) - # separate by non-breaking space in the output - param += nodes.emphasis(argname, argname) - paramlist += param - - return fullname - - def handle_signature(self, sig, signode): - """Transform a C signature into RST nodes.""" - - fullname = self.handle_func_like_macro(sig, signode) - if not fullname: - fullname = super(CObject, self).handle_signature(sig, signode) - - if "name" in self.options: - if self.objtype == 'function': - fullname = self.options["name"] - else: - # FIXME: handle :name: value of other declaration types? - pass - return fullname - - def add_target_and_index(self, name, sig, signode): - # for C API items we add a prefix since names are usually not qualified - # by a module name and so easily clash with e.g. section titles - targetname = 'c.' + name - if targetname not in self.state.document.ids: - signode['names'].append(targetname) - signode['ids'].append(targetname) - signode['first'] = (not self.names) - self.state.document.note_explicit_target(signode) - inv = self.env.domaindata['c']['objects'] - if (name in inv and self.env.config.nitpicky): - if self.objtype == 'function': - if ('c:func', name) not in self.env.config.nitpick_ignore: - self.state_machine.reporter.warning( - 'duplicate C object description of %s, ' % name + - 'other instance in ' + self.env.doc2path(inv[name][0]), - line=self.lineno) - inv[name] = (self.env.docname, self.objtype) - - indextext = self.get_index_text(name) - if indextext: - if major == 1 and minor < 4: - # indexnode's tuple changed in 1.4 - # https://github.com/sphinx-doc/sphinx/commit/e6a5a3a92e938fcd75866b4227db9e0524d58f7c - self.indexnode['entries'].append( - ('single', indextext, targetname, '')) - else: - self.indexnode['entries'].append( - ('single', indextext, targetname, '', None)) - -class CDomain(Base_CDomain): - - """C language domain.""" - name = 'c' - label = 'C' - directives = { - 'function': CObject, - 'member': CObject, - 'macro': CObject, - 'type': CObject, - 'var': CObject, - } diff --git a/Documentation/sphinx/kernel_include.py b/Documentation/sphinx/kernel_include.py deleted file mode 100755 index f523aa68a3..0000000000 --- a/Documentation/sphinx/kernel_include.py +++ /dev/null @@ -1,190 +0,0 @@ -#!/usr/bin/env python3 -# -*- coding: utf-8; mode: python -*- -# pylint: disable=R0903, C0330, R0914, R0912, E0401 - -u""" - kernel-include - ~~~~~~~~~~~~~~ - - Implementation of the ``kernel-include`` reST-directive. - - :copyright: Copyright (C) 2016 Markus Heiser - :license: GPL Version 2, June 1991 see linux/COPYING for details. - - The ``kernel-include`` reST-directive is a replacement for the ``include`` - directive. The ``kernel-include`` directive expand environment variables in - the path name and allows to include files from arbitrary locations. - - .. hint:: - - Including files from arbitrary locations (e.g. from ``/etc``) is a - security risk for builders. This is why the ``include`` directive from - docutils *prohibit* pathnames pointing to locations *above* the filesystem - tree where the reST document with the include directive is placed. - - Substrings of the form $name or ${name} are replaced by the value of - environment variable name. Malformed variable names and references to - non-existing variables are left unchanged. -""" - -# ============================================================================== -# imports -# ============================================================================== - -import os.path - -from docutils import io, nodes, statemachine -from docutils.utils.error_reporting import SafeString, ErrorString -from docutils.parsers.rst import directives -from docutils.parsers.rst.directives.body import CodeBlock, NumberLines -from docutils.parsers.rst.directives.misc import Include - -__version__ = '1.0' - -# ============================================================================== -def setup(app): -# ============================================================================== - - app.add_directive("kernel-include", KernelInclude) - return dict( - version = __version__, - parallel_read_safe = True, - parallel_write_safe = True - ) - -# ============================================================================== -class KernelInclude(Include): -# ============================================================================== - - u"""KernelInclude (``kernel-include``) directive""" - - def run(self): - path = os.path.realpath( - os.path.expandvars(self.arguments[0])) - - # to get a bit security back, prohibit /etc: - if path.startswith(os.sep + "etc"): - raise self.severe( - 'Problems with "%s" directive, prohibited path: %s' - % (self.name, path)) - - self.arguments[0] = path - - #return super(KernelInclude, self).run() # won't work, see HINTs in _run() - return self._run() - - def _run(self): - """Include a file as part of the content of this reST file.""" - - # HINT: I had to copy&paste the whole Include.run method. I'am not happy - # with this, but due to security reasons, the Include.run method does - # not allow absolute or relative pathnames pointing to locations *above* - # the filesystem tree where the reST document is placed. - - if not self.state.document.settings.file_insertion_enabled: - raise self.warning('"%s" directive disabled.' % self.name) - source = self.state_machine.input_lines.source( - self.lineno - self.state_machine.input_offset - 1) - source_dir = os.path.dirname(os.path.abspath(source)) - path = directives.path(self.arguments[0]) - if path.startswith('<') and path.endswith('>'): - path = os.path.join(self.standard_include_path, path[1:-1]) - path = os.path.normpath(os.path.join(source_dir, path)) - - # HINT: this is the only line I had to change / commented out: - #path = utils.relative_path(None, path) - - path = nodes.reprunicode(path) - encoding = self.options.get( - 'encoding', self.state.document.settings.input_encoding) - e_handler=self.state.document.settings.input_encoding_error_handler - tab_width = self.options.get( - 'tab-width', self.state.document.settings.tab_width) - try: - self.state.document.settings.record_dependencies.add(path) - include_file = io.FileInput(source_path=path, - encoding=encoding, - error_handler=e_handler) - except UnicodeEncodeError as error: - raise self.severe('Problems with "%s" directive path:\n' - 'Cannot encode input file path "%s" ' - '(wrong locale?).' % - (self.name, SafeString(path))) - except IOError as error: - raise self.severe('Problems with "%s" directive path:\n%s.' % - (self.name, ErrorString(error))) - startline = self.options.get('start-line', None) - endline = self.options.get('end-line', None) - try: - if startline or (endline is not None): - lines = include_file.readlines() - rawtext = ''.join(lines[startline:endline]) - else: - rawtext = include_file.read() - except UnicodeError as error: - raise self.severe('Problem with "%s" directive:\n%s' % - (self.name, ErrorString(error))) - # start-after/end-before: no restrictions on newlines in match-text, - # and no restrictions on matching inside lines vs. line boundaries - after_text = self.options.get('start-after', None) - if after_text: - # skip content in rawtext before *and incl.* a matching text - after_index = rawtext.find(after_text) - if after_index < 0: - raise self.severe('Problem with "start-after" option of "%s" ' - 'directive:\nText not found.' % self.name) - rawtext = rawtext[after_index + len(after_text):] - before_text = self.options.get('end-before', None) - if before_text: - # skip content in rawtext after *and incl.* a matching text - before_index = rawtext.find(before_text) - if before_index < 0: - raise self.severe('Problem with "end-before" option of "%s" ' - 'directive:\nText not found.' % self.name) - rawtext = rawtext[:before_index] - - include_lines = statemachine.string2lines(rawtext, tab_width, - convert_whitespace=True) - if 'literal' in self.options: - # Convert tabs to spaces, if `tab_width` is positive. - if tab_width >= 0: - text = rawtext.expandtabs(tab_width) - else: - text = rawtext - literal_block = nodes.literal_block(rawtext, source=path, - classes=self.options.get('class', [])) - literal_block.line = 1 - self.add_name(literal_block) - if 'number-lines' in self.options: - try: - startline = int(self.options['number-lines'] or 1) - except ValueError: - raise self.error(':number-lines: with non-integer ' - 'start value') - endline = startline + len(include_lines) - if text.endswith('\n'): - text = text[:-1] - tokens = NumberLines([([], text)], startline, endline) - for classes, value in tokens: - if classes: - literal_block += nodes.inline(value, value, - classes=classes) - else: - literal_block += nodes.Text(value, value) - else: - literal_block += nodes.Text(text, text) - return [literal_block] - if 'code' in self.options: - self.options['source'] = path - codeblock = CodeBlock(self.name, - [self.options.pop('code')], # arguments - self.options, - include_lines, # content - self.lineno, - self.content_offset, - self.block_text, - self.state, - self.state_machine) - return codeblock.run() - self.state_machine.insert_input(include_lines, path) - return [] diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py deleted file mode 100644 index fbedcc3946..0000000000 --- a/Documentation/sphinx/kerneldoc.py +++ /dev/null @@ -1,146 +0,0 @@ -# coding=utf-8 -# -# Copyright © 2016 Intel Corporation -# -# Permission is hereby granted, free of charge, to any person obtaining a -# copy of this software and associated documentation files (the "Software"), -# to deal in the Software without restriction, including without limitation -# the rights to use, copy, modify, merge, publish, distribute, sublicense, -# and/or sell copies of the Software, and to permit persons to whom the -# Software is furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice (including the next -# paragraph) shall be included in all copies or substantial portions of the -# Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS -# IN THE SOFTWARE. -# -# Authors: -# Jani Nikula -# -# Please make sure this works on both python2 and python3. -# - -import codecs -import os -import subprocess -import sys -import re -import glob - -from docutils import nodes, statemachine -from docutils.statemachine import ViewList -from docutils.parsers.rst import directives, Directive -from sphinx.ext.autodoc import AutodocReporter - -__version__ = '1.0' - -class KernelDocDirective(Directive): - """Extract kernel-doc comments from the specified file""" - required_argument = 1 - optional_arguments = 4 - option_spec = { - 'doc': directives.unchanged_required, - 'functions': directives.unchanged_required, - 'export': directives.unchanged, - 'internal': directives.unchanged, - } - has_content = False - - def run(self): - env = self.state.document.settings.env - cmd = [env.config.kerneldoc_bin, '-rst', '-enable-lineno'] - - filename = env.config.kerneldoc_srctree + '/' + self.arguments[0] - export_file_patterns = [] - - # Tell sphinx of the dependency - env.note_dependency(os.path.abspath(filename)) - - tab_width = self.options.get('tab-width', self.state.document.settings.tab_width) - - # FIXME: make this nicer and more robust against errors - if 'export' in self.options: - cmd += ['-export'] - export_file_patterns = str(self.options.get('export')).split() - elif 'internal' in self.options: - cmd += ['-internal'] - export_file_patterns = str(self.options.get('internal')).split() - elif 'doc' in self.options: - cmd += ['-function', str(self.options.get('doc'))] - elif 'functions' in self.options: - for f in str(self.options.get('functions')).split(): - cmd += ['-function', f] - - for pattern in export_file_patterns: - for f in glob.glob(env.config.kerneldoc_srctree + '/' + pattern): - env.note_dependency(os.path.abspath(f)) - cmd += ['-export-file', f] - - cmd += [filename] - - try: - env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd))) - - p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE) - out, err = p.communicate() - - out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8') - - if p.returncode != 0: - sys.stderr.write(err) - - env.app.warn('kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode)) - return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))] - elif env.config.kerneldoc_verbosity > 0: - sys.stderr.write(err) - - lines = statemachine.string2lines(out, tab_width, convert_whitespace=True) - result = ViewList() - - lineoffset = 0; - line_regex = re.compile("^#define LINENO ([0-9]+)$") - for line in lines: - match = line_regex.search(line) - if match: - # sphinx counts lines from 0 - lineoffset = int(match.group(1)) - 1 - # we must eat our comments since the upset the markup - else: - result.append(line, filename, lineoffset) - lineoffset += 1 - - node = nodes.section() - buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter - self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter) - self.state.memo.title_styles, self.state.memo.section_level = [], 0 - try: - self.state.nested_parse(result, 0, node, match_titles=1) - finally: - self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = buf - - return node.children - - except Exception as e: # pylint: disable=W0703 - env.app.warn('kernel-doc \'%s\' processing failed with: %s' % - (" ".join(cmd), str(e))) - return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))] - -def setup(app): - app.add_config_value('kerneldoc_bin', None, 'env') - app.add_config_value('kerneldoc_srctree', None, 'env') - app.add_config_value('kerneldoc_verbosity', 1, 'env') - - app.add_directive('kernel-doc', KernelDocDirective) - - return dict( - version = __version__, - parallel_read_safe = True, - parallel_write_safe = True - ) diff --git a/Documentation/sphinx/kfigure.py b/Documentation/sphinx/kfigure.py deleted file mode 100644 index b97228d2cc..0000000000 --- a/Documentation/sphinx/kfigure.py +++ /dev/null @@ -1,551 +0,0 @@ -# -*- coding: utf-8; mode: python -*- -# pylint: disable=C0103, R0903, R0912, R0915 -u""" - scalable figure and image handling - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - - Sphinx extension which implements scalable image handling. - - :copyright: Copyright (C) 2016 Markus Heiser - :license: GPL Version 2, June 1991 see Linux/COPYING for details. - - The build for image formats depend on image's source format and output's - destination format. This extension implement methods to simplify image - handling from the author's POV. Directives like ``kernel-figure`` implement - methods *to* always get the best output-format even if some tools are not - installed. For more details take a look at ``convert_image(...)`` which is - the core of all conversions. - - * ``.. kernel-image``: for image handling / a ``.. image::`` replacement - - * ``.. kernel-figure``: for figure handling / a ``.. figure::`` replacement - - * ``.. kernel-render``: for render markup / a concept to embed *render* - markups (or languages). Supported markups (see ``RENDER_MARKUP_EXT``) - - - ``DOT``: render embedded Graphviz's **DOC** - - ``SVG``: render embedded Scalable Vector Graphics (**SVG**) - - ... *developable* - - Used tools: - - * ``dot(1)``: Graphviz (http://www.graphviz.org). If Graphviz is not - available, the DOT language is inserted as literal-block. - - * SVG to PDF: To generate PDF, you need at least one of this tools: - - - ``convert(1)``: ImageMagick (https://www.imagemagick.org) - - List of customizations: - - * generate PDF from SVG / used by PDF (LaTeX) builder - - * generate SVG (html-builder) and PDF (latex-builder) from DOT files. - DOT: see http://www.graphviz.org/content/dot-language - - """ - -import os -from os import path -import subprocess -from hashlib import sha1 -import sys - -from docutils import nodes -from docutils.statemachine import ViewList -from docutils.parsers.rst import directives -from docutils.parsers.rst.directives import images -import sphinx - -from sphinx.util.nodes import clean_astext -from six import iteritems - -PY3 = sys.version_info[0] == 3 - -if PY3: - _unicode = str -else: - _unicode = unicode - -# Get Sphinx version -major, minor, patch = sphinx.version_info[:3] -if major == 1 and minor > 3: - # patches.Figure only landed in Sphinx 1.4 - from sphinx.directives.patches import Figure # pylint: disable=C0413 -else: - Figure = images.Figure - -__version__ = '1.0.0' - -# simple helper -# ------------- - -def which(cmd): - """Searches the ``cmd`` in the ``PATH`` environment. - - This *which* searches the PATH for executable ``cmd`` . First match is - returned, if nothing is found, ``None` is returned. - """ - envpath = os.environ.get('PATH', None) or os.defpath - for folder in envpath.split(os.pathsep): - fname = folder + os.sep + cmd - if path.isfile(fname): - return fname - -def mkdir(folder, mode=0o775): - if not path.isdir(folder): - os.makedirs(folder, mode) - -def file2literal(fname): - with open(fname, "r") as src: - data = src.read() - node = nodes.literal_block(data, data) - return node - -def isNewer(path1, path2): - """Returns True if ``path1`` is newer than ``path2`` - - If ``path1`` exists and is newer than ``path2`` the function returns - ``True`` is returned otherwise ``False`` - """ - return (path.exists(path1) - and os.stat(path1).st_ctime > os.stat(path2).st_ctime) - -def pass_handle(self, node): # pylint: disable=W0613 - pass - -# setup conversion tools and sphinx extension -# ------------------------------------------- - -# Graphviz's dot(1) support -dot_cmd = None - -# ImageMagick' convert(1) support -convert_cmd = None - - -def setup(app): - # check toolchain first - app.connect('builder-inited', setupTools) - - # image handling - app.add_directive("kernel-image", KernelImage) - app.add_node(kernel_image, - html = (visit_kernel_image, pass_handle), - latex = (visit_kernel_image, pass_handle), - texinfo = (visit_kernel_image, pass_handle), - text = (visit_kernel_image, pass_handle), - man = (visit_kernel_image, pass_handle), ) - - # figure handling - app.add_directive("kernel-figure", KernelFigure) - app.add_node(kernel_figure, - html = (visit_kernel_figure, pass_handle), - latex = (visit_kernel_figure, pass_handle), - texinfo = (visit_kernel_figure, pass_handle), - text = (visit_kernel_figure, pass_handle), - man = (visit_kernel_figure, pass_handle), ) - - # render handling - app.add_directive('kernel-render', KernelRender) - app.add_node(kernel_render, - html = (visit_kernel_render, pass_handle), - latex = (visit_kernel_render, pass_handle), - texinfo = (visit_kernel_render, pass_handle), - text = (visit_kernel_render, pass_handle), - man = (visit_kernel_render, pass_handle), ) - - app.connect('doctree-read', add_kernel_figure_to_std_domain) - - return dict( - version = __version__, - parallel_read_safe = True, - parallel_write_safe = True - ) - - -def setupTools(app): - u""" - Check available build tools and log some *verbose* messages. - - This function is called once, when the builder is initiated. - """ - global dot_cmd, convert_cmd # pylint: disable=W0603 - app.verbose("kfigure: check installed tools ...") - - dot_cmd = which('dot') - convert_cmd = which('convert') - - if dot_cmd: - app.verbose("use dot(1) from: " + dot_cmd) - else: - app.warn("dot(1) not found, for better output quality install " - "graphviz from http://www.graphviz.org") - if convert_cmd: - app.verbose("use convert(1) from: " + convert_cmd) - else: - app.warn( - "convert(1) not found, for SVG to PDF conversion install " - "ImageMagick (https://www.imagemagick.org)") - - -# integrate conversion tools -# -------------------------- - -RENDER_MARKUP_EXT = { - # The '.ext' must be handled by convert_image(..) function's *in_ext* input. - # : <.ext> - 'DOT' : '.dot', - 'SVG' : '.svg' -} - -def convert_image(img_node, translator, src_fname=None): - """Convert a image node for the builder. - - Different builder prefer different image formats, e.g. *latex* builder - prefer PDF while *html* builder prefer SVG format for images. - - This function handles output image formats in dependence of source the - format (of the image) and the translator's output format. - """ - app = translator.builder.app - - fname, in_ext = path.splitext(path.basename(img_node['uri'])) - if src_fname is None: - src_fname = path.join(translator.builder.srcdir, img_node['uri']) - if not path.exists(src_fname): - src_fname = path.join(translator.builder.outdir, img_node['uri']) - - dst_fname = None - - # in kernel builds, use 'make SPHINXOPTS=-v' to see verbose messages - - app.verbose('assert best format for: ' + img_node['uri']) - - if in_ext == '.dot': - - if not dot_cmd: - app.verbose("dot from graphviz not available / include DOT raw.") - img_node.replace_self(file2literal(src_fname)) - - elif translator.builder.format == 'latex': - dst_fname = path.join(translator.builder.outdir, fname + '.pdf') - img_node['uri'] = fname + '.pdf' - img_node['candidates'] = {'*': fname + '.pdf'} - - - elif translator.builder.format == 'html': - dst_fname = path.join( - translator.builder.outdir, - translator.builder.imagedir, - fname + '.svg') - img_node['uri'] = path.join( - translator.builder.imgpath, fname + '.svg') - img_node['candidates'] = { - '*': path.join(translator.builder.imgpath, fname + '.svg')} - - else: - # all other builder formats will include DOT as raw - img_node.replace_self(file2literal(src_fname)) - - elif in_ext == '.svg': - - if translator.builder.format == 'latex': - if convert_cmd is None: - app.verbose("no SVG to PDF conversion available / include SVG raw.") - img_node.replace_self(file2literal(src_fname)) - else: - dst_fname = path.join(translator.builder.outdir, fname + '.pdf') - img_node['uri'] = fname + '.pdf' - img_node['candidates'] = {'*': fname + '.pdf'} - - if dst_fname: - # the builder needs not to copy one more time, so pop it if exists. - translator.builder.images.pop(img_node['uri'], None) - _name = dst_fname[len(translator.builder.outdir) + 1:] - - if isNewer(dst_fname, src_fname): - app.verbose("convert: {out}/%s already exists and is newer" % _name) - - else: - ok = False - mkdir(path.dirname(dst_fname)) - - if in_ext == '.dot': - app.verbose('convert DOT to: {out}/' + _name) - ok = dot2format(app, src_fname, dst_fname) - - elif in_ext == '.svg': - app.verbose('convert SVG to: {out}/' + _name) - ok = svg2pdf(app, src_fname, dst_fname) - - if not ok: - img_node.replace_self(file2literal(src_fname)) - - -def dot2format(app, dot_fname, out_fname): - """Converts DOT file to ``out_fname`` using ``dot(1)``. - - * ``dot_fname`` pathname of the input DOT file, including extension ``.dot`` - * ``out_fname`` pathname of the output file, including format extension - - The *format extension* depends on the ``dot`` command (see ``man dot`` - option ``-Txxx``). Normally you will use one of the following extensions: - - - ``.ps`` for PostScript, - - ``.svg`` or ``svgz`` for Structured Vector Graphics, - - ``.fig`` for XFIG graphics and - - ``.png`` or ``gif`` for common bitmap graphics. - - """ - out_format = path.splitext(out_fname)[1][1:] - cmd = [dot_cmd, '-T%s' % out_format, dot_fname] - exit_code = 42 - - with open(out_fname, "w") as out: - exit_code = subprocess.call(cmd, stdout = out) - if exit_code != 0: - app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd))) - return bool(exit_code == 0) - -def svg2pdf(app, svg_fname, pdf_fname): - """Converts SVG to PDF with ``convert(1)`` command. - - Uses ``convert(1)`` from ImageMagick (https://www.imagemagick.org) for - conversion. Returns ``True`` on success and ``False`` if an error occurred. - - * ``svg_fname`` pathname of the input SVG file with extension (``.svg``) - * ``pdf_name`` pathname of the output PDF file with extension (``.pdf``) - - """ - cmd = [convert_cmd, svg_fname, pdf_fname] - # use stdout and stderr from parent - exit_code = subprocess.call(cmd) - if exit_code != 0: - app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd))) - return bool(exit_code == 0) - - -# image handling -# --------------------- - -def visit_kernel_image(self, node): # pylint: disable=W0613 - """Visitor of the ``kernel_image`` Node. - - Handles the ``image`` child-node with the ``convert_image(...)``. - """ - img_node = node[0] - convert_image(img_node, self) - -class kernel_image(nodes.image): - """Node for ``kernel-image`` directive.""" - pass - -class KernelImage(images.Image): - u"""KernelImage directive - - Earns everything from ``.. image::`` directive, except *remote URI* and - *glob* pattern. The KernelImage wraps a image node into a - kernel_image node. See ``visit_kernel_image``. - """ - - def run(self): - uri = self.arguments[0] - if uri.endswith('.*') or uri.find('://') != -1: - raise self.severe( - 'Error in "%s: %s": glob pattern and remote images are not allowed' - % (self.name, uri)) - result = images.Image.run(self) - if len(result) == 2 or isinstance(result[0], nodes.system_message): - return result - (image_node,) = result - # wrap image node into a kernel_image node / see visitors - node = kernel_image('', image_node) - return [node] - -# figure handling -# --------------------- - -def visit_kernel_figure(self, node): # pylint: disable=W0613 - """Visitor of the ``kernel_figure`` Node. - - Handles the ``image`` child-node with the ``convert_image(...)``. - """ - img_node = node[0][0] - convert_image(img_node, self) - -class kernel_figure(nodes.figure): - """Node for ``kernel-figure`` directive.""" - -class KernelFigure(Figure): - u"""KernelImage directive - - Earns everything from ``.. figure::`` directive, except *remote URI* and - *glob* pattern. The KernelFigure wraps a figure node into a kernel_figure - node. See ``visit_kernel_figure``. - """ - - def run(self): - uri = self.arguments[0] - if uri.endswith('.*') or uri.find('://') != -1: - raise self.severe( - 'Error in "%s: %s":' - ' glob pattern and remote images are not allowed' - % (self.name, uri)) - result = Figure.run(self) - if len(result) == 2 or isinstance(result[0], nodes.system_message): - return result - (figure_node,) = result - # wrap figure node into a kernel_figure node / see visitors - node = kernel_figure('', figure_node) - return [node] - - -# render handling -# --------------------- - -def visit_kernel_render(self, node): - """Visitor of the ``kernel_render`` Node. - - If rendering tools available, save the markup of the ``literal_block`` child - node into a file and replace the ``literal_block`` node with a new created - ``image`` node, pointing to the saved markup file. Afterwards, handle the - image child-node with the ``convert_image(...)``. - """ - app = self.builder.app - srclang = node.get('srclang') - - app.verbose('visit kernel-render node lang: "%s"' % (srclang)) - - tmp_ext = RENDER_MARKUP_EXT.get(srclang, None) - if tmp_ext is None: - app.warn('kernel-render: "%s" unknown / include raw.' % (srclang)) - return - - if not dot_cmd and tmp_ext == '.dot': - app.verbose("dot from graphviz not available / include raw.") - return - - literal_block = node[0] - - code = literal_block.astext() - hashobj = code.encode('utf-8') # str(node.attributes) - fname = path.join('%s-%s' % (srclang, sha1(hashobj).hexdigest())) - - tmp_fname = path.join( - self.builder.outdir, self.builder.imagedir, fname + tmp_ext) - - if not path.isfile(tmp_fname): - mkdir(path.dirname(tmp_fname)) - with open(tmp_fname, "w") as out: - out.write(code) - - img_node = nodes.image(node.rawsource, **node.attributes) - img_node['uri'] = path.join(self.builder.imgpath, fname + tmp_ext) - img_node['candidates'] = { - '*': path.join(self.builder.imgpath, fname + tmp_ext)} - - literal_block.replace_self(img_node) - convert_image(img_node, self, tmp_fname) - - -class kernel_render(nodes.General, nodes.Inline, nodes.Element): - """Node for ``kernel-render`` directive.""" - pass - -class KernelRender(Figure): - u"""KernelRender directive - - Render content by external tool. Has all the options known from the - *figure* directive, plus option ``caption``. If ``caption`` has a - value, a figure node with the *caption* is inserted. If not, a image node is - inserted. - - The KernelRender directive wraps the text of the directive into a - literal_block node and wraps it into a kernel_render node. See - ``visit_kernel_render``. - """ - has_content = True - required_arguments = 1 - optional_arguments = 0 - final_argument_whitespace = False - - # earn options from 'figure' - option_spec = Figure.option_spec.copy() - option_spec['caption'] = directives.unchanged - - def run(self): - return [self.build_node()] - - def build_node(self): - - srclang = self.arguments[0].strip() - if srclang not in RENDER_MARKUP_EXT.keys(): - return [self.state_machine.reporter.warning( - 'Unknown source language "%s", use one of: %s.' % ( - srclang, ",".join(RENDER_MARKUP_EXT.keys())), - line=self.lineno)] - - code = '\n'.join(self.content) - if not code.strip(): - return [self.state_machine.reporter.warning( - 'Ignoring "%s" directive without content.' % ( - self.name), - line=self.lineno)] - - node = kernel_render() - node['alt'] = self.options.get('alt','') - node['srclang'] = srclang - literal_node = nodes.literal_block(code, code) - node += literal_node - - caption = self.options.get('caption') - if caption: - # parse caption's content - parsed = nodes.Element() - self.state.nested_parse( - ViewList([caption], source=''), self.content_offset, parsed) - caption_node = nodes.caption( - parsed[0].rawsource, '', *parsed[0].children) - caption_node.source = parsed[0].source - caption_node.line = parsed[0].line - - figure_node = nodes.figure('', node) - for k,v in self.options.items(): - figure_node[k] = v - figure_node += caption_node - - node = figure_node - - return node - -def add_kernel_figure_to_std_domain(app, doctree): - """Add kernel-figure anchors to 'std' domain. - - The ``StandardDomain.process_doc(..)`` method does not know how to resolve - the caption (label) of ``kernel-figure`` directive (it only knows about - standard nodes, e.g. table, figure etc.). Without any additional handling - this will result in a 'undefined label' for kernel-figures. - - This handle adds labels of kernel-figure to the 'std' domain labels. - """ - - std = app.env.domains["std"] - docname = app.env.docname - labels = std.data["labels"] - - for name, explicit in iteritems(doctree.nametypes): - if not explicit: - continue - labelid = doctree.nameids[name] - if labelid is None: - continue - node = doctree.ids[labelid] - - if node.tagname == 'kernel_figure': - for n in node.next_node(): - if n.tagname == 'caption': - sectname = clean_astext(n) - # add label to std domain - labels[name] = docname, labelid, sectname - break diff --git a/Documentation/sphinx/load_config.py b/Documentation/sphinx/load_config.py deleted file mode 100644 index 301a21aa4f..0000000000 --- a/Documentation/sphinx/load_config.py +++ /dev/null @@ -1,32 +0,0 @@ -# -*- coding: utf-8; mode: python -*- -# pylint: disable=R0903, C0330, R0914, R0912, E0401 - -import os -import sys -from sphinx.util.pycompat import execfile_ - -# ------------------------------------------------------------------------------ -def loadConfig(namespace): -# ------------------------------------------------------------------------------ - - u"""Load an additional configuration file into *namespace*. - - The name of the configuration file is taken from the environment - ``SPHINX_CONF``. The external configuration file extends (or overwrites) the - configuration values from the origin ``conf.py``. With this you are able to - maintain *build themes*. """ - - config_file = os.environ.get("SPHINX_CONF", None) - if (config_file is not None - and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ): - config_file = os.path.abspath(config_file) - - if os.path.isfile(config_file): - sys.stdout.write("load additional sphinx-config: %s\n" % config_file) - config = namespace.copy() - config['__file__'] = config_file - execfile_(config_file, config) - del config['__file__'] - namespace.update(config) - else: - sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file) diff --git a/Documentation/sphinx/parse-headers.pl b/Documentation/sphinx/parse-headers.pl deleted file mode 100755 index d410f47567..0000000000 --- a/Documentation/sphinx/parse-headers.pl +++ /dev/null @@ -1,401 +0,0 @@ -#!/usr/bin/perl -use strict; -use Text::Tabs; -use Getopt::Long; -use Pod::Usage; - -my $debug; -my $help; -my $man; - -GetOptions( - "debug" => \$debug, - 'usage|?' => \$help, - 'help' => \$man -) or pod2usage(2); - -pod2usage(1) if $help; -pod2usage(-exitstatus => 0, -verbose => 2) if $man; -pod2usage(2) if (scalar @ARGV < 2 || scalar @ARGV > 3); - -my ($file_in, $file_out, $file_exceptions) = @ARGV; - -my $data; -my %ioctls; -my %defines; -my %typedefs; -my %enums; -my %enum_symbols; -my %structs; - -require Data::Dumper if ($debug); - -# -# read the file and get identifiers -# - -my $is_enum = 0; -my $is_comment = 0; -open IN, $file_in or die "Can't open $file_in"; -while () { - $data .= $_; - - my $ln = $_; - if (!$is_comment) { - $ln =~ s,/\*.*(\*/),,g; - - $is_comment = 1 if ($ln =~ s,/\*.*,,); - } else { - if ($ln =~ s,^(.*\*/),,) { - $is_comment = 0; - } else { - next; - } - } - - if ($is_enum && $ln =~ m/^\s*([_\w][\w\d_]+)\s*[\,=]?/) { - my $s = $1; - my $n = $1; - $n =~ tr/A-Z/a-z/; - $n =~ tr/_/-/; - - $enum_symbols{$s} = "\\ :ref:`$s <$n>`\\ "; - - $is_enum = 0 if ($is_enum && m/\}/); - next; - } - $is_enum = 0 if ($is_enum && m/\}/); - - if ($ln =~ m/^\s*#\s*define\s+([_\w][\w\d_]+)\s+_IO/) { - my $s = $1; - my $n = $1; - $n =~ tr/A-Z/a-z/; - - $ioctls{$s} = "\\ :ref:`$s <$n>`\\ "; - next; - } - - if ($ln =~ m/^\s*#\s*define\s+([_\w][\w\d_]+)\s+/) { - my $s = $1; - my $n = $1; - $n =~ tr/A-Z/a-z/; - $n =~ tr/_/-/; - - $defines{$s} = "\\ :ref:`$s <$n>`\\ "; - next; - } - - if ($ln =~ m/^\s*typedef\s+([_\w][\w\d_]+)\s+(.*)\s+([_\w][\w\d_]+);/) { - my $s = $2; - my $n = $3; - - $typedefs{$n} = "\\ :c:type:`$n <$s>`\\ "; - next; - } - if ($ln =~ m/^\s*enum\s+([_\w][\w\d_]+)\s+\{/ - || $ln =~ m/^\s*enum\s+([_\w][\w\d_]+)$/ - || $ln =~ m/^\s*typedef\s*enum\s+([_\w][\w\d_]+)\s+\{/ - || $ln =~ m/^\s*typedef\s*enum\s+([_\w][\w\d_]+)$/) { - my $s = $1; - - $enums{$s} = "enum :c:type:`$s`\\ "; - - $is_enum = $1; - next; - } - if ($ln =~ m/^\s*struct\s+([_\w][\w\d_]+)\s+\{/ - || $ln =~ m/^\s*struct\s+([[_\w][\w\d_]+)$/ - || $ln =~ m/^\s*typedef\s*struct\s+([_\w][\w\d_]+)\s+\{/ - || $ln =~ m/^\s*typedef\s*struct\s+([[_\w][\w\d_]+)$/ - ) { - my $s = $1; - - $structs{$s} = "struct :c:type:`$s`\\ "; - next; - } -} -close IN; - -# -# Handle multi-line typedefs -# - -my @matches = ($data =~ m/typedef\s+struct\s+\S+?\s*\{[^\}]+\}\s*(\S+)\s*\;/g, - $data =~ m/typedef\s+enum\s+\S+?\s*\{[^\}]+\}\s*(\S+)\s*\;/g,); -foreach my $m (@matches) { - my $s = $m; - - $typedefs{$s} = "\\ :c:type:`$s`\\ "; - next; -} - -# -# Handle exceptions, if any -# - -my %def_reftype = ( - "ioctl" => ":ref", - "define" => ":ref", - "symbol" => ":ref", - "typedef" => ":c:type", - "enum" => ":c:type", - "struct" => ":c:type", -); - -if ($file_exceptions) { - open IN, $file_exceptions or die "Can't read $file_exceptions"; - while () { - next if (m/^\s*$/ || m/^\s*#/); - - # Parsers to ignore a symbol - - if (m/^ignore\s+ioctl\s+(\S+)/) { - delete $ioctls{$1} if (exists($ioctls{$1})); - next; - } - if (m/^ignore\s+define\s+(\S+)/) { - delete $defines{$1} if (exists($defines{$1})); - next; - } - if (m/^ignore\s+typedef\s+(\S+)/) { - delete $typedefs{$1} if (exists($typedefs{$1})); - next; - } - if (m/^ignore\s+enum\s+(\S+)/) { - delete $enums{$1} if (exists($enums{$1})); - next; - } - if (m/^ignore\s+struct\s+(\S+)/) { - delete $structs{$1} if (exists($structs{$1})); - next; - } - if (m/^ignore\s+symbol\s+(\S+)/) { - delete $enum_symbols{$1} if (exists($enum_symbols{$1})); - next; - } - - # Parsers to replace a symbol - my ($type, $old, $new, $reftype); - - if (m/^replace\s+(\S+)\s+(\S+)\s+(\S+)/) { - $type = $1; - $old = $2; - $new = $3; - } else { - die "Can't parse $file_exceptions: $_"; - } - - if ($new =~ m/^\:c\:(data|func|macro|type)\:\`(.+)\`/) { - $reftype = ":c:$1"; - $new = $2; - } elsif ($new =~ m/\:ref\:\`(.+)\`/) { - $reftype = ":ref"; - $new = $1; - } else { - $reftype = $def_reftype{$type}; - } - $new = "$reftype:`$old <$new>`"; - - if ($type eq "ioctl") { - $ioctls{$old} = $new if (exists($ioctls{$old})); - next; - } - if ($type eq "define") { - $defines{$old} = $new if (exists($defines{$old})); - next; - } - if ($type eq "symbol") { - $enum_symbols{$old} = $new if (exists($enum_symbols{$old})); - next; - } - if ($type eq "typedef") { - $typedefs{$old} = $new if (exists($typedefs{$old})); - next; - } - if ($type eq "enum") { - $enums{$old} = $new if (exists($enums{$old})); - next; - } - if ($type eq "struct") { - $structs{$old} = $new if (exists($structs{$old})); - next; - } - - die "Can't parse $file_exceptions: $_"; - } -} - -if ($debug) { - print Data::Dumper->Dump([\%ioctls], [qw(*ioctls)]) if (%ioctls); - print Data::Dumper->Dump([\%typedefs], [qw(*typedefs)]) if (%typedefs); - print Data::Dumper->Dump([\%enums], [qw(*enums)]) if (%enums); - print Data::Dumper->Dump([\%structs], [qw(*structs)]) if (%structs); - print Data::Dumper->Dump([\%defines], [qw(*defines)]) if (%defines); - print Data::Dumper->Dump([\%enum_symbols], [qw(*enum_symbols)]) if (%enum_symbols); -} - -# -# Align block -# -$data = expand($data); -$data = " " . $data; -$data =~ s/\n/\n /g; -$data =~ s/\n\s+$/\n/g; -$data =~ s/\n\s+\n/\n\n/g; - -# -# Add escape codes for special characters -# -$data =~ s,([\_\`\*\<\>\&\\\\:\/\|\%\$\#\{\}\~\^]),\\$1,g; - -$data =~ s,DEPRECATED,**DEPRECATED**,g; - -# -# Add references -# - -my $start_delim = "[ \n\t\(\=\*\@]"; -my $end_delim = "(\\s|,|\\\\=|\\\\:|\\;|\\\)|\\}|\\{)"; - -foreach my $r (keys %ioctls) { - my $s = $ioctls{$r}; - - $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; - - print "$r -> $s\n" if ($debug); - - $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; -} - -foreach my $r (keys %defines) { - my $s = $defines{$r}; - - $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; - - print "$r -> $s\n" if ($debug); - - $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; -} - -foreach my $r (keys %enum_symbols) { - my $s = $enum_symbols{$r}; - - $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; - - print "$r -> $s\n" if ($debug); - - $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; -} - -foreach my $r (keys %enums) { - my $s = $enums{$r}; - - $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; - - print "$r -> $s\n" if ($debug); - - $data =~ s/enum\s+($r)$end_delim/$s$2/g; -} - -foreach my $r (keys %structs) { - my $s = $structs{$r}; - - $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; - - print "$r -> $s\n" if ($debug); - - $data =~ s/struct\s+($r)$end_delim/$s$2/g; -} - -foreach my $r (keys %typedefs) { - my $s = $typedefs{$r}; - - $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; - - print "$r -> $s\n" if ($debug); - $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; -} - -$data =~ s/\\ ([\n\s])/\1/g; - -# -# Generate output file -# - -my $title = $file_in; -$title =~ s,.*/,,; - -open OUT, "> $file_out" or die "Can't open $file_out"; -print OUT ".. -*- coding: utf-8; mode: rst -*-\n\n"; -print OUT "$title\n"; -print OUT "=" x length($title); -print OUT "\n\n.. parsed-literal::\n\n"; -print OUT $data; -close OUT; - -__END__ - -=head1 NAME - -parse_headers.pl - parse a C file, in order to identify functions, structs, -enums and defines and create cross-references to a Sphinx book. - -=head1 SYNOPSIS - -B [] [] - -Where can be: --debug, --help or --man. - -=head1 OPTIONS - -=over 8 - -=item B<--debug> - -Put the script in verbose mode, useful for debugging. - -=item B<--usage> - -Prints a brief help message and exits. - -=item B<--help> - -Prints a more detailed help message and exits. - -=back - -=head1 DESCRIPTION - -Convert a C header or source file (C_FILE), into a ReStructured Text -included via ..parsed-literal block with cross-references for the -documentation files that describe the API. It accepts an optional -EXCEPTIONS_FILE with describes what elements will be either ignored or -be pointed to a non-default reference. - -The output is written at the (OUT_FILE). - -It is capable of identifying defines, functions, structs, typedefs, -enums and enum symbols and create cross-references for all of them. -It is also capable of distinguish #define used for specifying a Linux -ioctl. - -The EXCEPTIONS_FILE contain two rules to allow ignoring a symbol or -to replace the default references by a custom one. - -Please read Documentation/doc-guide/parse-headers.rst at the Kernel's -tree for more details. - -=head1 BUGS - -Report bugs to Mauro Carvalho Chehab - -=head1 COPYRIGHT - -Copyright (c) 2016 by Mauro Carvalho Chehab . - -License GPLv2: GNU GPL version 2 . - -This is free software: you are free to change and redistribute it. -There is NO WARRANTY, to the extent permitted by law. - -=cut diff --git a/Documentation/sphinx/requirements.txt b/Documentation/sphinx/requirements.txt deleted file mode 100644 index 742be3e126..0000000000 --- a/Documentation/sphinx/requirements.txt +++ /dev/null @@ -1,3 +0,0 @@ -docutils==0.12 -Sphinx==1.4.9 -sphinx_rtd_theme diff --git a/Documentation/sphinx/rstFlatTable.py b/Documentation/sphinx/rstFlatTable.py deleted file mode 100755 index 25feb0d35e..0000000000 --- a/Documentation/sphinx/rstFlatTable.py +++ /dev/null @@ -1,376 +0,0 @@ -#!/usr/bin/env python3 -# -*- coding: utf-8; mode: python -*- -# pylint: disable=C0330, R0903, R0912 - -u""" - flat-table - ~~~~~~~~~~ - - Implementation of the ``flat-table`` reST-directive. - - :copyright: Copyright (C) 2016 Markus Heiser - :license: GPL Version 2, June 1991 see linux/COPYING for details. - - The ``flat-table`` (:py:class:`FlatTable`) is a double-stage list similar to - the ``list-table`` with some additional features: - - * *column-span*: with the role ``cspan`` a cell can be extended through - additional columns - - * *row-span*: with the role ``rspan`` a cell can be extended through - additional rows - - * *auto span* rightmost cell of a table row over the missing cells on the - right side of that table-row. With Option ``:fill-cells:`` this behavior - can changed from *auto span* to *auto fill*, which automaticly inserts - (empty) cells instead of spanning the last cell. - - Options: - - * header-rows: [int] count of header rows - * stub-columns: [int] count of stub columns - * widths: [[int] [int] ... ] widths of columns - * fill-cells: instead of autospann missing cells, insert missing cells - - roles: - - * cspan: [int] additionale columns (*morecols*) - * rspan: [int] additionale rows (*morerows*) -""" - -# ============================================================================== -# imports -# ============================================================================== - -import sys - -from docutils import nodes -from docutils.parsers.rst import directives, roles -from docutils.parsers.rst.directives.tables import Table -from docutils.utils import SystemMessagePropagation - -# ============================================================================== -# common globals -# ============================================================================== - -# The version numbering follows numbering of the specification -# (Documentation/books/kernel-doc-HOWTO). -__version__ = '1.0' - -PY3 = sys.version_info[0] == 3 -PY2 = sys.version_info[0] == 2 - -if PY3: - # pylint: disable=C0103, W0622 - unicode = str - basestring = str - -# ============================================================================== -def setup(app): -# ============================================================================== - - app.add_directive("flat-table", FlatTable) - roles.register_local_role('cspan', c_span) - roles.register_local_role('rspan', r_span) - - return dict( - version = __version__, - parallel_read_safe = True, - parallel_write_safe = True - ) - -# ============================================================================== -def c_span(name, rawtext, text, lineno, inliner, options=None, content=None): -# ============================================================================== - # pylint: disable=W0613 - - options = options if options is not None else {} - content = content if content is not None else [] - nodelist = [colSpan(span=int(text))] - msglist = [] - return nodelist, msglist - -# ============================================================================== -def r_span(name, rawtext, text, lineno, inliner, options=None, content=None): -# ============================================================================== - # pylint: disable=W0613 - - options = options if options is not None else {} - content = content if content is not None else [] - nodelist = [rowSpan(span=int(text))] - msglist = [] - return nodelist, msglist - - -# ============================================================================== -class rowSpan(nodes.General, nodes.Element): pass # pylint: disable=C0103,C0321 -class colSpan(nodes.General, nodes.Element): pass # pylint: disable=C0103,C0321 -# ============================================================================== - -# ============================================================================== -class FlatTable(Table): -# ============================================================================== - - u"""FlatTable (``flat-table``) directive""" - - option_spec = { - 'name': directives.unchanged - , 'class': directives.class_option - , 'header-rows': directives.nonnegative_int - , 'stub-columns': directives.nonnegative_int - , 'widths': directives.positive_int_list - , 'fill-cells' : directives.flag } - - def run(self): - - if not self.content: - error = self.state_machine.reporter.error( - 'The "%s" directive is empty; content required.' % self.name, - nodes.literal_block(self.block_text, self.block_text), - line=self.lineno) - return [error] - - title, messages = self.make_title() - node = nodes.Element() # anonymous container for parsing - self.state.nested_parse(self.content, self.content_offset, node) - - tableBuilder = ListTableBuilder(self) - tableBuilder.parseFlatTableNode(node) - tableNode = tableBuilder.buildTableNode() - # SDK.CONSOLE() # print --> tableNode.asdom().toprettyxml() - if title: - tableNode.insert(0, title) - return [tableNode] + messages - - -# ============================================================================== -class ListTableBuilder(object): -# ============================================================================== - - u"""Builds a table from a double-stage list""" - - def __init__(self, directive): - self.directive = directive - self.rows = [] - self.max_cols = 0 - - def buildTableNode(self): - - colwidths = self.directive.get_column_widths(self.max_cols) - if isinstance(colwidths, tuple): - # Since docutils 0.13, get_column_widths returns a (widths, - # colwidths) tuple, where widths is a string (i.e. 'auto'). - # See https://sourceforge.net/p/docutils/patches/120/. - colwidths = colwidths[1] - stub_columns = self.directive.options.get('stub-columns', 0) - header_rows = self.directive.options.get('header-rows', 0) - - table = nodes.table() - tgroup = nodes.tgroup(cols=len(colwidths)) - table += tgroup - - - for colwidth in colwidths: - colspec = nodes.colspec(colwidth=colwidth) - # FIXME: It seems, that the stub method only works well in the - # absence of rowspan (observed by the html buidler, the docutils-xml - # build seems OK). This is not extraordinary, because there exists - # no table directive (except *this* flat-table) which allows to - # define coexistent of rowspan and stubs (there was no use-case - # before flat-table). This should be reviewed (later). - if stub_columns: - colspec.attributes['stub'] = 1 - stub_columns -= 1 - tgroup += colspec - stub_columns = self.directive.options.get('stub-columns', 0) - - if header_rows: - thead = nodes.thead() - tgroup += thead - for row in self.rows[:header_rows]: - thead += self.buildTableRowNode(row) - - tbody = nodes.tbody() - tgroup += tbody - - for row in self.rows[header_rows:]: - tbody += self.buildTableRowNode(row) - return table - - def buildTableRowNode(self, row_data, classes=None): - classes = [] if classes is None else classes - row = nodes.row() - for cell in row_data: - if cell is None: - continue - cspan, rspan, cellElements = cell - - attributes = {"classes" : classes} - if rspan: - attributes['morerows'] = rspan - if cspan: - attributes['morecols'] = cspan - entry = nodes.entry(**attributes) - entry.extend(cellElements) - row += entry - return row - - def raiseError(self, msg): - error = self.directive.state_machine.reporter.error( - msg - , nodes.literal_block(self.directive.block_text - , self.directive.block_text) - , line = self.directive.lineno ) - raise SystemMessagePropagation(error) - - def parseFlatTableNode(self, node): - u"""parses the node from a :py:class:`FlatTable` directive's body""" - - if len(node) != 1 or not isinstance(node[0], nodes.bullet_list): - self.raiseError( - 'Error parsing content block for the "%s" directive: ' - 'exactly one bullet list expected.' % self.directive.name ) - - for rowNum, rowItem in enumerate(node[0]): - row = self.parseRowItem(rowItem, rowNum) - self.rows.append(row) - self.roundOffTableDefinition() - - def roundOffTableDefinition(self): - u"""Round off the table definition. - - This method rounds off the table definition in :py:member:`rows`. - - * This method inserts the needed ``None`` values for the missing cells - arising from spanning cells over rows and/or columns. - - * recount the :py:member:`max_cols` - - * Autospan or fill (option ``fill-cells``) missing cells on the right - side of the table-row - """ - - y = 0 - while y < len(self.rows): - x = 0 - - while x < len(self.rows[y]): - cell = self.rows[y][x] - if cell is None: - x += 1 - continue - cspan, rspan = cell[:2] - # handle colspan in current row - for c in range(cspan): - try: - self.rows[y].insert(x+c+1, None) - except: # pylint: disable=W0702 - # the user sets ambiguous rowspans - pass # SDK.CONSOLE() - # handle colspan in spanned rows - for r in range(rspan): - for c in range(cspan + 1): - try: - self.rows[y+r+1].insert(x+c, None) - except: # pylint: disable=W0702 - # the user sets ambiguous rowspans - pass # SDK.CONSOLE() - x += 1 - y += 1 - - # Insert the missing cells on the right side. For this, first - # re-calculate the max columns. - - for row in self.rows: - if self.max_cols < len(row): - self.max_cols = len(row) - - # fill with empty cells or cellspan? - - fill_cells = False - if 'fill-cells' in self.directive.options: - fill_cells = True - - for row in self.rows: - x = self.max_cols - len(row) - if x and not fill_cells: - if row[-1] is None: - row.append( ( x - 1, 0, []) ) - else: - cspan, rspan, content = row[-1] - row[-1] = (cspan + x, rspan, content) - elif x and fill_cells: - for i in range(x): - row.append( (0, 0, nodes.comment()) ) - - def pprint(self): - # for debugging - retVal = "[ " - for row in self.rows: - retVal += "[ " - for col in row: - if col is None: - retVal += ('%r' % col) - retVal += "\n , " - else: - content = col[2][0].astext() - if len (content) > 30: - content = content[:30] + "..." - retVal += ('(cspan=%s, rspan=%s, %r)' - % (col[0], col[1], content)) - retVal += "]\n , " - retVal = retVal[:-2] - retVal += "]\n , " - retVal = retVal[:-2] - return retVal + "]" - - def parseRowItem(self, rowItem, rowNum): - row = [] - childNo = 0 - error = False - cell = None - target = None - - for child in rowItem: - if (isinstance(child , nodes.comment) - or isinstance(child, nodes.system_message)): - pass - elif isinstance(child , nodes.target): - target = child - elif isinstance(child, nodes.bullet_list): - childNo += 1 - cell = child - else: - error = True - break - - if childNo != 1 or error: - self.raiseError( - 'Error parsing content block for the "%s" directive: ' - 'two-level bullet list expected, but row %s does not ' - 'contain a second-level bullet list.' - % (self.directive.name, rowNum + 1)) - - for cellItem in cell: - cspan, rspan, cellElements = self.parseCellItem(cellItem) - if target is not None: - cellElements.insert(0, target) - row.append( (cspan, rspan, cellElements) ) - return row - - def parseCellItem(self, cellItem): - # search and remove cspan, rspan colspec from the first element in - # this listItem (field). - cspan = rspan = 0 - if not len(cellItem): - return cspan, rspan, [] - for elem in cellItem[0]: - if isinstance(elem, colSpan): - cspan = elem.get("span") - elem.parent.remove(elem) - continue - if isinstance(elem, rowSpan): - rspan = elem.get("span") - elem.parent.remove(elem) - continue - return cspan, rspan, cellItem[:] diff --git a/MAINTAINERS b/MAINTAINERS index 9046084c4d..bea3122f2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -476,7 +476,7 @@ S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-efi.git F: doc/README.uefi F: doc/README.iscsi -F: Documentation/efi.rst +F: doc/efi.rst F: include/capitalization.h F: include/charset.h F: include/cp1250.h diff --git a/Makefile b/Makefile index 9fba74d3ed..6335834d12 100644 --- a/Makefile +++ b/Makefile @@ -168,7 +168,7 @@ MAKEFLAGS += --no-print-directory # Use 'make C=2' to enable checking of *all* source files, regardless # of whether they are re-compiled or not. # -# See the file "Documentation/sparse.txt" for more details, including +# See the file "doc/sparse.txt" for more details, including # where to get the "sparse" utility. ifeq ("$(origin C)", "command line") @@ -1916,7 +1916,7 @@ help: @echo ' coccicheck - Execute static code analysis with Coccinelle' @echo '' @echo 'Documentation targets:' - @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp + @$(MAKE) -f $(srctree)/doc/Makefile dochelp @echo '' @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' @echo ' make V=2 [targets] 2 => give reason for rebuild of target' @@ -1945,7 +1945,7 @@ DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ linkcheckdocs dochelp refcheckdocs PHONY += $(DOC_TARGETS) $(DOC_TARGETS): scripts_basic FORCE - $(Q)$(MAKE) $(build)=Documentation $@ + $(Q)$(MAKE) $(build)=doc $@ endif #ifeq ($(config-targets),1) endif #ifeq ($(mixed-targets),1) diff --git a/doc/Makefile b/doc/Makefile new file mode 100644 index 0000000000..5135a96e88 --- /dev/null +++ b/doc/Makefile @@ -0,0 +1,124 @@ +# -*- makefile -*- +# Makefile for Sphinx documentation +# + +subdir-y := + +# You can set these variables from the command line. +SPHINXBUILD = sphinx-build +SPHINXOPTS = +SPHINXDIRS = . +_SPHINXDIRS = $(patsubst $(srctree)/doc/%/conf.py,%,$(wildcard $(srctree)/doc/*/conf.py)) +SPHINX_CONF = conf.py +PAPER = +BUILDDIR = $(obj)/output +PDFLATEX = xelatex +LATEXOPTS = -interaction=batchmode + +# User-friendly check for sphinx-build +HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi) + +ifeq ($(HAVE_SPHINX),0) + +.DEFAULT: + $(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.) + @echo + @./scripts/sphinx-pre-install + @echo " SKIP Sphinx $@ target." + +else # HAVE_SPHINX + +# User-friendly check for pdflatex +HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi) + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +KERNELDOC = $(srctree)/scripts/kernel-doc +KERNELDOC_CONF = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC) +ALLSPHINXOPTS = $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +# commands; the 'cmd' from scripts/Kbuild.include is not *loopable* +loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit; + +# $2 sphinx builder e.g. "html" +# $3 name of the build subfolder / e.g. "media", used as: +# * dest folder relative to $(BUILDDIR) and +# * cache folder relative to $(BUILDDIR)/.doctrees +# $4 dest subfolder e.g. "man" for man pages at media/man +# $5 reST source folder relative to $(srctree)/$(src), +# e.g. "media" for the linux-tv book-set at ./doc/media + +quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4) + cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=doc/media $2 && \ + PYTHONDONTWRITEBYTECODE=1 \ + BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \ + $(SPHINXBUILD) \ + -b $2 \ + -c $(abspath $(srctree)/$(src)) \ + -d $(abspath $(BUILDDIR)/.doctrees/$3) \ + -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \ + $(ALLSPHINXOPTS) \ + $(abspath $(srctree)/$(src)/$5) \ + $(abspath $(BUILDDIR)/$3/$4) + +htmldocs: + @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var))) + +linkcheckdocs: + @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var))) + +latexdocs: + @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var))) + +ifeq ($(HAVE_PDFLATEX),0) + +pdfdocs: + $(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.) + @echo " SKIP Sphinx $@ target." + +else # HAVE_PDFLATEX + +pdfdocs: latexdocs + $(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;) + +endif # HAVE_PDFLATEX + +epubdocs: + @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var))) + +xmldocs: + @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var))) + +endif # HAVE_SPHINX + +# The following targets are independent of HAVE_SPHINX, and the rules should +# work or silently pass without Sphinx. + +refcheckdocs: + $(Q)cd $(srctree);scripts/documentation-file-ref-check + +cleandocs: + $(Q)rm -rf $(BUILDDIR) + $(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=doc/media clean + +dochelp: + @echo ' Linux kernel internal documentation in different formats from ReST:' + @echo ' htmldocs - HTML' + @echo ' latexdocs - LaTeX' + @echo ' pdfdocs - PDF' + @echo ' epubdocs - EPUB' + @echo ' xmldocs - XML' + @echo ' linkcheckdocs - check for broken external links (will connect to external hosts)' + @echo ' refcheckdocs - check for references to non-existing files under Documentation' + @echo ' cleandocs - clean all generated files' + @echo + @echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2' + @echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)' + @echo + @echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build' + @echo ' configuration. This is e.g. useful to build with nit-picking config.' + @echo + @echo ' Default location for the generated documents is doc/output' diff --git a/doc/conf.py b/doc/conf.py new file mode 100644 index 0000000000..168c31346b --- /dev/null +++ b/doc/conf.py @@ -0,0 +1,528 @@ +# -*- coding: utf-8 -*- +# +# The U-Boot documentation build configuration file, created by +# sphinx-quickstart on Fri Feb 12 13:51:46 2016. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os +import sphinx + +# Get Sphinx version +major, minor, patch = sphinx.version_info[:3] + + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath('sphinx')) +from load_config import loadConfig + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +needs_sphinx = '1.3' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', 'kfigure'] + +# The name of the math extension changed on Sphinx 1.4 +if major == 1 and minor > 3: + extensions.append("sphinx.ext.imgmath") +else: + extensions.append("sphinx.ext.pngmath") + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix(es) of source filenames. +# You can specify multiple suffix as a list of string: +# source_suffix = ['.rst', '.md'] +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = 'Das U-Boot' +copyright = 'The U-Boot development community' +author = 'The U-Boot development community' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# In a normal build, version and release are are set to KERNELVERSION and +# KERNELRELEASE, respectively, from the Makefile via Sphinx command line +# arguments. +# +# The following code tries to extract the information by reading the Makefile, +# when Sphinx is run directly (e.g. by Read the Docs). +try: + makefile_version = None + makefile_patchlevel = None + for line in open('../Makefile'): + key, val = [x.strip() for x in line.split('=', 2)] + if key == 'VERSION': + makefile_version = val + elif key == 'PATCHLEVEL': + makefile_patchlevel = val + if makefile_version and makefile_patchlevel: + break +except: + pass +finally: + if makefile_version and makefile_patchlevel: + version = release = makefile_version + '.' + makefile_patchlevel + else: + version = release = "unknown version" + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# +# This is also used if you do content translation via gettext catalogs. +# Usually you set "language" from the command line for these cases. +language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['output'] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +#default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = False + +primary_domain = 'c' +highlight_language = 'none' + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. + +# The Read the Docs theme is available from +# - https://github.com/snide/sphinx_rtd_theme +# - https://pypi.python.org/pypi/sphinx_rtd_theme +# - python-sphinx-rtd-theme package (on Debian) +try: + import sphinx_rtd_theme + html_theme = 'sphinx_rtd_theme' + html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] +except ImportError: + sys.stderr.write('Warning: The Sphinx \'sphinx_rtd_theme\' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.\n') + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". + +html_static_path = ['sphinx-static'] + +html_context = { + 'css_files': [ + '_static/theme_overrides.css', + ], +} + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Language to be used for generating the HTML full-text search index. +# Sphinx supports the following languages: +# 'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja' +# 'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr' +#html_search_language = 'en' + +# A dictionary with options for the search language support, empty by default. +# Now only 'ja' uses this config value +#html_search_options = {'type': 'default'} + +# The name of a javascript file (relative to the configuration directory) that +# implements a search results scorer. If empty, the default will be used. +#html_search_scorer = 'scorer.js' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'TheUBootdoc' + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +'papersize': 'a4paper', + +# The font size ('10pt', '11pt' or '12pt'). +'pointsize': '8pt', + +# Latex figure (float) alignment +#'figure_align': 'htbp', + +# Don't mangle with UTF-8 chars +'inputenc': '', +'utf8extra': '', + +# Additional stuff for the LaTeX preamble. + 'preamble': ''' + % Use some font with UTF-8 support with XeLaTeX + \\usepackage{fontspec} + \\setsansfont{DejaVu Serif} + \\setromanfont{DejaVu Sans} + \\setmonofont{DejaVu Sans Mono} + + ''' +} + +# Fix reference escape troubles with Sphinx 1.4.x +if major == 1 and minor > 3: + latex_elements['preamble'] += '\\renewcommand*{\\DUrole}[2]{ #2 }\n' + +if major == 1 and minor <= 4: + latex_elements['preamble'] += '\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}' +elif major == 1 and (minor > 5 or (minor == 5 and patch >= 3)): + latex_elements['sphinxsetup'] = 'hmargin=0.5in, vmargin=1in' + latex_elements['preamble'] += '\\fvset{fontsize=auto}\n' + +# Customize notice background colors on Sphinx < 1.6: +if major == 1 and minor < 6: + latex_elements['preamble'] += ''' + \\usepackage{ifthen} + + % Put notes in color and let them be inside a table + \\definecolor{NoteColor}{RGB}{204,255,255} + \\definecolor{WarningColor}{RGB}{255,204,204} + \\definecolor{AttentionColor}{RGB}{255,255,204} + \\definecolor{ImportantColor}{RGB}{192,255,204} + \\definecolor{OtherColor}{RGB}{204,204,204} + \\newlength{\\mynoticelength} + \\makeatletter\\newenvironment{coloredbox}[1]{% + \\setlength{\\fboxrule}{1pt} + \\setlength{\\fboxsep}{7pt} + \\setlength{\\mynoticelength}{\\linewidth} + \\addtolength{\\mynoticelength}{-2\\fboxsep} + \\addtolength{\\mynoticelength}{-2\\fboxrule} + \\begin{lrbox}{\\@tempboxa}\\begin{minipage}{\\mynoticelength}}{\\end{minipage}\\end{lrbox}% + \\ifthenelse% + {\\equal{\\py@noticetype}{note}}% + {\\colorbox{NoteColor}{\\usebox{\\@tempboxa}}}% + {% + \\ifthenelse% + {\\equal{\\py@noticetype}{warning}}% + {\\colorbox{WarningColor}{\\usebox{\\@tempboxa}}}% + {% + \\ifthenelse% + {\\equal{\\py@noticetype}{attention}}% + {\\colorbox{AttentionColor}{\\usebox{\\@tempboxa}}}% + {% + \\ifthenelse% + {\\equal{\\py@noticetype}{important}}% + {\\colorbox{ImportantColor}{\\usebox{\\@tempboxa}}}% + {\\colorbox{OtherColor}{\\usebox{\\@tempboxa}}}% + }% + }% + }% + }\\makeatother + + \\makeatletter + \\renewenvironment{notice}[2]{% + \\def\\py@noticetype{#1} + \\begin{coloredbox}{#1} + \\bf\\it + \\par\\strong{#2} + \\csname py@noticestart@#1\\endcsname + } + { + \\csname py@noticeend@\\py@noticetype\\endcsname + \\end{coloredbox} + } + \\makeatother + + ''' + +# With Sphinx 1.6, it is possible to change the Bg color directly +# by using: +# \definecolor{sphinxnoteBgColor}{RGB}{204,255,255} +# \definecolor{sphinxwarningBgColor}{RGB}{255,204,204} +# \definecolor{sphinxattentionBgColor}{RGB}{255,255,204} +# \definecolor{sphinximportantBgColor}{RGB}{192,255,204} +# +# However, it require to use sphinx heavy box with: +# +# \renewenvironment{sphinxlightbox} {% +# \\begin{sphinxheavybox} +# } +# \\end{sphinxheavybox} +# } +# +# Unfortunately, the implementation is buggy: if a note is inside a +# table, it isn't displayed well. So, for now, let's use boring +# black and white notes. + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +# Sorted in alphabetical order +latex_documents = [ + ('index', 'u-boot-hacker-manual.tex', 'U-Boot Hacker Manual', + 'The U-Boot development community', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + (master_doc, 'dasuboot', 'The U-Boot Documentation', + [author], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + (master_doc, 'DasUBoot', 'The U-Boot Documentation', + author, 'DasUBoot', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False + + +# -- Options for Epub output ---------------------------------------------- + +# Bibliographic Dublin Core info. +epub_title = project +epub_author = author +epub_publisher = author +epub_copyright = copyright + +# The basename for the epub file. It defaults to the project name. +#epub_basename = project + +# The HTML theme for the epub output. Since the default themes are not +# optimized for small screen space, using the same theme for HTML and epub +# output is usually not wise. This defaults to 'epub', a theme designed to save +# visual space. +#epub_theme = 'epub' + +# The language of the text. It defaults to the language option +# or 'en' if the language is not set. +#epub_language = '' + +# The scheme of the identifier. Typical schemes are ISBN or URL. +#epub_scheme = '' + +# The unique identifier of the text. This can be a ISBN number +# or the project homepage. +#epub_identifier = '' + +# A unique identification for the text. +#epub_uid = '' + +# A tuple containing the cover image and cover page html template filenames. +#epub_cover = () + +# A sequence of (type, uri, title) tuples for the guide element of content.opf. +#epub_guide = () + +# HTML files that should be inserted before the pages created by sphinx. +# The format is a list of tuples containing the path and title. +#epub_pre_files = [] + +# HTML files that should be inserted after the pages created by sphinx. +# The format is a list of tuples containing the path and title. +#epub_post_files = [] + +# A list of files that should not be packed into the epub file. +epub_exclude_files = ['search.html'] + +# The depth of the table of contents in toc.ncx. +#epub_tocdepth = 3 + +# Allow duplicate toc entries. +#epub_tocdup = True + +# Choose between 'default' and 'includehidden'. +#epub_tocscope = 'default' + +# Fix unsupported image types using the Pillow. +#epub_fix_images = False + +# Scale large images. +#epub_max_image_width = 0 + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#epub_show_urls = 'inline' + +# If false, no index is generated. +#epub_use_index = True + +#======= +# rst2pdf +# +# Grouping the document tree into PDF files. List of tuples +# (source start file, target name, title, author, options). +# +# See the Sphinx chapter of http://ralsina.me/static/manual.pdf +# +# FIXME: Do not add the index file here; the result will be too big. Adding +# multiple PDF files here actually tries to get the cross-referencing right +# *between* PDF files. +pdf_documents = [ + ('uboot-documentation', u'U-Boot', u'U-Boot', u'J. Random Bozo'), +] + +# kernel-doc extension configuration for running Sphinx directly (e.g. by Read +# the Docs). In a normal build, these are supplied from the Makefile via command +# line arguments. +kerneldoc_bin = '../scripts/kernel-doc' +kerneldoc_srctree = '..' + +# ------------------------------------------------------------------------------ +# Since loadConfig overwrites settings from the global namespace, it has to be +# the last statement in the conf.py file +# ------------------------------------------------------------------------------ +loadConfig(globals()) diff --git a/doc/device-tree-bindings/arm/l2c2x0.txt b/doc/device-tree-bindings/arm/l2c2x0.txt new file mode 100644 index 0000000000..fbe6cb21f4 --- /dev/null +++ b/doc/device-tree-bindings/arm/l2c2x0.txt @@ -0,0 +1,114 @@ +* ARM L2 Cache Controller + +ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/ +PL310 and variants) based level 2 cache controller. All these various implementations +of the L2 cache controller have compatible programming models (Note 1). +Some of the properties that are just prefixed "cache-*" are taken from section +3.7.3 of the Devicetree Specification which can be found at: +https://www.devicetree.org/specifications/ + +The ARM L2 cache representation in the device tree should be done as follows: + +Required properties: + +- compatible : should be one of: + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" + "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an + offset needs to be added to the address before passing down to the L2 + cache controller + "marvell,aurora-system-cache": Marvell Controller designed to be + compatible with the ARM one, with system cache mode (meaning + maintenance operations on L1 are broadcasted to the L2 and L2 + performs the same operation). + "marvell,aurora-outer-cache": Marvell Controller designed to be + compatible with the ARM one with outer cache mode. + "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible + with arm,pl310-cache controller. +- cache-unified : Specifies the cache is a unified cache. +- cache-level : Should be set to 2 for a level 2 cache. +- reg : Physical base address and size of cache controller's memory mapped + registers. + +Optional properties: + +- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. +- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. +- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. +- arm,filter-ranges : Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. +- arm,io-coherent : indicates that the system is operating in an hardware + I/O coherent mode. Valid only when the arm,pl310-cache compatible + string is used. +- interrupts : 1 combined interrupt. +- cache-size : specifies the size in bytes of the cache +- cache-sets : specifies the number of associativity sets of the cache +- cache-block-size : specifies the size in bytes of a cache block +- cache-line-size : specifies the size in bytes of a line in the cache, + if this is not specified, the line size is assumed to be equal to the + cache block size +- cache-id-part: cache id part number to be used if it is not present + on hardware +- wt-override: If present then L2 is forced to Write through mode +- arm,double-linefill : Override double linefill enable setting. Enable if + non-zero, disable if zero. +- arm,double-linefill-incr : Override double linefill on INCR read. Enable + if non-zero, disable if zero. +- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable + if non-zero, disable if zero. +- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero, + disable if zero. +- arm,prefetch-offset : Override prefetch offset value. Valid values are + 0-7, 15, 23, and 31. +- arm,shared-override : The default behavior of the L220 or PL310 cache + controllers with respect to the shareable attribute is to transform "normal + memory non-cacheable transactions" into "cacheable no allocate" (for reads) + or "write through no write allocate" (for writes). + On systems where this may cause DMA buffer corruption, this property must be + specified to indicate that such transforms are precluded. +- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310). +- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310). +- arm,outer-sync-disable : disable the outer sync operation on the L2 cache. + Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that + will randomly hang unless outer sync operations are disabled. +- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> + (forcibly enable), property absent (retain settings set by firmware) +- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) +- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly + disable), <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) +- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable), + <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) +- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310) +- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero + write (PL310) + +Example: + +L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; + interrupts = <45>; +}; + +Note 1: The description in this document doesn't apply to integrated L2 + cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These + integrated L2 controllers are assumed to be all preconfigured by + early secure boot code. Thus no need to deal with their configuration + in the kernel at all. diff --git a/doc/device-tree-bindings/axi/gdsys,ihs_axi.txt b/doc/device-tree-bindings/axi/gdsys,ihs_axi.txt new file mode 100644 index 0000000000..110788fa91 --- /dev/null +++ b/doc/device-tree-bindings/axi/gdsys,ihs_axi.txt @@ -0,0 +1,22 @@ +gdsys AXI busses of IHS FPGA devices + +Certain gdsys IHS FPGAs offer a interface to their built-in AXI bus with which +the connected devices (usually IP cores) can be controlled via software. + +Required properties: +- compatible: must be "gdsys,ihs_axi" +- reg: describes the address and length of the AXI bus's register map (within + the FPGA's register space) + +Example: + +fpga0_axi_video0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x170 0x10>; + + axi_dev_1 { + ... + }; +}; diff --git a/doc/device-tree-bindings/board/gdsys,board_gazerbeam.txt b/doc/device-tree-bindings/board/gdsys,board_gazerbeam.txt new file mode 100644 index 0000000000..28c1080d90 --- /dev/null +++ b/doc/device-tree-bindings/board/gdsys,board_gazerbeam.txt @@ -0,0 +1,46 @@ +gdsys Gazerbeam board driver + +This driver provides capabilities to access the gdsys Gazerbeam board's device +information. Furthermore, phandles to some internal devices are provided for +the board files. + +Required properties: +- compatible: should be "gdsys,board_gazerbeam" +- csb: phandle to the board's coherent system bus (CSB) device node +- rxaui[0-3]: phandles to the rxaui control device nodes +- fpga[0-1]: phandles to the board's gdsys FPGA device nodes +- ioep[0-1]: phandles to the board's IO endpoint device nodes +- ver-gpios: GPIO list to read the hardware version from +- var-gpios: GPIO list to read the hardware variant information from +- reset-gpios: GPIO list for the board's reset GPIOs + +Example: + + +board { + compatible = "gdsys,board_gazerbeam"; + csb = <&board_soc>; + serdes = <&SERDES>; + rxaui0 = <&RXAUI0>; + rxaui1 = <&RXAUI1>; + rxaui2 = <&RXAUI2>; + rxaui3 = <&RXAUI3>; + fpga0 = <&FPGA0>; + fpga1 = <&FPGA1>; + ioep0 = <&IOEP0>; + ioep1 = <&IOEP1>; + + ver-gpios = <&PPCPCA 12 0 + &PPCPCA 13 0 + &PPCPCA 14 0 + &PPCPCA 15 0>; + + /* MC2/SC-Board */ + var-gpios-mc2 = <&GPIO_VB0 0 0 /* VAR-MC_SC */ + &GPIO_VB0 11 0>; /* VAR-CON */ + /* MC4-Board */ + var-gpios-mc4 = <&GPIO_VB1 0 0 /* VAR-MC_SC */ + &GPIO_VB1 11 0>; /* VAR-CON */ + + reset-gpios = <&gpio0 1 0 &gpio0 2 1>; +}; diff --git a/doc/device-tree-bindings/clock/fsl,mpc83xx-clk.txt b/doc/device-tree-bindings/clock/fsl,mpc83xx-clk.txt new file mode 100644 index 0000000000..8313da8507 --- /dev/null +++ b/doc/device-tree-bindings/clock/fsl,mpc83xx-clk.txt @@ -0,0 +1,23 @@ +MPC83xx system clock devices + +MPC83xx SoCs supply a variety of clocks to drive various components of a +system. + +Required properties: +- compatible: must be one of "fsl,mpc8308-clk", + "fsl,mpc8309-clk", + "fsl,mpc8313-clk", + "fsl,mpc8315-clk", + "fsl,mpc832x-clk", + "fsl,mpc8349-clk", + "fsl,mpc8360-clk", + "fsl,mpc8379-clk" + depending on which SoC is employed +- #clock-cells: Must be 1 + +Example: + +socclocks: clocks { + compatible = "fsl,mpc832x-clk"; + #clock-cells = <1>; +}; diff --git a/doc/device-tree-bindings/cpu/fsl,mpc83xx.txt b/doc/device-tree-bindings/cpu/fsl,mpc83xx.txt new file mode 100644 index 0000000000..ac563d906a --- /dev/null +++ b/doc/device-tree-bindings/cpu/fsl,mpc83xx.txt @@ -0,0 +1,34 @@ +MPC83xx CPU devices + +MPC83xx SoCs contain a e300 core as their main processor. + +Required properties: +- compatible: must be one of "fsl,mpc83xx", + "fsl,mpc8308", + "fsl,mpc8309", + "fsl,mpc8313", + "fsl,mpc8315", + "fsl,mpc832x", + "fsl,mpc8349", + "fsl,mpc8360", + "fsl,mpc8379" +- clocks: has to have two entries, which must be the core clock at index 0 and + the CSB (Coherent System Bus) clock at index 1. Both are given by a suitable + "fsl,mpc83xx-clk" device + +Example: + +socclocks: clocks { + compatible = "fsl,mpc8315-clk"; + #clock-cells = <1>; +}; + +cpus { + compatible = "cpu_bus"; + + PowerPC,8315@0 { + compatible = "fsl,mpc8315"; + clocks = <&socclocks MPC83XX_CLK_CORE + &socclocks MPC83XX_CLK_CSB>; + }; +}; diff --git a/doc/device-tree-bindings/misc/misc/fsl,mpc83xx-serdes.txt b/doc/device-tree-bindings/misc/misc/fsl,mpc83xx-serdes.txt new file mode 100644 index 0000000000..64a9b5b154 --- /dev/null +++ b/doc/device-tree-bindings/misc/misc/fsl,mpc83xx-serdes.txt @@ -0,0 +1,24 @@ +MPC83xx SerDes controller devices + +MPC83xx SoCs contain a built-in SerDes controller that determines which +protocols (SATA, PCI Express, SGMII, ...) are used on the system's serdes lines +and how the lines are configured. + +Required properties: +- compatible: must be "fsl,mpc83xx-serdes" +- reg: must point to the serdes controller's register map +- proto: selects for which protocol the serdes lines are configured. One of + "sata", "pex", "pex-x2", "sgmii" +- serdes-clk: determines the frequency the serdes lines are configured for. One + of 100, 125, 150. +- vdd: determines whether 1.0V core VDD is used or not + +Example: + +SERDES: serdes@e3000 { + reg = <0xe3000 0x200>; + compatible = "fsl,mpc83xx-serdes"; + proto = "pex"; + serdes-clk = <100>; + vdd; +}; diff --git a/doc/device-tree-bindings/misc/misc/gdsys,io-endpoint.txt b/doc/device-tree-bindings/misc/misc/gdsys,io-endpoint.txt new file mode 100644 index 0000000000..db2ff8ca12 --- /dev/null +++ b/doc/device-tree-bindings/misc/misc/gdsys,io-endpoint.txt @@ -0,0 +1,20 @@ +gdsys IO endpoint of IHS FPGA devices + +The IO endpoint of IHS FPGA devices is a packet-based transmission interface +that allows interconnected gdsys devices to send and receive data over the +FPGA's main ethernet connection. + +Required properties: +- compatible: must be "gdsys,io-endpoint" +- reg: describes the address and length of the endpoint's register map (within + the FPGA's register space) + +Example: + +fpga0_ep0 { + compatible = "gdsys,io-endpoint"; + reg = <0x020 0x10 + 0x320 0x10 + 0x340 0x10 + 0x360 0x10>; +}; diff --git a/doc/device-tree-bindings/misc/misc/gdsys,iocon_fpga.txt b/doc/device-tree-bindings/misc/misc/gdsys,iocon_fpga.txt new file mode 100644 index 0000000000..acd466fdc6 --- /dev/null +++ b/doc/device-tree-bindings/misc/misc/gdsys,iocon_fpga.txt @@ -0,0 +1,19 @@ +gdsys IHS FPGA for CON devices + +The gdsys IHS FPGA is the main FPGA on gdsys CON devices. This driver provides +support for enabling and starting the FPGA, as well as verifying working bus +communication. + +Required properties: +- compatible: must be "gdsys,iocon_fpga" +- reset-gpios: List of GPIOs controlling the FPGA's reset +- done-gpios: List of GPIOs notifying whether the FPGA's reconfiguration is + done + +Example: + +FPGA0 { + compatible = "gdsys,iocon_fpga"; + reset-gpios = <&PPCPCA 26 0>; + done-gpios = <&GPIO_VB0 19 0>; +}; diff --git a/doc/device-tree-bindings/misc/misc/gdsys,iocpu_fpga.txt b/doc/device-tree-bindings/misc/misc/gdsys,iocpu_fpga.txt new file mode 100644 index 0000000000..819db22bf7 --- /dev/null +++ b/doc/device-tree-bindings/misc/misc/gdsys,iocpu_fpga.txt @@ -0,0 +1,19 @@ +gdsys IHS FPGA for CPU devices + +The gdsys IHS FPGA is the main FPGA on gdsys CPU devices. This driver provides +support for enabling and starting the FPGA, as well as verifying working bus +communication. + +Required properties: +- compatible: must be "gdsys,iocpu_fpga" +- reset-gpios: List of GPIOs controlling the FPGA's reset +- done-gpios: List of GPIOs notifying whether the FPGA's reconfiguration is + done + +Example: + +FPGA0 { + compatible = "gdsys,iocpu_fpga"; + reset-gpios = <&PPCPCA 26 0>; + done-gpios = <&GPIO_VB0 19 0>; +}; diff --git a/doc/device-tree-bindings/misc/misc/gdsys,soc.txt b/doc/device-tree-bindings/misc/misc/gdsys,soc.txt new file mode 100644 index 0000000000..278e935b16 --- /dev/null +++ b/doc/device-tree-bindings/misc/misc/gdsys,soc.txt @@ -0,0 +1,16 @@ +gdsys soc bus driver + +This driver provides a simple interface for the busses associated with gdsys +IHS FPGAs. The bus itself contains devices whose register maps are contained +within the FPGA's register space. + +Required properties: +- fpga: A phandle to the controlling IHS FPGA + +Example: + +FPGA0BUS: fpga0bus { + compatible = "gdsys,soc"; + ranges = <0x0 0xe0600000 0x00004000>; + fpga = <&FPGA0>; +}; diff --git a/doc/device-tree-bindings/ram/fsl,mpc83xx-mem-controller.txt b/doc/device-tree-bindings/ram/fsl,mpc83xx-mem-controller.txt new file mode 100644 index 0000000000..da01fe908d --- /dev/null +++ b/doc/device-tree-bindings/ram/fsl,mpc83xx-mem-controller.txt @@ -0,0 +1,314 @@ +MPC83xx RAM controller + +This driver supplies support for the embedded RAM controller on MCP83xx-series +SoCs. + +For static configuration mode, each controller node should have child nodes +describing the actual RAM modules installed. + +Controller node +=============== + +Required properties: +- compatible: Must be "fsl,mpc83xx-mem-controller" +- reg: The address of the RAM controller's register space +- #address-cells: Must be 2 +- #size-cells: Must be 1 +- driver_software_override: DDR driver software override is enabled (1) or + disabled (0) +- p_impedance_override: DDR driver software p-impedance override; possible + values: + * DSO_P_IMPEDANCE_HIGHEST_Z + * DSO_P_IMPEDANCE_MUCH_HIGHER_Z + * DSO_P_IMPEDANCE_HIGHER_Z + * DSO_P_IMPEDANCE_NOMINAL + * DSO_P_IMPEDANCE_LOWER_Z +- n_impedance_override: DDR driver software n-impedance override; possible + values: + * DSO_N_IMPEDANCE_HIGHEST_Z + * DSO_N_IMPEDANCE_MUCH_HIGHER_Z + * DSO_N_IMPEDANCE_HIGHER_Z + * DSO_N_IMPEDANCE_NOMINAL + * DSO_N_IMPEDANCE_LOWER_Z +- odt_termination_value: ODT termination value for I/Os; possible values: + * ODT_TERMINATION_75_OHM + * ODT_TERMINATION_150_OHM +- ddr_type: Selects voltage level for DDR pads; possible + values: + * DDR_TYPE_DDR2_1_8_VOLT + * DDR_TYPE_DDR1_2_5_VOLT +- mvref_sel: Determine where MVREF_SEL signal is generated; + possible values: + * MVREF_SEL_EXTERNAL + * MVREF_SEL_INTERNAL_GVDD +- m_odr: Disable memory transaction reordering; possible + values: + * M_ODR_ENABLE + * M_ODR_DISABLE +- clock_adjust: Clock adjust; possible values: + * CLOCK_ADJUST_025 + * CLOCK_ADJUST_05 + * CLOCK_ADJUST_075 + * CLOCK_ADJUST_1 +- ext_refresh_rec: Extended refresh recovery time; possible values: + 0, 16, 32, 48, 64, 80, 96, 112 +- read_to_write: Read-to-write turnaround; possible values: + 0, 1, 2, 3 +- write_to_read: Write-to-read turnaround; possible values: + 0, 1, 2, 3 +- read_to_read: Read-to-read turnaround; possible values: + 0, 1, 2, 3 +- write_to_write: Write-to-write turnaround; possible values: + 0, 1, 2, 3 +- active_powerdown_exit: Active powerdown exit timing; possible values: + 1, 2, 3, 4, 5, 6, 7 +- precharge_powerdown_exit: Precharge powerdown exit timing; possible values: + 1, 2, 3, 4, 5, 6, 7 +- odt_powerdown_exit: ODT powerdown exit timing; possible values: + 0, 1, 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, 15 +- mode_reg_set_cycle: Mode register set cycle time; possible values: + 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 +- precharge_to_activate: Precharge-to-acitvate interval; possible values: + 1, 2, 3, 4, 5, 6, 7 +- activate_to_precharge: Activate to precharge interval; possible values: + 4, 5, 6, 7, 8, 9, 10, 11, 12, + 13, 14, 15, 16, 17, 18, 19 +- activate_to_readwrite: Activate to read/write interval for SDRAM; + possible values: + 1, 2, 3, 4, 5, 6, 7 +- mcas_latency: MCAS latency from READ command; possible values: + * CASLAT_20 + * CASLAT_25 + * CASLAT_30 + * CASLAT_35 + * CASLAT_40 + * CASLAT_45 + * CASLAT_50 + * CASLAT_55 + * CASLAT_60 + * CASLAT_65 + * CASLAT_70 + * CASLAT_75 + * CASLAT_80 +- refresh_recovery: Refresh recovery time; possible values: + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23 +- last_data_to_precharge: Last data to precharge minimum interval; possible + values: + 1, 2, 3, 4, 5, 6, 7 +- activate_to_activate: Activate-to-activate interval; possible values: + 1, 2, 3, 4, 5, 6, 7 +- last_write_data_to_read: Last write data pair to read command issue + interval; possible values: + 1, 2, 3, 4, 5, 6, 7 +- additive_latency: Additive latency; possible values: + 0, 1, 2, 3, 4, 5 +- mcas_to_preamble_override: MCAS-to-preamble-override; possible values: + * READ_LAT + * READ_LAT_PLUS_1_4 + * READ_LAT_PLUS_1_2 + * READ_LAT_PLUS_3_4 + * READ_LAT_PLUS_1 + * READ_LAT_PLUS_5_4 + * READ_LAT_PLUS_3_2 + * READ_LAT_PLUS_7_4 + * READ_LAT_PLUS_2 + * READ_LAT_PLUS_9_4 + * READ_LAT_PLUS_5_2 + * READ_LAT_PLUS_11_4 + * READ_LAT_PLUS_3 + * READ_LAT_PLUS_13_4 + * READ_LAT_PLUS_7_2 + * READ_LAT_PLUS_15_4 + * READ_LAT_PLUS_4 + * READ_LAT_PLUS_17_4 + * READ_LAT_PLUS_9_2 + * READ_LAT_PLUS_19_4 +- write_latency: Write latency; possible values: + 1, 2, 3, 4, 5, 6, 7 +- read_to_precharge: Read to precharge; possible values: + 1, 2, 3, 4 +- write_cmd_to_write_data: Write command to write data strobe timing + adjustment; possible values: + * CLOCK_DELAY_0 + * CLOCK_DELAY_1_4 + * CLOCK_DELAY_1_2 + * CLOCK_DELAY_3_4 + * CLOCK_DELAY_1 + * CLOCK_DELAY_5_4 + * CLOCK_DELAY_3_2 +- minimum_cke_pulse_width: Minimum CKE pulse width; possible values: + 1, 2, 3, 4 +- four_activates_window: Window for four activates; possible values: + 1, 2, 3, 4 8, 9, 10, 11, 12, + 13, 14, 15, 16, 17, 18, 19 +- self_refresh: Self refresh (during sleep); possible values: + * SREN_DISABLE + * SREN_ENABLE +- ecc: Support for ECC; possible values: + * ECC_DISABLE + * ECC_ENABLE +- registered_dram: Support for registered DRAM; possible values: + * RD_DISABLE + * RD_ENABLE +- sdram_type: Type of SDRAM device to be used; possible values: + * TYPE_DDR1 + * TYPE_DDR2 +- dynamic_power_management: Dynamic power management mode; possible values: + * DYN_PWR_DISABLE + * DYN_PWR_ENABLE +- databus_width: DRAM data bus width; possible values + * DATA_BUS_WIDTH_16 + * DATA_BUS_WIDTH_32 +- nc_auto_precharge: Non-concurrent auto-precharge; possible values: + * NCAP_DISABLE + * NCAP_ENABLE +- timing_2t: 2T timing; possible values: + * TIMING_1T + * TIMING_2T +- bank_interleaving_ctrl: Bank (chip select) interleaving control; possible + values: + * INTERLEAVE_NONE + * INTERLEAVE_1_AND_2 +- precharge_bit_8: Precharge bin 8; possible values + * PRECHARGE_MA_10 + * PRECHARGE_MA_8 +- half_strength: Global half-strength override; possible values: + * STRENGTH_FULL + * STRENGTH_HALF +- bypass_initialization: Bypass initialization; possible values: + * INITIALIZATION_DONT_BYPASS + * INITIALIZATION_BYPASS +- force_self_refresh: Force self refresh; possible values: + * MODE_NORMAL + * MODE_REFRESH +- dll_reset: DLL reset; possible values: + * DLL_RESET_ENABLE + * DLL_RESET_DISABLE +- dqs_config: DQS configuration; possible values: + * DQS_TRUE +- odt_config: ODT configuration; possible values: + * ODT_ASSERT_NEVER + * ODT_ASSERT_WRITES + * ODT_ASSERT_READS + * ODT_ASSERT_ALWAYS +- posted_refreshes: Number of posted refreshes + 1, 2, 3, 4, 5, 6, 7, 8 +- sdmode: Initial value loaded into the DDR SDRAM mode + register +- esdmode: Initial value loaded into the DDR SDRAM extended + mode register +- esdmode2: Initial value loaded into the DDR SDRAM extended + mode 2 register +- esdmode3: Initial value loaded into the DDR SDRAM extended + mode 3 register +- refresh_interval: Refresh interval; possible values: + 0 - 65535 +- precharge_interval: Precharge interval; possible values: + 0 - 16383 + +RAM module node: +================ + +Required properties: +- reg: A triple , which consists of: + * cs - the chipselect used to drive this RAM module + * addr - the address where this RAM module's memory is map + to in the global memory space + * size - the size of the RAM module's memory in bytes +- auto_precharge: Chip select auto-precharge; possible values: + * AUTO_PRECHARGE_ENABLE + * AUTO_PRECHARGE_DISABLE +- odt_rd_cfg: ODT for reads configuration; possible values: + * ODT_RD_NEVER + * ODT_RD_ONLY_CURRENT + * ODT_RD_ONLY_OTHER_CS + * ODT_RD_ONLY_OTHER_DIMM + * ODT_RD_ALL +- odt_wr_cfg: ODT for writes configuration; possible values: + * ODT_WR_NEVER + * ODT_WR_ONLY_CURRENT + * ODT_WR_ONLY_OTHER_CS + * ODT_WR_ONLY_OTHER_DIMM + * ODT_WR_ALL +- bank_bits: Number of bank bits for SDRAM on chip select; possible + values: + 2, 3 +- row_bits: Number of row bits for SDRAM on chip select; possible values: + 12, 13, 14 +- col_bits: Number of column bits for SDRAM on chip select; possible + values: + 8, 9, 10, 11 + +Example: + +memory@2000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc83xx-mem-controller"; + reg = <0x2000 0x1000>; + device_type = "memory"; + u-boot,dm-pre-reloc; + + driver_software_override = ; + p_impedance_override = ; + n_impedance_override = ; + odt_termination_value = ; + ddr_type = ; + + clock_adjust = ; + + read_to_write = <0>; + write_to_read = <0>; + read_to_read = <0>; + write_to_write = <0>; + active_powerdown_exit = <2>; + precharge_powerdown_exit = <6>; + odt_powerdown_exit = <8>; + mode_reg_set_cycle = <2>; + + precharge_to_activate = <2>; + activate_to_precharge = <6>; + activate_to_readwrite = <2>; + mcas_latency = ; + refresh_recovery = <17>; + last_data_to_precharge = <2>; + activate_to_activate = <2>; + last_write_data_to_read = <2>; + + additive_latency = <0>; + mcas_to_preamble_override = ; + write_latency = <3>; + read_to_precharge = <2>; + write_cmd_to_write_data = ; + minimum_cke_pulse_width = <3>; + four_activates_window = <5>; + + self_refresh = ; + sdram_type = ; + databus_width = ; + + force_self_refresh = ; + dll_reset = ; + dqs_config = ; + odt_config = ; + posted_refreshes = <1>; + + refresh_interval = <2084>; + precharge_interval = <256>; + + sdmode = <0x0242>; + esdmode = <0x0440>; + + ram@0 { + reg = <0x0 0x0 0x8000000>; + compatible = "nanya,nt5tu64m16hg"; + + odt_rd_cfg = ; + odt_wr_cfg = ; + bank_bits = <3>; + row_bits = <13>; + col_bits = <10>; + }; +}; diff --git a/doc/device-tree-bindings/reserved-memory/reserved-memory.txt b/doc/device-tree-bindings/reserved-memory/reserved-memory.txt new file mode 100644 index 0000000000..bac4afa3b1 --- /dev/null +++ b/doc/device-tree-bindings/reserved-memory/reserved-memory.txt @@ -0,0 +1,136 @@ +*** Reserved memory regions *** + +Reserved memory is specified as a node under the /reserved-memory node. +The operating system shall exclude reserved memory from normal usage +one can create child nodes describing particular reserved (excluded from +normal use) memory regions. Such memory regions are usually designed for +the special usage by various device drivers. + +Parameters for each memory region can be encoded into the device tree +with the following nodes: + +/reserved-memory node +--------------------- +#address-cells, #size-cells (required) - standard definition + - Should use the same values as the root node +ranges (required) - standard definition + - Should be empty + +/reserved-memory/ child nodes +----------------------------- +Each child of the reserved-memory node specifies one or more regions of +reserved memory. Each child node may either use a 'reg' property to +specify a specific range of reserved memory, or a 'size' property with +optional constraints to request a dynamically allocated block of memory. + +Following the generic-names recommended practice, node names should +reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit +address (@
) should be appended to the name if the node is a +static allocation. + +Properties: +Requires either a) or b) below. +a) static allocation + reg (required) - standard definition +b) dynamic allocation + size (required) - length based on parent's #size-cells + - Size in bytes of memory to reserve. + alignment (optional) - length based on parent's #size-cells + - Address boundary for alignment of allocation. + alloc-ranges (optional) - prop-encoded-array (address, length pairs). + - Specifies regions of memory that are + acceptable to allocate from. + +If both reg and size are present, then the reg property takes precedence +and size is ignored. + +Additional properties: +compatible (optional) - standard definition + - may contain the following strings: + - shared-dma-pool: This indicates a region of memory meant to be + used as a shared pool of DMA buffers for a set of devices. It can + be used by an operating system to instantiate the necessary pool + management subsystem if necessary. + - vendor specific string in the form ,[-] +no-map (optional) - empty property + - Indicates the operating system must not create a virtual mapping + of the region as part of its standard mapping of system memory, + nor permit speculative access to it under any circumstances other + than under the control of the device driver using the region. +reusable (optional) - empty property + - The operating system can use the memory in this region with the + limitation that the device driver(s) owning the region need to be + able to reclaim it back. Typically that means that the operating + system can use that region to store volatile or cached data that + can be otherwise regenerated or migrated elsewhere. + +Linux implementation note: +- If a "linux,cma-default" property is present, then Linux will use the + region for the default pool of the contiguous memory allocator. + +- If a "linux,dma-default" property is present, then Linux will use the + region for the default pool of the consistent DMA allocator. + +Device node references to reserved memory +----------------------------------------- +Regions in the /reserved-memory node may be referenced by other device +nodes by adding a memory-region property to the device node. + +memory-region (optional) - phandle, specifier pairs to children of /reserved-memory + +Example +------- +This example defines 3 contiguous regions are defined for Linux kernel: +one default of all device drivers (named linux,cma@72000000 and 64MiB in size), +one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and +one for multimedia processing (named multimedia-memory@77000000, 64MiB). + +/ { + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0x40000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x4000000>; + alignment = <0x2000>; + linux,cma-default; + }; + + display_reserved: framebuffer@78000000 { + reg = <0x78000000 0x800000>; + }; + + multimedia_reserved: multimedia@77000000 { + compatible = "acme,multimedia-memory"; + reg = <0x77000000 0x4000000>; + }; + }; + + /* ... */ + + fb0: video@12300000 { + memory-region = <&display_reserved>; + /* ... */ + }; + + scaler: scaler@12500000 { + memory-region = <&multimedia_reserved>; + /* ... */ + }; + + codec: codec@12600000 { + memory-region = <&multimedia_reserved>; + /* ... */ + }; +}; diff --git a/doc/device-tree-bindings/timer/fsl,mpc83xx-timer.txt b/doc/device-tree-bindings/timer/fsl,mpc83xx-timer.txt new file mode 100644 index 0000000000..608d24110b --- /dev/null +++ b/doc/device-tree-bindings/timer/fsl,mpc83xx-timer.txt @@ -0,0 +1,21 @@ +MPC83xx timer devices + +MPC83xx SoCs offer a decrementer interrupt that can be used to implement delay +functionality, and periodically triggered actions. + +Required properties: +- compatible: must be "fsl,mpc83xx-timer" +- clocks: must be a reference to the system's CSB (coherent system bus) clock, + provided by one of the "fsl,mpc83xx-clk" devices + +Example: + +socclocks: clocks { + compatible = "fsl,mpc832x-clk"; + #clock-cells = <1>; +}; + +timer { + compatible = "fsl,mpc83xx-timer"; + clocks = <&socclocks MPC83XX_CLK_CSB>; +}; diff --git a/doc/efi.rst b/doc/efi.rst new file mode 100644 index 0000000000..5337a55c3b --- /dev/null +++ b/doc/efi.rst @@ -0,0 +1,22 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +EFI subsystem +============= + +Boot services +------------- + +.. kernel-doc:: lib/efi_loader/efi_boottime.c + :internal: + +Image relocation +~~~~~~~~~~~~~~~~ + +.. kernel-doc:: lib/efi_loader/efi_image_loader.c + :internal: + +Runtime services +---------------- + +.. kernel-doc:: lib/efi_loader/efi_runtime.c + :internal: diff --git a/doc/index.rst b/doc/index.rst new file mode 100644 index 0000000000..0353c10a4b --- /dev/null +++ b/doc/index.rst @@ -0,0 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +####################### +U-Boot Developer Manual +####################### + +.. toctree:: + + efi + linker_lists + serial diff --git a/doc/linker_lists.rst b/doc/linker_lists.rst new file mode 100644 index 0000000000..72f514e0ac --- /dev/null +++ b/doc/linker_lists.rst @@ -0,0 +1,100 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Linker-Generated Arrays +======================= + +A linker list is constructed by grouping together linker input +sections, each containing one entry of the list. Each input section +contains a constant initialized variable which holds the entry's +content. Linker list input sections are constructed from the list +and entry names, plus a prefix which allows grouping all lists +together. Assuming _list and _entry are the list and entry names, +then the corresponding input section name is + +:: + + .u_boot_list_ + 2_ + @_list + _2_ + @_entry + +and the C variable name is + +:: + + _u_boot_list + _2_ + @_list + _2_ + @_entry + +This ensures uniqueness for both input section and C variable name. + +Note that the names differ only in the first character, "." for the +section and "_" for the variable, so that the linker cannot confuse +section and symbol names. From now on, both names will be referred +to as + +:: + + %u_boot_list_ + 2_ + @_list + _2_ + @_entry + +Entry variables need never be referred to directly. + +The naming scheme for input sections allows grouping all linker lists +into a single linker output section and grouping all entries for a +single list. + +Note the two '_2_' constant components in the names: their presence +allows putting a start and end symbols around a list, by mapping +these symbols to sections names with components "1" (before) and +"3" (after) instead of "2" (within). +Start and end symbols for a list can generally be defined as + +:: + + %u_boot_list_2_ + @_list + _1_... + %u_boot_list_2_ + @_list + _3_... + +Start and end symbols for the whole of the linker lists area can be +defined as + +:: + + %u_boot_list_1_... + %u_boot_list_3_... + +Here is an example of the sorted sections which result from a list +"array" made up of three entries : "first", "second" and "third", +iterated at least once. + +:: + + .u_boot_list_2_array_1 + .u_boot_list_2_array_2_first + .u_boot_list_2_array_2_second + .u_boot_list_2_array_2_third + .u_boot_list_2_array_3 + +If lists must be divided into sublists (e.g. for iterating only on +part of a list), one can simply give the list a name of the form +'outer_2_inner', where 'outer' is the global list name and 'inner' +is the sub-list name. Iterators for the whole list should use the +global list name ("outer"); iterators for only a sub-list should use +the full sub-list name ("outer_2_inner"). + +Here is an example of the sections generated from a global list +named "drivers", two sub-lists named "i2c" and "pci", and iterators +defined for the whole list and each sub-list: + +:: + + %u_boot_list_2_drivers_1 + %u_boot_list_2_drivers_2_i2c_1 + %u_boot_list_2_drivers_2_i2c_2_first + %u_boot_list_2_drivers_2_i2c_2_first + %u_boot_list_2_drivers_2_i2c_2_second + %u_boot_list_2_drivers_2_i2c_2_third + %u_boot_list_2_drivers_2_i2c_3 + %u_boot_list_2_drivers_2_pci_1 + %u_boot_list_2_drivers_2_pci_2_first + %u_boot_list_2_drivers_2_pci_2_second + %u_boot_list_2_drivers_2_pci_2_third + %u_boot_list_2_drivers_2_pci_3 + %u_boot_list_2_drivers_3 + +.. kernel-doc:: include/linker_lists.h + :internal: diff --git a/doc/media/Makefile b/doc/media/Makefile new file mode 100644 index 0000000000..b9b43a34c3 --- /dev/null +++ b/doc/media/Makefile @@ -0,0 +1,38 @@ +# Rules to convert a .h file to inline RST documentation + +SRC_DIR=$(srctree)/doc/media +PARSER = $(srctree)/doc/sphinx/parse-headers.pl +API = $(srctree)/include + +FILES = linker_lists.h.rst + +TARGETS := $(addprefix $(BUILDDIR)/, $(FILES)) + +gen_rst = \ + echo ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions; \ + ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions + +quiet_gen_rst = echo ' PARSE $(patsubst $(srctree)/%,%,$<)'; \ + ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions + +silent_gen_rst = ${gen_rst} + +$(BUILDDIR)/linker_lists.h.rst: ${API}/linker_lists.h ${PARSER} $(SRC_DIR)/linker_lists.h.rst.exceptions + @$($(quiet)gen_rst) + +# Media build rules + +.PHONY: all html epub xml latex + +all: $(IMGDOT) $(BUILDDIR) ${TARGETS} +html: all +epub: all +xml: all +latex: $(IMGPDF) all +linkcheck: + +clean: + -rm -f $(DOTTGT) $(IMGTGT) ${TARGETS} 2>/dev/null + +$(BUILDDIR): + $(Q)mkdir -p $@ diff --git a/doc/media/linker_lists.h.rst.exceptions b/doc/media/linker_lists.h.rst.exceptions new file mode 100644 index 0000000000..e69de29bb2 diff --git a/doc/serial.rst b/doc/serial.rst new file mode 100644 index 0000000000..ed34e592a4 --- /dev/null +++ b/doc/serial.rst @@ -0,0 +1,7 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Serial system +============= + +.. kernel-doc:: drivers/serial/serial.c + :internal: diff --git a/doc/sphinx-static/theme_overrides.css b/doc/sphinx-static/theme_overrides.css new file mode 100644 index 0000000000..522b6d4c49 --- /dev/null +++ b/doc/sphinx-static/theme_overrides.css @@ -0,0 +1,89 @@ +/* -*- coding: utf-8; mode: css -*- + * + * Sphinx HTML theme customization: read the doc + * + */ + +/* Interim: Code-blocks with line nos - lines and line numbers don't line up. + * see: https://github.com/rtfd/sphinx_rtd_theme/issues/419 + */ + +div[class^="highlight"] pre { + line-height: normal; +} +.rst-content .highlight > pre { + line-height: normal; +} + +@media screen { + + /* content column + * + * RTD theme's default is 800px as max width for the content, but we have + * tables with tons of columns, which need the full width of the view-port. + */ + + .wy-nav-content{max-width: none; } + + /* table: + * + * - Sequences of whitespace should collapse into a single whitespace. + * - make the overflow auto (scrollbar if needed) + * - align caption "left" ("center" is unsuitable on vast tables) + */ + + .wy-table-responsive table td { white-space: normal; } + .wy-table-responsive { overflow: auto; } + .rst-content table.docutils caption { text-align: left; font-size: 100%; } + + /* captions: + * + * - captions should have 100% (not 85%) font size + * - hide the permalink symbol as long as link is not hovered + */ + + .toc-title { + font-size: 150%; + font-weight: bold; + } + + caption, .wy-table caption, .rst-content table.field-list caption { + font-size: 100%; + } + caption a.headerlink { opacity: 0; } + caption a.headerlink:hover { opacity: 1; } + + /* Menu selection and keystrokes */ + + span.menuselection { + color: blue; + font-family: "Courier New", Courier, monospace + } + + code.kbd, code.kbd span { + color: white; + background-color: darkblue; + font-weight: bold; + font-family: "Courier New", Courier, monospace + } + + /* fix bottom margin of lists items */ + + .rst-content .section ul li:last-child, .rst-content .section ul li p:last-child { + margin-bottom: 12px; + } + + /* inline literal: drop the borderbox, padding and red color */ + + code, .rst-content tt, .rst-content code { + color: inherit; + border: none; + padding: unset; + background: inherit; + font-size: 85%; + } + + .rst-content tt.literal,.rst-content tt.literal,.rst-content code.literal { + color: inherit; + } +} diff --git a/doc/sphinx/cdomain.py b/doc/sphinx/cdomain.py new file mode 100644 index 0000000000..cf13ff3a65 --- /dev/null +++ b/doc/sphinx/cdomain.py @@ -0,0 +1,165 @@ +# -*- coding: utf-8; mode: python -*- +# pylint: disable=W0141,C0113,C0103,C0325 +u""" + cdomain + ~~~~~~~ + + Replacement for the sphinx c-domain. + + :copyright: Copyright (C) 2016 Markus Heiser + :license: GPL Version 2, June 1991 see Linux/COPYING for details. + + List of customizations: + + * Moved the *duplicate C object description* warnings for function + declarations in the nitpicky mode. See Sphinx documentation for + the config values for ``nitpick`` and ``nitpick_ignore``. + + * Add option 'name' to the "c:function:" directive. With option 'name' the + ref-name of a function can be modified. E.g.:: + + .. c:function:: int ioctl( int fd, int request ) + :name: VIDIOC_LOG_STATUS + + The func-name (e.g. ioctl) remains in the output but the ref-name changed + from 'ioctl' to 'VIDIOC_LOG_STATUS'. The function is referenced by:: + + * :c:func:`VIDIOC_LOG_STATUS` or + * :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3) + + * Handle signatures of function-like macros well. Don't try to deduce + arguments types of function-like macros. + +""" + +from docutils import nodes +from docutils.parsers.rst import directives + +import sphinx +from sphinx import addnodes +from sphinx.domains.c import c_funcptr_sig_re, c_sig_re +from sphinx.domains.c import CObject as Base_CObject +from sphinx.domains.c import CDomain as Base_CDomain + +__version__ = '1.0' + +# Get Sphinx version +major, minor, patch = sphinx.version_info[:3] + +def setup(app): + + app.override_domain(CDomain) + + return dict( + version = __version__, + parallel_read_safe = True, + parallel_write_safe = True + ) + +class CObject(Base_CObject): + + """ + Description of a C language object. + """ + option_spec = { + "name" : directives.unchanged + } + + def handle_func_like_macro(self, sig, signode): + u"""Handles signatures of function-like macros. + + If the objtype is 'function' and the the signature ``sig`` is a + function-like macro, the name of the macro is returned. Otherwise + ``False`` is returned. """ + + if not self.objtype == 'function': + return False + + m = c_funcptr_sig_re.match(sig) + if m is None: + m = c_sig_re.match(sig) + if m is None: + raise ValueError('no match') + + rettype, fullname, arglist, _const = m.groups() + arglist = arglist.strip() + if rettype or not arglist: + return False + + arglist = arglist.replace('`', '').replace('\\ ', '') # remove markup + arglist = [a.strip() for a in arglist.split(",")] + + # has the first argument a type? + if len(arglist[0].split(" ")) > 1: + return False + + # This is a function-like macro, it's arguments are typeless! + signode += addnodes.desc_name(fullname, fullname) + paramlist = addnodes.desc_parameterlist() + signode += paramlist + + for argname in arglist: + param = addnodes.desc_parameter('', '', noemph=True) + # separate by non-breaking space in the output + param += nodes.emphasis(argname, argname) + paramlist += param + + return fullname + + def handle_signature(self, sig, signode): + """Transform a C signature into RST nodes.""" + + fullname = self.handle_func_like_macro(sig, signode) + if not fullname: + fullname = super(CObject, self).handle_signature(sig, signode) + + if "name" in self.options: + if self.objtype == 'function': + fullname = self.options["name"] + else: + # FIXME: handle :name: value of other declaration types? + pass + return fullname + + def add_target_and_index(self, name, sig, signode): + # for C API items we add a prefix since names are usually not qualified + # by a module name and so easily clash with e.g. section titles + targetname = 'c.' + name + if targetname not in self.state.document.ids: + signode['names'].append(targetname) + signode['ids'].append(targetname) + signode['first'] = (not self.names) + self.state.document.note_explicit_target(signode) + inv = self.env.domaindata['c']['objects'] + if (name in inv and self.env.config.nitpicky): + if self.objtype == 'function': + if ('c:func', name) not in self.env.config.nitpick_ignore: + self.state_machine.reporter.warning( + 'duplicate C object description of %s, ' % name + + 'other instance in ' + self.env.doc2path(inv[name][0]), + line=self.lineno) + inv[name] = (self.env.docname, self.objtype) + + indextext = self.get_index_text(name) + if indextext: + if major == 1 and minor < 4: + # indexnode's tuple changed in 1.4 + # https://github.com/sphinx-doc/sphinx/commit/e6a5a3a92e938fcd75866b4227db9e0524d58f7c + self.indexnode['entries'].append( + ('single', indextext, targetname, '')) + else: + self.indexnode['entries'].append( + ('single', indextext, targetname, '', None)) + +class CDomain(Base_CDomain): + + """C language domain.""" + name = 'c' + label = 'C' + directives = { + 'function': CObject, + 'member': CObject, + 'macro': CObject, + 'type': CObject, + 'var': CObject, + } diff --git a/doc/sphinx/kernel_include.py b/doc/sphinx/kernel_include.py new file mode 100755 index 0000000000..f523aa68a3 --- /dev/null +++ b/doc/sphinx/kernel_include.py @@ -0,0 +1,190 @@ +#!/usr/bin/env python3 +# -*- coding: utf-8; mode: python -*- +# pylint: disable=R0903, C0330, R0914, R0912, E0401 + +u""" + kernel-include + ~~~~~~~~~~~~~~ + + Implementation of the ``kernel-include`` reST-directive. + + :copyright: Copyright (C) 2016 Markus Heiser + :license: GPL Version 2, June 1991 see linux/COPYING for details. + + The ``kernel-include`` reST-directive is a replacement for the ``include`` + directive. The ``kernel-include`` directive expand environment variables in + the path name and allows to include files from arbitrary locations. + + .. hint:: + + Including files from arbitrary locations (e.g. from ``/etc``) is a + security risk for builders. This is why the ``include`` directive from + docutils *prohibit* pathnames pointing to locations *above* the filesystem + tree where the reST document with the include directive is placed. + + Substrings of the form $name or ${name} are replaced by the value of + environment variable name. Malformed variable names and references to + non-existing variables are left unchanged. +""" + +# ============================================================================== +# imports +# ============================================================================== + +import os.path + +from docutils import io, nodes, statemachine +from docutils.utils.error_reporting import SafeString, ErrorString +from docutils.parsers.rst import directives +from docutils.parsers.rst.directives.body import CodeBlock, NumberLines +from docutils.parsers.rst.directives.misc import Include + +__version__ = '1.0' + +# ============================================================================== +def setup(app): +# ============================================================================== + + app.add_directive("kernel-include", KernelInclude) + return dict( + version = __version__, + parallel_read_safe = True, + parallel_write_safe = True + ) + +# ============================================================================== +class KernelInclude(Include): +# ============================================================================== + + u"""KernelInclude (``kernel-include``) directive""" + + def run(self): + path = os.path.realpath( + os.path.expandvars(self.arguments[0])) + + # to get a bit security back, prohibit /etc: + if path.startswith(os.sep + "etc"): + raise self.severe( + 'Problems with "%s" directive, prohibited path: %s' + % (self.name, path)) + + self.arguments[0] = path + + #return super(KernelInclude, self).run() # won't work, see HINTs in _run() + return self._run() + + def _run(self): + """Include a file as part of the content of this reST file.""" + + # HINT: I had to copy&paste the whole Include.run method. I'am not happy + # with this, but due to security reasons, the Include.run method does + # not allow absolute or relative pathnames pointing to locations *above* + # the filesystem tree where the reST document is placed. + + if not self.state.document.settings.file_insertion_enabled: + raise self.warning('"%s" directive disabled.' % self.name) + source = self.state_machine.input_lines.source( + self.lineno - self.state_machine.input_offset - 1) + source_dir = os.path.dirname(os.path.abspath(source)) + path = directives.path(self.arguments[0]) + if path.startswith('<') and path.endswith('>'): + path = os.path.join(self.standard_include_path, path[1:-1]) + path = os.path.normpath(os.path.join(source_dir, path)) + + # HINT: this is the only line I had to change / commented out: + #path = utils.relative_path(None, path) + + path = nodes.reprunicode(path) + encoding = self.options.get( + 'encoding', self.state.document.settings.input_encoding) + e_handler=self.state.document.settings.input_encoding_error_handler + tab_width = self.options.get( + 'tab-width', self.state.document.settings.tab_width) + try: + self.state.document.settings.record_dependencies.add(path) + include_file = io.FileInput(source_path=path, + encoding=encoding, + error_handler=e_handler) + except UnicodeEncodeError as error: + raise self.severe('Problems with "%s" directive path:\n' + 'Cannot encode input file path "%s" ' + '(wrong locale?).' % + (self.name, SafeString(path))) + except IOError as error: + raise self.severe('Problems with "%s" directive path:\n%s.' % + (self.name, ErrorString(error))) + startline = self.options.get('start-line', None) + endline = self.options.get('end-line', None) + try: + if startline or (endline is not None): + lines = include_file.readlines() + rawtext = ''.join(lines[startline:endline]) + else: + rawtext = include_file.read() + except UnicodeError as error: + raise self.severe('Problem with "%s" directive:\n%s' % + (self.name, ErrorString(error))) + # start-after/end-before: no restrictions on newlines in match-text, + # and no restrictions on matching inside lines vs. line boundaries + after_text = self.options.get('start-after', None) + if after_text: + # skip content in rawtext before *and incl.* a matching text + after_index = rawtext.find(after_text) + if after_index < 0: + raise self.severe('Problem with "start-after" option of "%s" ' + 'directive:\nText not found.' % self.name) + rawtext = rawtext[after_index + len(after_text):] + before_text = self.options.get('end-before', None) + if before_text: + # skip content in rawtext after *and incl.* a matching text + before_index = rawtext.find(before_text) + if before_index < 0: + raise self.severe('Problem with "end-before" option of "%s" ' + 'directive:\nText not found.' % self.name) + rawtext = rawtext[:before_index] + + include_lines = statemachine.string2lines(rawtext, tab_width, + convert_whitespace=True) + if 'literal' in self.options: + # Convert tabs to spaces, if `tab_width` is positive. + if tab_width >= 0: + text = rawtext.expandtabs(tab_width) + else: + text = rawtext + literal_block = nodes.literal_block(rawtext, source=path, + classes=self.options.get('class', [])) + literal_block.line = 1 + self.add_name(literal_block) + if 'number-lines' in self.options: + try: + startline = int(self.options['number-lines'] or 1) + except ValueError: + raise self.error(':number-lines: with non-integer ' + 'start value') + endline = startline + len(include_lines) + if text.endswith('\n'): + text = text[:-1] + tokens = NumberLines([([], text)], startline, endline) + for classes, value in tokens: + if classes: + literal_block += nodes.inline(value, value, + classes=classes) + else: + literal_block += nodes.Text(value, value) + else: + literal_block += nodes.Text(text, text) + return [literal_block] + if 'code' in self.options: + self.options['source'] = path + codeblock = CodeBlock(self.name, + [self.options.pop('code')], # arguments + self.options, + include_lines, # content + self.lineno, + self.content_offset, + self.block_text, + self.state, + self.state_machine) + return codeblock.run() + self.state_machine.insert_input(include_lines, path) + return [] diff --git a/doc/sphinx/kerneldoc.py b/doc/sphinx/kerneldoc.py new file mode 100644 index 0000000000..fbedcc3946 --- /dev/null +++ b/doc/sphinx/kerneldoc.py @@ -0,0 +1,146 @@ +# coding=utf-8 +# +# Copyright © 2016 Intel Corporation +# +# Permission is hereby granted, free of charge, to any person obtaining a +# copy of this software and associated documentation files (the "Software"), +# to deal in the Software without restriction, including without limitation +# the rights to use, copy, modify, merge, publish, distribute, sublicense, +# and/or sell copies of the Software, and to permit persons to whom the +# Software is furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice (including the next +# paragraph) shall be included in all copies or substantial portions of the +# Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +# IN THE SOFTWARE. +# +# Authors: +# Jani Nikula +# +# Please make sure this works on both python2 and python3. +# + +import codecs +import os +import subprocess +import sys +import re +import glob + +from docutils import nodes, statemachine +from docutils.statemachine import ViewList +from docutils.parsers.rst import directives, Directive +from sphinx.ext.autodoc import AutodocReporter + +__version__ = '1.0' + +class KernelDocDirective(Directive): + """Extract kernel-doc comments from the specified file""" + required_argument = 1 + optional_arguments = 4 + option_spec = { + 'doc': directives.unchanged_required, + 'functions': directives.unchanged_required, + 'export': directives.unchanged, + 'internal': directives.unchanged, + } + has_content = False + + def run(self): + env = self.state.document.settings.env + cmd = [env.config.kerneldoc_bin, '-rst', '-enable-lineno'] + + filename = env.config.kerneldoc_srctree + '/' + self.arguments[0] + export_file_patterns = [] + + # Tell sphinx of the dependency + env.note_dependency(os.path.abspath(filename)) + + tab_width = self.options.get('tab-width', self.state.document.settings.tab_width) + + # FIXME: make this nicer and more robust against errors + if 'export' in self.options: + cmd += ['-export'] + export_file_patterns = str(self.options.get('export')).split() + elif 'internal' in self.options: + cmd += ['-internal'] + export_file_patterns = str(self.options.get('internal')).split() + elif 'doc' in self.options: + cmd += ['-function', str(self.options.get('doc'))] + elif 'functions' in self.options: + for f in str(self.options.get('functions')).split(): + cmd += ['-function', f] + + for pattern in export_file_patterns: + for f in glob.glob(env.config.kerneldoc_srctree + '/' + pattern): + env.note_dependency(os.path.abspath(f)) + cmd += ['-export-file', f] + + cmd += [filename] + + try: + env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd))) + + p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE) + out, err = p.communicate() + + out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8') + + if p.returncode != 0: + sys.stderr.write(err) + + env.app.warn('kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode)) + return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))] + elif env.config.kerneldoc_verbosity > 0: + sys.stderr.write(err) + + lines = statemachine.string2lines(out, tab_width, convert_whitespace=True) + result = ViewList() + + lineoffset = 0; + line_regex = re.compile("^#define LINENO ([0-9]+)$") + for line in lines: + match = line_regex.search(line) + if match: + # sphinx counts lines from 0 + lineoffset = int(match.group(1)) - 1 + # we must eat our comments since the upset the markup + else: + result.append(line, filename, lineoffset) + lineoffset += 1 + + node = nodes.section() + buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter + self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter) + self.state.memo.title_styles, self.state.memo.section_level = [], 0 + try: + self.state.nested_parse(result, 0, node, match_titles=1) + finally: + self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = buf + + return node.children + + except Exception as e: # pylint: disable=W0703 + env.app.warn('kernel-doc \'%s\' processing failed with: %s' % + (" ".join(cmd), str(e))) + return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))] + +def setup(app): + app.add_config_value('kerneldoc_bin', None, 'env') + app.add_config_value('kerneldoc_srctree', None, 'env') + app.add_config_value('kerneldoc_verbosity', 1, 'env') + + app.add_directive('kernel-doc', KernelDocDirective) + + return dict( + version = __version__, + parallel_read_safe = True, + parallel_write_safe = True + ) diff --git a/doc/sphinx/kfigure.py b/doc/sphinx/kfigure.py new file mode 100644 index 0000000000..b97228d2cc --- /dev/null +++ b/doc/sphinx/kfigure.py @@ -0,0 +1,551 @@ +# -*- coding: utf-8; mode: python -*- +# pylint: disable=C0103, R0903, R0912, R0915 +u""" + scalable figure and image handling + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + Sphinx extension which implements scalable image handling. + + :copyright: Copyright (C) 2016 Markus Heiser + :license: GPL Version 2, June 1991 see Linux/COPYING for details. + + The build for image formats depend on image's source format and output's + destination format. This extension implement methods to simplify image + handling from the author's POV. Directives like ``kernel-figure`` implement + methods *to* always get the best output-format even if some tools are not + installed. For more details take a look at ``convert_image(...)`` which is + the core of all conversions. + + * ``.. kernel-image``: for image handling / a ``.. image::`` replacement + + * ``.. kernel-figure``: for figure handling / a ``.. figure::`` replacement + + * ``.. kernel-render``: for render markup / a concept to embed *render* + markups (or languages). Supported markups (see ``RENDER_MARKUP_EXT``) + + - ``DOT``: render embedded Graphviz's **DOC** + - ``SVG``: render embedded Scalable Vector Graphics (**SVG**) + - ... *developable* + + Used tools: + + * ``dot(1)``: Graphviz (http://www.graphviz.org). If Graphviz is not + available, the DOT language is inserted as literal-block. + + * SVG to PDF: To generate PDF, you need at least one of this tools: + + - ``convert(1)``: ImageMagick (https://www.imagemagick.org) + + List of customizations: + + * generate PDF from SVG / used by PDF (LaTeX) builder + + * generate SVG (html-builder) and PDF (latex-builder) from DOT files. + DOT: see http://www.graphviz.org/content/dot-language + + """ + +import os +from os import path +import subprocess +from hashlib import sha1 +import sys + +from docutils import nodes +from docutils.statemachine import ViewList +from docutils.parsers.rst import directives +from docutils.parsers.rst.directives import images +import sphinx + +from sphinx.util.nodes import clean_astext +from six import iteritems + +PY3 = sys.version_info[0] == 3 + +if PY3: + _unicode = str +else: + _unicode = unicode + +# Get Sphinx version +major, minor, patch = sphinx.version_info[:3] +if major == 1 and minor > 3: + # patches.Figure only landed in Sphinx 1.4 + from sphinx.directives.patches import Figure # pylint: disable=C0413 +else: + Figure = images.Figure + +__version__ = '1.0.0' + +# simple helper +# ------------- + +def which(cmd): + """Searches the ``cmd`` in the ``PATH`` environment. + + This *which* searches the PATH for executable ``cmd`` . First match is + returned, if nothing is found, ``None` is returned. + """ + envpath = os.environ.get('PATH', None) or os.defpath + for folder in envpath.split(os.pathsep): + fname = folder + os.sep + cmd + if path.isfile(fname): + return fname + +def mkdir(folder, mode=0o775): + if not path.isdir(folder): + os.makedirs(folder, mode) + +def file2literal(fname): + with open(fname, "r") as src: + data = src.read() + node = nodes.literal_block(data, data) + return node + +def isNewer(path1, path2): + """Returns True if ``path1`` is newer than ``path2`` + + If ``path1`` exists and is newer than ``path2`` the function returns + ``True`` is returned otherwise ``False`` + """ + return (path.exists(path1) + and os.stat(path1).st_ctime > os.stat(path2).st_ctime) + +def pass_handle(self, node): # pylint: disable=W0613 + pass + +# setup conversion tools and sphinx extension +# ------------------------------------------- + +# Graphviz's dot(1) support +dot_cmd = None + +# ImageMagick' convert(1) support +convert_cmd = None + + +def setup(app): + # check toolchain first + app.connect('builder-inited', setupTools) + + # image handling + app.add_directive("kernel-image", KernelImage) + app.add_node(kernel_image, + html = (visit_kernel_image, pass_handle), + latex = (visit_kernel_image, pass_handle), + texinfo = (visit_kernel_image, pass_handle), + text = (visit_kernel_image, pass_handle), + man = (visit_kernel_image, pass_handle), ) + + # figure handling + app.add_directive("kernel-figure", KernelFigure) + app.add_node(kernel_figure, + html = (visit_kernel_figure, pass_handle), + latex = (visit_kernel_figure, pass_handle), + texinfo = (visit_kernel_figure, pass_handle), + text = (visit_kernel_figure, pass_handle), + man = (visit_kernel_figure, pass_handle), ) + + # render handling + app.add_directive('kernel-render', KernelRender) + app.add_node(kernel_render, + html = (visit_kernel_render, pass_handle), + latex = (visit_kernel_render, pass_handle), + texinfo = (visit_kernel_render, pass_handle), + text = (visit_kernel_render, pass_handle), + man = (visit_kernel_render, pass_handle), ) + + app.connect('doctree-read', add_kernel_figure_to_std_domain) + + return dict( + version = __version__, + parallel_read_safe = True, + parallel_write_safe = True + ) + + +def setupTools(app): + u""" + Check available build tools and log some *verbose* messages. + + This function is called once, when the builder is initiated. + """ + global dot_cmd, convert_cmd # pylint: disable=W0603 + app.verbose("kfigure: check installed tools ...") + + dot_cmd = which('dot') + convert_cmd = which('convert') + + if dot_cmd: + app.verbose("use dot(1) from: " + dot_cmd) + else: + app.warn("dot(1) not found, for better output quality install " + "graphviz from http://www.graphviz.org") + if convert_cmd: + app.verbose("use convert(1) from: " + convert_cmd) + else: + app.warn( + "convert(1) not found, for SVG to PDF conversion install " + "ImageMagick (https://www.imagemagick.org)") + + +# integrate conversion tools +# -------------------------- + +RENDER_MARKUP_EXT = { + # The '.ext' must be handled by convert_image(..) function's *in_ext* input. + # : <.ext> + 'DOT' : '.dot', + 'SVG' : '.svg' +} + +def convert_image(img_node, translator, src_fname=None): + """Convert a image node for the builder. + + Different builder prefer different image formats, e.g. *latex* builder + prefer PDF while *html* builder prefer SVG format for images. + + This function handles output image formats in dependence of source the + format (of the image) and the translator's output format. + """ + app = translator.builder.app + + fname, in_ext = path.splitext(path.basename(img_node['uri'])) + if src_fname is None: + src_fname = path.join(translator.builder.srcdir, img_node['uri']) + if not path.exists(src_fname): + src_fname = path.join(translator.builder.outdir, img_node['uri']) + + dst_fname = None + + # in kernel builds, use 'make SPHINXOPTS=-v' to see verbose messages + + app.verbose('assert best format for: ' + img_node['uri']) + + if in_ext == '.dot': + + if not dot_cmd: + app.verbose("dot from graphviz not available / include DOT raw.") + img_node.replace_self(file2literal(src_fname)) + + elif translator.builder.format == 'latex': + dst_fname = path.join(translator.builder.outdir, fname + '.pdf') + img_node['uri'] = fname + '.pdf' + img_node['candidates'] = {'*': fname + '.pdf'} + + + elif translator.builder.format == 'html': + dst_fname = path.join( + translator.builder.outdir, + translator.builder.imagedir, + fname + '.svg') + img_node['uri'] = path.join( + translator.builder.imgpath, fname + '.svg') + img_node['candidates'] = { + '*': path.join(translator.builder.imgpath, fname + '.svg')} + + else: + # all other builder formats will include DOT as raw + img_node.replace_self(file2literal(src_fname)) + + elif in_ext == '.svg': + + if translator.builder.format == 'latex': + if convert_cmd is None: + app.verbose("no SVG to PDF conversion available / include SVG raw.") + img_node.replace_self(file2literal(src_fname)) + else: + dst_fname = path.join(translator.builder.outdir, fname + '.pdf') + img_node['uri'] = fname + '.pdf' + img_node['candidates'] = {'*': fname + '.pdf'} + + if dst_fname: + # the builder needs not to copy one more time, so pop it if exists. + translator.builder.images.pop(img_node['uri'], None) + _name = dst_fname[len(translator.builder.outdir) + 1:] + + if isNewer(dst_fname, src_fname): + app.verbose("convert: {out}/%s already exists and is newer" % _name) + + else: + ok = False + mkdir(path.dirname(dst_fname)) + + if in_ext == '.dot': + app.verbose('convert DOT to: {out}/' + _name) + ok = dot2format(app, src_fname, dst_fname) + + elif in_ext == '.svg': + app.verbose('convert SVG to: {out}/' + _name) + ok = svg2pdf(app, src_fname, dst_fname) + + if not ok: + img_node.replace_self(file2literal(src_fname)) + + +def dot2format(app, dot_fname, out_fname): + """Converts DOT file to ``out_fname`` using ``dot(1)``. + + * ``dot_fname`` pathname of the input DOT file, including extension ``.dot`` + * ``out_fname`` pathname of the output file, including format extension + + The *format extension* depends on the ``dot`` command (see ``man dot`` + option ``-Txxx``). Normally you will use one of the following extensions: + + - ``.ps`` for PostScript, + - ``.svg`` or ``svgz`` for Structured Vector Graphics, + - ``.fig`` for XFIG graphics and + - ``.png`` or ``gif`` for common bitmap graphics. + + """ + out_format = path.splitext(out_fname)[1][1:] + cmd = [dot_cmd, '-T%s' % out_format, dot_fname] + exit_code = 42 + + with open(out_fname, "w") as out: + exit_code = subprocess.call(cmd, stdout = out) + if exit_code != 0: + app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd))) + return bool(exit_code == 0) + +def svg2pdf(app, svg_fname, pdf_fname): + """Converts SVG to PDF with ``convert(1)`` command. + + Uses ``convert(1)`` from ImageMagick (https://www.imagemagick.org) for + conversion. Returns ``True`` on success and ``False`` if an error occurred. + + * ``svg_fname`` pathname of the input SVG file with extension (``.svg``) + * ``pdf_name`` pathname of the output PDF file with extension (``.pdf``) + + """ + cmd = [convert_cmd, svg_fname, pdf_fname] + # use stdout and stderr from parent + exit_code = subprocess.call(cmd) + if exit_code != 0: + app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd))) + return bool(exit_code == 0) + + +# image handling +# --------------------- + +def visit_kernel_image(self, node): # pylint: disable=W0613 + """Visitor of the ``kernel_image`` Node. + + Handles the ``image`` child-node with the ``convert_image(...)``. + """ + img_node = node[0] + convert_image(img_node, self) + +class kernel_image(nodes.image): + """Node for ``kernel-image`` directive.""" + pass + +class KernelImage(images.Image): + u"""KernelImage directive + + Earns everything from ``.. image::`` directive, except *remote URI* and + *glob* pattern. The KernelImage wraps a image node into a + kernel_image node. See ``visit_kernel_image``. + """ + + def run(self): + uri = self.arguments[0] + if uri.endswith('.*') or uri.find('://') != -1: + raise self.severe( + 'Error in "%s: %s": glob pattern and remote images are not allowed' + % (self.name, uri)) + result = images.Image.run(self) + if len(result) == 2 or isinstance(result[0], nodes.system_message): + return result + (image_node,) = result + # wrap image node into a kernel_image node / see visitors + node = kernel_image('', image_node) + return [node] + +# figure handling +# --------------------- + +def visit_kernel_figure(self, node): # pylint: disable=W0613 + """Visitor of the ``kernel_figure`` Node. + + Handles the ``image`` child-node with the ``convert_image(...)``. + """ + img_node = node[0][0] + convert_image(img_node, self) + +class kernel_figure(nodes.figure): + """Node for ``kernel-figure`` directive.""" + +class KernelFigure(Figure): + u"""KernelImage directive + + Earns everything from ``.. figure::`` directive, except *remote URI* and + *glob* pattern. The KernelFigure wraps a figure node into a kernel_figure + node. See ``visit_kernel_figure``. + """ + + def run(self): + uri = self.arguments[0] + if uri.endswith('.*') or uri.find('://') != -1: + raise self.severe( + 'Error in "%s: %s":' + ' glob pattern and remote images are not allowed' + % (self.name, uri)) + result = Figure.run(self) + if len(result) == 2 or isinstance(result[0], nodes.system_message): + return result + (figure_node,) = result + # wrap figure node into a kernel_figure node / see visitors + node = kernel_figure('', figure_node) + return [node] + + +# render handling +# --------------------- + +def visit_kernel_render(self, node): + """Visitor of the ``kernel_render`` Node. + + If rendering tools available, save the markup of the ``literal_block`` child + node into a file and replace the ``literal_block`` node with a new created + ``image`` node, pointing to the saved markup file. Afterwards, handle the + image child-node with the ``convert_image(...)``. + """ + app = self.builder.app + srclang = node.get('srclang') + + app.verbose('visit kernel-render node lang: "%s"' % (srclang)) + + tmp_ext = RENDER_MARKUP_EXT.get(srclang, None) + if tmp_ext is None: + app.warn('kernel-render: "%s" unknown / include raw.' % (srclang)) + return + + if not dot_cmd and tmp_ext == '.dot': + app.verbose("dot from graphviz not available / include raw.") + return + + literal_block = node[0] + + code = literal_block.astext() + hashobj = code.encode('utf-8') # str(node.attributes) + fname = path.join('%s-%s' % (srclang, sha1(hashobj).hexdigest())) + + tmp_fname = path.join( + self.builder.outdir, self.builder.imagedir, fname + tmp_ext) + + if not path.isfile(tmp_fname): + mkdir(path.dirname(tmp_fname)) + with open(tmp_fname, "w") as out: + out.write(code) + + img_node = nodes.image(node.rawsource, **node.attributes) + img_node['uri'] = path.join(self.builder.imgpath, fname + tmp_ext) + img_node['candidates'] = { + '*': path.join(self.builder.imgpath, fname + tmp_ext)} + + literal_block.replace_self(img_node) + convert_image(img_node, self, tmp_fname) + + +class kernel_render(nodes.General, nodes.Inline, nodes.Element): + """Node for ``kernel-render`` directive.""" + pass + +class KernelRender(Figure): + u"""KernelRender directive + + Render content by external tool. Has all the options known from the + *figure* directive, plus option ``caption``. If ``caption`` has a + value, a figure node with the *caption* is inserted. If not, a image node is + inserted. + + The KernelRender directive wraps the text of the directive into a + literal_block node and wraps it into a kernel_render node. See + ``visit_kernel_render``. + """ + has_content = True + required_arguments = 1 + optional_arguments = 0 + final_argument_whitespace = False + + # earn options from 'figure' + option_spec = Figure.option_spec.copy() + option_spec['caption'] = directives.unchanged + + def run(self): + return [self.build_node()] + + def build_node(self): + + srclang = self.arguments[0].strip() + if srclang not in RENDER_MARKUP_EXT.keys(): + return [self.state_machine.reporter.warning( + 'Unknown source language "%s", use one of: %s.' % ( + srclang, ",".join(RENDER_MARKUP_EXT.keys())), + line=self.lineno)] + + code = '\n'.join(self.content) + if not code.strip(): + return [self.state_machine.reporter.warning( + 'Ignoring "%s" directive without content.' % ( + self.name), + line=self.lineno)] + + node = kernel_render() + node['alt'] = self.options.get('alt','') + node['srclang'] = srclang + literal_node = nodes.literal_block(code, code) + node += literal_node + + caption = self.options.get('caption') + if caption: + # parse caption's content + parsed = nodes.Element() + self.state.nested_parse( + ViewList([caption], source=''), self.content_offset, parsed) + caption_node = nodes.caption( + parsed[0].rawsource, '', *parsed[0].children) + caption_node.source = parsed[0].source + caption_node.line = parsed[0].line + + figure_node = nodes.figure('', node) + for k,v in self.options.items(): + figure_node[k] = v + figure_node += caption_node + + node = figure_node + + return node + +def add_kernel_figure_to_std_domain(app, doctree): + """Add kernel-figure anchors to 'std' domain. + + The ``StandardDomain.process_doc(..)`` method does not know how to resolve + the caption (label) of ``kernel-figure`` directive (it only knows about + standard nodes, e.g. table, figure etc.). Without any additional handling + this will result in a 'undefined label' for kernel-figures. + + This handle adds labels of kernel-figure to the 'std' domain labels. + """ + + std = app.env.domains["std"] + docname = app.env.docname + labels = std.data["labels"] + + for name, explicit in iteritems(doctree.nametypes): + if not explicit: + continue + labelid = doctree.nameids[name] + if labelid is None: + continue + node = doctree.ids[labelid] + + if node.tagname == 'kernel_figure': + for n in node.next_node(): + if n.tagname == 'caption': + sectname = clean_astext(n) + # add label to std domain + labels[name] = docname, labelid, sectname + break diff --git a/doc/sphinx/load_config.py b/doc/sphinx/load_config.py new file mode 100644 index 0000000000..301a21aa4f --- /dev/null +++ b/doc/sphinx/load_config.py @@ -0,0 +1,32 @@ +# -*- coding: utf-8; mode: python -*- +# pylint: disable=R0903, C0330, R0914, R0912, E0401 + +import os +import sys +from sphinx.util.pycompat import execfile_ + +# ------------------------------------------------------------------------------ +def loadConfig(namespace): +# ------------------------------------------------------------------------------ + + u"""Load an additional configuration file into *namespace*. + + The name of the configuration file is taken from the environment + ``SPHINX_CONF``. The external configuration file extends (or overwrites) the + configuration values from the origin ``conf.py``. With this you are able to + maintain *build themes*. """ + + config_file = os.environ.get("SPHINX_CONF", None) + if (config_file is not None + and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ): + config_file = os.path.abspath(config_file) + + if os.path.isfile(config_file): + sys.stdout.write("load additional sphinx-config: %s\n" % config_file) + config = namespace.copy() + config['__file__'] = config_file + execfile_(config_file, config) + del config['__file__'] + namespace.update(config) + else: + sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file) diff --git a/doc/sphinx/parse-headers.pl b/doc/sphinx/parse-headers.pl new file mode 100755 index 0000000000..d4f38262eb --- /dev/null +++ b/doc/sphinx/parse-headers.pl @@ -0,0 +1,401 @@ +#!/usr/bin/perl +use strict; +use Text::Tabs; +use Getopt::Long; +use Pod::Usage; + +my $debug; +my $help; +my $man; + +GetOptions( + "debug" => \$debug, + 'usage|?' => \$help, + 'help' => \$man +) or pod2usage(2); + +pod2usage(1) if $help; +pod2usage(-exitstatus => 0, -verbose => 2) if $man; +pod2usage(2) if (scalar @ARGV < 2 || scalar @ARGV > 3); + +my ($file_in, $file_out, $file_exceptions) = @ARGV; + +my $data; +my %ioctls; +my %defines; +my %typedefs; +my %enums; +my %enum_symbols; +my %structs; + +require Data::Dumper if ($debug); + +# +# read the file and get identifiers +# + +my $is_enum = 0; +my $is_comment = 0; +open IN, $file_in or die "Can't open $file_in"; +while () { + $data .= $_; + + my $ln = $_; + if (!$is_comment) { + $ln =~ s,/\*.*(\*/),,g; + + $is_comment = 1 if ($ln =~ s,/\*.*,,); + } else { + if ($ln =~ s,^(.*\*/),,) { + $is_comment = 0; + } else { + next; + } + } + + if ($is_enum && $ln =~ m/^\s*([_\w][\w\d_]+)\s*[\,=]?/) { + my $s = $1; + my $n = $1; + $n =~ tr/A-Z/a-z/; + $n =~ tr/_/-/; + + $enum_symbols{$s} = "\\ :ref:`$s <$n>`\\ "; + + $is_enum = 0 if ($is_enum && m/\}/); + next; + } + $is_enum = 0 if ($is_enum && m/\}/); + + if ($ln =~ m/^\s*#\s*define\s+([_\w][\w\d_]+)\s+_IO/) { + my $s = $1; + my $n = $1; + $n =~ tr/A-Z/a-z/; + + $ioctls{$s} = "\\ :ref:`$s <$n>`\\ "; + next; + } + + if ($ln =~ m/^\s*#\s*define\s+([_\w][\w\d_]+)\s+/) { + my $s = $1; + my $n = $1; + $n =~ tr/A-Z/a-z/; + $n =~ tr/_/-/; + + $defines{$s} = "\\ :ref:`$s <$n>`\\ "; + next; + } + + if ($ln =~ m/^\s*typedef\s+([_\w][\w\d_]+)\s+(.*)\s+([_\w][\w\d_]+);/) { + my $s = $2; + my $n = $3; + + $typedefs{$n} = "\\ :c:type:`$n <$s>`\\ "; + next; + } + if ($ln =~ m/^\s*enum\s+([_\w][\w\d_]+)\s+\{/ + || $ln =~ m/^\s*enum\s+([_\w][\w\d_]+)$/ + || $ln =~ m/^\s*typedef\s*enum\s+([_\w][\w\d_]+)\s+\{/ + || $ln =~ m/^\s*typedef\s*enum\s+([_\w][\w\d_]+)$/) { + my $s = $1; + + $enums{$s} = "enum :c:type:`$s`\\ "; + + $is_enum = $1; + next; + } + if ($ln =~ m/^\s*struct\s+([_\w][\w\d_]+)\s+\{/ + || $ln =~ m/^\s*struct\s+([[_\w][\w\d_]+)$/ + || $ln =~ m/^\s*typedef\s*struct\s+([_\w][\w\d_]+)\s+\{/ + || $ln =~ m/^\s*typedef\s*struct\s+([[_\w][\w\d_]+)$/ + ) { + my $s = $1; + + $structs{$s} = "struct :c:type:`$s`\\ "; + next; + } +} +close IN; + +# +# Handle multi-line typedefs +# + +my @matches = ($data =~ m/typedef\s+struct\s+\S+?\s*\{[^\}]+\}\s*(\S+)\s*\;/g, + $data =~ m/typedef\s+enum\s+\S+?\s*\{[^\}]+\}\s*(\S+)\s*\;/g,); +foreach my $m (@matches) { + my $s = $m; + + $typedefs{$s} = "\\ :c:type:`$s`\\ "; + next; +} + +# +# Handle exceptions, if any +# + +my %def_reftype = ( + "ioctl" => ":ref", + "define" => ":ref", + "symbol" => ":ref", + "typedef" => ":c:type", + "enum" => ":c:type", + "struct" => ":c:type", +); + +if ($file_exceptions) { + open IN, $file_exceptions or die "Can't read $file_exceptions"; + while () { + next if (m/^\s*$/ || m/^\s*#/); + + # Parsers to ignore a symbol + + if (m/^ignore\s+ioctl\s+(\S+)/) { + delete $ioctls{$1} if (exists($ioctls{$1})); + next; + } + if (m/^ignore\s+define\s+(\S+)/) { + delete $defines{$1} if (exists($defines{$1})); + next; + } + if (m/^ignore\s+typedef\s+(\S+)/) { + delete $typedefs{$1} if (exists($typedefs{$1})); + next; + } + if (m/^ignore\s+enum\s+(\S+)/) { + delete $enums{$1} if (exists($enums{$1})); + next; + } + if (m/^ignore\s+struct\s+(\S+)/) { + delete $structs{$1} if (exists($structs{$1})); + next; + } + if (m/^ignore\s+symbol\s+(\S+)/) { + delete $enum_symbols{$1} if (exists($enum_symbols{$1})); + next; + } + + # Parsers to replace a symbol + my ($type, $old, $new, $reftype); + + if (m/^replace\s+(\S+)\s+(\S+)\s+(\S+)/) { + $type = $1; + $old = $2; + $new = $3; + } else { + die "Can't parse $file_exceptions: $_"; + } + + if ($new =~ m/^\:c\:(data|func|macro|type)\:\`(.+)\`/) { + $reftype = ":c:$1"; + $new = $2; + } elsif ($new =~ m/\:ref\:\`(.+)\`/) { + $reftype = ":ref"; + $new = $1; + } else { + $reftype = $def_reftype{$type}; + } + $new = "$reftype:`$old <$new>`"; + + if ($type eq "ioctl") { + $ioctls{$old} = $new if (exists($ioctls{$old})); + next; + } + if ($type eq "define") { + $defines{$old} = $new if (exists($defines{$old})); + next; + } + if ($type eq "symbol") { + $enum_symbols{$old} = $new if (exists($enum_symbols{$old})); + next; + } + if ($type eq "typedef") { + $typedefs{$old} = $new if (exists($typedefs{$old})); + next; + } + if ($type eq "enum") { + $enums{$old} = $new if (exists($enums{$old})); + next; + } + if ($type eq "struct") { + $structs{$old} = $new if (exists($structs{$old})); + next; + } + + die "Can't parse $file_exceptions: $_"; + } +} + +if ($debug) { + print Data::Dumper->Dump([\%ioctls], [qw(*ioctls)]) if (%ioctls); + print Data::Dumper->Dump([\%typedefs], [qw(*typedefs)]) if (%typedefs); + print Data::Dumper->Dump([\%enums], [qw(*enums)]) if (%enums); + print Data::Dumper->Dump([\%structs], [qw(*structs)]) if (%structs); + print Data::Dumper->Dump([\%defines], [qw(*defines)]) if (%defines); + print Data::Dumper->Dump([\%enum_symbols], [qw(*enum_symbols)]) if (%enum_symbols); +} + +# +# Align block +# +$data = expand($data); +$data = " " . $data; +$data =~ s/\n/\n /g; +$data =~ s/\n\s+$/\n/g; +$data =~ s/\n\s+\n/\n\n/g; + +# +# Add escape codes for special characters +# +$data =~ s,([\_\`\*\<\>\&\\\\:\/\|\%\$\#\{\}\~\^]),\\$1,g; + +$data =~ s,DEPRECATED,**DEPRECATED**,g; + +# +# Add references +# + +my $start_delim = "[ \n\t\(\=\*\@]"; +my $end_delim = "(\\s|,|\\\\=|\\\\:|\\;|\\\)|\\}|\\{)"; + +foreach my $r (keys %ioctls) { + my $s = $ioctls{$r}; + + $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; + + print "$r -> $s\n" if ($debug); + + $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; +} + +foreach my $r (keys %defines) { + my $s = $defines{$r}; + + $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; + + print "$r -> $s\n" if ($debug); + + $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; +} + +foreach my $r (keys %enum_symbols) { + my $s = $enum_symbols{$r}; + + $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; + + print "$r -> $s\n" if ($debug); + + $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; +} + +foreach my $r (keys %enums) { + my $s = $enums{$r}; + + $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; + + print "$r -> $s\n" if ($debug); + + $data =~ s/enum\s+($r)$end_delim/$s$2/g; +} + +foreach my $r (keys %structs) { + my $s = $structs{$r}; + + $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; + + print "$r -> $s\n" if ($debug); + + $data =~ s/struct\s+($r)$end_delim/$s$2/g; +} + +foreach my $r (keys %typedefs) { + my $s = $typedefs{$r}; + + $r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g; + + print "$r -> $s\n" if ($debug); + $data =~ s/($start_delim)($r)$end_delim/$1$s$3/g; +} + +$data =~ s/\\ ([\n\s])/\1/g; + +# +# Generate output file +# + +my $title = $file_in; +$title =~ s,.*/,,; + +open OUT, "> $file_out" or die "Can't open $file_out"; +print OUT ".. -*- coding: utf-8; mode: rst -*-\n\n"; +print OUT "$title\n"; +print OUT "=" x length($title); +print OUT "\n\n.. parsed-literal::\n\n"; +print OUT $data; +close OUT; + +__END__ + +=head1 NAME + +parse_headers.pl - parse a C file, in order to identify functions, structs, +enums and defines and create cross-references to a Sphinx book. + +=head1 SYNOPSIS + +B [] [] + +Where can be: --debug, --help or --man. + +=head1 OPTIONS + +=over 8 + +=item B<--debug> + +Put the script in verbose mode, useful for debugging. + +=item B<--usage> + +Prints a brief help message and exits. + +=item B<--help> + +Prints a more detailed help message and exits. + +=back + +=head1 DESCRIPTION + +Convert a C header or source file (C_FILE), into a ReStructured Text +included via ..parsed-literal block with cross-references for the +documentation files that describe the API. It accepts an optional +EXCEPTIONS_FILE with describes what elements will be either ignored or +be pointed to a non-default reference. + +The output is written at the (OUT_FILE). + +It is capable of identifying defines, functions, structs, typedefs, +enums and enum symbols and create cross-references for all of them. +It is also capable of distinguish #define used for specifying a Linux +ioctl. + +The EXCEPTIONS_FILE contain two rules to allow ignoring a symbol or +to replace the default references by a custom one. + +Please read doc/doc-guide/parse-headers.rst at the Kernel's +tree for more details. + +=head1 BUGS + +Report bugs to Mauro Carvalho Chehab + +=head1 COPYRIGHT + +Copyright (c) 2016 by Mauro Carvalho Chehab . + +License GPLv2: GNU GPL version 2 . + +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law. + +=cut diff --git a/doc/sphinx/requirements.txt b/doc/sphinx/requirements.txt new file mode 100644 index 0000000000..742be3e126 --- /dev/null +++ b/doc/sphinx/requirements.txt @@ -0,0 +1,3 @@ +docutils==0.12 +Sphinx==1.4.9 +sphinx_rtd_theme diff --git a/doc/sphinx/rstFlatTable.py b/doc/sphinx/rstFlatTable.py new file mode 100755 index 0000000000..f9a4b46dbe --- /dev/null +++ b/doc/sphinx/rstFlatTable.py @@ -0,0 +1,376 @@ +#!/usr/bin/env python3 +# -*- coding: utf-8; mode: python -*- +# pylint: disable=C0330, R0903, R0912 + +u""" + flat-table + ~~~~~~~~~~ + + Implementation of the ``flat-table`` reST-directive. + + :copyright: Copyright (C) 2016 Markus Heiser + :license: GPL Version 2, June 1991 see linux/COPYING for details. + + The ``flat-table`` (:py:class:`FlatTable`) is a double-stage list similar to + the ``list-table`` with some additional features: + + * *column-span*: with the role ``cspan`` a cell can be extended through + additional columns + + * *row-span*: with the role ``rspan`` a cell can be extended through + additional rows + + * *auto span* rightmost cell of a table row over the missing cells on the + right side of that table-row. With Option ``:fill-cells:`` this behavior + can changed from *auto span* to *auto fill*, which automaticly inserts + (empty) cells instead of spanning the last cell. + + Options: + + * header-rows: [int] count of header rows + * stub-columns: [int] count of stub columns + * widths: [[int] [int] ... ] widths of columns + * fill-cells: instead of autospann missing cells, insert missing cells + + roles: + + * cspan: [int] additionale columns (*morecols*) + * rspan: [int] additionale rows (*morerows*) +""" + +# ============================================================================== +# imports +# ============================================================================== + +import sys + +from docutils import nodes +from docutils.parsers.rst import directives, roles +from docutils.parsers.rst.directives.tables import Table +from docutils.utils import SystemMessagePropagation + +# ============================================================================== +# common globals +# ============================================================================== + +# The version numbering follows numbering of the specification +# (doc/books/kernel-doc-HOWTO). +__version__ = '1.0' + +PY3 = sys.version_info[0] == 3 +PY2 = sys.version_info[0] == 2 + +if PY3: + # pylint: disable=C0103, W0622 + unicode = str + basestring = str + +# ============================================================================== +def setup(app): +# ============================================================================== + + app.add_directive("flat-table", FlatTable) + roles.register_local_role('cspan', c_span) + roles.register_local_role('rspan', r_span) + + return dict( + version = __version__, + parallel_read_safe = True, + parallel_write_safe = True + ) + +# ============================================================================== +def c_span(name, rawtext, text, lineno, inliner, options=None, content=None): +# ============================================================================== + # pylint: disable=W0613 + + options = options if options is not None else {} + content = content if content is not None else [] + nodelist = [colSpan(span=int(text))] + msglist = [] + return nodelist, msglist + +# ============================================================================== +def r_span(name, rawtext, text, lineno, inliner, options=None, content=None): +# ============================================================================== + # pylint: disable=W0613 + + options = options if options is not None else {} + content = content if content is not None else [] + nodelist = [rowSpan(span=int(text))] + msglist = [] + return nodelist, msglist + + +# ============================================================================== +class rowSpan(nodes.General, nodes.Element): pass # pylint: disable=C0103,C0321 +class colSpan(nodes.General, nodes.Element): pass # pylint: disable=C0103,C0321 +# ============================================================================== + +# ============================================================================== +class FlatTable(Table): +# ============================================================================== + + u"""FlatTable (``flat-table``) directive""" + + option_spec = { + 'name': directives.unchanged + , 'class': directives.class_option + , 'header-rows': directives.nonnegative_int + , 'stub-columns': directives.nonnegative_int + , 'widths': directives.positive_int_list + , 'fill-cells' : directives.flag } + + def run(self): + + if not self.content: + error = self.state_machine.reporter.error( + 'The "%s" directive is empty; content required.' % self.name, + nodes.literal_block(self.block_text, self.block_text), + line=self.lineno) + return [error] + + title, messages = self.make_title() + node = nodes.Element() # anonymous container for parsing + self.state.nested_parse(self.content, self.content_offset, node) + + tableBuilder = ListTableBuilder(self) + tableBuilder.parseFlatTableNode(node) + tableNode = tableBuilder.buildTableNode() + # SDK.CONSOLE() # print --> tableNode.asdom().toprettyxml() + if title: + tableNode.insert(0, title) + return [tableNode] + messages + + +# ============================================================================== +class ListTableBuilder(object): +# ============================================================================== + + u"""Builds a table from a double-stage list""" + + def __init__(self, directive): + self.directive = directive + self.rows = [] + self.max_cols = 0 + + def buildTableNode(self): + + colwidths = self.directive.get_column_widths(self.max_cols) + if isinstance(colwidths, tuple): + # Since docutils 0.13, get_column_widths returns a (widths, + # colwidths) tuple, where widths is a string (i.e. 'auto'). + # See https://sourceforge.net/p/docutils/patches/120/. + colwidths = colwidths[1] + stub_columns = self.directive.options.get('stub-columns', 0) + header_rows = self.directive.options.get('header-rows', 0) + + table = nodes.table() + tgroup = nodes.tgroup(cols=len(colwidths)) + table += tgroup + + + for colwidth in colwidths: + colspec = nodes.colspec(colwidth=colwidth) + # FIXME: It seems, that the stub method only works well in the + # absence of rowspan (observed by the html buidler, the docutils-xml + # build seems OK). This is not extraordinary, because there exists + # no table directive (except *this* flat-table) which allows to + # define coexistent of rowspan and stubs (there was no use-case + # before flat-table). This should be reviewed (later). + if stub_columns: + colspec.attributes['stub'] = 1 + stub_columns -= 1 + tgroup += colspec + stub_columns = self.directive.options.get('stub-columns', 0) + + if header_rows: + thead = nodes.thead() + tgroup += thead + for row in self.rows[:header_rows]: + thead += self.buildTableRowNode(row) + + tbody = nodes.tbody() + tgroup += tbody + + for row in self.rows[header_rows:]: + tbody += self.buildTableRowNode(row) + return table + + def buildTableRowNode(self, row_data, classes=None): + classes = [] if classes is None else classes + row = nodes.row() + for cell in row_data: + if cell is None: + continue + cspan, rspan, cellElements = cell + + attributes = {"classes" : classes} + if rspan: + attributes['morerows'] = rspan + if cspan: + attributes['morecols'] = cspan + entry = nodes.entry(**attributes) + entry.extend(cellElements) + row += entry + return row + + def raiseError(self, msg): + error = self.directive.state_machine.reporter.error( + msg + , nodes.literal_block(self.directive.block_text + , self.directive.block_text) + , line = self.directive.lineno ) + raise SystemMessagePropagation(error) + + def parseFlatTableNode(self, node): + u"""parses the node from a :py:class:`FlatTable` directive's body""" + + if len(node) != 1 or not isinstance(node[0], nodes.bullet_list): + self.raiseError( + 'Error parsing content block for the "%s" directive: ' + 'exactly one bullet list expected.' % self.directive.name ) + + for rowNum, rowItem in enumerate(node[0]): + row = self.parseRowItem(rowItem, rowNum) + self.rows.append(row) + self.roundOffTableDefinition() + + def roundOffTableDefinition(self): + u"""Round off the table definition. + + This method rounds off the table definition in :py:member:`rows`. + + * This method inserts the needed ``None`` values for the missing cells + arising from spanning cells over rows and/or columns. + + * recount the :py:member:`max_cols` + + * Autospan or fill (option ``fill-cells``) missing cells on the right + side of the table-row + """ + + y = 0 + while y < len(self.rows): + x = 0 + + while x < len(self.rows[y]): + cell = self.rows[y][x] + if cell is None: + x += 1 + continue + cspan, rspan = cell[:2] + # handle colspan in current row + for c in range(cspan): + try: + self.rows[y].insert(x+c+1, None) + except: # pylint: disable=W0702 + # the user sets ambiguous rowspans + pass # SDK.CONSOLE() + # handle colspan in spanned rows + for r in range(rspan): + for c in range(cspan + 1): + try: + self.rows[y+r+1].insert(x+c, None) + except: # pylint: disable=W0702 + # the user sets ambiguous rowspans + pass # SDK.CONSOLE() + x += 1 + y += 1 + + # Insert the missing cells on the right side. For this, first + # re-calculate the max columns. + + for row in self.rows: + if self.max_cols < len(row): + self.max_cols = len(row) + + # fill with empty cells or cellspan? + + fill_cells = False + if 'fill-cells' in self.directive.options: + fill_cells = True + + for row in self.rows: + x = self.max_cols - len(row) + if x and not fill_cells: + if row[-1] is None: + row.append( ( x - 1, 0, []) ) + else: + cspan, rspan, content = row[-1] + row[-1] = (cspan + x, rspan, content) + elif x and fill_cells: + for i in range(x): + row.append( (0, 0, nodes.comment()) ) + + def pprint(self): + # for debugging + retVal = "[ " + for row in self.rows: + retVal += "[ " + for col in row: + if col is None: + retVal += ('%r' % col) + retVal += "\n , " + else: + content = col[2][0].astext() + if len (content) > 30: + content = content[:30] + "..." + retVal += ('(cspan=%s, rspan=%s, %r)' + % (col[0], col[1], content)) + retVal += "]\n , " + retVal = retVal[:-2] + retVal += "]\n , " + retVal = retVal[:-2] + return retVal + "]" + + def parseRowItem(self, rowItem, rowNum): + row = [] + childNo = 0 + error = False + cell = None + target = None + + for child in rowItem: + if (isinstance(child , nodes.comment) + or isinstance(child, nodes.system_message)): + pass + elif isinstance(child , nodes.target): + target = child + elif isinstance(child, nodes.bullet_list): + childNo += 1 + cell = child + else: + error = True + break + + if childNo != 1 or error: + self.raiseError( + 'Error parsing content block for the "%s" directive: ' + 'two-level bullet list expected, but row %s does not ' + 'contain a second-level bullet list.' + % (self.directive.name, rowNum + 1)) + + for cellItem in cell: + cspan, rspan, cellElements = self.parseCellItem(cellItem) + if target is not None: + cellElements.insert(0, target) + row.append( (cspan, rspan, cellElements) ) + return row + + def parseCellItem(self, cellItem): + # search and remove cspan, rspan colspec from the first element in + # this listItem (field). + cspan = rspan = 0 + if not len(cellItem): + return cspan, rspan, [] + for elem in cellItem[0]: + if isinstance(elem, colSpan): + cspan = elem.get("span") + elem.parent.remove(elem) + continue + if isinstance(elem, rowSpan): + rspan = elem.get("span") + elem.parent.remove(elem) + continue + return cspan, rspan, cellItem[:]