From: Andrew F. Davis <afd@ti.com>
Date: Mon, 31 Jul 2017 15:58:21 +0000 (-0500)
Subject: ARM: k2g: Add FIT image handler for PMMC firmware
X-Git-Tag: v2017.11-rc1~158
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=58fac52d2ffbac22dedcde5baa915d2c764a56d1;p=oweals%2Fu-boot.git

ARM: k2g: Add FIT image handler for PMMC firmware

The PMMC firmware should be bundled into a FIT image on HS
devices to allow authentication/decryption, add a handler to
process this PMMC firmware.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---

diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 15f0f54af6..f1c4ddcd30 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -13,6 +13,7 @@
 #include <asm/arch/mmc_host_def.h>
 #include <fdtdec.h>
 #include <i2c.h>
+#include <remoteproc.h>
 #include "mux-k2g.h"
 #include "../common/board_detect.h"
 
@@ -353,3 +354,23 @@ int get_num_eth_ports(void)
 	return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
 }
 #endif
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+void board_pmmc_image_process(ulong pmmc_image, size_t pmmc_size)
+{
+	int id = getenv_ulong("dev_pmmc", 10, 0);
+	int ret;
+
+	if (!rproc_is_initialized())
+		rproc_init();
+
+	ret = rproc_load(id, pmmc_image, pmmc_size);
+	printf("Load Remote Processor %d with data@addr=0x%08lx %u bytes:%s\n",
+	       id, pmmc_image, pmmc_size, ret ? " Failed!" : " Success!");
+
+	if (!ret)
+		rproc_start(id);
+}
+
+U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_PMMC, board_pmmc_image_process);
+#endif