From: Mark Jackson <mpfj-list@mimc.co.uk>
Date: Fri, 13 Feb 2009 15:48:18 +0000 (+0000)
Subject: Setup extra MIMC200 chip selects
X-Git-Tag: v2009.06-rc1~145^2~1^2
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=58a518c3d8a2c7de11d414e8b903495daee7dc7e;hp=-c;p=oweals%2Fu-boot.git

Setup extra MIMC200 chip selects

Added code to setup the extra Flash and FRAM chip selects as used on the
MIMC200 board.

V2 moves the init code from the common "cpu.c" file into the board specific
setup file.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---

58a518c3d8a2c7de11d414e8b903495daee7dc7e
diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 62c0943f57..6df741e397 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -30,6 +30,8 @@
 #include <asm/arch/portmux.h>
 #include <lcd.h>
 
+#include "../../../cpu/at32ap/hsmc3.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static const struct sdram_config sdram_config = {
@@ -86,6 +88,18 @@ int board_early_init_f(void)
 	/* release phys reset */
 	gpio_set_value(GPIO_PIN_PC(18), 0);	/* PHY RESET (Release)	*/
 
+	/* setup Data Flash chip select (NCS2) */
+	hsmc3_writel(MODE2, 0x20121003);
+	hsmc3_writel(CYCLE2, 0x000a0009);
+	hsmc3_writel(PULSE2, 0x0a060806);
+	hsmc3_writel(SETUP2, 0x00030102);
+
+	/* setup FRAM chip select (NCS3) */
+	hsmc3_writel(MODE3, 0x10120001);
+	hsmc3_writel(CYCLE3, 0x001e001d);
+	hsmc3_writel(PULSE3, 0x08040704);
+	hsmc3_writel(SETUP3, 0x02050204);
+
 #if defined(CONFIG_MACB)
 	/* init macb0 pins */
 	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);