From: Pavel Machek Date: Tue, 18 Aug 2015 12:34:26 +0000 (+0200) Subject: tftp: adjust settings to be suitable for 100Mbit ethernet X-Git-Tag: v2015.10-rc3~97^2~8 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=620776d;p=oweals%2Fu-boot.git tftp: adjust settings to be suitable for 100Mbit ethernet Adjust timouts and retry counts to be suitable for loaded ethernet network. With 5 seconds timeout, 10 retries maximum, tftp is impossible even on local network with single full-speed TCP connection. 100msec timeout should be suitable for most networks tftp is used on, that is local ethernets. Timeout count really needs to be way higher, as lost packets are normal when TCP is running over the same network. Enforce 10msec minimum. Signed-off-by: Pavel Machek Acked-by: Joe Hershberger --- diff --git a/net/tftp.c b/net/tftp.c index 89be32a26b..18ce84c202 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -19,10 +19,10 @@ /* Well known TFTP port # */ #define WELL_KNOWN_PORT 69 /* Millisecs to timeout for lost pkt */ -#define TIMEOUT 5000UL +#define TIMEOUT 100UL #ifndef CONFIG_NET_RETRY_COUNT /* # of timeouts before giving up */ -# define TIMEOUT_COUNT 10 +# define TIMEOUT_COUNT 1000 #else # define TIMEOUT_COUNT (CONFIG_NET_RETRY_COUNT * 2) #endif @@ -711,10 +711,10 @@ void tftp_start(enum proto_t protocol) if (ep != NULL) timeout_ms = simple_strtol(ep, NULL, 10); - if (timeout_ms < 1000) { - printf("TFTP timeout (%ld ms) too low, set min = 1000 ms\n", + if (timeout_ms < 10) { + printf("TFTP timeout (%ld ms) too low, set min = 10 ms\n", timeout_ms); - timeout_ms = 1000; + timeout_ms = 10; } debug("TFTP blocksize = %i, timeout = %ld ms\n",