From: wdenk Date: Wed, 21 Aug 2002 22:08:56 +0000 (+0000) Subject: Initial revision X-Git-Tag: LABEL_2006_03_12_0025~1099 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=5d3207da3a17b6d37f221379ec15b64812f20b8f;p=oweals%2Fu-boot.git Initial revision --- diff --git a/common/virtex2.c b/common/virtex2.c new file mode 100644 index 0000000000..b519be9708 --- /dev/null +++ b/common/virtex2.c @@ -0,0 +1,543 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Configuration support for Xilinx Virtex2 devices. Based + * on spartan2.c (Rich Ireland, rireland@enterasys.com). + */ + +#include +#include + +#if (CONFIG_FPGA & (CFG_XILINX | CFG_VIRTEX2)) + +#ifdef FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +/* + * If the SelectMap interface can be overrun by the processor, define + * CFG_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration + * file and add board-specific support for checking BUSY status. By default, + * assume that the SelectMap interface cannot be overrun. + */ +#ifndef CFG_FPGA_CHECK_BUSY +#undef CFG_FPGA_CHECK_BUSY +#endif + +#ifndef CONFIG_FPGA_DELAY +#define CONFIG_FPGA_DELAY() +#endif + +#ifndef CFG_FPGA_PROG_FEEDBACK +#define CFG_FPGA_PROG_FEEDBACK +#endif + +/* + * Don't allow config cycle to be interrupted + */ +#ifndef CFG_FPGA_CHECK_CTRLC +#undef CFG_FPGA_CHECK_CTRLC +#endif + +/* + * Check for errors during configuration by default + */ +#ifndef CFG_FPGA_CHECK_ERROR +#define CFG_FPGA_CHECK_ERROR +#endif + +/* + * The default timeout in mS for INIT_B to deassert after PROG_B has + * been deasserted. Per the latest Virtex II Handbook (page 347), the + * max time from PORG_B deassertion to INIT_B deassertion is 4uS per + * data frame for the XC2V8000. The XC2V8000 has 2860 data frames + * which yields 11.44 mS. So let's make it bigger in order to handle + * an XC2V1000, if anyone can ever get ahold of one. + */ +#ifndef CFG_FPGA_WAIT_INIT +#define CFG_FPGA_WAIT_INIT 500 /* time in milliseconds */ +#endif + +/* + * The default timeout for waiting for BUSY to deassert during configuration. + * This is normally not necessary since for most reasonable configuration + * clock frequencies (i.e. 66 MHz or less), BUSY monitoring is unnecessary. + */ +#ifndef CFG_FPGA_WAIT_BUSY +#define CFG_FPGA_WAIT_BUSY 5 /* time in milliseconds */ +#endif + +/* Default timeout for waiting for FPGA to enter operational mode after + * configuration data has been written. + */ +#ifndef CFG_FPGA_WAIT_CONFIG +#define CFG_FPGA_WAIT_CONFIG 200 /* time in milliseconds */ +#endif + +static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize); +static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize); +static int Virtex2_ssm_reloc (Xilinx_desc * desc, ulong reloc_offset); + +static int Virtex2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize); +static int Virtex2_ss_dump (Xilinx_desc * desc, void *buf, size_t bsize); +static int Virtex2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset); + +int Virtex2_load (Xilinx_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + + switch (desc->iface) { + case slave_serial: + PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__); + ret_val = Virtex2_ss_load (desc, buf, bsize); + break; + + case slave_selectmap: + PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__); + ret_val = Virtex2_ssm_load (desc, buf, bsize); + break; + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + return ret_val; +} + +int Virtex2_dump (Xilinx_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + + switch (desc->iface) { + case slave_serial: + PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__); + ret_val = Virtex2_ss_dump (desc, buf, bsize); + break; + + case slave_parallel: + PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__); + ret_val = Virtex2_ssm_dump (desc, buf, bsize); + break; + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + return ret_val; +} + +int Virtex2_info (Xilinx_desc * desc) +{ + return FPGA_SUCCESS; +} + +int Virtex2_reloc (Xilinx_desc * desc, ulong reloc_offset) +{ + int ret_val = FPGA_FAIL; + + if (desc->family != Xilinx_Virtex2) { + printf ("%s: Unsupported family type, %d\n", + __FUNCTION__, desc->family); + return FPGA_FAIL; + } else + switch (desc->iface) { + case slave_serial: + ret_val = Virtex2_ss_reloc (desc, reloc_offset); + break; + + case slave_selectmap: + ret_val = Virtex2_ssm_reloc (desc, reloc_offset); + break; + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + return ret_val; +} + +/* + * Virtex-II Slave SelectMap configuration loader. Configuration via + * SelectMap is as follows: + * 1. Set the FPGA's PROG_B line low. + * 2. Set the FPGA's PROG_B line high. Wait for INIT_B to go high. + * 3. Write data to the SelectMap port. If INIT_B goes low at any time + * this process, a configuration error (most likely CRC failure) has + * ocurred. At this point a status word may be read from the + * SelectMap interface to determine the source of the problem (You + * could, for instance, put this in you 'abort' function handler). + * 4. After all data has been written, test the state of the FPGA + * INIT_B and DONE lines. If both are high, configuration has + * succeeded. Congratulations! + */ +static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns; + + PRINTF ("%s:%d: Start with interface functions @ 0x%p\n", + __FUNCTION__, __LINE__, fn); + + if (fn) { + size_t bytecount = 0; + unsigned char *data = (unsigned char *) buf; + int cookie = desc->cookie; + unsigned long ts; + + /* Gotta split this one up (so the stack won't blow??) */ + PRINTF ("%s:%d: Function Table:\n" + " base 0x%p\n" + " struct 0x%p\n" + " pre 0x%p\n" + " prog 0x%p\n" + " init 0x%p\n" + " error 0x%p\n", + __FUNCTION__, __LINE__, + &fn, fn, fn->pre, fn->pgm, fn->init, fn->err); + PRINTF (" clock 0x%p\n" + " cs 0x%p\n" + " write 0x%p\n" + " rdata 0x%p\n" + " wdata 0x%p\n" + " busy 0x%p\n" + " abort 0x%p\n" + " post 0x%p\n\n", + fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, + fn->busy, fn->abort, fn->post); + +#ifdef CFG_FPGA_PROG_FEEDBACK + printf ("Initializing FPGA Device %d...\n", cookie); +#endif + /* + * Run the pre configuration function if there is one. + */ + if (*fn->pre) { + (*fn->pre) (cookie); + } + + /* + * Assert the program line. The minimum pulse width for + * Virtex II devices is 300 nS (Tprogram parameter in datasheet). + * There is no maximum value for the pulse width. Check to make + * sure that INIT_B goes low after assertion of PROG_B + */ + (*fn->pgm) (TRUE, TRUE, cookie); + udelay (10); + ts = get_timer (0); + do { + if (get_timer (ts) > CFG_FPGA_WAIT_INIT) { + printf ("%s:%d: ** Timeout after %d mS waiting for INIT" + " to assert.\n", __FUNCTION__, __LINE__, + CFG_FPGA_WAIT_INIT); + (*fn->abort) (cookie); + return FPGA_FAIL; + } + } while (!(*fn->init) (cookie)); + + (*fn->pgm) (FALSE, TRUE, cookie); + CONFIG_FPGA_DELAY (); + (*fn->clk) (TRUE, TRUE, cookie); + + /* + * Start a timer and wait for INIT_B to go high + */ + ts = get_timer (0); + do { + CONFIG_FPGA_DELAY (); + if (get_timer (ts) > CFG_FPGA_WAIT_INIT) { + printf ("%s:%d: ** Timeout after %d mS waiting for INIT" + " to deassert.\n", __FUNCTION__, __LINE__, + CFG_FPGA_WAIT_INIT); + (*fn->abort) (cookie); + return FPGA_FAIL; + } + } while ((*fn->init) (cookie) && (*fn->busy) (cookie)); + + (*fn->wr) (TRUE, TRUE, cookie); + (*fn->cs) (TRUE, TRUE, cookie); + + udelay (10000); + + /* + * Load the data byte by byte + */ + while (bytecount < bsize) { +#ifdef CFG_FPGA_CHECK_CTRLC + if (ctrlc ()) { + (*fn->abort) (cookie); + return FPGA_FAIL; + } +#endif +#ifdef CFG_FPGA_CHECK_ERROR + if ((*fn->init) (cookie)) { + printf ("%s:%d: ** Error: INIT asserted during" + " configuration\n", __FUNCTION__, __LINE__); + (*fn->abort) (cookie); + return FPGA_FAIL; + } +#endif + (*fn->wdata) (data[bytecount++], TRUE, cookie); + CONFIG_FPGA_DELAY (); + + /* + * Cycle the clock pin + */ + (*fn->clk) (FALSE, TRUE, cookie); + CONFIG_FPGA_DELAY (); + (*fn->clk) (TRUE, TRUE, cookie); + +#ifdef CFG_FPGA_CHECK_BUSY + ts = get_timer (0); + while ((*fn->busy) (cookie)) { + if (get_timer (ts) > CFG_FPGA_WAIT_BUSY) { + printf ("%s:%d: ** Timeout after %d mS waiting for" + " BUSY to deassert\n", + __FUNCTION__, __LINE__, CFG_FPGA_WAIT_BUSY); + (*fn->abort) (cookie); + return FPGA_FAIL; + } + } +#endif + +#ifdef CFG_FPGA_PROG_FEEDBACK + if (bytecount % (bsize / 40) == 0) + putc ('.'); +#endif + } + + /* + * Finished writing the data; deassert FPGA CS_B and WRITE_B signals. + */ + CONFIG_FPGA_DELAY (); + (*fn->cs) (FALSE, TRUE, cookie); + (*fn->wr) (FALSE, TRUE, cookie); + +#ifdef CFG_FPGA_PROG_FEEDBACK + putc ('\n'); +#endif + + /* + * Check for successful configuration. FPGA INIT_B and DONE should + * both be high upon successful configuration. + */ + ts = get_timer (0); + ret_val = FPGA_SUCCESS; + while (((*fn->done) (cookie) == FPGA_FAIL) || (*fn->init) (cookie)) { + if (get_timer (ts) > CFG_FPGA_WAIT_CONFIG) { + printf ("%s:%d: ** Timeout after %d mS waiting for DONE to" + "assert and INIT to deassert\n", + __FUNCTION__, __LINE__, CFG_FPGA_WAIT_CONFIG); + (*fn->abort) (cookie); + ret_val = FPGA_FAIL; + break; + } + } + + if (ret_val == FPGA_SUCCESS) { +#ifdef CFG_FPGA_PROG_FEEDBACK + printf ("Initialization of FPGA device %d complete\n", cookie); +#endif + /* + * Run the post configuration function if there is one. + */ + if (*fn->post) { + (*fn->post) (cookie); + } + } else { +#ifdef CFG_FPGA_PROG_FEEDBACK + printf ("** Initialization of FPGA device %d FAILED\n", + cookie); +#endif + } + } else { + printf ("%s:%d: NULL Interface function table!\n", + __FUNCTION__, __LINE__); + } + return ret_val; +} + +/* + * Read the FPGA configuration data + */ +static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns; + + if (fn) { + unsigned char *data = (unsigned char *) buf; + size_t bytecount = 0; + int cookie = desc->cookie; + + printf ("Starting Dump of FPGA Device %d...\n", cookie); + + (*fn->cs) (TRUE, TRUE, cookie); + (*fn->clk) (TRUE, TRUE, cookie); + + while (bytecount < bsize) { +#ifdef CFG_FPGA_CHECK_CTRLC + if (ctrlc ()) { + (*fn->abort) (cookie); + return FPGA_FAIL; + } +#endif + /* + * Cycle the clock and read the data + */ + (*fn->clk) (FALSE, TRUE, cookie); + (*fn->clk) (TRUE, TRUE, cookie); + (*fn->rdata) (&(data[bytecount++]), cookie); +#ifdef CFG_FPGA_PROG_FEEDBACK + if (bytecount % (bsize / 40) == 0) + putc ('.'); +#endif + } + + /* + * Deassert CS_B and cycle the clock to deselect the device. + */ + (*fn->cs) (FALSE, FALSE, cookie); + (*fn->clk) (FALSE, TRUE, cookie); + (*fn->clk) (TRUE, TRUE, cookie); + +#ifdef CFG_FPGA_PROG_FEEDBACK + putc ('\n'); +#endif + puts ("Done.\n"); + } else { + printf ("%s:%d: NULL Interface function table!\n", + __FUNCTION__, __LINE__); + } + return ret_val; +} + +/* + * Relocate the addresses in the function table from FLASH (or ROM, + * or whatever) to RAM. + */ +static int Virtex2_ssm_reloc (Xilinx_desc * desc, ulong reloc_offset) +{ + ulong addr; + int ret_val = FPGA_FAIL; + Xilinx_Virtex2_Slave_SelectMap_fns *fn_r, *fn = + (Xilinx_Virtex2_Slave_SelectMap_fns *) (desc->iface_fns); + + if (fn) { + /* + * Get the relocated table address + */ + addr = (ulong) fn + reloc_offset; + fn_r = (Xilinx_Virtex2_Slave_SelectMap_fns *) addr; + + /* + * Check to see if the table has already been relocated. If not, do + * a sanity check to make sure there is a faithful copy of the + * FLASH based function table in RAM, then adjust the table. + */ + if (!fn_r->relocated) { + if (memcmp + (fn_r, fn, sizeof (Xilinx_Virtex2_Slave_SelectMap_fns)) + == 0) { + desc->iface_fns = fn_r; + } else { + PRINTF ("%s:%d: Invalid function table at 0x%p\n", + __FUNCTION__, __LINE__, fn_r); + return FPGA_FAIL; + } + + PRINTF ("%s:%d: Relocating descriptor at 0x%p\n", + __FUNCTION__, __LINE__, desc); + + addr = (ulong) (fn->pre) + reloc_offset; + fn_r->pre = (Xilinx_pre_fn) addr; + addr = (ulong) (fn->pgm) + reloc_offset; + fn_r->pgm = (Xilinx_pgm_fn) addr; + addr = (ulong) (fn->init) + reloc_offset; + fn_r->init = (Xilinx_init_fn) addr; + addr = (ulong) (fn->done) + reloc_offset; + fn_r->done = (Xilinx_done_fn) addr; + addr = (ulong) (fn->err) + reloc_offset; + fn_r->err = (Xilinx_err_fn) addr; + addr = (ulong) (fn->clk) + reloc_offset; + fn_r->clk = (Xilinx_clk_fn) addr; + addr = (ulong) (fn->cs) + reloc_offset; + fn_r->cs = (Xilinx_cs_fn) addr; + addr = (ulong) (fn->wr) + reloc_offset; + fn_r->wr = (Xilinx_wr_fn) addr; + addr = (ulong) (fn->rdata) + reloc_offset; + fn_r->rdata = (Xilinx_rdata_fn) addr; + addr = (ulong) (fn->wdata) + reloc_offset; + fn_r->wdata = (Xilinx_wdata_fn) addr; + addr = (ulong) (fn->busy) + reloc_offset; + fn_r->busy = (Xilinx_busy_fn) addr; + addr = (ulong) (fn->abort) + reloc_offset; + fn_r->abort = (Xilinx_abort_fn) addr; + addr = (ulong) (fn->post) + reloc_offset; + fn_r->post = (Xilinx_post_fn) addr; + fn_r->relocated = TRUE; + } else { + printf ("%s:%d: Function table @0x%p has already been relocated\n", __FUNCTION__, __LINE__, fn_r); + desc->iface_fns = fn_r; + } + ret_val = FPGA_SUCCESS; + } else { + printf ("%s: NULL Interface function table!\n", __FUNCTION__); + } + return ret_val; +} + +static int Virtex2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) +{ + printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__); + return FPGA_FAIL; +} + +static int Virtex2_ss_dump (Xilinx_desc * desc, void *buf, size_t bsize) +{ + printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__); + return FPGA_FAIL; +} + +static int Virtex2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset) +{ + int ret_val = FPGA_FAIL; + Xilinx_Virtex2_Slave_Serial_fns *fn = + (Xilinx_Virtex2_Slave_Serial_fns *) (desc->iface_fns); + + if (fn) { + printf ("%s:%d: Slave Serial Loading is unsupported\n", + __FUNCTION__, __LINE__); + } else { + printf ("%s:%d: NULL Interface function table!\n", + __FUNCTION__, __LINE__); + } + return ret_val; +} +#endif + +/* vim: set ts=4 tw=78: */ diff --git a/common/xilinx.c b/common/xilinx.c new file mode 100644 index 0000000000..cb153e14ef --- /dev/null +++ b/common/xilinx.c @@ -0,0 +1,269 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Xilinx FPGA support + */ + +#include +#include +#include + +#if (CONFIG_FPGA & CFG_FPGA_XILINX) + +#if 0 +#define FPGA_DEBUG +#endif + +/* Define FPGA_DEBUG to get debug printf's */ +#ifdef FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +/* Local Static Functions */ +static int xilinx_validate (Xilinx_desc * desc, char *fn); + +/* ------------------------------------------------------------------------- */ + +int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; /* assume a failure */ + + if (!xilinx_validate (desc, __FUNCTION__)) { + printf ("%s: Invalid device descriptor\n", __FUNCTION__); + } else + switch (desc->family) { + case Xilinx_Spartan2: +#if (CONFIG_FPGA & CFG_SPARTAN2) + PRINTF ("%s: Launching the Spartan-II Loader...\n", + __FUNCTION__); + ret_val = Spartan2_load (desc, buf, bsize); +#else + printf ("%s: No support for Spartan-II devices.\n", + __FUNCTION__); +#endif + break; + case Xilinx_Virtex2: +#if (CONFIG_FPGA & CFG_VIRTEX2) + PRINTF ("%s: Launching the Virtex-II Loader...\n", + __FUNCTION__); + ret_val = Virtex2_load (desc, buf, bsize); +#else + printf ("%s: No support for Virtex-II devices.\n", + __FUNCTION__); +#endif + break; + + default: + printf ("%s: Unsupported family type, %d\n", + __FUNCTION__, desc->family); + } + + return ret_val; +} + +int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; /* assume a failure */ + + if (!xilinx_validate (desc, __FUNCTION__)) { + printf ("%s: Invalid device descriptor\n", __FUNCTION__); + } else + switch (desc->family) { + case Xilinx_Spartan2: +#if (CONFIG_FPGA & CFG_SPARTAN2) + PRINTF ("%s: Launching the Spartan-II Reader...\n", + __FUNCTION__); + ret_val = Spartan2_dump (desc, buf, bsize); +#else + printf ("%s: No support for Spartan-II devices.\n", + __FUNCTION__); +#endif + break; + case Xilinx_Virtex2: +#if (CONFIG_FPGA & CFG_VIRTEX2) + PRINTF ("%s: Launching the Virtex-II Reader...\n", + __FUNCTION__); + ret_val = Virtex2_dump (desc, buf, bsize); +#else + printf ("%s: No support for Virtex-II devices.\n", + __FUNCTION__); +#endif + break; + + default: + printf ("%s: Unsupported family type, %d\n", + __FUNCTION__, desc->family); + } + + return ret_val; +} + +int xilinx_info (Xilinx_desc * desc) +{ + int ret_val = FPGA_FAIL; + + if (xilinx_validate (desc, __FUNCTION__)) { + printf ("Family: \t"); + switch (desc->family) { + case Xilinx_Spartan2: + printf ("Spartan-II\n"); + break; + case Xilinx_Virtex2: + printf ("Virtex-II\n"); + break; + /* Add new family types here */ + default: + printf ("Unknown family type, %d\n", desc->family); + } + + printf ("Interface type:\t"); + switch (desc->iface) { + case slave_serial: + printf ("Slave Serial\n"); + break; + case master_serial: /* Not used */ + printf ("Master Serial\n"); + break; + case slave_parallel: + printf ("Slave Parallel\n"); + break; + case jtag_mode: /* Not used */ + printf ("JTAG Mode\n"); + break; + case slave_selectmap: + printf ("Slave SelectMap Mode\n"); + break; + case master_selectmap: + printf ("Master SelectMap Mode\n"); + break; + /* Add new interface types here */ + default: + printf ("Unsupported interface type, %d\n", desc->iface); + } + + printf ("Device Size: \t%d bytes\n" + "Cookie: \t0x%x (%d)\n", + desc->size, desc->cookie, desc->cookie); + + if (desc->iface_fns) { + printf ("Device Function Table @ 0x%p\n", desc->iface_fns); + switch (desc->family) { + case Xilinx_Spartan2: +#if (CONFIG_FPGA & CFG_SPARTAN2) + Spartan2_info (desc); +#else + /* just in case */ + printf ("%s: No support for Spartan-II devices.\n", + __FUNCTION__); +#endif + break; + case Xilinx_Virtex2: +#if (CONFIG_FPGA & CFG_VIRTEX2) + Virtex2_info (desc); +#else + /* just in case */ + printf ("%s: No support for Virtex-II devices.\n", + __FUNCTION__); +#endif + break; + /* Add new family types here */ + default: + /* we don't need a message here - we give one up above */ + } + } else + printf ("No Device Function Table.\n"); + + ret_val = FPGA_SUCCESS; + } else { + printf ("%s: Invalid device descriptor\n", __FUNCTION__); + } + + return ret_val; +} + +int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset) +{ + int ret_val = FPGA_FAIL; /* assume a failure */ + + if (!xilinx_validate (desc, __FUNCTION__)) { + printf ("%s: Invalid device descriptor\n", __FUNCTION__); + } else + switch (desc->family) { + case Xilinx_Spartan2: +#if (CONFIG_FPGA & CFG_SPARTAN2) + ret_val = Spartan2_reloc (desc, reloc_offset); +#else + printf ("%s: No support for Spartan-II devices.\n", + __FUNCTION__); +#endif + break; + case Xilinx_Virtex2: +#if (CONFIG_FPGA & CFG_VIRTEX2) + ret_val = Virtex2_reloc (desc, reloc_offset); +#else + printf ("%s: No support for Virtex-II devices.\n", + __FUNCTION__); +#endif + break; + /* Add new family types here */ + default: + printf ("%s: Unsupported family type, %d\n", + __FUNCTION__, desc->family); + } + + return ret_val; +} + + +/* ------------------------------------------------------------------------- */ + +static int xilinx_validate (Xilinx_desc * desc, char *fn) +{ + int ret_val = FALSE; + + if (desc) { + if ((desc->family > min_xilinx_type) && + (desc->family < max_xilinx_type)) { + if ((desc->iface > min_xilinx_iface_type) && + (desc->iface < max_xilinx_iface_type)) { + if (desc->size) { + ret_val = TRUE; + } else + printf ("%s: NULL part size\n", fn); + } else + printf ("%s: Invalid Interface type, %d\n", + fn, desc->iface); + } else + printf ("%s: Invalid family type, %d\n", fn, desc->family); + } else + printf ("%s: NULL descriptor!\n", fn); + + return ret_val; +} + +#endif /* CONFIG_FPGA & CFG_FPGA_XILINX */ diff --git a/rtc/ds1337.c b/rtc/ds1337.c new file mode 100644 index 0000000000..9f0c8c01ef --- /dev/null +++ b/rtc/ds1337.c @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Keith Outwater, keith_outwater@mvis.com` + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) + * DS1337 Real Time Clock (RTC). + */ + +#include +#include +#include +#include + +#if defined(CONFIG_RTC_DS1337) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +/*---------------------------------------------------------------------*/ +#undef DEBUG_RTC + +#ifdef DEBUG_RTC +#define DEBUGR(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGR(fmt,args...) +#endif +/*---------------------------------------------------------------------*/ + +/* + * RTC register addresses + */ +#define RTC_SEC_REG_ADDR 0x0 +#define RTC_MIN_REG_ADDR 0x1 +#define RTC_HR_REG_ADDR 0x2 +#define RTC_DAY_REG_ADDR 0x3 +#define RTC_DATE_REG_ADDR 0x4 +#define RTC_MON_REG_ADDR 0x5 +#define RTC_YR_REG_ADDR 0x6 +#define RTC_CTL_REG_ADDR 0x0e +#define RTC_STAT_REG_ADDR 0x0f + +/* + * RTC control register bits + */ +#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */ +#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */ +#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */ +#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */ +#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */ +#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */ + +/* + * RTC status register bits + */ +#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */ +#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */ +#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */ + + +static uchar rtc_read (uchar reg); +static void rtc_write (uchar reg, uchar val); +static uchar bin2bcd (unsigned int n); +static unsigned bcd2bin (uchar c); + + +/* + * Get the current time from the RTC + */ +void rtc_get (struct rtc_time *tmp) +{ + uchar sec, min, hour, mday, wday, mon_cent, year, control, status; + + control = rtc_read (RTC_CTL_REG_ADDR); + status = rtc_read (RTC_STAT_REG_ADDR); + sec = rtc_read (RTC_SEC_REG_ADDR); + min = rtc_read (RTC_MIN_REG_ADDR); + hour = rtc_read (RTC_HR_REG_ADDR); + wday = rtc_read (RTC_DAY_REG_ADDR); + mday = rtc_read (RTC_DATE_REG_ADDR); + mon_cent = rtc_read (RTC_MON_REG_ADDR); + year = rtc_read (RTC_YR_REG_ADDR); + + DEBUGR ("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " + "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", + year, mon_cent, mday, wday, hour, min, sec, control, status); + + if (status & RTC_STAT_BIT_OSF) { + printf ("### Warning: RTC oscillator has stopped\n"); + /* clear the OSF flag */ + rtc_write (RTC_STAT_REG_ADDR, + rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); + } + + tmp->tm_sec = bcd2bin (sec & 0x7F); + tmp->tm_min = bcd2bin (min & 0x7F); + tmp->tm_hour = bcd2bin (hour & 0x3F); + tmp->tm_mday = bcd2bin (mday & 0x3F); + tmp->tm_mon = bcd2bin (mon_cent & 0x1F); + tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900); + tmp->tm_wday = bcd2bin ((wday - 1) & 0x07); + tmp->tm_yday = 0; + tmp->tm_isdst= 0; + + DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +} + + +/* + * Set the RTC + */ +void rtc_set (struct rtc_time *tmp) +{ + uchar century; + + DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100)); + + century = (tmp->tm_year >= 2000) ? 0x80 : 0; + rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century); + + rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1)); + rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday)); + rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour)); + rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min)); + rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec)); +} + + +/* + * Reset the RTC. We also enable the oscillator output on the + * SQW/INTB* pin and program it for 32,768 Hz output. Note that + * according to the datasheet, turning on the square wave output + * increases the current drain on the backup battery from about + * 600 nA to 2uA. + */ +void rtc_reset (void) +{ + rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2); +} + + +/* + * Helper functions + */ + +static +uchar rtc_read (uchar reg) +{ + return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg)); +} + + +static void rtc_write (uchar reg, uchar val) +{ + i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); +} + +static unsigned bcd2bin (uchar n) +{ + return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); +} + +static unsigned char bin2bcd (unsigned int n) +{ + return (((n / 10) << 4) | (n % 10)); +} + +#endif /* CONFIG_RTC_DS1337 && (CFG_COMMANDS & CFG_CMD_DATE) */