From: Alexander Graf Date: Mon, 15 Aug 2016 15:48:51 +0000 (+0200) Subject: serial: bcm283x_mu: Detect disabled serial device X-Git-Tag: v2016.09~47 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=601147b06a708900c5352dc3dcc5d64271bf0d62;p=oweals%2Fu-boot.git serial: bcm283x_mu: Detect disabled serial device On the raspberry pi, you can disable the serial port to gain dynamic frequency scaling which can get handy at times. However, in such a configuration the serial controller gets its rx queue filled up with zero bytes which then happily get transmitted on to whoever calls getc() today. This patch adds detection logic for that case by checking whether the RX pin is mapped to GPIO15 and disables the mini uart if it is not mapped properly. That way we can leave the driver enabled in the tree and can determine during runtime whether serial is usable or not, having a single binary that allows for uart and non-uart operation. Signed-off-by: Alexander Graf Acked-by: Stephen Warren Reviewed-by: Simon Glass --- diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index fbfbf6cbbc..6245b3678f 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -50,7 +50,7 @@ U_BOOT_DEVICE(bcm2835_serials) = { .platdata = &serial_platdata, }; #else -static const struct bcm283x_mu_serial_platdata serial_platdata = { +static struct bcm283x_mu_serial_platdata serial_platdata = { .base = 0x3f215040, .clock = 250000000, .skip_init = true, @@ -452,6 +452,38 @@ int board_init(void) return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); } +#ifndef CONFIG_PL01X_SERIAL +static bool rpi_is_serial_active(void) +{ + int serial_gpio = 15; + struct udevice *dev; + + /* + * The RPi3 disables the mini uart by default. The easiest way to find + * out whether it is available is to check if the RX pin is muxed. + */ + + if (uclass_first_device(UCLASS_GPIO, &dev) || !dev) + return true; + + if (bcm2835_gpio_get_func_id(dev, serial_gpio) != BCM2835_GPIO_ALT5) + return false; + + return true; +} +#endif + +int board_early_init_f(void) +{ +#ifndef CONFIG_PL01X_SERIAL + /* Disable mini-UART I/O if it's not pinmuxed to our pins */ + if (!rpi_is_serial_active()) + serial_platdata.disabled = true; +#endif + + return 0; +} + int board_mmc_init(bd_t *bis) { ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1); diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index 922e01bfcb..c59474cdf0 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -20,3 +20,5 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_PHYS_TO_BUS=y CONFIG_OF_LIBFDT=y +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index bff92df9d9..67c4a0cbe6 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -19,3 +19,5 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_PHYS_TO_BUS=y CONFIG_OF_LIBFDT=y +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c index 8b88d7956e..8dd7a28e26 100644 --- a/drivers/gpio/bcm2835_gpio.c +++ b/drivers/gpio/bcm2835_gpio.c @@ -123,5 +123,6 @@ U_BOOT_DRIVER(gpio_bcm2835) = { .id = UCLASS_GPIO, .ops = &gpio_bcm2835_ops, .probe = bcm2835_gpio_probe, + .flags = DM_FLAG_PRE_RELOC, .priv_auto_alloc_size = sizeof(struct bcm2835_gpios), }; diff --git a/drivers/serial/serial_bcm283x_mu.c b/drivers/serial/serial_bcm283x_mu.c index 7357bbfb26..f4e062f0c4 100644 --- a/drivers/serial/serial_bcm283x_mu.c +++ b/drivers/serial/serial_bcm283x_mu.c @@ -73,6 +73,9 @@ static int bcm283x_mu_serial_probe(struct udevice *dev) struct bcm283x_mu_serial_platdata *plat = dev_get_platdata(dev); struct bcm283x_mu_priv *priv = dev_get_priv(dev); + if (plat->disabled) + return -ENODEV; + priv->regs = (struct bcm283x_mu_regs *)plat->base; return 0; diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 752cc319fc..e34814bd5e 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -16,6 +16,7 @@ /* Architecture, CPU, etc.*/ #define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOARD_EARLY_INIT_F /* Use SoC timer for AArch32, but architected timer for AArch64 */ #ifndef CONFIG_ARM64 diff --git a/include/dm/platform_data/serial_bcm283x_mu.h b/include/dm/platform_data/serial_bcm283x_mu.h index 57ae6adc05..c47d3c0e60 100644 --- a/include/dm/platform_data/serial_bcm283x_mu.h +++ b/include/dm/platform_data/serial_bcm283x_mu.h @@ -19,6 +19,7 @@ struct bcm283x_mu_serial_platdata { unsigned long base; unsigned int clock; bool skip_init; + bool disabled; }; #endif