From: Soeren Moch <smoch@web.de>
Date: Thu, 7 Nov 2019 11:11:21 +0000 (+0100)
Subject: arm: dts: rk3399-rockpro64: sync dts from linux kernel
X-Git-Tag: v2020.01-rc3~2^2~26
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=5824ad3453b0792cfcfbe2bccf61143549c62591;p=oweals%2Fu-boot.git

arm: dts: rk3399-rockpro64: sync dts from linux kernel

The most important change for u-boot is the fix for the vdd-log pwm
voltage regulator to avoid overvoltage for the VD_LOGIC power domain.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
index 1f2394e058..e544deb61d 100644
--- a/arch/arm/dts/rk3399-rockpro64.dts
+++ b/arch/arm/dts/rk3399-rockpro64.dts
@@ -58,6 +58,13 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;
@@ -166,7 +173,7 @@
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
+		regulator-max-microvolt = <1700000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 };
@@ -222,6 +229,10 @@
 	status = "okay";
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
@@ -236,8 +247,8 @@
 	rk808: pmic@1b {
 		compatible = "rockchip,rk808";
 		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
@@ -504,11 +515,25 @@
 	status = "okay";
 
 	bt656-supply = <&vcc1v8_dvp>;
-	audio-supply = <&vcca1v8_codec>;
+	audio-supply = <&vcc_3v0>;
 	sdmmc-supply = <&vcc_sdio>;
 	gpio1830-supply = <&vcc_3v0>;
 };
 
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
 &pmu_io_domains {
 	pmu1830-supply = <&vcc_3v0>;
 	status = "okay";
@@ -538,6 +563,10 @@
 	};
 
 	pcie {
+		pcie_perst: pcie-perst {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		pcie_pwr_en: pcie-pwr-en {
 			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -545,7 +574,7 @@
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
 		vsel1_gpio: vsel1-gpio {
@@ -580,6 +609,10 @@
 	status = "okay";
 };
 
+&pwm1 {
+	status = "okay";
+};
+
 &pwm2 {
 	status = "okay";
 };
@@ -591,7 +624,6 @@
 
 &sdmmc {
 	bus-width = <4>;
-	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 	disable-wp;
@@ -603,12 +635,21 @@
 
 &sdhci {
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &tcphy0 {
 	status = "okay";
 };