From: Felix Fietkau Date: Sat, 23 Jan 2010 08:28:26 +0000 (+0000) Subject: hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+suppl... X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=64268c716596edbad395cfa82ff30eb84a2f8488;p=librecmc%2Flibrecmc.git hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+supplicant program (wpad) and remove the old wpa_supplicant package SVN-Revision: 19286 --- diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in new file mode 100644 index 0000000000..e185820e5b --- /dev/null +++ b/package/hostapd/Config.in @@ -0,0 +1,22 @@ +# wpa_supplicant config +config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK + bool "Disable timestamp check" + depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini + default n + help + This disables the timestamp check for certificates in wpa_supplicant + Useful for devices without RTC that cannot reliably get the real date/time + +choice + prompt "Choose TLS provider" + default WPA_SUPPLICANT_INTERNAL + depends PACKAGE_wpa-supplicant + +config WPA_SUPPLICANT_INTERNAL + bool "internal" + +config WPA_SUPPLICANT_OPENSSL + bool "openssl" + select PACKAGE_libopenssl + +endchoice diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile index 682d6ab852..cb31b58644 100644 --- a/package/hostapd/Makefile +++ b/package/hostapd/Makefile @@ -23,6 +23,7 @@ PKG_BUILD_DEPENDS:= \ PACKAGE_kmod-mac80211:mac80211 \ PKG_CONFIG_DEPENDS:= \ + CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \ CONFIG_PACKAGE_kmod-ath9k \ CONFIG_PACKAGE_kmod-mac80211 \ CONFIG_PACKAGE_kmod-madwifi \ @@ -30,6 +31,21 @@ PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_hostapd-mini \ CONFIG_PACKAGE_kmod-hostap +LOCAL_TYPE=$(strip \ + $(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \ + $(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \ + hostapd \ + ))) +LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT))) + +ifeq ($(LOCAL_TYPE),supplicant) + ifeq ($(LOCAL_VARIANT),full) + PKG_CONFIG_DEPENDS += \ + CONFIG_WPA_SUPPLICANT_INTERNAL \ + CONFIG_WPA_SUPPLICANT_OPENSSL + endif +endif + PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) include $(INCLUDE_DIR)/package.mk @@ -38,8 +54,21 @@ DRIVER_MAKEOPTS= \ CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \ CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \ CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \ + CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch) \ CONFIG_IEEE80211N=$(CONFIG_PACKAGE_kmod-ath9k) +ifeq ($(LOCAL_TYPE),supplicant) + ifeq ($(LOCAL_VARIANT),full) + DRIVER_MAKEOPTS += $(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),CONFIG_TLS=openssl) + endif +endif + +ifneq ($(LOCAL_TYPE),hostapd) + ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK + TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK + endif +endif + define Package/hostapd/Default SECTION:=net CATEGORY:=Network @@ -80,11 +109,79 @@ define Package/hostapd-utils/description IEEE 802.1x/WPA/EAP/RADIUS Authenticator. endef +define Package/wpad/Default + SECTION:=net + CATEGORY:=Network + TITLE:=IEEE 802.1x Authenticator/Supplicant + URL:=http://hostap.epitest.fi/ + DEPENDS:=@!TARGET_avr32 @!TARGET_etrax +PACKAGE_kmod-mac80211:libnl-tiny +endef + +define Package/wpad +$(call Package/wpad/Default) + TITLE+= (full) + VARIANT:=wpad-full +endef + +define Package/wpad/description + This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS + Authenticator and Supplicant +endef + +define Package/wpad-mini +$(call Package/wpad/Default) + TITLE+= (WPA-PSK only) + VARIANT:=wpad-mini +endef + +define Package/wpad-mini/description + This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only). +endef + +define Package/wpa-supplicant + SECTION:=net + CATEGORY:=Network + TITLE:=WPA Supplicant + URL:=http://hostap.epitest.fi/wpa_supplicant/ + VARIANT:=supplicant-full +endef + +define Package/wpa-supplicant/Description + WPA Supplicant +endef + +define Package/wpa-supplicant/config + source "$(SOURCE)/Config.in" +endef + +define Package/wpa-supplicant-mini + $(Package/wpa-supplicant) + TITLE:=WPA Supplicant (minimal version) + DEPENDS:=$(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),+libopenssl) + VARIANT:=supplicant-mini +endef + +define Package/wpa-supplicant-mini/Description + WPA Supplicant (minimal version) +endef + +define Package/wpa-cli + SECTION:=net + CATEGORY:=Network + DEPENDS:=wpa-supplicant + TITLE:=WPA Supplicant command line interface +endef + +define Package/wpa-cli/Description + WPA Supplicant control utility +endef + + ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED))) - $(warning $(wildcard $(PKG_BUILD_DIR)/.config_*) != $(subst .configured_,.config_,$(STAMP_CONFIGURED))) define Build/Configure/rebuild - $(FIND) $(PKG_BUILD_DIR) -name \*.o | $(XARGS) rm -f + $(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f rm -f $(PKG_BUILD_DIR)/hostapd/hostapd + rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant rm -f $(PKG_BUILD_DIR)/.config_* touch $(subst .configured_,.config_,$(STAMP_CONFIGURED)) endef @@ -92,7 +189,8 @@ endif define Build/Configure $(Build/Configure/rebuild) - $(CP) ./files/$(BUILD_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config + $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config + $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config endef TARGET_CPPFLAGS := \ @@ -108,30 +206,108 @@ ifdef CONFIG_PACKAGE_kmod-mac80211 TARGET_LDFLAGS += -lm -lnl-tiny endif -define Build/Compile +define Build/RunMake CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \ - $(MAKE) -C $(PKG_BUILD_DIR)/hostapd \ + $(MAKE) -C $(PKG_BUILD_DIR)/$(1) \ $(TARGET_CONFIGURE_OPTS) \ $(DRIVER_MAKEOPTS) \ LIBS="$(TARGET_LDFLAGS)" \ - hostapd hostapd_cli + $(2) endef -define Package/hostapd/install +define Build/Compile/wpad + echo ` \ + $(call Build/RunMake,hostapd,MULTICALL=1 dump_cflags); \ + $(call Build/RunMake,wpa_supplicant,dump_cflags) | sed -e 's,$(TARGET_CFLAGS),,' \ + ` > $(PKG_BUILD_DIR)/.cflags + $(call Build/RunMake,hostapd, \ + CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ + MULTICALL=1 \ + hostapd_cli hostapd_multi.a \ + ) + $(call Build/RunMake,wpa_supplicant, \ + CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ + MULTICALL=1 \ + wpa_cli wpa_supplicant_multi.a \ + ) + $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \ + $(TARGET_CFLAGS) \ + ./files/multicall.c \ + $(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \ + $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \ + $(TARGET_LDFLAGS) +endef + +define Build/Compile/hostapd + $(call Build/RunMake,hostapd, \ + hostapd hostapd_cli \ + ) +endef + +define Build/Compile/supplicant + $(call Build/RunMake,wpa_supplicant, \ + wpa_cli wpa_supplicant \ + ) +endef + +define Build/Compile + $(Build/Compile/$(LOCAL_TYPE)) +endef + +define Install/hostapd $(INSTALL_DIR) $(1)/etc/hotplug.d/net $(INSTALL_DATA) ./files/hostapd.hotplug $(1)/etc/hotplug.d/net/ $(INSTALL_DIR) $(1)/lib/wifi $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh $(INSTALL_DIR) $(1)/usr/sbin +endef + +define Install/supplicant + $(INSTALL_DIR) $(1)/lib/wifi + $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh + $(INSTALL_DIR) $(1)/usr/sbin +endef + +define Package/hostapd/install + $(call Install/hostapd,$(1)) $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/ endef Package/hostapd-mini/install = $(Package/hostapd/install) -define Package/hostapd-utils/install +ifneq ($(LOCAL_TYPE),supplicant) + define Package/hostapd-utils/install $(INSTALL_DIR) $(1)/usr/sbin $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/ + endef +endif + +define Package/wpad/install + $(call Install/hostapd,$(1)) + $(call Install/supplicant,$(1)) + $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/ + ln -sf wpad $(1)/usr/sbin/hostapd + ln -sf wpad $(1)/usr/sbin/wpa_supplicant +endef +Package/wpad-mini/install = $(Package/wpad/install) + +define Package/wpa-supplicant/install + $(call Install/supplicant,$(1)) + $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/ endef +Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install) + +ifneq ($(LOCAL_VARIANT),hostapd) + define Package/wpa-cli/install + $(INSTALL_DIR) $(1)/usr/sbin + $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/ + endef +endif $(eval $(call BuildPackage,hostapd)) $(eval $(call BuildPackage,hostapd-mini)) +$(eval $(call BuildPackage,wpad)) +$(eval $(call BuildPackage,wpad-mini)) +$(eval $(call BuildPackage,wpa-supplicant)) +$(eval $(call BuildPackage,wpa-supplicant-mini)) +$(eval $(call BuildPackage,wpa-cli)) $(eval $(call BuildPackage,hostapd-utils)) diff --git a/package/hostapd/files/full.config b/package/hostapd/files/full.config deleted file mode 100644 index 07c924fe90..0000000000 --- a/package/hostapd/files/full.config +++ /dev/null @@ -1,158 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Integrated EAP server -CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove support for RADIUS accounting -#CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -#CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -CONFIG_TLS=internal -CONFIG_INTERNAL_LIBTOMMATH=y -CONFIG_INTERNAL_AES=y -NEED_AES_DEC=y diff --git a/package/hostapd/files/hostapd-full.config b/package/hostapd/files/hostapd-full.config new file mode 100644 index 0000000000..07c924fe90 --- /dev/null +++ b/package/hostapd/files/hostapd-full.config @@ -0,0 +1,158 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove support for RADIUS accounting +#CONFIG_NO_ACCOUNTING=y + +# Remove support for RADIUS +#CONFIG_NO_RADIUS=y + +# Remove support for VLANs +#CONFIG_NO_VLAN=y + +CONFIG_TLS=internal +CONFIG_INTERNAL_LIBTOMMATH=y +CONFIG_INTERNAL_AES=y +NEED_AES_DEC=y diff --git a/package/hostapd/files/hostapd-mini.config b/package/hostapd/files/hostapd-mini.config new file mode 100644 index 0000000000..1720dddbf8 --- /dev/null +++ b/package/hostapd/files/hostapd-mini.config @@ -0,0 +1,155 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +# CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +#CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +#CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +#CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +#CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +#CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +#CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +#CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +#CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +#CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove support for RADIUS accounting +CONFIG_NO_ACCOUNTING=y + +# Remove support for RADIUS +CONFIG_NO_RADIUS=y + +# Remove support for VLANs +#CONFIG_NO_VLAN=y + +CONFIG_TLS=internal diff --git a/package/hostapd/files/mini.config b/package/hostapd/files/mini.config deleted file mode 100644 index 1720dddbf8..0000000000 --- a/package/hostapd/files/mini.config +++ /dev/null @@ -1,155 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -# CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Integrated EAP server -#CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -#CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -#CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -#CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -#CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -#CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -#CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -#CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -#CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove support for RADIUS accounting -CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -CONFIG_TLS=internal diff --git a/package/hostapd/files/multicall.c b/package/hostapd/files/multicall.c new file mode 100644 index 0000000000..c8e814bb5c --- /dev/null +++ b/package/hostapd/files/multicall.c @@ -0,0 +1,28 @@ +#include +#include +#include + +extern int hostapd_main(int argc, char **argv); +extern int wpa_supplicant_main(int argc, char **argv); + +int main(int argc, char **argv) +{ + bool restart = false; + const char *prog = argv[0]; + +restart: + if (strstr(argv[0], "hostapd")) + return hostapd_main(argc, argv); + else if (strstr(argv[0], "wpa_supplicant")) + return wpa_supplicant_main(argc, argv); + + if (!restart && argc > 1) { + argv++; + argc--; + restart = true; + goto restart; + } + + fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd []\n", prog); + return 255; +} diff --git a/package/hostapd/files/wpa_supplicant-full.config b/package/hostapd/files/wpa_supplicant-full.config new file mode 100644 index 0000000000..5e7fd27d1b --- /dev/null +++ b/package/hostapd/files/wpa_supplicant-full.config @@ -0,0 +1,404 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_MADWIFI=y +# Set include directory to the madwifi source tree +#CFLAGS += -I../../madwifi + +# Driver interface for ndiswrapper +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +# CONFIG_DRIVER_ATMEL=y + +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_IPW=y + +# Driver interface for Ralink driver +#CONFIG_DRIVER_RALINK=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Include client MLME (management frame processing) for test driver +# This can be used to test MLME operations in hostapd with the test interface. +# space. +#CONFIG_CLIENT_MLME=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=internal + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +#CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz diff --git a/package/hostapd/files/wpa_supplicant-mini.config b/package/hostapd/files/wpa_supplicant-mini.config new file mode 100644 index 0000000000..843b64a7d1 --- /dev/null +++ b/package/hostapd/files/wpa_supplicant-mini.config @@ -0,0 +1,404 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_MADWIFI=y +# Set include directory to the madwifi source tree +#CFLAGS += -I../../madwifi + +# Driver interface for ndiswrapper +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +# CONFIG_DRIVER_ATMEL=y + +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_IPW=y + +# Driver interface for Ralink driver +#CONFIG_DRIVER_RALINK=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Include client MLME (management frame processing) for test driver +# This can be used to test MLME operations in hostapd with the test interface. +# space. +#CONFIG_CLIENT_MLME=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +# CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +# CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +# CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +# CONFIG_EAP_TLS=y + +# EAL-PEAP +# CONFIG_EAP_PEAP=y + +# EAP-TTLS +# CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# EAP-GTC +# CONFIG_EAP_GTC=y + +# EAP-OTP +# CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +# CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +# CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +# CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +# CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=internal + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +#CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz diff --git a/package/hostapd/files/wpa_supplicant.sh b/package/hostapd/files/wpa_supplicant.sh new file mode 100644 index 0000000000..8f7f503c1f --- /dev/null +++ b/package/hostapd/files/wpa_supplicant.sh @@ -0,0 +1,117 @@ +wpa_supplicant_setup_vif() { + local vif="$1" + local driver="$2" + local key="$key" + + # wpa_supplicant should use wext for mac80211 cards + [ "$driver" = "mac80211" ] && driver='wext' + + # make sure we have the psk + [ -n "$key" ] || { + config_get key "$vif" key + } + + case "$enc" in + *wep*) + key_mgmt='NONE' + config_get key "$vif" key + key="${key:-1}" + case "$key" in + [1234]) + for idx in 1 2 3 4; do + local zidx + zidx=$(($idx - 1)) + config_get ckey "$vif" "key${idx}" + [ -n "$ckey" ] && \ + append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")" + done + wep_tx_keyidx="wep_tx_keyidx=$((key - 1))" + ;; + *) + wep_key0="wep_key0=$(prepare_key_wep "$key")" + wep_tx_keyidx="wep_tx_keyidx=0" + ;; + esac + ;; + *psk*) + key_mgmt='WPA-PSK' + config_get_bool usepassphrase "$vif" passphrase 1 + case "$enc" in + *psk2*) + proto='proto=RSN' + if [ "$usepassphrase" = "1" ]; then + passphrase="psk=\"${key}\"" + else + passphrase="psk=${key}" + fi + ;; + *psk*) + proto='proto=WPA' + if [ "$usepassphrase" = "1" ]; then + passphrase="psk=\"${key}\"" + else + passphrase="psk=${key}" + fi + ;; + esac + ;; + *wpa*|*8021x*) + proto='proto=WPA2' + key_mgmt='WPA-EAP' + config_get ca_cert "$vif" ca_cert + ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""} + case "$eap_type" in + tls) + pairwise='pairwise=CCMP' + group='group=CCMP' + config_get priv_key "$vif" priv_key + config_get priv_key_pwd "$vif" priv_key_pwd + priv_key="private_key=\"$priv_key\"" + priv_key_pwd="private_key_passwd=\"$priv_key_pwd\"" + ;; + peap|ttls) + config_get auth "$vif" auth + config_get identity "$vif" identity + config_get password "$vif" password + phase2="phase2=\"auth=${auth:-MSCHAPV2}\"" + identity="identity=\"$identity\"" + password="password=\"$password\"" + ;; + esac + eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')" + ;; + esac + config_get ifname "$vif" ifname + config_get bridge "$vif" bridge + config_get ssid "$vif" ssid + config_get bssid "$vif" bssid + bssid=${bssid:+"bssid=$bssid"} + rm -rf /var/run/wpa_supplicant-$ifname + cat > /var/run/wpa_supplicant-$ifname.conf <wpa_debug_file_path); + if (params->wpa_debug_syslog) + wpa_debug_open_syslog(); +--- a/hostapd/main.c ++++ b/hostapd/main.c +@@ -478,6 +478,9 @@ static void usage(void) + exit(1); + } + ++void hostapd_wpa_event(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data); ++ + + int main(int argc, char *argv[]) + { +@@ -489,6 +492,7 @@ int main(int argc, char *argv[]) + if (os_program_init()) + return -1; + ++ wpa_supplicant_event = hostapd_wpa_event; + for (;;) { + c = getopt(argc, argv, "BdhKP:tv"); + if (c < 0) +--- a/src/drivers/drivers.c ++++ b/src/drivers/drivers.c +@@ -13,7 +13,11 @@ + */ + + #include "includes.h" ++#include "common.h" ++#include "driver.h" + ++void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data); + + #ifdef CONFIG_DRIVER_WEXT + extern struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */ diff --git a/package/hostapd/patches/300-timestamp_check.patch b/package/hostapd/patches/300-timestamp_check.patch new file mode 100644 index 0000000000..fef63e30a4 --- /dev/null +++ b/package/hostapd/patches/300-timestamp_check.patch @@ -0,0 +1,15 @@ +--- a/src/tls/x509v3.c ++++ b/src/tls/x509v3.c +@@ -1832,8 +1832,11 @@ int x509_certificate_chain_validate(stru + if (chain_trusted) + continue; + +- if ((unsigned long) now.sec < ++ if ( ++#ifndef NO_TIMESTAMP_CHECK ++ (unsigned long) now.sec < + (unsigned long) cert->not_before || ++#endif + (unsigned long) now.sec > + (unsigned long) cert->not_after) { + wpa_printf(MSG_INFO, "X509: Certificate not valid " diff --git a/package/hostapd/patches/310-scan_ssid.patch b/package/hostapd/patches/310-scan_ssid.patch new file mode 100644 index 0000000000..5a7e10f6b7 --- /dev/null +++ b/package/hostapd/patches/310-scan_ssid.patch @@ -0,0 +1,37 @@ +--- a/wpa_supplicant/scan.c ++++ b/wpa_supplicant/scan.c +@@ -215,6 +215,7 @@ static void wpa_supplicant_scan(void *el + enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO; + #endif /* CONFIG_WPS */ + struct wpa_driver_scan_params params; ++ int scan_ssid_all = 1; + size_t max_ssids; + + if (wpa_s->disconnected && !wpa_s->scan_req) { +@@ -275,6 +276,16 @@ static void wpa_supplicant_scan(void *el + wpa_s->wpa_state == WPA_INACTIVE) + wpa_supplicant_set_state(wpa_s, WPA_SCANNING); + ++ /* check if all configured ssids should be scanned directly */ ++ ssid = wpa_s->conf->ssid; ++ while (ssid) { ++ if (!ssid->scan_ssid) { ++ scan_ssid_all = 0; ++ break; ++ } ++ ssid = ssid->next; ++ } ++ + /* Find the starting point from which to continue scanning */ + ssid = wpa_s->conf->ssid; + if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) { +@@ -336,6 +347,9 @@ static void wpa_supplicant_scan(void *el + int_array_sort_unique(params.freqs); + } + ++ if (scan_ssid_all && !ssid) ++ ssid = wpa_s->conf->ssid; ++ + if (ssid) { + wpa_s->prev_scan_ssid = ssid; + if (max_ssids > 1) { diff --git a/package/hostapd/patches/320-rescan_immediately.patch b/package/hostapd/patches/320-rescan_immediately.patch new file mode 100644 index 0000000000..a4020bc1dd --- /dev/null +++ b/package/hostapd/patches/320-rescan_immediately.patch @@ -0,0 +1,11 @@ +--- a/wpa_supplicant/events.c ++++ b/wpa_supplicant/events.c +@@ -843,7 +843,7 @@ static void wpa_supplicant_event_scan_re + wpa_printf(MSG_DEBUG, "Setup a new network"); + wpa_supplicant_associate(wpa_s, NULL, ssid); + } else +- wpa_supplicant_req_new_scan(wpa_s, 5); ++ wpa_supplicant_req_new_scan(wpa_s, 0); + } + } + #endif /* CONFIG_NO_SCAN_PROCESSING */ diff --git a/package/hostapd/patches/330-madwifi_merge.patch b/package/hostapd/patches/330-madwifi_merge.patch new file mode 100644 index 0000000000..e3a89d1be6 --- /dev/null +++ b/package/hostapd/patches/330-madwifi_merge.patch @@ -0,0 +1,767 @@ +--- a/src/drivers/driver_madwifi.c ++++ b/src/drivers/driver_madwifi.c +@@ -71,7 +71,6 @@ + + #define WPA_KEY_RSC_LEN 8 + +-#ifdef HOSTAPD + + #include "priv_netlink.h" + #include "netlink.h" +@@ -82,17 +81,22 @@ + struct madwifi_driver_data { + struct hostapd_data *hapd; /* back pointer */ + +- char iface[IFNAMSIZ + 1]; ++ void *wext; /* private data for driver_wext */ ++ void *ctx; ++ char ifname[IFNAMSIZ + 1]; ++ int ioctl_sock; /* socket for ioctl() use */ ++ ++#ifdef HOSTAPD + int ifindex; + struct l2_packet_data *sock_xmit; /* raw packet xmit socket */ + struct l2_packet_data *sock_recv; /* raw packet recv socket */ +- int ioctl_sock; /* socket for ioctl() use */ + struct netlink_data *netlink; + int we_version; + u8 acct_mac[ETH_ALEN]; + struct hostap_sta_driver_data acct_data; + + struct l2_packet_data *sock_raw; /* raw 802.11 management frames */ ++#endif + }; + + static int madwifi_sta_deauth(void *priv, const u8 *own_addr, const u8 *addr, +@@ -105,7 +109,7 @@ set80211priv(struct madwifi_driver_data + int do_inline = len < IFNAMSIZ; + + memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ); ++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); + #ifdef IEEE80211_IOCTL_FILTERFRAME + /* FILTERFRAME must be NOT inline, regardless of size. */ + if (op == IEEE80211_IOCTL_FILTERFRAME) +@@ -206,7 +210,7 @@ set80211param(struct madwifi_driver_data + struct iwreq iwr; + + memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ); ++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); + iwr.u.mode = op; + memcpy(iwr.u.name+sizeof(__u32), &arg, sizeof(arg)); + +@@ -233,6 +237,7 @@ ether_sprintf(const u8 *addr) + } + #endif /* CONFIG_NO_STDOUT_DEBUG */ + ++#ifdef HOSTAPD + /* + * Configure WPA parameters. + */ +@@ -395,7 +400,7 @@ madwifi_sta_set_flags(void *priv, const + return madwifi_set_sta_authorized(priv, addr, 0); + return 0; + } +- ++#endif /* HOSTAPD */ + static int + madwifi_del_key(void *priv, const u8 *addr, int key_idx) + { +@@ -407,28 +412,20 @@ madwifi_del_key(void *priv, const u8 *ad + __func__, ether_sprintf(addr), key_idx); + + memset(&wk, 0, sizeof(wk)); ++ wk.idk_keyix = key_idx; + if (addr != NULL) { + memcpy(wk.idk_macaddr, addr, IEEE80211_ADDR_LEN); +- wk.idk_keyix = (u8) IEEE80211_KEYIX_NONE; +- } else { +- wk.idk_keyix = key_idx; +- } +- +- ret = set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk)); +- if (ret < 0) { +- wpa_printf(MSG_DEBUG, "%s: Failed to delete key (addr %s" +- " key_idx %d)", __func__, ether_sprintf(addr), +- key_idx); + } + +- return ret; ++ set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk)); ++ return 0; + } + + static int +-wpa_driver_madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg, +- const u8 *addr, int key_idx, int set_tx, +- const u8 *seq, size_t seq_len, +- const u8 *key, size_t key_len) ++madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg, ++ const u8 *addr, int key_idx, int set_tx, ++ const u8 *seq, size_t seq_len, ++ const u8 *key, size_t key_len) + { + struct madwifi_driver_data *drv = priv; + struct ieee80211req_key wk; +@@ -462,10 +459,14 @@ wpa_driver_madwifi_set_key(const char *i + memset(&wk, 0, sizeof(wk)); + wk.ik_type = cipher; + wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT; ++ + if (addr == NULL) { + memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN); + wk.ik_keyix = key_idx; + wk.ik_flags |= IEEE80211_KEY_DEFAULT; ++ } else if (!memcmp(addr, "\xff\xff\xff\xff\xff\xff", ETH_ALEN)) { ++ wk.ik_flags |= IEEE80211_KEY_GROUP; ++ memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN); + } else { + memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN); + wk.ik_keyix = IEEE80211_KEYIX_NONE; +@@ -485,6 +486,7 @@ wpa_driver_madwifi_set_key(const char *i + } + + ++#ifdef HOSTAPD + static int + madwifi_get_seqnum(const char *ifname, void *priv, const u8 *addr, int idx, + u8 *seq) +@@ -591,7 +593,7 @@ madwifi_read_sta_driver_data(void *priv, + + memset(data, 0, sizeof(*data)); + snprintf(buf, sizeof(buf), "/proc/net/madwifi/%s/" MACSTR, +- drv->iface, MAC2STR(addr)); ++ drv->ifname, MAC2STR(addr)); + + f = fopen(buf, "r"); + if (!f) { +@@ -757,7 +759,7 @@ static int madwifi_receive_probe_req(str + if (ret) + return ret; + +- drv->sock_raw = l2_packet_init(drv->iface, NULL, ETH_P_80211_RAW, ++ drv->sock_raw = l2_packet_init(drv->ifname, NULL, ETH_P_80211_RAW, + madwifi_raw_receive, drv, 1); + if (drv->sock_raw == NULL) + return -1; +@@ -1017,7 +1019,7 @@ madwifi_get_we_version(struct madwifi_dr + return -1; + + memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ); ++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); + iwr.u.data.pointer = (caddr_t) range; + iwr.u.data.length = buflen; + +@@ -1134,17 +1136,17 @@ madwifi_init(struct hostapd_data *hapd, + perror("socket[PF_INET,SOCK_DGRAM]"); + goto bad; + } +- memcpy(drv->iface, params->ifname, sizeof(drv->iface)); ++ memcpy(drv->ifname, params->ifname, sizeof(drv->ifname)); + + memset(&ifr, 0, sizeof(ifr)); +- os_strlcpy(ifr.ifr_name, drv->iface, sizeof(ifr.ifr_name)); ++ os_strlcpy(ifr.ifr_name, drv->ifname, sizeof(ifr.ifr_name)); + if (ioctl(drv->ioctl_sock, SIOCGIFINDEX, &ifr) != 0) { + perror("ioctl(SIOCGIFINDEX)"); + goto bad; + } + drv->ifindex = ifr.ifr_ifindex; + +- drv->sock_xmit = l2_packet_init(drv->iface, NULL, ETH_P_EAPOL, ++ drv->sock_xmit = l2_packet_init(drv->ifname, NULL, ETH_P_EAPOL, + handle_read, drv, 1); + if (drv->sock_xmit == NULL) + goto bad; +@@ -1158,7 +1160,7 @@ madwifi_init(struct hostapd_data *hapd, + 1); + if (drv->sock_recv == NULL) + goto bad; +- } else if (linux_br_get(brname, drv->iface) == 0) { ++ } else if (linux_br_get(brname, drv->ifname) == 0) { + wpa_printf(MSG_DEBUG, "Interface in bridge %s; configure for " + "EAPOL receive", brname); + drv->sock_recv = l2_packet_init(brname, NULL, ETH_P_EAPOL, +@@ -1169,7 +1171,7 @@ madwifi_init(struct hostapd_data *hapd, + drv->sock_recv = drv->sock_xmit; + + memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ); ++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); + + iwr.u.mode = IW_MODE_MASTER; + +@@ -1179,7 +1181,7 @@ madwifi_init(struct hostapd_data *hapd, + goto bad; + } + +- madwifi_set_privacy(drv->iface, drv, 0); /* default to no privacy */ ++ madwifi_set_privacy(drv->ifname, drv, 0); /* default to no privacy */ + + madwifi_receive_probe_req(drv); + +@@ -1204,7 +1206,7 @@ madwifi_deinit(void *priv) + struct madwifi_driver_data *drv = priv; + + netlink_deinit(drv->netlink); +- (void) linux_set_iface_flags(drv->ioctl_sock, drv->iface, 0); ++ (void) linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 0); + if (drv->ioctl_sock >= 0) + close(drv->ioctl_sock); + if (drv->sock_recv != NULL && drv->sock_recv != drv->sock_xmit) +@@ -1223,7 +1225,7 @@ madwifi_set_ssid(const char *ifname, voi + struct iwreq iwr; + + memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ); ++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); + iwr.u.essid.flags = 1; /* SSID active */ + iwr.u.essid.pointer = (caddr_t) buf; + iwr.u.essid.length = len + 1; +@@ -1244,7 +1246,7 @@ madwifi_get_ssid(const char *ifname, voi + int ret = 0; + + memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ); ++ os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); + iwr.u.essid.pointer = (caddr_t) buf; + iwr.u.essid.length = len; + +@@ -1271,137 +1273,16 @@ madwifi_commit(void *priv) + return 0; + } + +-#else /* HOSTAPD */ ++#endif /* HOSTAPD */ + +-struct wpa_driver_madwifi_data { +- void *wext; /* private data for driver_wext */ +- void *ctx; +- char ifname[IFNAMSIZ + 1]; +- int sock; +-}; ++#if !defined(NO_SUPPLICANT) + + static int wpa_driver_madwifi_set_auth_alg(void *priv, int auth_alg); + static int wpa_driver_madwifi_set_probe_req_ie(void *priv, const u8 *ies, + size_t ies_len); + +- +-static int +-set80211priv(struct wpa_driver_madwifi_data *drv, int op, void *data, int len, +- int show_err) +-{ +- struct iwreq iwr; +- +- os_memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); +- if (len < IFNAMSIZ && +- op != IEEE80211_IOCTL_SET_APPIEBUF) { +- /* +- * Argument data fits inline; put it there. +- */ +- os_memcpy(iwr.u.name, data, len); +- } else { +- /* +- * Argument data too big for inline transfer; setup a +- * parameter block instead; the kernel will transfer +- * the data for the driver. +- */ +- iwr.u.data.pointer = data; +- iwr.u.data.length = len; +- } +- +- if (ioctl(drv->sock, op, &iwr) < 0) { +- if (show_err) { +-#ifdef MADWIFI_NG +- int first = IEEE80211_IOCTL_SETPARAM; +- int last = IEEE80211_IOCTL_KICKMAC; +- static const char *opnames[] = { +- "ioctl[IEEE80211_IOCTL_SETPARAM]", +- "ioctl[IEEE80211_IOCTL_GETPARAM]", +- "ioctl[IEEE80211_IOCTL_SETMODE]", +- "ioctl[IEEE80211_IOCTL_GETMODE]", +- "ioctl[IEEE80211_IOCTL_SETWMMPARAMS]", +- "ioctl[IEEE80211_IOCTL_GETWMMPARAMS]", +- "ioctl[IEEE80211_IOCTL_SETCHANLIST]", +- "ioctl[IEEE80211_IOCTL_GETCHANLIST]", +- "ioctl[IEEE80211_IOCTL_CHANSWITCH]", +- NULL, +- "ioctl[IEEE80211_IOCTL_SET_APPIEBUF]", +- "ioctl[IEEE80211_IOCTL_GETSCANRESULTS]", +- NULL, +- "ioctl[IEEE80211_IOCTL_GETCHANINFO]", +- "ioctl[IEEE80211_IOCTL_SETOPTIE]", +- "ioctl[IEEE80211_IOCTL_GETOPTIE]", +- "ioctl[IEEE80211_IOCTL_SETMLME]", +- NULL, +- "ioctl[IEEE80211_IOCTL_SETKEY]", +- NULL, +- "ioctl[IEEE80211_IOCTL_DELKEY]", +- NULL, +- "ioctl[IEEE80211_IOCTL_ADDMAC]", +- NULL, +- "ioctl[IEEE80211_IOCTL_DELMAC]", +- NULL, +- "ioctl[IEEE80211_IOCTL_WDSMAC]", +- NULL, +- "ioctl[IEEE80211_IOCTL_WDSDELMAC]", +- NULL, +- "ioctl[IEEE80211_IOCTL_KICKMAC]", +- }; +-#else /* MADWIFI_NG */ +- int first = IEEE80211_IOCTL_SETPARAM; +- int last = IEEE80211_IOCTL_CHANLIST; +- static const char *opnames[] = { +- "ioctl[IEEE80211_IOCTL_SETPARAM]", +- "ioctl[IEEE80211_IOCTL_GETPARAM]", +- "ioctl[IEEE80211_IOCTL_SETKEY]", +- "ioctl[IEEE80211_IOCTL_GETKEY]", +- "ioctl[IEEE80211_IOCTL_DELKEY]", +- NULL, +- "ioctl[IEEE80211_IOCTL_SETMLME]", +- NULL, +- "ioctl[IEEE80211_IOCTL_SETOPTIE]", +- "ioctl[IEEE80211_IOCTL_GETOPTIE]", +- "ioctl[IEEE80211_IOCTL_ADDMAC]", +- NULL, +- "ioctl[IEEE80211_IOCTL_DELMAC]", +- NULL, +- "ioctl[IEEE80211_IOCTL_CHANLIST]", +- }; +-#endif /* MADWIFI_NG */ +- int idx = op - first; +- if (first <= op && op <= last && +- idx < (int) (sizeof(opnames) / sizeof(opnames[0])) +- && opnames[idx]) +- perror(opnames[idx]); +- else +- perror("ioctl[unknown???]"); +- } +- return -1; +- } +- return 0; +-} +- + static int +-set80211param(struct wpa_driver_madwifi_data *drv, int op, int arg, +- int show_err) +-{ +- struct iwreq iwr; +- +- os_memset(&iwr, 0, sizeof(iwr)); +- os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); +- iwr.u.mode = op; +- os_memcpy(iwr.u.name+sizeof(u32), &arg, sizeof(arg)); +- +- if (ioctl(drv->sock, IEEE80211_IOCTL_SETPARAM, &iwr) < 0) { +- if (show_err) +- perror("ioctl[IEEE80211_IOCTL_SETPARAM]"); +- return -1; +- } +- return 0; +-} +- +-static int +-wpa_driver_madwifi_set_wpa_ie(struct wpa_driver_madwifi_data *drv, ++wpa_driver_madwifi_set_wpa_ie(struct madwifi_driver_data *drv, + const u8 *wpa_ie, size_t wpa_ie_len) + { + struct iwreq iwr; +@@ -1412,7 +1293,7 @@ wpa_driver_madwifi_set_wpa_ie(struct wpa + iwr.u.data.pointer = (void *) wpa_ie; + iwr.u.data.length = wpa_ie_len; + +- if (ioctl(drv->sock, IEEE80211_IOCTL_SETOPTIE, &iwr) < 0) { ++ if (ioctl(drv->ioctl_sock, IEEE80211_IOCTL_SETOPTIE, &iwr) < 0) { + perror("ioctl[IEEE80211_IOCTL_SETOPTIE]"); + return -1; + } +@@ -1420,156 +1301,51 @@ wpa_driver_madwifi_set_wpa_ie(struct wpa + } + + static int +-wpa_driver_madwifi_del_key(struct wpa_driver_madwifi_data *drv, int key_idx, +- const u8 *addr) +-{ +- struct ieee80211req_del_key wk; +- +- wpa_printf(MSG_DEBUG, "%s: keyidx=%d", __FUNCTION__, key_idx); +- os_memset(&wk, 0, sizeof(wk)); +- wk.idk_keyix = key_idx; +- if (addr != NULL) +- os_memcpy(wk.idk_macaddr, addr, IEEE80211_ADDR_LEN); +- +- return set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk), 1); +-} +- +-static int +-wpa_driver_madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg, +- const u8 *addr, int key_idx, int set_tx, +- const u8 *seq, size_t seq_len, +- const u8 *key, size_t key_len) +-{ +- struct wpa_driver_madwifi_data *drv = priv; +- struct ieee80211req_key wk; +- char *alg_name; +- u_int8_t cipher; +- +- if (alg == WPA_ALG_NONE) +- return wpa_driver_madwifi_del_key(drv, key_idx, addr); +- +- switch (alg) { +- case WPA_ALG_WEP: +- if (addr == NULL || os_memcmp(addr, "\xff\xff\xff\xff\xff\xff", +- ETH_ALEN) == 0) { +- /* +- * madwifi did not seem to like static WEP key +- * configuration with IEEE80211_IOCTL_SETKEY, so use +- * Linux wireless extensions ioctl for this. +- */ +- return wpa_driver_wext_set_key(ifname, drv->wext, alg, +- addr, key_idx, set_tx, +- seq, seq_len, +- key, key_len); +- } +- alg_name = "WEP"; +- cipher = IEEE80211_CIPHER_WEP; +- break; +- case WPA_ALG_TKIP: +- alg_name = "TKIP"; +- cipher = IEEE80211_CIPHER_TKIP; +- break; +- case WPA_ALG_CCMP: +- alg_name = "CCMP"; +- cipher = IEEE80211_CIPHER_AES_CCM; +- break; +- default: +- wpa_printf(MSG_DEBUG, "%s: unknown/unsupported algorithm %d", +- __FUNCTION__, alg); +- return -1; +- } +- +- wpa_printf(MSG_DEBUG, "%s: alg=%s key_idx=%d set_tx=%d seq_len=%lu " +- "key_len=%lu", __FUNCTION__, alg_name, key_idx, set_tx, +- (unsigned long) seq_len, (unsigned long) key_len); +- +- if (seq_len > sizeof(u_int64_t)) { +- wpa_printf(MSG_DEBUG, "%s: seq_len %lu too big", +- __FUNCTION__, (unsigned long) seq_len); +- return -2; +- } +- if (key_len > sizeof(wk.ik_keydata)) { +- wpa_printf(MSG_DEBUG, "%s: key length %lu too big", +- __FUNCTION__, (unsigned long) key_len); +- return -3; +- } +- +- os_memset(&wk, 0, sizeof(wk)); +- wk.ik_type = cipher; +- wk.ik_flags = IEEE80211_KEY_RECV; +- if (addr == NULL || +- os_memcmp(addr, "\xff\xff\xff\xff\xff\xff", ETH_ALEN) == 0) +- wk.ik_flags |= IEEE80211_KEY_GROUP; +- if (set_tx) { +- wk.ik_flags |= IEEE80211_KEY_XMIT | IEEE80211_KEY_DEFAULT; +- os_memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN); +- } else +- os_memset(wk.ik_macaddr, 0, IEEE80211_ADDR_LEN); +- wk.ik_keyix = key_idx; +- wk.ik_keylen = key_len; +-#ifdef WORDS_BIGENDIAN +- { +- size_t i; +- u8 tmp[WPA_KEY_RSC_LEN]; +- os_memset(tmp, 0, sizeof(tmp)); +- for (i = 0; i < seq_len; i++) +- tmp[WPA_KEY_RSC_LEN - i - 1] = seq[i]; +- os_memcpy(&wk.ik_keyrsc, tmp, WPA_KEY_RSC_LEN); +- } +-#else /* WORDS_BIGENDIAN */ +- os_memcpy(&wk.ik_keyrsc, seq, seq_len); +-#endif /* WORDS_BIGENDIAN */ +- os_memcpy(wk.ik_keydata, key, key_len); +- +- return set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk), 1); +-} +- +-static int + wpa_driver_madwifi_set_countermeasures(void *priv, int enabled) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled); +- return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled, 1); ++ return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled); + } + + static int + wpa_driver_madwifi_deauthenticate(void *priv, const u8 *addr, int reason_code) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + struct ieee80211req_mlme mlme; + + wpa_printf(MSG_DEBUG, "%s", __FUNCTION__); + mlme.im_op = IEEE80211_MLME_DEAUTH; + mlme.im_reason = reason_code; + os_memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN); +- return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme), 1); ++ return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme)); + } + + static int + wpa_driver_madwifi_disassociate(void *priv, const u8 *addr, int reason_code) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + struct ieee80211req_mlme mlme; + + wpa_printf(MSG_DEBUG, "%s", __FUNCTION__); + mlme.im_op = IEEE80211_MLME_DISASSOC; + mlme.im_reason = reason_code; + os_memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN); +- return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme), 1); ++ return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme)); + } + + static int + wpa_driver_madwifi_associate(void *priv, + struct wpa_driver_associate_params *params) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + struct ieee80211req_mlme mlme; + int ret = 0, privacy = 1; + + wpa_printf(MSG_DEBUG, "%s", __FUNCTION__); + + if (set80211param(drv, IEEE80211_PARAM_DROPUNENCRYPTED, +- params->drop_unencrypted, 1) < 0) ++ params->drop_unencrypted) < 0) + ret = -1; + if (wpa_driver_madwifi_set_auth_alg(drv, params->auth_alg) < 0) + ret = -1; +@@ -1592,12 +1368,12 @@ wpa_driver_madwifi_associate(void *priv, + params->wpa_ie_len == 0) + privacy = 0; + +- if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy, 1) < 0) ++ if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy) < 0) + ret = -1; + + if (params->wpa_ie_len && + set80211param(drv, IEEE80211_PARAM_WPA, +- params->wpa_ie[0] == WLAN_EID_RSN ? 2 : 1, 1) < 0) ++ params->wpa_ie[0] == WLAN_EID_RSN ? 2 : 1) < 0) + ret = -1; + + if (params->bssid == NULL) { +@@ -1605,14 +1381,14 @@ wpa_driver_madwifi_associate(void *priv, + * roaming */ + /* FIX: this does not seem to work; would probably need to + * change something in the driver */ +- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0) ++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0) < 0) + ret = -1; + + if (wpa_driver_wext_set_ssid(drv->wext, params->ssid, + params->ssid_len) < 0) + ret = -1; + } else { +- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0) ++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2) < 0) + ret = -1; + if (wpa_driver_wext_set_ssid(drv->wext, params->ssid, + params->ssid_len) < 0) +@@ -1621,7 +1397,7 @@ wpa_driver_madwifi_associate(void *priv, + mlme.im_op = IEEE80211_MLME_ASSOC; + os_memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN); + if (set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, +- sizeof(mlme), 1) < 0) { ++ sizeof(mlme)) < 0) { + wpa_printf(MSG_DEBUG, "%s: SETMLME[ASSOC] failed", + __func__); + ret = -1; +@@ -1634,7 +1410,7 @@ wpa_driver_madwifi_associate(void *priv, + static int + wpa_driver_madwifi_set_auth_alg(void *priv, int auth_alg) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + int authmode; + + if ((auth_alg & WPA_AUTH_ALG_OPEN) && +@@ -1645,13 +1421,13 @@ wpa_driver_madwifi_set_auth_alg(void *pr + else + authmode = IEEE80211_AUTH_OPEN; + +- return set80211param(drv, IEEE80211_PARAM_AUTHMODE, authmode, 1); ++ return set80211param(drv, IEEE80211_PARAM_AUTHMODE, authmode); + } + + static int + wpa_driver_madwifi_scan(void *priv, struct wpa_driver_scan_params *params) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + struct iwreq iwr; + int ret = 0; + const u8 *ssid = params->ssids[0].ssid; +@@ -1669,7 +1445,7 @@ wpa_driver_madwifi_scan(void *priv, stru + if (wpa_driver_wext_set_ssid(drv->wext, ssid, ssid_len) < 0) + ret = -1; + +- if (ioctl(drv->sock, SIOCSIWSCAN, &iwr) < 0) { ++ if (ioctl(drv->ioctl_sock, SIOCSIWSCAN, &iwr) < 0) { + perror("ioctl[SIOCSIWSCAN]"); + ret = -1; + } +@@ -1691,14 +1467,14 @@ wpa_driver_madwifi_scan(void *priv, stru + + static int wpa_driver_madwifi_get_bssid(void *priv, u8 *bssid) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + return wpa_driver_wext_get_bssid(drv->wext, bssid); + } + + + static int wpa_driver_madwifi_get_ssid(void *priv, u8 *ssid) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + return wpa_driver_wext_get_ssid(drv->wext, ssid); + } + +@@ -1706,14 +1482,14 @@ static int wpa_driver_madwifi_get_ssid(v + static struct wpa_scan_results * + wpa_driver_madwifi_get_scan_results(void *priv) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + return wpa_driver_wext_get_scan_results(drv->wext); + } + + + static int wpa_driver_madwifi_set_operstate(void *priv, int state) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + return wpa_driver_wext_set_operstate(drv->wext, state); + } + +@@ -1734,7 +1510,7 @@ static int wpa_driver_madwifi_set_probe_ + + ret = set80211priv(priv, IEEE80211_IOCTL_SET_APPIEBUF, probe_req_ie, + sizeof(struct ieee80211req_getset_appiebuf) + +- ies_len, 1); ++ ies_len); + + os_free(probe_req_ie); + +@@ -1744,7 +1520,7 @@ static int wpa_driver_madwifi_set_probe_ + + static void * wpa_driver_madwifi_init(void *ctx, const char *ifname) + { +- struct wpa_driver_madwifi_data *drv; ++ struct madwifi_driver_data *drv; + + drv = os_zalloc(sizeof(*drv)); + if (drv == NULL) +@@ -1755,17 +1531,17 @@ static void * wpa_driver_madwifi_init(vo + + drv->ctx = ctx; + os_strlcpy(drv->ifname, ifname, sizeof(drv->ifname)); +- drv->sock = socket(PF_INET, SOCK_DGRAM, 0); +- if (drv->sock < 0) ++ drv->ioctl_sock = socket(PF_INET, SOCK_DGRAM, 0); ++ if (drv->ioctl_sock < 0) + goto fail2; + +- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0) { ++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2) < 0) { + wpa_printf(MSG_DEBUG, "%s: failed to set wpa_supplicant-based " + "roaming", __FUNCTION__); + goto fail3; + } + +- if (set80211param(drv, IEEE80211_PARAM_WPA, 3, 1) < 0) { ++ if (set80211param(drv, IEEE80211_PARAM_WPA, 3) < 0) { + wpa_printf(MSG_DEBUG, "%s: failed to enable WPA support", + __FUNCTION__); + goto fail3; +@@ -1774,7 +1550,7 @@ static void * wpa_driver_madwifi_init(vo + return drv; + + fail3: +- close(drv->sock); ++ close(drv->ioctl_sock); + fail2: + wpa_driver_wext_deinit(drv->wext); + fail: +@@ -1785,38 +1561,37 @@ fail: + + static void wpa_driver_madwifi_deinit(void *priv) + { +- struct wpa_driver_madwifi_data *drv = priv; ++ struct madwifi_driver_data *drv = priv; + + if (wpa_driver_madwifi_set_wpa_ie(drv, NULL, 0) < 0) { + wpa_printf(MSG_DEBUG, "%s: failed to clear WPA IE", + __FUNCTION__); + } +- if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0) { ++ if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0) < 0) { + wpa_printf(MSG_DEBUG, "%s: failed to enable driver-based " + "roaming", __FUNCTION__); + } +- if (set80211param(drv, IEEE80211_PARAM_PRIVACY, 0, 1) < 0) { ++ if (set80211param(drv, IEEE80211_PARAM_PRIVACY, 0) < 0) { + wpa_printf(MSG_DEBUG, "%s: failed to disable forced Privacy " + "flag", __FUNCTION__); + } +- if (set80211param(drv, IEEE80211_PARAM_WPA, 0, 1) < 0) { ++ if (set80211param(drv, IEEE80211_PARAM_WPA, 0) < 0) { + wpa_printf(MSG_DEBUG, "%s: failed to disable WPA", + __FUNCTION__); + } + + wpa_driver_wext_deinit(drv->wext); + +- close(drv->sock); ++ close(drv->ioctl_sock); + os_free(drv); + } + +-#endif /* HOSTAPD */ +- ++#endif + + const struct wpa_driver_ops wpa_driver_madwifi_ops = { + .name = "madwifi", + .desc = "MADWIFI 802.11 support (Atheros, etc.)", +- .set_key = wpa_driver_madwifi_set_key, ++ .set_key = madwifi_set_key, + #ifdef HOSTAPD + .hapd_init = madwifi_init, + .hapd_deinit = madwifi_deinit, +@@ -1836,7 +1611,8 @@ const struct wpa_driver_ops wpa_driver_m + .sta_clear_stats = madwifi_sta_clear_stats, + .commit = madwifi_commit, + .set_ap_wps_ie = madwifi_set_ap_wps_ie, +-#else /* HOSTAPD */ ++#endif /* HOSTAPD */ ++#if !defined(NO_SUPPLICANT) + .get_bssid = wpa_driver_madwifi_get_bssid, + .get_ssid = wpa_driver_madwifi_get_ssid, + .init = wpa_driver_madwifi_init, +@@ -1848,5 +1624,5 @@ const struct wpa_driver_ops wpa_driver_m + .disassociate = wpa_driver_madwifi_disassociate, + .associate = wpa_driver_madwifi_associate, + .set_operstate = wpa_driver_madwifi_set_operstate, +-#endif /* HOSTAPD */ ++#endif + }; diff --git a/package/wpa_supplicant/Config.in b/package/wpa_supplicant/Config.in deleted file mode 100644 index 10b8a43a87..0000000000 --- a/package/wpa_supplicant/Config.in +++ /dev/null @@ -1,21 +0,0 @@ -# wpa_supplicant config -config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK - bool "Disable timestamp check" - depends PACKAGE_wpa-supplicant - default n - help - This disables the timestamp check for certificates in wpa_supplicant - Useful for devices without RTC that cannot reliably get the real date/time -choice - prompt "Choose TLS provider" - default WPA_SUPPLICANT_INTERNAL - depends PACKAGE_wpa-supplicant - -config WPA_SUPPLICANT_INTERNAL - bool "internal" - -config WPA_SUPPLICANT_OPENSSL - bool "openssl" - select PACKAGE_libopenssl - -endchoice diff --git a/package/wpa_supplicant/Makefile b/package/wpa_supplicant/Makefile deleted file mode 100644 index 39c66e72b9..0000000000 --- a/package/wpa_supplicant/Makefile +++ /dev/null @@ -1,94 +0,0 @@ -# -# Copyright (C) 2008-2009 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk - -PKG_NAME:=wpa_supplicant -PKG_VERSION:=0.6.9 -PKG_RELEASE:=2 -PKG_MD5SUM:=0efb8fcedf0a8acf6f423dfdb0658fdd - -PKG_SOURCE_URL:=http://hostap.epitest.fi/releases -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz - -PKG_BUILD_DEPENDS:= \ - PACKAGE_kmod-madwifi:madwifi \ - -PKG_CONFIG_DEPENDS:= \ - CONFIG_PACKAGE_kmod-madwifi \ - CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \ - -include $(INCLUDE_DIR)/package.mk - -define Package/wpa-supplicant - SECTION:=net - CATEGORY:=Network - TITLE:=WPA Supplicant - DEPENDS:=$(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),+libopenssl) - URL:=http://hostap.epitest.fi/wpa_supplicant/ -endef - -define Package/wpa-supplicant/Description - WPA Supplicant -endef - -define Package/wpa-supplicant/config - source "$(SOURCE)/Config.in" -endef - -define Package/wpa-cli - SECTION:=net - CATEGORY:=Network - DEPENDS:=wpa-supplicant - TITLE:=WPA Supplicant command line interface -endef - -define Package/wpa-cli/Description - WPA Supplicant control utility -endef - -CONFIG=$(firstword $(wildcard ./files/config.$(BOARD) ./files/config.$(ARCH) ./config)) -TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/madwifi $(if $(CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK),-DNO_TIMESTAMP_CHECK) - -define Build/Configure - cp $(CONFIG) $(PKG_BUILD_DIR)/wpa_supplicant/.config - [ -f $(STAMP_CONFIGURED) ] || $(MAKE) -C $(PKG_BUILD_DIR)/wpa_supplicant clean - rm -f $(PKG_BUILD_DIR)/.configured* - $(if $(CONFIG_PACKAGE_kmod-madwifi),,$(SED) 's,^CONFIG_DRIVER_MADWIFI,#CONFIG_DRIVER_MADWIFI,g' $(PKG_BUILD_DIR)/wpa_supplicant/.config) - $(if $(CONFIG_PACKAGE_kmod-hostap),,$(SED) 's,^CONFIG_DRIVER_HOSTAP,#CONFIG_DRIVER_HOSTAP,g' $(PKG_BUILD_DIR)/wpa_supplicant/.config) - $(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),$(SED) 's|^CONFIG_TLS.*|CONFIG_TLS=openssl|g' $(PKG_BUILD_DIR)/wpa_supplicant/.config) -endef - -define Build/Compile - rm -rf $(PKG_INSTALL_DIR) - mkdir -p $(PKG_INSTALL_DIR) - CFLAGS="$(TARGET_CFLAGS)" \ - $(MAKE) -C $(PKG_BUILD_DIR)/wpa_supplicant \ - CC="$(TARGET_CC)" \ - KERNEL=$(LINUX_DIR) \ - CPPFLAGS="$(TARGET_CPPFLAGS)" \ - LDFLAGS="$(TARGET_LDFLAGS)" \ - all -endef - -define Package/wpa-supplicant/install - $(INSTALL_DIR) $(1)/usr/sbin - $(CP) \ - $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant \ - $(PKG_BUILD_DIR)/wpa_supplicant/wpa_passphrase \ - $(1)/usr/sbin/ - $(INSTALL_DIR) $(1)/lib/wifi - $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh -endef - -define Package/wpa-cli/install - $(INSTALL_DIR) $(1)/usr/sbin - $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/ -endef - -$(eval $(call BuildPackage,wpa-supplicant)) -$(eval $(call BuildPackage,wpa-cli)) diff --git a/package/wpa_supplicant/config b/package/wpa_supplicant/config deleted file mode 100644 index 3ca1cfa655..0000000000 --- a/package/wpa_supplicant/config +++ /dev/null @@ -1,382 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for Prism54 driver -# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is -# for developers only) -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for ndiswrapper -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -#CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -#CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -#CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -#CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Remove AES extra functions. This can be used to reduce code size by about -# 1.5 kB by removing extra AES modes that are not needed for commonly used -# client configurations (they are needed for some EAP types). -#CONFIG_NO_AES_EXTRAS=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=internal - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for DBus control interface -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# Include client MLME (management frame processing). -# This can be used to move MLME processing of Linux mac80211 stack into user -# space. Please note that this is currently only available with -# driver_nl80211.c and only with a modified version of Linux kernel and -# wpa_supplicant. -#CONFIG_CLIENT_MLME=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y diff --git a/package/wpa_supplicant/files/config.brcm-2.4 b/package/wpa_supplicant/files/config.brcm-2.4 deleted file mode 100644 index 0e58fa08c7..0000000000 --- a/package/wpa_supplicant/files/config.brcm-2.4 +++ /dev/null @@ -1,382 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for Prism54 driver -# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is -# for developers only) -#CONFIG_DRIVER_PRISM54=y - -# Driver interface for ndiswrapper -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -#CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -#CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -CONFIG_DRIVER_ROBOSWITCH=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -#CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -#CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Remove AES extra functions. This can be used to reduce code size by about -# 1.5 kB by removing extra AES modes that are not needed for commonly used -# client configurations (they are needed for some EAP types). -#CONFIG_NO_AES_EXTRAS=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=internal - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for DBus control interface -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# Include client MLME (management frame processing). -# This can be used to move MLME processing of Linux mac80211 stack into user -# space. Please note that this is currently only available with -# driver_nl80211.c and only with a modified version of Linux kernel and -# wpa_supplicant. -#CONFIG_CLIENT_MLME=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y diff --git a/package/wpa_supplicant/files/config.brcm47xx b/package/wpa_supplicant/files/config.brcm47xx deleted file mode 120000 index c3fbf345ca..0000000000 --- a/package/wpa_supplicant/files/config.brcm47xx +++ /dev/null @@ -1 +0,0 @@ -config.brcm-2.4 \ No newline at end of file diff --git a/package/wpa_supplicant/files/config.brcm63xx b/package/wpa_supplicant/files/config.brcm63xx deleted file mode 120000 index c3fbf345ca..0000000000 --- a/package/wpa_supplicant/files/config.brcm63xx +++ /dev/null @@ -1 +0,0 @@ -config.brcm-2.4 \ No newline at end of file diff --git a/package/wpa_supplicant/files/wpa_supplicant.sh b/package/wpa_supplicant/files/wpa_supplicant.sh deleted file mode 100644 index ea10b386e1..0000000000 --- a/package/wpa_supplicant/files/wpa_supplicant.sh +++ /dev/null @@ -1,116 +0,0 @@ -wpa_supplicant_setup_vif() { - local vif="$1" - local driver="$2" - local key="$key" - - # wpa_supplicant should use wext for mac80211 cards - [ "$driver" = "mac80211" ] && driver='wext' - - # make sure we have the psk - [ -n "$key" ] || { - config_get key "$vif" key - } - - case "$enc" in - *wep*) - key_mgmt='NONE' - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) - for idx in 1 2 3 4; do - local zidx - zidx=$(($idx - 1)) - config_get ckey "$vif" "key${idx}" - [ -n "$ckey" ] && \ - append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")" - done - wep_tx_keyidx="wep_tx_keyidx=$((key - 1))" - ;; - *) - wep_key0="wep_key0=$(prepare_key_wep "$key")" - wep_tx_keyidx="wep_tx_keyidx=0" - ;; - esac - ;; - *psk*) - key_mgmt='WPA-PSK' - config_get_bool usepassphrase "$vif" passphrase 1 - case "$enc" in - *psk2*) - proto='proto=RSN' - if [ "$usepassphrase" = "1" ]; then - passphrase="psk=\"${key}\"" - else - passphrase="psk=${key}" - fi - ;; - *psk*) - proto='proto=WPA' - if [ "$usepassphrase" = "1" ]; then - passphrase="psk=\"${key}\"" - else - passphrase="psk=${key}" - fi - ;; - esac - ;; - *wpa*|*8021x*) - proto='proto=WPA2' - key_mgmt='WPA-EAP' - config_get ca_cert "$vif" ca_cert - ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""} - case "$eap_type" in - tls) - pairwise='pairwise=CCMP' - group='group=CCMP' - config_get priv_key "$vif" priv_key - config_get priv_key_pwd "$vif" priv_key_pwd - priv_key="private_key=\"$priv_key\"" - priv_key_pwd="private_key_passwd=\"$priv_key_pwd\"" - ;; - peap|ttls) - config_get auth "$vif" auth - config_get identity "$vif" identity - config_get password "$vif" password - phase2="phase2=\"auth=${auth:-MSCHAPV2}\"" - identity="identity=\"$identity\"" - password="password=\"$password\"" - ;; - esac - eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')" - ;; - esac - config_get ifname "$vif" ifname - config_get bridge "$vif" bridge - config_get ssid "$vif" ssid - config_get bssid "$vif" bssid - bssid=${bssid:+"bssid=$bssid"} - cat > /var/run/wpa_supplicant-$ifname.conf <not_before || -+#endif - (unsigned long) now.sec > - (unsigned long) cert->not_after) { - wpa_printf(MSG_INFO, "X509: Certificate not valid " diff --git a/package/wpa_supplicant/patches/110-roaming.patch b/package/wpa_supplicant/patches/110-roaming.patch deleted file mode 100644 index 077c2e56b3..0000000000 --- a/package/wpa_supplicant/patches/110-roaming.patch +++ /dev/null @@ -1,46 +0,0 @@ -This patch decreases the timeouts for assoc/auth to more realistic values. Improves roaming speed ---- a/wpa_supplicant/events.c -+++ b/wpa_supplicant/events.c -@@ -854,7 +854,7 @@ static void wpa_supplicant_event_assoc(s - wpa_supplicant_set_state(wpa_s, WPA_COMPLETED); - } else if (!ft_completed) { - /* Timeout for receiving the first EAPOL packet */ -- wpa_supplicant_req_auth_timeout(wpa_s, 10, 0); -+ wpa_supplicant_req_auth_timeout(wpa_s, 3, 0); - } - wpa_supplicant_cancel_scan(wpa_s); - ---- a/wpa_supplicant/scan.c -+++ b/wpa_supplicant/scan.c -@@ -189,6 +189,7 @@ static void wpa_supplicant_scan(void *el - } - #endif /* CONFIG_WPS */ - -+ wpa_drv_flush_pmkid(wpa_s); - if (wpa_s->use_client_mlme) { - ieee80211_sta_set_probe_req_ie(wpa_s, extra_ie, extra_ie_len); - ret = ieee80211_sta_req_scan(wpa_s, ssid ? ssid->ssid : NULL, -@@ -203,7 +204,7 @@ static void wpa_supplicant_scan(void *el - - if (ret) { - wpa_printf(MSG_WARNING, "Failed to initiate AP scan."); -- wpa_supplicant_req_scan(wpa_s, 10, 0); -+ wpa_supplicant_req_scan(wpa_s, 3, 0); - } else - wpa_s->scan_runs++; - } ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -1160,10 +1160,10 @@ void wpa_supplicant_associate(struct wpa - - if (assoc_failed) { - /* give IBSS a bit more time */ -- timeout = ssid->mode ? 10 : 5; -+ timeout = ssid->mode ? 5 : 2; - } else if (wpa_s->conf->ap_scan == 1) { - /* give IBSS a bit more time */ -- timeout = ssid->mode ? 20 : 10; -+ timeout = ssid->mode ? 7 : 3; - } - wpa_supplicant_req_auth_timeout(wpa_s, timeout, 0); - } diff --git a/package/wpa_supplicant/patches/120-ssid_scan.patch b/package/wpa_supplicant/patches/120-ssid_scan.patch deleted file mode 100644 index 6beaed449c..0000000000 --- a/package/wpa_supplicant/patches/120-ssid_scan.patch +++ /dev/null @@ -1,41 +0,0 @@ -Don't do broadcast SSID scans, if all configured SSIDs use scan_ssid=1. Improves background scanning in supplicant-managed roaming. - ---- a/wpa_supplicant/scan.c -+++ b/wpa_supplicant/scan.c -@@ -73,6 +73,7 @@ static void wpa_supplicant_scan(void *el - struct wpabuf *wps_ie = NULL; - const u8 *extra_ie = NULL; - size_t extra_ie_len = 0; -+ int scan_ssid_all = 1; - int wps = 0; - #ifdef CONFIG_WPS - enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO; -@@ -82,6 +83,17 @@ static void wpa_supplicant_scan(void *el - return; - - enabled = 0; -+ -+ /* check if all configured ssids should be scanned directly */ -+ ssid = wpa_s->conf->ssid; -+ while (ssid) { -+ if (!ssid->scan_ssid) { -+ scan_ssid_all = 0; -+ break; -+ } -+ ssid = ssid->next; -+ } -+ - ssid = wpa_s->conf->ssid; - while (ssid) { - if (!ssid->disabled) { -@@ -154,6 +166,10 @@ static void wpa_supplicant_scan(void *el - return; - } - -+ if (scan_ssid_all && !ssid) { -+ ssid = wpa_s->conf->ssid; -+ } -+ - wpa_printf(MSG_DEBUG, "Starting AP scan (%s SSID)", - ssid ? "specific": "broadcast"); - if (ssid) { diff --git a/package/wpa_supplicant/patches/130-scanning.patch b/package/wpa_supplicant/patches/130-scanning.patch deleted file mode 100644 index aad4450f7d..0000000000 --- a/package/wpa_supplicant/patches/130-scanning.patch +++ /dev/null @@ -1,175 +0,0 @@ -Add a scan result cache to improve roaming speed if the driver gave us a background scan before losing the connection. - ---- a/wpa_supplicant/config.h -+++ b/wpa_supplicant/config.h -@@ -97,6 +97,12 @@ struct wpa_config { - int ap_scan; - - /** -+ * scan_cache - controls the time in seconds after the last scan results -+ * before a new scan may be initiated -+ */ -+ int scan_cache; -+ -+ /** - * ctrl_interface - Parameters for the control interface - * - * If this is specified, %wpa_supplicant will open a control interface ---- a/wpa_supplicant/config_file.c -+++ b/wpa_supplicant/config_file.c -@@ -306,6 +306,13 @@ static int wpa_config_parse_int(const st - return 0; - } - -+static int wpa_config_process_scan_cache(struct wpa_config *config, char *pos) -+{ -+ config->scan_cache = atoi(pos); -+ wpa_printf(MSG_DEBUG, "scan_cache=%d", config->scan_cache); -+ return 0; -+} -+ - - static int wpa_config_parse_str(const struct global_parse_data *data, - struct wpa_config *config, int line, -@@ -433,6 +440,7 @@ static const struct global_parse_data gl - #endif /* CONFIG_CTRL_IFACE */ - { INT_RANGE(eapol_version, 1, 2) }, - { INT(ap_scan) }, -+ { INT(scan_cache) }, - { INT(fast_reauth) }, - #ifdef EAP_TLS_OPENSSL - { STR(opensc_engine_path) }, -@@ -835,6 +843,8 @@ static void wpa_config_write_global(FILE - fprintf(f, "eapol_version=%d\n", config->eapol_version); - if (config->ap_scan != DEFAULT_AP_SCAN) - fprintf(f, "ap_scan=%d\n", config->ap_scan); -+ if (config->scan_cache != 0) -+ fprintf(f, "scan_cache=%d\n", config->scan_cache); - if (config->fast_reauth != DEFAULT_FAST_REAUTH) - fprintf(f, "fast_reauth=%d\n", config->fast_reauth); - #ifdef EAP_TLS_OPENSSL ---- a/wpa_supplicant/events.c -+++ b/wpa_supplicant/events.c -@@ -541,7 +541,7 @@ wpa_supplicant_select_bss_non_wpa(struct - "BSSID mismatch"); - continue; - } -- -+ - if (!(ssid->key_mgmt & WPA_KEY_MGMT_NONE) && - !(ssid->key_mgmt & WPA_KEY_MGMT_WPS) && - !(ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA)) -@@ -551,7 +551,7 @@ wpa_supplicant_select_bss_non_wpa(struct - continue; - } - -- if ((ssid->key_mgmt & -+ if ((ssid->key_mgmt & - (WPA_KEY_MGMT_IEEE8021X | WPA_KEY_MGMT_PSK | - WPA_KEY_MGMT_FT_IEEE8021X | WPA_KEY_MGMT_FT_PSK | - WPA_KEY_MGMT_IEEE8021X_SHA256 | -@@ -640,6 +640,9 @@ static void wpa_supplicant_event_scan_re - wpa_s->disconnected) - return; - -+ if (wpa_s->wpa_state > WPA_ASSOCIATED) -+ goto done; -+ - while (selected == NULL) { - for (prio = 0; prio < wpa_s->conf->num_prio; prio++) { - selected = wpa_supplicant_select_bss( -@@ -652,6 +655,7 @@ static void wpa_supplicant_event_scan_re - wpa_printf(MSG_DEBUG, "No APs found - clear blacklist " - "and try again"); - wpa_blacklist_clear(wpa_s); -+ memset(&wpa_s->last_scan_results, 0, sizeof(wpa_s->last_scan_results)); - wpa_s->blacklist_cleared++; - } else if (selected == NULL) { - break; -@@ -687,10 +691,12 @@ static void wpa_supplicant_event_scan_re - rsn_preauth_scan_results(wpa_s->wpa, wpa_s->scan_res); - } else { - wpa_printf(MSG_DEBUG, "No suitable AP found."); -- timeout = 5; -+ timeout = 0; - goto req_scan; - } - -+done: -+ os_get_time(&wpa_s->last_scan_results); - return; - - req_scan: -@@ -894,6 +900,9 @@ static void wpa_supplicant_event_disasso - } - if (wpa_s->wpa_state >= WPA_ASSOCIATED) - wpa_supplicant_req_scan(wpa_s, 0, 100000); -+ else if (wpa_s->wpa_state == WPA_ASSOCIATING) -+ wpa_supplicant_req_auth_timeout(wpa_s, 0, 100000); -+ - bssid = wpa_s->bssid; - if (is_zero_ether_addr(bssid)) - bssid = wpa_s->pending_bssid; ---- a/wpa_supplicant/wpa_supplicant_i.h -+++ b/wpa_supplicant/wpa_supplicant_i.h -@@ -350,6 +350,7 @@ struct wpa_supplicant { - struct wpa_client_mlme mlme; - int use_client_mlme; - int driver_4way_handshake; -+ struct os_time last_scan_results; - - int pending_mic_error_report; - int pending_mic_error_pairwise; -@@ -405,6 +406,7 @@ int wpa_supplicant_scard_init(struct wpa - - /* scan.c */ - void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec); -+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s); - void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s); - - /* events.c */ ---- a/wpa_supplicant/scan.c -+++ b/wpa_supplicant/scan.c -@@ -40,6 +40,18 @@ static void wpa_supplicant_gen_assoc_eve - wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data); - } - -+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s) -+{ -+ struct os_time time; -+ -+ if (wpa_s->conf->scan_cache > 0) { -+ os_get_time(&time); -+ time.sec -= wpa_s->conf->scan_cache; -+ if (os_time_before(&time, &wpa_s->last_scan_results)) -+ return 0; -+ } -+ return 1; -+} - - #ifdef CONFIG_WPS - static int wpas_wps_in_use(struct wpa_config *conf, -@@ -183,8 +195,9 @@ static void wpa_supplicant_scan(void *el - wps = wpas_wps_in_use(wpa_s->conf, &req_type); - #endif /* CONFIG_WPS */ - -- if (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 && -- !wpa_s->use_client_mlme && wps != 2) { -+ if (!wpa_supplicant_may_scan(wpa_s) || -+ (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 && -+ !wpa_s->use_client_mlme && wps != 2)) { - wpa_s->scan_res_tried++; - wpa_s->scan_req = scan_req; - wpa_printf(MSG_DEBUG, "Trying to get current scan results " ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -1491,6 +1491,9 @@ void wpa_supplicant_rx_eapol(void *ctx, - { - struct wpa_supplicant *wpa_s = ctx; - -+ if (wpa_s->wpa_state < WPA_ASSOCIATING) -+ return; -+ - wpa_printf(MSG_DEBUG, "RX EAPOL from " MACSTR, MAC2STR(src_addr)); - wpa_hexdump(MSG_MSGDUMP, "RX EAPOL", buf, len); - diff --git a/package/wpa_supplicant/patches/140-quality.patch b/package/wpa_supplicant/patches/140-quality.patch deleted file mode 100644 index edb0b2693b..0000000000 --- a/package/wpa_supplicant/patches/140-quality.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/wpa_supplicant/wpa_supplicant.c -+++ b/wpa_supplicant/wpa_supplicant.c -@@ -1248,7 +1248,7 @@ static int wpa_supplicant_get_scan_resul - { - #define SCAN_AP_LIMIT 128 - struct wpa_scan_result *results; -- int num, i; -+ int num, i, j; - struct wpa_scan_results *res; - - results = os_malloc(SCAN_AP_LIMIT * sizeof(struct wpa_scan_result)); -@@ -1345,6 +1345,21 @@ static int wpa_supplicant_get_scan_resul - res->res[res->num++] = r; - } - -+ /* sort scan results by quality */ -+ for(i = 0; i < num - 1; i++) { -+ for(j = i + 1; j < num; j++) { -+ struct wpa_scan_result tmp; -+ -+ if (results[i].qual > results[j].qual) -+ continue; -+ -+ os_memcpy(&tmp, &results[i], sizeof(tmp)); -+ os_memcpy(&results[i], &results[j], sizeof(tmp)); -+ os_memcpy(&results[j], &tmp, sizeof(tmp)); -+ } -+ } -+ -+ - os_free(results); - wpa_s->scan_res = res; - diff --git a/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch b/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch deleted file mode 100644 index 94559f1b32..0000000000 --- a/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch +++ /dev/null @@ -1,251 +0,0 @@ -From 67441c596f016f69c230eaa31ecb2272c6cbf4bf Mon Sep 17 00:00:00 2001 -From: Hamish Guthrie -Date: Wed, 6 Jan 2010 10:00:22 +0100 -Subject: [PATCH] Remove PS3 gelic legacy wpa support - -The ps3 wireless driver now supports wireless extensions. There is dedicated support code in wpa_supplicant for the old gelic wireless driver. The current gelic driver retains the old API with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE, which is being removed from the driver. - -Signed-off-by: Hamish Guthrie ---- - src/drivers/driver_ps3.c | 186 ---------------------------------------------- - src/drivers/drivers.c | 6 -- - wpa_supplicant/Makefile | 6 -- - 3 files changed, 0 insertions(+), 198 deletions(-) - delete mode 100644 src/drivers/driver_ps3.c - -diff --git a/src/drivers/driver_ps3.c b/src/drivers/driver_ps3.c -deleted file mode 100644 -index fde3425..0000000 ---- a/src/drivers/driver_ps3.c -+++ /dev/null -@@ -1,186 +0,0 @@ --/* -- * WPA Supplicant - PS3 Linux wireless extension driver interface -- * Copyright 2007, 2008 Sony Corporation -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- * -- * Alternatively, this software may be distributed under the terms of BSD -- * license. -- * -- * See README and COPYING for more details. -- */ -- --#include "includes.h" --#include --#include "wireless_copy.h" --#include "common.h" --#include "wpa_common.h" --#include "driver.h" --#include "eloop.h" --#include "driver_wext.h" --#include "ieee802_11_defs.h" -- --static int wpa_driver_ps3_set_wpa_key(struct wpa_driver_wext_data *drv, -- struct wpa_driver_associate_params *params) --{ -- int ret, i; -- struct iwreq iwr; -- char *buf, *str; -- -- if (!params->psk && !params->passphrase) { -- wpa_printf(MSG_INFO, "%s:no PSK error", __func__); -- return -EINVAL; -- } -- -- os_memset(&iwr, 0, sizeof(iwr)); -- if (params->psk) { -- /* includes null */ -- iwr.u.data.length = PMK_LEN * 2 + 1; -- buf = os_malloc(iwr.u.data.length); -- if (!buf) -- return -ENOMEM; -- str = buf; -- for (i = 0; i < PMK_LEN; i++) { -- str += snprintf(str, iwr.u.data.length - (str - buf), -- "%02x", params->psk[i]); -- } -- } else if (params->passphrase) { -- /* including quotations and null */ -- iwr.u.data.length = strlen(params->passphrase) + 3; -- buf = os_malloc(iwr.u.data.length); -- if (!buf) -- return -ENOMEM; -- buf[0] = '"'; -- os_memcpy(buf + 1, params->passphrase, iwr.u.data.length - 3); -- buf[iwr.u.data.length - 2] = '"'; -- buf[iwr.u.data.length - 1] = '\0'; -- } else -- return -EINVAL; -- iwr.u.data.pointer = (caddr_t) buf; -- os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); -- ret = ioctl(drv->ioctl_sock, SIOCIWFIRSTPRIV, &iwr); -- os_free(buf); -- -- return ret; --} -- --static int wpa_driver_ps3_set_wep_keys(struct wpa_driver_wext_data *drv, -- struct wpa_driver_associate_params *params) --{ -- int ret, i; -- struct iwreq iwr; -- -- for (i = 0; i < 4; i++) { -- os_memset(&iwr, 0, sizeof(iwr)); -- os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ); -- iwr.u.encoding.flags = i + 1; -- if (params->wep_key_len[i]) { -- iwr.u.encoding.pointer = (caddr_t) params->wep_key[i]; -- iwr.u.encoding.length = params->wep_key_len[i]; -- } else -- iwr.u.encoding.flags = IW_ENCODE_NOKEY | -- IW_ENCODE_DISABLED; -- -- if (ioctl(drv->ioctl_sock, SIOCSIWENCODE, &iwr) < 0) { -- perror("ioctl[SIOCSIWENCODE]"); -- ret = -1; -- } -- } -- return ret; --} -- --static int wpa_driver_ps3_associate(void *priv, -- struct wpa_driver_associate_params *params) --{ -- struct wpa_driver_wext_data *drv = priv; -- int ret, value; -- -- wpa_printf(MSG_DEBUG, "%s: <-", __func__); -- -- /* clear BSSID */ -- if (!params->bssid && -- wpa_driver_wext_set_bssid(drv, NULL) < 0) -- ret = -1; -- -- if (wpa_driver_wext_set_mode(drv, params->mode) < 0) -- ret = -1; -- -- if (params->wpa_ie == NULL || params->wpa_ie_len == 0) -- value = IW_AUTH_WPA_VERSION_DISABLED; -- else if (params->wpa_ie[0] == WLAN_EID_RSN) -- value = IW_AUTH_WPA_VERSION_WPA2; -- else -- value = IW_AUTH_WPA_VERSION_WPA; -- if (wpa_driver_wext_set_auth_param(drv, -- IW_AUTH_WPA_VERSION, value) < 0) -- ret = -1; -- value = wpa_driver_wext_cipher2wext(params->pairwise_suite); -- if (wpa_driver_wext_set_auth_param(drv, -- IW_AUTH_CIPHER_PAIRWISE, value) < 0) -- ret = -1; -- value = wpa_driver_wext_cipher2wext(params->group_suite); -- if (wpa_driver_wext_set_auth_param(drv, -- IW_AUTH_CIPHER_GROUP, value) < 0) -- ret = -1; -- value = wpa_driver_wext_keymgmt2wext(params->key_mgmt_suite); -- if (wpa_driver_wext_set_auth_param(drv, IW_AUTH_KEY_MGMT, value) < 0) -- ret = -1; -- -- /* set selected BSSID */ -- if (params->bssid && -- wpa_driver_wext_set_bssid(drv, params->bssid) < 0) -- ret = -1; -- -- switch (params->group_suite) { -- case CIPHER_NONE: -- ret = 0; -- break; -- case CIPHER_WEP40: -- case CIPHER_WEP104: -- ret = wpa_driver_ps3_set_wep_keys(drv, params); -- break; -- case CIPHER_TKIP: -- case CIPHER_CCMP: -- ret = wpa_driver_ps3_set_wpa_key(drv, params); -- break; -- } -- -- /* start to associate */ -- ret = wpa_driver_wext_set_ssid(drv, params->ssid, params->ssid_len); -- -- wpa_printf(MSG_DEBUG, "%s: ->", __func__); -- -- return ret; --} -- --static int wpa_driver_ps3_get_capa(void *priv, struct wpa_driver_capa *capa) --{ -- int ret; -- wpa_printf(MSG_DEBUG, "%s:<-", __func__); -- -- ret = wpa_driver_wext_get_capa(priv, capa); -- if (ret) { -- wpa_printf(MSG_INFO, "%s: base wext returns error %d", -- __func__, ret); -- return ret; -- } -- /* PS3 hypervisor does association and 4way handshake by itself */ -- capa->flags |= WPA_DRIVER_FLAGS_4WAY_HANDSHAKE; -- wpa_printf(MSG_DEBUG, "%s:->", __func__); -- return 0; --} -- --const struct wpa_driver_ops wpa_driver_ps3_ops = { -- .name = "ps3", -- .desc = "PLAYSTATION3 Linux wireless extension driver", -- .get_bssid = wpa_driver_wext_get_bssid, -- .get_ssid = wpa_driver_wext_get_ssid, -- .scan = wpa_driver_wext_scan, -- .get_scan_results2 = wpa_driver_wext_get_scan_results, -- .associate = wpa_driver_ps3_associate, /* PS3 */ -- .init = wpa_driver_wext_init, -- .deinit = wpa_driver_wext_deinit, -- .get_capa = wpa_driver_ps3_get_capa, /* PS3 */ --}; -diff --git a/src/drivers/drivers.c b/src/drivers/drivers.c -index d278797..7e7d720 100644 ---- a/src/drivers/drivers.c -+++ b/src/drivers/drivers.c -@@ -64,9 +64,6 @@ extern struct wpa_driver_ops wpa_driver_ralink_ops; /* driver_ralink.c */ - #ifdef CONFIG_DRIVER_OSX - extern struct wpa_driver_ops wpa_driver_osx_ops; /* driver_osx.m */ - #endif /* CONFIG_DRIVER_OSX */ --#ifdef CONFIG_DRIVER_PS3 --extern struct wpa_driver_ops wpa_driver_ps3_ops; /* driver_ps3.c */ --#endif /* CONFIG_DRIVER_PS3 */ - #ifdef CONFIG_DRIVER_IPHONE - extern struct wpa_driver_ops wpa_driver_iphone_ops; /* driver_iphone.m */ - #endif /* CONFIG_DRIVER_IPHONE */ -@@ -126,9 +123,6 @@ struct wpa_driver_ops *wpa_supplicant_drivers[] = - #ifdef CONFIG_DRIVER_OSX - &wpa_driver_osx_ops, - #endif /* CONFIG_DRIVER_OSX */ --#ifdef CONFIG_DRIVER_PS3 -- &wpa_driver_ps3_ops, --#endif /* CONFIG_DRIVER_PS3 */ - #ifdef CONFIG_DRIVER_IPHONE - &wpa_driver_iphone_ops, - #endif /* CONFIG_DRIVER_IPHONE */ -diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile -index 45d6ada..f131e92 100644 ---- a/wpa_supplicant/Makefile -+++ b/wpa_supplicant/Makefile -@@ -226,12 +226,6 @@ LDFLAGS += -framework CoreFoundation - LDFLAGS += -F/System/Library/PrivateFrameworks -framework Apple80211 - endif - --ifdef CONFIG_DRIVER_PS3 --CFLAGS += -DCONFIG_DRIVER_PS3 -m64 --OBJS_d += ../src/drivers/driver_ps3.o --LDFLAGS += -m64 --endif -- - ifdef CONFIG_DRIVER_IPHONE - CFLAGS += -DCONFIG_DRIVER_IPHONE - OBJS_d += ../src/drivers/driver_iphone.o --- -1.6.2.4 -