From: Peng Fan Date: Thu, 11 Aug 2016 06:02:50 +0000 (+0800) Subject: imx: imx6ull: adjust the ldo 1.2v bandgap voltage X-Git-Tag: v2016.11-rc2~19^2~29 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=5b66482d44b4e9571c64285254a43bdfe9ed1262;p=oweals%2Fu-boot.git imx: imx6ull: adjust the ldo 1.2v bandgap voltage Per to design team, on i.MX6UL, the LDO 1.2V bandgap voltage is 30mV higher, so we need to adjust the REFTOP_VBGADJ(anatop MISC0 bit[6:4]) setting to 2b'110. Signed-off-by: Peng Fan Signed-off-by: Bai Ping Cc: Stefano Babic --- diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index ff1c4f4dcb..bc3e634bb5 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -314,6 +314,12 @@ static void init_bandgap(void) * be set. */ writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set); + /* + * On i.MX6ULL, the LDO 1.2V bandgap voltage is 30mV higher. so set + * VBGADJ bits to 2b'110 to adjust it. + */ + if (is_mx6ull()) + writel(BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ, &anatop->ana_misc0_set); } diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 7a55aecb7f..f74737a68e 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -1271,6 +1271,7 @@ struct mxc_ccm_reg { (((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC) #define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008 +#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x60 #define BM_PMU_MISC2_AUDIO_DIV_MSB (1 << 23) #define BP_PMU_MISC2_AUDIO_DIV_MSB 23