From: Gabor Juhos Date: Tue, 1 Sep 2009 19:34:27 +0000 (+0000) Subject: initial support for Asus RT-N15 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=552e298755bc66211fae3748ff5c2ec24d1b199e;p=librecmc%2Flibrecmc.git initial support for Asus RT-N15 SVN-Revision: 17463 --- diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 267d9f3c62..8bc3857b78 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -10,6 +10,7 @@ enum ramips_mach_type { RAMIPS_MACH_GENERIC, + RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ }; diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig index bab02dde68..3c7df5fcf7 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig @@ -2,6 +2,11 @@ if RALINK_RT288X menu "Ralink RT288x machine selection" +config RT288X_MACH_RT_N15 + bool "Asus RT-N15 board support" + default y + select RALINK_DEV_GPIO_LEDS + endmenu endif diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile index fc06fa4796..cac4187d6e 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile @@ -11,3 +11,5 @@ obj-y := prom.o irq.o setup.o rt288x.o devices.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c new file mode 100644 index 0000000000..be5c815cb5 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c @@ -0,0 +1,82 @@ +/* + * Asus RT-N15 board support + * + * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "devices.h" + +#define RT_N15_GPIO_LED_POWER 11 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition rt_n15_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0b0000, + }, { + .name = "rootfs", + .offset = 0x100000, + .size = 0x300000, + }, { + .name = "openwrt", + .offset = 0x050000, + .size = 0x3b0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data rt_n15_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(rt_n15_partitions), + .parts = rt_n15_partitions, +#endif +}; + +static struct gpio_led rt_n15_leds_gpio[] __initdata = { + { + .name = "rt-n15:blue:power", + .gpio = RT_N15_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static void __init rt_n15_init(void) +{ + rt288x_register_flash(0, &rt_n15_flash_data); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio), + rt_n15_leds_gpio); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N15, "Asus RT-N15", rt_n15_init); diff --git a/target/linux/ramips/rt288x/config-2.6.30 b/target/linux/ramips/rt288x/config-2.6.30 index 63afd63a9d..0bab2d0d70 100644 --- a/target/linux/ramips/rt288x/config-2.6.30 +++ b/target/linux/ramips/rt288x/config-2.6.30 @@ -117,6 +117,7 @@ CONFIG_PHYLIB=y # CONFIG_PROM_EMU is not set CONFIG_RALINK_RT288X=y # CONFIG_RALINK_RT305X is not set +CONFIG_RT288X_MACH_RT_N15=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set # CONFIG_SERIAL_8250_EXTENDED is not set