From: Peng Fan Date: Fri, 21 Dec 2018 06:21:37 +0000 (+0000) Subject: imx8qxp: mek: update README X-Git-Tag: v2019.04-rc1~17^2~23 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=59ceb152f84811a89f9f23c52e4eb0c805b9d618;p=oweals%2Fu-boot.git imx8qxp: mek: update README Update README after we switch to use SPL Signed-off-by: Peng Fan --- diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README index e91e193d11..f32290e3a2 100644 --- a/board/freescale/imx8qxp_mek/README +++ b/board/freescale/imx8qxp_mek/README @@ -39,16 +39,18 @@ $ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin . Build U-Boot ============ - +$ export ATF_LOAD_ADDR=0x80000000 +$ export BL33_LOAD_ADDR=0x80020000 $ make imx8qxp_mek_defconfig -$ make +$ make flash.bin +$ dd if=u-boot.itb of=flash.bin bs=512 seek=528 Flash the binary into the SD card ================================= Burn the flash.bin binary to SD card offset 32KB: -$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32 +$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 Boot ====