From: David Updegraff Date: Mon, 11 Jun 2007 15:41:07 +0000 (-0500) Subject: multicast tftp: RFC2090 X-Git-Tag: v1.3.0-rc1~19^2~24 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=53a5c424bf86;p=oweals%2Fu-boot.git multicast tftp: RFC2090 Implemented IETF RFC2090, Multicast TFTP. Initial implementation on Realtek RTL8139 and Freescale TSEC. Signed-off-by: David Updegraff Signed-off-by: Ben Warren --- diff --git a/README b/README index 6af6aaa02f..291b304688 100644 --- a/README +++ b/README @@ -1066,6 +1066,16 @@ The following options need to be configured: Defines a default value for theIP address of a TFTP server to contact when using the "tftboot" command. +- Multicast TFTP Mode: + CONFIG_MCAST_TFTP + + Defines whether you want to support multicast TFTP as per + rfc-2090; for example to work with atftp. Lets lots of targets + tftp down the same boot image concurrently. Note: the ethernet + driver in use must provide a function: mcast() to join/leave a + multicast group. + + CONFIG_BOOTP_RANDOM_DELAY - BOOTP Recovery Mode: CONFIG_BOOTP_RANDOM_DELAY diff --git a/drivers/rtl8139.c b/drivers/rtl8139.c index 9045523a31..3e259b6b1b 100644 --- a/drivers/rtl8139.c +++ b/drivers/rtl8139.c @@ -193,6 +193,10 @@ static void rtl_reset(struct eth_device *dev); static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length); static int rtl_poll(struct eth_device *dev); static void rtl_disable(struct eth_device *dev); +#ifdef CONFIG_MCAST_TFTP/* This driver already accepts all b/mcast */ +static int rtl_bcast_addr (struct eth_device *dev, u8 bcast_mac, u8 set) + { return (0); } +#endif static struct pci_device_id supported[] = { {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139}, @@ -228,6 +232,9 @@ int rtl8139_initialize(bd_t *bis) dev->halt = rtl_disable; dev->send = rtl_transmit; dev->recv = rtl_poll; +#ifdef CONFIG_MCAST_TFTP + dev->mcast = rtl_bcast_addr; +#endif eth_register (dev); diff --git a/drivers/tsec.c b/drivers/tsec.c index c011123494..fd21ed4edc 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -129,6 +129,9 @@ static int tsec_miiphy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value); static int tsec_miiphy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value); +#ifdef CONFIG_MCAST_TFTP +static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set); +#endif /* Initialize device structure. Returns success if PHY * initialization succeeded (i.e. if it recognizes the PHY) @@ -167,6 +170,9 @@ int tsec_initialize(bd_t * bis, int index, char *devname) dev->halt = tsec_halt; dev->send = tsec_send; dev->recv = tsec_recv; +#ifdef CONFIG_MCAST_TFTP + dev->mcast = tsec_mcast_addr; +#endif /* Tell u-boot to get the addr from the env */ for (i = 0; i < 6; i++) @@ -1539,4 +1545,46 @@ static int tsec_miiphy_write(char *devname, unsigned char addr, #endif +#ifdef CONFIG_MCAST_TFTP + +/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */ + +/* Set the appropriate hash bit for the given addr */ + +/* The algorithm works like so: + * 1) Take the Destination Address (ie the multicast address), and + * do a CRC on it (little endian), and reverse the bits of the + * result. + * 2) Use the 8 most significant bits as a hash into a 256-entry + * table. The table is controlled through 8 32-bit registers: + * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is + * gaddr7. This means that the 3 most significant bits in the + * hash index which gaddr register to use, and the 5 other bits + * indicate which bit (assuming an IBM numbering scheme, which + * for PowerPC (tm) is usually the case) in the tregister holds + * the entry. */ +static int +tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set) +{ + struct tsec_private *priv = privlist[1]; + volatile tsec_t *regs = priv->regs; + volatile u32 *reg_array, value; + u8 result, whichbit, whichreg; + + result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff); + whichbit = result & 0x1f; /* the 5 LSB = which bit to set */ + whichreg = result >> 5; /* the 3 MSB = which reg to set it in */ + value = (1 << (31-whichbit)); + + reg_array = &(regs->hash.gaddr0); + + if (set) { + reg_array[whichreg] |= value; + } else { + reg_array[whichreg] &= ~value; + } + return 0; +} +#endif /* Multicast TFTP ? */ + #endif /* CONFIG_TSEC_ENET */ diff --git a/include/net.h b/include/net.h index aa58e333a6..603452ab32 100644 --- a/include/net.h +++ b/include/net.h @@ -99,10 +99,12 @@ struct eth_device { int state; int (*init) (struct eth_device*, bd_t*); - int (*send) (struct eth_device*, volatile void* pachet, int length); + int (*send) (struct eth_device*, volatile void* packet, int length); int (*recv) (struct eth_device*); void (*halt) (struct eth_device*); - +#ifdef CONFIG_MCAST_TFTP + int (*mcast) (struct eth_device*, u32 ip, u8 set); +#endif struct eth_device *next; void *priv; }; @@ -124,6 +126,11 @@ extern int eth_rx(void); /* Check for received packets */ extern void eth_halt(void); /* stop SCC */ extern char *eth_get_name(void); /* get name of current device */ +#ifdef CONFIG_MCAST_TFTP +int eth_mcast_join( IPaddr_t mcast_addr, u8 join); +u32 ether_crc (size_t len, unsigned char const *p); +#endif + /**********************************************************************/ /* diff --git a/net/eth.c b/net/eth.c index c8f92a5263..9ccbccac0f 100644 --- a/net/eth.c +++ b/net/eth.c @@ -353,6 +353,51 @@ void eth_set_enetaddr(int num, char *addr) { memcpy(dev->enetaddr, enetaddr, 6); } +#ifdef CONFIG_MCAST_TFTP +/* Multicast. + * mcast_addr: multicast ipaddr from which multicast Mac is made + * join: 1=join, 0=leave. + */ +int eth_mcast_join( IPaddr_t mcast_ip, u8 join) +{ + u8 mcast_mac[6]; + if (!eth_current || !eth_current->mcast) + return -1; + mcast_mac[5] = htonl(mcast_ip) & 0xff; + mcast_mac[4] = (htonl(mcast_ip)>>8) & 0xff; + mcast_mac[3] = (htonl(mcast_ip)>>16) & 0x7f; + mcast_mac[2] = 0x5e; + mcast_mac[1] = 0x0; + mcast_mac[0] = 0x1; + return eth_current->mcast(eth_current, mcast_mac, join); +} + +/* the 'way' for ethernet-CRC-32. Spliced in from Linux lib/crc32.c + * and this is the ethernet-crc method needed for TSEC -- and perhaps + * some other adapter -- hash tables + */ +#define CRCPOLY_LE 0xedb88320 +u32 ether_crc (size_t len, unsigned char const *p) +{ + int i; + u32 crc; + crc = ~0; + while (len--) { + crc ^= *p++; + for (i = 0; i < 8; i++) + crc = (crc >> 1) ^ ((crc & 1) ? CRCPOLY_LE : 0); + } + /* an reverse the bits, cuz of way they arrive -- last-first */ + crc = (crc >> 16) | (crc << 16); + crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00); + crc = (crc >> 4 & 0x0f0f0f0f) | (crc << 4 & 0xf0f0f0f0); + crc = (crc >> 2 & 0x33333333) | (crc << 2 & 0xcccccccc); + crc = (crc >> 1 & 0x55555555) | (crc << 1 & 0xaaaaaaaa); + return crc; +} + +#endif + int eth_init(bd_t *bis) { diff --git a/net/net.c b/net/net.c index e9d7757641..2b11a13657 100644 --- a/net/net.c +++ b/net/net.c @@ -118,6 +118,10 @@ char NetOurHostName[32]={0,}; /* Our hostname */ char NetOurRootPath[64]={0,}; /* Our bootpath */ ushort NetBootFileSize=0; /* Our bootfile size in blocks */ +#ifdef CONFIG_MCAST_TFTP /* Multicast TFTP */ +IPaddr_t Mcast_addr; +#endif + /** END OF BOOTP EXTENTIONS **/ ulong NetBootFileXferSize; /* The actual transferred size of the bootfile (in bytes) */ @@ -1386,6 +1390,9 @@ NetReceive(volatile uchar * inpkt, int len) } tmp = NetReadIP(&ip->ip_dst); if (NetOurIP && tmp != NetOurIP && tmp != 0xFFFFFFFF) { +#ifdef CONFIG_MCAST_TFTP + if (Mcast_addr != tmp) +#endif return; } /* @@ -1492,6 +1499,7 @@ NetReceive(volatile uchar * inpkt, int len) } #endif + #ifdef CONFIG_NETCONSOLE nc_input_packet((uchar *)ip +IP_HDR_SIZE, ntohs(ip->udp_dst), diff --git a/net/tftp.c b/net/tftp.c index d56e30b5b5..95fee775ec 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -61,10 +61,43 @@ static char *tftp_filename; extern flash_info_t flash_info[]; #endif +/* 512 is poor choice for ethernet, MTU is typically 1500. + * Minus eth.hdrs thats 1468. Can get 2x better throughput with + * almost-MTU block sizes. At least try... fall back to 512 if need be. + */ +#define TFTP_MTU_BLOCKSIZE 1468 +static unsigned short TftpBlkSize=TFTP_BLOCK_SIZE; +static unsigned short TftpBlkSizeOption=TFTP_MTU_BLOCKSIZE; + +#ifdef CONFIG_MCAST_TFTP +#include +#define MTFTP_BITMAPSIZE 0x1000 +static unsigned *Bitmap; +static int PrevBitmapHole,Mapsize=MTFTP_BITMAPSIZE; +static uchar ProhibitMcast=0, MasterClient=0; +static uchar Multicast=0; +extern IPaddr_t Mcast_addr; +static int Mcast_port; +static ulong TftpEndingBlock; /* can get 'last' block before done..*/ + +static void parse_multicast_oack(char *pkt,int len); + +static void +mcast_cleanup(void) +{ + if (Mcast_addr) eth_mcast_join(Mcast_addr, 0); + if (Bitmap) free(Bitmap); + Bitmap=NULL; + Mcast_addr = Multicast = Mcast_port = 0; + TftpEndingBlock = -1; +} + +#endif /* CONFIG_MCAST_TFTP */ + static __inline__ void store_block (unsigned block, uchar * src, unsigned len) { - ulong offset = block * TFTP_BLOCK_SIZE + TftpBlockWrapOffset; + ulong offset = block * TftpBlkSize + TftpBlockWrapOffset; ulong newsize = offset + len; #ifdef CFG_DIRECT_FLASH_TFTP int i, rc = 0; @@ -90,6 +123,10 @@ store_block (unsigned block, uchar * src, unsigned len) { (void)memcpy((void *)(load_addr + offset), src, len); } +#ifdef CONFIG_MCAST_TFTP + if (Multicast) + ext2_set_bit(block, Bitmap); +#endif if (NetBootFileXferSize < newsize) NetBootFileXferSize = newsize; @@ -108,6 +145,13 @@ TftpSend (void) int len = 0; volatile ushort *s; +#ifdef CONFIG_MCAST_TFTP + /* Multicast TFTP.. non-MasterClients do not ACK data. */ + if (Multicast + && (TftpState == STATE_DATA) + && (MasterClient == 0)) + return; +#endif /* * We will always be sending some sort of packet, so * cobble together the packet headers now. @@ -132,11 +176,30 @@ TftpSend (void) printf("send option \"timeout %s\"\n", (char *)pkt); #endif pkt += strlen((char *)pkt) + 1; + /* try for more effic. blk size */ + pkt += sprintf((char *)pkt,"blksize%c%d%c", + 0,htons(TftpBlkSizeOption),0); +#ifdef CONFIG_MCAST_TFTP + /* Check all preconditions before even trying the option */ + if (!ProhibitMcast + && (Bitmap=malloc(Mapsize)) + && eth_get_dev()->mcast) { + free(Bitmap); + Bitmap=NULL; + pkt += sprintf((char *)pkt,"multicast%c%c",0,0); + } +#endif /* CONFIG_MCAST_TFTP */ len = pkt - xp; break; - case STATE_DATA: case STATE_OACK: +#ifdef CONFIG_MCAST_TFTP + /* My turn! Start at where I need blocks I missed.*/ + if (Multicast) + TftpBlock=ext2_find_next_zero_bit(Bitmap,(Mapsize*8),0); + /*..falling..*/ +#endif + case STATE_DATA: xp = pkt; s = (ushort *)pkt; *s++ = htons(TFTP_ACK); @@ -177,8 +240,13 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) { ushort proto; ushort *s; + int i; if (dest != TftpOurPort) { +#ifdef CONFIG_MCAST_TFTP + if (Multicast + && (!Mcast_port || (dest != Mcast_port))) +#endif return; } if (TftpState != STATE_RRQ && src != TftpServerPort) { @@ -208,6 +276,24 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) #endif TftpState = STATE_OACK; TftpServerPort = src; + /* Check for 'blksize' option */ + for (i=0;i>20); } else { if (((TftpBlock - 1) % 10) == 0) { @@ -248,6 +334,11 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) TftpBlockWrap = 0; TftpBlockWrapOffset = 0; +#ifdef CONFIG_MCAST_TFTP + if (Multicast) { /* start!=1 common if mcast */ + TftpLastBlock = TftpBlock - 1; + } else +#endif if (TftpBlock != 1) { /* Assertion */ printf ("\nTFTP error: " "First block is not block 1 (%ld)\n" @@ -274,9 +365,44 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) * Acknoledge the block just received, which will prompt * the server for the next one. */ +#ifdef CONFIG_MCAST_TFTP + /* if I am the MasterClient, actively calculate what my next + * needed block is; else I'm passive; not ACKING + */ + if (Multicast) { + if (len < TftpBlkSize) { + TftpEndingBlock = TftpBlock; + } else if (MasterClient) { + TftpBlock = PrevBitmapHole = + ext2_find_next_zero_bit( + Bitmap, + (Mapsize*8), + PrevBitmapHole); + if (TftpBlock > ((Mapsize*8) - 1)) { + printf ("tftpfile too big\n"); + /* try to double it and retry */ + Mapsize<<=1; + mcast_cleanup(); + NetStartAgain (); + return; + } + TftpLastBlock = TftpBlock; + } + } +#endif TftpSend (); - if (len < TFTP_BLOCK_SIZE) { +#ifdef CONFIG_MCAST_TFTP + if (Multicast) { + if (MasterClient && (TftpBlock >= TftpEndingBlock)) { + puts ("\nMulticast tftp done\n"); + mcast_cleanup(); + NetState = NETLOOP_SUCCESS; + } + } + else +#endif + if (len < TftpBlkSize) { /* * We received the whole thing. Try to * run it. @@ -290,6 +416,9 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) printf ("\nTFTP error: '%s' (%d)\n", pkt + 2, ntohs(*(ushort *)pkt)); puts ("Starting again\n\n"); +#ifdef CONFIG_MCAST_TFTP + mcast_cleanup(); +#endif NetStartAgain (); break; } @@ -301,6 +430,9 @@ TftpTimeout (void) { if (++TftpTimeoutCount > TIMEOUT_COUNT) { puts ("\nRetry count exceeded; starting again\n"); +#ifdef CONFIG_MCAST_TFTP + mcast_cleanup(); +#endif NetStartAgain (); } else { puts ("T "); @@ -370,6 +502,7 @@ TftpStart (void) TftpState = STATE_RRQ; /* Use a pseudo-random port unless a specific port is set */ TftpOurPort = 1024 + (get_timer(0) % 3072); + #ifdef CONFIG_TFTP_PORT if ((ep = getenv("tftpdstp")) != NULL) { TftpServerPort = simple_strtol(ep, NULL, 10); @@ -382,8 +515,103 @@ TftpStart (void) /* zero out server ether in case the server ip has changed */ memset(NetServerEther, 0, 6); + /* Revert TftpBlkSize to dflt */ + TftpBlkSize = TFTP_BLOCK_SIZE; +#ifdef CONFIG_MCAST_TFTP + mcast_cleanup(); +#endif TftpSend (); } -#endif +#ifdef CONFIG_MCAST_TFTP +/* Credits: atftp project. + */ + +/* pick up BcastAddr, Port, and whether I am [now] the master-client. * + * Frame: + * +-------+-----------+---+-------~~-------+---+ + * | opc | multicast | 0 | addr, port, mc | 0 | + * +-------+-----------+---+-------~~-------+---+ + * The multicast addr/port becomes what I listen to, and if 'mc' is '1' then + * I am the new master-client so must send ACKs to DataBlocks. If I am not + * master-client, I'm a passive client, gathering what DataBlocks I may and + * making note of which ones I got in my bitmask. + * In theory, I never go from master->passive.. + * .. this comes in with pkt already pointing just past opc + */ +static void parse_multicast_oack(char *pkt, int len) +{ + int i; + IPaddr_t addr; + char *mc_adr, *port, *mc; + + mc_adr=port=mc=NULL; + /* march along looking for 'multicast\0', which has to start at least + * 14 bytes back from the end. + */ + for (i=0;i= (len-14)) /* non-Multicast OACK, ign. */ + return; + + i+=10; /* strlen multicast */ + mc_adr = pkt+i; + for (;i