From: Peng Fan Date: Mon, 20 Jun 2016 01:43:09 +0000 (+0800) Subject: ehci: mx7: fix otg id detection X-Git-Tag: v2016.07~17^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=57de41e9c944af8d2c7bfcc2358414c5dd8c39df;p=oweals%2Fu-boot.git ehci: mx7: fix otg id detection The USBNC_PHYCFG2_ACAENB bit should be cleared to enable the OTG ID detection, not set it. When the bit is set, the ACA Resistance Detection is enabled, which disables the OTG ID detection, because the internal pull up is off. Signed-off-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index cc3b11ce4e..069f116ed2 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -208,8 +208,11 @@ static void usb_power_config(int index) (0x10000 * index) + USBNC_OFFSET); void __iomem *phy_cfg2 = (void __iomem *)(&usbnc->phy_cfg2); - /* Enable usb_otg_id detection */ - setbits_le32(phy_cfg2, USBNC_PHYCFG2_ACAENB); + /* + * Clear the ACAENB to enable usb_otg_id detection, + * otherwise it is the ACA detection enabled. + */ + clrbits_le32(phy_cfg2, USBNC_PHYCFG2_ACAENB); } int usb_phy_mode(int port)