From: Vladimir Kot Date: Sat, 12 Jan 2019 09:43:28 +0000 (+0900) Subject: ramips: add support for ZyXEL Keenetic Start X-Git-Tag: v19.07.0-rc1~903 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=58becdb30d1048903ad704a227a52bdf695a0087;p=oweals%2Fopenwrt.git ramips: add support for ZyXEL Keenetic Start Device specification: - SoC: RT5350F - CPU Frequency: 360 MHz - Flash Chip: Winbond 25Q32 (4096 KiB) - RAM: 32768 KiB - 5x 10/100 Mbps Ethernet (4x LAN, 1x WAN) - 1x external, non-detachable antenna - UART (J1) header on PCB (57800 8n1) - Wireless: SoC-intergated: 2.4GHz 802.11bgn - USB: None - 3x LED, 2x button Flash instruction: 1. Configure PC with static IP 192.168.1.2/24 and start TFTP server. 2. Rename "openwrt-ramips-rt305x-kn_st-squashfs-sysupgrade.bin" to "kstart_recovery.bin" and place it in TFTP server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power LED start blinking. 4. Router will download file from TFTP server, write it to flash and reboot. Signed-off-by: Vladimir Kot [fixed git commit author and whitespace issues in DTS] Signed-off-by: Petr Štetiar --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index b42e04f223..e05260f35a 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -468,6 +468,9 @@ zyxel,keenetic-extra-ii) set_wifi_led "$boardname:green:wifi" ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01" ;; +zyxel,keenetic-start) + set_wifi_led "rt2800pci-phy0::radio" + ;; youku-yk1) set_wifi_led "$boardname:blue:air" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 9f656199a8..f9f1e208f6 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -451,6 +451,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:2" "1:lan:1" "4:wan" "6@eth0" ;; + zyxel,keenetic-start) + ucidef_add_switch "switch0" \ + "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0" + ;; *) RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` if [ -n "${RT3X5X}" ]; then @@ -659,6 +663,9 @@ ramips_setup_macs() xiaomi,mir3p) lan_mac=$(mtd_get_mac_binary Factory 0xe006) ;; + zyxel,keenetic-start) + wan_mac=$(mtd_get_mac_binary factory 40) + ;; *) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) diff --git a/target/linux/ramips/dts/kn_st.dts b/target/linux/ramips/dts/kn_st.dts new file mode 100644 index 0000000000..16ab9567c0 --- /dev/null +++ b/target/linux/ramips/dts/kn_st.dts @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "rt5350.dtsi" + +#include +#include + +/ { + compatible = "zyxel,keenetic-start", "ralink,rt5350-soc"; + model = "ZyXEL Keenetic Start"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + leds { + compatible = "gpio-leds"; + + led_status: power { + label = "zyxel:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "zyxel:green:internet"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + + +&esw { + mediatek,portmap = <0x2f>; + mediatek,led_polarity = <0x17>; +}; + +&wmac { + status = "okay"; + ralink,led-polarity = <1>; + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk index 163726e1e1..c67384f071 100644 --- a/target/linux/ramips/image/rt305x.mk +++ b/target/linux/ramips/image/rt305x.mk @@ -910,6 +910,13 @@ define Device/kn endef TARGET_DEVICES += kn +define Device/zyxel_keenetic-start + DTS := kn_st + IMAGE_SIZE := $(ralink_default_fw_size_4M) + DEVICE_TITLE := ZyXEL Keenetic Start +endef +TARGET_DEVICES += zyxel_keenetic-start + define Device/zorlik_zl5900v2 DTS := ZL5900V2 DEVICE_TITLE := Zorlik ZL5900V2