From: TsiChung Liew Date: Wed, 10 Mar 2010 22:14:01 +0000 (-0600) Subject: ColdFire: M5271EVB DRAM Bring up issue X-Git-Tag: v2010.06-rc1~139^2~7^2~7 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=53e4290f20b5f73c95717f47f4c04ed6932ff931;p=oweals%2Fu-boot.git ColdFire: M5271EVB DRAM Bring up issue Fix proper portsize: The register for portsize is either 00b, 01b, or 1xb. The value that previous assigned is 32d. Fix DRAM bring up: insert asm("nop") for every DRAM register setup Signed-off-by: TsiChung Liew --- diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c index 5505cc42c6..446f102e58 100644 --- a/board/freescale/m5271evb/m5271evb.c +++ b/board/freescale/m5271evb/m5271evb.c @@ -47,6 +47,7 @@ phys_size_t initdram (int board_type) { MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS | MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE | MCF_GPIO_SDRAM_SDCS_11); + asm(" nop"); /* * Check to see if the SDRAM has already been initialized @@ -55,8 +56,9 @@ phys_size_t initdram (int board_type) { if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) { /* Initialize DRAM Control Register: DCR */ mbar_writeShort(MCF_SDRAMC_DCR, - MCF_SDRAMC_DCR_RTIM(0x01) - | MCF_SDRAMC_DCR_RC(0x30)); + MCF_SDRAMC_DCR_RTIM(2) + | MCF_SDRAMC_DCR_RC(0x2E)); + asm(" nop"); /* * Initialize DACR0 @@ -70,15 +72,18 @@ phys_size_t initdram (int board_type) { | MCF_SDRAMC_DACRn_CASL(1) | MCF_SDRAMC_DACRn_CBM(3) | MCF_SDRAMC_DACRn_PS(0)); + asm(" nop"); /* Initialize DMR0 */ mbar_writeLong(MCF_SDRAMC_DMR0, MCF_SDRAMC_DMRn_BAM_16M | MCF_SDRAMC_DMRn_V); + asm(" nop"); /* Set IP bit in DACR */ mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) | MCF_SDRAMC_DACRn_IP); + asm(" nop"); /* Wait at least 20ns to allow banks to precharge */ for (i = 0; i < 5; i++) @@ -86,6 +91,7 @@ phys_size_t initdram (int board_type) { /* Write to this block to initiate precharge */ *(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5; + asm(" nop"); /* Set RE bit in DACR */ mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) @@ -98,6 +104,7 @@ phys_size_t initdram (int board_type) { /* Finish the configuration by issuing the MRS */ mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) | MCF_SDRAMC_DACRn_MRS); + asm(" nop"); /* * Write to the SDRAM Mode Register A0-A11 = 0x400 @@ -109,6 +116,7 @@ phys_size_t initdram (int board_type) { * Burst Length = 1 */ *(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5; + asm(" nop"); } return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;