From: Matthias Brugger Date: Wed, 6 Nov 2019 14:41:03 +0000 (+0100) Subject: ARM: defconfig: add unified config for RPi3 and RPi4 X-Git-Tag: v2020.01-rc4~9^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=5694090670e262b038377bf196188d8089dc90c4;p=oweals%2Fu-boot.git ARM: defconfig: add unified config for RPi3 and RPi4 Provide a defconfig which allows us to boot Raspberrry Pi 4 and Raspberry Pi 3 Model B/B+ Instead of using the embedded DTB as done in RPi3 we use the devicetree provided by the firmware. Signed-off-by: Matthias Brugger --- diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index e8e0ff0eb4..00419bf254 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -188,6 +188,13 @@ config TARGET_RPI_4 This option creates a build targeting the ARMv8/AArch64 ISA. select BCM2711_64B +config TARGET_RPI_ARM64 + bool "Raspberry Pi one binary 64-bit build" + help + Support for all armv8 based Raspberry Pi variants, such as + the RPi 4 model B, in AArch64 (64-bit) mode. + select ARM64 + endchoice config SYS_BOARD diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig new file mode 100644 index 0000000000..f4e113f58c --- /dev/null +++ b/configs/rpi_arm64_defconfig @@ -0,0 +1,45 @@ +CONFIG_ARM=y +CONFIG_ARM64=y +CONFIG_TARGET_RPI_ARM64=y +CONFIG_ARCH_BCM283X=y +CONFIG_SYS_TEXT_BASE=0x00080000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="usb start" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_PROMPT="U-Boot> " +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_FS_UUID=y +CONFIG_OF_BOARD=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_DM_KEYBOARD=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_BCM2835=y +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_GENERIC is not set +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_LAN78XX=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_DM_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_CONSOLE_SCROLL_LINES=10 +CONFIG_PHYS_TO_BUS=y +CONFIG_OF_LIBFDT_OVERLAY=y