From: Cédric Le Goater Date: Mon, 29 Oct 2018 06:06:33 +0000 (+0100) Subject: net: ftgmac100: add MDIO bus and phylib support X-Git-Tag: v2019.01-rc1~36^2^2~18 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=538e75d3fc54a237ae2e92c12459296339d591e2;p=oweals%2Fu-boot.git net: ftgmac100: add MDIO bus and phylib support Implement the MDIO bus read/write functions using the readl_poll_timeout() routine, initialize the bus and scan for the PHY. RGMII and RMII mode are supported. Signed-off-by: Cédric Le Goater Reviewed-by: Joel Stanley Acked-by: Joe Hershberger --- diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c index 78cd9df629..b6e6f6e5ec 100644 --- a/drivers/net/ftgmac100.c +++ b/drivers/net/ftgmac100.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "ftgmac100.h" @@ -29,6 +30,16 @@ /* PKTBUFSTX/PKTBUFSRX must both be power of 2 */ #define PKTBUFSTX 4 /* must be power of 2 */ +/* Timeout for a mdio read/write operation */ +#define FTGMAC100_MDIO_TIMEOUT_USEC 10000 + +/* + * MDC clock cycle threshold + * + * 20us * 100 = 2ms > (1 / 2.5Mhz) * 0x34 + */ +#define MDC_CYCTHR 0x34 + /** * struct ftgmac100_data - private data for the FTGMAC100 driver * @@ -38,6 +49,10 @@ * @tx_index: Transmit descriptor index in @txdes * @rx_index: Receive descriptor index in @rxdes * @phy_addr: The PHY interface address to use + * @phydev: The PHY device backing the MAC + * @bus: The mdio bus + * @phy_mode: The mode of the PHY interface (rgmii, rmii, ...) + * @max_speed: Maximum speed of Ethernet connection supported by MAC */ struct ftgmac100_data { struct ftgmac100 *iobase; @@ -48,234 +63,110 @@ struct ftgmac100_data { struct ftgmac100_rxdes *rxdes; int tx_index; int rx_index; - int phy_addr; + + u32 phy_addr; + struct phy_device *phydev; + struct mii_dev *bus; + u32 phy_mode; + u32 max_speed; }; /* * struct mii_bus functions */ -static int ftgmac100_mdiobus_read(struct ftgmac100_data *priv, int phy_addr, - int regnum) +static int ftgmac100_mdio_read(struct mii_dev *bus, int phy_addr, int dev_addr, + int reg_addr) { + struct ftgmac100_data *priv = bus->priv; struct ftgmac100 *ftgmac100 = priv->iobase; int phycr; - int i; - - phycr = readl(&ftgmac100->phycr); - - /* preserve MDC cycle threshold */ - phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; - - phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) - | FTGMAC100_PHYCR_REGAD(regnum) - | FTGMAC100_PHYCR_MIIRD; + int data; + int ret; + phycr = FTGMAC100_PHYCR_MDC_CYCTHR(MDC_CYCTHR) | + FTGMAC100_PHYCR_PHYAD(phy_addr) | + FTGMAC100_PHYCR_REGAD(reg_addr) | + FTGMAC100_PHYCR_MIIRD; writel(phycr, &ftgmac100->phycr); - for (i = 0; i < 10; i++) { - phycr = readl(&ftgmac100->phycr); - - if ((phycr & FTGMAC100_PHYCR_MIIRD) == 0) { - int data; - - data = readl(&ftgmac100->phydata); - return FTGMAC100_PHYDATA_MIIRDATA(data); - } - - mdelay(10); + ret = readl_poll_timeout(&ftgmac100->phycr, phycr, + !(phycr & FTGMAC100_PHYCR_MIIRD), + FTGMAC100_MDIO_TIMEOUT_USEC); + if (ret) { + pr_err("%s: mdio read failed (phy:%d reg:%x)\n", + priv->phydev->dev->name, phy_addr, reg_addr); + return ret; } - debug("mdio read timed out\n"); - return -1; + data = readl(&ftgmac100->phydata); + + return FTGMAC100_PHYDATA_MIIRDATA(data); } -static int ftgmac100_mdiobus_write(struct ftgmac100_data *priv, int phy_addr, - int regnum, u16 value) +static int ftgmac100_mdio_write(struct mii_dev *bus, int phy_addr, int dev_addr, + int reg_addr, u16 value) { + struct ftgmac100_data *priv = bus->priv; struct ftgmac100 *ftgmac100 = priv->iobase; int phycr; int data; - int i; - - phycr = readl(&ftgmac100->phycr); - - /* preserve MDC cycle threshold */ - phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; - - phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) - | FTGMAC100_PHYCR_REGAD(regnum) - | FTGMAC100_PHYCR_MIIWR; + int ret; + phycr = FTGMAC100_PHYCR_MDC_CYCTHR(MDC_CYCTHR) | + FTGMAC100_PHYCR_PHYAD(phy_addr) | + FTGMAC100_PHYCR_REGAD(reg_addr) | + FTGMAC100_PHYCR_MIIWR; data = FTGMAC100_PHYDATA_MIIWDATA(value); writel(data, &ftgmac100->phydata); writel(phycr, &ftgmac100->phycr); - for (i = 0; i < 10; i++) { - phycr = readl(&ftgmac100->phycr); - - if ((phycr & FTGMAC100_PHYCR_MIIWR) == 0) { - debug("(phycr & FTGMAC100_PHYCR_MIIWR) == 0: " \ - "phy_addr: %x\n", phy_addr); - return 0; - } - - mdelay(1); + ret = readl_poll_timeout(&ftgmac100->phycr, phycr, + !(phycr & FTGMAC100_PHYCR_MIIWR), + FTGMAC100_MDIO_TIMEOUT_USEC); + if (ret) { + pr_err("%s: mdio write failed (phy:%d reg:%x)\n", + priv->phydev->dev->name, phy_addr, reg_addr); } - debug("mdio write timed out\n"); - return -1; + return ret; } -int ftgmac100_phy_read(struct ftgmac100_data *priv, int addr, int reg, - u16 *value) +static int ftgmac100_mdio_init(struct udevice *dev) { - *value = ftgmac100_mdiobus_read(priv, addr, reg); - - if (*value == -1) - return -1; - - return 0; -} - -int ftgmac100_phy_write(struct ftgmac100_data *priv, int addr, int reg, - u16 value) -{ - if (ftgmac100_mdiobus_write(priv, addr, reg, value) == -1) - return -1; - - return 0; -} - -static int ftgmac100_phy_reset(struct ftgmac100_data *priv, struct udevice *dev) -{ - int i; - u16 status, adv; - - adv = ADVERTISE_CSMA | ADVERTISE_ALL; - - ftgmac100_phy_write(priv, priv->phy_addr, MII_ADVERTISE, adv); - - printf("%s: Starting autonegotiation...\n", dev->name); - - ftgmac100_phy_write(priv, priv->phy_addr, - MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART)); - - for (i = 0; i < 100000 / 100; i++) { - ftgmac100_phy_read(priv, priv->phy_addr, MII_BMSR, &status); - - if (status & BMSR_ANEGCOMPLETE) - break; - mdelay(1); - } - - if (status & BMSR_ANEGCOMPLETE) { - printf("%s: Autonegotiation complete\n", dev->name); - } else { - printf("%s: Autonegotiation timed out (status=0x%04x)\n", - dev->name, status); - return 0; - } - - return 1; -} - -static int ftgmac100_phy_init(struct ftgmac100_data *priv, struct udevice *dev) -{ - int phy_addr; - u16 phy_id, status, adv, lpa, stat_ge; - int media, speed, duplex; - int i; - - /* Check if the PHY is up to snuff... */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - - ftgmac100_phy_read(priv, phy_addr, MII_PHYSID1, &phy_id); - - /* - * When it is unable to found PHY, - * the interface usually return 0xffff or 0x0000 - */ - if (phy_id != 0xffff && phy_id != 0x0) { - printf("%s: found PHY at 0x%02x\n", - dev->name, phy_addr); - priv->phy_addr = phy_addr; - break; - } - } - - if (phy_id == 0xffff || phy_id == 0x0) { - printf("%s: no PHY present\n", dev->name); - return 0; - } - - ftgmac100_phy_read(priv, priv->phy_addr, MII_BMSR, &status); - - if (!(status & BMSR_LSTATUS)) { - /* Try to re-negotiate if we don't have link already. */ - ftgmac100_phy_reset(priv, dev); - - for (i = 0; i < 100000 / 100; i++) { - ftgmac100_phy_read(priv, priv->phy_addr, - MII_BMSR, &status); - if (status & BMSR_LSTATUS) - break; - udelay(100); - } - } - - if (!(status & BMSR_LSTATUS)) { - printf("%s: link down\n", dev->name); - return 0; - } - -#ifdef CONFIG_FTGMAC100_EGIGA - /* 1000 Base-T Status Register */ - ftgmac100_phy_read(dev, priv->phy_addr, - MII_STAT1000, &stat_ge); + struct ftgmac100_data *priv = dev_get_priv(dev); + struct mii_dev *bus; + int ret; - speed = (stat_ge & (LPA_1000FULL | LPA_1000HALF) - ? 1 : 0); + bus = mdio_alloc(); + if (!bus) + return -ENOMEM; - duplex = ((stat_ge & LPA_1000FULL) - ? 1 : 0); + bus->read = ftgmac100_mdio_read; + bus->write = ftgmac100_mdio_write; + bus->priv = priv; - if (speed) { /* Speed is 1000 */ - printf("%s: link up, 1000bps %s-duplex\n", - dev->name, duplex ? "full" : "half"); - return 0; + ret = mdio_register_seq(bus, dev->seq); + if (ret) { + free(bus); + return ret; } -#endif - - ftgmac100_phy_read(priv, priv->phy_addr, MII_ADVERTISE, &adv); - ftgmac100_phy_read(priv, priv->phy_addr, MII_LPA, &lpa); - - media = mii_nway_result(lpa & adv); - speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0); - duplex = (media & ADVERTISE_FULL) ? 1 : 0; - printf("%s: link up, %sMbps %s-duplex\n", - dev->name, speed ? "100" : "10", duplex ? "full" : "half"); + priv->bus = bus; - return 1; + return 0; } -static int ftgmac100_update_link_speed(struct ftgmac100_data *priv) +static int ftgmac100_phy_adjust_link(struct ftgmac100_data *priv) { struct ftgmac100 *ftgmac100 = priv->iobase; - unsigned short stat_fe; - unsigned short stat_ge; - unsigned int maccr; - -#ifdef CONFIG_FTGMAC100_EGIGA - /* 1000 Base-T Status Register */ - ftgmac100_phy_read(priv, priv->phy_addr, MII_STAT1000, &stat_ge); -#endif - - ftgmac100_phy_read(priv, priv->phy_addr, MII_BMSR, &stat_fe); + struct phy_device *phydev = priv->phydev; + u32 maccr; - if (!(stat_fe & BMSR_LSTATUS)) /* link status up? */ - return 0; + if (!phydev->link) { + dev_err(phydev->dev, "No link\n"); + return -EREMOTEIO; + } /* read MAC control register and clear related bits */ maccr = readl(&ftgmac100->maccr) & @@ -283,43 +174,42 @@ static int ftgmac100_update_link_speed(struct ftgmac100_data *priv) FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_FULLDUP); -#ifdef CONFIG_FTGMAC100_EGIGA - if (stat_ge & LPA_1000FULL) { - /* set gmac for 1000BaseTX and Full Duplex */ - maccr |= FTGMAC100_MACCR_GIGA_MODE | FTGMAC100_MACCR_FULLDUP; - } - - if (stat_ge & LPA_1000HALF) { - /* set gmac for 1000BaseTX and Half Duplex */ + if (phy_interface_is_rgmii(phydev) && phydev->speed == 1000) maccr |= FTGMAC100_MACCR_GIGA_MODE; - } -#endif - - if (stat_fe & BMSR_100FULL) { - /* set MII for 100BaseTX and Full Duplex */ - maccr |= FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_FULLDUP; - } - - if (stat_fe & BMSR_10FULL) { - /* set MII for 10BaseT and Full Duplex */ - maccr |= FTGMAC100_MACCR_FULLDUP; - } - if (stat_fe & BMSR_100HALF) { - /* set MII for 100BaseTX and Half Duplex */ + if (phydev->speed == 100) maccr |= FTGMAC100_MACCR_FAST_MODE; - } - if (stat_fe & BMSR_10HALF) { - /* set MII for 10BaseT and Half Duplex */ - /* we have already clear these bits, do nothing */ - ; - } + if (phydev->duplex) + maccr |= FTGMAC100_MACCR_FULLDUP; /* update MII config into maccr */ writel(maccr, &ftgmac100->maccr); - return 1; + return 0; +} + +static int ftgmac100_phy_init(struct udevice *dev) +{ + struct ftgmac100_data *priv = dev_get_priv(dev); + struct phy_device *phydev; + int ret; + + phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode); + if (!phydev) + return -ENODEV; + + phydev->supported &= PHY_GBIT_FEATURES; + if (priv->max_speed) { + ret = phy_set_supported(phydev, priv->max_speed); + if (ret) + return ret; + } + phydev->advertising = phydev->supported; + priv->phydev = phydev; + phy_config(phydev); + + return 0; } /* @@ -366,6 +256,8 @@ static void ftgmac100_stop(struct udevice *dev) debug("%s()\n", __func__); writel(0, &ftgmac100->maccr); + + phy_shutdown(priv->phydev); } static int ftgmac100_start(struct udevice *dev) @@ -373,10 +265,12 @@ static int ftgmac100_start(struct udevice *dev) struct eth_pdata *plat = dev_get_platdata(dev); struct ftgmac100_data *priv = dev_get_priv(dev); struct ftgmac100 *ftgmac100 = priv->iobase; + struct phy_device *phydev = priv->phydev; struct ftgmac100_txdes *txdes; struct ftgmac100_rxdes *rxdes; unsigned int maccr; void *buf; + int ret; int i; debug("%s()\n", __func__); @@ -462,11 +356,21 @@ static int ftgmac100_start(struct udevice *dev) writel(maccr, &ftgmac100->maccr); - if (!ftgmac100_phy_init(priv, dev)) { - if (!ftgmac100_update_link_speed(priv)) - return -1; + ret = phy_startup(phydev); + if (ret) { + dev_err(phydev->dev, "Could not start PHY\n"); + return ret; } + ret = ftgmac100_phy_adjust_link(priv); + if (ret) { + dev_err(phydev->dev, "Could not adjust link\n"); + return ret; + } + + printf("%s: link up, %d Mbps %s-duplex mac:%pM\n", phydev->dev->name, + phydev->speed, phydev->duplex ? "full" : "half", plat->enetaddr); + return 0; } @@ -574,8 +478,20 @@ static int ftgmac100_write_hwaddr(struct udevice *dev) static int ftgmac100_ofdata_to_platdata(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); + const char *phy_mode; pdata->iobase = devfdt_get_addr(dev); + pdata->phy_interface = -1; + phy_mode = dev_read_string(dev, "phy-mode"); + if (phy_mode) + pdata->phy_interface = phy_get_interface_by_name(phy_mode); + if (pdata->phy_interface == -1) { + dev_err(dev, "Invalid PHY interface '%s'\n", phy_mode); + return -EINVAL; + } + + pdata->max_speed = dev_read_u32_default(dev, "max-speed", 0); + return 0; } @@ -583,13 +499,37 @@ static int ftgmac100_probe(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); struct ftgmac100_data *priv = dev_get_priv(dev); + int ret; priv->iobase = (struct ftgmac100 *)pdata->iobase; - return 0; + priv->phy_mode = pdata->phy_interface; + priv->max_speed = pdata->max_speed; + priv->phy_addr = 0; + + ret = ftgmac100_mdio_init(dev); + if (ret) { + dev_err(dev, "Failed to initialize mdiobus: %d\n", ret); + goto out; + } + + ret = ftgmac100_phy_init(dev); + if (ret) { + dev_err(dev, "Failed to initialize PHY: %d\n", ret); + goto out; + } + +out: + return ret; } static int ftgmac100_remove(struct udevice *dev) { + struct ftgmac100_data *priv = dev_get_priv(dev); + + free(priv->phydev); + mdio_unregister(priv->bus); + mdio_free(priv->bus); + return 0; }