From: Andrew Cameron Date: Thu, 7 Nov 2019 02:12:55 +0000 (-0600) Subject: ath79: add support for the TP-LINK WBS510 V2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21;p=oweals%2Fopenwrt.git ath79: add support for the TP-LINK WBS510 V2 This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron --- diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts new file mode 100644 index 0000000000..5c55d78904 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tplink_cpexxx-v1.dtsi" + +/ { + compatible = "tplink,wbs510-v2", "qca,ar9344"; + model = "TP-Link WBS510 v2"; +}; + +&led_link4 { + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index d54e770240..5bb1d92a60 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -175,7 +175,8 @@ tplink,cpe210-v1|\ tplink,cpe220-v2|\ tplink,cpe220-v3|\ tplink,cpe510-v1|\ -tplink,wbs210-v2) +tplink,wbs210-v2|\ +tplink,wbs510-v2) ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 07f3c4e83c..dcc0b8be23 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -92,6 +92,7 @@ ath79_setup_interfaces() tplink,cpe220-v3|\ tplink,cpe510-v1|\ tplink,wbs210-v2|\ + tplink,wbs510-v2|\ ubnt,nanostation-m|\ ubnt,routerstation) ucidef_set_interfaces_lan_wan "eth1" "eth0" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches index 9bce6cc51b..844b212152 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches @@ -46,7 +46,8 @@ tplink,cpe210-v1|\ tplink,cpe220-v2|\ tplink,cpe220-v3|\ tplink,cpe510-v1|\ -tplink,wbs210-v2) +tplink,wbs210-v2|\ +tplink,wbs510-v2) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" ;; ubnt,nanostation-ac) diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 114c20d3d5..6efed954e4 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -548,3 +548,14 @@ define Device/tplink_wbs210-v2 TPLINK_BOARD_ID := WBS210V2 endef TARGET_DEVICES += tplink_wbs210-v2 + +define Device/tplink_wbs510-v2 + $(Device/tplink-loader-okli) + ATH_SOC := ar9344 + IMAGE_SIZE := 7680k + DEVICE_MODEL := WBS510 + DEVICE_VARIANT := v2 + DEVICE_PACKAGES := rssileds + TPLINK_BOARD_ID := WBS510V2 +endef +TARGET_DEVICES += tplink_wbs510-v2 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 3ec1fb6ce7..89955725d0 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -570,6 +570,39 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "support-list", }, + { + .id = "WBS510V2", + .vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n", + .support_list = + "SupportList:\r\n" + "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n" + "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n" + "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n" + "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n", + .support_trail = '\xff', + .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"partition-table", 0x20000, 0x02000}, + {"default-mac", 0x30000, 0x00020}, + {"product-info", 0x31100, 0x00100}, + {"signature", 0x32000, 0x00400}, + {"os-image", 0x40000, 0x200000}, + {"file-system", 0x240000, 0x570000}, + {"soft-version", 0x7b0000, 0x00100}, + {"support-list", 0x7b1000, 0x00400}, + {"user-config", 0x7c0000, 0x10000}, + {"default-config", 0x7d0000, 0x10000}, + {"log", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "support-list", + }, + /** Firmware layout for the C2600 */ { .id = "C2600",