From: Dirk Eibach Date: Wed, 28 Oct 2015 10:46:36 +0000 (+0100) Subject: hrcon: Add fan controllers X-Git-Tag: v2016.01-rc1~20 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=5c3b6dc1fb415d316744b284513c908e96426567;p=oweals%2Fu-boot.git hrcon: Add fan controllers Signed-off-by: Dirk Eibach --- diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 0aa1849758..ce230455c8 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_IO64) += miiphybb.o obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o ch7301.o obj-$(CONFIG_DLVISION_10G) += osd.o dp501.o obj-$(CONFIG_CONTROLCENTERD) += dp501.o -obj-$(CONFIG_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o +obj-$(CONFIG_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o obj-$(CONFIG_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o +obj-$(CONFIG_STRIDER) += fanctrl.o obj-$(CONFIG_STRIDER_CON) += osd.o diff --git a/board/gdsys/common/fanctrl.c b/board/gdsys/common/fanctrl.c new file mode 100644 index 0000000000..44569bb1ab --- /dev/null +++ b/board/gdsys/common/fanctrl.c @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +enum { + FAN_CONFIG = 0x03, + FAN_TACHLIM_LSB = 0x48, + FAN_TACHLIM_MSB = 0x49, + FAN_PWM_FREQ = 0x4D, +}; + +void init_fan_controller(u8 addr) +{ + int val; + + /* set PWM Frequency to 2.5% resolution */ + i2c_reg_write(addr, FAN_PWM_FREQ, 20); + + /* set Tachometer Limit */ + i2c_reg_write(addr, FAN_TACHLIM_LSB, 0x10); + i2c_reg_write(addr, FAN_TACHLIM_MSB, 0x0a); + + /* enable Tach input */ + val = i2c_reg_read(addr, FAN_CONFIG) | 0x04; + i2c_reg_write(addr, FAN_CONFIG, val); +} diff --git a/board/gdsys/common/fanctrl.h b/board/gdsys/common/fanctrl.h new file mode 100644 index 0000000000..12bc850f85 --- /dev/null +++ b/board/gdsys/common/fanctrl.h @@ -0,0 +1,13 @@ +/* + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FANCTRL_H_ +#define _FANCTRL_H_ + +void init_fan_controller(u8 addr); + +#endif diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c index 3cc03cbdad..880b6387de 100644 --- a/board/gdsys/mpc8308/hrcon.c +++ b/board/gdsys/mpc8308/hrcon.c @@ -26,6 +26,7 @@ #include "../common/osd.h" #include "../common/mclink.h" #include "../common/phy.h" +#include "../common/fanctrl.h" #include #include @@ -52,6 +53,11 @@ enum { unsigned int mclink_fpgacount; struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; +struct { + u8 bus; + u8 addr; +} hrcon_fans[] = CONFIG_HRCON_FANS; + int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) { int res; @@ -199,6 +205,11 @@ int last_stage_init(void) } } + for (k = 0; k < ARRAY_SIZE(hrcon_fans); ++k) { + i2c_set_bus_num(hrcon_fans[k].bus); + init_fan_controller(hrcon_fans[k].addr); + } + return 0; } diff --git a/board/gdsys/mpc8308/strider.c b/board/gdsys/mpc8308/strider.c index 8e5d5de8f7..ef5b6c03f8 100644 --- a/board/gdsys/mpc8308/strider.c +++ b/board/gdsys/mpc8308/strider.c @@ -28,6 +28,7 @@ #include "../common/mclink.h" #include "../common/osd.h" #include "../common/phy.h" +#include "../common/fanctrl.h" #include #include @@ -51,13 +52,6 @@ enum { GPIO_MDIO = 1 << 15, }; -enum { - FAN_CONFIG = 0x03, - FAN_TACHLIM_LSB = 0x48, - FAN_TACHLIM_MSB = 0x49, - FAN_PWM_FREQ = 0x4D, -}; - unsigned int mclink_fpgacount; struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; @@ -128,22 +122,6 @@ int checkboard(void) return 0; } -static void init_fan_controller(u8 addr) -{ - int val; - - /* set PWM Frequency to 2.5% resolution */ - i2c_reg_write(addr, FAN_PWM_FREQ, 20); - - /* set Tachometer Limit */ - i2c_reg_write(addr, FAN_TACHLIM_LSB, 0x10); - i2c_reg_write(addr, FAN_TACHLIM_MSB, 0x0a); - - /* enable Tach input */ - val = i2c_reg_read(addr, FAN_CONFIG) | 0x04; - i2c_reg_write(addr, FAN_CONFIG, val); -} - int last_stage_init(void) { int slaves; diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index b000a0ec02..5ffc974479 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -501,3 +501,31 @@ U_BOOT_I2C_ADAP_COMPLETE(soft7, soft_i2c_init, soft_i2c_probe, CONFIG_SYS_I2C_SOFT_SLAVE_8, 7) #endif +#if defined(I2C_SOFT_DECLARATIONS9) +U_BOOT_I2C_ADAP_COMPLETE(soft8, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_9, + CONFIG_SYS_I2C_SOFT_SLAVE_9, + 8) +#endif +#if defined(I2C_SOFT_DECLARATIONS10) +U_BOOT_I2C_ADAP_COMPLETE(soft9, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_10, + CONFIG_SYS_I2C_SOFT_SLAVE_10, + 9) +#endif +#if defined(I2C_SOFT_DECLARATIONS11) +U_BOOT_I2C_ADAP_COMPLETE(soft10, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_11, + CONFIG_SYS_I2C_SOFT_SLAVE_11, + 10) +#endif +#if defined(I2C_SOFT_DECLARATIONS12) +U_BOOT_I2C_ADAP_COMPLETE(soft11, soft_i2c_init, soft_i2c_probe, + soft_i2c_read, soft_i2c_write, NULL, + CONFIG_SYS_I2C_SOFT_SPEED_12, + CONFIG_SYS_I2C_SOFT_SLAVE_12, + 11) +#endif diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 16d5885e37..84d0928a67 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -378,8 +378,6 @@ #define I2C_SOFT_DECLARATIONS4 #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F - -#ifdef CONFIG_HRCON_DH #define I2C_SOFT_DECLARATIONS5 #define CONFIG_SYS_I2C_SOFT_SPEED_5 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_5 0x7F @@ -392,14 +390,32 @@ #define I2C_SOFT_DECLARATIONS8 #define CONFIG_SYS_I2C_SOFT_SPEED_8 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_8 0x7F + +#ifdef CONFIG_HRCON_DH +#define I2C_SOFT_DECLARATIONS9 +#define CONFIG_SYS_I2C_SOFT_SPEED_9 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_9 0x7F +#define I2C_SOFT_DECLARATIONS10 +#define CONFIG_SYS_I2C_SOFT_SPEED_10 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_10 0x7F +#define I2C_SOFT_DECLARATIONS11 +#define CONFIG_SYS_I2C_SOFT_SPEED_11 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_11 0x7F +#define I2C_SOFT_DECLARATIONS12 +#define CONFIG_SYS_I2C_SOFT_SPEED_12 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_12 0x7F #endif #ifdef CONFIG_HRCON_DH -#define CONFIG_SYS_ICS8N3QV01_I2C {9, 10, 11, 12, 13, 14, 15, 16} +#define CONFIG_SYS_ICS8N3QV01_I2C {13, 14, 15, 16, 17, 18, 19, 20} #define CONFIG_SYS_DP501_I2C {1, 3, 5, 7, 2, 4, 6, 8} +#define CONFIG_HRCON_FANS { {10, 0x4c}, {11, 0x4c}, \ + {12, 0x4c} } #else -#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} +#define CONFIG_SYS_ICS8N3QV01_I2C {9, 10, 11, 12} #define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} +#define CONFIG_HRCON_FANS { {6, 0x4c}, {7, 0x4c}, \ + {8, 0x4c} } #endif #ifndef __ASSEMBLY__ @@ -410,33 +426,37 @@ void fpga_control_set(unsigned int bus, int pin); void fpga_control_clear(unsigned int bus, int pin); #endif +#define I2C_SDA_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0040 : 0x0200) +#define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0020 : 0x0100) +#define I2C_FPGA_IDX (I2C_ADAP_HWNR % 4) + #ifdef CONFIG_HRCON_DH #define I2C_ACTIVE \ do { \ - if (I2C_ADAP_HWNR > 3) \ - fpga_control_set(I2C_ADAP_HWNR, 0x0004); \ + if (I2C_ADAP_HWNR > 7) \ + fpga_control_set(I2C_FPGA_IDX, 0x0004); \ else \ - fpga_control_clear(I2C_ADAP_HWNR, 0x0004); \ + fpga_control_clear(I2C_FPGA_IDX, 0x0004); \ } while (0) #else #define I2C_ACTIVE { } #endif #define I2C_TRISTATE { } #define I2C_READ \ - (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0) + (fpga_gpio_get(I2C_FPGA_IDX, I2C_SDA_GPIO) ? 1 : 0) #define I2C_SDA(bit) \ do { \ if (bit) \ - fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \ + fpga_gpio_set(I2C_FPGA_IDX, I2C_SDA_GPIO); \ else \ - fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \ + fpga_gpio_clear(I2C_FPGA_IDX, I2C_SDA_GPIO); \ } while (0) #define I2C_SCL(bit) \ do { \ if (bit) \ - fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ + fpga_gpio_set(I2C_FPGA_IDX, I2C_SCL_GPIO); \ else \ - fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \ + fpga_gpio_clear(I2C_FPGA_IDX, I2C_SCL_GPIO); \ } while (0) #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */