From: Aleksander Jan Bajkowski Date: Sat, 2 May 2020 16:26:29 +0000 (+0200) Subject: lantiq: remove unused PHY drivers on xrx200 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=58a6f06978f8c1995fefee01d6c3c6f3c78b36c9;p=oweals%2Fopenwrt.git lantiq: remove unused PHY drivers on xrx200 All boards on xrx200 use builtin switch and there is no supported device with external switch. It was copy paste from xway subtarget and was added in commit 18b76c66fbfea0e21ff66c6df432fa109c5bbb43. Save 20.3 kB flash memory. Signed-off-by: Aleksander Jan Bajkowski --- diff --git a/target/linux/lantiq/xrx200/config-4.19 b/target/linux/lantiq/xrx200/config-4.19 index 0c14f3dadc..c9451ec363 100644 --- a/target/linux/lantiq/xrx200/config-4.19 +++ b/target/linux/lantiq/xrx200/config-4.19 @@ -1,5 +1,3 @@ -CONFIG_ADM6996_PHY=y -CONFIG_AR8216_PHY=y CONFIG_AT803X_PHY=y CONFIG_BLK_MQ_PCI=y CONFIG_CPU_MIPSR2_IRQ_EI=y @@ -69,10 +67,6 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_RFS_ACCEL=y CONFIG_RPS=y -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8367B_PHY=y -CONFIG_RTL8367_PHY=y CONFIG_SENSORS_LTQ_CPUTEMP=y CONFIG_SGL_ALLOC=y CONFIG_SMP=y diff --git a/target/linux/lantiq/xrx200/config-5.4 b/target/linux/lantiq/xrx200/config-5.4 index cad6ebf1ae..b3749b927a 100644 --- a/target/linux/lantiq/xrx200/config-5.4 +++ b/target/linux/lantiq/xrx200/config-5.4 @@ -1,5 +1,3 @@ -CONFIG_ADM6996_PHY=y -CONFIG_AR8216_PHY=y CONFIG_AT803X_PHY=y CONFIG_BLK_MQ_PCI=y CONFIG_CPU_MIPSR2_IRQ_EI=y @@ -74,10 +72,6 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_RFS_ACCEL=y CONFIG_RPS=y -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8367B_PHY=y -CONFIG_RTL8367_PHY=y CONFIG_SENSORS_LTQ_CPUTEMP=y CONFIG_SGL_ALLOC=y CONFIG_SMP=y