From: Biwen Li Date: Mon, 6 May 2019 04:13:14 +0000 (+0800) Subject: layerscape: update patches-4.14 to LSDK 19.03 X-Git-Tag: v19.07.0-rc1~483 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=5159d71983e649a89568e46d9ff02731beedd571;p=oweals%2Fopenwrt.git layerscape: update patches-4.14 to LSDK 19.03 All patches of LSDK 19.03 were ported to Openwrt kernel. We still used an all-in-one patch for each IP/feature for OpenWrt. Below are the changes this patch introduced. - Updated original IP/feature patches to LSDK 19.03. - Added new IP/feature patches for eTSEC/PTP/TMU. - Squashed scattered patches into IP/feature patches. - Updated config-4.14 correspondingly. - Refreshed all patches. More info about LSDK and the kernel: - https://lsdk.github.io/components.html - https://source.codeaurora.org/external/qoriq/qoriq-components/linux Signed-off-by: Biwen Li Signed-off-by: Yangbo Lu --- diff --git a/target/linux/layerscape/armv7/config-4.14 b/target/linux/layerscape/armv7/config-4.14 old mode 100755 new mode 100644 index 1a6a83e892..5e13f11ea0 --- a/target/linux/layerscape/armv7/config-4.14 +++ b/target/linux/layerscape/armv7/config-4.14 @@ -73,6 +73,7 @@ CONFIG_ARM_TIMER_SP804=y CONFIG_ARM_UNWIND=y CONFIG_ARM_VIRT_EXT=y CONFIG_AT803X_PHY=y +# CONFIG_AT803X_PHY_SMART_EEE is not set CONFIG_ATAGS=y CONFIG_AUTOFS4_FS=y CONFIG_AUTO_ZRELADDR=y @@ -259,6 +260,7 @@ CONFIG_FSL_IFC=y # CONFIG_FSL_PPFE is not set CONFIG_FSL_PQ_MDIO=y # CONFIG_FSL_QDMA is not set +# CONFIG_FSL_QIXIS is not set # CONFIG_FSL_SDK_DPA is not set CONFIG_FSL_XGMAC_MDIO=y CONFIG_FS_MBCACHE=y @@ -279,6 +281,7 @@ CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_GENERIC_IO=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_MSI_IRQ=y @@ -393,6 +396,7 @@ CONFIG_IMX_DMA=y CONFIG_IMX_SDMA=y # CONFIG_IMX_WEIM is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_INPHI_PHY is not set CONFIG_INPUT=y # CONFIG_INPUT_MISC is not set CONFIG_IOMMU_HELPER=y @@ -430,6 +434,7 @@ CONFIG_MARVELL_PHY=y CONFIG_MCPM=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_BUS=y +# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set CONFIG_MDIO_DEVICE=y # CONFIG_MDIO_FSL_BACKPLANE is not set # CONFIG_MDIO_GPIO is not set @@ -537,6 +542,7 @@ CONFIG_PCIEASPM_DEFAULT=y CONFIG_PCIEPORTBUS=y CONFIG_PCIE_DW=y CONFIG_PCIE_DW_HOST=y +# CONFIG_PCIE_DW_PLAT_HOST is not set CONFIG_PCIE_PME=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_DOMAINS_GENERIC=y @@ -588,7 +594,7 @@ CONFIG_PSTORE_PMSG=y CONFIG_PSTORE_RAM=y CONFIG_PSTORE_ZLIB_COMPRESS=y CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_GIANFAR=y +CONFIG_PTP_1588_CLOCK_QORIQ=y CONFIG_QORIQ_CPUFREQ=y # CONFIG_QUICC_ENGINE is not set CONFIG_RAS=y @@ -681,6 +687,7 @@ CONFIG_SPI_CADENCE=y # CONFIG_SPI_FSL_QUADSPI is not set # CONFIG_SPI_IMX is not set CONFIG_SPI_MASTER=y +# CONFIG_SPI_NXP_FLEXSPI is not set CONFIG_SPI_SPIDEV=y CONFIG_SPI_XILINX=y CONFIG_SPMI=y diff --git a/target/linux/layerscape/armv8_64b/config-4.14 b/target/linux/layerscape/armv8_64b/config-4.14 index 1938b0eb1a..c981c0119e 100644 --- a/target/linux/layerscape/armv8_64b/config-4.14 +++ b/target/linux/layerscape/armv8_64b/config-4.14 @@ -116,7 +116,6 @@ CONFIG_BLK_SCSI_REQUEST=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_BOUNCE=y -CONFIG_BPF_JIT=y # CONFIG_BPF_SYSCALL is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y @@ -188,7 +187,6 @@ CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC is not set # CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y @@ -309,6 +307,7 @@ CONFIG_FSL_DPAA2_ETHSW=y CONFIG_FSL_DPAA2_EVB=y CONFIG_FSL_DPAA2_MAC=y # CONFIG_FSL_DPAA2_MAC_NETDEVS is not set +CONFIG_FSL_DPAA2_PTP_CLOCK=y # CONFIG_FSL_DPAA2_QDMA is not set # CONFIG_FSL_DPAA_1588 is not set CONFIG_FSL_DPAA_ADVANCED_DRIVERS=y @@ -321,7 +320,6 @@ CONFIG_FSL_DPAA_ETH_DEBUGFS=y # CONFIG_FSL_DPAA_ETH_JUMBO_FRAME is not set CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT=128 CONFIG_FSL_DPAA_ETH_REFILL_THRESHOLD=80 -CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE=y # CONFIG_FSL_DPAA_HOOKS is not set CONFIG_FSL_DPAA_INGRESS_CS_THRESHOLD=0x10000000 CONFIG_FSL_DPAA_OFFLINE_PORTS=y @@ -347,6 +345,7 @@ CONFIG_FSL_PPFE=y CONFIG_FSL_PPFE_UTIL_DISABLED=y # CONFIG_FSL_QBMAN_DEBUG is not set # CONFIG_FSL_QDMA is not set +CONFIG_FSL_QIXIS=y CONFIG_FSL_QMAN_CI_SCHED_CFG_BMAN_W=2 CONFIG_FSL_QMAN_CI_SCHED_CFG_RW_W=2 CONFIG_FSL_QMAN_CI_SCHED_CFG_SRCCIV=4 @@ -514,6 +513,7 @@ CONFIG_INET_DIAG=y # CONFIG_INET_RAW_DIAG is not set CONFIG_INET_TCP_DIAG=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPHI_PHY=y CONFIG_INPUT=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_KEYBOARD=y @@ -573,6 +573,7 @@ CONFIG_MDIO_BITBANG=y CONFIG_MDIO_BUS=y CONFIG_MDIO_BUS_MUX=y CONFIG_MDIO_BUS_MUX_MMIOREG=y +CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y CONFIG_MDIO_DEVICE=y # CONFIG_MDIO_FSL_BACKPLANE is not set # CONFIG_MDIO_GPIO is not set @@ -580,6 +581,7 @@ CONFIG_MEMORY=y CONFIG_MEMORY_BALLOON=y CONFIG_MEMORY_ISOLATION=y CONFIG_MEMTEST=y +CONFIG_MFD_CORE=y CONFIG_MFD_SYSCON=y # CONFIG_MFD_VEXPRESS_SYSREG is not set CONFIG_MICREL_PHY=y @@ -637,7 +639,11 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 # CONFIG_MTD_UBI_FASTMAP is not set # CONFIG_MTD_UBI_GLUEBI is not set CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MULTIPLEXER=y CONFIG_MUTEX_SPIN_ON_OWNER=y +# CONFIG_MUX_ADG792A is not set +# CONFIG_MUX_GPIO is not set +CONFIG_MUX_MMIO=y CONFIG_MV_XOR_V2=y CONFIG_NAMESPACES=y CONFIG_NEED_DMA_MAP_STATE=y @@ -694,6 +700,9 @@ CONFIG_PCIEASPM_DEFAULT=y CONFIG_PCIEPORTBUS=y CONFIG_PCIE_DW=y CONFIG_PCIE_DW_HOST=y +# CONFIG_PCIE_DW_PLAT_HOST is not set +CONFIG_PCIE_MOBIVEIL=y +CONFIG_PCIE_MOBIVEIL_HOST=y CONFIG_PCIE_PME=y CONFIG_PCI_ATS=y CONFIG_PCI_BUS_ADDR_T_64BIT=y @@ -706,6 +715,7 @@ CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_IOV=y CONFIG_PCI_LABEL=y CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_LAYERSCAPE_GEN4=y CONFIG_PCI_MSI=y CONFIG_PCI_MSI_IRQ_DOMAIN=y CONFIG_PERF_EVENTS=y @@ -738,8 +748,7 @@ CONFIG_PRINT_QUOTA_WARNING=y CONFIG_PROC_CHILDREN=y CONFIG_PROFILING=y CONFIG_PTP_1588_CLOCK=y -# CONFIG_PTP_1588_CLOCK_DPAA is not set -CONFIG_PTP_1588_CLOCK_DPAA2=y +CONFIG_PTP_1588_CLOCK_QORIQ=y CONFIG_QCOM_HIDMA=y CONFIG_QCOM_HIDMA_MGMT=y CONFIG_QCOM_QDF2400_ERRATUM_0065=y @@ -828,6 +837,7 @@ CONFIG_SPI=y CONFIG_SPI_FSL_DSPI=y CONFIG_SPI_FSL_QUADSPI=y CONFIG_SPI_MASTER=y +CONFIG_SPI_NXP_FLEXSPI=y CONFIG_SPI_PL022=y CONFIG_SPMI=y # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set diff --git a/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch b/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch index 7ab88b5e99..7974a5051a 100644 --- a/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch @@ -1,6 +1,6 @@ -From 0bafdb711c1a61fbe5bb5b4d4bb5e32425d95a72 Mon Sep 17 00:00:00 2001 -From: Biwen Li -Date: Fri, 16 Nov 2018 15:36:03 +0800 +From 2a1351617985ef47581de825ae1bbf1d42bf3200 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Mon, 6 May 2019 17:29:32 +0800 Subject: [PATCH] config: support layerscape MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 @@ -10,45 +10,65 @@ This is an integrated patch of config for layerscape Signed-off-by: Alison Wang Signed-off-by: Bharat Bhushan +Signed-off-by: Biwen Li +Signed-off-by: Bjorn Helgaas Signed-off-by: Bogdan Purcareata Signed-off-by: Calvin Johnson Signed-off-by: Camelia Groza Signed-off-by: Chenhui Zhao +Signed-off-by: Florin Chiculita Signed-off-by: Greg Kroah-Hartman Signed-off-by: Horia Geantă +Signed-off-by: Hou Zhiqiang Signed-off-by: Ioana Ciornei Signed-off-by: Ioana Radulescu Signed-off-by: Li Yang +Signed-off-by: Lorenzo Pieralisi Signed-off-by: Madalin Bucur +Signed-off-by: Pankaj Bansal Signed-off-by: Pankit Garg Signed-off-by: Prabhakar Kushwaha Signed-off-by: Ran Wang Signed-off-by: Razvan Stefanescu Signed-off-by: Shengzhou Liu +Signed-off-by: Subrahmanya Lingappa +Signed-off-by: Xiaowei Bao Signed-off-by: Yangbo Lu +Signed-off-by: Yogesh Gaur Signed-off-by: Zhang Ying-22455 -Signed-off-by: Zhao Qiang -Signed-off-by: Biwen Li +Signed-off-by: Zhao Qiang --- + drivers/Makefile | 2 ++ drivers/irqchip/Makefile | 1 + - drivers/net/ethernet/freescale/Kconfig | 14 ++++---- + drivers/net/ethernet/freescale/Kconfig | 14 +++++---- drivers/net/ethernet/freescale/Makefile | 3 ++ - drivers/ptp/Kconfig | 29 +++++++++++++++++ + drivers/ptp/Kconfig | 16 +++++----- drivers/soc/Kconfig | 1 + - drivers/soc/fsl/Kconfig | 11 +++++++ - drivers/soc/fsl/Kconfig.arm | 16 +++++++++ - drivers/soc/fsl/Makefile | 3 ++ + drivers/soc/fsl/Kconfig | 22 +++++++++++++ + drivers/soc/fsl/Kconfig.arm | 16 ++++++++++ + drivers/soc/fsl/Makefile | 5 +++ drivers/soc/fsl/layerscape/Kconfig | 10 ++++++ drivers/soc/fsl/layerscape/Makefile | 1 + drivers/staging/Kconfig | 4 +++ drivers/staging/Makefile | 2 ++ - drivers/staging/fsl-dpaa2/Kconfig | 43 ++++++++++++++++++++++++- + drivers/staging/fsl-dpaa2/Kconfig | 56 ++++++++++++++++++++++++++++++++- drivers/staging/fsl-dpaa2/Makefile | 4 +++ - 14 files changed, 135 insertions(+), 7 deletions(-) + 15 files changed, 142 insertions(+), 15 deletions(-) create mode 100644 drivers/soc/fsl/Kconfig.arm create mode 100644 drivers/soc/fsl/layerscape/Kconfig create mode 100644 drivers/soc/fsl/layerscape/Makefile +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -20,6 +20,8 @@ obj-$(CONFIG_PCI) += pci/ + obj-$(CONFIG_PCI_ENDPOINT) += pci/endpoint/ + # PCI dwc controller drivers + obj-y += pci/dwc/ ++# PCI mobiveil controller drivers ++obj-y += pci/mobiveil/ + + obj-$(CONFIG_PARISC) += parisc/ + obj-$(CONFIG_RAPIDIO) += rapidio/ --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -80,3 +80,4 @@ obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed @@ -106,42 +126,34 @@ Signed-off-by: Biwen Li obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/ --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig -@@ -55,6 +55,35 @@ config PTP_1588_CLOCK_GIANFAR +@@ -41,19 +41,19 @@ config PTP_1588_CLOCK_DTE To compile this driver as a module, choose M here: the module - will be called gianfar_ptp. + will be called ptp_dte. + +-config PTP_1588_CLOCK_GIANFAR +- tristate "Freescale eTSEC as PTP clock" +- depends on GIANFAR ++config PTP_1588_CLOCK_QORIQ ++ tristate "Freescale QorIQ 1588 timer as PTP clock" ++ depends on GIANFAR || FSL_DPAA_ETH || FSL_SDK_DPAA_ETH + depends on PTP_1588_CLOCK + default y + help +- This driver adds support for using the eTSEC as a PTP +- clock. This clock is only useful if your PTP programs are +- getting hardware time stamps on the PTP Ethernet packets +- using the SO_TIMESTAMPING API. ++ This driver adds support for using the Freescale QorIQ 1588 ++ timer as a PTP clock. This clock is only useful if your PTP ++ programs are getting hardware time stamps on the PTP Ethernet ++ packets using the SO_TIMESTAMPING API. + + To compile this driver as a module, choose M here: the module +- will be called gianfar_ptp. ++ will be called ptp_qoriq. -+config PTP_1588_CLOCK_DPAA -+ tristate "Freescale DPAA as PTP clock" -+ depends on FSL_SDK_DPAA_ETH -+ select PTP_1588_CLOCK -+ select FSL_DPAA_TS -+ default n -+ help -+ This driver adds support for using the DPAA 1588 timer module -+ as a PTP clock. This clock is only useful if your PTP programs are -+ getting hardware time stamps on the PTP Ethernet packets -+ using the SO_TIMESTAMPING API. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called dpaa_ptp. -+ -+config PTP_1588_CLOCK_DPAA2 -+ tristate "Freescale DPAA2 as PTP clock" -+ depends on FSL_DPAA2_ETH -+ select PTP_1588_CLOCK -+ default y -+ help -+ This driver adds support for using the DPAA2 1588 timer module -+ as a PTP clock. This clock is only useful if your PTP programs are -+ getting hardware time stamps on the PTP Ethernet packets -+ using the SO_TIMESTAMPING API. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called dpaa2-rtc. -+ config PTP_1588_CLOCK_IXP46X tristate "Intel IXP46x as PTP clock" - depends on IXP4XX_ETH --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -5,6 +5,7 @@ source "drivers/soc/amlogic/Kconfig" @@ -154,11 +166,22 @@ Signed-off-by: Biwen Li source "drivers/soc/qcom/Kconfig" --- a/drivers/soc/fsl/Kconfig +++ b/drivers/soc/fsl/Kconfig -@@ -16,3 +16,14 @@ config FSL_GUTS +@@ -16,3 +16,25 @@ config FSL_GUTS Initially only reading SVR and registering soc device are supported. Other guts accesses, such as reading RCW, should eventually be moved into this driver as well. + ++config FSL_QIXIS ++ tristate "QIXIS system controller driver" ++ depends on OF ++ select REGMAP_I2C ++ select REGMAP_MMIO ++ select MFD_CORE ++ default n ++ help ++ Say y here to enable QIXIS system controller api. The qixis driver ++ provides FPGA functions to control system. ++ +config FSL_SLEEP_FSM + bool + help @@ -190,11 +213,14 @@ Signed-off-by: Biwen Li +endif --- a/drivers/soc/fsl/Makefile +++ b/drivers/soc/fsl/Makefile -@@ -6,3 +6,6 @@ obj-$(CONFIG_FSL_DPAA) + +@@ -5,4 +5,9 @@ + obj-$(CONFIG_FSL_DPAA) += qbman/ obj-$(CONFIG_QUICC_ENGINE) += qe/ obj-$(CONFIG_CPM) += qe/ ++obj-$(CONFIG_FSL_QIXIS) += qixis_ctrl.o obj-$(CONFIG_FSL_GUTS) += guts.o +obj-$(CONFIG_FSL_LS2_CONSOLE) += ls2-console/ ++obj-$(CONFIG_SUSPEND) += rcpm.o +obj-$(CONFIG_LS_SOC_DRIVERS) += layerscape/ +obj-$(CONFIG_FSL_SLEEP_FSM) += sleep_fsm.o --- /dev/null @@ -244,7 +270,7 @@ Signed-off-by: Biwen Li ---help--- Build drivers for Freescale DataPath Acceleration Architecture (DPAA2) family of SoCs. -@@ -16,3 +16,44 @@ config FSL_DPAA2_ETH +@@ -16,3 +16,57 @@ config FSL_DPAA2_ETH ---help--- Ethernet driver for Freescale DPAA2 SoCs, using the Freescale MC bus driver @@ -277,6 +303,19 @@ Signed-off-by: Biwen Li + (PFC) in the driver. + + If unsure, say N. ++ ++config FSL_DPAA2_PTP_CLOCK ++ tristate "Freescale DPAA2 as PTP clock" ++ select PTP_1588_CLOCK ++ default y ++ help ++ This driver adds support for using the DPAA2 1588 timer module ++ as a PTP clock. This clock is only useful if your PTP programs are ++ getting hardware time stamps on the PTP Ethernet packets ++ using the SO_TIMESTAMPING API. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called dpaa2-rtc. +endif + +source "drivers/staging/fsl-dpaa2/mac/Kconfig" @@ -297,5 +336,5 @@ Signed-off-by: Biwen Li obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/ +obj-$(CONFIG_FSL_DPAA2_MAC) += mac/ +obj-$(CONFIG_FSL_DPAA2_EVB) += evb/ -+obj-$(CONFIG_PTP_1588_CLOCK_DPAA2) += rtc/ ++obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += rtc/ +obj-$(CONFIG_FSL_DPAA2_ETHSW) += ethsw/ diff --git a/target/linux/layerscape/patches-4.14/202-core-linux-support-layerscape.patch b/target/linux/layerscape/patches-4.14/202-core-linux-support-layerscape.patch index e8de78413b..46650d17fa 100644 --- a/target/linux/layerscape/patches-4.14/202-core-linux-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/202-core-linux-support-layerscape.patch @@ -1,54 +1,301 @@ -From 74243154052af635ee9ce9d07aab273ce219c855 Mon Sep 17 00:00:00 2001 -From: Biwen Li -Date: Thu, 13 Dec 2018 13:23:52 +0800 +From d2ef9f2f6d16d34d7eee74cb8efd269341fec5a1 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Mon, 6 May 2019 16:54:17 +0800 Subject: [PATCH] core-linux: support layerscape -This is an integrated patch of core-linux for layerscape. +This is an integrated patch of core-linux for layerscape +Signed-off-by: Aaron Lu Signed-off-by: Abhijit Ayarekar Signed-off-by: Amrita Kumari +Signed-off-by: Andrew Morton Signed-off-by: Ashish Kumar +Signed-off-by: Biwen Li Signed-off-by: Camelia Groza Signed-off-by: Christoph Hellwig Signed-off-by: David Ahern Signed-off-by: David S. Miller +Signed-off-by: Greg Kroah-Hartman Signed-off-by: Guanhua Gao +Signed-off-by: Ioana Ciornei Signed-off-by: Jiri Pirko Signed-off-by: Joel Fernandes +Signed-off-by: Laurentiu Tudor +Signed-off-by: Linus Torvalds Signed-off-by: Li Yang -Signed-off-by: Madalin Bucur +Signed-off-by: Lukas Wunner Signed-off-by: Madalin Bucur +Signed-off-by: Mark Brown Signed-off-by: Nikhil Badola Signed-off-by: Nipun Gupta +Signed-off-by: Pankaj Bansal +Signed-off-by: pascal paillet +Signed-off-by: Rafael J. Wysocki Signed-off-by: Ramneek Mehresh Signed-off-by: Robin Murphy Signed-off-by: Suresh Gupta +Signed-off-by: Vivek Gautam Signed-off-by: Yangbo Lu -Signed-off-by: yinbo.zhu -Signed-off-by: Biwen Li --- - drivers/base/dma-mapping.c | 7 ++ - drivers/net/bonding/bond_main.c | 5 +- - drivers/net/bonding/bond_options.c | 2 +- - drivers/net/team/team.c | 3 +- - drivers/net/vrf.c | 3 +- - drivers/of/device.c | 13 +++- - drivers/soc/fsl/guts.c | 3 + - include/linux/fsl_devices.h | 2 + - include/linux/netdevice.h | 13 +++- - include/linux/skbuff.h | 2 + - include/net/bonding.h | 3 +- - net/batman-adv/soft-interface.c | 3 +- - net/bridge/br_device.c | 3 +- - net/core/dev.c | 81 ++++++++++++++--------- - net/core/rtnetlink.c | 10 +-- - net/core/skbuff.c | 29 +++++++- - samples/bpf/Makefile | 12 +++- - samples/bpf/map_perf_test_kern.c | 2 +- - samples/bpf/map_perf_test_user.c | 2 +- - tools/testing/selftests/bpf/bpf_helpers.h | 56 ++++++++++++++-- - 20 files changed, 193 insertions(+), 61 deletions(-) + drivers/base/core.c | 122 ++++++++++++++++++++++++++---- + drivers/base/dma-mapping.c | 7 ++ + drivers/gpu/ipu-v3/ipu-pre.c | 3 +- + drivers/gpu/ipu-v3/ipu-prg.c | 3 +- + drivers/iommu/dma-iommu.c | 3 + + drivers/mux/Kconfig | 12 +-- + drivers/mux/mmio.c | 6 +- + drivers/of/device.c | 14 +++- + drivers/soc/imx/gpc.c | 2 +- + include/linux/device.h | 20 +++-- + include/linux/fsl_devices.h | 2 + + include/linux/netdevice.h | 10 ++- + include/linux/skbuff.h | 2 + + lib/dma-noop.c | 19 +++++ + mm/page_alloc.c | 10 ++- + net/core/dev.c | 81 ++++++++++++-------- + net/core/skbuff.c | 29 ++++++- + samples/bpf/Makefile | 12 ++- + samples/bpf/map_perf_test_kern.c | 2 +- + samples/bpf/map_perf_test_user.c | 2 +- + tools/testing/selftests/bpf/bpf_helpers.h | 56 ++++++++++++-- + 21 files changed, 337 insertions(+), 80 deletions(-) +--- a/drivers/base/core.c ++++ b/drivers/base/core.c +@@ -161,10 +161,10 @@ static int device_reorder_to_tail(struct + * of the link. If DL_FLAG_PM_RUNTIME is not set, DL_FLAG_RPM_ACTIVE will be + * ignored. + * +- * If the DL_FLAG_AUTOREMOVE is set, the link will be removed automatically +- * when the consumer device driver unbinds from it. The combination of both +- * DL_FLAG_AUTOREMOVE and DL_FLAG_STATELESS set is invalid and will cause NULL +- * to be returned. ++ * If the DL_FLAG_AUTOREMOVE_CONSUMER is set, the link will be removed ++ * automatically when the consumer device driver unbinds from it. ++ * The combination of both DL_FLAG_AUTOREMOVE_CONSUMER and DL_FLAG_STATELESS ++ * set is invalid and will cause NULL to be returned. + * + * A side effect of the link creation is re-ordering of dpm_list and the + * devices_kset list by moving the consumer device and all devices depending +@@ -181,7 +181,8 @@ struct device_link *device_link_add(stru + struct device_link *link; + + if (!consumer || !supplier || +- ((flags & DL_FLAG_STATELESS) && (flags & DL_FLAG_AUTOREMOVE))) ++ ((flags & DL_FLAG_STATELESS) && ++ (flags & DL_FLAG_AUTOREMOVE_CONSUMER))) + return NULL; + + device_links_write_lock(); +@@ -199,8 +200,10 @@ struct device_link *device_link_add(stru + } + + list_for_each_entry(link, &supplier->links.consumers, s_node) +- if (link->consumer == consumer) ++ if (link->consumer == consumer) { ++ kref_get(&link->kref); + goto out; ++ } + + link = kzalloc(sizeof(*link), GFP_KERNEL); + if (!link) +@@ -232,6 +235,7 @@ struct device_link *device_link_add(stru + link->consumer = consumer; + INIT_LIST_HEAD(&link->c_node); + link->flags = flags; ++ kref_init(&link->kref); + + /* Determine the initial link state. */ + if (flags & DL_FLAG_STATELESS) { +@@ -302,8 +306,10 @@ static void __device_link_free_srcu(stru + device_link_free(container_of(rhead, struct device_link, rcu_head)); + } + +-static void __device_link_del(struct device_link *link) ++static void __device_link_del(struct kref *kref) + { ++ struct device_link *link = container_of(kref, struct device_link, kref); ++ + dev_info(link->consumer, "Dropping the link to %s\n", + dev_name(link->supplier)); + +@@ -315,8 +321,10 @@ static void __device_link_del(struct dev + call_srcu(&device_links_srcu, &link->rcu_head, __device_link_free_srcu); + } + #else /* !CONFIG_SRCU */ +-static void __device_link_del(struct device_link *link) ++static void __device_link_del(struct kref *kref) + { ++ struct device_link *link = container_of(kref, struct device_link, kref); ++ + dev_info(link->consumer, "Dropping the link to %s\n", + dev_name(link->supplier)); + +@@ -334,18 +342,50 @@ static void __device_link_del(struct dev + * @link: Device link to delete. + * + * The caller must ensure proper synchronization of this function with runtime +- * PM. ++ * PM. If the link was added multiple times, it needs to be deleted as often. ++ * Care is required for hotplugged devices: Their links are purged on removal ++ * and calling device_link_del() is then no longer allowed. + */ + void device_link_del(struct device_link *link) + { + device_links_write_lock(); + device_pm_lock(); +- __device_link_del(link); ++ kref_put(&link->kref, __device_link_del); + device_pm_unlock(); + device_links_write_unlock(); + } + EXPORT_SYMBOL_GPL(device_link_del); + ++/** ++ * device_link_remove - remove a link between two devices. ++ * @consumer: Consumer end of the link. ++ * @supplier: Supplier end of the link. ++ * ++ * The caller must ensure proper synchronization of this function with runtime ++ * PM. ++ */ ++void device_link_remove(void *consumer, struct device *supplier) ++{ ++ struct device_link *link; ++ ++ if (WARN_ON(consumer == supplier)) ++ return; ++ ++ device_links_write_lock(); ++ device_pm_lock(); ++ ++ list_for_each_entry(link, &supplier->links.consumers, s_node) { ++ if (link->consumer == consumer) { ++ kref_put(&link->kref, __device_link_del); ++ break; ++ } ++ } ++ ++ device_pm_unlock(); ++ device_links_write_unlock(); ++} ++EXPORT_SYMBOL_GPL(device_link_remove); ++ + static void device_links_missing_supplier(struct device *dev) + { + struct device_link *link; +@@ -453,8 +493,8 @@ static void __device_links_no_driver(str + if (link->flags & DL_FLAG_STATELESS) + continue; + +- if (link->flags & DL_FLAG_AUTOREMOVE) +- __device_link_del(link); ++ if (link->flags & DL_FLAG_AUTOREMOVE_CONSUMER) ++ kref_put(&link->kref, __device_link_del); + else if (link->status != DL_STATE_SUPPLIER_UNBIND) + WRITE_ONCE(link->status, DL_STATE_AVAILABLE); + } +@@ -489,8 +529,18 @@ void device_links_driver_cleanup(struct + if (link->flags & DL_FLAG_STATELESS) + continue; + +- WARN_ON(link->flags & DL_FLAG_AUTOREMOVE); ++ WARN_ON(link->flags & DL_FLAG_AUTOREMOVE_CONSUMER); + WARN_ON(link->status != DL_STATE_SUPPLIER_UNBIND); ++ ++ /* ++ * autoremove the links between this @dev and its consumer ++ * devices that are not active, i.e. where the link state ++ * has moved to DL_STATE_SUPPLIER_UNBIND. ++ */ ++ if (link->status == DL_STATE_SUPPLIER_UNBIND && ++ link->flags & DL_FLAG_AUTOREMOVE_SUPPLIER) ++ kref_put(&link->kref, __device_link_del); ++ + WRITE_ONCE(link->status, DL_STATE_DORMANT); + } + +@@ -607,13 +657,13 @@ static void device_links_purge(struct de + + list_for_each_entry_safe_reverse(link, ln, &dev->links.suppliers, c_node) { + WARN_ON(link->status == DL_STATE_ACTIVE); +- __device_link_del(link); ++ __device_link_del(&link->kref); + } + + list_for_each_entry_safe_reverse(link, ln, &dev->links.consumers, s_node) { + WARN_ON(link->status != DL_STATE_DORMANT && + link->status != DL_STATE_NONE); +- __device_link_del(link); ++ __device_link_del(&link->kref); + } + + device_links_write_unlock(); +@@ -1035,6 +1085,34 @@ static ssize_t online_store(struct devic + } + static DEVICE_ATTR_RW(online); + ++static ssize_t suppliers_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct device_link *link; ++ size_t count = 0; ++ ++ list_for_each_entry(link, &dev->links.suppliers, c_node) ++ count += scnprintf(buf + count, PAGE_SIZE - count, "%s\n", ++ dev_name(link->supplier)); ++ ++ return count; ++} ++static DEVICE_ATTR_RO(suppliers); ++ ++static ssize_t consumers_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct device_link *link; ++ size_t count = 0; ++ ++ list_for_each_entry(link, &dev->links.consumers, s_node) ++ count += scnprintf(buf + count, PAGE_SIZE - count, "%s\n", ++ dev_name(link->consumer)); ++ ++ return count; ++} ++static DEVICE_ATTR_RO(consumers); ++ + int device_add_groups(struct device *dev, const struct attribute_group **groups) + { + return sysfs_create_groups(&dev->kobj, groups); +@@ -1206,8 +1284,20 @@ static int device_add_attrs(struct devic + goto err_remove_dev_groups; + } + ++ error = device_create_file(dev, &dev_attr_suppliers); ++ if (error) ++ goto err_remove_online; ++ ++ error = device_create_file(dev, &dev_attr_consumers); ++ if (error) ++ goto err_remove_suppliers; ++ + return 0; + ++ err_remove_suppliers: ++ device_remove_file(dev, &dev_attr_suppliers); ++ err_remove_online: ++ device_remove_file(dev, &dev_attr_online); + err_remove_dev_groups: + device_remove_groups(dev, dev->groups); + err_remove_type_groups: +@@ -1225,6 +1315,8 @@ static void device_remove_attrs(struct d + struct class *class = dev->class; + const struct device_type *type = dev->type; + ++ device_remove_file(dev, &dev_attr_consumers); ++ device_remove_file(dev, &dev_attr_suppliers); + device_remove_file(dev, &dev_attr_online); + device_remove_groups(dev, dev->groups); + --- a/drivers/base/dma-mapping.c +++ b/drivers/base/dma-mapping.c @@ -335,6 +335,7 @@ void dma_common_free_remap(void *cpu_add @@ -72,62 +319,87 @@ Signed-off-by: Biwen Li if (dma_dev->of_node) { ret = of_dma_configure(dev, dma_dev->of_node); } else if (has_acpi_companion(dma_dev)) { ---- a/drivers/net/bonding/bond_main.c -+++ b/drivers/net/bonding/bond_main.c -@@ -1330,7 +1330,8 @@ void bond_lower_state_changed(struct sla - } - - /* enslave device to bond device */ --int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) -+int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, -+ struct netlink_ext_ack *extack) - { - struct bonding *bond = netdev_priv(bond_dev); - const struct net_device_ops *slave_ops = slave_dev->netdev_ops; -@@ -3506,7 +3507,7 @@ static int bond_do_ioctl(struct net_devi - switch (cmd) { - case BOND_ENSLAVE_OLD: - case SIOCBONDENSLAVE: -- res = bond_enslave(bond_dev, slave_dev); -+ res = bond_enslave(bond_dev, slave_dev, NULL); - break; - case BOND_RELEASE_OLD: - case SIOCBONDRELEASE: ---- a/drivers/net/bonding/bond_options.c -+++ b/drivers/net/bonding/bond_options.c -@@ -1382,7 +1382,7 @@ static int bond_option_slaves_set(struct - switch (command[0]) { - case '+': - netdev_dbg(bond->dev, "Adding slave %s\n", dev->name); -- ret = bond_enslave(bond->dev, dev); -+ ret = bond_enslave(bond->dev, dev, NULL); - break; - - case '-': ---- a/drivers/net/team/team.c -+++ b/drivers/net/team/team.c -@@ -1953,7 +1953,8 @@ static int team_netpoll_setup(struct net - } - #endif - --static int team_add_slave(struct net_device *dev, struct net_device *port_dev) -+static int team_add_slave(struct net_device *dev, struct net_device *port_dev, -+ struct netlink_ext_ack *extack) - { - struct team *team = netdev_priv(dev); - int err; ---- a/drivers/net/vrf.c -+++ b/drivers/net/vrf.c -@@ -791,7 +791,8 @@ err: - return ret; - } - --static int vrf_add_slave(struct net_device *dev, struct net_device *port_dev) -+static int vrf_add_slave(struct net_device *dev, struct net_device *port_dev, -+ struct netlink_ext_ack *extack) - { - if (netif_is_l3_master(port_dev) || netif_is_l3_slave(port_dev)) - return -EINVAL; +--- a/drivers/gpu/ipu-v3/ipu-pre.c ++++ b/drivers/gpu/ipu-v3/ipu-pre.c +@@ -124,7 +124,8 @@ ipu_pre_lookup_by_phandle(struct device + list_for_each_entry(pre, &ipu_pre_list, list) { + if (pre_node == pre->dev->of_node) { + mutex_unlock(&ipu_pre_list_mutex); +- device_link_add(dev, pre->dev, DL_FLAG_AUTOREMOVE); ++ device_link_add(dev, pre->dev, ++ DL_FLAG_AUTOREMOVE_CONSUMER); + of_node_put(pre_node); + return pre; + } +--- a/drivers/gpu/ipu-v3/ipu-prg.c ++++ b/drivers/gpu/ipu-v3/ipu-prg.c +@@ -99,7 +99,8 @@ ipu_prg_lookup_by_phandle(struct device + list_for_each_entry(prg, &ipu_prg_list, list) { + if (prg_node == prg->dev->of_node) { + mutex_unlock(&ipu_prg_list_mutex); +- device_link_add(dev, prg->dev, DL_FLAG_AUTOREMOVE); ++ device_link_add(dev, prg->dev, ++ DL_FLAG_AUTOREMOVE_CONSUMER); + prg->id = ipu_id; + of_node_put(prg_node); + return prg; +--- a/drivers/iommu/dma-iommu.c ++++ b/drivers/iommu/dma-iommu.c +@@ -381,6 +381,9 @@ static dma_addr_t iommu_dma_alloc_iova(s + if (iova_len < (1 << (IOVA_RANGE_CACHE_MAX_SIZE - 1))) + iova_len = roundup_pow_of_two(iova_len); + ++ if (dev->bus_dma_mask) ++ dma_limit &= dev->bus_dma_mask; ++ + if (domain->geometry.force_aperture) + dma_limit = min(dma_limit, domain->geometry.aperture_end); + +--- a/drivers/mux/Kconfig ++++ b/drivers/mux/Kconfig +@@ -35,14 +35,14 @@ config MUX_GPIO + be called mux-gpio. + + config MUX_MMIO +- tristate "MMIO register bitfield-controlled Multiplexer" +- depends on (OF && MFD_SYSCON) || COMPILE_TEST ++ tristate "MMIO/Regmap register bitfield-controlled Multiplexer" ++ depends on OF || COMPILE_TEST + help +- MMIO register bitfield-controlled Multiplexer controller. ++ MMIO/Regmap register bitfield-controlled Multiplexer controller. + +- The driver builds multiplexer controllers for bitfields in a syscon +- register. For N bit wide bitfields, there will be 2^N possible +- multiplexer states. ++ The driver builds multiplexer controllers for bitfields in either ++ a syscon register or a driver regmap register. For N bit wide ++ bitfields, there will be 2^N possible multiplexer states. + + To compile the driver as a module, choose M here: the module will + be called mux-mmio. +--- a/drivers/mux/mmio.c ++++ b/drivers/mux/mmio.c +@@ -31,6 +31,7 @@ static const struct mux_control_ops mux_ + + static const struct of_device_id mux_mmio_dt_ids[] = { + { .compatible = "mmio-mux", }, ++ { .compatible = "reg-mux", }, + { /* sentinel */ } + }; + MODULE_DEVICE_TABLE(of, mux_mmio_dt_ids); +@@ -46,7 +47,10 @@ static int mux_mmio_probe(struct platfor + int ret; + int i; + +- regmap = syscon_node_to_regmap(np->parent); ++ if (of_device_is_compatible(np, "mmio-mux")) ++ regmap = syscon_node_to_regmap(np->parent); ++ else ++ regmap = dev_get_regmap(dev->parent, NULL) ?: ERR_PTR(-ENODEV); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + dev_err(dev, "failed to get regmap: %d\n", ret); --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -15,6 +15,9 @@ @@ -150,7 +422,11 @@ Signed-off-by: Biwen Li dev->bus != &platform_bus_type) return ret == -ENODEV ? 0 : ret; -@@ -155,7 +161,12 @@ int of_dma_configure(struct device *dev, +@@ -152,10 +158,16 @@ int of_dma_configure(struct device *dev, + * set by the driver. + */ + mask = DMA_BIT_MASK(ilog2(dma_addr + size - 1) + 1); ++ dev->bus_dma_mask = mask; dev->coherent_dma_mask &= mask; *dev->dma_mask &= mask; @@ -164,18 +440,91 @@ Signed-off-by: Biwen Li dev_dbg(dev, "device is%sdma coherent\n", coherent ? " " : " not "); ---- a/drivers/soc/fsl/guts.c -+++ b/drivers/soc/fsl/guts.c -@@ -213,6 +213,9 @@ static const struct of_device_id fsl_gut - { .compatible = "fsl,ls1021a-dcfg", }, - { .compatible = "fsl,ls1043a-dcfg", }, - { .compatible = "fsl,ls2080a-dcfg", }, -+ { .compatible = "fsl,ls1088a-dcfg", }, -+ { .compatible = "fsl,ls1012a-dcfg", }, -+ { .compatible = "fsl,ls1046a-dcfg", }, - {} - }; - MODULE_DEVICE_TABLE(of, fsl_guts_of_match); +--- a/drivers/soc/imx/gpc.c ++++ b/drivers/soc/imx/gpc.c +@@ -209,7 +209,7 @@ static int imx_pgc_power_domain_probe(st + goto genpd_err; + } + +- device_link_add(dev, dev->parent, DL_FLAG_AUTOREMOVE); ++ device_link_add(dev, dev->parent, DL_FLAG_AUTOREMOVE_CONSUMER); + + return 0; + +--- a/include/linux/device.h ++++ b/include/linux/device.h +@@ -55,6 +55,8 @@ struct bus_attribute { + struct bus_attribute bus_attr_##_name = __ATTR_RW(_name) + #define BUS_ATTR_RO(_name) \ + struct bus_attribute bus_attr_##_name = __ATTR_RO(_name) ++#define BUS_ATTR_WO(_name) \ ++ struct bus_attribute bus_attr_##_name = __ATTR_WO(_name) + + extern int __must_check bus_create_file(struct bus_type *, + struct bus_attribute *); +@@ -750,14 +752,16 @@ enum device_link_state { + * Device link flags. + * + * STATELESS: The core won't track the presence of supplier/consumer drivers. +- * AUTOREMOVE: Remove this link automatically on consumer driver unbind. ++ * AUTOREMOVE_CONSUMER: Remove the link automatically on consumer driver unbind. + * PM_RUNTIME: If set, the runtime PM framework will use this link. + * RPM_ACTIVE: Run pm_runtime_get_sync() on the supplier during link creation. ++ * AUTOREMOVE_SUPPLIER: Remove the link automatically on supplier driver unbind. + */ +-#define DL_FLAG_STATELESS BIT(0) +-#define DL_FLAG_AUTOREMOVE BIT(1) +-#define DL_FLAG_PM_RUNTIME BIT(2) +-#define DL_FLAG_RPM_ACTIVE BIT(3) ++#define DL_FLAG_STATELESS BIT(0) ++#define DL_FLAG_AUTOREMOVE_CONSUMER BIT(1) ++#define DL_FLAG_PM_RUNTIME BIT(2) ++#define DL_FLAG_RPM_ACTIVE BIT(3) ++#define DL_FLAG_AUTOREMOVE_SUPPLIER BIT(4) + + /** + * struct device_link - Device link representation. +@@ -768,6 +772,7 @@ enum device_link_state { + * @status: The state of the link (with respect to the presence of drivers). + * @flags: Link flags. + * @rpm_active: Whether or not the consumer device is runtime-PM-active. ++ * @kref: Count repeated addition of the same link. + * @rcu_head: An RCU head to use for deferred execution of SRCU callbacks. + */ + struct device_link { +@@ -778,6 +783,7 @@ struct device_link { + enum device_link_state status; + u32 flags; + bool rpm_active; ++ struct kref kref; + #ifdef CONFIG_SRCU + struct rcu_head rcu_head; + #endif +@@ -850,6 +856,8 @@ struct dev_links_info { + * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all + * hardware supports 64-bit addresses for consistent allocations + * such descriptors. ++ * @bus_dma_mask: Mask of an upstream bridge or bus which imposes a smaller DMA ++ * limit than the device itself supports. + * @dma_pfn_offset: offset of DMA memory range relatively of RAM + * @dma_parms: A low level driver may set these to teach IOMMU code about + * segment limitations. +@@ -929,6 +937,7 @@ struct device { + not all hardware supports + 64 bit addresses for consistent + allocations such descriptors. */ ++ u64 bus_dma_mask; /* upstream dma_mask constraint */ + unsigned long dma_pfn_offset; + + struct device_dma_parameters *dma_parms; +@@ -1267,6 +1276,7 @@ extern const char *dev_driver_string(con + struct device_link *device_link_add(struct device *consumer, + struct device *supplier, u32 flags); + void device_link_del(struct device_link *link); ++void device_link_remove(void *consumer, struct device *supplier); + + #ifdef CONFIG_PRINTK + --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -99,7 +99,9 @@ struct fsl_usb2_platform_data { @@ -190,17 +539,7 @@ Signed-off-by: Biwen Li --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h -@@ -1260,7 +1260,8 @@ struct net_device_ops { - u32 flow_id); - #endif - int (*ndo_add_slave)(struct net_device *dev, -- struct net_device *slave_dev); -+ struct net_device *slave_dev, -+ struct netlink_ext_ack *extack); - int (*ndo_del_slave)(struct net_device *dev, - struct net_device *slave_dev); - netdev_features_t (*ndo_fix_features)(struct net_device *dev, -@@ -2344,7 +2345,8 @@ int register_netdevice_notifier(struct n +@@ -2344,7 +2344,8 @@ int register_netdevice_notifier(struct n int unregister_netdevice_notifier(struct notifier_block *nb); struct netdev_notifier_info { @@ -210,7 +549,7 @@ Signed-off-by: Biwen Li }; struct netdev_notifier_info_ext { -@@ -2376,6 +2378,7 @@ static inline void netdev_notifier_info_ +@@ -2376,6 +2377,7 @@ static inline void netdev_notifier_info_ struct net_device *dev) { info->dev = dev; @@ -218,7 +557,7 @@ Signed-off-by: Biwen Li } static inline struct net_device * -@@ -2384,6 +2387,12 @@ netdev_notifier_info_to_dev(const struct +@@ -2384,6 +2386,12 @@ netdev_notifier_info_to_dev(const struct return info->dev; } @@ -249,42 +588,58 @@ Signed-off-by: Biwen Li int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len); __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset, u8 *to, int len, __wsum csum); ---- a/include/net/bonding.h -+++ b/include/net/bonding.h -@@ -592,7 +592,8 @@ void bond_destroy_sysfs(struct bond_net - void bond_prepare_sysfs_group(struct bonding *bond); - int bond_sysfs_slave_add(struct slave *slave); - void bond_sysfs_slave_del(struct slave *slave); --int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev); -+int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, -+ struct netlink_ext_ack *extack); - int bond_release(struct net_device *bond_dev, struct net_device *slave_dev); - u32 bond_xmit_hash(struct bonding *bond, struct sk_buff *skb); - int bond_set_carrier(struct bonding *bond); ---- a/net/batman-adv/soft-interface.c -+++ b/net/batman-adv/soft-interface.c -@@ -876,7 +876,8 @@ free_bat_counters: - * Return: 0 if successful or error otherwise. - */ - static int batadv_softif_slave_add(struct net_device *dev, -- struct net_device *slave_dev) -+ struct net_device *slave_dev, -+ struct netlink_ext_ack *extack) - { - struct batadv_hard_iface *hard_iface; - struct net *net = dev_net(dev); ---- a/net/bridge/br_device.c -+++ b/net/bridge/br_device.c -@@ -324,7 +324,8 @@ void br_netpoll_disable(struct net_bridg - - #endif +--- a/lib/dma-noop.c ++++ b/lib/dma-noop.c +@@ -58,11 +58,30 @@ static int dma_noop_map_sg(struct device + return nents; + } --static int br_add_slave(struct net_device *dev, struct net_device *slave_dev) -+static int br_add_slave(struct net_device *dev, struct net_device *slave_dev, -+ struct netlink_ext_ack *extack) ++static int dma_noop_supported(struct device *dev, u64 mask) ++{ ++#ifdef CONFIG_ZONE_DMA ++ if (mask < DMA_BIT_MASK(ARCH_ZONE_DMA_BITS)) ++ return 0; ++#else ++ /* ++ * Because 32-bit DMA masks are so common we expect every architecture ++ * to be able to satisfy them - either by not supporting more physical ++ * memory, or by providing a ZONE_DMA32. If neither is the case, the ++ * architecture needs to use an IOMMU instead of the direct mapping. ++ */ ++ if (dev->bus_dma_mask && mask > dev->bus_dma_mask) ++ return 0; ++#endif ++ return 1; ++} ++ + const struct dma_map_ops dma_noop_ops = { + .alloc = dma_noop_alloc, + .free = dma_noop_free, + .map_page = dma_noop_map_page, + .map_sg = dma_noop_map_sg, ++ dma_supported = dma_noop_supported + }; + EXPORT_SYMBOL(dma_noop_ops); +--- a/mm/page_alloc.c ++++ b/mm/page_alloc.c +@@ -4366,8 +4366,14 @@ void page_frag_free(void *addr) { - struct net_bridge *br = netdev_priv(dev); + struct page *page = virt_to_head_page(addr); + +- if (unlikely(put_page_testzero(page))) +- __free_pages_ok(page, compound_order(page)); ++ if (unlikely(put_page_testzero(page))) { ++ unsigned int order = compound_order(page); ++ ++ if (order == 0) /* Via pcp? */ ++ free_hot_cold_page(page, false); ++ else ++ __free_pages_ok(page, order); ++ } + } + EXPORT_SYMBOL(page_frag_free); + --- a/net/core/dev.c +++ b/net/core/dev.c @@ -162,7 +162,6 @@ static struct list_head offload_base __r @@ -480,46 +835,6 @@ Signed-off-by: Biwen Li } } ---- a/net/core/rtnetlink.c -+++ b/net/core/rtnetlink.c -@@ -1912,7 +1912,8 @@ static int do_setvfinfo(struct net_devic - return err; - } - --static int do_set_master(struct net_device *dev, int ifindex) -+static int do_set_master(struct net_device *dev, int ifindex, -+ struct netlink_ext_ack *extack) - { - struct net_device *upper_dev = netdev_master_upper_dev_get(dev); - const struct net_device_ops *ops; -@@ -1937,7 +1938,7 @@ static int do_set_master(struct net_devi - return -EINVAL; - ops = upper_dev->netdev_ops; - if (ops->ndo_add_slave) { -- err = ops->ndo_add_slave(upper_dev, dev); -+ err = ops->ndo_add_slave(upper_dev, dev, extack); - if (err) - return err; - } else { -@@ -2074,7 +2075,7 @@ static int do_setlink(const struct sk_bu - } - - if (tb[IFLA_MASTER]) { -- err = do_set_master(dev, nla_get_u32(tb[IFLA_MASTER])); -+ err = do_set_master(dev, nla_get_u32(tb[IFLA_MASTER]), extack); - if (err) - goto errout; - status |= DO_SETLINK_MODIFIED; -@@ -2723,7 +2724,8 @@ replay: - goto out_unregister; - } - if (tb[IFLA_MASTER]) { -- err = do_set_master(dev, nla_get_u32(tb[IFLA_MASTER])); -+ err = do_set_master(dev, nla_get_u32(tb[IFLA_MASTER]), -+ extack); - if (err) - goto out_unregister; - } --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -803,6 +803,32 @@ void napi_consume_skb(struct sk_buff *sk diff --git a/target/linux/layerscape/patches-4.14/301-arch-support-layerscape.patch b/target/linux/layerscape/patches-4.14/301-arch-support-layerscape.patch index 2fa6e4797e..484ec068d8 100644 --- a/target/linux/layerscape/patches-4.14/301-arch-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/301-arch-support-layerscape.patch @@ -1,12 +1,17 @@ -From 6eeff55fd4756f271ad09a914078c9aa45f8359d Mon Sep 17 00:00:00 2001 -From: Biwen Li -Date: Fri, 16 Nov 2018 14:23:40 +0800 -Subject: [PATCH 04/39] arch: support layerscape +From f29db0048a07384ee4cd962c676b750e13e5d6b0 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Mon, 6 May 2019 17:17:58 +0800 +Subject: [PATCH] arch: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + This is an integrated patch of arch for layerscape Signed-off-by: Abhimanyu Saini Signed-off-by: Alison Wang Signed-off-by: Amrita Kumari +Signed-off-by: Biwen Li Signed-off-by: Chenhui Zhao Signed-off-by: Dave Liu Signed-off-by: Guanhua @@ -19,6 +24,7 @@ Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Madalin Bucur Signed-off-by: Pan Jiafei +Signed-off-by: Pankaj Bansal Signed-off-by: Poonam Aggrwal Signed-off-by: Rajesh Bhagat Signed-off-by: Ramneek Mehresh @@ -26,28 +32,32 @@ Signed-off-by: Ran Wang Signed-off-by: Roy Pledge Signed-off-by: Shengzhou Liu Signed-off-by: Tang Yuantian +Signed-off-by: Vabhav Sharma Signed-off-by: Wang Dongsheng Signed-off-by: Xie Xiaobo Signed-off-by: Yangbo Lu +Signed-off-by: Yinbo Zhu Signed-off-by: Zhao Chenhui Signed-off-by: Zhao Qiang -Signed-off-by: Biwen Li --- - arch/arm/include/asm/delay.h | 16 ++++++++++++++ - arch/arm/include/asm/io.h | 31 +++++++++++++++++++++++++++ - arch/arm/include/asm/mach/map.h | 4 ++-- - arch/arm/include/asm/pgtable.h | 7 ++++++ - arch/arm/kernel/time.c | 3 +++ - arch/arm/mm/dma-mapping.c | 1 + - arch/arm/mm/ioremap.c | 7 ++++++ - arch/arm/mm/mmu.c | 9 ++++++++ - arch/arm64/include/asm/cache.h | 2 +- - arch/arm64/include/asm/io.h | 1 + - arch/arm64/include/asm/pgtable-prot.h | 3 +++ - arch/arm64/include/asm/pgtable.h | 5 +++++ - arch/arm64/mm/dma-mapping.c | 1 + - arch/arm64/mm/init.c | 12 +++++++---- - 14 files changed, 95 insertions(+), 7 deletions(-) + arch/arm/include/asm/delay.h | 16 ++++++ + arch/arm/include/asm/io.h | 31 ++++++++++ + arch/arm/include/asm/mach/map.h | 4 +- + arch/arm/include/asm/pgtable.h | 7 +++ + arch/arm/kernel/time.c | 3 + + arch/arm/mm/dma-mapping.c | 1 + + arch/arm/mm/ioremap.c | 7 +++ + arch/arm/mm/mmu.c | 9 +++ + arch/arm64/include/asm/cache.h | 2 +- + arch/arm64/include/asm/io.h | 1 + + arch/arm64/include/asm/pgtable-prot.h | 3 + + arch/arm64/include/asm/pgtable.h | 5 ++ + arch/arm64/mm/dma-mapping.c | 1 + + arch/arm64/mm/init.c | 12 ++-- + drivers/soc/fsl/guts.c | 9 +++ + drivers/soc/fsl/qixis_ctrl.c | 105 ++++++++++++++++++++++++++++++++++ + 16 files changed, 209 insertions(+), 7 deletions(-) + create mode 100644 drivers/soc/fsl/qixis_ctrl.c --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -323,3 +333,136 @@ Signed-off-by: Biwen Li high_memory = __va(memblock_end_of_DRAM() - 1) + 1; dma_contiguous_reserve(arm64_dma_phys_limit); +--- a/drivers/soc/fsl/guts.c ++++ b/drivers/soc/fsl/guts.c +@@ -100,6 +100,11 @@ static const struct fsl_soc_die_attr fsl + .svr = 0x87000000, + .mask = 0xfff70000, + }, ++ /* Die: LX2160A, SoC: LX2160A/LX2120A/LX2080A */ ++ { .die = "LX2160A", ++ .svr = 0x87360000, ++ .mask = 0xff3f0000, ++ }, + { }, + }; + +@@ -213,6 +218,10 @@ static const struct of_device_id fsl_gut + { .compatible = "fsl,ls1021a-dcfg", }, + { .compatible = "fsl,ls1043a-dcfg", }, + { .compatible = "fsl,ls2080a-dcfg", }, ++ { .compatible = "fsl,ls1088a-dcfg", }, ++ { .compatible = "fsl,ls1012a-dcfg", }, ++ { .compatible = "fsl,ls1046a-dcfg", }, ++ { .compatible = "fsl,lx2160a-dcfg", }, + {} + }; + MODULE_DEVICE_TABLE(of, fsl_guts_of_match); +--- /dev/null ++++ b/drivers/soc/fsl/qixis_ctrl.c +@@ -0,0 +1,105 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++ ++/* Freescale QIXIS system controller driver. ++ * ++ * Copyright 2015 Freescale Semiconductor, Inc. ++ * Copyright 2018-2019 NXP ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* QIXIS MAP */ ++struct fsl_qixis_regs { ++ u8 id; /* Identification Registers */ ++ u8 version; /* Version Register */ ++ u8 qixis_ver; /* QIXIS Version Register */ ++ u8 reserved1[0x1f]; ++}; ++ ++struct qixis_priv { ++ struct regmap *regmap; ++}; ++ ++static struct regmap_config qixis_regmap_config = { ++ .reg_bits = 8, ++ .val_bits = 8, ++}; ++ ++static const struct mfd_cell fsl_qixis_devs[] = { ++ { ++ .name = "reg-mux", ++ .of_compatible = "reg-mux", ++ }, ++}; ++ ++static int fsl_qixis_i2c_probe(struct i2c_client *client) ++{ ++ struct qixis_priv *priv; ++ int ret = 0; ++ u32 qver; ++ ++ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) ++ return -EOPNOTSUPP; ++ ++ priv = devm_kzalloc(&client->dev, sizeof(struct qixis_priv), ++ GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->regmap = regmap_init_i2c(client, &qixis_regmap_config); ++ regmap_read(priv->regmap, offsetof(struct fsl_qixis_regs, qixis_ver), ++ &qver); ++ pr_info("Freescale QIXIS Version: 0x%08x\n", qver); ++ ++ i2c_set_clientdata(client, priv); ++ ++ if (of_device_is_compatible(client->dev.of_node, "simple-mfd")) ++ ret = devm_mfd_add_devices(&client->dev, -1, fsl_qixis_devs, ++ ARRAY_SIZE(fsl_qixis_devs), NULL, 0, ++ NULL); ++ if (ret) ++ goto error; ++ ++ return ret; ++error: ++ regmap_exit(priv->regmap); ++ ++ return ret; ++} ++ ++static int fsl_qixis_i2c_remove(struct i2c_client *client) ++{ ++ struct qixis_priv *priv; ++ ++ priv = i2c_get_clientdata(client); ++ regmap_exit(priv->regmap); ++ ++ return 0; ++} ++ ++static const struct of_device_id fsl_qixis_i2c_of_match[] = { ++ { .compatible = "fsl,fpga-qixis-i2c" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, fsl_qixis_i2c_of_match); ++ ++static struct i2c_driver fsl_qixis_i2c_driver = { ++ .driver = { ++ .name = "qixis_ctrl_i2c", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(fsl_qixis_i2c_of_match), ++ }, ++ .probe_new = fsl_qixis_i2c_probe, ++ .remove = fsl_qixis_i2c_remove, ++}; ++module_i2c_driver(fsl_qixis_i2c_driver); ++ ++MODULE_AUTHOR("Wang Dongsheng "); ++MODULE_DESCRIPTION("Freescale QIXIS system controller driver"); ++MODULE_LICENSE("GPL"); ++ diff --git a/target/linux/layerscape/patches-4.14/302-dts-support-layerscape.patch b/target/linux/layerscape/patches-4.14/302-dts-support-layerscape.patch index afe8d450d9..871a8068cb 100644 --- a/target/linux/layerscape/patches-4.14/302-dts-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/302-dts-support-layerscape.patch @@ -1,8 +1,12 @@ -From caecd8632a257759735ed6dd9354091cae8a5746 Mon Sep 17 00:00:00 2001 +From cc1d1d1b68d18a31aeb8a572ca6b3929b083855c Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Fri, 16 Nov 2018 17:11:32 +0800 -Subject: [PATCH] dts: support layerscape This is an integrated patch of dts - for layerscape +Date: Wed, 17 Apr 2019 18:58:33 +0800 +Subject: [PATCH] dts: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is an integrated patch of dts for layerscape Signed-off-by: Abhimanyu Saini Signed-off-by: Akhil Goyal @@ -10,9 +14,7 @@ Signed-off-by: Alan Wang Signed-off-by: Alison Wang Signed-off-by: Amrita Kumari Signed-off-by: Anjaneyulu Jagarlmudi -Signed-off-by: Ashish Kumar Signed-off-by: Ashish Kumar -Signed-off-by: Bao Xiaowei Signed-off-by: Bharat Bhushan Signed-off-by: Bhaskar Upadhaya Signed-off-by: Bhupesh Sharma @@ -20,101 +22,132 @@ Signed-off-by: Biwen Li Signed-off-by: Bogdan Purcareata Signed-off-by: Calvin Johnson Signed-off-by: Camelia Groza +Signed-off-by: Catalin Neacsu Signed-off-by: Changming Huang +Signed-off-by: Chuanhua Han Signed-off-by: Constantin Tudor +Signed-off-by: David S. Miller +Signed-off-by: Florin Chiculita Signed-off-by: Florinel Iordache Signed-off-by: Guanhua Gao Signed-off-by: Honghua Yin +Signed-off-by: Horia Geantă Signed-off-by: Hou Zhiqiang Signed-off-by: Ioana Radulescu Signed-off-by: Iordache Florinel-R70177 Signed-off-by: Jagdish Gediya -Signed-off-by: Biwen Li +Signed-off-by: jiaheng.fan +Signed-off-by: Laurentiu Tudor +Signed-off-by: Li Yang +Signed-off-by: Madalin Bucur +Signed-off-by: Mathew McBride +Signed-off-by: Nipun Gupta +Signed-off-by: Pankaj Bansal +Signed-off-by: Pankaj Gupta +Signed-off-by: Peng Ma +Signed-off-by: Po Liu +Signed-off-by: Prabhakar Kushwaha +Signed-off-by: Pratiyush Mohan Srivastava +Signed-off-by: Priyanka Jain +Signed-off-by: Raghav Dogra +Signed-off-by: Rai Harninder +Signed-off-by: Ramneek Mehresh +Signed-off-by: Ran Wang +Signed-off-by: Roy Pledge +Signed-off-by: Sakar Arora +Signed-off-by: Santan Kumar +Signed-off-by: Scott Wood +Signed-off-by: Shaohui Xie +Signed-off-by: Shawn Guo +Signed-off-by: Sriram Dash +Signed-off-by: Sumit Garg +Signed-off-by: Suresh Gupta +Signed-off-by: Tang Yuantian +Signed-off-by: Tao Yang +Signed-off-by: Vabhav Sharma +Signed-off-by: Vicentiu Galanopulo +Signed-off-by: Vladimir Oltean +Signed-off-by: Wasim Khan +Signed-off-by: Xiaowei Bao +Signed-off-by: Yangbo Lu +Signed-off-by: Yinbo Zhu +Signed-off-by: Yogesh Gaur +Signed-off-by: Yuantian Tang +Signed-off-by: Yuan Yao +Signed-off-by: Zhang Ying-22455 +Signed-off-by: Zhao Chenhui +Signed-off-by: Zhao Qiang --- - arch/arm/boot/dts/ls1021a-qds.dts | 28 + - arch/arm/boot/dts/ls1021a-twr.dts | 27 + - arch/arm/boot/dts/ls1021a.dtsi | 105 +++- - arch/arm64/boot/dts/freescale/Makefile | 9 + - .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 123 +++++ - .../boot/dts/freescale/fsl-ls1012a-frdm.dts | 96 ++-- - .../boot/dts/freescale/fsl-ls1012a-frwy.dts | 177 +++++++ - .../boot/dts/freescale/fsl-ls1012a-qds.dts | 133 +++-- - .../boot/dts/freescale/fsl-ls1012a-rdb.dts | 100 ++-- - .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 179 +++++-- - .../boot/dts/freescale/fsl-ls1043-post.dtsi | 3 +- - .../dts/freescale/fsl-ls1043a-qds-sdk.dts | 71 +++ - .../boot/dts/freescale/fsl-ls1043a-qds.dts | 201 ++++++-- - .../dts/freescale/fsl-ls1043a-rdb-sdk.dts | 71 +++ - .../dts/freescale/fsl-ls1043a-rdb-usdpaa.dts | 117 +++++ - .../boot/dts/freescale/fsl-ls1043a-rdb.dts | 75 ++- - .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 196 +++++-- - .../boot/dts/freescale/fsl-ls1046-post.dtsi | 2 +- - .../dts/freescale/fsl-ls1046a-qds-sdk.dts | 79 +++ - .../boot/dts/freescale/fsl-ls1046a-qds.dts | 189 +++++-- - .../dts/freescale/fsl-ls1046a-rdb-sdk.dts | 115 +++++ - .../dts/freescale/fsl-ls1046a-rdb-usdpaa.dts | 110 ++++ - .../boot/dts/freescale/fsl-ls1046a-rdb.dts | 44 +- - .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 182 +++++-- - .../boot/dts/freescale/fsl-ls1088a-qds.dts | 88 ++-- - .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 150 ++++-- - .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 486 ++++++++++++++++-- - .../boot/dts/freescale/fsl-ls2080a-qds.dts | 100 ++-- - .../boot/dts/freescale/fsl-ls2080a-rdb.dts | 118 +++-- - .../boot/dts/freescale/fsl-ls2080a-simu.dts | 38 +- - .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 42 +- - .../boot/dts/freescale/fsl-ls2081a-rdb.dts | 163 ++++++ - .../boot/dts/freescale/fsl-ls2088a-qds.dts | 158 ++++-- - .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 118 +++-- - .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 44 +- - .../boot/dts/freescale/fsl-ls208xa-qds.dtsi | 43 +- - .../boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 60 +-- - .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 210 ++++++-- - .../dts/freescale/qoriq-bman-portals-sdk.dtsi | 55 ++ - .../dts/freescale/qoriq-bman-portals.dtsi | 8 +- - .../boot/dts/freescale/qoriq-dpaa-eth.dtsi | 97 ++++ - .../dts/freescale/qoriq-fman3-0-10g-0.dtsi | 11 +- - .../dts/freescale/qoriq-fman3-0-10g-1.dtsi | 11 +- - .../dts/freescale/qoriq-fman3-0-1g-0.dtsi | 7 +- - .../dts/freescale/qoriq-fman3-0-1g-1.dtsi | 7 +- - .../dts/freescale/qoriq-fman3-0-1g-2.dtsi | 7 +- - .../dts/freescale/qoriq-fman3-0-1g-3.dtsi | 7 +- - .../dts/freescale/qoriq-fman3-0-1g-4.dtsi | 7 +- - .../dts/freescale/qoriq-fman3-0-1g-5.dtsi | 7 +- - .../boot/dts/freescale/qoriq-fman3-0-6oh.dtsi | 47 ++ - .../boot/dts/freescale/qoriq-fman3-0.dtsi | 54 +- - .../dts/freescale/qoriq-qman-portals-sdk.dtsi | 38 ++ - .../dts/freescale/qoriq-qman-portals.dtsi | 9 +- - .../boot/dts/fsl/qoriq-fman-0-10g-0.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-0-1g-0.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-0-1g-1.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-0-1g-2.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-0-1g-3.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-0-1g-4.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-1-10g-0.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-1-1g-0.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-1-1g-1.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-1-1g-2.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-1-1g-3.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman-1-1g-4.dtsi | 4 +- - .../fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 4 +- - .../fsl/qoriq-fman3-0-10g-1-best-effort.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 4 +- - .../boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 4 +- - 83 files changed, 3742 insertions(+), 1000 deletions(-) + arch/arm/boot/dts/Makefile | 3 +- + arch/arm/boot/dts/imx25.dtsi | 4 +- + arch/arm/boot/dts/imx28.dtsi | 4 +- + arch/arm/boot/dts/imx35.dtsi | 4 +- + arch/arm/boot/dts/imx53.dtsi | 4 +- + arch/arm/boot/dts/ls1021a-iot.dts | 262 ++++ + arch/arm/boot/dts/ls1021a-qds.dts | 32 + + arch/arm/boot/dts/ls1021a-twr.dts | 27 + + arch/arm/boot/dts/ls1021a.dtsi | 111 +- + arch/arm64/boot/dts/freescale/Makefile | 16 +- + .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 126 ++ + .../boot/dts/freescale/fsl-ls1012a-frdm.dts | 97 +- + .../boot/dts/freescale/fsl-ls1012a-frwy.dts | 179 +++ + .../boot/dts/freescale/fsl-ls1012a-qds.dts | 136 +- + .../boot/dts/freescale/fsl-ls1012a-rdb.dts | 100 +- + .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 210 ++- + .../boot/dts/freescale/fsl-ls1043-post.dtsi | 3 +- + .../dts/freescale/fsl-ls1043a-qds-sdk.dts | 263 ++++ + .../boot/dts/freescale/fsl-ls1043a-qds.dts | 206 ++- + .../dts/freescale/fsl-ls1043a-rdb-sdk.dts | 262 ++++ + .../dts/freescale/fsl-ls1043a-rdb-usdpaa.dts | 140 ++ + .../boot/dts/freescale/fsl-ls1043a-rdb.dts | 76 +- + .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 382 +++-- + .../boot/dts/freescale/fsl-ls1046-post.dtsi | 2 +- + .../dts/freescale/fsl-ls1046a-qds-sdk.dts | 268 ++++ + .../boot/dts/freescale/fsl-ls1046a-qds.dts | 194 ++- + .../dts/freescale/fsl-ls1046a-rdb-sdk.dts | 307 ++++ + .../dts/freescale/fsl-ls1046a-rdb-usdpaa.dts | 133 ++ + .../boot/dts/freescale/fsl-ls1046a-rdb.dts | 48 +- + .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 386 +++-- + .../boot/dts/freescale/fsl-ls1088a-qds.dts | 88 +- + .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 150 +- + .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 546 ++++++- + .../boot/dts/freescale/fsl-ls2080a-qds.dts | 100 +- + .../boot/dts/freescale/fsl-ls2080a-rdb.dts | 118 +- + .../boot/dts/freescale/fsl-ls2080a-simu.dts | 38 +- + .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 50 +- + .../boot/dts/freescale/fsl-ls2081a-rdb.dts | 163 ++ + .../boot/dts/freescale/fsl-ls2088a-qds.dts | 158 +- + .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 118 +- + .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 52 +- + .../boot/dts/freescale/fsl-ls208xa-qds.dtsi | 43 +- + .../boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 60 +- + .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 299 ++-- + .../boot/dts/freescale/fsl-lx2160a-qds.dts | 353 +++++ + .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 241 +++ + .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 1318 +++++++++++++++++ + .../boot/dts/freescale/fsl-tmu-map1.dtsi | 99 ++ + .../boot/dts/freescale/fsl-tmu-map2.dtsi | 99 ++ + .../boot/dts/freescale/fsl-tmu-map3.dtsi | 99 ++ + arch/arm64/boot/dts/freescale/fsl-tmu.dtsi | 251 ++++ + .../dts/freescale/qoriq-bman-portals-sdk.dtsi | 55 + + .../dts/freescale/qoriq-bman-portals.dtsi | 8 +- + .../boot/dts/freescale/qoriq-dpaa-eth.dtsi | 97 ++ + .../dts/freescale/qoriq-fman3-0-10g-0.dtsi | 11 +- + .../dts/freescale/qoriq-fman3-0-10g-1.dtsi | 11 +- + .../dts/freescale/qoriq-fman3-0-1g-0.dtsi | 7 +- + .../dts/freescale/qoriq-fman3-0-1g-1.dtsi | 7 +- + .../dts/freescale/qoriq-fman3-0-1g-2.dtsi | 7 +- + .../dts/freescale/qoriq-fman3-0-1g-3.dtsi | 7 +- + .../dts/freescale/qoriq-fman3-0-1g-4.dtsi | 7 +- + .../dts/freescale/qoriq-fman3-0-1g-5.dtsi | 7 +- + .../boot/dts/freescale/qoriq-fman3-0-6oh.dtsi | 47 + + .../boot/dts/freescale/qoriq-fman3-0.dtsi | 67 +- + .../dts/freescale/qoriq-qman-portals-sdk.dtsi | 38 + + .../dts/freescale/qoriq-qman-portals.dtsi | 9 +- + .../boot/dts/freescale/traverse-ls1043s.dts | 29 + + .../boot/dts/freescale/traverse-ls1043v.dts | 29 + + 68 files changed, 7660 insertions(+), 1211 deletions(-) + create mode 100644 arch/arm/boot/dts/ls1021a-iot.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts @@ -124,11 +157,375 @@ Signed-off-by: Biwen Li create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts + create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts + create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts + create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi + create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi + create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi + create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi + create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -496,7 +496,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ + imx7s-warp.dtb + dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-qds.dtb \ +- ls1021a-twr.dtb ++ ls1021a-twr.dtb \ ++ ls1021a-iot.dtb + dtb-$(CONFIG_SOC_VF610) += \ + vf500-colibri-eval-v3.dtb \ + vf610-colibri-eval-v3.dtb \ +--- a/arch/arm/boot/dts/imx25.dtsi ++++ b/arch/arm/boot/dts/imx25.dtsi +@@ -122,7 +122,7 @@ + }; + + can1: can@43f88000 { +- compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx25-flexcan"; + reg = <0x43f88000 0x4000>; + interrupts = <43>; + clocks = <&clks 75>, <&clks 75>; +@@ -131,7 +131,7 @@ + }; + + can2: can@43f8c000 { +- compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx25-flexcan"; + reg = <0x43f8c000 0x4000>; + interrupts = <44>; + clocks = <&clks 76>, <&clks 76>; +--- a/arch/arm/boot/dts/imx28.dtsi ++++ b/arch/arm/boot/dts/imx28.dtsi +@@ -1038,7 +1038,7 @@ + }; + + can0: can@80032000 { +- compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx28-flexcan"; + reg = <0x80032000 0x2000>; + interrupts = <8>; + clocks = <&clks 58>, <&clks 58>; +@@ -1047,7 +1047,7 @@ + }; + + can1: can@80034000 { +- compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx28-flexcan"; + reg = <0x80034000 0x2000>; + interrupts = <9>; + clocks = <&clks 59>, <&clks 59>; +--- a/arch/arm/boot/dts/imx35.dtsi ++++ b/arch/arm/boot/dts/imx35.dtsi +@@ -303,7 +303,7 @@ + }; + + can1: can@53fe4000 { +- compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx35-flexcan"; + reg = <0x53fe4000 0x1000>; + clocks = <&clks 33>, <&clks 33>; + clock-names = "ipg", "per"; +@@ -312,7 +312,7 @@ + }; + + can2: can@53fe8000 { +- compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx35-flexcan"; + reg = <0x53fe8000 0x1000>; + clocks = <&clks 34>, <&clks 34>; + clock-names = "ipg", "per"; +--- a/arch/arm/boot/dts/imx53.dtsi ++++ b/arch/arm/boot/dts/imx53.dtsi +@@ -536,7 +536,7 @@ + }; + + can1: can@53fc8000 { +- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx53-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, +@@ -546,7 +546,7 @@ + }; + + can2: can@53fcc000 { +- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; ++ compatible = "fsl,imx53-flexcan"; + reg = <0x53fcc000 0x4000>; + interrupts = <83>; + clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, +--- /dev/null ++++ b/arch/arm/boot/dts/ls1021a-iot.dts +@@ -0,0 +1,262 @@ ++/* ++ * Copyright 2013-2016 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++/dts-v1/; ++#include "ls1021a.dtsi" ++ ++/ { ++ model = "LS1021A IOT Board"; ++ ++ sys_mclk: clock-mclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_3p3v: regulator@0 { ++ compatible = "regulator-fixed"; ++ reg = <0>; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ reg_2p5v: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "2P5V"; ++ regulator-min-microvolt = <2500000>; ++ regulator-max-microvolt = <2500000>; ++ regulator-always-on; ++ }; ++ }; ++ ++ sound { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,widgets = ++ "Microphone", "Microphone Jack", ++ "Headphone", "Headphone Jack", ++ "Speaker", "Speaker Ext", ++ "Line", "Line In Jack"; ++ simple-audio-card,routing = ++ "MIC_IN", "Microphone Jack", ++ "Microphone Jack", "Mic Bias", ++ "LINE_IN", "Line In Jack", ++ "Headphone Jack", "HP_OUT", ++ "Speaker Ext", "LINE_OUT"; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&sai2>; ++ frame-master; ++ bitclock-master; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&codec>; ++ frame-master; ++ bitclock-master; ++ }; ++ }; ++ ++ firmware { ++ optee { ++ compatible = "linaro,optee-tz"; ++ method = "smc"; ++ }; ++ }; ++}; ++ ++&enet0 { ++ tbi-handle = <&tbi1>; ++ phy-handle = <&phy1>; ++ phy-connection-type = "sgmii"; ++ status = "okay"; ++}; ++ ++&enet1 { ++ tbi-handle = <&tbi1>; ++ phy-handle = <&phy3>; ++ phy-connection-type = "sgmii"; ++ status = "okay"; ++}; ++ ++&enet2 { ++ fixed-link = <0 1 1000 0 0>; ++ phy-connection-type = "rgmii-id"; ++ status = "okay"; ++}; ++ ++&can0{ ++ status = "disabled"; ++}; ++ ++&can1{ ++ status = "disabled"; ++}; ++ ++&can2{ ++ status = "disabled"; ++}; ++ ++&can3{ ++ status = "okay"; ++}; ++ ++&esdhc{ ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ max1239@35 { ++ compatible = "maxim,max1239"; ++ reg = <0x35>; ++ #io-channel-cells = <1>; ++ }; ++ ++ codec: sgtl5000@2a { ++ #sound-dai-cells=<0x0>; ++ compatible = "fsl,sgtl5000"; ++ reg = <0x2a>; ++ VDDA-supply = <®_3p3v>; ++ VDDIO-supply = <®_2p5v>; ++ clocks = <&sys_mclk 1>; ++ }; ++ ++ pca9555: pca9555@23 { ++ compatible = "nxp,pca9555"; ++ /*pinctrl-names = "default";*/ ++ /*interrupt-parent = <&gpio2>; ++ interrupts = <19 0x2>;*/ ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ reg = <0x23>; ++ }; ++ ++ ina220@44 { ++ compatible = "ti,ina220"; ++ reg = <0x44>; ++ shunt-resistor = <1000>; ++ }; ++ ++ ina220@45 { ++ compatible = "ti,ina220"; ++ reg = <0x45>; ++ shunt-resistor = <1000>; ++ }; ++ ++ lm75b@48 { ++ compatible = "nxp,lm75a"; ++ reg = <0x48>; ++ }; ++ ++ adt7461a@4c { ++ compatible = "adt7461a"; ++ reg = <0x4c>; ++ }; ++ ++ hdmi: sii9022a@39 { ++ compatible = "fsl,sii902x"; ++ reg = <0x39>; ++ interrupts = ; ++ }; ++}; ++ ++&i2c1 { ++ status = "disabled"; ++}; ++ ++&ifc { ++ status = "disabled"; ++}; ++ ++&lpuart0 { ++ status = "okay"; ++}; ++ ++&mdio0 { ++ phy0: ethernet-phy@0 { ++ reg = <0x0>; ++ }; ++ phy1: ethernet-phy@1 { ++ reg = <0x1>; ++ }; ++ phy2: ethernet-phy@2 { ++ reg = <0x2>; ++ }; ++ phy3: ethernet-phy@3 { ++ reg = <0x3>; ++ }; ++ tbi1: tbi-phy@1f { ++ reg = <0x1f>; ++ device_type = "tbi-phy"; ++ }; ++}; ++ ++&qspi { ++ num-cs = <2>; ++ status = "okay"; ++ ++ qflash0: s25fl128s@0 { ++ compatible = "spansion,s25fl129p1"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <20000000>; ++ reg = <0>; ++ }; ++}; ++ ++&sai2 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&uart1 { ++ status = "okay"; ++}; ++ ++&dcu { ++ display = <&display>; ++ status = "okay"; ++ ++ display: display@0 { ++ bits-per-pixel = <24>; ++ ++ display-timings { ++ native-mode = <&timing0>; ++ ++ timing0: mode0 { ++ clock-frequency = <25000000>; ++ hactive = <640>; ++ vactive = <480>; ++ hback-porch = <80>; ++ hfront-porch = <80>; ++ vback-porch = <16>; ++ vfront-porch = <16>; ++ hsync-len = <12>; ++ vsync-len = <2>; ++ hsync-active = <1>; ++ vsync-active = <1>; ++ }; ++ }; ++ }; ++}; --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -124,6 +124,21 @@ @@ -165,7 +562,18 @@ Signed-off-by: Biwen Li fpga: board-control@3,0 { #address-cells = <1>; #size-cells = <1>; -@@ -331,3 +351,11 @@ +@@ -316,6 +336,10 @@ + }; + }; + ++&esdhc { ++ status = "okay"; ++}; ++ + &sai2 { + status = "okay"; + }; +@@ -331,3 +355,11 @@ &uart1 { status = "okay"; }; @@ -241,7 +649,7 @@ Signed-off-by: Biwen Li big-endian; }; -@@ -334,25 +335,41 @@ +@@ -334,25 +335,44 @@ status = "disabled"; }; @@ -268,6 +676,9 @@ Signed-off-by: Biwen Li interrupts = ; clock-names = "i2c"; clocks = <&clockgen 4 1>; ++ dma-names = "tx", "rx"; ++ dmas = <&edma0 1 39>, ++ <&edma0 1 38>; + fsl-scl-gpio = <&gpio3 23 0>; status = "disabled"; }; @@ -285,7 +696,7 @@ Signed-off-by: Biwen Li status = "disabled"; }; -@@ -497,6 +514,17 @@ +@@ -497,6 +517,17 @@ status = "disabled"; }; @@ -303,7 +714,7 @@ Signed-off-by: Biwen Li wdog0: watchdog@2ad0000 { compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; -@@ -550,6 +578,25 @@ +@@ -550,6 +581,25 @@ <&clockgen 4 1>; }; @@ -329,7 +740,7 @@ Signed-off-by: Biwen Li dcu: dcu@2ce0000 { compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; -@@ -684,6 +731,10 @@ +@@ -684,6 +734,11 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; @@ -337,10 +748,11 @@ Signed-off-by: Biwen Li + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; }; pcie@3400000 { -@@ -691,7 +742,9 @@ +@@ -691,7 +746,9 @@ reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -351,7 +763,15 @@ Signed-off-by: Biwen Li fsl,pcie-scfg = <&scfg 0>; #address-cells = <3>; #size-cells = <2>; -@@ -714,7 +767,9 @@ +@@ -707,6 +764,7 @@ + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; + }; + + pcie@3500000 { +@@ -714,7 +772,9 @@ reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -362,10 +782,12 @@ Signed-off-by: Biwen Li fsl,pcie-scfg = <&scfg 1>; #address-cells = <3>; #size-cells = <2>; -@@ -731,5 +786,45 @@ +@@ -730,6 +790,47 @@ + <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; - }; ++ status = "disabled"; ++ }; + + can0: can@2a70000 { + compatible = "fsl,ls1021ar2-flexcan"; @@ -405,12 +827,12 @@ Signed-off-by: Biwen Li + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; -+ }; + }; }; }; --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile -@@ -1,15 +1,24 @@ +@@ -1,19 +1,33 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb @@ -435,9 +857,19 @@ Signed-off-by: Biwen Li dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +- ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb ++ ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043v.dtb ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043s.dtb ++ + always := $(dtb-y) + subdir-y := $(dts-dirs) + clean-files := *.dtb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts -@@ -0,0 +1,123 @@ +@@ -0,0 +1,126 @@ +/* + * Device Tree file for NXP LS1012A 2G5RDB Board. + * @@ -529,35 +961,38 @@ Signed-off-by: Biwen Li + #address-cells = <1>; + #size-cells = <0>; + -+ ethernet@0 { ++ pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii-2500"; -+ fsl,pfe-phy-if-flags = <0x0>; -+ -+ mdio@0 { -+ reg = <0x1>; /* enabled/disabled */ -+ }; ++ phy-handle = <&sgmii_phy1>; + }; + -+ ethernet@1 { ++ pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ -+ fsl,gemac-bus-id = < 0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = < 0x2>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii-2500"; -+ fsl,pfe-phy-if-flags = <0x0>; ++ phy-handle = <&sgmii_phy2>; ++ }; ++ ++ mdio@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; + -+ mdio@0 { -+ reg = <0x0>; /* enabled/disabled */ ++ sgmii_phy1: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ reg = <0x1>; ++ }; ++ ++ sgmii_phy2: ethernet-phy@2 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ reg = <0x2>; + }; + }; +}; @@ -622,7 +1057,7 @@ Signed-off-by: Biwen Li sys_mclk: clock-mclk { compatible = "fixed-clock"; #clock-cells = <0>; -@@ -110,6 +79,44 @@ +@@ -110,6 +79,45 @@ }; }; @@ -631,35 +1066,36 @@ Signed-off-by: Biwen Li + #address-cells = <1>; + #size-cells = <0>; + -+ ethernet@0 { ++ pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; -+ -+ mdio@0 { -+ reg = <0x1>; /* enabled/disabled */ -+ }; ++ phy-handle = <&sgmii_phy1>; + }; + -+ ethernet@1 { ++ pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; ++ phy-handle = <&sgmii_phy2>; ++ }; + -+ mdio@0 { -+ reg = <0x0>; /* enabled/disabled */ ++ mdio@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ sgmii_phy1: ethernet-phy@2 { ++ reg = <0x2>; ++ }; ++ ++ sgmii_phy2: ethernet-phy@1 { ++ reg = <0x1>; + }; + }; +}; @@ -667,7 +1103,7 @@ Signed-off-by: Biwen Li &sai2 { status = "okay"; }; -@@ -117,3 +124,18 @@ +@@ -117,3 +125,18 @@ &sata { status = "okay"; }; @@ -688,7 +1124,7 @@ Signed-off-by: Biwen Li +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts -@@ -0,0 +1,177 @@ +@@ -0,0 +1,179 @@ +/* + * Device Tree file for NXP LS1012A FRWY Board. + * @@ -830,35 +1266,37 @@ Signed-off-by: Biwen Li + #address-cells = <1>; + #size-cells = <0>; + -+ ethernet@0 { ++ pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ + fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; -+ -+ mdio@0 { -+ reg = <0x1>; /* enabled/disabled */ -+ }; ++ phy-handle = <&sgmii_phy1>; + }; + -+ ethernet@1 { ++ pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; ++ phy-handle = <&sgmii_phy2>; ++ }; ++ ++ mdio@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ sgmii_phy1: ethernet-phy@2 { ++ reg = <0x2>; ++ }; + -+ mdio@0 { -+ reg = <0x0>; /* enabled/disabled */ ++ sgmii_phy2: ethernet-phy@1 { ++ reg = <0x1>; + }; + }; +}; @@ -971,7 +1409,7 @@ Signed-off-by: Biwen Li &duart0 { status = "okay"; }; -@@ -131,6 +137,44 @@ +@@ -131,6 +137,47 @@ }; }; @@ -980,35 +1418,38 @@ Signed-off-by: Biwen Li + #address-cells = <1>; + #size-cells = <0>; + -+ ethernet@0 { ++ pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */ + fsl,mdio-mux-val = <0x2>; + phy-mode = "sgmii-2500"; -+ fsl,pfe-phy-if-flags = <0x0>; -+ -+ mdio@0 { -+ reg = <0x1>; /* enabled/disabled */ -+ }; ++ phy-handle = <&sgmii_phy1>; + }; + -+ ethernet@1 { ++ pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ + fsl,mdio-mux-val = <0x3>; + phy-mode = "sgmii-2500"; -+ fsl,pfe-phy-if-flags = <0x0>; ++ phy-handle = <&sgmii_phy2>; ++ }; ++ ++ mdio@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; + -+ mdio@0 { -+ reg = <0x0>; /* enabled/disabled */ ++ sgmii_phy1: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ reg = <0x1>; ++ }; ++ ++ sgmii_phy2: ethernet-phy@2 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ reg = <0x2>; + }; + }; +}; @@ -1016,7 +1457,7 @@ Signed-off-by: Biwen Li &sai2 { status = "okay"; }; -@@ -138,3 +182,18 @@ +@@ -138,3 +185,18 @@ &sata { status = "okay"; }; @@ -1110,35 +1551,35 @@ Signed-off-by: Biwen Li + #address-cells = <1>; + #size-cells = <0>; + -+ ethernet@0 { ++ pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; -+ -+ mdio@0 { -+ reg = <0x1>; /* enabled/disabled */ -+ }; ++ phy-handle = <&sgmii_phy>; + }; + -+ ethernet@1 { ++ pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ -+ fsl,gemac-bus-id = < 0x1 >; /* BUS_ID */ -+ fsl,gemac-phy-id = < 0x1 >; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "rgmii-txid"; -+ fsl,pfe-phy-if-flags = <0x0>; ++ phy-handle = <&rgmii_phy>; ++ }; ++ mdio@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ sgmii_phy: ethernet-phy@2 { ++ reg = <0x2>; ++ }; + -+ mdio@0 { -+ reg = <0x0>; /* enabled/disabled */ ++ rgmii_phy: ethernet-phy@1 { ++ reg = <0x1>; + }; + }; +}; @@ -1206,7 +1647,14 @@ Signed-off-by: Biwen Li */ #include -@@ -70,6 +34,24 @@ +@@ -64,12 +28,30 @@ + #address-cells = <1>; + #size-cells = <0>; + +- cpu0: cpu@0 { ++ cooling_map0: cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; reg = <0x0>; clocks = <&clockgen 1 0>; #cooling-cells = <2>; @@ -1240,10 +1688,40 @@ Signed-off-by: Biwen Li big-endian; }; -@@ -335,13 +317,23 @@ - }; +@@ -304,44 +286,25 @@ + #thermal-sensor-cells = <1>; }; +- thermal-zones { +- cpu_thermal: cpu-thermal { +- polling-delay-passive = <1000>; +- polling-delay = <5000>; +- thermal-sensors = <&tmu 0>; +- +- trips { +- cpu_alert: cpu-alert { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- +- cpu_crit: cpu-crit { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "critical"; +- }; +- }; ++ #include "fsl-tmu.dtsi" + +- cooling-maps { +- map0 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu0 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- }; +- }; + ftm0: ftm0@29d0000 { + compatible = "fsl,ls1012a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>, @@ -1251,8 +1729,8 @@ Signed-off-by: Biwen Li + reg-names = "ftm", "pmctrl"; + interrupts = <0 86 0x4>; + big-endian; -+ }; -+ + }; + i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c"; @@ -1262,11 +1740,11 @@ Signed-off-by: Biwen Li interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 4 3>; -+ fsl-scl-gpio = <&gpio0 13 0>; ++ scl-gpios = <&gpio0 13 0>; status = "disabled"; }; -@@ -351,7 +343,20 @@ +@@ -351,7 +314,20 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; @@ -1287,7 +1765,7 @@ Signed-off-by: Biwen Li status = "disabled"; }; -@@ -400,6 +405,20 @@ +@@ -400,6 +376,20 @@ big-endian; }; @@ -1308,15 +1786,16 @@ Signed-off-by: Biwen Li sai1: sai@2b50000 { #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; -@@ -451,6 +470,7 @@ +@@ -451,6 +441,8 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; }; sata: sata@3200000 { -@@ -471,5 +491,84 @@ +@@ -471,5 +463,85 @@ dr_mode = "host"; phy_type = "ulpi"; }; @@ -1387,11 +1866,6 @@ Signed-off-by: Biwen Li + clock-names = "pfe"; + + status = "okay"; -+ pfe_mac0: ethernet@0 { -+ }; -+ -+ pfe_mac1: ethernet@1 { -+ }; + }; + + firmware { @@ -1399,7 +1873,13 @@ Signed-off-by: Biwen Li + compatible = "linaro,optee-tz"; + method = "smc"; + }; - }; ++ }; ++}; ++ ++&thermal_zones { ++ thermal-zone0 { ++ status = "okay"; + }; }; --- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi @@ -1416,7 +1896,7 @@ Signed-off-by: Biwen Li &soc { --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts -@@ -0,0 +1,71 @@ +@@ -0,0 +1,263 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * @@ -1481,12 +1961,204 @@ Signed-off-by: Biwen Li +}; + +&soc { ++/delete-property/ dma-coherent; ++ +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" ++ ++pcie@3400000 { ++ /delete-property/ iommu-map; ++ dma-coherent; ++}; ++ ++pcie@3500000 { ++ /delete-property/ iommu-map; ++ dma-coherent; ++}; ++ ++pcie@3600000 { ++ /delete-property/ iommu-map; ++ dma-coherent; ++}; ++ ++/delete-node/ iommu@9000000; +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; ++ dma-coherent; ++}; ++ ++&clockgen { ++ dma-coherent; ++}; ++ ++&scfg { ++ dma-coherent; ++}; ++ ++&crypto { ++ dma-coherent; ++}; ++ ++&dcfg { ++ dma-coherent; ++}; ++ ++&ifc { ++ dma-coherent; ++}; ++ ++&qspi { ++ dma-coherent; ++}; ++ ++&esdhc { ++ dma-coherent; ++}; ++ ++&ddr { ++ dma-coherent; ++}; ++ ++&tmu { ++ dma-coherent; ++}; ++ ++&qman { ++ dma-coherent; ++}; ++ ++&bman { ++ dma-coherent; ++}; ++ ++&bportals { ++ dma-coherent; ++}; ++ ++&qportals { ++ dma-coherent; ++}; ++ ++&dspi0 { ++ dma-coherent; ++}; ++ ++&dspi1 { ++ dma-coherent; ++}; ++ ++&i2c0 { ++ dma-coherent; ++}; ++ ++&i2c1 { ++ dma-coherent; ++}; ++ ++&i2c2 { ++ dma-coherent; ++}; ++ ++&i2c3 { ++ dma-coherent; ++}; ++ ++&duart0 { ++ dma-coherent; ++}; ++ ++&duart1 { ++ dma-coherent; ++}; ++ ++&duart2 { ++ dma-coherent; ++}; ++ ++&duart3 { ++ dma-coherent; ++}; ++ ++&gpio1 { ++ dma-coherent; ++}; ++ ++&gpio2 { ++ dma-coherent; ++}; ++ ++&gpio3 { ++ dma-coherent; ++}; ++ ++&gpio4 { ++ dma-coherent; ++}; ++ ++&uqe { ++ dma-coherent; ++}; ++ ++&lpuart0 { ++ dma-coherent; ++}; ++ ++&lpuart1 { ++ dma-coherent; ++}; ++ ++&lpuart2 { ++ dma-coherent; ++}; ++ ++&lpuart3 { ++ dma-coherent; ++}; ++ ++&lpuart4 { ++ dma-coherent; ++}; ++ ++&lpuart5 { ++ dma-coherent; ++}; ++ ++&ftm0 { ++ dma-coherent; ++}; ++ ++&wdog0 { ++ dma-coherent; ++}; ++ ++&edma0 { ++ dma-coherent; ++}; ++ ++&qdma { ++ dma-coherent; ++}; ++ ++&msi1 { ++ dma-coherent; ++}; ++ ++&msi2 { ++ dma-coherent; ++}; ++ ++&msi3 { ++ dma-coherent; ++}; ++ ++&ptp_timer0 { ++ dma-coherent; ++}; ++ ++&fsldpaa { ++ dma-coherent; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -1562,7 +2234,20 @@ Signed-off-by: Biwen Li }; chosen { -@@ -179,7 +158,153 @@ +@@ -97,8 +76,11 @@ + }; + + fpga: board-control@2,0 { +- compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis"; ++ compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-bus"; + reg = <0x2 0x0 0x0000100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 2 0 0x100>; + }; + }; + +@@ -179,7 +161,153 @@ #size-cells = <1>; spi-max-frequency = <20000000>; reg = <0>; @@ -1718,7 +2403,7 @@ Signed-off-by: Biwen Li +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts -@@ -0,0 +1,71 @@ +@@ -0,0 +1,262 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * @@ -1783,16 +2468,207 @@ Signed-off-by: Biwen Li +}; + +&soc { ++/delete-property/ dma-coherent; ++ +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" ++ ++pcie@3400000 { ++ /delete-property/ iommu-map; ++ dma-coherent; ++}; ++ ++pcie@3500000 { ++ /delete-property/ iommu-map; ++ dma-coherent; ++}; ++ ++pcie@3600000 { ++ /delete-property/ iommu-map; ++ dma-coherent; ++}; ++ ++/delete-node/ iommu@9000000; +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; +}; ++ ++&clockgen { ++ dma-coherent; ++}; ++ ++&scfg { ++ dma-coherent; ++}; ++ ++&crypto { ++ dma-coherent; ++}; ++ ++&dcfg { ++ dma-coherent; ++}; ++ ++&ifc { ++ dma-coherent; ++}; ++ ++&qspi { ++ dma-coherent; ++}; ++ ++&esdhc { ++ dma-coherent; ++}; ++ ++&ddr { ++ dma-coherent; ++}; ++ ++&tmu { ++ dma-coherent; ++}; ++ ++&qman { ++ dma-coherent; ++}; ++ ++&bman { ++ dma-coherent; ++}; ++ ++&bportals { ++ dma-coherent; ++}; ++ ++&qportals { ++ dma-coherent; ++}; ++ ++&dspi0 { ++ dma-coherent; ++}; ++ ++&dspi1 { ++ dma-coherent; ++}; ++ ++&i2c0 { ++ dma-coherent; ++}; ++ ++&i2c1 { ++ dma-coherent; ++}; ++ ++&i2c2 { ++ dma-coherent; ++}; ++ ++&i2c3 { ++ dma-coherent; ++}; ++ ++&duart0 { ++ dma-coherent; ++}; ++ ++&duart1 { ++ dma-coherent; ++}; ++ ++&duart2 { ++ dma-coherent; ++}; ++ ++&duart3 { ++ dma-coherent; ++}; ++ ++&gpio1 { ++ dma-coherent; ++}; ++ ++&gpio2 { ++ dma-coherent; ++}; ++ ++&gpio3 { ++ dma-coherent; ++}; ++ ++&gpio4 { ++ dma-coherent; ++}; ++ ++&lpuart0 { ++ dma-coherent; ++}; ++ ++&lpuart1 { ++ dma-coherent; ++}; ++ ++&lpuart2 { ++ dma-coherent; ++}; ++ ++&lpuart3 { ++ dma-coherent; ++}; ++ ++&lpuart4 { ++ dma-coherent; ++}; ++ ++&lpuart5 { ++ dma-coherent; ++}; ++ ++&ftm0 { ++ dma-coherent; ++}; ++ ++&wdog0 { ++ dma-coherent; ++}; ++ ++&edma0 { ++ dma-coherent; ++}; ++ ++&qdma { ++ dma-coherent; ++}; ++ ++&msi1 { ++ dma-coherent; ++}; ++ ++&msi2 { ++ dma-coherent; ++}; ++ ++&msi3 { ++ dma-coherent; ++}; ++ ++&fman0 { ++ dma-coherent; ++}; ++ ++&ptp_timer0 { ++ dma-coherent; ++}; ++ ++&fsldpaa { ++ dma-coherent; ++}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts -@@ -0,0 +1,117 @@ +@@ -0,0 +1,140 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * @@ -1811,6 +2687,7 @@ Signed-off-by: Biwen Li + fsl,bpid = <7>; + fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>; + fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>; ++ dma-coherent; + }; + + bp8: buffer-pool@8 { @@ -1818,6 +2695,7 @@ Signed-off-by: Biwen Li + fsl,bpid = <8>; + fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>; + fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; ++ dma-coherent; + }; + + bp9: buffer-pool@9 { @@ -1825,10 +2703,12 @@ Signed-off-by: Biwen Li + fsl,bpid = <9>; + fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>; + fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; ++ dma-coherent; + }; + + fsl,dpaa { + compatible = "fsl,ls1043a", "fsl,dpaa", "simple-bus"; ++ dma-coherent; + + ethernet@0 { + compatible = "fsl,dpa-ethernet-init"; @@ -1887,6 +2767,20 @@ Signed-off-by: Biwen Li + fsl,fman-oh-port = <&fman0_oh2>; + }; + }; ++ ++ pcie@3400000 { ++ /delete-property/ iommu-map; ++ }; ++ ++ pcie@3500000 { ++ /delete-property/ iommu-map; ++ }; ++ ++ pcie@3600000 { ++ /delete-property/ iommu-map; ++ }; ++ ++ /delete-node/ iommu@9000000; +}; +/ { + reserved-memory { @@ -1894,11 +2788,16 @@ Signed-off-by: Biwen Li + #size-cells = <2>; + ranges; + ++ /* For legacy usdpaa based use-cases, update the size and ++ alignment parameters. e.g. to allocate 256 MB memory: ++ size = <0 0x10000000>; ++ alignment = <0 0x10000000>; ++ */ + usdpaa_mem: usdpaa_mem { + compatible = "fsl,usdpaa-mem"; + alloc-ranges = <0 0 0x10000 0>; -+ size = <0 0x10000000>; -+ alignment = <0 0x10000000>; ++ size = <0 0x1000>; ++ alignment = <0 0x1000>; + }; + }; +}; @@ -1961,7 +2860,15 @@ Signed-off-by: Biwen Li */ /dts-v1/; -@@ -86,6 +49,10 @@ +@@ -51,7 +14,6 @@ + model = "LS1043A RDB Board"; + + aliases { +- crypto = &crypto; + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; +@@ -86,6 +48,10 @@ compatible = "pericom,pt7c4338"; reg = <0x68>; }; @@ -1972,7 +2879,7 @@ Signed-off-by: Biwen Li }; &ifc { -@@ -130,6 +97,38 @@ +@@ -130,6 +96,38 @@ reg = <0>; spi-max-frequency = <1000000>; /* input clock */ }; @@ -2062,7 +2969,23 @@ Signed-off-by: Biwen Li */ #include -@@ -81,6 +44,7 @@ +@@ -54,6 +17,7 @@ + #size-cells = <2>; + + aliases { ++ crypto = &crypto; + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; +@@ -74,13 +38,14 @@ + * + * Currently supported enable-method is psci v0.2 + */ +- cpu0: cpu@0 { ++ cooling_map0: cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; #cooling-cells = <2>; @@ -2070,7 +2993,7 @@ Signed-off-by: Biwen Li }; cpu1: cpu@1 { -@@ -89,6 +53,7 @@ +@@ -89,6 +54,7 @@ reg = <0x1>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; @@ -2078,7 +3001,7 @@ Signed-off-by: Biwen Li }; cpu2: cpu@2 { -@@ -97,6 +62,7 @@ +@@ -97,6 +63,7 @@ reg = <0x2>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; @@ -2086,7 +3009,7 @@ Signed-off-by: Biwen Li }; cpu3: cpu@3 { -@@ -105,6 +71,7 @@ +@@ -105,6 +72,7 @@ reg = <0x3>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; @@ -2094,7 +3017,7 @@ Signed-off-by: Biwen Li }; l2: l2-cache { -@@ -112,6 +79,23 @@ +@@ -112,6 +80,23 @@ }; }; @@ -2118,7 +3041,66 @@ Signed-off-by: Biwen Li memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0 0x80000000>; -@@ -255,7 +239,7 @@ +@@ -196,6 +181,8 @@ + #address-cells = <2>; + #size-cells = <2>; + ranges; ++ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; ++ dma-coherent; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1043a-clockgen"; +@@ -204,6 +191,49 @@ + clocks = <&sysclk>; + }; + ++ smmu: iommu@9000000 { ++ compatible = "arm,mmu-500"; ++ reg = <0 0x9000000 0 0x400000>; ++ dma-coherent; ++ stream-match-mask = <0x7f00>; ++ #global-interrupts = <2>; ++ #iommu-cells = <1>; ++ interrupts = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ }; ++ + scfg: scfg@1570000 { + compatible = "fsl,ls1043a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; +@@ -255,7 +285,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1043a-dcfg", "syscon"; @@ -2127,7 +3109,45 @@ Signed-off-by: Biwen Li big-endian; }; -@@ -422,7 +406,7 @@ +@@ -342,36 +372,7 @@ + #thermal-sensor-cells = <1>; + }; + +- thermal-zones { +- cpu_thermal: cpu-thermal { +- polling-delay-passive = <1000>; +- polling-delay = <5000>; +- +- thermal-sensors = <&tmu 3>; +- +- trips { +- cpu_alert: cpu-alert { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- cpu_crit: cpu-crit { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "critical"; +- }; +- }; +- +- cooling-maps { +- map0 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu0 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- }; +- }; +- }; ++ #include "fsl-tmu.dtsi" + + qman: qman@1880000 { + compatible = "fsl,qman"; +@@ -422,7 +423,7 @@ }; i2c0: i2c@2180000 { @@ -2136,15 +3156,15 @@ Signed-off-by: Biwen Li #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; -@@ -432,6 +416,7 @@ +@@ -432,6 +433,7 @@ dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; -+ fsl-scl-gpio = <&gpio4 12 0>; ++ scl-gpios = <&gpio4 12 0>; status = "disabled"; }; -@@ -536,6 +521,72 @@ +@@ -536,6 +538,72 @@ #interrupt-cells = <2>; }; @@ -2217,7 +3237,7 @@ Signed-off-by: Biwen Li lpuart0: serial@2950000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; -@@ -590,6 +641,16 @@ +@@ -590,6 +658,16 @@ status = "disabled"; }; @@ -2234,40 +3254,101 @@ Signed-off-by: Biwen Li wdog0: wdog@2ad0000 { compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; -@@ -622,6 +683,9 @@ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb1: usb3@3000000 { -@@ -631,6 +695,9 @@ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb2: usb3@3100000 { -@@ -640,6 +707,9 @@ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - sata: sata@3200000 { -@@ -652,6 +722,27 @@ - dma-coherent; +@@ -615,41 +693,81 @@ + <&clockgen 4 0>; }; +- usb0: usb3@2f00000 { +- compatible = "snps,dwc3"; +- reg = <0x0 0x2f00000 0x0 0x10000>; +- interrupts = <0 60 0x4>; +- dr_mode = "host"; +- snps,quirk-frame-length-adjustment = <0x20>; +- snps,dis_rxdet_inp3_quirk; +- }; +- +- usb1: usb3@3000000 { +- compatible = "snps,dwc3"; +- reg = <0x0 0x3000000 0x0 0x10000>; +- interrupts = <0 61 0x4>; +- dr_mode = "host"; +- snps,quirk-frame-length-adjustment = <0x20>; +- snps,dis_rxdet_inp3_quirk; +- }; +- +- usb2: usb3@3100000 { +- compatible = "snps,dwc3"; +- reg = <0x0 0x3100000 0x0 0x10000>; +- interrupts = <0 63 0x4>; +- dr_mode = "host"; +- snps,quirk-frame-length-adjustment = <0x20>; +- snps,dis_rxdet_inp3_quirk; +- }; +- +- sata: sata@3200000 { +- compatible = "fsl,ls1043a-ahci"; +- reg = <0x0 0x3200000 0x0 0x10000>, +- <0x0 0x20140520 0x0 0x4>; +- reg-names = "ahci", "sata-ecc"; +- interrupts = <0 69 0x4>; +- clocks = <&clockgen 4 0>; +- dma-coherent; ++ aux_bus: aux_bus { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ compatible = "simple-bus"; ++ ranges; ++ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; ++ ++ usb0: usb3@2f00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x2f00000 0x0 0x10000>; ++ interrupts = <0 60 0x4>; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ usb3-lpm-capable; ++ snps,dis-u1u2-when-u3-quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ }; ++ ++ usb1: usb3@3000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3000000 0x0 0x10000>; ++ interrupts = <0 61 0x4>; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ usb3-lpm-capable; ++ snps,dis-u1u2-when-u3-quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ }; ++ ++ usb2: usb3@3100000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3100000 0x0 0x10000>; ++ interrupts = <0 63 0x4>; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ usb3-lpm-capable; ++ snps,dis-u1u2-when-u3-quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ }; ++ ++ sata: sata@3200000 { ++ compatible = "fsl,ls1043a-ahci"; ++ reg = <0x0 0x3200000 0x0 0x10000>, ++ <0x0 0x20140520 0x0 0x4>; ++ reg-names = "ahci", "sata-ecc"; ++ interrupts = <0 69 0x4>; ++ clocks = <&clockgen 4 0>; ++ }; ++ }; ++ + qdma: qdma@8380000 { + compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ @@ -2287,12 +3368,10 @@ Signed-off-by: Biwen Li + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; -+ }; -+ + }; + msi1: msi-controller1@1571000 { - compatible = "fsl,ls1043a-msi"; - reg = <0x0 0x1571000 0x0 0x8>; -@@ -678,9 +769,9 @@ +@@ -678,13 +796,13 @@ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -2305,7 +3384,20 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -@@ -703,9 +794,9 @@ +- dma-coherent; ++ iommu-map = <0 &smmu 0 1>; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ +@@ -696,6 +814,7 @@ + <0000 0 0 2 &gic 0 111 0x4>, + <0000 0 0 3 &gic 0 112 0x4>, + <0000 0 0 4 &gic 0 113 0x4>; ++ status = "disabled"; + }; + + pcie@3500000 { +@@ -703,13 +822,13 @@ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -2318,7 +3410,20 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -@@ -728,9 +819,9 @@ +- dma-coherent; ++ iommu-map = <0 &smmu 0 1>; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ +@@ -721,6 +840,7 @@ + <0000 0 0 2 &gic 0 121 0x4>, + <0000 0 0 3 &gic 0 122 0x4>, + <0000 0 0 4 &gic 0 123 0x4>; ++ status = "disabled"; + }; + + pcie@3600000 { +@@ -728,13 +848,13 @@ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -2331,20 +3436,56 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -@@ -749,6 +840,13 @@ - }; - }; - +- dma-coherent; ++ iommu-map = <0 &smmu 0 1>; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ +@@ -746,6 +866,14 @@ + <0000 0 0 2 &gic 0 155 0x4>, + <0000 0 0 3 &gic 0 156 0x4>, + <0000 0 0 4 &gic 0 157 0x4>; ++ status = "disabled"; ++ }; ++ }; ++ + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; -+ }; -+ }; -+ - }; + }; + }; + +@@ -753,3 +881,29 @@ #include "qoriq-qman-portals.dtsi" + #include "qoriq-bman-portals.dtsi" ++ ++&thermal_zones { ++ thermal-zone0 { ++ status = "okay"; ++ }; ++ ++ thermal-zone1 { ++ status = "okay"; ++ }; ++ ++ thermal-zone2 { ++ status = "okay"; ++ }; ++ ++ thermal-zone3 { ++ status = "okay"; ++ }; ++ ++ thermal-zone4 { ++ status = "okay"; ++ }; ++ ++ thermal-zone5 { ++ status = "okay"; ++ }; ++}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi @@ -1,9 +1,9 @@ @@ -2360,7 +3501,7 @@ Signed-off-by: Biwen Li &soc { --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts -@@ -0,0 +1,79 @@ +@@ -0,0 +1,268 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * @@ -2425,8 +3566,24 @@ Signed-off-by: Biwen Li +}; + +&soc { ++/delete-property/ dma-coherent; ++ +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" ++ ++pcie@3400000 { ++ /delete-property/ iommu-map; ++}; ++ ++pcie@3500000 { ++ /delete-property/ iommu-map; ++}; ++ ++pcie@3600000 { ++ /delete-property/ iommu-map; ++}; ++ ++/delete-node/ iommu@9000000; +}; + +&fsldpaa { @@ -2439,6 +3596,179 @@ Signed-off-by: Biwen Li + +&fman0 { + compatible = "fsl,fman", "simple-bus"; ++ dma-coherent; ++}; ++ ++&clockgen { ++ dma-coherent; ++}; ++ ++&scfg { ++ dma-coherent; ++}; ++ ++&crypto { ++ dma-coherent; ++}; ++ ++&dcfg { ++ dma-coherent; ++}; ++ ++&ifc { ++ dma-coherent; ++}; ++ ++&qspi { ++ dma-coherent; ++}; ++ ++&esdhc { ++ dma-coherent; ++}; ++ ++&ddr { ++ dma-coherent; ++}; ++ ++&tmu { ++ dma-coherent; ++}; ++ ++&qman { ++ dma-coherent; ++}; ++ ++&bman { ++ dma-coherent; ++}; ++ ++&bportals { ++ dma-coherent; ++}; ++ ++&qportals { ++ dma-coherent; ++}; ++ ++&dspi { ++ dma-coherent; ++}; ++ ++&i2c0 { ++ dma-coherent; ++}; ++ ++&i2c1 { ++ dma-coherent; ++}; ++ ++&i2c2 { ++ dma-coherent; ++}; ++ ++&i2c3 { ++ dma-coherent; ++}; ++ ++&duart0 { ++ dma-coherent; ++}; ++ ++&duart1 { ++ dma-coherent; ++}; ++ ++&duart2 { ++ dma-coherent; ++}; ++ ++&duart3 { ++ dma-coherent; ++}; ++ ++&gpio0 { ++ dma-coherent; ++}; ++ ++&gpio1 { ++ dma-coherent; ++}; ++ ++&gpio2 { ++ dma-coherent; ++}; ++ ++&gpio3 { ++ dma-coherent; ++}; ++ ++&lpuart0 { ++ dma-coherent; ++}; ++ ++&lpuart1 { ++ dma-coherent; ++}; ++ ++&lpuart2 { ++ dma-coherent; ++}; ++ ++&lpuart3 { ++ dma-coherent; ++}; ++ ++&lpuart4 { ++ dma-coherent; ++}; ++ ++&lpuart5 { ++ dma-coherent; ++}; ++ ++&ftm0 { ++ dma-coherent; ++}; ++ ++&wdog0 { ++ dma-coherent; ++}; ++ ++&edma0 { ++ dma-coherent; ++}; ++ ++&sata { ++ dma-coherent; ++}; ++ ++&qdma { ++ dma-coherent; ++}; ++ ++&msi1 { ++ dma-coherent; ++}; ++ ++&msi2 { ++ dma-coherent; ++}; ++ ++&msi3 { ++ dma-coherent; ++}; ++ ++&ptp_timer0 { ++ dma-coherent; ++}; ++ ++&serdes1 { ++ dma-coherent; ++}; ++ ++&fsldpaa { ++ dma-coherent; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -2512,9 +3842,23 @@ Signed-off-by: Biwen Li }; chosen { -@@ -208,7 +185,143 @@ +@@ -188,8 +165,9 @@ + }; + + fpga: board-control@2,0 { +- compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis"; ++ compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-bus"; + reg = <0x2 0x0 0x0000100>; ++ ranges = <0 2 0 0x100>; + }; + }; + +@@ -206,9 +184,145 @@ + compatible = "spansion,m25p80"; + #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; +- spi-max-frequency = <20000000>; ++ spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; @@ -2658,7 +4002,7 @@ Signed-off-by: Biwen Li +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts -@@ -0,0 +1,115 @@ +@@ -0,0 +1,307 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * @@ -2723,8 +4067,24 @@ Signed-off-by: Biwen Li +}; + +&soc { ++/delete-property/ dma-coherent; ++ +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" ++ ++pcie@3400000 { ++ /delete-property/ iommu-map; ++}; ++ ++pcie@3500000 { ++ /delete-property/ iommu-map; ++}; ++ ++pcie@3600000 { ++ /delete-property/ iommu-map; ++}; ++ ++/delete-node/ iommu@9000000; +}; + +&fsldpaa { @@ -2774,65 +4134,245 @@ Signed-off-by: Biwen Li + * phy-handle = <&pcsphy7>; + *}; +*/ ---- /dev/null -+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts -@@ -0,0 +1,110 @@ -+/* -+ * Device Tree Include file for Freescale Layerscape-1046A family SoC. -+ * -+ * Copyright (C) 2016, Freescale Semiconductor -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ + -+#include "fsl-ls1046a-rdb-sdk.dts" ++&clockgen { ++ dma-coherent; ++}; + -+&soc { -+ bp7: buffer-pool@7 { -+ compatible = "fsl,ls1046a-bpool", "fsl,bpool"; -+ fsl,bpid = <7>; -+ fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>; -+ fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>; -+ }; ++&scfg { ++ dma-coherent; ++}; + -+ bp8: buffer-pool@8 { -+ compatible = "fsl,ls1046a-bpool", "fsl,bpool"; -+ fsl,bpid = <8>; -+ fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>; -+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; -+ }; ++&crypto { ++ dma-coherent; ++}; + -+ bp9: buffer-pool@9 { -+ compatible = "fsl,ls1046a-bpool", "fsl,bpool"; -+ fsl,bpid = <9>; -+ fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>; -+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; -+ }; ++&dcfg { ++ dma-coherent; ++}; + -+ fsl,dpaa { -+ compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus"; ++&ifc { ++ dma-coherent; ++}; + -+ ethernet@2 { -+ compatible = "fsl,dpa-ethernet-init"; -+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; -+ fsl,qman-frame-queues-rx = <0x54 1 0x55 1>; -+ fsl,qman-frame-queues-tx = <0x74 1 0x75 1>; -+ }; ++&qspi { ++ dma-coherent; ++}; + -+ ethernet@3 { -+ compatible = "fsl,dpa-ethernet-init"; -+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; -+ fsl,qman-frame-queues-rx = <0x56 1 0x57 1>; -+ fsl,qman-frame-queues-tx = <0x76 1 0x77 1>; -+ }; ++&esdhc { ++ dma-coherent; ++}; + -+ ethernet@4 { -+ compatible = "fsl,dpa-ethernet-init"; -+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; -+ fsl,qman-frame-queues-rx = <0x58 1 0x59 1>; -+ fsl,qman-frame-queues-tx = <0x78 1 0x79 1>; ++&ddr { ++ dma-coherent; ++}; ++ ++&tmu { ++ dma-coherent; ++}; ++ ++&qman { ++ dma-coherent; ++}; ++ ++&bman { ++ dma-coherent; ++}; ++ ++&bportals { ++ dma-coherent; ++}; ++ ++&qportals { ++ dma-coherent; ++}; ++ ++&dspi { ++ dma-coherent; ++}; ++ ++&i2c0 { ++ dma-coherent; ++}; ++ ++&i2c1 { ++ dma-coherent; ++}; ++ ++&i2c2 { ++ dma-coherent; ++}; ++ ++&i2c3 { ++ dma-coherent; ++}; ++ ++&duart0 { ++ dma-coherent; ++}; ++ ++&duart1 { ++ dma-coherent; ++}; ++ ++&duart2 { ++ dma-coherent; ++}; ++ ++&duart3 { ++ dma-coherent; ++}; ++ ++&gpio0 { ++ dma-coherent; ++}; ++ ++&gpio1 { ++ dma-coherent; ++}; ++ ++&gpio2 { ++ dma-coherent; ++}; ++ ++&gpio3 { ++ dma-coherent; ++}; ++ ++&lpuart0 { ++ dma-coherent; ++}; ++ ++&lpuart1 { ++ dma-coherent; ++}; ++ ++&lpuart2 { ++ dma-coherent; ++}; ++ ++&lpuart3 { ++ dma-coherent; ++}; ++ ++&lpuart4 { ++ dma-coherent; ++}; ++ ++&lpuart5 { ++ dma-coherent; ++}; ++ ++&ftm0 { ++ dma-coherent; ++}; ++ ++&wdog0 { ++ dma-coherent; ++}; ++ ++&edma0 { ++ dma-coherent; ++}; ++ ++&sata { ++ dma-coherent; ++}; ++ ++&qdma { ++ dma-coherent; ++}; ++ ++&msi1 { ++ dma-coherent; ++}; ++ ++&msi2 { ++ dma-coherent; ++}; ++ ++&msi3 { ++ dma-coherent; ++}; ++ ++&fman0 { ++ dma-coherent; ++}; ++ ++&ptp_timer0 { ++ dma-coherent; ++}; ++ ++&serdes1 { ++ dma-coherent; ++}; ++ ++&fsldpaa { ++ dma-coherent; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts +@@ -0,0 +1,133 @@ ++/* ++ * Device Tree Include file for Freescale Layerscape-1046A family SoC. ++ * ++ * Copyright (C) 2016, Freescale Semiconductor ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include "fsl-ls1046a-rdb-sdk.dts" ++ ++&soc { ++ bp7: buffer-pool@7 { ++ compatible = "fsl,ls1046a-bpool", "fsl,bpool"; ++ fsl,bpid = <7>; ++ fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>; ++ fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>; ++ dma-coherent; ++ }; ++ ++ bp8: buffer-pool@8 { ++ compatible = "fsl,ls1046a-bpool", "fsl,bpool"; ++ fsl,bpid = <8>; ++ fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>; ++ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; ++ dma-coherent; ++ }; ++ ++ bp9: buffer-pool@9 { ++ compatible = "fsl,ls1046a-bpool", "fsl,bpool"; ++ fsl,bpid = <9>; ++ fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>; ++ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; ++ dma-coherent; ++ }; ++ ++ fsl,dpaa { ++ compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus"; ++ dma-coherent; ++ ++ ethernet@2 { ++ compatible = "fsl,dpa-ethernet-init"; ++ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; ++ fsl,qman-frame-queues-rx = <0x54 1 0x55 1>; ++ fsl,qman-frame-queues-tx = <0x74 1 0x75 1>; ++ }; ++ ++ ethernet@3 { ++ compatible = "fsl,dpa-ethernet-init"; ++ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; ++ fsl,qman-frame-queues-rx = <0x56 1 0x57 1>; ++ fsl,qman-frame-queues-tx = <0x76 1 0x77 1>; ++ }; ++ ++ ethernet@4 { ++ compatible = "fsl,dpa-ethernet-init"; ++ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; ++ fsl,qman-frame-queues-rx = <0x58 1 0x59 1>; ++ fsl,qman-frame-queues-tx = <0x78 1 0x79 1>; + }; + + ethernet@5 { @@ -2864,6 +4404,20 @@ Signed-off-by: Biwen Li + fsl,fman-oh-port = <&fman0_oh2>; + }; + }; ++ ++ pcie@3400000 { ++ /delete-property/ iommu-map; ++ }; ++ ++ pcie@3500000 { ++ /delete-property/ iommu-map; ++ }; ++ ++ pcie@3600000 { ++ /delete-property/ iommu-map; ++ }; ++ ++ /delete-node/ iommu@9000000; +}; +/ { + reserved-memory { @@ -2871,11 +4425,16 @@ Signed-off-by: Biwen Li + #size-cells = <2>; + ranges; + ++ /* For legacy usdpaa based use-cases, update the size and ++ alignment parameters. e.g. to allocate 256 MB memory: ++ size = <0 0x10000000>; ++ alignment = <0 0x10000000>; ++ */ + usdpaa_mem: usdpaa_mem { + compatible = "fsl,usdpaa-mem"; + alloc-ranges = <0 0 0x10000 0>; -+ size = <0 0x10000000>; -+ alignment = <0 0x10000000>; ++ size = <0 0x1000>; ++ alignment = <0 0x1000>; + }; + }; +}; @@ -2938,7 +4497,7 @@ Signed-off-by: Biwen Li */ /dts-v1/; -@@ -139,6 +102,7 @@ +@@ -139,21 +102,26 @@ num-cs = <2>; bus-num = <0>; status = "okay"; @@ -2946,18 +4505,21 @@ Signed-off-by: Biwen Li qflash0: s25fs512s@0 { compatible = "spansion,m25p80"; -@@ -146,6 +110,8 @@ + #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; +- spi-max-frequency = <20000000>; ++ spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; qflash1: s25fs512s@1 { -@@ -154,6 +120,8 @@ + compatible = "spansion,m25p80"; + #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; +- spi-max-frequency = <20000000>; ++ spi-max-frequency = <50000000>; reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; @@ -3015,6 +4577,15 @@ Signed-off-by: Biwen Li */ #include +@@ -70,7 +33,7 @@ + #address-cells = <1>; + #size-cells = <0>; + +- cpu0: cpu@0 { ++ cooling_map0: cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; @@ -122,7 +85,7 @@ CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; @@ -3024,7 +4595,16 @@ Signed-off-by: Biwen Li entry-latency-us = <1000>; exit-latency-us = <1000>; min-residency-us = <3000>; -@@ -214,7 +177,6 @@ +@@ -188,6 +151,8 @@ + #address-cells = <2>; + #size-cells = <2>; + ranges; ++ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; ++ dma-coherent; + + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; +@@ -214,7 +179,6 @@ clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; big-endian; @@ -3032,7 +4612,57 @@ Signed-off-by: Biwen Li status = "disabled"; }; -@@ -304,7 +266,7 @@ +@@ -229,6 +193,49 @@ + bus-width = <4>; + }; + ++ smmu: iommu@9000000 { ++ compatible = "arm,mmu-500"; ++ reg = <0 0x9000000 0 0x400000>; ++ dma-coherent; ++ stream-match-mask = <0x7f00>; ++ #global-interrupts = <2>; ++ #iommu-cells = <1>; ++ interrupts = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ }; ++ + scfg: scfg@1570000 { + compatible = "fsl,ls1046a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; +@@ -304,7 +311,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; @@ -3041,7 +4671,45 @@ Signed-off-by: Biwen Li big-endian; }; -@@ -407,7 +369,7 @@ +@@ -362,36 +369,7 @@ + #thermal-sensor-cells = <1>; + }; + +- thermal-zones { +- cpu_thermal: cpu-thermal { +- polling-delay-passive = <1000>; +- polling-delay = <5000>; +- thermal-sensors = <&tmu 3>; +- +- trips { +- cpu_alert: cpu-alert { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- +- cpu_crit: cpu-crit { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "critical"; +- }; +- }; +- +- cooling-maps { +- map0 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu0 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- }; +- }; +- }; ++ #include "fsl-tmu.dtsi" + + dspi: dspi@2100000 { + compatible = "fsl,ls1021a-v1.0-dspi"; +@@ -407,7 +385,7 @@ }; i2c0: i2c@2180000 { @@ -3050,15 +4718,15 @@ Signed-off-by: Biwen Li #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; -@@ -416,6 +378,7 @@ +@@ -416,6 +394,7 @@ dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; -+ fsl-scl-gpio = <&gpio3 12 0>; ++ scl-gpios = <&gpio3 12 0>; status = "disabled"; }; -@@ -440,12 +403,13 @@ +@@ -440,12 +419,13 @@ }; i2c3: i2c@21b0000 { @@ -3069,11 +4737,11 @@ Signed-off-by: Biwen Li reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = ; clocks = <&clockgen 4 1>; -+ fsl-scl-gpio = <&gpio3 12 0>; ++ scl-gpios = <&gpio3 12 0>; status = "disabled"; }; -@@ -571,6 +535,15 @@ +@@ -571,6 +551,15 @@ status = "disabled"; }; @@ -3089,40 +4757,100 @@ Signed-off-by: Biwen Li wdog0: watchdog@2ad0000 { compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; -@@ -602,6 +575,9 @@ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb1: usb@3000000 { -@@ -611,6 +587,9 @@ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - usb2: usb@3100000 { -@@ -620,6 +599,9 @@ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; -+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - - sata: sata@3200000 { -@@ -631,6 +613,27 @@ - clocks = <&clockgen 4 1>; +@@ -595,40 +584,81 @@ + <&clockgen 4 1>; }; +- usb0: usb@2f00000 { +- compatible = "snps,dwc3"; +- reg = <0x0 0x2f00000 0x0 0x10000>; +- interrupts = ; +- dr_mode = "host"; +- snps,quirk-frame-length-adjustment = <0x20>; +- snps,dis_rxdet_inp3_quirk; +- }; +- +- usb1: usb@3000000 { +- compatible = "snps,dwc3"; +- reg = <0x0 0x3000000 0x0 0x10000>; +- interrupts = ; +- dr_mode = "host"; +- snps,quirk-frame-length-adjustment = <0x20>; +- snps,dis_rxdet_inp3_quirk; +- }; +- +- usb2: usb@3100000 { +- compatible = "snps,dwc3"; +- reg = <0x0 0x3100000 0x0 0x10000>; +- interrupts = ; +- dr_mode = "host"; +- snps,quirk-frame-length-adjustment = <0x20>; +- snps,dis_rxdet_inp3_quirk; +- }; +- +- sata: sata@3200000 { +- compatible = "fsl,ls1046a-ahci"; +- reg = <0x0 0x3200000 0x0 0x10000>, +- <0x0 0x20140520 0x0 0x4>; +- reg-names = "ahci", "sata-ecc"; +- interrupts = ; +- clocks = <&clockgen 4 1>; ++ aux_bus: aux_bus { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ compatible = "simple-bus"; ++ ranges; ++ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; ++ ++ usb0: usb@2f00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x2f00000 0x0 0x10000>; ++ interrupts = ; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ usb3-lpm-capable; ++ snps,dis-u1u2-when-u3-quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ }; ++ ++ usb1: usb@3000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3000000 0x0 0x10000>; ++ interrupts = ; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ usb3-lpm-capable; ++ snps,dis-u1u2-when-u3-quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ }; ++ ++ usb2: usb@3100000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3100000 0x0 0x10000>; ++ interrupts = ; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ usb3-lpm-capable; ++ snps,dis-u1u2-when-u3-quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ }; ++ ++ sata: sata@3200000 { ++ compatible = "fsl,ls1046a-ahci"; ++ reg = <0x0 0x3200000 0x0 0x10000>, ++ <0x0 0x20140520 0x0 0x4>; ++ reg-names = "ahci", "sata-ecc"; ++ interrupts = ; ++ clocks = <&clockgen 4 1>; ++ }; ++ }; ++ + qdma: qdma@8380000 { + compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ @@ -3142,12 +4870,10 @@ Signed-off-by: Biwen Li + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; -+ }; -+ + }; + msi1: msi-controller@1580000 { - compatible = "fsl,ls1046a-msi"; - msi-controller; -@@ -661,6 +664,92 @@ +@@ -661,6 +691,125 @@ ; }; @@ -3163,9 +4889,8 @@ Signed-off-by: Biwen Li + #size-cells = <2>; + device_type = "pci"; + dma-coherent; ++ iommu-map = <0 &smmu 0 1>; + num-lanes = <4>; -+ num-ib-windows = <6>; -+ num-ob-windows = <6>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -3176,6 +4901,18 @@ Signed-off-by: Biwen Li + <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3400000 { ++ compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; ++ reg = <0x00 0x03400000 0x0 0x00100000 ++ 0x40 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ib-windows = <6>; ++ num-ob-windows = <8>; ++ num-lanes = <2>; ++ status = "disabled"; + }; + + pcie@3500000 { @@ -3190,9 +4927,8 @@ Signed-off-by: Biwen Li + #size-cells = <2>; + device_type = "pci"; + dma-coherent; ++ iommu-map = <0 &smmu 0 1>; + num-lanes = <2>; -+ num-ib-windows = <6>; -+ num-ob-windows = <6>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -3203,6 +4939,18 @@ Signed-off-by: Biwen Li + <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3500000 { ++ compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; ++ reg = <0x00 0x03500000 0x0 0x00100000 ++ 0x48 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ib-windows = <6>; ++ num-ob-windows = <8>; ++ num-lanes = <2>; ++ status = "disabled"; + }; + + pcie@3600000 { @@ -3217,9 +4965,8 @@ Signed-off-by: Biwen Li + #size-cells = <2>; + device_type = "pci"; + dma-coherent; ++ iommu-map = <0 &smmu 0 1>; + num-lanes = <2>; -+ num-ib-windows = <6>; -+ num-ob-windows = <6>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -3230,6 +4977,18 @@ Signed-off-by: Biwen Li + <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3600000 { ++ compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; ++ reg = <0x00 0x03600000 0x0 0x00100000 ++ 0x50 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ib-windows = <6>; ++ num-ob-windows = <8>; ++ num-lanes = <2>; ++ status = "disabled"; + }; + + serdes1: serdes@1ea0000 { @@ -3240,7 +4999,7 @@ Signed-off-by: Biwen Li }; reserved-memory { -@@ -689,6 +778,13 @@ +@@ -689,7 +838,36 @@ no-map; }; }; @@ -3254,6 +5013,29 @@ Signed-off-by: Biwen Li }; #include "qoriq-qman-portals.dtsi" + #include "qoriq-bman-portals.dtsi" ++ ++&thermal_zones { ++ thermal-zone0 { ++ status = "okay"; ++ }; ++ ++ thermal-zone1 { ++ status = "okay"; ++ }; ++ ++ thermal-zone2 { ++ status = "okay"; ++ }; ++ ++ thermal-zone3 { ++ status = "okay"; ++ }; ++ ++ thermal-zone4 { ++ status = "okay"; ++ }; ++}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -1,3 +1,4 @@ @@ -3598,8 +5380,26 @@ Signed-off-by: Biwen Li */ #include #include -@@ -130,7 +94,7 @@ - CPU_PH20: cpu-ph20 { +@@ -61,7 +25,7 @@ + #size-cells = <0>; + + /* We have 2 clusters having 4 Cortex-A53 cores each */ +- cpu0: cpu@0 { ++ cooling_map0: cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; +@@ -94,7 +58,7 @@ + cpu-idle-states = <&CPU_PH20>; + }; + +- cpu4: cpu@100 { ++ cooling_map1: cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; +@@ -130,7 +94,7 @@ + CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; @@ -3655,7 +5455,52 @@ Signed-off-by: Biwen Li clockgen: clocking@1300000 { compatible = "fsl,ls1088a-clockgen"; -@@ -283,6 +276,62 @@ +@@ -229,43 +222,7 @@ + #thermal-sensor-cells = <1>; + }; + +- thermal-zones { +- cpu_thermal: cpu-thermal { +- polling-delay-passive = <1000>; +- polling-delay = <5000>; +- thermal-sensors = <&tmu 0>; +- +- trips { +- cpu_alert: cpu-alert { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- +- cpu_crit: cpu-crit { +- temperature = <95000>; +- hysteresis = <2000>; +- type = "critical"; +- }; +- }; +- +- cooling-maps { +- map0 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu0 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- +- map1 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu4 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- }; +- }; +- }; ++ #include "fsl-tmu.dtsi" + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; +@@ -283,6 +240,62 @@ status = "disabled"; }; @@ -3718,7 +5563,7 @@ Signed-off-by: Biwen Li gpio0: gpio@2300000 { compatible = "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; -@@ -323,6 +372,72 @@ +@@ -323,6 +336,72 @@ #interrupt-cells = <2>; }; @@ -3791,7 +5636,7 @@ Signed-off-by: Biwen Li ifc: ifc@2240000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x2240000 0x0 0x20000>; -@@ -333,13 +448,22 @@ +@@ -333,13 +412,22 @@ status = "disabled"; }; @@ -3812,11 +5657,11 @@ Signed-off-by: Biwen Li interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; -+ fsl-scl-gpio = <&gpio3 30 0>; ++ scl-gpios = <&gpio3 30 0>; status = "disabled"; }; -@@ -349,7 +473,7 @@ +@@ -349,7 +437,7 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; @@ -3825,7 +5670,7 @@ Signed-off-by: Biwen Li status = "disabled"; }; -@@ -359,7 +483,7 @@ +@@ -359,7 +447,7 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; @@ -3834,7 +5679,7 @@ Signed-off-by: Biwen Li status = "disabled"; }; -@@ -369,7 +493,7 @@ +@@ -369,7 +457,7 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; @@ -3843,7 +5688,7 @@ Signed-off-by: Biwen Li status = "disabled"; }; -@@ -385,6 +509,26 @@ +@@ -385,6 +473,28 @@ status = "disabled"; }; @@ -3855,6 +5700,7 @@ Signed-off-by: Biwen Li + configure-gfladj; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; + }; + + usb1: usb3@3110000 { @@ -3865,12 +5711,13 @@ Signed-off-by: Biwen Li + configure-gfladj; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; + }; + sata: sata@3200000 { compatible = "fsl,ls1088a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, -@@ -395,6 +539,17 @@ +@@ -395,6 +505,17 @@ dma-coherent; status = "disabled"; }; @@ -3888,7 +5735,7 @@ Signed-off-by: Biwen Li crypto: crypto@8000000 { compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; -@@ -434,6 +589,251 @@ +@@ -434,6 +555,267 @@ interrupts = ; }; }; @@ -3916,6 +5763,7 @@ Signed-off-by: Biwen Li + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; + }; + + pcie@3500000 { @@ -3941,6 +5789,7 @@ Signed-off-by: Biwen Li + <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; + }; + + pcie@3600000 { @@ -3966,6 +5815,7 @@ Signed-off-by: Biwen Li + <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; + }; + + fsl_mc: fsl-mc@80c000000 { @@ -4128,8 +5978,9 @@ Signed-off-by: Biwen Li + }; + + serdes1: serdes@1ea0000 { -+ reg = <0x0 0x1ea0000 0 0x00002000>; + compatible = "fsl,serdes-10g"; ++ reg = <0x0 0x1ea0000 0 0x00002000>; ++ little-endian; + }; }; @@ -4138,6 +5989,18 @@ Signed-off-by: Biwen Li + compatible = "linaro,optee-tz"; + method = "smc"; + }; ++ }; ++}; ++ ++#include "fsl-tmu-map1.dtsi" ++ ++&thermal_zones { ++ thermal-zone0 { ++ status = "okay"; ++ }; ++ ++ thermal-zone1 { ++ status = "okay"; + }; }; --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -4450,7 +6313,7 @@ Signed-off-by: Biwen Li /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * -@@ -6,43 +7,6 @@ +@@ -6,49 +7,12 @@ * Abhimanyu Saini * Bhupesh Sharma * @@ -4494,6 +6357,40 @@ Signed-off-by: Biwen Li */ #include "fsl-ls208xa.dtsi" + + &cpu { +- cpu0: cpu@0 { ++ cooling_map0: cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0>; +@@ -67,7 +31,7 @@ + next-level-cache = <&cluster0_l2>; + }; + +- cpu2: cpu@100 { ++ cooling_map1: cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; +@@ -86,7 +50,7 @@ + next-level-cache = <&cluster1_l2>; + }; + +- cpu4: cpu@200 { ++ cooling_map2: cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x200>; +@@ -105,7 +69,7 @@ + next-level-cache = <&cluster2_l2>; + }; + +- cpu6: cpu@300 { ++ cooling_map3: cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x300>; @@ -150,6 +114,10 @@ }; }; @@ -4988,7 +6885,7 @@ Signed-off-by: Biwen Li /* * Device Tree Include file for Freescale Layerscape-2088A family SoC. * -@@ -6,43 +7,6 @@ +@@ -6,49 +7,12 @@ * * Abhimanyu Saini * @@ -5032,6 +6929,40 @@ Signed-off-by: Biwen Li */ #include "fsl-ls208xa.dtsi" + + &cpu { +- cpu0: cpu@0 { ++ cooling_map0: cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; +@@ -67,7 +31,7 @@ + next-level-cache = <&cluster0_l2>; + }; + +- cpu2: cpu@100 { ++ cooling_map1: cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; +@@ -86,7 +50,7 @@ + next-level-cache = <&cluster1_l2>; + }; + +- cpu4: cpu@200 { ++ cooling_map2: cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; +@@ -105,7 +69,7 @@ + next-level-cache = <&cluster2_l2>; + }; + +- cpu6: cpu@300 { ++ cooling_map3: cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; @@ -143,7 +107,7 @@ CPU_PW20: cpu-pw20 { compatible = "arm,idle-state"; @@ -5314,7 +7245,63 @@ Signed-off-by: Biwen Li clockgen: clocking@1300000 { compatible = "fsl,ls2080a-clockgen"; -@@ -357,6 +321,8 @@ +@@ -194,54 +158,7 @@ + #thermal-sensor-cells = <1>; + }; + +- thermal-zones { +- cpu_thermal: cpu-thermal { +- polling-delay-passive = <1000>; +- polling-delay = <5000>; +- +- thermal-sensors = <&tmu 4>; +- +- trips { +- cpu_alert: cpu-alert { +- temperature = <75000>; +- hysteresis = <2000>; +- type = "passive"; +- }; +- cpu_crit: cpu-crit { +- temperature = <85000>; +- hysteresis = <2000>; +- type = "critical"; +- }; +- }; +- +- cooling-maps { +- map0 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu0 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- map1 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu2 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- map2 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu4 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- map3 { +- trip = <&cpu_alert>; +- cooling-device = +- <&cpu6 THERMAL_NO_LIMIT +- THERMAL_NO_LIMIT>; +- }; +- }; +- }; +- }; ++ #include "fsl-tmu.dtsi" + + serial0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; +@@ -357,6 +274,8 @@ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ msi-parent = <&its>; @@ -5323,7 +7310,7 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <1>; -@@ -460,6 +426,8 @@ +@@ -460,6 +379,8 @@ compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; #global-interrupts = <12>; @@ -5332,7 +7319,7 @@ Signed-off-by: Biwen Li interrupts = <0 13 4>, /* global secure fault */ <0 14 4>, /* combined secure interrupt */ <0 15 4>, /* global non-secure fault */ -@@ -502,7 +470,6 @@ +@@ -502,7 +423,6 @@ <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>, <0 208 4>, <0 209 4>; @@ -5340,7 +7327,7 @@ Signed-off-by: Biwen Li }; dspi: dspi@2100000 { -@@ -574,15 +541,126 @@ +@@ -574,15 +494,126 @@ #interrupt-cells = <2>; }; @@ -5465,11 +7452,11 @@ Signed-off-by: Biwen Li clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 1>; -+ fsl-scl-gpio = <&gpio3 10 0>; ++ scl-gpios = <&gpio3 10 0>; }; i2c1: i2c@2010000 { -@@ -593,7 +671,7 @@ +@@ -593,7 +624,7 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 0x4>; /* Level high type */ clock-names = "i2c"; @@ -5478,7 +7465,7 @@ Signed-off-by: Biwen Li }; i2c2: i2c@2020000 { -@@ -604,7 +682,7 @@ +@@ -604,7 +635,7 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; @@ -5487,7 +7474,7 @@ Signed-off-by: Biwen Li }; i2c3: i2c@2030000 { -@@ -615,7 +693,7 @@ +@@ -615,7 +646,7 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; @@ -5496,7 +7483,7 @@ Signed-off-by: Biwen Li }; ifc: ifc@2240000 { -@@ -648,8 +726,8 @@ +@@ -648,8 +679,8 @@ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; @@ -5507,7 +7494,7 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -@@ -657,6 +735,7 @@ +@@ -657,20 +688,22 @@ num-lanes = <4>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -5515,7 +7502,13 @@ Signed-off-by: Biwen Li #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, -@@ -669,8 +748,8 @@ + <0000 0 0 2 &gic 0 0 0 110 4>, + <0000 0 0 3 &gic 0 0 0 111 4>, + <0000 0 0 4 &gic 0 0 0 112 4>; ++ status = "disabled"; + }; + + pcie2: pcie@3500000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; @@ -5526,7 +7519,7 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -@@ -678,6 +757,7 @@ +@@ -678,20 +711,22 @@ num-lanes = <4>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -5534,7 +7527,13 @@ Signed-off-by: Biwen Li #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, -@@ -690,8 +770,8 @@ + <0000 0 0 2 &gic 0 0 0 115 4>, + <0000 0 0 3 &gic 0 0 0 116 4>, + <0000 0 0 4 &gic 0 0 0 117 4>; ++ status = "disabled"; + }; + + pcie3: pcie@3600000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; @@ -5545,7 +7544,7 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -@@ -699,6 +779,7 @@ +@@ -699,20 +734,22 @@ num-lanes = <8>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -5553,7 +7552,13 @@ Signed-off-by: Biwen Li #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, -@@ -711,8 +792,8 @@ + <0000 0 0 2 &gic 0 0 0 120 4>, + <0000 0 0 3 &gic 0 0 0 121 4>, + <0000 0 0 4 &gic 0 0 0 122 4>; ++ status = "disabled"; + }; + + pcie4: pcie@3700000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; @@ -5564,7 +7569,7 @@ Signed-off-by: Biwen Li #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -@@ -720,6 +801,7 @@ +@@ -720,12 +757,14 @@ num-lanes = <4>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -5572,28 +7577,38 @@ Signed-off-by: Biwen Li #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, -@@ -754,6 +836,7 @@ + <0000 0 0 2 &gic 0 0 0 125 4>, + <0000 0 0 3 &gic 0 0 0 126 4>, + <0000 0 0 4 &gic 0 0 0 127 4>; ++ status = "disabled"; + }; + + sata0: sata@3200000 { +@@ -754,6 +793,8 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; }; usb1: usb3@3110000 { -@@ -764,6 +847,12 @@ +@@ -764,6 +805,14 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; + }; + + serdes1: serdes@1ea0000 { -+ reg = <0x0 0x1ea0000 0 0x00002000>; + compatible = "fsl,serdes-10g"; ++ reg = <0x0 0x1ea0000 0 0x00002000>; ++ little-endian; }; ccn@4000000 { -@@ -771,6 +860,14 @@ +@@ -771,6 +820,14 @@ reg = <0x0 0x04000000 0x0 0x01000000>; interrupts = <0 12 4>; }; @@ -5608,7 +7623,7 @@ Signed-off-by: Biwen Li }; ddr1: memory-controller@1080000 { -@@ -786,4 +883,11 @@ +@@ -786,4 +843,44 @@ interrupts = <0 18 0x4>; little-endian; }; @@ -5619,624 +7634,2518 @@ Signed-off-by: Biwen Li + method = "smc"; + }; + }; - }; ---- /dev/null -+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi -@@ -0,0 +1,55 @@ -+/* -+ * QorIQ BMan SDK Portals device tree nodes -+ * -+ * Copyright 2011-2016 Freescale Semiconductor Inc. -+ * Copyright 2017 NXP -+ * -+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -+ */ ++}; + -+&bportals { -+ bman-portal@0 { -+ cell-index = <0>; ++#include "fsl-tmu-map1.dtsi" ++#include "fsl-tmu-map2.dtsi" ++#include "fsl-tmu-map3.dtsi" ++&thermal_zones { ++ thermal-zone1 { ++ status = "okay"; + }; + -+ bman-portal@10000 { -+ cell-index = <1>; ++ thermal-zone2{ ++ status = "okay"; + }; + -+ bman-portal@20000 { -+ cell-index = <2>; ++ thermal-zone3{ ++ status = "okay"; + }; + -+ bman-portal@30000 { -+ cell-index = <3>; ++ thermal-zone4{ ++ status = "okay"; + }; + -+ bman-portal@40000 { -+ cell-index = <4>; ++ thermal-zone5{ ++ status = "okay"; + }; + -+ bman-portal@50000 { -+ cell-index = <5>; ++ thermal-zone6{ ++ status = "okay"; + }; + -+ bman-portal@60000 { -+ cell-index = <6>; ++ thermal-zone7 { ++ status = "okay"; + }; + }; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +@@ -0,0 +1,353 @@ ++// SPDX-License-Identifier: (GPL-2.0 OR MIT) ++// ++// Device Tree file for LX2160AQDS ++// ++// Copyright 2018 NXP + -+ bman-portal@70000 { -+ cell-index = <7>; ++/dts-v1/; ++ ++#include "fsl-lx2160a.dtsi" ++ ++/ { ++ model = "NXP Layerscape LX2160AQDS"; ++ compatible = "fsl,lx2160a-qds", "fsl,lx2160a"; ++ ++ aliases { ++ crypto = &crypto; ++ serial0 = &uart0; + }; + -+ bman-portal@80000 { -+ cell-index = <8>; ++ chosen { ++ stdout-path = "serial0:115200n8"; + }; + -+ bman-portal@90000 { -+ cell-index = <9>; ++ sb_3v3: regulator-sb3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "MC34717-3.3VSB"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; + }; + -+ bman-bpids@0 { -+ compatible = "fsl,bpid-range"; -+ fsl,bpid-range = <32 32>; ++ mdio-mux-1 { ++ compatible = "mdio-mux-multiplexer"; ++ mux-controls = <&mux 0>; ++ mdio-parent-bus = <&emdio1>; ++ #address-cells=<1>; ++ #size-cells = <0>; ++ ++ mdio@0 { /* On-board PHY #1 RGMI1*/ ++ reg = <0x00>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@8 { /* On-board PHY #2 RGMI2*/ ++ reg = <0x8>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@18 { /* Slot #1 */ ++ reg = <0x18>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@19 { /* Slot #2 */ ++ reg = <0x19>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@1a { /* Slot #3 */ ++ reg = <0x1a>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@1b { /* Slot #4 */ ++ reg = <0x1b>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@1c { /* Slot #5 */ ++ reg = <0x1c>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@1d { /* Slot #6 */ ++ reg = <0x1d>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@1e { /* Slot #7 */ ++ reg = <0x1e>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@1f { /* Slot #8 */ ++ reg = <0x1f>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++ ++ mdio-mux-2 { ++ compatible = "mdio-mux-multiplexer"; ++ mux-controls = <&mux 1>; ++ mdio-parent-bus = <&emdio2>; ++ #address-cells=<1>; ++ #size-cells = <0>; ++ ++ mdio@0 { /* Slot #1 (secondary EMI) */ ++ reg = <0x00>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@1 { /* Slot #2 (secondary EMI) */ ++ reg = <0x01>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@2 { /* Slot #3 (secondary EMI) */ ++ reg = <0x02>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@3 { /* Slot #4 (secondary EMI) */ ++ reg = <0x03>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@4 { /* Slot #5 (secondary EMI) */ ++ reg = <0x04>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@5 { /* Slot #6 (secondary EMI) */ ++ reg = <0x05>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@6 { /* Slot #7 (secondary EMI) */ ++ reg = <0x06>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mdio@7 { /* Slot #8 (secondary EMI) */ ++ reg = <0x07>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; + }; +}; ---- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi -@@ -1,9 +1,9 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ BMan Portals device tree - * - * Copyright 2011-2016 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - &bportals { -@@ -68,4 +68,10 @@ - reg = <0x80000 0x4000>, <0x4080000 0x4000>; - interrupts = ; - }; + -+ bman-portal@90000 { -+ compatible = "fsl,bman-portal"; -+ reg = <0x90000 0x4000>, <0x4090000 0x4000>; -+ interrupts = ; ++&crypto { ++ status = "okay"; ++}; ++ ++&dspi0 { ++ status = "okay"; ++ ++ dflash0: flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <1000000>; + }; - }; ---- /dev/null -+++ b/arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi -@@ -0,0 +1,97 @@ -+/* -+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ] -+ * -+ * Copyright 2012 - 2015 Freescale Semiconductor Inc. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Freescale Semiconductor nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") as published by the Free Software -+ * Foundation, either version 2 of that License or (at your option) any -+ * later version. -+ * -+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY -+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ ++}; + -+fsldpaa: fsl,dpaa { -+ compatible = "fsl,ls1043a-dpaa", "simple-bus", "fsl,dpaa"; -+ ethernet@0 { -+ compatible = "fsl,dpa-ethernet"; -+ fsl,fman-mac = <&enet0>; -+ dma-coherent; ++&dspi1 { ++ status = "okay"; ++ ++ dflash1: flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <1000000>; + }; -+ ethernet@1 { -+ compatible = "fsl,dpa-ethernet"; -+ fsl,fman-mac = <&enet1>; -+ dma-coherent; ++}; ++ ++&dspi2 { ++ status = "okay"; ++ ++ dflash2: flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <1000000>; + }; -+ ethernet@2 { -+ compatible = "fsl,dpa-ethernet"; -+ fsl,fman-mac = <&enet2>; -+ dma-coherent; ++}; ++ ++&emdio1 { ++ status = "okay"; ++}; ++ ++&emdio2 { ++ status = "okay"; ++}; ++ ++&esdhc0 { ++ status = "okay"; ++}; ++ ++&esdhc1 { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ fpga@66 { ++ compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", ++ "simple-mfd"; ++ reg = <0x66>; ++ ++ mux: mux-controller { ++ compatible = "reg-mux"; ++ #mux-control-cells = <1>; ++ mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ ++ <0x54 0x07>; /* 1: reg 0x54, bit 2:0 */ ++ }; + }; -+ ethernet@3 { -+ compatible = "fsl,dpa-ethernet"; -+ fsl,fman-mac = <&enet3>; -+ dma-coherent; ++ ++ i2c-mux@77 { ++ compatible = "nxp,pca9547"; ++ reg = <0x77>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x2>; ++ ++ power-monitor@40 { ++ compatible = "ti,ina220"; ++ reg = <0x40>; ++ shunt-resistor = <500>; ++ }; ++ ++ power-monitor@41 { ++ compatible = "ti,ina220"; ++ reg = <0x41>; ++ shunt-resistor = <1000>; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x3>; ++ ++ temperature-sensor@4c { ++ compatible = "nxp,sa56004"; ++ reg = <0x4c>; ++ vcc-supply = <&sb_3v3>; ++ }; ++ ++ temperature-sensor@4d { ++ compatible = "nxp,sa56004"; ++ reg = <0x4d>; ++ vcc-supply = <&sb_3v3>; ++ }; ++ ++ rtc@51 { ++ compatible = "nxp,pcf2129"; ++ reg = <0x51>; ++ }; ++ }; + }; -+ ethernet@4 { -+ compatible = "fsl,dpa-ethernet"; -+ fsl,fman-mac = <&enet4>; -+ dma-coherent; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&uart1 { ++ status = "okay"; ++}; ++ ++&usb0 { ++ status = "okay"; ++}; ++ ++&usb1 { ++ status = "okay"; ++}; ++ ++&pcs_mdio1 { ++ pcs_phy1: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ backplane-mode = "40gbase-kr"; ++ reg = <0x0>; ++ fsl,lane-handle = <&serdes1>; ++ fsl,lane-reg = <0xF00 0xE00 0xD00 0xC00>; /* lanes H, G, F, E */ + }; -+ ethernet@5 { -+ compatible = "fsl,dpa-ethernet"; -+ fsl,fman-mac = <&enet5>; -+ dma-coherent; ++}; ++ ++&pcs_mdio2 { ++ pcs_phy2: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ backplane-mode = "40gbase-kr"; ++ reg = <0x0>; ++ fsl,lane-handle = <&serdes1>; ++ fsl,lane-reg = <0xB00 0xA00 0x900 0x800>; /* lanes D, C, B, A */ + }; -+ ethernet@8 { -+ compatible = "fsl,dpa-ethernet"; -+ fsl,fman-mac = <&enet6>; -+ dma-coherent; ++}; ++ ++&pcs_mdio3 { ++ pcs_phy3: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ backplane-mode = "10gbase-kr"; ++ reg = <0x0>; ++ fsl,lane-handle = <&serdes1>; ++ fsl,lane-reg = <0xF00 0x100>; /* lane H */ + }; -+ ethernet@6 { -+ compatible = "fsl,im-ethernet"; -+ fsl,fman-mac = <&enet2>; -+ dma-coherent; -+ fpmevt-sel = <0>; ++}; ++ ++&pcs_mdio4 { ++ pcs_phy4: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ backplane-mode = "10gbase-kr"; ++ reg = <0x0>; ++ fsl,lane-handle = <&serdes1>; ++ fsl,lane-reg = <0xE00 0x100>; /* lane G */ + }; -+ ethernet@7 { -+ compatible = "fsl,im-ethernet"; -+ fsl,fman-mac = <&enet3>; -+ dma-coherent; -+ fpmevt-sel = <1>; ++}; ++ ++/* Update DPMAC connections to 40G backplane PHYs ++ * &dpmac1 { ++ * phy-handle = <&pcs_phy1>; ++ * }; ++ * ++ * &dpmac2 { ++ * phy-handle = <&pcs_phy2>; ++ * }; ++ */ ++ ++/* Update DPMAC connections to 10G backplane PHYs ++ * &dpmac3 { ++ * phy-handle = <&pcs_phy3>; ++ * }; ++ * ++ * &dpmac4 { ++ * phy-handle = <&pcs_phy4>; ++ * }; ++ */ +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +@@ -0,0 +1,233 @@ ++// SPDX-License-Identifier: (GPL-2.0 OR MIT) ++// ++// Device Tree file for LX2160ARDB ++// ++// Copyright 2018 NXP ++ ++/dts-v1/; ++ ++#include "fsl-lx2160a.dtsi" ++ ++/ { ++ model = "NXP Layerscape LX2160ARDB"; ++ compatible = "fsl,lx2160a-rdb", "fsl,lx2160a"; ++ ++ aliases { ++ crypto = &crypto; ++ serial0 = &uart0; + }; -+ ethernet@10 { -+ compatible = "fsl,im-ethernet"; -+ fsl,fman-mac = <&enet4>; -+ dma-coherent; -+ fpmevt-sel = <2>; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; + }; -+ ethernet@11 { -+ compatible = "fsl,im-ethernet"; -+ fsl,fman-mac = <&enet5>; -+ dma-coherent; -+ fpmevt-sel = <3>; ++ ++ sb_3v3: regulator-sb3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "MC34717-3.3VSB"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; + }; +}; + ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi -@@ -1,27 +1,28 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 10g port #0 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x10: port@90000 { - cell-index = <0x10>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx"; - reg = <0x90000 0x1000>; - fsl,fman-10g-port; - }; - - fman0_tx_0x30: port@b0000 { - cell-index = <0x30>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx"; - reg = <0xb0000 0x1000>; - fsl,fman-10g-port; -+ fsl,qman-channel-id = <0x800>; - }; - -- ethernet@f0000 { -+ mac9: ethernet@f0000 { - cell-index = <0x8>; - compatible = "fsl,fman-memac"; - reg = <0xf0000 0x1000>; -@@ -29,7 +30,7 @@ fman@1a00000 { - pcsphy-handle = <&pcsphy6>; - }; - -- mdio@f1000 { -+ mdio9: mdio@f1000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi -@@ -1,27 +1,28 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 10g port #1 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x11: port@91000 { - cell-index = <0x11>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx"; - reg = <0x91000 0x1000>; - fsl,fman-10g-port; - }; - - fman0_tx_0x31: port@b1000 { - cell-index = <0x31>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx"; - reg = <0xb1000 0x1000>; - fsl,fman-10g-port; -+ fsl,qman-channel-id = <0x801>; - }; - -- ethernet@f2000 { -+ mac10: ethernet@f2000 { - cell-index = <0x9>; - compatible = "fsl,fman-memac"; - reg = <0xf2000 0x1000>; -@@ -29,7 +30,7 @@ fman@1a00000 { - pcsphy-handle = <&pcsphy7>; - }; - -- mdio@f3000 { -+ mdio10: mdio@f3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi -@@ -1,22 +1,23 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 1g port #0 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x08: port@88000 { - cell-index = <0x8>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; - reg = <0x88000 0x1000>; - }; - - fman0_tx_0x28: port@a8000 { - cell-index = <0x28>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; - reg = <0xa8000 0x1000>; -+ fsl,qman-channel-id = <0x802>; - }; - - ethernet@e0000 { ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi -@@ -1,22 +1,23 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 1g port #1 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x09: port@89000 { - cell-index = <0x9>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; - reg = <0x89000 0x1000>; - }; - - fman0_tx_0x29: port@a9000 { - cell-index = <0x29>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; - reg = <0xa9000 0x1000>; -+ fsl,qman-channel-id = <0x803>; - }; - - ethernet@e2000 { ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi -@@ -1,22 +1,23 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 1g port #2 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x0a: port@8a000 { - cell-index = <0xa>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; - reg = <0x8a000 0x1000>; - }; - - fman0_tx_0x2a: port@aa000 { - cell-index = <0x2a>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; - reg = <0xaa000 0x1000>; -+ fsl,qman-channel-id = <0x804>; - }; - - ethernet@e4000 { ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi -@@ -1,22 +1,23 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 1g port #3 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x0b: port@8b000 { - cell-index = <0xb>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; - reg = <0x8b000 0x1000>; - }; - - fman0_tx_0x2b: port@ab000 { - cell-index = <0x2b>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; - reg = <0xab000 0x1000>; -+ fsl,qman-channel-id = <0x805>; - }; - - ethernet@e6000 { ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi -@@ -1,22 +1,23 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 1g port #4 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x0c: port@8c000 { - cell-index = <0xc>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; - reg = <0x8c000 0x1000>; - }; - - fman0_tx_0x2c: port@ac000 { - cell-index = <0x2c>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; - reg = <0xac000 0x1000>; -+ fsl,qman-channel-id = <0x806>; - }; - - ethernet@e8000 { ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi -@@ -1,22 +1,23 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 1g port #5 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman@1a00000 { - fman0_rx_0x0d: port@8d000 { - cell-index = <0xd>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; - reg = <0x8d000 0x1000>; - }; - - fman0_tx_0x2d: port@ad000 { - cell-index = <0x2d>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; - reg = <0xad000 0x1000>; -+ fsl,qman-channel-id = <0x807>; - }; - - ethernet@ea000 { ++&crypto { ++ status = "okay"; ++}; ++ ++&emdio1 { ++ status = "okay"; ++}; ++ ++&emdio2 { ++ status = "okay"; ++}; ++ ++&esdhc0 { ++ sd-uhs-sdr104; ++ sd-uhs-sdr50; ++ sd-uhs-sdr25; ++ sd-uhs-sdr12; ++ status = "okay"; ++}; ++ ++&esdhc1 { ++ mmc-hs200-1_8v; ++ mmc-hs400-1_8v; ++ bus-width = <8>; ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ i2c-mux@77 { ++ compatible = "nxp,pca9547"; ++ reg = <0x77>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x2>; ++ ++ power-monitor@40 { ++ compatible = "ti,ina220"; ++ reg = <0x40>; ++ shunt-resistor = <1000>; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x3>; ++ ++ temperature-sensor@4c { ++ compatible = "nxp,sa56004"; ++ reg = <0x4c>; ++ vcc-supply = <&sb_3v3>; ++ }; ++ ++ temperature-sensor@4d { ++ compatible = "nxp,sa56004"; ++ reg = <0x4d>; ++ vcc-supply = <&sb_3v3>; ++ }; ++ }; ++ }; ++}; ++ ++&i2c4 { ++ status = "okay"; ++ ++ rtc@51 { ++ compatible = "nxp,pcf2129"; ++ reg = <0x51>; ++ // IRQ10_B ++ interrupts = <0 150 0x4>; ++ }; ++}; ++ ++&fspi { ++ status = "okay"; ++ nxp,fspi-has-second-chip; ++ flash0: mt35xu512aba@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "micron,m25p80"; ++ m25p,fast-read; ++ spi-max-frequency = <50000000>; ++ reg = <0>; ++ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ ++ spi-rx-bus-width = <8>; ++ spi-tx-bus-width = <1>; ++ }; ++ ++ flash1: mt35xu512aba@1 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "micron,m25p80"; ++ m25p,fast-read; ++ spi-max-frequency = <50000000>; ++ reg = <1>; ++ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ ++ spi-rx-bus-width = <8>; ++ spi-tx-bus-width = <1>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&uart1 { ++ status = "okay"; ++}; ++ ++&usb0 { ++ status = "okay"; ++}; ++ ++&usb1 { ++ status = "okay"; ++}; ++ ++&emdio1 { ++ rgmii_phy1: ethernet-phy@1 { ++ /* AR8035 PHY - "compatible" property not strictly needed */ ++ compatible = "ethernet-phy-id004d.d072"; ++ reg = <0x1>; ++ /* Poll mode - no "interrupts" property defined */ ++ }; ++ rgmii_phy2: ethernet-phy@2 { ++ /* AR8035 PHY - "compatible" property not strictly needed */ ++ compatible = "ethernet-phy-id004d.d072"; ++ reg = <0x2>; ++ /* Poll mode - no "interrupts" property defined */ ++ }; ++ aquantia_phy1: ethernet-phy@4 { ++ /* AQR107 PHY - "compatible" property not strictly needed */ ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ reg = <0x4>; ++ /* Poll mode - no "interrupts" property defined */ ++ }; ++ aquantia_phy2: ethernet-phy@5 { ++ /* AQR107 PHY - "compatible" property not strictly needed */ ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ reg = <0x5>; ++ /* Poll mode - no "interrupts" property defined */ ++ }; ++}; ++ ++&emdio2 { ++ inphi_phy: ethernet-phy@0 { ++ compatible = "ethernet-phy-id0210.7440"; ++ reg = <0x0>; ++ }; ++}; ++ ++&dpmac3 { ++ phy-handle = <&aquantia_phy1>; ++ phy-connection-type = "xgmii"; ++}; ++ ++&dpmac4 { ++ phy-handle = <&aquantia_phy2>; ++ phy-connection-type = "xgmii"; ++}; ++ ++&dpmac5 { ++ phy-handle = <&inphi_phy>; ++}; ++ ++&dpmac6 { ++ phy-handle = <&inphi_phy>; ++}; ++ ++&dpmac17 { ++ phy-handle = <&rgmii_phy1>; ++ phy-connection-type = "rgmii-id"; ++}; ++ ++&dpmac18 { ++ phy-handle = <&rgmii_phy2>; ++ phy-connection-type = "rgmii-id"; ++}; ++ ++&sata0 { ++ status = "okay"; ++}; ++ ++&sata1 { ++ status = "okay"; ++}; ++ ++&sata2 { ++ status = "okay"; ++}; ++ ++&sata3 { ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +@@ -0,0 +1,1318 @@ ++// SPDX-License-Identifier: (GPL-2.0 OR MIT) ++// ++// Device Tree Include file for Layerscape-LX2160A family SoC. ++// ++// Copyright 2018 NXP ++ ++#include ++#include ++ ++/memreserve/ 0x80000000 0x00010000; ++ ++/ { ++ compatible = "fsl,lx2160a"; ++ interrupt-parent = <&gic>; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ // 8 clusters having 2 Cortex-A72 cores each ++ cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x0>; ++ clocks = <&clockgen 1 0>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster0_l2>; ++ }; ++ ++ cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x1>; ++ clocks = <&clockgen 1 0>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster0_l2>; ++ }; ++ ++ cpu@100 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x100>; ++ clocks = <&clockgen 1 1>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster1_l2>; ++ }; ++ ++ cpu@101 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x101>; ++ clocks = <&clockgen 1 1>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster1_l2>; ++ }; ++ ++ cpu@200 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x200>; ++ clocks = <&clockgen 1 2>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster2_l2>; ++ }; ++ ++ cpu@201 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x201>; ++ clocks = <&clockgen 1 2>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster2_l2>; ++ }; ++ ++ cpu@300 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x300>; ++ clocks = <&clockgen 1 3>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster3_l2>; ++ }; ++ ++ cpu@301 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x301>; ++ clocks = <&clockgen 1 3>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster3_l2>; ++ }; ++ ++ cpu@400 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x400>; ++ clocks = <&clockgen 1 4>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster4_l2>; ++ }; ++ ++ cpu@401 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x401>; ++ clocks = <&clockgen 1 4>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster4_l2>; ++ }; ++ ++ cpu@500 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x500>; ++ clocks = <&clockgen 1 5>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster5_l2>; ++ }; ++ ++ cpu@501 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x501>; ++ clocks = <&clockgen 1 5>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster5_l2>; ++ }; ++ ++ cpu@600 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x600>; ++ clocks = <&clockgen 1 6>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster6_l2>; ++ }; ++ ++ cpu@601 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x601>; ++ clocks = <&clockgen 1 6>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster6_l2>; ++ }; ++ ++ cpu@700 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x700>; ++ clocks = <&clockgen 1 7>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster7_l2>; ++ }; ++ ++ cpu@701 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ enable-method = "psci"; ++ reg = <0x701>; ++ clocks = <&clockgen 1 7>; ++ d-cache-size = <0x8000>; ++ d-cache-line-size = <64>; ++ d-cache-sets = <128>; ++ i-cache-size = <0xC000>; ++ i-cache-line-size = <64>; ++ i-cache-sets = <192>; ++ next-level-cache = <&cluster7_l2>; ++ }; ++ ++ cluster0_l2: l2-cache0 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ ++ cluster1_l2: l2-cache1 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ ++ cluster2_l2: l2-cache2 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ ++ cluster3_l2: l2-cache3 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ ++ cluster4_l2: l2-cache4 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ ++ cluster5_l2: l2-cache5 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ ++ cluster6_l2: l2-cache6 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ ++ cluster7_l2: l2-cache7 { ++ compatible = "cache"; ++ cache-size = <0x100000>; ++ cache-line-size = <64>; ++ cache-sets = <1024>; ++ cache-level = <2>; ++ }; ++ }; ++ ++ gic: interrupt-controller@6000000 { ++ compatible = "arm,gic-v3"; ++ reg = <0x0 0x06000000 0 0x10000>, // GIC Dist ++ <0x0 0x06200000 0 0x200000>, // GICR (RD_base + ++ // SGI_base) ++ <0x0 0x0c0c0000 0 0x2000>, // GICC ++ <0x0 0x0c0d0000 0 0x1000>, // GICH ++ <0x0 0x0c0e0000 0 0x20000>; // GICV ++ #interrupt-cells = <3>; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ interrupt-controller; ++ interrupts = ; ++ ++ its: gic-its@6020000 { ++ compatible = "arm,gic-v3-its"; ++ msi-controller; ++ reg = <0x0 0x6020000 0 0x20000>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ pmu { ++ compatible = "arm,cortex-a72-pmu"; ++ interrupts = ; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ memory@80000000 { ++ // DRAM space - 1, size : 2 GB DRAM ++ device_type = "memory"; ++ reg = <0x00000000 0x80000000 0 0x80000000>; ++ }; ++ ++ ddr1: memory-controller@1080000 { ++ compatible = "fsl,qoriq-memory-controller"; ++ reg = <0x0 0x1080000 0x0 0x1000>; ++ interrupts = ; ++ little-endian; ++ }; ++ ++ ddr2: memory-controller@1090000 { ++ compatible = "fsl,qoriq-memory-controller"; ++ reg = <0x0 0x1090000 0x0 0x1000>; ++ interrupts = ; ++ little-endian; ++ }; ++ ++ sysclk: sysclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <100000000>; ++ clock-output-names = "sysclk"; ++ }; ++ ++ soc { ++ compatible = "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; ++ ++ crypto: crypto@8000000 { ++ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; ++ fsl,sec-era = <10>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x00 0x8000000 0x100000>; ++ reg = <0x00 0x8000000 0x0 0x100000>; ++ interrupts = ; ++ dma-coherent; ++ status = "disabled"; ++ ++ sec_jr0: jr@10000 { ++ compatible = "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x10000 0x10000>; ++ interrupts = ; ++ }; ++ ++ sec_jr1: jr@20000 { ++ compatible = "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x20000 0x10000>; ++ interrupts = ; ++ }; ++ ++ sec_jr2: jr@30000 { ++ compatible = "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x30000 0x10000>; ++ interrupts = ; ++ }; ++ ++ sec_jr3: jr@40000 { ++ compatible = "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x40000 0x10000>; ++ interrupts = ; ++ }; ++ }; ++ ++ clockgen: clock-controller@1300000 { ++ compatible = "fsl,lx2160a-clockgen"; ++ reg = <0 0x1300000 0 0xa0000>; ++ #clock-cells = <2>; ++ clocks = <&sysclk>; ++ }; ++ ++ dcfg: syscon@1e00000 { ++ compatible = "fsl,lx2160a-dcfg", "syscon"; ++ reg = <0x0 0x1e00000 0x0 0x10000>; ++ little-endian; ++ }; ++ ++ /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ ++ emdio1: mdio@8b96000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8b96000 0x0 0x1000>; ++ interrupts = ; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ little-endian; /* force the driver in LE mode */ ++ status = "disabled"; ++ }; ++ ++ /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */ ++ emdio2: mdio@8b97000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8b97000 0x0 0x1000>; ++ interrupts = ; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ little-endian; /* force the driver in LE mode */ ++ status = "disabled"; ++ }; ++ ++ pcs_mdio1: mdio@0x8c07000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c07000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pcs_mdio2: mdio@0x8c0b000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c0b000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pcs_mdio3: mdio@0x8c0f000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c0f000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pcs_mdio4: mdio@0x8c13000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c13000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pcs_mdio5: mdio@0x8c17000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c17000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pcs_mdio6: mdio@0x8c1b000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c1b000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pcs_mdio7: mdio@0x8c1f000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c1f000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ pcs_mdio8: mdio@0x8c23000 { ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8c23000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ serdes1: serdes@1ea0000 { ++ compatible = "fsl,serdes-28g"; ++ reg = <0x0 0x1ea0000 0 0x00002000>; ++ little-endian; ++ }; ++ ++ i2c0: i2c@2000000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2000000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++ }; ++ ++ i2c1: i2c@2010000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2010000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ status = "disabled"; ++ }; ++ ++ i2c2: i2c@2020000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2020000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ status = "disabled"; ++ }; ++ ++ i2c3: i2c@2030000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2030000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ status = "disabled"; ++ }; ++ ++ i2c4: i2c@2040000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2040000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++ }; ++ ++ i2c5: i2c@2050000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2050000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ status = "disabled"; ++ }; ++ ++ i2c6: i2c@2060000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2060000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ status = "disabled"; ++ }; ++ ++ i2c7: i2c@2070000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2070000 0x0 0x10000>; ++ interrupts = ; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 7>; ++ status = "disabled"; ++ }; ++ ++ dspi0: spi@2100000 { ++ compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2100000 0x0 0x10000>; ++ interrupts = ; ++ clocks = <&clockgen 4 7>; ++ clock-names = "dspi"; ++ spi-num-chipselects = <5>; ++ bus-num = <0>; ++ status = "disabled"; ++ }; ++ ++ dspi1: spi@2110000 { ++ compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2110000 0x0 0x10000>; ++ interrupts = ; ++ clocks = <&clockgen 4 7>; ++ clock-names = "dspi"; ++ spi-num-chipselects = <5>; ++ bus-num = <1>; ++ status = "disabled"; ++ }; ++ ++ dspi2: spi@2120000 { ++ compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2120000 0x0 0x10000>; ++ interrupts = ; ++ clocks = <&clockgen 4 7>; ++ clock-names = "dspi"; ++ spi-num-chipselects = <5>; ++ bus-num = <2>; ++ status = "disabled"; ++ }; ++ ++ esdhc0: esdhc@2140000 { ++ compatible = "fsl,esdhc"; ++ reg = <0x0 0x2140000 0x0 0x10000>; ++ interrupts = <0 28 0x4>; /* Level high type */ ++ clocks = <&clockgen 4 1>; ++ voltage-ranges = <1800 1800 3300 3300>; ++ sdhci,auto-cmd12; ++ little-endian; ++ bus-width = <4>; ++ status = "disabled"; ++ }; ++ ++ esdhc1: esdhc@2150000 { ++ compatible = "fsl,esdhc"; ++ reg = <0x0 0x2150000 0x0 0x10000>; ++ interrupts = <0 63 0x4>; /* Level high type */ ++ clocks = <&clockgen 4 1>; ++ voltage-ranges = <1800 1800 3300 3300>; ++ sdhci,auto-cmd12; ++ broken-cd; ++ little-endian; ++ bus-width = <4>; ++ status = "disabled"; ++ }; ++ ++ uart0: serial@21c0000 { ++ compatible = "arm,sbsa-uart","arm,pl011"; ++ reg = <0x0 0x21c0000 0x0 0x1000>; ++ interrupts = ; ++ current-speed = <115200>; ++ status = "disabled"; ++ }; ++ ++ uart1: serial@21d0000 { ++ compatible = "arm,sbsa-uart","arm,pl011"; ++ reg = <0x0 0x21d0000 0x0 0x1000>; ++ interrupts = ; ++ current-speed = <115200>; ++ status = "disabled"; ++ }; ++ ++ uart2: serial@21e0000 { ++ compatible = "arm,sbsa-uart","arm,pl011"; ++ reg = <0x0 0x21e0000 0x0 0x1000>; ++ interrupts = ; ++ current-speed = <115200>; ++ status = "disabled"; ++ }; ++ ++ uart3: serial@21f0000 { ++ compatible = "arm,sbsa-uart","arm,pl011"; ++ reg = <0x0 0x21f0000 0x0 0x1000>; ++ interrupts = ; ++ current-speed = <115200>; ++ status = "disabled"; ++ }; ++ ++ gpio0: gpio@2300000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2300000 0x0 0x10000>; ++ interrupts = ; ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio1: gpio@2310000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2310000 0x0 0x10000>; ++ interrupts = ; ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio2: gpio@2320000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2320000 0x0 0x10000>; ++ interrupts = ; ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio3: gpio@2330000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2330000 0x0 0x10000>; ++ interrupts = ; ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ watchdog@23a0000 { ++ compatible = "arm,sbsa-gwdt"; ++ reg = <0x0 0x23a0000 0 0x1000>, ++ <0x0 0x2390000 0 0x1000>; ++ interrupts = ; ++ timeout-sec = <30>; ++ }; ++ ++ ftm0: ftm0@2800000 { ++ compatible = "fsl,ftm-alarm", "fsl,lx2160a-ftm-alarm"; ++ reg = <0x0 0x2800000 0x0 0x10000>, ++ <0x0 0x1e34050 0x0 0x4>; ++ reg-names = "ftm", "FlexTimer1"; ++ interrupts = <0 44 0x4>; ++ status = "okay"; ++ }; ++ ++ usb0: usb@3100000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3100000 0x0 0x10000>; ++ interrupts = ; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ status = "disabled"; ++ }; ++ ++ usb1: usb@3110000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3110000 0x0 0x10000>; ++ interrupts = ; ++ dr_mode = "host"; ++ snps,quirk-frame-length-adjustment = <0x20>; ++ snps,dis_rxdet_inp3_quirk; ++ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; ++ snps,host-vbus-glitches; ++ status = "disabled"; ++ }; ++ ++ smmu: iommu@5000000 { ++ compatible = "arm,mmu-500"; ++ reg = <0 0x5000000 0 0x800000>; ++ #iommu-cells = <1>; ++ #global-interrupts = <14>; ++ // global secure fault ++ interrupts = , ++ // combined secure ++ , ++ // global non-secure fault ++ , ++ // combined non-secure ++ , ++ // performance counter interrupts 0-9 ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ // per context interrupt, 64 interrupts ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ dma-coherent; ++ }; ++ ++ fsl_mc: fsl-mc@80c000000 { ++ compatible = "fsl,qoriq-mc"; ++ reg = <0x00000008 0x0c000000 0 0x40>, ++ <0x00000000 0x08340000 0 0x40000>; ++ msi-parent = <&its>; ++ /* iommu-map property is fixed up by u-boot */ ++ iommu-map = <0 &smmu 0 0>; ++ dma-coherent; ++ #address-cells = <3>; ++ #size-cells = <1>; ++ ++ /* ++ * Region type 0x0 - MC portals ++ * Region type 0x1 - QBMAN portals ++ */ ++ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 ++ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; ++ ++ /* ++ * Define the maximum number of MACs present on the SoC. ++ */ ++ dpmacs { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ dpmac1: dpmac@1 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x1>; ++ }; ++ ++ dpmac2: dpmac@2 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x2>; ++ }; ++ ++ dpmac3: dpmac@3 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x3>; ++ }; ++ ++ dpmac4: dpmac@4 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x4>; ++ }; ++ ++ dpmac5: dpmac@5 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x5>; ++ }; ++ ++ dpmac6: dpmac@6 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x6>; ++ }; ++ ++ dpmac7: dpmac@7 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x7>; ++ }; ++ ++ dpmac8: dpmac@8 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x8>; ++ }; ++ ++ dpmac9: dpmac@9 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x9>; ++ }; ++ ++ dpmac10: dpmac@a { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0xa>; ++ }; ++ ++ dpmac11: dpmac@b { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0xb>; ++ }; ++ ++ dpmac12: dpmac@c { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0xc>; ++ }; ++ ++ dpmac13: dpmac@d { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0xd>; ++ }; ++ ++ dpmac14: dpmac@e { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0xe>; ++ }; ++ ++ dpmac15: dpmac@f { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0xf>; ++ }; ++ ++ dpmac16: dpmac@10 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x10>; ++ }; ++ ++ dpmac17: dpmac@11 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x11>; ++ }; ++ ++ dpmac18: dpmac@12 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0x12>; ++ }; ++ }; ++ }; ++ ++ fspi: flexspi@20c0000 { ++ status = "disabled"; ++ compatible = "nxp,lx2160a-fspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x20c0000 0x0 0x10000>, ++ <0x0 0x20000000 0x0 0x10000000>; ++ reg-names = "FSPI", "FSPI-memory"; ++ interrupts = <0 25 0x4>; /* Level high type */ ++ clocks = <&clockgen 4 3>, <&clockgen 4 3>; ++ clock-names = "fspi_en", "fspi"; ++ }; ++ ++ sata0: sata@3200000 { ++ status = "disabled"; ++ compatible = "fsl,lx2160a-ahci"; ++ reg = <0x0 0x3200000 0x0 0x10000>; ++ interrupts = ; ++ clocks = <&clockgen 4 3>; ++ dma-coherent; ++ }; ++ ++ sata1: sata@3210000 { ++ status = "disabled"; ++ compatible = "fsl,lx2160a-ahci"; ++ reg = <0x0 0x3210000 0x0 0x10000>; ++ interrupts = ; ++ clocks = <&clockgen 4 3>; ++ dma-coherent; ++ }; ++ ++ sata2: sata@3220000 { ++ status = "disabled"; ++ compatible = "fsl,lx2160a-ahci"; ++ reg = <0x0 0x3220000 0x0 0x10000>; ++ interrupts = ; ++ clocks = <&clockgen 4 3>; ++ dma-coherent; ++ }; ++ ++ sata3: sata@3230000 { ++ status = "disabled"; ++ compatible = "fsl,lx2160a-ahci"; ++ reg = <0x0 0x3230000 0x0 0x10000>; ++ interrupts = ; ++ clocks = <&clockgen 4 3>; ++ dma-coherent; ++ }; ++ ++ pcie@3400000 { ++ compatible = "fsl,lx2160a-pcie"; ++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ ++ 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ ++ reg-names = "csr_axi_slave", "config_axi_slave"; ++ interrupts = , /* AER interrupt */ ++ , /* PME interrupt */ ++ ; /* controller interrupt */ ++ interrupt-names = "aer", "pme", "intr"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ apio-wins = <8>; ++ ppio-wins = <8>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3400000 { ++ compatible = "fsl,lx2160a-pcie-ep"; ++ reg = <0x00 0x03400000 0x0 0x00100000 ++ 0x80 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ob-windows = <256>; ++ status = "disabled"; ++ }; ++ ++ pcie@3500000 { ++ compatible = "fsl,lx2160a-pcie"; ++ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ ++ 0x88 0x00000000 0x0 0x00001000>; /* configuration space */ ++ reg-names = "csr_axi_slave", "config_axi_slave"; ++ interrupts = , /* AER interrupt */ ++ , /* PME interrupt */ ++ ; /* controller interrupt */ ++ interrupt-names = "aer", "pme", "intr"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ apio-wins = <8>; ++ ppio-wins = <8>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3500000 { ++ compatible = "fsl,lx2160a-pcie-ep"; ++ reg = <0x00 0x03500000 0x0 0x00100000 ++ 0x88 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ob-windows = <256>; ++ status = "disabled"; ++ }; ++ ++ pcie@3600000 { ++ compatible = "fsl,lx2160a-pcie"; ++ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ ++ 0x90 0x00000000 0x0 0x00001000>; /* configuration space */ ++ reg-names = "csr_axi_slave", "config_axi_slave"; ++ interrupts = , /* AER interrupt */ ++ , /* PME interrupt */ ++ ; /* controller interrupt */ ++ interrupt-names = "aer", "pme", "intr"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ apio-wins = <8>; ++ ppio-wins = <8>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3600000 { ++ compatible = "fsl,lx2160a-pcie-ep"; ++ reg = <0x00 0x03600000 0x0 0x00100000 ++ 0x90 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ob-windows = <256>; ++ max-functions = <2>; ++ status = "disabled"; ++ }; ++ ++ pcie@3700000 { ++ compatible = "fsl,lx2160a-pcie"; ++ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ ++ 0x98 0x00000000 0x0 0x00001000>; /* configuration space */ ++ reg-names = "csr_axi_slave", "config_axi_slave"; ++ interrupts = , /* AER interrupt */ ++ , /* PME interrupt */ ++ ; /* controller interrupt */ ++ interrupt-names = "aer", "pme", "intr"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ apio-wins = <8>; ++ ppio-wins = <8>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3700000 { ++ compatible = "fsl,lx2160a-pcie-ep"; ++ reg = <0x00 0x03700000 0x0 0x00100000 ++ 0x98 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ob-windows = <256>; ++ status = "disabled"; ++ }; ++ ++ pcie@3800000 { ++ compatible = "fsl,lx2160a-pcie"; ++ reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ ++ 0xa0 0x00000000 0x0 0x00001000>; /* configuration space */ ++ reg-names = "csr_axi_slave", "config_axi_slave"; ++ interrupts = , /* AER interrupt */ ++ , /* PME interrupt */ ++ ; /* controller interrupt */ ++ interrupt-names = "aer", "pme", "intr"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ apio-wins = <8>; ++ ppio-wins = <8>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3800000 { ++ compatible = "fsl,lx2160a-pcie-ep"; ++ reg = <0x00 0x03800000 0x0 0x00100000 ++ 0xa0 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ob-windows = <256>; ++ max-functions = <2>; ++ status = "disabled"; ++ }; ++ ++ pcie@3900000 { ++ compatible = "fsl,lx2160a-pcie"; ++ reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ ++ 0xa8 0x00000000 0x0 0x00001000>; /* configuration space */ ++ reg-names = "csr_axi_slave", "config_axi_slave"; ++ interrupts = , /* AER interrupt */ ++ , /* PME interrupt */ ++ ; /* controller interrupt */ ++ interrupt-names = "aer", "pme", "intr"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ apio-wins = <8>; ++ ppio-wins = <8>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, ++ <0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; ++ status = "disabled"; ++ }; ++ ++ pcie_ep@3900000 { ++ compatible = "fsl,lx2160a-pcie-ep"; ++ reg = <0x00 0x03900000 0x0 0x00100000 ++ 0xa8 0x00000000 0x8 0x00000000>; ++ reg-names = "regs", "addr_space"; ++ num-ob-windows = <256>; ++ status = "disabled"; ++ }; ++ ++ }; ++ ++ firmware { ++ optee { ++ compatible = "linaro,optee-tz"; ++ method = "smc"; ++ }; ++ }; ++}; --- /dev/null -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi -@@ -0,0 +1,47 @@ ++++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi +@@ -0,0 +1,99 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Device Tree Include file for Thermal Monitor Unit. ++ * ++ * Copyright 2018 NXP ++ * ++ * Tang Yuantian ++ * ++ */ ++ ++&thermal_zones { ++ thermal-zone0 { ++ cooling-maps { ++ map1 { ++ trip = <&alert0>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone1 { ++ cooling-maps { ++ map1 { ++ trip = <&alert1>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone2 { ++ cooling-maps { ++ map1 { ++ trip = <&alert2>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone3 { ++ cooling-maps { ++ map1 { ++ trip = <&alert3>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone4 { ++ cooling-maps { ++ map1 { ++ trip = <&alert4>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone5 { ++ cooling-maps { ++ map1 { ++ trip = <&alert5>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone6 { ++ cooling-maps { ++ map1 { ++ trip = <&alert6>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone7 { ++ cooling-maps { ++ map1 { ++ trip = <&alert7>; ++ cooling-device = ++ <&cooling_map1 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi +@@ -0,0 +1,99 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Device Tree Include file for Thermal Monitor Unit. ++ * ++ * Copyright 2018 NXP ++ * ++ * Tang Yuantian ++ * ++ */ ++ ++&thermal_zones { ++ thermal-zone0 { ++ cooling-maps { ++ map2 { ++ trip = <&alert0>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone1 { ++ cooling-maps { ++ map2 { ++ trip = <&alert1>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone2 { ++ cooling-maps { ++ map2 { ++ trip = <&alert2>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone3 { ++ cooling-maps { ++ map2 { ++ trip = <&alert3>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone4 { ++ cooling-maps { ++ map2 { ++ trip = <&alert4>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone5 { ++ cooling-maps { ++ map2 { ++ trip = <&alert5>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone6 { ++ cooling-maps { ++ map2 { ++ trip = <&alert6>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ ++ thermal-zone7 { ++ cooling-maps { ++ map2 { ++ trip = <&alert7>; ++ cooling-device = ++ <&cooling_map2 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi +@@ -0,0 +1,99 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* -+ * QorIQ FMan v3 OH ports device tree ++ * Device Tree Include file for Thermal Monitor Unit. + * -+ * Copyright 2012-2015 Freescale Semiconductor Inc. ++ * Copyright 2018 NXP ++ * ++ * Tang Yuantian + * -+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + -+fman@1a00000 { -+ -+ fman0_oh1: port@82000 { -+ cell-index = <0>; -+ compatible = "fsl,fman-port-oh"; -+ reg = <0x82000 0x1000>; ++&thermal_zones { ++ thermal-zone0 { ++ cooling-maps { ++ map3 { ++ trip = <&alert0>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ fman0_oh2: port@83000 { -+ cell-index = <1>; -+ compatible = "fsl,fman-port-oh"; -+ reg = <0x83000 0x1000>; ++ thermal-zone1 { ++ cooling-maps { ++ map3 { ++ trip = <&alert1>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ fman0_oh3: port@84000 { -+ cell-index = <2>; -+ compatible = "fsl,fman-port-oh"; -+ reg = <0x84000 0x1000>; ++ thermal-zone2 { ++ cooling-maps { ++ map3 { ++ trip = <&alert2>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ fman0_oh4: port@85000 { -+ cell-index = <3>; -+ compatible = "fsl,fman-port-oh"; -+ reg = <0x85000 0x1000>; ++ thermal-zone3 { ++ cooling-maps { ++ map3 { ++ trip = <&alert3>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ fman0_oh5: port@86000 { -+ cell-index = <4>; -+ compatible = "fsl,fman-port-oh"; -+ reg = <0x86000 0x1000>; ++ thermal-zone4 { ++ cooling-maps { ++ map3 { ++ trip = <&alert4>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ fman0_oh6: port@87000 { -+ cell-index = <5>; -+ compatible = "fsl,fman-port-oh"; -+ reg = <0x87000 0x1000>; ++ thermal-zone5 { ++ cooling-maps { ++ map3 { ++ trip = <&alert5>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+}; ---- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi -@@ -1,9 +1,9 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - /* - * QorIQ FMan v3 device tree - * - * Copyright 2012-2015 Freescale Semiconductor Inc. - * -- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) - */ - - fman0: fman@1a00000 { -@@ -19,45 +19,95 @@ fman0: fman@1a00000 { - clock-names = "fmanclk"; - fsl,qman-channel-range = <0x800 0x10>; - -+ cc { -+ compatible = "fsl,fman-cc"; ++ thermal-zone6 { ++ cooling-maps { ++ map3 { ++ trip = <&alert6>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + - muram@0 { - compatible = "fsl,fman-muram"; - reg = <0x0 0x60000>; - }; - -+ bmi@80000 { -+ compatible = "fsl,fman-bmi"; -+ reg = <0x80000 0x400>; ++ thermal-zone7 { ++ cooling-maps { ++ map3 { ++ trip = <&alert7>; ++ cooling-device = ++ <&cooling_map3 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi +@@ -0,0 +1,251 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Device Tree Include file for Thermal Monitor Unit. ++ * ++ * Copyright 2018 NXP ++ * ++ * Tang Yuantian ++ * ++ */ + -+ qmi@80400 { -+ compatible = "fsl,fman-qmi"; -+ reg = <0x80400 0x400>; ++thermal_zones: thermal-zones { ++ thermal_zone0: thermal-zone0 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 0>; ++ status = "disabled"; ++ ++ trips { ++ alert0: alert0 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit0: crit0 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert0>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + - fman0_oh_0x2: port@82000 { - cell-index = <0x2>; - compatible = "fsl,fman-v3-port-oh"; - reg = <0x82000 0x1000>; -+ fsl,qman-channel-id = <0x809>; - }; - - fman0_oh_0x3: port@83000 { - cell-index = <0x3>; - compatible = "fsl,fman-v3-port-oh"; - reg = <0x83000 0x1000>; -+ fsl,qman-channel-id = <0x80a>; - }; - - fman0_oh_0x4: port@84000 { - cell-index = <0x4>; - compatible = "fsl,fman-v3-port-oh"; - reg = <0x84000 0x1000>; -+ fsl,qman-channel-id = <0x80b>; - }; - - fman0_oh_0x5: port@85000 { - cell-index = <0x5>; - compatible = "fsl,fman-v3-port-oh"; - reg = <0x85000 0x1000>; -+ fsl,qman-channel-id = <0x80c>; - }; - - fman0_oh_0x6: port@86000 { - cell-index = <0x6>; - compatible = "fsl,fman-v3-port-oh"; - reg = <0x86000 0x1000>; -+ fsl,qman-channel-id = <0x80d>; - }; - - fman0_oh_0x7: port@87000 { - cell-index = <0x7>; - compatible = "fsl,fman-v3-port-oh"; - reg = <0x87000 0x1000>; -+ fsl,qman-channel-id = <0x80e>; ++ thermal-zone1 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 1>; ++ status = "disabled"; ++ ++ trips { ++ alert1: alert1 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit1: crit1 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert1>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ policer@c0000 { -+ compatible = "fsl,fman-policer"; -+ reg = <0xc0000 0x1000>; ++ thermal-zone2 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 2>; ++ status = "disabled"; ++ ++ trips { ++ alert2: alert2 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit2: crit2 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert2>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ keygen@c1000 { -+ compatible = "fsl,fman-keygen"; -+ reg = <0xc1000 0x1000>; ++ thermal-zone3 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 3>; ++ status = "disabled"; ++ ++ trips { ++ alert3: alert3 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit3: crit3 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert3>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ dma@c2000 { -+ compatible = "fsl,fman-dma"; -+ reg = <0xc2000 0x1000>; ++ thermal-zone4 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 4>; ++ status = "disabled"; ++ ++ trips { ++ alert4: alert4 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit4: crit4 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert4>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ fpm@c3000 { -+ compatible = "fsl,fman-fpm"; -+ reg = <0xc3000 0x1000>; ++ thermal-zone5 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 5>; ++ status = "disabled"; ++ ++ trips { ++ alert5: alert5 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit5: crit5 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert5>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ parser@c7000 { -+ compatible = "fsl,fman-parser"; -+ reg = <0xc7000 0x1000>; ++ thermal-zone6 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 6>; ++ status = "disabled"; ++ ++ trips { ++ alert6: alert6 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit6: crit6 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert6>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; + }; + -+ vsps@dc000 { -+ compatible = "fsl,fman-vsps"; -+ reg = <0xdc000 0x1000>; - }; - - mdio0: mdio@fc000 { -@@ -75,7 +125,7 @@ fman0: fman@1a00000 { - }; - - ptp_timer0: ptp-timer@fe000 { -- compatible = "fsl,fman-ptp-timer"; -+ compatible = "fsl,fman-ptp-timer", "fsl,fman-rtc"; - reg = <0xfe000 0x1000>; - }; - }; ++ thermal-zone7 { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ thermal-sensors = <&tmu 7>; ++ status = "disabled"; ++ ++ trips { ++ alert7: alert7 { ++ temperature = <75000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ ++ crit7: crit7 { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&alert7>; ++ cooling-device = ++ <&cooling_map0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++}; --- /dev/null -+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi -@@ -0,0 +1,38 @@ ++++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi +@@ -0,0 +1,55 @@ +/* -+ * QorIQ QMan SDK Portals device tree nodes ++ * QorIQ BMan SDK Portals device tree nodes + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * Copyright 2017 NXP @@ -6244,300 +10153,189 @@ Signed-off-by: Biwen Li + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + -+&qportals { -+ qman-fqids@0 { -+ compatible = "fsl,fqid-range"; -+ fsl,fqid-range = <256 256>; ++&bportals { ++ bman-portal@0 { ++ cell-index = <0>; ++ }; ++ ++ bman-portal@10000 { ++ cell-index = <1>; ++ }; ++ ++ bman-portal@20000 { ++ cell-index = <2>; ++ }; ++ ++ bman-portal@30000 { ++ cell-index = <3>; ++ }; ++ ++ bman-portal@40000 { ++ cell-index = <4>; ++ }; ++ ++ bman-portal@50000 { ++ cell-index = <5>; ++ }; ++ ++ bman-portal@60000 { ++ cell-index = <6>; + }; + -+ qman-fqids@1 { -+ compatible = "fsl,fqid-range"; -+ fsl,fqid-range = <32768 32768>; ++ bman-portal@70000 { ++ cell-index = <7>; + }; + -+ qman-pools@0 { -+ compatible = "fsl,pool-channel-range"; -+ fsl,pool-channel-range = <0x401 0xf>; ++ bman-portal@80000 { ++ cell-index = <8>; + }; + -+ qman-cgrids@0 { -+ compatible = "fsl,cgrid-range"; -+ fsl,cgrid-range = <0 256>; ++ bman-portal@90000 { ++ cell-index = <9>; + }; + -+ qman-ceetm@0 { -+ compatible = "fsl,qman-ceetm"; -+ fsl,ceetm-lfqid-range = <0xf00000 0x1000>; -+ fsl,ceetm-sp-range = <0 16>; -+ fsl,ceetm-lni-range = <0 8>; -+ fsl,ceetm-channel-range = <0 32>; ++ bman-bpids@0 { ++ compatible = "fsl,bpid-range"; ++ fsl,bpid-range = <32 32>; + }; +}; ---- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi -+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +--- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * QorIQ QMan Portals device tree + * QorIQ BMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ - &qportals { -@@ -77,4 +77,11 @@ - interrupts = ; - cell-index = <8>; + &bportals { +@@ -68,4 +68,10 @@ + reg = <0x80000 0x4000>, <0x4080000 0x4000>; + interrupts = ; }; + -+ qportal9: qman-portal@90000 { -+ compatible = "fsl,qman-portal"; ++ bman-portal@90000 { ++ compatible = "fsl,bman-portal"; + reg = <0x90000 0x4000>, <0x4090000 0x4000>; -+ interrupts = ; -+ cell-index = <9>; ++ interrupts = ; + }; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { - fman0_rx_0x10: port@90000 { - cell-index = <0x10>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-10g-rx"; - reg = <0x90000 0x1000>; - }; - - fman0_tx_0x30: port@b0000 { - cell-index = <0x30>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-10g-tx"; - reg = <0xb0000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { - fman0_rx_0x08: port@88000 { - cell-index = <0x8>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x88000 0x1000>; - }; - - fman0_tx_0x28: port@a8000 { - cell-index = <0x28>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xa8000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { - fman0_rx_0x09: port@89000 { - cell-index = <0x9>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x89000 0x1000>; - }; - - fman0_tx_0x29: port@a9000 { - cell-index = <0x29>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xa9000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { - fman0_rx_0x0a: port@8a000 { - cell-index = <0xa>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8a000 0x1000>; - }; - - fman0_tx_0x2a: port@aa000 { - cell-index = <0x2a>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xaa000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { - fman0_rx_0x0b: port@8b000 { - cell-index = <0xb>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8b000 0x1000>; - }; - - fman0_tx_0x2b: port@ab000 { - cell-index = <0x2b>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xab000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { - fman0_rx_0x0c: port@8c000 { - cell-index = <0xc>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8c000 0x1000>; - }; - - fman0_tx_0x2c: port@ac000 { - cell-index = <0x2c>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xac000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x10: port@90000 { - cell-index = <0x10>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-10g-rx"; - reg = <0x90000 0x1000>; - }; - - fman1_tx_0x30: port@b0000 { - cell-index = <0x30>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-10g-tx"; - reg = <0xb0000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x08: port@88000 { - cell-index = <0x8>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x88000 0x1000>; - }; - - fman1_tx_0x28: port@a8000 { - cell-index = <0x28>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xa8000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x09: port@89000 { - cell-index = <0x9>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x89000 0x1000>; - }; - - fman1_tx_0x29: port@a9000 { - cell-index = <0x29>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xa9000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x0a: port@8a000 { - cell-index = <0xa>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8a000 0x1000>; - }; - - fman1_tx_0x2a: port@aa000 { - cell-index = <0x2a>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xaa000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x0b: port@8b000 { - cell-index = <0xb>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8b000 0x1000>; - }; - - fman1_tx_0x2b: port@ab000 { - cell-index = <0x2b>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xab000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x0c: port@8c000 { - cell-index = <0xc>; -- compatible = "fsl,fman-v2-port-rx"; -+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8c000 0x1000>; - }; - - fman1_tx_0x2c: port@ac000 { - cell-index = <0x2c>; -- compatible = "fsl,fman-v2-port-tx"; -+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx"; - reg = <0xac000 0x1000>; - }; - ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi -@@ -35,7 +35,7 @@ - fman@400000 { - fman0_rx_0x08: port@88000 { - cell-index = <0x8>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx"; - reg = <0x88000 0x1000>; - fsl,fman-10g-port; - fsl,fman-best-effort-port; -@@ -43,7 +43,7 @@ fman@400000 { +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi +@@ -0,0 +1,97 @@ ++/* ++ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ] ++ * ++ * Copyright 2012 - 2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++fsldpaa: fsl,dpaa { ++ compatible = "fsl,ls1043a-dpaa", "simple-bus", "fsl,dpaa"; ++ ethernet@0 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&enet0>; ++ dma-coherent; ++ }; ++ ethernet@1 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&enet1>; ++ dma-coherent; ++ }; ++ ethernet@2 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&enet2>; ++ dma-coherent; ++ }; ++ ethernet@3 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&enet3>; ++ dma-coherent; ++ }; ++ ethernet@4 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&enet4>; ++ dma-coherent; ++ }; ++ ethernet@5 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&enet5>; ++ dma-coherent; ++ }; ++ ethernet@8 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&enet6>; ++ dma-coherent; ++ }; ++ ethernet@6 { ++ compatible = "fsl,im-ethernet"; ++ fsl,fman-mac = <&enet2>; ++ dma-coherent; ++ fpmevt-sel = <0>; ++ }; ++ ethernet@7 { ++ compatible = "fsl,im-ethernet"; ++ fsl,fman-mac = <&enet3>; ++ dma-coherent; ++ fpmevt-sel = <1>; ++ }; ++ ethernet@10 { ++ compatible = "fsl,im-ethernet"; ++ fsl,fman-mac = <&enet4>; ++ dma-coherent; ++ fpmevt-sel = <2>; ++ }; ++ ethernet@11 { ++ compatible = "fsl,im-ethernet"; ++ fsl,fman-mac = <&enet5>; ++ dma-coherent; ++ fpmevt-sel = <3>; ++ }; ++}; ++ +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi +@@ -1,27 +1,28 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 10g port #0 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ - fman0_tx_0x28: port@a8000 { - cell-index = <0x28>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx"; - reg = <0xa8000 0x1000>; - fsl,fman-10g-port; - fsl,fman-best-effort-port; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi -@@ -35,14 +35,14 @@ - fman@400000 { + fman@1a00000 { fman0_rx_0x10: port@90000 { cell-index = <0x10>; - compatible = "fsl,fman-v3-port-rx"; @@ -6552,31 +10350,36 @@ Signed-off-by: Biwen Li + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx"; reg = <0xb0000 0x1000>; fsl,fman-10g-port; ++ fsl,qman-channel-id = <0x800>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi -@@ -35,7 +35,7 @@ - fman@400000 { - fman0_rx_0x09: port@89000 { - cell-index = <0x9>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx"; - reg = <0x89000 0x1000>; - fsl,fman-10g-port; - fsl,fman-best-effort-port; -@@ -43,7 +43,7 @@ fman@400000 { - fman0_tx_0x29: port@a9000 { - cell-index = <0x29>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx"; - reg = <0xa9000 0x1000>; - fsl,fman-10g-port; - fsl,fman-best-effort-port; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi -@@ -35,14 +35,14 @@ - fman@400000 { +- ethernet@f0000 { ++ mac9: ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; +@@ -29,7 +30,7 @@ fman@1a00000 { + pcsphy-handle = <&pcsphy6>; + }; + +- mdio@f1000 { ++ mdio9: mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi +@@ -1,27 +1,28 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 10g port #1 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + + fman@1a00000 { fman0_rx_0x11: port@91000 { cell-index = <0x11>; - compatible = "fsl,fman-v3-port-rx"; @@ -6591,258 +10394,516 @@ Signed-off-by: Biwen Li + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx"; reg = <0xb1000 0x1000>; fsl,fman-10g-port; ++ fsl,qman-channel-id = <0x801>; + }; + +- ethernet@f2000 { ++ mac10: ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; +@@ -29,7 +30,7 @@ fman@1a00000 { + pcsphy-handle = <&pcsphy7>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { + +- mdio@f3000 { ++ mdio10: mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi +@@ -1,22 +1,23 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 1g port #0 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + + fman@1a00000 { fman0_rx_0x08: port@88000 { cell-index = <0x8>; - compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; ++ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x88000 0x1000>; }; fman0_tx_0x28: port@a8000 { cell-index = <0x28>; - compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; ++ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xa8000 0x1000>; ++ fsl,qman-channel-id = <0x802>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { + ethernet@e0000 { +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi +@@ -1,22 +1,23 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 1g port #1 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + + fman@1a00000 { fman0_rx_0x09: port@89000 { cell-index = <0x9>; - compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; ++ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x89000 0x1000>; }; fman0_tx_0x29: port@a9000 { cell-index = <0x29>; - compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; ++ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xa9000 0x1000>; ++ fsl,qman-channel-id = <0x803>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { + ethernet@e2000 { +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi +@@ -1,22 +1,23 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 1g port #2 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + + fman@1a00000 { fman0_rx_0x0a: port@8a000 { cell-index = <0xa>; - compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; ++ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8a000 0x1000>; }; fman0_tx_0x2a: port@aa000 { cell-index = <0x2a>; - compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; ++ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xaa000 0x1000>; ++ fsl,qman-channel-id = <0x804>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { + ethernet@e4000 { +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi +@@ -1,22 +1,23 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 1g port #3 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + + fman@1a00000 { fman0_rx_0x0b: port@8b000 { cell-index = <0xb>; - compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; ++ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8b000 0x1000>; }; fman0_tx_0x2b: port@ab000 { cell-index = <0x2b>; - compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; ++ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xab000 0x1000>; ++ fsl,qman-channel-id = <0x805>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { + ethernet@e6000 { +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi +@@ -1,22 +1,23 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 1g port #4 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + + fman@1a00000 { fman0_rx_0x0c: port@8c000 { cell-index = <0xc>; - compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; ++ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8c000 0x1000>; }; fman0_tx_0x2c: port@ac000 { cell-index = <0x2c>; - compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; ++ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xac000 0x1000>; ++ fsl,qman-channel-id = <0x806>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi -@@ -35,13 +35,13 @@ - fman@400000 { + ethernet@e8000 { +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi +@@ -1,22 +1,23 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 1g port #5 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + + fman@1a00000 { fman0_rx_0x0d: port@8d000 { cell-index = <0xd>; - compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; ++ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8d000 0x1000>; }; fman0_tx_0x2d: port@ad000 { cell-index = <0x2d>; - compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; ++ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xad000 0x1000>; ++ fsl,qman-channel-id = <0x807>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi -@@ -35,14 +35,14 @@ - fman@500000 { - fman1_rx_0x10: port@90000 { - cell-index = <0x10>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx"; - reg = <0x90000 0x1000>; - fsl,fman-10g-port; - }; - - fman1_tx_0x30: port@b0000 { - cell-index = <0x30>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx"; - reg = <0xb0000 0x1000>; - fsl,fman-10g-port; - }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi -@@ -35,14 +35,14 @@ - fman@500000 { - fman1_rx_0x11: port@91000 { - cell-index = <0x11>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx"; - reg = <0x91000 0x1000>; - fsl,fman-10g-port; - }; - - fman1_tx_0x31: port@b1000 { - cell-index = <0x31>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx"; - reg = <0xb1000 0x1000>; - fsl,fman-10g-port; - }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x08: port@88000 { - cell-index = <0x8>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; - reg = <0x88000 0x1000>; - }; + ethernet@ea000 { +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi +@@ -0,0 +1,47 @@ ++/* ++ * QorIQ FMan v3 OH ports device tree ++ * ++ * Copyright 2012-2015 Freescale Semiconductor Inc. ++ * ++ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) ++ */ ++ ++fman@1a00000 { ++ ++ fman0_oh1: port@82000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x82000 0x1000>; ++ }; ++ ++ fman0_oh2: port@83000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x83000 0x1000>; ++ }; ++ ++ fman0_oh3: port@84000 { ++ cell-index = <2>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x84000 0x1000>; ++ }; ++ ++ fman0_oh4: port@85000 { ++ cell-index = <3>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x85000 0x1000>; ++ }; ++ ++ fman0_oh5: port@86000 { ++ cell-index = <4>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x86000 0x1000>; ++ }; ++ ++ fman0_oh6: port@87000 { ++ cell-index = <5>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x87000 0x1000>; ++ }; ++ ++}; +--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +@@ -1,9 +1,9 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ FMan v3 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ - fman1_tx_0x28: port@a8000 { - cell-index = <0x28>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; - reg = <0xa8000 0x1000>; - }; + fman0: fman@1a00000 { +@@ -11,53 +11,104 @@ fman0: fman@1a00000 { + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; +- ranges = <0x0 0x0 0x1a00000 0x100000>; +- reg = <0x0 0x1a00000 0x0 0x100000>; ++ ranges = <0x0 0x0 0x1a00000 0xfe000>; ++ reg = <0x0 0x1a00000 0x0 0xfe000>; + interrupts = , + ; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; ++ ptimer-handle = <&ptp_timer0>; ++ ++ cc { ++ compatible = "fsl,fman-cc"; ++ }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x09: port@89000 { - cell-index = <0x9>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; - reg = <0x89000 0x1000>; + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; }; - fman1_tx_0x29: port@a9000 { - cell-index = <0x29>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; - reg = <0xa9000 0x1000>; ++ bmi@80000 { ++ compatible = "fsl,fman-bmi"; ++ reg = <0x80000 0x400>; ++ }; ++ ++ qmi@80400 { ++ compatible = "fsl,fman-qmi"; ++ reg = <0x80400 0x400>; ++ }; ++ + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; ++ fsl,qman-channel-id = <0x809>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x0a: port@8a000 { - cell-index = <0xa>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8a000 0x1000>; + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; ++ fsl,qman-channel-id = <0x80a>; }; - fman1_tx_0x2a: port@aa000 { - cell-index = <0x2a>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; - reg = <0xaa000 0x1000>; + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; ++ fsl,qman-channel-id = <0x80b>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x0b: port@8b000 { - cell-index = <0xb>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8b000 0x1000>; + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; ++ fsl,qman-channel-id = <0x80c>; }; - fman1_tx_0x2b: port@ab000 { - cell-index = <0x2b>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; - reg = <0xab000 0x1000>; + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; ++ fsl,qman-channel-id = <0x80d>; }; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x0c: port@8c000 { - cell-index = <0xc>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8c000 0x1000>; + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; ++ fsl,qman-channel-id = <0x80e>; ++ }; ++ ++ policer@c0000 { ++ compatible = "fsl,fman-policer"; ++ reg = <0xc0000 0x1000>; ++ }; ++ ++ keygen@c1000 { ++ compatible = "fsl,fman-keygen"; ++ reg = <0xc1000 0x1000>; ++ }; ++ ++ dma@c2000 { ++ compatible = "fsl,fman-dma"; ++ reg = <0xc2000 0x1000>; ++ }; ++ ++ fpm@c3000 { ++ compatible = "fsl,fman-fpm"; ++ reg = <0xc3000 0x1000>; ++ }; ++ ++ parser@c7000 { ++ compatible = "fsl,fman-parser"; ++ reg = <0xc7000 0x1000>; ++ }; ++ ++ vsps@dc000 { ++ compatible = "fsl,fman-vsps"; ++ reg = <0xdc000 0x1000>; }; - fman1_tx_0x2c: port@ac000 { - cell-index = <0x2c>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; - reg = <0xac000 0x1000>; + mdio0: mdio@fc000 { +@@ -73,9 +124,11 @@ fman0: fman@1a00000 { + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; }; ++}; ---- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi -+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi -@@ -35,13 +35,13 @@ - fman@500000 { - fman1_rx_0x0d: port@8d000 { - cell-index = <0xd>; -- compatible = "fsl,fman-v3-port-rx"; -+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx"; - reg = <0x8d000 0x1000>; - }; +- ptp_timer0: ptp-timer@fe000 { +- compatible = "fsl,fman-ptp-timer"; +- reg = <0xfe000 0x1000>; +- }; ++ptp_timer0: ptp-timer@1afe000 { ++ compatible = "fsl,fman-ptp-timer"; ++ reg = <0x0 0x1afe000 0x0 0x1000>; ++ interrupts = ; ++ clocks = <&clockgen 3 0>; + }; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi +@@ -0,0 +1,38 @@ ++/* ++ * QorIQ QMan SDK Portals device tree nodes ++ * ++ * Copyright 2011-2016 Freescale Semiconductor Inc. ++ * Copyright 2017 NXP ++ * ++ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) ++ */ ++ ++&qportals { ++ qman-fqids@0 { ++ compatible = "fsl,fqid-range"; ++ fsl,fqid-range = <256 256>; ++ }; ++ ++ qman-fqids@1 { ++ compatible = "fsl,fqid-range"; ++ fsl,fqid-range = <32768 32768>; ++ }; ++ ++ qman-pools@0 { ++ compatible = "fsl,pool-channel-range"; ++ fsl,pool-channel-range = <0x401 0xf>; ++ }; ++ ++ qman-cgrids@0 { ++ compatible = "fsl,cgrid-range"; ++ fsl,cgrid-range = <0 256>; ++ }; ++ ++ qman-ceetm@0 { ++ compatible = "fsl,qman-ceetm"; ++ fsl,ceetm-lfqid-range = <0xf00000 0x1000>; ++ fsl,ceetm-sp-range = <0 16>; ++ fsl,ceetm-lni-range = <0 8>; ++ fsl,ceetm-channel-range = <0 32>; ++ }; ++}; +--- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi ++++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +@@ -1,9 +1,9 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* + * QorIQ QMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * +- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ - fman1_tx_0x2d: port@ad000 { - cell-index = <0x2d>; -- compatible = "fsl,fman-v3-port-tx"; -+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx"; - reg = <0xad000 0x1000>; + &qportals { +@@ -77,4 +77,11 @@ + interrupts = ; + cell-index = <8>; }; - ++ ++ qportal9: qman-portal@90000 { ++ compatible = "fsl,qman-portal"; ++ reg = <0x90000 0x4000>, <0x4090000 0x4000>; ++ interrupts = ; ++ cell-index = <9>; ++ }; + }; +--- a/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts ++++ b/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts +@@ -330,3 +330,32 @@ + &sata { + status = "disabled"; + }; ++ ++/* Additions for Layerscape SDK (4.4/4.9) Kernel only ++ * These kernels need additional setup for FMan/QMan DMA shared memory ++ */ ++ ++#include "qoriq-qman-portals-sdk.dtsi" ++#include "qoriq-bman-portals-sdk.dtsi" ++ ++&bman_fbpr { ++ compatible = "fsl,bman-fbpr"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++&qman_fqd { ++ compatible = "fsl,qman-fqd"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++&qman_pfdr { ++ compatible = "fsl,qman-pfdr"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++ ++&soc { ++#include "qoriq-dpaa-eth.dtsi" ++#include "qoriq-fman3-0-6oh.dtsi" ++}; ++ ++&fman0 { ++ compatible = "fsl,fman", "simple-bus"; ++}; +--- a/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts ++++ b/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts +@@ -251,3 +251,32 @@ + &sata { + status = "disabled"; + }; ++ ++/* Additions for Layerscape SDK (4.4/4.9) Kernel only ++ * These kernels need additional setup for FMan/QMan DMA shared memory ++ */ ++ ++#include "qoriq-qman-portals-sdk.dtsi" ++#include "qoriq-bman-portals-sdk.dtsi" ++ ++&bman_fbpr { ++ compatible = "fsl,bman-fbpr"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++&qman_fqd { ++ compatible = "fsl,qman-fqd"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++&qman_pfdr { ++ compatible = "fsl,qman-pfdr"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++ ++&soc { ++#include "qoriq-dpaa-eth.dtsi" ++#include "qoriq-fman3-0-6oh.dtsi" ++}; ++ ++&fman0 { ++ compatible = "fsl,fman", "simple-bus"; ++}; diff --git a/target/linux/layerscape/patches-4.14/303-add-DTS-for-Traverse-LS1043-Boards.patch b/target/linux/layerscape/patches-4.14/303-add-DTS-for-Traverse-LS1043-Boards.patch deleted file mode 100644 index 68a9a3a2c4..0000000000 --- a/target/linux/layerscape/patches-4.14/303-add-DTS-for-Traverse-LS1043-Boards.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 263092cd68368ac6f030b847a1d5b0069bc2cef3 Mon Sep 17 00:00:00 2001 -From: Mathew McBride -Date: Tue, 17 Apr 2018 10:01:03 +1000 -Subject: [PATCH 05/40] add DTS for Traverse LS1043 Boards - -Signed-off-by: Mathew McBride ---- - arch/arm64/boot/dts/freescale/Makefile | 5 +++- - .../boot/dts/freescale/traverse-ls1043s.dts | 29 +++++++++++++++++++ - .../boot/dts/freescale/traverse-ls1043v.dts | 29 +++++++++++++++++++ - 3 files changed, 62 insertions(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/freescale/Makefile -+++ b/arch/arm64/boot/dts/freescale/Makefile -@@ -22,7 +22,10 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2 - dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb - dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb - dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb -- -+ -+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043v.dtb -+dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043s.dtb -+ - always := $(dtb-y) - subdir-y := $(dts-dirs) - clean-files := *.dtb ---- a/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts -+++ b/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts -@@ -330,3 +330,32 @@ - &sata { - status = "disabled"; - }; -+ -+/* Additions for Layerscape SDK (4.4/4.9) Kernel only -+ * These kernels need additional setup for FMan/QMan DMA shared memory -+ */ -+ -+#include "qoriq-qman-portals-sdk.dtsi" -+#include "qoriq-bman-portals-sdk.dtsi" -+ -+&bman_fbpr { -+ compatible = "fsl,bman-fbpr"; -+ alloc-ranges = <0 0 0x10000 0>; -+}; -+&qman_fqd { -+ compatible = "fsl,qman-fqd"; -+ alloc-ranges = <0 0 0x10000 0>; -+}; -+&qman_pfdr { -+ compatible = "fsl,qman-pfdr"; -+ alloc-ranges = <0 0 0x10000 0>; -+}; -+ -+&soc { -+#include "qoriq-dpaa-eth.dtsi" -+#include "qoriq-fman3-0-6oh.dtsi" -+}; -+ -+&fman0 { -+ compatible = "fsl,fman", "simple-bus"; -+}; ---- a/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts -+++ b/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts -@@ -251,3 +251,32 @@ - &sata { - status = "disabled"; - }; -+ -+/* Additions for Layerscape SDK (4.4/4.9) Kernel only -+ * These kernels need additional setup for FMan/QMan DMA shared memory -+ */ -+ -+#include "qoriq-qman-portals-sdk.dtsi" -+#include "qoriq-bman-portals-sdk.dtsi" -+ -+&bman_fbpr { -+ compatible = "fsl,bman-fbpr"; -+ alloc-ranges = <0 0 0x10000 0>; -+}; -+&qman_fqd { -+ compatible = "fsl,qman-fqd"; -+ alloc-ranges = <0 0 0x10000 0>; -+}; -+&qman_pfdr { -+ compatible = "fsl,qman-pfdr"; -+ alloc-ranges = <0 0 0x10000 0>; -+}; -+ -+&soc { -+#include "qoriq-dpaa-eth.dtsi" -+#include "qoriq-fman3-0-6oh.dtsi" -+}; -+ -+&fman0 { -+ compatible = "fsl,fman", "simple-bus"; -+}; diff --git a/target/linux/layerscape/patches-4.14/304-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch b/target/linux/layerscape/patches-4.14/304-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch deleted file mode 100644 index 37ddf88e55..0000000000 --- a/target/linux/layerscape/patches-4.14/304-arm-dts-ls1021a-Add-LS1021A-IOT-board-support.patch +++ /dev/null @@ -1,289 +0,0 @@ -From bb1a53f1bcb3f4c5983955a1d419c0e4e2531043 Mon Sep 17 00:00:00 2001 -From: Biwen Li -Date: Fri, 26 Oct 2018 16:00:37 +0800 -Subject: [PATCH 06/40] arm: dts: ls1021a: Add LS1021A-IOT board support - -Signed-off-by: Biwen Li ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/ls1021a-iot.dts | 262 ++++++++++++++++++++++++++++++ - 2 files changed, 264 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/ls1021a-iot.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -496,7 +496,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ - imx7s-warp.dtb - dtb-$(CONFIG_SOC_LS1021A) += \ - ls1021a-qds.dtb \ -- ls1021a-twr.dtb -+ ls1021a-twr.dtb \ -+ ls1021a-iot.dtb - dtb-$(CONFIG_SOC_VF610) += \ - vf500-colibri-eval-v3.dtb \ - vf610-colibri-eval-v3.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/ls1021a-iot.dts -@@ -0,0 +1,262 @@ -+/* -+ * Copyright 2013-2016 Freescale Semiconductor, Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+/dts-v1/; -+#include "ls1021a.dtsi" -+ -+/ { -+ model = "LS1021A IOT Board"; -+ -+ sys_mclk: clock-mclk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ reg_3p3v: regulator@0 { -+ compatible = "regulator-fixed"; -+ reg = <0>; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_2p5v: regulator@1 { -+ compatible = "regulator-fixed"; -+ reg = <1>; -+ regulator-name = "2P5V"; -+ regulator-min-microvolt = <2500000>; -+ regulator-max-microvolt = <2500000>; -+ regulator-always-on; -+ }; -+ }; -+ -+ sound { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,widgets = -+ "Microphone", "Microphone Jack", -+ "Headphone", "Headphone Jack", -+ "Speaker", "Speaker Ext", -+ "Line", "Line In Jack"; -+ simple-audio-card,routing = -+ "MIC_IN", "Microphone Jack", -+ "Microphone Jack", "Mic Bias", -+ "LINE_IN", "Line In Jack", -+ "Headphone Jack", "HP_OUT", -+ "Speaker Ext", "LINE_OUT"; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&sai2>; -+ frame-master; -+ bitclock-master; -+ }; -+ -+ simple-audio-card,codec { -+ sound-dai = <&codec>; -+ frame-master; -+ bitclock-master; -+ }; -+ }; -+ -+ firmware { -+ optee { -+ compatible = "linaro,optee-tz"; -+ method = "smc"; -+ }; -+ }; -+}; -+ -+&enet0 { -+ tbi-handle = <&tbi1>; -+ phy-handle = <&phy1>; -+ phy-connection-type = "sgmii"; -+ status = "okay"; -+}; -+ -+&enet1 { -+ tbi-handle = <&tbi1>; -+ phy-handle = <&phy3>; -+ phy-connection-type = "sgmii"; -+ status = "okay"; -+}; -+ -+&enet2 { -+ fixed-link = <0 1 1000 0 0>; -+ phy-connection-type = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&can0{ -+ status = "disabled"; -+}; -+ -+&can1{ -+ status = "disabled"; -+}; -+ -+&can2{ -+ status = "disabled"; -+}; -+ -+&can3{ -+ status = "okay"; -+}; -+ -+&esdhc{ -+ status = "okay"; -+}; -+ -+&i2c0 { -+ status = "okay"; -+ -+ max1239@35 { -+ compatible = "maxim,max1239"; -+ reg = <0x35>; -+ #io-channel-cells = <1>; -+ }; -+ -+ codec: sgtl5000@2a { -+ #sound-dai-cells=<0x0>; -+ compatible = "fsl,sgtl5000"; -+ reg = <0x2a>; -+ VDDA-supply = <®_3p3v>; -+ VDDIO-supply = <®_2p5v>; -+ clocks = <&sys_mclk 1>; -+ }; -+ -+ pca9555: pca9555@23 { -+ compatible = "nxp,pca9555"; -+ /*pinctrl-names = "default";*/ -+ /*interrupt-parent = <&gpio2>; -+ interrupts = <19 0x2>;*/ -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ reg = <0x23>; -+ }; -+ -+ ina220@44 { -+ compatible = "ti,ina220"; -+ reg = <0x44>; -+ shunt-resistor = <1000>; -+ }; -+ -+ ina220@45 { -+ compatible = "ti,ina220"; -+ reg = <0x45>; -+ shunt-resistor = <1000>; -+ }; -+ -+ lm75b@48 { -+ compatible = "nxp,lm75a"; -+ reg = <0x48>; -+ }; -+ -+ adt7461a@4c { -+ compatible = "adt7461a"; -+ reg = <0x4c>; -+ }; -+ -+ hdmi: sii9022a@39 { -+ compatible = "fsl,sii902x"; -+ reg = <0x39>; -+ interrupts = ; -+ }; -+}; -+ -+&i2c1 { -+ status = "disabled"; -+}; -+ -+&ifc { -+ status = "disabled"; -+}; -+ -+&lpuart0 { -+ status = "okay"; -+}; -+ -+&mdio0 { -+ phy0: ethernet-phy@0 { -+ reg = <0x0>; -+ }; -+ phy1: ethernet-phy@1 { -+ reg = <0x1>; -+ }; -+ phy2: ethernet-phy@2 { -+ reg = <0x2>; -+ }; -+ phy3: ethernet-phy@3 { -+ reg = <0x3>; -+ }; -+ tbi1: tbi-phy@1f { -+ reg = <0x1f>; -+ device_type = "tbi-phy"; -+ }; -+}; -+ -+&qspi { -+ num-cs = <2>; -+ status = "okay"; -+ -+ qflash0: s25fl128s@0 { -+ compatible = "spansion,s25fl129p1"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <20000000>; -+ reg = <0>; -+ }; -+}; -+ -+&sai2 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&uart1 { -+ status = "okay"; -+}; -+ -+&dcu { -+ display = <&display>; -+ status = "okay"; -+ -+ display: display@0 { -+ bits-per-pixel = <24>; -+ -+ display-timings { -+ native-mode = <&timing0>; -+ -+ timing0: mode0 { -+ clock-frequency = <25000000>; -+ hactive = <640>; -+ vactive = <480>; -+ hback-porch = <80>; -+ hfront-porch = <80>; -+ vback-porch = <16>; -+ vfront-porch = <16>; -+ hsync-len = <12>; -+ vsync-len = <2>; -+ hsync-active = <1>; -+ vsync-active = <1>; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/layerscape/patches-4.14/701-dpaa2-dpio-support-layerscape.patch b/target/linux/layerscape/patches-4.14/701-dpaa2-dpio-support-layerscape.patch index 34514caa0c..ce5dfdbe86 100644 --- a/target/linux/layerscape/patches-4.14/701-dpaa2-dpio-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/701-dpaa2-dpio-support-layerscape.patch @@ -1,20 +1,27 @@ -From ede8d823f0e1b2c5e14cbac13839b818ed1c18cf Mon Sep 17 00:00:00 2001 +From 80df9e62536d7cac5c03a4fcb494c6ddf0723633 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:10 +0800 -Subject: [PATCH 07/40] apaa2-dpio:support layerscape +Date: Wed, 17 Apr 2019 18:58:27 +0800 +Subject: [PATCH] dpaa2-dpio: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + This is an integrated patch of dpaa2-dpio for layerscape Signed-off-by: Bharat Bhushan +Signed-off-by: Biwen Li Signed-off-by: Bogdan Purcareata Signed-off-by: Greg Kroah-Hartman Signed-off-by: Guanhua Gao Signed-off-by: Haiying Wang Signed-off-by: Horia Geantă +Signed-off-by: Ioana Ciornei Signed-off-by: Ioana Radulescu Signed-off-by: Laurentiu Tudor +Signed-off-by: Li Yang Signed-off-by: Radu Alexe Signed-off-by: Roy Pledge -Signed-off-by: Biwen Li +Signed-off-by: Youri Querry --- drivers/staging/fsl-mc/Kconfig | 1 + drivers/staging/fsl-mc/Makefile | 1 + @@ -26,12 +33,12 @@ Signed-off-by: Biwen Li drivers/staging/fsl-mc/bus/dpcon.c | 32 +- drivers/staging/fsl-mc/bus/dpio/Makefile | 3 +- drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h | 29 +- - drivers/staging/fsl-mc/bus/dpio/dpio-driver.c | 53 ++-- - .../staging/fsl-mc/bus/dpio/dpio-service.c | 258 +++++++++++++--- - drivers/staging/fsl-mc/bus/dpio/dpio.c | 51 ++-- + drivers/staging/fsl-mc/bus/dpio/dpio-driver.c | 99 ++-- + .../staging/fsl-mc/bus/dpio/dpio-service.c | 295 +++++++++--- + drivers/staging/fsl-mc/bus/dpio/dpio.c | 51 +-- drivers/staging/fsl-mc/bus/dpio/dpio.h | 32 +- - .../staging/fsl-mc/bus/dpio/qbman-portal.c | 217 ++++++++++--- - .../staging/fsl-mc/bus/dpio/qbman-portal.h | 112 ++++--- + .../staging/fsl-mc/bus/dpio/qbman-portal.c | 421 ++++++++++++++---- + .../staging/fsl-mc/bus/dpio/qbman-portal.h | 134 ++++-- drivers/staging/fsl-mc/bus/dpmcp.c | 28 +- drivers/staging/fsl-mc/bus/dprc-driver.c | 4 +- drivers/staging/fsl-mc/bus/dprc.c | 28 +- @@ -42,14 +49,14 @@ Signed-off-by: Biwen Li .../fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c | 4 +- drivers/staging/fsl-mc/bus/mc-io.c | 28 +- drivers/staging/fsl-mc/bus/mc-sys.c | 28 +- - drivers/staging/fsl-mc/include/dpaa2-fd.h | 288 ++++++++++++++++-- + drivers/staging/fsl-mc/include/dpaa2-fd.h | 288 ++++++++++-- drivers/staging/fsl-mc/include/dpaa2-global.h | 27 +- - drivers/staging/fsl-mc/include/dpaa2-io.h | 97 ++++-- + drivers/staging/fsl-mc/include/dpaa2-io.h | 110 +++-- drivers/staging/fsl-mc/include/dpbp.h | 29 +- drivers/staging/fsl-mc/include/dpcon.h | 32 +- - drivers/staging/fsl-mc/include/dpopr.h | 110 +++++++ + drivers/staging/fsl-mc/include/dpopr.h | 110 +++++ drivers/staging/fsl-mc/include/mc.h | 4 +- - 33 files changed, 970 insertions(+), 634 deletions(-) + 33 files changed, 1233 insertions(+), 693 deletions(-) create mode 100644 drivers/staging/fsl-mc/include/dpopr.h --- a/drivers/staging/fsl-mc/Kconfig @@ -347,15 +354,33 @@ Signed-off-by: Biwen Li */ #include -@@ -114,6 +89,7 @@ static int dpaa2_dpio_probe(struct fsl_m +@@ -38,6 +13,7 @@ + #include + #include + #include ++#include + + #include "../../include/mc.h" + #include "../../include/dpaa2-io.h" +@@ -54,6 +30,8 @@ struct dpio_priv { + struct dpaa2_io *io; + }; + ++static cpumask_var_t cpus_unused_mask; ++ + static irqreturn_t dpio_irq_handler(int irq_num, void *arg) + { + struct device *dev = (struct device *)arg; +@@ -113,7 +91,7 @@ static int dpaa2_dpio_probe(struct fsl_m + struct dpio_priv *priv; int err = -ENOMEM; struct device *dev = &dpio_dev->dev; - static int next_cpu = -1; +- static int next_cpu = -1; + int possible_next_cpu; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) -@@ -135,6 +111,12 @@ static int dpaa2_dpio_probe(struct fsl_m +@@ -135,6 +113,12 @@ static int dpaa2_dpio_probe(struct fsl_m goto err_open; } @@ -368,39 +393,75 @@ Signed-off-by: Biwen Li err = dpio_get_attributes(dpio_dev->mc_io, 0, dpio_dev->mc_handle, &dpio_attrs); if (err) { -@@ -156,23 +138,23 @@ static int dpaa2_dpio_probe(struct fsl_m +@@ -155,26 +139,35 @@ static int dpaa2_dpio_probe(struct fsl_m + desc.dpio_id = dpio_dev->obj_desc.id; /* get the cpu to use for the affinity hint */ - if (next_cpu == -1) +- if (next_cpu == -1) - next_cpu = cpumask_first(cpu_online_mask); -+ possible_next_cpu = cpumask_first(cpu_online_mask); - else +- else - next_cpu = cpumask_next(next_cpu, cpu_online_mask); -+ possible_next_cpu = cpumask_next(next_cpu, cpu_online_mask); - +- - if (!cpu_possible(next_cpu)) { ++ possible_next_cpu = cpumask_first(cpus_unused_mask); + if (possible_next_cpu >= nr_cpu_ids) { dev_err(dev, "probe failed. Number of DPIOs exceeds NR_CPUS.\n"); err = -ERANGE; goto err_allocate_irqs; } - desc.cpu = next_cpu; -+ desc.cpu = next_cpu = possible_next_cpu; ++ desc.cpu = possible_next_cpu; ++ cpumask_clear_cpu(possible_next_cpu, cpus_unused_mask); - /* +- /* - * Set the CENA regs to be the cache inhibited area of the portal to - * avoid coherency issues if a user migrates to another core. -+ * Set the CENA regs to be the cache enabled area of the portal to -+ * achieve the best performance. - */ +- */ - desc.regs_cena = ioremap_wc(dpio_dev->regions[1].start, - resource_size(&dpio_dev->regions[1])); -+ desc.regs_cena = ioremap_cache_ns(dpio_dev->regions[0].start, -+ resource_size(&dpio_dev->regions[0])); - desc.regs_cinh = ioremap(dpio_dev->regions[1].start, - resource_size(&dpio_dev->regions[1])); +- desc.regs_cinh = ioremap(dpio_dev->regions[1].start, +- resource_size(&dpio_dev->regions[1])); ++ if (dpio_dev->obj_desc.region_count < 3) { ++ /* No support for DDR backed portals, use classic mapping */ ++ desc.regs_cena = ioremap_cache_ns(dpio_dev->regions[0].start, ++ resource_size(&dpio_dev->regions[0])); ++ } else { ++ desc.regs_cena = memremap(dpio_dev->regions[2].start, ++ resource_size(&dpio_dev->regions[2]), ++ MEMREMAP_WB); ++ } ++ if (IS_ERR(desc.regs_cena)) { ++ dev_err(dev, "ioremap_cache_ns failed\n"); ++ goto err_allocate_irqs; ++ } ++ ++ desc.regs_cinh = devm_ioremap(dev, dpio_dev->regions[1].start, ++ resource_size(&dpio_dev->regions[1])); ++ if (!desc.regs_cinh) { ++ dev_err(dev, "devm_ioremap failed\n"); ++ goto err_allocate_irqs; ++ } + + err = fsl_mc_allocate_irqs(dpio_dev); + if (err) { +@@ -186,7 +179,7 @@ static int dpaa2_dpio_probe(struct fsl_m + if (err) + goto err_register_dpio_irq; + +- priv->io = dpaa2_io_create(&desc); ++ priv->io = dpaa2_io_create(&desc, dev); + if (!priv->io) { + dev_err(dev, "dpaa2_io_create failed\n"); + goto err_dpaa2_io_create; +@@ -196,7 +189,6 @@ static int dpaa2_dpio_probe(struct fsl_m + dev_dbg(dev, " receives_notifications = %d\n", + desc.receives_notifications); + dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle); +- fsl_mc_portal_free(dpio_dev->mc_io); -@@ -207,6 +189,7 @@ err_register_dpio_irq: + return 0; + +@@ -207,6 +199,7 @@ err_register_dpio_irq: err_allocate_irqs: dpio_disable(dpio_dev->mc_io, 0, dpio_dev->mc_handle); err_get_attr: @@ -408,6 +469,55 @@ Signed-off-by: Biwen Li dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle); err_open: fsl_mc_portal_free(dpio_dev->mc_io); +@@ -227,7 +220,7 @@ static int dpaa2_dpio_remove(struct fsl_ + { + struct device *dev; + struct dpio_priv *priv; +- int err; ++ int err = 0, cpu; + + dev = &dpio_dev->dev; + priv = dev_get_drvdata(dev); +@@ -236,11 +229,8 @@ static int dpaa2_dpio_remove(struct fsl_ + + dpio_teardown_irqs(dpio_dev); + +- err = fsl_mc_portal_allocate(dpio_dev, 0, &dpio_dev->mc_io); +- if (err) { +- dev_err(dev, "MC portal allocation failed\n"); +- goto err_mcportal; +- } ++ cpu = dpaa2_io_get_cpu(priv->io); ++ cpumask_set_cpu(cpu, cpus_unused_mask); + + err = dpio_open(dpio_dev->mc_io, 0, dpio_dev->obj_desc.id, + &dpio_dev->mc_handle); +@@ -261,7 +251,7 @@ static int dpaa2_dpio_remove(struct fsl_ + + err_open: + fsl_mc_portal_free(dpio_dev->mc_io); +-err_mcportal: ++ + return err; + } + +@@ -285,11 +275,16 @@ static struct fsl_mc_driver dpaa2_dpio_d + + static int dpio_driver_init(void) + { ++ if (!zalloc_cpumask_var(&cpus_unused_mask, GFP_KERNEL)) ++ return -ENOMEM; ++ cpumask_copy(cpus_unused_mask, cpu_online_mask); ++ + return fsl_mc_driver_register(&dpaa2_dpio_driver); + } + + static void dpio_driver_exit(void) + { ++ free_cpumask_var(cpus_unused_mask); + fsl_mc_driver_unregister(&dpaa2_dpio_driver); + } + module_init(dpio_driver_init); --- a/drivers/staging/fsl-mc/bus/dpio/dpio-service.c +++ b/drivers/staging/fsl-mc/bus/dpio/dpio-service.c @@ -1,33 +1,8 @@ @@ -453,7 +563,15 @@ Signed-off-by: Biwen Li struct dpaa2_io_desc dpio_desc; struct qbman_swp_desc swp_desc; struct qbman_swp *swp; -@@ -83,7 +57,7 @@ static inline struct dpaa2_io *service_s +@@ -53,6 +27,7 @@ struct dpaa2_io { + /* protect notifications list */ + spinlock_t lock_notifications; + struct list_head notifications; ++ struct device *dev; + }; + + struct dpaa2_io_store { +@@ -83,7 +58,7 @@ static inline struct dpaa2_io *service_s * If cpu == -1, choose the current cpu, with no guarantees about * potentially being migrated away. */ @@ -462,7 +580,7 @@ Signed-off-by: Biwen Li cpu = smp_processor_id(); /* If a specific cpu was requested, pick it up immediately */ -@@ -95,6 +69,10 @@ static inline struct dpaa2_io *service_s +@@ -95,6 +70,10 @@ static inline struct dpaa2_io *service_s if (d) return d; @@ -473,7 +591,7 @@ Signed-off-by: Biwen Li spin_lock(&dpio_list_lock); d = list_entry(dpio_list.next, struct dpaa2_io, node); list_del(&d->node); -@@ -105,6 +83,23 @@ static inline struct dpaa2_io *service_s +@@ -105,15 +84,34 @@ static inline struct dpaa2_io *service_s } /** @@ -496,8 +614,20 @@ Signed-off-by: Biwen Li +/** * dpaa2_io_create() - create a dpaa2_io object. * @desc: the dpaa2_io descriptor ++ * @dev: the actual DPIO device + * + * Activates a "struct dpaa2_io" corresponding to the given config of an actual + * DPIO object. * -@@ -126,7 +121,6 @@ struct dpaa2_io *dpaa2_io_create(const s + * Return a valid dpaa2_io object for success, or NULL for failure. + */ +-struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc) ++struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc, ++ struct device *dev) + { + struct dpaa2_io *obj = kmalloc(sizeof(*obj), GFP_KERNEL); + +@@ -126,7 +124,6 @@ struct dpaa2_io *dpaa2_io_create(const s return NULL; } @@ -505,15 +635,19 @@ Signed-off-by: Biwen Li obj->dpio_desc = *desc; obj->swp_desc.cena_bar = obj->dpio_desc.regs_cena; obj->swp_desc.cinh_bar = obj->dpio_desc.regs_cinh; -@@ -158,7 +152,6 @@ struct dpaa2_io *dpaa2_io_create(const s +@@ -156,9 +153,10 @@ struct dpaa2_io *dpaa2_io_create(const s + dpio_by_cpu[desc->cpu] = obj; + spin_unlock(&dpio_list_lock); ++ obj->dev = dev; ++ return obj; } -EXPORT_SYMBOL(dpaa2_io_create); /** * dpaa2_io_down() - release the dpaa2_io object. -@@ -171,11 +164,8 @@ EXPORT_SYMBOL(dpaa2_io_create); +@@ -171,11 +169,8 @@ EXPORT_SYMBOL(dpaa2_io_create); */ void dpaa2_io_down(struct dpaa2_io *d) { @@ -525,7 +659,7 @@ Signed-off-by: Biwen Li #define DPAA_POLL_MAX 32 -@@ -206,7 +196,7 @@ irqreturn_t dpaa2_io_irq(struct dpaa2_io +@@ -206,7 +201,7 @@ irqreturn_t dpaa2_io_irq(struct dpaa2_io u64 q64; q64 = qbman_result_SCN_ctx(dq); @@ -534,25 +668,54 @@ Signed-off-by: Biwen Li ctx->cb(ctx); } else { pr_crit("fsl-mc-dpio: Unrecognised/ignored DQRR entry\n"); -@@ -222,7 +212,6 @@ done: +@@ -222,13 +217,19 @@ done: qbman_swp_interrupt_set_inhibit(swp, 0); return IRQ_HANDLED; } -EXPORT_SYMBOL(dpaa2_io_irq); ++ ++int dpaa2_io_get_cpu(struct dpaa2_io *d) ++{ ++ return d->dpio_desc.cpu; ++} ++EXPORT_SYMBOL(dpaa2_io_get_cpu); /** * dpaa2_io_service_register() - Prepare for servicing of FQDAN or CDAN -@@ -252,7 +241,7 @@ int dpaa2_io_service_register(struct dpa + * notifications on the given DPIO service. + * @d: the given DPIO service. + * @ctx: the notification context. ++ * @dev: the device that requests the register + * + * The caller should make the MC command to attach a DPAA2 object to + * a DPIO after this function completes successfully. In that way: +@@ -243,7 +244,8 @@ EXPORT_SYMBOL(dpaa2_io_irq); + * Return 0 for success, or -ENODEV for failure. + */ + int dpaa2_io_service_register(struct dpaa2_io *d, +- struct dpaa2_io_notification_ctx *ctx) ++ struct dpaa2_io_notification_ctx *ctx, ++ struct device *dev) + { + unsigned long irqflags; + +@@ -251,8 +253,10 @@ int dpaa2_io_service_register(struct dpa + if (!d) return -ENODEV; ++ device_link_add(dev, d->dev, DL_FLAG_AUTOREMOVE_SUPPLIER); ++ ctx->dpio_id = d->dpio_desc.dpio_id; - ctx->qman64 = (u64)ctx; + ctx->qman64 = (u64)(uintptr_t)ctx; ctx->dpio_private = d; spin_lock_irqsave(&d->lock_notifications, irqflags); list_add(&ctx->node, &d->notifications); -@@ -265,7 +254,7 @@ int dpaa2_io_service_register(struct dpa +@@ -263,20 +267,23 @@ int dpaa2_io_service_register(struct dpa + return qbman_swp_CDAN_set_context_enable(d->swp, + (u16)ctx->id, ctx->qman64); ++ return 0; } -EXPORT_SYMBOL(dpaa2_io_service_register); @@ -560,16 +723,33 @@ Signed-off-by: Biwen Li /** * dpaa2_io_service_deregister - The opposite of 'register'. -@@ -288,7 +277,7 @@ void dpaa2_io_service_deregister(struct + * @service: the given DPIO service. + * @ctx: the notification context. ++ * @dev: the device that requests to be deregistered + * + * This function should be called only after sending the MC command to + * to detach the notification-producing device from the DPIO. + */ + void dpaa2_io_service_deregister(struct dpaa2_io *service, +- struct dpaa2_io_notification_ctx *ctx) ++ struct dpaa2_io_notification_ctx *ctx, ++ struct device *dev) + { + struct dpaa2_io *d = ctx->dpio_private; + unsigned long irqflags; +@@ -287,8 +294,10 @@ void dpaa2_io_service_deregister(struct + spin_lock_irqsave(&d->lock_notifications, irqflags); list_del(&ctx->node); spin_unlock_irqrestore(&d->lock_notifications, irqflags); ++ ++ device_link_remove(dev, d->dev); } -EXPORT_SYMBOL(dpaa2_io_service_deregister); +EXPORT_SYMBOL_GPL(dpaa2_io_service_deregister); /** * dpaa2_io_service_rearm() - Rearm the notification for the given DPIO service. -@@ -322,7 +311,7 @@ int dpaa2_io_service_rearm(struct dpaa2_ +@@ -322,7 +331,7 @@ int dpaa2_io_service_rearm(struct dpaa2_ return err; } @@ -578,7 +758,7 @@ Signed-off-by: Biwen Li /** * dpaa2_io_service_pull_fq() - pull dequeue functions from a fq. -@@ -385,7 +374,7 @@ int dpaa2_io_service_pull_channel(struct +@@ -385,7 +394,7 @@ int dpaa2_io_service_pull_channel(struct return err; } @@ -587,7 +767,7 @@ Signed-off-by: Biwen Li /** * dpaa2_io_service_enqueue_fq() - Enqueue a frame to a frame queue. -@@ -441,7 +430,7 @@ int dpaa2_io_service_enqueue_qd(struct d +@@ -441,7 +450,7 @@ int dpaa2_io_service_enqueue_qd(struct d return qbman_swp_enqueue(d->swp, &ed, fd); } @@ -596,7 +776,7 @@ Signed-off-by: Biwen Li /** * dpaa2_io_service_release() - Release buffers to a buffer pool. -@@ -453,7 +442,7 @@ EXPORT_SYMBOL(dpaa2_io_service_enqueue_q +@@ -453,7 +462,7 @@ EXPORT_SYMBOL(dpaa2_io_service_enqueue_q * Return 0 for success, and negative error code for failure. */ int dpaa2_io_service_release(struct dpaa2_io *d, @@ -605,7 +785,7 @@ Signed-off-by: Biwen Li const u64 *buffers, unsigned int num_buffers) { -@@ -468,7 +457,7 @@ int dpaa2_io_service_release(struct dpaa +@@ -468,7 +477,7 @@ int dpaa2_io_service_release(struct dpaa return qbman_swp_release(d->swp, &rd, buffers, num_buffers); } @@ -614,7 +794,7 @@ Signed-off-by: Biwen Li /** * dpaa2_io_service_acquire() - Acquire buffers from a buffer pool. -@@ -482,7 +471,7 @@ EXPORT_SYMBOL(dpaa2_io_service_release); +@@ -482,7 +491,7 @@ EXPORT_SYMBOL(dpaa2_io_service_release); * Eg. if the buffer pool is empty, this will return zero. */ int dpaa2_io_service_acquire(struct dpaa2_io *d, @@ -623,7 +803,7 @@ Signed-off-by: Biwen Li u64 *buffers, unsigned int num_buffers) { -@@ -499,7 +488,7 @@ int dpaa2_io_service_acquire(struct dpaa +@@ -499,7 +508,7 @@ int dpaa2_io_service_acquire(struct dpaa return err; } @@ -632,7 +812,7 @@ Signed-off-by: Biwen Li /* * 'Stores' are reusable memory blocks for holding dequeue results, and to -@@ -553,7 +542,7 @@ struct dpaa2_io_store *dpaa2_io_store_cr +@@ -553,7 +562,7 @@ struct dpaa2_io_store *dpaa2_io_store_cr return ret; } @@ -641,7 +821,7 @@ Signed-off-by: Biwen Li /** * dpaa2_io_store_destroy() - Frees the dma memory storage for dequeue -@@ -567,7 +556,7 @@ void dpaa2_io_store_destroy(struct dpaa2 +@@ -567,7 +576,7 @@ void dpaa2_io_store_destroy(struct dpaa2 kfree(s->alloced_addr); kfree(s); } @@ -650,7 +830,13 @@ Signed-off-by: Biwen Li /** * dpaa2_io_store_next() - Determine when the next dequeue result is available. -@@ -615,4 +604,177 @@ struct dpaa2_dq *dpaa2_io_store_next(str +@@ -610,9 +619,193 @@ struct dpaa2_dq *dpaa2_io_store_next(str + if (!(dpaa2_dq_flags(ret) & DPAA2_DQ_STAT_VALIDFRAME)) + ret = NULL; + } else { ++ prefetch(&s->vaddr[s->idx]); + *is_last = 0; + } return ret; } @@ -820,10 +1006,20 @@ Signed-off-by: Biwen Li +{ + struct qbman_eq_desc ed; + struct dpaa2_fd fd; ++ unsigned long irqflags; ++ int ret; + + d = service_select(d); + if (!d) + return -ENODEV; ++ ++ if ((d->swp->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) { ++ spin_lock_irqsave(&d->lock_mgmt_cmd, irqflags); ++ ret = qbman_orp_drop(d->swp, orpid, seqnum); ++ spin_unlock_irqrestore(&d->lock_mgmt_cmd, irqflags); ++ return ret; ++ } ++ + qbman_eq_desc_clear(&ed); + qbman_eq_desc_set_orp_hole(&ed, orpid, seqnum); + return qbman_swp_enqueue(d->swp, &ed, &fd); @@ -978,7 +1174,53 @@ Signed-off-by: Biwen Li */ #include -@@ -99,6 +74,14 @@ enum qbman_sdqcr_fc { +@@ -37,23 +12,26 @@ + + #include "qbman-portal.h" + +-#define QMAN_REV_4000 0x04000000 +-#define QMAN_REV_4100 0x04010000 +-#define QMAN_REV_4101 0x04010001 +-#define QMAN_REV_MASK 0xffff0000 +- + /* All QBMan command and result structures use this "valid bit" encoding */ + #define QB_VALID_BIT ((u32)0x80) + + /* QBMan portal management command codes */ + #define QBMAN_MC_ACQUIRE 0x30 + #define QBMAN_WQCHAN_CONFIGURE 0x46 ++#define QBMAN_MC_ORP 0x63 + + /* CINH register offsets */ ++#define QBMAN_CINH_SWP_EQCR_PI 0x800 + #define QBMAN_CINH_SWP_EQAR 0x8c0 ++#define QBMAN_CINH_SWP_CR_RT 0x900 ++#define QBMAN_CINH_SWP_VDQCR_RT 0x940 ++#define QBMAN_CINH_SWP_EQCR_AM_RT 0x980 ++#define QBMAN_CINH_SWP_RCR_AM_RT 0x9c0 + #define QBMAN_CINH_SWP_DQPI 0xa00 + #define QBMAN_CINH_SWP_DCAP 0xac0 + #define QBMAN_CINH_SWP_SDQCR 0xb00 ++#define QBMAN_CINH_SWP_EQCR_AM_RT2 0xb40 ++#define QBMAN_CINH_SWP_RCR_PI 0xc00 + #define QBMAN_CINH_SWP_RAR 0xcc0 + #define QBMAN_CINH_SWP_ISR 0xe00 + #define QBMAN_CINH_SWP_IER 0xe40 +@@ -68,6 +46,13 @@ + #define QBMAN_CENA_SWP_RR(vb) (0x700 + ((u32)(vb) >> 1)) + #define QBMAN_CENA_SWP_VDQCR 0x780 + ++/* CENA register offsets in memory-backed mode */ ++#define QBMAN_CENA_SWP_DQRR_MEM(n) (0x800 + ((u32)(n) << 6)) ++#define QBMAN_CENA_SWP_RCR_MEM(n) (0x1400 + ((u32)(n) << 6)) ++#define QBMAN_CENA_SWP_CR_MEM 0x1600 ++#define QBMAN_CENA_SWP_RR_MEM 0x1680 ++#define QBMAN_CENA_SWP_VDQCR_MEM 0x1780 ++ + /* Reverse mapping of QBMAN_CENA_SWP_DQRR() */ + #define QBMAN_IDX_FROM_DQRR(p) (((unsigned long)(p) & 0x1ff) >> 6) + +@@ -99,6 +84,14 @@ enum qbman_sdqcr_fc { qbman_sdqcr_fc_up_to_3 = 1 }; @@ -993,32 +1235,139 @@ Signed-off-by: Biwen Li /* Portal Access */ static inline u32 qbman_read_register(struct qbman_swp *p, u32 offset) -@@ -189,7 +172,7 @@ struct qbman_swp *qbman_swp_init(const s +@@ -121,10 +114,13 @@ static inline void *qbman_get_cmd(struct + + #define SWP_CFG_DQRR_MF_SHIFT 20 + #define SWP_CFG_EST_SHIFT 16 ++#define SWP_CFG_CPBS_SHIFT 15 + #define SWP_CFG_WN_SHIFT 14 + #define SWP_CFG_RPM_SHIFT 12 + #define SWP_CFG_DCM_SHIFT 10 + #define SWP_CFG_EPM_SHIFT 8 ++#define SWP_CFG_VPM_SHIFT 7 ++#define SWP_CFG_CPM_SHIFT 6 + #define SWP_CFG_SD_SHIFT 5 + #define SWP_CFG_SP_SHIFT 4 + #define SWP_CFG_SE_SHIFT 3 +@@ -150,6 +146,8 @@ static inline u32 qbman_set_swp_cfg(u8 m + ep << SWP_CFG_EP_SHIFT); + } + ++#define QMAN_RT_MODE 0x00000100 ++ + /** + * qbman_swp_init() - Create a functional object representing the given + * QBMan portal descriptor. +@@ -171,6 +169,8 @@ struct qbman_swp *qbman_swp_init(const s + p->sdq |= qbman_sdqcr_dct_prio_ics << QB_SDQCR_DCT_SHIFT; + p->sdq |= qbman_sdqcr_fc_up_to_3 << QB_SDQCR_FC_SHIFT; + p->sdq |= QMAN_SDQCR_TOKEN << QB_SDQCR_TOK_SHIFT; ++ if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) ++ p->mr.valid_bit = QB_VALID_BIT; + + atomic_set(&p->vdq.available, 1); + p->vdq.valid_bit = QB_VALID_BIT; +@@ -188,8 +188,11 @@ struct qbman_swp *qbman_swp_init(const s + p->addr_cena = d->cena_bar; p->addr_cinh = d->cinh_bar; ++ if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) ++ memset(p->addr_cena, 0, 64 * 1024); ++ reg = qbman_set_swp_cfg(p->dqrr.dqrr_size, - 1, /* Writes Non-cacheable */ + 0, /* Writes cacheable */ 0, /* EQCR_CI stashing threshold */ 3, /* RPM: Valid bit mode, RCR in array mode */ 2, /* DCM: Discrete consumption ack mode */ -@@ -315,6 +298,7 @@ void qbman_swp_mc_submit(struct qbman_sw +@@ -200,6 +203,10 @@ struct qbman_swp *qbman_swp_init(const s + 1, /* dequeue stashing priority == TRUE */ + 0, /* dequeue stashing enable == FALSE */ + 0); /* EQCR_CI stashing priority == FALSE */ ++ if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) ++ reg |= 1 << SWP_CFG_CPBS_SHIFT | /* memory-backed mode */ ++ 1 << SWP_CFG_VPM_SHIFT | /* VDQCR read triggered mode */ ++ 1 << SWP_CFG_CPM_SHIFT; /* CR read triggered mode */ + + qbman_write_register(p, QBMAN_CINH_SWP_CFG, reg); + reg = qbman_read_register(p, QBMAN_CINH_SWP_CFG); +@@ -208,6 +215,10 @@ struct qbman_swp *qbman_swp_init(const s + return NULL; + } - dma_wmb(); - *v = cmd_verb | p->mc.valid_bit; -+ dccvac(cmd); ++ if ((p->desc->qman_version & QMAN_REV_MASK) >= QMAN_REV_5000) { ++ qbman_write_register(p, QBMAN_CINH_SWP_EQCR_PI, QMAN_RT_MODE); ++ qbman_write_register(p, QBMAN_CINH_SWP_RCR_PI, QMAN_RT_MODE); ++ } + /* + * SDQCR needs to be initialized to 0 when no channels are + * being dequeued from or else the QMan HW will indicate an +@@ -302,7 +313,10 @@ void qbman_swp_interrupt_set_inhibit(str + */ + void *qbman_swp_mc_start(struct qbman_swp *p) + { +- return qbman_get_cmd(p, QBMAN_CENA_SWP_CR); ++ if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) ++ return qbman_get_cmd(p, QBMAN_CENA_SWP_CR); ++ else ++ return qbman_get_cmd(p, QBMAN_CENA_SWP_CR_MEM); + } + + /* +@@ -313,8 +327,15 @@ void qbman_swp_mc_submit(struct qbman_sw + { + u8 *v = cmd; + +- dma_wmb(); +- *v = cmd_verb | p->mc.valid_bit; ++ if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) { ++ dma_wmb(); ++ *v = cmd_verb | p->mc.valid_bit; ++ dccvac(cmd); ++ } else { ++ *v = cmd_verb | p->mc.valid_bit; ++ dma_wmb(); ++ qbman_write_register(p, QBMAN_CINH_SWP_CR_RT, QMAN_RT_MODE); ++ } } /* -@@ -325,6 +309,7 @@ void *qbman_swp_mc_result(struct qbman_s +@@ -325,13 +346,28 @@ void *qbman_swp_mc_result(struct qbman_s { u32 *ret, verb; -+ qbman_inval_prefetch(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit)); - ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit)); +- ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit)); ++ if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) { ++ qbman_inval_prefetch(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit)); ++ ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit)); ++ /* Remove the valid-bit - command completed if the rest ++ * is non-zero. ++ */ ++ verb = ret[0] & ~QB_VALID_BIT; ++ if (!verb) ++ return NULL; ++ p->mc.valid_bit ^= QB_VALID_BIT; ++ } else { ++ ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR_MEM); ++ /* Command completed if the valid bit is toggled */ ++ if (p->mr.valid_bit != (ret[0] & QB_VALID_BIT)) ++ return NULL; ++ /* Command completed if the rest is non-zero */ ++ verb = ret[0] & ~QB_VALID_BIT; ++ if (!verb) ++ return NULL; ++ p->mr.valid_bit ^= QB_VALID_BIT; ++ } - /* Remove the valid-bit - command completed if the rest is non-zero */ -@@ -370,6 +355,43 @@ void qbman_eq_desc_set_no_orp(struct qbm +- /* Remove the valid-bit - command completed if the rest is non-zero */ +- verb = ret[0] & ~QB_VALID_BIT; +- if (!verb) +- return NULL; +- p->mc.valid_bit ^= QB_VALID_BIT; + return ret; + } + +@@ -370,6 +406,43 @@ void qbman_eq_desc_set_no_orp(struct qbm d->verb |= enqueue_rejects_to_fq; } @@ -1062,7 +1411,26 @@ Signed-off-by: Biwen Li /* * Exactly one of the following descriptor "targets" should be set. (Calling any * one of these will replace the effect of any prior call to one of these.) -@@ -429,12 +451,23 @@ int qbman_swp_enqueue(struct qbman_swp * +@@ -408,6 +481,18 @@ void qbman_eq_desc_set_qd(struct qbman_e + #define EQAR_VB(eqar) ((eqar) & 0x80) + #define EQAR_SUCCESS(eqar) ((eqar) & 0x100) + ++static inline void qbman_write_eqcr_am_rt_register(struct qbman_swp *p, ++ u8 idx) ++{ ++ if (idx < 16) ++ qbman_write_register(p, QBMAN_CINH_SWP_EQCR_AM_RT + idx * 4, ++ QMAN_RT_MODE); ++ else ++ qbman_write_register(p, QBMAN_CINH_SWP_EQCR_AM_RT2 + ++ (idx - 16) * 4, ++ QMAN_RT_MODE); ++} ++ + /** + * qbman_swp_enqueue() - Issue an enqueue command + * @s: the software portal used for enqueue +@@ -429,12 +514,29 @@ int qbman_swp_enqueue(struct qbman_swp * return -EBUSY; p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar))); @@ -1080,14 +1448,23 @@ Signed-off-by: Biwen Li + memcpy(&p->tgtid, &d->tgtid, 24); memcpy(&p->fd, fd, sizeof(*fd)); - /* Set the verb byte, have to substitute in the valid-bit */ - dma_wmb(); - p->verb = d->verb | EQAR_VB(eqar); -+ dccvac(p); +- /* Set the verb byte, have to substitute in the valid-bit */ +- dma_wmb(); +- p->verb = d->verb | EQAR_VB(eqar); ++ if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) { ++ /* Set the verb byte, have to substitute in the valid-bit */ ++ dma_wmb(); ++ p->verb = d->verb | EQAR_VB(eqar); ++ dccvac(p); ++ } else { ++ p->verb = d->verb | EQAR_VB(eqar); ++ dma_wmb(); ++ qbman_write_eqcr_am_rt_register(s, EQAR_IDX(eqar)); ++ } return 0; } -@@ -522,7 +555,7 @@ void qbman_pull_desc_set_storage(struct +@@ -522,7 +624,7 @@ void qbman_pull_desc_set_storage(struct int stash) { /* save the virtual address */ @@ -1096,24 +1473,43 @@ Signed-off-by: Biwen Li if (!storage) { d->verb &= ~(1 << QB_VDQCR_VERB_RLS_SHIFT); -@@ -615,7 +648,7 @@ int qbman_swp_pull(struct qbman_swp *s, +@@ -615,18 +717,28 @@ int qbman_swp_pull(struct qbman_swp *s, atomic_inc(&s->vdq.available); return -EBUSY; } - s->vdq.storage = (void *)d->rsp_addr_virt; +- p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR); + s->vdq.storage = (void *)(uintptr_t)d->rsp_addr_virt; - p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR); ++ if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) ++ p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR); ++ else ++ p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR_MEM); p->numf = d->numf; p->tok = QMAN_DQ_TOKEN_VALID; -@@ -627,6 +660,7 @@ int qbman_swp_pull(struct qbman_swp *s, - /* Set the verb byte, have to substitute in the valid-bit */ - p->verb = d->verb | s->vdq.valid_bit; - s->vdq.valid_bit ^= QB_VALID_BIT; -+ dccvac(p); + p->dq_src = d->dq_src; + p->rsp_addr = d->rsp_addr; + p->rsp_addr_virt = d->rsp_addr_virt; +- dma_wmb(); +- +- /* Set the verb byte, have to substitute in the valid-bit */ +- p->verb = d->verb | s->vdq.valid_bit; +- s->vdq.valid_bit ^= QB_VALID_BIT; ++ if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) { ++ dma_wmb(); ++ /* Set the verb byte, have to substitute in the valid-bit */ ++ p->verb = d->verb | s->vdq.valid_bit; ++ s->vdq.valid_bit ^= QB_VALID_BIT; ++ dccvac(p); ++ } else { ++ p->verb = d->verb | s->vdq.valid_bit; ++ s->vdq.valid_bit ^= QB_VALID_BIT; ++ dma_wmb(); ++ qbman_write_register(s, QBMAN_CINH_SWP_VDQCR_RT, QMAN_RT_MODE); ++ } return 0; } -@@ -680,8 +714,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne +@@ -680,11 +792,13 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne s->dqrr.next_idx, pi); s->dqrr.reset_bug = 0; } @@ -1122,8 +1518,15 @@ Signed-off-by: Biwen Li + qbman_inval_prefetch(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); } - p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); -@@ -696,8 +729,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne +- p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); ++ if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) ++ p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); ++ else ++ p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR_MEM(s->dqrr.next_idx)); + verb = p->dq.verb; + + /* +@@ -696,8 +810,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne * knew from reading PI. */ if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) { @@ -1133,7 +1536,7 @@ Signed-off-by: Biwen Li return NULL; } /* -@@ -720,7 +752,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne +@@ -720,7 +833,7 @@ const struct dpaa2_dq *qbman_swp_dqrr_ne (flags & DPAA2_DQ_STAT_EXPIRED)) atomic_inc(&s->vdq.available); @@ -1142,15 +1545,44 @@ Signed-off-by: Biwen Li return p; } -@@ -848,6 +880,7 @@ int qbman_swp_release(struct qbman_swp * - */ - dma_wmb(); - p->verb = d->verb | RAR_VB(rar) | num_buffers; -+ dccvac(p); +@@ -836,18 +949,29 @@ int qbman_swp_release(struct qbman_swp * + return -EBUSY; + + /* Start the release command */ +- p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar))); ++ if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) ++ p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar))); ++ else ++ p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR_MEM(RAR_IDX(rar))); + /* Copy the caller's buffer pointers to the command */ + for (i = 0; i < num_buffers; i++) + p->buf[i] = cpu_to_le64(buffers[i]); + p->bpid = d->bpid; + +- /* +- * Set the verb byte, have to substitute in the valid-bit and the number +- * of buffers. +- */ +- dma_wmb(); +- p->verb = d->verb | RAR_VB(rar) | num_buffers; ++ if ((s->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_5000) { ++ /* ++ * Set the verb byte, have to substitute in the valid-bit ++ * and the number of buffers. ++ */ ++ dma_wmb(); ++ p->verb = d->verb | RAR_VB(rar) | num_buffers; ++ dccvac(p); ++ } else { ++ p->verb = d->verb | RAR_VB(rar) | num_buffers; ++ dma_wmb(); ++ qbman_write_register(s, QBMAN_CINH_SWP_RCR_AM_RT + ++ RAR_IDX(rar) * 4, QMAN_RT_MODE); ++ } return 0; } -@@ -855,7 +888,7 @@ int qbman_swp_release(struct qbman_swp * +@@ -855,7 +979,7 @@ int qbman_swp_release(struct qbman_swp * struct qbman_acquire_desc { u8 verb; u8 reserved; @@ -1159,7 +1591,7 @@ Signed-off-by: Biwen Li u8 num; u8 reserved2[59]; }; -@@ -863,10 +896,10 @@ struct qbman_acquire_desc { +@@ -863,10 +987,10 @@ struct qbman_acquire_desc { struct qbman_acquire_rslt { u8 verb; u8 rslt; @@ -1172,7 +1604,7 @@ Signed-off-by: Biwen Li }; /** -@@ -929,7 +962,7 @@ int qbman_swp_acquire(struct qbman_swp * +@@ -929,7 +1053,7 @@ int qbman_swp_acquire(struct qbman_swp * struct qbman_alt_fq_state_desc { u8 verb; u8 reserved[3]; @@ -1181,7 +1613,7 @@ Signed-off-by: Biwen Li u8 reserved2[56]; }; -@@ -952,7 +985,7 @@ int qbman_swp_alt_fq_state(struct qbman_ +@@ -952,7 +1076,7 @@ int qbman_swp_alt_fq_state(struct qbman_ if (!p) return -EBUSY; @@ -1190,7 +1622,7 @@ Signed-off-by: Biwen Li /* Complete the management command */ r = qbman_swp_mc_complete(s, p, alt_fq_verb); -@@ -978,11 +1011,11 @@ int qbman_swp_alt_fq_state(struct qbman_ +@@ -978,11 +1102,11 @@ int qbman_swp_alt_fq_state(struct qbman_ struct qbman_cdan_ctrl_desc { u8 verb; u8 reserved; @@ -1205,7 +1637,7 @@ Signed-off-by: Biwen Li u8 reserved3[48]; }; -@@ -990,7 +1023,7 @@ struct qbman_cdan_ctrl_desc { +@@ -990,7 +1114,7 @@ struct qbman_cdan_ctrl_desc { struct qbman_cdan_ctrl_rslt { u8 verb; u8 rslt; @@ -1214,10 +1646,12 @@ Signed-off-by: Biwen Li u8 reserved[60]; }; -@@ -1033,3 +1066,99 @@ int qbman_swp_CDAN_set(struct qbman_swp +@@ -1031,5 +1155,152 @@ int qbman_swp_CDAN_set(struct qbman_swp + return -EIO; + } - return 0; - } ++ return 0; ++} + +#define QBMAN_RESPONSE_VERB_MASK 0x7f +#define QBMAN_FQ_QUERY_NP 0x45 @@ -1314,13 +1748,65 @@ Signed-off-by: Biwen Li +{ + return le32_to_cpu(a->fill); +} ++ ++struct qbman_orp_cmd_desc { ++ u8 verb; ++ u8 reserved; ++ u8 cid; ++ u8 reserved2; ++ u16 orpid; ++ u16 seqnum; ++ u8 reserved3[56]; ++}; ++ ++struct qbman_orp_cmd_rslt { ++ u8 verb; ++ u8 rslt; ++ u8 cid; ++ u8 reserved1[61]; ++}; ++ ++int qbman_orp_drop(struct qbman_swp *s, u16 orpid, u16 seqnum) ++{ ++ struct qbman_orp_cmd_desc *p; ++ struct qbman_orp_cmd_rslt *r; ++ void *resp; ++ ++ p = (struct qbman_orp_cmd_desc *)qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ ++ p->cid = 0x7; ++ p->orpid = cpu_to_le16(orpid); ++ p->seqnum = cpu_to_le16(seqnum); ++ ++ resp = qbman_swp_mc_complete(s, p, QBMAN_MC_ORP); ++ if (!resp) { ++ pr_err("qbman: Drop sequence num %d orpid 0x%x failed, no response\n", ++ seqnum, orpid); ++ return -EIO; ++ } ++ r = (struct qbman_orp_cmd_rslt *)resp; ++ /* Decode the outcome */ ++ WARN_ON((r->verb & QBMAN_RESPONSE_VERB_MASK) != QBMAN_MC_ORP); ++ ++ /* Determine success or failure */ ++ if (r->rslt != QBMAN_MC_RSLT_OK) { ++ pr_err("Drop seqnum %d of prpid 0x%x failed, code=0x%02x\n", ++ seqnum, orpid, r->rslt); ++ return -EIO; ++ } ++ + return 0; + } --- a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.h +++ b/drivers/staging/fsl-mc/bus/dpio/qbman-portal.h -@@ -1,33 +1,8 @@ +@@ -1,46 +1,28 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ /* * Copyright (C) 2014-2016 Freescale Semiconductor, Inc. - * Copyright 2016 NXP +- * Copyright 2016 NXP ++ * Copyright 2016-2019 NXP * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: @@ -1351,7 +1837,28 @@ Signed-off-by: Biwen Li */ #ifndef __FSL_QBMAN_PORTAL_H #define __FSL_QBMAN_PORTAL_H -@@ -57,8 +32,8 @@ struct qbman_pull_desc { + + #include "../../include/dpaa2-fd.h" + ++#define QMAN_REV_4000 0x04000000 ++#define QMAN_REV_4100 0x04010000 ++#define QMAN_REV_4101 0x04010001 ++#define QMAN_REV_5000 0x05000000 ++ ++#define QMAN_REV_MASK 0xffff0000 ++ + struct dpaa2_dq; + struct qbman_swp; + + /* qbman software portal descriptor structure */ + struct qbman_swp_desc { + void *cena_bar; /* Cache-enabled portal base address */ +- void *cinh_bar; /* Cache-inhibited portal base address */ ++ void __iomem *cinh_bar; /* Cache-inhibited portal base address */ + u32 qman_version; + }; + +@@ -57,8 +39,8 @@ struct qbman_pull_desc { u8 numf; u8 tok; u8 reserved; @@ -1362,7 +1869,7 @@ Signed-off-by: Biwen Li u64 rsp_addr_virt; u8 padding[40]; }; -@@ -95,17 +70,17 @@ enum qbman_pull_type_e { +@@ -95,17 +77,17 @@ enum qbman_pull_type_e { struct qbman_eq_desc { u8 verb; u8 dca; @@ -1387,7 +1894,7 @@ Signed-off-by: Biwen Li u8 fd[32]; }; -@@ -113,9 +88,9 @@ struct qbman_eq_desc { +@@ -113,9 +95,9 @@ struct qbman_eq_desc { struct qbman_release_desc { u8 verb; u8 reserved; @@ -1400,7 +1907,28 @@ Signed-off-by: Biwen Li }; /* Management command result codes */ -@@ -187,6 +162,9 @@ int qbman_result_has_new_result(struct q +@@ -127,7 +109,7 @@ struct qbman_release_desc { + /* portal data structure */ + struct qbman_swp { + const struct qbman_swp_desc *desc; +- void __iomem *addr_cena; ++ void *addr_cena; + void __iomem *addr_cinh; + + /* Management commands */ +@@ -135,6 +117,11 @@ struct qbman_swp { + u32 valid_bit; /* 0x00 or 0x80 */ + } mc; + ++ /* Management response */ ++ struct { ++ u32 valid_bit; /* 0x00 or 0x80 */ ++ } mr; ++ + /* Push dequeues */ + u32 sdq; + +@@ -187,6 +174,9 @@ int qbman_result_has_new_result(struct q void qbman_eq_desc_clear(struct qbman_eq_desc *d); void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success); @@ -1410,7 +1938,25 @@ Signed-off-by: Biwen Li void qbman_eq_desc_set_token(struct qbman_eq_desc *d, u8 token); void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid); void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid, -@@ -466,4 +444,62 @@ static inline void *qbman_swp_mc_complet +@@ -195,6 +185,8 @@ void qbman_eq_desc_set_qd(struct qbman_e + int qbman_swp_enqueue(struct qbman_swp *p, const struct qbman_eq_desc *d, + const struct dpaa2_fd *fd); + ++int qbman_orp_drop(struct qbman_swp *s, u16 orpid, u16 seqnum); ++ + void qbman_release_desc_clear(struct qbman_release_desc *d); + void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid); + void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable); +@@ -453,7 +445,7 @@ static inline int qbman_swp_CDAN_set_con + static inline void *qbman_swp_mc_complete(struct qbman_swp *swp, void *cmd, + u8 cmd_verb) + { +- int loopvar = 1000; ++ int loopvar = 2000; + + qbman_swp_mc_submit(swp, cmd, cmd_verb); + +@@ -466,4 +458,62 @@ static inline void *qbman_swp_mc_complet return cmd; } @@ -2112,7 +2658,21 @@ Signed-off-by: Biwen Li */ #ifndef __FSL_DPAA2_IO_H #define __FSL_DPAA2_IO_H -@@ -88,6 +63,8 @@ void dpaa2_io_down(struct dpaa2_io *d); +@@ -77,17 +52,20 @@ struct dpaa2_io_desc { + int has_8prio; + int cpu; + void *regs_cena; +- void *regs_cinh; ++ void __iomem *regs_cinh; + int dpio_id; + u32 qman_version; + }; + +-struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc); ++struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc, ++ struct device *dev); + + void dpaa2_io_down(struct dpaa2_io *d); irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj); @@ -2121,7 +2681,7 @@ Signed-off-by: Biwen Li /** * struct dpaa2_io_notification_ctx - The DPIO notification context structure * @cb: The callback to be invoked when the notification arrives -@@ -103,7 +80,7 @@ irqreturn_t dpaa2_io_irq(struct dpaa2_io +@@ -103,7 +81,7 @@ irqreturn_t dpaa2_io_irq(struct dpaa2_io * Used when a FQDAN/CDAN registration is made by drivers. */ struct dpaa2_io_notification_ctx { @@ -2130,7 +2690,24 @@ Signed-off-by: Biwen Li int is_cdan; u32 id; int desired_cpu; -@@ -129,9 +106,9 @@ int dpaa2_io_service_enqueue_fq(struct d +@@ -113,10 +91,14 @@ struct dpaa2_io_notification_ctx { + void *dpio_private; + }; + ++int dpaa2_io_get_cpu(struct dpaa2_io *d); ++ + int dpaa2_io_service_register(struct dpaa2_io *service, +- struct dpaa2_io_notification_ctx *ctx); ++ struct dpaa2_io_notification_ctx *ctx, ++ struct device *dev); + void dpaa2_io_service_deregister(struct dpaa2_io *service, +- struct dpaa2_io_notification_ctx *ctx); ++ struct dpaa2_io_notification_ctx *ctx, ++ struct device *dev); + int dpaa2_io_service_rearm(struct dpaa2_io *service, + struct dpaa2_io_notification_ctx *ctx); + +@@ -129,9 +111,9 @@ int dpaa2_io_service_enqueue_fq(struct d const struct dpaa2_fd *fd); int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio, u16 qdbin, const struct dpaa2_fd *fd); @@ -2142,7 +2719,7 @@ Signed-off-by: Biwen Li u64 *buffers, unsigned int num_buffers); struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames, -@@ -139,4 +116,64 @@ struct dpaa2_io_store *dpaa2_io_store_cr +@@ -139,4 +121,64 @@ struct dpaa2_io_store *dpaa2_io_store_cr void dpaa2_io_store_destroy(struct dpaa2_io_store *s); struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last); diff --git a/target/linux/layerscape/patches-4.14/702-dpaa2-ethernet-support-layerscape.patch b/target/linux/layerscape/patches-4.14/702-dpaa2-ethernet-support-layerscape.patch index 44cedd1237..9ccacba3ae 100644 --- a/target/linux/layerscape/patches-4.14/702-dpaa2-ethernet-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/702-dpaa2-ethernet-support-layerscape.patch @@ -1,33 +1,42 @@ -From 6ec4d0cf0b0e5e41abc91012db4ebff7d415a92b Mon Sep 17 00:00:00 2001 +From 90b3f1705785f0e30de6f41abc8764aae1391245 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:13 +0800 -Subject: [PATCH 08/40] dpaa2-ethernet: support layerscape -This is an integrated patch of dpaa2-ethernet for - layerscape +Date: Wed, 17 Apr 2019 18:58:28 +0800 +Subject: [PATCH] dpaa2-ethernet: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +This is an integrated patch of dpaa2-ethernet for layerscape + +Signed-off-by: Biwen Li Signed-off-by: Bogdan Purcareata Signed-off-by: Camelia Groza +Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman Signed-off-by: Guanhua Gao Signed-off-by: Horia Geantă +Signed-off-by: Ioana Ciornei Signed-off-by: Ioana Radulescu Signed-off-by: Nipun Gupta +Signed-off-by: Valentin Catalin Neacsu Signed-off-by: Yangbo Lu -Signed-off-by: Biwen Li --- drivers/staging/fsl-dpaa2/Kconfig | 7 + - drivers/staging/fsl-dpaa2/ethernet/Makefile | 2 + - .../fsl-dpaa2/ethernet/dpaa2-eth-ceetm.c | 1240 +++++++++ + drivers/staging/fsl-dpaa2/ethernet/Makefile | 3 + + .../fsl-dpaa2/ethernet/dpaa2-eth-ceetm.c | 1187 ++++++++ .../fsl-dpaa2/ethernet/dpaa2-eth-ceetm.h | 183 ++ - .../fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c | 357 +++ + .../fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c | 356 +++ .../fsl-dpaa2/ethernet/dpaa2-eth-debugfs.h | 60 + - .../staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 2335 +++++++++++++---- - .../staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 388 ++- - .../fsl-dpaa2/ethernet/dpaa2-ethtool.c | 625 ++++- - drivers/staging/fsl-dpaa2/ethernet/dpni-cmd.h | 192 +- - drivers/staging/fsl-dpaa2/ethernet/dpni.c | 604 ++++- - drivers/staging/fsl-dpaa2/ethernet/dpni.h | 344 ++- - 12 files changed, 5723 insertions(+), 614 deletions(-) + .../fsl-dpaa2/ethernet/dpaa2-eth-trace.h | 29 +- + .../staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 2509 +++++++++++++---- + .../staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 394 ++- + .../fsl-dpaa2/ethernet/dpaa2-ethtool.c | 716 ++++- + drivers/staging/fsl-dpaa2/ethernet/dpkg.h | 380 ++- + drivers/staging/fsl-dpaa2/ethernet/dpni-cmd.h | 255 +- + drivers/staging/fsl-dpaa2/ethernet/dpni.c | 704 ++++- + drivers/staging/fsl-dpaa2/ethernet/dpni.h | 401 ++- + drivers/staging/fsl-dpaa2/ethernet/net.h | 30 +- + 15 files changed, 6315 insertions(+), 899 deletions(-) create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-ceetm.c create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-ceetm.h create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c @@ -51,7 +60,12 @@ Signed-off-by: Biwen Li bool "Enable Rx error queue" --- a/drivers/staging/fsl-dpaa2/ethernet/Makefile +++ b/drivers/staging/fsl-dpaa2/ethernet/Makefile -@@ -5,6 +5,8 @@ +@@ -1,3 +1,4 @@ ++# SPDX-License-Identifier: GPL-2.0 + # + # Makefile for the Freescale DPAA2 Ethernet controller + # +@@ -5,6 +6,8 @@ obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o @@ -62,10 +76,10 @@ Signed-off-by: Biwen Li CFLAGS_dpaa2-eth.o := -I$(src) --- /dev/null +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-ceetm.c -@@ -0,0 +1,1240 @@ +@@ -0,0 +1,1187 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* -+ * Copyright 2017 NXP ++ * Copyright 2017-2019 NXP + * + */ + @@ -197,7 +211,6 @@ Signed-off-by: Biwen Li + enum update_tx_prio type) +{ + struct dpaa2_ceetm_qdisc *sch = qdisc_priv(cl->parent); -+ struct dpni_congestion_notification_cfg notif_cfg = {0}; + struct dpni_tx_schedule_cfg *sched_cfg; + struct dpni_taildrop td = {0}; + u8 ch_id = 0, tc_id = 0; @@ -209,18 +222,6 @@ Signed-off-by: Biwen Li + + switch (type) { + case DPAA2_ETH_ADD_CQ: -+ /* Disable congestion notifications */ -+ notif_cfg.threshold_entry = 0; -+ notif_cfg.threshold_exit = 0; -+ err = dpni_set_congestion_notification(priv->mc_io, 0, -+ priv->mc_token, -+ DPNI_QUEUE_TX, tc_id, -+ ¬if_cfg); -+ if (err) { -+ netdev_err(priv->net_dev, "Error disabling congestion notifications %d\n", -+ err); -+ return err; -+ } + /* Enable taildrop */ + td.enable = 1; + td.units = DPNI_CONGESTION_UNIT_FRAMES; @@ -245,24 +246,6 @@ Signed-off-by: Biwen Li + err); + return err; + } -+ /* Enable congestion notifications */ -+ notif_cfg.units = DPNI_CONGESTION_UNIT_BYTES; -+ notif_cfg.threshold_entry = DPAA2_ETH_TX_CONG_ENTRY_THRESH; -+ notif_cfg.threshold_exit = DPAA2_ETH_TX_CONG_EXIT_THRESH; -+ notif_cfg.message_ctx = (u64)priv; -+ notif_cfg.message_iova = priv->cscn_dma; -+ notif_cfg.notification_mode = DPNI_CONG_OPT_WRITE_MEM_ON_ENTER | -+ DPNI_CONG_OPT_WRITE_MEM_ON_EXIT | -+ DPNI_CONG_OPT_COHERENT_WRITE; -+ err = dpni_set_congestion_notification(priv->mc_io, 0, -+ priv->mc_token, -+ DPNI_QUEUE_TX, tc_id, -+ ¬if_cfg); -+ if (err) { -+ netdev_err(priv->net_dev, "Error enabling congestion notifications %d\n", -+ err); -+ return err; -+ } + break; + } + @@ -564,15 +547,12 @@ Signed-off-by: Biwen Li + struct netdev_queue *dev_queue; + unsigned int i, parent_id; + struct Qdisc *qdisc; -+ int err; + + pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle); + + /* Validate inputs */ + if (sch->parent != TC_H_ROOT) { -+ pr_err("CEETM: a root ceetm qdisc can not be attached to a class\n"); -+ tcf_block_put(priv->block); -+ qdisc_class_hash_destroy(&priv->clhash); ++ pr_err("CEETM: a root ceetm qdisc must be root\n"); + return -EINVAL; + } + @@ -589,10 +569,8 @@ Signed-off-by: Biwen Li + priv->root.qdiscs = kcalloc(dev->num_tx_queues, + sizeof(priv->root.qdiscs[0]), + GFP_KERNEL); -+ if (!priv->root.qdiscs) { -+ err = -ENOMEM; -+ goto err_init_root; -+ } ++ if (!priv->root.qdiscs) ++ return -ENOMEM; + + for (i = 0; i < dev->num_tx_queues; i++) { + dev_queue = netdev_get_tx_queue(dev, i); @@ -601,10 +579,8 @@ Signed-off-by: Biwen Li + + qdisc = qdisc_create_dflt(dev_queue, &pfifo_qdisc_ops, + parent_id); -+ if (!qdisc) { -+ err = -ENOMEM; -+ goto err_init_root; -+ } ++ if (!qdisc) ++ return -ENOMEM; + + priv->root.qdiscs[i] = qdisc; + qdisc->flags |= TCQ_F_ONETXQUEUE; @@ -616,16 +592,11 @@ Signed-off-by: Biwen Li + if (!priv->root.qstats) { + pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n", + __func__); -+ err = -ENOMEM; -+ goto err_init_root; ++ return -ENOMEM; + } + + dpaa2_eth_ceetm_enable(priv_eth); + return 0; -+ -+err_init_root: -+ dpaa2_ceetm_destroy(sch); -+ return err; +} + +/* Configure a prio ceetm qdisc */ @@ -636,21 +607,18 @@ Signed-off-by: Biwen Li + struct net_device *dev = qdisc_dev(sch); + struct dpaa2_ceetm_class *parent_cl; + struct Qdisc *parent_qdisc; -+ int err; + + pr_debug(KBUILD_BASENAME " : %s : qdisc %X\n", __func__, sch->handle); + + if (sch->parent == TC_H_ROOT) { + pr_err("CEETM: a prio ceetm qdisc can not be root\n"); -+ err = -EINVAL; -+ goto err_init_prio; ++ return -EINVAL; + } + + parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent)); + if (strcmp(parent_qdisc->ops->id, dpaa2_ceetm_qdisc_ops.id)) { + pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n"); -+ err = -EINVAL; -+ goto err_init_prio; ++ return -EINVAL; + } + + /* Obtain the parent root ceetm_class */ @@ -658,20 +626,13 @@ Signed-off-by: Biwen Li + + if (!parent_cl || parent_cl->type != CEETM_ROOT) { + pr_err("CEETM: a prio ceetm qdiscs can be added only under a root ceetm class\n"); -+ err = -EINVAL; -+ goto err_init_prio; ++ return -EINVAL; + } + + priv->prio.parent = parent_cl; + parent_cl->child = sch; + -+ err = dpaa2_ceetm_change_prio(sch, priv, qopt); -+ -+ return 0; -+ -+err_init_prio: -+ dpaa2_ceetm_destroy(sch); -+ return err; ++ return dpaa2_ceetm_change_prio(sch, priv, qopt); +} + +/* Configure a generic ceetm qdisc */ @@ -741,7 +702,7 @@ Signed-off-by: Biwen Li + break; + default: + pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__); -+ dpaa2_ceetm_destroy(sch); ++ /* Note: dpaa2_ceetm_destroy() will be called by our caller */ + err = -EINVAL; + } + @@ -1491,7 +1452,7 @@ Signed-off-by: Biwen Li +#endif --- /dev/null +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c -@@ -0,0 +1,357 @@ +@@ -0,0 +1,356 @@ + +/* Copyright 2015 Freescale Semiconductor Inc. + * @@ -1605,9 +1566,9 @@ Signed-off-by: Biwen Li + int i, err; + + seq_printf(file, "non-zero FQ stats for %s:\n", priv->net_dev->name); -+ seq_printf(file, "%s%16s%16s%16s%16s%16s%16s\n", ++ seq_printf(file, "%s%16s%16s%16s%16s%16s\n", + "VFQID", "CPU", "Traffic Class", "Type", "Frames", -+ "Pending frames", "Congestion"); ++ "Pending frames"); + + for (i = 0; i < priv->num_fqs; i++) { + fq = &priv->fq[i]; @@ -1619,14 +1580,13 @@ Signed-off-by: Biwen Li + if (!fq->stats.frames && !fcnt) + continue; + -+ seq_printf(file, "%5d%16d%16d%16s%16llu%16u%16llu\n", ++ seq_printf(file, "%5d%16d%16d%16s%16llu%16u\n", + fq->fqid, + fq->target_cpu, + fq->tc, + fq_type_to_str(fq), + fq->stats.frames, -+ fcnt, -+ fq->stats.congestion_entry); ++ fcnt); + } + + return 0; @@ -1912,9 +1872,80 @@ Signed-off-by: Biwen Li +#endif /* CONFIG_FSL_DPAA2_ETH_DEBUGFS */ + +#endif /* DPAA2_ETH_DEBUGFS_H */ +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-trace.h ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-trace.h +@@ -1,32 +1,5 @@ ++/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ + /* Copyright 2014-2015 Freescale Semiconductor Inc. +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of Freescale Semiconductor nor the +- * names of its contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY +- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY +- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + #undef TRACE_SYSTEM --- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c -@@ -38,9 +38,14 @@ +@@ -1,33 +1,6 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* Copyright 2014-2016 Freescale Semiconductor Inc. + * Copyright 2016-2017 NXP +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of Freescale Semiconductor nor the +- * names of its contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY +- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY +- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + #include + #include +@@ -38,9 +11,14 @@ #include #include #include @@ -1930,7 +1961,16 @@ Signed-off-by: Biwen Li /* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files * using trace events only need to #include -@@ -104,13 +109,15 @@ static void free_rx_fd(struct dpaa2_eth_ +@@ -52,8 +30,6 @@ MODULE_LICENSE("Dual BSD/GPL"); + MODULE_AUTHOR("Freescale Semiconductor, Inc"); + MODULE_DESCRIPTION("Freescale DPAA2 Ethernet Driver"); + +-const char dpaa2_eth_drv_version[] = "0.1"; +- + static void *dpaa2_iova_to_virt(struct iommu_domain *domain, + dma_addr_t iova_addr) + { +@@ -104,26 +80,27 @@ static void free_rx_fd(struct dpaa2_eth_ /* We don't support any other format */ return; @@ -1943,28 +1983,47 @@ Signed-off-by: Biwen Li + for (i = 1; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) { addr = dpaa2_sg_get_addr(&sgt[i]); sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr); - dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, +- dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, - DMA_FROM_DEVICE); -+ DMA_BIDIRECTIONAL); ++ dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE, ++ DMA_BIDIRECTIONAL); - skb_free_frag(sg_vaddr); +- skb_free_frag(sg_vaddr); ++ free_pages((unsigned long)sg_vaddr, 0); if (dpaa2_sg_is_final(&sgt[i])) -@@ -133,8 +140,7 @@ static struct sk_buff *build_linear_skb( + break; + } + + free_buf: +- skb_free_frag(vaddr); ++ free_pages((unsigned long)vaddr, 0); + } + + /* Build a linear skb based on a single-buffer frame descriptor */ +-static struct sk_buff *build_linear_skb(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_channel *ch, ++static struct sk_buff *build_linear_skb(struct dpaa2_eth_channel *ch, + const struct dpaa2_fd *fd, + void *fd_vaddr) + { +@@ -133,8 +110,7 @@ static struct sk_buff *build_linear_skb( ch->buf_count--; - skb = build_skb(fd_vaddr, DPAA2_ETH_RX_BUF_SIZE + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); -+ skb = build_skb(fd_vaddr, DPAA2_ETH_SKB_SIZE); ++ skb = build_skb(fd_vaddr, DPAA2_ETH_RX_BUF_RAW_SIZE); if (unlikely(!skb)) return NULL; -@@ -170,15 +176,19 @@ static struct sk_buff *build_frag_skb(st +@@ -169,16 +145,20 @@ static struct sk_buff *build_frag_skb(st + /* Get the address and length from the S/G entry */ sg_addr = dpaa2_sg_get_addr(sge); sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr); - dma_unmap_single(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE, +- dma_unmap_single(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE, - DMA_FROM_DEVICE); -+ DMA_BIDIRECTIONAL); ++ dma_unmap_page(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE, ++ DMA_BIDIRECTIONAL); sg_length = dpaa2_sg_get_len(sge); @@ -1972,17 +2031,17 @@ Signed-off-by: Biwen Li /* We build the skb around the first data buffer */ - skb = build_skb(sg_vaddr, DPAA2_ETH_RX_BUF_SIZE + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); -+ skb = build_skb(sg_vaddr, DPAA2_ETH_SKB_SIZE); ++ skb = build_skb(sg_vaddr, DPAA2_ETH_RX_BUF_RAW_SIZE); if (unlikely(!skb)) { + /* Free the first SG entry now, since we already + * unmapped it and obtained the virtual address + */ -+ skb_free_frag(sg_vaddr); ++ free_pages((unsigned long)sg_vaddr, 0); + /* We still need to subtract the buffers used * by this FD from our software counter */ -@@ -213,17 +223,173 @@ static struct sk_buff *build_frag_skb(st +@@ -213,17 +193,172 @@ static struct sk_buff *build_frag_skb(st break; } @@ -2021,9 +2080,7 @@ Signed-off-by: Biwen Li + + fq = &priv->fq[queue_id]; + for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) { -+ err = dpaa2_io_service_enqueue_qd(fq->channel->dpio, -+ priv->tx_qdid, 0, -+ fq->tx_qdbin, fd); ++ err = priv->enqueue(priv, fq, fd, 0); + if (err != -EBUSY) + break; + } @@ -2039,6 +2096,9 @@ Signed-off-by: Biwen Li + return err; +} + ++/* Free buffers acquired from the buffer pool or which were meant to ++ * be released in the pool ++ */ +static void free_bufs(struct dpaa2_eth_priv *priv, u64 *buf_array, int count) +{ + struct device *dev = priv->net_dev->dev.parent; @@ -2046,11 +2106,10 @@ Signed-off-by: Biwen Li + int i; + + for (i = 0; i < count; i++) { -+ /* Same logic as on regular Rx path */ + vaddr = dpaa2_iova_to_virt(priv->iommu_domain, buf_array[i]); -+ dma_unmap_single(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE, -+ DMA_BIDIRECTIONAL); -+ skb_free_frag(vaddr); ++ dma_unmap_page(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE, ++ DMA_BIDIRECTIONAL); ++ free_pages((unsigned long)vaddr, 0); + } +} + @@ -2152,12 +2211,11 @@ Signed-off-by: Biwen Li struct dpaa2_eth_channel *ch, const struct dpaa2_fd *fd, - struct napi_struct *napi) -+ struct napi_struct *napi, -+ u16 queue_id) ++ struct dpaa2_eth_fq *fq) { dma_addr_t addr = dpaa2_fd_get_addr(fd); u8 fd_format = dpaa2_fd_get_format(fd); -@@ -235,14 +401,16 @@ static void dpaa2_eth_rx(struct dpaa2_et +@@ -235,14 +370,16 @@ static void dpaa2_eth_rx(struct dpaa2_et struct dpaa2_fas *fas; void *buf_data; u32 status = 0; @@ -2176,23 +2234,25 @@ Signed-off-by: Biwen Li prefetch(fas); buf_data = vaddr + dpaa2_fd_get_offset(fd); prefetch(buf_data); -@@ -251,22 +419,41 @@ static void dpaa2_eth_rx(struct dpaa2_et +@@ -251,22 +388,43 @@ static void dpaa2_eth_rx(struct dpaa2_et percpu_extras = this_cpu_ptr(priv->percpu_extras); if (fd_format == dpaa2_fd_single) { +- skb = build_linear_skb(priv, ch, fd, vaddr); + xdp_act = dpaa2_eth_run_xdp(priv, ch, (struct dpaa2_fd *)fd, -+ queue_id, vaddr); ++ fq->flowid, vaddr); + if (xdp_act != XDP_PASS) + return; + -+ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, -+ DMA_BIDIRECTIONAL); - skb = build_linear_skb(priv, ch, fd, vaddr); ++ dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE, ++ DMA_BIDIRECTIONAL); ++ skb = build_linear_skb(ch, fd, vaddr); } else if (fd_format == dpaa2_fd_sg) { -+ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, ++ dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE, + DMA_BIDIRECTIONAL); skb = build_frag_skb(priv, ch, buf_data); - skb_free_frag(vaddr); +- skb_free_frag(vaddr); ++ free_pages((unsigned long)vaddr, 0); percpu_extras->rx_sg_frames++; percpu_extras->rx_sg_bytes += dpaa2_fd_get_len(fd); } else { @@ -2210,30 +2270,29 @@ Signed-off-by: Biwen Li + /* Get the timestamp value */ + if (priv->ts_rx_en) { + struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb); -+ u64 *ns = dpaa2_get_ts(vaddr, false); ++ __le64 *ts = dpaa2_get_ts(vaddr, false); ++ u64 ns; + -+ *ns = DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS * le64_to_cpup(ns); + memset(shhwtstamps, 0, sizeof(*shhwtstamps)); -+ shhwtstamps->hwtstamp = ns_to_ktime(*ns); ++ ++ ns = DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS * le64_to_cpup(ts); ++ shhwtstamps->hwtstamp = ns_to_ktime(ns); + } + /* Check if we need to validate the L4 csum */ if (likely(dpaa2_fd_get_frc(fd) & DPAA2_FD_FRC_FASV)) { status = le32_to_cpu(fas->status); -@@ -275,6 +462,12 @@ static void dpaa2_eth_rx(struct dpaa2_et +@@ -274,30 +432,80 @@ static void dpaa2_eth_rx(struct dpaa2_et + } skb->protocol = eth_type_trans(skb, priv->net_dev); ++ skb_record_rx_queue(skb, fq->flowid); -+ /* Record Rx queue - this will be used when picking a Tx queue to -+ * forward the frames. We're keeping flow affinity through the -+ * network stack. -+ */ -+ skb_record_rx_queue(skb, queue_id); -+ percpu_stats->rx_packets++; percpu_stats->rx_bytes += dpaa2_fd_get_len(fd); -@@ -282,22 +475,74 @@ static void dpaa2_eth_rx(struct dpaa2_et +- napi_gro_receive(napi, skb); ++ napi_gro_receive(&ch->napi, skb); return; @@ -2297,14 +2356,11 @@ Signed-off-by: Biwen Li * make sure we don't accidentally issue another volatile dequeue which would * overwrite (leak) frames already in the store. * -+ * The number of frames is returned using the last 2 output arguments, -+ * separately for Rx and Tx confirmations. -+ * * Observance of NAPI budget is not our concern, leaving that to the caller. */ -static int consume_frames(struct dpaa2_eth_channel *ch) -+static bool consume_frames(struct dpaa2_eth_channel *ch, int *rx_cleaned, -+ int *tx_conf_cleaned) ++static int consume_frames(struct dpaa2_eth_channel *ch, ++ struct dpaa2_eth_fq **src) { struct dpaa2_eth_priv *priv = ch->priv; - struct dpaa2_eth_fq *fq; @@ -2312,48 +2368,35 @@ Signed-off-by: Biwen Li struct dpaa2_dq *dq; const struct dpaa2_fd *fd; int cleaned = 0; -@@ -315,14 +560,60 @@ static int consume_frames(struct dpaa2_e +@@ -315,16 +523,51 @@ static int consume_frames(struct dpaa2_e } fd = dpaa2_dq_fd(dq); -- fq = (struct dpaa2_eth_fq *)(uintptr_t)dpaa2_dq_fqd_ctx(dq); -- fq->stats.frames++; + prefetch(fd); ++ + fq = (struct dpaa2_eth_fq *)(uintptr_t)dpaa2_dq_fqd_ctx(dq); +- fq->stats.frames++; - fq->consume(priv, ch, fd, &ch->napi); -+ fq = (struct dpaa2_eth_fq *)(uintptr_t)dpaa2_dq_fqd_ctx(dq); -+ fq->consume(priv, ch, fd, &ch->napi, fq->flowid); ++ fq->consume(priv, ch, fd, fq); cleaned++; } while (!is_last); -- return cleaned; + if (!cleaned) -+ return false; -+ -+ /* All frames brought in store by a volatile dequeue -+ * come from the same queue -+ */ -+ if (fq->type == DPAA2_TX_CONF_FQ) { -+ *tx_conf_cleaned += cleaned; -+ } else { -+ *rx_cleaned += cleaned; -+ /* If we processed XDP_REDIRECT frames, flush them now */ -+ /* FIXME: Since we don't actually do anything inside -+ * ndo_xdp_flush, we call it here simply for compliance -+ * reasons -+ */ -+ if (ch->flush) { -+ xdp_do_flush_map(); -+ ch->flush = false; -+ } -+ } ++ return 0; + + fq->stats.frames += cleaned; + ch->stats.frames += cleaned; + -+ return true; -+} ++ /* A dequeue operation only pulls frames from a single queue ++ * into the store. Return the frame queue as an out param. ++ */ ++ if (src) ++ *src = fq; + + return cleaned; + } + +/* Configure the egress frame annotation for timestamp update */ +static void enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start) +{ @@ -2374,10 +2417,12 @@ Signed-off-by: Biwen Li + ctrl = DPAA2_FAEAD_A2V | DPAA2_FAEAD_UPDV | DPAA2_FAEAD_UPD; + faead = dpaa2_get_faead(buf_start, true); + faead->ctrl = cpu_to_le32(ctrl); - } - ++} ++ /* Create a frame descriptor based on a fragmented skb */ -@@ -341,7 +632,6 @@ static int build_sg_fd(struct dpaa2_eth_ + static int build_sg_fd(struct dpaa2_eth_priv *priv, + struct sk_buff *skb, +@@ -341,7 +584,6 @@ static int build_sg_fd(struct dpaa2_eth_ int num_sg; int num_dma_bufs; struct dpaa2_eth_swa *swa; @@ -2385,7 +2430,7 @@ Signed-off-by: Biwen Li /* Create and map scatterlist. * We don't advertise NETIF_F_FRAGLIST, so skb_to_sgvec() will not have -@@ -365,21 +655,14 @@ static int build_sg_fd(struct dpaa2_eth_ +@@ -365,21 +607,14 @@ static int build_sg_fd(struct dpaa2_eth_ /* Prepare the HW SGT structure */ sgt_buf_size = priv->tx_data_offset + @@ -2410,7 +2455,7 @@ Signed-off-by: Biwen Li sgt = (struct dpaa2_sg_entry *)(sgt_buf + priv->tx_data_offset); -@@ -402,10 +685,11 @@ static int build_sg_fd(struct dpaa2_eth_ +@@ -402,10 +637,11 @@ static int build_sg_fd(struct dpaa2_eth_ * all of them on Tx Conf. */ swa = (struct dpaa2_eth_swa *)sgt_buf; @@ -2426,7 +2471,7 @@ Signed-off-by: Biwen Li /* Separately map the SGT buffer */ addr = dma_map_single(dev, sgt_buf, sgt_buf_size, DMA_BIDIRECTIONAL); -@@ -417,13 +701,15 @@ static int build_sg_fd(struct dpaa2_eth_ +@@ -417,13 +653,15 @@ static int build_sg_fd(struct dpaa2_eth_ dpaa2_fd_set_format(fd, dpaa2_fd_sg); dpaa2_fd_set_addr(fd, addr); dpaa2_fd_set_len(fd, skb->len); @@ -2445,7 +2490,7 @@ Signed-off-by: Biwen Li sgt_buf_alloc_failed: dma_unmap_sg(dev, scl, num_sg, DMA_BIDIRECTIONAL); dma_map_sg_failed: -@@ -437,29 +723,27 @@ static int build_single_fd(struct dpaa2_ +@@ -437,29 +675,27 @@ static int build_single_fd(struct dpaa2_ struct dpaa2_fd *fd) { struct device *dev = priv->net_dev->dev.parent; @@ -2488,7 +2533,7 @@ Signed-off-by: Biwen Li addr = dma_map_single(dev, buffer_start, skb_tail_pointer(skb) - buffer_start, -@@ -471,8 +755,10 @@ static int build_single_fd(struct dpaa2_ +@@ -471,8 +707,10 @@ static int build_single_fd(struct dpaa2_ dpaa2_fd_set_offset(fd, (u16)(skb->data - buffer_start)); dpaa2_fd_set_len(fd, skb->len); dpaa2_fd_set_format(fd, dpaa2_fd_single); @@ -2501,15 +2546,17 @@ Signed-off-by: Biwen Li return 0; } -@@ -486,92 +772,128 @@ static int build_single_fd(struct dpaa2_ - * Optionally, return the frame annotation status word (FAS), which needs - * to be checked if we're on the confirmation path. +@@ -483,72 +721,75 @@ static int build_single_fd(struct dpaa2_ + * back-pointed to is also freed. + * This can be called either from dpaa2_eth_tx_conf() or on the error path of + * dpaa2_eth_tx(). +- * Optionally, return the frame annotation status word (FAS), which needs +- * to be checked if we're on the confirmation path. */ --static void free_tx_fd(const struct dpaa2_eth_priv *priv, -+static void free_tx_fd(struct dpaa2_eth_priv *priv, - const struct dpaa2_fd *fd, + static void free_tx_fd(const struct dpaa2_eth_priv *priv, +- const struct dpaa2_fd *fd, - u32 *status) -+ bool in_napi) ++ const struct dpaa2_fd *fd, bool in_napi) { struct device *dev = priv->net_dev->dev.parent; dma_addr_t fd_addr; @@ -2594,13 +2641,13 @@ Signed-off-by: Biwen Li + /* Get the timestamp value */ + if (priv->ts_tx_en && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { + struct skb_shared_hwtstamps shhwtstamps; -+ u64 *ns; ++ __le64 *ts = dpaa2_get_ts(buffer_start, true); ++ u64 ns; + + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + -+ ns = dpaa2_get_ts(buffer_start, true); -+ *ns = DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS * le64_to_cpup(ns); -+ shhwtstamps.hwtstamp = ns_to_ktime(*ns); ++ ns = DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS * le64_to_cpup(ts); ++ shhwtstamps.hwtstamp = ns_to_ktime(ns); + skb_tstamp_tx(skb, &shhwtstamps); + } @@ -2616,46 +2663,33 @@ Signed-off-by: Biwen Li } static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev) - { - struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -+ struct device *dev = net_dev->dev.parent; - struct dpaa2_fd fd; +@@ -558,20 +799,41 @@ static netdev_tx_t dpaa2_eth_tx(struct s struct rtnl_link_stats64 *percpu_stats; struct dpaa2_eth_drv_stats *percpu_extras; struct dpaa2_eth_fq *fq; ++ struct netdev_queue *nq; u16 queue_mapping; - int err, i; + unsigned int needed_headroom; ++ u32 fd_len; + u8 prio; + int err, i, ch_id = 0; + + queue_mapping = skb_get_queue_mapping(skb); + prio = netdev_txq_to_tc(net_dev, queue_mapping); -+ + /* Hardware interprets priority level 0 as being the highest, + * so we need to do a reverse mapping to the netdev tc index + */ + if (net_dev->num_tc) + prio = net_dev->num_tc - prio - 1; -+ ++ + queue_mapping %= dpaa2_eth_queue_count(priv); + fq = &priv->fq[queue_mapping]; -+ -+ /* If we're congested, stop this tx queue; transmission of -+ * the current skb happens regardless of congestion state -+ */ -+ dma_sync_single_for_cpu(dev, priv->cscn_dma, -+ DPAA2_CSCN_SIZE, DMA_FROM_DEVICE); -+ if (unlikely(dpaa2_cscn_state_congested(priv->cscn_mem))) { -+ netif_stop_subqueue(net_dev, queue_mapping); -+ fq->stats.congestion_entry++; -+ } percpu_stats = this_cpu_ptr(priv->percpu_stats); percpu_extras = this_cpu_ptr(priv->percpu_extras); - if (unlikely(skb_headroom(skb) < DPAA2_ETH_NEEDED_HEADROOM(priv))) { -+ /* For non-linear skb we don't need a minimum headroom */ + needed_headroom = dpaa2_eth_needed_headroom(priv, skb); + if (skb_headroom(skb) < needed_headroom) { struct sk_buff *ns; @@ -2667,43 +2701,56 @@ Signed-off-by: Biwen Li goto err_alloc_headroom; } + percpu_extras->tx_reallocs++; ++ + if (skb->sk) + skb_set_owner_w(ns, skb->sk); ++ dev_kfree_skb(skb); skb = ns; } -@@ -605,13 +927,15 @@ static netdev_tx_t dpaa2_eth_tx(struct s - /* Tracing point */ - trace_dpaa2_tx_fd(net_dev, &fd); +@@ -602,17 +864,24 @@ static netdev_tx_t dpaa2_eth_tx(struct s + goto err_build_fd; + } -- /* TxConf FQ selection primarily based on cpu affinity; this is -- * non-migratable context, so it's safe to call smp_processor_id(). -- */ -- queue_mapping = smp_processor_id() % dpaa2_eth_queue_count(priv); -- fq = &priv->fq[queue_mapping]; + if (dpaa2_eth_ceetm_is_enabled(priv)) { + err = dpaa2_ceetm_classify(skb, net_dev->qdisc, &ch_id, &prio); + if (err) + goto err_ceetm_classify; + } + + /* Tracing point */ + trace_dpaa2_tx_fd(net_dev, &fd); + +- /* TxConf FQ selection primarily based on cpu affinity; this is +- * non-migratable context, so it's safe to call smp_processor_id(). ++ fd_len = dpaa2_fd_get_len(&fd); ++ nq = netdev_get_tx_queue(net_dev, queue_mapping); ++ netdev_tx_sent_queue(nq, fd_len); ++ ++ /* Everything that happens after this enqueues might race with ++ * the Tx confirmation callback for this frame + */ +- queue_mapping = smp_processor_id() % dpaa2_eth_queue_count(priv); +- fq = &priv->fq[queue_mapping]; for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) { - err = dpaa2_io_service_enqueue_qd(NULL, priv->tx_qdid, 0, -+ err = dpaa2_io_service_enqueue_qd(fq->channel->dpio, -+ priv->tx_qdid, prio, - fq->tx_qdbin, &fd); +- fq->tx_qdbin, &fd); ++ err = priv->enqueue(priv, fq, &fd, 0); if (err != -EBUSY) break; -@@ -620,7 +944,7 @@ static netdev_tx_t dpaa2_eth_tx(struct s + } +@@ -620,14 +889,17 @@ static netdev_tx_t dpaa2_eth_tx(struct s if (unlikely(err < 0)) { percpu_stats->tx_errors++; /* Clean up everything, including freeing the skb */ - free_tx_fd(priv, &fd, NULL); + free_tx_fd(priv, &fd, false); ++ netdev_tx_completed_queue(nq, 1, fd_len); } else { percpu_stats->tx_packets++; - percpu_stats->tx_bytes += dpaa2_fd_get_len(&fd); -@@ -628,6 +952,8 @@ static netdev_tx_t dpaa2_eth_tx(struct s +- percpu_stats->tx_bytes += dpaa2_fd_get_len(&fd); ++ percpu_stats->tx_bytes += fd_len; + } return NETDEV_TX_OK; @@ -2712,29 +2759,36 @@ Signed-off-by: Biwen Li err_build_fd: err_alloc_headroom: dev_kfree_skb(skb); -@@ -639,13 +965,13 @@ err_alloc_headroom: +@@ -637,48 +909,39 @@ err_alloc_headroom: + + /* Tx confirmation frame processing routine */ static void dpaa2_eth_tx_conf(struct dpaa2_eth_priv *priv, - struct dpaa2_eth_channel *ch, +- struct dpaa2_eth_channel *ch, ++ struct dpaa2_eth_channel *ch __always_unused, const struct dpaa2_fd *fd, - struct napi_struct *napi __always_unused) -+ struct napi_struct *napi __always_unused, -+ u16 queue_id) ++ struct dpaa2_eth_fq *fq) { -+ struct device *dev = priv->net_dev->dev.parent; struct rtnl_link_stats64 *percpu_stats; struct dpaa2_eth_drv_stats *percpu_extras; - u32 status = 0; ++ u32 fd_len = dpaa2_fd_get_len(fd); u32 fd_errors; - bool has_fas_errors = false; /* Tracing point */ trace_dpaa2_tx_conf_fd(priv->net_dev, fd); -@@ -654,31 +980,28 @@ static void dpaa2_eth_tx_conf(struct dpa + + percpu_extras = this_cpu_ptr(priv->percpu_extras); percpu_extras->tx_conf_frames++; - percpu_extras->tx_conf_bytes += dpaa2_fd_get_len(fd); +- percpu_extras->tx_conf_bytes += dpaa2_fd_get_len(fd); ++ percpu_extras->tx_conf_bytes += fd_len; ++ ++ fq->dq_frames++; ++ fq->dq_bytes += fd_len; -- /* Check frame errors in the FD field */ -- fd_errors = dpaa2_fd_get_ctrl(fd) & DPAA2_FD_TX_ERR_MASK; + /* Check frame errors in the FD field */ + fd_errors = dpaa2_fd_get_ctrl(fd) & DPAA2_FD_TX_ERR_MASK; - if (unlikely(fd_errors)) { - /* We only check error bits in the FAS field if corresponding - * FAERR bit is set in FD and the FAS field is marked as valid @@ -2744,17 +2798,9 @@ Signed-off-by: Biwen Li - if (net_ratelimit()) - netdev_dbg(priv->net_dev, "TX frame FD error: 0x%08x\n", - fd_errors); -+ /* Check congestion state and wake all queues if necessary */ -+ if (unlikely(__netif_subqueue_stopped(priv->net_dev, queue_id))) { -+ dma_sync_single_for_cpu(dev, priv->cscn_dma, -+ DPAA2_CSCN_SIZE, DMA_FROM_DEVICE); -+ if (!dpaa2_cscn_state_congested(priv->cscn_mem)) -+ netif_tx_wake_all_queues(priv->net_dev); - } - +- } +- - free_tx_fd(priv, fd, has_fas_errors ? &status : NULL); -+ /* Check frame errors in the FD field */ -+ fd_errors = dpaa2_fd_get_ctrl(fd) & DPAA2_FD_TX_ERR_MASK; + free_tx_fd(priv, fd, true); if (likely(!fd_errors)) @@ -2774,7 +2820,7 @@ Signed-off-by: Biwen Li } static int set_rx_csum(struct dpaa2_eth_priv *priv, bool enable) -@@ -728,26 +1051,27 @@ static int set_tx_csum(struct dpaa2_eth_ +@@ -728,26 +991,29 @@ static int set_tx_csum(struct dpaa2_eth_ /* Perform a single release command to add buffers * to the specified buffer pool */ @@ -2784,7 +2830,8 @@ Signed-off-by: Biwen Li { struct device *dev = priv->net_dev->dev.parent; u64 buf_array[DPAA2_ETH_BUFS_PER_CMD]; - void *buf; +- void *buf; ++ struct page *page; dma_addr_t addr; - int i; + int i, err; @@ -2794,25 +2841,30 @@ Signed-off-by: Biwen Li * alignment padding */ - buf = napi_alloc_frag(DPAA2_ETH_BUF_RAW_SIZE); -+ buf = napi_alloc_frag(dpaa2_eth_buf_raw_size(priv)); - if (unlikely(!buf)) +- if (unlikely(!buf)) ++ /* allocate one page for each Rx buffer. WRIOP sees ++ * the entire page except for a tailroom reserved for ++ * skb shared info ++ */ ++ page = dev_alloc_pages(0); ++ if (!page) goto err_alloc; - buf = PTR_ALIGN(buf, DPAA2_ETH_RX_BUF_ALIGN); -+ buf = PTR_ALIGN(buf, priv->rx_buf_align); - - addr = dma_map_single(dev, buf, DPAA2_ETH_RX_BUF_SIZE, +- +- addr = dma_map_single(dev, buf, DPAA2_ETH_RX_BUF_SIZE, - DMA_FROM_DEVICE); -+ DMA_BIDIRECTIONAL); ++ addr = dma_map_page(dev, page, 0, DPAA2_ETH_RX_BUF_SIZE, ++ DMA_BIDIRECTIONAL); if (unlikely(dma_mapping_error(dev, addr))) goto err_map; -@@ -755,28 +1079,31 @@ static int add_bufs(struct dpaa2_eth_pri +@@ -755,28 +1021,33 @@ static int add_bufs(struct dpaa2_eth_pri /* tracing point */ trace_dpaa2_eth_buf_seed(priv->net_dev, - buf, DPAA2_ETH_BUF_RAW_SIZE, -+ buf, dpaa2_eth_buf_raw_size(priv), ++ page, DPAA2_ETH_RX_BUF_RAW_SIZE, addr, DPAA2_ETH_RX_BUF_SIZE, bpid); } @@ -2833,8 +2885,8 @@ Signed-off-by: Biwen Li + buf_array, i)) == -EBUSY) cpu_relax(); + -+ /* If release command failed, clean up and bail out; not much -+ * else we can do about it ++ /* If release command failed, clean up and bail out; ++ * not much else we can do about it + */ + if (err) { + free_bufs(priv, buf_array, i); @@ -2844,13 +2896,16 @@ Signed-off-by: Biwen Li return i; err_map: - skb_free_frag(buf); +- skb_free_frag(buf); ++ __free_pages(page, 0); err_alloc: -+ /* If we managed to allocate at least some buffers, release them */ ++ /* If we managed to allocate at least some buffers, ++ * release them to hardware ++ */ if (i) goto release_bufs; -@@ -796,9 +1123,10 @@ static int seed_pool(struct dpaa2_eth_pr +@@ -796,9 +1067,10 @@ static int seed_pool(struct dpaa2_eth_pr */ preempt_disable(); for (j = 0; j < priv->num_channels; j++) { @@ -2863,7 +2918,7 @@ Signed-off-by: Biwen Li priv->channel[j]->buf_count += new_count; if (new_count < DPAA2_ETH_BUFS_PER_CMD) { -@@ -818,10 +1146,8 @@ static int seed_pool(struct dpaa2_eth_pr +@@ -818,10 +1090,8 @@ static int seed_pool(struct dpaa2_eth_pr */ static void drain_bufs(struct dpaa2_eth_priv *priv, int count) { @@ -2875,7 +2930,7 @@ Signed-off-by: Biwen Li do { ret = dpaa2_io_service_acquire(NULL, priv->bpid, -@@ -830,27 +1156,16 @@ static void drain_bufs(struct dpaa2_eth_ +@@ -830,27 +1100,16 @@ static void drain_bufs(struct dpaa2_eth_ netdev_err(priv->net_dev, "dpaa2_io_service_acquire() failed\n"); return; } @@ -2906,7 +2961,7 @@ Signed-off-by: Biwen Li } /* Function is called from softirq context only, so we don't need to guard -@@ -862,19 +1177,19 @@ static int refill_pool(struct dpaa2_eth_ +@@ -862,19 +1121,19 @@ static int refill_pool(struct dpaa2_eth_ { int new_count; @@ -2930,7 +2985,7 @@ Signed-off-by: Biwen Li return -ENOMEM; return 0; -@@ -887,7 +1202,8 @@ static int pull_channel(struct dpaa2_eth +@@ -887,7 +1146,8 @@ static int pull_channel(struct dpaa2_eth /* Retry while portal is busy */ do { @@ -2940,22 +2995,16 @@ Signed-off-by: Biwen Li dequeues++; cpu_relax(); } while (err == -EBUSY); -@@ -902,20 +1218,21 @@ static int pull_channel(struct dpaa2_eth - /* NAPI poll routine - * - * Frames are dequeued from the QMan channel associated with this NAPI context. -- * Rx, Tx confirmation and (if configured) Rx error frames all count -- * towards the NAPI budget. -+ * Rx and (if configured) Rx error frames count towards the NAPI budget. Tx -+ * confirmation frames are limited by a threshold per NAPI poll cycle. - */ +@@ -908,14 +1168,17 @@ static int pull_channel(struct dpaa2_eth static int dpaa2_eth_poll(struct napi_struct *napi, int budget) { struct dpaa2_eth_channel *ch; - int cleaned = 0, store_cleaned; -+ int rx_cleaned = 0, tx_conf_cleaned = 0; -+ bool store_cleaned; struct dpaa2_eth_priv *priv; ++ int rx_cleaned = 0, txconf_cleaned = 0; ++ struct dpaa2_eth_fq *fq, *txc_fq = NULL; ++ struct netdev_queue *nq; ++ int store_cleaned, work_done; int err; ch = container_of(napi, struct dpaa2_eth_channel, napi); @@ -2966,25 +3015,45 @@ Signed-off-by: Biwen Li err = pull_channel(ch); if (unlikely(err)) break; -@@ -923,29 +1240,29 @@ static int dpaa2_eth_poll(struct napi_st +@@ -923,29 +1186,56 @@ static int dpaa2_eth_poll(struct napi_st /* Refill pool if appropriate */ refill_pool(priv, ch, priv->bpid); - store_cleaned = consume_frames(ch); - cleaned += store_cleaned; -+ store_cleaned = consume_frames(ch, &rx_cleaned, -+ &tx_conf_cleaned); ++ store_cleaned = consume_frames(ch, &fq); ++ if (!store_cleaned) ++ break; ++ if (fq->type == DPAA2_RX_FQ) { ++ rx_cleaned += store_cleaned; ++ /* If these are XDP_REDIRECT frames, flush them now */ ++ /* TODO: Do we need this? */ ++ if (ch->flush) { ++ xdp_do_flush_map(); ++ ch->flush = false; ++ } ++ } else { ++ txconf_cleaned += store_cleaned; ++ /* We have a single Tx conf FQ on this channel */ ++ txc_fq = fq; ++ } - /* If we have enough budget left for a full store, - * try a new pull dequeue, otherwise we're done here -+ /* If we've either consumed the budget with Rx frames, -+ * or reached the Tx conf threshold, we're done. ++ /* If we either consumed the whole NAPI budget with Rx frames ++ * or we reached the Tx confirmations threshold, we're done. */ - if (store_cleaned == 0 || - cleaned > budget - DPAA2_ETH_STORE_SIZE) - break; - } -- ++ if (rx_cleaned >= budget || ++ txconf_cleaned >= DPAA2_ETH_TXCONF_PER_NAPI) { ++ work_done = budget; ++ goto out; ++ } ++ } while (store_cleaned); + - if (cleaned < budget) { - napi_complete_done(napi, cleaned); - /* Re-enable data available notifications */ @@ -2993,29 +3062,69 @@ Signed-off-by: Biwen Li - cpu_relax(); - } while (err == -EBUSY); - } -+ if (rx_cleaned >= budget || -+ tx_conf_cleaned >= TX_CONF_PER_NAPI_POLL) -+ return budget; -+ } while (store_cleaned); - -- ch->stats.frames += cleaned; -+ /* We didn't consume the entire budget, finish napi and ++ /* We didn't consume the entire budget, so finish napi and + * re-enable data availability notifications + */ -+ napi_complete(napi); ++ napi_complete_done(napi, rx_cleaned); + do { + err = dpaa2_io_service_rearm(ch->dpio, &ch->nctx); + cpu_relax(); + } while (err == -EBUSY); -+ WARN_ONCE(err, "CDAN notifications rearm failed on core %d", -+ ch->nctx.desired_cpu); ++ WARN_ONCE(err, "CDAN notifications rearm failed on core %d", ++ ch->nctx.desired_cpu); + +- ch->stats.frames += cleaned; ++ work_done = max(rx_cleaned, 1); - return cleaned; -+ return max(rx_cleaned, 1); ++out: ++ if (txc_fq) { ++ nq = netdev_get_tx_queue(priv->net_dev, txc_fq->flowid); ++ netdev_tx_completed_queue(nq, txc_fq->dq_frames, ++ txc_fq->dq_bytes); ++ txc_fq->dq_frames = 0; ++ txc_fq->dq_bytes = 0; ++ } ++ ++ return work_done; } static void enable_ch_napi(struct dpaa2_eth_priv *priv) -@@ -1006,28 +1323,30 @@ static int dpaa2_eth_open(struct net_dev +@@ -970,9 +1260,23 @@ static void disable_ch_napi(struct dpaa2 + } + } + ++static void update_tx_fqids(struct dpaa2_eth_priv *priv); ++ ++static void update_pf(struct dpaa2_eth_priv *priv, ++ struct dpni_link_state *state) ++{ ++ bool pause_frames; ++ ++ pause_frames = !!(state->options & DPNI_LINK_OPT_PAUSE); ++ if (priv->tx_pause_frames != pause_frames) { ++ priv->tx_pause_frames = pause_frames; ++ set_rx_taildrop(priv); ++ } ++} ++ + static int link_state_update(struct dpaa2_eth_priv *priv) + { +- struct dpni_link_state state; ++ struct dpni_link_state state = {0}; + int err; + + err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, &state); +@@ -988,6 +1292,8 @@ static int link_state_update(struct dpaa + + priv->link_state = state; + if (state.up) { ++ update_tx_fqids(priv); ++ update_pf(priv, &state); + netif_carrier_on(priv->net_dev); + netif_tx_start_all_queues(priv->net_dev); + } else { +@@ -1006,28 +1312,30 @@ static int dpaa2_eth_open(struct net_dev struct dpaa2_eth_priv *priv = netdev_priv(net_dev); int err; @@ -3057,7 +3166,7 @@ Signed-off-by: Biwen Li err = dpni_enable(priv->mc_io, 0, priv->mc_token); if (err < 0) { netdev_err(net_dev, "dpni_enable() failed\n"); -@@ -1047,48 +1366,17 @@ static int dpaa2_eth_open(struct net_dev +@@ -1047,51 +1355,20 @@ static int dpaa2_eth_open(struct net_dev link_state_err: enable_err: @@ -3072,7 +3181,8 @@ Signed-off-by: Biwen Li - */ -static u32 drain_channel(struct dpaa2_eth_priv *priv, - struct dpaa2_eth_channel *ch) --{ ++static int dpaa2_eth_stop(struct net_device *net_dev) + { - u32 drained = 0, total = 0; - - do { @@ -3083,7 +3193,11 @@ Signed-off-by: Biwen Li - - return total; -} -- ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int dpni_enabled = 0; ++ int retries = 10, i; ++ int err = 0; + -static u32 drain_ingress_frames(struct dpaa2_eth_priv *priv) -{ - struct dpaa2_eth_channel *ch; @@ -3098,18 +3212,21 @@ Signed-off-by: Biwen Li - return drained; -} - - static int dpaa2_eth_stop(struct net_device *net_dev) - { - struct dpaa2_eth_priv *priv = netdev_priv(net_dev); - int dpni_enabled; +-static int dpaa2_eth_stop(struct net_device *net_dev) +-{ +- struct dpaa2_eth_priv *priv = netdev_priv(net_dev); +- int dpni_enabled; - int retries = 10; - u32 drained; -+ int retries = 10, i; -+ int err = 0; - - netif_tx_stop_all_queues(net_dev); - netif_carrier_off(net_dev); -@@ -1105,56 +1393,24 @@ static int dpaa2_eth_stop(struct net_dev +- +- netif_tx_stop_all_queues(net_dev); +- netif_carrier_off(net_dev); ++ netif_tx_stop_all_queues(net_dev); ++ netif_carrier_off(net_dev); + + /* Loop while dpni_disable() attempts to drain the egress FQs + * and confirm them back to us. +@@ -1105,56 +1382,24 @@ static int dpaa2_eth_stop(struct net_dev } while (dpni_enabled && --retries); if (!retries) { netdev_warn(net_dev, "Retry count exceeded disabling DPNI\n"); @@ -3176,7 +3293,7 @@ Signed-off-by: Biwen Li } static int dpaa2_eth_set_addr(struct net_device *net_dev, void *addr) -@@ -1200,25 +1456,6 @@ static void dpaa2_eth_get_stats(struct n +@@ -1200,25 +1445,6 @@ static void dpaa2_eth_get_stats(struct n } } @@ -3202,7 +3319,7 @@ Signed-off-by: Biwen Li /* Copy mac unicast addresses from @net_dev to @priv. * Its sole purpose is to make dpaa2_eth_set_rx_mode() more readable. */ -@@ -1380,16 +1617,363 @@ static int dpaa2_eth_set_features(struct +@@ -1380,16 +1606,430 @@ static int dpaa2_eth_set_features(struct return 0; } @@ -3249,6 +3366,7 @@ Signed-off-by: Biwen Li +{ + struct device *dev = priv->net_dev->dev.parent; + struct dpni_buffer_layout buf_layout = {0}; ++ u16 rx_buf_align; + int err; + + /* We need to check for WRIOP version 1.0.0, but depending on the MC @@ -3257,15 +3375,15 @@ Signed-off-by: Biwen Li + */ + if (priv->dpni_attrs.wriop_version == DPAA2_WRIOP_VERSION(0, 0, 0) || + priv->dpni_attrs.wriop_version == DPAA2_WRIOP_VERSION(1, 0, 0)) -+ priv->rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN_REV1; ++ rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN_REV1; + else -+ priv->rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN; ++ rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN; + + /* tx buffer */ -+ buf_layout.pass_timestamp = true; + buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE; -+ buf_layout.options = DPNI_BUF_LAYOUT_OPT_TIMESTAMP | -+ DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE; ++ buf_layout.pass_timestamp = true; ++ buf_layout.options = DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE | ++ DPNI_BUF_LAYOUT_OPT_TIMESTAMP; + err = dpni_set_buffer_layout(priv->mc_io, 0, priv->mc_token, + DPNI_QUEUE_TX, &buf_layout); + if (err) { @@ -3299,9 +3417,9 @@ Signed-off-by: Biwen Li + /* rx buffer */ + buf_layout.pass_frame_status = true; + buf_layout.pass_parser_result = true; -+ buf_layout.data_align = priv->rx_buf_align; -+ buf_layout.private_data_size = 0; ++ buf_layout.data_align = rx_buf_align; + buf_layout.data_head_room = dpaa2_eth_rx_headroom(priv); ++ buf_layout.private_data_size = 0; + /* If XDP program is attached, reserve extra space for + * potential header expansions + */ @@ -3322,6 +3440,73 @@ Signed-off-by: Biwen Li + return 0; +} + ++#define DPNI_ENQUEUE_FQID_VER_MAJOR 7 ++#define DPNI_ENQUEUE_FQID_VER_MINOR 9 ++ ++static inline int dpaa2_eth_enqueue_qd(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq, ++ struct dpaa2_fd *fd, u8 prio) ++{ ++ return dpaa2_io_service_enqueue_qd(fq->channel->dpio, ++ priv->tx_qdid, prio, ++ fq->tx_qdbin, fd); ++} ++ ++static inline int dpaa2_eth_enqueue_fq(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq, ++ struct dpaa2_fd *fd, ++ u8 prio __always_unused) ++{ ++ return dpaa2_io_service_enqueue_fq(fq->channel->dpio, ++ fq->tx_fqid, fd); ++} ++ ++static void set_enqueue_mode(struct dpaa2_eth_priv *priv) ++{ ++ if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_ENQUEUE_FQID_VER_MAJOR, ++ DPNI_ENQUEUE_FQID_VER_MINOR) < 0) ++ priv->enqueue = dpaa2_eth_enqueue_qd; ++ else ++ priv->enqueue = dpaa2_eth_enqueue_fq; ++} ++ ++static void update_tx_fqids(struct dpaa2_eth_priv *priv) ++{ ++ struct dpaa2_eth_fq *fq; ++ struct dpni_queue queue; ++ struct dpni_queue_id qid = {0}; ++ int i, err; ++ ++ /* We only use Tx FQIDs for FQID-based enqueue, so check ++ * if DPNI version supports it before updating FQIDs ++ */ ++ if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_ENQUEUE_FQID_VER_MAJOR, ++ DPNI_ENQUEUE_FQID_VER_MINOR) < 0) ++ return; ++ ++ for (i = 0; i < priv->num_fqs; i++) { ++ fq = &priv->fq[i]; ++ if (fq->type != DPAA2_TX_CONF_FQ) ++ continue; ++ err = dpni_get_queue(priv->mc_io, 0, priv->mc_token, ++ DPNI_QUEUE_TX, 0, fq->flowid, ++ &queue, &qid); ++ if (err) ++ goto out_err; ++ ++ fq->tx_fqid = qid.fqid; ++ if (fq->tx_fqid == 0) ++ goto out_err; ++ } ++ ++ return; ++ ++out_err: ++ netdev_info(priv->net_dev, ++ "Error reading Tx FQID, fallback to QDID-based enqueue"); ++ priv->enqueue = dpaa2_eth_enqueue_qd; ++} ++ +static int dpaa2_eth_set_xdp(struct net_device *net_dev, struct bpf_prog *prog) +{ + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); @@ -3471,7 +3656,6 @@ Signed-off-by: Biwen Li + * so we do the actual frame enqueue in ndo_xdp_xmit + */ +} -+ +static int dpaa2_eth_update_xps(struct dpaa2_eth_priv *priv) +{ + struct net_device *net_dev = priv->net_dev; @@ -3568,7 +3752,7 @@ Signed-off-by: Biwen Li }; static void cdan_cb(struct dpaa2_io_notification_ctx *ctx) -@@ -1422,34 +2006,32 @@ static struct fsl_mc_device *setup_dpcon +@@ -1422,34 +2062,32 @@ static struct fsl_mc_device *setup_dpcon err = dpcon_open(priv->mc_io, 0, dpcon->obj_desc.id, &dpcon->mc_handle); if (err) { dev_err(dev, "dpcon_open() failed\n"); @@ -3609,7 +3793,7 @@ Signed-off-by: Biwen Li fsl_mc_object_free(dpcon); return NULL; -@@ -1502,7 +2084,14 @@ err_setup: +@@ -1502,7 +2140,14 @@ err_setup: static void free_channel(struct dpaa2_eth_priv *priv, struct dpaa2_eth_channel *channel) { @@ -3624,35 +3808,51 @@ Signed-off-by: Biwen Li kfree(channel); } -@@ -1546,7 +2135,8 @@ static int setup_dpio(struct dpaa2_eth_p +@@ -1546,7 +2191,8 @@ static int setup_dpio(struct dpaa2_eth_p nctx->desired_cpu = i; /* Register the new context */ - err = dpaa2_io_service_register(NULL, nctx); + channel->dpio = dpaa2_io_service_select(i); -+ err = dpaa2_io_service_register(channel->dpio, nctx); ++ err = dpaa2_io_service_register(channel->dpio, nctx, dev); if (err) { dev_dbg(dev, "No affine DPIO for cpu %d\n", i); /* If no affine DPIO for this core, there's probably -@@ -1586,7 +2176,7 @@ static int setup_dpio(struct dpaa2_eth_p +@@ -1579,14 +2225,14 @@ static int setup_dpio(struct dpaa2_eth_p + /* Stop if we already have enough channels to accommodate all + * RX and TX conf queues + */ +- if (priv->num_channels == dpaa2_eth_queue_count(priv)) ++ if (priv->num_channels == priv->dpni_attrs.num_queues) + break; + } + return 0; err_set_cdan: - dpaa2_io_service_deregister(NULL, nctx); -+ dpaa2_io_service_deregister(channel->dpio, nctx); ++ dpaa2_io_service_deregister(channel->dpio, nctx, dev); err_service_reg: free_channel(priv, channel); err_alloc_ch: -@@ -1609,7 +2199,7 @@ static void free_dpio(struct dpaa2_eth_p +@@ -1603,13 +2249,14 @@ err_alloc_ch: + + static void free_dpio(struct dpaa2_eth_priv *priv) + { +- int i; ++ struct device *dev = priv->net_dev->dev.parent; + struct dpaa2_eth_channel *ch; ++ int i; + /* deregister CDAN notifications and free channels */ for (i = 0; i < priv->num_channels; i++) { ch = priv->channel[i]; - dpaa2_io_service_deregister(NULL, &ch->nctx); -+ dpaa2_io_service_deregister(ch->dpio, &ch->nctx); ++ dpaa2_io_service_deregister(ch->dpio, &ch->nctx, dev); free_channel(priv, ch); } } -@@ -1636,8 +2226,7 @@ static void set_fq_affinity(struct dpaa2 +@@ -1636,8 +2283,7 @@ static void set_fq_affinity(struct dpaa2 { struct device *dev = priv->net_dev->dev.parent; struct dpaa2_eth_fq *fq; @@ -3662,7 +3862,7 @@ Signed-off-by: Biwen Li /* For each FQ, pick one channel/CPU to deliver frames to. * This may well change at runtime, either through irqbalance or -@@ -1649,6 +2238,7 @@ static void set_fq_affinity(struct dpaa2 +@@ -1649,6 +2295,7 @@ static void set_fq_affinity(struct dpaa2 fq = &priv->fq[i]; switch (fq->type) { case DPAA2_RX_FQ: @@ -3670,15 +3870,7 @@ Signed-off-by: Biwen Li fq->target_cpu = rx_cpu; rx_cpu = cpumask_next(rx_cpu, &priv->dpio_cpumask); if (rx_cpu >= nr_cpu_ids) -@@ -1656,6 +2246,7 @@ static void set_fq_affinity(struct dpaa2 - break; - case DPAA2_TX_CONF_FQ: - fq->target_cpu = txc_cpu; -+ - txc_cpu = cpumask_next(txc_cpu, &priv->dpio_cpumask); - if (txc_cpu >= nr_cpu_ids) - txc_cpu = cpumask_first(&priv->dpio_cpumask); -@@ -1665,11 +2256,13 @@ static void set_fq_affinity(struct dpaa2 +@@ -1665,11 +2312,13 @@ static void set_fq_affinity(struct dpaa2 } fq->channel = get_affine_channel(priv, fq->target_cpu); } @@ -3693,7 +3885,7 @@ Signed-off-by: Biwen Li /* We have one TxConf FQ per Tx flow. * The number of Tx and Rx queues is the same. -@@ -1681,11 +2274,19 @@ static void setup_fqs(struct dpaa2_eth_p +@@ -1681,11 +2330,19 @@ static void setup_fqs(struct dpaa2_eth_p priv->fq[priv->num_fqs++].flowid = (u16)i; } @@ -3718,7 +3910,7 @@ Signed-off-by: Biwen Li /* For each FQ, decide on which core to process incoming frames */ set_fq_affinity(priv); -@@ -1735,6 +2336,9 @@ static int setup_dpbp(struct dpaa2_eth_p +@@ -1735,6 +2392,9 @@ static int setup_dpbp(struct dpaa2_eth_p } priv->bpid = dpbp_attrs.bpid; @@ -3728,59 +3920,7 @@ Signed-off-by: Biwen Li return 0; err_get_attr: -@@ -1756,13 +2360,59 @@ static void free_dpbp(struct dpaa2_eth_p - fsl_mc_object_free(priv->dpbp_dev); - } - -+static int setup_tx_congestion(struct dpaa2_eth_priv *priv) -+{ -+ struct dpni_congestion_notification_cfg notif_cfg = {0}; -+ struct device *dev = priv->net_dev->dev.parent; -+ int err; -+ -+ priv->cscn_unaligned = kzalloc(DPAA2_CSCN_SIZE + DPAA2_CSCN_ALIGN, -+ GFP_KERNEL); -+ -+ if (!priv->cscn_unaligned) -+ return -ENOMEM; -+ -+ priv->cscn_mem = PTR_ALIGN(priv->cscn_unaligned, DPAA2_CSCN_ALIGN); -+ priv->cscn_dma = dma_map_single(dev, priv->cscn_mem, DPAA2_CSCN_SIZE, -+ DMA_FROM_DEVICE); -+ if (dma_mapping_error(dev, priv->cscn_dma)) { -+ dev_err(dev, "Error mapping CSCN memory area\n"); -+ err = -ENOMEM; -+ goto err_dma_map; -+ } -+ -+ notif_cfg.units = DPNI_CONGESTION_UNIT_BYTES; -+ notif_cfg.threshold_entry = DPAA2_ETH_TX_CONG_ENTRY_THRESH; -+ notif_cfg.threshold_exit = DPAA2_ETH_TX_CONG_EXIT_THRESH; -+ notif_cfg.message_ctx = (u64)priv; -+ notif_cfg.message_iova = priv->cscn_dma; -+ notif_cfg.notification_mode = DPNI_CONG_OPT_WRITE_MEM_ON_ENTER | -+ DPNI_CONG_OPT_WRITE_MEM_ON_EXIT | -+ DPNI_CONG_OPT_COHERENT_WRITE; -+ err = dpni_set_congestion_notification(priv->mc_io, 0, priv->mc_token, -+ DPNI_QUEUE_TX, 0, ¬if_cfg); -+ if (err) { -+ dev_err(dev, "dpni_set_congestion_notification failed\n"); -+ goto err_set_cong; -+ } -+ -+ return 0; -+ -+err_set_cong: -+ dma_unmap_single(dev, priv->cscn_dma, DPAA2_CSCN_SIZE, DMA_FROM_DEVICE); -+err_dma_map: -+ kfree(priv->cscn_unaligned); -+ -+ return err; -+} -+ - /* Configure the DPNI object this interface is associated with */ - static int setup_dpni(struct fsl_mc_device *ls_dev) - { +@@ -1762,7 +2422,7 @@ static int setup_dpni(struct fsl_mc_devi struct device *dev = &ls_dev->dev; struct dpaa2_eth_priv *priv; struct net_device *net_dev; @@ -3789,7 +3929,7 @@ Signed-off-by: Biwen Li int err; net_dev = dev_get_drvdata(dev); -@@ -1772,7 +2422,22 @@ static int setup_dpni(struct fsl_mc_devi +@@ -1772,7 +2432,22 @@ static int setup_dpni(struct fsl_mc_devi err = dpni_open(priv->mc_io, 0, ls_dev->obj_desc.id, &priv->mc_token); if (err) { dev_err(dev, "dpni_open() failed\n"); @@ -3813,7 +3953,7 @@ Signed-off-by: Biwen Li } ls_dev->mc_io = priv->mc_io; -@@ -1781,82 +2446,53 @@ static int setup_dpni(struct fsl_mc_devi +@@ -1781,77 +2456,41 @@ static int setup_dpni(struct fsl_mc_devi err = dpni_reset(priv->mc_io, 0, priv->mc_token); if (err) { dev_err(dev, "dpni_reset() failed\n"); @@ -3858,10 +3998,7 @@ Signed-off-by: Biwen Li - dev_err(dev, "dpni_set_buffer_layout(TX) failed\n"); - goto err_buf_layout; - } -+ /* Enable congestion notifications for Tx queues */ -+ err = setup_tx_congestion(priv); -+ if (err) -+ goto close; ++ set_enqueue_mode(priv); - /* tx-confirm buffer */ - buf_layout.options = DPNI_BUF_LAYOUT_OPT_FRAME_STATUS; @@ -3871,9 +4008,8 @@ Signed-off-by: Biwen Li - dev_err(dev, "dpni_set_buffer_layout(TX_CONF) failed\n"); - goto err_buf_layout; - } -+ /* allocate classification rule space */ -+ priv->cls_rule = kzalloc(sizeof(*priv->cls_rule) * -+ dpaa2_eth_fs_count(priv), GFP_KERNEL); ++ priv->cls_rule = devm_kzalloc(dev, sizeof(struct dpaa2_eth_cls_rule) * ++ dpaa2_eth_fs_count(priv), GFP_KERNEL); + if (!priv->cls_rule) + goto close; @@ -3890,7 +4026,7 @@ Signed-off-by: Biwen Li - dev_err(dev, "dpni_get_tx_data_offset() failed\n"); - goto err_data_offset; + dev_err(dev, "dpni_set_link_cfg() failed\n"); -+ goto cls_free; ++ goto close; } - if ((priv->tx_data_offset % 64) != 0) @@ -3906,8 +4042,6 @@ Signed-off-by: Biwen Li -err_buf_layout: -err_get_attr: -err_reset: -+cls_free: -+ kfree(priv->cls_rule); +close: dpni_close(priv->mc_io, 0, priv->mc_token); -err_open: @@ -3915,25 +4049,15 @@ Signed-off-by: Biwen Li return err; } - static void free_dpni(struct dpaa2_eth_priv *priv) - { -+ struct device *dev = priv->net_dev->dev.parent; - int err; - - err = dpni_reset(priv->mc_io, 0, priv->mc_token); -@@ -1865,6 +2501,11 @@ static void free_dpni(struct dpaa2_eth_p +@@ -1865,6 +2504,7 @@ static void free_dpni(struct dpaa2_eth_p err); dpni_close(priv->mc_io, 0, priv->mc_token); + -+ kfree(priv->cls_rule); -+ -+ dma_unmap_single(dev, priv->cscn_dma, DPAA2_CSCN_SIZE, DMA_FROM_DEVICE); -+ kfree(priv->cscn_unaligned); } static int setup_rx_flow(struct dpaa2_eth_priv *priv, -@@ -1873,11 +2514,10 @@ static int setup_rx_flow(struct dpaa2_et +@@ -1873,11 +2513,10 @@ static int setup_rx_flow(struct dpaa2_et struct device *dev = priv->net_dev->dev.parent; struct dpni_queue queue; struct dpni_queue_id qid; @@ -3946,16 +4070,24 @@ Signed-off-by: Biwen Li if (err) { dev_err(dev, "dpni_get_queue(RX) failed\n"); return err; -@@ -1890,7 +2530,7 @@ static int setup_rx_flow(struct dpaa2_et +@@ -1889,24 +2528,136 @@ static int setup_rx_flow(struct dpaa2_et + queue.destination.type = DPNI_DEST_DPCON; queue.destination.priority = 1; queue.user_context = (u64)(uintptr_t)fq; ++ queue.flc.stash_control = 1; ++ queue.flc.value &= 0xFFFFFFFFFFFFFFC0; ++ /* 01 01 00 - data, annotation, flow context*/ ++ queue.flc.value |= 0x14; ++ err = dpni_set_queue(priv->mc_io, 0, priv->mc_token, - DPNI_QUEUE_RX, 0, fq->flowid, +- DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST, + DPNI_QUEUE_RX, fq->tc, fq->flowid, - DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST, ++ DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST | ++ DPNI_QUEUE_OPT_FLC, &queue); if (err) { -@@ -1898,15 +2538,121 @@ static int setup_rx_flow(struct dpaa2_et + dev_err(dev, "dpni_set_queue(RX) failed\n"); return err; } @@ -4084,7 +4216,15 @@ Signed-off-by: Biwen Li return 0; } -@@ -1953,23 +2699,88 @@ static int setup_tx_flow(struct dpaa2_et +@@ -1926,6 +2677,7 @@ static int setup_tx_flow(struct dpaa2_et + } + + fq->tx_qdbin = qid.qdbin; ++ fq->tx_fqid = qid.fqid; + + err = dpni_get_queue(priv->mc_io, 0, priv->mc_token, + DPNI_QUEUE_TX_CONFIRM, 0, fq->flowid, +@@ -1953,23 +2705,88 @@ static int setup_tx_flow(struct dpaa2_et return 0; } @@ -4124,8 +4264,8 @@ Signed-off-by: Biwen Li +} +#endif + -+/* default hash key fields */ -+static struct dpaa2_eth_dist_fields default_dist_fields[] = { ++/* Supported header fields for Rx hash distribution key */ ++static const struct dpaa2_eth_dist_fields dist_fields[] = { { + /* L2 header */ + .rxnfc_field = RXH_L2DA, @@ -4175,7 +4315,7 @@ Signed-off-by: Biwen Li .size = 1, }, { /* Using UDP ports, this is functionally equivalent to raw -@@ -1978,90 +2789,182 @@ static const struct dpaa2_eth_hash_field +@@ -1978,41 +2795,170 @@ static const struct dpaa2_eth_hash_field .rxnfc_field = RXH_L4_B_0_1, .cls_prot = NET_PROT_UDP, .cls_field = NH_FLD_UDP_PORT_SRC, @@ -4191,161 +4331,265 @@ Signed-off-by: Biwen Li }; -/* Set RX hash options -- * flags is a combination of RXH_ bits -- */ --static int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags) -+static int legacy_config_dist_key(struct dpaa2_eth_priv *priv, -+ dma_addr_t key_iova) - { -- struct device *dev = net_dev->dev.parent; -- struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -- struct dpkg_profile_cfg cls_cfg; ++/* Configure the Rx hash key using the legacy API */ ++static int config_legacy_hash_key(struct dpaa2_eth_priv *priv, dma_addr_t key) ++{ + struct device *dev = priv->net_dev->dev.parent; - struct dpni_rx_tc_dist_cfg dist_cfg; -- u8 *dma_mem; -- int i; -- int err = 0; -+ int i, err; - -- if (!dpaa2_eth_hash_enabled(priv)) { -- dev_dbg(dev, "Hashing support is not enabled\n"); -- return 0; -+ /* In legacy mode, we can't configure flow steering independently */ -+ if (!dpaa2_eth_hash_enabled(priv)) -+ return -EOPNOTSUPP; ++ struct dpni_rx_tc_dist_cfg dist_cfg; ++ int i, err = 0; + + memset(&dist_cfg, 0, sizeof(dist_cfg)); + -+ dist_cfg.key_cfg_iova = key_iova; ++ dist_cfg.key_cfg_iova = key; + dist_cfg.dist_size = dpaa2_eth_queue_count(priv); -+ if (dpaa2_eth_fs_enabled(priv)) { -+ dist_cfg.dist_mode = DPNI_DIST_MODE_FS; -+ dist_cfg.fs_cfg.miss_action = DPNI_FS_MISS_HASH; -+ } else { -+ dist_cfg.dist_mode = DPNI_DIST_MODE_HASH; - } - -- memset(&cls_cfg, 0, sizeof(cls_cfg)); ++ dist_cfg.dist_mode = DPNI_DIST_MODE_HASH; ++ + for (i = 0; i < dpaa2_eth_tc_count(priv); i++) { -+ err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, i, -+ &dist_cfg); ++ err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, ++ i, &dist_cfg); + if (err) { + dev_err(dev, "dpni_set_rx_tc_dist failed\n"); -+ return err; ++ break; + } + } + -+ return 0; ++ return err; +} + -+static int config_hash_key(struct dpaa2_eth_priv *priv, dma_addr_t key_iova) ++/* Configure the Rx hash key using the new API */ ++static int config_hash_key(struct dpaa2_eth_priv *priv, dma_addr_t key) +{ + struct device *dev = priv->net_dev->dev.parent; + struct dpni_rx_dist_cfg dist_cfg; -+ int i, err; - -- for (i = 0; i < ARRAY_SIZE(hash_fields); i++) { -- struct dpkg_extract *key = -- &cls_cfg.extracts[cls_cfg.num_extracts]; -+ if (!dpaa2_eth_hash_enabled(priv)) -+ return -EOPNOTSUPP; - -- if (!(flags & hash_fields[i].rxnfc_field)) -- continue; ++ int i, err = 0; ++ + memset(&dist_cfg, 0, sizeof(dist_cfg)); + -+ dist_cfg.key_cfg_iova = key_iova; ++ dist_cfg.key_cfg_iova = key; + dist_cfg.dist_size = dpaa2_eth_queue_count(priv); -+ dist_cfg.enable = true; ++ dist_cfg.enable = 1; + + for (i = 0; i < dpaa2_eth_tc_count(priv); i++) { + dist_cfg.tc = i; -+ -+ err = dpni_set_rx_hash_dist(priv->mc_io, 0, -+ priv->mc_token, &dist_cfg); ++ err = dpni_set_rx_hash_dist(priv->mc_io, 0, priv->mc_token, ++ &dist_cfg); + if (err) { + dev_err(dev, "dpni_set_rx_hash_dist failed\n"); -+ return err; ++ break; + } + } + -+ return 0; ++ return err; +} + -+static int config_fs_key(struct dpaa2_eth_priv *priv, dma_addr_t key_iova) ++/* Configure the Rx flow classification key */ ++static int config_cls_key(struct dpaa2_eth_priv *priv, dma_addr_t key) +{ + struct device *dev = priv->net_dev->dev.parent; + struct dpni_rx_dist_cfg dist_cfg; -+ int i, err; - -- if (cls_cfg.num_extracts >= DPKG_MAX_NUM_OF_EXTRACTS) { -- dev_err(dev, "error adding key extraction rule, too many rules?\n"); -- return -E2BIG; -+ if (!dpaa2_eth_fs_enabled(priv)) -+ return -EOPNOTSUPP; ++ int i, err = 0; + + memset(&dist_cfg, 0, sizeof(dist_cfg)); + -+ dist_cfg.key_cfg_iova = key_iova; ++ dist_cfg.key_cfg_iova = key; + dist_cfg.dist_size = dpaa2_eth_queue_count(priv); -+ dist_cfg.enable = true; ++ dist_cfg.enable = 1; + + for (i = 0; i < dpaa2_eth_tc_count(priv); i++) { + dist_cfg.tc = i; -+ -+ err = dpni_set_rx_fs_dist(priv->mc_io, 0, -+ priv->mc_token, &dist_cfg); ++ err = dpni_set_rx_fs_dist(priv->mc_io, 0, priv->mc_token, ++ &dist_cfg); + if (err) { + dev_err(dev, "dpni_set_rx_fs_dist failed\n"); -+ return err; - } ++ break; ++ } + } + -+ return 0; ++ return err; +} - -+int dpaa2_eth_set_dist_key(struct dpaa2_eth_priv *priv, -+ enum dpaa2_eth_rx_dist type, u32 key_fields) -+{ -+ struct device *dev = priv->net_dev->dev.parent; -+ struct dpkg_profile_cfg cls_cfg; -+ struct dpkg_extract *key; -+ u32 hash_fields = 0; -+ dma_addr_t key_iova; -+ u8 *key_mem; -+ int i, err; + -+ memset(&cls_cfg, 0, sizeof(cls_cfg)); ++/* Size of the Rx flow classification key */ ++int dpaa2_eth_cls_key_size(u64 fields) ++{ ++ int i, size = 0; + -+ for (i = 0; i < priv->num_dist_fields; i++) { -+ if (!(key_fields & priv->dist_fields[i].id)) ++ for (i = 0; i < ARRAY_SIZE(dist_fields); i++) { ++ if (!(fields & dist_fields[i].id)) + continue; ++ size += dist_fields[i].size; ++ } ++ ++ return size; ++} ++ ++/* Offset of header field in Rx classification key */ ++int dpaa2_eth_cls_fld_off(int prot, int field) ++{ ++ int i, off = 0; ++ ++ for (i = 0; i < ARRAY_SIZE(dist_fields); i++) { ++ if (dist_fields[i].cls_prot == prot && ++ dist_fields[i].cls_field == field) ++ return off; ++ off += dist_fields[i].size; ++ } ++ ++ WARN_ONCE(1, "Unsupported header field used for Rx flow cls\n"); ++ return 0; ++} ++ ++/* Prune unused fields from the classification rule. ++ * Used when masking is not supported ++ */ ++void dpaa2_eth_cls_trim_rule(void *key_mem, u64 fields) ++{ ++ int off = 0, new_off = 0; ++ int i, size; ++ ++ for (i = 0; i < ARRAY_SIZE(dist_fields); i++) { ++ size = dist_fields[i].size; ++ if (dist_fields[i].id & fields) { ++ memcpy(key_mem + new_off, key_mem + off, size); ++ new_off += size; ++ } ++ off += size; ++ } ++} + -+ key = &cls_cfg.extracts[cls_cfg.num_extracts]; ++/* Set Rx distribution (hash or flow classification) key + * flags is a combination of RXH_ bits + */ +-static int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags) ++static int dpaa2_eth_set_dist_key(struct net_device *net_dev, ++ enum dpaa2_eth_rx_dist type, u64 flags) + { + struct device *dev = net_dev->dev.parent; + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + struct dpkg_profile_cfg cls_cfg; +- struct dpni_rx_tc_dist_cfg dist_cfg; ++ u32 rx_hash_fields = 0; ++ dma_addr_t key_iova; + u8 *dma_mem; + int i; + int err = 0; + +- if (!dpaa2_eth_hash_enabled(priv)) { +- dev_dbg(dev, "Hashing support is not enabled\n"); +- return 0; +- } +- + memset(&cls_cfg, 0, sizeof(cls_cfg)); + +- for (i = 0; i < ARRAY_SIZE(hash_fields); i++) { ++ for (i = 0; i < ARRAY_SIZE(dist_fields); i++) { + struct dpkg_extract *key = + &cls_cfg.extracts[cls_cfg.num_extracts]; + +- if (!(flags & hash_fields[i].rxnfc_field)) ++ /* For both Rx hashing and classification keys ++ * we set only the selected fields. ++ */ ++ if (!(flags & dist_fields[i].id)) + continue; ++ if (type == DPAA2_ETH_RX_DIST_HASH) ++ rx_hash_fields |= dist_fields[i].rxnfc_field; + + if (cls_cfg.num_extracts >= DPKG_MAX_NUM_OF_EXTRACTS) { + dev_err(dev, "error adding key extraction rule, too many rules?\n"); +@@ -2020,49 +2966,107 @@ static int dpaa2_eth_set_hash(struct net + } + key->type = DPKG_EXTRACT_FROM_HDR; - key->extract.from_hdr.prot = hash_fields[i].cls_prot; -+ key->extract.from_hdr.prot = priv->dist_fields[i].cls_prot; ++ key->extract.from_hdr.prot = dist_fields[i].cls_prot; key->extract.from_hdr.type = DPKG_FULL_FIELD; - key->extract.from_hdr.field = hash_fields[i].cls_field; -+ key->extract.from_hdr.field = priv->dist_fields[i].cls_field; ++ key->extract.from_hdr.field = dist_fields[i].cls_field; cls_cfg.num_extracts++; ++ } ++ ++ dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL); ++ if (!dma_mem) ++ return -ENOMEM; ++ ++ err = dpni_prepare_key_cfg(&cls_cfg, dma_mem); ++ if (err) { ++ dev_err(dev, "dpni_prepare_key_cfg error %d\n", err); ++ goto free_key; ++ } ++ ++ /* Prepare for setting the rx dist */ ++ key_iova = dma_map_single(dev, dma_mem, DPAA2_CLASSIFIER_DMA_SIZE, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(dev, key_iova)) { ++ dev_err(dev, "DMA mapping failed\n"); ++ err = -ENOMEM; ++ goto free_key; ++ } ++ ++ if (type == DPAA2_ETH_RX_DIST_HASH) { ++ if (dpaa2_eth_has_legacy_dist(priv)) ++ err = config_legacy_hash_key(priv, key_iova); ++ else ++ err = config_hash_key(priv, key_iova); ++ } else { ++ err = config_cls_key(priv, key_iova); ++ } ++ ++ dma_unmap_single(dev, key_iova, DPAA2_CLASSIFIER_DMA_SIZE, ++ DMA_TO_DEVICE); ++ if (!err && type == DPAA2_ETH_RX_DIST_HASH) ++ priv->rx_hash_fields = rx_hash_fields; ++ ++free_key: ++ kfree(dma_mem); ++ return err; ++} ++ ++int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ u64 key = 0; ++ int i; ++ ++ if (!dpaa2_eth_hash_enabled(priv)) ++ return -EOPNOTSUPP; ++ ++ for (i = 0; i < ARRAY_SIZE(dist_fields); i++) ++ if (dist_fields[i].rxnfc_field & flags) ++ key |= dist_fields[i].id; ++ ++ return dpaa2_eth_set_dist_key(net_dev, DPAA2_ETH_RX_DIST_HASH, key); ++} ++ ++int dpaa2_eth_set_cls(struct net_device *net_dev, u64 flags) ++{ ++ return dpaa2_eth_set_dist_key(net_dev, DPAA2_ETH_RX_DIST_CLS, flags); ++} ++ ++static int dpaa2_eth_set_default_cls(struct dpaa2_eth_priv *priv) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ int err; - priv->rx_hash_fields |= hash_fields[i].rxnfc_field; -+ hash_fields |= priv->dist_fields[i].rxnfc_field; ++ /* Check if we actually support Rx flow classification */ ++ if (dpaa2_eth_has_legacy_dist(priv)) { ++ dev_dbg(dev, "Rx cls not supported by current MC version\n"); ++ return -EOPNOTSUPP; } - dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL); - if (!dma_mem) -+ key_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_KERNEL); -+ if (!key_mem) - return -ENOMEM; - +- return -ENOMEM; +- - err = dpni_prepare_key_cfg(&cls_cfg, dma_mem); -+ err = dpni_prepare_key_cfg(&cls_cfg, key_mem); - if (err) { - dev_err(dev, "dpni_prepare_key_cfg error %d\n", err); +- if (err) { +- dev_err(dev, "dpni_prepare_key_cfg error %d\n", err); - goto err_prep_key; -+ goto free_key; ++ if (!dpaa2_eth_fs_enabled(priv)) { ++ dev_dbg(dev, "Rx cls disabled in DPNI options\n"); ++ return -EOPNOTSUPP; } - memset(&dist_cfg, 0, sizeof(dist_cfg)); @@ -4355,57 +4599,43 @@ Signed-off-by: Biwen Li - DPAA2_CLASSIFIER_DMA_SIZE, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, dist_cfg.key_cfg_iova)) { -+ key_iova = dma_map_single(dev, key_mem, DPAA2_CLASSIFIER_DMA_SIZE, -+ DMA_TO_DEVICE); -+ if (dma_mapping_error(dev, key_iova)) { - dev_err(dev, "DMA mapping failed\n"); - err = -ENOMEM; +- dev_err(dev, "DMA mapping failed\n"); +- err = -ENOMEM; - goto err_dma_map; -+ goto free_key; ++ if (!dpaa2_eth_hash_enabled(priv)) { ++ dev_dbg(dev, "Rx cls disabled for single queue DPNIs\n"); ++ return -EOPNOTSUPP; } - dist_cfg.dist_size = dpaa2_eth_queue_count(priv); - dist_cfg.dist_mode = DPNI_DIST_MODE_HASH; -+ switch (type) { -+ case DPAA2_ETH_RX_DIST_LEGACY: -+ err = legacy_config_dist_key(priv, key_iova); -+ break; -+ case DPAA2_ETH_RX_DIST_HASH: -+ err = config_hash_key(priv, key_iova); -+ break; -+ case DPAA2_ETH_RX_DIST_FS: -+ err = config_fs_key(priv, key_iova); -+ break; -+ default: -+ err = -EINVAL; -+ break; -+ } ++ /* If there is no support for masking in the classification table, ++ * we don't set a default key, as it will depend on the rules ++ * added by the user at runtime. ++ */ ++ if (!dpaa2_eth_fs_mask_enabled(priv)) ++ goto out; - err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, 0, &dist_cfg); - dma_unmap_single(dev, dist_cfg.key_cfg_iova, - DPAA2_CLASSIFIER_DMA_SIZE, DMA_TO_DEVICE); -- if (err) ++ err = dpaa2_eth_set_cls(priv->net_dev, DPAA2_ETH_DIST_ALL); + if (err) - dev_err(dev, "dpni_set_rx_tc_dist() error %d\n", err); -+ dma_unmap_single(dev, key_iova, DPAA2_CLASSIFIER_DMA_SIZE, -+ DMA_TO_DEVICE); -+ if (err) { -+ if (err != -EOPNOTSUPP) -+ dev_err(dev, "Distribution key config failed\n"); -+ goto free_key; -+ } ++ return err; -err_dma_map: -err_prep_key: - kfree(dma_mem); -+ if (type != DPAA2_ETH_RX_DIST_FS) -+ priv->rx_hash_fields = hash_fields; +- return err; ++out: ++ priv->rx_cls_enabled = 1; + -+free_key: -+ kfree(key_mem); - return err; ++ return 0; } -@@ -2080,6 +2983,7 @@ static int bind_dpni(struct dpaa2_eth_pr + /* Bind the DPNI to its needed objects and resources: buffer pool, DPIOs, +@@ -2080,6 +3084,7 @@ static int bind_dpni(struct dpaa2_eth_pr pools_params.num_dpbp = 1; pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id; pools_params.pools[0].backup_pool = 0; @@ -4413,36 +4643,28 @@ Signed-off-by: Biwen Li pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUF_SIZE; err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params); if (err) { -@@ -2087,17 +2991,36 @@ static int bind_dpni(struct dpaa2_eth_pr +@@ -2087,17 +3092,28 @@ static int bind_dpni(struct dpaa2_eth_pr return err; } - /* have the interface implicitly distribute traffic based on supported - * header fields -+ /* Verify classification options and disable hashing and/or -+ * flow steering support in case of invalid configuration values ++ /* have the interface implicitly distribute traffic based on ++ * the default hash key */ - err = dpaa2_eth_set_hash(net_dev, DPAA2_RXH_SUPPORTED); - if (err) - netdev_err(net_dev, "Failed to configure hashing\n"); -+ priv->dist_fields = default_dist_fields; -+ priv->num_dist_fields = ARRAY_SIZE(default_dist_fields); -+ check_cls_support(priv); ++ err = dpaa2_eth_set_hash(net_dev, DPAA2_RXH_DEFAULT); ++ if (err && err != -EOPNOTSUPP) ++ dev_err(dev, "Failed to configure hashing\n"); + -+ /* have the interface implicitly distribute traffic based on -+ * a static hash key. Also configure flow steering key, if supported. -+ * Errors here are not blocking, so just let the called function -+ * print its error message and move along. ++ /* Configure the flow classification key; it includes all ++ * supported header fields and cannot be modified at runtime + */ -+ if (dpaa2_eth_has_legacy_dist(priv)) { -+ dpaa2_eth_set_dist_key(priv, DPAA2_ETH_RX_DIST_LEGACY, -+ DPAA2_ETH_DIST_ALL); -+ } else { -+ dpaa2_eth_set_dist_key(priv, DPAA2_ETH_RX_DIST_HASH, -+ DPAA2_ETH_DIST_DEFAULT_HASH); -+ dpaa2_eth_set_dist_key(priv, DPAA2_ETH_RX_DIST_FS, -+ DPAA2_ETH_DIST_ALL); -+ } ++ err = dpaa2_eth_set_default_cls(priv); ++ if (err && err != -EOPNOTSUPP) ++ dev_err(dev, "Failed to configure Rx classification key\n"); /* Configure handling of error frames */ err_cfg.errors = DPAA2_FAS_RX_ERR_MASK; @@ -4455,7 +4677,7 @@ Signed-off-by: Biwen Li err = dpni_set_errors_behavior(priv->mc_io, 0, priv->mc_token, &err_cfg); if (err) { -@@ -2114,6 +3037,11 @@ static int bind_dpni(struct dpaa2_eth_pr +@@ -2114,6 +3130,11 @@ static int bind_dpni(struct dpaa2_eth_pr case DPAA2_TX_CONF_FQ: err = setup_tx_flow(priv, &priv->fq[i]); break; @@ -4467,7 +4689,7 @@ Signed-off-by: Biwen Li default: dev_err(dev, "Invalid FQ type %d\n", priv->fq[i].type); return -EINVAL; -@@ -2237,11 +3165,14 @@ static int netdev_init(struct net_device +@@ -2237,11 +3258,14 @@ static int netdev_init(struct net_device { struct device *dev = net_dev->dev.parent; struct dpaa2_eth_priv *priv = netdev_priv(net_dev); @@ -4482,7 +4704,7 @@ Signed-off-by: Biwen Li err = set_mac_addr(priv); if (err) -@@ -2255,14 +3186,14 @@ static int netdev_init(struct net_device +@@ -2255,14 +3279,14 @@ static int netdev_init(struct net_device return err; } @@ -4493,10 +4715,10 @@ Signed-off-by: Biwen Li - - /* Set MTU limits */ - net_dev->min_mtu = 68; -+ /* Set MTU upper limit; lower limit is default (68B) */ ++ /* Set MTU upper limit; lower limit is 68B (default value) */ net_dev->max_mtu = DPAA2_ETH_MAX_MTU; + err = dpni_set_max_frame_length(priv->mc_io, 0, priv->mc_token, -+ (u16)DPAA2_ETH_MFL); ++ DPAA2_ETH_MFL); + if (err) { + dev_err(dev, "dpni_set_max_frame_length() failed\n"); + return err; @@ -4504,7 +4726,7 @@ Signed-off-by: Biwen Li /* Set actual number of queues in the net device */ num_queues = dpaa2_eth_queue_count(priv); -@@ -2277,12 +3208,23 @@ static int netdev_init(struct net_device +@@ -2277,12 +3301,23 @@ static int netdev_init(struct net_device return err; } @@ -4534,7 +4756,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -2303,14 +3245,9 @@ static int poll_link_state(void *arg) +@@ -2303,14 +3338,9 @@ static int poll_link_state(void *arg) return 0; } @@ -4550,7 +4772,7 @@ Signed-off-by: Biwen Li struct device *dev = (struct device *)arg; struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev); struct net_device *net_dev = dev_get_drvdata(dev); -@@ -2320,18 +3257,12 @@ static irqreturn_t dpni_irq0_handler_thr +@@ -2320,18 +3350,12 @@ static irqreturn_t dpni_irq0_handler_thr DPNI_IRQ_INDEX, &status); if (unlikely(err)) { netdev_err(net_dev, "Can't get irq status (err %d)\n", err); @@ -4571,7 +4793,7 @@ Signed-off-by: Biwen Li return IRQ_HANDLED; } -@@ -2348,8 +3279,7 @@ static int setup_irqs(struct fsl_mc_devi +@@ -2348,8 +3372,7 @@ static int setup_irqs(struct fsl_mc_devi irq = ls_dev->irqs[0]; err = devm_request_threaded_irq(&ls_dev->dev, irq->msi_desc->irq, @@ -4581,7 +4803,7 @@ Signed-off-by: Biwen Li IRQF_NO_SUSPEND | IRQF_ONESHOT, dev_name(&ls_dev->dev), &ls_dev->dev); if (err < 0) { -@@ -2405,6 +3335,393 @@ static void del_ch_napi(struct dpaa2_eth +@@ -2405,6 +3428,393 @@ static void del_ch_napi(struct dpaa2_eth } } @@ -4975,7 +5197,7 @@ Signed-off-by: Biwen Li static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) { struct device *dev; -@@ -2415,7 +3732,7 @@ static int dpaa2_eth_probe(struct fsl_mc +@@ -2415,7 +3825,7 @@ static int dpaa2_eth_probe(struct fsl_mc dev = &dpni_dev->dev; /* Net device */ @@ -4984,7 +5206,7 @@ Signed-off-by: Biwen Li if (!net_dev) { dev_err(dev, "alloc_etherdev_mq() failed\n"); return -ENOMEM; -@@ -2433,7 +3750,10 @@ static int dpaa2_eth_probe(struct fsl_mc +@@ -2433,7 +3843,10 @@ static int dpaa2_eth_probe(struct fsl_mc err = fsl_mc_portal_allocate(dpni_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, &priv->mc_io); if (err) { @@ -4996,7 +5218,7 @@ Signed-off-by: Biwen Li goto err_portal_alloc; } -@@ -2456,9 +3776,6 @@ static int dpaa2_eth_probe(struct fsl_mc +@@ -2456,9 +3869,6 @@ static int dpaa2_eth_probe(struct fsl_mc if (err) goto err_bind; @@ -5006,7 +5228,7 @@ Signed-off-by: Biwen Li /* Percpu statistics */ priv->percpu_stats = alloc_percpu(*priv->percpu_stats); if (!priv->percpu_stats) { -@@ -2491,7 +3808,14 @@ static int dpaa2_eth_probe(struct fsl_mc +@@ -2491,7 +3901,14 @@ static int dpaa2_eth_probe(struct fsl_mc if (err) goto err_alloc_rings; @@ -5022,7 +5244,7 @@ Signed-off-by: Biwen Li err = setup_irqs(dpni_dev); if (err) { -@@ -2499,25 +3823,41 @@ static int dpaa2_eth_probe(struct fsl_mc +@@ -2499,25 +3916,41 @@ static int dpaa2_eth_probe(struct fsl_mc priv->poll_thread = kthread_run(poll_link_state, priv, "%s_poll_link", net_dev->name); if (IS_ERR(priv->poll_thread)) { @@ -5066,7 +5288,7 @@ Signed-off-by: Biwen Li del_ch_napi(priv); err_bind: free_dpbp(priv); -@@ -2544,8 +3884,15 @@ static int dpaa2_eth_remove(struct fsl_m +@@ -2544,8 +3977,15 @@ static int dpaa2_eth_remove(struct fsl_m net_dev = dev_get_drvdata(dev); priv = netdev_priv(net_dev); @@ -5083,7 +5305,7 @@ Signed-off-by: Biwen Li if (priv->do_link_poll) kthread_stop(priv->poll_thread); -@@ -2555,8 +3902,6 @@ static int dpaa2_eth_remove(struct fsl_m +@@ -2555,17 +3995,16 @@ static int dpaa2_eth_remove(struct fsl_m free_rings(priv); free_percpu(priv->percpu_stats); free_percpu(priv->percpu_extras); @@ -5092,8 +5314,10 @@ Signed-off-by: Biwen Li free_dpbp(priv); free_dpio(priv); free_dpni(priv); -@@ -2566,6 +3911,8 @@ static int dpaa2_eth_remove(struct fsl_m - dev_set_drvdata(dev, NULL); + + fsl_mc_portal_free(priv->mc_io); + +- dev_set_drvdata(dev, NULL); free_netdev(net_dev); + dev_dbg(net_dev->dev.parent, "Removed interface %s\n", net_dev->name); @@ -5101,7 +5325,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -2588,4 +3935,34 @@ static struct fsl_mc_driver dpaa2_eth_dr +@@ -2588,4 +4027,34 @@ static struct fsl_mc_driver dpaa2_eth_dr .match_id_table = dpaa2_eth_match_id_table }; @@ -5139,15 +5363,51 @@ Signed-off-by: Biwen Li +module_exit(dpaa2_eth_driver_exit); --- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h -@@ -33,6 +33,7 @@ +@@ -1,40 +1,15 @@ ++/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ + /* Copyright 2014-2016 Freescale Semiconductor Inc. + * Copyright 2016 NXP +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of Freescale Semiconductor nor the +- * names of its contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY +- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY +- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + #ifndef __DPAA2_ETH_H #define __DPAA2_ETH_H +#include #include #include ++#include -@@ -44,9 +45,17 @@ + #include "../../fsl-mc/include/dpaa2-io.h" + #include "../../fsl-mc/include/dpaa2-fd.h" +@@ -44,6 +19,9 @@ #include "dpni-cmd.h" #include "dpaa2-eth-trace.h" @@ -5157,59 +5417,61 @@ Signed-off-by: Biwen Li #define DPAA2_ETH_STORE_SIZE 16 -+/* We set a max threshold for how many Tx confirmations we should process -+ * on a NAPI poll call, they take less processing time. -+ */ -+#define TX_CONF_PER_NAPI_POLL 256 -+ - /* Maximum number of scatter-gather entries in an ingress frame, - * considering the maximum receive frame size is 64K - */ -@@ -60,6 +69,14 @@ +@@ -60,43 +38,59 @@ /* Convert L3 MTU to L2 MFL */ #define DPAA2_ETH_L2_MAX_FRM(mtu) ((mtu) + VLAN_ETH_HLEN) +-/* Set the taildrop threshold (in bytes) to allow the enqueue of several jumbo +- * frames in the Rx queues (length of the current frame is not +- * taken into account when making the taildrop decision) +- */ +-#define DPAA2_ETH_TAILDROP_THRESH (64 * 1024) +- +-/* Buffer quota per queue. Must be large enough such that for minimum sized +- * frames taildrop kicks in before the bpool gets depleted, so we compute +- * how many 64B frames fit inside the taildrop threshold and add a margin +- * to accommodate the buffer refill delay. +- */ +-#define DPAA2_ETH_MAX_FRAMES_PER_QUEUE (DPAA2_ETH_TAILDROP_THRESH / 64) +-#define DPAA2_ETH_NUM_BUFS (DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256) +-#define DPAA2_ETH_REFILL_THRESH DPAA2_ETH_MAX_FRAMES_PER_QUEUE +/* Maximum burst size value for Tx shaping */ +#define DPAA2_ETH_MAX_BURST_SIZE 0xF7FF + + /* Maximum number of buffers that can be acquired/released through a single + * QBMan command + */ + #define DPAA2_ETH_BUFS_PER_CMD 7 + +-/* Hardware requires alignment for ingress/egress buffer addresses +- * and ingress buffer lengths. ++/* Set the taildrop threshold to 1MB to allow the enqueue of a sufficiently ++ * large number of jumbo frames in the Rx queues (length of the current frame ++ * is not taken into account when making the taildrop decision) ++ */ ++#define DPAA2_ETH_TAILDROP_THRESH (1024 * 1024) + -+/* Maximum number of buffers that can be acquired/released through a single -+ * QBMan command ++/* Maximum number of Tx confirmation frames to be processed ++ * in a single NAPI call + */ -+#define DPAA2_ETH_BUFS_PER_CMD 7 ++#define DPAA2_ETH_TXCONF_PER_NAPI 256 + - /* Set the taildrop threshold (in bytes) to allow the enqueue of several jumbo - * frames in the Rx queues (length of the current frame is not - * taken into account when making the taildrop decision) -@@ -72,31 +89,32 @@ - * to accommodate the buffer refill delay. ++/* Buffer quota per channel. ++ * We want to keep in check number of ingress frames in flight: for small ++ * sized frames, buffer pool depletion will kick in first; for large sizes, ++ * Rx FQ taildrop threshold will ensure only a reasonable number of frames ++ * will be pending at any given time. */ - #define DPAA2_ETH_MAX_FRAMES_PER_QUEUE (DPAA2_ETH_TAILDROP_THRESH / 64) --#define DPAA2_ETH_NUM_BUFS (DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256) --#define DPAA2_ETH_REFILL_THRESH DPAA2_ETH_MAX_FRAMES_PER_QUEUE -+#define DPAA2_ETH_NUM_BUFS_PER_CH (DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256) +-#define DPAA2_ETH_RX_BUF_SIZE 2048 ++#define DPAA2_ETH_NUM_BUFS_PER_CH 1024 +#define DPAA2_ETH_REFILL_THRESH(priv) \ + ((priv)->max_bufs_per_ch - DPAA2_ETH_BUFS_PER_CMD) - --/* Maximum number of buffers that can be acquired/released through a single -- * QBMan command -- */ --#define DPAA2_ETH_BUFS_PER_CMD 7 ++ +/* Global buffer quota in case flow control is enabled */ +#define DPAA2_ETH_NUM_BUFS_FC 256 + +/* Hardware requires alignment for ingress/egress buffer addresses */ -+#define DPAA2_ETH_TX_BUF_ALIGN 64 - --/* Hardware requires alignment for ingress/egress buffer addresses -- * and ingress buffer lengths. -+/* Due to a limitation in WRIOP 1.0.0, the RX buffer data must be aligned -+ * to 256B. For newer revisions, the requirement is only for 64B alignment - */ -+#define DPAA2_ETH_RX_BUF_ALIGN_REV1 256 -+#define DPAA2_ETH_RX_BUF_ALIGN 64 -+ - #define DPAA2_ETH_RX_BUF_SIZE 2048 --#define DPAA2_ETH_TX_BUF_ALIGN 64 + #define DPAA2_ETH_TX_BUF_ALIGN 64 -#define DPAA2_ETH_RX_BUF_ALIGN 256 -#define DPAA2_ETH_NEEDED_HEADROOM(p_priv) \ - ((p_priv)->tx_data_offset + DPAA2_ETH_TX_BUF_ALIGN) @@ -5222,19 +5484,29 @@ Signed-off-by: Biwen Li - (DPAA2_ETH_RX_BUF_SIZE + \ - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + \ - DPAA2_ETH_RX_BUF_ALIGN) -+#define DPAA2_ETH_SKB_SIZE \ -+ (DPAA2_ETH_RX_BUF_SIZE + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) + -+/* PTP nominal frequency 1GHz */ -+#define DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS 1 ++#define DPAA2_ETH_RX_BUF_RAW_SIZE PAGE_SIZE ++#define DPAA2_ETH_RX_BUF_TAILROOM \ ++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) ++#define DPAA2_ETH_RX_BUF_SIZE \ ++ (DPAA2_ETH_RX_BUF_RAW_SIZE - DPAA2_ETH_RX_BUF_TAILROOM) + +/* Hardware annotation area in RX/TX buffers */ +#define DPAA2_ETH_RX_HWA_SIZE 64 +#define DPAA2_ETH_TX_HWA_SIZE 128 ++ ++/* PTP nominal frequency 1GHz */ ++#define DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS 1 ++ ++/* Due to a limitation in WRIOP 1.0.0, the RX buffer data must be aligned ++ * to 256B. For newer revisions, the requirement is only for 64B alignment ++ */ ++#define DPAA2_ETH_RX_BUF_ALIGN_REV1 256 ++#define DPAA2_ETH_RX_BUF_ALIGN 64 /* We are accommodating a skb backpointer and some S/G info * in the frame's software annotation. The hardware -@@ -104,12 +122,32 @@ +@@ -104,12 +98,32 @@ */ #define DPAA2_ETH_SWA_SIZE 64 @@ -5271,11 +5543,10 @@ Signed-off-by: Biwen Li }; /* Annotation valid bits in FD FRC */ -@@ -120,23 +158,14 @@ struct dpaa2_eth_swa { - #define DPAA2_FD_FRC_FASWOV 0x0800 +@@ -121,22 +135,14 @@ struct dpaa2_eth_swa { #define DPAA2_FD_FRC_FAICFDV 0x0400 --/* Error bits in FD CTRL */ + /* Error bits in FD CTRL */ -#define DPAA2_FD_CTRL_UFD 0x00000004 -#define DPAA2_FD_CTRL_SBE 0x00000008 -#define DPAA2_FD_CTRL_FSE 0x00000020 @@ -5294,13 +5565,14 @@ Signed-off-by: Biwen Li + FD_CTRL_FAERR) /* Annotation bits in FD CTRL */ - #define DPAA2_FD_CTRL_ASAL 0x00020000 /* ASAL = 128 */ +-#define DPAA2_FD_CTRL_ASAL 0x00020000 /* ASAL = 128 */ -#define DPAA2_FD_CTRL_PTA 0x00800000 -#define DPAA2_FD_CTRL_PTV1 0x00400000 ++#define DPAA2_FD_CTRL_ASAL 0x00020000 /* ASAL = 128B */ /* Frame annotation status */ struct dpaa2_fas { -@@ -144,7 +173,7 @@ struct dpaa2_fas { +@@ -144,7 +150,7 @@ struct dpaa2_fas { u8 ppid; __le16 ifpid; __le32 status; @@ -5309,7 +5581,7 @@ Signed-off-by: Biwen Li /* Frame annotation status word is located in the first 8 bytes * of the buffer's hardware annoatation area -@@ -152,11 +181,45 @@ struct dpaa2_fas { +@@ -152,11 +158,45 @@ struct dpaa2_fas { #define DPAA2_FAS_OFFSET 0 #define DPAA2_FAS_SIZE (sizeof(struct dpaa2_fas)) @@ -5347,7 +5619,7 @@ Signed-off-by: Biwen Li + return dpaa2_get_hwa(buf_addr, swa) + DPAA2_FAS_OFFSET; +} + -+static inline u64 *dpaa2_get_ts(void *buf_addr, bool swa) ++static inline __le64 *dpaa2_get_ts(void *buf_addr, bool swa) +{ + return dpaa2_get_hwa(buf_addr, swa) + DPAA2_TS_OFFSET; +} @@ -5359,7 +5631,7 @@ Signed-off-by: Biwen Li /* Error and status bits in the frame annotation status word */ /* Debug frame, otherwise supposed to be discarded */ -@@ -203,11 +266,6 @@ struct dpaa2_fas { +@@ -203,11 +243,6 @@ struct dpaa2_fas { DPAA2_FAS_BLE | \ DPAA2_FAS_L3CE | \ DPAA2_FAS_L4CE) @@ -5371,22 +5643,7 @@ Signed-off-by: Biwen Li /* Time in milliseconds between link state updates */ #define DPAA2_ETH_LINK_STATE_REFRESH 1000 -@@ -218,6 +276,14 @@ struct dpaa2_fas { - */ - #define DPAA2_ETH_ENQUEUE_RETRIES 10 - -+/* Tx congestion entry & exit thresholds, in number of bytes. -+ * We allow a maximum of 512KB worth of frames pending processing on the Tx -+ * queues of an interface -+ */ -+#define DPAA2_ETH_TX_CONG_ENTRY_THRESH (512 * 1024) -+#define DPAA2_ETH_TX_CONG_EXIT_THRESH \ -+ (DPAA2_ETH_TX_CONG_ENTRY_THRESH * 9 / 10) -+ - /* Driver statistics, other than those in struct rtnl_link_stats64. - * These are usually collected per-CPU and aggregated by ethtool. - */ -@@ -226,6 +292,7 @@ struct dpaa2_eth_drv_stats { +@@ -226,6 +261,7 @@ struct dpaa2_eth_drv_stats { __u64 tx_conf_bytes; __u64 tx_sg_frames; __u64 tx_sg_bytes; @@ -5394,16 +5651,7 @@ Signed-off-by: Biwen Li __u64 rx_sg_frames; __u64 rx_sg_bytes; /* Enqueues retried due to portal busy */ -@@ -236,6 +303,8 @@ struct dpaa2_eth_drv_stats { - struct dpaa2_eth_fq_stats { - /* Number of frames received on this queue */ - __u64 frames; -+ /* Number of times this queue entered congestion */ -+ __u64 congestion_entry; - }; - - /* Per-channel statistics */ -@@ -250,17 +319,23 @@ struct dpaa2_eth_ch_stats { +@@ -250,17 +286,23 @@ struct dpaa2_eth_ch_stats { __u64 pull_err; }; @@ -5431,25 +5679,31 @@ Signed-off-by: Biwen Li }; struct dpaa2_eth_priv; -@@ -269,6 +344,7 @@ struct dpaa2_eth_fq { +@@ -268,15 +310,19 @@ struct dpaa2_eth_priv; + struct dpaa2_eth_fq { u32 fqid; u32 tx_qdbin; ++ u32 tx_fqid; u16 flowid; + u8 tc; int target_cpu; ++ u32 dq_frames; ++ u32 dq_bytes; struct dpaa2_eth_channel *channel; enum dpaa2_eth_fq_type type; -@@ -276,7 +352,8 @@ struct dpaa2_eth_fq { - void (*consume)(struct dpaa2_eth_priv *, - struct dpaa2_eth_channel *, - const struct dpaa2_fd *, + +- void (*consume)(struct dpaa2_eth_priv *, +- struct dpaa2_eth_channel *, +- const struct dpaa2_fd *, - struct napi_struct *); -+ struct napi_struct *, -+ u16 queue_id); ++ void (*consume)(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ const struct dpaa2_fd *fd, ++ struct dpaa2_eth_fq *fq); struct dpaa2_eth_fq_stats stats; }; -@@ -285,24 +362,53 @@ struct dpaa2_eth_channel { +@@ -285,19 +331,29 @@ struct dpaa2_eth_channel { struct fsl_mc_device *dpcon; int dpcon_id; int ch_id; @@ -5464,11 +5718,6 @@ Signed-off-by: Biwen Li + u64 rel_buf_array[DPAA2_ETH_BUFS_PER_CMD]; + u8 rel_buf_cnt; + bool flush; -+}; -+ -+struct dpaa2_eth_cls_rule { -+ struct ethtool_rx_flow_spec fs; -+ bool in_use; }; -struct dpaa2_eth_hash_fields { @@ -5476,77 +5725,56 @@ Signed-off-by: Biwen Li u64 rxnfc_field; enum net_prot cls_prot; int cls_field; -+ int offset; int size; -+ u32 id; ++ u64 id; ++}; ++ ++struct dpaa2_eth_cls_rule { ++ struct ethtool_rx_flow_spec fs; ++ u8 in_use; }; /* Driver private data */ - struct dpaa2_eth_priv { - struct net_device *net_dev; -+ /* Standard statistics */ -+ struct rtnl_link_stats64 __percpu *percpu_stats; -+ /* Extra stats, in addition to the ones known by the kernel */ -+ struct dpaa2_eth_drv_stats __percpu *percpu_extras; -+ bool ts_tx_en; /* Tx timestamping enabled */ -+ bool ts_rx_en; /* Rx timestamping enabled */ -+ u16 tx_data_offset; -+ u16 bpid; -+ u16 tx_qdid; -+ u16 rx_buf_align; -+ struct iommu_domain *iommu_domain; -+ int max_bufs_per_ch; -+ int refill_thresh; -+ bool has_xdp_prog; -+ -+ void *cscn_mem; /* Tx congestion notifications are written here */ -+ void *cscn_unaligned; -+ dma_addr_t cscn_dma; +@@ -306,17 +362,29 @@ struct dpaa2_eth_priv { u8 num_fqs; struct dpaa2_eth_fq fq[DPAA2_ETH_MAX_QUEUES]; -@@ -311,51 +417,193 @@ struct dpaa2_eth_priv { ++ int (*enqueue)(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq, ++ struct dpaa2_fd *fd, u8 prio); + + u8 num_channels; struct dpaa2_eth_channel *channel[DPAA2_ETH_MAX_DPCONS]; ++ int max_bufs_per_ch; ++ int refill_thresh; ++ ++ bool has_xdp_prog; struct dpni_attr dpni_attrs; -- u16 tx_data_offset; -- + u16 dpni_ver_major; + u16 dpni_ver_minor; + u16 tx_data_offset; + struct fsl_mc_device *dpbp_dev; -- u16 bpid; -- struct iommu_domain *iommu_domain; + u16 bpid; + struct iommu_domain *iommu_domain; -- u16 tx_qdid; ++ bool ts_tx_en; /* Tx timestamping enabled */ ++ bool ts_rx_en; /* Rx timestamping enabled */ ++ + u16 tx_qdid; struct fsl_mc_io *mc_io; /* Cores which have an affine DPIO/DPCON. - * This is the cpu set on which Rx and Tx conf frames are processed - */ - struct cpumask dpio_cpumask; +@@ -337,13 +405,30 @@ struct dpaa2_eth_priv { -- /* Standard statistics */ -- struct rtnl_link_stats64 __percpu *percpu_stats; -- /* Extra stats, in addition to the ones known by the kernel */ -- struct dpaa2_eth_drv_stats __percpu *percpu_extras; -- - u16 mc_token; - - struct dpni_link_state link_state; - bool do_link_poll; - struct task_struct *poll_thread; - -+ /* Rx distribution (hash and flow steering) header fields -+ * supported by the driver -+ */ -+ struct dpaa2_eth_dist_fields *dist_fields; -+ u8 num_dist_fields; /* enabled ethtool hashing bits */ u64 rx_hash_fields; ++ u64 rx_cls_fields; ++ struct dpaa2_eth_cls_rule *cls_rule; ++ u8 rx_cls_enabled; +#ifdef CONFIG_FSL_DPAA2_ETH_DEBUGFS + struct dpaa2_debugfs dbg; +#endif -+ /* array of classification rules */ -+ struct dpaa2_eth_cls_rule *cls_rule; + struct dpni_tx_shaping_cfg shaping_cfg; + + u8 dcbx_mode; @@ -5555,55 +5783,26 @@ Signed-off-by: Biwen Li + bool tx_pause_frames; + + bool ceetm_en; -+}; -+ -+enum dpaa2_eth_rx_dist { -+ DPAA2_ETH_RX_DIST_HASH, -+ DPAA2_ETH_RX_DIST_FS, -+ DPAA2_ETH_RX_DIST_LEGACY }; -/* default Rx hash options, set during probing */ --#define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \ -- | RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \ -- | RXH_L4_B_2_3) -+/* Supported Rx distribution field ids */ -+#define DPAA2_ETH_DIST_ETHSRC BIT(0) -+#define DPAA2_ETH_DIST_ETHDST BIT(1) -+#define DPAA2_ETH_DIST_ETHTYPE BIT(2) -+#define DPAA2_ETH_DIST_VLAN BIT(3) -+#define DPAA2_ETH_DIST_IPSRC BIT(4) -+#define DPAA2_ETH_DIST_IPDST BIT(5) -+#define DPAA2_ETH_DIST_IPPROTO BIT(6) -+#define DPAA2_ETH_DIST_L4SRC BIT(7) -+#define DPAA2_ETH_DIST_L4DST BIT(8) -+#define DPAA2_ETH_DIST_ALL (~0U) -+ -+/* Default Rx hash key */ -+#define DPAA2_ETH_DIST_DEFAULT_HASH \ -+ (DPAA2_ETH_DIST_IPPROTO | \ -+ DPAA2_ETH_DIST_IPSRC | DPAA2_ETH_DIST_IPDST | \ -+ DPAA2_ETH_DIST_L4SRC | DPAA2_ETH_DIST_L4DST) + #define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \ + | RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \ + | RXH_L4_B_2_3) ++/* default Rx hash options, set during probing */ ++#define DPAA2_RXH_DEFAULT (RXH_L3_PROTO | RXH_IP_SRC | RXH_IP_DST | \ ++ RXH_L4_B_0_1 | RXH_L4_B_2_3) ++ #define dpaa2_eth_hash_enabled(priv) \ ((priv)->dpni_attrs.num_queues > 1) -+#define dpaa2_eth_fs_enabled(priv) \ -+ (!((priv)->dpni_attrs.options & DPNI_OPT_NO_FS)) -+ -+#define dpaa2_eth_fs_mask_enabled(priv) \ -+ ((priv)->dpni_attrs.options & DPNI_OPT_HAS_KEY_MASKING) -+ -+#define dpaa2_eth_fs_count(priv) \ -+ ((priv)->dpni_attrs.fs_entries) -+ - /* Required by struct dpni_rx_tc_dist_cfg::key_cfg_iova */ - #define DPAA2_CLASSIFIER_DMA_SIZE 256 +@@ -352,10 +437,127 @@ struct dpaa2_eth_priv { extern const struct ethtool_ops dpaa2_ethtool_ops; extern const char dpaa2_eth_drv_version[]; - --static int dpaa2_eth_queue_count(struct dpaa2_eth_priv *priv) ++extern int dpaa2_phc_index; ++ +static inline int dpaa2_eth_cmp_dpni_ver(struct dpaa2_eth_priv *priv, + u16 ver_major, u16 ver_minor) +{ @@ -5612,27 +5811,51 @@ Signed-off-by: Biwen Li + return priv->dpni_ver_major - ver_major; +} + -+#define DPNI_DIST_KEY_VER_MAJOR 7 -+#define DPNI_DIST_KEY_VER_MINOR 5 ++/* Minimum firmware version that supports a more flexible API ++ * for configuring the Rx flow hash key ++ */ ++#define DPNI_RX_DIST_KEY_VER_MAJOR 7 ++#define DPNI_RX_DIST_KEY_VER_MINOR 5 + -+static inline bool dpaa2_eth_has_legacy_dist(struct dpaa2_eth_priv *priv) -+{ -+ return (dpaa2_eth_cmp_dpni_ver(priv, DPNI_DIST_KEY_VER_MAJOR, -+ DPNI_DIST_KEY_VER_MINOR) < 0); -+} ++#define dpaa2_eth_has_legacy_dist(priv) \ ++ (dpaa2_eth_cmp_dpni_ver((priv), DPNI_RX_DIST_KEY_VER_MAJOR, \ ++ DPNI_RX_DIST_KEY_VER_MINOR) < 0) + -+/* Hardware only sees DPAA2_ETH_RX_BUF_SIZE, but the skb built around -+ * the buffer also needs space for its shared info struct, and we need -+ * to allocate enough to accommodate hardware alignment restrictions -+ */ -+static inline unsigned int dpaa2_eth_buf_raw_size(struct dpaa2_eth_priv *priv) -+{ -+ return DPAA2_ETH_SKB_SIZE + priv->rx_buf_align; -+} ++#define dpaa2_eth_fs_enabled(priv) \ ++ (!((priv)->dpni_attrs.options & DPNI_OPT_NO_FS)) + -+/* Total headroom needed by the hardware in Tx frame buffers */ -+static inline unsigned int -+dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv, struct sk_buff *skb) ++#define dpaa2_eth_fs_mask_enabled(priv) \ ++ ((priv)->dpni_attrs.options & DPNI_OPT_HAS_KEY_MASKING) ++ ++#define dpaa2_eth_fs_count(priv) \ ++ ((priv)->dpni_attrs.fs_entries) ++ ++#define dpaa2_eth_queue_count(priv) \ ++ ((priv)->num_channels) ++ ++#define dpaa2_eth_tc_count(priv) \ ++ ((priv)->dpni_attrs.num_tcs) ++ ++enum dpaa2_eth_rx_dist { ++ DPAA2_ETH_RX_DIST_HASH, ++ DPAA2_ETH_RX_DIST_CLS ++}; ++ ++/* Unique IDs for the supported Rx classification header fields */ ++#define DPAA2_ETH_DIST_ETHDST BIT(0) ++#define DPAA2_ETH_DIST_ETHSRC BIT(1) ++#define DPAA2_ETH_DIST_ETHTYPE BIT(2) ++#define DPAA2_ETH_DIST_VLAN BIT(3) ++#define DPAA2_ETH_DIST_IPSRC BIT(4) ++#define DPAA2_ETH_DIST_IPDST BIT(5) ++#define DPAA2_ETH_DIST_IPPROTO BIT(6) ++#define DPAA2_ETH_DIST_L4SRC BIT(7) ++#define DPAA2_ETH_DIST_L4DST BIT(8) ++#define DPAA2_ETH_DIST_ALL (~0U) ++ ++static inline ++unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv, ++ struct sk_buff *skb) +{ + unsigned int headroom = DPAA2_ETH_SWA_SIZE; + @@ -5641,7 +5864,8 @@ Signed-off-by: Biwen Li + */ + if (!skb) + return headroom; -+ + +-static int dpaa2_eth_queue_count(struct dpaa2_eth_priv *priv) + /* For non-linear skbs we have no headroom requirement, as we build a + * SG frame with a newly allocated SGT buffer + */ @@ -5656,24 +5880,11 @@ Signed-off-by: Biwen Li +} + +/* Extra headroom space requested to hardware, in order to make sure there's -+ * no realloc'ing in forwarding scenarios. We need to reserve enough space -+ * such that we can accommodate the maximum required Tx offset and alignment -+ * in the ingress frame buffer ++ * no realloc'ing in forwarding scenarios + */ +static inline unsigned int dpaa2_eth_rx_headroom(struct dpaa2_eth_priv *priv) +{ -+ return priv->tx_data_offset + DPAA2_ETH_TX_BUF_ALIGN - -+ DPAA2_ETH_RX_HWA_SIZE; -+} -+ -+static inline int dpaa2_eth_queue_count(struct dpaa2_eth_priv *priv) - { - return priv->dpni_attrs.num_queues; - } - -+static inline int dpaa2_eth_tc_count(struct dpaa2_eth_priv *priv) -+{ -+ return priv->dpni_attrs.num_tcs; ++ return priv->tx_data_offset - DPAA2_ETH_RX_HWA_SIZE; +} + +static inline bool dpaa2_eth_is_pfc_enabled(struct dpaa2_eth_priv *priv, @@ -5702,28 +5913,74 @@ Signed-off-by: Biwen Li +} + +static inline int dpaa2_eth_ch_count(struct dpaa2_eth_priv *priv) -+{ + { +- return priv->dpni_attrs.num_queues; + return 1; -+} -+ -+void check_cls_support(struct dpaa2_eth_priv *priv); + } + ++int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags); ++int dpaa2_eth_set_cls(struct net_device *net_dev, u64 key); ++int dpaa2_eth_cls_key_size(u64 key); ++int dpaa2_eth_cls_fld_off(int prot, int field); ++void dpaa2_eth_cls_trim_rule(void *key_mem, u64 fields); + +int set_rx_taildrop(struct dpaa2_eth_priv *priv); -+ -+int dpaa2_eth_set_dist_key(struct dpaa2_eth_priv *priv, -+ enum dpaa2_eth_rx_dist type, u32 key_fields); + #endif /* __DPAA2_H */ --- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c -@@ -1,5 +1,5 @@ +@@ -1,35 +1,10 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* Copyright 2014-2016 Freescale Semiconductor Inc. - * Copyright 2016 NXP +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of Freescale Semiconductor nor the +- * names of its contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY +- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY +- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * Copyright 2016-2017 NXP - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: -@@ -62,6 +62,7 @@ static char dpaa2_ethtool_extras[][ETH_G + */ + ++#include ++ + #include "dpni.h" /* DPNI_LINK_OPT_* */ + #include "dpaa2-eth.h" + +@@ -52,6 +27,10 @@ static char dpaa2_ethtool_stats[][ETH_GS + "[hw] rx nobuffer discards", + "[hw] tx discarded frames", + "[hw] tx confirmed frames", ++ "[hw] tx dequeued bytes", ++ "[hw] tx dequeued frames", ++ "[hw] tx rejected bytes", ++ "[hw] tx rejected frames", + }; + + #define DPAA2_ETH_NUM_STATS ARRAY_SIZE(dpaa2_ethtool_stats) +@@ -62,6 +41,7 @@ static char dpaa2_ethtool_extras[][ETH_G "[drv] tx conf bytes", "[drv] tx sg frames", "[drv] tx sg bytes", @@ -5731,31 +5988,28 @@ Signed-off-by: Biwen Li "[drv] rx sg frames", "[drv] rx sg bytes", "[drv] enqueue portal busy", -@@ -69,6 +70,15 @@ static char dpaa2_ethtool_extras[][ETH_G +@@ -69,6 +49,12 @@ static char dpaa2_ethtool_extras[][ETH_G "[drv] dequeue portal busy", "[drv] channel pull errors", "[drv] cdan", -+ "[drv] tx congestion state", -+#ifdef CONFIG_FSL_QBMAN_DEBUG + /* FQ stats */ + "rx pending frames", + "rx pending bytes", + "tx conf pending frames", + "tx conf pending bytes", + "buffer count" -+#endif }; #define DPAA2_ETH_NUM_EXTRA_STATS ARRAY_SIZE(dpaa2_ethtool_extras) -@@ -76,10 +86,15 @@ static char dpaa2_ethtool_extras[][ETH_G +@@ -76,14 +62,55 @@ static char dpaa2_ethtool_extras[][ETH_G static void dpaa2_eth_get_drvinfo(struct net_device *net_dev, struct ethtool_drvinfo *drvinfo) { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver)); - strlcpy(drvinfo->version, dpaa2_eth_drv_version, - sizeof(drvinfo->version)); +- strlcpy(drvinfo->version, dpaa2_eth_drv_version, +- sizeof(drvinfo->version)); - strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), @@ -5764,7 +6018,86 @@ Signed-off-by: Biwen Li strlcpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent), sizeof(drvinfo->bus_info)); } -@@ -113,25 +128,37 @@ out: + ++#define DPNI_LINK_AUTONEG_VER_MAJOR 7 ++#define DPNI_LINK_AUTONEG_VER_MINOR 8 ++ ++struct dpaa2_eth_link_mode_map { ++ u64 dpni_lm; ++ u64 ethtool_lm; ++}; ++ ++static const struct dpaa2_eth_link_mode_map dpaa2_eth_lm_map[] = { ++ {DPNI_ADVERTISED_10BASET_FULL, ETHTOOL_LINK_MODE_10baseT_Full_BIT}, ++ {DPNI_ADVERTISED_100BASET_FULL, ETHTOOL_LINK_MODE_100baseT_Full_BIT}, ++ {DPNI_ADVERTISED_1000BASET_FULL, ETHTOOL_LINK_MODE_1000baseT_Full_BIT}, ++ {DPNI_ADVERTISED_10000BASET_FULL, ETHTOOL_LINK_MODE_10000baseT_Full_BIT}, ++ {DPNI_ADVERTISED_2500BASEX_FULL, ETHTOOL_LINK_MODE_2500baseX_Full_BIT}, ++ {DPNI_ADVERTISED_AUTONEG, ETHTOOL_LINK_MODE_Autoneg_BIT}, ++}; ++ ++static void link_mode_dpni2ethtool(u64 dpni_lm, unsigned long *ethtool_lm) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_eth_lm_map); i++) { ++ if (dpni_lm & dpaa2_eth_lm_map[i].dpni_lm) ++ __set_bit(dpaa2_eth_lm_map[i].ethtool_lm, ethtool_lm); ++ } ++} ++ ++static void link_mode_ethtool2dpni(const unsigned long *ethtool_lm, ++ u64 *dpni_lm) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_eth_lm_map); i++) { ++ if (test_bit(dpaa2_eth_lm_map[i].ethtool_lm, ethtool_lm)) ++ *dpni_lm |= dpaa2_eth_lm_map[i].dpni_lm; ++ } ++} ++ + static int + dpaa2_eth_get_link_ksettings(struct net_device *net_dev, + struct ethtool_link_ksettings *link_settings) +@@ -92,17 +119,27 @@ dpaa2_eth_get_link_ksettings(struct net_ + int err = 0; + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + +- err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, &state); +- if (err) { +- netdev_err(net_dev, "ERROR %d getting link state\n", err); +- goto out; ++ if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_LINK_AUTONEG_VER_MAJOR, ++ DPNI_LINK_AUTONEG_VER_MINOR) < 0) { ++ err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, ++ &state); ++ if (err) { ++ netdev_err(net_dev, "dpni_get_link_state failed\n"); ++ goto out; ++ } ++ } else { ++ err = dpni_get_link_state_v2(priv->mc_io, 0, priv->mc_token, ++ &state); ++ if (err) { ++ netdev_err(net_dev, "dpni_get_link_state_v2 failed\n"); ++ goto out; ++ } ++ link_mode_dpni2ethtool(state.supported, ++ link_settings->link_modes.supported); ++ link_mode_dpni2ethtool(state.advertising, ++ link_settings->link_modes.advertising); + } + +- /* At the moment, we have no way of interrogating the DPMAC +- * from the DPNI side - and for that matter there may exist +- * no DPMAC at all. So for now we just don't report anything +- * beyond the DPNI attributes. +- */ + if (state.options & DPNI_LINK_OPT_AUTONEG) + link_settings->base.autoneg = AUTONEG_ENABLE; + if (!(state.options & DPNI_LINK_OPT_HALF_DUPLEX)) +@@ -113,25 +150,37 @@ out: return err; } @@ -5811,10 +6144,21 @@ Signed-off-by: Biwen Li cfg.rate = link_settings->base.speed; if (link_settings->base.autoneg == AUTONEG_ENABLE) cfg.options |= DPNI_LINK_OPT_AUTONEG; -@@ -149,6 +176,81 @@ dpaa2_eth_set_link_ksettings(struct net_ - */ - netdev_dbg(net_dev, "ERROR %d setting link cfg\n", err); +@@ -142,13 +191,92 @@ dpaa2_eth_set_link_ksettings(struct net_ + else + cfg.options &= ~DPNI_LINK_OPT_HALF_DUPLEX; ++ if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_LINK_AUTONEG_VER_MAJOR, ++ DPNI_LINK_AUTONEG_VER_MINOR)) { ++ err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &cfg); ++ } else { ++ link_mode_ethtool2dpni(link_settings->link_modes.advertising, ++ &cfg.advertising); ++ dpni_set_link_cfg_v2(priv->mc_io, 0, priv->mc_token, &cfg); ++ } ++ if (err) ++ netdev_err(net_dev, "dpni_set_link_cfg failed"); ++ +out: + return err; +} @@ -5874,7 +6218,7 @@ Signed-off-by: Biwen Li + else + cfg.options &= ~DPNI_LINK_OPT_ASYM_PAUSE; + -+ err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &cfg); + err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &cfg); + if (err) { + netdev_dbg(net_dev, "Error setting link\n"); + goto out; @@ -5886,44 +6230,55 @@ Signed-off-by: Biwen Li + + priv->tx_pause_frames = pause->tx_pause; + err = set_rx_taildrop(priv); -+ if (err) + if (err) +- /* ethtool will be loud enough if we return an error; no point +- * in putting our own error message on the console by default +- */ +- netdev_dbg(net_dev, "ERROR %d setting link cfg\n", err); + netdev_dbg(net_dev, "Error configuring taildrop\n"); -+ + +out: return err; } -@@ -192,6 +294,13 @@ static void dpaa2_eth_get_ethtool_stats( +@@ -192,6 +320,10 @@ static void dpaa2_eth_get_ethtool_stats( int j, k, err; int num_cnt; union dpni_statistics dpni_stats; -+ -+#ifdef CONFIG_FSL_QBMAN_DEBUG + u32 fcnt, bcnt; + u32 fcnt_rx_total = 0, fcnt_tx_total = 0; + u32 bcnt_rx_total = 0, bcnt_tx_total = 0; + u32 buf_cnt; -+#endif u64 cdan = 0; u64 portal_busy = 0, pull_err = 0; struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -@@ -204,7 +313,7 @@ static void dpaa2_eth_get_ethtool_stats( +@@ -202,9 +334,9 @@ static void dpaa2_eth_get_ethtool_stats( + sizeof(u64) * (DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS)); + /* Print standard counters, from DPNI statistics */ - for (j = 0; j <= 2; j++) { +- for (j = 0; j <= 2; j++) { ++ for (j = 0; j <= 3; j++) { err = dpni_get_statistics(priv->mc_io, 0, priv->mc_token, - j, &dpni_stats); + j, 0, &dpni_stats); if (err != 0) netdev_warn(net_dev, "dpni_get_stats(%d) failed\n", j); switch (j) { -@@ -240,12 +349,474 @@ static void dpaa2_eth_get_ethtool_stats( +@@ -217,6 +349,9 @@ static void dpaa2_eth_get_ethtool_stats( + case 2: + num_cnt = sizeof(dpni_stats.page_2) / sizeof(u64); + break; ++ case 3: ++ num_cnt = sizeof(dpni_stats.page_3) / sizeof(u64); ++ break; + } + for (k = 0; k < num_cnt; k++) + *(data + i++) = dpni_stats.raw.counter[k]; +@@ -240,12 +375,410 @@ static void dpaa2_eth_get_ethtool_stats( *(data + i++) = portal_busy; *(data + i++) = pull_err; *(data + i++) = cdan; + -+ *(data + i++) = dpaa2_cscn_state_congested(priv->cscn_mem); -+ -+#ifdef CONFIG_FSL_QBMAN_DEBUG + for (j = 0; j < priv->num_fqs; j++) { + /* Print FQ instantaneous counts */ + err = dpaa2_io_query_fq_count(NULL, priv->fq[j].fqid, @@ -5953,279 +6308,221 @@ Signed-off-by: Biwen Li + return; + } + *(data + i++) = buf_cnt; -+#endif +} + -+static int cls_key_off(struct dpaa2_eth_priv *priv, int prot, int field) ++static int prep_eth_rule(struct ethhdr *eth_value, struct ethhdr *eth_mask, ++ void *key, void *mask, u64 *fields) +{ -+ int i, off = 0; ++ int off; + -+ for (i = 0; i < priv->num_dist_fields; i++) { -+ if (priv->dist_fields[i].cls_prot == prot && -+ priv->dist_fields[i].cls_field == field) -+ return off; -+ off += priv->dist_fields[i].size; ++ if (eth_mask->h_proto) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_ETH, NH_FLD_ETH_TYPE); ++ *(__be16 *)(key + off) = eth_value->h_proto; ++ *(__be16 *)(mask + off) = eth_mask->h_proto; ++ *fields |= DPAA2_ETH_DIST_ETHTYPE; + } + -+ return -1; -+} -+ -+static u8 cls_key_size(struct dpaa2_eth_priv *priv) -+{ -+ u8 i, size = 0; -+ -+ for (i = 0; i < priv->num_dist_fields; i++) -+ size += priv->dist_fields[i].size; -+ -+ return size; -+} -+ -+void check_cls_support(struct dpaa2_eth_priv *priv) -+{ -+ u8 key_size = cls_key_size(priv); -+ struct device *dev = priv->net_dev->dev.parent; -+ -+ if (dpaa2_eth_hash_enabled(priv)) { -+ if (priv->dpni_attrs.fs_key_size < key_size) { -+ dev_info(dev, "max_dist_key_size = %d, expected %d. Hashing and steering are disabled\n", -+ priv->dpni_attrs.fs_key_size, -+ key_size); -+ goto disable_fs; -+ } -+ if (priv->num_dist_fields > DPKG_MAX_NUM_OF_EXTRACTS) { -+ dev_info(dev, "Too many key fields (max = %d). Hashing and steering are disabled\n", -+ DPKG_MAX_NUM_OF_EXTRACTS); -+ goto disable_fs; -+ } ++ if (!is_zero_ether_addr(eth_mask->h_source)) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_ETH, NH_FLD_ETH_SA); ++ ether_addr_copy(key + off, eth_value->h_source); ++ ether_addr_copy(mask + off, eth_mask->h_source); ++ *fields |= DPAA2_ETH_DIST_ETHSRC; + } + -+ if (dpaa2_eth_fs_enabled(priv)) { -+ if (!dpaa2_eth_hash_enabled(priv)) { -+ dev_info(dev, "Insufficient queues. Steering is disabled\n"); -+ goto disable_fs; -+ } -+ -+ if (!dpaa2_eth_fs_mask_enabled(priv)) { -+ dev_info(dev, "Key masks not supported. Steering is disabled\n"); -+ goto disable_fs; -+ } ++ if (!is_zero_ether_addr(eth_mask->h_dest)) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_ETH, NH_FLD_ETH_DA); ++ ether_addr_copy(key + off, eth_value->h_dest); ++ ether_addr_copy(mask + off, eth_mask->h_dest); ++ *fields |= DPAA2_ETH_DIST_ETHDST; + } + -+ return; -+ -+disable_fs: -+ priv->dpni_attrs.options |= DPNI_OPT_NO_FS; -+ priv->dpni_attrs.options &= ~DPNI_OPT_HAS_KEY_MASKING; ++ return 0; +} + -+static int prep_l4_rule(struct dpaa2_eth_priv *priv, -+ struct ethtool_tcpip4_spec *l4_value, -+ struct ethtool_tcpip4_spec *l4_mask, -+ void *key, void *mask, u8 l4_proto) ++static int prep_user_ip_rule(struct ethtool_usrip4_spec *uip_value, ++ struct ethtool_usrip4_spec *uip_mask, ++ void *key, void *mask, u64 *fields) +{ -+ int offset; ++ int off; ++ u32 tmp_value, tmp_mask; + -+ if (l4_mask->tos) { -+ netdev_err(priv->net_dev, "ToS is not supported for IPv4 L4\n"); ++ if (uip_mask->tos || uip_mask->ip_ver) + return -EOPNOTSUPP; -+ } -+ -+ if (l4_mask->ip4src) { -+ offset = cls_key_off(priv, NET_PROT_IP, NH_FLD_IP_SRC); -+ *(u32 *)(key + offset) = l4_value->ip4src; -+ *(u32 *)(mask + offset) = l4_mask->ip4src; -+ } + -+ if (l4_mask->ip4dst) { -+ offset = cls_key_off(priv, NET_PROT_IP, NH_FLD_IP_DST); -+ *(u32 *)(key + offset) = l4_value->ip4dst; -+ *(u32 *)(mask + offset) = l4_mask->ip4dst; ++ if (uip_mask->ip4src) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_IP, NH_FLD_IP_SRC); ++ *(__be32 *)(key + off) = uip_value->ip4src; ++ *(__be32 *)(mask + off) = uip_mask->ip4src; ++ *fields |= DPAA2_ETH_DIST_IPSRC; + } + -+ if (l4_mask->psrc) { -+ offset = cls_key_off(priv, NET_PROT_UDP, NH_FLD_UDP_PORT_SRC); -+ *(u32 *)(key + offset) = l4_value->psrc; -+ *(u32 *)(mask + offset) = l4_mask->psrc; ++ if (uip_mask->ip4dst) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_IP, NH_FLD_IP_DST); ++ *(__be32 *)(key + off) = uip_value->ip4dst; ++ *(__be32 *)(mask + off) = uip_mask->ip4dst; ++ *fields |= DPAA2_ETH_DIST_IPDST; + } + -+ if (l4_mask->pdst) { -+ offset = cls_key_off(priv, NET_PROT_UDP, NH_FLD_UDP_PORT_DST); -+ *(u32 *)(key + offset) = l4_value->pdst; -+ *(u32 *)(mask + offset) = l4_mask->pdst; ++ if (uip_mask->proto) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_IP, NH_FLD_IP_PROTO); ++ *(u8 *)(key + off) = uip_value->proto; ++ *(u8 *)(mask + off) = uip_mask->proto; ++ *fields |= DPAA2_ETH_DIST_IPPROTO; + } + -+ /* Only apply the rule for the user-specified L4 protocol -+ * and if ethertype matches IPv4 -+ */ -+ offset = cls_key_off(priv, NET_PROT_ETH, NH_FLD_ETH_TYPE); -+ *(u16 *)(key + offset) = htons(ETH_P_IP); -+ *(u16 *)(mask + offset) = 0xFFFF; -+ -+ offset = cls_key_off(priv, NET_PROT_IP, NH_FLD_IP_PROTO); -+ *(u8 *)(key + offset) = l4_proto; -+ *(u8 *)(mask + offset) = 0xFF; -+ -+ /* TODO: check IP version */ -+ -+ return 0; -+} -+ -+static int prep_eth_rule(struct dpaa2_eth_priv *priv, -+ struct ethhdr *eth_value, struct ethhdr *eth_mask, -+ void *key, void *mask) -+{ -+ int offset; ++ if (uip_mask->l4_4_bytes) { ++ tmp_value = be32_to_cpu(uip_value->l4_4_bytes); ++ tmp_mask = be32_to_cpu(uip_mask->l4_4_bytes); + -+ if (eth_mask->h_proto) { -+ netdev_err(priv->net_dev, "Ethertype is not supported!\n"); -+ return -EOPNOTSUPP; -+ } ++ off = dpaa2_eth_cls_fld_off(NET_PROT_UDP, NH_FLD_UDP_PORT_SRC); ++ *(__be16 *)(key + off) = htons(tmp_value >> 16); ++ *(__be16 *)(mask + off) = htons(tmp_mask >> 16); ++ *fields |= DPAA2_ETH_DIST_L4SRC; + -+ if (!is_zero_ether_addr(eth_mask->h_source)) { -+ offset = cls_key_off(priv, NET_PROT_ETH, NH_FLD_ETH_SA); -+ ether_addr_copy(key + offset, eth_value->h_source); -+ ether_addr_copy(mask + offset, eth_mask->h_source); ++ off = dpaa2_eth_cls_fld_off(NET_PROT_UDP, NH_FLD_UDP_PORT_DST); ++ *(__be16 *)(key + off) = htons(tmp_value & 0xFFFF); ++ *(__be16 *)(mask + off) = htons(tmp_mask & 0xFFFF); ++ *fields |= DPAA2_ETH_DIST_L4DST; + } + -+ if (!is_zero_ether_addr(eth_mask->h_dest)) { -+ offset = cls_key_off(priv, NET_PROT_ETH, NH_FLD_ETH_DA); -+ ether_addr_copy(key + offset, eth_value->h_dest); -+ ether_addr_copy(mask + offset, eth_mask->h_dest); -+ } ++ /* Only apply the rule for IPv4 frames */ ++ off = dpaa2_eth_cls_fld_off(NET_PROT_ETH, NH_FLD_ETH_TYPE); ++ *(__be16 *)(key + off) = htons(ETH_P_IP); ++ *(__be16 *)(mask + off) = htons(0xFFFF); ++ *fields |= DPAA2_ETH_DIST_ETHTYPE; + + return 0; +} + -+static int prep_user_ip_rule(struct dpaa2_eth_priv *priv, -+ struct ethtool_usrip4_spec *uip_value, -+ struct ethtool_usrip4_spec *uip_mask, -+ void *key, void *mask) ++static int prep_l4_rule(struct ethtool_tcpip4_spec *l4_value, ++ struct ethtool_tcpip4_spec *l4_mask, ++ void *key, void *mask, u8 l4_proto, u64 *fields) +{ -+ int offset; ++ int off; + -+ if (uip_mask->tos) ++ if (l4_mask->tos) + return -EOPNOTSUPP; -+ -+ if (uip_mask->ip4src) { -+ offset = cls_key_off(priv, NET_PROT_IP, NH_FLD_IP_SRC); -+ *(u32 *)(key + offset) = uip_value->ip4src; -+ *(u32 *)(mask + offset) = uip_mask->ip4src; ++ if (l4_mask->ip4src) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_IP, NH_FLD_IP_SRC); ++ *(__be32 *)(key + off) = l4_value->ip4src; ++ *(__be32 *)(mask + off) = l4_mask->ip4src; ++ *fields |= DPAA2_ETH_DIST_IPSRC; + } + -+ if (uip_mask->ip4dst) { -+ offset = cls_key_off(priv, NET_PROT_IP, NH_FLD_IP_DST); -+ *(u32 *)(key + offset) = uip_value->ip4dst; -+ *(u32 *)(mask + offset) = uip_mask->ip4dst; ++ if (l4_mask->ip4dst) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_IP, NH_FLD_IP_DST); ++ *(__be32 *)(key + off) = l4_value->ip4dst; ++ *(__be32 *)(mask + off) = l4_mask->ip4dst; ++ *fields |= DPAA2_ETH_DIST_IPDST; + } + -+ if (uip_mask->proto) { -+ offset = cls_key_off(priv, NET_PROT_IP, NH_FLD_IP_PROTO); -+ *(u32 *)(key + offset) = uip_value->proto; -+ *(u32 *)(mask + offset) = uip_mask->proto; ++ if (l4_mask->psrc) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_UDP, NH_FLD_UDP_PORT_SRC); ++ *(__be16 *)(key + off) = l4_value->psrc; ++ *(__be16 *)(mask + off) = l4_mask->psrc; ++ *fields |= DPAA2_ETH_DIST_L4SRC; + } -+ if (uip_mask->l4_4_bytes) { -+ offset = cls_key_off(priv, NET_PROT_UDP, NH_FLD_UDP_PORT_SRC); -+ *(u16 *)(key + offset) = uip_value->l4_4_bytes << 16; -+ *(u16 *)(mask + offset) = uip_mask->l4_4_bytes << 16; + -+ offset = cls_key_off(priv, NET_PROT_UDP, NH_FLD_UDP_PORT_DST); -+ *(u16 *)(key + offset) = uip_value->l4_4_bytes & 0xFFFF; -+ *(u16 *)(mask + offset) = uip_mask->l4_4_bytes & 0xFFFF; ++ if (l4_mask->pdst) { ++ off = dpaa2_eth_cls_fld_off(NET_PROT_UDP, NH_FLD_UDP_PORT_DST); ++ *(__be16 *)(key + off) = l4_value->pdst; ++ *(__be16 *)(mask + off) = l4_mask->pdst; ++ *fields |= DPAA2_ETH_DIST_L4DST; + } + -+ /* Ethertype must be IP */ -+ offset = cls_key_off(priv, NET_PROT_ETH, NH_FLD_ETH_TYPE); -+ *(u16 *)(key + offset) = htons(ETH_P_IP); -+ *(u16 *)(mask + offset) = 0xFFFF; ++ /* Only apply the rule for the user-specified L4 protocol ++ * and if ethertype matches IPv4 ++ */ ++ off = dpaa2_eth_cls_fld_off(NET_PROT_ETH, NH_FLD_ETH_TYPE); ++ *(__be16 *)(key + off) = htons(ETH_P_IP); ++ *(__be16 *)(mask + off) = htons(0xFFFF); ++ *fields |= DPAA2_ETH_DIST_ETHTYPE; ++ ++ off = dpaa2_eth_cls_fld_off(NET_PROT_IP, NH_FLD_IP_PROTO); ++ *(u8 *)(key + off) = l4_proto; ++ *(u8 *)(mask + off) = 0xFF; ++ *fields |= DPAA2_ETH_DIST_IPPROTO; + + return 0; +} + -+static int prep_ext_rule(struct dpaa2_eth_priv *priv, -+ struct ethtool_flow_ext *ext_value, ++static int prep_ext_rule(struct ethtool_flow_ext *ext_value, + struct ethtool_flow_ext *ext_mask, -+ void *key, void *mask) ++ void *key, void *mask, u64 *fields) +{ -+ int offset; ++ int off; + + if (ext_mask->vlan_etype) + return -EOPNOTSUPP; + + if (ext_mask->vlan_tci) { -+ offset = cls_key_off(priv, NET_PROT_VLAN, NH_FLD_VLAN_TCI); -+ *(u16 *)(key + offset) = ext_value->vlan_tci; -+ *(u16 *)(mask + offset) = ext_mask->vlan_tci; ++ off = dpaa2_eth_cls_fld_off(NET_PROT_VLAN, NH_FLD_VLAN_TCI); ++ *(__be16 *)(key + off) = ext_value->vlan_tci; ++ *(__be16 *)(mask + off) = ext_mask->vlan_tci; ++ *fields |= DPAA2_ETH_DIST_VLAN; + } + + return 0; +} + -+static int prep_mac_ext_rule(struct dpaa2_eth_priv *priv, -+ struct ethtool_flow_ext *ext_value, ++static int prep_mac_ext_rule(struct ethtool_flow_ext *ext_value, + struct ethtool_flow_ext *ext_mask, -+ void *key, void *mask) ++ void *key, void *mask, u64 *fields) +{ -+ int offset; ++ int off; + + if (!is_zero_ether_addr(ext_mask->h_dest)) { -+ offset = cls_key_off(priv, NET_PROT_ETH, NH_FLD_ETH_DA); -+ ether_addr_copy(key + offset, ext_value->h_dest); -+ ether_addr_copy(mask + offset, ext_mask->h_dest); ++ off = dpaa2_eth_cls_fld_off(NET_PROT_ETH, NH_FLD_ETH_DA); ++ ether_addr_copy(key + off, ext_value->h_dest); ++ ether_addr_copy(mask + off, ext_mask->h_dest); ++ *fields |= DPAA2_ETH_DIST_ETHDST; + } + + return 0; +} + -+static int prep_cls_rule(struct net_device *net_dev, -+ struct ethtool_rx_flow_spec *fs, -+ void *key) ++static int prep_cls_rule(struct ethtool_rx_flow_spec *fs, void *key, void *mask, ++ u64 *fields) +{ -+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -+ const u8 key_size = cls_key_size(priv); -+ void *msk = key + key_size; + int err; + -+ memset(key, 0, key_size * 2); -+ -+ switch (fs->flow_type & 0xff) { ++ switch (fs->flow_type & 0xFF) { ++ case ETHER_FLOW: ++ err = prep_eth_rule(&fs->h_u.ether_spec, &fs->m_u.ether_spec, ++ key, mask, fields); ++ break; ++ case IP_USER_FLOW: ++ err = prep_user_ip_rule(&fs->h_u.usr_ip4_spec, ++ &fs->m_u.usr_ip4_spec, key, mask, fields); ++ break; + case TCP_V4_FLOW: -+ err = prep_l4_rule(priv, &fs->h_u.tcp_ip4_spec, -+ &fs->m_u.tcp_ip4_spec, key, msk, -+ IPPROTO_TCP); ++ err = prep_l4_rule(&fs->h_u.tcp_ip4_spec, &fs->m_u.tcp_ip4_spec, ++ key, mask, IPPROTO_TCP, fields); + break; + case UDP_V4_FLOW: -+ err = prep_l4_rule(priv, &fs->h_u.udp_ip4_spec, -+ &fs->m_u.udp_ip4_spec, key, msk, -+ IPPROTO_UDP); ++ err = prep_l4_rule(&fs->h_u.udp_ip4_spec, &fs->m_u.udp_ip4_spec, ++ key, mask, IPPROTO_UDP, fields); + break; + case SCTP_V4_FLOW: -+ err = prep_l4_rule(priv, &fs->h_u.sctp_ip4_spec, -+ &fs->m_u.sctp_ip4_spec, key, msk, -+ IPPROTO_SCTP); -+ break; -+ case ETHER_FLOW: -+ err = prep_eth_rule(priv, &fs->h_u.ether_spec, -+ &fs->m_u.ether_spec, key, msk); -+ break; -+ case IP_USER_FLOW: -+ err = prep_user_ip_rule(priv, &fs->h_u.usr_ip4_spec, -+ &fs->m_u.usr_ip4_spec, key, msk); ++ err = prep_l4_rule(&fs->h_u.sctp_ip4_spec, &fs->m_u.sctp_ip4_spec, ++ key, mask, IPPROTO_SCTP, fields); + break; + default: -+ /* TODO: AH, ESP */ + return -EOPNOTSUPP; + } ++ + if (err) + return err; + + if (fs->flow_type & FLOW_EXT) { -+ err = prep_ext_rule(priv, &fs->h_ext, &fs->m_ext, key, msk); ++ err = prep_ext_rule(&fs->h_ext, &fs->m_ext, key, mask, fields); + if (err) + return err; + } + + if (fs->flow_type & FLOW_MAC_EXT) { -+ err = prep_mac_ext_rule(priv, &fs->h_ext, &fs->m_ext, key, msk); ++ err = prep_mac_ext_rule(&fs->h_ext, &fs->m_ext, key, mask, ++ fields); + if (err) + return err; + } @@ -6233,185 +6530,179 @@ Signed-off-by: Biwen Li + return 0; +} + -+static int del_cls(struct net_device *net_dev, int location); -+ -+static int do_cls(struct net_device *net_dev, -+ struct ethtool_rx_flow_spec *fs, -+ bool add) ++static int do_cls_rule(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *fs, ++ bool add) +{ + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + struct device *dev = net_dev->dev.parent; -+ const int rule_cnt = dpaa2_eth_fs_count(priv); -+ struct dpni_rule_cfg rule_cfg; ++ struct dpni_rule_cfg rule_cfg = { 0 }; + struct dpni_fs_action_cfg fs_act = { 0 }; -+ void *dma_mem; -+ int err = 0, tc; -+ -+ if (!dpaa2_eth_fs_enabled(priv)) { -+ netdev_err(net_dev, "dev does not support steering!\n"); -+ /* dev doesn't support steering */ -+ return -EOPNOTSUPP; -+ } ++ dma_addr_t key_iova; ++ u64 fields = 0; ++ void *key_buf; ++ int i, err = 0; + -+ if ((fs->ring_cookie != RX_CLS_FLOW_DISC && -+ fs->ring_cookie >= dpaa2_eth_queue_count(priv)) || -+ fs->location >= rule_cnt) ++ if (fs->ring_cookie != RX_CLS_FLOW_DISC && ++ fs->ring_cookie >= dpaa2_eth_queue_count(priv)) + return -EINVAL; + -+ /* When adding a new rule, check if location if available -+ * and if not, free the existing table entry before inserting -+ * the new one -+ */ -+ if (add && (priv->cls_rule[fs->location].in_use == true)) -+ del_cls(net_dev, fs->location); -+ -+ memset(&rule_cfg, 0, sizeof(rule_cfg)); -+ rule_cfg.key_size = cls_key_size(priv); ++ rule_cfg.key_size = dpaa2_eth_cls_key_size(DPAA2_ETH_DIST_ALL); + + /* allocate twice the key size, for the actual key and for mask */ -+ dma_mem = kzalloc(rule_cfg.key_size * 2, GFP_DMA | GFP_KERNEL); -+ if (!dma_mem) ++ key_buf = kzalloc(rule_cfg.key_size * 2, GFP_KERNEL); ++ if (!key_buf) + return -ENOMEM; + -+ err = prep_cls_rule(net_dev, fs, dma_mem); ++ /* Fill the key and mask memory areas */ ++ err = prep_cls_rule(fs, key_buf, key_buf + rule_cfg.key_size, &fields); + if (err) -+ goto err_free_mem; ++ goto free_mem; ++ ++ if (!dpaa2_eth_fs_mask_enabled(priv)) { ++ /* Masking allows us to configure a maximal key during init and ++ * use it for all flow steering rules. Without it, we include ++ * in the key only the fields actually used, so we need to ++ * extract the others from the final key buffer. ++ * ++ * Program the FS key if needed, or return error if previously ++ * set key can't be used for the current rule. User needs to ++ * delete existing rules in this case to allow for the new one. ++ */ ++ if (!priv->rx_cls_fields) { ++ err = dpaa2_eth_set_cls(net_dev, fields); ++ if (err) ++ goto free_mem; ++ ++ priv->rx_cls_fields = fields; ++ } else if (priv->rx_cls_fields != fields) { ++ netdev_err(net_dev, "No support for multiple FS keys, need to delete existing rules\n"); ++ err = -EOPNOTSUPP; ++ goto free_mem; ++ } + -+ rule_cfg.key_iova = dma_map_single(dev, dma_mem, -+ rule_cfg.key_size * 2, -+ DMA_TO_DEVICE); ++ dpaa2_eth_cls_trim_rule(key_buf, fields); ++ rule_cfg.key_size = dpaa2_eth_cls_key_size(fields); ++ } + -+ rule_cfg.mask_iova = rule_cfg.key_iova + rule_cfg.key_size; ++ key_iova = dma_map_single(dev, key_buf, rule_cfg.key_size * 2, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(dev, key_iova)) { ++ err = -ENOMEM; ++ goto free_mem; ++ } + -+ if (fs->ring_cookie == RX_CLS_FLOW_DISC) -+ fs_act.options |= DPNI_FS_OPT_DISCARD; -+ else -+ fs_act.flow_id = fs->ring_cookie; ++ rule_cfg.key_iova = key_iova; ++ if (dpaa2_eth_fs_mask_enabled(priv)) ++ rule_cfg.mask_iova = key_iova + rule_cfg.key_size; + -+ for (tc = 0; tc < dpaa2_eth_tc_count(priv); tc++) { ++ if (add) { ++ if (fs->ring_cookie == RX_CLS_FLOW_DISC) ++ fs_act.options |= DPNI_FS_OPT_DISCARD; ++ else ++ fs_act.flow_id = fs->ring_cookie; ++ } ++ for (i = 0; i < dpaa2_eth_tc_count(priv); i++) { + if (add) + err = dpni_add_fs_entry(priv->mc_io, 0, priv->mc_token, -+ tc, fs->location, &rule_cfg, ++ i, fs->location, &rule_cfg, + &fs_act); + else + err = dpni_remove_fs_entry(priv->mc_io, 0, -+ priv->mc_token, tc, ++ priv->mc_token, i, + &rule_cfg); -+ + if (err) + break; + } + -+ dma_unmap_single(dev, rule_cfg.key_iova, -+ rule_cfg.key_size * 2, DMA_TO_DEVICE); ++ dma_unmap_single(dev, key_iova, rule_cfg.key_size * 2, DMA_TO_DEVICE); + -+ if (err) -+ netdev_err(net_dev, "dpaa2_add/remove_cls() error %d\n", err); -+ -+err_free_mem: -+ kfree(dma_mem); ++free_mem: ++ kfree(key_buf); + + return err; +} + -+static int add_cls(struct net_device *net_dev, -+ struct ethtool_rx_flow_spec *fs) ++static int num_rules(struct dpaa2_eth_priv *priv) +{ -+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -+ int err; -+ -+ err = do_cls(net_dev, fs, true); -+ if (err) -+ return err; ++ int i, rules = 0; + -+ priv->cls_rule[fs->location].in_use = true; -+ priv->cls_rule[fs->location].fs = *fs; ++ for (i = 0; i < dpaa2_eth_fs_count(priv); i++) ++ if (priv->cls_rule[i].in_use) ++ rules++; + -+ return 0; ++ return rules; +} + -+static int del_cls(struct net_device *net_dev, int location) ++static int update_cls_rule(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *new_fs, ++ int location) +{ + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -+ int err; ++ struct dpaa2_eth_cls_rule *rule; ++ int err = -EINVAL; + -+ err = do_cls(net_dev, &priv->cls_rule[location].fs, false); -+ if (err) -+ return err; ++ if (!priv->rx_cls_enabled) ++ return -EOPNOTSUPP; + -+ priv->cls_rule[location].in_use = false; ++ if (location >= dpaa2_eth_fs_count(priv)) ++ return -EINVAL; + -+ return 0; -+} ++ rule = &priv->cls_rule[location]; + -+static int set_hash(struct net_device *net_dev, u64 data) -+{ -+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -+ u32 key = 0; -+ int i; ++ /* If a rule is present at the specified location, delete it. */ ++ if (rule->in_use) { ++ err = do_cls_rule(net_dev, &rule->fs, false); ++ if (err) ++ return err; + -+ if (data & RXH_DISCARD) -+ return -EOPNOTSUPP; ++ rule->in_use = 0; + -+ for (i = 0; i < priv->num_dist_fields; i++) -+ if (priv->dist_fields[i].rxnfc_field & data) -+ key |= priv->dist_fields[i].id; ++ if (!dpaa2_eth_fs_mask_enabled(priv) && !num_rules(priv)) ++ priv->rx_cls_fields = 0; ++ } + -+ return dpaa2_eth_set_dist_key(priv, DPAA2_ETH_RX_DIST_HASH, key); -+} ++ /* If no new entry to add, return here */ ++ if (!new_fs) ++ return err; + -+static int dpaa2_eth_set_rxnfc(struct net_device *net_dev, -+ struct ethtool_rxnfc *rxnfc) -+{ -+ int err = 0; ++ err = do_cls_rule(net_dev, new_fs, true); ++ if (err) ++ return err; + -+ switch (rxnfc->cmd) { -+ case ETHTOOL_SRXCLSRLINS: -+ err = add_cls(net_dev, &rxnfc->fs); -+ break; -+ case ETHTOOL_SRXCLSRLDEL: -+ err = del_cls(net_dev, rxnfc->fs.location); -+ break; -+ case ETHTOOL_SRXFH: -+ err = set_hash(net_dev, rxnfc->data); -+ break; -+ default: -+ err = -EOPNOTSUPP; -+ } ++ rule->in_use = 1; ++ rule->fs = *new_fs; + -+ return err; ++ return 0; } static int dpaa2_eth_get_rxnfc(struct net_device *net_dev, struct ethtool_rxnfc *rxnfc, u32 *rule_locs) { struct dpaa2_eth_priv *priv = netdev_priv(net_dev); -+ const int rule_cnt = dpaa2_eth_fs_count(priv); -+ int i, j; ++ int rule_cnt = dpaa2_eth_fs_count(priv); ++ int i, j = 0; switch (rxnfc->cmd) { case ETHTOOL_GRXFH: -@@ -258,6 +829,33 @@ static int dpaa2_eth_get_rxnfc(struct ne +@@ -258,6 +791,29 @@ static int dpaa2_eth_get_rxnfc(struct ne case ETHTOOL_GRXRINGS: rxnfc->data = dpaa2_eth_queue_count(priv); break; -+ + case ETHTOOL_GRXCLSRLCNT: -+ for (i = 0, rxnfc->rule_cnt = 0; i < rule_cnt; i++) -+ if (priv->cls_rule[i].in_use) -+ rxnfc->rule_cnt++; ++ rxnfc->rule_cnt = 0; ++ rxnfc->rule_cnt = num_rules(priv); + rxnfc->data = rule_cnt; + break; -+ + case ETHTOOL_GRXCLSRULE: ++ if (rxnfc->fs.location >= rule_cnt) ++ return -EINVAL; + if (!priv->cls_rule[rxnfc->fs.location].in_use) + return -EINVAL; -+ + rxnfc->fs = priv->cls_rule[rxnfc->fs.location].fs; + break; -+ + case ETHTOOL_GRXCLSRLALL: -+ for (i = 0, j = 0; i < rule_cnt; i++) { ++ for (i = 0; i < rule_cnt; i++) { + if (!priv->cls_rule[i].in_use) + continue; + if (j == rxnfc->rule_cnt) @@ -6421,11 +6712,59 @@ Signed-off-by: Biwen Li + rxnfc->rule_cnt = j; + rxnfc->data = rule_cnt; + break; + default: + return -EOPNOTSUPP; + } +@@ -265,13 +821,61 @@ static int dpaa2_eth_get_rxnfc(struct ne + return 0; + } + ++int dpaa2_phc_index = -1; ++EXPORT_SYMBOL(dpaa2_phc_index); ++ ++static int dpaa2_eth_get_ts_info(struct net_device *dev, ++ struct ethtool_ts_info *info) ++{ ++ info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE | ++ SOF_TIMESTAMPING_RX_HARDWARE | ++ SOF_TIMESTAMPING_RAW_HARDWARE; ++ ++ info->phc_index = dpaa2_phc_index; ++ ++ info->tx_types = (1 << HWTSTAMP_TX_OFF) | ++ (1 << HWTSTAMP_TX_ON); ++ ++ info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | ++ (1 << HWTSTAMP_FILTER_ALL); ++ return 0; ++} ++ ++static int dpaa2_eth_set_rxnfc(struct net_device *net_dev, ++ struct ethtool_rxnfc *rxnfc) ++{ ++ int err = 0; ++ ++ switch (rxnfc->cmd) { ++ case ETHTOOL_SRXFH: ++ if ((rxnfc->data & DPAA2_RXH_SUPPORTED) != rxnfc->data) ++ return -EOPNOTSUPP; ++ err = dpaa2_eth_set_hash(net_dev, rxnfc->data); ++ break; ++ case ETHTOOL_SRXCLSRLINS: ++ err = update_cls_rule(net_dev, &rxnfc->fs, rxnfc->fs.location); ++ break; ++ case ETHTOOL_SRXCLSRLDEL: ++ err = update_cls_rule(net_dev, NULL, rxnfc->fs.location); ++ break; ++ default: ++ err = -EOPNOTSUPP; ++ } + - default: - return -EOPNOTSUPP; - } -@@ -270,8 +868,11 @@ const struct ethtool_ops dpaa2_ethtool_o ++ return err; ++} ++ + const struct ethtool_ops dpaa2_ethtool_ops = { + .get_drvinfo = dpaa2_eth_get_drvinfo, .get_link = ethtool_op_get_link, .get_link_ksettings = dpaa2_eth_get_link_ksettings, .set_link_ksettings = dpaa2_eth_set_link_ksettings, @@ -6436,10 +6775,446 @@ Signed-off-by: Biwen Li .get_strings = dpaa2_eth_get_strings, .get_rxnfc = dpaa2_eth_get_rxnfc, + .set_rxnfc = dpaa2_eth_set_rxnfc, ++ .get_ts_info = dpaa2_eth_get_ts_info, + }; +--- a/drivers/staging/fsl-dpaa2/ethernet/dpkg.h ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpkg.h +@@ -1,39 +1,10 @@ ++/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ + /* Copyright 2013-2015 Freescale Semiconductor Inc. +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of the above-listed copyright holders nor the +- * names of any contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE +- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +- * POSSIBILITY OF SUCH DAMAGE. + */ + #ifndef __FSL_DPKG_H_ + #define __FSL_DPKG_H_ + + #include +-#include "net.h" + + /* Data Path Key Generator API + * Contains initialization APIs and runtime APIs for the Key Generator +@@ -86,6 +57,355 @@ struct dpkg_mask { + u8 offset; }; + ++/* Protocol fields */ ++ ++/* Ethernet fields */ ++#define NH_FLD_ETH_DA BIT(0) ++#define NH_FLD_ETH_SA BIT(1) ++#define NH_FLD_ETH_LENGTH BIT(2) ++#define NH_FLD_ETH_TYPE BIT(3) ++#define NH_FLD_ETH_FINAL_CKSUM BIT(4) ++#define NH_FLD_ETH_PADDING BIT(5) ++#define NH_FLD_ETH_ALL_FIELDS (BIT(6) - 1) ++ ++/* VLAN fields */ ++#define NH_FLD_VLAN_VPRI BIT(0) ++#define NH_FLD_VLAN_CFI BIT(1) ++#define NH_FLD_VLAN_VID BIT(2) ++#define NH_FLD_VLAN_LENGTH BIT(3) ++#define NH_FLD_VLAN_TYPE BIT(4) ++#define NH_FLD_VLAN_ALL_FIELDS (BIT(5) - 1) ++ ++#define NH_FLD_VLAN_TCI (NH_FLD_VLAN_VPRI | \ ++ NH_FLD_VLAN_CFI | \ ++ NH_FLD_VLAN_VID) ++ ++/* IP (generic) fields */ ++#define NH_FLD_IP_VER BIT(0) ++#define NH_FLD_IP_DSCP BIT(2) ++#define NH_FLD_IP_ECN BIT(3) ++#define NH_FLD_IP_PROTO BIT(4) ++#define NH_FLD_IP_SRC BIT(5) ++#define NH_FLD_IP_DST BIT(6) ++#define NH_FLD_IP_TOS_TC BIT(7) ++#define NH_FLD_IP_ID BIT(8) ++#define NH_FLD_IP_ALL_FIELDS (BIT(9) - 1) ++ ++/* IPV4 fields */ ++#define NH_FLD_IPV4_VER BIT(0) ++#define NH_FLD_IPV4_HDR_LEN BIT(1) ++#define NH_FLD_IPV4_TOS BIT(2) ++#define NH_FLD_IPV4_TOTAL_LEN BIT(3) ++#define NH_FLD_IPV4_ID BIT(4) ++#define NH_FLD_IPV4_FLAG_D BIT(5) ++#define NH_FLD_IPV4_FLAG_M BIT(6) ++#define NH_FLD_IPV4_OFFSET BIT(7) ++#define NH_FLD_IPV4_TTL BIT(8) ++#define NH_FLD_IPV4_PROTO BIT(9) ++#define NH_FLD_IPV4_CKSUM BIT(10) ++#define NH_FLD_IPV4_SRC_IP BIT(11) ++#define NH_FLD_IPV4_DST_IP BIT(12) ++#define NH_FLD_IPV4_OPTS BIT(13) ++#define NH_FLD_IPV4_OPTS_COUNT BIT(14) ++#define NH_FLD_IPV4_ALL_FIELDS (BIT(15) - 1) ++ ++/* IPV6 fields */ ++#define NH_FLD_IPV6_VER BIT(0) ++#define NH_FLD_IPV6_TC BIT(1) ++#define NH_FLD_IPV6_SRC_IP BIT(2) ++#define NH_FLD_IPV6_DST_IP BIT(3) ++#define NH_FLD_IPV6_NEXT_HDR BIT(4) ++#define NH_FLD_IPV6_FL BIT(5) ++#define NH_FLD_IPV6_HOP_LIMIT BIT(6) ++#define NH_FLD_IPV6_ID BIT(7) ++#define NH_FLD_IPV6_ALL_FIELDS (BIT(8) - 1) ++ ++/* ICMP fields */ ++#define NH_FLD_ICMP_TYPE BIT(0) ++#define NH_FLD_ICMP_CODE BIT(1) ++#define NH_FLD_ICMP_CKSUM BIT(2) ++#define NH_FLD_ICMP_ID BIT(3) ++#define NH_FLD_ICMP_SQ_NUM BIT(4) ++#define NH_FLD_ICMP_ALL_FIELDS (BIT(5) - 1) ++ ++/* IGMP fields */ ++#define NH_FLD_IGMP_VERSION BIT(0) ++#define NH_FLD_IGMP_TYPE BIT(1) ++#define NH_FLD_IGMP_CKSUM BIT(2) ++#define NH_FLD_IGMP_DATA BIT(3) ++#define NH_FLD_IGMP_ALL_FIELDS (BIT(4) - 1) ++ ++/* TCP fields */ ++#define NH_FLD_TCP_PORT_SRC BIT(0) ++#define NH_FLD_TCP_PORT_DST BIT(1) ++#define NH_FLD_TCP_SEQ BIT(2) ++#define NH_FLD_TCP_ACK BIT(3) ++#define NH_FLD_TCP_OFFSET BIT(4) ++#define NH_FLD_TCP_FLAGS BIT(5) ++#define NH_FLD_TCP_WINDOW BIT(6) ++#define NH_FLD_TCP_CKSUM BIT(7) ++#define NH_FLD_TCP_URGPTR BIT(8) ++#define NH_FLD_TCP_OPTS BIT(9) ++#define NH_FLD_TCP_OPTS_COUNT BIT(10) ++#define NH_FLD_TCP_ALL_FIELDS (BIT(11) - 1) ++ ++/* UDP fields */ ++#define NH_FLD_UDP_PORT_SRC BIT(0) ++#define NH_FLD_UDP_PORT_DST BIT(1) ++#define NH_FLD_UDP_LEN BIT(2) ++#define NH_FLD_UDP_CKSUM BIT(3) ++#define NH_FLD_UDP_ALL_FIELDS (BIT(4) - 1) ++ ++/* UDP-lite fields */ ++#define NH_FLD_UDP_LITE_PORT_SRC BIT(0) ++#define NH_FLD_UDP_LITE_PORT_DST BIT(1) ++#define NH_FLD_UDP_LITE_ALL_FIELDS (BIT(2) - 1) ++ ++/* UDP-encap-ESP fields */ ++#define NH_FLD_UDP_ENC_ESP_PORT_SRC BIT(0) ++#define NH_FLD_UDP_ENC_ESP_PORT_DST BIT(1) ++#define NH_FLD_UDP_ENC_ESP_LEN BIT(2) ++#define NH_FLD_UDP_ENC_ESP_CKSUM BIT(3) ++#define NH_FLD_UDP_ENC_ESP_SPI BIT(4) ++#define NH_FLD_UDP_ENC_ESP_SEQUENCE_NUM BIT(5) ++#define NH_FLD_UDP_ENC_ESP_ALL_FIELDS (BIT(6) - 1) ++ ++/* SCTP fields */ ++#define NH_FLD_SCTP_PORT_SRC BIT(0) ++#define NH_FLD_SCTP_PORT_DST BIT(1) ++#define NH_FLD_SCTP_VER_TAG BIT(2) ++#define NH_FLD_SCTP_CKSUM BIT(3) ++#define NH_FLD_SCTP_ALL_FIELDS (BIT(4) - 1) ++ ++/* DCCP fields */ ++#define NH_FLD_DCCP_PORT_SRC BIT(0) ++#define NH_FLD_DCCP_PORT_DST BIT(1) ++#define NH_FLD_DCCP_ALL_FIELDS (BIT(2) - 1) ++ ++/* IPHC fields */ ++#define NH_FLD_IPHC_CID BIT(0) ++#define NH_FLD_IPHC_CID_TYPE BIT(1) ++#define NH_FLD_IPHC_HCINDEX BIT(2) ++#define NH_FLD_IPHC_GEN BIT(3) ++#define NH_FLD_IPHC_D_BIT BIT(4) ++#define NH_FLD_IPHC_ALL_FIELDS (BIT(5) - 1) ++ ++/* SCTP fields */ ++#define NH_FLD_SCTP_CHUNK_DATA_TYPE BIT(0) ++#define NH_FLD_SCTP_CHUNK_DATA_FLAGS BIT(1) ++#define NH_FLD_SCTP_CHUNK_DATA_LENGTH BIT(2) ++#define NH_FLD_SCTP_CHUNK_DATA_TSN BIT(3) ++#define NH_FLD_SCTP_CHUNK_DATA_STREAM_ID BIT(4) ++#define NH_FLD_SCTP_CHUNK_DATA_STREAM_SQN BIT(5) ++#define NH_FLD_SCTP_CHUNK_DATA_PAYLOAD_PID BIT(6) ++#define NH_FLD_SCTP_CHUNK_DATA_UNORDERED BIT(7) ++#define NH_FLD_SCTP_CHUNK_DATA_BEGGINING BIT(8) ++#define NH_FLD_SCTP_CHUNK_DATA_END BIT(9) ++#define NH_FLD_SCTP_CHUNK_DATA_ALL_FIELDS (BIT(10) - 1) ++ ++/* L2TPV2 fields */ ++#define NH_FLD_L2TPV2_TYPE_BIT BIT(0) ++#define NH_FLD_L2TPV2_LENGTH_BIT BIT(1) ++#define NH_FLD_L2TPV2_SEQUENCE_BIT BIT(2) ++#define NH_FLD_L2TPV2_OFFSET_BIT BIT(3) ++#define NH_FLD_L2TPV2_PRIORITY_BIT BIT(4) ++#define NH_FLD_L2TPV2_VERSION BIT(5) ++#define NH_FLD_L2TPV2_LEN BIT(6) ++#define NH_FLD_L2TPV2_TUNNEL_ID BIT(7) ++#define NH_FLD_L2TPV2_SESSION_ID BIT(8) ++#define NH_FLD_L2TPV2_NS BIT(9) ++#define NH_FLD_L2TPV2_NR BIT(10) ++#define NH_FLD_L2TPV2_OFFSET_SIZE BIT(11) ++#define NH_FLD_L2TPV2_FIRST_BYTE BIT(12) ++#define NH_FLD_L2TPV2_ALL_FIELDS (BIT(13) - 1) ++ ++/* L2TPV3 fields */ ++#define NH_FLD_L2TPV3_CTRL_TYPE_BIT BIT(0) ++#define NH_FLD_L2TPV3_CTRL_LENGTH_BIT BIT(1) ++#define NH_FLD_L2TPV3_CTRL_SEQUENCE_BIT BIT(2) ++#define NH_FLD_L2TPV3_CTRL_VERSION BIT(3) ++#define NH_FLD_L2TPV3_CTRL_LENGTH BIT(4) ++#define NH_FLD_L2TPV3_CTRL_CONTROL BIT(5) ++#define NH_FLD_L2TPV3_CTRL_SENT BIT(6) ++#define NH_FLD_L2TPV3_CTRL_RECV BIT(7) ++#define NH_FLD_L2TPV3_CTRL_FIRST_BYTE BIT(8) ++#define NH_FLD_L2TPV3_CTRL_ALL_FIELDS (BIT(9) - 1) ++ ++#define NH_FLD_L2TPV3_SESS_TYPE_BIT BIT(0) ++#define NH_FLD_L2TPV3_SESS_VERSION BIT(1) ++#define NH_FLD_L2TPV3_SESS_ID BIT(2) ++#define NH_FLD_L2TPV3_SESS_COOKIE BIT(3) ++#define NH_FLD_L2TPV3_SESS_ALL_FIELDS (BIT(4) - 1) ++ ++/* PPP fields */ ++#define NH_FLD_PPP_PID BIT(0) ++#define NH_FLD_PPP_COMPRESSED BIT(1) ++#define NH_FLD_PPP_ALL_FIELDS (BIT(2) - 1) ++ ++/* PPPoE fields */ ++#define NH_FLD_PPPOE_VER BIT(0) ++#define NH_FLD_PPPOE_TYPE BIT(1) ++#define NH_FLD_PPPOE_CODE BIT(2) ++#define NH_FLD_PPPOE_SID BIT(3) ++#define NH_FLD_PPPOE_LEN BIT(4) ++#define NH_FLD_PPPOE_SESSION BIT(5) ++#define NH_FLD_PPPOE_PID BIT(6) ++#define NH_FLD_PPPOE_ALL_FIELDS (BIT(7) - 1) ++ ++/* PPP-Mux fields */ ++#define NH_FLD_PPPMUX_PID BIT(0) ++#define NH_FLD_PPPMUX_CKSUM BIT(1) ++#define NH_FLD_PPPMUX_COMPRESSED BIT(2) ++#define NH_FLD_PPPMUX_ALL_FIELDS (BIT(3) - 1) ++ ++/* PPP-Mux sub-frame fields */ ++#define NH_FLD_PPPMUX_SUBFRM_PFF BIT(0) ++#define NH_FLD_PPPMUX_SUBFRM_LXT BIT(1) ++#define NH_FLD_PPPMUX_SUBFRM_LEN BIT(2) ++#define NH_FLD_PPPMUX_SUBFRM_PID BIT(3) ++#define NH_FLD_PPPMUX_SUBFRM_USE_PID BIT(4) ++#define NH_FLD_PPPMUX_SUBFRM_ALL_FIELDS (BIT(5) - 1) ++ ++/* LLC fields */ ++#define NH_FLD_LLC_DSAP BIT(0) ++#define NH_FLD_LLC_SSAP BIT(1) ++#define NH_FLD_LLC_CTRL BIT(2) ++#define NH_FLD_LLC_ALL_FIELDS (BIT(3) - 1) ++ ++/* NLPID fields */ ++#define NH_FLD_NLPID_NLPID BIT(0) ++#define NH_FLD_NLPID_ALL_FIELDS (BIT(1) - 1) ++ ++/* SNAP fields */ ++#define NH_FLD_SNAP_OUI BIT(0) ++#define NH_FLD_SNAP_PID BIT(1) ++#define NH_FLD_SNAP_ALL_FIELDS (BIT(2) - 1) ++ ++/* LLC SNAP fields */ ++#define NH_FLD_LLC_SNAP_TYPE BIT(0) ++#define NH_FLD_LLC_SNAP_ALL_FIELDS (BIT(1) - 1) ++ ++/* ARP fields */ ++#define NH_FLD_ARP_HTYPE BIT(0) ++#define NH_FLD_ARP_PTYPE BIT(1) ++#define NH_FLD_ARP_HLEN BIT(2) ++#define NH_FLD_ARP_PLEN BIT(3) ++#define NH_FLD_ARP_OPER BIT(4) ++#define NH_FLD_ARP_SHA BIT(5) ++#define NH_FLD_ARP_SPA BIT(6) ++#define NH_FLD_ARP_THA BIT(7) ++#define NH_FLD_ARP_TPA BIT(8) ++#define NH_FLD_ARP_ALL_FIELDS (BIT(9) - 1) ++ ++/* RFC2684 fields */ ++#define NH_FLD_RFC2684_LLC BIT(0) ++#define NH_FLD_RFC2684_NLPID BIT(1) ++#define NH_FLD_RFC2684_OUI BIT(2) ++#define NH_FLD_RFC2684_PID BIT(3) ++#define NH_FLD_RFC2684_VPN_OUI BIT(4) ++#define NH_FLD_RFC2684_VPN_IDX BIT(5) ++#define NH_FLD_RFC2684_ALL_FIELDS (BIT(6) - 1) ++ ++/* User defined fields */ ++#define NH_FLD_USER_DEFINED_SRCPORT BIT(0) ++#define NH_FLD_USER_DEFINED_PCDID BIT(1) ++#define NH_FLD_USER_DEFINED_ALL_FIELDS (BIT(2) - 1) ++ ++/* Payload fields */ ++#define NH_FLD_PAYLOAD_BUFFER BIT(0) ++#define NH_FLD_PAYLOAD_SIZE BIT(1) ++#define NH_FLD_MAX_FRM_SIZE BIT(2) ++#define NH_FLD_MIN_FRM_SIZE BIT(3) ++#define NH_FLD_PAYLOAD_TYPE BIT(4) ++#define NH_FLD_FRAME_SIZE BIT(5) ++#define NH_FLD_PAYLOAD_ALL_FIELDS (BIT(6) - 1) ++ ++/* GRE fields */ ++#define NH_FLD_GRE_TYPE BIT(0) ++#define NH_FLD_GRE_ALL_FIELDS (BIT(1) - 1) ++ ++/* MINENCAP fields */ ++#define NH_FLD_MINENCAP_SRC_IP BIT(0) ++#define NH_FLD_MINENCAP_DST_IP BIT(1) ++#define NH_FLD_MINENCAP_TYPE BIT(2) ++#define NH_FLD_MINENCAP_ALL_FIELDS (BIT(3) - 1) ++ ++/* IPSEC AH fields */ ++#define NH_FLD_IPSEC_AH_SPI BIT(0) ++#define NH_FLD_IPSEC_AH_NH BIT(1) ++#define NH_FLD_IPSEC_AH_ALL_FIELDS (BIT(2) - 1) ++ ++/* IPSEC ESP fields */ ++#define NH_FLD_IPSEC_ESP_SPI BIT(0) ++#define NH_FLD_IPSEC_ESP_SEQUENCE_NUM BIT(1) ++#define NH_FLD_IPSEC_ESP_ALL_FIELDS (BIT(2) - 1) ++ ++/* MPLS fields */ ++#define NH_FLD_MPLS_LABEL_STACK BIT(0) ++#define NH_FLD_MPLS_LABEL_STACK_ALL_FIELDS (BIT(1) - 1) ++ ++/* MACSEC fields */ ++#define NH_FLD_MACSEC_SECTAG BIT(0) ++#define NH_FLD_MACSEC_ALL_FIELDS (BIT(1) - 1) ++ ++/* GTP fields */ ++#define NH_FLD_GTP_TEID BIT(0) ++ ++/* Supported protocols */ ++enum net_prot { ++ NET_PROT_NONE = 0, ++ NET_PROT_PAYLOAD, ++ NET_PROT_ETH, ++ NET_PROT_VLAN, ++ NET_PROT_IPV4, ++ NET_PROT_IPV6, ++ NET_PROT_IP, ++ NET_PROT_TCP, ++ NET_PROT_UDP, ++ NET_PROT_UDP_LITE, ++ NET_PROT_IPHC, ++ NET_PROT_SCTP, ++ NET_PROT_SCTP_CHUNK_DATA, ++ NET_PROT_PPPOE, ++ NET_PROT_PPP, ++ NET_PROT_PPPMUX, ++ NET_PROT_PPPMUX_SUBFRM, ++ NET_PROT_L2TPV2, ++ NET_PROT_L2TPV3_CTRL, ++ NET_PROT_L2TPV3_SESS, ++ NET_PROT_LLC, ++ NET_PROT_LLC_SNAP, ++ NET_PROT_NLPID, ++ NET_PROT_SNAP, ++ NET_PROT_MPLS, ++ NET_PROT_IPSEC_AH, ++ NET_PROT_IPSEC_ESP, ++ NET_PROT_UDP_ENC_ESP, /* RFC 3948 */ ++ NET_PROT_MACSEC, ++ NET_PROT_GRE, ++ NET_PROT_MINENCAP, ++ NET_PROT_DCCP, ++ NET_PROT_ICMP, ++ NET_PROT_IGMP, ++ NET_PROT_ARP, ++ NET_PROT_CAPWAP_DATA, ++ NET_PROT_CAPWAP_CTRL, ++ NET_PROT_RFC2684, ++ NET_PROT_ICMPV6, ++ NET_PROT_FCOE, ++ NET_PROT_FIP, ++ NET_PROT_ISCSI, ++ NET_PROT_GTP, ++ NET_PROT_USER_DEFINED_L2, ++ NET_PROT_USER_DEFINED_L3, ++ NET_PROT_USER_DEFINED_L4, ++ NET_PROT_USER_DEFINED_L5, ++ NET_PROT_USER_DEFINED_SHIM1, ++ NET_PROT_USER_DEFINED_SHIM2, ++ ++ NET_PROT_DUMMY_LAST ++}; ++ + /** + * struct dpkg_extract - A structure for defining a single extraction + * @type: Determines how the union below is interpreted: --- a/drivers/staging/fsl-dpaa2/ethernet/dpni-cmd.h +++ b/drivers/staging/fsl-dpaa2/ethernet/dpni-cmd.h -@@ -39,9 +39,11 @@ +@@ -1,34 +1,6 @@ ++/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ + /* Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2016 NXP +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of the above-listed copyright holders nor the +- * names of any contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE +- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +- * POSSIBILITY OF SUCH DAMAGE. + */ + #ifndef _FSL_DPNI_CMD_H + #define _FSL_DPNI_CMD_H +@@ -39,9 +11,11 @@ #define DPNI_VER_MAJOR 7 #define DPNI_VER_MINOR 0 #define DPNI_CMD_BASE_VERSION 1 @@ -6451,7 +7226,7 @@ Signed-off-by: Biwen Li #define DPNI_CMDID_OPEN DPNI_CMD(0x801) #define DPNI_CMDID_CLOSE DPNI_CMD(0x800) -@@ -64,7 +66,7 @@ +@@ -64,16 +38,18 @@ #define DPNI_CMDID_GET_IRQ_STATUS DPNI_CMD(0x016) #define DPNI_CMDID_CLEAR_IRQ_STATUS DPNI_CMD(0x017) @@ -6460,16 +7235,19 @@ Signed-off-by: Biwen Li #define DPNI_CMDID_SET_ERRORS_BEHAVIOR DPNI_CMD(0x20B) #define DPNI_CMDID_GET_QDID DPNI_CMD(0x210) -@@ -73,7 +75,7 @@ + #define DPNI_CMDID_GET_TX_DATA_OFFSET DPNI_CMD(0x212) + #define DPNI_CMDID_GET_LINK_STATE DPNI_CMD(0x215) ++#define DPNI_CMDID_GET_LINK_STATE_V2 DPNI_CMD_V2(0x215) #define DPNI_CMDID_SET_MAX_FRAME_LENGTH DPNI_CMD(0x216) #define DPNI_CMDID_GET_MAX_FRAME_LENGTH DPNI_CMD(0x217) #define DPNI_CMDID_SET_LINK_CFG DPNI_CMD(0x21A) -#define DPNI_CMDID_SET_TX_SHAPING DPNI_CMD(0x21B) ++#define DPNI_CMDID_SET_LINK_CFG_V2 DPNI_CMD_V2(0x21A) +#define DPNI_CMDID_SET_TX_SHAPING DPNI_CMD_V2(0x21B) #define DPNI_CMDID_SET_MCAST_PROMISC DPNI_CMD(0x220) #define DPNI_CMDID_GET_MCAST_PROMISC DPNI_CMD(0x221) -@@ -87,11 +89,16 @@ +@@ -87,11 +63,16 @@ #define DPNI_CMDID_SET_RX_TC_DIST DPNI_CMD(0x235) @@ -6487,7 +7265,7 @@ Signed-off-by: Biwen Li #define DPNI_CMDID_GET_QUEUE DPNI_CMD(0x25F) #define DPNI_CMDID_SET_QUEUE DPNI_CMD(0x260) #define DPNI_CMDID_GET_TAILDROP DPNI_CMD(0x261) -@@ -110,6 +117,9 @@ +@@ -110,6 +91,9 @@ #define DPNI_CMDID_GET_OFFLOAD DPNI_CMD(0x26B) #define DPNI_CMDID_SET_OFFLOAD DPNI_CMD(0x26C) @@ -6497,7 +7275,7 @@ Signed-off-by: Biwen Li /* Macros for accessing command fields smaller than 1byte */ #define DPNI_MASK(field) \ GENMASK(DPNI_##field##_SHIFT + DPNI_##field##_SIZE - 1, \ -@@ -126,13 +136,14 @@ struct dpni_cmd_open { +@@ -126,13 +110,14 @@ struct dpni_cmd_open { #define DPNI_BACKUP_POOL(val, order) (((val) & 0x1) << (order)) struct dpni_cmd_set_pools { @@ -6516,7 +7294,7 @@ Signed-off-by: Biwen Li __le16 buffer_size[DPNI_MAX_DPBP]; }; -@@ -303,6 +314,7 @@ struct dpni_rsp_get_tx_data_offset { +@@ -303,6 +288,7 @@ struct dpni_rsp_get_tx_data_offset { struct dpni_cmd_get_statistics { u8 page_number; @@ -6524,10 +7302,50 @@ Signed-off-by: Biwen Li }; struct dpni_rsp_get_statistics { -@@ -335,6 +347,22 @@ struct dpni_rsp_get_link_state { +@@ -319,8 +305,22 @@ struct dpni_cmd_set_link_cfg { + __le64 options; + }; + ++struct dpni_cmd_set_link_cfg_v2 { ++ /* cmd word 0 */ ++ __le64 pad0; ++ /* cmd word 1 */ ++ __le32 rate; ++ __le32 pad1; ++ /* cmd word 2 */ ++ __le64 options; ++ /* cmd word 3 */ ++ __le64 advertising; ++}; ++ + #define DPNI_LINK_STATE_SHIFT 0 + #define DPNI_LINK_STATE_SIZE 1 ++#define DPNI_STATE_VALID_SHIFT 1 ++#define DPNI_STATE_VALID_SIZE 1 + + struct dpni_rsp_get_link_state { + /* response word 0 */ +@@ -335,6 +335,39 @@ struct dpni_rsp_get_link_state { __le64 options; }; ++struct dpni_rsp_get_link_state_v2 { ++ /* response word 0 */ ++ __le32 pad0; ++ /* from LSB: up:1, valid:1 */ ++ u8 flags; ++ u8 pad1[3]; ++ /* response word 1 */ ++ __le32 rate; ++ __le32 pad2; ++ /* response word 2 */ ++ __le64 options; ++ /* cmd word 3 */ ++ __le64 supported; ++ /* cmd word 4 */ ++ __le64 advertising; ++}; ++ +#define DPNI_COUPLED_SHIFT 0 +#define DPNI_COUPLED_SIZE 1 + @@ -6547,7 +7365,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_max_frame_length { __le16 max_frame_length; }; -@@ -394,6 +422,24 @@ struct dpni_cmd_clear_mac_filters { +@@ -394,6 +427,24 @@ struct dpni_cmd_clear_mac_filters { u8 flags; }; @@ -6572,7 +7390,7 @@ Signed-off-by: Biwen Li #define DPNI_DIST_MODE_SHIFT 0 #define DPNI_DIST_MODE_SIZE 4 #define DPNI_MISS_ACTION_SHIFT 4 -@@ -503,6 +549,63 @@ struct dpni_cmd_set_queue { +@@ -503,6 +554,63 @@ struct dpni_cmd_set_queue { __le64 user_context; }; @@ -6636,7 +7454,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_taildrop { /* cmd word 0 */ u8 congestion_point; -@@ -538,4 +641,79 @@ struct dpni_rsp_get_taildrop { +@@ -538,4 +646,79 @@ struct dpni_rsp_get_taildrop { __le32 threshold; }; @@ -6718,7 +7536,43 @@ Signed-off-by: Biwen Li #endif /* _FSL_DPNI_CMD_H */ --- a/drivers/staging/fsl-dpaa2/ethernet/dpni.c +++ b/drivers/staging/fsl-dpaa2/ethernet/dpni.c -@@ -122,7 +122,7 @@ int dpni_open(struct fsl_mc_io *mc_io, +@@ -1,34 +1,6 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + /* Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2016 NXP +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of the above-listed copyright holders nor the +- * names of any contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE +- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +- * POSSIBILITY OF SUCH DAMAGE. + */ + #include + #include +@@ -122,7 +94,7 @@ int dpni_open(struct fsl_mc_io *mc_io, int dpni_id, u16 *token) { @@ -6727,7 +7581,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_open *cmd_params; int err; -@@ -160,7 +160,7 @@ int dpni_close(struct fsl_mc_io *mc_io, +@@ -160,7 +132,7 @@ int dpni_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token) { @@ -6736,7 +7590,7 @@ Signed-off-by: Biwen Li /* prepare command */ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLOSE, -@@ -188,7 +188,7 @@ int dpni_set_pools(struct fsl_mc_io *mc_ +@@ -188,7 +160,7 @@ int dpni_set_pools(struct fsl_mc_io *mc_ u16 token, const struct dpni_pools_cfg *cfg) { @@ -6745,7 +7599,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_pools *cmd_params; int i; -@@ -199,7 +199,10 @@ int dpni_set_pools(struct fsl_mc_io *mc_ +@@ -199,7 +171,10 @@ int dpni_set_pools(struct fsl_mc_io *mc_ cmd_params = (struct dpni_cmd_set_pools *)cmd.params; cmd_params->num_dpbp = cfg->num_dpbp; for (i = 0; i < DPNI_MAX_DPBP; i++) { @@ -6757,7 +7611,7 @@ Signed-off-by: Biwen Li cmd_params->buffer_size[i] = cpu_to_le16(cfg->pools[i].buffer_size); cmd_params->backup_pool_mask |= -@@ -222,7 +225,7 @@ int dpni_enable(struct fsl_mc_io *mc_io, +@@ -222,7 +197,7 @@ int dpni_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token) { @@ -6766,7 +7620,7 @@ Signed-off-by: Biwen Li /* prepare command */ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ENABLE, -@@ -245,7 +248,7 @@ int dpni_disable(struct fsl_mc_io *mc_io +@@ -245,7 +220,7 @@ int dpni_disable(struct fsl_mc_io *mc_io u32 cmd_flags, u16 token) { @@ -6775,7 +7629,7 @@ Signed-off-by: Biwen Li /* prepare command */ cmd.header = mc_encode_cmd_header(DPNI_CMDID_DISABLE, -@@ -270,7 +273,7 @@ int dpni_is_enabled(struct fsl_mc_io *mc +@@ -270,7 +245,7 @@ int dpni_is_enabled(struct fsl_mc_io *mc u16 token, int *en) { @@ -6784,7 +7638,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_is_enabled *rsp_params; int err; -@@ -303,7 +306,7 @@ int dpni_reset(struct fsl_mc_io *mc_io, +@@ -303,7 +278,7 @@ int dpni_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token) { @@ -6793,7 +7647,7 @@ Signed-off-by: Biwen Li /* prepare command */ cmd.header = mc_encode_cmd_header(DPNI_CMDID_RESET, -@@ -335,7 +338,7 @@ int dpni_set_irq_enable(struct fsl_mc_io +@@ -335,7 +310,7 @@ int dpni_set_irq_enable(struct fsl_mc_io u8 irq_index, u8 en) { @@ -6802,7 +7656,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_irq_enable *cmd_params; /* prepare command */ -@@ -366,7 +369,7 @@ int dpni_get_irq_enable(struct fsl_mc_io +@@ -366,7 +341,7 @@ int dpni_get_irq_enable(struct fsl_mc_io u8 irq_index, u8 *en) { @@ -6811,7 +7665,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_irq_enable *cmd_params; struct dpni_rsp_get_irq_enable *rsp_params; -@@ -413,7 +416,7 @@ int dpni_set_irq_mask(struct fsl_mc_io * +@@ -413,7 +388,7 @@ int dpni_set_irq_mask(struct fsl_mc_io * u8 irq_index, u32 mask) { @@ -6820,7 +7674,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_irq_mask *cmd_params; /* prepare command */ -@@ -447,7 +450,7 @@ int dpni_get_irq_mask(struct fsl_mc_io * +@@ -447,7 +422,7 @@ int dpni_get_irq_mask(struct fsl_mc_io * u8 irq_index, u32 *mask) { @@ -6829,7 +7683,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_irq_mask *cmd_params; struct dpni_rsp_get_irq_mask *rsp_params; int err; -@@ -489,7 +492,7 @@ int dpni_get_irq_status(struct fsl_mc_io +@@ -489,7 +464,7 @@ int dpni_get_irq_status(struct fsl_mc_io u8 irq_index, u32 *status) { @@ -6838,7 +7692,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_irq_status *cmd_params; struct dpni_rsp_get_irq_status *rsp_params; int err; -@@ -532,7 +535,7 @@ int dpni_clear_irq_status(struct fsl_mc_ +@@ -532,7 +507,7 @@ int dpni_clear_irq_status(struct fsl_mc_ u8 irq_index, u32 status) { @@ -6847,7 +7701,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_clear_irq_status *cmd_params; /* prepare command */ -@@ -561,7 +564,7 @@ int dpni_get_attributes(struct fsl_mc_io +@@ -561,7 +536,7 @@ int dpni_get_attributes(struct fsl_mc_io u16 token, struct dpni_attr *attr) { @@ -6856,7 +7710,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_attr *rsp_params; int err; -@@ -609,7 +612,7 @@ int dpni_set_errors_behavior(struct fsl_ +@@ -609,7 +584,7 @@ int dpni_set_errors_behavior(struct fsl_ u16 token, struct dpni_error_cfg *cfg) { @@ -6865,7 +7719,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_errors_behavior *cmd_params; /* prepare command */ -@@ -641,7 +644,7 @@ int dpni_get_buffer_layout(struct fsl_mc +@@ -641,7 +616,7 @@ int dpni_get_buffer_layout(struct fsl_mc enum dpni_queue_type qtype, struct dpni_buffer_layout *layout) { @@ -6874,7 +7728,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_buffer_layout *cmd_params; struct dpni_rsp_get_buffer_layout *rsp_params; int err; -@@ -689,7 +692,7 @@ int dpni_set_buffer_layout(struct fsl_mc +@@ -689,7 +664,7 @@ int dpni_set_buffer_layout(struct fsl_mc enum dpni_queue_type qtype, const struct dpni_buffer_layout *layout) { @@ -6883,7 +7737,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_buffer_layout *cmd_params; /* prepare command */ -@@ -731,7 +734,7 @@ int dpni_set_offload(struct fsl_mc_io *m +@@ -731,7 +706,7 @@ int dpni_set_offload(struct fsl_mc_io *m enum dpni_offload type, u32 config) { @@ -6892,7 +7746,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_offload *cmd_params; cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_OFFLOAD, -@@ -750,7 +753,7 @@ int dpni_get_offload(struct fsl_mc_io *m +@@ -750,7 +725,7 @@ int dpni_get_offload(struct fsl_mc_io *m enum dpni_offload type, u32 *config) { @@ -6901,7 +7755,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_offload *cmd_params; struct dpni_rsp_get_offload *rsp_params; int err; -@@ -792,7 +795,7 @@ int dpni_get_qdid(struct fsl_mc_io *mc_i +@@ -792,7 +767,7 @@ int dpni_get_qdid(struct fsl_mc_io *mc_i enum dpni_queue_type qtype, u16 *qdid) { @@ -6910,7 +7764,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_qdid *cmd_params; struct dpni_rsp_get_qdid *rsp_params; int err; -@@ -830,7 +833,7 @@ int dpni_get_tx_data_offset(struct fsl_m +@@ -830,7 +805,7 @@ int dpni_get_tx_data_offset(struct fsl_m u16 token, u16 *data_offset) { @@ -6919,7 +7773,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_tx_data_offset *rsp_params; int err; -@@ -865,7 +868,7 @@ int dpni_set_link_cfg(struct fsl_mc_io * +@@ -865,7 +840,7 @@ int dpni_set_link_cfg(struct fsl_mc_io * u16 token, const struct dpni_link_cfg *cfg) { @@ -6928,7 +7782,44 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_link_cfg *cmd_params; /* prepare command */ -@@ -894,7 +897,7 @@ int dpni_get_link_state(struct fsl_mc_io +@@ -881,6 +856,36 @@ int dpni_set_link_cfg(struct fsl_mc_io * + } + + /** ++ * dpni_set_link_cfg_v2() - set the link configuration. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: Link configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_link_cfg_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ const struct dpni_link_cfg *cfg) ++{ ++ struct fsl_mc_command cmd = { 0 }; ++ struct dpni_cmd_set_link_cfg_v2 *cmd_params; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_LINK_CFG_V2, ++ cmd_flags, ++ token); ++ cmd_params = (struct dpni_cmd_set_link_cfg_v2 *)cmd.params; ++ cmd_params->rate = cpu_to_le32(cfg->rate); ++ cmd_params->options = cpu_to_le64(cfg->options); ++ cmd_params->advertising = cpu_to_le64(cfg->advertising); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++/** + * dpni_get_link_state() - Return the link state (either up or down) + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' +@@ -894,7 +899,7 @@ int dpni_get_link_state(struct fsl_mc_io u16 token, struct dpni_link_state *state) { @@ -6937,10 +7828,50 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_link_state *rsp_params; int err; -@@ -918,6 +921,44 @@ int dpni_get_link_state(struct fsl_mc_io +@@ -918,6 +923,84 @@ int dpni_get_link_state(struct fsl_mc_io } /** ++ * dpni_get_link_state_v2() - Return the link state (either up or down) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @state: Returned link state; ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_link_state_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpni_link_state *state) ++{ ++ struct fsl_mc_command cmd = { 0 }; ++ struct dpni_rsp_get_link_state_v2 *rsp_params; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_LINK_STATE_V2, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ rsp_params = (struct dpni_rsp_get_link_state_v2 *)cmd.params; ++ state->up = dpni_get_field(rsp_params->flags, LINK_STATE); ++ state->state_valid = dpni_get_field(rsp_params->flags, STATE_VALID); ++ state->rate = le32_to_cpu(rsp_params->rate); ++ state->options = le64_to_cpu(rsp_params->options); ++ state->supported = le64_to_cpu(rsp_params->supported); ++ state->advertising = le64_to_cpu(rsp_params->advertising); ++ ++ return 0; ++} ++ ++/** + * dpni_set_tx_shaping() - Set the transmit shaping + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' @@ -6982,7 +7913,7 @@ Signed-off-by: Biwen Li * dpni_set_max_frame_length() - Set the maximum received frame length. * @mc_io: Pointer to MC portal's I/O object * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' -@@ -933,7 +974,7 @@ int dpni_set_max_frame_length(struct fsl +@@ -933,7 +1016,7 @@ int dpni_set_max_frame_length(struct fsl u16 token, u16 max_frame_length) { @@ -6991,7 +7922,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_max_frame_length *cmd_params; /* prepare command */ -@@ -963,7 +1004,7 @@ int dpni_get_max_frame_length(struct fsl +@@ -963,7 +1046,7 @@ int dpni_get_max_frame_length(struct fsl u16 token, u16 *max_frame_length) { @@ -7000,7 +7931,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_max_frame_length *rsp_params; int err; -@@ -998,7 +1039,7 @@ int dpni_set_multicast_promisc(struct fs +@@ -998,7 +1081,7 @@ int dpni_set_multicast_promisc(struct fs u16 token, int en) { @@ -7009,7 +7940,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_multicast_promisc *cmd_params; /* prepare command */ -@@ -1026,7 +1067,7 @@ int dpni_get_multicast_promisc(struct fs +@@ -1026,7 +1109,7 @@ int dpni_get_multicast_promisc(struct fs u16 token, int *en) { @@ -7018,7 +7949,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_multicast_promisc *rsp_params; int err; -@@ -1061,7 +1102,7 @@ int dpni_set_unicast_promisc(struct fsl_ +@@ -1061,7 +1144,7 @@ int dpni_set_unicast_promisc(struct fsl_ u16 token, int en) { @@ -7027,7 +7958,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_unicast_promisc *cmd_params; /* prepare command */ -@@ -1089,7 +1130,7 @@ int dpni_get_unicast_promisc(struct fsl_ +@@ -1089,7 +1172,7 @@ int dpni_get_unicast_promisc(struct fsl_ u16 token, int *en) { @@ -7036,7 +7967,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_unicast_promisc *rsp_params; int err; -@@ -1124,7 +1165,7 @@ int dpni_set_primary_mac_addr(struct fsl +@@ -1124,7 +1207,7 @@ int dpni_set_primary_mac_addr(struct fsl u16 token, const u8 mac_addr[6]) { @@ -7045,7 +7976,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_primary_mac_addr *cmd_params; int i; -@@ -1154,7 +1195,7 @@ int dpni_get_primary_mac_addr(struct fsl +@@ -1154,7 +1237,7 @@ int dpni_get_primary_mac_addr(struct fsl u16 token, u8 mac_addr[6]) { @@ -7054,7 +7985,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_primary_mac_addr *rsp_params; int i, err; -@@ -1193,7 +1234,7 @@ int dpni_get_port_mac_addr(struct fsl_mc +@@ -1193,7 +1276,7 @@ int dpni_get_port_mac_addr(struct fsl_mc u16 token, u8 mac_addr[6]) { @@ -7063,7 +7994,7 @@ Signed-off-by: Biwen Li struct dpni_rsp_get_port_mac_addr *rsp_params; int i, err; -@@ -1229,7 +1270,7 @@ int dpni_add_mac_addr(struct fsl_mc_io * +@@ -1229,7 +1312,7 @@ int dpni_add_mac_addr(struct fsl_mc_io * u16 token, const u8 mac_addr[6]) { @@ -7072,7 +8003,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_add_mac_addr *cmd_params; int i; -@@ -1259,7 +1300,7 @@ int dpni_remove_mac_addr(struct fsl_mc_i +@@ -1259,7 +1342,7 @@ int dpni_remove_mac_addr(struct fsl_mc_i u16 token, const u8 mac_addr[6]) { @@ -7081,7 +8012,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_remove_mac_addr *cmd_params; int i; -@@ -1293,7 +1334,7 @@ int dpni_clear_mac_filters(struct fsl_mc +@@ -1293,7 +1376,7 @@ int dpni_clear_mac_filters(struct fsl_mc int unicast, int multicast) { @@ -7090,7 +8021,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_clear_mac_filters *cmd_params; /* prepare command */ -@@ -1309,6 +1350,55 @@ int dpni_clear_mac_filters(struct fsl_mc +@@ -1309,6 +1392,55 @@ int dpni_clear_mac_filters(struct fsl_mc } /** @@ -7146,7 +8077,7 @@ Signed-off-by: Biwen Li * dpni_set_rx_tc_dist() - Set Rx traffic class distribution configuration * @mc_io: Pointer to MC portal's I/O object * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' -@@ -1327,7 +1417,7 @@ int dpni_set_rx_tc_dist(struct fsl_mc_io +@@ -1327,7 +1459,7 @@ int dpni_set_rx_tc_dist(struct fsl_mc_io u8 tc_id, const struct dpni_rx_tc_dist_cfg *cfg) { @@ -7155,7 +8086,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_rx_tc_dist *cmd_params; /* prepare command */ -@@ -1346,6 +1436,293 @@ int dpni_set_rx_tc_dist(struct fsl_mc_io +@@ -1346,6 +1478,215 @@ int dpni_set_rx_tc_dist(struct fsl_mc_io return mc_send_command(mc_io, &cmd); } @@ -7266,84 +8197,6 @@ Signed-off-by: Biwen Li +} + +/** -+ * dpni_add_fs_entry() - Add Flow Steering entry for a specific traffic class -+ * (to select a flow ID) -+ * @mc_io: Pointer to MC portal's I/O object -+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' -+ * @token: Token of DPNI object -+ * @tc_id: Traffic class selection (0-7) -+ * @index: Location in the QoS table where to insert the entry. -+ * Only relevant if MASKING is enabled for QoS -+ * classification on this DPNI, it is ignored for exact match. -+ * @cfg: Flow steering rule to add -+ * @action: Action to be taken as result of a classification hit -+ * -+ * Return: '0' on Success; Error code otherwise. -+ */ -+int dpni_add_fs_entry(struct fsl_mc_io *mc_io, -+ u32 cmd_flags, -+ u16 token, -+ u8 tc_id, -+ u16 index, -+ const struct dpni_rule_cfg *cfg, -+ const struct dpni_fs_action_cfg *action) -+{ -+ struct dpni_cmd_add_fs_entry *cmd_params; -+ struct fsl_mc_command cmd = { 0 }; -+ -+ /* prepare command */ -+ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ADD_FS_ENT, -+ cmd_flags, -+ token); -+ cmd_params = (struct dpni_cmd_add_fs_entry *)cmd.params; -+ cmd_params->tc_id = tc_id; -+ cmd_params->key_size = cfg->key_size; -+ cmd_params->index = cpu_to_le16(index); -+ cmd_params->key_iova = cpu_to_le64(cfg->key_iova); -+ cmd_params->mask_iova = cpu_to_le64(cfg->mask_iova); -+ cmd_params->options = cpu_to_le16(action->options); -+ cmd_params->flow_id = cpu_to_le16(action->flow_id); -+ cmd_params->flc = cpu_to_le64(action->flc); -+ -+ /* send command to mc*/ -+ return mc_send_command(mc_io, &cmd); -+} -+ -+/** -+ * dpni_remove_fs_entry() - Remove Flow Steering entry from a specific -+ * traffic class -+ * @mc_io: Pointer to MC portal's I/O object -+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' -+ * @token: Token of DPNI object -+ * @tc_id: Traffic class selection (0-7) -+ * @cfg: Flow steering rule to remove -+ * -+ * Return: '0' on Success; Error code otherwise. -+ */ -+int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, -+ u32 cmd_flags, -+ u16 token, -+ u8 tc_id, -+ const struct dpni_rule_cfg *cfg) -+{ -+ struct dpni_cmd_remove_fs_entry *cmd_params; -+ struct fsl_mc_command cmd = { 0 }; -+ -+ /* prepare command */ -+ cmd.header = mc_encode_cmd_header(DPNI_CMDID_REMOVE_FS_ENT, -+ cmd_flags, -+ token); -+ cmd_params = (struct dpni_cmd_remove_fs_entry *)cmd.params; -+ cmd_params->tc_id = tc_id; -+ cmd_params->key_size = cfg->key_size; -+ cmd_params->key_iova = cpu_to_le64(cfg->key_iova); -+ cmd_params->mask_iova = cpu_to_le64(cfg->mask_iova); -+ -+ /* send command to mc*/ -+ return mc_send_command(mc_io, &cmd); -+} -+ -+/** + * dpni_set_congestion_notification() - Set traffic class congestion + * notification configuration + * @mc_io: Pointer to MC portal's I/O object @@ -7449,7 +8302,7 @@ Signed-off-by: Biwen Li /** * dpni_set_queue() - Set queue parameters * @mc_io: Pointer to MC portal's I/O object -@@ -1371,7 +1748,7 @@ int dpni_set_queue(struct fsl_mc_io *mc_ +@@ -1371,7 +1712,7 @@ int dpni_set_queue(struct fsl_mc_io *mc_ u8 options, const struct dpni_queue *queue) { @@ -7458,7 +8311,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_queue *cmd_params; /* prepare command */ -@@ -1419,7 +1796,7 @@ int dpni_get_queue(struct fsl_mc_io *mc_ +@@ -1419,7 +1760,7 @@ int dpni_get_queue(struct fsl_mc_io *mc_ struct dpni_queue *queue, struct dpni_queue_id *qid) { @@ -7467,7 +8320,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_queue *cmd_params; struct dpni_rsp_get_queue *rsp_params; int err; -@@ -1463,6 +1840,8 @@ int dpni_get_queue(struct fsl_mc_io *mc_ +@@ -1463,6 +1804,8 @@ int dpni_get_queue(struct fsl_mc_io *mc_ * @token: Token of DPNI object * @page: Selects the statistics page to retrieve, see * DPNI_GET_STATISTICS output. Pages are numbered 0 to 2. @@ -7476,7 +8329,7 @@ Signed-off-by: Biwen Li * @stat: Structure containing the statistics * * Return: '0' on Success; Error code otherwise. -@@ -1471,9 +1850,10 @@ int dpni_get_statistics(struct fsl_mc_io +@@ -1471,9 +1814,10 @@ int dpni_get_statistics(struct fsl_mc_io u32 cmd_flags, u16 token, u8 page, @@ -7488,7 +8341,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_statistics *cmd_params; struct dpni_rsp_get_statistics *rsp_params; int i, err; -@@ -1484,6 +1864,7 @@ int dpni_get_statistics(struct fsl_mc_io +@@ -1484,6 +1828,7 @@ int dpni_get_statistics(struct fsl_mc_io token); cmd_params = (struct dpni_cmd_get_statistics *)cmd.params; cmd_params->page_number = page; @@ -7496,7 +8349,7 @@ Signed-off-by: Biwen Li /* send command to mc */ err = mc_send_command(mc_io, &cmd); -@@ -1499,6 +1880,29 @@ int dpni_get_statistics(struct fsl_mc_io +@@ -1499,6 +1844,29 @@ int dpni_get_statistics(struct fsl_mc_io } /** @@ -7526,7 +8379,7 @@ Signed-off-by: Biwen Li * dpni_set_taildrop() - Set taildrop per queue or TC * @mc_io: Pointer to MC portal's I/O object * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' -@@ -1506,7 +1910,10 @@ int dpni_get_statistics(struct fsl_mc_io +@@ -1506,7 +1874,10 @@ int dpni_get_statistics(struct fsl_mc_io * @cg_point: Congestion point * @q_type: Queue type on which the taildrop is configured. * Only Rx queues are supported for now @@ -7538,7 +8391,7 @@ Signed-off-by: Biwen Li * @q_index: Index of the queue if the DPNI supports multiple queues for * traffic distribution. Ignored if CONGESTION_POINT is not 0. * @taildrop: Taildrop structure -@@ -1522,7 +1929,7 @@ int dpni_set_taildrop(struct fsl_mc_io * +@@ -1522,7 +1893,7 @@ int dpni_set_taildrop(struct fsl_mc_io * u8 index, struct dpni_taildrop *taildrop) { @@ -7547,7 +8400,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_set_taildrop *cmd_params; /* prepare command */ -@@ -1550,7 +1957,10 @@ int dpni_set_taildrop(struct fsl_mc_io * +@@ -1550,7 +1921,10 @@ int dpni_set_taildrop(struct fsl_mc_io * * @cg_point: Congestion point * @q_type: Queue type on which the taildrop is configured. * Only Rx queues are supported for now @@ -7559,7 +8412,7 @@ Signed-off-by: Biwen Li * @q_index: Index of the queue if the DPNI supports multiple queues for * traffic distribution. Ignored if CONGESTION_POINT is not 0. * @taildrop: Taildrop structure -@@ -1566,7 +1976,7 @@ int dpni_get_taildrop(struct fsl_mc_io * +@@ -1566,7 +1940,7 @@ int dpni_get_taildrop(struct fsl_mc_io * u8 index, struct dpni_taildrop *taildrop) { @@ -7568,7 +8421,7 @@ Signed-off-by: Biwen Li struct dpni_cmd_get_taildrop *cmd_params; struct dpni_rsp_get_taildrop *rsp_params; int err; -@@ -1594,3 +2004,109 @@ int dpni_get_taildrop(struct fsl_mc_io * +@@ -1594,3 +1968,187 @@ int dpni_get_taildrop(struct fsl_mc_io * return 0; } @@ -7636,11 +8489,11 @@ Signed-off-by: Biwen Li + cmd_flags, + token); + cmd_params = (struct dpni_cmd_set_rx_fs_dist *)cmd.params; -+ cmd_params->dist_size = le16_to_cpu(cfg->dist_size); ++ cmd_params->dist_size = cpu_to_le16(cfg->dist_size); + dpni_set_field(cmd_params->enable, RX_FS_DIST_ENABLE, cfg->enable); + cmd_params->tc = cfg->tc; -+ cmd_params->miss_flow_id = le16_to_cpu(cfg->fs_miss_flow_id); -+ cmd_params->key_cfg_iova = le64_to_cpu(cfg->key_cfg_iova); ++ cmd_params->miss_flow_id = cpu_to_le16(cfg->fs_miss_flow_id); ++ cmd_params->key_cfg_iova = cpu_to_le64(cfg->key_cfg_iova); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); @@ -7670,17 +8523,131 @@ Signed-off-by: Biwen Li + cmd_flags, + token); + cmd_params = (struct dpni_cmd_set_rx_hash_dist *)cmd.params; -+ cmd_params->dist_size = le16_to_cpu(cfg->dist_size); ++ cmd_params->dist_size = cpu_to_le16(cfg->dist_size); + dpni_set_field(cmd_params->enable, RX_FS_DIST_ENABLE, cfg->enable); + cmd_params->tc = cfg->tc; -+ cmd_params->key_cfg_iova = le64_to_cpu(cfg->key_cfg_iova); ++ cmd_params->key_cfg_iova = cpu_to_le64(cfg->key_cfg_iova); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++/** ++ * dpni_add_fs_entry() - Add Flow Steering entry for a specific traffic class ++ * (to select a flow ID) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @index: Location in the QoS table where to insert the entry. ++ * Only relevant if MASKING is enabled for QoS ++ * classification on this DPNI, it is ignored for exact match. ++ * @cfg: Flow steering rule to add ++ * @action: Action to be taken as result of a classification hit ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_add_fs_entry(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ u8 tc_id, ++ u16 index, ++ const struct dpni_rule_cfg *cfg, ++ const struct dpni_fs_action_cfg *action) ++{ ++ struct dpni_cmd_add_fs_entry *cmd_params; ++ struct fsl_mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ADD_FS_ENT, ++ cmd_flags, ++ token); ++ cmd_params = (struct dpni_cmd_add_fs_entry *)cmd.params; ++ cmd_params->tc_id = tc_id; ++ cmd_params->key_size = cfg->key_size; ++ cmd_params->index = cpu_to_le16(index); ++ cmd_params->key_iova = cpu_to_le64(cfg->key_iova); ++ cmd_params->mask_iova = cpu_to_le64(cfg->mask_iova); ++ cmd_params->options = cpu_to_le16(action->options); ++ cmd_params->flow_id = cpu_to_le16(action->flow_id); ++ cmd_params->flc = cpu_to_le64(action->flc); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++/** ++ * dpni_remove_fs_entry() - Remove Flow Steering entry from a specific ++ * traffic class ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: Flow steering rule to remove ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ u8 tc_id, ++ const struct dpni_rule_cfg *cfg) ++{ ++ struct dpni_cmd_remove_fs_entry *cmd_params; ++ struct fsl_mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_REMOVE_FS_ENT, ++ cmd_flags, ++ token); ++ cmd_params = (struct dpni_cmd_remove_fs_entry *)cmd.params; ++ cmd_params->tc_id = tc_id; ++ cmd_params->key_size = cfg->key_size; ++ cmd_params->key_iova = cpu_to_le64(cfg->key_iova); ++ cmd_params->mask_iova = cpu_to_le64(cfg->mask_iova); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} --- a/drivers/staging/fsl-dpaa2/ethernet/dpni.h +++ b/drivers/staging/fsl-dpaa2/ethernet/dpni.h -@@ -52,6 +52,14 @@ struct fsl_mc_io; +@@ -1,34 +1,6 @@ ++/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ + /* Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2016 NXP +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of the above-listed copyright holders nor the +- * names of any contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE +- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +- * POSSIBILITY OF SUCH DAMAGE. + */ + #ifndef __FSL_DPNI_H + #define __FSL_DPNI_H +@@ -52,6 +24,14 @@ struct fsl_mc_io; * Maximum number of buffer pools per DPNI */ #define DPNI_MAX_DPBP 8 @@ -7695,7 +8662,7 @@ Signed-off-by: Biwen Li /** * All traffic classes considered; see dpni_set_queue() -@@ -123,13 +131,15 @@ struct dpni_pools_cfg { +@@ -123,13 +103,15 @@ struct dpni_pools_cfg { /** * struct pools - Buffer pools parameters * @dpbp_id: DPBP object ID @@ -7713,7 +8680,7 @@ Signed-off-by: Biwen Li } pools[DPNI_MAX_DPBP]; }; -@@ -476,6 +486,24 @@ union dpni_statistics { +@@ -476,6 +458,24 @@ union dpni_statistics { u64 egress_confirmed_frames; } page_2; /** @@ -7738,7 +8705,7 @@ Signed-off-by: Biwen Li * struct raw - raw statistics structure */ struct { -@@ -487,8 +515,13 @@ int dpni_get_statistics(struct fsl_mc_io +@@ -487,8 +487,13 @@ int dpni_get_statistics(struct fsl_mc_io u32 cmd_flags, u16 token, u8 page, @@ -7752,7 +8719,7 @@ Signed-off-by: Biwen Li /** * Enable auto-negotiation */ -@@ -505,6 +538,10 @@ int dpni_get_statistics(struct fsl_mc_io +@@ -505,6 +510,23 @@ int dpni_get_statistics(struct fsl_mc_io * Enable a-symmetric pause frames */ #define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL @@ -7760,13 +8727,62 @@ Signed-off-by: Biwen Li + * Enable priority flow control pause frames + */ +#define DPNI_LINK_OPT_PFC_PAUSE 0x0000000000000010ULL ++/** ++ * Advertised link speeds ++ */ ++#define DPNI_ADVERTISED_10BASET_FULL 0x0000000000000001ULL ++#define DPNI_ADVERTISED_100BASET_FULL 0x0000000000000002ULL ++#define DPNI_ADVERTISED_1000BASET_FULL 0x0000000000000004ULL ++#define DPNI_ADVERTISED_10000BASET_FULL 0x0000000000000010ULL ++#define DPNI_ADVERTISED_2500BASEX_FULL 0x0000000000000020ULL ++ ++/** ++ * Advertise auto-negotiation enabled ++ */ ++#define DPNI_ADVERTISED_AUTONEG 0x0000000000000008ULL /** * struct - Structure representing DPNI link configuration -@@ -538,6 +575,23 @@ int dpni_get_link_state(struct fsl_mc_io +@@ -514,6 +536,7 @@ int dpni_get_statistics(struct fsl_mc_io + struct dpni_link_cfg { + u32 rate; + u64 options; ++ u64 advertising; + }; + + int dpni_set_link_cfg(struct fsl_mc_io *mc_io, +@@ -521,6 +544,11 @@ int dpni_set_link_cfg(struct fsl_mc_io + u16 token, + const struct dpni_link_cfg *cfg); + ++int dpni_set_link_cfg_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ const struct dpni_link_cfg *cfg); ++ + /** + * struct dpni_link_state - Structure representing DPNI link state + * @rate: Rate +@@ -530,7 +558,10 @@ int dpni_set_link_cfg(struct fsl_mc_io + struct dpni_link_state { + u32 rate; + u64 options; ++ u64 supported; ++ u64 advertising; + int up; ++ int state_valid; + }; + + int dpni_get_link_state(struct fsl_mc_io *mc_io, +@@ -538,6 +569,28 @@ int dpni_get_link_state(struct fsl_mc_io u16 token, struct dpni_link_state *state); ++int dpni_get_link_state_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpni_link_state *state); ++ +/** + * struct dpni_tx_shaping - Structure representing DPNI tx shaping configuration + * @rate_limit: rate in Mbps @@ -7787,7 +8803,7 @@ Signed-off-by: Biwen Li int dpni_set_max_frame_length(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, -@@ -639,6 +693,70 @@ int dpni_prepare_key_cfg(const struct dp +@@ -639,6 +692,70 @@ int dpni_prepare_key_cfg(const struct dp u8 *key_cfg_buf); /** @@ -7858,7 +8874,7 @@ Signed-off-by: Biwen Li * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration * @dist_size: Set the distribution size; * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96, -@@ -784,6 +902,108 @@ enum dpni_congestion_point { +@@ -784,6 +901,108 @@ enum dpni_congestion_point { }; /** @@ -7967,7 +8983,7 @@ Signed-off-by: Biwen Li * struct dpni_taildrop - Structure representing the taildrop * @enable: Indicates whether the taildrop is active or not. * @units: Indicates the unit of THRESHOLD. Queue taildrop only supports -@@ -829,4 +1049,124 @@ struct dpni_rule_cfg { +@@ -829,4 +1048,124 @@ struct dpni_rule_cfg { u8 key_size; }; @@ -8092,3 +9108,40 @@ Signed-off-by: Biwen Li + const struct dpni_rx_dist_cfg *cfg); + #endif /* __FSL_DPNI_H */ +--- a/drivers/staging/fsl-dpaa2/ethernet/net.h ++++ b/drivers/staging/fsl-dpaa2/ethernet/net.h +@@ -1,33 +1,5 @@ ++/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ + /* Copyright 2013-2015 Freescale Semiconductor Inc. +- * +- * Redistribution and use in source and binary forms, with or without +- * modification, are permitted provided that the following conditions are met: +- * * Redistributions of source code must retain the above copyright +- * notice, this list of conditions and the following disclaimer. +- * * Redistributions in binary form must reproduce the above copyright +- * notice, this list of conditions and the following disclaimer in the +- * documentation and/or other materials provided with the distribution. +- * * Neither the name of the above-listed copyright holders nor the +- * names of any contributors may be used to endorse or promote products +- * derived from this software without specific prior written permission. +- * +- * +- * ALTERNATIVELY, this software may be distributed under the terms of the +- * GNU General Public License ("GPL") as published by the Free Software +- * Foundation, either version 2 of that License or (at your option) any +- * later version. +- * +- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE +- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +- * POSSIBILITY OF SUCH DAMAGE. + */ + #ifndef __FSL_NET_H + #define __FSL_NET_H diff --git a/target/linux/layerscape/patches-4.14/703-dpaa2-l2switch-support-layerscape.patch b/target/linux/layerscape/patches-4.14/703-dpaa2-l2switch-support-layerscape.patch index ae91fc363b..c188e6d3dd 100644 --- a/target/linux/layerscape/patches-4.14/703-dpaa2-l2switch-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/703-dpaa2-l2switch-support-layerscape.patch @@ -1,15 +1,15 @@ -From bdb1d42c9398eb14e997e026bd46602543a7ed03 Mon Sep 17 00:00:00 2001 +From 1c96e22d28e1b18c41c71e7d0948378561a6526f Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:16 +0800 -Subject: [PATCH 09/40] dpaa2-l2switch: support layerscape -This is an integrated patch of dpaa2-l2switch for - layerscape +Date: Wed, 17 Apr 2019 18:58:29 +0800 +Subject: [PATCH] dpaa2-l2switch: support layerscape +This is an integrated patch of dpaa2-l2switch for layerscape + +Signed-off-by: Biwen Li Signed-off-by: Greg Kroah-Hartman Signed-off-by: Guanhua Gao Signed-off-by: Ioana Ciornei Signed-off-by: Razvan Stefanescu -Signed-off-by: Biwen Li --- drivers/staging/fsl-dpaa2/ethsw/Makefile | 10 + drivers/staging/fsl-dpaa2/ethsw/README | 106 ++ diff --git a/target/linux/layerscape/patches-4.14/704-dpaa2-mac-phy-support-layerscape.patch b/target/linux/layerscape/patches-4.14/704-dpaa2-mac-phy-support-layerscape.patch index d76c5abe51..f36da51fff 100644 --- a/target/linux/layerscape/patches-4.14/704-dpaa2-mac-phy-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/704-dpaa2-mac-phy-support-layerscape.patch @@ -1,28 +1,33 @@ -From 92cf25fe454dd42136e717ba679a9dba740db0e7 Mon Sep 17 00:00:00 2001 +From dd0cc8d0739a72ee5d85039a9ba7812383e8f555 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:18 +0800 -Subject: [PATCH 10/40] dpaa2-mac-phy: support layerscape -This is an integrated patch of dpaa2-mac-phy for - layerscape +Date: Wed, 17 Apr 2019 18:58:30 +0800 +Subject: [PATCH] dpaa2-mac-phy: support layerscape + +This is an integrated patch of dpaa2-mac-phy for layerscape Signed-off-by: Alex Marginean +Signed-off-by: Biwen Li Signed-off-by: Bogdan Hamciuc Signed-off-by: Bogdan Purcareata +Signed-off-by: Catalin Neacsu Signed-off-by: Constantin Tudor +Signed-off-by: Florin Chiculita +Signed-off-by: Ioana Ciornei Signed-off-by: Ioana Radulescu Signed-off-by: Itai Katz Signed-off-by: J. German Rivera +Signed-off-by: Pankaj Bansal Signed-off-by: Razvan Stefanescu Signed-off-by: Stuart Yoder -Signed-off-by: Biwen Li +Signed-off-by: Valentin Catalin Neacsu --- drivers/staging/fsl-dpaa2/mac/Kconfig | 23 + drivers/staging/fsl-dpaa2/mac/Makefile | 10 + - drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h | 172 ++++++ - drivers/staging/fsl-dpaa2/mac/dpmac.c | 619 ++++++++++++++++++++ - drivers/staging/fsl-dpaa2/mac/dpmac.h | 342 +++++++++++ - drivers/staging/fsl-dpaa2/mac/mac.c | 672 ++++++++++++++++++++++ - 6 files changed, 1838 insertions(+) + drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h | 196 ++++++ + drivers/staging/fsl-dpaa2/mac/dpmac.c | 689 ++++++++++++++++++ + drivers/staging/fsl-dpaa2/mac/dpmac.h | 374 ++++++++++ + drivers/staging/fsl-dpaa2/mac/mac.c | 817 ++++++++++++++++++++++ + 6 files changed, 2109 insertions(+) create mode 100644 drivers/staging/fsl-dpaa2/mac/Kconfig create mode 100644 drivers/staging/fsl-dpaa2/mac/Makefile create mode 100644 drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h @@ -71,7 +76,7 @@ Signed-off-by: Biwen Li + make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean --- /dev/null +++ b/drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h -@@ -0,0 +1,172 @@ +@@ -0,0 +1,196 @@ +/* Copyright 2013-2016 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -110,9 +115,11 @@ Signed-off-by: Biwen Li +#define DPMAC_VER_MAJOR 4 +#define DPMAC_VER_MINOR 2 +#define DPMAC_CMD_BASE_VERSION 1 ++#define DPMAC_CMD_2ND_VERSION 2 +#define DPMAC_CMD_ID_OFFSET 4 + +#define DPMAC_CMD(id) (((id) << DPMAC_CMD_ID_OFFSET) | DPMAC_CMD_BASE_VERSION) ++#define DPMAC_CMD_V2(id) (((id) << DPMAC_CMD_ID_OFFSET) | DPMAC_CMD_2ND_VERSION) + +/* Command IDs */ +#define DPMAC_CMDID_CLOSE DPMAC_CMD(0x800) @@ -132,7 +139,9 @@ Signed-off-by: Biwen Li +#define DPMAC_CMDID_CLEAR_IRQ_STATUS DPMAC_CMD(0x017) + +#define DPMAC_CMDID_GET_LINK_CFG DPMAC_CMD(0x0c2) ++#define DPMAC_CMDID_GET_LINK_CFG_V2 DPMAC_CMD_V2(0x0c2) +#define DPMAC_CMDID_SET_LINK_STATE DPMAC_CMD(0x0c3) ++#define DPMAC_CMDID_SET_LINK_STATE_V2 DPMAC_CMD_V2(0x0c3) +#define DPMAC_CMDID_GET_COUNTER DPMAC_CMD(0x0c4) + +#define DPMAC_CMDID_SET_PORT_MAC_ADDR DPMAC_CMD(0x0c5) @@ -213,8 +222,17 @@ Signed-off-by: Biwen Li + u32 rate; +}; + ++struct dpmac_rsp_get_link_cfg_v2 { ++ u64 options; ++ u32 rate; ++ u32 pad; ++ u64 advertising; ++}; ++ +#define DPMAC_STATE_SIZE 1 +#define DPMAC_STATE_SHIFT 0 ++#define DPMAC_STATE_VALID_SIZE 1 ++#define DPMAC_STATE_VALID_SHIFT 1 + +struct dpmac_cmd_set_link_state { + u64 options; @@ -224,6 +242,17 @@ Signed-off-by: Biwen Li + u8 up; +}; + ++struct dpmac_cmd_set_link_state_v2 { ++ u64 options; ++ u32 rate; ++ u32 pad0; ++ /* from lsb: up:1, state_valid:1 */ ++ u8 state; ++ u8 pad1[7]; ++ u64 supported; ++ u64 advertising; ++}; ++ +struct dpmac_cmd_get_counter { + u8 type; +}; @@ -246,7 +275,7 @@ Signed-off-by: Biwen Li +#endif /* _FSL_DPMAC_CMD_H */ --- /dev/null +++ b/drivers/staging/fsl-dpaa2/mac/dpmac.c -@@ -0,0 +1,619 @@ +@@ -0,0 +1,689 @@ +/* Copyright 2013-2016 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -741,6 +770,42 @@ Signed-off-by: Biwen Li +} + +/** ++ * dpmac_get_link_cfg_v2() - Get Ethernet link configuration ++ * @mc_io: Pointer to opaque I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @cfg: Returned structure with the link configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_get_link_cfg_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpmac_link_cfg *cfg) ++{ ++ struct dpmac_rsp_get_link_cfg_v2 *rsp_params; ++ struct fsl_mc_command cmd = { 0 }; ++ int err = 0; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_LINK_CFG_V2, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ rsp_params = (struct dpmac_rsp_get_link_cfg_v2 *)cmd.params; ++ cfg->options = le64_to_cpu(rsp_params->options); ++ cfg->rate = le32_to_cpu(rsp_params->rate); ++ cfg->advertising = le64_to_cpu(rsp_params->advertising); ++ ++ return 0; ++} ++ ++/** + * dpmac_set_link_state() - Set the Ethernet link status + * @mc_io: Pointer to opaque I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' @@ -764,7 +829,41 @@ Signed-off-by: Biwen Li + cmd_params = (struct dpmac_cmd_set_link_state *)cmd.params; + cmd_params->options = cpu_to_le64(link_state->options); + cmd_params->rate = cpu_to_le32(link_state->rate); -+ cmd_params->up = dpmac_get_field(link_state->up, STATE); ++ dpmac_set_field(cmd_params->up, STATE, link_state->up); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++/** ++ * dpmac_set_link_state_v2() - Set the Ethernet link status ++ * @mc_io: Pointer to opaque I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @link_state: Link state configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_set_link_state_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpmac_link_state *link_state) ++{ ++ struct dpmac_cmd_set_link_state_v2 *cmd_params; ++ struct fsl_mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_LINK_STATE_V2, ++ cmd_flags, ++ token); ++ cmd_params = (struct dpmac_cmd_set_link_state_v2 *)cmd.params; ++ cmd_params->options = cpu_to_le64(link_state->options); ++ cmd_params->rate = cpu_to_le32(link_state->rate); ++ dpmac_set_field(cmd_params->state, STATE, link_state->up); ++ dpmac_set_field(cmd_params->state, STATE_VALID, ++ link_state->state_valid); ++ cmd_params->supported = cpu_to_le64(link_state->supported); ++ cmd_params->advertising = cpu_to_le64(link_state->advertising); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); @@ -868,7 +967,7 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl-dpaa2/mac/dpmac.h -@@ -0,0 +1,342 @@ +@@ -0,0 +1,374 @@ +/* Copyright 2013-2016 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -1073,13 +1172,29 @@ Signed-off-by: Biwen Li +#define DPMAC_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL + +/** ++ * Advertised link speeds ++ */ ++#define DPMAC_ADVERTISED_10BASET_FULL 0x0000000000000001ULL ++#define DPMAC_ADVERTISED_100BASET_FULL 0x0000000000000002ULL ++#define DPMAC_ADVERTISED_1000BASET_FULL 0x0000000000000004ULL ++#define DPMAC_ADVERTISED_10000BASET_FULL 0x0000000000000010ULL ++#define DPMAC_ADVERTISED_2500BASEX_FULL 0x0000000000000020ULL ++ ++/** ++ * Advertise auto-negotiation enable ++ */ ++#define DPMAC_ADVERTISED_AUTONEG 0x0000000000000008ULL ++ ++/** + * struct dpmac_link_cfg - Structure representing DPMAC link configuration + * @rate: Link's rate - in Mbps + * @options: Enable/Disable DPMAC link cfg features (bitmap) ++ * @advertising: Speeds that are advertised for autoneg (bitmap) + */ +struct dpmac_link_cfg { + u32 rate; + u64 options; ++ u64 advertising; +}; + +int dpmac_get_link_cfg(struct fsl_mc_io *mc_io, @@ -1087,16 +1202,27 @@ Signed-off-by: Biwen Li + u16 token, + struct dpmac_link_cfg *cfg); + ++int dpmac_get_link_cfg_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpmac_link_cfg *cfg); ++ +/** + * struct dpmac_link_state - DPMAC link configuration request + * @rate: Rate in Mbps + * @options: Enable/Disable DPMAC link cfg features (bitmap) + * @up: Link state ++ * @state_valid: Ignore/Update the state of the link ++ * @supported: Speeds capability of the phy (bitmap) ++ * @advertising: Speeds that are advertised for autoneg (bitmap) + */ +struct dpmac_link_state { + u32 rate; + u64 options; + int up; ++ int state_valid; ++ u64 supported; ++ u64 advertising; +}; + +int dpmac_set_link_state(struct fsl_mc_io *mc_io, @@ -1104,6 +1230,11 @@ Signed-off-by: Biwen Li + u16 token, + struct dpmac_link_state *link_state); + ++int dpmac_set_link_state_v2(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpmac_link_state *link_state); ++ +/** + * enum dpmac_counter - DPMAC counter types + * @DPMAC_CNT_ING_FRAME_64: counts 64-bytes frames, good or bad. @@ -1213,8 +1344,9 @@ Signed-off-by: Biwen Li +#endif /* __FSL_DPMAC_H */ --- /dev/null +++ b/drivers/staging/fsl-dpaa2/mac/mac.c -@@ -0,0 +1,672 @@ +@@ -0,0 +1,817 @@ +/* Copyright 2015 Freescale Semiconductor Inc. ++ * Copyright 2018 NXP + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: @@ -1272,6 +1404,8 @@ Signed-off-by: Biwen Li + struct fsl_mc_device *mc_dev; + struct dpmac_attr attr; + struct dpmac_link_state old_state; ++ u16 dpmac_ver_major; ++ u16 dpmac_ver_minor; +}; + +/* TODO: fix the 10G modes, mapping can't be right: @@ -1292,8 +1426,62 @@ Signed-off-by: Biwen Li + PHY_INTERFACE_MODE_QSGMII, /* DPMAC_ETH_IF_QSGMII */ + PHY_INTERFACE_MODE_XGMII, /* DPMAC_ETH_IF_XAUI */ + PHY_INTERFACE_MODE_XGMII, /* DPMAC_ETH_IF_XFI */ ++ PHY_INTERFACE_MODE_XGMII, /* DPMAC_ETH_IF_CAUI */ ++ PHY_INTERFACE_MODE_XGMII, /* DPMAC_ETH_IF_1000BASEX */ ++ PHY_INTERFACE_MODE_XGMII, /* DPMAC_ETH_IF_USXGMII */ +}; + ++static int cmp_dpmac_ver(struct dpaa2_mac_priv *priv, ++ u16 ver_major, u16 ver_minor) ++{ ++ if (priv->dpmac_ver_major == ver_major) ++ return priv->dpmac_ver_minor - ver_minor; ++ return priv->dpmac_ver_major - ver_major; ++} ++ ++#define DPMAC_LINK_AUTONEG_VER_MAJOR 4 ++#define DPMAC_LINK_AUTONEG_VER_MINOR 3 ++ ++struct dpaa2_mac_link_mode_map { ++ u64 dpmac_lm; ++ u64 ethtool_lm; ++}; ++ ++static const struct dpaa2_mac_link_mode_map dpaa2_mac_lm_map[] = { ++ {DPMAC_ADVERTISED_10BASET_FULL, ETHTOOL_LINK_MODE_10baseT_Full_BIT}, ++ {DPMAC_ADVERTISED_100BASET_FULL, ETHTOOL_LINK_MODE_100baseT_Full_BIT}, ++ {DPMAC_ADVERTISED_1000BASET_FULL, ETHTOOL_LINK_MODE_1000baseT_Full_BIT}, ++ {DPMAC_ADVERTISED_10000BASET_FULL, ETHTOOL_LINK_MODE_10000baseT_Full_BIT}, ++ {DPMAC_ADVERTISED_2500BASEX_FULL, ETHTOOL_LINK_MODE_2500baseX_Full_BIT}, ++ {DPMAC_ADVERTISED_AUTONEG, ETHTOOL_LINK_MODE_Autoneg_BIT}, ++}; ++ ++static void link_mode_dpmac2phydev(u64 dpmac_lm, u32 *phydev_lm) ++{ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_mac_lm_map); i++) { ++ if (dpmac_lm & dpaa2_mac_lm_map[i].dpmac_lm) ++ __set_bit(dpaa2_mac_lm_map[i].ethtool_lm, mask); ++ } ++ ++ ethtool_convert_link_mode_to_legacy_u32(phydev_lm, mask); ++} ++ ++static void link_mode_phydev2dpmac(u32 phydev_lm, u64 *dpni_lm) ++{ ++ unsigned long lm; ++ int i; ++ ++ ethtool_convert_legacy_u32_to_link_mode(&lm, phydev_lm); ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_mac_lm_map); i++) { ++ if (test_bit(dpaa2_mac_lm_map[i].ethtool_lm, &lm)) ++ *dpni_lm |= dpaa2_mac_lm_map[i].dpmac_lm; ++ } ++} ++ +static void dpaa2_mac_link_changed(struct net_device *netdev) +{ + struct phy_device *phydev; @@ -1313,6 +1501,12 @@ Signed-off-by: Biwen Li + if (phydev->autoneg) + state.options |= DPMAC_LINK_OPT_AUTONEG; + ++ if (phydev->pause && (phydev->advertising & ADVERTISED_Pause)) ++ state.options |= DPMAC_LINK_OPT_PAUSE; ++ if (phydev->pause && ++ (phydev->advertising & ADVERTISED_Asym_Pause)) ++ state.options |= DPMAC_LINK_OPT_ASYM_PAUSE; ++ + netif_carrier_on(netdev); + } else { + netif_carrier_off(netdev); @@ -1325,11 +1519,18 @@ Signed-off-by: Biwen Li + phy_print_status(phydev); + } + -+ /* We must interrogate MC at all times, because we don't know -+ * when and whether a potential DPNI may have read the link state. -+ */ -+ err = dpmac_set_link_state(priv->mc_dev->mc_io, 0, -+ priv->mc_dev->mc_handle, &state); ++ if (cmp_dpmac_ver(priv, DPMAC_LINK_AUTONEG_VER_MAJOR, ++ DPMAC_LINK_AUTONEG_VER_MINOR) < 0) { ++ err = dpmac_set_link_state(priv->mc_dev->mc_io, 0, ++ priv->mc_dev->mc_handle, &state); ++ } else { ++ link_mode_phydev2dpmac(phydev->supported, &state.supported); ++ link_mode_phydev2dpmac(phydev->advertising, &state.advertising); ++ state.state_valid = 1; ++ ++ err = dpmac_set_link_state_v2(priv->mc_dev->mc_io, 0, ++ priv->mc_dev->mc_handle, &state); ++ } + if (unlikely(err)) + dev_err(&priv->mc_dev->dev, "dpmac_set_link_state: %d\n", err); +} @@ -1367,6 +1568,18 @@ Signed-off-by: Biwen Li + return NETDEV_TX_OK; +} + ++static void dpaa2_mac_get_drvinfo(struct net_device *net_dev, ++ struct ethtool_drvinfo *drvinfo) ++{ ++ struct dpaa2_mac_priv *priv = netdev_priv(net_dev); ++ ++ strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver)); ++ snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), ++ "%u.%u", priv->dpmac_ver_major, priv->dpmac_ver_minor); ++ strlcpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent), ++ sizeof(drvinfo->bus_info)); ++} ++ +static int dpaa2_mac_get_link_ksettings(struct net_device *netdev, + struct ethtool_link_ksettings *ks) +{ @@ -1536,6 +1749,7 @@ Signed-off-by: Biwen Li +}; + +static const struct ethtool_ops dpaa2_mac_ethtool_ops = { ++ .get_drvinfo = &dpaa2_mac_get_drvinfo, + .get_link_ksettings = &dpaa2_mac_get_link_ksettings, + .set_link_ksettings = &dpaa2_mac_set_link_ksettings, + .get_strings = &dpaa2_mac_get_strings, @@ -1555,11 +1769,30 @@ Signed-off-by: Biwen Li + phydev->speed = cfg->rate; + phydev->duplex = !!(cfg->options & DPMAC_LINK_OPT_HALF_DUPLEX); + ++ if (cfg->advertising != 0) { ++ phydev->advertising = 0; ++ link_mode_dpmac2phydev(cfg->advertising, &phydev->advertising); ++ } ++ ++ if (phydev->supported & SUPPORTED_Pause) { ++ if (cfg->options & DPMAC_LINK_OPT_PAUSE) ++ phydev->advertising |= ADVERTISED_Pause; ++ else ++ phydev->advertising &= ~ADVERTISED_Pause; ++ } ++ ++ if (phydev->supported & SUPPORTED_Asym_Pause) { ++ if (cfg->options & DPMAC_LINK_OPT_ASYM_PAUSE) ++ phydev->advertising |= ADVERTISED_Asym_Pause; ++ else ++ phydev->advertising &= ~ADVERTISED_Asym_Pause; ++ } ++ + if (cfg->options & DPMAC_LINK_OPT_AUTONEG) { -+ phydev->autoneg = 1; ++ phydev->autoneg = AUTONEG_ENABLE; + phydev->advertising |= ADVERTISED_Autoneg; + } else { -+ phydev->autoneg = 0; ++ phydev->autoneg = AUTONEG_DISABLE; + phydev->advertising &= ~ADVERTISED_Autoneg; + } + @@ -1571,7 +1804,7 @@ Signed-off-by: Biwen Li + struct device *dev = (struct device *)arg; + struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); + struct dpaa2_mac_priv *priv = dev_get_drvdata(dev); -+ struct dpmac_link_cfg link_cfg; ++ struct dpmac_link_cfg link_cfg = { 0 }; + u32 status; + int err; + @@ -1582,8 +1815,14 @@ Signed-off-by: Biwen Li + + /* DPNI-initiated link configuration; 'ifconfig up' also calls this */ + if (status & DPMAC_IRQ_EVENT_LINK_CFG_REQ) { -+ err = dpmac_get_link_cfg(mc_dev->mc_io, 0, mc_dev->mc_handle, -+ &link_cfg); ++ if (cmp_dpmac_ver(priv, DPMAC_LINK_AUTONEG_VER_MAJOR, ++ DPMAC_LINK_AUTONEG_VER_MINOR) < 0) ++ err = dpmac_get_link_cfg(mc_dev->mc_io, 0, ++ mc_dev->mc_handle, &link_cfg); ++ else ++ err = dpmac_get_link_cfg_v2(mc_dev->mc_io, 0, ++ mc_dev->mc_handle, ++ &link_cfg); + if (unlikely(err)) + goto out; + @@ -1682,7 +1921,7 @@ Signed-off-by: Biwen Li + struct dpaa2_mac_priv *priv = NULL; + struct device_node *phy_node, *dpmac_node; + struct net_device *netdev; -+ phy_interface_t if_mode; ++ int if_mode; + int err = 0; + + dev = &mc_dev->dev; @@ -1723,6 +1962,21 @@ Signed-off-by: Biwen Li + goto err_free_mcp; + } + ++ err = dpmac_get_api_version(mc_dev->mc_io, 0, &priv->dpmac_ver_major, ++ &priv->dpmac_ver_minor); ++ if (err) { ++ dev_err(dev, "dpmac_get_api_version failed\n"); ++ goto err_version; ++ } ++ ++ if (cmp_dpmac_ver(priv, DPMAC_VER_MAJOR, DPMAC_VER_MINOR) < 0) { ++ dev_err(dev, "DPMAC version %u.%u lower than supported %u.%u\n", ++ priv->dpmac_ver_major, priv->dpmac_ver_minor, ++ DPMAC_VER_MAJOR, DPMAC_VER_MINOR); ++ err = -ENOTSUPP; ++ goto err_version; ++ } ++ + err = dpmac_get_attributes(mc_dev->mc_io, 0, + mc_dev->mc_handle, &priv->attr); + if (err) { @@ -1761,12 +2015,12 @@ Signed-off-by: Biwen Li + } +#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */ + -+ /* probe the PHY as a fixed-link if there's a phy-handle defined -+ * in the device tree -+ */ -+ phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0); -+ if (!phy_node) { -+ goto probe_fixed_link; ++ /* get the interface mode from the dpmac of node or from the MC attributes */ ++ if_mode = of_get_phy_mode(dpmac_node); ++ if (if_mode >= 0) { ++ dev_dbg(dev, "\tusing if mode %s for eth_if %d\n", ++ phy_modes(if_mode), priv->attr.eth_if); ++ goto link_type; + } + + if (priv->attr.eth_if < ARRAY_SIZE(dpaa2_mac_iface_mode)) { @@ -1774,8 +2028,20 @@ Signed-off-by: Biwen Li + dev_dbg(dev, "\tusing if mode %s for eth_if %d\n", + phy_modes(if_mode), priv->attr.eth_if); + } else { -+ dev_warn(dev, "Unexpected interface mode %d, will probe as fixed link\n", -+ priv->attr.eth_if); ++ dev_err(dev, "Unexpected interface mode %d\n", ++ priv->attr.eth_if); ++ err = -EINVAL; ++ goto err_no_if_mode; ++ } ++ ++link_type: ++ /* probe the PHY as fixed-link if the DPMAC attribute indicates so */ ++ if (priv->attr.link_type == DPMAC_LINK_TYPE_FIXED) ++ goto probe_fixed_link; ++ ++ /* or if there's no phy-handle defined in the device tree */ ++ phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0); ++ if (!phy_node) { + goto probe_fixed_link; + } + @@ -1812,6 +2078,14 @@ Signed-off-by: Biwen Li + err = -EFAULT; + goto err_no_phy; + } ++ ++ err = phy_connect_direct(netdev, netdev->phydev, ++ &dpaa2_mac_link_changed, if_mode); ++ if (err) { ++ dev_err(dev, "error trying to connect to PHY\n"); ++ goto err_no_phy; ++ } ++ + dev_info(dev, "Registered fixed PHY.\n"); + } + @@ -1819,6 +2093,7 @@ Signed-off-by: Biwen Li + + return 0; + ++err_no_if_mode: +err_defer: +err_no_phy: +#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS @@ -1826,6 +2101,7 @@ Signed-off-by: Biwen Li +err_free_irq: +#endif + teardown_irqs(mc_dev); ++err_version: +err_close: + dpmac_close(mc_dev->mc_io, 0, mc_dev->mc_handle); +err_free_mcp: diff --git a/target/linux/layerscape/patches-4.14/705-dpaa2-rtc-support-layerscape.patch b/target/linux/layerscape/patches-4.14/705-dpaa2-rtc-support-layerscape.patch index de6816b582..3b3ffe9647 100644 --- a/target/linux/layerscape/patches-4.14/705-dpaa2-rtc-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/705-dpaa2-rtc-support-layerscape.patch @@ -1,30 +1,34 @@ -From 579f1f6767b1008c6e5ccc2b029acbb56002ed8b Mon Sep 17 00:00:00 2001 +From 802238feea29ddfb765fc0c162e0de34920cd58d Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:20 +0800 -Subject: [PATCH 11/40] dpaa2-rtc: support layerscape +Date: Wed, 17 Apr 2019 18:58:31 +0800 +Subject: [PATCH] dpaa2-rtc: support layerscape + This is an integrated patch of dpaa2-rtc for layerscape +Signed-off-by: Biwen Li Signed-off-by: Catalin Horghidan +Signed-off-by: Greg Kroah-Hartman Signed-off-by: Yangbo Lu -Signed-off-by: Biwen Li --- drivers/staging/fsl-dpaa2/rtc/Makefile | 10 + drivers/staging/fsl-dpaa2/rtc/dprtc-cmd.h | 160 +++++ drivers/staging/fsl-dpaa2/rtc/dprtc.c | 746 ++++++++++++++++++++++ drivers/staging/fsl-dpaa2/rtc/dprtc.h | 172 +++++ - drivers/staging/fsl-dpaa2/rtc/rtc.c | 242 +++++++ - 5 files changed, 1330 insertions(+) + drivers/staging/fsl-dpaa2/rtc/rtc.c | 240 +++++++ + drivers/staging/fsl-dpaa2/rtc/rtc.h | 14 + + 6 files changed, 1342 insertions(+) create mode 100644 drivers/staging/fsl-dpaa2/rtc/Makefile create mode 100644 drivers/staging/fsl-dpaa2/rtc/dprtc-cmd.h create mode 100644 drivers/staging/fsl-dpaa2/rtc/dprtc.c create mode 100644 drivers/staging/fsl-dpaa2/rtc/dprtc.h create mode 100644 drivers/staging/fsl-dpaa2/rtc/rtc.c + create mode 100644 drivers/staging/fsl-dpaa2/rtc/rtc.h --- /dev/null +++ b/drivers/staging/fsl-dpaa2/rtc/Makefile @@ -0,0 +1,10 @@ + -+obj-$(CONFIG_PTP_1588_CLOCK_DPAA2) += dpaa2-rtc.o ++obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += dpaa2-rtc.o + +dpaa2-rtc-objs := rtc.o dprtc.o + @@ -1122,7 +1126,7 @@ Signed-off-by: Biwen Li +#endif /* __FSL_DPRTC_H */ --- /dev/null +++ b/drivers/staging/fsl-dpaa2/rtc/rtc.c -@@ -0,0 +1,242 @@ +@@ -0,0 +1,240 @@ +/* Copyright 2013-2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -1160,8 +1164,7 @@ Signed-off-by: Biwen Li + +#include + -+#include "dprtc.h" -+#include "dprtc-cmd.h" ++#include "rtc.h" + +#define N_EXT_TS 2 + @@ -1276,7 +1279,6 @@ Signed-off-by: Biwen Li +{ + struct device *dev; + int err = 0; -+ int dpaa2_phc_index; + u32 tmr_add = 0; + + if (!mc_dev) @@ -1365,3 +1367,20 @@ Signed-off-by: Biwen Li + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DPAA2 RTC (PTP 1588 clock) driver (prototype)"); +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/rtc/rtc.h +@@ -0,0 +1,14 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright 2018 NXP ++ */ ++ ++#ifndef __RTC_H ++#define __RTC_H ++ ++#include "dprtc.h" ++#include "dprtc-cmd.h" ++ ++extern int dpaa2_phc_index; ++ ++#endif diff --git a/target/linux/layerscape/patches-4.14/707-dpaa-ethernet-support-layerscape.patch b/target/linux/layerscape/patches-4.14/707-dpaa-ethernet-support-layerscape.patch index bd62bceca0..18d4e47e04 100644 --- a/target/linux/layerscape/patches-4.14/707-dpaa-ethernet-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/707-dpaa-ethernet-support-layerscape.patch @@ -1,307 +1,312 @@ -From 40b001913c4131b7532beacc13c811a9e39f3758 Mon Sep 17 00:00:00 2001 -From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:08 +0800 -Subject: [PATCH 13/40] dpaa-ethernet: support layerscape -This is an integrated patch of dpaa-ethernet for - layerscape +From b443452fe13292b12295757f57e04c04834b3fc0 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Wed, 22 May 2019 17:49:18 +0800 +Subject: [PATCH] dpaa-ethernet: support layerscape + +This is an integrated patch of dpaa-ethernet for layerscape Signed-off-by: Arnd Bergmann Signed-off-by: Bhaskar Upadhaya +Signed-off-by: Biwen Li Signed-off-by: Camelia Groza Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller Signed-off-by: Florian Fainelli -Signed-off-by: Gustavo A. R. Silva +Signed-off-by: Florinel Iordache Signed-off-by: Gustavo A. R. Silva Signed-off-by: Ioana Radulescu Signed-off-by: Iordache Florinel-R70177 Signed-off-by: Jake Moroni +Signed-off-by: Laurentiu Tudor Signed-off-by: Madalin Bucur Signed-off-by: Nipun Gupta Signed-off-by: Radu Bulie Signed-off-by: Roy Pledge +Signed-off-by: Vakul Garg Signed-off-by: Vicentiu Galanopulo Signed-off-by: Vladimir Oltean Signed-off-by: Wei Yongjun Signed-off-by: Yangbo Lu Signed-off-by: yuan linyu Signed-off-by: Zhao Qiang -Signed-off-by: Biwen Li --- - .../net/ethernet/freescale/dpaa/dpaa_eth.c | 399 +- - .../ethernet/freescale/dpaa/dpaa_ethtool.c | 2 +- - drivers/net/ethernet/freescale/fman/Kconfig | 1 - - drivers/net/ethernet/freescale/fman/Makefile | 12 +- - .../net/ethernet/freescale/fman/fman_dtsec.c | 19 + - .../net/ethernet/freescale/fman/fman_dtsec.h | 1 + - .../net/ethernet/freescale/fman/fman_memac.c | 32 +- - .../net/ethernet/freescale/fman/fman_memac.h | 1 + - .../net/ethernet/freescale/fman/fman_port.c | 2 + - .../net/ethernet/freescale/fman/fman_tgec.c | 33 +- - .../net/ethernet/freescale/fman/fman_tgec.h | 1 + - drivers/net/ethernet/freescale/fman/mac.c | 149 +- - drivers/net/ethernet/freescale/fman/mac.h | 8 +- - .../net/ethernet/freescale/sdk_dpaa/Kconfig | 195 + - .../net/ethernet/freescale/sdk_dpaa/Makefile | 46 + - .../ethernet/freescale/sdk_dpaa/dpaa_1588.c | 580 ++ - .../ethernet/freescale/sdk_dpaa/dpaa_1588.h | 138 + - .../freescale/sdk_dpaa/dpaa_debugfs.c | 180 + - .../freescale/sdk_dpaa/dpaa_debugfs.h | 43 + - .../ethernet/freescale/sdk_dpaa/dpaa_eth.c | 1223 +++ - .../ethernet/freescale/sdk_dpaa/dpaa_eth.h | 691 ++ - .../freescale/sdk_dpaa/dpaa_eth_base.c | 205 + - .../freescale/sdk_dpaa/dpaa_eth_base.h | 49 + - .../freescale/sdk_dpaa/dpaa_eth_ceetm.c | 2099 +++++ - .../freescale/sdk_dpaa/dpaa_eth_ceetm.h | 241 + - .../freescale/sdk_dpaa/dpaa_eth_common.c | 1776 ++++ - .../freescale/sdk_dpaa/dpaa_eth_common.h | 226 + - .../freescale/sdk_dpaa/dpaa_eth_proxy.c | 381 + - .../ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 1201 +++ - .../freescale/sdk_dpaa/dpaa_eth_sysfs.c | 278 + - .../freescale/sdk_dpaa/dpaa_eth_trace.h | 144 + - .../freescale/sdk_dpaa/dpaa_ethtool.c | 542 ++ - .../ethernet/freescale/sdk_dpaa/dpaa_ptp.c | 291 + - .../net/ethernet/freescale/sdk_dpaa/mac-api.c | 931 ++ - drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 489 ++ - drivers/net/ethernet/freescale/sdk_dpaa/mac.h | 135 + - .../freescale/sdk_dpaa/offline_port.c | 848 ++ - .../freescale/sdk_dpaa/offline_port.h | 59 + - .../net/ethernet/freescale/sdk_fman/Kconfig | 153 + - .../net/ethernet/freescale/sdk_fman/Makefile | 11 + - .../sdk_fman/Peripherals/FM/HC/Makefile | 15 + - .../freescale/sdk_fman/Peripherals/FM/HC/hc.c | 1232 +++ - .../sdk_fman/Peripherals/FM/MAC/Makefile | 28 + - .../sdk_fman/Peripherals/FM/MAC/dtsec.c | 1504 ++++ - .../sdk_fman/Peripherals/FM/MAC/dtsec.h | 228 + - .../Peripherals/FM/MAC/dtsec_mii_acc.c | 97 + - .../Peripherals/FM/MAC/dtsec_mii_acc.h | 42 + - .../sdk_fman/Peripherals/FM/MAC/fm_mac.c | 674 ++ - .../sdk_fman/Peripherals/FM/MAC/fm_mac.h | 226 + - .../sdk_fman/Peripherals/FM/MAC/fman_crc32.c | 119 + - .../sdk_fman/Peripherals/FM/MAC/fman_crc32.h | 43 + - .../sdk_fman/Peripherals/FM/MAC/fman_dtsec.c | 847 ++ - .../Peripherals/FM/MAC/fman_dtsec_mii_acc.c | 165 + - .../sdk_fman/Peripherals/FM/MAC/fman_memac.c | 532 ++ - .../Peripherals/FM/MAC/fman_memac_mii_acc.c | 215 + - .../sdk_fman/Peripherals/FM/MAC/fman_tgec.c | 367 + - .../sdk_fman/Peripherals/FM/MAC/memac.c | 1153 +++ - .../sdk_fman/Peripherals/FM/MAC/memac.h | 110 + - .../Peripherals/FM/MAC/memac_mii_acc.c | 78 + - .../Peripherals/FM/MAC/memac_mii_acc.h | 73 + - .../sdk_fman/Peripherals/FM/MAC/tgec.c | 1017 +++ - .../sdk_fman/Peripherals/FM/MAC/tgec.h | 151 + - .../Peripherals/FM/MAC/tgec_mii_acc.c | 139 + - .../Peripherals/FM/MAC/tgec_mii_acc.h | 80 + - .../sdk_fman/Peripherals/FM/MACSEC/Makefile | 15 + - .../Peripherals/FM/MACSEC/fm_macsec.c | 237 + - .../Peripherals/FM/MACSEC/fm_macsec.h | 203 + - .../Peripherals/FM/MACSEC/fm_macsec_guest.c | 59 + - .../Peripherals/FM/MACSEC/fm_macsec_master.c | 1031 +++ - .../Peripherals/FM/MACSEC/fm_macsec_master.h | 479 ++ - .../Peripherals/FM/MACSEC/fm_macsec_secy.c | 883 ++ - .../Peripherals/FM/MACSEC/fm_macsec_secy.h | 144 + - .../sdk_fman/Peripherals/FM/Makefile | 23 + - .../sdk_fman/Peripherals/FM/Pcd/Makefile | 26 + - .../sdk_fman/Peripherals/FM/Pcd/crc64.h | 360 + - .../sdk_fman/Peripherals/FM/Pcd/fm_cc.c | 7582 +++++++++++++++++ - .../sdk_fman/Peripherals/FM/Pcd/fm_cc.h | 399 + - .../sdk_fman/Peripherals/FM/Pcd/fm_kg.c | 3242 +++++++ - .../sdk_fman/Peripherals/FM/Pcd/fm_kg.h | 206 + - .../sdk_fman/Peripherals/FM/Pcd/fm_manip.c | 5571 ++++++++++++ - .../sdk_fman/Peripherals/FM/Pcd/fm_manip.h | 555 ++ - .../sdk_fman/Peripherals/FM/Pcd/fm_pcd.c | 2095 +++++ - .../sdk_fman/Peripherals/FM/Pcd/fm_pcd.h | 543 ++ - .../sdk_fman/Peripherals/FM/Pcd/fm_pcd_ipc.h | 280 + - .../sdk_fman/Peripherals/FM/Pcd/fm_plcr.c | 1847 ++++ - .../sdk_fman/Peripherals/FM/Pcd/fm_plcr.h | 165 + - .../sdk_fman/Peripherals/FM/Pcd/fm_prs.c | 423 + - .../sdk_fman/Peripherals/FM/Pcd/fm_prs.h | 316 + - .../sdk_fman/Peripherals/FM/Pcd/fm_replic.c | 984 +++ - .../sdk_fman/Peripherals/FM/Pcd/fm_replic.h | 101 + - .../sdk_fman/Peripherals/FM/Pcd/fman_kg.c | 890 ++ - .../sdk_fman/Peripherals/FM/Pcd/fman_prs.c | 129 + - .../sdk_fman/Peripherals/FM/Port/Makefile | 15 + - .../sdk_fman/Peripherals/FM/Port/fm_port.c | 6436 ++++++++++++++ - .../sdk_fman/Peripherals/FM/Port/fm_port.h | 999 +++ - .../Peripherals/FM/Port/fm_port_dsar.h | 494 ++ - .../sdk_fman/Peripherals/FM/Port/fm_port_im.c | 753 ++ - .../sdk_fman/Peripherals/FM/Port/fman_port.c | 1570 ++++ - .../sdk_fman/Peripherals/FM/Rtc/Makefile | 15 + - .../sdk_fman/Peripherals/FM/Rtc/fm_rtc.c | 692 ++ - .../sdk_fman/Peripherals/FM/Rtc/fm_rtc.h | 96 + - .../sdk_fman/Peripherals/FM/Rtc/fman_rtc.c | 334 + - .../sdk_fman/Peripherals/FM/SP/Makefile | 15 + - .../sdk_fman/Peripherals/FM/SP/fm_sp.c | 757 ++ - .../sdk_fman/Peripherals/FM/SP/fm_sp.h | 85 + - .../sdk_fman/Peripherals/FM/SP/fman_sp.c | 197 + - .../freescale/sdk_fman/Peripherals/FM/fm.c | 5216 ++++++++++++ - .../freescale/sdk_fman/Peripherals/FM/fm.h | 648 ++ - .../sdk_fman/Peripherals/FM/fm_ipc.h | 465 + - .../sdk_fman/Peripherals/FM/fm_muram.c | 174 + - .../freescale/sdk_fman/Peripherals/FM/fman.c | 1400 +++ - .../sdk_fman/Peripherals/FM/inc/fm_common.h | 1214 +++ - .../sdk_fman/Peripherals/FM/inc/fm_hc.h | 93 + - .../Peripherals/FM/inc/fm_sp_common.h | 117 + - .../ethernet/freescale/sdk_fman/etc/Makefile | 12 + - .../ethernet/freescale/sdk_fman/etc/error.c | 95 + - .../ethernet/freescale/sdk_fman/etc/list.c | 71 + - .../ethernet/freescale/sdk_fman/etc/memcpy.c | 620 ++ - .../net/ethernet/freescale/sdk_fman/etc/mm.c | 1155 +++ - .../net/ethernet/freescale/sdk_fman/etc/mm.h | 105 + - .../ethernet/freescale/sdk_fman/etc/sprint.c | 81 + - .../freescale/sdk_fman/fmanv3h_dflags.h | 57 + - .../freescale/sdk_fman/fmanv3l_dflags.h | 56 + - .../inc/Peripherals/crc_mac_addr_ext.h | 364 + - .../sdk_fman/inc/Peripherals/dpaa_ext.h | 210 + - .../sdk_fman/inc/Peripherals/fm_ext.h | 1731 ++++ - .../sdk_fman/inc/Peripherals/fm_mac_ext.h | 887 ++ - .../sdk_fman/inc/Peripherals/fm_macsec_ext.h | 1271 +++ - .../sdk_fman/inc/Peripherals/fm_muram_ext.h | 170 + - .../sdk_fman/inc/Peripherals/fm_pcd_ext.h | 3974 +++++++++ - .../sdk_fman/inc/Peripherals/fm_port_ext.h | 2608 ++++++ - .../sdk_fman/inc/Peripherals/fm_rtc_ext.h | 619 ++ - .../sdk_fman/inc/Peripherals/fm_vsp_ext.h | 411 + - .../sdk_fman/inc/Peripherals/mii_acc_ext.h | 76 + - .../freescale/sdk_fman/inc/core_ext.h | 90 + - .../freescale/sdk_fman/inc/cores/arm_ext.h | 55 + - .../freescale/sdk_fman/inc/cores/e500v2_ext.h | 476 ++ - .../freescale/sdk_fman/inc/cores/ppc_ext.h | 141 + - .../freescale/sdk_fman/inc/ddr_std_ext.h | 77 + - .../freescale/sdk_fman/inc/debug_ext.h | 233 + - .../freescale/sdk_fman/inc/endian_ext.h | 447 + - .../freescale/sdk_fman/inc/enet_ext.h | 205 + - .../freescale/sdk_fman/inc/error_ext.h | 529 ++ - .../freescale/sdk_fman/inc/etc/list_ext.h | 358 + - .../freescale/sdk_fman/inc/etc/mem_ext.h | 318 + - .../freescale/sdk_fman/inc/etc/memcpy_ext.h | 208 + - .../freescale/sdk_fman/inc/etc/mm_ext.h | 310 + - .../freescale/sdk_fman/inc/etc/sprint_ext.h | 118 + - .../inc/flib/common/arch/ppc_access.h | 37 + - .../sdk_fman/inc/flib/common/general.h | 52 + - .../freescale/sdk_fman/inc/flib/fman_common.h | 78 + - .../freescale/sdk_fman/inc/flib/fsl_enet.h | 273 + - .../freescale/sdk_fman/inc/flib/fsl_fman.h | 825 ++ - .../sdk_fman/inc/flib/fsl_fman_dtsec.h | 1096 +++ - .../inc/flib/fsl_fman_dtsec_mii_acc.h | 107 + - .../freescale/sdk_fman/inc/flib/fsl_fman_kg.h | 514 ++ - .../sdk_fman/inc/flib/fsl_fman_memac.h | 434 + - .../inc/flib/fsl_fman_memac_mii_acc.h | 78 + - .../sdk_fman/inc/flib/fsl_fman_port.h | 593 ++ - .../sdk_fman/inc/flib/fsl_fman_prs.h | 102 + - .../sdk_fman/inc/flib/fsl_fman_rtc.h | 449 + - .../freescale/sdk_fman/inc/flib/fsl_fman_sp.h | 138 + - .../sdk_fman/inc/flib/fsl_fman_tgec.h | 479 ++ - .../FMANV3H/dpaa_integration_ext.h | 291 + - .../inc/integrations/FMANV3H/part_ext.h | 71 + - .../FMANV3H/part_integration_ext.h | 304 + - .../FMANV3L/dpaa_integration_ext.h | 293 + - .../inc/integrations/FMANV3L/part_ext.h | 59 + - .../FMANV3L/part_integration_ext.h | 304 + - .../LS1043/dpaa_integration_ext.h | 291 + - .../inc/integrations/LS1043/part_ext.h | 64 + - .../LS1043/part_integration_ext.h | 185 + - .../integrations/P1023/dpaa_integration_ext.h | 213 + - .../inc/integrations/P1023/part_ext.h | 82 + - .../integrations/P1023/part_integration_ext.h | 635 ++ - .../P3040_P4080_P5020/dpaa_integration_ext.h | 276 + - .../integrations/P3040_P4080_P5020/part_ext.h | 83 + - .../P3040_P4080_P5020/part_integration_ext.h | 336 + - .../freescale/sdk_fman/inc/math_ext.h | 100 + - .../freescale/sdk_fman/inc/ncsw_ext.h | 435 + - .../ethernet/freescale/sdk_fman/inc/net_ext.h | 430 + - .../ethernet/freescale/sdk_fman/inc/std_ext.h | 48 + - .../freescale/sdk_fman/inc/stdarg_ext.h | 49 + - .../freescale/sdk_fman/inc/stdlib_ext.h | 162 + - .../freescale/sdk_fman/inc/string_ext.h | 56 + - .../freescale/sdk_fman/inc/types_ext.h | 62 + - .../freescale/sdk_fman/inc/xx_common.h | 56 + - .../ethernet/freescale/sdk_fman/inc/xx_ext.h | 791 ++ - .../freescale/sdk_fman/ls1043_dflags.h | 56 + - .../freescale/sdk_fman/ncsw_config.mk | 53 + - .../freescale/sdk_fman/p1023_dflags.h | 65 + - .../sdk_fman/p3040_4080_5020_dflags.h | 62 + - .../ethernet/freescale/sdk_fman/src/Makefile | 11 + - .../sdk_fman/src/inc/system/sys_ext.h | 118 + - .../sdk_fman/src/inc/system/sys_io_ext.h | 46 + - .../freescale/sdk_fman/src/inc/types_linux.h | 208 + - .../sdk_fman/src/inc/wrapper/fsl_fman_test.h | 84 + - .../sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h | 130 + - .../sdk_fman/src/inc/wrapper/lnxwrp_fm_ext.h | 163 + - .../src/inc/wrapper/lnxwrp_fsl_fman.h | 921 ++ - .../freescale/sdk_fman/src/inc/xx/xx.h | 50 + - .../freescale/sdk_fman/src/system/Makefile | 10 + - .../freescale/sdk_fman/src/system/sys_io.c | 171 + - .../freescale/sdk_fman/src/wrapper/Makefile | 19 + - .../sdk_fman/src/wrapper/fman_test.c | 1665 ++++ - .../sdk_fman/src/wrapper/lnxwrp_fm.c | 2908 +++++++ - .../sdk_fman/src/wrapper/lnxwrp_fm.h | 294 + - .../sdk_fman/src/wrapper/lnxwrp_fm_port.c | 1512 ++++ - .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c | 4854 +++++++++++ - .../src/wrapper/lnxwrp_ioctls_fm_compat.c | 1297 +++ - .../src/wrapper/lnxwrp_ioctls_fm_compat.h | 755 ++ - .../sdk_fman/src/wrapper/lnxwrp_resources.h | 121 + - .../src/wrapper/lnxwrp_resources_ut.c | 191 + - .../src/wrapper/lnxwrp_resources_ut.h | 144 + - .../src/wrapper/lnxwrp_resources_ut.make | 28 + - .../sdk_fman/src/wrapper/lnxwrp_sysfs.c | 60 + - .../sdk_fman/src/wrapper/lnxwrp_sysfs.h | 60 + - .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c | 1855 ++++ - .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm.h | 136 + - .../src/wrapper/lnxwrp_sysfs_fm_port.c | 1268 +++ - .../src/wrapper/lnxwrp_sysfs_fm_port.h | 56 + - .../freescale/sdk_fman/src/xx/Makefile | 18 + - .../sdk_fman/src/xx/module_strings.c | 46 + - .../freescale/sdk_fman/src/xx/xx_arm_linux.c | 905 ++ - .../freescale/sdk_fman/src/xx/xx_linux.c | 918 ++ - drivers/staging/fsl_qbman/Kconfig | 228 + - drivers/staging/fsl_qbman/Makefile | 28 + - drivers/staging/fsl_qbman/bman_config.c | 720 ++ - drivers/staging/fsl_qbman/bman_debugfs.c | 119 + - drivers/staging/fsl_qbman/bman_driver.c | 559 ++ - drivers/staging/fsl_qbman/bman_high.c | 1145 +++ - drivers/staging/fsl_qbman/bman_low.h | 565 ++ - drivers/staging/fsl_qbman/bman_private.h | 166 + - drivers/staging/fsl_qbman/bman_test.c | 56 + - drivers/staging/fsl_qbman/bman_test.h | 44 + - drivers/staging/fsl_qbman/bman_test_high.c | 183 + - drivers/staging/fsl_qbman/bman_test_thresh.c | 196 + - drivers/staging/fsl_qbman/dpa_alloc.c | 706 ++ - drivers/staging/fsl_qbman/dpa_sys.h | 259 + - drivers/staging/fsl_qbman/dpa_sys_arm.h | 95 + - drivers/staging/fsl_qbman/dpa_sys_arm64.h | 102 + - drivers/staging/fsl_qbman/dpa_sys_ppc32.h | 70 + - drivers/staging/fsl_qbman/dpa_sys_ppc64.h | 79 + - drivers/staging/fsl_qbman/fsl_usdpaa.c | 2008 +++++ - drivers/staging/fsl_qbman/fsl_usdpaa_irq.c | 289 + - drivers/staging/fsl_qbman/qbman_driver.c | 88 + - drivers/staging/fsl_qbman/qman_config.c | 1224 +++ - drivers/staging/fsl_qbman/qman_debugfs.c | 1594 ++++ - drivers/staging/fsl_qbman/qman_driver.c | 961 +++ - drivers/staging/fsl_qbman/qman_high.c | 5652 ++++++++++++ - drivers/staging/fsl_qbman/qman_low.h | 1445 ++++ - drivers/staging/fsl_qbman/qman_private.h | 398 + - drivers/staging/fsl_qbman/qman_test.c | 57 + - drivers/staging/fsl_qbman/qman_test.h | 45 + - drivers/staging/fsl_qbman/qman_test_high.c | 216 + - .../staging/fsl_qbman/qman_test_hotpotato.c | 502 ++ - drivers/staging/fsl_qbman/qman_utility.c | 129 + - include/linux/fsl/svr.h | 97 + - include/linux/fsl_bman.h | 532 ++ - include/linux/fsl_qman.h | 3900 +++++++++ - include/linux/fsl_usdpaa.h | 372 + - include/linux/netdev_features.h | 2 + - include/uapi/linux/fmd/Kbuild | 5 + - include/uapi/linux/fmd/Peripherals/Kbuild | 4 + - .../uapi/linux/fmd/Peripherals/fm_ioctls.h | 628 ++ - .../linux/fmd/Peripherals/fm_pcd_ioctls.h | 3084 +++++++ - .../linux/fmd/Peripherals/fm_port_ioctls.h | 973 +++ - .../linux/fmd/Peripherals/fm_test_ioctls.h | 208 + - include/uapi/linux/fmd/integrations/Kbuild | 1 + - .../fmd/integrations/integration_ioctls.h | 56 + - include/uapi/linux/fmd/ioctls.h | 96 + - include/uapi/linux/fmd/net_ioctls.h | 430 + - net/sched/sch_generic.c | 7 + - 273 files changed, 153944 insertions(+), 229 deletions(-) + drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 616 +- + drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 3 + + drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 41 +- + drivers/net/ethernet/freescale/fman/Kconfig | 1 - + drivers/net/ethernet/freescale/fman/Makefile | 12 +- + drivers/net/ethernet/freescale/fman/fman.c | 38 +- + drivers/net/ethernet/freescale/fman/fman.h | 5 + + drivers/net/ethernet/freescale/fman/fman_dtsec.c | 46 + + drivers/net/ethernet/freescale/fman/fman_dtsec.h | 2 + + drivers/net/ethernet/freescale/fman/fman_memac.c | 37 +- + drivers/net/ethernet/freescale/fman/fman_memac.h | 2 + + drivers/net/ethernet/freescale/fman/fman_port.c | 28 + + drivers/net/ethernet/freescale/fman/fman_port.h | 4 + + drivers/net/ethernet/freescale/fman/fman_tgec.c | 54 +- + drivers/net/ethernet/freescale/fman/fman_tgec.h | 2 + + drivers/net/ethernet/freescale/fman/mac.c | 152 +- + drivers/net/ethernet/freescale/fman/mac.h | 9 +- + drivers/net/ethernet/freescale/sdk_dpaa/Kconfig | 184 + + drivers/net/ethernet/freescale/sdk_dpaa/Makefile | 45 + + .../net/ethernet/freescale/sdk_dpaa/dpaa_1588.c | 580 ++ + .../net/ethernet/freescale/sdk_dpaa/dpaa_1588.h | 138 + + .../net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.c | 180 + + .../net/ethernet/freescale/sdk_dpaa/dpaa_debugfs.h | 43 + + drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c | 1223 ++++ + drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h | 674 ++ + .../ethernet/freescale/sdk_dpaa/dpaa_eth_base.c | 205 + + .../ethernet/freescale/sdk_dpaa/dpaa_eth_base.h | 49 + + .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c | 2076 ++++++ + .../ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.h | 241 + + .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 1745 +++++ + .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.h | 226 + + .../ethernet/freescale/sdk_dpaa/dpaa_eth_proxy.c | 381 + + .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c | 1195 +++ + .../ethernet/freescale/sdk_dpaa/dpaa_eth_sysfs.c | 278 + + .../ethernet/freescale/sdk_dpaa/dpaa_eth_trace.h | 144 + + .../net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c | 587 ++ + drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c | 931 +++ + drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 490 ++ + drivers/net/ethernet/freescale/sdk_dpaa/mac.h | 134 + + .../net/ethernet/freescale/sdk_dpaa/offline_port.c | 848 +++ + .../net/ethernet/freescale/sdk_dpaa/offline_port.h | 59 + + drivers/net/ethernet/freescale/sdk_fman/Kconfig | 153 + + drivers/net/ethernet/freescale/sdk_fman/Makefile | 11 + + .../freescale/sdk_fman/Peripherals/FM/HC/Makefile | 15 + + .../freescale/sdk_fman/Peripherals/FM/HC/hc.c | 1232 ++++ + .../freescale/sdk_fman/Peripherals/FM/MAC/Makefile | 28 + + .../freescale/sdk_fman/Peripherals/FM/MAC/dtsec.c | 1504 ++++ + .../freescale/sdk_fman/Peripherals/FM/MAC/dtsec.h | 228 + + .../sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.c | 97 + + .../sdk_fman/Peripherals/FM/MAC/dtsec_mii_acc.h | 42 + + .../freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.c | 674 ++ + .../freescale/sdk_fman/Peripherals/FM/MAC/fm_mac.h | 226 + + .../sdk_fman/Peripherals/FM/MAC/fman_crc32.c | 119 + + .../sdk_fman/Peripherals/FM/MAC/fman_crc32.h | 43 + + .../sdk_fman/Peripherals/FM/MAC/fman_dtsec.c | 847 +++ + .../Peripherals/FM/MAC/fman_dtsec_mii_acc.c | 165 + + .../sdk_fman/Peripherals/FM/MAC/fman_memac.c | 532 ++ + .../Peripherals/FM/MAC/fman_memac_mii_acc.c | 215 + + .../sdk_fman/Peripherals/FM/MAC/fman_tgec.c | 367 + + .../freescale/sdk_fman/Peripherals/FM/MAC/memac.c | 1166 +++ + .../freescale/sdk_fman/Peripherals/FM/MAC/memac.h | 110 + + .../sdk_fman/Peripherals/FM/MAC/memac_mii_acc.c | 78 + + .../sdk_fman/Peripherals/FM/MAC/memac_mii_acc.h | 73 + + .../freescale/sdk_fman/Peripherals/FM/MAC/tgec.c | 1017 +++ + .../freescale/sdk_fman/Peripherals/FM/MAC/tgec.h | 151 + + .../sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.c | 139 + + .../sdk_fman/Peripherals/FM/MAC/tgec_mii_acc.h | 80 + + .../sdk_fman/Peripherals/FM/MACSEC/Makefile | 15 + + .../sdk_fman/Peripherals/FM/MACSEC/fm_macsec.c | 237 + + .../sdk_fman/Peripherals/FM/MACSEC/fm_macsec.h | 203 + + .../Peripherals/FM/MACSEC/fm_macsec_guest.c | 59 + + .../Peripherals/FM/MACSEC/fm_macsec_master.c | 1031 +++ + .../Peripherals/FM/MACSEC/fm_macsec_master.h | 479 ++ + .../Peripherals/FM/MACSEC/fm_macsec_secy.c | 883 +++ + .../Peripherals/FM/MACSEC/fm_macsec_secy.h | 144 + + .../freescale/sdk_fman/Peripherals/FM/Makefile | 23 + + .../freescale/sdk_fman/Peripherals/FM/Pcd/Makefile | 26 + + .../freescale/sdk_fman/Peripherals/FM/Pcd/crc64.h | 360 + + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.c | 7582 ++++++++++++++++++++ + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_cc.h | 399 + + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.c | 3242 +++++++++ + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_kg.h | 206 + + .../sdk_fman/Peripherals/FM/Pcd/fm_manip.c | 5571 ++++++++++++++ + .../sdk_fman/Peripherals/FM/Pcd/fm_manip.h | 555 ++ + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.c | 2095 ++++++ + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_pcd.h | 543 ++ + .../sdk_fman/Peripherals/FM/Pcd/fm_pcd_ipc.h | 280 + + .../sdk_fman/Peripherals/FM/Pcd/fm_plcr.c | 1847 +++++ + .../sdk_fman/Peripherals/FM/Pcd/fm_plcr.h | 165 + + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.c | 423 ++ + .../freescale/sdk_fman/Peripherals/FM/Pcd/fm_prs.h | 316 + + .../sdk_fman/Peripherals/FM/Pcd/fm_replic.c | 984 +++ + .../sdk_fman/Peripherals/FM/Pcd/fm_replic.h | 101 + + .../sdk_fman/Peripherals/FM/Pcd/fman_kg.c | 890 +++ + .../sdk_fman/Peripherals/FM/Pcd/fman_prs.c | 129 + + .../sdk_fman/Peripherals/FM/Port/Makefile | 15 + + .../sdk_fman/Peripherals/FM/Port/fm_port.c | 6437 +++++++++++++++++ + .../sdk_fman/Peripherals/FM/Port/fm_port.h | 999 +++ + .../sdk_fman/Peripherals/FM/Port/fm_port_dsar.h | 494 ++ + .../sdk_fman/Peripherals/FM/Port/fm_port_im.c | 753 ++ + .../sdk_fman/Peripherals/FM/Port/fman_port.c | 1570 ++++ + .../freescale/sdk_fman/Peripherals/FM/Rtc/Makefile | 15 + + .../freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.c | 692 ++ + .../freescale/sdk_fman/Peripherals/FM/Rtc/fm_rtc.h | 96 + + .../sdk_fman/Peripherals/FM/Rtc/fman_rtc.c | 334 + + .../freescale/sdk_fman/Peripherals/FM/SP/Makefile | 15 + + .../freescale/sdk_fman/Peripherals/FM/SP/fm_sp.c | 757 ++ + .../freescale/sdk_fman/Peripherals/FM/SP/fm_sp.h | 85 + + .../freescale/sdk_fman/Peripherals/FM/SP/fman_sp.c | 197 + + .../freescale/sdk_fman/Peripherals/FM/fm.c | 5216 ++++++++++++++ + .../freescale/sdk_fman/Peripherals/FM/fm.h | 648 ++ + .../freescale/sdk_fman/Peripherals/FM/fm_ipc.h | 465 ++ + .../freescale/sdk_fman/Peripherals/FM/fm_muram.c | 174 + + .../freescale/sdk_fman/Peripherals/FM/fman.c | 1400 ++++ + .../sdk_fman/Peripherals/FM/inc/fm_common.h | 1214 ++++ + .../freescale/sdk_fman/Peripherals/FM/inc/fm_hc.h | 93 + + .../sdk_fman/Peripherals/FM/inc/fm_sp_common.h | 117 + + .../net/ethernet/freescale/sdk_fman/etc/Makefile | 12 + + .../net/ethernet/freescale/sdk_fman/etc/error.c | 95 + + drivers/net/ethernet/freescale/sdk_fman/etc/list.c | 71 + + .../net/ethernet/freescale/sdk_fman/etc/memcpy.c | 620 ++ + drivers/net/ethernet/freescale/sdk_fman/etc/mm.c | 1155 +++ + drivers/net/ethernet/freescale/sdk_fman/etc/mm.h | 105 + + .../net/ethernet/freescale/sdk_fman/etc/sprint.c | 81 + + .../ethernet/freescale/sdk_fman/fmanv3h_dflags.h | 57 + + .../ethernet/freescale/sdk_fman/fmanv3l_dflags.h | 56 + + .../sdk_fman/inc/Peripherals/crc_mac_addr_ext.h | 364 + + .../freescale/sdk_fman/inc/Peripherals/dpaa_ext.h | 210 + + .../freescale/sdk_fman/inc/Peripherals/fm_ext.h | 1731 +++++ + .../sdk_fman/inc/Peripherals/fm_mac_ext.h | 887 +++ + .../sdk_fman/inc/Peripherals/fm_macsec_ext.h | 1271 ++++ + .../sdk_fman/inc/Peripherals/fm_muram_ext.h | 170 + + .../sdk_fman/inc/Peripherals/fm_pcd_ext.h | 3974 ++++++++++ + .../sdk_fman/inc/Peripherals/fm_port_ext.h | 2608 +++++++ + .../sdk_fman/inc/Peripherals/fm_rtc_ext.h | 619 ++ + .../sdk_fman/inc/Peripherals/fm_vsp_ext.h | 411 ++ + .../sdk_fman/inc/Peripherals/mii_acc_ext.h | 76 + + .../net/ethernet/freescale/sdk_fman/inc/core_ext.h | 90 + + .../freescale/sdk_fman/inc/cores/arm_ext.h | 55 + + .../freescale/sdk_fman/inc/cores/e500v2_ext.h | 476 ++ + .../freescale/sdk_fman/inc/cores/ppc_ext.h | 141 + + .../ethernet/freescale/sdk_fman/inc/ddr_std_ext.h | 77 + + .../ethernet/freescale/sdk_fman/inc/debug_ext.h | 233 + + .../ethernet/freescale/sdk_fman/inc/endian_ext.h | 447 ++ + .../net/ethernet/freescale/sdk_fman/inc/enet_ext.h | 205 + + .../ethernet/freescale/sdk_fman/inc/error_ext.h | 529 ++ + .../ethernet/freescale/sdk_fman/inc/etc/list_ext.h | 358 + + .../ethernet/freescale/sdk_fman/inc/etc/mem_ext.h | 318 + + .../freescale/sdk_fman/inc/etc/memcpy_ext.h | 208 + + .../ethernet/freescale/sdk_fman/inc/etc/mm_ext.h | 310 + + .../freescale/sdk_fman/inc/etc/sprint_ext.h | 118 + + .../sdk_fman/inc/flib/common/arch/ppc_access.h | 37 + + .../freescale/sdk_fman/inc/flib/common/general.h | 52 + + .../freescale/sdk_fman/inc/flib/fman_common.h | 78 + + .../freescale/sdk_fman/inc/flib/fsl_enet.h | 273 + + .../freescale/sdk_fman/inc/flib/fsl_fman.h | 825 +++ + .../freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h | 1096 +++ + .../sdk_fman/inc/flib/fsl_fman_dtsec_mii_acc.h | 107 + + .../freescale/sdk_fman/inc/flib/fsl_fman_kg.h | 514 ++ + .../freescale/sdk_fman/inc/flib/fsl_fman_memac.h | 434 ++ + .../sdk_fman/inc/flib/fsl_fman_memac_mii_acc.h | 78 + + .../freescale/sdk_fman/inc/flib/fsl_fman_port.h | 593 ++ + .../freescale/sdk_fman/inc/flib/fsl_fman_prs.h | 102 + + .../freescale/sdk_fman/inc/flib/fsl_fman_rtc.h | 449 ++ + .../freescale/sdk_fman/inc/flib/fsl_fman_sp.h | 138 + + .../freescale/sdk_fman/inc/flib/fsl_fman_tgec.h | 479 ++ + .../integrations/FMANV3H/dpaa_integration_ext.h | 291 + + .../sdk_fman/inc/integrations/FMANV3H/part_ext.h | 71 + + .../integrations/FMANV3H/part_integration_ext.h | 304 + + .../integrations/FMANV3L/dpaa_integration_ext.h | 293 + + .../sdk_fman/inc/integrations/FMANV3L/part_ext.h | 59 + + .../integrations/FMANV3L/part_integration_ext.h | 304 + + .../inc/integrations/LS1043/dpaa_integration_ext.h | 291 + + .../sdk_fman/inc/integrations/LS1043/part_ext.h | 64 + + .../inc/integrations/LS1043/part_integration_ext.h | 185 + + .../inc/integrations/P1023/dpaa_integration_ext.h | 213 + + .../sdk_fman/inc/integrations/P1023/part_ext.h | 82 + + .../inc/integrations/P1023/part_integration_ext.h | 635 ++ + .../P3040_P4080_P5020/dpaa_integration_ext.h | 276 + + .../inc/integrations/P3040_P4080_P5020/part_ext.h | 83 + + .../P3040_P4080_P5020/part_integration_ext.h | 336 + + .../net/ethernet/freescale/sdk_fman/inc/math_ext.h | 100 + + .../net/ethernet/freescale/sdk_fman/inc/ncsw_ext.h | 435 ++ + .../net/ethernet/freescale/sdk_fman/inc/net_ext.h | 430 ++ + .../net/ethernet/freescale/sdk_fman/inc/std_ext.h | 48 + + .../ethernet/freescale/sdk_fman/inc/stdarg_ext.h | 49 + + .../ethernet/freescale/sdk_fman/inc/stdlib_ext.h | 162 + + .../ethernet/freescale/sdk_fman/inc/string_ext.h | 56 + + .../ethernet/freescale/sdk_fman/inc/types_ext.h | 62 + + .../ethernet/freescale/sdk_fman/inc/xx_common.h | 56 + + .../net/ethernet/freescale/sdk_fman/inc/xx_ext.h | 791 ++ + .../ethernet/freescale/sdk_fman/ls1043_dflags.h | 56 + + .../net/ethernet/freescale/sdk_fman/ncsw_config.mk | 53 + + .../net/ethernet/freescale/sdk_fman/p1023_dflags.h | 65 + + .../freescale/sdk_fman/p3040_4080_5020_dflags.h | 62 + + .../net/ethernet/freescale/sdk_fman/src/Makefile | 11 + + .../freescale/sdk_fman/src/inc/system/sys_ext.h | 118 + + .../freescale/sdk_fman/src/inc/system/sys_io_ext.h | 46 + + .../freescale/sdk_fman/src/inc/types_linux.h | 208 + + .../sdk_fman/src/inc/wrapper/fsl_fman_test.h | 84 + + .../sdk_fman/src/inc/wrapper/lnxwrp_exp_sym.h | 130 + + .../sdk_fman/src/inc/wrapper/lnxwrp_fm_ext.h | 163 + + .../sdk_fman/src/inc/wrapper/lnxwrp_fsl_fman.h | 921 +++ + .../ethernet/freescale/sdk_fman/src/inc/xx/xx.h | 50 + + .../freescale/sdk_fman/src/system/Makefile | 10 + + .../freescale/sdk_fman/src/system/sys_io.c | 171 + + .../freescale/sdk_fman/src/wrapper/Makefile | 19 + + .../freescale/sdk_fman/src/wrapper/fman_test.c | 1665 +++++ + .../freescale/sdk_fman/src/wrapper/lnxwrp_fm.c | 2910 ++++++++ + .../freescale/sdk_fman/src/wrapper/lnxwrp_fm.h | 294 + + .../sdk_fman/src/wrapper/lnxwrp_fm_port.c | 1512 ++++ + .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm.c | 4854 +++++++++++++ + .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.c | 1297 ++++ + .../sdk_fman/src/wrapper/lnxwrp_ioctls_fm_compat.h | 755 ++ + .../sdk_fman/src/wrapper/lnxwrp_resources.h | 121 + + .../sdk_fman/src/wrapper/lnxwrp_resources_ut.c | 191 + + .../sdk_fman/src/wrapper/lnxwrp_resources_ut.h | 144 + + .../sdk_fman/src/wrapper/lnxwrp_resources_ut.make | 28 + + .../freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.c | 60 + + .../freescale/sdk_fman/src/wrapper/lnxwrp_sysfs.h | 60 + + .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm.c | 1855 +++++ + .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm.h | 136 + + .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.c | 1268 ++++ + .../sdk_fman/src/wrapper/lnxwrp_sysfs_fm_port.h | 56 + + .../ethernet/freescale/sdk_fman/src/xx/Makefile | 18 + + .../freescale/sdk_fman/src/xx/module_strings.c | 46 + + .../freescale/sdk_fman/src/xx/xx_arm_linux.c | 905 +++ + .../ethernet/freescale/sdk_fman/src/xx/xx_linux.c | 918 +++ + drivers/staging/fsl_qbman/Kconfig | 228 + + drivers/staging/fsl_qbman/Makefile | 28 + + drivers/staging/fsl_qbman/bman_config.c | 720 ++ + drivers/staging/fsl_qbman/bman_debugfs.c | 119 + + drivers/staging/fsl_qbman/bman_driver.c | 559 ++ + drivers/staging/fsl_qbman/bman_high.c | 1145 +++ + drivers/staging/fsl_qbman/bman_low.h | 565 ++ + drivers/staging/fsl_qbman/bman_private.h | 166 + + drivers/staging/fsl_qbman/bman_test.c | 56 + + drivers/staging/fsl_qbman/bman_test.h | 44 + + drivers/staging/fsl_qbman/bman_test_high.c | 183 + + drivers/staging/fsl_qbman/bman_test_thresh.c | 196 + + drivers/staging/fsl_qbman/dpa_alloc.c | 706 ++ + drivers/staging/fsl_qbman/dpa_sys.h | 259 + + drivers/staging/fsl_qbman/dpa_sys_arm.h | 95 + + drivers/staging/fsl_qbman/dpa_sys_arm64.h | 102 + + drivers/staging/fsl_qbman/dpa_sys_ppc32.h | 70 + + drivers/staging/fsl_qbman/dpa_sys_ppc64.h | 79 + + drivers/staging/fsl_qbman/fsl_usdpaa.c | 2008 ++++++ + drivers/staging/fsl_qbman/fsl_usdpaa_irq.c | 289 + + drivers/staging/fsl_qbman/qbman_driver.c | 88 + + drivers/staging/fsl_qbman/qman_config.c | 1224 ++++ + drivers/staging/fsl_qbman/qman_debugfs.c | 1594 ++++ + drivers/staging/fsl_qbman/qman_driver.c | 961 +++ + drivers/staging/fsl_qbman/qman_high.c | 5655 +++++++++++++++ + drivers/staging/fsl_qbman/qman_low.h | 1445 ++++ + drivers/staging/fsl_qbman/qman_private.h | 398 + + drivers/staging/fsl_qbman/qman_test.c | 57 + + drivers/staging/fsl_qbman/qman_test.h | 45 + + drivers/staging/fsl_qbman/qman_test_high.c | 216 + + drivers/staging/fsl_qbman/qman_test_hotpotato.c | 502 ++ + drivers/staging/fsl_qbman/qman_utility.c | 129 + + include/linux/fsl/svr.h | 97 + + include/linux/fsl_bman.h | 532 ++ + include/linux/fsl_qman.h | 3910 ++++++++++ + include/linux/fsl_usdpaa.h | 372 + + include/linux/netdev_features.h | 2 + + include/uapi/linux/fmd/Kbuild | 5 + + include/uapi/linux/fmd/Peripherals/Kbuild | 4 + + include/uapi/linux/fmd/Peripherals/fm_ioctls.h | 628 ++ + include/uapi/linux/fmd/Peripherals/fm_pcd_ioctls.h | 3084 ++++++++ + .../uapi/linux/fmd/Peripherals/fm_port_ioctls.h | 973 +++ + .../uapi/linux/fmd/Peripherals/fm_test_ioctls.h | 208 + + include/uapi/linux/fmd/integrations/Kbuild | 1 + + .../linux/fmd/integrations/integration_ioctls.h | 56 + + include/uapi/linux/fmd/ioctls.h | 96 + + include/uapi/linux/fmd/net_ioctls.h | 430 ++ + net/sched/sch_generic.c | 7 + + 276 files changed, 153982 insertions(+), 277 deletions(-) create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/Kconfig create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/Makefile create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_1588.c @@ -321,7 +326,6 @@ Signed-off-by: Biwen Li create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sysfs.c create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_trace.h create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c - create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/mac.c create mode 100644 drivers/net/ethernet/freescale/sdk_dpaa/mac.h @@ -563,7 +567,11 @@ Signed-off-by: Biwen Li --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c -@@ -53,6 +53,9 @@ +@@ -50,9 +50,13 @@ + #include + #include + #include ++#include #include #include #include @@ -573,7 +581,7 @@ Signed-off-by: Biwen Li #include "fman.h" #include "fman_port.h" -@@ -73,6 +76,10 @@ static u16 tx_timeout = 1000; +@@ -73,6 +77,10 @@ static u16 tx_timeout = 1000; module_param(tx_timeout, ushort, 0444); MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); @@ -584,7 +592,7 @@ Signed-off-by: Biwen Li #define FM_FD_STAT_RX_ERRORS \ (FM_FD_ERR_DMA | FM_FD_ERR_PHYSICAL | \ FM_FD_ERR_SIZE | FM_FD_ERR_CLS_DISCARD | \ -@@ -388,34 +395,19 @@ out: +@@ -388,34 +396,19 @@ out: static struct mac_device *dpaa_mac_dev_get(struct platform_device *pdev) { @@ -624,7 +632,7 @@ Signed-off-by: Biwen Li return ERR_PTR(-EINVAL); } -@@ -472,6 +464,16 @@ static void dpaa_set_rx_mode(struct net_ +@@ -472,6 +465,16 @@ static void dpaa_set_rx_mode(struct net_ err); } @@ -641,7 +649,25 @@ Signed-off-by: Biwen Li err = priv->mac_dev->set_multi(net_dev, priv->mac_dev); if (err < 0) netif_err(priv, drv, net_dev, "mac_dev->set_multi() = %d\n", -@@ -1500,7 +1502,19 @@ static int dpaa_bp_add_8_bufs(const stru +@@ -1176,7 +1179,7 @@ static int dpaa_eth_init_tx_port(struct + buf_prefix_content.priv_data_size = buf_layout->priv_data_size; + buf_prefix_content.pass_prs_result = true; + buf_prefix_content.pass_hash_result = true; +- buf_prefix_content.pass_time_stamp = false; ++ buf_prefix_content.pass_time_stamp = true; + buf_prefix_content.data_align = DPAA_FD_DATA_ALIGNMENT; + + params.specific_params.non_rx_params.err_fqid = errq->fqid; +@@ -1218,7 +1221,7 @@ static int dpaa_eth_init_rx_port(struct + buf_prefix_content.priv_data_size = buf_layout->priv_data_size; + buf_prefix_content.pass_prs_result = true; + buf_prefix_content.pass_hash_result = true; +- buf_prefix_content.pass_time_stamp = false; ++ buf_prefix_content.pass_time_stamp = true; + buf_prefix_content.data_align = DPAA_FD_DATA_ALIGNMENT; + + rx_p = ¶ms.specific_params.rx_params; +@@ -1500,7 +1503,19 @@ static int dpaa_bp_add_8_bufs(const stru u8 i; for (i = 0; i < 8; i++) { @@ -661,7 +687,72 @@ Signed-off-by: Biwen Li if (unlikely(!new_buf)) { dev_err(dev, "netdev_alloc_frag() failed, size %zu\n", dpaa_bp->raw_size); -@@ -1645,9 +1659,13 @@ static struct sk_buff *dpaa_cleanup_tx_f +@@ -1600,6 +1615,17 @@ static int dpaa_eth_refill_bpools(struct + return 0; + } + ++static phys_addr_t dpaa_iova_to_phys(struct device *dev, dma_addr_t addr) ++{ ++ struct iommu_domain *domain; ++ ++ domain = iommu_get_domain_for_dev(dev); ++ if (domain) ++ return iommu_iova_to_phys(domain, addr); ++ else ++ return addr; ++} ++ + /* Cleanup function for outgoing frame descriptors that were built on Tx path, + * either contiguous frames or scatter/gather ones. + * Skb freeing is not handled here. +@@ -1615,24 +1641,41 @@ static struct sk_buff *dpaa_cleanup_tx_f + { + const enum dma_data_direction dma_dir = DMA_TO_DEVICE; + struct device *dev = priv->net_dev->dev.parent; ++ struct skb_shared_hwtstamps shhwtstamps; + dma_addr_t addr = qm_fd_addr(fd); + const struct qm_sg_entry *sgt; + struct sk_buff **skbh, *skb; + int nr_frags, i; ++ u64 ns; + +- skbh = (struct sk_buff **)phys_to_virt(addr); ++ skbh = (struct sk_buff **)phys_to_virt(dpaa_iova_to_phys(dev, addr)); + skb = *skbh; + ++ if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { ++ memset(&shhwtstamps, 0, sizeof(shhwtstamps)); ++ ++ if (!fman_port_get_tstamp(priv->mac_dev->port[TX], (void *)skbh, ++ &ns)) { ++ shhwtstamps.hwtstamp = ns_to_ktime(ns); ++ skb_tstamp_tx(skb, &shhwtstamps); ++ } else { ++ dev_warn(dev, "fman_port_get_tstamp failed!\n"); ++ } ++ } ++ + if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) { + nr_frags = skb_shinfo(skb)->nr_frags; +- dma_unmap_single(dev, addr, +- qm_fd_get_offset(fd) + DPAA_SGT_SIZE, +- dma_dir); + + /* The sgt buffer has been allocated with netdev_alloc_frag(), + * it's from lowmem. + */ +- sgt = phys_to_virt(addr + qm_fd_get_offset(fd)); ++ sgt = phys_to_virt(dpaa_iova_to_phys(dev, ++ addr + ++ qm_fd_get_offset(fd))); ++ ++ dma_unmap_single(dev, addr, ++ qm_fd_get_offset(fd) + DPAA_SGT_SIZE, ++ dma_dir); + + /* sgt[0] is from lowmem, was dma_map_single()-ed */ + dma_unmap_single(dev, qm_sg_addr(&sgt[0]), +@@ -1645,9 +1688,13 @@ static struct sk_buff *dpaa_cleanup_tx_f dma_unmap_page(dev, qm_sg_addr(&sgt[i]), qm_sg_entry_get_len(&sgt[i]), dma_dir); } @@ -674,11 +765,78 @@ Signed-off-by: Biwen Li + else +#endif + /* Free the page frag that we allocated on Tx */ -+ skb_free_frag(phys_to_virt(addr)); ++ skb_free_frag(skbh); } else { dma_unmap_single(dev, addr, skb_tail_pointer(skb) - (u8 *)skbh, dma_dir); -@@ -1739,6 +1757,7 @@ static struct sk_buff *sg_fd_to_skb(cons +@@ -1678,26 +1725,21 @@ static u8 rx_csum_offload(const struct d + * accommodate the shared info area of the skb. + */ + static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv, +- const struct qm_fd *fd) ++ const struct qm_fd *fd, ++ struct dpaa_bp *dpaa_bp, ++ void *vaddr) + { + ssize_t fd_off = qm_fd_get_offset(fd); +- dma_addr_t addr = qm_fd_addr(fd); +- struct dpaa_bp *dpaa_bp; + struct sk_buff *skb; +- void *vaddr; + +- vaddr = phys_to_virt(addr); + WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES)); + +- dpaa_bp = dpaa_bpid2pool(fd->bpid); +- if (!dpaa_bp) +- goto free_buffer; +- + skb = build_skb(vaddr, dpaa_bp->size + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); + if (unlikely(!skb)) { + WARN_ONCE(1, "Build skb failure on Rx\n"); +- goto free_buffer; ++ skb_free_frag(vaddr); ++ return NULL; + } + WARN_ON(fd_off != priv->rx_headroom); + skb_reserve(skb, fd_off); +@@ -1706,10 +1748,6 @@ static struct sk_buff *contig_fd_to_skb( + skb->ip_summed = rx_csum_offload(priv, fd); + + return skb; +- +-free_buffer: +- skb_free_frag(vaddr); +- return NULL; + } + + /* Build an skb with the data of the first S/G entry in the linear portion and +@@ -1718,14 +1756,14 @@ free_buffer: + * The page fragment holding the S/G Table is recycled here. + */ + static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv, +- const struct qm_fd *fd) ++ const struct qm_fd *fd, ++ struct dpaa_bp *dpaa_bp, ++ void *vaddr) + { + ssize_t fd_off = qm_fd_get_offset(fd); +- dma_addr_t addr = qm_fd_addr(fd); + const struct qm_sg_entry *sgt; + struct page *page, *head_page; +- struct dpaa_bp *dpaa_bp; +- void *vaddr, *sg_vaddr; ++ void *sg_vaddr; + int frag_off, frag_len; + struct sk_buff *skb; + dma_addr_t sg_addr; +@@ -1734,29 +1772,33 @@ static struct sk_buff *sg_fd_to_skb(cons + int *count_ptr; + int i; + +- vaddr = phys_to_virt(addr); + WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES)); /* Iterate through the SGT entries and add data buffers to the skb */ sgt = vaddr + fd_off; @@ -686,7 +844,25 @@ Signed-off-by: Biwen Li for (i = 0; i < DPAA_SGT_MAX_ENTRIES; i++) { /* Extension bit is not supported */ WARN_ON(qm_sg_entry_is_ext(&sgt[i])); -@@ -1756,7 +1775,7 @@ static struct sk_buff *sg_fd_to_skb(cons + + sg_addr = qm_sg_addr(&sgt[i]); +- sg_vaddr = phys_to_virt(sg_addr); +- WARN_ON(!IS_ALIGNED((unsigned long)sg_vaddr, +- SMP_CACHE_BYTES)); + + /* We may use multiple Rx pools */ + dpaa_bp = dpaa_bpid2pool(sgt[i].bpid); +- if (!dpaa_bp) ++ if (!dpaa_bp) { ++ pr_info("%s: fail to get dpaa_bp for sg bpid %d\n", ++ __func__, sgt[i].bpid); + goto free_buffers; ++ } ++ sg_vaddr = phys_to_virt(dpaa_iova_to_phys(dpaa_bp->dev, ++ sg_addr)); ++ WARN_ON(!IS_ALIGNED((unsigned long)sg_vaddr, ++ SMP_CACHE_BYTES)); + count_ptr = this_cpu_ptr(dpaa_bp->percpu_count); dma_unmap_single(dpaa_bp->dev, sg_addr, dpaa_bp->size, DMA_FROM_DEVICE); @@ -695,7 +871,21 @@ Signed-off-by: Biwen Li sz = dpaa_bp->size + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); skb = build_skb(sg_vaddr, sz); -@@ -1909,16 +1928,28 @@ static int skb_to_sg_fd(struct dpaa_priv +@@ -1823,10 +1865,11 @@ free_buffers: + /* free all the SG entries */ + for (i = 0; i < DPAA_SGT_MAX_ENTRIES ; i++) { + sg_addr = qm_sg_addr(&sgt[i]); +- sg_vaddr = phys_to_virt(sg_addr); +- skb_free_frag(sg_vaddr); + dpaa_bp = dpaa_bpid2pool(sgt[i].bpid); + if (dpaa_bp) { ++ sg_addr = dpaa_iova_to_phys(dpaa_bp->dev, sg_addr); ++ sg_vaddr = phys_to_virt(sg_addr); ++ skb_free_frag(sg_vaddr); + count_ptr = this_cpu_ptr(dpaa_bp->percpu_count); + (*count_ptr)--; + } +@@ -1909,16 +1952,28 @@ static int skb_to_sg_fd(struct dpaa_priv size_t frag_len; void *sgt_buf; @@ -732,7 +922,7 @@ Signed-off-by: Biwen Li * * We must do this before dma_map_single(DMA_TO_DEVICE), because we may * need to write into the skb. -@@ -2036,6 +2067,122 @@ static inline int dpaa_xmit(struct dpaa_ +@@ -2036,12 +2091,129 @@ static inline int dpaa_xmit(struct dpaa_ return 0; } @@ -855,7 +1045,14 @@ Signed-off-by: Biwen Li static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev) { const int queue_mapping = skb_get_queue_mapping(skb); -@@ -2069,19 +2216,32 @@ static int dpaa_start_xmit(struct sk_buf + bool nonlinear = skb_is_nonlinear(skb); + struct rtnl_link_stats64 *percpu_stats; + struct dpaa_percpu_priv *percpu_priv; ++ struct netdev_queue *txq; + struct dpaa_priv *priv; + struct qm_fd fd; + int offset = 0; +@@ -2069,24 +2241,47 @@ static int dpaa_start_xmit(struct sk_buf /* MAX_SKB_FRAGS is equal or larger than our dpaa_SGT_MAX_ENTRIES; * make sure we don't feed FMan with more fragments than it supports. */ @@ -872,8 +1069,9 @@ Signed-off-by: Biwen Li */ - if (unlikely(nonlinear) && __skb_linearize(skb)) + if (__skb_linearize(skb)) -+ goto enomem; -+ + goto enomem; + +- /* Finally, create a contig FD from this skb */ + nonlinear = skb_is_nonlinear(skb); + } + @@ -881,12 +1079,11 @@ Signed-off-by: Biwen Li + if (unlikely(dpaa_errata_a010022)) { + skb = dpaa_errata_a010022_prevent(skb, priv); + if (!skb) - goto enomem; ++ goto enomem; + nonlinear = skb_is_nonlinear(skb); + } +#endif - -- /* Finally, create a contig FD from this skb */ ++ + if (nonlinear) { + /* Just create a S/G fd based on the skb */ + err = skb_to_sg_fd(priv, skb, &fd); @@ -896,7 +1093,22 @@ Signed-off-by: Biwen Li err = skb_to_contig_fd(priv, skb, &fd, &offset); } if (unlikely(err < 0)) -@@ -2218,14 +2378,8 @@ static enum qman_cb_dqrr_result rx_error + goto skb_to_fd_failed; + ++ txq = netdev_get_tx_queue(net_dev, queue_mapping); ++ ++ /* LLTX requires to do our own update of trans_start */ ++ txq->trans_start = jiffies; ++ ++ if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { ++ fd.cmd |= cpu_to_be32(FM_FD_CMD_UPD); ++ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; ++ } ++ + if (likely(dpaa_xmit(priv, percpu_stats, queue_mapping, &fd) == 0)) + return NETDEV_TX_OK; + +@@ -2218,14 +2413,8 @@ static enum qman_cb_dqrr_result rx_error if (dpaa_eth_napi_schedule(percpu_priv, portal)) return qman_cb_dqrr_stop; @@ -913,7 +1125,64 @@ Signed-off-by: Biwen Li return qman_cb_dqrr_consume; } -@@ -2439,6 +2593,44 @@ static void dpaa_eth_napi_disable(struct +@@ -2234,6 +2423,7 @@ static enum qman_cb_dqrr_result rx_defau + struct qman_fq *fq, + const struct qm_dqrr_entry *dq) + { ++ struct skb_shared_hwtstamps *shhwtstamps; + struct rtnl_link_stats64 *percpu_stats; + struct dpaa_percpu_priv *percpu_priv; + const struct qm_fd *fd = &dq->fd; +@@ -2247,6 +2437,7 @@ static enum qman_cb_dqrr_result rx_defau + struct sk_buff *skb; + int *count_ptr; + void *vaddr; ++ u64 ns; + + fd_status = be32_to_cpu(fd->status); + fd_format = qm_fd_get_format(fd); +@@ -2289,12 +2480,12 @@ static enum qman_cb_dqrr_result rx_defau + if (!dpaa_bp) + return qman_cb_dqrr_consume; + +- dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE); +- + /* prefetch the first 64 bytes of the frame or the SGT start */ +- vaddr = phys_to_virt(addr); ++ vaddr = phys_to_virt(dpaa_iova_to_phys(dpaa_bp->dev, addr)); + prefetch(vaddr + qm_fd_get_offset(fd)); + ++ dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE); ++ + /* The only FD types that we may receive are contig and S/G */ + WARN_ON((fd_format != qm_fd_contig) && (fd_format != qm_fd_sg)); + +@@ -2305,12 +2496,22 @@ static enum qman_cb_dqrr_result rx_defau + (*count_ptr)--; + + if (likely(fd_format == qm_fd_contig)) +- skb = contig_fd_to_skb(priv, fd); ++ skb = contig_fd_to_skb(priv, fd, dpaa_bp, vaddr); + else +- skb = sg_fd_to_skb(priv, fd); ++ skb = sg_fd_to_skb(priv, fd, dpaa_bp, vaddr); + if (!skb) + return qman_cb_dqrr_consume; + ++ if (priv->rx_tstamp) { ++ shhwtstamps = skb_hwtstamps(skb); ++ memset(shhwtstamps, 0, sizeof(*shhwtstamps)); ++ ++ if (!fman_port_get_tstamp(priv->mac_dev->port[RX], vaddr, &ns)) ++ shhwtstamps->hwtstamp = ns_to_ktime(ns); ++ else ++ dev_warn(net_dev->dev.parent, "fman_port_get_tstamp failed!\n"); ++ } ++ + skb->protocol = eth_type_trans(skb, net_dev); + + if (net_dev->features & NETIF_F_RXHASH && priv->keygen_in_use && +@@ -2439,6 +2640,44 @@ static void dpaa_eth_napi_disable(struct } } @@ -958,7 +1227,7 @@ Signed-off-by: Biwen Li static int dpaa_open(struct net_device *net_dev) { struct mac_device *mac_dev; -@@ -2449,12 +2641,9 @@ static int dpaa_open(struct net_device * +@@ -2449,12 +2688,9 @@ static int dpaa_open(struct net_device * mac_dev = priv->mac_dev; dpaa_eth_napi_enable(priv); @@ -973,7 +1242,69 @@ Signed-off-by: Biwen Li for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) { err = fman_port_enable(mac_dev->port[i]); -@@ -2653,7 +2842,6 @@ static inline u16 dpaa_get_headroom(stru +@@ -2495,11 +2731,58 @@ static int dpaa_eth_stop(struct net_devi + return err; + } + ++static int dpaa_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ struct dpaa_priv *priv = netdev_priv(dev); ++ struct hwtstamp_config config; ++ ++ if (copy_from_user(&config, rq->ifr_data, sizeof(config))) ++ return -EFAULT; ++ ++ switch (config.tx_type) { ++ case HWTSTAMP_TX_OFF: ++ /* Couldn't disable rx/tx timestamping separately. ++ * Do nothing here. ++ */ ++ priv->tx_tstamp = false; ++ break; ++ case HWTSTAMP_TX_ON: ++ priv->mac_dev->set_tstamp(priv->mac_dev->fman_mac, true); ++ priv->tx_tstamp = true; ++ break; ++ default: ++ return -ERANGE; ++ } ++ ++ if (config.rx_filter == HWTSTAMP_FILTER_NONE) { ++ /* Couldn't disable rx/tx timestamping separately. ++ * Do nothing here. ++ */ ++ priv->rx_tstamp = false; ++ } else { ++ priv->mac_dev->set_tstamp(priv->mac_dev->fman_mac, true); ++ priv->rx_tstamp = true; ++ /* TS is set for all frame types, not only those requested */ ++ config.rx_filter = HWTSTAMP_FILTER_ALL; ++ } ++ ++ return copy_to_user(rq->ifr_data, &config, sizeof(config)) ? ++ -EFAULT : 0; ++} ++ + static int dpaa_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd) + { +- if (!net_dev->phydev) +- return -EINVAL; +- return phy_mii_ioctl(net_dev->phydev, rq, cmd); ++ int ret = -EINVAL; ++ ++ if (cmd == SIOCGMIIREG) { ++ if (net_dev->phydev) ++ return phy_mii_ioctl(net_dev->phydev, rq, cmd); ++ } ++ ++ if (cmd == SIOCSHWTSTAMP) ++ return dpaa_ts_ioctl(net_dev, rq, cmd); ++ ++ return ret; + } + + static const struct net_device_ops dpaa_ops = { +@@ -2653,7 +2936,6 @@ static inline u16 dpaa_get_headroom(stru static int dpaa_eth_probe(struct platform_device *pdev) { struct dpaa_bp *dpaa_bps[DPAA_BPS_NUM] = {NULL}; @@ -981,13 +1312,51 @@ Signed-off-by: Biwen Li struct net_device *net_dev = NULL; struct dpaa_fq *dpaa_fq, *tmp; struct dpaa_priv *priv = NULL; -@@ -2662,7 +2850,13 @@ static int dpaa_eth_probe(struct platfor +@@ -2662,7 +2944,51 @@ static int dpaa_eth_probe(struct platfor int err = 0, i, channel; struct device *dev; - dev = &pdev->dev; ++ err = bman_is_probed(); ++ if (!err) ++ return -EPROBE_DEFER; ++ if (err < 0) { ++ dev_err(&pdev->dev, "failing probe due to bman probe error\n"); ++ return -ENODEV; ++ } ++ err = qman_is_probed(); ++ if (!err) ++ return -EPROBE_DEFER; ++ if (err < 0) { ++ dev_err(&pdev->dev, "failing probe due to qman probe error\n"); ++ return -ENODEV; ++ } ++ err = bman_portals_probed(); ++ if (!err) ++ return -EPROBE_DEFER; ++ if (err < 0) { ++ dev_err(&pdev->dev, ++ "failing probe due to bman portals probe error\n"); ++ return -ENODEV; ++ } ++ err = qman_portals_probed(); ++ if (!err) ++ return -EPROBE_DEFER; ++ if (err < 0) { ++ dev_err(&pdev->dev, ++ "failing probe due to qman portals probe error\n"); ++ return -ENODEV; ++ } ++ ++ mac_dev = dpaa_mac_dev_get(pdev); ++ if (IS_ERR(mac_dev)) { ++ dev_err(&pdev->dev, "dpaa_mac_dev_get() failed\n"); ++ err = PTR_ERR(mac_dev); ++ goto probe_err; ++ } ++ + /* device used for DMA mapping */ -+ dev = pdev->dev.parent; ++ dev = fman_port_get_device(mac_dev->port[RX]); + err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40)); + if (err) { + dev_err(dev, "dma_coerce_mask_and_coherent() failed\n"); @@ -996,7 +1365,7 @@ Signed-off-by: Biwen Li /* Allocate this early, so we can store relevant information in * the private area -@@ -2670,7 +2864,7 @@ static int dpaa_eth_probe(struct platfor +@@ -2670,7 +2996,7 @@ static int dpaa_eth_probe(struct platfor net_dev = alloc_etherdev_mq(sizeof(*priv), DPAA_ETH_TXQ_NUM); if (!net_dev) { dev_err(dev, "alloc_etherdev_mq() failed\n"); @@ -1005,16 +1374,21 @@ Signed-off-by: Biwen Li } /* Do this here, so we can be verbose early */ -@@ -2686,7 +2880,7 @@ static int dpaa_eth_probe(struct platfor - if (IS_ERR(mac_dev)) { - dev_err(dev, "dpaa_mac_dev_get() failed\n"); - err = PTR_ERR(mac_dev); -- goto mac_probe_failed; -+ goto free_netdev; - } +@@ -2682,13 +3008,6 @@ static int dpaa_eth_probe(struct platfor + + priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT); +- mac_dev = dpaa_mac_dev_get(pdev); +- if (IS_ERR(mac_dev)) { +- dev_err(dev, "dpaa_mac_dev_get() failed\n"); +- err = PTR_ERR(mac_dev); +- goto mac_probe_failed; +- } +- /* If fsl_fm_max_frm is set to a higher value than the all-common 1500, -@@ -2704,21 +2898,13 @@ static int dpaa_eth_probe(struct platfor + * we choose conservatively and let the user explicitly set a higher + * MTU via ifconfig. Otherwise, the user may end up with different MTUs +@@ -2704,21 +3023,13 @@ static int dpaa_eth_probe(struct platfor priv->buf_layout[RX].priv_data_size = DPAA_RX_PRIV_DATA_SIZE; /* Rx */ priv->buf_layout[TX].priv_data_size = DPAA_TX_PRIV_DATA_SIZE; /* Tx */ @@ -1040,7 +1414,7 @@ Signed-off-by: Biwen Li /* the raw size of the buffers used for reception */ dpaa_bps[i]->raw_size = bpool_buffer_raw_size(i, DPAA_BPS_NUM); /* avoid runtime computations by keeping the usable size here */ -@@ -2726,11 +2912,8 @@ static int dpaa_eth_probe(struct platfor +@@ -2726,11 +3037,8 @@ static int dpaa_eth_probe(struct platfor dpaa_bps[i]->dev = dev; err = dpaa_bp_alloc_pool(dpaa_bps[i]); @@ -1054,7 +1428,7 @@ Signed-off-by: Biwen Li priv->dpaa_bps[i] = dpaa_bps[i]; } -@@ -2741,7 +2924,7 @@ static int dpaa_eth_probe(struct platfor +@@ -2741,7 +3049,7 @@ static int dpaa_eth_probe(struct platfor err = dpaa_alloc_all_fqs(dev, &priv->dpaa_fq_list, &port_fqs); if (err < 0) { dev_err(dev, "dpaa_alloc_all_fqs() failed\n"); @@ -1063,7 +1437,7 @@ Signed-off-by: Biwen Li } priv->mac_dev = mac_dev; -@@ -2750,12 +2933,12 @@ static int dpaa_eth_probe(struct platfor +@@ -2750,12 +3058,12 @@ static int dpaa_eth_probe(struct platfor if (channel < 0) { dev_err(dev, "dpaa_get_channel() failed\n"); err = channel; @@ -1078,7 +1452,7 @@ Signed-off-by: Biwen Li * and add this pool channel to each's dequeue mask. */ dpaa_eth_add_channel(priv->channel); -@@ -2770,20 +2953,20 @@ static int dpaa_eth_probe(struct platfor +@@ -2770,20 +3078,20 @@ static int dpaa_eth_probe(struct platfor err = dpaa_eth_cgr_init(priv); if (err < 0) { dev_err(dev, "Error initializing CGR\n"); @@ -1102,7 +1476,7 @@ Signed-off-by: Biwen Li } priv->tx_headroom = dpaa_get_headroom(&priv->buf_layout[TX]); -@@ -2793,7 +2976,7 @@ static int dpaa_eth_probe(struct platfor +@@ -2793,7 +3101,7 @@ static int dpaa_eth_probe(struct platfor err = dpaa_eth_init_ports(mac_dev, dpaa_bps, DPAA_BPS_NUM, &port_fqs, &priv->buf_layout[0], dev); if (err) @@ -1111,7 +1485,7 @@ Signed-off-by: Biwen Li /* Rx traffic distribution based on keygen hashing defaults to on */ priv->keygen_in_use = true; -@@ -2802,11 +2985,7 @@ static int dpaa_eth_probe(struct platfor +@@ -2802,11 +3110,7 @@ static int dpaa_eth_probe(struct platfor if (!priv->percpu_priv) { dev_err(dev, "devm_alloc_percpu() failed\n"); err = -ENOMEM; @@ -1124,7 +1498,7 @@ Signed-off-by: Biwen Li } priv->num_tc = 1; -@@ -2815,11 +2994,11 @@ static int dpaa_eth_probe(struct platfor +@@ -2815,11 +3119,11 @@ static int dpaa_eth_probe(struct platfor /* Initialize NAPI */ err = dpaa_napi_add(net_dev); if (err < 0) @@ -1138,7 +1512,7 @@ Signed-off-by: Biwen Li dpaa_eth_sysfs_init(&net_dev->dev); -@@ -2828,32 +3007,21 @@ static int dpaa_eth_probe(struct platfor +@@ -2828,32 +3132,21 @@ static int dpaa_eth_probe(struct platfor return 0; @@ -1165,7 +1539,6 @@ Signed-off-by: Biwen Li -fq_probe_failed: -dev_mask_failed: -mac_probe_failed: -+free_netdev: dev_set_drvdata(dev, NULL); free_netdev(net_dev); -alloc_etherdev_mq_failed: @@ -1173,11 +1546,12 @@ Signed-off-by: Biwen Li - if (atomic_read(&dpaa_bps[i]->refs) == 0) - devm_kfree(dev, dpaa_bps[i]); - } ++probe_err: + return err; } -@@ -2890,6 +3058,23 @@ static int dpaa_remove(struct platform_d +@@ -2890,6 +3183,23 @@ static int dpaa_remove(struct platform_d return err; } @@ -1201,7 +1575,7 @@ Signed-off-by: Biwen Li static const struct platform_device_id dpaa_devtype[] = { { .name = "dpaa-ethernet", -@@ -2914,6 +3099,10 @@ static int __init dpaa_load(void) +@@ -2914,6 +3224,10 @@ static int __init dpaa_load(void) pr_debug("FSL DPAA Ethernet driver\n"); @@ -1212,9 +1586,31 @@ Signed-off-by: Biwen Li /* initialize dpaa_eth mirror values */ dpaa_rx_extra_headroom = fman_get_rx_extra_headroom(); dpaa_max_frm = fman_get_max_frm(); +--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h ++++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h +@@ -182,6 +182,9 @@ struct dpaa_priv { + + struct dpaa_buffer_layout buf_layout[2]; + u16 rx_headroom; ++ ++ bool tx_tstamp; /* Tx timestamping enabled */ ++ bool rx_tstamp; /* Rx timestamping enabled */ + }; + + /* from dpaa_ethtool.c */ --- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c -@@ -344,7 +344,7 @@ static void dpaa_get_ethtool_stats(struc +@@ -32,6 +32,9 @@ + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include ++#include ++#include ++#include + + #include "dpaa_eth.h" + #include "mac.h" +@@ -344,7 +347,7 @@ static void dpaa_get_ethtool_stats(struc /* gather congestion related counters */ cg_num = 0; @@ -1223,6 +1619,54 @@ Signed-off-by: Biwen Li cg_time = jiffies_to_msecs(priv->cgr_data.congested_jiffies); if (qman_query_cgr_congested(&priv->cgr_data.cgr, &cg_status) == 0) { cg_num = priv->cgr_data.cgr_congested_count; +@@ -515,6 +518,41 @@ static int dpaa_set_rxnfc(struct net_dev + return ret; + } + ++static int dpaa_get_ts_info(struct net_device *net_dev, ++ struct ethtool_ts_info *info) ++{ ++ struct device *dev = net_dev->dev.parent; ++ struct device_node *mac_node = dev->of_node; ++ struct device_node *fman_node = NULL, *ptp_node = NULL; ++ struct platform_device *ptp_dev = NULL; ++ struct qoriq_ptp *ptp = NULL; ++ ++ info->phc_index = -1; ++ ++ fman_node = of_get_parent(mac_node); ++ if (fman_node) ++ ptp_node = of_parse_phandle(fman_node, "ptimer-handle", 0); ++ ++ if (ptp_node) ++ ptp_dev = of_find_device_by_node(ptp_node); ++ ++ if (ptp_dev) ++ ptp = platform_get_drvdata(ptp_dev); ++ ++ if (ptp) ++ info->phc_index = ptp->phc_index; ++ ++ info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE | ++ SOF_TIMESTAMPING_RX_HARDWARE | ++ SOF_TIMESTAMPING_RAW_HARDWARE; ++ info->tx_types = (1 << HWTSTAMP_TX_OFF) | ++ (1 << HWTSTAMP_TX_ON); ++ info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | ++ (1 << HWTSTAMP_FILTER_ALL); ++ ++ return 0; ++} ++ + const struct ethtool_ops dpaa_ethtool_ops = { + .get_drvinfo = dpaa_get_drvinfo, + .get_msglevel = dpaa_get_msglevel, +@@ -530,4 +568,5 @@ const struct ethtool_ops dpaa_ethtool_op + .set_link_ksettings = dpaa_set_link_ksettings, + .get_rxnfc = dpaa_get_rxnfc, + .set_rxnfc = dpaa_set_rxnfc, ++ .get_ts_info = dpaa_get_ts_info, + }; --- a/drivers/net/ethernet/freescale/fman/Kconfig +++ b/drivers/net/ethernet/freescale/fman/Kconfig @@ -2,7 +2,6 @@ config FSL_FMAN @@ -1252,12 +1696,141 @@ Signed-off-by: Biwen Li +fsl_dpaa_fman-objs := fman_muram.o fman.o fman_sp.o fman_keygen.o +fsl_dpaa_fman_port-objs := fman_port.o +fsl_dpaa_mac-objs:= mac.o fman_dtsec.o fman_memac.o fman_tgec.o +--- a/drivers/net/ethernet/freescale/fman/fman.c ++++ b/drivers/net/ethernet/freescale/fman/fman.c +@@ -629,6 +629,7 @@ static void set_port_order_restoration(s + iowrite32be(tmp, &fpm_rg->fmfp_prc); + } + ++#ifdef CONFIG_PPC + static void set_port_liodn(struct fman *fman, u8 port_id, + u32 liodn_base, u32 liodn_ofst) + { +@@ -646,6 +647,27 @@ static void set_port_liodn(struct fman * + iowrite32be(tmp, &fman->dma_regs->fmdmplr[port_id / 2]); + iowrite32be(liodn_ofst, &fman->bmi_regs->fmbm_spliodn[port_id - 1]); + } ++#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64) ++static void save_restore_port_icids(struct fman *fman, bool save) ++{ ++ int port_idxes[] = { ++ 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, 0xc, ++ 0xd, 0xe, 0xf, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, ++ 0x10, 0x11, 0x30, 0x31 ++ }; ++ int idx, i; ++ ++ for (i = 0; i < ARRAY_SIZE(port_idxes); i++) { ++ idx = port_idxes[i]; ++ if (save) ++ fman->sp_icids[idx] = ++ ioread32be(&fman->bmi_regs->fmbm_spliodn[idx]); ++ else ++ iowrite32be(fman->sp_icids[idx], ++ &fman->bmi_regs->fmbm_spliodn[idx]); ++ } ++} ++#endif + + static void enable_rams_ecc(struct fman_fpm_regs __iomem *fpm_rg) + { +@@ -1914,7 +1936,10 @@ _return: + static int fman_init(struct fman *fman) + { + struct fman_cfg *cfg = NULL; +- int err = 0, i, count; ++ int err = 0, count; ++#ifdef CONFIG_PPC ++ int i; ++#endif + + if (is_init_done(fman->cfg)) + return -EINVAL; +@@ -1934,6 +1959,7 @@ static int fman_init(struct fman *fman) + memset_io((void __iomem *)(fman->base_addr + CGP_OFFSET), 0, + fman->state->fm_port_num_of_cg); + ++#ifdef CONFIG_PPC + /* Save LIODN info before FMan reset + * Skipping non-existent port 0 (i = 1) + */ +@@ -1953,6 +1979,9 @@ static int fman_init(struct fman *fman) + } + fman->liodn_base[i] = liodn_base; + } ++#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64) ++ save_restore_port_icids(fman, true); ++#endif + + err = fman_reset(fman); + if (err) +@@ -2181,8 +2210,12 @@ int fman_set_port_params(struct fman *fm + if (err) + goto return_err; + ++#ifdef CONFIG_PPC + set_port_liodn(fman, port_id, fman->liodn_base[port_id], + fman->liodn_offset[port_id]); ++#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64) ++ save_restore_port_icids(fman, false); ++#endif + + if (fman->state->rev_info.major < 6) + set_port_order_restoration(fman->fpm_regs, port_id); +@@ -2800,7 +2833,8 @@ static struct fman *read_dts_node(struct + + of_node_put(muram_node); + +- err = devm_request_irq(&of_dev->dev, irq, fman_irq, 0, "fman", fman); ++ err = devm_request_irq(&of_dev->dev, irq, fman_irq, IRQF_SHARED, ++ "fman", fman); + if (err < 0) { + dev_err(&of_dev->dev, "%s: irq %d allocation failed (error = %d)\n", + __func__, irq, err); +--- a/drivers/net/ethernet/freescale/fman/fman.h ++++ b/drivers/net/ethernet/freescale/fman/fman.h +@@ -41,6 +41,7 @@ + /* Frame queue Context Override */ + #define FM_FD_CMD_FCO 0x80000000 + #define FM_FD_CMD_RPD 0x40000000 /* Read Prepended Data */ ++#define FM_FD_CMD_UPD 0x20000000 /* Update Prepended Data */ + #define FM_FD_CMD_DTC 0x10000000 /* Do L4 Checksum */ + + /* TX-Port: Unsupported Format */ +@@ -345,8 +346,12 @@ struct fman { + unsigned long fifo_offset; + size_t fifo_size; + ++#ifdef CONFIG_PPC + u32 liodn_base[64]; + u32 liodn_offset[64]; ++#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64) ++ u32 sp_icids[64]; ++#endif + + struct fman_dts_params dts_params; + }; --- a/drivers/net/ethernet/freescale/fman/fman_dtsec.c +++ b/drivers/net/ethernet/freescale/fman/fman_dtsec.c -@@ -1117,6 +1117,25 @@ int dtsec_add_hash_mac_address(struct fm +@@ -123,11 +123,13 @@ + #define DTSEC_ECNTRL_R100M 0x00000008 + #define DTSEC_ECNTRL_QSGMIIM 0x00000001 + ++#define TCTRL_TTSE 0x00000040 + #define TCTRL_GTS 0x00000020 + + #define RCTRL_PAL_MASK 0x001f0000 + #define RCTRL_PAL_SHIFT 16 + #define RCTRL_GHTX 0x00000400 ++#define RCTRL_RTSE 0x00000040 + #define RCTRL_GRS 0x00000020 + #define RCTRL_MPROM 0x00000008 + #define RCTRL_RSF 0x00000004 +@@ -1116,6 +1118,50 @@ int dtsec_add_hash_mac_address(struct fm + return 0; } - ++ +int dtsec_set_allmulti(struct fman_mac *dtsec, bool enable) +{ + u32 tmp; @@ -1277,16 +1850,41 @@ Signed-off-by: Biwen Li + return 0; +} + ++int dtsec_set_tstamp(struct fman_mac *dtsec, bool enable) ++{ ++ struct dtsec_regs __iomem *regs = dtsec->regs; ++ u32 rctrl, tctrl; ++ ++ if (!is_init_done(dtsec->dtsec_drv_param)) ++ return -EINVAL; ++ ++ rctrl = ioread32be(®s->rctrl); ++ tctrl = ioread32be(®s->tctrl); ++ ++ if (enable) { ++ rctrl |= RCTRL_RTSE; ++ tctrl |= TCTRL_TTSE; ++ } else { ++ rctrl &= ~RCTRL_RTSE; ++ tctrl &= ~TCTRL_TTSE; ++ } ++ ++ iowrite32be(rctrl, ®s->rctrl); ++ iowrite32be(tctrl, ®s->tctrl); ++ ++ return 0; ++} + int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr) { - struct dtsec_regs __iomem *regs = dtsec->regs; --- a/drivers/net/ethernet/freescale/fman/fman_dtsec.h +++ b/drivers/net/ethernet/freescale/fman/fman_dtsec.h -@@ -55,5 +55,6 @@ int dtsec_set_exception(struct fman_mac +@@ -55,5 +55,7 @@ int dtsec_set_exception(struct fman_mac int dtsec_add_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr); int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr); int dtsec_get_version(struct fman_mac *dtsec, u32 *mac_version); +int dtsec_set_allmulti(struct fman_mac *dtsec, bool enable); ++int dtsec_set_tstamp(struct fman_mac *dtsec, bool enable); #endif /* __DTSEC_H */ --- a/drivers/net/ethernet/freescale/fman/fman_memac.c @@ -1299,7 +1897,7 @@ Signed-off-by: Biwen Li }; static void add_addr_in_paddr(struct memac_regs __iomem *regs, u8 *adr, -@@ -940,6 +941,29 @@ int memac_add_hash_mac_address(struct fm +@@ -940,6 +941,34 @@ int memac_add_hash_mac_address(struct fm return 0; } @@ -1325,11 +1923,16 @@ Signed-off-by: Biwen Li + + return 0; +} ++ ++int memac_set_tstamp(struct fman_mac *memac, bool enable) ++{ ++ return 0; /* Always enabled. */ ++} + int memac_del_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr) { struct memac_regs __iomem *regs = memac->regs; -@@ -963,8 +987,12 @@ int memac_del_hash_mac_address(struct fm +@@ -963,8 +992,12 @@ int memac_del_hash_mac_address(struct fm break; } } @@ -1346,11 +1949,12 @@ Signed-off-by: Biwen Li } --- a/drivers/net/ethernet/freescale/fman/fman_memac.h +++ b/drivers/net/ethernet/freescale/fman/fman_memac.h -@@ -57,5 +57,6 @@ int memac_set_exception(struct fman_mac +@@ -57,5 +57,7 @@ int memac_set_exception(struct fman_mac enum fman_mac_exceptions exception, bool enable); int memac_add_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr); int memac_del_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr); +int memac_set_allmulti(struct fman_mac *memac, bool enable); ++int memac_set_tstamp(struct fman_mac *memac, bool enable); #endif /* __MEMAC_H */ --- a/drivers/net/ethernet/freescale/fman/fman_port.c @@ -1366,9 +1970,70 @@ Signed-off-by: Biwen Li default: set_dflt_cfg(port, params); } +@@ -1728,6 +1730,20 @@ u32 fman_port_get_qman_channel_id(struct + } + EXPORT_SYMBOL(fman_port_get_qman_channel_id); + ++/** ++ * fman_port_get_device ++ * port: Pointer to the FMan port device ++ * ++ * Get the 'struct device' associated to the specified FMan port device ++ * ++ * Return: pointer to associated 'struct device' ++ */ ++struct device *fman_port_get_device(struct fman_port *port) ++{ ++ return port->dev; ++} ++EXPORT_SYMBOL(fman_port_get_device); ++ + int fman_port_get_hash_result_offset(struct fman_port *port, u32 *offset) + { + if (port->buffer_offsets.hash_result_offset == ILLEGAL_BASE) +@@ -1739,6 +1755,18 @@ int fman_port_get_hash_result_offset(str + } + EXPORT_SYMBOL(fman_port_get_hash_result_offset); + ++int fman_port_get_tstamp(struct fman_port *port, const void *data, u64 *tstamp) ++{ ++ if (port->buffer_offsets.time_stamp_offset == ILLEGAL_BASE) ++ return -EINVAL; ++ ++ *tstamp = be64_to_cpu(*(__be64 *)(data + ++ port->buffer_offsets.time_stamp_offset)); ++ ++ return 0; ++} ++EXPORT_SYMBOL(fman_port_get_tstamp); ++ + static int fman_port_probe(struct platform_device *of_dev) + { + struct fman_port *port; +--- a/drivers/net/ethernet/freescale/fman/fman_port.h ++++ b/drivers/net/ethernet/freescale/fman/fman_port.h +@@ -153,6 +153,10 @@ u32 fman_port_get_qman_channel_id(struct + + int fman_port_get_hash_result_offset(struct fman_port *port, u32 *offset); + ++int fman_port_get_tstamp(struct fman_port *port, const void *data, u64 *tstamp); ++ + struct fman_port *fman_port_bind(struct device *dev); + ++struct device *fman_port_get_device(struct fman_port *port); ++ + #endif /* __FMAN_PORT_H */ --- a/drivers/net/ethernet/freescale/fman/fman_tgec.c +++ b/drivers/net/ethernet/freescale/fman/fman_tgec.c -@@ -217,6 +217,7 @@ struct fman_mac { +@@ -44,6 +44,7 @@ + #define TGEC_TX_IPG_LENGTH_MASK 0x000003ff + + /* Command and Configuration Register (COMMAND_CONFIG) */ ++#define CMD_CFG_EN_TIMESTAMP 0x00100000 + #define CMD_CFG_NO_LEN_CHK 0x00020000 + #define CMD_CFG_PAUSE_IGNORE 0x00000100 + #define CMF_CFG_CRC_FWD 0x00000040 +@@ -217,6 +218,7 @@ struct fman_mac { struct tgec_cfg *cfg; void *fm; struct fman_rev_info fm_rev_info; @@ -1376,7 +2041,7 @@ Signed-off-by: Biwen Li }; static void set_mac_address(struct tgec_regs __iomem *regs, u8 *adr) -@@ -564,6 +565,29 @@ int tgec_add_hash_mac_address(struct fma +@@ -564,6 +566,49 @@ int tgec_add_hash_mac_address(struct fma return 0; } @@ -1402,11 +2067,31 @@ Signed-off-by: Biwen Li + + return 0; +} ++ ++int tgec_set_tstamp(struct fman_mac *tgec, bool enable) ++{ ++ struct tgec_regs __iomem *regs = tgec->regs; ++ u32 tmp; ++ ++ if (!is_init_done(tgec->cfg)) ++ return -EINVAL; ++ ++ tmp = ioread32be(®s->command_config); ++ ++ if (enable) ++ tmp |= CMD_CFG_EN_TIMESTAMP; ++ else ++ tmp &= ~CMD_CFG_EN_TIMESTAMP; ++ ++ iowrite32be(tmp, ®s->command_config); ++ ++ return 0; ++} + int tgec_del_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr) { struct tgec_regs __iomem *regs = tgec->regs; -@@ -591,9 +615,12 @@ int tgec_del_hash_mac_address(struct fma +@@ -591,9 +636,12 @@ int tgec_del_hash_mac_address(struct fma break; } } @@ -1424,11 +2109,12 @@ Signed-off-by: Biwen Li } --- a/drivers/net/ethernet/freescale/fman/fman_tgec.h +++ b/drivers/net/ethernet/freescale/fman/fman_tgec.h -@@ -51,5 +51,6 @@ int tgec_set_exception(struct fman_mac * +@@ -51,5 +51,7 @@ int tgec_set_exception(struct fman_mac * int tgec_add_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr); int tgec_del_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr); int tgec_get_version(struct fman_mac *tgec, u32 *mac_version); +int tgec_set_allmulti(struct fman_mac *tgec, bool enable); ++int tgec_set_tstamp(struct fman_mac *tgec, bool enable); #endif /* __TGEC_H */ --- a/drivers/net/ethernet/freescale/fman/mac.c @@ -1551,11 +2237,12 @@ Signed-off-by: Biwen Li mac_dev->init = dtsec_initialization; mac_dev->set_promisc = dtsec_set_promiscuous; mac_dev->change_addr = dtsec_modify_mac_address; -@@ -525,17 +470,17 @@ static void setup_dtsec(struct mac_devic +@@ -525,17 +470,18 @@ static void setup_dtsec(struct mac_devic mac_dev->set_tx_pause = dtsec_set_tx_pause_frames; mac_dev->set_rx_pause = dtsec_accept_rx_pause_frames; mac_dev->set_exception = dtsec_set_exception; + mac_dev->set_allmulti = dtsec_set_allmulti; ++ mac_dev->set_tstamp = dtsec_set_tstamp; mac_dev->set_multi = set_multi; mac_dev->start = start; mac_dev->stop = stop; @@ -1571,11 +2258,12 @@ Signed-off-by: Biwen Li mac_dev->init = tgec_initialization; mac_dev->set_promisc = tgec_set_promiscuous; mac_dev->change_addr = tgec_modify_mac_address; -@@ -544,17 +489,17 @@ static void setup_tgec(struct mac_device +@@ -544,17 +490,18 @@ static void setup_tgec(struct mac_device mac_dev->set_tx_pause = tgec_set_tx_pause_frames; mac_dev->set_rx_pause = tgec_accept_rx_pause_frames; mac_dev->set_exception = tgec_set_exception; + mac_dev->set_allmulti = tgec_set_allmulti; ++ mac_dev->set_tstamp = tgec_set_tstamp; mac_dev->set_multi = set_multi; mac_dev->start = start; mac_dev->stop = stop; @@ -1591,11 +2279,12 @@ Signed-off-by: Biwen Li mac_dev->init = memac_initialization; mac_dev->set_promisc = memac_set_promiscuous; mac_dev->change_addr = memac_modify_mac_address; -@@ -563,10 +508,11 @@ static void setup_memac(struct mac_devic +@@ -563,10 +510,12 @@ static void setup_memac(struct mac_devic mac_dev->set_tx_pause = memac_set_tx_pause_frames; mac_dev->set_rx_pause = memac_accept_rx_pause_frames; mac_dev->set_exception = memac_set_exception; + mac_dev->set_allmulti = memac_set_allmulti; ++ mac_dev->set_tstamp = memac_set_tstamp; mac_dev->set_multi = set_multi; mac_dev->start = start; mac_dev->stop = stop; @@ -1604,7 +2293,7 @@ Signed-off-by: Biwen Li mac_dev->priv->enable = memac_enable; mac_dev->priv->disable = memac_disable; } -@@ -599,8 +545,7 @@ static const u16 phy2speed[] = { +@@ -599,8 +548,7 @@ static const u16 phy2speed[] = { }; static struct platform_device *dpaa_eth_add_device(int fman_id, @@ -1614,7 +2303,7 @@ Signed-off-by: Biwen Li { struct platform_device *pdev; struct dpaa_eth_data data; -@@ -613,19 +558,15 @@ static struct platform_device *dpaa_eth_ +@@ -613,19 +561,15 @@ static struct platform_device *dpaa_eth_ data.mac_dev = mac_dev; data.mac_hw_id = priv->cell_index; data.fman_hw_id = fman_id; @@ -1634,7 +2323,7 @@ Signed-off-by: Biwen Li ret = platform_device_add_data(pdev, &data, sizeof(data)); if (ret) -@@ -676,7 +617,6 @@ static int mac_probe(struct platform_dev +@@ -676,7 +620,6 @@ static int mac_probe(struct platform_dev mac_dev = devm_kzalloc(dev, sizeof(*mac_dev), GFP_KERNEL); if (!mac_dev) { err = -ENOMEM; @@ -1642,7 +2331,7 @@ Signed-off-by: Biwen Li goto _return; } priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -@@ -706,9 +646,6 @@ static int mac_probe(struct platform_dev +@@ -706,9 +649,6 @@ static int mac_probe(struct platform_dev goto _return; } @@ -1652,7 +2341,7 @@ Signed-off-by: Biwen Li INIT_LIST_HEAD(&priv->mc_addr_list); /* Get the FM node */ -@@ -717,7 +654,7 @@ static int mac_probe(struct platform_dev +@@ -717,7 +657,7 @@ static int mac_probe(struct platform_dev dev_err(dev, "of_get_parent(%pOF) failed\n", mac_node); err = -EINVAL; @@ -1661,7 +2350,7 @@ Signed-off-by: Biwen Li } of_dev = of_find_device_by_node(dev_node); -@@ -751,7 +688,7 @@ static int mac_probe(struct platform_dev +@@ -751,7 +691,7 @@ static int mac_probe(struct platform_dev if (err < 0) { dev_err(dev, "of_address_to_resource(%pOF) = %d\n", mac_node, err); @@ -1670,7 +2359,7 @@ Signed-off-by: Biwen Li } mac_dev->res = __devm_request_region(dev, -@@ -761,7 +698,7 @@ static int mac_probe(struct platform_dev +@@ -761,7 +701,7 @@ static int mac_probe(struct platform_dev if (!mac_dev->res) { dev_err(dev, "__devm_request_mem_region(mac) failed\n"); err = -EBUSY; @@ -1679,7 +2368,7 @@ Signed-off-by: Biwen Li } priv->vaddr = devm_ioremap(dev, mac_dev->res->start, -@@ -769,16 +706,12 @@ static int mac_probe(struct platform_dev +@@ -769,16 +709,12 @@ static int mac_probe(struct platform_dev if (!priv->vaddr) { dev_err(dev, "devm_ioremap() failed\n"); err = -EIO; @@ -1699,7 +2388,7 @@ Signed-off-by: Biwen Li } /* Get the cell-index */ -@@ -786,7 +719,7 @@ static int mac_probe(struct platform_dev +@@ -786,7 +722,7 @@ static int mac_probe(struct platform_dev if (err) { dev_err(dev, "failed to read cell-index for %pOF\n", mac_node); err = -EINVAL; @@ -1708,7 +2397,7 @@ Signed-off-by: Biwen Li } priv->cell_index = (u8)val; -@@ -795,7 +728,7 @@ static int mac_probe(struct platform_dev +@@ -795,7 +731,7 @@ static int mac_probe(struct platform_dev if (!mac_addr) { dev_err(dev, "of_get_mac_address(%pOF) failed\n", mac_node); err = -EINVAL; @@ -1717,7 +2406,7 @@ Signed-off-by: Biwen Li } memcpy(mac_dev->addr, mac_addr, sizeof(mac_dev->addr)); -@@ -805,14 +738,14 @@ static int mac_probe(struct platform_dev +@@ -805,14 +741,14 @@ static int mac_probe(struct platform_dev dev_err(dev, "of_count_phandle_with_args(%pOF, fsl,fman-ports) failed\n", mac_node); err = nph; @@ -1734,7 +2423,7 @@ Signed-off-by: Biwen Li } for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) { -@@ -851,13 +784,13 @@ static int mac_probe(struct platform_dev +@@ -851,13 +787,13 @@ static int mac_probe(struct platform_dev mac_node); phy_if = PHY_INTERFACE_MODE_SGMII; } @@ -1751,7 +2440,7 @@ Signed-off-by: Biwen Li mac_dev->if_support &= ~(SUPPORTED_10baseT_Half | SUPPORTED_100baseT_Half); -@@ -866,30 +799,31 @@ static int mac_probe(struct platform_dev +@@ -866,30 +802,31 @@ static int mac_probe(struct platform_dev mac_dev->if_support |= SUPPORTED_1000baseT_Full; /* The 10G interface only supports one mode */ @@ -1791,7 +2480,7 @@ Signed-off-by: Biwen Li } priv->fixed_link->link = phy->link; -@@ -904,8 +838,8 @@ static int mac_probe(struct platform_dev +@@ -904,8 +841,8 @@ static int mac_probe(struct platform_dev err = mac_dev->init(mac_dev); if (err < 0) { dev_err(dev, "mac_dev->init() = %d\n", err); @@ -1802,7 +2491,7 @@ Signed-off-by: Biwen Li } /* pause frame autonegotiation enabled */ -@@ -926,7 +860,7 @@ static int mac_probe(struct platform_dev +@@ -926,7 +863,7 @@ static int mac_probe(struct platform_dev mac_dev->addr[0], mac_dev->addr[1], mac_dev->addr[2], mac_dev->addr[3], mac_dev->addr[4], mac_dev->addr[5]); @@ -1811,7 +2500,7 @@ Signed-off-by: Biwen Li if (IS_ERR(priv->eth_dev)) { dev_err(dev, "failed to add Ethernet platform device for MAC %d\n", priv->cell_index); -@@ -937,9 +871,8 @@ static int mac_probe(struct platform_dev +@@ -937,9 +874,8 @@ static int mac_probe(struct platform_dev _return_of_node_put: of_node_put(dev_node); @@ -1833,7 +2522,7 @@ Signed-off-by: Biwen Li bool autoneg_pause; bool rx_pause_req; -@@ -57,14 +59,15 @@ struct mac_device { +@@ -57,14 +59,16 @@ struct mac_device { bool rx_pause_active; bool tx_pause_active; bool promisc; @@ -1848,10 +2537,11 @@ Signed-off-by: Biwen Li int (*set_promisc)(struct fman_mac *mac_dev, bool enable); int (*change_addr)(struct fman_mac *mac_dev, enet_addr_t *enet_addr); + int (*set_allmulti)(struct fman_mac *mac_dev, bool enable); ++ int (*set_tstamp)(struct fman_mac *mac_dev, bool enable); int (*set_multi)(struct net_device *net_dev, struct mac_device *mac_dev); int (*set_rx_pause)(struct fman_mac *mac_dev, bool en); -@@ -82,7 +85,6 @@ struct mac_device { +@@ -82,7 +86,6 @@ struct mac_device { }; struct dpaa_eth_data { @@ -1861,7 +2551,7 @@ Signed-off-by: Biwen Li int fman_hw_id; --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig -@@ -0,0 +1,195 @@ +@@ -0,0 +1,184 @@ +menuconfig FSL_SDK_DPAA_ETH + tristate "DPAA Ethernet" + depends on (FSL_SOC || ARM64 || ARM) && FSL_SDK_BMAN && FSL_SDK_QMAN && FSL_SDK_FMAN && !FSL_DPAA_ETH @@ -1888,7 +2578,7 @@ Signed-off-by: Biwen Li + hex "CEETM egress congestion threshold on 1G ports" + depends on FSL_DPAA_CEETM + range 0x1000 0x10000000 -+ default "0x000a0000" ++ default "0x00005000" + help + The size in bytes of the CEETM egress Class Congestion State threshold on 1G ports. + The threshold needs to be configured keeping in mind the following factors: @@ -1902,7 +2592,7 @@ Signed-off-by: Biwen Li + hex "CEETM egress congestion threshold on 10G ports" + depends on FSL_DPAA_CEETM + range 0x1000 0x20000000 -+ default "0x00640000" ++ default "0x00032000" + help + The size in bytes of the CEETM egress Class Congestion State threshold on 10G ports. + See FSL_DPAA_CEETM_CCS_THRESHOLD_1G for details. @@ -1960,17 +2650,6 @@ Signed-off-by: Biwen Li + help + Enable IEEE1588 support code. + -+config FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE -+ bool "Use driver's Tx queue selection mechanism" -+ default y -+ depends on FSL_SDK_DPAA_ETH -+ help -+ The DPAA-Ethernet driver defines a ndo_select_queue() callback for optimal selection -+ of the egress FQ. That will override the XPS support for this netdevice. -+ If for whatever reason you want to be in control of the egress FQ-to-CPU selection and mapping, -+ or simply don't want to use the driver's ndo_select_queue() callback, then unselect this -+ and use the standard XPS support instead. -+ +config FSL_DPAA_ETH_MAX_BUF_COUNT + int "Maximum nuber of buffers in private bpool" + depends on FSL_SDK_DPAA_ETH @@ -2042,7 +2721,7 @@ Signed-off-by: Biwen Li + +config FSL_DPAA_DBG_LOOP + bool "DPAA Ethernet Debug loopback" -+ depends on FSL_DPAA_ETH_DEBUGFS && FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE ++ depends on FSL_DPAA_ETH_DEBUGFS + default n + help + This option allows to divert all received traffic on a certain interface A towards a @@ -2059,7 +2738,7 @@ Signed-off-by: Biwen Li +endif # FSL_SDK_DPAA_ETH --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/Makefile -@@ -0,0 +1,46 @@ +@@ -0,0 +1,45 @@ +# +# Makefile for the Freescale Ethernet controllers +# @@ -2071,7 +2750,6 @@ Signed-off-by: Biwen Li +ccflags-y += -I$(NET_DPA) + +obj-$(CONFIG_FSL_SDK_DPAA_ETH) += fsl_mac.o fsl_dpa.o -+obj-$(CONFIG_PTP_1588_CLOCK_DPAA) += dpaa_ptp.o + +fsl_dpa-objs += dpaa_ethtool.o dpaa_eth_sysfs.o dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o +ifeq ($(CONFIG_FSL_DPAA_DBG_LOOP),y) @@ -3742,7 +4420,7 @@ Signed-off-by: Biwen Li + .ndo_get_stats64 = dpa_get_stats64, + .ndo_set_mac_address = dpa_set_mac_address, + .ndo_validate_addr = eth_validate_addr, -+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE ++#ifdef CONFIG_FMAN_PFC + .ndo_select_queue = dpa_select_queue, +#endif + .ndo_set_rx_mode = dpa_set_rx_mode, @@ -4287,7 +4965,7 @@ Signed-off-by: Biwen Li +module_exit(dpa_unload); --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h -@@ -0,0 +1,691 @@ +@@ -0,0 +1,674 @@ +/* Copyright 2008-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -4925,33 +5603,15 @@ Signed-off-by: Biwen Li + } +} + -+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE -+/* Use in lieu of skb_get_queue_mapping() */ +#ifdef CONFIG_FMAN_PFC ++/* Use in lieu of skb_get_queue_mapping() */ +#define dpa_get_queue_mapping(skb) \ + (((skb)->priority < CONFIG_FMAN_PFC_COS_COUNT) ? \ + ((skb)->priority * dpa_num_cpus + smp_processor_id()) : \ + ((CONFIG_FMAN_PFC_COS_COUNT - 1) * \ + dpa_num_cpus + smp_processor_id())); -+ +#else -+#define dpa_get_queue_mapping(skb) \ -+ raw_smp_processor_id() -+#endif -+#else -+/* Use the queue selected by XPS */ -+#define dpa_get_queue_mapping(skb) \ -+ skb_get_queue_mapping(skb) -+#endif -+ -+#ifdef CONFIG_PTP_1588_CLOCK_DPAA -+struct ptp_priv_s { -+ struct device_node *node; -+ struct platform_device *of_dev; -+ struct ptp_clock *clock; -+ struct mac_device *mac_dev; -+}; -+extern struct ptp_priv_s ptp_priv; ++#define dpa_get_queue_mapping(skb) skb_get_queue_mapping(skb) +#endif + +static inline void _dpa_bp_free_pf(void *addr) @@ -4961,9 +5621,10 @@ Signed-off-by: Biwen Li + +/* LS1043A SoC has a HW issue regarding FMan DMA transactions; The issue + * manifests itself at high traffic rates when frames cross 4K memory -+ * boundaries or when they are not aligned to 16 bytes; For the moment, we -+ * use a SW workaround that realigns frames to 256 bytes. Scatter/Gather -+ * frames aren't supported on egress. ++ * boundaries, when they are not aligned to 16 bytes or when they have ++ * Scatter/Gather fragments; For the moment, we use a SW workaround that ++ * realigns frames to 256 bytes. Scatter/Gather frames aren't supported ++ * on egress. + */ + +#ifndef CONFIG_PPC @@ -5241,7 +5902,7 @@ Signed-off-by: Biwen Li +#endif /* __DPAA_ETH_BASE_H */ --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_ceetm.c -@@ -0,0 +1,2099 @@ +@@ -0,0 +1,2076 @@ +/* Copyright 2008-2016 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -5930,16 +6591,13 @@ Signed-off-by: Biwen Li + + /* Validate inputs */ + if (sch->parent != TC_H_ROOT) { -+ pr_err("CEETM: a root ceetm qdisc can not be attached to a class\n"); -+ tcf_block_put(priv->block); -+ qdisc_class_hash_destroy(&priv->clhash); ++ pr_err("CEETM: a root ceetm qdisc must be root\n"); + return -EINVAL; + } + + if (!mac_dev) { + pr_err("CEETM: the interface is lacking a mac\n"); -+ err = -EINVAL; -+ goto err_init_root; ++ return -EINVAL; + } + + /* Pre-allocate underlying pfifo qdiscs. @@ -5956,8 +6614,7 @@ Signed-off-by: Biwen Li + sizeof(priv->root.qdiscs[0]), + GFP_KERNEL); + if (!priv->root.qdiscs) { -+ err = -ENOMEM; -+ goto err_init_root; ++ return -ENOMEM; + } + + for (i = 0; i < dev->num_tx_queues; i++) { @@ -5967,10 +6624,8 @@ Signed-off-by: Biwen Li + + qdisc = qdisc_create_dflt(dev_queue, &pfifo_qdisc_ops, + parent_id); -+ if (!qdisc) { -+ err = -ENOMEM; -+ goto err_init_root; -+ } ++ if (!qdisc) ++ return -ENOMEM; + + priv->root.qdiscs[i] = qdisc; + qdisc->flags |= TCQ_F_ONETXQUEUE; @@ -5982,8 +6637,7 @@ Signed-off-by: Biwen Li + if (!priv->root.qstats) { + pr_err(KBUILD_BASENAME " : %s : alloc_percpu() failed\n", + __func__); -+ err = -ENOMEM; -+ goto err_init_root; ++ return -ENOMEM; + } + + priv->shaped = qopt->shaped; @@ -5997,7 +6651,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to claim the SP\n", + __func__); -+ goto err_init_root; ++ return err; + } + + priv->root.sp = sp; @@ -6009,7 +6663,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to claim the LNI\n", + __func__); -+ goto err_init_root; ++ return err; + } + + priv->root.lni = lni; @@ -6018,7 +6672,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to link the SP and LNI\n", + __func__); -+ goto err_init_root; ++ return err; + } + + lni->sp = sp; @@ -6029,7 +6683,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n", + __func__); -+ goto err_init_root; ++ return err; + } + + bps = priv->root.rate << 3; /* Bps -> bps */ @@ -6037,7 +6691,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n", + __func__); -+ goto err_init_root; ++ return err; + } + + bps = priv->root.ceil << 3; /* Bps -> bps */ @@ -6045,7 +6699,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to configure the LNI shaper\n", + __func__); -+ goto err_init_root; ++ return err; + } + } + @@ -6053,10 +6707,6 @@ Signed-off-by: Biwen Li + + dpa_enable_ceetm(dev); + return 0; -+ -+err_init_root: -+ ceetm_destroy(sch); -+ return err; +} + +/* Configure a prio ceetm qdisc */ @@ -6073,15 +6723,13 @@ Signed-off-by: Biwen Li + + if (sch->parent == TC_H_ROOT) { + pr_err("CEETM: a prio ceetm qdisc can not be root\n"); -+ err = -EINVAL; -+ goto err_init_prio; ++ return -EINVAL; + } + + parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent)); + if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) { + pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n"); -+ err = -EINVAL; -+ goto err_init_prio; ++ return -EINVAL; + } + + /* Obtain the parent root ceetm_class */ @@ -6089,8 +6737,7 @@ Signed-off-by: Biwen Li + + if (!parent_cl || parent_cl->type != CEETM_ROOT) { + pr_err("CEETM: a prio ceetm qdiscs can be added only under a root ceetm class\n"); -+ err = -EINVAL; -+ goto err_init_prio; ++ return -EINVAL; + } + + priv->prio.parent = parent_cl; @@ -6106,8 +6753,7 @@ Signed-off-by: Biwen Li + if (!child_cl) { + pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n", + __func__); -+ err = -ENOMEM; -+ goto err_init_prio; ++ return -ENOMEM; + } + + child_cl->prio.cstats = alloc_percpu(struct ceetm_class_stats); @@ -6150,8 +6796,7 @@ Signed-off-by: Biwen Li + +err_init_prio_cls: + ceetm_cls_destroy(sch, child_cl); -+err_init_prio: -+ ceetm_destroy(sch); ++ /* Note: ceetm_destroy() will be called by our caller */ + return err; +} + @@ -6171,16 +6816,14 @@ Signed-off-by: Biwen Li + /* Validate inputs */ + if (sch->parent == TC_H_ROOT) { + pr_err("CEETM: a wbfs ceetm qdiscs can not be root\n"); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + /* Obtain the parent prio ceetm qdisc */ + parent_qdisc = qdisc_lookup(dev, TC_H_MAJ(sch->parent)); + if (strcmp(parent_qdisc->ops->id, ceetm_qdisc_ops.id)) { + pr_err("CEETM: a ceetm qdisc can not be attached to other qdisc/class types\n"); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + /* Obtain the parent prio ceetm class */ @@ -6189,28 +6832,24 @@ Signed-off-by: Biwen Li + + if (!parent_cl || parent_cl->type != CEETM_PRIO) { + pr_err("CEETM: a wbfs ceetm qdiscs can be added only under a prio ceetm class\n"); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + if (!qopt->qcount || !qopt->qweight[0]) { + pr_err("CEETM: qcount and qweight are mandatory for a wbfs ceetm qdisc\n"); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + priv->shaped = parent_cl->shaped; + + if (!priv->shaped && (qopt->cr || qopt->er)) { + pr_err("CEETM: CR/ER can be enabled only for shaped wbfs ceetm qdiscs\n"); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + if (priv->shaped && !(qopt->cr || qopt->er)) { + pr_err("CEETM: either CR or ER must be enabled for shaped wbfs ceetm qdiscs\n"); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + /* Obtain the parent root ceetm class */ @@ -6218,16 +6857,14 @@ Signed-off-by: Biwen Li + if ((root_cl->root.wbfs_grp_a && root_cl->root.wbfs_grp_b) || + root_cl->root.wbfs_grp_large) { + pr_err("CEETM: no more wbfs classes are available\n"); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + if ((root_cl->root.wbfs_grp_a || root_cl->root.wbfs_grp_b) && + qopt->qcount == CEETM_MAX_WBFS_QCOUNT) { + pr_err("CEETM: only %d wbfs classes are available\n", + CEETM_MIN_WBFS_QCOUNT); -+ err = -EINVAL; -+ goto err_init_wbfs; ++ return -EINVAL; + } + + priv->wbfs.parent = parent_cl; @@ -6256,7 +6893,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to get group details\n", + __func__); -+ goto err_init_wbfs; ++ return err; + } + + small_group = true; @@ -6274,7 +6911,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to get group details\n", + __func__); -+ goto err_init_wbfs; ++ return err; + } + + small_group = true; @@ -6287,7 +6924,7 @@ Signed-off-by: Biwen Li + err = qman_ceetm_channel_set_group(priv->wbfs.ch, small_group, prio_a, + prio_b); + if (err) -+ goto err_init_wbfs; ++ return err; + + if (priv->shaped) { + err = qman_ceetm_channel_set_group_cr_eligibility(priv->wbfs.ch, @@ -6296,7 +6933,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to set group CR eligibility\n", + __func__); -+ goto err_init_wbfs; ++ return err; + } + + err = qman_ceetm_channel_set_group_er_eligibility(priv->wbfs.ch, @@ -6305,7 +6942,7 @@ Signed-off-by: Biwen Li + if (err) { + pr_err(KBUILD_BASENAME " : %s : failed to set group ER eligibility\n", + __func__); -+ goto err_init_wbfs; ++ return err; + } + } + @@ -6315,8 +6952,7 @@ Signed-off-by: Biwen Li + if (!child_cl) { + pr_err(KBUILD_BASENAME " : %s : kzalloc() failed\n", + __func__); -+ err = -ENOMEM; -+ goto err_init_wbfs; ++ return -ENOMEM; + } + + child_cl->wbfs.cstats = alloc_percpu(struct ceetm_class_stats); @@ -6373,8 +7009,7 @@ Signed-off-by: Biwen Li + +err_init_wbfs_cls: + ceetm_cls_destroy(sch, child_cl); -+err_init_wbfs: -+ ceetm_destroy(sch); ++ /* Note: ceetm_destroy() will be called by our caller */ + return err; +} + @@ -6444,7 +7079,7 @@ Signed-off-by: Biwen Li + break; + default: + pr_err(KBUILD_BASENAME " : %s : invalid qdisc\n", __func__); -+ ceetm_destroy(sch); ++ /* Note: ceetm_destroy() will be called by our caller */ + ret = -EINVAL; + } + @@ -6789,7 +7424,7 @@ Signed-off-by: Biwen Li + } + + if (!cl && priv->type != CEETM_ROOT) { -+ pr_err("CEETM: only root ceetm classes can be attached to the root ceetm qdisc\n"); ++ pr_err("CEETM: root ceetm classes can be attached to the root ceetm qdisc only\n"); + return -EINVAL; + } + @@ -7246,7 +7881,7 @@ Signed-off-by: Biwen Li + +int __hot ceetm_tx(struct sk_buff *skb, struct net_device *net_dev) +{ -+ const int queue_mapping = dpa_get_queue_mapping(skb); ++ int queue_mapping = dpa_get_queue_mapping(skb); + struct Qdisc *sch = net_dev->qdisc; + struct ceetm_class_stats *cstats; + struct ceetm_qdisc_stats *qstats; @@ -7280,6 +7915,9 @@ Signed-off-by: Biwen Li + goto drop; + } + ++ if (unlikely(queue_mapping >= DPAA_ETH_TX_QUEUES)) ++ queue_mapping = queue_mapping % DPAA_ETH_TX_QUEUES; ++ + priv_dpa = netdev_priv(net_dev); + conf_fq = priv_dpa->conf_fqs[queue_mapping]; + @@ -7587,7 +8225,7 @@ Signed-off-by: Biwen Li +#endif --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c -@@ -0,0 +1,1776 @@ +@@ -0,0 +1,1745 @@ +/* Copyright 2008-2013 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -7645,10 +8283,6 @@ Signed-off-by: Biwen Li +/* Size in bytes of the FQ taildrop threshold */ +#define DPA_FQ_TD 0x200000 + -+#ifdef CONFIG_PTP_1588_CLOCK_DPAA -+struct ptp_priv_s ptp_priv; -+#endif -+ +static struct dpa_bp *dpa_bp_array[64]; + +int dpa_max_frm; @@ -7900,7 +8534,7 @@ Signed-off-by: Biwen Li +u64 dpa_get_timestamp_ns(const struct dpa_priv_s *priv, enum port_type rx_tx, + const void *data) +{ -+ u64 *ts, ns; ++ u64 *ts; + + ts = fm_port_get_buffer_time_stamp(priv->mac_dev->port_dev[rx_tx], + data); @@ -7910,10 +8544,7 @@ Signed-off-by: Biwen Li + + be64_to_cpus(ts); + -+ /* multiple DPA_PTP_NOMINAL_FREQ_PERIOD_NS for case of non power of 2 */ -+ ns = *ts << DPA_PTP_NOMINAL_FREQ_PERIOD_SHIFT; -+ -+ return ns; ++ return *ts; +} + +int dpa_get_ts(const struct dpa_priv_s *priv, enum port_type rx_tx, @@ -7937,8 +8568,6 @@ Signed-off-by: Biwen Li + struct dpa_priv_s *priv = netdev_priv(dev); + struct mac_device *mac_dev = priv->mac_dev; + -+ if (mac_dev->fm_rtc_enable) -+ mac_dev->fm_rtc_enable(get_fm_handle(dev)); + if (mac_dev->ptp_enable) + mac_dev->ptp_enable(mac_dev->get_mac_handle(mac_dev)); + @@ -7970,8 +8599,6 @@ Signed-off-by: Biwen Li + struct dpa_priv_s *priv = netdev_priv(dev); + struct mac_device *mac_dev = priv->mac_dev; + -+ if (mac_dev->fm_rtc_enable) -+ mac_dev->fm_rtc_enable(get_fm_handle(dev)); + if (mac_dev->ptp_enable) + mac_dev->ptp_enable(mac_dev->get_mac_handle(mac_dev)); + @@ -8169,23 +8796,6 @@ Signed-off-by: Biwen Li + } +#endif + -+#ifdef CONFIG_PTP_1588_CLOCK_DPAA -+ if ((mac_dev->phy_if != PHY_INTERFACE_MODE_SGMII) || -+ ((mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII) && -+ (mac_dev->speed == SPEED_1000))) { -+ ptp_priv.node = of_parse_phandle(mac_node, "ptp-timer", 0); -+ if (ptp_priv.node) { -+ ptp_priv.of_dev = of_find_device_by_node(ptp_priv.node); -+ if (unlikely(ptp_priv.of_dev == NULL)) { -+ dev_err(dpa_dev, -+ "Cannot find device represented by timer_node\n"); -+ of_node_put(ptp_priv.node); -+ return ERR_PTR(-EINVAL); -+ } -+ ptp_priv.mac_dev = mac_dev; -+ } -+ } -+#endif + return mac_dev; +} +EXPORT_SYMBOL(dpa_mac_probe); @@ -8431,13 +9041,12 @@ Signed-off-by: Biwen Li + return false; +} + -+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE ++#ifdef CONFIG_FMAN_PFC +u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb, + void *accel_priv, select_queue_fallback_t fallback) +{ + return dpa_get_queue_mapping(skb); +} -+EXPORT_SYMBOL(dpa_select_queue); +#endif + +struct dpa_fq *dpa_fq_alloc(struct device *dev, @@ -8855,8 +9464,6 @@ Signed-off-by: Biwen Li + memset(&initfq, 0, sizeof(initfq)); + + initfq.we_mask = QM_INITFQ_WE_FQCTRL; -+ /* FIXME: why would we want to keep an empty FQ in cache? */ -+ initfq.fqd.fq_ctrl = QM_FQCTRL_PREFERINCACHE; + + /* Try to reduce the number of portal interrupts for + * Tx Confirmation FQs. @@ -9541,7 +10148,7 @@ Signed-off-by: Biwen Li +void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp); +bool dpa_bpid2pool_use(int bpid); +void dpa_bp_drain(struct dpa_bp *bp); -+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE ++#ifdef CONFIG_FMAN_PFC +u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb, + void *accel_priv, select_queue_fallback_t fallback); +#endif @@ -9979,7 +10586,7 @@ Signed-off-by: Biwen Li +module_exit(dpa_proxy_unload); --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c -@@ -0,0 +1,1201 @@ +@@ -0,0 +1,1195 @@ +/* Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -10557,6 +11164,8 @@ Signed-off-by: Biwen Li + return 0; /* loop disabled by default */ + + skb_push(skb, ETH_HLEN); /* compensate for eth_type_trans */ ++ /* Save the current CPU ID in order to maintain core affinity */ ++ skb_set_queue_mapping(skb, raw_smp_processor_id()); + dpa_tx(skb, dpa_loop_netdevs[priv->loop_to]); + + return 1; /* Frame Tx on the selected interface */ @@ -10630,6 +11239,8 @@ Signed-off-by: Biwen Li + } +#endif + ++ skb_record_rx_queue(skb, raw_smp_processor_id()); ++ + if (use_gro) { + gro_result_t gro_result; + const struct qman_portal_config *pc = @@ -10750,18 +11361,19 @@ Signed-off-by: Biwen Li + +#ifndef CONFIG_PPC +/* Verify the conditions that trigger the A010022 errata: data unaligned to -+ * 16 bytes and 4K memory address crossings. ++ * 16 bytes, 4K memory address crossings and S/G fragments. + */ +static bool a010022_check_skb(struct sk_buff *skb, struct dpa_priv_s *priv) +{ -+ int nr_frags, i = 0; -+ skb_frag_t *frag; -+ + /* Check if the headroom is aligned */ + if (((uintptr_t)skb->data - priv->tx_headroom) % + priv->buf_layout[TX].data_align != 0) + return true; + ++ /* Check for paged data in the skb. We do not support S/G fragments */ ++ if (skb_is_nonlinear(skb)) ++ return true; ++ + /* Check if the headroom crosses a boundary */ + if (HAS_DMA_ISSUE(skb->head, skb_headroom(skb))) + return true; @@ -10774,20 +11386,6 @@ Signed-off-by: Biwen Li + if (HAS_DMA_ISSUE(skb->head, skb_end_offset(skb))) + return true; + -+ nr_frags = skb_shinfo(skb)->nr_frags; -+ -+ while (i < nr_frags) { -+ frag = &skb_shinfo(skb)->frags[i]; -+ -+ /* Check if a paged fragment crosses a boundary from its -+ * offset to its end. -+ */ -+ if (HAS_DMA_ISSUE(frag->page_offset, frag->size)) -+ return true; -+ -+ i++; -+ } -+ + return false; +} + @@ -11015,7 +11613,7 @@ Signed-off-by: Biwen Li +int __hot dpa_tx(struct sk_buff *skb, struct net_device *net_dev) +{ + struct dpa_priv_s *priv; -+ const int queue_mapping = dpa_get_queue_mapping(skb); ++ int queue_mapping = dpa_get_queue_mapping(skb); + struct qman_fq *egress_fq, *conf_fq; + +#ifdef CONFIG_FSL_DPAA_HOOKS @@ -11033,6 +11631,9 @@ Signed-off-by: Biwen Li + return ceetm_tx(skb, net_dev); +#endif + ++ if (unlikely(queue_mapping >= DPAA_ETH_TX_QUEUES)) ++ queue_mapping = queue_mapping % DPAA_ETH_TX_QUEUES; ++ + egress_fq = priv->egress_fqs[queue_mapping]; + conf_fq = priv->conf_fqs[queue_mapping]; + @@ -11611,7 +12212,7 @@ Signed-off-by: Biwen Li +#include --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ethtool.c -@@ -0,0 +1,542 @@ +@@ -0,0 +1,587 @@ +/* Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -11653,6 +12254,9 @@ Signed-off-by: Biwen Li +#endif + +#include ++#include ++#include ++#include + +#include "dpaa_eth.h" +#include "mac.h" /* struct mac_device */ @@ -12133,6 +12737,47 @@ Signed-off-by: Biwen Li + memcpy(strings, dpa_stats_global, size); +} + ++static int dpaa_get_ts_info(struct net_device *net_dev, ++ struct ethtool_ts_info *info) ++{ ++ struct dpa_priv_s *priv = netdev_priv(net_dev); ++ struct device *dev = priv->mac_dev->dev; ++ struct device_node *mac_node = dev->of_node; ++ struct device_node *fman_node = NULL, *ptp_node = NULL; ++ struct platform_device *ptp_dev = NULL; ++ struct qoriq_ptp *ptp = NULL; ++ ++ info->phc_index = -1; ++ ++ fman_node = of_get_parent(mac_node); ++ if (fman_node) ++ ptp_node = of_parse_phandle(fman_node, "ptimer-handle", 0); ++ ++ if (ptp_node) ++ ptp_dev = of_find_device_by_node(ptp_node); ++ ++ if (ptp_dev) ++ ptp = platform_get_drvdata(ptp_dev); ++ ++ if (ptp) ++ info->phc_index = ptp->phc_index; ++ ++#ifdef CONFIG_FSL_DPAA_TS ++ info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE | ++ SOF_TIMESTAMPING_RX_HARDWARE | ++ SOF_TIMESTAMPING_RAW_HARDWARE; ++ info->tx_types = (1 << HWTSTAMP_TX_OFF) | ++ (1 << HWTSTAMP_TX_ON); ++ info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | ++ (1 << HWTSTAMP_FILTER_ALL); ++#else ++ info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE | ++ SOF_TIMESTAMPING_SOFTWARE; ++#endif ++ ++ return 0; ++} ++ +const struct ethtool_ops dpa_ethtool_ops = { + .get_link_ksettings = dpa_get_ksettings, + .set_link_ksettings = dpa_set_ksettings, @@ -12153,302 +12798,9 @@ Signed-off-by: Biwen Li + .get_wol = dpa_get_wol, + .set_wol = dpa_set_wol, +#endif ++ .get_ts_info = dpaa_get_ts_info, +}; --- /dev/null -+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_ptp.c -@@ -0,0 +1,291 @@ -+/* -+ * DPAA Ethernet Driver -- PTP 1588 clock using the dTSEC -+ * -+ * Author: Yangbo Lu -+ * -+ * Copyright 2014 Freescale Semiconductor, Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "dpaa_eth.h" -+#include "mac.h" -+ -+static struct mac_device *mac_dev; -+static u32 freqCompensation; -+ -+/* Bit definitions for the TMR_CTRL register */ -+#define ALM1P (1<<31) /* Alarm1 output polarity */ -+#define ALM2P (1<<30) /* Alarm2 output polarity */ -+#define FS (1<<28) /* FIPER start indication */ -+#define PP1L (1<<27) /* Fiper1 pulse loopback mode enabled. */ -+#define PP2L (1<<26) /* Fiper2 pulse loopback mode enabled. */ -+#define TCLK_PERIOD_SHIFT (16) /* 1588 timer reference clock period. */ -+#define TCLK_PERIOD_MASK (0x3ff) -+#define RTPE (1<<15) /* Record Tx Timestamp to PAL Enable. */ -+#define FRD (1<<14) /* FIPER Realignment Disable */ -+#define ESFDP (1<<11) /* External Tx/Rx SFD Polarity. */ -+#define ESFDE (1<<10) /* External Tx/Rx SFD Enable. */ -+#define ETEP2 (1<<9) /* External trigger 2 edge polarity */ -+#define ETEP1 (1<<8) /* External trigger 1 edge polarity */ -+#define COPH (1<<7) /* Generated clock output phase. */ -+#define CIPH (1<<6) /* External oscillator input clock phase */ -+#define TMSR (1<<5) /* Timer soft reset. */ -+#define BYP (1<<3) /* Bypass drift compensated clock */ -+#define TE (1<<2) /* 1588 timer enable. */ -+#define CKSEL_SHIFT (0) /* 1588 Timer reference clock source */ -+#define CKSEL_MASK (0x3) -+ -+/* Bit definitions for the TMR_TEVENT register */ -+#define ETS2 (1<<25) /* External trigger 2 timestamp sampled */ -+#define ETS1 (1<<24) /* External trigger 1 timestamp sampled */ -+#define ALM2 (1<<17) /* Current time = alarm time register 2 */ -+#define ALM1 (1<<16) /* Current time = alarm time register 1 */ -+#define PP1 (1<<7) /* periodic pulse generated on FIPER1 */ -+#define PP2 (1<<6) /* periodic pulse generated on FIPER2 */ -+#define PP3 (1<<5) /* periodic pulse generated on FIPER3 */ -+ -+/* Bit definitions for the TMR_TEMASK register */ -+#define ETS2EN (1<<25) /* External trigger 2 timestamp enable */ -+#define ETS1EN (1<<24) /* External trigger 1 timestamp enable */ -+#define ALM2EN (1<<17) /* Timer ALM2 event enable */ -+#define ALM1EN (1<<16) /* Timer ALM1 event enable */ -+#define PP1EN (1<<7) /* Periodic pulse event 1 enable */ -+#define PP2EN (1<<6) /* Periodic pulse event 2 enable */ -+ -+/* Bit definitions for the TMR_PEVENT register */ -+#define TXP2 (1<<9) /* PTP transmitted timestamp im TXTS2 */ -+#define TXP1 (1<<8) /* PTP transmitted timestamp in TXTS1 */ -+#define RXP (1<<0) /* PTP frame has been received */ -+ -+/* Bit definitions for the TMR_PEMASK register */ -+#define TXP2EN (1<<9) /* Transmit PTP packet event 2 enable */ -+#define TXP1EN (1<<8) /* Transmit PTP packet event 1 enable */ -+#define RXPEN (1<<0) /* Receive PTP packet event enable */ -+ -+/* Bit definitions for the TMR_STAT register */ -+#define STAT_VEC_SHIFT (0) /* Timer general purpose status vector */ -+#define STAT_VEC_MASK (0x3f) -+ -+/* Bit definitions for the TMR_PRSC register */ -+#define PRSC_OCK_SHIFT (0) /* Output clock division/prescale factor. */ -+#define PRSC_OCK_MASK (0xffff) -+ -+ -+#define N_EXT_TS 2 -+ -+static void set_alarm(void) -+{ -+ u64 ns; -+ -+ if (mac_dev->fm_rtc_get_cnt) -+ mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &ns); -+ ns += 1500000000ULL; -+ ns = div_u64(ns, 1000000000UL) * 1000000000ULL; -+ ns -= DPA_PTP_NOMINAL_FREQ_PERIOD_NS; -+ if (mac_dev->fm_rtc_set_alarm) -+ mac_dev->fm_rtc_set_alarm(mac_dev->fm_dev, 0, ns); -+} -+ -+static void set_fipers(void) -+{ -+ u64 fiper; -+ -+ if (mac_dev->fm_rtc_disable) -+ mac_dev->fm_rtc_disable(mac_dev->fm_dev); -+ -+ set_alarm(); -+ fiper = 1000000000ULL - DPA_PTP_NOMINAL_FREQ_PERIOD_NS; -+ if (mac_dev->fm_rtc_set_fiper) -+ mac_dev->fm_rtc_set_fiper(mac_dev->fm_dev, 0, fiper); -+ -+ if (mac_dev->fm_rtc_enable) -+ mac_dev->fm_rtc_enable(mac_dev->fm_dev); -+} -+ -+/* PTP clock operations */ -+ -+static int ptp_dpa_adjfreq(struct ptp_clock_info *ptp, s32 ppb) -+{ -+ u64 adj; -+ u32 diff, tmr_add; -+ int neg_adj = 0; -+ -+ if (ppb < 0) { -+ neg_adj = 1; -+ ppb = -ppb; -+ } -+ -+ tmr_add = freqCompensation; -+ adj = tmr_add; -+ adj *= ppb; -+ diff = div_u64(adj, 1000000000ULL); -+ -+ tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff; -+ -+ if (mac_dev->fm_rtc_set_drift) -+ mac_dev->fm_rtc_set_drift(mac_dev->fm_dev, tmr_add); -+ -+ return 0; -+} -+ -+static int ptp_dpa_adjtime(struct ptp_clock_info *ptp, s64 delta) -+{ -+ s64 now; -+ -+ if (mac_dev->fm_rtc_get_cnt) -+ mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &now); -+ -+ now += delta; -+ -+ if (mac_dev->fm_rtc_set_cnt) -+ mac_dev->fm_rtc_set_cnt(mac_dev->fm_dev, now); -+ set_fipers(); -+ -+ return 0; -+} -+ -+static int ptp_dpa_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) -+{ -+ u64 ns; -+ u32 remainder; -+ -+ if (mac_dev->fm_rtc_get_cnt) -+ mac_dev->fm_rtc_get_cnt(mac_dev->fm_dev, &ns); -+ -+ ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder); -+ ts->tv_nsec = remainder; -+ return 0; -+} -+ -+static int ptp_dpa_settime(struct ptp_clock_info *ptp, -+ const struct timespec64 *ts) -+{ -+ u64 ns; -+ -+ ns = ts->tv_sec * 1000000000ULL; -+ ns += ts->tv_nsec; -+ -+ if (mac_dev->fm_rtc_set_cnt) -+ mac_dev->fm_rtc_set_cnt(mac_dev->fm_dev, ns); -+ set_fipers(); -+ return 0; -+} -+ -+static int ptp_dpa_enable(struct ptp_clock_info *ptp, -+ struct ptp_clock_request *rq, int on) -+{ -+ u32 bit; -+ -+ switch (rq->type) { -+ case PTP_CLK_REQ_EXTTS: -+ switch (rq->extts.index) { -+ case 0: -+ bit = ETS1EN; -+ break; -+ case 1: -+ bit = ETS2EN; -+ break; -+ default: -+ return -EINVAL; -+ } -+ if (on) { -+ if (mac_dev->fm_rtc_enable_interrupt) -+ mac_dev->fm_rtc_enable_interrupt( -+ mac_dev->fm_dev, bit); -+ } else { -+ if (mac_dev->fm_rtc_disable_interrupt) -+ mac_dev->fm_rtc_disable_interrupt( -+ mac_dev->fm_dev, bit); -+ } -+ return 0; -+ -+ case PTP_CLK_REQ_PPS: -+ if (on) { -+ if (mac_dev->fm_rtc_enable_interrupt) -+ mac_dev->fm_rtc_enable_interrupt( -+ mac_dev->fm_dev, PP1EN); -+ } else { -+ if (mac_dev->fm_rtc_disable_interrupt) -+ mac_dev->fm_rtc_disable_interrupt( -+ mac_dev->fm_dev, PP1EN); -+ } -+ return 0; -+ -+ default: -+ break; -+ } -+ -+ return -EOPNOTSUPP; -+} -+ -+static struct ptp_clock_info ptp_dpa_caps = { -+ .owner = THIS_MODULE, -+ .name = "dpaa clock", -+ .max_adj = 512000, -+ .n_alarm = 0, -+ .n_ext_ts = N_EXT_TS, -+ .n_per_out = 0, -+ .pps = 1, -+ .adjfreq = ptp_dpa_adjfreq, -+ .adjtime = ptp_dpa_adjtime, -+ .gettime64 = ptp_dpa_gettime, -+ .settime64 = ptp_dpa_settime, -+ .enable = ptp_dpa_enable, -+}; -+ -+static int __init __cold dpa_ptp_load(void) -+{ -+ struct device *ptp_dev; -+ struct timespec64 now; -+ struct ptp_clock *clock = ptp_priv.clock; -+ int dpa_phc_index; -+ int err; -+ -+ if (!(ptp_priv.of_dev && ptp_priv.mac_dev)) -+ return -ENODEV; -+ -+ ptp_dev = &ptp_priv.of_dev->dev; -+ mac_dev = ptp_priv.mac_dev; -+ -+ if (mac_dev->fm_rtc_get_drift) -+ mac_dev->fm_rtc_get_drift(mac_dev->fm_dev, &freqCompensation); -+ -+ getnstimeofday64(&now); -+ ptp_dpa_settime(&ptp_dpa_caps, &now); -+ -+ clock = ptp_clock_register(&ptp_dpa_caps, ptp_dev); -+ if (IS_ERR(clock)) { -+ err = PTR_ERR(clock); -+ return err; -+ } -+ dpa_phc_index = ptp_clock_index(clock); -+ return 0; -+} -+module_init(dpa_ptp_load); -+ -+static void __exit __cold dpa_ptp_unload(void) -+{ -+ struct ptp_clock *clock = ptp_priv.clock; -+ -+ if (mac_dev->fm_rtc_disable_interrupt) -+ mac_dev->fm_rtc_disable_interrupt(mac_dev->fm_dev, 0xffffffff); -+ ptp_clock_unregister(clock); -+} -+module_exit(dpa_ptp_unload); ---- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c @@ -0,0 +1,931 @@ +/* Copyright 2008-2012 Freescale Semiconductor, Inc. @@ -13384,7 +13736,7 @@ Signed-off-by: Biwen Li +}; --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c -@@ -0,0 +1,489 @@ +@@ -0,0 +1,490 @@ +/* Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -13773,6 +14125,7 @@ Signed-off-by: Biwen Li + mac_dev->fixed_link->duplex = phy->duplex; + mac_dev->fixed_link->pause = phy->pause; + mac_dev->fixed_link->asym_pause = phy->asym_pause; ++ printk(KERN_INFO "Setting up fixed link, speed %d duplex %d\n", mac_dev->fixed_link->speed, mac_dev->fixed_link->duplex); + } + + _errno = mac_dev->init(mac_dev); @@ -13876,7 +14229,7 @@ Signed-off-by: Biwen Li +module_exit(mac_unload); --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.h -@@ -0,0 +1,135 @@ +@@ -0,0 +1,134 @@ +/* Copyright 2008-2011 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -13976,10 +14329,9 @@ Signed-off-by: Biwen Li + int (*fm_rtc_set_alarm)(struct fm *fm_dev, uint32_t id, uint64_t time); + int (*fm_rtc_set_fiper)(struct fm *fm_dev, uint32_t id, + uint64_t fiper); -+#ifdef CONFIG_PTP_1588_CLOCK_DPAA + int (*fm_rtc_enable_interrupt)(struct fm *fm_dev, uint32_t events); + int (*fm_rtc_disable_interrupt)(struct fm *fm_dev, uint32_t events); -+#endif ++ + int (*set_wol)(struct fm_port *port, struct fm_mac_dev *fm_mac_dev, + bool en); + int (*dump_mac_regs)(struct mac_device *h_mac, char *buf, int nn); @@ -21479,7 +21831,7 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c -@@ -0,0 +1,1153 @@ +@@ -0,0 +1,1166 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor Inc. + * @@ -21518,6 +21870,8 @@ Signed-off-by: Biwen Li + + @Description FM mEMAC driver +*//***************************************************************************/ ++#include <../../../../sdk_dpaa/mac.h> ++#include + +#include "std_ext.h" +#include "string_ext.h" @@ -21530,6 +21884,8 @@ Signed-off-by: Biwen Li +#include "memac.h" + + ++static t_Error MemacAdjustLink(t_Handle h_Memac, e_EnetSpeed speed, bool fullDuplex); ++ +/*****************************************************************************/ +/* Internal routines */ +/*****************************************************************************/ @@ -21758,11 +22114,20 @@ Signed-off-by: Biwen Li +{ + t_Memac *p_Memac = (t_Memac *)h_Memac; + ++ struct mac_device *mac_dev = (struct mac_device *)p_Memac->h_App; ++ + SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE); + SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE); + + fman_memac_enable(p_Memac->p_MemMap, (mode & e_COMM_MODE_RX), (mode & e_COMM_MODE_TX)); + ++ if (ENET_INTERFACE_FROM_MODE(p_Memac->enetMode) == e_ENET_IF_RGMII) { ++ if (mac_dev->fixed_link) { ++ printk(KERN_INFO "This is a fixed-link, forcing speed %d duplex %d\n",mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex); ++ MemacAdjustLink(h_Memac,mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex); ++ } ++ } ++ + return E_OK; +} + @@ -53194,7 +53559,7 @@ Signed-off-by: Biwen Li +fsl-ncsw-Pcd-objs := fm_port.o fm_port_im.o fman_port.o --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/Port/fm_port.c -@@ -0,0 +1,6436 @@ +@@ -0,0 +1,6437 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor Inc. + * @@ -53778,7 +54143,8 @@ Signed-off-by: Biwen Li + p_FmPort->rxPoolsParams.numOfPools = p_ExtBufPools->numOfPoolsUsed; + p_FmPort->rxPoolsParams.largestBufSize = + sizesArray[orderedArray[p_ExtBufPools->numOfPoolsUsed - 1]]; -+ p_FmPort->rxPoolsParams.secondLargestBufSize = ++ if (p_ExtBufPools->numOfPoolsUsed > 1) ++ p_FmPort->rxPoolsParams.secondLargestBufSize = + sizesArray[orderedArray[p_ExtBufPools->numOfPoolsUsed - 2]]; + + /* FMBM_RMPD reg. - pool depletion */ @@ -108201,7 +108567,7 @@ Signed-off-by: Biwen Li +module_exit(fmt_unload); --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_fman/src/wrapper/lnxwrp_fm.c -@@ -0,0 +1,2908 @@ +@@ -0,0 +1,2910 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor Inc. + * @@ -108455,7 +108821,7 @@ Signed-off-by: Biwen Li +#ifdef CONFIG_PM_SLEEP + if (fman_get_normal_pending(p_Fm->p_FmFpmRegs) & INTR_EN_WAKEUP) + { -+ pm_wakeup_event(p_LnxWrpFmDev->dev, 200); ++ pm_wakeup_event(p_LnxWrpFmDev->dev, 200); + } +#endif + FM_EventIsr(p_LnxWrpFmDev->h_Dev); @@ -108886,6 +109252,7 @@ Signed-off-by: Biwen Li + } + } + ++#if 0 + /* Get the RTC base address and size */ + memset(ids, 0, sizeof(ids)); + if (WARN_ON(strlen("ptp-timer") >= sizeof(ids[0].name))) @@ -108908,6 +109275,7 @@ Signed-off-by: Biwen Li + p_LnxWrpFmDev->fmRtcMemSize = res.end + 1 - res.start; + } + } ++#endif + +#if (DPAA_VERSION >= 11) + /* Get the VSP base address */ @@ -109081,7 +109449,7 @@ Signed-off-by: Biwen Li + if (unlikely(_errno < 0)) + RETURN_ERROR(MAJOR, E_INVALID_STATE, ("can_request_irq() = %d", _errno)); +#endif -+ _errno = devm_request_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->irq, fm_irq, 0, "fman", p_LnxWrpFmDev); ++ _errno = devm_request_irq(p_LnxWrpFmDev->dev, p_LnxWrpFmDev->irq, fm_irq, IRQF_SHARED, "fman", p_LnxWrpFmDev); + if (unlikely(_errno < 0)) + RETURN_ERROR(MAJOR, E_INVALID_STATE, ("request_irq(%d) = %d", p_LnxWrpFmDev->irq, _errno)); + @@ -109311,7 +109679,7 @@ Signed-off-by: Biwen Li + p_LnxWrpFmDev->fmDevSettings.param.fmMacClkRatio = + !!(get_rcwsr(4) & 0x1); /* RCW[FM_MAC_RAT1] */ + -+ { ++ { + /* T4 Devices ClkRatio is always 1 regardless of RCW[FM_MAC_RAT1] */ + uint32_t svr; + svr = mfspr(SPRN_SVR); @@ -109524,7 +109892,7 @@ Signed-off-by: Biwen Li +MODULE_DEVICE_TABLE(of, fm_match); +#endif /* !MODULE */ + -+#ifdef CONFIG_PM ++#if defined CONFIG_PM && (defined CONFIG_PPC || defined CONFIG_PPC64) + +#define SCFG_FMCLKDPSLPCR_ADDR 0xFFE0FC00C +#define SCFG_FMCLKDPSLPCR_DS_VAL 0x48402000 @@ -109577,11 +109945,11 @@ Signed-off-by: Biwen Li + +#define FM_PM_OPS (&fm_pm_ops) + -+#else /* CONFIG_PM */ ++#else /* CONFIG_PM && (CONFIG_PPC || CONFIG_PPC64) */ + +#define FM_PM_OPS NULL + -+#endif /* CONFIG_PM */ ++#endif /* CONFIG_PM && (CONFIG_PPC || CONFIG_PPC64) */ + +static struct platform_driver fm_driver = { + .driver = { @@ -137243,7 +137611,7 @@ Signed-off-by: Biwen Li +#endif --- /dev/null +++ b/drivers/staging/fsl_qbman/qman_high.c -@@ -0,0 +1,5652 @@ +@@ -0,0 +1,5655 @@ +/* Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -137821,6 +138189,7 @@ Signed-off-by: Biwen Li + char buf[16]; + int ret; + u32 isdr; ++ struct platform_device_info pdev_info; + + if (!portal) { + portal = kmalloc(sizeof(*portal), GFP_KERNEL); @@ -137917,27 +138286,22 @@ Signed-off-by: Biwen Li + portal->dqrr_disable_ref = 0; + portal->cb_dc_ern = NULL; + sprintf(buf, "qportal-%d", config->public_cfg.channel); -+ portal->pdev = platform_device_alloc(buf, -1); ++ ++ memset(&pdev_info, 0, sizeof(pdev_info)); ++ pdev_info.name = buf; ++ pdev_info.id = PLATFORM_DEVID_NONE; ++ pdev_info.dma_mask = DMA_BIT_MASK(40); ++ ++ portal->pdev = platform_device_register_full(&pdev_info); + if (!portal->pdev) { + pr_err("qman_portal - platform_device_alloc() failed\n"); -+ goto fail_devalloc; -+ } -+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) -+ portal->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(40); -+ portal->pdev->dev.dma_mask = &portal->pdev->dev.coherent_dma_mask; -+#else -+ if (dma_set_mask(&portal->pdev->dev, DMA_BIT_MASK(40))) { -+ pr_err("qman_portal - dma_set_mask() failed\n"); -+ goto fail_devadd; ++ goto fail_devregister; + } -+#endif ++ ++ arch_setup_dma_ops(&portal->pdev->dev, 0, 0, NULL, true); ++ + portal->pdev->dev.pm_domain = &qman_portal_device_pm_domain; + portal->pdev->dev.platform_data = portal; -+ ret = platform_device_add(portal->pdev); -+ if (ret) { -+ pr_err("qman_portal - platform_device_add() failed\n"); -+ goto fail_devadd; -+ } + dpa_rbtree_init(&portal->retire_table); + isdr = 0xffffffff; + qm_isr_disable_write(__p, isdr); @@ -137997,10 +138361,8 @@ Signed-off-by: Biwen Li +fail_affinity: + free_irq(config->public_cfg.irq, portal); +fail_irq: -+ platform_device_del(portal->pdev); -+fail_devadd: -+ platform_device_put(portal->pdev); -+fail_devalloc: ++ platform_device_unregister(portal->pdev); ++fail_devregister: + if (num_ceetms) + for (ret = 0; ret < num_ceetms; ret++) + kfree(portal->ccgrs[ret]); @@ -138098,8 +138460,7 @@ Signed-off-by: Biwen Li + qm_dqrr_finish(&qm->p); + qm_eqcr_finish(&qm->p); + -+ platform_device_del(qm->pdev); -+ platform_device_put(qm->pdev); ++ platform_device_unregister(qm->pdev); + + qm->config = NULL; + if (qm->alloced) @@ -139055,6 +139416,16 @@ Signed-off-by: Biwen Li + } else { + phys_fq = dma_map_single(&p->pdev->dev, fq, sizeof(*fq), + DMA_TO_DEVICE); ++ if (dma_mapping_error(&p->pdev->dev, phys_fq)) { ++ dev_err(&p->pdev->dev, ++ "dma_map_single failed for fqid: %u\n", ++ fq->fqid); ++ FQUNLOCK(fq); ++ PORTAL_IRQ_UNLOCK(p, irqflags); ++ put_affine_portal(); ++ return -EIO; ++ } ++ + qm_fqd_stashing_set64(&mcc->initfq.fqd, phys_fq); + } + } @@ -146346,7 +146717,7 @@ Signed-off-by: Biwen Li +#endif /* FSL_BMAN_H */ --- /dev/null +++ b/include/linux/fsl_qman.h -@@ -0,0 +1,3900 @@ +@@ -0,0 +1,3910 @@ +/* Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -150242,6 +150613,16 @@ Signed-off-by: Biwen Li +int qman_p_enqueue_precommit(struct qman_portal *p, struct qman_fq *fq, + const struct qm_fd *fd, u32 flags, + qman_cb_precommit cb, void *cb_arg); ++ ++static inline int qman_is_probed(void) { ++ return 1; ++} ++ ++ ++static inline int qman_portals_probed(void) { ++ return 1; ++} ++ +#ifdef __cplusplus +} +#endif diff --git a/target/linux/layerscape/patches-4.14/708-mc-bus-support-layerscape.patch b/target/linux/layerscape/patches-4.14/708-mc-bus-support-layerscape.patch index 8d2ba1a193..129b8ecc64 100644 --- a/target/linux/layerscape/patches-4.14/708-mc-bus-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/708-mc-bus-support-layerscape.patch @@ -1,10 +1,15 @@ -From 2aaf8e8caef3ec4c2c155421f62f983892c49387 Mon Sep 17 00:00:00 2001 +From ab58c737bc723f52e787e1767bbbf0fcbe39a27b Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Fri, 16 Nov 2018 12:20:04 +0800 -Subject: [PATCH 13/39] mc-bus: support layerscape +Date: Wed, 17 Apr 2019 18:58:43 +0800 +Subject: [PATCH] mc-bus: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + This is an integrated patch of mc-bus for layerscape Signed-off-by: Bharat Bhushan +Signed-off-by: Biwen Li Signed-off-by: Bogdan Purcareata Signed-off-by: Cristian Sovaiala Signed-off-by: Greg Kroah-Hartman @@ -18,9 +23,8 @@ Signed-off-by: Lijun Pan Signed-off-by: Nipun Gupta Signed-off-by: Radu Alexe Signed-off-by: Razvan Stefanescu +Signed-off-by: Roy Pledge Signed-off-by: Stuart Yoder -Signed-off-by: Stuart Yoder -Signed-off-by: Biwen Li --- drivers/bus/Kconfig | 2 + drivers/bus/Makefile | 4 + @@ -30,23 +34,21 @@ Signed-off-by: Biwen Li .../fsl-mc/bus => bus/fsl-mc}/dpcon.c | 103 +- drivers/bus/fsl-mc/dpmcp.c | 99 ++ .../fsl-mc/bus => bus/fsl-mc}/dprc-driver.c | 96 +- - .../{staging/fsl-mc/bus => bus/fsl-mc}/dprc.c | 288 +---- - .../bus => bus/fsl-mc}/fsl-mc-allocator.c | 112 +- - .../fsl-mc/bus => bus/fsl-mc}/fsl-mc-bus.c | 305 ++++- + .../{staging/fsl-mc/bus => bus/fsl-mc}/dprc.c | 289 +---- + .../bus => bus/fsl-mc}/fsl-mc-allocator.c | 123 +- + .../fsl-mc/bus => bus/fsl-mc}/fsl-mc-bus.c | 322 +++++- .../fsl-mc/bus => bus/fsl-mc}/fsl-mc-msi.c | 16 +- drivers/bus/fsl-mc/fsl-mc-private.h | 223 ++++ drivers/bus/fsl-mc/fsl-mc-restool.c | 219 ++++ - .../fsl-mc/bus => bus/fsl-mc}/mc-io.c | 36 +- + .../fsl-mc/bus => bus/fsl-mc}/mc-io.c | 51 +- .../fsl-mc/bus => bus/fsl-mc}/mc-sys.c | 33 +- drivers/irqchip/Kconfig | 6 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c | 98 ++ - drivers/staging/fsl-dpaa2/ethernet/README | 2 +- .../staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 2 +- .../staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 3 +- drivers/staging/fsl-dpaa2/ethernet/dpni.c | 2 +- - drivers/staging/fsl-mc/TODO | 18 - - drivers/staging/fsl-mc/bus/Kconfig | 16 +- + drivers/staging/fsl-mc/bus/Kconfig | 15 +- drivers/staging/fsl-mc/bus/Makefile | 13 - drivers/staging/fsl-mc/bus/dpio/dpio-driver.c | 2 +- .../staging/fsl-mc/bus/dpio/dpio-service.c | 2 +- @@ -57,9 +59,9 @@ Signed-off-by: Biwen Li drivers/staging/fsl-mc/bus/dprc-cmd.h | 451 -------- drivers/staging/fsl-mc/bus/dprc.h | 268 ----- .../fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c | 1 + - include/linux/fsl/mc.h | 1020 +++++++++++++++++ + include/linux/fsl/mc.h | 1029 +++++++++++++++++ include/uapi/linux/fsl_mc.h | 31 + - 37 files changed, 2255 insertions(+), 1546 deletions(-) + 35 files changed, 2302 insertions(+), 1531 deletions(-) create mode 100644 drivers/bus/fsl-mc/Kconfig create mode 100644 drivers/bus/fsl-mc/Makefile rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/dpbp.c (67%) @@ -68,14 +70,13 @@ Signed-off-by: Biwen Li rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/dprc-driver.c (93%) rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/dprc.c (68%) rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/fsl-mc-allocator.c (84%) - rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/fsl-mc-bus.c (76%) + rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/fsl-mc-bus.c (75%) rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/fsl-mc-msi.c (96%) create mode 100644 drivers/bus/fsl-mc/fsl-mc-private.h create mode 100644 drivers/bus/fsl-mc/fsl-mc-restool.c rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/mc-io.c (89%) rename drivers/{staging/fsl-mc/bus => bus/fsl-mc}/mc-sys.c (90%) create mode 100644 drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c - delete mode 100644 drivers/staging/fsl-mc/TODO delete mode 100644 drivers/staging/fsl-mc/bus/dpmcp-cmd.h delete mode 100644 drivers/staging/fsl-mc/bus/dpmcp.h delete mode 100644 drivers/staging/fsl-mc/bus/dpmng-cmd.h @@ -3618,7 +3619,7 @@ Signed-off-by: Biwen Li -} --- /dev/null +++ b/drivers/bus/fsl-mc/dprc.c -@@ -0,0 +1,575 @@ +@@ -0,0 +1,576 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright 2013-2016 Freescale Semiconductor Inc. @@ -4123,10 +4124,11 @@ Signed-off-by: Biwen Li + + /* retrieve response parameters */ + rsp_params = (struct dprc_rsp_get_obj_region *)cmd.params; -+ region_desc->base_offset = le32_to_cpu(rsp_params->base_addr); ++ region_desc->base_offset = le32_to_cpu(rsp_params->base_offset); + region_desc->size = le32_to_cpu(rsp_params->size); + region_desc->type = rsp_params->type; + region_desc->flags = le32_to_cpu(rsp_params->flags); ++ region_desc->base_address = le64_to_cpu(rsp_params->base_addr); + + return 0; +} @@ -4862,7 +4864,7 @@ Signed-off-by: Biwen Li -} --- /dev/null +++ b/drivers/bus/fsl-mc/fsl-mc-allocator.c -@@ -0,0 +1,655 @@ +@@ -0,0 +1,666 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * fsl-mc object allocator driver @@ -5160,6 +5162,14 @@ Signed-off-by: Biwen Li + if (!mc_adev) + goto error; + ++ mc_adev->consumer_link = device_link_add(&mc_dev->dev, ++ &mc_adev->dev, ++ DL_FLAG_AUTOREMOVE_CONSUMER); ++ if (!mc_adev->consumer_link) { ++ error = -EINVAL; ++ goto error; ++ } ++ + *new_mc_adev = mc_adev; + return 0; +error: @@ -5186,6 +5196,9 @@ Signed-off-by: Biwen Li + return; + + fsl_mc_resource_free(resource); ++ ++ device_link_del(mc_adev->consumer_link); ++ mc_adev->consumer_link = NULL; +} +EXPORT_SYMBOL_GPL(fsl_mc_object_free); + @@ -6423,7 +6436,7 @@ Signed-off-by: Biwen Li -postcore_initcall(fsl_mc_bus_driver_init); --- /dev/null +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c -@@ -0,0 +1,1139 @@ +@@ -0,0 +1,1148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Freescale Management Complex (MC) bus driver @@ -7054,10 +7067,17 @@ Signed-off-by: Biwen Li + "dprc_get_obj_region() failed: %d\n", error); + goto error_cleanup_regions; + } -+ -+ error = translate_mc_addr(mc_dev, mc_region_type, -+ region_desc.base_offset, -+ ®ions[i].start); ++ /* Older MC only returned region offset and no base address ++ * If base address is in the region_desc use it otherwise ++ * revert to old mechanism ++ */ ++ if (region_desc.base_address) ++ regions[i].start = region_desc.base_address + ++ region_desc.base_offset; ++ else ++ error = translate_mc_addr(mc_dev, mc_region_type, ++ region_desc.base_offset, ++ ®ions[i].start); + if (error < 0) { + dev_err(parent_dev, + "Invalid MC offset: %#x (for %s.%d\'s region %d)\n", @@ -7071,6 +7091,8 @@ Signed-off-by: Biwen Li + regions[i].flags = IORESOURCE_IO; + if (region_desc.flags & DPRC_REGION_CACHEABLE) + regions[i].flags |= IORESOURCE_CACHEABLE; ++ if (region_desc.flags & DPRC_REGION_SHAREABLE) ++ regions[i].flags |= IORESOURCE_MEM; + } + + mc_dev->regions = regions; @@ -8884,7 +8906,7 @@ Signed-off-by: Biwen Li -EXPORT_SYMBOL_GPL(fsl_mc_portal_reset); --- /dev/null +++ b/drivers/bus/fsl-mc/mc-io.c -@@ -0,0 +1,268 @@ +@@ -0,0 +1,281 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright 2013-2016 Freescale Semiconductor Inc. @@ -9057,7 +9079,7 @@ Signed-off-by: Biwen Li + struct fsl_mc_resource *resource = NULL; + struct fsl_mc_io *mc_io = NULL; + -+ if (mc_dev->flags & FSL_MC_IS_DPRC) { ++ if (fsl_mc_is_root_dprc(&mc_dev->dev)) { + mc_bus_dev = mc_dev; + } else { + if (!dev_is_fsl_mc(mc_dev->dev.parent)) @@ -9096,9 +9118,19 @@ Signed-off-by: Biwen Li + if (error < 0) + goto error_cleanup_resource; + ++ dpmcp_dev->consumer_link = device_link_add(&mc_dev->dev, ++ &dpmcp_dev->dev, ++ DL_FLAG_AUTOREMOVE_CONSUMER); ++ if (!dpmcp_dev->consumer_link) { ++ error = -EINVAL; ++ goto error_cleanup_mc_io; ++ } ++ + *new_mc_io = mc_io; + return 0; + ++error_cleanup_mc_io: ++ fsl_destroy_mc_io(mc_io); +error_cleanup_resource: + fsl_mc_resource_free(resource); + return error; @@ -9131,6 +9163,9 @@ Signed-off-by: Biwen Li + + fsl_destroy_mc_io(mc_io); + fsl_mc_resource_free(resource); ++ ++ device_link_del(dpmcp_dev->consumer_link); ++ dpmcp_dev->consumer_link = NULL; +} +EXPORT_SYMBOL_GPL(fsl_mc_portal_free); + @@ -9878,20 +9913,9 @@ Signed-off-by: Biwen Li +} + +early_initcall(its_fsl_mc_msi_init); ---- a/drivers/staging/fsl-dpaa2/ethernet/README -+++ b/drivers/staging/fsl-dpaa2/ethernet/README -@@ -36,7 +36,7 @@ are treated as internal resources of oth - - For a more detailed description of the DPAA2 architecture and its object - abstractions see: -- drivers/staging/fsl-mc/README.txt -+ Documentation/networking/dpaa2/overview.rst - - Each Linux net device is built on top of a Datapath Network Interface (DPNI) - object and uses Buffer Pools (DPBPs), I/O Portals (DPIOs) and Concentrators --- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c -@@ -43,7 +43,7 @@ +@@ -16,7 +16,7 @@ #include #include #include @@ -9902,11 +9926,12 @@ Signed-off-by: Biwen Li --- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h +++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h -@@ -36,11 +36,10 @@ +@@ -9,12 +9,11 @@ #include #include #include +#include + #include #include "../../fsl-mc/include/dpaa2-io.h" #include "../../fsl-mc/include/dpaa2-fd.h" @@ -9917,7 +9942,7 @@ Signed-off-by: Biwen Li --- a/drivers/staging/fsl-dpaa2/ethernet/dpni.c +++ b/drivers/staging/fsl-dpaa2/ethernet/dpni.c -@@ -32,7 +32,7 @@ +@@ -4,7 +4,7 @@ */ #include #include @@ -9926,30 +9951,9 @@ Signed-off-by: Biwen Li #include "dpni.h" #include "dpni-cmd.h" ---- a/drivers/staging/fsl-mc/TODO -+++ /dev/null -@@ -1,18 +0,0 @@ --* Add at least one device driver for a DPAA2 object (child device of the -- fsl-mc bus). Most likely candidate for this is adding DPAA2 Ethernet -- driver support, which depends on drivers for several objects: DPNI, -- DPIO, DPMAC. Other pre-requisites include: -- -- * MC firmware uprev. The MC firmware upon which the fsl-mc -- bus driver and DPAA2 object drivers are based is continuing -- to evolve, so minor updates are needed to keep in sync with binary -- interface changes to the MC. -- --* Cleanup -- --Please send any patches to Greg Kroah-Hartman , --german.rivera@freescale.com, devel@driverdev.osuosl.org, --linux-kernel@vger.kernel.org -- --[1] https://lkml.org/lkml/2015/7/9/93 --[2] https://lkml.org/lkml/2015/7/7/712 --- a/drivers/staging/fsl-mc/bus/Kconfig +++ b/drivers/staging/fsl-mc/bus/Kconfig -@@ -5,16 +5,6 @@ +@@ -5,15 +5,6 @@ # Copyright (C) 2014-2016 Freescale Semiconductor, Inc. # @@ -9962,11 +9966,10 @@ Signed-off-by: Biwen Li - architecture. The fsl-mc bus driver handles discovery of - DPAA2 objects (which are represented as Linux devices) and - binding objects to drivers. -- + config FSL_MC_DPIO tristate "QorIQ DPAA2 DPIO driver" - depends on FSL_MC_BUS -@@ -24,3 +14,9 @@ config FSL_MC_DPIO +@@ -24,3 +15,9 @@ config FSL_MC_DPIO other DPAA2 objects. This driver does not expose the DPIO objects individually, but groups them under a service layer API. @@ -10000,9 +10003,9 @@ Signed-off-by: Biwen Li obj-$(CONFIG_FSL_MC_DPIO) += dpio/ --- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.c +++ b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.c -@@ -14,7 +14,7 @@ - #include +@@ -15,7 +15,7 @@ #include + #include -#include "../../include/mc.h" +#include @@ -11005,7 +11008,7 @@ Signed-off-by: Biwen Li static struct irq_chip its_msi_irq_chip = { --- /dev/null +++ b/include/linux/fsl/mc.h -@@ -0,0 +1,1020 @@ +@@ -0,0 +1,1029 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Freescale Management Complex (MC) bus public interface @@ -11208,6 +11211,7 @@ Signed-off-by: Biwen Li + struct fsl_mc_device_irq **irqs; + struct fsl_mc_resource *resource; + const char *driver_override; ++ struct device_link *consumer_link; +}; + +#define to_fsl_mc_device(_dev) \ @@ -11519,9 +11523,11 @@ Signed-off-by: Biwen Li + +/* DPRC command versioning */ +#define DPRC_CMD_BASE_VERSION 1 ++#define DPRC_CMD_2ND_VERSION 2 +#define DPRC_CMD_ID_OFFSET 4 + +#define DPRC_CMD(id) (((id) << DPRC_CMD_ID_OFFSET) | DPRC_CMD_BASE_VERSION) ++#define DPRC_CMD_V2(id) (((id) << DPRC_CMD_ID_OFFSET) | DPRC_CMD_2ND_VERSION) + +/* DPRC command IDs */ +#define DPRC_CMDID_CLOSE DPRC_CMD(0x800) @@ -11540,7 +11546,7 @@ Signed-off-by: Biwen Li +#define DPRC_CMDID_GET_CONT_ID DPRC_CMD(0x830) +#define DPRC_CMDID_GET_OBJ_COUNT DPRC_CMD(0x159) +#define DPRC_CMDID_GET_OBJ DPRC_CMD(0x15A) -+#define DPRC_CMDID_GET_OBJ_REG DPRC_CMD(0x15E) ++#define DPRC_CMDID_GET_OBJ_REG DPRC_CMD_V2(0x15E) +#define DPRC_CMDID_SET_OBJ_IRQ DPRC_CMD(0x15F) + +struct dprc_cmd_open { @@ -11643,7 +11649,7 @@ Signed-off-by: Biwen Li + /* response word 0 */ + __le64 pad0; + /* response word 1 */ -+ __le32 base_addr; ++ __le32 base_offset; + __le32 pad1; + /* response word 2 */ + __le32 size; @@ -11651,6 +11657,9 @@ Signed-off-by: Biwen Li + u8 pad2[3]; + /* response word 3 */ + __le32 flags; ++ __le32 pad3; ++ /* response word 4 */ ++ __le64 base_addr; +}; + +struct dprc_cmd_set_obj_irq { @@ -11783,6 +11792,7 @@ Signed-off-by: Biwen Li +/* Region flags */ +/* Cacheable - Indicates that region should be mapped as cacheable */ +#define DPRC_REGION_CACHEABLE 0x00000001 ++#define DPRC_REGION_SHAREABLE 0x00000002 + +/** + * enum dprc_region_type - Region type @@ -11791,7 +11801,8 @@ Signed-off-by: Biwen Li + */ +enum dprc_region_type { + DPRC_REGION_TYPE_MC_PORTAL, -+ DPRC_REGION_TYPE_QBMAN_PORTAL ++ DPRC_REGION_TYPE_QBMAN_PORTAL, ++ DPRC_REGION_TYPE_QBMAN_MEM_BACKED_PORTAL +}; + +/** @@ -11809,6 +11820,7 @@ Signed-off-by: Biwen Li + u32 size; + u32 flags; + enum dprc_region_type type; ++ u64 base_address; +}; + +int dprc_get_obj_region(struct fsl_mc_io *mc_io, diff --git a/target/linux/layerscape/patches-4.14/709-mdio-phy-support-layerscape.patch b/target/linux/layerscape/patches-4.14/709-mdio-phy-support-layerscape.patch index eeb4baaba7..b544114f3e 100644 --- a/target/linux/layerscape/patches-4.14/709-mdio-phy-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/709-mdio-phy-support-layerscape.patch @@ -1,28 +1,63 @@ -From 8eb578a8c1eb55715a40f02790e43aba4a528c38 Mon Sep 17 00:00:00 2001 +From 83fe1ecb8ac6e0544ae74bf5a63806dcac768201 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:51 +0800 -Subject: [PATCH 15/40] mdio-phy: support layerscae +Date: Wed, 17 Apr 2019 18:58:45 +0800 +Subject: [PATCH] mdio-phy: support layerscape + This is an integrated patch of mdio-phy for layerscape Signed-off-by: Bhaskar Upadhaya +Signed-off-by: Biwen Li Signed-off-by: Camelia Groza Signed-off-by: Constantin Tudor Signed-off-by: costi +Signed-off-by: Florin Chiculita +Signed-off-by: Florinel Iordache +Signed-off-by: Ioana Ciornei +Signed-off-by: Ioana Radulescu Signed-off-by: Madalin Bucur +Signed-off-by: Pankaj Bansal Signed-off-by: Shaohui Xie -Signed-off-by: Biwen Li +Signed-off-by: Valentin Catalin Neacsu +Signed-off-by: Vladimir Oltean --- - drivers/net/phy/Kconfig | 6 + - drivers/net/phy/Makefile | 1 + - drivers/net/phy/fsl_backplane.c | 1358 +++++++++++++++++++++++++++++++ - drivers/net/phy/swphy.c | 1 + - include/linux/phy.h | 3 + - 5 files changed, 1369 insertions(+) + drivers/net/phy/Kconfig | 33 + + drivers/net/phy/Makefile | 5 + + drivers/net/phy/aquantia.c | 328 +++- + drivers/net/phy/at803x.c | 21 + + drivers/net/phy/fsl_backplane.c | 1780 ++++++++++++++++++++ + drivers/net/phy/fsl_backplane.h | 41 + + drivers/net/phy/fsl_backplane_serdes_10g.c | 281 +++ + drivers/net/phy/fsl_backplane_serdes_28g.c | 336 ++++ + drivers/net/phy/inphi.c | 594 +++++++ + drivers/net/phy/mdio-mux-multiplexer.c | 122 ++ + drivers/net/phy/swphy.c | 1 + + include/linux/phy.h | 3 + + 12 files changed, 3526 insertions(+), 19 deletions(-) create mode 100644 drivers/net/phy/fsl_backplane.c + create mode 100644 drivers/net/phy/fsl_backplane.h + create mode 100644 drivers/net/phy/fsl_backplane_serdes_10g.c + create mode 100644 drivers/net/phy/fsl_backplane_serdes_28g.c + create mode 100644 drivers/net/phy/inphi.c + create mode 100644 drivers/net/phy/mdio-mux-multiplexer.c --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -90,6 +90,12 @@ config MDIO_BUS_MUX_MMIOREG +@@ -87,9 +87,27 @@ config MDIO_BUS_MUX_MMIOREG + + Currently, only 8/16/32 bits registers are supported. + ++config MDIO_BUS_MUX_MULTIPLEXER ++ tristate "MDIO bus multiplexer using kernel multiplexer subsystem" ++ depends on OF ++ select MULTIPLEXER ++ select MDIO_BUS_MUX ++ help ++ This module provides a driver for MDIO bus multiplexer ++ that is controlled via the kernel multiplexer subsystem. The ++ bus multiplexer connects one of several child MDIO busses to ++ a parent bus. Child bus selection is under the control of ++ the kernel multiplexer subsystem. ++ config MDIO_CAVIUM tristate @@ -35,23 +70,515 @@ Signed-off-by: Biwen Li config MDIO_GPIO tristate "GPIO lib-based bitbanged MDIO buses" depends on MDIO_BITBANG && GPIOLIB +@@ -303,6 +321,16 @@ config AT803X_PHY + ---help--- + Currently supports the AT8030 and AT8035 model + ++config AT803X_PHY_SMART_EEE ++ depends on AT803X_PHY ++ default n ++ tristate "SmartEEE feature for AT803X PHYs" ++ ---help--- ++ Enables the Atheros SmartEEE feature (not IEEE 802.3az). When 2 PHYs ++ which support this feature are connected back-to-back, they may ++ negotiate a low-power sleep mode autonomously, without the Ethernet ++ controller's knowledge. May cause packet loss. ++ + config BCM63XX_PHY + tristate "Broadcom 63xx SOCs internal PHY" + depends on BCM63XX +@@ -385,6 +413,11 @@ config ICPLUS_PHY + ---help--- + Currently supports the IP175C and IP1001 PHYs. + ++config INPHI_PHY ++ tristate "Inphi CDR 10G/25G Ethernet PHY" ++ ---help--- ++ Currently supports the IN112525_S03 part @ 25G ++ + config INTEL_XWAY_PHY + tristate "Intel XWAY PHYs" + ---help--- --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += +@@ -44,7 +44,11 @@ obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o + obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o ++obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o +obj-$(CONFIG_MDIO_FSL_BACKPLANE) += fsl_backplane.o ++obj-$(CONFIG_MDIO_FSL_BACKPLANE) += fsl_backplane_serdes_10g.o ++obj-$(CONFIG_MDIO_FSL_BACKPLANE) += fsl_backplane_serdes_28g.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o +@@ -75,6 +79,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o + obj-$(CONFIG_DP83867_PHY) += dp83867.o + obj-$(CONFIG_FIXED_PHY) += fixed_phy.o + obj-$(CONFIG_ICPLUS_PHY) += icplus.o ++obj-$(CONFIG_INPHI_PHY) += inphi.o + obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o + obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o + obj-$(CONFIG_LXT_PHY) += lxt.o +--- a/drivers/net/phy/aquantia.c ++++ b/drivers/net/phy/aquantia.c +@@ -4,6 +4,7 @@ + * Author: Shaohui Xie + * + * Copyright 2015 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any +@@ -27,15 +28,200 @@ + + #define PHY_AQUANTIA_FEATURES (SUPPORTED_10000baseT_Full | \ + SUPPORTED_1000baseT_Full | \ ++ SUPPORTED_2500baseX_Full | \ + SUPPORTED_100baseT_Full | \ ++ SUPPORTED_Pause | \ ++ SUPPORTED_Asym_Pause | \ + PHY_DEFAULT_FEATURES) + ++#define MDIO_PMA_CTRL1_AQ_SPEED10 0 ++#define MDIO_PMA_CTRL1_AQ_SPEED2500 0x2058 ++#define MDIO_PMA_CTRL1_AQ_SPEED5000 0x205c ++#define MDIO_PMA_CTRL2_AQ_2500BT 0x30 ++#define MDIO_PMA_CTRL2_AQ_5000BT 0x31 ++#define MDIO_PMA_CTRL2_AQ_TYPE_MASK 0x3F ++ ++#define MDIO_AN_VENDOR_PROV_CTRL 0xc400 ++#define MDIO_AN_RECV_LP_STATUS 0xe820 ++ ++#define MDIO_AN_LPA_PAUSE 0x20 ++#define MDIO_AN_LPA_ASYM_PAUSE 0x10 ++#define MDIO_AN_ADV_PAUSE 0x20 ++#define MDIO_AN_ADV_ASYM_PAUSE 0x10 ++ ++static int aquantia_write_reg(struct phy_device *phydev, int devad, ++ u32 regnum, u16 val) ++{ ++ u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff); ++ ++ return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, addr, val); ++} ++ ++static int aquantia_read_reg(struct phy_device *phydev, int devad, u32 regnum) ++{ ++ u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff); ++ ++ return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr); ++} ++ ++static int aquantia_pma_setup_forced(struct phy_device *phydev) ++{ ++ int ctrl1, ctrl2, ret; ++ ++ /* Half duplex is not supported */ ++ if (phydev->duplex != DUPLEX_FULL) ++ return -EINVAL; ++ ++ ctrl1 = aquantia_read_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); ++ if (ctrl1 < 0) ++ return ctrl1; ++ ++ ctrl2 = aquantia_read_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2); ++ if (ctrl2 < 0) ++ return ctrl2; ++ ++ ctrl1 &= ~MDIO_CTRL1_SPEEDSEL; ++ ctrl2 &= ~(MDIO_PMA_CTRL2_AQ_TYPE_MASK); ++ ++ switch (phydev->speed) { ++ case SPEED_10: ++ ctrl2 |= MDIO_PMA_CTRL2_10BT; ++ break; ++ case SPEED_100: ++ ctrl1 |= MDIO_PMA_CTRL1_SPEED100; ++ ctrl2 |= MDIO_PMA_CTRL2_100BTX; ++ break; ++ case SPEED_1000: ++ ctrl1 |= MDIO_PMA_CTRL1_SPEED1000; ++ /* Assume 1000base-T */ ++ ctrl2 |= MDIO_PMA_CTRL2_1000BT; ++ break; ++ case SPEED_10000: ++ ctrl1 |= MDIO_CTRL1_SPEED10G; ++ /* Assume 10Gbase-T */ ++ ctrl2 |= MDIO_PMA_CTRL2_10GBT; ++ break; ++ case SPEED_2500: ++ ctrl1 |= MDIO_PMA_CTRL1_AQ_SPEED2500; ++ ctrl2 |= MDIO_PMA_CTRL2_AQ_2500BT; ++ break; ++ case SPEED_5000: ++ ctrl1 |= MDIO_PMA_CTRL1_AQ_SPEED5000; ++ ctrl2 |= MDIO_PMA_CTRL2_AQ_5000BT; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ret = aquantia_write_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1); ++ if (ret < 0) ++ return ret; ++ ++ return aquantia_write_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2); ++} ++ ++static int aquantia_aneg(struct phy_device *phydev, bool control) ++{ ++ int reg = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_CTRL1); ++ ++ if (reg < 0) ++ return reg; ++ ++ if (control) ++ reg |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART; ++ else ++ reg &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); ++ ++ return aquantia_write_reg(phydev, MDIO_MMD_AN, MDIO_CTRL1, reg); ++} ++ ++static int aquantia_config_advert(struct phy_device *phydev) ++{ ++ u32 advertise; ++ int oldadv, adv, oldadv1, adv1; ++ int err, changed = 0; ++ ++ /* Only allow advertising what this PHY supports */ ++ phydev->advertising &= phydev->supported; ++ advertise = phydev->advertising; ++ ++ /* Setup standard advertisement */ ++ oldadv = aquantia_read_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_10GBT_CTRL); ++ if (oldadv < 0) ++ return oldadv; ++ ++ /* Aquantia vendor specific advertisments */ ++ oldadv1 = aquantia_read_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_VENDOR_PROV_CTRL); ++ if (oldadv1 < 0) ++ return oldadv1; ++ ++ adv = 0; ++ adv1 = 0; ++ ++ /*100BaseT_full is supported by default*/ ++ ++ if (advertise & ADVERTISED_1000baseT_Full) ++ adv1 |= 0x8000; ++ if (advertise & ADVERTISED_10000baseT_Full) ++ adv |= 0x1000; ++ if (advertise & ADVERTISED_2500baseX_Full) ++ adv1 |= 0x400; ++ ++ if (adv != oldadv) { ++ err = aquantia_write_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_10GBT_CTRL, adv); ++ if (err < 0) ++ return err; ++ changed = 1; ++ } ++ if (adv1 != oldadv1) { ++ err = aquantia_write_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_VENDOR_PROV_CTRL, adv1); ++ if (err < 0) ++ return err; ++ changed = 1; ++ } ++ ++ /* advertise flow control */ ++ oldadv = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); ++ if (oldadv < 0) ++ return oldadv; ++ ++ adv = oldadv & ~(MDIO_AN_ADV_PAUSE | MDIO_AN_ADV_ASYM_PAUSE); ++ if (advertise & ADVERTISED_Pause) ++ adv |= MDIO_AN_ADV_PAUSE; ++ if (advertise & ADVERTISED_Asym_Pause) ++ adv |= MDIO_AN_ADV_ASYM_PAUSE; ++ ++ if (adv != oldadv) { ++ err = aquantia_write_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_ADVERTISE, adv); ++ if (err < 0) ++ return err; ++ changed = 1; ++ } ++ ++ return changed; ++} ++ + static int aquantia_config_aneg(struct phy_device *phydev) + { ++ int ret = 0; ++ + phydev->supported = PHY_AQUANTIA_FEATURES; +- phydev->advertising = phydev->supported; ++ if (phydev->autoneg == AUTONEG_DISABLE) { ++ aquantia_pma_setup_forced(phydev); ++ return aquantia_aneg(phydev, false); ++ } + +- return 0; ++ ret = aquantia_config_advert(phydev); ++ if (ret > 0) ++ /* restart autoneg */ ++ return aquantia_aneg(phydev, true); ++ ++ return ret; + } + + static int aquantia_aneg_done(struct phy_device *phydev) +@@ -51,25 +237,26 @@ static int aquantia_config_intr(struct p + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { +- err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 1); ++ err = aquantia_write_reg(phydev, MDIO_MMD_AN, 0xd401, 1); + if (err < 0) + return err; + +- err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 1); ++ err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, 0xff00, 1); + if (err < 0) + return err; + +- err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0x1001); ++ err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, ++ 0xff01, 0x1001); + } else { +- err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 0); ++ err = aquantia_write_reg(phydev, MDIO_MMD_AN, 0xd401, 0); + if (err < 0) + return err; + +- err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 0); ++ err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, 0xff00, 0); + if (err < 0) + return err; + +- err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0); ++ err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, 0xff01, 0); + } + + return err; +@@ -79,42 +266,145 @@ static int aquantia_ack_interrupt(struct + { + int reg; + +- reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xcc01); ++ reg = aquantia_read_reg(phydev, MDIO_MMD_AN, 0xcc01); + return (reg < 0) ? reg : 0; + } + ++static int aquantia_read_advert(struct phy_device *phydev) ++{ ++ int adv, adv1; ++ ++ /* Setup standard advertisement */ ++ adv = aquantia_read_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_10GBT_CTRL); ++ ++ /* Aquantia vendor specific advertisments */ ++ adv1 = aquantia_read_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_VENDOR_PROV_CTRL); ++ ++ /*100BaseT_full is supported by default*/ ++ phydev->advertising |= ADVERTISED_100baseT_Full; ++ ++ if (adv & 0x1000) ++ phydev->advertising |= ADVERTISED_10000baseT_Full; ++ else ++ phydev->advertising &= ~ADVERTISED_10000baseT_Full; ++ if (adv1 & 0x8000) ++ phydev->advertising |= ADVERTISED_1000baseT_Full; ++ else ++ phydev->advertising &= ~ADVERTISED_1000baseT_Full; ++ if (adv1 & 0x400) ++ phydev->advertising |= ADVERTISED_2500baseX_Full; ++ else ++ phydev->advertising &= ~ADVERTISED_2500baseX_Full; ++ ++ /* flow control advertisement */ ++ adv = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); ++ if (adv & MDIO_AN_ADV_PAUSE) ++ phydev->advertising |= ADVERTISED_Pause; ++ else ++ phydev->advertising &= ~ADVERTISED_Pause; ++ if (adv & MDIO_AN_ADV_ASYM_PAUSE) ++ phydev->advertising |= ADVERTISED_Asym_Pause; ++ else ++ phydev->advertising &= ~ADVERTISED_Asym_Pause; ++ ++ return 0; ++} ++ ++static int aquantia_read_lp_advert(struct phy_device *phydev) ++{ ++ int adv, adv1; ++ ++ /* Read standard link partner advertisement */ ++ adv = aquantia_read_reg(phydev, MDIO_MMD_AN, ++ MDIO_STAT1); ++ ++ if (adv & 0x1) ++ phydev->lp_advertising |= ADVERTISED_Autoneg | ++ ADVERTISED_100baseT_Full; ++ else ++ phydev->lp_advertising &= ~(ADVERTISED_Autoneg | ++ ADVERTISED_100baseT_Full); ++ ++ /* Read standard link partner advertisement */ ++ adv = aquantia_read_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_10GBT_STAT); ++ ++ /* Aquantia link partner advertisments */ ++ adv1 = aquantia_read_reg(phydev, MDIO_MMD_AN, ++ MDIO_AN_RECV_LP_STATUS); ++ ++ if (adv & 0x800) ++ phydev->lp_advertising |= ADVERTISED_10000baseT_Full; ++ else ++ phydev->lp_advertising &= ~ADVERTISED_10000baseT_Full; ++ if (adv1 & 0x8000) ++ phydev->lp_advertising |= ADVERTISED_1000baseT_Full; ++ else ++ phydev->lp_advertising &= ~ADVERTISED_1000baseT_Full; ++ if (adv1 & 0x400) ++ phydev->lp_advertising |= ADVERTISED_2500baseX_Full; ++ else ++ phydev->lp_advertising &= ~ADVERTISED_2500baseX_Full; ++ ++ return 0; ++} ++ + static int aquantia_read_status(struct phy_device *phydev) + { + int reg; + +- reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); +- reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); ++ /* Read the link status twice; the bit is latching low */ ++ reg = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_STAT1); ++ reg = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_STAT1); ++ + if (reg & MDIO_STAT1_LSTATUS) + phydev->link = 1; + else + phydev->link = 0; + +- reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800); + mdelay(10); +- reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800); ++ reg = aquantia_read_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); ++ ++ if ((reg & MDIO_CTRL1_SPEEDSELEXT) == MDIO_CTRL1_SPEEDSELEXT) ++ reg &= MDIO_CTRL1_SPEEDSEL; ++ else ++ reg &= MDIO_CTRL1_SPEEDSELEXT; + + switch (reg) { +- case 0x9: ++ case MDIO_PMA_CTRL1_AQ_SPEED5000: ++ phydev->speed = SPEED_5000; ++ break; ++ case MDIO_PMA_CTRL1_AQ_SPEED2500: + phydev->speed = SPEED_2500; + break; +- case 0x5: +- phydev->speed = SPEED_1000; ++ case MDIO_PMA_CTRL1_AQ_SPEED10: ++ phydev->speed = SPEED_10; + break; +- case 0x3: ++ case MDIO_PMA_CTRL1_SPEED100: + phydev->speed = SPEED_100; + break; +- case 0x7: +- default: ++ case MDIO_PMA_CTRL1_SPEED1000: ++ phydev->speed = SPEED_1000; ++ break; ++ case MDIO_CTRL1_SPEED10G: + phydev->speed = SPEED_10000; + break; ++ default: ++ phydev->speed = SPEED_UNKNOWN; ++ break; + } ++ + phydev->duplex = DUPLEX_FULL; + ++ reg = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_AN_LPA); ++ phydev->pause = reg & MDIO_AN_LPA_PAUSE ? 1 : 0; ++ phydev->asym_pause = reg & MDIO_AN_LPA_ASYM_PAUSE ? 1 : 0; ++ ++ aquantia_read_advert(phydev); ++ aquantia_read_lp_advert(phydev); ++ + return 0; + } + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -68,6 +68,8 @@ + #define AT803X_DEBUG_REG_5 0x05 + #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + ++#define AT803X_LPI_EN BIT(8) ++ + #define ATH8030_PHY_ID 0x004dd076 + #define ATH8031_PHY_ID 0x004dd074 + #define ATH8032_PHY_ID 0x004dd023 +@@ -290,6 +292,19 @@ static void at803x_disable_smarteee(stru + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); + } + ++static void at803x_enable_smart_eee(struct phy_device *phydev, int on) ++{ ++ int value; ++ ++ /* 5.1.11 Smart_eee control3 */ ++ value = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x805D); ++ if (on) ++ value |= AT803X_LPI_EN; ++ else ++ value &= ~AT803X_LPI_EN; ++ phy_write_mmd(phydev, MDIO_MMD_PCS, 0x805D, value); ++} ++ + static int at803x_config_init(struct phy_device *phydev) + { + struct at803x_platform_data *pdata; +@@ -320,6 +335,12 @@ static int at803x_config_init(struct phy + if (ret < 0) + return ret; + ++#ifdef CONFIG_AT803X_PHY_SMART_EEE ++ at803x_enable_smart_eee(phydev, 1); ++#else ++ at803x_enable_smart_eee(phydev, 0); ++#endif ++ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { + ret = at803x_enable_rx_delay(phydev); --- /dev/null +++ b/drivers/net/phy/fsl_backplane.c -@@ -0,0 +1,1358 @@ -+/* Freescale backplane driver. +@@ -0,0 +1,1780 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * DPAA backplane driver. + * Author: Shaohui Xie ++ * Florinel Iordache + * + * Copyright 2015 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + * + * Licensed under the GPL-2 or later. + */ @@ -70,126 +597,130 @@ Signed-off-by: Biwen Li +#include +#include +#include ++#include + -+/* XFI PCS Device Identifier */ -+#define FSL_PCS_PHY_ID 0x0083e400 -+ -+/* Freescale KR PMD registers */ -+#define FSL_KR_PMD_CTRL 0x96 -+#define FSL_KR_PMD_STATUS 0x97 -+#define FSL_KR_LP_CU 0x98 -+#define FSL_KR_LP_STATUS 0x99 -+#define FSL_KR_LD_CU 0x9a -+#define FSL_KR_LD_STATUS 0x9b ++#include "fsl_backplane.h" + -+/* Freescale KR PMD defines */ -+#define PMD_RESET 0x1 -+#define PMD_STATUS_SUP_STAT 0x4 -+#define PMD_STATUS_FRAME_LOCK 0x2 -+#define TRAIN_EN 0x3 -+#define TRAIN_DISABLE 0x1 -+#define RX_STAT 0x1 + -+#define FSL_KR_RX_LINK_STAT_MASK 0x1000 -+#define FSL_XFI_PCS_10GR_SR1 0x20 ++/* PCS Device Identifier */ ++#define PCS_PHY_DEVICE_ID 0x0083e400 ++#define PCS_PHY_DEVICE_ID_MASK 0xffffffff + -+/* Freescale KX PCS mode register */ -+#define FSL_PCS_IF_MODE 0x8014 ++/* 10G Long cables setup: 1 m to 2 m cables */ ++#define RATIO_PREQ_10G 0x3 ++#define RATIO_PST1Q_10G 0xd ++#define RATIO_EQ_10G 0x20 + -+/* Freescale KX PCS mode register init value */ -+#define IF_MODE_INIT 0x8 ++/* 10G Short cables setup: up to 30 cm cable */ ++//#define RATIO_PREQ_10G 0x3 ++//#define RATIO_PST1Q_10G 0xa ++//#define RATIO_EQ_10G 0x29 + -+/* Freescale KX/KR AN registers */ -+#define FSL_AN_AD1 0x11 -+#define FSL_AN_BP_STAT 0x30 -+ -+/* Freescale KX/KR AN registers defines */ -+#define AN_CTRL_INIT 0x1200 -+#define KX_AN_AD1_INIT 0x25 -+#define KR_AN_AD1_INIT 0x85 -+#define AN_LNK_UP_MASK 0x4 -+#define KR_AN_MASK 0x8 -+#define TRAIN_FAIL 0x8 ++/* 40G Long cables setup: 1 m to 2 m cables */ ++#define RATIO_PREQ_40G 0x2 ++#define RATIO_PST1Q_40G 0xd ++#define RATIO_EQ_40G 0x20 + -+/* C(-1) */ -+#define BIN_M1 0 -+/* C(1) */ -+#define BIN_LONG 1 -+#define BIN_M1_SEL 6 -+#define BIN_Long_SEL 7 -+#define CDR_SEL_MASK 0x00070000 -+#define BIN_SNAPSHOT_NUM 5 -+#define BIN_M1_THRESHOLD 3 -+#define BIN_LONG_THRESHOLD 2 ++/* 40G Short cables setup: up to 30 cm cable */ ++//#define RATIO_PREQ_40G 0x1 ++//#define RATIO_PST1Q_40G 0x3 ++//#define RATIO_EQ_40G 0x29 + -+#define PRE_COE_SHIFT 22 -+#define POST_COE_SHIFT 16 -+#define ZERO_COE_SHIFT 8 ++/* LX2 2x40G default RCW setup */ ++//#define RATIO_PREQ_40G 0x0 ++//#define RATIO_PST1Q_40G 0x3 ++//#define RATIO_EQ_40G 0x30 + -+#define PRE_COE_MAX 0x0 -+#define PRE_COE_MIN 0x8 ++/* Max/Min coefficient values */ ++#define PRE_COE_MAX 0x0 ++#define PRE_COE_MIN 0x8 +#define POST_COE_MAX 0x0 +#define POST_COE_MIN 0x10 +#define ZERO_COE_MAX 0x30 +#define ZERO_COE_MIN 0x0 + -+#define TECR0_INIT 0x24200000 -+#define RATIO_PREQ 0x3 -+#define RATIO_PST1Q 0xd -+#define RATIO_EQ 0x20 ++/* KR PMD defines */ ++#define PMD_RESET 0x1 ++#define PMD_STATUS_SUP_STAT 0x4 ++#define PMD_STATUS_FRAME_LOCK 0x2 ++#define TRAIN_EN 0x3 ++#define TRAIN_DISABLE 0x1 ++#define RX_STAT 0x1 + -+#define GCR0_RESET_MASK 0x600000 -+#define GCR1_SNP_START_MASK 0x00000040 -+#define GCR1_CTL_SNP_START_MASK 0x00002000 -+#define GCR1_REIDL_TH_MASK 0x00700000 -+#define GCR1_REIDL_EX_SEL_MASK 0x000c0000 -+#define GCR1_REIDL_ET_MAS_MASK 0x00004000 -+#define TECR0_AMP_RED_MASK 0x0000003f ++/* PCS Link up */ ++#define XFI_PCS_SR1 0x20 ++#define KR_RX_LINK_STAT_MASK 0x1000 + -+#define RECR1_CTL_SNP_DONE_MASK 0x00000002 -+#define RECR1_SNP_DONE_MASK 0x00000004 -+#define TCSR1_SNP_DATA_MASK 0x0000ffc0 -+#define TCSR1_SNP_DATA_SHIFT 6 -+#define TCSR1_EQ_SNPBIN_SIGN_MASK 0x100 ++/* KX PCS mode register */ ++#define KX_PCS_IF_MODE 0x8014 + -+#define RECR1_GAINK2_MASK 0x0f000000 -+#define RECR1_GAINK2_SHIFT 24 -+#define RECR1_GAINK3_MASK 0x000f0000 -+#define RECR1_GAINK3_SHIFT 16 -+#define RECR1_OFFSET_MASK 0x00003f80 -+#define RECR1_OFFSET_SHIFT 7 -+#define RECR1_BLW_MASK 0x00000f80 -+#define RECR1_BLW_SHIFT 7 -+#define EYE_CTRL_SHIFT 12 -+#define BASE_WAND_SHIFT 10 ++/* KX PCS mode register init value */ ++#define KX_IF_MODE_INIT 0x8 ++ ++/* KX/KR AN registers */ ++#define AN_CTRL_INIT 0x1200 ++#define KX_AN_AD1_INIT 0x25 ++#define KR_AN_AD1_INIT_10G 0x85 ++#define KR_AN_AD1_INIT_40G 0x105 ++#define AN_LNK_UP_MASK 0x4 ++#define KR_AN_MASK_10G 0x8 ++#define KR_AN_MASK_40G 0x20 ++#define TRAIN_FAIL 0x8 ++#define KR_AN_40G_MDIO_OFFSET 4 + ++/* XGKR Timeouts */ +#define XGKR_TIMEOUT 1050 ++#define XGKR_DENY_RT_INTERVAL 3000 ++#define XGKR_AN_WAIT_ITERATIONS 5 + -+#define INCREMENT 1 -+#define DECREMENT 2 ++/* XGKR Increment/Decrement Requests */ ++#define INCREMENT 1 ++#define DECREMENT 2 +#define TIMEOUT_LONG 3 -+#define TIMEOUT_M1 3 ++#define TIMEOUT_M1 3 + ++/* XGKR Masks */ +#define RX_READY_MASK 0x8000 -+#define PRESET_MASK 0x2000 -+#define INIT_MASK 0x1000 -+#define COP1_MASK 0x30 -+#define COP1_SHIFT 4 -+#define COZ_MASK 0xc -+#define COZ_SHIFT 2 -+#define COM1_MASK 0x3 -+#define COM1_SHIFT 0 ++#define PRESET_MASK 0x2000 ++#define INIT_MASK 0x1000 ++#define COP1_MASK 0x30 ++#define COP1_SHIFT 4 ++#define COZ_MASK 0xc ++#define COZ_SHIFT 2 ++#define COM1_MASK 0x3 ++#define COM1_SHIFT 0 +#define REQUEST_MASK 0x3f +#define LD_ALL_MASK (PRESET_MASK | INIT_MASK | \ + COP1_MASK | COZ_MASK | COM1_MASK) + ++/* Lanes definitions */ ++#define MASTER_LANE 0 ++#define SINGLE_LANE 0 ++#define MAX_PHY_LANES_NO 4 ++ ++/* Invalid value */ ++#define VAL_INVALID 0xff ++ ++/* New XGKR Training Algorithm */ +#define NEW_ALGORITHM_TRAIN_TX ++ +#ifdef NEW_ALGORITHM_TRAIN_TX -+#define FORCE_INC_COP1_NUMBER 0 -+#define FORCE_INC_COM1_NUMBER 1 ++#define FORCE_INC_COP1_NUMBER 0 ++#define FORCE_INC_COM1_NUMBER 1 +#endif + -+#define VAL_INVALID 0xff ++/* Link_Training_Registers offsets */ ++static int lt_MDIO_MMD = 0; ++static u32 lt_KR_PMD_CTRL = 0; ++static u32 lt_KR_PMD_STATUS = 0; ++static u32 lt_KR_LP_CU = 0; ++static u32 lt_KR_LP_STATUS = 0; ++static u32 lt_KR_LD_CU = 0; ++static u32 lt_KR_LD_STATUS = 0; ++ ++/* KX/KR AN registers offsets */ ++static u32 g_an_AD1 = 0; ++static u32 g_an_BP_STAT = 0; + +static const u32 preq_table[] = {0x0, 0x1, 0x3, 0x5, + 0x7, 0x9, 0xb, 0xc, VAL_INVALID}; @@ -199,9 +730,16 @@ Signed-off-by: Biwen Li +enum backplane_mode { + PHY_BACKPLANE_1000BASE_KX, + PHY_BACKPLANE_10GBASE_KR, ++ PHY_BACKPLANE_40GBASE_KR, + PHY_BACKPLANE_INVAL +}; + ++enum serdes_type { ++ SERDES_10G, ++ SERDES_28G, ++ SERDES_INVAL ++}; ++ +enum coe_filed { + COE_COP1, + COE_COZ, @@ -221,25 +759,6 @@ Signed-off-by: Biwen Li + TRAINED, +}; + -+struct per_lane_ctrl_status { -+ __be32 gcr0; /* 0x.000 - General Control Register 0 */ -+ __be32 gcr1; /* 0x.004 - General Control Register 1 */ -+ __be32 gcr2; /* 0x.008 - General Control Register 2 */ -+ __be32 resv1; /* 0x.00C - Reserved */ -+ __be32 recr0; /* 0x.010 - Receive Equalization Control Register 0 */ -+ __be32 recr1; /* 0x.014 - Receive Equalization Control Register 1 */ -+ __be32 tecr0; /* 0x.018 - Transmit Equalization Control Register 0 */ -+ __be32 resv2; /* 0x.01C - Reserved */ -+ __be32 tlcr0; /* 0x.020 - TTL Control Register 0 */ -+ __be32 tlcr1; /* 0x.024 - TTL Control Register 1 */ -+ __be32 tlcr2; /* 0x.028 - TTL Control Register 2 */ -+ __be32 tlcr3; /* 0x.02C - TTL Control Register 3 */ -+ __be32 tcsr0; /* 0x.030 - Test Control/Status Register 0 */ -+ __be32 tcsr1; /* 0x.034 - Test Control/Status Register 1 */ -+ __be32 tcsr2; /* 0x.038 - Test Control/Status Register 2 */ -+ __be32 tcsr3; /* 0x.03C - Test Control/Status Register 3 */ -+}; -+ +struct tx_condition { + bool bin_m1_late_early; + bool bin_long_late_early; @@ -255,19 +774,152 @@ Signed-off-by: Biwen Li +#endif +}; + -+struct fsl_xgkr_inst { -+ void *reg_base; ++struct xgkr_params { ++ void *reg_base; /* lane memory map: registers base address */ ++ int idx; /* lane relative index inside a multi-lane PHY */ + struct phy_device *phydev; ++ struct serdes_access *srds; + struct tx_condition tx_c; + struct delayed_work xgkr_wk; + enum train_state state; ++ int an_wait_count; ++ unsigned long rt_time; + u32 ld_update; + u32 ld_status; + u32 ratio_preq; + u32 ratio_pst1q; + u32 adpt_eq; ++ u32 tuned_ratio_preq; ++ u32 tuned_ratio_pst1q; ++ u32 tuned_adpt_eq; ++}; ++ ++struct xgkr_phy_data { ++ int bp_mode; ++ u32 phy_lanes; ++ struct mutex phy_lock; ++ bool aneg_done; ++ struct xgkr_params xgkr[MAX_PHY_LANES_NO]; +}; + ++static void setup_an_lt_ls(void) ++{ ++ /* KR PMD registers */ ++ lt_MDIO_MMD = MDIO_MMD_PMAPMD; ++ lt_KR_PMD_CTRL = 0x96; ++ lt_KR_PMD_STATUS = 0x97; ++ lt_KR_LP_CU = 0x98; ++ lt_KR_LP_STATUS = 0x99; ++ lt_KR_LD_CU = 0x9a; ++ lt_KR_LD_STATUS = 0x9b; ++ ++ /* KX/KR AN registers */ ++ g_an_AD1 = 0x11; ++ g_an_BP_STAT = 0x30; ++} ++ ++static void setup_an_lt_lx(void) ++{ ++ /* Auto-Negotiation and Link Training Core Registers page 1: 256 = 0x100 */ ++ lt_MDIO_MMD = MDIO_MMD_AN; ++ lt_KR_PMD_CTRL = 0x100; ++ lt_KR_PMD_STATUS = 0x101; ++ lt_KR_LP_CU = 0x102; ++ lt_KR_LP_STATUS = 0x103; ++ lt_KR_LD_CU = 0x104; ++ lt_KR_LD_STATUS = 0x105; ++ ++ /* KX/KR AN registers */ ++ g_an_AD1 = 0x03; ++ g_an_BP_STAT = 0x0F; ++} ++ ++static u32 le_ioread32(u32 *reg) ++{ ++ return ioread32(reg); ++} ++ ++static void le_iowrite32(u32 value, u32 *reg) ++{ ++ iowrite32(value, reg); ++} ++ ++static u32 be_ioread32(u32 *reg) ++{ ++ return ioread32be(reg); ++} ++ ++static void be_iowrite32(u32 value, u32 *reg) ++{ ++ iowrite32be(value, reg); ++} ++ ++/** ++ * xgkr_phy_write_mmd - Wrapper function for phy_write_mmd ++ * for writing a register on an MMD on a given PHY. ++ * ++ * Same rules as for phy_write_mmd(); ++ */ ++static int xgkr_phy_write_mmd(struct xgkr_params *xgkr, int devad, u32 regnum, u16 val) ++{ ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ int mdio_addr = phydev->mdio.addr; ++ int err; ++ ++ mutex_lock(&xgkr_inst->phy_lock); ++ ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { ++ //40G AN: prepare mdio address for writing phydev AN registers for 40G on respective lane ++ phydev->mdio.addr = KR_AN_40G_MDIO_OFFSET + xgkr->idx; ++ } ++ ++ err = phy_write_mmd(phydev, devad, regnum, val); ++ if (err) ++ dev_err(&phydev->mdio.dev, "Writing PHY (%p) MMD = 0x%02x register = 0x%02x failed with error code: 0x%08x \n", phydev, devad, regnum, err); ++ ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { ++ //40G AN: restore mdio address ++ phydev->mdio.addr = mdio_addr; ++ } ++ ++ mutex_unlock(&xgkr_inst->phy_lock); ++ ++ return err; ++} ++ ++/** ++ * xgkr_phy_read_mmd - Wrapper function for phy_read_mmd ++ * for reading a register from an MMD on a given PHY. ++ * ++ * Same rules as for phy_read_mmd(); ++ */ ++static int xgkr_phy_read_mmd(struct xgkr_params *xgkr, int devad, u32 regnum) ++{ ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ int mdio_addr = phydev->mdio.addr; ++ int ret; ++ ++ mutex_lock(&xgkr_inst->phy_lock); ++ ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { ++ //40G AN: prepare mdio address for reading phydev AN registers for 40G on respective lane ++ phydev->mdio.addr = KR_AN_40G_MDIO_OFFSET + xgkr->idx; ++ } ++ ++ ret = phy_read_mmd(phydev, devad, regnum); ++ ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { ++ //40G AN: restore mdio address ++ phydev->mdio.addr = mdio_addr; ++ } ++ ++ mutex_unlock(&xgkr_inst->phy_lock); ++ ++ return ret; ++} ++ +static void tx_condition_init(struct tx_condition *tx_c) +{ + tx_c->bin_m1_late_early = true; @@ -284,88 +936,59 @@ Signed-off-by: Biwen Li +#endif +} + -+void tune_tecr0(struct fsl_xgkr_inst *inst) ++void tune_tecr(struct xgkr_params *xgkr) +{ -+ struct per_lane_ctrl_status *reg_base = inst->reg_base; -+ u32 val; -+ -+ val = TECR0_INIT | -+ inst->adpt_eq << ZERO_COE_SHIFT | -+ inst->ratio_preq << PRE_COE_SHIFT | -+ inst->ratio_pst1q << POST_COE_SHIFT; ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ bool reset = false; ++ ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { ++ /* Reset only the Master Lane */ ++ reset = (xgkr->idx == MASTER_LANE); ++ } else { ++ reset = true; ++ } ++ ++ xgkr->srds->tune_tecr(xgkr->reg_base, xgkr->ratio_preq, xgkr->ratio_pst1q, xgkr->adpt_eq, reset); + -+ /* reset the lane */ -+ iowrite32(ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, -+ ®_base->gcr0); -+ udelay(1); -+ iowrite32(val, ®_base->tecr0); -+ udelay(1); -+ /* unreset the lane */ -+ iowrite32(ioread32(®_base->gcr0) | GCR0_RESET_MASK, -+ ®_base->gcr0); -+ udelay(1); ++ xgkr->tuned_ratio_preq = xgkr->ratio_preq; ++ xgkr->tuned_ratio_pst1q = xgkr->ratio_pst1q; ++ xgkr->tuned_adpt_eq = xgkr->adpt_eq; +} + -+static void start_lt(struct phy_device *phydev) ++static void start_lt(struct xgkr_params *xgkr) +{ -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_CTRL, TRAIN_EN); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_CTRL, TRAIN_EN); +} + -+static void stop_lt(struct phy_device *phydev) ++static void stop_lt(struct xgkr_params *xgkr) +{ -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_CTRL, TRAIN_DISABLE); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_CTRL, TRAIN_DISABLE); +} + -+static void reset_gcr0(struct fsl_xgkr_inst *inst) ++static void reset_lt(struct xgkr_params *xgkr) +{ -+ struct per_lane_ctrl_status *reg_base = inst->reg_base; -+ -+ iowrite32(ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, -+ ®_base->gcr0); -+ udelay(1); -+ iowrite32(ioread32(®_base->gcr0) | GCR0_RESET_MASK, -+ ®_base->gcr0); -+ udelay(1); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, MDIO_CTRL1, PMD_RESET); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_CTRL, TRAIN_DISABLE); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LD_CU, 0); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LD_STATUS, 0); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_STATUS, 0); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_CU, 0); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_STATUS, 0); ++ +} + -+void lane_set_1gkx(void *reg) ++static void ld_coe_status(struct xgkr_params *xgkr) +{ -+ struct per_lane_ctrl_status *reg_base = reg; -+ u32 val; -+ -+ /* reset the lane */ -+ iowrite32(ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, -+ ®_base->gcr0); -+ udelay(1); -+ -+ /* set gcr1 for 1GKX */ -+ val = ioread32(®_base->gcr1); -+ val &= ~(GCR1_REIDL_TH_MASK | GCR1_REIDL_EX_SEL_MASK | -+ GCR1_REIDL_ET_MAS_MASK); -+ iowrite32(val, ®_base->gcr1); -+ udelay(1); -+ -+ /* set tecr0 for 1GKX */ -+ val = ioread32(®_base->tecr0); -+ val &= ~TECR0_AMP_RED_MASK; -+ iowrite32(val, ®_base->tecr0); -+ udelay(1); -+ -+ /* unreset the lane */ -+ iowrite32(ioread32(®_base->gcr0) | GCR0_RESET_MASK, -+ ®_base->gcr0); -+ udelay(1); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, ++ lt_KR_LD_STATUS, xgkr->ld_status); +} + -+static void reset_lt(struct phy_device *phydev) ++static void ld_coe_update(struct xgkr_params *xgkr) +{ -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, PMD_RESET); -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_CTRL, TRAIN_DISABLE); -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LD_CU, 0); -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LD_STATUS, 0); -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_STATUS, 0); -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_CU, 0); -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_STATUS, 0); ++ dev_dbg(&xgkr->phydev->mdio.dev, "sending request: %x\n", xgkr->ld_update); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, ++ lt_KR_LD_CU, xgkr->ld_update); +} + +static void start_xgkr_state_machine(struct delayed_work *work) @@ -374,191 +997,110 @@ Signed-off-by: Biwen Li + msecs_to_jiffies(XGKR_TIMEOUT)); +} + -+static void start_xgkr_an(struct phy_device *phydev) ++static void start_xgkr_an(struct xgkr_params *xgkr) +{ -+ struct fsl_xgkr_inst *inst; ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ int i; ++ int err; + -+ reset_lt(phydev); -+ phy_write_mmd(phydev, MDIO_MMD_AN, FSL_AN_AD1, KR_AN_AD1_INIT); -+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); ++ switch (xgkr_inst->bp_mode) ++ { ++ case PHY_BACKPLANE_1000BASE_KX: ++ dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); ++ break; + -+ inst = phydev->priv; ++ case PHY_BACKPLANE_10GBASE_KR: ++ err = xgkr_phy_write_mmd(xgkr, MDIO_MMD_AN, g_an_AD1, KR_AN_AD1_INIT_10G); ++ if (err) ++ dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x failed with error code: 0x%08x \n", g_an_AD1, err); ++ udelay(1); ++ err = xgkr_phy_write_mmd(xgkr, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); ++ if (err) ++ dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x failed with error code: 0x%08x \n", MDIO_CTRL1, err); ++ break; + -+ /* start state machine*/ -+ start_xgkr_state_machine(&inst->xgkr_wk); -+} ++ case PHY_BACKPLANE_40GBASE_KR: ++ if (xgkr->idx == MASTER_LANE) { ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) { ++ err = xgkr_phy_write_mmd(&xgkr_inst->xgkr[i], MDIO_MMD_AN, g_an_AD1, KR_AN_AD1_INIT_40G); ++ if (err) ++ dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x on lane %d failed with error code: 0x%08x \n", g_an_AD1, xgkr_inst->xgkr[i].idx, err); ++ } ++ udelay(1); ++ err = xgkr_phy_write_mmd(xgkr, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); ++ if (err) ++ dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x on Master Lane failed with error code: 0x%08x \n", MDIO_CTRL1, err); ++ } ++ break; ++ } ++} + +static void start_1gkx_an(struct phy_device *phydev) +{ -+ phy_write_mmd(phydev, MDIO_MMD_PCS, FSL_PCS_IF_MODE, IF_MODE_INIT); -+ phy_write_mmd(phydev, MDIO_MMD_AN, FSL_AN_AD1, KX_AN_AD1_INIT); ++ phy_write_mmd(phydev, MDIO_MMD_PCS, KX_PCS_IF_MODE, KX_IF_MODE_INIT); ++ phy_write_mmd(phydev, MDIO_MMD_AN, g_an_AD1, KX_AN_AD1_INIT); + phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); +} + -+static void ld_coe_status(struct fsl_xgkr_inst *inst) ++static void reset_tecr(struct xgkr_params *xgkr) +{ -+ phy_write_mmd(inst->phydev, MDIO_MMD_PMAPMD, -+ FSL_KR_LD_STATUS, inst->ld_status); -+} ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; + -+static void ld_coe_update(struct fsl_xgkr_inst *inst) -+{ -+ dev_dbg(&inst->phydev->mdio.dev, "sending request: %x\n", inst->ld_update); -+ phy_write_mmd(inst->phydev, MDIO_MMD_PMAPMD, -+ FSL_KR_LD_CU, inst->ld_update); -+} ++ switch (xgkr_inst->bp_mode) ++ { ++ case PHY_BACKPLANE_1000BASE_KX: ++ dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); ++ break; + -+static void init_inst(struct fsl_xgkr_inst *inst, int reset) -+{ -+ if (reset) { -+ inst->ratio_preq = RATIO_PREQ; -+ inst->ratio_pst1q = RATIO_PST1Q; -+ inst->adpt_eq = RATIO_EQ; -+ tune_tecr0(inst); ++ case PHY_BACKPLANE_10GBASE_KR: ++ xgkr->ratio_preq = RATIO_PREQ_10G; ++ xgkr->ratio_pst1q = RATIO_PST1Q_10G; ++ xgkr->adpt_eq = RATIO_EQ_10G; ++ break; ++ ++ case PHY_BACKPLANE_40GBASE_KR: ++ xgkr->ratio_preq = RATIO_PREQ_40G; ++ xgkr->ratio_pst1q = RATIO_PST1Q_40G; ++ xgkr->adpt_eq = RATIO_EQ_40G; ++ break; + } + -+ tx_condition_init(&inst->tx_c); -+ inst->state = DETECTING_LP; -+ inst->ld_status &= RX_READY_MASK; -+ ld_coe_status(inst); -+ inst->ld_update = 0; -+ inst->ld_status &= ~RX_READY_MASK; -+ ld_coe_status(inst); ++ tune_tecr(xgkr); +} + -+#ifdef NEW_ALGORITHM_TRAIN_TX -+static int get_median_gaink2(u32 *reg) ++static void init_xgkr(struct xgkr_params *xgkr, int reset) +{ -+ int gaink2_snap_shot[BIN_SNAPSHOT_NUM]; -+ u32 rx_eq_snp; -+ struct per_lane_ctrl_status *reg_base; -+ int timeout; -+ int i, j, tmp, pos; -+ -+ reg_base = (struct per_lane_ctrl_status *)reg; -+ -+ for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { -+ /* wait RECR1_CTL_SNP_DONE_MASK has cleared */ -+ timeout = 100; -+ while (ioread32(®_base->recr1) & -+ RECR1_CTL_SNP_DONE_MASK) { -+ udelay(1); -+ timeout--; -+ if (timeout == 0) -+ break; -+ } -+ -+ /* start snap shot */ -+ iowrite32((ioread32(®_base->gcr1) | -+ GCR1_CTL_SNP_START_MASK), -+ ®_base->gcr1); -+ -+ /* wait for SNP done */ -+ timeout = 100; -+ while (!(ioread32(®_base->recr1) & -+ RECR1_CTL_SNP_DONE_MASK)) { -+ udelay(1); -+ timeout--; -+ if (timeout == 0) -+ break; -+ } ++ if (reset) ++ reset_tecr(xgkr); + -+ /* read and save the snap shot */ -+ rx_eq_snp = ioread32(®_base->recr1); -+ gaink2_snap_shot[i] = (rx_eq_snp & RECR1_GAINK2_MASK) >> -+ RECR1_GAINK2_SHIFT; -+ -+ /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ -+ iowrite32((ioread32(®_base->gcr1) & -+ ~GCR1_CTL_SNP_START_MASK), -+ ®_base->gcr1); -+ } -+ -+ /* get median of the 5 snap shot */ -+ for (i = 0; i < BIN_SNAPSHOT_NUM - 1; i++) { -+ tmp = gaink2_snap_shot[i]; -+ pos = i; -+ for (j = i + 1; j < BIN_SNAPSHOT_NUM; j++) { -+ if (gaink2_snap_shot[j] < tmp) { -+ tmp = gaink2_snap_shot[j]; -+ pos = j; -+ } -+ } ++ tx_condition_init(&xgkr->tx_c); ++ xgkr->state = DETECTING_LP; + -+ gaink2_snap_shot[pos] = gaink2_snap_shot[i]; -+ gaink2_snap_shot[i] = tmp; -+ } ++ xgkr->ld_status &= RX_READY_MASK; ++ ld_coe_status(xgkr); ++ xgkr->ld_update = 0; ++ xgkr->ld_status &= ~RX_READY_MASK; ++ ld_coe_status(xgkr); + -+ return gaink2_snap_shot[2]; +} -+#endif + -+static bool is_bin_early(int bin_sel, void *reg) ++static void initialize(struct xgkr_params *xgkr) +{ -+ bool early = false; -+ int bin_snap_shot[BIN_SNAPSHOT_NUM]; -+ int i, negative_count = 0; -+ struct per_lane_ctrl_status *reg_base = reg; -+ int timeout; -+ -+ for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { -+ /* wait RECR1_SNP_DONE_MASK has cleared */ -+ timeout = 100; -+ while ((ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { -+ udelay(1); -+ timeout--; -+ if (timeout == 0) -+ break; -+ } -+ -+ /* set TCSR1[CDR_SEL] to BinM1/BinLong */ -+ if (bin_sel == BIN_M1) { -+ iowrite32((ioread32(®_base->tcsr1) & -+ ~CDR_SEL_MASK) | BIN_M1_SEL, -+ ®_base->tcsr1); -+ } else { -+ iowrite32((ioread32(®_base->tcsr1) & -+ ~CDR_SEL_MASK) | BIN_Long_SEL, -+ ®_base->tcsr1); -+ } ++ reset_tecr(xgkr); + -+ /* start snap shot */ -+ iowrite32(ioread32(®_base->gcr1) | GCR1_SNP_START_MASK, -+ ®_base->gcr1); -+ -+ /* wait for SNP done */ -+ timeout = 100; -+ while (!(ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { -+ udelay(1); -+ timeout--; -+ if (timeout == 0) -+ break; -+ } -+ -+ /* read and save the snap shot */ -+ bin_snap_shot[i] = (ioread32(®_base->tcsr1) & -+ TCSR1_SNP_DATA_MASK) >> TCSR1_SNP_DATA_SHIFT; -+ if (bin_snap_shot[i] & TCSR1_EQ_SNPBIN_SIGN_MASK) -+ negative_count++; -+ -+ /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ -+ iowrite32(ioread32(®_base->gcr1) & ~GCR1_SNP_START_MASK, -+ ®_base->gcr1); -+ } -+ -+ if (((bin_sel == BIN_M1) && (negative_count > BIN_M1_THRESHOLD)) || -+ ((bin_sel == BIN_LONG && (negative_count > BIN_LONG_THRESHOLD)))) { -+ early = true; -+ } -+ -+ return early; ++ xgkr->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); ++ xgkr->ld_status |= COE_UPDATED << COP1_SHIFT | ++ COE_UPDATED << COZ_SHIFT | ++ COE_UPDATED << COM1_SHIFT; ++ ld_coe_status(xgkr); +} + -+static void train_tx(struct fsl_xgkr_inst *inst) ++static void train_remote_tx(struct xgkr_params *xgkr) +{ -+ struct phy_device *phydev = inst->phydev; -+ struct tx_condition *tx_c = &inst->tx_c; ++ struct tx_condition *tx_c = &xgkr->tx_c; + bool bin_m1_early, bin_long_early; + u32 lp_status, old_ld_update; + u32 status_cop1, status_coz, status_com1; @@ -571,11 +1113,13 @@ Signed-off-by: Biwen Li +recheck: + if (tx_c->bin_long_stop && tx_c->bin_m1_stop) { + tx_c->tx_complete = true; -+ inst->ld_status |= RX_READY_MASK; -+ ld_coe_status(inst); ++ xgkr->ld_status |= RX_READY_MASK; ++ ld_coe_status(xgkr); ++ + /* tell LP we are ready */ -+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, -+ FSL_KR_PMD_STATUS, RX_STAT); ++ xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, ++ lt_KR_PMD_STATUS, RX_STAT); ++ + return; + } + @@ -583,13 +1127,14 @@ Signed-off-by: Biwen Li + * we can clear up the appropriate update request so that the + * subsequent code may easily issue new update requests if needed. + */ -+ lp_status = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_STATUS) & ++ lp_status = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_STATUS) & + REQUEST_MASK; ++ + status_cop1 = (lp_status & COP1_MASK) >> COP1_SHIFT; + status_coz = (lp_status & COZ_MASK) >> COZ_SHIFT; + status_com1 = (lp_status & COM1_MASK) >> COM1_SHIFT; + -+ old_ld_update = inst->ld_update; ++ old_ld_update = xgkr->ld_update; + req_cop1 = (old_ld_update & COP1_MASK) >> COP1_SHIFT; + req_coz = (old_ld_update & COZ_MASK) >> COZ_SHIFT; + req_com1 = (old_ld_update & COM1_MASK) >> COM1_SHIFT; @@ -603,7 +1148,7 @@ Signed-off-by: Biwen Li + if ((status_cop1 == COE_UPDATED || status_cop1 == COE_MAX) && + (status_coz == COE_UPDATED || status_coz == COE_MAX) && + (status_com1 == COE_UPDATED || status_com1 == COE_MAX)) { -+ inst->ld_update &= ~PRESET_MASK; ++ xgkr->ld_update &= ~PRESET_MASK; + } + } + @@ -614,7 +1159,7 @@ Signed-off-by: Biwen Li + if (status_cop1 != COE_NOTUPDATED && + status_coz != COE_NOTUPDATED && + status_com1 != COE_NOTUPDATED) { -+ inst->ld_update &= ~INIT_MASK; ++ xgkr->ld_update &= ~INIT_MASK; + } + } + @@ -624,7 +1169,7 @@ Signed-off-by: Biwen Li + */ + if (!tx_c->sent_init) { + if (!lp_status && !(old_ld_update & (LD_ALL_MASK))) { -+ inst->ld_update = INIT_MASK; ++ xgkr->ld_update = INIT_MASK; + tx_c->sent_init = true; + } + } @@ -636,7 +1181,7 @@ Signed-off-by: Biwen Li + */ + if (status_cop1 != COE_NOTUPDATED) { + if (req_cop1) { -+ inst->ld_update &= ~COP1_MASK; ++ xgkr->ld_update &= ~COP1_MASK; +#ifdef NEW_ALGORITHM_TRAIN_TX + if (tx_c->post_inc) { + if (req_cop1 == INCREMENT && @@ -648,19 +1193,19 @@ Signed-off-by: Biwen Li + tx_c->post_inc -= 1; + } + -+ ld_coe_update(inst); ++ ld_coe_update(xgkr); + goto recheck; + } +#endif + if ((req_cop1 == DECREMENT && status_cop1 == COE_MIN) || + (req_cop1 == INCREMENT && status_cop1 == COE_MAX)) { -+ dev_dbg(&inst->phydev->mdio.dev, "COP1 hit limit %s", ++ dev_dbg(&xgkr->phydev->mdio.dev, "COP1 hit limit %s", + (status_cop1 == COE_MIN) ? + "DEC MIN" : "INC MAX"); + tx_c->long_min_max_cnt++; + if (tx_c->long_min_max_cnt >= TIMEOUT_LONG) { + tx_c->bin_long_stop = true; -+ ld_coe_update(inst); ++ ld_coe_update(xgkr); + goto recheck; + } + } @@ -669,12 +1214,12 @@ Signed-off-by: Biwen Li + + if (status_coz != COE_NOTUPDATED) { + if (req_coz) -+ inst->ld_update &= ~COZ_MASK; ++ xgkr->ld_update &= ~COZ_MASK; + } + + if (status_com1 != COE_NOTUPDATED) { + if (req_com1) { -+ inst->ld_update &= ~COM1_MASK; ++ xgkr->ld_update &= ~COM1_MASK; +#ifdef NEW_ALGORITHM_TRAIN_TX + if (tx_c->pre_inc) { + if (req_com1 == INCREMENT && @@ -683,28 +1228,28 @@ Signed-off-by: Biwen Li + else + tx_c->pre_inc -= 1; + -+ ld_coe_update(inst); ++ ld_coe_update(xgkr); + goto recheck; + } +#endif + /* Stop If we have reached the limit for a parameter. */ + if ((req_com1 == DECREMENT && status_com1 == COE_MIN) || + (req_com1 == INCREMENT && status_com1 == COE_MAX)) { -+ dev_dbg(&inst->phydev->mdio.dev, "COM1 hit limit %s", ++ dev_dbg(&xgkr->phydev->mdio.dev, "COM1 hit limit %s", + (status_com1 == COE_MIN) ? + "DEC MIN" : "INC MAX"); + tx_c->m1_min_max_cnt++; + if (tx_c->m1_min_max_cnt >= TIMEOUT_M1) { + tx_c->bin_m1_stop = true; -+ ld_coe_update(inst); ++ ld_coe_update(xgkr); + goto recheck; + } + } + } + } + -+ if (old_ld_update != inst->ld_update) { -+ ld_coe_update(inst); ++ if (old_ld_update != xgkr->ld_update) { ++ ld_coe_update(xgkr); + /* Redo these status checks and updates until we have no more + * changes, to speed up the overall process. + */ @@ -721,15 +1266,15 @@ Signed-off-by: Biwen Li + return; + +#ifdef NEW_ALGORITHM_TRAIN_TX -+ if (!(inst->ld_update & (PRESET_MASK | INIT_MASK))) { ++ if (!(xgkr->ld_update & (PRESET_MASK | INIT_MASK))) { + if (tx_c->pre_inc) { -+ inst->ld_update = INCREMENT << COM1_SHIFT; -+ ld_coe_update(inst); ++ xgkr->ld_update = INCREMENT << COM1_SHIFT; ++ ld_coe_update(xgkr); + return; + } + + if (status_cop1 != COE_MAX) { -+ median_gaink2 = get_median_gaink2(inst->reg_base); ++ median_gaink2 = xgkr->srds->get_median_gaink2(xgkr->reg_base); + if (median_gaink2 == 0xf) { + tx_c->post_inc = 1; + } else { @@ -746,16 +1291,16 @@ Signed-off-by: Biwen Li + } + + if (tx_c->post_inc) { -+ inst->ld_update = INCREMENT << COP1_SHIFT; -+ ld_coe_update(inst); ++ xgkr->ld_update = INCREMENT << COP1_SHIFT; ++ ld_coe_update(xgkr); + return; + } + } +#endif + + /* snapshot and select bin */ -+ bin_m1_early = is_bin_early(BIN_M1, inst->reg_base); -+ bin_long_early = is_bin_early(BIN_LONG, inst->reg_base); ++ bin_m1_early = xgkr->srds->is_bin_early(BIN_M1, xgkr->reg_base); ++ bin_long_early = xgkr->srds->is_bin_early(BIN_LONG, xgkr->reg_base); + + if (!tx_c->bin_m1_stop && !tx_c->bin_m1_late_early && bin_m1_early) { + tx_c->bin_m1_stop = true; @@ -773,39 +1318,39 @@ Signed-off-by: Biwen Li + * pending. We also only request coefficient updates when the + * corresponding status is NOT UPDATED and nothing is pending. + */ -+ if (!(inst->ld_update & (PRESET_MASK | INIT_MASK))) { ++ if (!(xgkr->ld_update & (PRESET_MASK | INIT_MASK))) { + if (!tx_c->bin_long_stop) { + /* BinM1 correction means changing COM1 */ -+ if (!status_com1 && !(inst->ld_update & COM1_MASK)) { ++ if (!status_com1 && !(xgkr->ld_update & COM1_MASK)) { + /* Avoid BinM1Late by requesting an + * immediate decrement. + */ + if (!bin_m1_early) { + /* request decrement c(-1) */ + temp = DECREMENT << COM1_SHIFT; -+ inst->ld_update = temp; -+ ld_coe_update(inst); ++ xgkr->ld_update = temp; ++ ld_coe_update(xgkr); + tx_c->bin_m1_late_early = bin_m1_early; + return; + } + } + + /* BinLong correction means changing COP1 */ -+ if (!status_cop1 && !(inst->ld_update & COP1_MASK)) { ++ if (!status_cop1 && !(xgkr->ld_update & COP1_MASK)) { + /* Locate BinLong transition point (if any) + * while avoiding BinM1Late. + */ + if (bin_long_early) { + /* request increment c(1) */ + temp = INCREMENT << COP1_SHIFT; -+ inst->ld_update = temp; ++ xgkr->ld_update = temp; + } else { + /* request decrement c(1) */ + temp = DECREMENT << COP1_SHIFT; -+ inst->ld_update = temp; ++ xgkr->ld_update = temp; + } + -+ ld_coe_update(inst); ++ ld_coe_update(xgkr); + tx_c->bin_long_late_early = bin_long_early; + } + /* We try to finish BinLong before we do BinM1 */ @@ -814,19 +1359,19 @@ Signed-off-by: Biwen Li + + if (!tx_c->bin_m1_stop) { + /* BinM1 correction means changing COM1 */ -+ if (!status_com1 && !(inst->ld_update & COM1_MASK)) { ++ if (!status_com1 && !(xgkr->ld_update & COM1_MASK)) { + /* Locate BinM1 transition point (if any) */ + if (bin_m1_early) { + /* request increment c(-1) */ + temp = INCREMENT << COM1_SHIFT; -+ inst->ld_update = temp; ++ xgkr->ld_update = temp; + } else { + /* request decrement c(-1) */ + temp = DECREMENT << COM1_SHIFT; -+ inst->ld_update = temp; ++ xgkr->ld_update = temp; + } + -+ ld_coe_update(inst); ++ ld_coe_update(xgkr); + tx_c->bin_m1_late_early = bin_m1_early; + } + } @@ -835,20 +1380,26 @@ Signed-off-by: Biwen Li + +static int is_link_up(struct phy_device *phydev) +{ -+ int val; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ int val = 0; ++ ++ mutex_lock(&xgkr_inst->phy_lock); + -+ phy_read_mmd(phydev, MDIO_MMD_PCS, FSL_XFI_PCS_10GR_SR1); -+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, FSL_XFI_PCS_10GR_SR1); ++ val = phy_read_mmd(phydev, MDIO_MMD_PCS, XFI_PCS_SR1); + -+ return (val & FSL_KR_RX_LINK_STAT_MASK) ? 1 : 0; ++ mutex_unlock(&xgkr_inst->phy_lock); ++ ++ return (val & KR_RX_LINK_STAT_MASK) ? 1 : 0; +} + -+static int is_link_training_fail(struct phy_device *phydev) ++static int is_link_training_fail(struct xgkr_params *xgkr) +{ ++ struct phy_device *phydev = xgkr->phydev; + int val; + int timeout = 100; + -+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_STATUS); ++ val = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_STATUS); ++ + if (!(val & TRAIN_FAIL) && (val & RX_STAT)) { + /* check LNK_STAT for sure */ + while (timeout--) { @@ -862,18 +1413,18 @@ Signed-off-by: Biwen Li + return 1; +} + -+static int check_rx(struct phy_device *phydev) ++static int check_rx(struct xgkr_params *xgkr) +{ -+ return phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_STATUS) & ++ return xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_STATUS) & + RX_READY_MASK; +} + +/* Coefficient values have hardware restrictions */ -+static int is_ld_valid(struct fsl_xgkr_inst *inst) ++static int is_ld_valid(struct xgkr_params *xgkr) +{ -+ u32 ratio_pst1q = inst->ratio_pst1q; -+ u32 adpt_eq = inst->adpt_eq; -+ u32 ratio_preq = inst->ratio_preq; ++ u32 ratio_pst1q = xgkr->ratio_pst1q; ++ u32 adpt_eq = xgkr->adpt_eq; ++ u32 ratio_preq = xgkr->ratio_preq; + + if ((ratio_pst1q + adpt_eq + ratio_preq) > 48) + return 0; @@ -909,15 +1460,15 @@ Signed-off-by: Biwen Li + } +} + -+static int inc_dec(struct fsl_xgkr_inst *inst, int field, int request) ++static enum coe_update inc_dec(struct xgkr_params *xgkr, int field, int request) +{ + u32 ld_limit[3], ld_coe[3], step[3]; + -+ ld_coe[0] = inst->ratio_pst1q; -+ ld_coe[1] = inst->adpt_eq; -+ ld_coe[2] = inst->ratio_preq; ++ ld_coe[0] = xgkr->ratio_pst1q; ++ ld_coe[1] = xgkr->adpt_eq; ++ ld_coe[2] = xgkr->ratio_preq; + -+ /* Information specific to the Freescale SerDes for 10GBase-KR: ++ /* Information specific to the SerDes for 10GBase-KR: + * Incrementing C(+1) means *decrementing* RATIO_PST1Q + * Incrementing C(0) means incrementing ADPT_EQ + * Incrementing C(-1) means *decrementing* RATIO_PREQ @@ -935,7 +1486,7 @@ Signed-off-by: Biwen Li + ld_coe[field] += step[field]; + else + /* MAX */ -+ return 2; ++ return COE_MAX; + break; + case DECREMENT: + ld_limit[0] = POST_COE_MIN; @@ -945,76 +1496,83 @@ Signed-off-by: Biwen Li + ld_coe[field] -= step[field]; + else + /* MIN */ -+ return 1; ++ return COE_MIN; + break; + default: + break; + } + -+ if (is_ld_valid(inst)) { ++ if (is_ld_valid(xgkr)) { + /* accept new ld */ -+ inst->ratio_pst1q = ld_coe[0]; -+ inst->adpt_eq = ld_coe[1]; -+ inst->ratio_preq = ld_coe[2]; ++ xgkr->ratio_pst1q = ld_coe[0]; ++ xgkr->adpt_eq = ld_coe[1]; ++ xgkr->ratio_preq = ld_coe[2]; + /* only some values for preq and pst1q can be used. + * for preq: 0x0, 0x1, 0x3, 0x5, 0x7, 0x9, 0xb, 0xc. + * for pst1q: 0x0, 0x1, 0x3, 0x5, 0x7, 0x9, 0xb, 0xd, 0xf, 0x10. + */ + if (!is_value_allowed((const u32 *)&preq_table, ld_coe[2])) { -+ dev_dbg(&inst->phydev->mdio.dev, ++ dev_dbg(&xgkr->phydev->mdio.dev, + "preq skipped value: %d\n", ld_coe[2]); -+ return 0; ++ /* NOT UPDATED */ ++ return COE_NOTUPDATED; + } + + if (!is_value_allowed((const u32 *)&pst1q_table, ld_coe[0])) { -+ dev_dbg(&inst->phydev->mdio.dev, ++ dev_dbg(&xgkr->phydev->mdio.dev, + "pst1q skipped value: %d\n", ld_coe[0]); -+ return 0; ++ /* NOT UPDATED */ ++ return COE_NOTUPDATED; + } + -+ tune_tecr0(inst); ++ tune_tecr(xgkr); + } else { + if (request == DECREMENT) + /* MIN */ -+ return 1; ++ return COE_MIN; + if (request == INCREMENT) + /* MAX */ -+ return 2; ++ return COE_MAX; + } + -+ return 0; ++ /* UPDATED */ ++ return COE_UPDATED; +} + -+static void min_max_updated(struct fsl_xgkr_inst *inst, int field, int new_ld) ++static void min_max_updated(struct xgkr_params *xgkr, int field, enum coe_update cs) +{ -+ u32 ld_coe[] = {COE_UPDATED, COE_MIN, COE_MAX}; + u32 mask, val; ++ u32 ld_cs = cs; ++ ++ if (cs == COE_INV) ++ return; + + switch (field) { + case COE_COP1: + mask = COP1_MASK; -+ val = ld_coe[new_ld] << COP1_SHIFT; ++ val = ld_cs << COP1_SHIFT; + break; + case COE_COZ: + mask = COZ_MASK; -+ val = ld_coe[new_ld] << COZ_SHIFT; ++ val = ld_cs << COZ_SHIFT; + break; + case COE_COM: + mask = COM1_MASK; -+ val = ld_coe[new_ld] << COM1_SHIFT; ++ val = ld_cs << COM1_SHIFT; + break; + default: + return; + } + -+ inst->ld_status &= ~mask; -+ inst->ld_status |= val; ++ xgkr->ld_status &= ~mask; ++ xgkr->ld_status |= val; +} + -+static void check_request(struct fsl_xgkr_inst *inst, int request) ++static void check_request(struct xgkr_params *xgkr, int request) +{ + int cop1_req, coz_req, com_req; -+ int old_status, new_ld_sta; ++ int old_status; ++ enum coe_update cu; + + cop1_req = (request & COP1_MASK) >> COP1_SHIFT; + coz_req = (request & COZ_MASK) >> COZ_SHIFT; @@ -1023,65 +1581,51 @@ Signed-off-by: Biwen Li + /* IEEE802.3-2008, 72.6.10.2.5 + * Ensure we only act on INCREMENT/DECREMENT when we are in NOT UPDATED + */ -+ old_status = inst->ld_status; ++ old_status = xgkr->ld_status; + -+ if (cop1_req && !(inst->ld_status & COP1_MASK)) { -+ new_ld_sta = inc_dec(inst, COE_COP1, cop1_req); -+ min_max_updated(inst, COE_COP1, new_ld_sta); ++ if (cop1_req && !(xgkr->ld_status & COP1_MASK)) { ++ cu = inc_dec(xgkr, COE_COP1, cop1_req); ++ min_max_updated(xgkr, COE_COP1, cu); + } + -+ if (coz_req && !(inst->ld_status & COZ_MASK)) { -+ new_ld_sta = inc_dec(inst, COE_COZ, coz_req); -+ min_max_updated(inst, COE_COZ, new_ld_sta); ++ if (coz_req && !(xgkr->ld_status & COZ_MASK)) { ++ cu = inc_dec(xgkr, COE_COZ, coz_req); ++ min_max_updated(xgkr, COE_COZ, cu); + } + -+ if (com_req && !(inst->ld_status & COM1_MASK)) { -+ new_ld_sta = inc_dec(inst, COE_COM, com_req); -+ min_max_updated(inst, COE_COM, new_ld_sta); ++ if (com_req && !(xgkr->ld_status & COM1_MASK)) { ++ cu = inc_dec(xgkr, COE_COM, com_req); ++ min_max_updated(xgkr, COE_COM, cu); + } + -+ if (old_status != inst->ld_status) -+ ld_coe_status(inst); ++ if (old_status != xgkr->ld_status) ++ ld_coe_status(xgkr); +} + -+static void preset(struct fsl_xgkr_inst *inst) ++static void preset(struct xgkr_params *xgkr) +{ + /* These are all MAX values from the IEEE802.3 perspective. */ -+ inst->ratio_pst1q = POST_COE_MAX; -+ inst->adpt_eq = ZERO_COE_MAX; -+ inst->ratio_preq = PRE_COE_MAX; ++ xgkr->ratio_pst1q = POST_COE_MAX; ++ xgkr->adpt_eq = ZERO_COE_MAX; ++ xgkr->ratio_preq = PRE_COE_MAX; + -+ tune_tecr0(inst); -+ inst->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); -+ inst->ld_status |= COE_MAX << COP1_SHIFT | ++ tune_tecr(xgkr); ++ xgkr->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); ++ xgkr->ld_status |= COE_MAX << COP1_SHIFT | + COE_MAX << COZ_SHIFT | + COE_MAX << COM1_SHIFT; -+ ld_coe_status(inst); -+} -+ -+static void initialize(struct fsl_xgkr_inst *inst) -+{ -+ inst->ratio_preq = RATIO_PREQ; -+ inst->ratio_pst1q = RATIO_PST1Q; -+ inst->adpt_eq = RATIO_EQ; -+ -+ tune_tecr0(inst); -+ inst->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); -+ inst->ld_status |= COE_UPDATED << COP1_SHIFT | -+ COE_UPDATED << COZ_SHIFT | -+ COE_UPDATED << COM1_SHIFT; -+ ld_coe_status(inst); ++ ld_coe_status(xgkr); +} + -+static void train_rx(struct fsl_xgkr_inst *inst) ++static void train_local_tx(struct xgkr_params *xgkr) +{ -+ struct phy_device *phydev = inst->phydev; + int request, old_ld_status; + + /* get request from LP */ -+ request = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_CU) & ++ request = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_CU) & + (LD_ALL_MASK); -+ old_ld_status = inst->ld_status; ++ ++ old_ld_status = xgkr->ld_status; + + /* IEEE802.3-2008, 72.6.10.2.5 + * Ensure we always go to NOT UDPATED for status reporting in @@ -1092,69 +1636,87 @@ Signed-off-by: Biwen Li + */ + if (!(request & (PRESET_MASK | INIT_MASK))) { + if (!(request & COP1_MASK)) -+ inst->ld_status &= ~COP1_MASK; ++ xgkr->ld_status &= ~COP1_MASK; + + if (!(request & COZ_MASK)) -+ inst->ld_status &= ~COZ_MASK; ++ xgkr->ld_status &= ~COZ_MASK; + + if (!(request & COM1_MASK)) -+ inst->ld_status &= ~COM1_MASK; ++ xgkr->ld_status &= ~COM1_MASK; + -+ if (old_ld_status != inst->ld_status) -+ ld_coe_status(inst); ++ if (old_ld_status != xgkr->ld_status) ++ ld_coe_status(xgkr); + } + + /* As soon as the LP shows ready, no need to do any more updates. */ -+ if (check_rx(phydev)) { ++ if (check_rx(xgkr)) { + /* LP receiver is ready */ -+ if (inst->ld_status & (COP1_MASK | COZ_MASK | COM1_MASK)) { -+ inst->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); -+ ld_coe_status(inst); ++ if (xgkr->ld_status & (COP1_MASK | COZ_MASK | COM1_MASK)) { ++ xgkr->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); ++ ld_coe_status(xgkr); + } + } else { + /* IEEE802.3-2008, 72.6.10.2.3.1/2 + * only act on PRESET/INITIALIZE if all status is NOT UPDATED. + */ + if (request & (PRESET_MASK | INIT_MASK)) { -+ if (!(inst->ld_status & ++ if (!(xgkr->ld_status & + (COP1_MASK | COZ_MASK | COM1_MASK))) { + if (request & PRESET_MASK) -+ preset(inst); ++ preset(xgkr); + + if (request & INIT_MASK) -+ initialize(inst); ++ initialize(xgkr); + } + } + + /* LP Coefficient are not in HOLD */ + if (request & REQUEST_MASK) -+ check_request(inst, request & REQUEST_MASK); ++ check_request(xgkr, request & REQUEST_MASK); + } +} + -+static void xgkr_start_train(struct phy_device *phydev) ++static void xgkr_start_train(struct xgkr_params *xgkr) +{ -+ struct fsl_xgkr_inst *inst = phydev->priv; -+ struct tx_condition *tx_c = &inst->tx_c; -+ int val = 0, i; ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ struct tx_condition *tx_c = &xgkr->tx_c; ++ int val = 0, i, j; + int lt_state; + unsigned long dead_line; -+ int rx_ok, tx_ok; -+ -+ init_inst(inst, 0); -+ start_lt(phydev); ++ int lp_rx_ready, tx_training_complete; ++ u32 lt_timeout = 500; ++ ++ init_xgkr(xgkr, 0); ++ ++ start_lt(xgkr); ++ ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { ++ lt_timeout = 2000; ++ } + + for (i = 0; i < 2;) { -+ dead_line = jiffies + msecs_to_jiffies(500); ++ ++ dead_line = jiffies + msecs_to_jiffies(lt_timeout); ++ + while (time_before(jiffies, dead_line)) { -+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, -+ FSL_KR_PMD_STATUS); ++ ++ val = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, ++ lt_KR_PMD_STATUS); ++ + if (val & TRAIN_FAIL) { + /* LT failed already, reset lane to avoid + * it run into hanging, then start LT again. + */ -+ reset_gcr0(inst); -+ start_lt(phydev); ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { ++ /* Reset only the Master Lane */ ++ if (xgkr->idx == MASTER_LANE) ++ xgkr->srds->reset_lane(xgkr->reg_base); ++ } else { ++ xgkr->srds->reset_lane(xgkr->reg_base); ++ } ++ ++ start_lt(xgkr); + } else if ((val & PMD_STATUS_SUP_STAT) && + (val & PMD_STATUS_FRAME_LOCK)) + break; @@ -1168,105 +1730,293 @@ Signed-off-by: Biwen Li + } + + /* init process */ -+ rx_ok = false; -+ tx_ok = false; ++ lp_rx_ready = false; ++ tx_training_complete = false; + /* the LT should be finished in 500ms, failed or OK. */ -+ dead_line = jiffies + msecs_to_jiffies(500); ++ dead_line = jiffies + msecs_to_jiffies(lt_timeout); + + while (time_before(jiffies, dead_line)) { + /* check if the LT is already failed */ -+ lt_state = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, -+ FSL_KR_PMD_STATUS); ++ ++ lt_state = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, ++ lt_KR_PMD_STATUS); ++ + if (lt_state & TRAIN_FAIL) { -+ reset_gcr0(inst); ++ ++ if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { ++ /* Reset only the Master Lane */ ++ if (xgkr->idx == MASTER_LANE) ++ xgkr->srds->reset_lane(xgkr->reg_base); ++ } else { ++ xgkr->srds->reset_lane(xgkr->reg_base); ++ } ++ + break; + } + -+ rx_ok = check_rx(phydev); -+ tx_ok = tx_c->tx_complete; ++ lp_rx_ready = check_rx(xgkr); ++ tx_training_complete = tx_c->tx_complete; + -+ if (rx_ok && tx_ok) ++ if (lp_rx_ready && tx_training_complete) + break; + -+ if (!rx_ok) -+ train_rx(inst); ++ if (!lp_rx_ready) ++ train_local_tx(xgkr); + -+ if (!tx_ok) -+ train_tx(inst); ++ if (!tx_training_complete) ++ train_remote_tx(xgkr); + + usleep_range(100, 500); + } + + i++; + /* check LT result */ -+ if (is_link_training_fail(phydev)) { -+ init_inst(inst, 0); ++ if (is_link_training_fail(xgkr)) { ++ init_xgkr(xgkr, 0); + continue; + } else { -+ stop_lt(phydev); -+ inst->state = TRAINED; ++ stop_lt(xgkr); ++ xgkr->state = TRAINED; ++ ++ switch (xgkr_inst->bp_mode) ++ { ++ case PHY_BACKPLANE_10GBASE_KR: ++ if (phydev->attached_dev == NULL) ++ dev_info(&phydev->mdio.dev, "10GBase-KR link trained (Tx equalization: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x)\n", ++ xgkr->tuned_ratio_preq, xgkr->tuned_ratio_pst1q, xgkr->tuned_adpt_eq); ++ else ++ dev_info(&phydev->mdio.dev, "%s %s: 10GBase-KR link trained (Tx equalization: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x)\n", ++ dev_driver_string(phydev->attached_dev->dev.parent), ++ dev_name(phydev->attached_dev->dev.parent), ++ xgkr->tuned_ratio_preq, xgkr->tuned_ratio_pst1q, xgkr->tuned_adpt_eq); ++ break; ++ ++ case PHY_BACKPLANE_40GBASE_KR: ++ if (xgkr->idx == xgkr_inst->phy_lanes - 1) { ++ if (phydev->attached_dev == NULL) ++ dev_info(&phydev->mdio.dev, "40GBase-KR link trained at lanes Tx equalization:\n"); ++ else ++ dev_info(&phydev->mdio.dev, "%s %s: 40GBase-KR link trained at lanes Tx equalization:\n", ++ dev_driver_string(phydev->attached_dev->dev.parent), ++ dev_name(phydev->attached_dev->dev.parent)); ++ ++ for (j = 0; j < xgkr_inst->phy_lanes; j++) { ++ if (phydev->attached_dev == NULL) ++ dev_info(&phydev->mdio.dev, "40GBase-KR Lane %d: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x\n", ++ j, xgkr_inst->xgkr[j].tuned_ratio_preq, xgkr_inst->xgkr[j].tuned_ratio_pst1q, xgkr_inst->xgkr[j].tuned_adpt_eq); ++ else ++ dev_info(&phydev->mdio.dev, "%s %s: 40GBase-KR Lane %d: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x\n", ++ dev_driver_string(phydev->attached_dev->dev.parent), ++ dev_name(phydev->attached_dev->dev.parent), ++ j, xgkr_inst->xgkr[j].tuned_ratio_preq, xgkr_inst->xgkr[j].tuned_ratio_pst1q, xgkr_inst->xgkr[j].tuned_adpt_eq); ++ } ++ } ++ break; ++ } ++ + break; + } + } +} + ++static void xgkr_request_restart_an(struct xgkr_params *xgkr) ++{ ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ int i; ++ ++ if (time_before(jiffies, xgkr->rt_time)) ++ return; ++ ++ switch (xgkr_inst->bp_mode) ++ { ++ case PHY_BACKPLANE_1000BASE_KX: ++ dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); ++ break; ++ ++ case PHY_BACKPLANE_10GBASE_KR: ++ init_xgkr(xgkr, 0); ++ reset_lt(xgkr); ++ xgkr->state = DETECTING_LP; ++ start_xgkr_an(xgkr); ++ start_xgkr_state_machine(&xgkr->xgkr_wk); ++ break; ++ ++ case PHY_BACKPLANE_40GBASE_KR: ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) { ++ init_xgkr(&xgkr_inst->xgkr[i], 0); ++ reset_lt(&xgkr_inst->xgkr[i]); ++ xgkr_inst->xgkr[i].state = DETECTING_LP; ++ } ++ //Start AN only for Master Lane ++ start_xgkr_an(&xgkr_inst->xgkr[MASTER_LANE]); ++ //start state machine ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) { ++ start_xgkr_state_machine(&xgkr_inst->xgkr[i].xgkr_wk); ++ } ++ break; ++ } ++ ++ xgkr->rt_time = jiffies + msecs_to_jiffies(XGKR_DENY_RT_INTERVAL); ++} ++ +static void xgkr_state_machine(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); -+ struct fsl_xgkr_inst *inst = container_of(dwork, -+ struct fsl_xgkr_inst, -+ xgkr_wk); -+ struct phy_device *phydev = inst->phydev; ++ struct xgkr_params *xgkr = container_of(dwork, ++ struct xgkr_params, xgkr_wk); ++ struct phy_device *phydev = xgkr->phydev; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; + int an_state; -+ bool needs_train = false; ++ bool start_train = false; ++ bool all_lanes_trained = false; ++ int i; + -+ mutex_lock(&phydev->lock); ++ if (!xgkr_inst->aneg_done) { ++ start_xgkr_state_machine(&xgkr->xgkr_wk); ++ return; ++ } + -+ switch (inst->state) { ++ mutex_lock(&phydev->lock); ++ ++ switch (xgkr->state) { + case DETECTING_LP: -+ phy_read_mmd(phydev, MDIO_MMD_AN, FSL_AN_BP_STAT); -+ an_state = phy_read_mmd(phydev, MDIO_MMD_AN, FSL_AN_BP_STAT); -+ if ((an_state & KR_AN_MASK)) -+ needs_train = true; ++ ++ switch (xgkr_inst->bp_mode) ++ { ++ case PHY_BACKPLANE_1000BASE_KX: ++ dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); ++ break; ++ ++ case PHY_BACKPLANE_10GBASE_KR: ++ an_state = xgkr_phy_read_mmd(xgkr, MDIO_MMD_AN, g_an_BP_STAT); ++ if (an_state & KR_AN_MASK_10G) { ++ //AN acquired: Train the lane ++ xgkr->an_wait_count = 0; ++ start_train = true; ++ } else { ++ //AN lost or not yet acquired ++ if (!is_link_up(phydev)) { ++ //Link is down: restart training ++ xgkr->an_wait_count = 0; ++ xgkr_request_restart_an(xgkr); ++ } else { ++ //Link is up: wait few iterations for AN to be acquired ++ if (xgkr->an_wait_count >= XGKR_AN_WAIT_ITERATIONS) { ++ xgkr->an_wait_count = 0; ++ xgkr_request_restart_an(xgkr); ++ } else { ++ xgkr->an_wait_count++; ++ } ++ } ++ } ++ break; ++ ++ case PHY_BACKPLANE_40GBASE_KR: ++ //Check AN state only on Master Lane ++ an_state = xgkr_phy_read_mmd(&xgkr_inst->xgkr[MASTER_LANE], MDIO_MMD_AN, g_an_BP_STAT); ++ if (an_state & KR_AN_MASK_40G) { ++ //AN acquired: Train all lanes in order starting with Master Lane ++ xgkr->an_wait_count = 0; ++ if (xgkr->idx == MASTER_LANE) { ++ start_train = true; ++ } ++ else if (xgkr_inst->xgkr[xgkr->idx - 1].state == TRAINED) { ++ start_train = true; ++ } ++ } else { ++ //AN lost or not yet acquired ++ if (!is_link_up(phydev)) { ++ //Link is down: restart training ++ xgkr->an_wait_count = 0; ++ xgkr_request_restart_an(xgkr); ++ } else { ++ //Link is up: wait few iterations for AN to be acquired ++ if (xgkr->an_wait_count >= XGKR_AN_WAIT_ITERATIONS) { ++ xgkr->an_wait_count = 0; ++ xgkr_request_restart_an(xgkr); ++ } else { ++ xgkr->an_wait_count++; ++ } ++ } ++ } ++ break; ++ } + break; ++ + case TRAINED: + if (!is_link_up(phydev)) { -+ dev_info(&phydev->mdio.dev, -+ "Detect hotplug, restart training\n"); -+ init_inst(inst, 1); -+ start_xgkr_an(phydev); -+ inst->state = DETECTING_LP; ++ switch (xgkr_inst->bp_mode) ++ { ++ case PHY_BACKPLANE_1000BASE_KX: ++ dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); ++ break; ++ ++ case PHY_BACKPLANE_10GBASE_KR: ++ dev_info(&phydev->mdio.dev, "Detect hotplug, restart training\n"); ++ xgkr_request_restart_an(xgkr); ++ break; ++ ++ case PHY_BACKPLANE_40GBASE_KR: ++ if (xgkr->idx == MASTER_LANE) { ++ //check if all lanes are trained only on Master Lane ++ all_lanes_trained = true; ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) { ++ if (xgkr_inst->xgkr[i].state != TRAINED) { ++ all_lanes_trained = false; ++ break; ++ } ++ } ++ if (all_lanes_trained) { ++ dev_info(&phydev->mdio.dev, "Detect hotplug, restart training\n"); ++ xgkr_request_restart_an(xgkr); ++ } ++ } ++ break; ++ } + } + break; + } + -+ if (needs_train) -+ xgkr_start_train(phydev); ++ if (start_train) { ++ xgkr_start_train(xgkr); ++ } + + mutex_unlock(&phydev->lock); -+ queue_delayed_work(system_power_efficient_wq, &inst->xgkr_wk, -+ msecs_to_jiffies(XGKR_TIMEOUT)); ++ start_xgkr_state_machine(&xgkr->xgkr_wk); +} + +static int fsl_backplane_probe(struct phy_device *phydev) +{ -+ struct fsl_xgkr_inst *xgkr_inst; ++ struct xgkr_phy_data *xgkr_inst; + struct device_node *phy_node, *lane_node; + struct resource res_lane; ++ struct serdes_access *srds = NULL; ++ int serdes_type; ++ const char *st; + const char *bm; -+ int ret; ++ int ret, i, phy_lanes; + int bp_mode; -+ u32 lane[2]; ++ u32 lane_base_addr[MAX_PHY_LANES_NO], lane_memmap_size; + + phy_node = phydev->mdio.dev.of_node; ++ if (!phy_node) { ++ dev_err(&phydev->mdio.dev, "No associated device tree node\n"); ++ return -EINVAL; ++ } ++ + bp_mode = of_property_read_string(phy_node, "backplane-mode", &bm); + if (bp_mode < 0) -+ return 0; ++ return -EINVAL; + ++ phy_lanes = 1; + if (!strcasecmp(bm, "1000base-kx")) { + bp_mode = PHY_BACKPLANE_1000BASE_KX; + } else if (!strcasecmp(bm, "10gbase-kr")) { + bp_mode = PHY_BACKPLANE_10GBASE_KR; ++ } else if (!strcasecmp(bm, "40gbase-kr")) { ++ bp_mode = PHY_BACKPLANE_40GBASE_KR; ++ phy_lanes = 4; + } else { + dev_err(&phydev->mdio.dev, "Unknown backplane-mode\n"); + return -EINVAL; @@ -1278,6 +2028,20 @@ Signed-off-by: Biwen Li + return -EINVAL; + } + ++ ret = of_property_read_string(lane_node, "compatible", &st); ++ if (ret < 0) { ++ //assume SERDES-10G if compatible property is not specified ++ serdes_type = SERDES_10G; ++ } ++ else if (!strcasecmp(st, "fsl,serdes-10g")) { ++ serdes_type = SERDES_10G; ++ } else if (!strcasecmp(st, "fsl,serdes-28g")) { ++ serdes_type = SERDES_28G; ++ } else { ++ dev_err(&phydev->mdio.dev, "Unknown serdes-type\n"); ++ return -EINVAL; ++ } ++ + ret = of_address_to_resource(lane_node, 0, &res_lane); + if (ret) { + dev_err(&phydev->mdio.dev, "could not obtain memory map\n"); @@ -1286,25 +2050,43 @@ Signed-off-by: Biwen Li + + of_node_put(lane_node); + ret = of_property_read_u32_array(phy_node, "fsl,lane-reg", -+ (u32 *)&lane, 2); ++ (u32 *)lane_base_addr, phy_lanes); + if (ret) { + dev_err(&phydev->mdio.dev, "could not get fsl,lane-reg\n"); + return -EINVAL; + } + -+ phydev->priv = devm_ioremap_nocache(&phydev->mdio.dev, -+ res_lane.start + lane[0], -+ lane[1]); -+ if (!phydev->priv) { -+ dev_err(&phydev->mdio.dev, "ioremap_nocache failed\n"); -+ return -ENOMEM; ++ switch (serdes_type) ++ { ++ case SERDES_10G: ++ setup_an_lt_ls(); ++ srds = setup_serdes_access_10g(); ++ break; ++ ++ case SERDES_28G: ++ setup_an_lt_lx(); ++ srds = setup_serdes_access_28g(); ++ break; ++ ++ default: ++ dev_err(&phydev->mdio.dev, "Unsupported serdes-type\n"); ++ return -EINVAL; + } + -+ if (bp_mode == PHY_BACKPLANE_1000BASE_KX) { -+ phydev->speed = SPEED_1000; -+ /* configure the lane for 1000BASE-KX */ -+ lane_set_1gkx(phydev->priv); -+ return 0; ++ if (!srds) { ++ dev_err(&phydev->mdio.dev, "Unsupported serdes-type\n"); ++ return -EINVAL; ++ } ++ ++ srds->serdes_type = serdes_type; ++ srds->is_little_endian = of_property_read_bool(lane_node, "little-endian"); ++ ++ if (srds->is_little_endian) { ++ srds->ioread32 = le_ioread32; ++ srds->iowrite32 = le_iowrite32; ++ } else { ++ srds->ioread32 = be_ioread32; ++ srds->iowrite32 = be_iowrite32; + } + + xgkr_inst = devm_kzalloc(&phydev->mdio.dev, @@ -1312,13 +2094,46 @@ Signed-off-by: Biwen Li + if (!xgkr_inst) + return -ENOMEM; + -+ xgkr_inst->reg_base = phydev->priv; -+ xgkr_inst->phydev = phydev; ++ xgkr_inst->phy_lanes = phy_lanes; ++ xgkr_inst->bp_mode = bp_mode; ++ mutex_init(&xgkr_inst->phy_lock); ++ ++ lane_memmap_size = srds->get_lane_memmap_size(); ++ ++ for (i = 0; i < phy_lanes; i++) { ++ xgkr_inst->xgkr[i].idx = i; ++ xgkr_inst->xgkr[i].phydev = phydev; ++ xgkr_inst->xgkr[i].srds = srds; ++ xgkr_inst->xgkr[i].reg_base = devm_ioremap_nocache(&phydev->mdio.dev, ++ res_lane.start + lane_base_addr[i], ++ lane_memmap_size); ++ if (!xgkr_inst->xgkr[i].reg_base) { ++ dev_err(&phydev->mdio.dev, "ioremap_nocache failed\n"); ++ return -ENOMEM; ++ } ++ xgkr_inst->xgkr[i].rt_time = jiffies + msecs_to_jiffies(XGKR_DENY_RT_INTERVAL); ++ } ++ + phydev->priv = xgkr_inst; + -+ if (bp_mode == PHY_BACKPLANE_10GBASE_KR) { ++ switch (bp_mode) ++ { ++ case PHY_BACKPLANE_1000BASE_KX: ++ phydev->speed = SPEED_1000; ++ /* configure the lane for 1000BASE-KX */ ++ srds->lane_set_1gkx(xgkr_inst->xgkr[SINGLE_LANE].reg_base); ++ break; ++ ++ case PHY_BACKPLANE_10GBASE_KR: + phydev->speed = SPEED_10000; -+ INIT_DELAYED_WORK(&xgkr_inst->xgkr_wk, xgkr_state_machine); ++ INIT_DELAYED_WORK(&xgkr_inst->xgkr[SINGLE_LANE].xgkr_wk, xgkr_state_machine); ++ break; ++ ++ case PHY_BACKPLANE_40GBASE_KR: ++ phydev->speed = SPEED_40000; ++ for (i = 0; i < phy_lanes; i++) ++ INIT_DELAYED_WORK(&xgkr_inst->xgkr[i].xgkr_wk, xgkr_state_machine); ++ break; + } + + return 0; @@ -1326,20 +2141,59 @@ Signed-off-by: Biwen Li + +static int fsl_backplane_aneg_done(struct phy_device *phydev) +{ ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ ++ if (!phydev->mdio.dev.of_node) { ++ dev_err(&phydev->mdio.dev, "No associated device tree node\n"); ++ return -EINVAL; ++ } ++ ++ xgkr_inst->aneg_done = true; ++ + return 1; +} + +static int fsl_backplane_config_aneg(struct phy_device *phydev) +{ -+ if (phydev->speed == SPEED_10000) { -+ phydev->supported |= SUPPORTED_10000baseKR_Full; -+ start_xgkr_an(phydev); -+ } else if (phydev->speed == SPEED_1000) { -+ phydev->supported |= SUPPORTED_1000baseKX_Full; -+ start_1gkx_an(phydev); ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ int i; ++ ++ if (!phydev->mdio.dev.of_node) { ++ dev_err(&phydev->mdio.dev, "No associated device tree node\n"); ++ return -EINVAL; + } + -+ phydev->advertising = phydev->supported; ++ switch (phydev->speed) ++ { ++ case SPEED_1000: ++ phydev->supported |= SUPPORTED_1000baseKX_Full; ++ start_1gkx_an(phydev); ++ break; ++ ++ case SPEED_10000: ++ phydev->supported |= SUPPORTED_10000baseKR_Full; ++ reset_lt(&xgkr_inst->xgkr[SINGLE_LANE]); ++ start_xgkr_an(&xgkr_inst->xgkr[SINGLE_LANE]); ++ /* start state machine*/ ++ start_xgkr_state_machine(&xgkr_inst->xgkr[SINGLE_LANE].xgkr_wk); ++ break; ++ ++ case SPEED_40000: ++ phydev->supported |= SUPPORTED_40000baseKR4_Full; ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) { ++ reset_lt(&xgkr_inst->xgkr[i]); ++ } ++ //Start AN only for Master Lane ++ start_xgkr_an(&xgkr_inst->xgkr[MASTER_LANE]); ++ /* start state machine*/ ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) { ++ start_xgkr_state_machine(&xgkr_inst->xgkr[i].xgkr_wk); ++ } ++ ++ break; ++ } ++ ++ phydev->advertising = phydev->supported; + phydev->duplex = 1; + + return 0; @@ -1347,29 +2201,48 @@ Signed-off-by: Biwen Li + +static int fsl_backplane_suspend(struct phy_device *phydev) +{ -+ if (phydev->speed == SPEED_10000) { -+ struct fsl_xgkr_inst *xgkr_inst = phydev->priv; ++ int i; ++ ++ if (!phydev->mdio.dev.of_node) { ++ dev_err(&phydev->mdio.dev, "No associated device tree node\n"); ++ return -EINVAL; ++ } + -+ cancel_delayed_work_sync(&xgkr_inst->xgkr_wk); ++ if (phydev->speed == SPEED_10000 || phydev->speed == SPEED_40000) { ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) ++ cancel_delayed_work_sync(&xgkr_inst->xgkr[i].xgkr_wk); + } + return 0; +} + +static int fsl_backplane_resume(struct phy_device *phydev) +{ -+ if (phydev->speed == SPEED_10000) { -+ struct fsl_xgkr_inst *xgkr_inst = phydev->priv; ++ struct xgkr_phy_data *xgkr_inst = phydev->priv; ++ int i; + -+ init_inst(xgkr_inst, 1); -+ queue_delayed_work(system_power_efficient_wq, -+ &xgkr_inst->xgkr_wk, -+ msecs_to_jiffies(XGKR_TIMEOUT)); ++ if (!phydev->mdio.dev.of_node) { ++ dev_err(&phydev->mdio.dev, "No associated device tree node\n"); ++ return -EINVAL; ++ } ++ ++ if (phydev->speed == SPEED_10000 || phydev->speed == SPEED_40000) { ++ for (i = 0; i < xgkr_inst->phy_lanes; i++) { ++ init_xgkr(&xgkr_inst->xgkr[i], 1); ++ start_xgkr_state_machine(&xgkr_inst->xgkr[i].xgkr_wk); ++ } + } + return 0; +} + +static int fsl_backplane_read_status(struct phy_device *phydev) +{ ++ if (!phydev->mdio.dev.of_node) { ++ dev_err(&phydev->mdio.dev, "No associated device tree node\n"); ++ return -EINVAL; ++ } ++ + if (is_link_up(phydev)) + phydev->link = 1; + else @@ -1378,11 +2251,82 @@ Signed-off-by: Biwen Li + return 0; +} + ++static int fsl_backplane_match_phy_device(struct phy_device *phydev) ++{ ++ struct device_node *phy_node, *lane_node; ++ const char *st; ++ int serdes_type, i, ret; ++ const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids); ++ ++ if (!phydev->mdio.dev.of_node) { ++ return 0; ++ } ++ ++ // WORKAROUND: ++ // Required for LX2 devices ++ // where PHY ID cannot be verified in PCS ++ // because PCS Device Identifier Upper and Lower registers are hidden ++ // and always return 0 when they are read: ++ // 2 02 Device_ID0 RO Bits 15:0 0 ++ // val = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x2); ++ // 3 03 Device_ID1 RO Bits 31:16 0 ++ // val = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x3); ++ // ++ // To be removed: After the issue will be fixed on LX2 devices ++ ++ if (!phydev->is_c45) ++ return 0; ++ ++ phy_node = phydev->mdio.dev.of_node; ++ ++ lane_node = of_parse_phandle(phy_node, "fsl,lane-handle", 0); ++ if (!lane_node) { ++ dev_err(&phydev->mdio.dev, "parse fsl,lane-handle failed\n"); ++ return 0; ++ } ++ ++ ret = of_property_read_string(lane_node, "compatible", &st); ++ if (ret < 0) { ++ //assume SERDES-10G if compatible property is not specified ++ serdes_type = SERDES_10G; ++ } ++ else if (!strcasecmp(st, "fsl,serdes-10g")) { ++ serdes_type = SERDES_10G; ++ } else if (!strcasecmp(st, "fsl,serdes-28g")) { ++ serdes_type = SERDES_28G; ++ } else { ++ dev_err(&phydev->mdio.dev, "Unknown serdes-type\n"); ++ return 0; ++ } ++ ++ if (serdes_type == SERDES_10G) { ++ //On LS devices we must find the c45 device with correct PHY ID ++ //Implementation similar with the one existent in phy_device: @function: phy_bus_match ++ for (i = 1; i < num_ids; i++) { ++ if (!(phydev->c45_ids.devices_in_package & (1 << i))) ++ continue; ++ ++ if ((PCS_PHY_DEVICE_ID & PCS_PHY_DEVICE_ID_MASK) == ++ (phydev->c45_ids.device_ids[i] & PCS_PHY_DEVICE_ID_MASK)) ++ { ++ return 1; ++ } ++ } ++ return 0; ++ } ++ ++ //On LX devices we cannot verify PHY ID ++ //so we are happy only with preliminary verifications already made: mdio.dev.of_node and is_c45 ++ //because we already filtered other undesired devices: non clause 45 ++ ++ return 1; ++} ++ +static struct phy_driver fsl_backplane_driver[] = { + { -+ .phy_id = FSL_PCS_PHY_ID, ++ .phy_id = PCS_PHY_DEVICE_ID, + .name = "Freescale Backplane", -+ .phy_id_mask = 0xffffffff, ++ .phy_id_mask = PCS_PHY_DEVICE_ID_MASK, + .features = SUPPORTED_Backplane | SUPPORTED_Autoneg | + SUPPORTED_MII, + .probe = fsl_backplane_probe, @@ -1391,13 +2335,14 @@ Signed-off-by: Biwen Li + .read_status = fsl_backplane_read_status, + .suspend = fsl_backplane_suspend, + .resume = fsl_backplane_resume, ++ .match_phy_device = fsl_backplane_match_phy_device, + }, +}; + +module_phy_driver(fsl_backplane_driver); + +static struct mdio_device_id __maybe_unused freescale_tbl[] = { -+ { FSL_PCS_PHY_ID, 0xffffffff }, ++ { PCS_PHY_DEVICE_ID, PCS_PHY_DEVICE_ID_MASK }, + { } +}; + @@ -1406,6 +2351,1395 @@ Signed-off-by: Biwen Li +MODULE_DESCRIPTION("Freescale Backplane driver"); +MODULE_AUTHOR("Shaohui Xie "); +MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/drivers/net/phy/fsl_backplane.h +@@ -0,0 +1,41 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ ++/* ++ * DPAA backplane driver. ++ * Author: Florinel Iordache ++ * ++ * Copyright 2018 NXP ++ * ++ * Licensed under the GPL-2 or later. ++ */ ++ ++#ifndef FSL_BACKPLANE_H ++#define FSL_BACKPLANE_H ++ ++/* C(-1) */ ++#define BIN_M1 0 ++/* C(1) */ ++#define BIN_LONG 1 ++ ++#define BIN_SNAPSHOT_NUM 5 ++#define BIN_M1_THRESHOLD 3 ++#define BIN_LONG_THRESHOLD 2 ++ ++struct serdes_access { ++ ++ int serdes_type; ++ bool is_little_endian; ++ u32 (*ioread32)(u32 *reg); ++ void (*iowrite32)(u32 value, u32 *reg); ++ u32 (*get_lane_memmap_size)(void); ++ void (*tune_tecr)(void *reg, u32 ratio_preq, u32 ratio_pst1q, u32 adpt_eq, bool reset); ++ void (*reset_lane)(void *reg); ++ void (*lane_set_1gkx)(void *reg); ++ int (*get_median_gaink2)(u32 *reg); ++ bool (*is_bin_early)(int bin_sel, void *reg); ++}; ++ ++struct serdes_access* setup_serdes_access_10g(void); ++struct serdes_access* setup_serdes_access_28g(void); ++ ++ ++#endif //FSL_BACKPLANE_H +--- /dev/null ++++ b/drivers/net/phy/fsl_backplane_serdes_10g.c +@@ -0,0 +1,281 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * DPAA backplane driver for SerDes 10G. ++ * Author: Florinel Iordache ++ * ++ * Copyright 2018 NXP ++ * ++ * Licensed under the GPL-2 or later. ++ */ ++ ++#include ++#include ++ ++#include "fsl_backplane.h" ++ ++#define BIN_M1_SEL 6 ++#define BIN_Long_SEL 7 ++#define CDR_SEL_MASK 0x00070000 ++ ++#define PRE_COE_SHIFT 22 ++#define POST_COE_SHIFT 16 ++#define ZERO_COE_SHIFT 8 ++ ++#define TECR0_INIT 0x24200000 ++ ++#define GCR0_RESET_MASK 0x00600000 ++ ++#define GCR1_SNP_START_MASK 0x00000040 ++#define GCR1_CTL_SNP_START_MASK 0x00002000 ++ ++#define RECR1_CTL_SNP_DONE_MASK 0x00000002 ++#define RECR1_SNP_DONE_MASK 0x00000004 ++#define TCSR1_SNP_DATA_MASK 0x0000ffc0 ++#define TCSR1_SNP_DATA_SHIFT 6 ++#define TCSR1_EQ_SNPBIN_SIGN_MASK 0x100 ++ ++#define RECR1_GAINK2_MASK 0x0f000000 ++#define RECR1_GAINK2_SHIFT 24 ++ ++/* Required only for 1000BASE KX */ ++#define GCR1_REIDL_TH_MASK 0x00700000 ++#define GCR1_REIDL_EX_SEL_MASK 0x000c0000 ++#define GCR1_REIDL_ET_MAS_MASK 0x00004000 ++#define TECR0_AMP_RED_MASK 0x0000003f ++ ++struct per_lane_ctrl_status { ++ u32 gcr0; /* 0x.000 - General Control Register 0 */ ++ u32 gcr1; /* 0x.004 - General Control Register 1 */ ++ u32 gcr2; /* 0x.008 - General Control Register 2 */ ++ u32 resv1; /* 0x.00C - Reserved */ ++ u32 recr0; /* 0x.010 - Receive Equalization Control Register 0 */ ++ u32 recr1; /* 0x.014 - Receive Equalization Control Register 1 */ ++ u32 tecr0; /* 0x.018 - Transmit Equalization Control Register 0 */ ++ u32 resv2; /* 0x.01C - Reserved */ ++ u32 tlcr0; /* 0x.020 - TTL Control Register 0 */ ++ u32 tlcr1; /* 0x.024 - TTL Control Register 1 */ ++ u32 tlcr2; /* 0x.028 - TTL Control Register 2 */ ++ u32 tlcr3; /* 0x.02C - TTL Control Register 3 */ ++ u32 tcsr0; /* 0x.030 - Test Control/Status Register 0 */ ++ u32 tcsr1; /* 0x.034 - Test Control/Status Register 1 */ ++ u32 tcsr2; /* 0x.038 - Test Control/Status Register 2 */ ++ u32 tcsr3; /* 0x.03C - Test Control/Status Register 3 */ ++}; ++ ++static struct serdes_access srds; ++ ++static u32 get_lane_memmap_size(void) ++{ ++ return 0x40; ++} ++ ++static void reset_lane(void *reg) ++{ ++ struct per_lane_ctrl_status *reg_base = reg; ++ ++ /* reset the lane */ ++ srds.iowrite32(srds.ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, ++ ®_base->gcr0); ++ udelay(1); ++ ++ /* unreset the lane */ ++ srds.iowrite32(srds.ioread32(®_base->gcr0) | GCR0_RESET_MASK, ++ ®_base->gcr0); ++ udelay(1); ++} ++ ++static void tune_tecr(void *reg, u32 ratio_preq, u32 ratio_pst1q, u32 adpt_eq, bool reset) ++{ ++ struct per_lane_ctrl_status *reg_base = reg; ++ u32 val; ++ ++ val = TECR0_INIT | ++ adpt_eq << ZERO_COE_SHIFT | ++ ratio_preq << PRE_COE_SHIFT | ++ ratio_pst1q << POST_COE_SHIFT; ++ ++ if (reset) { ++ /* reset the lane */ ++ srds.iowrite32(srds.ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, ++ ®_base->gcr0); ++ udelay(1); ++ } ++ ++ srds.iowrite32(val, ®_base->tecr0); ++ udelay(1); ++ ++ if (reset) { ++ /* unreset the lane */ ++ srds.iowrite32(srds.ioread32(®_base->gcr0) | GCR0_RESET_MASK, ++ ®_base->gcr0); ++ udelay(1); ++ } ++} ++ ++static void lane_set_1gkx(void *reg) ++{ ++ struct per_lane_ctrl_status *reg_base = reg; ++ u32 val; ++ ++ /* reset the lane */ ++ srds.iowrite32(srds.ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, ++ ®_base->gcr0); ++ udelay(1); ++ ++ /* set gcr1 for 1GKX */ ++ val = srds.ioread32(®_base->gcr1); ++ val &= ~(GCR1_REIDL_TH_MASK | GCR1_REIDL_EX_SEL_MASK | ++ GCR1_REIDL_ET_MAS_MASK); ++ srds.iowrite32(val, ®_base->gcr1); ++ udelay(1); ++ ++ /* set tecr0 for 1GKX */ ++ val = srds.ioread32(®_base->tecr0); ++ val &= ~TECR0_AMP_RED_MASK; ++ srds.iowrite32(val, ®_base->tecr0); ++ udelay(1); ++ ++ /* unreset the lane */ ++ srds.iowrite32(srds.ioread32(®_base->gcr0) | GCR0_RESET_MASK, ++ ®_base->gcr0); ++ udelay(1); ++} ++ ++static int get_median_gaink2(u32 *reg) ++{ ++ int gaink2_snap_shot[BIN_SNAPSHOT_NUM]; ++ u32 rx_eq_snp; ++ struct per_lane_ctrl_status *reg_base; ++ int timeout; ++ int i, j, tmp, pos; ++ ++ reg_base = (struct per_lane_ctrl_status *)reg; ++ ++ for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { ++ /* wait RECR1_CTL_SNP_DONE_MASK has cleared */ ++ timeout = 100; ++ while (srds.ioread32(®_base->recr1) & ++ RECR1_CTL_SNP_DONE_MASK) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* start snap shot */ ++ srds.iowrite32((srds.ioread32(®_base->gcr1) | ++ GCR1_CTL_SNP_START_MASK), ++ ®_base->gcr1); ++ ++ /* wait for SNP done */ ++ timeout = 100; ++ while (!(srds.ioread32(®_base->recr1) & ++ RECR1_CTL_SNP_DONE_MASK)) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* read and save the snap shot */ ++ rx_eq_snp = srds.ioread32(®_base->recr1); ++ gaink2_snap_shot[i] = (rx_eq_snp & RECR1_GAINK2_MASK) >> ++ RECR1_GAINK2_SHIFT; ++ ++ /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ ++ srds.iowrite32((srds.ioread32(®_base->gcr1) & ++ ~GCR1_CTL_SNP_START_MASK), ++ ®_base->gcr1); ++ } ++ ++ /* get median of the 5 snap shot */ ++ for (i = 0; i < BIN_SNAPSHOT_NUM - 1; i++) { ++ tmp = gaink2_snap_shot[i]; ++ pos = i; ++ for (j = i + 1; j < BIN_SNAPSHOT_NUM; j++) { ++ if (gaink2_snap_shot[j] < tmp) { ++ tmp = gaink2_snap_shot[j]; ++ pos = j; ++ } ++ } ++ ++ gaink2_snap_shot[pos] = gaink2_snap_shot[i]; ++ gaink2_snap_shot[i] = tmp; ++ } ++ ++ return gaink2_snap_shot[2]; ++} ++ ++static bool is_bin_early(int bin_sel, void *reg) ++{ ++ bool early = false; ++ int bin_snap_shot[BIN_SNAPSHOT_NUM]; ++ int i, negative_count = 0; ++ struct per_lane_ctrl_status *reg_base = reg; ++ int timeout; ++ ++ for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { ++ /* wait RECR1_SNP_DONE_MASK has cleared */ ++ timeout = 100; ++ while ((srds.ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* set TCSR1[CDR_SEL] to BinM1/BinLong */ ++ if (bin_sel == BIN_M1) { ++ srds.iowrite32((srds.ioread32(®_base->tcsr1) & ++ ~CDR_SEL_MASK) | BIN_M1_SEL, ++ ®_base->tcsr1); ++ } else { ++ srds.iowrite32((srds.ioread32(®_base->tcsr1) & ++ ~CDR_SEL_MASK) | BIN_Long_SEL, ++ ®_base->tcsr1); ++ } ++ ++ /* start snap shot */ ++ srds.iowrite32(srds.ioread32(®_base->gcr1) | GCR1_SNP_START_MASK, ++ ®_base->gcr1); ++ ++ /* wait for SNP done */ ++ timeout = 100; ++ while (!(srds.ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* read and save the snap shot */ ++ bin_snap_shot[i] = (srds.ioread32(®_base->tcsr1) & ++ TCSR1_SNP_DATA_MASK) >> TCSR1_SNP_DATA_SHIFT; ++ if (bin_snap_shot[i] & TCSR1_EQ_SNPBIN_SIGN_MASK) ++ negative_count++; ++ ++ /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ ++ srds.iowrite32(srds.ioread32(®_base->gcr1) & ~GCR1_SNP_START_MASK, ++ ®_base->gcr1); ++ } ++ ++ if (((bin_sel == BIN_M1) && (negative_count > BIN_M1_THRESHOLD)) || ++ ((bin_sel == BIN_LONG && (negative_count > BIN_LONG_THRESHOLD)))) { ++ early = true; ++ } ++ ++ return early; ++} ++ ++struct serdes_access* setup_serdes_access_10g(void) ++{ ++ srds.get_lane_memmap_size = get_lane_memmap_size; ++ srds.tune_tecr = tune_tecr; ++ srds.reset_lane = reset_lane; ++ srds.lane_set_1gkx = lane_set_1gkx; ++ srds.get_median_gaink2 = get_median_gaink2; ++ srds.is_bin_early = is_bin_early; ++ ++ return &srds; ++} ++ +--- /dev/null ++++ b/drivers/net/phy/fsl_backplane_serdes_28g.c +@@ -0,0 +1,336 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * DPAA backplane driver for SerDes 28G. ++ * Author: Florinel Iordache ++ * ++ * Copyright 2018 NXP ++ * ++ * Licensed under the GPL-2 or later. ++ */ ++ ++#include ++#include ++#include ++ ++#include "fsl_backplane.h" ++ ++#define BIN_M1_SEL 0x0000c000 ++#define BIN_Long_SEL 0x0000d000 ++#define CDR_SEL_MASK 0x0000f000 ++ ++#define PRE_COE_SHIFT 16 ++#define POST_COE_SHIFT 8 ++#define ZERO_COE_SHIFT 24 ++ ++#define TECR0_INIT 0x20808000 ++ ++#define RESET_REQ_MASK 0x80000000 ++ ++#define RECR3_SNP_START_MASK 0x80000000 ++#define RECR3_SNP_DONE_MASK 0x40000000 ++ ++#define RECR4_SNP_DATA_MASK 0x000003ff ++#define RECR4_SNP_DATA_SHIFT 0 ++#define RECR4_EQ_SNPBIN_SIGN_MASK 0x200 ++ ++#define RECR3_GAINK2_MASK 0x1f000000 ++#define RECR3_GAINK2_SHIFT 24 ++ ++/* Required only for 1000BASE KX */ ++#define GCR1_REIDL_TH_MASK 0x00700000 ++#define GCR1_REIDL_EX_SEL_MASK 0x000c0000 ++#define GCR1_REIDL_ET_MAS_MASK 0x04000000 ++#define TECR0_AMP_RED_MASK 0x0000003f ++ ++struct per_lane_ctrl_status { ++ u32 gcr0; /* 0x.000 - General Control Register 0 */ ++ u32 resv1; /* 0x.004 - Reserved */ ++ u32 resv2; /* 0x.008 - Reserved */ ++ u32 resv3; /* 0x.00C - Reserved */ ++ u32 resv4; /* 0x.010 - Reserved */ ++ u32 resv5; /* 0x.014 - Reserved */ ++ u32 resv6; /* 0x.018 - Reserved */ ++ u32 resv7; /* 0x.01C - Reserved */ ++ u32 trstctl; /* 0x.020 - TX Reset Control Register */ ++ u32 tgcr0; /* 0x.024 - TX General Control Register 0 */ ++ u32 tgcr1; /* 0x.028 - TX General Control Register 1 */ ++ u32 tgcr2; /* 0x.02C - TX General Control Register 2 */ ++ u32 tecr0; /* 0x.030 - Transmit Equalization Control Register 0 */ ++ u32 tecr1; /* 0x.034 - Transmit Equalization Control Register 1 */ ++ u32 resv8; /* 0x.038 - Reserved */ ++ u32 resv9; /* 0x.03C - Reserved */ ++ u32 rrstctl; /* 0x.040 - RX Reset Control Register */ ++ u32 rgcr0; /* 0x.044 - RX General Control Register 0 */ ++ u32 rxgcr1; /* 0x.048 - RX General Control Register 1 */ ++ u32 resv10; /* 0x.04C - Reserved */ ++ u32 recr0; /* 0x.050 - RX Equalization Register 0 */ ++ u32 recr1; /* 0x.054 - RX Equalization Register 1 */ ++ u32 recr2; /* 0x.058 - RX Equalization Register 2 */ ++ u32 recr3; /* 0x.05C - RX Equalization Register 3 */ ++ u32 recr4; /* 0x.060 - RX Equalization Register 4 */ ++ u32 resv11; /* 0x.064 - Reserved */ ++ u32 rccr0; /* 0x.068 - RX Calibration Register 0 */ ++ u32 rccr1; /* 0x.06C - RX Calibration Register 1 */ ++ u32 rcpcr0; /* 0x.070 - RX Clock Path Register 0 */ ++ u32 rsccr0; /* 0x.074 - RX Sampler Calibration Control Register 0 */ ++ u32 rsccr1; /* 0x.078 - RX Sampler Calibration Control Register 1 */ ++ u32 resv12; /* 0x.07C - Reserved */ ++ u32 ttlcr0; /* 0x.080 - Transition Tracking Loop Register 0 */ ++ u32 ttlcr1; /* 0x.084 - Transition Tracking Loop Register 1 */ ++ u32 ttlcr2; /* 0x.088 - Transition Tracking Loop Register 2 */ ++ u32 ttlcr3; /* 0x.08C - Transition Tracking Loop Register 3 */ ++ u32 resv13; /* 0x.090 - Reserved */ ++ u32 resv14; /* 0x.094 - Reserved */ ++ u32 resv15; /* 0x.098 - Reserved */ ++ u32 resv16; /* 0x.09C - Reserved */ ++ u32 tcsr0; /* 0x.0A0 - Test Control/Status Register 0 */ ++ u32 tcsr1; /* 0x.0A4 - Test Control/Status Register 1 */ ++ u32 tcsr2; /* 0x.0A8 - Test Control/Status Register 2 */ ++ u32 tcsr3; /* 0x.0AC - Test Control/Status Register 3 */ ++ u32 tcsr4; /* 0x.0B0 - Test Control/Status Register 4 */ ++ u32 resv17; /* 0x.0B4 - Reserved */ ++ u32 resv18; /* 0x.0B8 - Reserved */ ++ u32 resv19; /* 0x.0BC - Reserved */ ++ u32 rxcb0; /* 0x.0C0 - RX Control Block Register 0 */ ++ u32 rxcb1; /* 0x.0C4 - RX Control Block Register 1 */ ++ u32 resv20; /* 0x.0C8 - Reserved */ ++ u32 resv21; /* 0x.0CC - Reserved */ ++ u32 rxss0; /* 0x.0D0 - RX Speed Switch Register 0 */ ++ u32 rxss1; /* 0x.0D4 - RX Speed Switch Register 1 */ ++ u32 rxss2; /* 0x.0D8 - RX Speed Switch Register 2 */ ++ u32 resv22; /* 0x.0DC - Reserved */ ++ u32 txcb0; /* 0x.0E0 - TX Control Block Register 0 */ ++ u32 txcb1; /* 0x.0E4 - TX Control Block Register 1 */ ++ u32 resv23; /* 0x.0E8 - Reserved */ ++ u32 resv24; /* 0x.0EC - Reserved */ ++ u32 txss0; /* 0x.0F0 - TX Speed Switch Register 0 */ ++ u32 txss1; /* 0x.0F4 - TX Speed Switch Register 1 */ ++ u32 txss2; /* 0x.0F8 - TX Speed Switch Register 2 */ ++ u32 resv25; /* 0x.0FC - Reserved */ ++}; ++ ++static struct serdes_access srds; ++ ++static u32 get_lane_memmap_size(void) ++{ ++ return 0x100; ++} ++ ++static void reset_lane(void *reg) ++{ ++ struct per_lane_ctrl_status *reg_base = reg; ++ u32 val; ++ unsigned long timeout; ++ ++ /* reset Tx lane: send reset request */ ++ srds.iowrite32(srds.ioread32(®_base->trstctl) | RESET_REQ_MASK, ++ ®_base->trstctl); ++ udelay(1); ++ timeout = 10; ++ while (timeout--) { ++ val = srds.ioread32(®_base->trstctl); ++ if (!(val & RESET_REQ_MASK)) ++ break; ++ usleep_range(5, 20); ++ } ++ ++ /* reset Rx lane: send reset request */ ++ srds.iowrite32(srds.ioread32(®_base->rrstctl) | RESET_REQ_MASK, ++ ®_base->rrstctl); ++ udelay(1); ++ timeout = 10; ++ while (timeout--) { ++ val = srds.ioread32(®_base->rrstctl); ++ if (!(val & RESET_REQ_MASK)) ++ break; ++ usleep_range(5, 20); ++ } ++ ++ /* wait for a while after reset */ ++ timeout = jiffies + 10; ++ while (time_before(jiffies, timeout)) { ++ schedule(); ++ usleep_range(5, 20); ++ } ++} ++ ++static void tune_tecr(void *reg, u32 ratio_preq, u32 ratio_pst1q, u32 adpt_eq, bool reset) ++{ ++ struct per_lane_ctrl_status *reg_base = reg; ++ u32 val; ++ ++ if (reset) { ++ /* reset lanes */ ++ reset_lane(reg); ++ } ++ ++ val = TECR0_INIT | ++ ratio_preq << PRE_COE_SHIFT | ++ ratio_pst1q << POST_COE_SHIFT; ++ srds.iowrite32(val, ®_base->tecr0); ++ ++ val = adpt_eq << ZERO_COE_SHIFT; ++ srds.iowrite32(val, ®_base->tecr1); ++ ++ udelay(1); ++} ++ ++static void lane_set_1gkx(void *reg) ++{ ++ struct per_lane_ctrl_status *reg_base = reg; ++ u32 val; ++ ++ /* reset lanes */ ++ reset_lane(reg); ++ ++ /* set gcr1 for 1GKX */ ++ val = srds.ioread32(®_base->rxgcr1); ++ val &= ~(GCR1_REIDL_TH_MASK | GCR1_REIDL_EX_SEL_MASK | ++ GCR1_REIDL_ET_MAS_MASK); ++ srds.iowrite32(val, ®_base->rxgcr1); ++ udelay(1); ++ ++ /* set tecr0 for 1GKX */ ++ val = srds.ioread32(®_base->tecr0); ++ val &= ~TECR0_AMP_RED_MASK; ++ srds.iowrite32(val, ®_base->tecr0); ++ udelay(1); ++} ++ ++static int get_median_gaink2(u32 *reg) ++{ ++ int gaink2_snap_shot[BIN_SNAPSHOT_NUM]; ++ u32 rx_eq_snp; ++ struct per_lane_ctrl_status *reg_base; ++ int timeout; ++ int i, j, tmp, pos; ++ ++ reg_base = (struct per_lane_ctrl_status *)reg; ++ ++ for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { ++ /* wait RECR3_SNP_DONE_MASK has cleared */ ++ timeout = 100; ++ while (srds.ioread32(®_base->recr3) & ++ RECR3_SNP_DONE_MASK) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* start snap shot */ ++ srds.iowrite32((srds.ioread32(®_base->recr3) | ++ RECR3_SNP_START_MASK), ++ ®_base->recr3); ++ ++ /* wait for SNP done */ ++ timeout = 100; ++ while (!(srds.ioread32(®_base->recr3) & ++ RECR3_SNP_DONE_MASK)) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* read and save the snap shot */ ++ rx_eq_snp = srds.ioread32(®_base->recr3); ++ gaink2_snap_shot[i] = (rx_eq_snp & RECR3_GAINK2_MASK) >> ++ RECR3_GAINK2_SHIFT; ++ ++ /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ ++ srds.iowrite32((srds.ioread32(®_base->recr3) & ++ ~RECR3_SNP_START_MASK), ++ ®_base->recr3); ++ } ++ ++ /* get median of the 5 snap shot */ ++ for (i = 0; i < BIN_SNAPSHOT_NUM - 1; i++) { ++ tmp = gaink2_snap_shot[i]; ++ pos = i; ++ for (j = i + 1; j < BIN_SNAPSHOT_NUM; j++) { ++ if (gaink2_snap_shot[j] < tmp) { ++ tmp = gaink2_snap_shot[j]; ++ pos = j; ++ } ++ } ++ ++ gaink2_snap_shot[pos] = gaink2_snap_shot[i]; ++ gaink2_snap_shot[i] = tmp; ++ } ++ ++ return gaink2_snap_shot[2]; ++} ++ ++static bool is_bin_early(int bin_sel, void *reg) ++{ ++ bool early = false; ++ int bin_snap_shot[BIN_SNAPSHOT_NUM]; ++ int i, negative_count = 0; ++ struct per_lane_ctrl_status *reg_base = reg; ++ int timeout; ++ ++ for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { ++ /* wait RECR3_SNP_DONE_MASK has cleared */ ++ timeout = 100; ++ while ((srds.ioread32(®_base->recr3) & RECR3_SNP_DONE_MASK)) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* set TCSR1[CDR_SEL] to BinM1/BinLong */ ++ if (bin_sel == BIN_M1) { ++ srds.iowrite32((srds.ioread32(®_base->recr4) & ++ ~CDR_SEL_MASK) | BIN_M1_SEL, ++ ®_base->recr4); ++ } else { ++ srds.iowrite32((srds.ioread32(®_base->recr4) & ++ ~CDR_SEL_MASK) | BIN_Long_SEL, ++ ®_base->recr4); ++ } ++ ++ /* start snap shot */ ++ srds.iowrite32(srds.ioread32(®_base->recr3) | RECR3_SNP_START_MASK, ++ ®_base->recr3); ++ ++ /* wait for SNP done */ ++ timeout = 100; ++ while (!(srds.ioread32(®_base->recr3) & RECR3_SNP_DONE_MASK)) { ++ udelay(1); ++ timeout--; ++ if (timeout == 0) ++ break; ++ } ++ ++ /* read and save the snap shot */ ++ bin_snap_shot[i] = (srds.ioread32(®_base->recr4) & ++ RECR4_SNP_DATA_MASK) >> RECR4_SNP_DATA_SHIFT; ++ if (bin_snap_shot[i] & RECR4_EQ_SNPBIN_SIGN_MASK) ++ negative_count++; ++ ++ /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ ++ srds.iowrite32(srds.ioread32(®_base->recr3) & ~RECR3_SNP_START_MASK, ++ ®_base->recr3); ++ } ++ ++ if (((bin_sel == BIN_M1) && (negative_count > BIN_M1_THRESHOLD)) || ++ ((bin_sel == BIN_LONG && (negative_count > BIN_LONG_THRESHOLD)))) { ++ early = true; ++ } ++ ++ return early; ++} ++ ++struct serdes_access* setup_serdes_access_28g(void) ++{ ++ srds.get_lane_memmap_size = get_lane_memmap_size; ++ srds.tune_tecr = tune_tecr; ++ srds.reset_lane = reset_lane; ++ srds.lane_set_1gkx = lane_set_1gkx; ++ srds.get_median_gaink2 = get_median_gaink2; ++ srds.is_bin_early = is_bin_early; ++ ++ return &srds; ++} +--- /dev/null ++++ b/drivers/net/phy/inphi.c +@@ -0,0 +1,594 @@ ++/* ++ * Copyright 2018 NXP ++ * Copyright 2018 INPHI ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * 1. Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright notice, ++ * this list of conditions and the following disclaimer in the documentation ++ * and/or other materials provided with the distribution. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ * ++ * Inphi is a registered trademark of Inphi Corporation ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define PHY_ID_IN112525 0x02107440 ++ ++#define INPHI_S03_DEVICE_ID_MSB 0x2 ++#define INPHI_S03_DEVICE_ID_LSB 0x3 ++ ++#define ALL_LANES 4 ++#define INPHI_POLL_DELAY 2500 ++ ++#define PHYCTRL_REG1 0x0012 ++#define PHYCTRL_REG2 0x0014 ++#define PHYCTRL_REG3 0x0120 ++#define PHYCTRL_REG4 0x0121 ++#define PHYCTRL_REG5 0x0180 ++#define PHYCTRL_REG6 0x0580 ++#define PHYCTRL_REG7 0x05C4 ++#define PHYCTRL_REG8 0x01C8 ++#define PHYCTRL_REG9 0x0521 ++ ++#define PHYSTAT_REG1 0x0021 ++#define PHYSTAT_REG2 0x0022 ++#define PHYSTAT_REG3 0x0123 ++ ++#define PHYMISC_REG1 0x0025 ++#define PHYMISC_REG2 0x002c ++#define PHYMISC_REG3 0x00b3 ++#define PHYMISC_REG4 0x0181 ++#define PHYMISC_REG5 0x019D ++#define PHYMISC_REG6 0x0198 ++#define PHYMISC_REG7 0x0199 ++#define PHYMISC_REG8 0x0581 ++#define PHYMISC_REG9 0x0598 ++#define PHYMISC_REG10 0x059c ++#define PHYMISC_REG20 0x01B0 ++#define PHYMISC_REG21 0x01BC ++#define PHYMISC_REG22 0x01C0 ++ ++#define RX_VCO_CODE_OFFSET 5 ++#define VCO_CODE 390 ++ ++int vco_codes[ALL_LANES] = { ++ VCO_CODE, ++ VCO_CODE, ++ VCO_CODE, ++ VCO_CODE ++}; ++ ++static void mykmod_work_handler(struct work_struct *w); ++ ++static struct workqueue_struct *wq; ++static DECLARE_DELAYED_WORK(mykmod_work, mykmod_work_handler); ++static unsigned long onesec; ++struct phy_device *inphi_phydev; ++ ++static int mdio_wr(u32 regnum, u16 val) ++{ ++ regnum = MII_ADDR_C45 | (MDIO_MMD_VEND1 << 16) | (regnum & 0xffff); ++ ++ return mdiobus_write(inphi_phydev->mdio.bus, inphi_phydev->mdio.addr, ++ regnum, val); ++} ++ ++static int mdio_rd(u32 regnum) ++{ ++ regnum = MII_ADDR_C45 | (MDIO_MMD_VEND1 << 16) | (regnum & 0xffff); ++ ++ return mdiobus_read(inphi_phydev->mdio.bus, inphi_phydev->mdio.addr, ++ regnum); ++} ++ ++ ++int bit_test(int value, int bit_field) ++{ ++ int result; ++ int bit_mask = (1 << bit_field); ++ ++ result = ((value & bit_mask) == bit_mask); ++ return result; ++} ++ ++int tx_pll_lock_test(int lane) ++{ ++ int i, val, locked = 1; ++ ++ if (lane == ALL_LANES) { ++ for (i = 0; i < ALL_LANES; i++) { ++ val = mdio_rd(i * 0x100 + PHYSTAT_REG3); ++ locked = locked & bit_test(val, 15); ++ } ++ } else { ++ val = mdio_rd(lane * 0x100 + PHYSTAT_REG3); ++ locked = locked & bit_test(val, 15); ++ } ++ ++ return locked; ++} ++ ++void rx_reset_assert(int lane) ++{ ++ int mask, val; ++ ++ if (lane == ALL_LANES) { ++ val = mdio_rd(PHYMISC_REG2); ++ mask = (1 << 15); ++ mdio_wr(PHYMISC_REG2, val + mask); ++ } else { ++ val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); ++ mask = (1 << 6); ++ mdio_wr(lane * 0x100 + PHYCTRL_REG8, val + mask); ++ } ++} ++ ++void rx_reset_de_assert(int lane) ++{ ++ int mask, val; ++ ++ if (lane == ALL_LANES) { ++ val = mdio_rd(PHYMISC_REG2); ++ mask = 0xffff - (1 << 15); ++ mdio_wr(PHYMISC_REG2, val & mask); ++ } else { ++ val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); ++ mask = 0xffff - (1 << 6); ++ mdio_wr(lane * 0x100 + PHYCTRL_REG8, val & mask); ++ } ++} ++ ++void rx_powerdown_assert(int lane) ++{ ++ int mask, val; ++ ++ val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); ++ mask = (1 << 5); ++ mdio_wr(lane * 0x100 + PHYCTRL_REG8, val + mask); ++} ++ ++void rx_powerdown_de_assert(int lane) ++{ ++ int mask, val; ++ ++ val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); ++ mask = 0xffff - (1 << 5); ++ mdio_wr(lane * 0x100 + PHYCTRL_REG8, val & mask); ++} ++ ++void tx_pll_assert(int lane) ++{ ++ int val, recal; ++ ++ if (lane == ALL_LANES) { ++ val = mdio_rd(PHYMISC_REG2); ++ recal = (1 << 12); ++ mdio_wr(PHYMISC_REG2, val | recal); ++ } else { ++ val = mdio_rd(lane * 0x100 + PHYCTRL_REG4); ++ recal = (1 << 15); ++ mdio_wr(lane * 0x100 + PHYCTRL_REG4, val | recal); ++ } ++} ++ ++void tx_pll_de_assert(int lane) ++{ ++ int recal, val; ++ ++ if (lane == ALL_LANES) { ++ val = mdio_rd(PHYMISC_REG2); ++ recal = 0xefff; ++ mdio_wr(PHYMISC_REG2, val & recal); ++ } else { ++ val = mdio_rd(lane * 0x100 + PHYCTRL_REG4); ++ recal = 0x7fff; ++ mdio_wr(lane * 0x100 + PHYCTRL_REG4, val & recal); ++ } ++} ++ ++void tx_core_assert(int lane) ++{ ++ int recal, val, val2, core_reset; ++ ++ if (lane == 4) { ++ val = mdio_rd(PHYMISC_REG2); ++ recal = 1 << 10; ++ mdio_wr(PHYMISC_REG2, val | recal); ++ } else { ++ val2 = mdio_rd(PHYMISC_REG3); ++ core_reset = (1 << (lane + 8)); ++ mdio_wr(PHYMISC_REG3, val2 | core_reset); ++ } ++} ++ ++void lol_disable(int lane) ++{ ++ int val, mask; ++ ++ val = mdio_rd(PHYMISC_REG3); ++ mask = 1 << (lane + 4); ++ mdio_wr(PHYMISC_REG3, val | mask); ++} ++ ++void tx_core_de_assert(int lane) ++{ ++ int val, recal, val2, core_reset; ++ ++ if (lane == ALL_LANES) { ++ val = mdio_rd(PHYMISC_REG2); ++ recal = 0xffff - (1 << 10); ++ mdio_wr(PHYMISC_REG2, val & recal); ++ } else { ++ val2 = mdio_rd(PHYMISC_REG3); ++ core_reset = 0xffff - (1 << (lane + 8)); ++ mdio_wr(PHYMISC_REG3, val2 & core_reset); ++ } ++} ++ ++void tx_restart(int lane) ++{ ++ tx_core_assert(lane); ++ tx_pll_assert(lane); ++ tx_pll_de_assert(lane); ++ usleep_range(1500, 1600); ++ tx_core_de_assert(lane); ++} ++ ++void disable_lane(int lane) ++{ ++ rx_reset_assert(lane); ++ rx_powerdown_assert(lane); ++ tx_core_assert(lane); ++ lol_disable(lane); ++} ++ ++void toggle_reset(int lane) ++{ ++ int reg, val, orig; ++ ++ if (lane == ALL_LANES) { ++ mdio_wr(PHYMISC_REG2, 0x8000); ++ udelay(100); ++ mdio_wr(PHYMISC_REG2, 0x0000); ++ } else { ++ reg = lane * 0x100 + PHYCTRL_REG8; ++ val = (1 << 6); ++ orig = mdio_rd(reg); ++ mdio_wr(reg, orig + val); ++ udelay(100); ++ mdio_wr(reg, orig); ++ } ++} ++ ++int az_complete_test(int lane) ++{ ++ int success = 1, value; ++ ++ if (lane == 0 || lane == ALL_LANES) { ++ value = mdio_rd(PHYCTRL_REG5); ++ success = success & bit_test(value, 2); ++ } ++ if (lane == 1 || lane == ALL_LANES) { ++ value = mdio_rd(PHYCTRL_REG5 + 0x100); ++ success = success & bit_test(value, 2); ++ } ++ if (lane == 2 || lane == ALL_LANES) { ++ value = mdio_rd(PHYCTRL_REG5 + 0x200); ++ success = success & bit_test(value, 2); ++ } ++ if (lane == 3 || lane == ALL_LANES) { ++ value = mdio_rd(PHYCTRL_REG5 + 0x300); ++ success = success & bit_test(value, 2); ++ } ++ ++ return success; ++} ++ ++void save_az_offsets(int lane) ++{ ++ int i; ++ ++#define AZ_OFFSET_LANE_UPDATE(reg, lane) \ ++ mdio_wr((reg) + (lane) * 0x100, \ ++ (mdio_rd((reg) + (lane) * 0x100) >> 8)) ++ ++ if (lane == ALL_LANES) { ++ for (i = 0; i < ALL_LANES; i++) { ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 1, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 2, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 3, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 1, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 2, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 3, i); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG22, i); ++ } ++ } else { ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 1, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 2, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 3, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 1, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 2, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 3, lane); ++ AZ_OFFSET_LANE_UPDATE(PHYMISC_REG22, lane); ++ } ++ ++ mdio_wr(PHYCTRL_REG7, 0x0001); ++} ++ ++void save_vco_codes(int lane) ++{ ++ int i; ++ ++ if (lane == ALL_LANES) { ++ for (i = 0; i < ALL_LANES; i++) { ++ vco_codes[i] = mdio_rd(PHYMISC_REG5 + i * 0x100); ++ mdio_wr(PHYMISC_REG5 + i * 0x100, ++ vco_codes[i] + RX_VCO_CODE_OFFSET); ++ } ++ } else { ++ vco_codes[lane] = mdio_rd(PHYMISC_REG5 + lane * 0x100); ++ mdio_wr(PHYMISC_REG5 + lane * 0x100, ++ vco_codes[lane] + RX_VCO_CODE_OFFSET); ++ } ++} ++ ++int inphi_lane_recovery(int lane) ++{ ++ int i, value, az_pass; ++ ++ switch (lane) { ++ case 0: ++ case 1: ++ case 2: ++ case 3: ++ rx_reset_assert(lane); ++ mdelay(20); ++ break; ++ case ALL_LANES: ++ mdio_wr(PHYMISC_REG2, 0x9C00); ++ mdelay(20); ++ do { ++ value = mdio_rd(PHYMISC_REG2); ++ udelay(10); ++ } while (!bit_test(value, 4)); ++ break; ++ default: ++ dev_err(&inphi_phydev->mdio.dev, ++ "Incorrect usage of APIs in %s driver\n", ++ inphi_phydev->drv->name); ++ break; ++ } ++ ++ if (lane == ALL_LANES) { ++ for (i = 0; i < ALL_LANES; i++) ++ mdio_wr(PHYMISC_REG7 + i * 0x100, VCO_CODE); ++ } else { ++ mdio_wr(PHYMISC_REG7 + lane * 0x100, VCO_CODE); ++ } ++ ++ if (lane == ALL_LANES) ++ for (i = 0; i < ALL_LANES; i++) ++ mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0418); ++ else ++ mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0418); ++ ++ mdio_wr(PHYCTRL_REG7, 0x0000); ++ ++ rx_reset_de_assert(lane); ++ ++ if (lane == ALL_LANES) { ++ for (i = 0; i < ALL_LANES; i++) { ++ mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0410); ++ mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0412); ++ } ++ } else { ++ mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0410); ++ mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0412); ++ } ++ ++ for (i = 0; i < 64; i++) { ++ mdelay(100); ++ az_pass = az_complete_test(lane); ++ if (az_pass) { ++ save_az_offsets(lane); ++ break; ++ } ++ } ++ ++ if (!az_pass) { ++ pr_info("in112525: AZ calibration fail @ lane=%d\n", lane); ++ return -1; ++ } ++ ++ if (lane == ALL_LANES) { ++ mdio_wr(PHYMISC_REG8, 0x0002); ++ mdio_wr(PHYMISC_REG9, 0x2028); ++ mdio_wr(PHYCTRL_REG6, 0x0010); ++ usleep_range(1000, 1200); ++ mdio_wr(PHYCTRL_REG6, 0x0110); ++ mdelay(30); ++ mdio_wr(PHYMISC_REG9, 0x3020); ++ } else { ++ mdio_wr(PHYMISC_REG4 + lane * 0x100, 0x0002); ++ mdio_wr(PHYMISC_REG6 + lane * 0x100, 0x2028); ++ mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0010); ++ usleep_range(1000, 1200); ++ mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0110); ++ mdelay(30); ++ mdio_wr(PHYMISC_REG6 + lane * 0x100, 0x3020); ++ } ++ ++ if (lane == ALL_LANES) { ++ mdio_wr(PHYMISC_REG2, 0x1C00); ++ mdio_wr(PHYMISC_REG2, 0x0C00); ++ } else { ++ tx_restart(lane); ++ mdelay(11); ++ } ++ ++ if (lane == ALL_LANES) { ++ if (bit_test(mdio_rd(PHYMISC_REG2), 6) == 0) ++ return -1; ++ } else { ++ if (tx_pll_lock_test(lane) == 0) ++ return -1; ++ } ++ ++ save_vco_codes(lane); ++ ++ if (lane == ALL_LANES) { ++ mdio_wr(PHYMISC_REG2, 0x0400); ++ mdio_wr(PHYMISC_REG2, 0x0000); ++ value = mdio_rd(PHYCTRL_REG1); ++ value = value & 0xffbf; ++ mdio_wr(PHYCTRL_REG2, value); ++ } else { ++ tx_core_de_assert(lane); ++ } ++ ++ if (lane == ALL_LANES) { ++ mdio_wr(PHYMISC_REG1, 0x8000); ++ mdio_wr(PHYMISC_REG1, 0x0000); ++ } ++ mdio_rd(PHYMISC_REG1); ++ mdio_rd(PHYMISC_REG1); ++ usleep_range(1000, 1200); ++ mdio_rd(PHYSTAT_REG1); ++ mdio_rd(PHYSTAT_REG2); ++ ++ return 0; ++} ++ ++static void mykmod_work_handler(struct work_struct *w) ++{ ++ int all_lanes_lock, lane0_lock, lane1_lock, lane2_lock, lane3_lock; ++ ++ lane0_lock = bit_test(mdio_rd(0x123), 15); ++ lane1_lock = bit_test(mdio_rd(0x223), 15); ++ lane2_lock = bit_test(mdio_rd(0x323), 15); ++ lane3_lock = bit_test(mdio_rd(0x423), 15); ++ ++ /* check if the chip had any successful lane lock from the previous ++ * stage (e.g. u-boot) ++ */ ++ all_lanes_lock = lane0_lock | lane1_lock | lane2_lock | lane3_lock; ++ ++ if (!all_lanes_lock) { ++ /* start fresh */ ++ inphi_lane_recovery(ALL_LANES); ++ } else { ++ if (!lane0_lock) ++ inphi_lane_recovery(0); ++ if (!lane1_lock) ++ inphi_lane_recovery(1); ++ if (!lane2_lock) ++ inphi_lane_recovery(2); ++ if (!lane3_lock) ++ inphi_lane_recovery(3); ++ } ++ ++ queue_delayed_work(wq, &mykmod_work, onesec); ++} ++ ++int inphi_probe(struct phy_device *phydev) ++{ ++ int phy_id = 0, id_lsb = 0, id_msb = 0; ++ ++ /* setup the inphi_phydev ptr for mdio_rd/mdio_wr APIs */ ++ inphi_phydev = phydev; ++ ++ /* Read device id from phy registers */ ++ id_lsb = mdio_rd(INPHI_S03_DEVICE_ID_MSB); ++ if (id_lsb < 0) ++ return -ENXIO; ++ ++ phy_id = id_lsb << 16; ++ ++ id_msb = mdio_rd(INPHI_S03_DEVICE_ID_LSB); ++ if (id_msb < 0) ++ return -ENXIO; ++ ++ phy_id |= id_msb; ++ ++ /* Make sure the device tree binding matched the driver with the ++ * right device. ++ */ ++ if (phy_id != phydev->drv->phy_id) { ++ dev_err(&phydev->mdio.dev, ++ "Error matching phy with %s driver\n", ++ phydev->drv->name); ++ return -ENODEV; ++ } ++ ++ /* update the local phydev pointer, used inside all APIs */ ++ inphi_phydev = phydev; ++ onesec = msecs_to_jiffies(INPHI_POLL_DELAY); ++ ++ wq = create_singlethread_workqueue("inphi_kmod"); ++ if (wq) { ++ queue_delayed_work(wq, &mykmod_work, onesec); ++ } else { ++ dev_err(&phydev->mdio.dev, ++ "Error creating kernel workqueue for %s driver\n", ++ phydev->drv->name); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static struct phy_driver inphi_driver[] = { ++{ ++ .phy_id = PHY_ID_IN112525, ++ .phy_id_mask = 0x0ff0fff0, ++ .name = "Inphi 112525_S03", ++ .features = PHY_GBIT_FEATURES, ++ .probe = &inphi_probe, ++}, ++}; ++ ++module_phy_driver(inphi_driver); ++ ++static struct mdio_device_id __maybe_unused inphi_tbl[] = { ++ { PHY_ID_IN112525, 0x0ff0fff0}, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(mdio, inphi_tbl); +--- /dev/null ++++ b/drivers/net/phy/mdio-mux-multiplexer.c +@@ -0,0 +1,122 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* MDIO bus multiplexer using kernel multiplexer subsystem ++ * ++ * Copyright 2019 NXP ++ */ ++ ++#include ++#include ++#include ++#include ++ ++struct mdio_mux_multiplexer_state { ++ struct mux_control *muxc; ++ bool do_deselect; ++ void *mux_handle; ++}; ++ ++/** ++ * mdio_mux_multiplexer_switch_fn - This function is called by the mdio-mux ++ * layer when it thinks the mdio bus ++ * multiplexer needs to switch. ++ * @current_child: current value of the mux register. ++ * @desired_child: value of the 'reg' property of the target child MDIO node. ++ * @data: Private data used by this switch_fn passed to mdio_mux_init function ++ * via mdio_mux_init(.., .., .., .., data, ..). ++ * ++ * The first time this function is called, current_child == -1. ++ * If current_child == desired_child, then the mux is already set to the ++ * correct bus. ++ */ ++static int mdio_mux_multiplexer_switch_fn(int current_child, int desired_child, ++ void *data) ++{ ++ struct platform_device *pdev; ++ struct mdio_mux_multiplexer_state *s; ++ int ret = 0; ++ ++ pdev = (struct platform_device *)data; ++ s = platform_get_drvdata(pdev); ++ ++ if (!(current_child ^ desired_child)) ++ return 0; ++ ++ if (s->do_deselect) ++ ret = mux_control_deselect(s->muxc); ++ if (ret) { ++ dev_err(&pdev->dev, "mux_control_deselect failed in %s: %d\n", ++ __func__, ret); ++ return ret; ++ } ++ ++ ret = mux_control_select(s->muxc, desired_child); ++ if (!ret) { ++ dev_dbg(&pdev->dev, "%s %d -> %d\n", __func__, current_child, ++ desired_child); ++ s->do_deselect = true; ++ } else { ++ s->do_deselect = false; ++ } ++ ++ return ret; ++} ++ ++static int mdio_mux_multiplexer_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct mdio_mux_multiplexer_state *s; ++ int ret = 0; ++ ++ s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); ++ if (!s) ++ return -ENOMEM; ++ ++ s->muxc = devm_mux_control_get(dev, NULL); ++ if (IS_ERR(s->muxc)) { ++ ret = PTR_ERR(s->muxc); ++ if (ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, "Failed to get mux: %d\n", ret); ++ return ret; ++ } ++ ++ platform_set_drvdata(pdev, s); ++ ++ ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node, ++ mdio_mux_multiplexer_switch_fn, &s->mux_handle, ++ pdev, NULL); ++ ++ return ret; ++} ++ ++static int mdio_mux_multiplexer_remove(struct platform_device *pdev) ++{ ++ struct mdio_mux_multiplexer_state *s = platform_get_drvdata(pdev); ++ ++ mdio_mux_uninit(s->mux_handle); ++ ++ if (s->do_deselect) ++ mux_control_deselect(s->muxc); ++ ++ return 0; ++} ++ ++static const struct of_device_id mdio_mux_multiplexer_match[] = { ++ { .compatible = "mdio-mux-multiplexer", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mdio_mux_multiplexer_match); ++ ++static struct platform_driver mdio_mux_multiplexer_driver = { ++ .driver = { ++ .name = "mdio-mux-multiplexer", ++ .of_match_table = mdio_mux_multiplexer_match, ++ }, ++ .probe = mdio_mux_multiplexer_probe, ++ .remove = mdio_mux_multiplexer_remove, ++}; ++ ++module_platform_driver(mdio_mux_multiplexer_driver); ++ ++MODULE_DESCRIPTION("MDIO bus multiplexer using kernel multiplexer subsystem"); ++MODULE_AUTHOR("Pankaj Bansal "); ++MODULE_LICENSE("GPL"); --- a/drivers/net/phy/swphy.c +++ b/drivers/net/phy/swphy.c @@ -77,6 +77,7 @@ static const struct swmii_regs duplex[] diff --git a/target/linux/layerscape/patches-4.14/710-pfe-eth-support-layerscape.patch b/target/linux/layerscape/patches-4.14/710-pfe-eth-support-layerscape.patch index ae64527f3d..80baa82f9a 100644 --- a/target/linux/layerscape/patches-4.14/710-pfe-eth-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/710-pfe-eth-support-layerscape.patch @@ -1,7 +1,8 @@ -From 93febc09be23aa75cbc5bf5e76250c923f4004e5 Mon Sep 17 00:00:00 2001 +From 35745905430a4c9827c235d42f3a61bef34043e8 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:59 +0800 -Subject: [PATCH 16/40] pfe-eth: support layerscape +Date: Fri, 19 Apr 2019 13:21:09 +0800 +Subject: [PATCH] pfe-eth: support layerscape + This is an integrated patch of pfe-eth for layerscape Signed-off-by: Akhila Kavi @@ -9,15 +10,17 @@ Signed-off-by: Akhil Goyal Signed-off-by: Anjaneyulu Jagarlmudi Signed-off-by: Archana Madhavan Signed-off-by: Bhaskar Upadhaya +Signed-off-by: Biwen Li Signed-off-by: Calvin Johnson Signed-off-by: Gagandeep Singh Signed-off-by: Guanhua Gao +Signed-off-by: Sachin Saxena +Signed-off-by: Shreyansh Jain Signed-off-by: Yangbo Lu -Signed-off-by: Biwen Li --- - .../devicetree/bindings/net/fsl_ppfe/pfe.txt | 173 ++ - drivers/staging/fsl_ppfe/Kconfig | 20 + - drivers/staging/fsl_ppfe/Makefile | 19 + + .../devicetree/bindings/net/fsl_ppfe/pfe.txt | 199 ++ + drivers/staging/fsl_ppfe/Kconfig | 21 + + drivers/staging/fsl_ppfe/Makefile | 20 + drivers/staging/fsl_ppfe/TODO | 2 + drivers/staging/fsl_ppfe/include/pfe/cbus.h | 78 + .../staging/fsl_ppfe/include/pfe/cbus/bmu.h | 55 + @@ -28,29 +31,31 @@ Signed-off-by: Biwen Li .../fsl_ppfe/include/pfe/cbus/hif_nocpy.h | 50 + .../fsl_ppfe/include/pfe/cbus/tmu_csr.h | 168 ++ .../fsl_ppfe/include/pfe/cbus/util_csr.h | 61 + - drivers/staging/fsl_ppfe/include/pfe/pfe.h | 373 +++ - drivers/staging/fsl_ppfe/pfe_ctrl.c | 238 ++ - drivers/staging/fsl_ppfe/pfe_ctrl.h | 112 + - drivers/staging/fsl_ppfe/pfe_debugfs.c | 111 + - drivers/staging/fsl_ppfe/pfe_debugfs.h | 25 + - drivers/staging/fsl_ppfe/pfe_eth.c | 2521 +++++++++++++++++ - drivers/staging/fsl_ppfe/pfe_eth.h | 185 ++ - drivers/staging/fsl_ppfe/pfe_firmware.c | 314 ++ - drivers/staging/fsl_ppfe/pfe_firmware.h | 32 + - drivers/staging/fsl_ppfe/pfe_hal.c | 1528 ++++++++++ - drivers/staging/fsl_ppfe/pfe_hif.c | 1072 +++++++ - drivers/staging/fsl_ppfe/pfe_hif.h | 212 ++ - drivers/staging/fsl_ppfe/pfe_hif_lib.c | 640 +++++ - drivers/staging/fsl_ppfe/pfe_hif_lib.h | 241 ++ - drivers/staging/fsl_ppfe/pfe_hw.c | 176 ++ - drivers/staging/fsl_ppfe/pfe_hw.h | 27 + - .../staging/fsl_ppfe/pfe_ls1012a_platform.c | 385 +++ - drivers/staging/fsl_ppfe/pfe_mod.c | 156 + - drivers/staging/fsl_ppfe/pfe_mod.h | 114 + - drivers/staging/fsl_ppfe/pfe_perfmon.h | 38 + - drivers/staging/fsl_ppfe/pfe_sysfs.c | 818 ++++++ - drivers/staging/fsl_ppfe/pfe_sysfs.h | 29 + - 35 files changed, 10690 insertions(+) + drivers/staging/fsl_ppfe/include/pfe/pfe.h | 372 +++ + drivers/staging/fsl_ppfe/pfe_cdev.c | 258 ++ + drivers/staging/fsl_ppfe/pfe_cdev.h | 41 + + drivers/staging/fsl_ppfe/pfe_ctrl.c | 226 ++ + drivers/staging/fsl_ppfe/pfe_ctrl.h | 100 + + drivers/staging/fsl_ppfe/pfe_debugfs.c | 99 + + drivers/staging/fsl_ppfe/pfe_debugfs.h | 13 + + drivers/staging/fsl_ppfe/pfe_eth.c | 2554 +++++++++++++++++ + drivers/staging/fsl_ppfe/pfe_eth.h | 175 ++ + drivers/staging/fsl_ppfe/pfe_firmware.c | 302 ++ + drivers/staging/fsl_ppfe/pfe_firmware.h | 20 + + drivers/staging/fsl_ppfe/pfe_hal.c | 1516 ++++++++++ + drivers/staging/fsl_ppfe/pfe_hif.c | 1060 +++++++ + drivers/staging/fsl_ppfe/pfe_hif.h | 200 ++ + drivers/staging/fsl_ppfe/pfe_hif_lib.c | 628 ++++ + drivers/staging/fsl_ppfe/pfe_hif_lib.h | 229 ++ + drivers/staging/fsl_ppfe/pfe_hw.c | 164 ++ + drivers/staging/fsl_ppfe/pfe_hw.h | 15 + + .../staging/fsl_ppfe/pfe_ls1012a_platform.c | 368 +++ + drivers/staging/fsl_ppfe/pfe_mod.c | 158 + + drivers/staging/fsl_ppfe/pfe_mod.h | 103 + + drivers/staging/fsl_ppfe/pfe_perfmon.h | 26 + + drivers/staging/fsl_ppfe/pfe_sysfs.c | 806 ++++++ + drivers/staging/fsl_ppfe/pfe_sysfs.h | 17 + + 37 files changed, 10821 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt create mode 100644 drivers/staging/fsl_ppfe/Kconfig create mode 100644 drivers/staging/fsl_ppfe/Makefile @@ -65,6 +70,8 @@ Signed-off-by: Biwen Li create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h create mode 100644 drivers/staging/fsl_ppfe/include/pfe/pfe.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.h create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.c create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.h create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.c @@ -89,7 +96,7 @@ Signed-off-by: Biwen Li --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt -@@ -0,0 +1,173 @@ +@@ -0,0 +1,199 @@ +============================================================================= +NXP Programmable Packet Forwarding Engine Device Bindings + @@ -219,11 +226,12 @@ Signed-off-by: Biwen Li + Definition: Must be present. Value should be the id of the bus + connected to gemac. + -+- fsl,gemac-phy-id -+ Usage: required -+ Value type: -+ Definition: Must be present. Value should be the id of the phy -+ connected to gemac. ++- fsl,gemac-phy-id (deprecated binding) ++ Usage: required ++ Value type: ++ Definition: This binding shouldn't be used with new platforms. ++ Must be present. Value should be the id of the phy ++ connected to gemac. + +- fsl,mdio-mux-val + Usage: required @@ -236,15 +244,20 @@ Signed-off-by: Biwen Li + Value type: + Definition: Must include "sgmii" + -+- fsl,pfe-phy-if-flags -+ Usage: required -+ Value type: -+ Definition: Must be present. Value should be 0 by default. -+ If there is not phy connected, this need to be 1. ++- fsl,pfe-phy-if-flags (deprecated binding) ++ Usage: required ++ Value type: ++ Definition: This binding shouldn't be used with new platforms. ++ Must be present. Value should be 0 by default. ++ If there is not phy connected, this need to be 1. + -+- mdio -+ optional subnode that specifies the mdio bus. This has reg -+ property which is used to enable/disable the mdio bus. ++- phy-handle ++ Usage: optional ++ Value type: ++ Definition: phandle to the PHY device connected to this device. ++ ++- mdio : A required subnode which specifies the mdio bus in the PFE and used as ++a container for phy nodes according to ../phy.txt. + +EXAMPLE + @@ -254,23 +267,44 @@ Signed-off-by: Biwen Li + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ + fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; -+ fsl,pfe-phy-if-flags = <0x0>; ++ phy-handle = <&sgmii_phy1>; ++}; ++ ++ ++ethernet@1 { ++ compatible = "fsl,pfe-gemac-port"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x1>; /* GEM_ID */ ++ fsl,gemac-bus-id = <0x1>; /* BUS_ID */ ++ fsl,mdio-mux-val = <0x0>; ++ phy-mode = "sgmii"; ++ phy-handle = <&sgmii_phy2>; ++}; ++ ++mdio@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ sgmii_phy1: ethernet-phy@2 { ++ reg = <0x2>; ++ }; + -+ mdio@0 { -+ reg = <0x1>; /* enabled/disabled */ ++ sgmii_phy2: ethernet-phy@1 { ++ reg = <0x1>; + }; +}; --- /dev/null +++ b/drivers/staging/fsl_ppfe/Kconfig -@@ -0,0 +1,20 @@ +@@ -0,0 +1,21 @@ +# +# Freescale Programmable Packet Forwarding Engine driver +# +config FSL_PPFE + bool "Freescale PPFE Driver" ++ select FSL_GUTS + default n + ---help--- + Freescale LS1012A SoC has a Programmable Packet Forwarding Engine. @@ -288,7 +322,7 @@ Signed-off-by: Biwen Li +endif # FSL_PPFE --- /dev/null +++ b/drivers/staging/fsl_ppfe/Makefile -@@ -0,0 +1,19 @@ +@@ -0,0 +1,20 @@ +# +# Makefile for Freesecale PPFE driver +# @@ -307,7 +341,8 @@ Signed-off-by: Biwen Li + pfe_sysfs.o \ + pfe_debugfs.o \ + pfe_ls1012a_platform.o \ -+ pfe_hal.o ++ pfe_hal.o \ ++ pfe_cdev.o --- /dev/null +++ b/drivers/staging/fsl_ppfe/TODO @@ -0,0 +1,2 @@ @@ -1471,7 +1506,7 @@ Signed-off-by: Biwen Li +#endif /* _UTIL_CSR_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h -@@ -0,0 +1,373 @@ +@@ -0,0 +1,372 @@ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP @@ -1742,7 +1777,6 @@ Signed-off-by: Biwen Li +void gemac_init(void *base, void *config); +void gemac_disable_rx_checksum_offload(void *base); +void gemac_enable_rx_checksum_offload(void *base); -+void gemac_set_mdc_div(void *base, int mdc_div); +void gemac_set_speed(void *base, enum mac_speed gem_speed); +void gemac_set_duplex(void *base, int duplex); +void gemac_set_mode(void *base, int mode); @@ -1846,24 +1880,317 @@ Signed-off-by: Biwen Li + +#endif /* _PFE_H_ */ --- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_cdev.c +@@ -0,0 +1,258 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Copyright 2018 NXP ++ */ ++ ++/* @pfe_cdev.c. ++ * Dummy device representing the PFE US in userspace. ++ * - used for interacting with the kernel layer for link status ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "pfe_cdev.h" ++#include "pfe_mod.h" ++ ++static int pfe_majno; ++static struct class *pfe_char_class; ++static struct device *pfe_char_dev; ++struct eventfd_ctx *g_trigger; ++ ++struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT]; ++ ++static int pfe_cdev_open(struct inode *inp, struct file *fp) ++{ ++ pr_debug("PFE CDEV device opened.\n"); ++ return 0; ++} ++ ++static ssize_t pfe_cdev_read(struct file *fp, char *buf, ++ size_t len, loff_t *off) ++{ ++ int ret = 0; ++ ++ pr_info("PFE CDEV attempt copying (%lu) size of user.\n", ++ sizeof(link_states)); ++ ++ pr_debug("Dump link_state on screen before copy_to_user\n"); ++ for (; ret < PFE_CDEV_ETH_COUNT; ret++) { ++ pr_debug("%u %u", link_states[ret].phy_id, ++ link_states[ret].state); ++ pr_debug("\n"); ++ } ++ ++ /* Copy to user the value in buffer sized len */ ++ ret = copy_to_user(buf, &link_states, sizeof(link_states)); ++ if (ret != 0) { ++ pr_err("Failed to send (%d)bytes of (%lu) requested.\n", ++ ret, len); ++ return -EFAULT; ++ } ++ ++ /* offset set back to 0 as there is contextual reading offset */ ++ *off = 0; ++ pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states)); ++ ++ return sizeof(link_states); ++} ++ ++/** ++ * This function is for getting some commands from user through non-IOCTL ++ * channel. It can used to configure the device. ++ * TODO: To be filled in future, if require duplex communication with user ++ * space. ++ */ ++static ssize_t pfe_cdev_write(struct file *fp, const char *buf, ++ size_t len, loff_t *off) ++{ ++ pr_info("PFE CDEV Write operation not supported!\n"); ++ ++ return -EFAULT; ++} ++ ++static int pfe_cdev_release(struct inode *inp, struct file *fp) ++{ ++ if (g_trigger) { ++ free_irq(pfe->hif_irq, g_trigger); ++ eventfd_ctx_put(g_trigger); ++ g_trigger = NULL; ++ } ++ ++ pr_info("PFE_CDEV: Device successfully closed\n"); ++ return 0; ++} ++ ++/* ++ * hif_us_isr- ++ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block ++ */ ++static irqreturn_t hif_us_isr(int irq, void *arg) ++{ ++ struct eventfd_ctx *trigger = (struct eventfd_ctx *)arg; ++ int int_status; ++ int int_enable_mask; ++ ++ /*Read hif interrupt source register */ ++ int_status = readl_relaxed(HIF_INT_SRC); ++ int_enable_mask = readl_relaxed(HIF_INT_ENABLE); ++ ++ if ((int_status & HIF_INT) == 0) ++ return IRQ_NONE; ++ ++ if (int_status & HIF_RXPKT_INT) { ++ int_enable_mask &= ~(HIF_RXPKT_INT); ++ /* Disable interrupts, they will be enabled after ++ * they are serviced ++ */ ++ writel_relaxed(int_enable_mask, HIF_INT_ENABLE); ++ ++ eventfd_signal(trigger, 1); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++#define PFE_INTR_COAL_USECS 100 ++static long pfe_cdev_ioctl(struct file *fp, unsigned int cmd, ++ unsigned long arg) ++{ ++ int ret = -EFAULT; ++ int __user *argp = (int __user *)arg; ++ ++ pr_debug("PFE CDEV IOCTL Called with cmd=(%u)\n", cmd); ++ ++ switch (cmd) { ++ case PFE_CDEV_ETH0_STATE_GET: ++ /* Return an unsigned int (link state) for ETH0 */ ++ *argp = link_states[0].state; ++ pr_debug("Returning state=%d for ETH0\n", *argp); ++ ret = 0; ++ break; ++ case PFE_CDEV_ETH1_STATE_GET: ++ /* Return an unsigned int (link state) for ETH0 */ ++ *argp = link_states[1].state; ++ pr_debug("Returning state=%d for ETH1\n", *argp); ++ ret = 0; ++ break; ++ case PFE_CDEV_HIF_INTR_EN: ++ /* Return success/failure */ ++ g_trigger = eventfd_ctx_fdget(*argp); ++ if (IS_ERR(g_trigger)) ++ return PTR_ERR(g_trigger); ++ ret = request_irq(pfe->hif_irq, hif_us_isr, 0, "pfe_hif", ++ g_trigger); ++ if (ret) { ++ pr_err("%s: failed to get the hif IRQ = %d\n", ++ __func__, pfe->hif_irq); ++ eventfd_ctx_put(g_trigger); ++ g_trigger = NULL; ++ } ++ writel((PFE_INTR_COAL_USECS * (pfe->ctrl.sys_clk / 1000)) | ++ HIF_INT_COAL_ENABLE, HIF_INT_COAL); ++ ++ pr_debug("request_irq for hif interrupt: %d\n", pfe->hif_irq); ++ ret = 0; ++ break; ++ default: ++ pr_info("Unsupport cmd (%d) for PFE CDEV.\n", cmd); ++ break; ++ }; ++ ++ return ret; ++} ++ ++static unsigned int pfe_cdev_poll(struct file *fp, ++ struct poll_table_struct *wait) ++{ ++ pr_info("PFE CDEV poll method not supported\n"); ++ return 0; ++} ++ ++static const struct file_operations pfe_cdev_fops = { ++ .open = pfe_cdev_open, ++ .read = pfe_cdev_read, ++ .write = pfe_cdev_write, ++ .release = pfe_cdev_release, ++ .unlocked_ioctl = pfe_cdev_ioctl, ++ .poll = pfe_cdev_poll, ++}; ++ ++int pfe_cdev_init(void) ++{ ++ int ret; ++ ++ pr_debug("PFE CDEV initialization begin\n"); ++ ++ /* Register the major number for the device */ ++ pfe_majno = register_chrdev(0, PFE_CDEV_NAME, &pfe_cdev_fops); ++ if (pfe_majno < 0) { ++ pr_err("Unable to register PFE CDEV. PFE CDEV not available\n"); ++ ret = pfe_majno; ++ goto cleanup; ++ } ++ ++ pr_debug("PFE CDEV assigned major number: %d\n", pfe_majno); ++ ++ /* Register the class for the device */ ++ pfe_char_class = class_create(THIS_MODULE, PFE_CLASS_NAME); ++ if (IS_ERR(pfe_char_class)) { ++ pr_err( ++ "Failed to init class for PFE CDEV. PFE CDEV not available.\n"); ++ goto cleanup; ++ } ++ ++ pr_debug("PFE CDEV Class created successfully.\n"); ++ ++ /* Create the device without any parent and without any callback data */ ++ pfe_char_dev = device_create(pfe_char_class, NULL, ++ MKDEV(pfe_majno, 0), NULL, ++ PFE_CDEV_NAME); ++ if (IS_ERR(pfe_char_dev)) { ++ pr_err("Unable to PFE CDEV device. PFE CDEV not available.\n"); ++ ret = PTR_ERR(pfe_char_dev); ++ goto cleanup; ++ } ++ ++ /* Information structure being shared with the userspace */ ++ memset(link_states, 0, sizeof(struct pfe_shared_info) * ++ PFE_CDEV_ETH_COUNT); ++ ++ pr_info("PFE CDEV created: %s\n", PFE_CDEV_NAME); ++ ++ ret = 0; ++ return ret; ++ ++cleanup: ++ if (!IS_ERR(pfe_char_class)) ++ class_destroy(pfe_char_class); ++ ++ if (pfe_majno > 0) ++ unregister_chrdev(pfe_majno, PFE_CDEV_NAME); ++ ++ ret = -EFAULT; ++ return ret; ++} ++ ++void pfe_cdev_exit(void) ++{ ++ if (!IS_ERR(pfe_char_dev)) ++ device_destroy(pfe_char_class, MKDEV(pfe_majno, 0)); ++ ++ if (!IS_ERR(pfe_char_class)) { ++ class_unregister(pfe_char_class); ++ class_destroy(pfe_char_class); ++ } ++ ++ if (pfe_majno > 0) ++ unregister_chrdev(pfe_majno, PFE_CDEV_NAME); ++ ++ /* reset the variables */ ++ pfe_majno = 0; ++ pfe_char_class = NULL; ++ pfe_char_dev = NULL; ++ ++ pr_info("PFE CDEV Removed.\n"); ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_cdev.h +@@ -0,0 +1,41 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ ++/* ++ * Copyright 2018 NXP ++ */ ++ ++#ifndef _PFE_CDEV_H_ ++#define _PFE_CDEV_H_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define PFE_CDEV_NAME "pfe_us_cdev" ++#define PFE_CLASS_NAME "ppfe_us" ++ ++/* Extracted from ls1012a_pfe_platform_data, there are 3 interfaces which are ++ * supported by PFE driver. Should be updated if number of eth devices are ++ * changed. ++ */ ++#define PFE_CDEV_ETH_COUNT 3 ++ ++struct pfe_shared_info { ++ uint32_t phy_id; /* Link phy ID */ ++ uint8_t state; /* Has either 0 or 1 */ ++}; ++ ++extern struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT]; ++ ++/* IOCTL Commands */ ++#define PFE_CDEV_ETH0_STATE_GET _IOR('R', 0, int) ++#define PFE_CDEV_ETH1_STATE_GET _IOR('R', 1, int) ++#define PFE_CDEV_HIF_INTR_EN _IOWR('R', 2, int) ++ ++int pfe_cdev_init(void); ++void pfe_cdev_exit(void); ++ ++#endif /* _PFE_CDEV_H_ */ +--- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_ctrl.c -@@ -0,0 +1,238 @@ +@@ -0,0 +1,226 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include @@ -2088,23 +2415,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_ctrl.h -@@ -0,0 +1,112 @@ +@@ -0,0 +1,100 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_CTRL_H_ @@ -2203,23 +2518,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_CTRL_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_debugfs.c -@@ -0,0 +1,111 @@ +@@ -0,0 +1,99 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include @@ -2317,23 +2620,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_debugfs.h -@@ -0,0 +1,25 @@ +@@ -0,0 +1,13 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_DEBUGFS_H_ @@ -2345,23 +2636,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_DEBUGFS_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_eth.c -@@ -0,0 +1,2521 @@ +@@ -0,0 +1,2554 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +/* @pfe_eth.c. @@ -2387,6 +2666,9 @@ Signed-off-by: Biwen Li +#include +#include + ++#include ++#include ++ +#include +#include +#include @@ -2400,9 +2682,11 @@ Signed-off-by: Biwen Li + +#include "pfe_mod.h" +#include "pfe_eth.h" ++#include "pfe_cdev.h" + +#define LS1012A_REV_1_0 0x87040010 + ++bool pfe_use_old_dts_phy; +bool pfe_errata_a010897; + +static void *cbus_emac_base[3]; @@ -2414,6 +2698,36 @@ Signed-off-by: Biwen Li +static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int + from_tx, int n_desc); + ++/* MDIO registers */ ++#define MDIO_SGMII_CR 0x00 ++#define MDIO_SGMII_SR 0x01 ++#define MDIO_SGMII_DEV_ABIL_SGMII 0x04 ++#define MDIO_SGMII_LINK_TMR_L 0x12 ++#define MDIO_SGMII_LINK_TMR_H 0x13 ++#define MDIO_SGMII_IF_MODE 0x14 ++ ++/* SGMII Control defines */ ++#define SGMII_CR_RST 0x8000 ++#define SGMII_CR_AN_EN 0x1000 ++#define SGMII_CR_RESTART_AN 0x0200 ++#define SGMII_CR_FD 0x0100 ++#define SGMII_CR_SPEED_SEL1_1G 0x0040 ++#define SGMII_CR_DEF_VAL (SGMII_CR_AN_EN | SGMII_CR_FD | \ ++ SGMII_CR_SPEED_SEL1_1G) ++ ++/* SGMII IF Mode */ ++#define SGMII_DUPLEX_HALF 0x10 ++#define SGMII_SPEED_10MBPS 0x00 ++#define SGMII_SPEED_100MBPS 0x04 ++#define SGMII_SPEED_1GBPS 0x08 ++#define SGMII_USE_SGMII_AN 0x02 ++#define SGMII_EN 0x01 ++ ++/* SGMII Device Ability for SGMII */ ++#define SGMII_DEV_ABIL_ACK 0x4000 ++#define SGMII_DEV_ABIL_EEE_CLK_STP_EN 0x0100 ++#define SGMII_DEV_ABIL_SGMII 0x0001 ++ +unsigned int gemac_regs[] = { + 0x0004, /* Interrupt event */ + 0x0008, /* Interrupt mask */ @@ -3115,10 +3429,9 @@ Signed-off-by: Biwen Li + */ +int pfe_eth_mdio_reset(struct mii_bus *bus) +{ -+ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; + u32 phy_speed; + -+ netif_info(priv, hw, priv->ndev, "%s\n", __func__); + + mutex_lock(&bus->mdio_lock); + @@ -3131,25 +3444,25 @@ Signed-off-by: Biwen Li + phy_speed = (DIV_ROUND_UP((pfe->ctrl.sys_clk * 1000), 4000000) + << EMAC_MII_SPEED_SHIFT); + phy_speed |= EMAC_HOLDTIME(0x5); -+ __raw_writel(phy_speed, priv->PHY_baseaddr + EMAC_MII_CTRL_REG); ++ __raw_writel(phy_speed, priv->mdio_base + EMAC_MII_CTRL_REG); + + mutex_unlock(&bus->mdio_lock); + + return 0; +} + -+/* pfe_eth_gemac_phy_timeout ++/* pfe_eth_mdio_timeout + * + */ -+static int pfe_eth_gemac_phy_timeout(struct pfe_eth_priv_s *priv, int timeout) ++static int pfe_eth_mdio_timeout(struct pfe_mdio_priv_s *priv, int timeout) +{ -+ while (!(__raw_readl(priv->PHY_baseaddr + EMAC_IEVENT_REG) & ++ while (!(__raw_readl(priv->mdio_base + EMAC_IEVENT_REG) & + EMAC_IEVENT_MII)) { + if (timeout-- <= 0) + return -1; + usleep_range(10, 20); + } -+ __raw_writel(EMAC_IEVENT_MII, priv->PHY_baseaddr + EMAC_IEVENT_REG); ++ __raw_writel(EMAC_IEVENT_MII, priv->mdio_base + EMAC_IEVENT_REG); + return 0; +} + @@ -3181,16 +3494,15 @@ Signed-off-by: Biwen Li +static int pfe_eth_mdio_write_addr(struct mii_bus *bus, int mii_id, + int dev_addr, int regnum) +{ -+ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; + + __raw_writel(EMAC_MII_DATA_PA(mii_id) | + EMAC_MII_DATA_RA(dev_addr) | + EMAC_MII_DATA_TA | EMAC_MII_DATA(regnum), -+ priv->PHY_baseaddr + EMAC_MII_DATA_REG); ++ priv->mdio_base + EMAC_MII_DATA_REG); + -+ if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) { -+ netdev_err(priv->ndev, "%s: phy MDIO address write timeout\n", -+ __func__); ++ if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) { ++ dev_err(&bus->dev, "phy MDIO address write timeout\n"); + return -1; + } + @@ -3200,7 +3512,7 @@ Signed-off-by: Biwen Li +static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum, + u16 value) +{ -+ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; + + /*To access external PHYs on QDS board mux needs to be configured*/ + if ((mii_id) && (pfe->mdio_muxval[mii_id])) @@ -3213,30 +3525,26 @@ Signed-off-by: Biwen Li + EMAC_MII_DATA_PA(mii_id) | + EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) | + EMAC_MII_DATA_TA | EMAC_MII_DATA(value), -+ priv->PHY_baseaddr + EMAC_MII_DATA_REG); ++ priv->mdio_base + EMAC_MII_DATA_REG); + } else { + /* start a write op */ + __raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR | + EMAC_MII_DATA_PA(mii_id) | + EMAC_MII_DATA_RA(regnum) | + EMAC_MII_DATA_TA | EMAC_MII_DATA(value), -+ priv->PHY_baseaddr + EMAC_MII_DATA_REG); ++ priv->mdio_base + EMAC_MII_DATA_REG); + } + -+ if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) { -+ netdev_err(priv->ndev, "%s: phy MDIO write timeout\n", -+ __func__); ++ if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) { ++ dev_err(&bus->dev, "%s: phy MDIO write timeout\n", __func__); + return -1; + } -+ netif_info(priv, hw, priv->ndev, "%s: phy %x reg %x val %x\n", __func__, -+ mii_id, regnum, value); -+ + return 0; +} + +static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ -+ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; + u16 value = 0; + + /*To access external PHYs on QDS board mux needs to be configured*/ @@ -3250,117 +3558,102 @@ Signed-off-by: Biwen Li + EMAC_MII_DATA_PA(mii_id) | + EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) | + EMAC_MII_DATA_TA, -+ priv->PHY_baseaddr + EMAC_MII_DATA_REG); ++ priv->mdio_base + EMAC_MII_DATA_REG); + } else { + /* start a read op */ + __raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD | + EMAC_MII_DATA_PA(mii_id) | + EMAC_MII_DATA_RA(regnum) | -+ EMAC_MII_DATA_TA, priv->PHY_baseaddr + ++ EMAC_MII_DATA_TA, priv->mdio_base + + EMAC_MII_DATA_REG); + } + -+ if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)) { -+ netdev_err(priv->ndev, "%s: phy MDIO read timeout\n", __func__); ++ if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) { ++ dev_err(&bus->dev, "%s: phy MDIO read timeout\n", __func__); + return -1; + } + -+ value = EMAC_MII_DATA(__raw_readl(priv->PHY_baseaddr + ++ value = EMAC_MII_DATA(__raw_readl(priv->mdio_base + + EMAC_MII_DATA_REG)); -+ netif_info(priv, hw, priv->ndev, "%s: phy %x reg %x val %x\n", __func__, -+ mii_id, regnum, value); + return value; +} + -+static int pfe_eth_mdio_init(struct pfe_eth_priv_s *priv, -+ struct ls1012a_mdio_platform_data *minfo) ++static int pfe_eth_mdio_init(struct pfe *pfe, ++ struct ls1012a_pfe_platform_data *pfe_info, ++ int ii) +{ ++ struct pfe_mdio_priv_s *priv = NULL; ++ struct ls1012a_mdio_platform_data *mdio_info; + struct mii_bus *bus; -+ int rc, ii; -+ struct phy_device *phydev; ++ struct device_node *mdio_node; ++ int rc = 0; + -+ netif_info(priv, drv, priv->ndev, "%s\n", __func__); -+ pr_info("%s\n", __func__); ++ mdio_info = (struct ls1012a_mdio_platform_data *) ++ pfe_info->ls1012a_mdio_pdata; ++ mdio_info->id = ii; + -+ bus = mdiobus_alloc(); ++ bus = mdiobus_alloc_size(sizeof(struct pfe_mdio_priv_s)); + if (!bus) { -+ netdev_err(priv->ndev, "mdiobus_alloc() failed\n"); ++ pr_err("mdiobus_alloc() failed\n"); + rc = -ENOMEM; -+ goto err0; ++ goto err_mdioalloc; + } + + bus->name = "ls1012a MDIO Bus"; ++ snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", mdio_info->id); ++ + bus->read = &pfe_eth_mdio_read; + bus->write = &pfe_eth_mdio_write; + bus->reset = &pfe_eth_mdio_reset; -+ snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", priv->id); -+ bus->priv = priv; -+ -+ bus->phy_mask = minfo->phy_mask; -+ priv->mdc_div = minfo->mdc_div; ++ bus->parent = pfe->dev; ++ bus->phy_mask = mdio_info->phy_mask; ++ bus->irq[0] = mdio_info->irq[0]; ++ priv = bus->priv; ++ priv->mdio_base = cbus_emac_base[ii]; + ++ priv->mdc_div = mdio_info->mdc_div; + if (!priv->mdc_div) + priv->mdc_div = 64; ++ dev_info(bus->parent, "%s: mdc_div: %d, phy_mask: %x\n", ++ __func__, priv->mdc_div, bus->phy_mask); + -+ bus->irq[0] = minfo->irq[0]; -+ -+ bus->parent = priv->pfe->dev; ++ mdio_node = of_get_child_by_name(pfe->dev->of_node, "mdio"); ++ if ((mdio_info->id == 0) && mdio_node) { ++ rc = of_mdiobus_register(bus, mdio_node); ++ of_node_put(mdio_node); ++ } else { ++ rc = mdiobus_register(bus); ++ } + -+ netif_info(priv, drv, priv->ndev, "%s: mdc_div: %d, phy_mask: %x\n", -+ __func__, priv->mdc_div, bus->phy_mask); -+ rc = mdiobus_register(bus); + if (rc) { -+ netdev_err(priv->ndev, "mdiobus_register(%s) failed\n", -+ bus->name); -+ goto err1; ++ dev_err(bus->parent, "mdiobus_register(%s) failed\n", ++ bus->name); ++ goto err_mdioregister; + } + + priv->mii_bus = bus; -+ -+ /* For clause 45 we need to call get_phy_device() with it's -+ * 3rd argument as true and then register the phy device -+ * via phy_device_register() -+ */ -+ -+ if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) { -+ for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) { -+ phydev = get_phy_device(priv->mii_bus, -+ priv->einfo->phy_id + ii, true); -+ if (!phydev || IS_ERR(phydev)) { -+ rc = -EIO; -+ netdev_err(priv->ndev, "fail to get device\n"); -+ goto err1; -+ } -+ rc = phy_device_register(phydev); -+ if (rc) { -+ phy_device_free(phydev); -+ netdev_err(priv->ndev, -+ "phy_device_register() failed\n"); -+ goto err1; -+ } -+ } -+ } ++ pfe->mdio.mdio_priv[ii] = priv; + + pfe_eth_mdio_reset(bus); + + return 0; + -+err1: ++err_mdioregister: + mdiobus_free(bus); -+err0: ++err_mdioalloc: + return rc; +} + +/* pfe_eth_mdio_exit + */ -+static void pfe_eth_mdio_exit(struct mii_bus *bus) ++static void pfe_eth_mdio_exit(struct pfe *pfe, ++ int ii) +{ ++ struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[ii]; ++ struct mii_bus *bus = mdio_priv->mii_bus; ++ + if (!bus) + return; -+ -+ netif_info((struct pfe_eth_priv_s *)bus->priv, drv, ((struct -+ pfe_eth_priv_s *)(bus->priv))->ndev, "%s\n", __func__); -+ + mdiobus_unregister(bus); + mdiobus_free(bus); +} @@ -3390,6 +3683,10 @@ Signed-off-by: Biwen Li +#define SCFG_RGMIIPCR_SETSP_10M (0x00000002) +#define SCFG_RGMIIPCR_SETFD (0x00000001) + ++#define MDIOSELCR 0x484 ++#define MDIOSEL_SERDES 0x0 ++#define MDIOSEL_EXTPHY 0x80000000 ++ +static void pfe_set_rgmii_speed(struct phy_device *phydev) +{ + u32 rgmii_pcr; @@ -3471,6 +3768,19 @@ Signed-off-by: Biwen Li + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); ++ ++ /* Now, dump the details to the cdev. ++ * XXX: Locking would be required? (uniprocess arch) ++ * Or, maybe move it in spinlock above ++ */ ++ if (us && priv->einfo->gem_id < PFE_CDEV_ETH_COUNT) { ++ pr_debug("Changing link state from (%u) to (%u) for ID=(%u)\n", ++ link_states[priv->einfo->gem_id].state, ++ phydev->link, ++ priv->einfo->gem_id); ++ link_states[priv->einfo->gem_id].phy_id = priv->einfo->gem_id; ++ link_states[priv->einfo->gem_id].state = phydev->link; ++ } +} + +/* pfe_phy_exit @@ -3524,36 +3834,46 @@ Signed-off-by: Biwen Li + */ +static void ls1012a_configure_serdes(struct net_device *ndev) +{ -+ struct pfe_eth_priv_s *priv = pfe->eth.eth_priv[0]; ++ struct pfe_eth_priv_s *eth_priv = netdev_priv(ndev); ++ struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[eth_priv->id]; + int sgmii_2500 = 0; -+ struct mii_bus *bus = priv->mii_bus; ++ struct mii_bus *bus = mdio_priv->mii_bus; + u16 value = 0; + -+ if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) ++ if (eth_priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) + sgmii_2500 = 1; + -+ netif_info(priv, drv, ndev, "%s\n", __func__); ++ netif_info(eth_priv, drv, ndev, "%s\n", __func__); + /* PCS configuration done with corresponding GEMAC */ + -+ pfe_eth_mdio_read(bus, 0, 0); -+ pfe_eth_mdio_read(bus, 0, 1); ++ pfe_eth_mdio_read(bus, 0, MDIO_SGMII_CR); ++ pfe_eth_mdio_read(bus, 0, MDIO_SGMII_SR); ++ ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, SGMII_CR_RST); + -+ /*These settings taken from validtion team */ -+ pfe_eth_mdio_write(bus, 0, 0x0, 0x8000); + if (sgmii_2500) { -+ pfe_eth_mdio_write(bus, 0, 0x14, 0x9); -+ pfe_eth_mdio_write(bus, 0, 0x4, 0x4001); -+ pfe_eth_mdio_write(bus, 0, 0x12, 0xa120); -+ pfe_eth_mdio_write(bus, 0, 0x13, 0x7); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE, SGMII_SPEED_1GBPS ++ | SGMII_EN); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII, ++ SGMII_DEV_ABIL_ACK | SGMII_DEV_ABIL_SGMII); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0xa120); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x7); + /* Autonegotiation need to be disabled for 2.5G SGMII mode*/ -+ value = 0x0140; -+ pfe_eth_mdio_write(bus, 0, 0x0, value); ++ value = SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G; ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value); + } else { -+ pfe_eth_mdio_write(bus, 0, 0x14, 0xb); -+ pfe_eth_mdio_write(bus, 0, 0x4, 0x1a1); -+ pfe_eth_mdio_write(bus, 0, 0x12, 0x400); -+ pfe_eth_mdio_write(bus, 0, 0x13, 0x0); -+ pfe_eth_mdio_write(bus, 0, 0x0, 0x1140); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE, ++ SGMII_SPEED_1GBPS ++ | SGMII_USE_SGMII_AN ++ | SGMII_EN); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII, ++ SGMII_DEV_ABIL_EEE_CLK_STP_EN ++ | 0xa0 ++ | SGMII_DEV_ABIL_SGMII); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0x400); ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x0); ++ value = SGMII_CR_AN_EN | SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G; ++ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value); + } +} + @@ -3576,33 +3896,44 @@ Signed-off-by: Biwen Li + snprintf(bus_id, MII_BUS_ID_SIZE, "ls1012a-%d", 0); + snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, + priv->einfo->phy_id); -+ + netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id); + interface = priv->einfo->mii_config; + if ((interface == PHY_INTERFACE_MODE_SGMII) || + (interface == PHY_INTERFACE_MODE_2500SGMII)) { + /*Configure SGMII PCS */ + if (pfe->scfg) { -+ /*Config MDIO from serdes */ -+ regmap_write(pfe->scfg, 0x484, 0x00000000); ++ /* Config MDIO from serdes */ ++ regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_SERDES); + } + ls1012a_configure_serdes(ndev); + } + + if (pfe->scfg) { + /*Config MDIO from PAD */ -+ regmap_write(pfe->scfg, 0x484, 0x80000000); ++ regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_EXTPHY); + } + + priv->oldlink = 0; + priv->oldspeed = 0; + priv->oldduplex = -1; + pr_info("%s interface %x\n", __func__, interface); -+ phydev = phy_connect(ndev, phy_id, &pfe_eth_adjust_link, interface); + -+ if (IS_ERR(phydev)) { -+ netdev_err(ndev, "phy_connect() failed\n"); -+ return PTR_ERR(phydev); ++ if (priv->phy_node) { ++ phydev = of_phy_connect(ndev, priv->phy_node, ++ pfe_eth_adjust_link, 0, ++ priv->einfo->mii_config); ++ if (!(phydev)) { ++ netdev_err(ndev, "Unable to connect to phy\n"); ++ return -ENODEV; ++ } ++ ++ } else { ++ phydev = phy_connect(ndev, phy_id, ++ &pfe_eth_adjust_link, interface); ++ if (IS_ERR(phydev)) { ++ netdev_err(ndev, "Unable to connect to phy\n"); ++ return PTR_ERR(phydev); ++ } + } + + priv->phydev = phydev; @@ -4616,26 +4947,15 @@ Signed-off-by: Biwen Li + +/* pfe_eth_init_one + */ -+static int pfe_eth_init_one(struct pfe *pfe, int id) ++static int pfe_eth_init_one(struct pfe *pfe, ++ struct ls1012a_pfe_platform_data *pfe_info, ++ int id) +{ + struct net_device *ndev = NULL; + struct pfe_eth_priv_s *priv = NULL; + struct ls1012a_eth_platform_data *einfo; -+ struct ls1012a_mdio_platform_data *minfo; -+ struct ls1012a_pfe_platform_data *pfe_info; + int err; + -+ /* Extract pltform data */ -+ pfe_info = (struct ls1012a_pfe_platform_data *) -+ pfe->dev->platform_data; -+ if (!pfe_info) { -+ pr_err( -+ "%s: pfe missing additional platform data\n" -+ , __func__); -+ err = -ENODEV; -+ goto err0; -+ } -+ + einfo = (struct ls1012a_eth_platform_data *) + pfe_info->ls1012a_eth_pdata; + @@ -4648,18 +4968,6 @@ Signed-off-by: Biwen Li + goto err0; + } + -+ minfo = (struct ls1012a_mdio_platform_data *) -+ pfe_info->ls1012a_mdio_pdata; -+ -+ /* einfo never be NULL, but no harm in having this check */ -+ if (!minfo) { -+ pr_err( -+ "%s: pfe missing additional mdios platform data\n", -+ __func__); -+ err = -ENODEV; -+ goto err0; -+ } -+ + if (us) + emac_txq_cnt = EMAC_TXQ_CNT; + /* Create an ethernet device instance */ @@ -4676,6 +4984,7 @@ Signed-off-by: Biwen Li + priv->ndev = ndev; + priv->id = einfo[id].gem_id; + priv->pfe = pfe; ++ priv->phy_node = einfo[id].phy_node; + + SET_NETDEV_DEV(priv->ndev, priv->pfe->dev); + @@ -4684,13 +4993,8 @@ Signed-off-by: Biwen Li + /* Set the info in the priv to the current info */ + priv->einfo = &einfo[id]; + priv->EMAC_baseaddr = cbus_emac_base[id]; -+ priv->PHY_baseaddr = cbus_emac_base[0]; + priv->GPI_baseaddr = cbus_gpi_base[id]; + -+#define HIF_GEMAC_TMUQ_BASE 6 -+ priv->low_tmu_q = HIF_GEMAC_TMUQ_BASE + (id * 2); -+ priv->high_tmu_q = priv->low_tmu_q + 1; -+ + spin_lock_init(&priv->lock); + + pfe_eth_fast_tx_timeout_init(priv); @@ -4698,16 +5002,6 @@ Signed-off-by: Biwen Li + /* Copy the station address into the dev structure, */ + memcpy(ndev->dev_addr, einfo[id].mac_addr, ETH_ALEN); + -+ /* Initialize mdio */ -+ if (minfo[id].enabled) { -+ err = pfe_eth_mdio_init(priv, &minfo[id]); -+ if (err) { -+ netdev_err(ndev, "%s: pfe_eth_mdio_init() failed\n", -+ __func__); -+ goto err2; -+ } -+ } -+ + if (us) + goto phy_init; + @@ -4725,9 +5019,6 @@ Signed-off-by: Biwen Li + else + ndev->max_mtu = JUMBO_FRAME_SIZE_V2 - ETH_HLEN - ETH_FCS_LEN; + -+ /* supported features */ -+ ndev->hw_features = NETIF_F_SG; -+ + /*Enable after checksum offload is validated */ + ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | NETIF_F_SG; @@ -4753,22 +5044,26 @@ Signed-off-by: Biwen Li + HIF_RX_POLL_WEIGHT - 16); + + err = register_netdev(ndev); -+ + if (err) { + netdev_err(ndev, "register_netdev() failed\n"); -+ goto err3; ++ goto err1; ++ } ++ ++ if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) || ++ ((pfe_use_old_dts_phy) && ++ (priv->einfo->phy_flags & GEMAC_NO_PHY))) { ++ pr_info("%s: No PHY or fixed-link\n", __func__); ++ goto skip_phy_init; + } + +phy_init: + device_init_wakeup(&ndev->dev, WAKE_MAGIC); + -+ if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) { -+ err = pfe_phy_init(ndev); -+ if (err) { -+ netdev_err(ndev, "%s: pfe_phy_init() failed\n", -+ __func__); -+ goto err4; -+ } ++ err = pfe_phy_init(ndev); ++ if (err) { ++ netdev_err(ndev, "%s: pfe_phy_init() failed\n", ++ __func__); ++ goto err2; + } + + if (us) { @@ -4779,21 +5074,23 @@ Signed-off-by: Biwen Li + + netif_carrier_on(ndev); + ++skip_phy_init: + /* Create all the sysfs files */ + if (pfe_eth_sysfs_init(ndev)) -+ goto err4; ++ goto err3; + + netif_info(priv, probe, ndev, "%s: created interface, baseaddr: %p\n", + __func__, priv->EMAC_baseaddr); + + return 0; -+err4: -+ if (us) -+ goto err3; -+ unregister_netdev(ndev); ++ +err3: -+ pfe_eth_mdio_exit(priv->mii_bus); ++ pfe_phy_exit(priv->ndev); +err2: ++ if (us) ++ goto err1; ++ unregister_netdev(ndev); ++err1: + free_netdev(priv->ndev); +err0: + return err; @@ -4805,6 +5102,7 @@ Signed-off-by: Biwen Li +{ + int ii = 0; + int err; ++ struct ls1012a_pfe_platform_data *pfe_info; + + pr_info("%s\n", __func__); + @@ -4814,24 +5112,43 @@ Signed-off-by: Biwen Li + cbus_gpi_base[0] = EGPI1_BASE_ADDR; + cbus_gpi_base[1] = EGPI2_BASE_ADDR; + ++ pfe_info = (struct ls1012a_pfe_platform_data *) ++ pfe->dev->platform_data; ++ if (!pfe_info) { ++ pr_err("%s: pfe missing additional platform data\n", __func__); ++ err = -ENODEV; ++ goto err_pdata; ++ } ++ ++ for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) { ++ err = pfe_eth_mdio_init(pfe, pfe_info, ii); ++ if (err) { ++ pr_err("%s: pfe_eth_mdio_init() failed\n", __func__); ++ goto err_mdio_init; ++ } ++ } ++ + if (fsl_guts_get_svr() == LS1012A_REV_1_0) + pfe_errata_a010897 = true; + else + pfe_errata_a010897 = false; + + for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) { -+ err = pfe_eth_init_one(pfe, ii); ++ err = pfe_eth_init_one(pfe, pfe_info, ii); + if (err) -+ goto err0; ++ goto err_eth_init; + } + + return 0; + -+err0: -+ while (ii--) ++err_eth_init: ++ while (ii--) { + pfe_eth_exit_one(pfe->eth.eth_priv[ii]); ++ pfe_eth_mdio_exit(pfe, ii); ++ } + -+ /* Register three network devices in the kernel */ ++err_mdio_init: ++err_pdata: + return err; +} + @@ -4844,15 +5161,19 @@ Signed-off-by: Biwen Li + if (!us) + pfe_eth_sysfs_exit(priv->ndev); + -+ if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) -+ pfe_phy_exit(priv->ndev); ++ if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) || ++ ((pfe_use_old_dts_phy) && ++ (priv->einfo->phy_flags & GEMAC_NO_PHY))) { ++ pr_info("%s: No PHY or fixed-link\n", __func__); ++ goto skip_phy_exit; ++ } ++ ++ pfe_phy_exit(priv->ndev); + ++skip_phy_exit: + if (!us) + unregister_netdev(priv->ndev); + -+ if (priv->mii_bus) -+ pfe_eth_mdio_exit(priv->mii_bus); -+ + free_netdev(priv->ndev); +} + @@ -4866,26 +5187,17 @@ Signed-off-by: Biwen Li + + for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--) + pfe_eth_exit_one(pfe->eth.eth_priv[ii]); ++ ++ for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--) ++ pfe_eth_mdio_exit(pfe, ii); +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_eth.h -@@ -0,0 +1,185 @@ +@@ -0,0 +1,175 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . ++ * Copyright 2015-2016 Freescale Semiconductor, Inc. ++ * Copyright 2017 NXP + */ + +#ifndef _PFE_ETH_H_ @@ -4921,22 +5233,18 @@ Signed-off-by: Biwen Li +#define GEMAC_NO_PHY BIT(0) + +struct ls1012a_eth_platform_data { -+ /* device specific information */ -+ u32 device_flags; -+ char name[16]; -+ + /* board specific information */ + u32 mii_config; + u32 phy_flags; + u32 gem_id; -+ u32 bus_id; + u32 phy_id; + u32 mdio_muxval; + u8 mac_addr[ETH_ALEN]; ++ struct device_node *phy_node; +}; + +struct ls1012a_mdio_platform_data { -+ int enabled; ++ int id; + int irq[32]; + u32 phy_mask; + int mdc_div; @@ -5008,17 +5316,13 @@ Signed-off-by: Biwen Li + unsigned int event_status; + int irq; + void *EMAC_baseaddr; -+ /* This points to the EMAC base from where we access PHY */ -+ void *PHY_baseaddr; + void *GPI_baseaddr; + /* PHY stuff */ + struct phy_device *phydev; + int oldspeed; + int oldduplex; + int oldlink; -+ /* mdio info */ -+ int mdc_div; -+ struct mii_bus *mii_bus; ++ struct device_node *phy_node; + struct clk *gemtx_clk; + int wol; + int pause_flag; @@ -5048,6 +5352,16 @@ Signed-off-by: Biwen Li + struct pfe_eth_priv_s *eth_priv[3]; +}; + ++struct pfe_mdio_priv_s { ++ void __iomem *mdio_base; ++ int mdc_div; ++ struct mii_bus *mii_bus; ++}; ++ ++struct pfe_mdio { ++ struct pfe_mdio_priv_s *mdio_priv[3]; ++}; ++ +int pfe_eth_init(struct pfe *pfe); +void pfe_eth_exit(struct pfe *pfe); +int pfe_eth_suspend(struct net_device *dev); @@ -5057,23 +5371,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_ETH_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_firmware.c -@@ -0,0 +1,314 @@ +@@ -0,0 +1,302 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +/* @@ -5374,23 +5676,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_firmware.h -@@ -0,0 +1,32 @@ +@@ -0,0 +1,20 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_FIRMWARE_H_ @@ -5409,23 +5699,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_FIRMWARE_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_hal.c -@@ -0,0 +1,1528 @@ +@@ -0,0 +1,1516 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include "pfe_mod.h" @@ -6940,23 +7218,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_hif.c -@@ -0,0 +1,1072 @@ +@@ -0,0 +1,1060 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include @@ -8015,23 +8281,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_hif.h -@@ -0,0 +1,212 @@ +@@ -0,0 +1,200 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_HIF_H_ @@ -8230,23 +8484,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_HIF_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c -@@ -0,0 +1,640 @@ +@@ -0,0 +1,628 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include @@ -8873,23 +9115,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h -@@ -0,0 +1,241 @@ +@@ -0,0 +1,229 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_HIF_LIB_H_ @@ -9117,23 +9347,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_HIF_LIB_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_hw.c -@@ -0,0 +1,176 @@ +@@ -0,0 +1,164 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include "pfe_mod.h" @@ -9296,23 +9514,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_hw.h -@@ -0,0 +1,27 @@ +@@ -0,0 +1,15 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_HW_H_ @@ -9326,29 +9532,19 @@ Signed-off-by: Biwen Li +#endif /* _PFE_HW_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c -@@ -0,0 +1,385 @@ +@@ -0,0 +1,368 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include +#include ++#include +#include +#include ++#include +#include +#include +#include @@ -9357,102 +9553,90 @@ Signed-off-by: Biwen Li + +#include "pfe_mod.h" + ++extern bool pfe_use_old_dts_phy; +struct ls1012a_pfe_platform_data pfe_platform_data; + -+static int pfe_get_gemac_if_proprties(struct device_node *parent, int port, int -+ if_cnt, -+ struct ls1012a_pfe_platform_data -+ *pdata) ++static int pfe_get_gemac_if_properties(struct device_node *gem, ++ int port, ++ struct ls1012a_pfe_platform_data *pdata) +{ -+ struct device_node *gem = NULL, *phy = NULL; ++ struct device_node *phy_node = NULL; + int size; -+ int ii = 0, phy_id = 0; ++ int phy_id = 0; + const u32 *addr; + const void *mac_addr; + -+ for (ii = 0; ii < if_cnt; ii++) { -+ gem = of_get_next_child(parent, gem); -+ if (!gem) -+ goto err; -+ addr = of_get_property(gem, "reg", &size); -+ if (addr && (be32_to_cpup(addr) == port)) -+ break; -+ } -+ -+ if (ii >= if_cnt) { -+ pr_err("%s:%d Failed to find interface = %d\n", -+ __func__, __LINE__, if_cnt); -+ goto err; -+ } ++ addr = of_get_property(gem, "reg", &size); ++ port = be32_to_cpup(addr); + + pdata->ls1012a_eth_pdata[port].gem_id = port; + + mac_addr = of_get_mac_address(gem); -+ + if (mac_addr) { + memcpy(pdata->ls1012a_eth_pdata[port].mac_addr, mac_addr, + ETH_ALEN); + } + -+ pdata->ls1012a_eth_pdata[port].mii_config = of_get_phy_mode(gem); ++ phy_node = of_parse_phandle(gem, "phy-handle", 0); ++ pdata->ls1012a_eth_pdata[port].phy_node = phy_node; ++ if (phy_node) { ++ pfe_use_old_dts_phy = false; ++ goto process_phynode; ++ } else if (of_phy_is_fixed_link(gem)) { ++ pfe_use_old_dts_phy = false; ++ if (of_phy_register_fixed_link(gem) < 0) { ++ pr_err("broken fixed-link specification\n"); ++ goto err; ++ } ++ phy_node = of_node_get(gem); ++ pdata->ls1012a_eth_pdata[port].phy_node = phy_node; ++ } else if (of_get_property(gem, "fsl,pfe-phy-if-flags", &size)) { ++ pfe_use_old_dts_phy = true; ++ /* Use old dts properties for phy handling */ ++ addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size); ++ pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr); + -+ if ((pdata->ls1012a_eth_pdata[port].mii_config) < 0) -+ pr_err("%s:%d Incorrect Phy mode....\n", __func__, -+ __LINE__); ++ addr = of_get_property(gem, "fsl,gemac-phy-id", &size); ++ if (!addr) { ++ pr_err("%s:%d Invalid gemac-phy-id....\n", __func__, ++ __LINE__); ++ } else { ++ phy_id = be32_to_cpup(addr); ++ pdata->ls1012a_eth_pdata[port].phy_id = phy_id; ++ pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id); ++ } + -+ addr = of_get_property(gem, "fsl,gemac-bus-id", &size); -+ if (!addr) -+ pr_err("%s:%d Invalid gemac-bus-id....\n", __func__, -+ __LINE__); -+ else -+ pdata->ls1012a_eth_pdata[port].bus_id = be32_to_cpup(addr); ++ /* If PHY is enabled, read mdio properties */ ++ if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY) ++ goto done; + -+ addr = of_get_property(gem, "fsl,gemac-phy-id", &size); -+ if (!addr) { -+ pr_err("%s:%d Invalid gemac-phy-id....\n", __func__, -+ __LINE__); + } else { -+ phy_id = be32_to_cpup(addr); -+ pdata->ls1012a_eth_pdata[port].phy_id = phy_id; -+ pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id); ++ pr_info("%s: No PHY or fixed-link\n", __func__); ++ return 0; + } + ++process_phynode: ++ pdata->ls1012a_eth_pdata[port].mii_config = of_get_phy_mode(gem); ++ if ((pdata->ls1012a_eth_pdata[port].mii_config) < 0) ++ pr_err("%s:%d Incorrect Phy mode....\n", __func__, ++ __LINE__); ++ + addr = of_get_property(gem, "fsl,mdio-mux-val", &size); -+ if (!addr) ++ if (!addr) { + pr_err("%s: Invalid mdio-mux-val....\n", __func__); -+ else ++ } else { + phy_id = be32_to_cpup(addr); + pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id; ++ } + + if (pdata->ls1012a_eth_pdata[port].phy_id < 32) + pfe->mdio_muxval[pdata->ls1012a_eth_pdata[port].phy_id] = + pdata->ls1012a_eth_pdata[port].mdio_muxval; + -+ addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size); -+ if (!addr) -+ pr_err("%s:%d Invalid pfe-phy-if-flags....\n", -+ __func__, __LINE__); -+ else -+ pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr); -+ -+ /* If PHY is enabled, read mdio properties */ -+ if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY) -+ goto done; -+ -+ phy = of_get_next_child(gem, NULL); -+ -+ addr = of_get_property(phy, "reg", &size); -+ -+ if (!addr) -+ pr_err("%s:%d Invalid phy enable flag....\n", -+ __func__, __LINE__); -+ else -+ pdata->ls1012a_mdio_pdata[port].enabled = be32_to_cpup(addr); + + pdata->ls1012a_mdio_pdata[port].irq[0] = PHY_POLL; + +done: -+ + return 0; + +err: @@ -9470,7 +9654,7 @@ Signed-off-by: Biwen Li + struct resource res; + int ii, rc, interface_count = 0, size = 0; + const u32 *prop; -+ struct device_node *np; ++ struct device_node *np, *gem = NULL; + struct clk *pfe_clk; + + np = pdev->dev.of_node; @@ -9548,8 +9732,13 @@ Signed-off-by: Biwen Li + pfe_platform_data.ls1012a_mdio_pdata[0].phy_mask = 0xffffffff; + + for (ii = 0; ii < interface_count; ii++) { -+ pfe_get_gemac_if_proprties(np, ii, interface_count, -+ &pfe_platform_data); ++ gem = of_get_next_child(np, gem); ++ if (gem) ++ pfe_get_gemac_if_properties(gem, ii, ++ &pfe_platform_data); ++ else ++ pr_err("Unable to find interface %d\n", ii); ++ + } + + pfe->dev = &pdev->dev; @@ -9668,8 +9857,8 @@ Signed-off-by: Biwen Li + for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) { + netdev = pfe->eth.eth_priv[i]->ndev; + -+ if (pfe->eth.eth_priv[i]->mii_bus) -+ pfe_eth_mdio_reset(pfe->eth.eth_priv[i]->mii_bus); ++ if (pfe->mdio.mdio_priv[i]->mii_bus) ++ pfe_eth_mdio_reset(pfe->mdio.mdio_priv[i]->mii_bus); + + if (netif_running(netdev)) + pfe_eth_resume(netdev); @@ -9714,27 +9903,16 @@ Signed-off-by: Biwen Li +MODULE_AUTHOR("NXP DNCPE"); --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_mod.c -@@ -0,0 +1,156 @@ +@@ -0,0 +1,158 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include +#include "pfe_mod.h" ++#include "pfe_cdev.h" + +unsigned int us; +module_param(us, uint, 0444); @@ -9809,8 +9987,18 @@ Signed-off-by: Biwen Li + if (rc < 0) + goto err_debugfs; + ++ if (us) { ++ /* Creating a character device */ ++ rc = pfe_cdev_init(); ++ if (rc < 0) ++ goto err_cdev; ++ } ++ + return 0; + ++err_cdev: ++ pfe_debugfs_exit(pfe); ++ +err_debugfs: + pfe_sysfs_exit(pfe); + @@ -9846,6 +10034,9 @@ Signed-off-by: Biwen Li +{ + pr_info("%s\n", __func__); + ++ if (us) ++ pfe_cdev_exit(); ++ + pfe_debugfs_exit(pfe); + + pfe_sysfs_exit(pfe); @@ -9873,23 +10064,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_mod.h -@@ -0,0 +1,114 @@ +@@ -0,0 +1,103 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_MOD_H_ @@ -9940,6 +10119,7 @@ Signed-off-by: Biwen Li + struct pfe_ctrl ctrl; + struct pfe_hif hif; + struct pfe_eth eth; ++ struct pfe_mdio mdio; + struct hif_client_s *hif_client[HIF_CLIENTS_MAX]; +#if defined(CFG_DIAGS) + struct pfe_diags diags; @@ -9990,23 +10170,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_MOD_H */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_perfmon.h -@@ -0,0 +1,38 @@ +@@ -0,0 +1,26 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_PERFMON_H_ @@ -10031,23 +10199,11 @@ Signed-off-by: Biwen Li +#endif /* _PFE_PERFMON_H_ */ --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c -@@ -0,0 +1,818 @@ +@@ -0,0 +1,806 @@ ++// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#include @@ -10852,23 +11008,11 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/staging/fsl_ppfe/pfe_sysfs.h -@@ -0,0 +1,29 @@ +@@ -0,0 +1,17 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . + */ + +#ifndef _PFE_SYSFS_H_ diff --git a/target/linux/layerscape/patches-4.14/711-dpaa-bqman-support-layerscape.patch b/target/linux/layerscape/patches-4.14/711-dpaa-bqman-support-layerscape.patch index 7946d3cbc1..715cfe0875 100644 --- a/target/linux/layerscape/patches-4.14/711-dpaa-bqman-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/711-dpaa-bqman-support-layerscape.patch @@ -1,28 +1,32 @@ -From 48dbe4b3a31795b8efdfff82f69eccd086052eed Mon Sep 17 00:00:00 2001 +From 371e99a257cb714f9a6027d6571cb1a43855d926 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Fri, 16 Nov 2018 10:27:30 +0800 -Subject: [PATCH 16/39] dpaa-bqman: support layerscape +Date: Wed, 17 Apr 2019 18:58:24 +0800 +Subject: [PATCH] dpaa-bqman: support layerscape + This is an integrated patch of dpaa-bqman for layerscape +Signed-off-by: Biwen Li Signed-off-by: Claudiu Manoil +Signed-off-by: Laurentiu Tudor Signed-off-by: Madalin Bucur Signed-off-by: Roy Pledge Signed-off-by: Stuart Yoder Signed-off-by: Valentin Rothberg -Signed-off-by: Biwen Li --- drivers/soc/fsl/qbman/Kconfig | 2 +- - drivers/soc/fsl/qbman/bman.c | 24 ++++- - drivers/soc/fsl/qbman/bman_ccsr.c | 35 ++++++- - drivers/soc/fsl/qbman/bman_portal.c | 12 ++- + drivers/soc/fsl/qbman/bman.c | 24 +++- + drivers/soc/fsl/qbman/bman_ccsr.c | 57 +++++++++- + drivers/soc/fsl/qbman/bman_portal.c | 44 ++++++-- drivers/soc/fsl/qbman/bman_priv.h | 3 + drivers/soc/fsl/qbman/dpaa_sys.h | 8 +- - drivers/soc/fsl/qbman/qman.c | 46 ++++++++- - drivers/soc/fsl/qbman/qman_ccsr.c | 140 ++++++++++++++++++++++------ - drivers/soc/fsl/qbman/qman_portal.c | 12 ++- + drivers/soc/fsl/qbman/qman.c | 46 +++++++- + drivers/soc/fsl/qbman/qman_ccsr.c | 168 +++++++++++++++++++++++----- + drivers/soc/fsl/qbman/qman_portal.c | 60 ++++++++-- drivers/soc/fsl/qbman/qman_priv.h | 5 +- drivers/soc/fsl/qbman/qman_test.h | 2 - - 11 files changed, 236 insertions(+), 53 deletions(-) + include/soc/fsl/bman.h | 16 +++ + include/soc/fsl/qman.h | 17 +++ + 13 files changed, 390 insertions(+), 62 deletions(-) --- a/drivers/soc/fsl/qbman/Kconfig +++ b/drivers/soc/fsl/qbman/Kconfig @@ -83,20 +87,49 @@ Signed-off-by: Biwen Li return 0; --- a/drivers/soc/fsl/qbman/bman_ccsr.c +++ b/drivers/soc/fsl/qbman/bman_ccsr.c -@@ -170,10 +170,11 @@ static int fsl_bman_probe(struct platfor +@@ -29,6 +29,7 @@ + */ + + #include "bman_priv.h" ++#include + + u16 bman_ip_rev; + EXPORT_SYMBOL(bman_ip_rev); +@@ -120,6 +121,7 @@ static void bm_set_memory(u64 ba, u32 si + */ + static dma_addr_t fbpr_a; + static size_t fbpr_sz; ++static int __bman_probed; + + static int bman_fbpr(struct reserved_mem *rmem) + { +@@ -166,14 +168,24 @@ static irqreturn_t bman_isr(int irq, voi + return IRQ_HANDLED; + } + ++int bman_is_probed(void) ++{ ++ return __bman_probed; ++} ++EXPORT_SYMBOL_GPL(bman_is_probed); ++ + static int fsl_bman_probe(struct platform_device *pdev) { int ret, err_irq; struct device *dev = &pdev->dev; - struct device_node *node = dev->of_node; + struct device_node *mem_node, *node = dev->of_node; ++ struct iommu_domain *domain; struct resource *res; u16 id, bm_pool_cnt; u8 major, minor; + u64 size; ++ ++ __bman_probed = -1; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { -@@ -201,6 +202,38 @@ static int fsl_bman_probe(struct platfor +@@ -201,6 +213,47 @@ static int fsl_bman_probe(struct platfor return -ENODEV; } @@ -131,13 +164,98 @@ Signed-off-by: Biwen Li + } + + dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz); ++ ++ /* Create an 1-to-1 iommu mapping for FBPR area */ ++ domain = iommu_get_domain_for_dev(dev); ++ if (domain) { ++ ret = iommu_map(domain, fbpr_a, fbpr_a, PAGE_ALIGN(fbpr_sz), ++ IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE); ++ if (ret) ++ dev_warn(dev, "failed to iommu_map() %d\n", ret); ++ } + bm_set_memory(fbpr_a, fbpr_sz); err_irq = platform_get_irq(pdev, 0); +@@ -240,6 +293,8 @@ static int fsl_bman_probe(struct platfor + return ret; + } + ++ __bman_probed = 1; ++ + return 0; + }; + --- a/drivers/soc/fsl/qbman/bman_portal.c +++ b/drivers/soc/fsl/qbman/bman_portal.c -@@ -123,7 +123,14 @@ static int bman_portal_probe(struct plat +@@ -32,6 +32,7 @@ + + static struct bman_portal *affine_bportals[NR_CPUS]; + static struct cpumask portal_cpus; ++static int __bman_portals_probed; + /* protect bman global registers and global data shared among portals */ + static DEFINE_SPINLOCK(bman_lock); + +@@ -85,6 +86,12 @@ static int bman_online_cpu(unsigned int + return 0; + } + ++int bman_portals_probed(void) ++{ ++ return __bman_portals_probed; ++} ++EXPORT_SYMBOL_GPL(bman_portals_probed); ++ + static int bman_portal_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; +@@ -92,11 +99,21 @@ static int bman_portal_probe(struct plat + struct bm_portal_config *pcfg; + struct resource *addr_phys[2]; + void __iomem *va; +- int irq, cpu; ++ int irq, cpu, err; ++ ++ err = bman_is_probed(); ++ if (!err) ++ return -EPROBE_DEFER; ++ if (err < 0) { ++ dev_err(&pdev->dev, "failing probe due to bman probe error\n"); ++ return -ENODEV; ++ } + + pcfg = devm_kmalloc(dev, sizeof(*pcfg), GFP_KERNEL); +- if (!pcfg) ++ if (!pcfg) { ++ __bman_portals_probed = -1; + return -ENOMEM; ++ } + + pcfg->dev = dev; + +@@ -104,14 +121,14 @@ static int bman_portal_probe(struct plat + DPAA_PORTAL_CE); + if (!addr_phys[0]) { + dev_err(dev, "Can't get %pOF property 'reg::CE'\n", node); +- return -ENXIO; ++ goto err_ioremap1; + } + + addr_phys[1] = platform_get_resource(pdev, IORESOURCE_MEM, + DPAA_PORTAL_CI); + if (!addr_phys[1]) { + dev_err(dev, "Can't get %pOF property 'reg::CI'\n", node); +- return -ENXIO; ++ goto err_ioremap1; + } + + pcfg->cpu = -1; +@@ -119,11 +136,18 @@ static int bman_portal_probe(struct plat + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "Can't get %pOF IRQ'\n", node); +- return -ENXIO; ++ goto err_ioremap1; } pcfg->irq = irq; @@ -153,7 +271,7 @@ Signed-off-by: Biwen Li if (!va) { dev_err(dev, "ioremap::CE failed\n"); goto err_ioremap1; -@@ -131,8 +138,7 @@ static int bman_portal_probe(struct plat +@@ -131,8 +155,7 @@ static int bman_portal_probe(struct plat pcfg->addr_virt[DPAA_PORTAL_CE] = va; @@ -163,6 +281,25 @@ Signed-off-by: Biwen Li if (!va) { dev_err(dev, "ioremap::CI failed\n"); goto err_ioremap2; +@@ -149,6 +172,9 @@ static int bman_portal_probe(struct plat + } + + cpumask_set_cpu(cpu, &portal_cpus); ++ if (!__bman_portals_probed && ++ cpumask_weight(&portal_cpus) == num_online_cpus()) ++ __bman_portals_probed = 1; + spin_unlock(&bman_lock); + pcfg->cpu = cpu; + +@@ -168,6 +194,8 @@ err_portal_init: + err_ioremap2: + iounmap(pcfg->addr_virt[DPAA_PORTAL_CE]); + err_ioremap1: ++ __bman_portals_probed = -1; ++ + return -ENXIO; + } + --- a/drivers/soc/fsl/qbman/bman_priv.h +++ b/drivers/soc/fsl/qbman/bman_priv.h @@ -33,6 +33,9 @@ @@ -290,7 +427,23 @@ Signed-off-by: Biwen Li /* --- a/drivers/soc/fsl/qbman/qman_ccsr.c +++ b/drivers/soc/fsl/qbman/qman_ccsr.c -@@ -401,21 +401,42 @@ static int qm_init_pfdr(struct device *d +@@ -29,6 +29,7 @@ + */ + + #include "qman_priv.h" ++#include + + u16 qman_ip_rev; + EXPORT_SYMBOL(qman_ip_rev); +@@ -273,6 +274,7 @@ static const struct qman_error_info_mdat + static u32 __iomem *qm_ccsr_start; + /* A SDQCR mask comprising all the available/visible pool channels */ + static u32 qm_pools_sdqcr; ++static int __qman_probed; + + static inline u32 qm_ccsr_in(u32 offset) + { +@@ -401,21 +403,42 @@ static int qm_init_pfdr(struct device *d } /* @@ -338,7 +491,7 @@ Signed-off-by: Biwen Li return 0; } RESERVEDMEM_OF_DECLARE(qman_fqd, "fsl,qman-fqd", qman_fqd); -@@ -431,32 +452,13 @@ static int qman_pfdr(struct reserved_mem +@@ -431,32 +454,13 @@ static int qman_pfdr(struct reserved_mem } RESERVEDMEM_OF_DECLARE(qman_pfdr, "fsl,qman-pfdr", qman_pfdr); @@ -373,21 +526,49 @@ Signed-off-by: Biwen Li static void log_edata_bits(struct device *dev, u32 bit_count) { u32 i, j, mask = 0xffffffff; -@@ -687,11 +689,12 @@ static int qman_resource_init(struct dev +@@ -595,6 +599,7 @@ static int qman_init_ccsr(struct device + #define LIO_CFG_LIODN_MASK 0x0fff0000 + void qman_liodn_fixup(u16 channel) + { ++#ifdef CONFIG_PPC + static int done; + static u32 liodn_offset; + u32 before, after; +@@ -614,6 +619,7 @@ void qman_liodn_fixup(u16 channel) + qm_ccsr_out(REG_REV3_QCSP_LIO_CFG(idx), after); + else + qm_ccsr_out(REG_QCSP_LIO_CFG(idx), after); ++#endif + } + + #define IO_CFG_SDEST_MASK 0x00ff0000 +@@ -684,14 +690,24 @@ static int qman_resource_init(struct dev + return 0; + } + ++int qman_is_probed(void) ++{ ++ return __qman_probed; ++} ++EXPORT_SYMBOL_GPL(qman_is_probed); ++ static int fsl_qman_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct device_node *node = dev->of_node; + struct device_node *mem_node, *node = dev->of_node; ++ struct iommu_domain *domain; struct resource *res; int ret, err_irq; u16 id; u8 major, minor; + u64 size; ++ ++ __qman_probed = -1; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { -@@ -717,6 +720,8 @@ static int fsl_qman_probe(struct platfor +@@ -717,6 +733,8 @@ static int fsl_qman_probe(struct platfor qman_ip_rev = QMAN_REV30; else if (major == 3 && minor == 1) qman_ip_rev = QMAN_REV31; @@ -396,7 +577,7 @@ Signed-off-by: Biwen Li else { dev_err(dev, "Unknown QMan version\n"); return -ENODEV; -@@ -727,10 +732,83 @@ static int fsl_qman_probe(struct platfor +@@ -727,10 +745,96 @@ static int fsl_qman_probe(struct platfor qm_channel_caam = QMAN_CHANNEL_CAAM_REV3; } @@ -481,12 +662,116 @@ Signed-off-by: Biwen Li + } + } + dev_info(dev, "Allocated PFDR 0x%llx 0x%zx\n", pfdr_a, pfdr_sz); ++ ++ /* Create an 1-to-1 iommu mapping for fqd and pfdr areas */ ++ domain = iommu_get_domain_for_dev(dev); ++ if (domain) { ++ ret = iommu_map(domain, fqd_a, fqd_a, PAGE_ALIGN(fqd_sz), ++ IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE); ++ if (ret) ++ dev_warn(dev, "iommu_map(fqd) failed %d\n", ret); ++ ret = iommu_map(domain, pfdr_a, pfdr_a, PAGE_ALIGN(pfdr_sz), ++ IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE); ++ if (ret) ++ dev_warn(dev, "iommu_map(pfdr) failed %d\n", ret); ++ } ret = qman_init_ccsr(dev); if (ret) { +@@ -793,6 +897,8 @@ static int fsl_qman_probe(struct platfor + if (ret) + return ret; + ++ __qman_probed = 1; ++ + return 0; + } + --- a/drivers/soc/fsl/qbman/qman_portal.c +++ b/drivers/soc/fsl/qbman/qman_portal.c -@@ -262,7 +262,14 @@ static int qman_portal_probe(struct plat +@@ -29,6 +29,7 @@ + */ + + #include "qman_priv.h" ++#include + + struct qman_portal *qman_dma_portal; + EXPORT_SYMBOL(qman_dma_portal); +@@ -38,6 +39,7 @@ EXPORT_SYMBOL(qman_dma_portal); + #define CONFIG_FSL_DPA_PIRQ_FAST 1 + + static struct cpumask portal_cpus; ++static int __qman_portals_probed; + /* protect qman global registers and global data shared among portals */ + static DEFINE_SPINLOCK(qman_lock); + +@@ -218,19 +220,36 @@ static int qman_online_cpu(unsigned int + return 0; + } + ++int qman_portals_probed(void) ++{ ++ return __qman_portals_probed; ++} ++EXPORT_SYMBOL_GPL(qman_portals_probed); ++ + static int qman_portal_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; ++ struct iommu_domain *domain; + struct qm_portal_config *pcfg; + struct resource *addr_phys[2]; + void __iomem *va; + int irq, cpu, err; + u32 val; + ++ err = qman_is_probed(); ++ if (!err) ++ return -EPROBE_DEFER; ++ if (err < 0) { ++ dev_err(&pdev->dev, "failing probe due to qman probe error\n"); ++ return -ENODEV; ++ } ++ + pcfg = devm_kmalloc(dev, sizeof(*pcfg), GFP_KERNEL); +- if (!pcfg) ++ if (!pcfg) { ++ __qman_portals_probed = -1; + return -ENOMEM; ++ } + + pcfg->dev = dev; + +@@ -238,19 +257,20 @@ static int qman_portal_probe(struct plat + DPAA_PORTAL_CE); + if (!addr_phys[0]) { + dev_err(dev, "Can't get %pOF property 'reg::CE'\n", node); +- return -ENXIO; ++ goto err_ioremap1; + } + + addr_phys[1] = platform_get_resource(pdev, IORESOURCE_MEM, + DPAA_PORTAL_CI); + if (!addr_phys[1]) { + dev_err(dev, "Can't get %pOF property 'reg::CI'\n", node); +- return -ENXIO; ++ goto err_ioremap1; + } + + err = of_property_read_u32(node, "cell-index", &val); + if (err) { + dev_err(dev, "Can't get %pOF property 'cell-index'\n", node); ++ __qman_portals_probed = -1; + return err; + } + pcfg->channel = val; +@@ -258,11 +278,18 @@ static int qman_portal_probe(struct plat + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "Can't get %pOF IRQ\n", node); +- return -ENXIO; ++ goto err_ioremap1; } pcfg->irq = irq; @@ -502,7 +787,7 @@ Signed-off-by: Biwen Li if (!va) { dev_err(dev, "ioremap::CE failed\n"); goto err_ioremap1; -@@ -270,8 +277,7 @@ static int qman_portal_probe(struct plat +@@ -270,8 +297,7 @@ static int qman_portal_probe(struct plat pcfg->addr_virt[DPAA_PORTAL_CE] = va; @@ -512,6 +797,47 @@ Signed-off-by: Biwen Li if (!va) { dev_err(dev, "ioremap::CI failed\n"); goto err_ioremap2; +@@ -279,6 +305,21 @@ static int qman_portal_probe(struct plat + + pcfg->addr_virt[DPAA_PORTAL_CI] = va; + ++ /* Create an 1-to-1 iommu mapping for cena portal area */ ++ domain = iommu_get_domain_for_dev(dev); ++ if (domain) { ++ /* ++ * Note: not mapping this as cacheable triggers the infamous ++ * QMan CIDE error. ++ */ ++ err = iommu_map(domain, ++ addr_phys[0]->start, addr_phys[0]->start, ++ PAGE_ALIGN(resource_size(addr_phys[0])), ++ IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE); ++ if (err) ++ dev_warn(dev, "failed to iommu_map() %d\n", err); ++ } ++ + pcfg->pools = qm_get_pools_sdqcr(); + + spin_lock(&qman_lock); +@@ -290,6 +331,9 @@ static int qman_portal_probe(struct plat + } + + cpumask_set_cpu(cpu, &portal_cpus); ++ if (!__qman_portals_probed && ++ cpumask_weight(&portal_cpus) == num_online_cpus()) ++ __qman_portals_probed = 1; + spin_unlock(&qman_lock); + pcfg->cpu = cpu; + +@@ -314,6 +358,8 @@ err_portal_init: + err_ioremap2: + iounmap(pcfg->addr_virt[DPAA_PORTAL_CE]); + err_ioremap1: ++ __qman_portals_probed = -1; ++ + return -ENXIO; + } + --- a/drivers/soc/fsl/qbman/qman_priv.h +++ b/drivers/soc/fsl/qbman/qman_priv.h @@ -28,13 +28,13 @@ @@ -548,3 +874,50 @@ Signed-off-by: Biwen Li - int qman_test_stash(void); int qman_test_api(void); +--- a/include/soc/fsl/bman.h ++++ b/include/soc/fsl/bman.h +@@ -126,4 +126,20 @@ int bman_release(struct bman_pool *pool, + */ + int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num); + ++/** ++ * bman_is_probed - Check if bman is probed ++ * ++ * Returns 1 if the bman driver successfully probed, -1 if the bman driver ++ * failed to probe or 0 if the bman driver did not probed yet. ++ */ ++int bman_is_probed(void); ++/** ++ * bman_portals_probed - Check if all cpu bound bman portals are probed ++ * ++ * Returns 1 if all the required cpu bound bman portals successfully probed, ++ * -1 if probe errors appeared or 0 if the bman portals did not yet finished ++ * probing. ++ */ ++int bman_portals_probed(void); ++ + #endif /* __FSL_BMAN_H */ +--- a/include/soc/fsl/qman.h ++++ b/include/soc/fsl/qman.h +@@ -1186,4 +1186,21 @@ int qman_alloc_cgrid_range(u32 *result, + */ + int qman_release_cgrid(u32 id); + ++/** ++ * qman_is_probed - Check if qman is probed ++ * ++ * Returns 1 if the qman driver successfully probed, -1 if the qman driver ++ * failed to probe or 0 if the qman driver did not probed yet. ++ */ ++int qman_is_probed(void); ++ ++/** ++ * qman_portals_probed - Check if all cpu bound qman portals are probed ++ * ++ * Returns 1 if all the required cpu bound qman portals successfully probed, ++ * -1 if probe errors appeared or 0 if the qman portals did not yet finished ++ * probing. ++ */ ++int qman_portals_probed(void); ++ + #endif /* __FSL_QMAN_H */ diff --git a/target/linux/layerscape/patches-4.14/712-etsec-support-layerscape.patch b/target/linux/layerscape/patches-4.14/712-etsec-support-layerscape.patch new file mode 100644 index 0000000000..bb075d4d4f --- /dev/null +++ b/target/linux/layerscape/patches-4.14/712-etsec-support-layerscape.patch @@ -0,0 +1,77 @@ +From f0f6e88696957d376d8875f675c1caf75a33fd67 Mon Sep 17 00:00:00 2001 +From: Biwen Li +Date: Wed, 17 Apr 2019 18:58:34 +0800 +Subject: [PATCH] etsec: support layerscape + +This is an integrated patch of etsec for layerscape + +Signed-off-by: Biwen Li +Signed-off-by: David S. Miller +Signed-off-by: Yangbo Lu +--- + drivers/net/ethernet/freescale/gianfar.h | 3 --- + .../net/ethernet/freescale/gianfar_ethtool.c | 23 +++++++++++++++---- + 2 files changed, 18 insertions(+), 8 deletions(-) + +--- a/drivers/net/ethernet/freescale/gianfar.h ++++ b/drivers/net/ethernet/freescale/gianfar.h +@@ -1372,7 +1372,4 @@ struct filer_table { + struct gfar_filer_entry fe[MAX_FILER_CACHE_IDX + 20]; + }; + +-/* The gianfar_ptp module will set this variable */ +-extern int gfar_phc_index; +- + #endif /* __GIANFAR_H */ +--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c ++++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c +@@ -41,6 +41,8 @@ + #include + #include + #include ++#include ++#include + + #include "gianfar.h" + +@@ -1509,24 +1511,35 @@ static int gfar_get_nfc(struct net_devic + return ret; + } + +-int gfar_phc_index = -1; +-EXPORT_SYMBOL(gfar_phc_index); +- + static int gfar_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) + { + struct gfar_private *priv = netdev_priv(dev); ++ struct platform_device *ptp_dev; ++ struct device_node *ptp_node; ++ struct qoriq_ptp *ptp = NULL; ++ ++ info->phc_index = -1; + + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)) { + info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; +- info->phc_index = -1; + return 0; + } ++ ++ ptp_node = of_find_compatible_node(NULL, NULL, "fsl,etsec-ptp"); ++ if (ptp_node) { ++ ptp_dev = of_find_device_by_node(ptp_node); ++ if (ptp_dev) ++ ptp = platform_get_drvdata(ptp_dev); ++ } ++ ++ if (ptp) ++ info->phc_index = ptp->phc_index; ++ + info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; +- info->phc_index = gfar_phc_index; + info->tx_types = (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | diff --git a/target/linux/layerscape/patches-4.14/712-sdk-dpaa-rgmii-fixed-link.patch b/target/linux/layerscape/patches-4.14/712-sdk-dpaa-rgmii-fixed-link.patch deleted file mode 100644 index d6cf803e4f..0000000000 --- a/target/linux/layerscape/patches-4.14/712-sdk-dpaa-rgmii-fixed-link.patch +++ /dev/null @@ -1,62 +0,0 @@ -From b3544990f8496edda965e1ff9a14727360660676 Mon Sep 17 00:00:00 2001 -From: Mathew McBride -Date: Mon, 7 Aug 2017 10:19:48 +1000 -Subject: [PATCH] Recognize when an RGMII Link is set as fixed (in the device - tree) and set up the MAC accordingly - ---- - drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 1 + - .../freescale/sdk_fman/Peripherals/FM/MAC/memac.c | 13 +++++++++++++ - 2 files changed, 14 insertions(+) - ---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c -+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c -@@ -386,6 +386,7 @@ static int __cold mac_probe(struct platf - mac_dev->fixed_link->duplex = phy->duplex; - mac_dev->fixed_link->pause = phy->pause; - mac_dev->fixed_link->asym_pause = phy->asym_pause; -+ printk(KERN_INFO "Setting up fixed link, speed %d duplex %d\n", mac_dev->fixed_link->speed, mac_dev->fixed_link->duplex); - } - - _errno = mac_dev->init(mac_dev); ---- a/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c -+++ b/drivers/net/ethernet/freescale/sdk_fman/Peripherals/FM/MAC/memac.c -@@ -36,6 +36,8 @@ - - @Description FM mEMAC driver - *//***************************************************************************/ -+#include <../../../../sdk_dpaa/mac.h> -+#include - - #include "std_ext.h" - #include "string_ext.h" -@@ -48,6 +50,8 @@ - #include "memac.h" - - -+static t_Error MemacAdjustLink(t_Handle h_Memac, e_EnetSpeed speed, bool fullDuplex); -+ - /*****************************************************************************/ - /* Internal routines */ - /*****************************************************************************/ -@@ -276,11 +280,20 @@ static t_Error MemacEnable(t_Handle h_Me - { - t_Memac *p_Memac = (t_Memac *)h_Memac; - -+ struct mac_device *mac_dev = (struct mac_device *)p_Memac->h_App; -+ - SANITY_CHECK_RETURN_ERROR(p_Memac, E_INVALID_HANDLE); - SANITY_CHECK_RETURN_ERROR(!p_Memac->p_MemacDriverParam, E_INVALID_STATE); - - fman_memac_enable(p_Memac->p_MemMap, (mode & e_COMM_MODE_RX), (mode & e_COMM_MODE_TX)); - -+ if (ENET_INTERFACE_FROM_MODE(p_Memac->enetMode) == e_ENET_IF_RGMII) { -+ if (mac_dev->fixed_link) { -+ printk(KERN_INFO "This is a fixed-link, forcing speed %d duplex %d\n",mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex); -+ MemacAdjustLink(h_Memac,mac_dev->fixed_link->speed,mac_dev->fixed_link->duplex); -+ } -+ } -+ - return E_OK; - } - diff --git a/target/linux/layerscape/patches-4.14/801-sata-support-layerscape.patch b/target/linux/layerscape/patches-4.14/801-sata-support-layerscape.patch index aaf677b564..779127058a 100644 --- a/target/linux/layerscape/patches-4.14/801-sata-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/801-sata-support-layerscape.patch @@ -1,15 +1,33 @@ -From 918f966af1f0e42ff8ac298e1d7d02e67afcfab4 Mon Sep 17 00:00:00 2001 +From 71fb63c92eae3f9197e2343ed5ed3676440789e1 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:27:42 +0800 -Subject: [PATCH 18/40] sata: support layerscape +Date: Wed, 17 Apr 2019 18:59:01 +0800 +Subject: [PATCH] sata: support layerscape + This is an integrated patch of sata for layerscape -Signed-off-by: Tang Yuantian Signed-off-by: Biwen Li +Signed-off-by: Peng Ma +Signed-off-by: Tang Yuantian --- - drivers/ata/ahci_qoriq.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) + drivers/ata/ahci.h | 7 ++ + drivers/ata/ahci_qoriq.c | 168 ++++++++++++++++++++++++++++++++++++++ + drivers/ata/libata-core.c | 3 + + 3 files changed, 178 insertions(+) +--- a/drivers/ata/ahci.h ++++ b/drivers/ata/ahci.h +@@ -445,4 +445,11 @@ static inline int ahci_nr_ports(u32 cap) + return (cap & 0x1f) + 1; + } + ++#ifdef CONFIG_AHCI_QORIQ ++extern void fsl_sata_errata_379364(struct ata_link *link); ++#else ++static void fsl_sata_errata_379364(struct ata_link *link) ++{} ++#endif ++ + #endif /* _AHCI_H */ --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -35,6 +35,8 @@ @@ -21,7 +39,190 @@ Signed-off-by: Biwen Li #define AHCI_PORT_TRANS_CFG 0x08000029 #define AHCI_PORT_AXICC_CFG 0x3fffffff -@@ -183,6 +185,8 @@ static int ahci_qoriq_phy_init(struct ah +@@ -49,6 +51,27 @@ + #define ECC_DIS_ARMV8_CH2 0x80000000 + #define ECC_DIS_LS1088A 0x40000000 + ++/* errata for lx2160 */ ++#define RCWSR29_BASE 0x1E00170 ++#define SERDES2_BASE 0x1EB0000 ++#define DEVICE_CONFIG_REG_BASE 0x1E00000 ++#define SERDES2_LNAX_RX_CR(x) (0x840 + (0x100 * (x))) ++#define SERDES2_LNAX_RX_CBR(x) (0x8C0 + (0x100 * (x))) ++#define SYS_VER_REG 0xA4 ++#define LN_RX_RST 0x80000010 ++#define LN_RX_RST_DONE 0x3 ++#define LN_RX_MASK 0xf ++#define LX2160A_VER1 0x1 ++ ++#define SERDES2_LNAA 0 ++#define SERDES2_LNAB 1 ++#define SERDES2_LNAC 2 ++#define SERDES2_LNAD 3 ++#define SERDES2_LNAE 4 ++#define SERDES2_LNAF 5 ++#define SERDES2_LNAG 6 ++#define SERDES2_LNAH 7 ++ + enum ahci_qoriq_type { + AHCI_LS1021A, + AHCI_LS1043A, +@@ -56,6 +79,7 @@ enum ahci_qoriq_type { + AHCI_LS1046A, + AHCI_LS1088A, + AHCI_LS2088A, ++ AHCI_LX2160A, + }; + + struct ahci_qoriq_priv { +@@ -72,6 +96,7 @@ static const struct of_device_id ahci_qo + { .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A}, + { .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A}, + { .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A}, ++ { .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A}, + {}, + }; + MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match); +@@ -156,6 +181,138 @@ static struct scsi_host_template ahci_qo + AHCI_SHT(DRV_NAME), + }; + ++void fsl_sata_errata_379364(struct ata_link *link) ++{ ++ struct ata_port *ap = link->ap; ++ struct ahci_host_priv *hpriv = ap->host->private_data; ++ struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data; ++ bool lx2160a_workaround = (qoriq_priv->type == AHCI_LX2160A); ++ ++ int val = 0; ++ void __iomem *rcw_base = NULL; ++ void __iomem *serdes_base = NULL; ++ void __iomem *dev_con_base = NULL; ++ ++ if (!lx2160a_workaround) ++ return; ++ else { ++ dev_con_base = ioremap(DEVICE_CONFIG_REG_BASE, PAGE_SIZE); ++ if (!dev_con_base) { ++ ata_link_err(link, "device config ioremap failed\n"); ++ return; ++ } ++ ++ val = (readl(dev_con_base + SYS_VER_REG) & GENMASK(7, 4)) >> 4; ++ if (val != LX2160A_VER1) ++ goto dev_unmap; ++ ++ /* ++ * Add few msec delay. ++ * Check for corresponding serdes lane RST_DONE . ++ * apply lane reset. ++ */ ++ ++ serdes_base = ioremap(SERDES2_BASE, PAGE_SIZE); ++ if (!serdes_base) { ++ ata_link_err(link, "serdes ioremap failed\n"); ++ goto dev_unmap; ++ } ++ ++ rcw_base = ioremap(RCWSR29_BASE, PAGE_SIZE); ++ if (!rcw_base) { ++ ata_link_err(link, "rcw ioremap failed\n"); ++ goto serdes_unmap; ++ } ++ ++ ata_msleep(link->ap, 1); ++ ++ val = (readl(rcw_base) & GENMASK(25, 21)) >> 21; ++ ++ switch (val) { ++ case 1: ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAC)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAC)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAD)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAD)); ++ break; ++ ++ case 4: ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAG)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAG)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAH)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAH)); ++ break; ++ ++ case 5: ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAE)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAE)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAF)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAF)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAG)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAG)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAH)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAH)); ++ break; ++ ++ case 8: ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAC)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAC)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAD)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAD)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAE)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAE)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAF)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAF)); ++ break; ++ ++ case 12: ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAG)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAG)); ++ if ((readl(serdes_base + SERDES2_LNAX_RX_CBR(SERDES2_LNAH)) & ++ LN_RX_MASK) != LN_RX_RST_DONE) ++ writel(LN_RX_RST, serdes_base + ++ SERDES2_LNAX_RX_CR(SERDES2_LNAH)); ++ break; ++ ++ default: ++ break; ++ } ++ } ++ ++ iounmap(rcw_base); ++serdes_unmap: ++ iounmap(serdes_base); ++dev_unmap: ++ iounmap(dev_con_base); ++} ++ ++ + static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) + { + struct ahci_qoriq_priv *qpriv = hpriv->plat_data; +@@ -183,13 +340,18 @@ static int ahci_qoriq_phy_init(struct ah writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2, qpriv->ecc_addr); writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); @@ -30,16 +231,17 @@ Signed-off-by: Biwen Li writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); -@@ -190,6 +194,8 @@ static int ahci_qoriq_phy_init(struct ah + break; case AHCI_LS2080A: ++ case AHCI_LX2160A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); + writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); -@@ -201,6 +207,8 @@ static int ahci_qoriq_phy_init(struct ah +@@ -201,6 +363,8 @@ static int ahci_qoriq_phy_init(struct ah writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2, qpriv->ecc_addr); writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); @@ -48,7 +250,7 @@ Signed-off-by: Biwen Li writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); -@@ -212,6 +220,8 @@ static int ahci_qoriq_phy_init(struct ah +@@ -212,6 +376,8 @@ static int ahci_qoriq_phy_init(struct ah writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A, qpriv->ecc_addr); writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); @@ -57,7 +259,7 @@ Signed-off-by: Biwen Li writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); -@@ -219,6 +229,8 @@ static int ahci_qoriq_phy_init(struct ah +@@ -219,6 +385,8 @@ static int ahci_qoriq_phy_init(struct ah case AHCI_LS2088A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); @@ -66,3 +268,22 @@ Signed-off-by: Biwen Li writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); if (qpriv->is_dmacoherent) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); +--- a/drivers/ata/libata-core.c ++++ b/drivers/ata/libata-core.c +@@ -76,6 +76,7 @@ + #define CREATE_TRACE_POINTS + #include + ++#include "ahci.h" + #include "libata.h" + #include "libata-transport.h" + +@@ -4119,6 +4120,8 @@ int sata_link_hardreset(struct ata_link + */ + ata_msleep(link->ap, 1); + ++ fsl_sata_errata_379364(link); ++ + /* bring link back */ + rc = sata_link_resume(link, timing, deadline); + if (rc) diff --git a/target/linux/layerscape/patches-4.14/802-dma-support-layerscape.patch b/target/linux/layerscape/patches-4.14/802-dma-support-layerscape.patch index aee4ae2946..e39bae0d1d 100644 --- a/target/linux/layerscape/patches-4.14/802-dma-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/802-dma-support-layerscape.patch @@ -1,35 +1,40 @@ -From 731adfb43892a1d7fe00e2036200f33a9b61a589 Mon Sep 17 00:00:00 2001 +From 5cb4bc977d933323429050033da9c701b24df43e Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:02 +0800 -Subject: [PATCH 19/40] dma: support layerscape +Date: Wed, 17 Apr 2019 18:58:23 +0800 +Subject: [PATCH] dma: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + This is an integrated patch of dma for layerscape +Signed-off-by: Biwen Li Signed-off-by: Catalin Horghidan Signed-off-by: Changming Huang Signed-off-by: Horia Geantă +Signed-off-by: Ioana Ciornei Signed-off-by: jiaheng.fan +Signed-off-by: Laurentiu Tudor Signed-off-by: Peng Ma Signed-off-by: Radu Alexe Signed-off-by: Rajiv Vishwakarma Signed-off-by: Tudor Ambarus Signed-off-by: Wen He Signed-off-by: Yuan Yao -Signed-off-by: Biwen Li --- - .../devicetree/bindings/dma/fsl-qdma.txt | 51 + - drivers/dma/Kconfig | 33 +- - drivers/dma/Makefile | 3 + - drivers/dma/caam_dma.c | 462 ++++++ - drivers/dma/dpaa2-qdma/Kconfig | 8 + - drivers/dma/dpaa2-qdma/Makefile | 8 + - drivers/dma/dpaa2-qdma/dpaa2-qdma.c | 940 ++++++++++++ - drivers/dma/dpaa2-qdma/dpaa2-qdma.h | 227 +++ - drivers/dma/dpaa2-qdma/dpdmai.c | 515 +++++++ - drivers/dma/dpaa2-qdma/fsl_dpdmai.h | 521 +++++++ - drivers/dma/dpaa2-qdma/fsl_dpdmai_cmd.h | 222 +++ - drivers/dma/fsl-qdma.c | 1278 +++++++++++++++++ - 12 files changed, 4267 insertions(+), 1 deletion(-) - create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt + drivers/dma/Kconfig | 33 +- + drivers/dma/Makefile | 3 + + drivers/dma/caam_dma.c | 462 ++++++++ + drivers/dma/dpaa2-qdma/Kconfig | 8 + + drivers/dma/dpaa2-qdma/Makefile | 8 + + drivers/dma/dpaa2-qdma/dpaa2-qdma.c | 781 ++++++++++++++ + drivers/dma/dpaa2-qdma/dpaa2-qdma.h | 181 ++++ + drivers/dma/dpaa2-qdma/dpdmai.c | 515 +++++++++ + drivers/dma/dpaa2-qdma/fsl_dpdmai.h | 521 +++++++++ + drivers/dma/dpaa2-qdma/fsl_dpdmai_cmd.h | 222 ++++ + drivers/dma/fsl-edma.c | 66 +- + drivers/dma/fsl-qdma.c | 1278 +++++++++++++++++++++++ + 12 files changed, 4073 insertions(+), 5 deletions(-) create mode 100644 drivers/dma/caam_dma.c create mode 100644 drivers/dma/dpaa2-qdma/Kconfig create mode 100644 drivers/dma/dpaa2-qdma/Makefile @@ -40,60 +45,6 @@ Signed-off-by: Biwen Li create mode 100644 drivers/dma/dpaa2-qdma/fsl_dpdmai_cmd.h create mode 100644 drivers/dma/fsl-qdma.c ---- /dev/null -+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt -@@ -0,0 +1,51 @@ -+* Freescale queue Direct Memory Access(qDMA) Controller -+ -+The qDMA supports channel virtualization by allowing DMA jobs to be enqueued into -+different command queues. Core can initiate a DMA transaction by preparing a command -+descriptor for each DMA job and enqueuing this job to a command queue. -+ -+* qDMA Controller -+Required properties: -+- compatible : -+ should be "fsl,ls1021a-qdma". -+- reg : Specifies base physical address(s) and size of the qDMA registers. -+ The 1st region is qDMA control register's address and size. -+ The 2nd region is status queue control register's address and size. -+ The 3rd region is virtual block control register's address and size. -+- interrupts : A list of interrupt-specifiers, one for each entry in -+ interrupt-names. -+- interrupt-names : Should contain: -+ "qdma-queue0" - the block0 interrupt -+ "qdma-queue1" - the block1 interrupt -+ "qdma-queue2" - the block2 interrupt -+ "qdma-queue3" - the block3 interrupt -+ "qdma-error" - the error interrupt -+- channels : Number of DMA channels supported -+- block-number : the virtual block number -+- block-offset : the offset of different virtual block -+- queues : the number of command queue per virtual block -+- status-sizes : status queue size of per virtual block -+- queue-sizes : command queue size of per virtual block, the size number based on queues -+- big-endian: If present registers and hardware scatter/gather descriptors -+ of the qDMA are implemented in big endian mode, otherwise in little -+ mode. -+ -+Examples: -+ qdma: qdma@8390000 { -+ compatible = "fsl,ls1021a-qdma"; -+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ -+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */ -+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */ -+ interrupts = , -+ , -+ ; -+ interrupt-names = "qdma-error", -+ "qdma-queue0", "qdma-queue1"; -+ channels = <8>; -+ block-number = <2>; -+ block-offset = <0x1000>; -+ queues = <2>; -+ status-sizes = <64>; -+ queue-sizes = <64 64>; -+ big-endian; -+ }; --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -129,6 +129,24 @@ config COH901318 @@ -659,7 +610,7 @@ Signed-off-by: Biwen Li +fsl-dpaa2-qdma-objs := dpaa2-qdma.o dpdmai.o --- /dev/null +++ b/drivers/dma/dpaa2-qdma/dpaa2-qdma.c -@@ -0,0 +1,940 @@ +@@ -0,0 +1,781 @@ +/* + * drivers/dma/dpaa2-qdma/dpaa2-qdma.c + * @@ -693,6 +644,7 @@ Signed-off-by: Biwen Li +#include +#include +#include ++#include + +#include "../virt-dma.h" + @@ -765,9 +717,6 @@ Signed-off-by: Biwen Li + sizeof(struct dpaa2_fl_entry) * 3; + + comp_temp->qchan = dpaa2_chan; -+ comp_temp->sg_blk_num = 0; -+ INIT_LIST_HEAD(&comp_temp->sg_src_head); -+ INIT_LIST_HEAD(&comp_temp->sg_dst_head); + return comp_temp; + } + comp_temp = list_first_entry(&dpaa2_chan->comp_free, @@ -802,7 +751,8 @@ Signed-off-by: Biwen Li +/* first frame list for descriptor buffer */ +static void dpaa2_qdma_populate_first_framel( + struct dpaa2_fl_entry *f_list, -+ struct dpaa2_qdma_comp *dpaa2_comp) ++ struct dpaa2_qdma_comp *dpaa2_comp, ++ bool wrt_changed) +{ + struct dpaa2_qdma_sd_d *sdd; + @@ -811,7 +761,12 @@ Signed-off-by: Biwen Li + /* source and destination descriptor */ + sdd->cmd = cpu_to_le32(QDMA_SD_CMD_RDTTYPE_COHERENT); /* source descriptor CMD */ + sdd++; -+ sdd->cmd = cpu_to_le32(QDMA_DD_CMD_WRTTYPE_COHERENT); /* dest descriptor CMD */ ++ ++ /* dest descriptor CMD */ ++ if (wrt_changed) ++ sdd->cmd = cpu_to_le32(LX2160_QDMA_DD_CMD_WRTTYPE_COHERENT); ++ else ++ sdd->cmd = cpu_to_le32(QDMA_DD_CMD_WRTTYPE_COHERENT); + + memset(f_list, 0, sizeof(struct dpaa2_fl_entry)); + /* first frame list to source descriptor */ @@ -855,11 +810,15 @@ Signed-off-by: Biwen Li + dma_addr_t src, size_t len, unsigned long flags) +{ + struct dpaa2_qdma_chan *dpaa2_chan = to_dpaa2_qdma_chan(chan); ++ struct dpaa2_qdma_engine *dpaa2_qdma; + struct dpaa2_qdma_comp *dpaa2_comp; + struct dpaa2_fl_entry *f_list; ++ bool wrt_changed; + uint32_t format; + ++ dpaa2_qdma = dpaa2_chan->qdma; + dpaa2_comp = dpaa2_qdma_request_desc(dpaa2_chan); ++ wrt_changed = dpaa2_qdma->qdma_wrtype_fixup; + +#ifdef LONG_FORMAT + format = QDMA_FD_LONG_FORMAT; @@ -873,7 +832,7 @@ Signed-off-by: Biwen Li + +#ifdef LONG_FORMAT + /* first frame list for descriptor buffer (logn format) */ -+ dpaa2_qdma_populate_first_framel(f_list, dpaa2_comp); ++ dpaa2_qdma_populate_first_framel(f_list, dpaa2_comp, wrt_changed); + + f_list++; +#endif @@ -883,155 +842,6 @@ Signed-off-by: Biwen Li + return vchan_tx_prep(&dpaa2_chan->vchan, &dpaa2_comp->vdesc, flags); +} + -+static struct qdma_sg_blk *dpaa2_qdma_get_sg_blk( -+ struct dpaa2_qdma_comp *dpaa2_comp, -+ struct dpaa2_qdma_chan *dpaa2_chan) -+{ -+ struct qdma_sg_blk *sg_blk = NULL; -+ dma_addr_t phy_sgb; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dpaa2_chan->queue_lock, flags); -+ if (list_empty(&dpaa2_chan->sgb_free)) { -+ sg_blk = (struct qdma_sg_blk *)dma_pool_alloc( -+ dpaa2_chan->sg_blk_pool, -+ GFP_NOWAIT, &phy_sgb); -+ if (!sg_blk) { -+ spin_unlock_irqrestore(&dpaa2_chan->queue_lock, flags); -+ return sg_blk; -+ } -+ sg_blk->blk_virt_addr = (void *)(sg_blk + 1); -+ sg_blk->blk_bus_addr = phy_sgb + sizeof(*sg_blk); -+ } else { -+ sg_blk = list_first_entry(&dpaa2_chan->sgb_free, -+ struct qdma_sg_blk, list); -+ list_del(&sg_blk->list); -+ } -+ spin_unlock_irqrestore(&dpaa2_chan->queue_lock, flags); -+ -+ return sg_blk; -+} -+ -+static uint32_t dpaa2_qdma_populate_sg(struct device *dev, -+ struct dpaa2_qdma_chan *dpaa2_chan, -+ struct dpaa2_qdma_comp *dpaa2_comp, -+ struct scatterlist *dst_sg, u32 dst_nents, -+ struct scatterlist *src_sg, u32 src_nents) -+{ -+ struct dpaa2_qdma_sg *src_sge; -+ struct dpaa2_qdma_sg *dst_sge; -+ struct qdma_sg_blk *sg_blk; -+ struct qdma_sg_blk *sg_blk_dst; -+ dma_addr_t src; -+ dma_addr_t dst; -+ uint32_t num; -+ uint32_t blocks; -+ uint32_t len = 0; -+ uint32_t total_len = 0; -+ int i, j = 0; -+ -+ num = min(dst_nents, src_nents); -+ blocks = num / (NUM_SG_PER_BLK - 1); -+ if (num % (NUM_SG_PER_BLK - 1)) -+ blocks += 1; -+ if (dpaa2_comp->sg_blk_num < blocks) { -+ len = blocks - dpaa2_comp->sg_blk_num; -+ for (i = 0; i < len; i++) { -+ /* source sg blocks */ -+ sg_blk = dpaa2_qdma_get_sg_blk(dpaa2_comp, dpaa2_chan); -+ if (!sg_blk) -+ return 0; -+ list_add_tail(&sg_blk->list, &dpaa2_comp->sg_src_head); -+ /* destination sg blocks */ -+ sg_blk = dpaa2_qdma_get_sg_blk(dpaa2_comp, dpaa2_chan); -+ if (!sg_blk) -+ return 0; -+ list_add_tail(&sg_blk->list, &dpaa2_comp->sg_dst_head); -+ } -+ } else { -+ len = dpaa2_comp->sg_blk_num - blocks; -+ for (i = 0; i < len; i++) { -+ spin_lock(&dpaa2_chan->queue_lock); -+ /* handle source sg blocks */ -+ sg_blk = list_first_entry(&dpaa2_comp->sg_src_head, -+ struct qdma_sg_blk, list); -+ list_del(&sg_blk->list); -+ list_add_tail(&sg_blk->list, &dpaa2_chan->sgb_free); -+ /* handle destination sg blocks */ -+ sg_blk = list_first_entry(&dpaa2_comp->sg_dst_head, -+ struct qdma_sg_blk, list); -+ list_del(&sg_blk->list); -+ list_add_tail(&sg_blk->list, &dpaa2_chan->sgb_free); -+ spin_unlock(&dpaa2_chan->queue_lock); -+ } -+ } -+ dpaa2_comp->sg_blk_num = blocks; -+ -+ /* get the first source sg phy address */ -+ sg_blk = list_first_entry(&dpaa2_comp->sg_src_head, -+ struct qdma_sg_blk, list); -+ dpaa2_comp->sge_src_bus_addr = sg_blk->blk_bus_addr; -+ /* get the first destinaiton sg phy address */ -+ sg_blk_dst = list_first_entry(&dpaa2_comp->sg_dst_head, -+ struct qdma_sg_blk, list); -+ dpaa2_comp->sge_dst_bus_addr = sg_blk_dst->blk_bus_addr; -+ -+ for (i = 0; i < blocks; i++) { -+ src_sge = (struct dpaa2_qdma_sg *)sg_blk->blk_virt_addr; -+ dst_sge = (struct dpaa2_qdma_sg *)sg_blk_dst->blk_virt_addr; -+ -+ for (j = 0; j < (NUM_SG_PER_BLK - 1); j++) { -+ len = min(sg_dma_len(dst_sg), sg_dma_len(src_sg)); -+ if (0 == len) -+ goto fetch; -+ total_len += len; -+ src = sg_dma_address(src_sg); -+ dst = sg_dma_address(dst_sg); -+ -+ /* source SG */ -+ src_sge->addr_lo = src; -+ src_sge->addr_hi = (src >> 32); -+ src_sge->data_len.data_len_sl0 = len; -+ src_sge->ctrl.sl = QDMA_SG_SL_LONG; -+ src_sge->ctrl.fmt = QDMA_SG_FMT_SDB; -+ /* destination SG */ -+ dst_sge->addr_lo = dst; -+ dst_sge->addr_hi = (dst >> 32); -+ dst_sge->data_len.data_len_sl0 = len; -+ dst_sge->ctrl.sl = QDMA_SG_SL_LONG; -+ dst_sge->ctrl.fmt = QDMA_SG_FMT_SDB; -+fetch: -+ num--; -+ if (0 == num) { -+ src_sge->ctrl.f = QDMA_SG_F; -+ dst_sge->ctrl.f = QDMA_SG_F; -+ goto end; -+ } -+ dst_sg = sg_next(dst_sg); -+ src_sg = sg_next(src_sg); -+ src_sge++; -+ dst_sge++; -+ if (j == (NUM_SG_PER_BLK - 2)) { -+ /* for next blocks, extension */ -+ sg_blk = list_next_entry(sg_blk, list); -+ sg_blk_dst = list_next_entry(sg_blk_dst, list); -+ src_sge->addr_lo = sg_blk->blk_bus_addr; -+ src_sge->addr_hi = sg_blk->blk_bus_addr >> 32; -+ src_sge->ctrl.sl = QDMA_SG_SL_LONG; -+ src_sge->ctrl.fmt = QDMA_SG_FMT_SGTE; -+ dst_sge->addr_lo = sg_blk_dst->blk_bus_addr; -+ dst_sge->addr_hi = -+ sg_blk_dst->blk_bus_addr >> 32; -+ dst_sge->ctrl.sl = QDMA_SG_SL_LONG; -+ dst_sge->ctrl.fmt = QDMA_SG_FMT_SGTE; -+ } -+ } -+ } -+ -+end: -+ return total_len; -+} -+ +static enum dma_status dpaa2_qdma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) +{ @@ -1245,7 +1055,7 @@ Signed-off-by: Biwen Li + ppriv->nctx.desired_cpu = 1; + ppriv->nctx.id = ppriv->rsp_fqid; + ppriv->nctx.cb = dpaa2_qdma_fqdan_cb; -+ err = dpaa2_io_service_register(NULL, &ppriv->nctx); ++ err = dpaa2_io_service_register(NULL, &ppriv->nctx, dev); + if (err) { + dev_err(dev, "Notification register failed\n"); + goto err_service; @@ -1263,11 +1073,11 @@ Signed-off-by: Biwen Li + return 0; + +err_store: -+ dpaa2_io_service_deregister(NULL, &ppriv->nctx); ++ dpaa2_io_service_deregister(NULL, &ppriv->nctx, dev); +err_service: + ppriv--; + while (ppriv >= priv->ppriv) { -+ dpaa2_io_service_deregister(NULL, &ppriv->nctx); ++ dpaa2_io_service_deregister(NULL, &ppriv->nctx, dev); + dpaa2_io_store_destroy(ppriv->store); + ppriv--; + } @@ -1288,10 +1098,11 @@ Signed-off-by: Biwen Li +static void __cold dpaa2_dpdmai_dpio_free(struct dpaa2_qdma_priv *priv) +{ + struct dpaa2_qdma_priv_per_prio *ppriv = priv->ppriv; ++ struct device *dev = priv->dev; + int i; + + for (i = 0; i < priv->num_pairs; i++) { -+ dpaa2_io_service_deregister(NULL, &ppriv->nctx); ++ dpaa2_io_service_deregister(NULL, &ppriv->nctx, dev); + ppriv++; + } +} @@ -1348,22 +1159,6 @@ Signed-off-by: Biwen Li + return err; +} + -+static void __cold dpaa2_dpdmai_free_pool(struct dpaa2_qdma_chan *qchan, -+ struct list_head *head) -+{ -+ struct qdma_sg_blk *sgb_tmp, *_sgb_tmp; -+ /* free the QDMA SG pool block */ -+ list_for_each_entry_safe(sgb_tmp, _sgb_tmp, head, list) { -+ sgb_tmp->blk_virt_addr = (void *)((struct qdma_sg_blk *) -+ sgb_tmp->blk_virt_addr - 1); -+ sgb_tmp->blk_bus_addr = sgb_tmp->blk_bus_addr -+ - sizeof(*sgb_tmp); -+ dma_pool_free(qchan->sg_blk_pool, sgb_tmp->blk_virt_addr, -+ sgb_tmp->blk_bus_addr); -+ } -+ -+} -+ +static void __cold dpaa2_dpdmai_free_comp(struct dpaa2_qdma_chan *qchan, + struct list_head *head) +{ @@ -1374,10 +1169,6 @@ Signed-off-by: Biwen Li + dma_pool_free(qchan->fd_pool, + comp_tmp->fd_virt_addr, + comp_tmp->fd_bus_addr); -+ /* free the SG source block on comp */ -+ dpaa2_dpdmai_free_pool(qchan, &comp_tmp->sg_src_head); -+ /* free the SG destination block on comp */ -+ dpaa2_dpdmai_free_pool(qchan, &comp_tmp->sg_dst_head); + list_del(&comp_tmp->list); + kfree(comp_tmp); + } @@ -1395,9 +1186,7 @@ Signed-off-by: Biwen Li + qchan = &dpaa2_qdma->chans[i]; + dpaa2_dpdmai_free_comp(qchan, &qchan->comp_used); + dpaa2_dpdmai_free_comp(qchan, &qchan->comp_free); -+ dpaa2_dpdmai_free_pool(qchan, &qchan->sgb_free); + dma_pool_destroy(qchan->fd_pool); -+ dma_pool_destroy(qchan->sg_blk_pool); + } +} + @@ -1418,15 +1207,10 @@ Signed-off-by: Biwen Li + dev, FD_POOL_SIZE, 32, 0); + if (!dpaa2_chan->fd_pool) + return -1; -+ dpaa2_chan->sg_blk_pool = dma_pool_create("sg_blk_pool", -+ dev, SG_POOL_SIZE, 32, 0); -+ if (!dpaa2_chan->sg_blk_pool) -+ return -1; + + spin_lock_init(&dpaa2_chan->queue_lock); + INIT_LIST_HEAD(&dpaa2_chan->comp_used); + INIT_LIST_HEAD(&dpaa2_chan->comp_free); -+ INIT_LIST_HEAD(&dpaa2_chan->sgb_free); + } + return 0; +} @@ -1451,7 +1235,10 @@ Signed-off-by: Biwen Li + /* obtain a MC portal */ + err = fsl_mc_portal_allocate(dpdmai_dev, 0, &priv->mc_io); + if (err) { -+ dev_err(dev, "MC portal allocation failed\n"); ++ if (err == -ENXIO) ++ err = -EPROBE_DEFER; ++ else ++ dev_err(dev, "MC portal allocation failed\n"); + goto err_mcportal; + } + @@ -1500,6 +1287,11 @@ Signed-off-by: Biwen Li + goto err_reg; + } + ++ if (soc_device_match(soc_fixup_tuning)) ++ dpaa2_qdma->qdma_wrtype_fixup = true; ++ else ++ dpaa2_qdma->qdma_wrtype_fixup = false; ++ + dma_cap_set(DMA_PRIVATE, dpaa2_qdma->dma_dev.cap_mask); + dma_cap_set(DMA_SLAVE, dpaa2_qdma->dma_dev.cap_mask); + dma_cap_set(DMA_MEMCPY, dpaa2_qdma->dma_dev.cap_mask); @@ -1602,7 +1394,7 @@ Signed-off-by: Biwen Li +MODULE_LICENSE("Dual BSD/GPL"); --- /dev/null +++ b/drivers/dma/dpaa2-qdma/dpaa2-qdma.h -@@ -0,0 +1,227 @@ +@@ -0,0 +1,181 @@ +/* Copyright 2015 NXP Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without @@ -1641,7 +1433,6 @@ Signed-off-by: Biwen Li + +#define DPAA2_QDMA_STORE_SIZE 16 +#define NUM_CH 8 -+#define NUM_SG_PER_BLK 16 + +#define QDMA_DMR_OFFSET 0x0 +#define QDMA_DQ_EN (0 << 30) @@ -1672,37 +1463,7 @@ Signed-off-by: Biwen Li +/* Destination descriptor command write transaction type for RBP=0: + coherent copy of cacheable memory */ +#define QDMA_DD_CMD_WRTTYPE_COHERENT (0x6 << 28) -+ -+#define QDMA_SG_FMT_SDB 0x0 /* single data buffer */ -+#define QDMA_SG_FMT_FDS 0x1 /* frame data section */ -+#define QDMA_SG_FMT_SGTE 0x2 /* SGT extension */ -+#define QDMA_SG_SL_SHORT 0x1 /* short length */ -+#define QDMA_SG_SL_LONG 0x0 /* short length */ -+#define QDMA_SG_F 0x1 /* last sg entry */ -+struct dpaa2_qdma_sg { -+ uint32_t addr_lo; /* address 0:31 */ -+ uint32_t addr_hi:17; /* address 32:48 */ -+ uint32_t rsv:15; -+ union { -+ uint32_t data_len_sl0; /* SL=0, the long format */ -+ struct { -+ uint32_t len:17; /* SL=1, the short format */ -+ uint32_t reserve:3; -+ uint32_t sf:1; -+ uint32_t sr:1; -+ uint32_t size:10; /* buff size */ -+ } data_len_sl1; -+ } data_len; /* AVAIL_LENGTH */ -+ struct { -+ uint32_t bpid:14; -+ uint32_t ivp:1; -+ uint32_t mbt:1; -+ uint32_t offset:12; -+ uint32_t fmt:2; -+ uint32_t sl:1; -+ uint32_t f:1; -+ } ctrl; -+} __attribute__((__packed__)); ++#define LX2160_QDMA_DD_CMD_WRTTYPE_COHERENT (0xb << 28) + +#define QMAN_FD_FMT_ENABLE (1) /* frame list table enable */ +#define QMAN_FD_BMT_ENABLE (1 << 15) /* bypass memory translation */ @@ -1710,8 +1471,6 @@ Signed-off-by: Biwen Li +#define QMAN_FD_SL_DISABLE (0 << 14) /* short lengthe disabled */ +#define QMAN_FD_SL_ENABLE (1 << 14) /* short lengthe enabled */ + -+#define QDMA_SB_FRAME (0 << 28) /* single frame */ -+#define QDMA_SG_FRAME (2 << 28) /* scatter gather frames */ +#define QDMA_FINAL_BIT_DISABLE (0 << 31) /* final bit disable */ +#define QDMA_FINAL_BIT_ENABLE (1 << 31) /* final bit enable */ + @@ -1747,35 +1506,19 @@ Signed-off-by: Biwen Li + struct mutex dpaa2_queue_mutex; + spinlock_t queue_lock; + struct dma_pool *fd_pool; -+ struct dma_pool *sg_blk_pool; + + struct list_head comp_used; + struct list_head comp_free; + -+ struct list_head sgb_free; -+}; -+ -+struct qdma_sg_blk { -+ dma_addr_t blk_bus_addr; -+ void *blk_virt_addr; -+ struct list_head list; +}; + +struct dpaa2_qdma_comp { + dma_addr_t fd_bus_addr; + dma_addr_t fl_bus_addr; + dma_addr_t desc_bus_addr; -+ dma_addr_t sge_src_bus_addr; -+ dma_addr_t sge_dst_bus_addr; + void *fd_virt_addr; + void *fl_virt_addr; + void *desc_virt_addr; -+ void *sg_src_virt_addr; -+ void *sg_dst_virt_addr; -+ struct qdma_sg_blk *sg_blk; -+ uint32_t sg_blk_num; -+ struct list_head sg_src_head; -+ struct list_head sg_dst_head; + struct dpaa2_qdma_chan *qchan; + struct virt_dma_desc vdesc; + struct list_head list; @@ -1785,6 +1528,7 @@ Signed-off-by: Biwen Li + struct dma_device dma_dev; + u32 n_chans; + struct dpaa2_qdma_chan chans[NUM_CH]; ++ bool qdma_wrtype_fixup; + + struct dpaa2_qdma_priv *priv; +}; @@ -1821,14 +1565,16 @@ Signed-off-by: Biwen Li + struct dpaa2_qdma_priv *priv; +}; + ++static struct soc_device_attribute soc_fixup_tuning[] = { ++ { .family = "QorIQ LX2160A"}, ++ { }, ++}; ++ +/* FD pool size: one FD + 3 Frame list + 2 source/destination descriptor */ +#define FD_POOL_SIZE (sizeof(struct dpaa2_fd) + \ + sizeof(struct dpaa2_fl_entry) * 3 + \ + sizeof(struct dpaa2_qdma_sd_d) * 2) + -+/* qdma_sg_blk + 16 SGs */ -+#define SG_POOL_SIZE (sizeof(struct qdma_sg_blk) +\ -+ sizeof(struct dpaa2_qdma_sg) * NUM_SG_PER_BLK) +#endif /* __DPAA2_QDMA_H */ --- /dev/null +++ b/drivers/dma/dpaa2-qdma/dpdmai.c @@ -3097,6 +2843,143 @@ Signed-off-by: Biwen Li + MC_RSP_OP(cmd, 1, 0, 32, uint32_t, attr->fqid) + +#endif /* _FSL_DPDMAI_CMD_H */ +--- a/drivers/dma/fsl-edma.c ++++ b/drivers/dma/fsl-edma.c +@@ -146,6 +146,8 @@ struct fsl_edma_slave_config { + u32 dev_addr; + u32 burst; + u32 attr; ++ dma_addr_t dma_dev_addr; ++ enum dma_data_direction dma_dir; + }; + + struct fsl_edma_chan { +@@ -342,6 +344,53 @@ static int fsl_edma_resume(struct dma_ch + return 0; + } + ++static void fsl_edma_unprep_slave_dma(struct fsl_edma_chan *fsl_chan) ++{ ++ if (fsl_chan->fsc.dma_dir != DMA_NONE) ++ dma_unmap_resource(fsl_chan->vchan.chan.device->dev, ++ fsl_chan->fsc.dma_dev_addr, ++ fsl_chan->fsc.burst, fsl_chan->fsc.dma_dir, 0); ++ fsl_chan->fsc.dma_dir = DMA_NONE; ++} ++ ++static bool fsl_edma_prep_slave_dma(struct fsl_edma_chan *fsl_chan, ++ enum dma_transfer_direction dir) ++{ ++ struct device *dev = fsl_chan->vchan.chan.device->dev; ++ enum dma_data_direction dma_dir; ++ ++ switch (dir) { ++ case DMA_MEM_TO_DEV: ++ dma_dir = DMA_FROM_DEVICE; ++ break; ++ case DMA_DEV_TO_MEM: ++ dma_dir = DMA_TO_DEVICE; ++ break; ++ case DMA_DEV_TO_DEV: ++ dma_dir = DMA_BIDIRECTIONAL; ++ break; ++ default: ++ dma_dir = DMA_NONE; ++ break; ++ } ++ ++ /* Already mapped for this config? */ ++ if (fsl_chan->fsc.dma_dir == dma_dir) ++ return true; ++ ++ fsl_edma_unprep_slave_dma(fsl_chan); ++ fsl_chan->fsc.dma_dev_addr = dma_map_resource(dev, ++ fsl_chan->fsc.dev_addr, ++ fsl_chan->fsc.burst, ++ dma_dir, 0); ++ if (dma_mapping_error(dev, fsl_chan->fsc.dma_dev_addr)) ++ return false; ++ ++ fsl_chan->fsc.dma_dir = dma_dir; ++ ++ return true; ++} ++ + static int fsl_edma_slave_config(struct dma_chan *chan, + struct dma_slave_config *cfg) + { +@@ -361,6 +410,7 @@ static int fsl_edma_slave_config(struct + } else { + return -EINVAL; + } ++ fsl_edma_unprep_slave_dma(fsl_chan); + return 0; + } + +@@ -553,6 +603,9 @@ static struct dma_async_tx_descriptor *f + if (!is_slave_direction(fsl_chan->fsc.dir)) + return NULL; + ++ if (!fsl_edma_prep_slave_dma(fsl_chan, fsl_chan->fsc.dir)) ++ return NULL; ++ + sg_len = buf_len / period_len; + fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len); + if (!fsl_desc) +@@ -572,11 +625,11 @@ static struct dma_async_tx_descriptor *f + + if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) { + src_addr = dma_buf_next; +- dst_addr = fsl_chan->fsc.dev_addr; ++ dst_addr = fsl_chan->fsc.dma_dev_addr; + soff = fsl_chan->fsc.addr_width; + doff = 0; + } else { +- src_addr = fsl_chan->fsc.dev_addr; ++ src_addr = fsl_chan->fsc.dma_dev_addr; + dst_addr = dma_buf_next; + soff = 0; + doff = fsl_chan->fsc.addr_width; +@@ -606,6 +659,9 @@ static struct dma_async_tx_descriptor *f + if (!is_slave_direction(fsl_chan->fsc.dir)) + return NULL; + ++ if (!fsl_edma_prep_slave_dma(fsl_chan, fsl_chan->fsc.dir)) ++ return NULL; ++ + fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len); + if (!fsl_desc) + return NULL; +@@ -618,11 +674,11 @@ static struct dma_async_tx_descriptor *f + + if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) { + src_addr = sg_dma_address(sg); +- dst_addr = fsl_chan->fsc.dev_addr; ++ dst_addr = fsl_chan->fsc.dma_dev_addr; + soff = fsl_chan->fsc.addr_width; + doff = 0; + } else { +- src_addr = fsl_chan->fsc.dev_addr; ++ src_addr = fsl_chan->fsc.dma_dev_addr; + dst_addr = sg_dma_address(sg); + soff = 0; + doff = fsl_chan->fsc.addr_width; +@@ -802,6 +858,7 @@ static void fsl_edma_free_chan_resources + fsl_edma_chan_mux(fsl_chan, 0, false); + fsl_chan->edesc = NULL; + vchan_get_all_descriptors(&fsl_chan->vchan, &head); ++ fsl_edma_unprep_slave_dma(fsl_chan); + spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); + + vchan_dma_desc_free_list(&fsl_chan->vchan, &head); +@@ -937,6 +994,7 @@ static int fsl_edma_probe(struct platfor + fsl_chan->slave_id = 0; + fsl_chan->idle = true; + fsl_chan->vchan.desc_free = fsl_edma_free_desc; ++ fsl_chan->fsc.dma_dir = DMA_NONE; + vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev); + + edma_writew(fsl_edma, 0x0, fsl_edma->membase + EDMA_TCD_CSR(i)); --- /dev/null +++ b/drivers/dma/fsl-qdma.c @@ -0,0 +1,1278 @@ diff --git a/target/linux/layerscape/patches-4.14/803-flextimer-support-layerscape.patch b/target/linux/layerscape/patches-4.14/803-flextimer-support-layerscape.patch index 55ee185111..b3616f040d 100644 --- a/target/linux/layerscape/patches-4.14/803-flextimer-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/803-flextimer-support-layerscape.patch @@ -1,18 +1,19 @@ -From d586effc9b71ddf240fb294b1ab1205bbe6fec4b Mon Sep 17 00:00:00 2001 +From 0f31298eb0a9b2cd7990b709ff18229fadfa474b Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:32 +0800 -Subject: [PATCH 20/40] flextimer: support layerscape +Date: Wed, 17 Apr 2019 18:58:38 +0800 +Subject: [PATCH] flextimer: support layerscape + This is an integrated patch of flextimer for layerscape +Signed-off-by: Biwen Li Signed-off-by: Meng Yi Signed-off-by: Ran Wang Signed-off-by: Zhang Ying-22455 -Signed-off-by: Biwen Li --- .../bindings/soc/fsl/layerscape/ftm-alarm.txt | 32 ++ drivers/clocksource/fsl_ftm_timer.c | 8 +- - drivers/soc/fsl/layerscape/ftm_alarm.c | 375 ++++++++++++++++++ - 3 files changed, 411 insertions(+), 4 deletions(-) + drivers/soc/fsl/layerscape/ftm_alarm.c | 382 ++++++++++++++++++ + 3 files changed, 418 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/fsl/layerscape/ftm-alarm.txt create mode 100644 drivers/soc/fsl/layerscape/ftm_alarm.c @@ -71,7 +72,7 @@ Signed-off-by: Biwen Li static inline void ftm_irq_enable(void __iomem *base) --- /dev/null +++ b/drivers/soc/fsl/layerscape/ftm_alarm.c -@@ -0,0 +1,375 @@ +@@ -0,0 +1,382 @@ +/* + * Freescale FlexTimer Module (FTM) Alarm driver. + * @@ -159,6 +160,11 @@ Signed-off-by: Biwen Li + .flextimer_set_bit = 0x4000, +}; + ++static struct rcpm_cfg lx2160a_rcpm_cfg = { ++ .big_endian = LITTLE_ENDIAN, ++ .flextimer_set_bit = 0x4000, ++}; ++ +static const struct of_device_id ippdexpcr_of_match[] = { + { .compatible = "fsl,ls1012a-ftm-alarm", .data = &ls1012a_rcpm_cfg}, + { .compatible = "fsl,ls1021a-ftm-alarm", .data = &ls1021a_rcpm_cfg}, @@ -166,6 +172,7 @@ Signed-off-by: Biwen Li + { .compatible = "fsl,ls1046a-ftm-alarm", .data = &ls1046a_rcpm_cfg}, + { .compatible = "fsl,ls1088a-ftm-alarm", .data = &ls1088a_rcpm_cfg}, + { .compatible = "fsl,ls208xa-ftm-alarm", .data = &ls208xa_rcpm_cfg}, ++ { .compatible = "fsl,lx2160a-ftm-alarm", .data = &lx2160a_rcpm_cfg}, + {}, +}; +MODULE_DEVICE_TABLE(of, ippdexpcr_of_match); @@ -429,6 +436,7 @@ Signed-off-by: Biwen Li + { .compatible = "fsl,ls1046a-ftm-alarm", }, + { .compatible = "fsl,ls1088a-ftm-alarm", }, + { .compatible = "fsl,ls208xa-ftm-alarm", }, ++ { .compatible = "fsl,lx2160a-ftm-alarm", }, + { .compatible = "fsl,ftm-timer", }, + { }, +}; diff --git a/target/linux/layerscape/patches-4.14/804-i2c-support-layerscape.patch b/target/linux/layerscape/patches-4.14/804-i2c-support-layerscape.patch index 820f384af4..e0dbffe303 100644 --- a/target/linux/layerscape/patches-4.14/804-i2c-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/804-i2c-support-layerscape.patch @@ -1,15 +1,19 @@ -From 4f22b58a2f809aff55aa9321c9100b0caf3b6694 Mon Sep 17 00:00:00 2001 +From 3f7d59061c38287bdc2fec2e94b4df9e6e62dbc6 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:36 +0800 -Subject: [PATCH 21/40] i2c: support layerscape +Date: Wed, 17 Apr 2019 18:58:39 +0800 +Subject: [PATCH] i2c: support layerscape + This is an integrated patch of i2c for layerscape -Signed-off-by: Zhang Ying-22455 Signed-off-by: Biwen Li +Signed-off-by: Laurentiu Tudor +Signed-off-by: Oleksij Rempel +Signed-off-by: Wolfram Sang +Signed-off-by: Zhang Ying-22455 --- - drivers/i2c/busses/i2c-imx.c | 193 ++++++++++++++++++++++++++++ - drivers/i2c/muxes/i2c-mux-pca954x.c | 44 ++++++- - 2 files changed, 236 insertions(+), 1 deletion(-) + drivers/i2c/busses/i2c-imx.c | 245 +++++++++++++++++++++++++--- + drivers/i2c/muxes/i2c-mux-pca954x.c | 44 ++++- + 2 files changed, 268 insertions(+), 21 deletions(-) --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -93,7 +97,84 @@ Signed-off-by: Biwen Li }; static const struct imx_i2c_hwdata imx1_i2c_hwdata = { -@@ -878,6 +937,78 @@ static int i2c_imx_read(struct imx_i2c_s +@@ -281,8 +340,8 @@ static inline unsigned char imx_i2c_read + } + + /* Functions for DMA support */ +-static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, +- dma_addr_t phy_addr) ++static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, ++ dma_addr_t phy_addr) + { + struct imx_i2c_dma *dma; + struct dma_slave_config dma_sconfig; +@@ -291,11 +350,13 @@ static void i2c_imx_dma_request(struct i + + dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); + if (!dma) +- return; ++ return -ENOMEM; + +- dma->chan_tx = dma_request_slave_channel(dev, "tx"); +- if (!dma->chan_tx) { +- dev_dbg(dev, "can't request DMA tx channel\n"); ++ dma->chan_tx = dma_request_chan(dev, "tx"); ++ if (IS_ERR(dma->chan_tx)) { ++ ret = PTR_ERR(dma->chan_tx); ++ if (ret != -ENODEV && ret != -EPROBE_DEFER) ++ dev_err(dev, "can't request DMA tx channel (%d)\n", ret); + goto fail_al; + } + +@@ -306,13 +367,15 @@ static void i2c_imx_dma_request(struct i + dma_sconfig.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig); + if (ret < 0) { +- dev_dbg(dev, "can't configure tx channel\n"); ++ dev_err(dev, "can't configure tx channel (%d)\n", ret); + goto fail_tx; + } + +- dma->chan_rx = dma_request_slave_channel(dev, "rx"); +- if (!dma->chan_rx) { +- dev_dbg(dev, "can't request DMA rx channel\n"); ++ dma->chan_rx = dma_request_chan(dev, "rx"); ++ if (IS_ERR(dma->chan_rx)) { ++ ret = PTR_ERR(dma->chan_rx); ++ if (ret != -ENODEV && ret != -EPROBE_DEFER) ++ dev_err(dev, "can't request DMA rx channel (%d)\n", ret); + goto fail_tx; + } + +@@ -323,7 +386,7 @@ static void i2c_imx_dma_request(struct i + dma_sconfig.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig); + if (ret < 0) { +- dev_dbg(dev, "can't configure rx channel\n"); ++ dev_err(dev, "can't configure rx channel (%d)\n", ret); + goto fail_rx; + } + +@@ -332,7 +395,7 @@ static void i2c_imx_dma_request(struct i + dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n", + dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx)); + +- return; ++ return 0; + + fail_rx: + dma_release_channel(dma->chan_rx); +@@ -340,7 +403,8 @@ fail_tx: + dma_release_channel(dma->chan_tx); + fail_al: + devm_kfree(dev, dma); +- dev_info(dev, "can't use DMA, using PIO instead.\n"); ++ /* return successfully if there is no dma support */ ++ return ret == -ENODEV ? 0 : ret; + } + + static void i2c_imx_dma_callback(void *arg) +@@ -878,6 +942,78 @@ static int i2c_imx_read(struct imx_i2c_s return 0; } @@ -172,7 +253,7 @@ Signed-off-by: Biwen Li static int i2c_imx_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) { -@@ -888,6 +1019,19 @@ static int i2c_imx_xfer(struct i2c_adapt +@@ -888,6 +1024,19 @@ static int i2c_imx_xfer(struct i2c_adapt dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); @@ -192,7 +273,7 @@ Signed-off-by: Biwen Li result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent); if (result < 0) goto out; -@@ -1030,6 +1174,50 @@ static int i2c_imx_init_recovery_info(st +@@ -1030,6 +1179,50 @@ static int i2c_imx_init_recovery_info(st return 0; } @@ -243,7 +324,7 @@ Signed-off-by: Biwen Li static u32 i2c_imx_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL -@@ -1085,6 +1273,11 @@ static int i2c_imx_probe(struct platform +@@ -1085,6 +1278,11 @@ static int i2c_imx_probe(struct platform i2c_imx->adapter.dev.of_node = pdev->dev.of_node; i2c_imx->base = base; @@ -255,6 +336,54 @@ Signed-off-by: Biwen Li /* Get I2C clock */ i2c_imx->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(i2c_imx->clk)) { +@@ -1103,7 +1301,8 @@ static int i2c_imx_probe(struct platform + pdev->name, i2c_imx); + if (ret) { + dev_err(&pdev->dev, "can't claim irq %d\n", irq); +- goto clk_disable; ++ clk_disable_unprepare(i2c_imx->clk); ++ return ret; + } + + /* Init queue */ +@@ -1150,25 +1349,31 @@ static int i2c_imx_probe(struct platform + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + ++ /* Init DMA config if supported */ ++ ret = i2c_imx_dma_request(i2c_imx, phy_addr); ++ if (ret) { ++ if (ret != -EPROBE_DEFER) ++ dev_info(&pdev->dev, "can't use DMA, using PIO instead.\n"); ++ else ++ goto del_adapter; ++ } ++ + dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq); + dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res); + dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", + i2c_imx->adapter.name); +- dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); +- +- /* Init DMA config if supported */ +- i2c_imx_dma_request(i2c_imx, phy_addr); + ++ dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); + return 0; /* Return OK */ + ++del_adapter: ++ i2c_del_adapter(&i2c_imx->adapter); + rpm_disable: + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + +-clk_disable: +- clk_disable_unprepare(i2c_imx->clk); + return ret; + } + --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -85,6 +85,7 @@ struct pca954x { diff --git a/target/linux/layerscape/patches-4.14/805-qe-support-layerscape.patch b/target/linux/layerscape/patches-4.14/805-qe-support-layerscape.patch index 141677c08d..0a6ad579ff 100644 --- a/target/linux/layerscape/patches-4.14/805-qe-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/805-qe-support-layerscape.patch @@ -1,16 +1,17 @@ -From cfa7e6ed5a6ba529097ae8a50ed2c8fa12b4cad0 Mon Sep 17 00:00:00 2001 +From f4e3e2cf6484056225385d717da4e9c4f8613935 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:27:13 +0800 -Subject: [PATCH 22/40] qe: support layerscape +Date: Wed, 17 Apr 2019 18:58:58 +0800 +Subject: [PATCH] qe: support layerscape + This is an integrated patch of qe for layerscape -Signed-off-by: Zhao Qiang +Signed-off-by: Zhao Qiang --- .../fsl/qe/qe_ic.c => irqchip/irq-qeic.c} | 389 +++++++++++------- drivers/soc/fsl/qe/Kconfig | 2 +- drivers/soc/fsl/qe/Makefile | 2 +- - drivers/soc/fsl/qe/qe.c | 78 ++-- + drivers/soc/fsl/qe/qe.c | 80 ++-- drivers/soc/fsl/qe/qe_ic.h | 103 ----- drivers/soc/fsl/qe/qe_io.c | 42 +- drivers/soc/fsl/qe/qe_tdm.c | 8 +- @@ -19,7 +20,7 @@ Signed-off-by: Biwen Li drivers/tty/serial/ucc_uart.c | 1 + include/soc/fsl/qe/qe.h | 1 - include/soc/fsl/qe/qe_ic.h | 139 ------- - 12 files changed, 357 insertions(+), 492 deletions(-) + 12 files changed, 359 insertions(+), 492 deletions(-) rename drivers/{soc/fsl/qe/qe_ic.c => irqchip/irq-qeic.c} (54%) delete mode 100644 drivers/soc/fsl/qe/qe_ic.h delete mode 100644 include/soc/fsl/qe/qe_ic.h @@ -1266,7 +1267,16 @@ Signed-off-by: Biwen Li of_node_put(qe); -@@ -236,7 +254,7 @@ int qe_setbrg(enum qe_clock brg, unsigne +@@ -229,14 +247,16 @@ int qe_setbrg(enum qe_clock brg, unsigne + /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says + that the BRG divisor must be even if you're not using divide-by-16 + mode. */ ++#ifdef CONFIG_PPC + if (pvr_version_is(PVR_VER_836x) || pvr_version_is(PVR_VER_832x)) + if (!div16 && (divisor & 1) && (divisor > 3)) + divisor++; ++#endif + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE | div16; @@ -1275,7 +1285,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -370,9 +388,9 @@ static int qe_sdma_init(void) +@@ -370,9 +390,9 @@ static int qe_sdma_init(void) return -ENOMEM; } @@ -1288,7 +1298,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -410,14 +428,14 @@ static void qe_upload_microcode(const vo +@@ -410,14 +430,14 @@ static void qe_upload_microcode(const vo "uploading microcode '%s'\n", ucode->id); /* Use auto-increment */ @@ -1307,7 +1317,7 @@ Signed-off-by: Biwen Li } /* -@@ -502,7 +520,7 @@ int qe_upload_firmware(const struct qe_f +@@ -502,7 +522,7 @@ int qe_upload_firmware(const struct qe_f * If the microcode calls for it, split the I-RAM. */ if (!firmware->split) @@ -1316,7 +1326,7 @@ Signed-off-by: Biwen Li if (firmware->soc.model) printk(KERN_INFO -@@ -536,11 +554,11 @@ int qe_upload_firmware(const struct qe_f +@@ -536,11 +556,11 @@ int qe_upload_firmware(const struct qe_f u32 trap = be32_to_cpu(ucode->traps[j]); if (trap) @@ -1330,7 +1340,7 @@ Signed-off-by: Biwen Li } qe_firmware_uploaded = 1; -@@ -659,9 +677,9 @@ EXPORT_SYMBOL(qe_get_num_of_risc); +@@ -659,9 +679,9 @@ EXPORT_SYMBOL(qe_get_num_of_risc); unsigned int qe_get_num_of_snums(void) { struct device_node *qe; @@ -1342,7 +1352,7 @@ Signed-off-by: Biwen Li num_of_snums = 28; /* The default number of snum for threads is 28 */ qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); -@@ -675,9 +693,9 @@ unsigned int qe_get_num_of_snums(void) +@@ -675,9 +695,9 @@ unsigned int qe_get_num_of_snums(void) return num_of_snums; } diff --git a/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch b/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch index 03e84637f1..ea39a1433c 100644 --- a/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch @@ -1,14 +1,18 @@ -From 01b1b2989e907305d8b885468c2743f5e35e1b9a Mon Sep 17 00:00:00 2001 +From ca86ebf3fddbdfa8aecc4b887ef059948ee79621 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Thu, 13 Dec 2018 11:15:15 +0800 +Date: Wed, 17 Apr 2019 18:59:08 +0800 Subject: [PATCH] usb: support layerscape This is an integrated patch of usb for layerscape +Signed-off-by: Anurag Kumar Vulisha +Signed-off-by: Biwen Li Signed-off-by: Catalin Marinas Signed-off-by: Changming Huang Signed-off-by: Felipe Balbi +Signed-off-by: Greg Kroah-Hartman Signed-off-by: Li Yang +Signed-off-by: Marc Zyngier Signed-off-by: Nikhil Badola Signed-off-by: Rajesh Bhagat Signed-off-by: Ramneek Mehresh @@ -16,50 +20,37 @@ Signed-off-by: Ran Wang Signed-off-by: Roger Quadros Signed-off-by: Shengzhou Liu Signed-off-by: Suresh Gupta -Signed-off-by: yinbo.zhu -Signed-off-by: Zhao Chenhui -Signed-off-by: Biwen Li Signed-off-by: Yangbo Lu +Signed-off-by: Yinbo Zhu +Signed-off-by: Zhao Chenhui --- - .../devicetree/bindings/usb/dwc3.txt | 2 + - arch/arm64/include/asm/io.h | 28 ++ - drivers/usb/common/common.c | 50 ++++ - drivers/usb/core/usb.c | 1 + - drivers/usb/dwc3/core.c | 104 +++++++ - drivers/usb/dwc3/core.h | 44 +++ - drivers/usb/dwc3/ep0.c | 4 +- - drivers/usb/dwc3/gadget.c | 7 + - drivers/usb/dwc3/host.c | 9 + - drivers/usb/gadget/udc/fsl_udc_core.c | 46 +-- - drivers/usb/gadget/udc/fsl_usb2_udc.h | 16 +- - drivers/usb/host/Kconfig | 2 +- - drivers/usb/host/ehci-fsl.c | 276 ++++++++++++++++-- - drivers/usb/host/ehci-fsl.h | 3 + - drivers/usb/host/ehci-hub.c | 2 + - drivers/usb/host/ehci.h | 3 + - drivers/usb/host/fsl-mph-dr-of.c | 11 + - drivers/usb/host/xhci-hub.c | 22 ++ - drivers/usb/host/xhci-plat.c | 16 +- - drivers/usb/host/xhci-ring.c | 28 +- - drivers/usb/host/xhci.c | 39 ++- - drivers/usb/host/xhci.h | 6 +- - drivers/usb/phy/phy-fsl-usb.c | 59 +++- - drivers/usb/phy/phy-fsl-usb.h | 8 + - include/linux/usb.h | 1 + - include/linux/usb/of.h | 2 + - 26 files changed, 704 insertions(+), 85 deletions(-) + arch/arm64/include/asm/io.h | 28 +++ + drivers/usb/common/common.c | 50 +++++ + drivers/usb/core/usb.c | 1 + + drivers/usb/dwc3/core.c | 167 ++++++++++++++++ + drivers/usb/dwc3/core.h | 58 ++++++ + drivers/usb/dwc3/ep0.c | 4 +- + drivers/usb/dwc3/gadget.c | 7 + + drivers/usb/dwc3/host.c | 9 + + drivers/usb/gadget/udc/fsl_udc_core.c | 46 +++-- + drivers/usb/gadget/udc/fsl_usb2_udc.h | 16 +- + drivers/usb/host/Kconfig | 2 +- + drivers/usb/host/ehci-fsl.c | 276 +++++++++++++++++++++++--- + drivers/usb/host/ehci-fsl.h | 3 + + drivers/usb/host/ehci-hub.c | 2 + + drivers/usb/host/ehci.h | 3 + + drivers/usb/host/fsl-mph-dr-of.c | 11 + + drivers/usb/host/xhci-hub.c | 22 ++ + drivers/usb/host/xhci-plat.c | 16 +- + drivers/usb/host/xhci-ring.c | 28 ++- + drivers/usb/host/xhci.c | 37 +++- + drivers/usb/host/xhci.h | 10 +- + drivers/usb/phy/phy-fsl-usb.c | 59 ++++-- + drivers/usb/phy/phy-fsl-usb.h | 8 + + include/linux/usb.h | 1 + + include/linux/usb/of.h | 2 + + 25 files changed, 780 insertions(+), 86 deletions(-) ---- a/Documentation/devicetree/bindings/usb/dwc3.txt -+++ b/Documentation/devicetree/bindings/usb/dwc3.txt -@@ -47,6 +47,8 @@ Optional properties: - from P0 to P1/P2/P3 without delay. - - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check - during HS transmit. -+ - snps,disable_devinit_u1u2: when set, disable device-initiated U1/U2 -+ LPM request in USB device mode. - - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal - utmi_l1_suspend_n, false when asserts utmi_sleep_n - - snps,hird-threshold: HIRD threshold --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -210,6 +210,34 @@ extern void __iomem *ioremap_cache(phys_ @@ -168,7 +159,65 @@ Signed-off-by: Yangbo Lu atomic_set(&dev->urbnum, 0); --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c -@@ -766,6 +766,96 @@ static void dwc3_core_setup_global_contr +@@ -103,6 +103,41 @@ static int dwc3_get_dr_mode(struct dwc3 + static void dwc3_event_buffers_cleanup(struct dwc3 *dwc); + static int dwc3_event_buffers_setup(struct dwc3 *dwc); + ++/* ++ * dwc3_power_of_all_roothub_ports - Power off all Root hub ports ++ * @dwc3: Pointer to our controller context structure ++ */ ++static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc) ++{ ++ int i, port_num; ++ u32 reg, op_regs_base, offset; ++ void __iomem *xhci_regs; ++ ++ /* xhci regs is not mapped yet, do it temperary here */ ++ if (dwc->xhci_resources[0].start) { ++ xhci_regs = ioremap(dwc->xhci_resources[0].start, ++ DWC3_XHCI_REGS_END); ++ if (IS_ERR(xhci_regs)) { ++ dev_err(dwc->dev, "Failed to ioremap xhci_regs\n"); ++ return; ++ } ++ ++ op_regs_base = HC_LENGTH(readl(xhci_regs)); ++ reg = readl(xhci_regs + XHCI_HCSPARAMS1); ++ port_num = HCS_MAX_PORTS(reg); ++ ++ for (i = 1; i <= port_num; i++) { ++ offset = op_regs_base + XHCI_PORTSC_BASE + 0x10*(i-1); ++ reg = readl(xhci_regs + offset); ++ reg &= ~PORT_POWER; ++ writel(reg, xhci_regs + offset); ++ } ++ ++ iounmap(xhci_regs); ++ } else ++ dev_err(dwc->dev, "xhci base reg invalid\n"); ++} ++ + static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) + { + u32 reg; +@@ -111,6 +146,15 @@ static void dwc3_set_prtcap(struct dwc3 + reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); + reg |= DWC3_GCTL_PRTCAPDIR(mode); + dwc3_writel(dwc->regs, DWC3_GCTL, reg); ++ ++ /* ++ * We have to power off all Root hub ports immediately after DWC3 set ++ * to host mode to avoid VBUS glitch happen when xhci get reset later. ++ */ ++ if (dwc->host_vbus_glitches) { ++ if (mode == DWC3_GCTL_PRTCAP_HOST) ++ dwc3_power_off_all_roothub_ports(dwc); ++ } + } + + static void __dwc3_set_mode(struct work_struct *work) +@@ -766,6 +810,96 @@ static void dwc3_core_setup_global_contr static int dwc3_core_get_phy(struct dwc3 *dwc); static int dwc3_core_ulpi_init(struct dwc3 *dwc); @@ -265,7 +314,7 @@ Signed-off-by: Yangbo Lu /** * dwc3_core_init - Low-level initialization of DWC3 Core * @dwc: Pointer to our controller context structure -@@ -828,6 +918,8 @@ static int dwc3_core_init(struct dwc3 *d +@@ -828,6 +962,8 @@ static int dwc3_core_init(struct dwc3 *d /* Adjust Frame Length */ dwc3_frame_length_adjustment(dwc); @@ -274,7 +323,30 @@ Signed-off-by: Yangbo Lu usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); ret = phy_power_on(dwc->usb2_generic_phy); -@@ -1074,6 +1166,8 @@ static void dwc3_get_properties(struct d +@@ -871,6 +1007,22 @@ static int dwc3_core_init(struct dwc3 *d + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } + ++ if (dwc->dr_mode == USB_DR_MODE_HOST || ++ dwc->dr_mode == USB_DR_MODE_OTG) { ++ reg = dwc3_readl(dwc->regs, DWC3_GUCTL); ++ ++ /* ++ * Enable Auto retry Feature to make the controller operating in ++ * Host mode on seeing transaction errors(CRC errors or internal ++ * overrun scenerios) on IN transfers to reply to the device ++ * with a non-terminating retry ACK (i.e, an ACK transcation ++ * packet with Retry=1 & Nump != 0) ++ */ ++ reg |= DWC3_GUCTL_HSTINAUTORETRY; ++ ++ dwc3_writel(dwc->regs, DWC3_GUCTL, reg); ++ } ++ + return 0; + + err4: +@@ -1074,6 +1226,8 @@ static void dwc3_get_properties(struct d &hird_threshold); dwc->usb3_lpm_capable = device_property_read_bool(dev, "snps,usb3_lpm_capable"); @@ -283,7 +355,7 @@ Signed-off-by: Yangbo Lu dwc->disable_scramble_quirk = device_property_read_bool(dev, "snps,disable_scramble_quirk"); -@@ -1106,8 +1200,16 @@ static void dwc3_get_properties(struct d +@@ -1106,8 +1260,16 @@ static void dwc3_get_properties(struct d dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); @@ -300,7 +372,17 @@ Signed-off-by: Yangbo Lu device_property_read_u8(dev, "snps,tx_de_emphasis", &tx_de_emphasis); device_property_read_string(dev, "snps,hsphy_interface", -@@ -1365,12 +1467,14 @@ static int dwc3_resume_common(struct dwc +@@ -1115,6 +1277,9 @@ static void dwc3_get_properties(struct d + device_property_read_u32(dev, "snps,quirk-frame-length-adjustment", + &dwc->fladj); + ++ dwc->host_vbus_glitches = device_property_read_bool(dev, ++ "snps,host-vbus-glitches"); ++ + dwc->lpm_nyet_threshold = lpm_nyet_threshold; + dwc->tx_de_emphasis = tx_de_emphasis; + +@@ -1365,12 +1530,14 @@ static int dwc3_resume_common(struct dwc switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: @@ -350,7 +432,32 @@ Signed-off-by: Yangbo Lu /* Global Debug Queue/FIFO Space Available Register */ #define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f) #define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0) -@@ -788,6 +814,7 @@ struct dwc3_scratchpad_array { +@@ -205,6 +231,9 @@ + #define DWC3_GCTL_GBLHIBERNATIONEN BIT(1) + #define DWC3_GCTL_DSBLCLKGTNG BIT(0) + ++/* Global User Control Register */ ++#define DWC3_GUCTL_HSTINAUTORETRY BIT(14) ++ + /* Global User Control 1 Register */ + #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) + #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) +@@ -477,6 +506,14 @@ + #define DWC3_DEV_IMOD_INTERVAL_SHIFT 0 + #define DWC3_DEV_IMOD_INTERVAL_MASK (0xffff << 0) + ++/* Partial XHCI Register and Bit fields for quirk */ ++#define XHCI_HCSPARAMS1 0x4 ++#define XHCI_PORTSC_BASE 0x400 ++#define PORT_POWER (1 << 9) ++#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f) ++#define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff) ++#define HC_LENGTH(p) XHCI_HC_LENGTH(p) ++ + /* Structures */ + + struct dwc3_trb; +@@ -788,6 +825,7 @@ struct dwc3_scratchpad_array { * @regs: base address for our registers * @regs_size: address space size * @fladj: frame length adjustment @@ -358,7 +465,7 @@ Signed-off-by: Yangbo Lu * @irq_gadget: peripheral controller's IRQ number * @nr_scratch: number of scratch buffers * @u1u2: only used on revisions <1.83a for workaround -@@ -843,6 +870,7 @@ struct dwc3_scratchpad_array { +@@ -843,6 +881,7 @@ struct dwc3_scratchpad_array { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @three_stage_setup: set if we perform a three phase setup * @usb3_lpm_capable: set if hadrware supports Link Power Management @@ -366,7 +473,7 @@ Signed-off-by: Yangbo Lu * @disable_scramble_quirk: set if we enable the disable scramble quirk * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk -@@ -869,6 +897,11 @@ struct dwc3_scratchpad_array { +@@ -869,6 +908,13 @@ struct dwc3_scratchpad_array { * 1 - -3.5dB de-emphasis * 2 - No de-emphasis * 3 - Reserved @@ -375,10 +482,12 @@ Signed-off-by: Yangbo Lu + * @quirk_stop_transfer_in_block: prevent block transmission from being + * interrupted + * @quirk_stop_ep_in_u1: replace stop commad with disable slot command ++ * @host-vbus-glitches: set to avoid vbus glitch during ++ * xhci reset. * @imod_interval: set the interrupt moderation interval in 250ns * increments or 0 to disable. */ -@@ -921,6 +954,12 @@ struct dwc3 { +@@ -921,6 +967,12 @@ struct dwc3 { enum usb_phy_interface hsphy_mode; u32 fladj; @@ -391,7 +500,7 @@ Signed-off-by: Yangbo Lu u32 irq_gadget; u32 nr_scratch; u32 u1u2; -@@ -1005,6 +1044,7 @@ struct dwc3 { +@@ -1005,6 +1057,7 @@ struct dwc3 { unsigned setup_packet_pending:1; unsigned three_stage_setup:1; unsigned usb3_lpm_capable:1; @@ -399,7 +508,7 @@ Signed-off-by: Yangbo Lu unsigned disable_scramble_quirk:1; unsigned u2exit_lfps_quirk:1; -@@ -1024,6 +1064,10 @@ struct dwc3 { +@@ -1024,6 +1077,11 @@ struct dwc3 { unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; @@ -407,6 +516,7 @@ Signed-off-by: Yangbo Lu + unsigned quirk_reverse_in_out:1; + unsigned quirk_stop_transfer_in_block:1; + unsigned quirk_stop_ep_in_u1:1; ++ unsigned host_vbus_glitches:1; u16 imod_interval; }; @@ -1298,15 +1408,6 @@ Signed-off-by: Yangbo Lu } done: spin_unlock_irqrestore(&xhci->lock, flags); -@@ -4988,7 +5013,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, - return retval; - xhci_dbg(xhci, "Called HCD init\n"); - -- xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%016llx\n", -+ xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%llx\n", - xhci->hcc_params, xhci->hci_version, xhci->quirks); - - return 0; --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1794,7 +1794,7 @@ struct xhci_hcd { @@ -1314,7 +1415,7 @@ Signed-off-by: Yangbo Lu #define XHCI_STATE_HALTED (1 << 1) #define XHCI_STATE_REMOVING (1 << 2) - unsigned long long quirks; -+ u64 quirks; ++ unsigned long long quirks; #define XHCI_LINK_TRB_QUIRK BIT_ULL(0) #define XHCI_RESET_EP_QUIRK BIT_ULL(1) #define XHCI_NEC_HOST BIT_ULL(2) @@ -1328,11 +1429,15 @@ Signed-off-by: Yangbo Lu /* For controller with a broken Port Disable implementation */ #define XHCI_BROKEN_PORT_PED BIT_ULL(25) #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26) -@@ -1840,6 +1843,7 @@ struct xhci_hcd { +@@ -1838,8 +1841,9 @@ struct xhci_hcd { + #define XHCI_HW_LPM_DISABLE BIT_ULL(29) + #define XHCI_SUSPEND_DELAY BIT_ULL(30) #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) - #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) - #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) -+#define XHCI_DIS_U1U2_WHEN_U3 BIT(36) +-#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) +-#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) ++#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(35) ++#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(36) ++#define XHCI_DIS_U1U2_WHEN_U3 BIT(37) unsigned int num_active_eps; unsigned int limit_active_eps; diff --git a/target/linux/layerscape/patches-4.14/808-vfio-support-layerscape.patch b/target/linux/layerscape/patches-4.14/808-vfio-support-layerscape.patch index 9083c70ca5..c2424a41f0 100644 --- a/target/linux/layerscape/patches-4.14/808-vfio-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/808-vfio-support-layerscape.patch @@ -1,21 +1,24 @@ -From 92f0ef51270b2961f63b2e985831f5e9a6251a2f Mon Sep 17 00:00:00 2001 +From 03ce521cd071706f755e3d2304ab1b8c47fd4910 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:29:03 +0800 -Subject: [PATCH 25/40] vfio: support layerscape +Date: Wed, 17 Apr 2019 18:59:09 +0800 +Subject: [PATCH] vfio: support layerscape + This is an integrated patch of vfio for layerscape Signed-off-by: Bharat Bhushan Signed-off-by: Biwen Li +Signed-off-by: Roy Pledge +Signed-off-by: Yangbo Lu --- drivers/vfio/Kconfig | 1 + drivers/vfio/Makefile | 1 + drivers/vfio/fsl-mc/Kconfig | 9 + drivers/vfio/fsl-mc/Makefile | 2 + - drivers/vfio/fsl-mc/vfio_fsl_mc.c | 751 ++++++++++++++++++++++ + drivers/vfio/fsl-mc/vfio_fsl_mc.c | 759 ++++++++++++++++++++++ drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c | 199 ++++++ - drivers/vfio/fsl-mc/vfio_fsl_mc_private.h | 55 ++ + drivers/vfio/fsl-mc/vfio_fsl_mc_private.h | 57 ++ include/uapi/linux/vfio.h | 1 + - 8 files changed, 1019 insertions(+) + 8 files changed, 1029 insertions(+) create mode 100644 drivers/vfio/fsl-mc/Kconfig create mode 100644 drivers/vfio/fsl-mc/Makefile create mode 100644 drivers/vfio/fsl-mc/vfio_fsl_mc.c @@ -56,7 +59,7 @@ Signed-off-by: Biwen Li +obj-$(CONFIG_VFIO_FSL_MC) += vfio_fsl_mc.o vfio_fsl_mc_intr.o --- /dev/null +++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c -@@ -0,0 +1,751 @@ +@@ -0,0 +1,759 @@ +/* + * Freescale Management Complex (MC) device passthrough using VFIO + * @@ -118,6 +121,10 @@ Signed-off-by: Biwen Li + if (mc_dev->regions[i].flags & IORESOURCE_CACHEABLE) + vdev->regions[i].type |= + VFIO_FSL_MC_REGION_TYPE_CACHEABLE; ++ if (mc_dev->regions[i].flags & IORESOURCE_MEM) ++ vdev->regions[i].type |= ++ VFIO_FSL_MC_REGION_TYPE_SHAREABLE; ++ + vdev->regions[i].flags = VFIO_REGION_INFO_FLAG_MMAP; + vdev->regions[i].flags |= VFIO_REGION_INFO_FLAG_READ; + if (!(mc_dev->regions[i].flags & IORESOURCE_READONLY)) @@ -390,9 +397,7 @@ Signed-off-by: Biwen Li + u64 header; + struct mc_cmd_header *resp_hdr; + -+ __iormb(); -+ header = readq(ioaddr); -+ __iormb(); ++ header = cpu_to_le64(readq_relaxed(ioaddr)); + + resp_hdr = (struct mc_cmd_header *)&header; + status = (enum mc_cmd_status)resp_hdr->status; @@ -412,9 +417,12 @@ Signed-off-by: Biwen Li +{ + int i; + -+ /* Write at command header in the end */ -+ for (i = 7; i >= 0; i--) -+ writeq(cmd_data[i], ioaddr + i * sizeof(uint64_t)); ++ /* Write at command parameter into portal */ ++ for (i = 7; i >= 1; i--) ++ writeq_relaxed(cmd_data[i], ioaddr + i * sizeof(uint64_t)); ++ ++ /* Write command header in the end */ ++ writeq(cmd_data[0], ioaddr); + + /* Wait for response before returning to user-space + * This can be optimized in future to even prepare response @@ -499,9 +507,12 @@ Signed-off-by: Biwen Li + * cache inhibited area of the portal to avoid coherency issues + * if a user migrates to another core. + */ -+ if (region.type & VFIO_FSL_MC_REGION_TYPE_CACHEABLE) -+ vma->vm_page_prot = pgprot_cached_ns(vma->vm_page_prot); -+ else ++ if (region.type & VFIO_FSL_MC_REGION_TYPE_CACHEABLE) { ++ if (region.type & VFIO_FSL_MC_REGION_TYPE_SHAREABLE) ++ vma->vm_page_prot = pgprot_cached(vma->vm_page_prot); ++ else ++ vma->vm_page_prot = pgprot_cached_ns(vma->vm_page_prot); ++ } else + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + vma->vm_pgoff = (region.addr >> PAGE_SHIFT) + pgoff; @@ -1012,7 +1023,7 @@ Signed-off-by: Biwen Li +} --- /dev/null +++ b/drivers/vfio/fsl-mc/vfio_fsl_mc_private.h -@@ -0,0 +1,55 @@ +@@ -0,0 +1,57 @@ +/* + * Freescale Management Complex VFIO private declarations + * @@ -1047,6 +1058,8 @@ Signed-off-by: Biwen Li + u32 flags; +#define VFIO_FSL_MC_REGION_TYPE_MMIO 1 +#define VFIO_FSL_MC_REGION_TYPE_CACHEABLE 2 ++#define VFIO_FSL_MC_REGION_TYPE_SHAREABLE 4 ++ + u32 type; + u64 addr; + resource_size_t size; diff --git a/target/linux/layerscape/patches-4.14/811-clock-support-layerscape.patch b/target/linux/layerscape/patches-4.14/811-clock-support-layerscape.patch index dcd1535601..331c77c80a 100644 --- a/target/linux/layerscape/patches-4.14/811-clock-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/811-clock-support-layerscape.patch @@ -1,14 +1,18 @@ -From d94f8863307c0f7fb7aeb2084cc666c47991d78b Mon Sep 17 00:00:00 2001 +From a00c035c7b82f51716a1a30637b1bd276dee3c5a Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Mon, 19 Nov 2018 10:26:57 +0800 +Date: Wed, 17 Apr 2019 18:58:17 +0800 Subject: [PATCH] clock: support layerscape + This is an integrated patch of clock for layerscape -Signed-off-by: Tang Yuantian Signed-off-by: Biwen Li +Signed-off-by: Tang Yuantian +Signed-off-by: Vabhav Sharma +Signed-off-by: Yogesh Gaur --- - drivers/clk/clk-qoriq.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) + drivers/clk/clk-qoriq.c | 25 ++++++++++++++++++++++--- + drivers/cpufreq/qoriq-cpufreq.c | 1 + + 2 files changed, 23 insertions(+), 3 deletions(-) --- a/drivers/clk/clk-qoriq.c +++ b/drivers/clk/clk-qoriq.c @@ -21,7 +25,43 @@ Signed-off-by: Biwen Li }; #define CLKSEL_VALID 1 -@@ -1127,6 +1127,13 @@ static void __init create_one_pll(struct +@@ -79,7 +79,7 @@ struct clockgen_chipinfo { + const struct clockgen_muxinfo *cmux_groups[2]; + const struct clockgen_muxinfo *hwaccel[NUM_HWACCEL]; + void (*init_periph)(struct clockgen *cg); +- int cmux_to_group[NUM_CMUX]; /* -1 terminates if fewer than NUM_CMUX */ ++ int cmux_to_group[NUM_CMUX+1]; /* array should be -1 terminated */ + u32 pll_mask; /* 1 << n bit set if PLL n is valid */ + u32 flags; /* CG_xxx */ + }; +@@ -570,6 +570,17 @@ static const struct clockgen_chipinfo ch + .flags = CG_VER3 | CG_LITTLE_ENDIAN, + }, + { ++ .compat = "fsl,lx2160a-clockgen", ++ .cmux_groups = { ++ &clockgen2_cmux_cga12, &clockgen2_cmux_cgb ++ }, ++ .cmux_to_group = { ++ 0, 0, 0, 0, 1, 1, 1, 1, -1 ++ }, ++ .pll_mask = 0x37, ++ .flags = CG_VER3 | CG_LITTLE_ENDIAN, ++ }, ++ { + .compat = "fsl,p2041-clockgen", + .guts_compat = "fsl,qoriq-device-config-1.0", + .init_periph = p2041_init_periph, +@@ -601,7 +612,7 @@ static const struct clockgen_chipinfo ch + &p4080_cmux_grp1, &p4080_cmux_grp2 + }, + .cmux_to_group = { +- 0, 0, 0, 0, 1, 1, 1, 1 ++ 0, 0, 0, 0, 1, 1, 1, 1, -1 + }, + .pll_mask = 0x1f, + }, +@@ -1127,6 +1138,13 @@ static void __init create_one_pll(struct struct clk *clk; int ret; @@ -35,3 +75,21 @@ Signed-off-by: Biwen Li snprintf(pll->div[i].name, sizeof(pll->div[i].name), "cg-pll%d-div%d", idx, i + 1); +@@ -1417,6 +1435,7 @@ CLK_OF_DECLARE(qoriq_clockgen_ls1043a, " + CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls1088a, "fsl,ls1088a-clockgen", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init); ++CLK_OF_DECLARE(qoriq_clockgen_lx2160a, "fsl,lx2160a-clockgen", clockgen_init); + + /* Legacy nodes */ + CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init); +--- a/drivers/cpufreq/qoriq-cpufreq.c ++++ b/drivers/cpufreq/qoriq-cpufreq.c +@@ -320,6 +320,7 @@ static const struct of_device_id node_ma + { .compatible = "fsl,ls1046a-clockgen", }, + { .compatible = "fsl,ls1088a-clockgen", }, + { .compatible = "fsl,ls2080a-clockgen", }, ++ { .compatible = "fsl,lx2160a-clockgen", }, + { .compatible = "fsl,p4080-clockgen", }, + { .compatible = "fsl,qoriq-clockgen-1.0", }, + { .compatible = "fsl,qoriq-clockgen-2.0", }, diff --git a/target/linux/layerscape/patches-4.14/812-flexspi-support-layerscape.patch b/target/linux/layerscape/patches-4.14/812-flexspi-support-layerscape.patch index e08cbb4881..3ecec1756e 100644 --- a/target/linux/layerscape/patches-4.14/812-flexspi-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/812-flexspi-support-layerscape.patch @@ -1,182 +1,1576 @@ -From 31d0f8f19246c9a2fbecb5ca0a03ef6bb70eee2d Mon Sep 17 00:00:00 2001 +From 9875df1e872eb2b0f9d2d72c9a761a5f03400d9f Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Fri, 9 Nov 2018 19:32:53 +0800 +Date: Fri, 19 Apr 2019 13:23:01 +0800 Subject: [PATCH] flexspi: support layerscape -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit This is an integrated patch of flexspi for layerscape -Signed-off-by: Alistair Strachan -Signed-off-by: Ariel Elior -Signed-off-by: Brandon Maier -Signed-off-by: David S. Miller -Signed-off-by: Geert Uytterhoeven -Signed-off-by: Greg Kroah-Hartman -Signed-off-by: Joe Thornber -Signed-off-by: Kirill Kapranov -Signed-off-by: Liam Girdwood -Signed-off-by: Marcel Ziswiler -Signed-off-by: Mark Brown -Signed-off-by: Mike Snitzer -Signed-off-by: Peng Li -Signed-off-by: Reinette Chatre -Signed-off-by: Sasha Levin -Signed-off-by: Thomas Gleixner -Signed-off-by: Tomer Tayar -Signed-off-by: Uwe Kleine-König +Signed-off-by: Ashish Kumar Signed-off-by: Biwen Li +Signed-off-by: Rajat Srivastava +Signed-off-by: Yangbo Lu +Signed-off-by: Yogesh Gaur --- - drivers/md/dm-thin.c | 13 +++++++++++++ - drivers/net/ethernet/qlogic/qed/qed_mcp.c | 7 +++++++ - drivers/net/phy/xilinx_gmii2rgmii.c | 5 +++++ - drivers/spi/spi-tegra20-slink.c | 18 ++++++++++++++++++ - drivers/staging/android/ashmem.c | 6 ++++++ - drivers/tty/serial/imx.c | 8 ++++++++ - kernel/events/core.c | 6 ++++++ - sound/soc/soc-dapm.c | 7 +++++++ - 8 files changed, 70 insertions(+) + .../devicetree/bindings/mtd/nxp-flexspi.txt | 41 + + drivers/mtd/spi-nor/Kconfig | 10 + + drivers/mtd/spi-nor/Makefile | 1 + + drivers/mtd/spi-nor/nxp-flexspi.c | 1404 +++++++++++++++++ + drivers/mtd/spi-nor/spi-nor.c | 13 +- + include/linux/mtd/cfi.h | 1 + + include/linux/mtd/spi-nor.h | 3 +- + 7 files changed, 1470 insertions(+), 3 deletions(-) + create mode 100644 Documentation/devicetree/bindings/mtd/nxp-flexspi.txt + create mode 100644 drivers/mtd/spi-nor/nxp-flexspi.c ---- a/drivers/md/dm-thin.c -+++ b/drivers/md/dm-thin.c -@@ -3697,6 +3697,19 @@ static int process_create_thin_mesg(unsi - return r; - } +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/nxp-flexspi.txt +@@ -0,0 +1,41 @@ ++* NXP Flex Serial Peripheral Interface(FlexSPI) ++ ++Required properties: ++ - compatible : Should be "nxp,lx2160a-fspi" ++ - reg : the first contains the register location and length, ++ the second contains the memory mapping address and length ++ - reg-names: Should contain the reg names "FSPI" and "FSPI-memory" ++ - interrupts : Should contain the interrupt for the device ++ - clocks : The clocks needed by the FlexSPI controller ++ - clock-names : Should contain the name of the clocks: "fspi_en" and "fspi" ++ ++Optional properties: ++ - nxp,fspi-has-second-chip: The controller has two buses, bus A and bus B. ++ Each bus can be connected with two NOR flashes. ++ Most of the time, each bus only has one NOR flash ++ connected, this is the default case. ++ But if there are two NOR flashes connected to the ++ bus, you should enable this property. ++ (Please check the board's schematic.) ++Example: ++fspi0: flexspi@20c0000 { ++ compatible = "nxp,lx2160a-fspi"; ++ reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; ++ reg-names = "FSPI", "FSPI-memory"; ++ interrupts = <0 25 0x4>; /* Level high type */ ++ clocks = <&clockgen 4 3>, <&clockgen 4 3>; ++ clock-names = "fspi_en", "fspi"; ++ ++ status = "okay"; ++ nxp,fspi-has-second-chip; ++ flash0: mt35xu512aba@0 { ++ reg = <0>; ++ .... ++ }; ++ ++ flash1: mt35xu512aba@1 { ++ reg = <1>; ++ .... ++ }; ++ ++}; +--- a/drivers/mtd/spi-nor/Kconfig ++++ b/drivers/mtd/spi-nor/Kconfig +@@ -97,6 +97,16 @@ config SPI_NXP_SPIFI + Flash. Enable this option if you have a device with a SPIFI + controller and want to access the Flash as a mtd device. -+ r = dm_pool_get_free_metadata_block_count(pool->pmd, &free_blocks); -+ if (r) { -+ metadata_operation_failed(pool, "dm_pool_get_free_metadata_block_count", r); -+ return r; ++config SPI_NXP_FLEXSPI ++ tristate "NXP Flex SPI controller" ++ help ++ This enables support for the Flex SPI controller in master mode. ++ Up to four slave devices can be connected on two buses with two ++ chipselects each. ++ This controller does not support generic SPI messages and only ++ supports the high-level SPI memory interface using SPI-NOR ++ framework. ++ + config SPI_INTEL_SPI + tristate + +--- a/drivers/mtd/spi-nor/Makefile ++++ b/drivers/mtd/spi-nor/Makefile +@@ -7,6 +7,7 @@ obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-qua + obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o + obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o + obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o ++obj-$(CONFIG_SPI_NXP_FLEXSPI) += nxp-flexspi.o + obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o + obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o + obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o +--- /dev/null ++++ b/drivers/mtd/spi-nor/nxp-flexspi.c +@@ -0,0 +1,1404 @@ ++/* ++ * NXP FSPI(FlexSPI controller) driver. ++ * ++ * Copyright 2018 NXP ++ * Author: Yogesh Gaur ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* The registers */ ++#define FSPI_MCR0 0x00 ++#define FSPI_MCR0_AHB_TIMEOUT_SHIFT 24 ++#define FSPI_MCR0_AHB_TIMEOUT_MASK (0xFF << FSPI_MCR0_AHB_TIMEOUT_SHIFT) ++#define FSPI_MCR0_IP_TIMEOUT_SHIFT 16 ++#define FSPI_MCR0_IP_TIMEOUT_MASK (0xFF << FSPI_MCR0_IP_TIMEOUT_SHIFT) ++#define FSPI_MCR0_LEARN_EN_SHIFT 15 ++#define FSPI_MCR0_LEARN_EN_MASK (1 << FSPI_MCR0_LEARN_EN_SHIFT) ++#define FSPI_MCR0_SCRFRUN_EN_SHIFT 14 ++#define FSPI_MCR0_SCRFRUN_EN_MASK (1 << FSPI_MCR0_SCRFRUN_EN_SHIFT) ++#define FSPI_MCR0_OCTCOMB_EN_SHIFT 13 ++#define FSPI_MCR0_OCTCOMB_EN_MASK (1 << FSPI_MCR0_OCTCOMB_EN_SHIFT) ++#define FSPI_MCR0_DOZE_EN_SHIFT 12 ++#define FSPI_MCR0_DOZE_EN_MASK (1 << FSPI_MCR0_DOZE_EN_SHIFT) ++#define FSPI_MCR0_HSEN_SHIFT 11 ++#define FSPI_MCR0_HSEN_MASK (1 << FSPI_MCR0_HSEN_SHIFT) ++#define FSPI_MCR0_SERCLKDIV_SHIFT 8 ++#define FSPI_MCR0_SERCLKDIV_MASK (7 << FSPI_MCR0_SERCLKDIV_SHIFT) ++#define FSPI_MCR0_ATDF_EN_SHIFT 7 ++#define FSPI_MCR0_ATDF_EN_MASK (1 << FSPI_MCR0_ATDF_EN_SHIFT) ++#define FSPI_MCR0_ARDF_EN_SHIFT 6 ++#define FSPI_MCR0_ARDF_EN_MASK (1 << FSPI_MCR0_ARDF_EN_SHIFT) ++#define FSPI_MCR0_RXCLKSRC_SHIFT 4 ++#define FSPI_MCR0_RXCLKSRC_MASK (3 << FSPI_MCR0_RXCLKSRC_SHIFT) ++#define FSPI_MCR0_END_CFG_SHIFT 2 ++#define FSPI_MCR0_END_CFG_MASK (3 << FSPI_MCR0_END_CFG_SHIFT) ++#define FSPI_MCR0_MDIS_SHIFT 1 ++#define FSPI_MCR0_MDIS_MASK (1 << FSPI_MCR0_MDIS_SHIFT) ++#define FSPI_MCR0_SWRST_SHIFT 0 ++#define FSPI_MCR0_SWRST_MASK (1 << FSPI_MCR0_SWRST_SHIFT) ++ ++#define FSPI_MCR1 0x04 ++#define FSPI_MCR1_SEQ_TIMEOUT_SHIFT 16 ++#define FSPI_MCR1_SEQ_TIMEOUT_MASK \ ++ (0xFFFF << FSPI_MCR1_SEQ_TIMEOUT_SHIFT) ++#define FSPI_MCR1_AHB_TIMEOUT_SHIFT 0 ++#define FSPI_MCR1_AHB_TIMEOUT_MASK \ ++ (0xFFFF << FSPI_MCR1_AHB_TIMEOUT_SHIFT) ++ ++#define FSPI_MCR2 0x08 ++#define FSPI_MCR2_IDLE_WAIT_SHIFT 24 ++#define FSPI_MCR2_IDLE_WAIT_MASK (0xFF << FSPI_MCR2_IDLE_WAIT_SHIFT) ++#define FSPI_MCR2_SAMEFLASH_SHIFT 15 ++#define FSPI_MCR2_SAMEFLASH_MASK (1 << FSPI_MCR2_SAMEFLASH_SHIFT) ++#define FSPI_MCR2_CLRLRPHS_SHIFT 14 ++#define FSPI_MCR2_CLRLRPHS_MASK (1 << FSPI_MCR2_CLRLRPHS_SHIFT) ++#define FSPI_MCR2_ABRDATSZ_SHIFT 8 ++#define FSPI_MCR2_ABRDATSZ_MASK (1 << FSPI_MCR2_ABRDATSZ_SHIFT) ++#define FSPI_MCR2_ABRLEARN_SHIFT 7 ++#define FSPI_MCR2_ABRLEARN_MASK (1 << FSPI_MCR2_ABRLEARN_SHIFT) ++#define FSPI_MCR2_ABR_READ_SHIFT 6 ++#define FSPI_MCR2_ABR_READ_MASK (1 << FSPI_MCR2_ABR_READ_SHIFT) ++#define FSPI_MCR2_ABRWRITE_SHIFT 5 ++#define FSPI_MCR2_ABRWRITE_MASK (1 << FSPI_MCR2_ABRWRITE_SHIFT) ++#define FSPI_MCR2_ABRDUMMY_SHIFT 4 ++#define FSPI_MCR2_ABRDUMMY_MASK (1 << FSPI_MCR2_ABRDUMMY_SHIFT) ++#define FSPI_MCR2_ABR_MODE_SHIFT 3 ++#define FSPI_MCR2_ABR_MODE_MASK (1 << FSPI_MCR2_ABR_MODE_SHIFT) ++#define FSPI_MCR2_ABRCADDR_SHIFT 2 ++#define FSPI_MCR2_ABRCADDR_MASK (1 << FSPI_MCR2_ABRCADDR_SHIFT) ++#define FSPI_MCR2_ABRRADDR_SHIFT 1 ++#define FSPI_MCR2_ABRRADDR_MASK (1 << FSPI_MCR2_ABRRADDR_SHIFT) ++#define FSPI_MCR2_ABR_CMD_SHIFT 0 ++#define FSPI_MCR2_ABR_CMD_MASK (1 << FSPI_MCR2_ABR_CMD_SHIFT) ++ ++#define FSPI_AHBCR 0x0c ++#define FSPI_AHBCR_RDADDROPT_SHIFT 6 ++#define FSPI_AHBCR_RDADDROPT_MASK (1 << FSPI_AHBCR_RDADDROPT_SHIFT) ++#define FSPI_AHBCR_PREF_EN_SHIFT 5 ++#define FSPI_AHBCR_PREF_EN_MASK (1 << FSPI_AHBCR_PREF_EN_SHIFT) ++#define FSPI_AHBCR_BUFF_EN_SHIFT 4 ++#define FSPI_AHBCR_BUFF_EN_MASK (1 << FSPI_AHBCR_BUFF_EN_SHIFT) ++#define FSPI_AHBCR_CACH_EN_SHIFT 3 ++#define FSPI_AHBCR_CACH_EN_MASK (1 << FSPI_AHBCR_CACH_EN_SHIFT) ++#define FSPI_AHBCR_CLRTXBUF_SHIFT 2 ++#define FSPI_AHBCR_CLRTXBUF_MASK (1 << FSPI_AHBCR_CLRTXBUF_SHIFT) ++#define FSPI_AHBCR_CLRRXBUF_SHIFT 1 ++#define FSPI_AHBCR_CLRRXBUF_MASK (1 << FSPI_AHBCR_CLRRXBUF_SHIFT) ++#define FSPI_AHBCR_PAR_EN_SHIFT 0 ++#define FSPI_AHBCR_PAR_EN_MASK (1 << FSPI_AHBCR_PAR_EN_SHIFT) ++ ++#define FSPI_INTEN 0x10 ++#define FSPI_INTEN_SCLKSBWR_SHIFT 9 ++#define FSPI_INTEN_SCLKSBWR_MASK (1 << FSPI_INTEN_SCLKSBWR_SHIFT) ++#define FSPI_INTEN_SCLKSBRD_SHIFT 8 ++#define FSPI_INTEN_SCLKSBRD_MASK (1 << FSPI_INTEN_SCLKSBRD_SHIFT) ++#define FSPI_INTEN_DATALRNFL_SHIFT 7 ++#define FSPI_INTEN_DATALRNFL_MASK (1 << FSPI_INTEN_DATALRNFL_SHIFT) ++#define FSPI_INTEN_IPTXWE_SHIFT 6 ++#define FSPI_INTEN_IPTXWE_MASK (1 << FSPI_INTEN_IPTXWE_SHIFT) ++#define FSPI_INTEN_IPRXWA_SHIFT 5 ++#define FSPI_INTEN_IPRXWA_MASK (1 << FSPI_INTEN_IPRXWA_SHIFT) ++#define FSPI_INTEN_AHBCMDERR_SHIFT 4 ++#define FSPI_INTEN_AHBCMDERR_MASK (1 << FSPI_INTEN_AHBCMDERR_SHIFT) ++#define FSPI_INTEN_IPCMDERR_SHIFT 3 ++#define FSPI_INTEN_IPCMDERR_MASK (1 << FSPI_INTEN_IPCMDERR_SHIFT) ++#define FSPI_INTEN_AHBCMDGE_SHIFT 2 ++#define FSPI_INTEN_AHBCMDGE_MASK (1 << FSPI_INTEN_AHBCMDGE_SHIFT) ++#define FSPI_INTEN_IPCMDGE_SHIFT 1 ++#define FSPI_INTEN_IPCMDGE_MASK (1 << FSPI_INTEN_IPCMDGE_SHIFT) ++#define FSPI_INTEN_IPCMDDONE_SHIFT 0 ++#define FSPI_INTEN_IPCMDDONE_MASK (1 << FSPI_INTEN_IPCMDDONE_SHIFT) ++ ++#define FSPI_INTR 0x14 ++#define FSPI_INTR_SCLKSBWR_SHIFT 9 ++#define FSPI_INTR_SCLKSBWR_MASK (1 << FSPI_INTR_SCLKSBWR_SHIFT) ++#define FSPI_INTR_SCLKSBRD_SHIFT 8 ++#define FSPI_INTR_SCLKSBRD_MASK (1 << FSPI_INTR_SCLKSBRD_SHIFT) ++#define FSPI_INTR_DATALRNFL_SHIFT 7 ++#define FSPI_INTR_DATALRNFL_MASK (1 << FSPI_INTR_DATALRNFL_SHIFT) ++#define FSPI_INTR_IPTXWE_SHIFT 6 ++#define FSPI_INTR_IPTXWE_MASK (1 << FSPI_INTR_IPTXWE_SHIFT) ++#define FSPI_INTR_IPRXWA_SHIFT 5 ++#define FSPI_INTR_IPRXWA_MASK (1 << FSPI_INTR_IPRXWA_SHIFT) ++#define FSPI_INTR_AHBCMDERR_SHIFT 4 ++#define FSPI_INTR_AHBCMDERR_MASK (1 << FSPI_INTR_AHBCMDERR_SHIFT) ++#define FSPI_INTR_IPCMDERR_SHIFT 3 ++#define FSPI_INTR_IPCMDERR_MASK (1 << FSPI_INTR_IPCMDERR_SHIFT) ++#define FSPI_INTR_AHBCMDGE_SHIFT 2 ++#define FSPI_INTR_AHBCMDGE_MASK (1 << FSPI_INTR_AHBCMDGE_SHIFT) ++#define FSPI_INTR_IPCMDGE_SHIFT 1 ++#define FSPI_INTR_IPCMDGE_MASK (1 << FSPI_INTR_IPCMDGE_SHIFT) ++#define FSPI_INTR_IPCMDDONE_SHIFT 0 ++#define FSPI_INTR_IPCMDDONE_MASK (1 << FSPI_INTR_IPCMDDONE_SHIFT) ++ ++#define FSPI_LUTKEY 0x18 ++#define FSPI_LUTKEY_VALUE 0x5AF05AF0 ++ ++#define FSPI_LCKCR 0x1C ++#define FSPI_LCKER_LOCK 0x1 ++#define FSPI_LCKER_UNLOCK 0x2 ++ ++#define FSPI_BUFXCR_INVALID_MSTRID 0xe ++#define FSPI_AHBRX_BUF0CR0 0x20 ++#define FSPI_AHBRX_BUF1CR0 0x24 ++#define FSPI_AHBRX_BUF2CR0 0x28 ++#define FSPI_AHBRX_BUF3CR0 0x2C ++#define FSPI_AHBRX_BUF4CR0 0x30 ++#define FSPI_AHBRX_BUF5CR0 0x34 ++#define FSPI_AHBRX_BUF6CR0 0x38 ++#define FSPI_AHBRX_BUF7CR0 0x3C ++#define FSPI_AHBRXBUF0CR7_PREF_SHIFT 31 ++#define FSPI_AHBRXBUF0CR7_PREF_MASK (1 << FSPI_AHBRXBUF0CR7_PREF_SHIFT) ++ ++#define FSPI_AHBRX_BUF0CR1 0x40 ++#define FSPI_AHBRX_BUF1CR1 0x44 ++#define FSPI_AHBRX_BUF2CR1 0x48 ++#define FSPI_AHBRX_BUF3CR1 0x4C ++#define FSPI_AHBRX_BUF4CR1 0x50 ++#define FSPI_AHBRX_BUF5CR1 0x54 ++#define FSPI_AHBRX_BUF6CR1 0x58 ++#define FSPI_AHBRX_BUF7CR1 0x5C ++#define FSPI_BUFXCR1_MSID_SHIFT 0 ++#define FSPI_BUFXCR1_MSID_MASK (0xF << FSPI_BUFXCR1_MSID_SHIFT) ++#define FSPI_BUFXCR1_PRIO_SHIFT 8 ++#define FSPI_BUFXCR1_PRIO_MASK (0x7 << FSPI_BUFXCR1_PRIO_SHIFT) ++ ++#define FSPI_FLSHA1CR0 0x60 ++#define FSPI_FLSHA2CR0 0x64 ++#define FSPI_FLSHB1CR0 0x68 ++#define FSPI_FLSHB2CR0 0x6C ++#define FSPI_FLSHXCR0_SZ_SHIFT 10 ++#define FSPI_FLSHXCR0_SZ_MASK (0x3FFFFF << FSPI_FLSHXCR0_SZ_SHIFT) ++ ++#define FSPI_FLSHA1CR1 0x70 ++#define FSPI_FLSHA2CR1 0x74 ++#define FSPI_FLSHB1CR1 0x78 ++#define FSPI_FLSHB2CR1 0x7C ++#define FSPI_FLSHXCR1_CSINTR_SHIFT 16 ++#define FSPI_FLSHXCR1_CSINTR_MASK \ ++ (0xFFFF << FSPI_FLSHXCR1_CSINTR_SHIFT) ++#define FSPI_FLSHXCR1_CAS_SHIFT 11 ++#define FSPI_FLSHXCR1_CAS_MASK (0xF << FSPI_FLSHXCR1_CAS_SHIFT) ++#define FSPI_FLSHXCR1_WA_SHIFT 10 ++#define FSPI_FLSHXCR1_WA_MASK (1 << FSPI_FLSHXCR1_WA_SHIFT) ++#define FSPI_FLSHXCR1_TCSH_SHIFT 5 ++#define FSPI_FLSHXCR1_TCSH_MASK (0x1F << FSPI_FLSHXCR1_TCSH_SHIFT) ++#define FSPI_FLSHXCR1_TCSS_SHIFT 0 ++#define FSPI_FLSHXCR1_TCSS_MASK (0x1F << FSPI_FLSHXCR1_TCSS_SHIFT) ++ ++#define FSPI_FLSHA1CR2 0x80 ++#define FSPI_FLSHA2CR2 0x84 ++#define FSPI_FLSHB1CR2 0x88 ++#define FSPI_FLSHB2CR2 0x8C ++#define FSPI_FLSHXCR2_CLRINSP_SHIFT 24 ++#define FSPI_FLSHXCR2_CLRINSP_MASK (1 << FSPI_FLSHXCR2_CLRINSP_SHIFT) ++#define FSPI_FLSHXCR2_AWRWAIT_SHIFT 16 ++#define FSPI_FLSHXCR2_AWRWAIT_MASK (0xFF << FSPI_FLSHXCR2_AWRWAIT_SHIFT) ++#define FSPI_FLSHXCR2_AWRSEQN_SHIFT 13 ++#define FSPI_FLSHXCR2_AWRSEQN_MASK (0x7 << FSPI_FLSHXCR2_AWRSEQN_SHIFT) ++#define FSPI_FLSHXCR2_AWRSEQI_SHIFT 8 ++#define FSPI_FLSHXCR2_AWRSEQI_MASK (0xF << FSPI_FLSHXCR2_AWRSEQI_SHIFT) ++#define FSPI_FLSHXCR2_ARDSEQN_SHIFT 5 ++#define FSPI_FLSHXCR2_ARDSEQN_MASK (0x7 << FSPI_FLSHXCR2_ARDSEQN_SHIFT) ++#define FSPI_FLSHXCR2_ARDSEQI_SHIFT 0 ++#define FSPI_FLSHXCR2_ARDSEQI_MASK (0xF << FSPI_FLSHXCR2_ARDSEQI_SHIFT) ++ ++#define FSPI_IPCR0 0xA0 ++ ++#define FSPI_IPCR1 0xA4 ++#define FSPI_IPCR1_IPAREN_SHIFT 31 ++#define FSPI_IPCR1_IPAREN_MASK (1 << FSPI_IPCR1_IPAREN_SHIFT) ++#define FSPI_IPCR1_SEQNUM_SHIFT 24 ++#define FSPI_IPCR1_SEQNUM_MASK (0xF << FSPI_IPCR1_SEQNUM_SHIFT) ++#define FSPI_IPCR1_SEQID_SHIFT 16 ++#define FSPI_IPCR1_SEQID_MASK (0xF << FSPI_IPCR1_SEQID_SHIFT) ++#define FSPI_IPCR1_IDATSZ_SHIFT 0 ++#define FSPI_IPCR1_IDATSZ_MASK (0xFFFF << FSPI_IPCR1_IDATSZ_SHIFT) ++ ++#define FSPI_IPCMD 0xB0 ++#define FSPI_IPCMD_TRG_SHIFT 0 ++#define FSPI_IPCMD_TRG_MASK (1 << FSPI_IPCMD_TRG_SHIFT) ++ ++#define FSPI_DLPR 0xB4 ++ ++#define FSPI_IPRXFCR 0xB8 ++#define FSPI_IPRXFCR_CLR_SHIFT 0 ++#define FSPI_IPRXFCR_CLR_MASK (1 << FSPI_IPRXFCR_CLR_SHIFT) ++#define FSPI_IPRXFCR_DMA_EN_SHIFT 1 ++#define FSPI_IPRXFCR_DMA_EN_MASK (1 << FSPI_IPRXFCR_DMA_EN_SHIFT) ++#define FSPI_IPRXFCR_WMRK_SHIFT 2 ++#define FSPI_IPRXFCR_WMRK_MASK (0x1F << FSPI_IPRXFCR_WMRK_SHIFT) ++ ++#define FSPI_IPTXFCR 0xBC ++#define FSPI_IPTXFCR_CLR_SHIFT 0 ++#define FSPI_IPTXFCR_CLR_MASK (1 << FSPI_IPTXFCR_CLR_SHIFT) ++#define FSPI_IPTXFCR_DMA_EN_SHIFT 1 ++#define FSPI_IPTXFCR_DMA_EN_MASK (1 << FSPI_IPTXFCR_DMA_EN_SHIFT) ++#define FSPI_IPTXFCR_WMRK_SHIFT 2 ++#define FSPI_IPTXFCR_WMRK_MASK (0x1F << FSPI_IPTXFCR_WMRK_SHIFT) ++ ++#define FSPI_DLLACR 0xC0 ++#define FSPI_DLLACR_OVRDEN_SHIFT 8 ++#define FSPI_DLLACR_OVRDEN_MASK (1 << FSPI_DLLACR_OVRDEN_SHIFT) ++ ++#define FSPI_DLLBCR 0xC4 ++#define FSPI_DLLBCR_OVRDEN_SHIFT 8 ++#define FSPI_DLLBCR_OVRDEN_MASK (1 << FSPI_DLLBCR_OVRDEN_SHIFT) ++ ++#define FSPI_STS0 0xE0 ++#define FSPI_STS0_DLPHA_SHIFT 9 ++#define FSPI_STS0_DLPHA_MASK (0x1F << FSPI_STS0_DLPHA_SHIFT) ++#define FSPI_STS0_DLPHB_SHIFT 4 ++#define FSPI_STS0_DLPHB_MASK (0x1F << FSPI_STS0_DLPHB_SHIFT) ++#define FSPI_STS0_CMD_SRC_SHIFT 2 ++#define FSPI_STS0_CMD_SRC_MASK (3 << FSPI_STS0_CMD_SRC_SHIFT) ++#define FSPI_STS0_ARB_IDLE_SHIFT 1 ++#define FSPI_STS0_ARB_IDLE_MASK (1 << FSPI_STS0_ARB_IDLE_SHIFT) ++#define FSPI_STS0_SEQ_IDLE_SHIFT 0 ++#define FSPI_STS0_SEQ_IDLE_MASK (1 << FSPI_STS0_SEQ_IDLE_SHIFT) ++ ++#define FSPI_STS1 0xE4 ++#define FSPI_STS1_IP_ERRCD_SHIFT 24 ++#define FSPI_STS1_IP_ERRCD_MASK (0xF << FSPI_STS1_IP_ERRCD_SHIFT) ++#define FSPI_STS1_IP_ERRID_SHIFT 16 ++#define FSPI_STS1_IP_ERRID_MASK (0xF << FSPI_STS1_IP_ERRID_SHIFT) ++#define FSPI_STS1_AHB_ERRCD_SHIFT 8 ++#define FSPI_STS1_AHB_ERRCD_MASK (0xF << FSPI_STS1_AHB_ERRCD_SHIFT) ++#define FSPI_STS1_AHB_ERRID_SHIFT 0 ++#define FSPI_STS1_AHB_ERRID_MASK (0xF << FSPI_STS1_AHB_ERRID_SHIFT) ++ ++#define FSPI_AHBSPNST 0xEC ++#define FSPI_AHBSPNST_DATLFT_SHIFT 16 ++#define FSPI_AHBSPNST_DATLFT_MASK \ ++ (0xFFFF << FSPI_AHBSPNST_DATLFT_SHIFT) ++#define FSPI_AHBSPNST_BUFID_SHIFT 1 ++#define FSPI_AHBSPNST_BUFID_MASK (7 << FSPI_AHBSPNST_BUFID_SHIFT) ++#define FSPI_AHBSPNST_ACTIVE_SHIFT 0 ++#define FSPI_AHBSPNST_ACTIVE_MASK (1 << FSPI_AHBSPNST_ACTIVE_SHIFT) ++ ++#define FSPI_IPRXFSTS 0xF0 ++#define FSPI_IPRXFSTS_RDCNTR_SHIFT 16 ++#define FSPI_IPRXFSTS_RDCNTR_MASK \ ++ (0xFFFF << FSPI_IPRXFSTS_RDCNTR_SHIFT) ++#define FSPI_IPRXFSTS_FILL_SHIFT 0 ++#define FSPI_IPRXFSTS_FILL_MASK (0xFF << FSPI_IPRXFSTS_FILL_SHIFT) ++ ++#define FSPI_IPTXFSTS 0xF4 ++#define FSPI_IPTXFSTS_WRCNTR_SHIFT 16 ++#define FSPI_IPTXFSTS_WRCNTR_MASK \ ++ (0xFFFF << FSPI_IPTXFSTS_WRCNTR_SHIFT) ++#define FSPI_IPTXFSTS_FILL_SHIFT 0 ++#define FSPI_IPTXFSTS_FILL_MASK (0xFF << FSPI_IPTXFSTS_FILL_SHIFT) ++ ++#define FSPI_RFDR 0x100 ++#define FSPI_TFDR 0x180 ++ ++#define FSPI_LUT_BASE 0x200 ++ ++/* register map end */ ++ ++/* ++ * The definition of the LUT register shows below: ++ * ++ * --------------------------------------------------- ++ * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | ++ * --------------------------------------------------- ++ */ ++#define OPRND0_SHIFT 0 ++#define PAD0_SHIFT 8 ++#define INSTR0_SHIFT 10 ++#define OPRND1_SHIFT 16 ++ ++/* Instruction set for the LUT register. */ ++ ++#define LUT_STOP 0x00 ++#define LUT_CMD 0x01 ++#define LUT_ADDR 0x02 ++#define LUT_CADDR_SDR 0x03 ++#define LUT_MODE 0x04 ++#define LUT_MODE2 0x05 ++#define LUT_MODE4 0x06 ++#define LUT_MODE8 0x07 ++#define LUT_NXP_WRITE 0x08 ++#define LUT_NXP_READ 0x09 ++#define LUT_LEARN_SDR 0x0A ++#define LUT_DATSZ_SDR 0x0B ++#define LUT_DUMMY 0x0C ++#define LUT_DUMMY_RWDS_SDR 0x0D ++#define LUT_JMP_ON_CS 0x1F ++#define LUT_CMD_DDR 0x21 ++#define LUT_ADDR_DDR 0x22 ++#define LUT_CADDR_DDR 0x23 ++#define LUT_MODE_DDR 0x24 ++#define LUT_MODE2_DDR 0x25 ++#define LUT_MODE4_DDR 0x26 ++#define LUT_MODE8_DDR 0x27 ++#define LUT_WRITE_DDR 0x28 ++#define LUT_READ_DDR 0x29 ++#define LUT_LEARN_DDR 0x2A ++#define LUT_DATSZ_DDR 0x2B ++#define LUT_DUMMY_DDR 0x2C ++#define LUT_DUMMY_RWDS_DDR 0x2D ++ ++ ++/* ++ * The PAD definitions for LUT register. ++ * ++ * The pad stands for the lines number of IO[0:3]. ++ * For example, the Quad read need four IO lines, so you should ++ * set LUT_PAD4 which means we use four IO lines. ++ */ ++#define LUT_PAD1 0 ++#define LUT_PAD2 1 ++#define LUT_PAD4 2 ++#define LUT_PAD8 3 ++ ++/* Oprands for the LUT register. */ ++#define ADDR24BIT 0x18 ++#define ADDR32BIT 0x20 ++ ++/* Macros for constructing the LUT register. */ ++#define LUT0(ins, pad, opr) \ ++ (((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \ ++ ((LUT_##ins) << INSTR0_SHIFT)) ++ ++#define LUT1(ins, pad, opr) (LUT0(ins, pad, opr) << OPRND1_SHIFT) ++ ++/* other macros for LUT register. */ ++#define FSPI_LUT(x) (FSPI_LUT_BASE + (x) * 4) ++#define FSPI_LUT_NUM 128 ++ ++/* SEQID -- we can have 32 seqids at most. */ ++#define SEQID_READ 0 ++#define SEQID_WREN 1 ++#define SEQID_WRDI 2 ++#define SEQID_RDSR 3 ++#define SEQID_SE 4 ++#define SEQID_CHIP_ERASE 5 ++#define SEQID_PP 6 ++#define SEQID_RDID 7 ++#define SEQID_WRSR 8 ++#define SEQID_RDCR 9 ++#define SEQID_EN4B 10 ++#define SEQID_BRWR 11 ++#define SEQID_RD_EVCR 12 ++#define SEQID_WD_EVCR 13 ++#define SEQID_RDFSR 14 ++ ++#define FSPI_MIN_IOMAP SZ_4M ++ ++#define FSPI_RX_MAX_IPBUF_SIZE 0x200 /* 64 * 64bits */ ++#define FSPI_TX_MAX_IPBUF_SIZE 0x400 /* 128 * 64bits */ ++#define FSPI_RX_MAX_AHBBUF_SIZE 0x800 /* 256 * 64bits */ ++#define FSPI_TX_MAX_AHBBUF_SIZE 0x40 /* 8 * 64bits */ ++ ++#define TX_IPBUF_SIZE FSPI_TX_MAX_IPBUF_SIZE ++#define RX_IPBUF_SIZE FSPI_RX_MAX_IPBUF_SIZE ++#define RX_AHBBUF_SIZE FSPI_RX_MAX_AHBBUF_SIZE ++#define TX_AHBBUF_SIZE FSPI_TX_MAX_AHBBUF_SIZE ++ ++#define FSPI_SINGLE_MODE 1 ++#define FSPI_OCTAL_MODE 8 ++ ++#define FSPINOR_OP_READ_1_1_8_4B 0x7c ++ ++enum nxp_fspi_devtype { ++ NXP_FSPI_LX2160A, ++}; ++ ++struct nxp_fspi_devtype_data { ++ enum nxp_fspi_devtype devtype; ++ int rxfifo; ++ int txfifo; ++ int ahb_buf_size; ++ int driver_data; ++}; ++ ++static struct nxp_fspi_devtype_data lx2160a_data = { ++ .devtype = NXP_FSPI_LX2160A, ++ .rxfifo = RX_IPBUF_SIZE, ++ .txfifo = TX_IPBUF_SIZE, ++ .ahb_buf_size = RX_AHBBUF_SIZE, ++ .driver_data = 0, ++}; ++ ++#define NXP_FSPI_MAX_CHIP 4 ++struct nxp_fspi { ++ struct mtd_info mtd[NXP_FSPI_MAX_CHIP]; ++ struct spi_nor nor[NXP_FSPI_MAX_CHIP]; ++ void __iomem *iobase; ++ void __iomem *ahb_addr; ++ u32 memmap_phy; ++ u32 memmap_offs; ++ u32 memmap_len; ++ struct clk *clk, *clk_en; ++ struct device *dev; ++ struct completion c; ++ struct nxp_fspi_devtype_data *devtype_data; ++ u32 nor_size; ++ u32 nor_num; ++ u32 clk_rate; ++ u32 spi_rx_bus_width; ++ u32 spi_tx_bus_width; ++ unsigned int chip_base_addr; /* We may support two chips. */ ++ bool has_second_chip; ++ struct mutex lock; ++ struct pm_qos_request pm_qos_req; ++}; ++ ++static inline void nxp_fspi_unlock_lut(struct nxp_fspi *fspi) ++{ ++ writel(FSPI_LUTKEY_VALUE, fspi->iobase + FSPI_LUTKEY); ++ writel(FSPI_LCKER_UNLOCK, fspi->iobase + FSPI_LCKCR); ++} ++ ++static inline void nxp_fspi_lock_lut(struct nxp_fspi *fspi) ++{ ++ writel(FSPI_LUTKEY_VALUE, fspi->iobase + FSPI_LUTKEY); ++ writel(FSPI_LCKER_LOCK, fspi->iobase + FSPI_LCKCR); ++} ++ ++static irqreturn_t nxp_fspi_irq_handler(int irq, void *dev_id) ++{ ++ struct nxp_fspi *fspi = dev_id; ++ u32 reg; ++ ++ reg = readl(fspi->iobase + FSPI_INTR); ++ writel(FSPI_INTR_IPCMDDONE_MASK, fspi->iobase + FSPI_INTR); ++ if (reg & FSPI_INTR_IPCMDDONE_MASK) ++ complete(&fspi->c); ++ ++ return IRQ_HANDLED; ++} ++ ++static void nxp_fspi_init_lut(struct nxp_fspi *fspi) ++{ ++ void __iomem *base = fspi->iobase; ++ struct spi_nor *nor = &fspi->nor[0]; ++ u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; ++ u32 lut_base; ++ u8 op, dm; ++ int i; ++ ++ nxp_fspi_unlock_lut(fspi); ++ ++ /* Clear all the LUT table */ ++ for (i = 0; i < FSPI_LUT_NUM; i++) ++ writel(0, base + FSPI_LUT_BASE + i * 4); ++ ++ /* Read */ ++ lut_base = SEQID_READ * 4; ++ op = nor->read_opcode; ++ dm = nor->read_dummy; ++ ++ if (fspi->spi_rx_bus_width == FSPI_OCTAL_MODE) { ++ dm = 8; ++ op = FSPINOR_OP_READ_1_1_8_4B; ++ writel(LUT0(CMD, PAD1, op) | LUT1(ADDR, PAD1, addrlen), ++ base + FSPI_LUT(lut_base)); ++ writel(LUT0(DUMMY, PAD8, dm) | LUT1(NXP_READ, PAD8, 0), ++ base + FSPI_LUT(lut_base + 1)); ++ } else { ++ if ((op == SPINOR_OP_READ_FAST_4B) || ++ (op == SPINOR_OP_READ_FAST) || ++ (op == SPINOR_OP_READ) || ++ (op == SPINOR_OP_READ_4B)) { ++ dm = 8; ++ writel(LUT0(CMD, PAD1, op) | LUT1(ADDR, PAD1, addrlen), ++ base + FSPI_LUT(lut_base)); ++ writel(LUT0(DUMMY, PAD1, dm) | LUT1(NXP_READ, PAD1, 0), ++ base + FSPI_LUT(lut_base + 1)); ++ } else if (nor->read_proto == SNOR_PROTO_1_4_4) { ++ dev_dbg(nor->dev, "Unsupported opcode : 0x%.2x\n", op); ++ /* TODO Add support for other Read ops. */ ++ } else { ++ dev_dbg(nor->dev, "Unsupported opcode : 0x%.2x\n", op); ++ } ++ } ++ ++ /* Write enable */ ++ lut_base = SEQID_WREN * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + FSPI_LUT(lut_base)); ++ ++ /* Page Program */ ++ lut_base = SEQID_PP * 4; ++ writel(LUT0(CMD, PAD1, nor->program_opcode) | LUT1(ADDR, PAD1, addrlen), ++ base + FSPI_LUT(lut_base)); ++ writel(LUT0(NXP_WRITE, PAD1, 0), base + FSPI_LUT(lut_base + 1)); ++ ++ /* Read Status */ ++ lut_base = SEQID_RDSR * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(NXP_READ, PAD1, 0x1), ++ base + FSPI_LUT(lut_base)); ++ ++ /* Erase a sector */ ++ lut_base = SEQID_SE * 4; ++ writel(LUT0(CMD, PAD1, nor->erase_opcode) | LUT1(ADDR, PAD1, addrlen), ++ base + FSPI_LUT(lut_base)); ++ ++ /* Erase the whole chip */ ++ lut_base = SEQID_CHIP_ERASE * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE), ++ base + FSPI_LUT(lut_base)); ++ ++ /* READ ID */ ++ lut_base = SEQID_RDID * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(NXP_READ, PAD1, 0x8), ++ base + FSPI_LUT(lut_base)); ++ ++ /* Write Register */ ++ lut_base = SEQID_WRSR * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(NXP_WRITE, PAD1, 0x2), ++ base + FSPI_LUT(lut_base)); ++ ++ /* Read Configuration Register */ ++ lut_base = SEQID_RDCR * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(NXP_READ, PAD1, 0x1), ++ base + FSPI_LUT(lut_base)); ++ ++ /* Write disable */ ++ lut_base = SEQID_WRDI * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + FSPI_LUT(lut_base)); ++ ++ /* Enter 4 Byte Mode (Micron) */ ++ lut_base = SEQID_EN4B * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + FSPI_LUT(lut_base)); ++ ++ /* Enter 4 Byte Mode (Spansion) */ ++ lut_base = SEQID_BRWR * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + FSPI_LUT(lut_base)); ++ ++ /* Read EVCR register */ ++ lut_base = SEQID_RD_EVCR * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_RD_EVCR), ++ base + FSPI_LUT(lut_base)); ++ ++ /* Write EVCR register */ ++ lut_base = SEQID_WD_EVCR * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_WD_EVCR), ++ base + FSPI_LUT(lut_base)); ++ ++ /* Read Flag Status */ ++ lut_base = SEQID_RDFSR * 4; ++ writel(LUT0(CMD, PAD1, SPINOR_OP_RDFSR) | LUT1(NXP_READ, PAD1, 0x1), ++ base + FSPI_LUT(lut_base)); ++ ++ nxp_fspi_lock_lut(fspi); ++} ++ ++/* Get the SEQID for the command */ ++static int nxp_fspi_get_seqid(struct nxp_fspi *fspi, u8 cmd) ++{ ++ ++ switch (cmd) { ++ case SPINOR_OP_READ_1_1_4_4B: ++ case SPINOR_OP_READ_1_1_4: ++ case SPINOR_OP_READ: ++ case SPINOR_OP_READ_4B: ++ case SPINOR_OP_READ_FAST: ++ case SPINOR_OP_READ_FAST_4B: ++ return SEQID_READ; ++ case SPINOR_OP_WREN: ++ return SEQID_WREN; ++ case SPINOR_OP_WRDI: ++ return SEQID_WRDI; ++ case SPINOR_OP_RDSR: ++ return SEQID_RDSR; ++ case SPINOR_OP_RDFSR: ++ return SEQID_RDFSR; ++ case SPINOR_OP_BE_4K: ++ case SPINOR_OP_SE: ++ case SPINOR_OP_SE_4B: ++ case SPINOR_OP_BE_4K_4B: ++ return SEQID_SE; ++ case SPINOR_OP_CHIP_ERASE: ++ return SEQID_CHIP_ERASE; ++ case SPINOR_OP_PP: ++ case SPINOR_OP_PP_4B: ++ return SEQID_PP; ++ case SPINOR_OP_RDID: ++ return SEQID_RDID; ++ case SPINOR_OP_WRSR: ++ return SEQID_WRSR; ++ case SPINOR_OP_RDCR: ++ return SEQID_RDCR; ++ case SPINOR_OP_EN4B: ++ return SEQID_EN4B; ++ case SPINOR_OP_BRWR: ++ return SEQID_BRWR; ++ case SPINOR_OP_RD_EVCR: ++ return SEQID_RD_EVCR; ++ case SPINOR_OP_WD_EVCR: ++ return SEQID_WD_EVCR; ++ default: ++ dev_err(fspi->dev, "Unsupported cmd 0x%.2x\n", cmd); ++ break; + } ++ return -EINVAL; ++} ++ ++static int ++nxp_fspi_runcmd(struct nxp_fspi *fspi, u8 cmd, unsigned int addr, int len) ++{ ++ void __iomem *base = fspi->iobase; ++ int seqid; ++ int seqnum = 0; ++ u32 reg; ++ int err; ++ int iprxfcr = 0; ++ ++ iprxfcr = readl(fspi->iobase + FSPI_IPRXFCR); ++ /* invalid RXFIFO first */ ++ iprxfcr &= ~FSPI_IPRXFCR_DMA_EN_MASK; ++ iprxfcr = iprxfcr | FSPI_IPRXFCR_CLR_MASK; ++ writel(iprxfcr, fspi->iobase + FSPI_IPRXFCR); ++ ++ init_completion(&fspi->c); ++ dev_dbg(fspi->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n", ++ fspi->chip_base_addr, addr, len, cmd); ++ ++ /* write address */ ++ writel(fspi->chip_base_addr + addr, base + FSPI_IPCR0); ++ ++ seqid = nxp_fspi_get_seqid(fspi, cmd); + -+ if (!free_blocks) { -+ /* Let's commit before we use up the metadata reserve. */ -+ r = commit(pool); -+ if (r) -+ return r; ++ writel((seqnum << FSPI_IPCR1_SEQNUM_SHIFT) | ++ (seqid << FSPI_IPCR1_SEQID_SHIFT) | len, ++ base + FSPI_IPCR1); ++ ++ /* wait till controller is idle */ ++ do { ++ reg = readl(base + FSPI_STS0); ++ if ((reg & FSPI_STS0_ARB_IDLE_MASK) && ++ (reg & FSPI_STS0_SEQ_IDLE_MASK)) ++ break; ++ udelay(1); ++ dev_dbg(fspi->dev, "The controller is busy, 0x%x\n", reg); ++ } while (1); ++ ++ /* trigger the LUT now */ ++ writel(1, base + FSPI_IPCMD); ++ ++ /* Wait for the interrupt. */ ++ if (!wait_for_completion_timeout(&fspi->c, msecs_to_jiffies(1000))) { ++ dev_err(fspi->dev, ++ "cmd 0x%.2x timeout, addr@%.8x, Status0:0x%.8x, Status1:0x%.8x\n", ++ cmd, addr, readl(base + FSPI_STS0), ++ readl(base + FSPI_STS1)); ++ err = -ETIMEDOUT; ++ } else { ++ err = 0; ++ dev_dbg(fspi->dev, "FSPI Intr done,INTR:<0x%.8x>\n", ++ readl(base + FSPI_INTR)); + } + - return 0; - } - ---- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c -+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c -@@ -616,6 +616,13 @@ static int qed_mcp_cmd_and_union(struct - return -EBUSY; - } - -+ if (p_hwfn->mcp_info->b_block_cmd) { -+ DP_NOTICE(p_hwfn, -+ "The MFW is not responsive. Avoid sending mailbox command 0x%08x [param 0x%08x].\n", -+ p_mb_params->cmd, p_mb_params->param); ++ return err; ++} ++ ++/* Read out the data from the FSPI_RBDR buffer registers. */ ++static void nxp_fspi_read_data(struct nxp_fspi *fspi, int len, u8 *rxbuf) ++{ ++ int i = 0, j = 0, tmp_size = 0; ++ int size; ++ u32 tmp = 0; ++ ++ while (len > 0) { ++ ++ size = len / 8; ++ ++ for (i = 0; i < size; ++i) { ++ /* Wait for RXFIFO available*/ ++ while (!(readl(fspi->iobase + FSPI_INTR) ++ & FSPI_INTR_IPRXWA_MASK)) ++ ; ++ ++ j = 0; ++ tmp_size = 8; ++ while (tmp_size > 0) { ++ tmp = 0; ++ tmp = readl(fspi->iobase + FSPI_RFDR + j * 4); ++ memcpy(rxbuf, &tmp, 4); ++ tmp_size -= 4; ++ j++; ++ rxbuf += 4; ++ } ++ ++ /* move the FIFO pointer */ ++ writel(FSPI_INTR_IPRXWA_MASK, ++ fspi->iobase + FSPI_INTR); ++ len -= 8; ++ } ++ ++ size = len % 8; ++ ++ j = 0; ++ if (size) { ++ /* Wait for RXFIFO available*/ ++ while (!(readl(fspi->iobase + FSPI_INTR) ++ & FSPI_INTR_IPRXWA_MASK)) ++ ; ++ ++ while (len > 0) { ++ tmp = 0; ++ size = (len < 4) ? len : 4; ++ tmp = readl(fspi->iobase + FSPI_RFDR + j * 4); ++ memcpy(rxbuf, &tmp, size); ++ len -= size; ++ j++; ++ rxbuf += size; ++ } ++ } ++ ++ /* invalid the RXFIFO */ ++ writel(FSPI_IPRXFCR_CLR_MASK, ++ fspi->iobase + FSPI_IPRXFCR); ++ ++ writel(FSPI_INTR_IPRXWA_MASK, ++ fspi->iobase + FSPI_INTR); ++ } ++} ++ ++static inline void nxp_fspi_invalid(struct nxp_fspi *fspi) ++{ ++ u32 reg; ++ ++ reg = readl(fspi->iobase + FSPI_MCR0); ++ writel(reg | FSPI_MCR0_SWRST_MASK, fspi->iobase + FSPI_MCR0); ++ ++ /* ++ * The minimum delay : 1 AHB + 2 SFCK clocks. ++ * Delay 1 us is enough. ++ */ ++ while (readl(fspi->iobase + FSPI_MCR0) & FSPI_MCR0_SWRST_MASK) ++ ; ++} ++ ++static ssize_t nxp_fspi_nor_write(struct nxp_fspi *fspi, ++ struct spi_nor *nor, u8 opcode, ++ unsigned int to, u32 *txbuf, ++ unsigned int count) ++{ ++ int ret, i, j; ++ int size, tmp_size; ++ u32 data = 0; ++ ++ dev_dbg(fspi->dev, "nor write to 0x%.8x:0x%.8x, len : %d\n", ++ fspi->chip_base_addr, to, count); ++ ++ /* clear the TX FIFO. */ ++ writel(FSPI_IPTXFCR_CLR_MASK, fspi->iobase + FSPI_IPTXFCR); ++ ++ size = count / 8; ++ for (i = 0; i < size; i++) { ++ /* Wait for TXFIFO empty*/ ++ while (!(readl(fspi->iobase + FSPI_INTR) ++ & FSPI_INTR_IPTXWE_MASK)) ++ ; ++ j = 0; ++ tmp_size = 8; ++ while (tmp_size > 0) { ++ data = 0; ++ memcpy(&data, txbuf, 4); ++ writel(data, fspi->iobase + FSPI_TFDR + j * 4); ++ tmp_size -= 4; ++ j++; ++ txbuf += 1; ++ } ++ ++ writel(FSPI_INTR_IPTXWE_MASK, fspi->iobase + FSPI_INTR); ++ } ++ ++ size = count % 8; ++ if (size) { ++ /* Wait for TXFIFO empty*/ ++ while (!(readl(fspi->iobase + FSPI_INTR) ++ & FSPI_INTR_IPTXWE_MASK)) ++ ; ++ ++ j = 0; ++ tmp_size = 0; ++ while (size > 0) { ++ data = 0; ++ tmp_size = (size < 4) ? size : 4; ++ memcpy(&data, txbuf, tmp_size); ++ writel(data, fspi->iobase + FSPI_TFDR + j * 4); ++ size -= tmp_size; ++ j++; ++ txbuf += 1; ++ } ++ ++ writel(FSPI_INTR_IPTXWE_MASK, fspi->iobase + FSPI_INTR); ++ } ++ ++ /* Trigger it */ ++ ret = nxp_fspi_runcmd(fspi, opcode, to, count); ++ ++ if (ret == 0) ++ return count; ++ ++ return ret; ++} ++ ++static void nxp_fspi_set_map_addr(struct nxp_fspi *fspi) ++{ ++ int nor_size = fspi->nor_size >> 10; ++ void __iomem *base = fspi->iobase; ++ ++ /* ++ * Supporting same flash device as slaves on different chip-select. ++ * As SAMEDEVICEEN bit set, by default, in mcr2 reg then need not to ++ * configure FLSHA2CRx/FLSHB1CRx/FLSHB2CRx register as setting for ++ * these would be ignored. ++ * Need to Reset SAMEDEVICEEN bit in mcr2 reg, when require to add ++ * support for different flashes. ++ */ ++ writel(nor_size, base + FSPI_FLSHA1CR0); ++ writel(0, base + FSPI_FLSHA2CR0); ++ writel(0, base + FSPI_FLSHB1CR0); ++ writel(0, base + FSPI_FLSHB2CR0); ++} ++ ++static void nxp_fspi_init_ahb_read(struct nxp_fspi *fspi) ++{ ++ void __iomem *base = fspi->iobase; ++ struct spi_nor *nor = &fspi->nor[0]; ++ int i = 0; ++ int seqid; ++ ++ /* AHB configuration for access buffer 0~7. */ ++ for (i = 0; i < 7; i++) ++ writel(0, base + FSPI_AHBRX_BUF0CR0 + 4 * i); ++ ++ /* ++ * Set ADATSZ with the maximum AHB buffer size to improve the read ++ * performance. ++ */ ++ writel((fspi->devtype_data->ahb_buf_size / 8 | ++ FSPI_AHBRXBUF0CR7_PREF_MASK), base + FSPI_AHBRX_BUF7CR0); ++ ++ /* prefetch and no start address alignment limitation */ ++ writel(FSPI_AHBCR_PREF_EN_MASK | FSPI_AHBCR_RDADDROPT_MASK, ++ base + FSPI_AHBCR); ++ ++ ++ /* Set the default lut sequence for AHB Read. */ ++ seqid = nxp_fspi_get_seqid(fspi, nor->read_opcode); ++ writel(seqid, base + FSPI_FLSHA1CR2); ++} ++ ++/* This function was used to prepare and enable FSPI clock */ ++static int nxp_fspi_clk_prep_enable(struct nxp_fspi *fspi) ++{ ++ int ret; ++ ++ ret = clk_prepare_enable(fspi->clk_en); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(fspi->clk); ++ if (ret) { ++ clk_disable_unprepare(fspi->clk_en); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++/* This function was used to disable and unprepare FSPI clock */ ++static void nxp_fspi_clk_disable_unprep(struct nxp_fspi *fspi) ++{ ++ clk_disable_unprepare(fspi->clk); ++ clk_disable_unprepare(fspi->clk_en); ++} ++ ++/* We use this function to do some basic init for spi_nor_scan(). */ ++static int nxp_fspi_nor_setup(struct nxp_fspi *fspi) ++{ ++ void __iomem *base = fspi->iobase; ++ u32 reg; ++ ++ /* Reset the module */ ++ writel(FSPI_MCR0_SWRST_MASK, base + FSPI_MCR0); ++ do { ++ udelay(1); ++ } while (0x1 & readl(base + FSPI_MCR0)); ++ ++ /* Disable the module */ ++ writel(FSPI_MCR0_MDIS_MASK, base + FSPI_MCR0); ++ ++ /* Reset the DLL register to default value */ ++ writel(FSPI_DLLACR_OVRDEN_MASK, base + FSPI_DLLACR); ++ writel(FSPI_DLLBCR_OVRDEN_MASK, base + FSPI_DLLBCR); ++ ++ /* enable module */ ++ writel(FSPI_MCR0_AHB_TIMEOUT_MASK | FSPI_MCR0_IP_TIMEOUT_MASK, ++ base + FSPI_MCR0); ++ ++ /* Read the register value */ ++ reg = readl(base + FSPI_MCR0); ++ ++ /* Init the LUT table. */ ++ nxp_fspi_init_lut(fspi); ++ ++ /* enable the interrupt */ ++ writel(FSPI_INTEN_IPCMDDONE_MASK, fspi->iobase + FSPI_INTEN); ++ return 0; ++} ++ ++static int nxp_fspi_nor_setup_last(struct nxp_fspi *fspi) ++{ ++ unsigned long rate = fspi->clk_rate; ++ int ret; ++ ++ /* disable and unprepare clock to avoid glitch pass to controller */ ++ nxp_fspi_clk_disable_unprep(fspi); ++ ++ ret = clk_set_rate(fspi->clk, rate); ++ if (ret) ++ return ret; ++ ++ ret = nxp_fspi_clk_prep_enable(fspi); ++ if (ret) ++ return ret; ++ ++ /* Init the LUT table again. */ ++ nxp_fspi_init_lut(fspi); ++ ++ /* Init for AHB read */ ++ nxp_fspi_init_ahb_read(fspi); ++ ++ return 0; ++} ++ ++static void nxp_fspi_set_base_addr(struct nxp_fspi *fspi, ++ struct spi_nor *nor) ++{ ++ fspi->chip_base_addr = fspi->nor_size * (nor - fspi->nor); ++} ++ ++static int nxp_fspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, ++ int len) ++{ ++ int ret; ++ struct nxp_fspi *fspi = nor->priv; ++ ++ ret = nxp_fspi_runcmd(fspi, opcode, 0, len); ++ if (ret) ++ return ret; ++ ++ nxp_fspi_read_data(fspi, len, buf); ++ return 0; ++} ++ ++static int nxp_fspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, ++ int len) ++{ ++ struct nxp_fspi *fspi = nor->priv; ++ int ret; ++ ++ if (!buf) { ++ ret = nxp_fspi_runcmd(fspi, opcode, 0, 1); ++ if (ret) ++ return ret; ++ ++ if (opcode == SPINOR_OP_CHIP_ERASE) ++ nxp_fspi_invalid(fspi); ++ ++ } else if (len > 0) { ++ ret = nxp_fspi_nor_write(fspi, nor, opcode, 0, ++ (u32 *)buf, len); ++ } else { ++ dev_err(fspi->dev, "invalid cmd %d\n", opcode); ++ ret = -EINVAL; ++ } ++ ++ return ret; ++} ++ ++static ssize_t nxp_fspi_write(struct spi_nor *nor, loff_t to, ++ size_t len, const u_char *buf) ++{ ++ struct nxp_fspi *fspi = nor->priv; ++ ssize_t tx_size = 0, act_wrt = 0, ret = 0; ++ ++ while (len > 0) { ++ tx_size = (len > TX_IPBUF_SIZE) ? TX_IPBUF_SIZE : len; ++ ++ act_wrt = nxp_fspi_nor_write(fspi, nor, nor->program_opcode, to, ++ (u32 *)buf, tx_size); ++ len -= tx_size; ++ to += tx_size; ++ ret += act_wrt; ++ } ++ ++ /* invalid the data in the AHB buffer. */ ++ nxp_fspi_invalid(fspi); ++ return ret; ++} ++ ++static ssize_t nxp_fspi_read(struct spi_nor *nor, loff_t from, ++ size_t len, u_char *buf) ++{ ++ struct nxp_fspi *fspi = nor->priv; ++ ++ /* if necessary, ioremap buffer before AHB read, */ ++ if (!fspi->ahb_addr) { ++ fspi->memmap_offs = fspi->chip_base_addr + from; ++ fspi->memmap_len = len > FSPI_MIN_IOMAP ? ++ len : FSPI_MIN_IOMAP; ++ ++ fspi->ahb_addr = ioremap_nocache( ++ fspi->memmap_phy + fspi->memmap_offs, ++ fspi->memmap_len); ++ if (!fspi->ahb_addr) { ++ dev_err(fspi->dev, "ioremap failed\n"); ++ return -ENOMEM; ++ } ++ /* ioremap if the data requested is out of range */ ++ } else if (fspi->chip_base_addr + from < fspi->memmap_offs ++ || fspi->chip_base_addr + from + len > ++ fspi->memmap_offs + fspi->memmap_len) { ++ iounmap(fspi->ahb_addr); ++ ++ fspi->memmap_offs = fspi->chip_base_addr + from; ++ fspi->memmap_len = len > FSPI_MIN_IOMAP ? ++ len : FSPI_MIN_IOMAP; ++ fspi->ahb_addr = ioremap_nocache( ++ fspi->memmap_phy + fspi->memmap_offs, ++ fspi->memmap_len); ++ if (!fspi->ahb_addr) { ++ dev_err(fspi->dev, "ioremap failed\n"); ++ return -ENOMEM; ++ } ++ } ++ ++ dev_dbg(fspi->dev, "cmd [%x],read from %p, len:%zd\n", ++ nor->read_opcode, fspi->ahb_addr + fspi->chip_base_addr ++ + from - fspi->memmap_offs, len); ++ ++ /* Read out the data directly from the AHB buffer.*/ ++ memcpy_toio(buf, fspi->ahb_addr + fspi->chip_base_addr ++ + from - fspi->memmap_offs, len); ++ ++ return len; ++} ++ ++static int nxp_fspi_erase(struct spi_nor *nor, loff_t offs) ++{ ++ struct nxp_fspi *fspi = nor->priv; ++ int ret; ++ ++ dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n", ++ nor->mtd.erasesize / 1024, fspi->chip_base_addr, (u32)offs); ++ ++ ret = nxp_fspi_runcmd(fspi, nor->erase_opcode, offs, 0); ++ if (ret) ++ return ret; ++ ++ nxp_fspi_invalid(fspi); ++ return 0; ++} ++ ++static int nxp_fspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) ++{ ++ struct nxp_fspi *fspi = nor->priv; ++ int ret; ++ ++ mutex_lock(&fspi->lock); ++ ++ ret = nxp_fspi_clk_prep_enable(fspi); ++ if (ret) ++ goto err_mutex; ++ ++ nxp_fspi_set_base_addr(fspi, nor); ++ return 0; ++ ++err_mutex: ++ mutex_unlock(&fspi->lock); ++ return ret; ++} ++ ++static void nxp_fspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) ++{ ++ struct nxp_fspi *fspi = nor->priv; ++ ++ nxp_fspi_clk_disable_unprep(fspi); ++ mutex_unlock(&fspi->lock); ++} ++ ++static const struct of_device_id nxp_fspi_dt_ids[] = { ++ { .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids); ++ ++static int nxp_fspi_probe(struct platform_device *pdev) ++{ ++ struct spi_nor_hwcaps hwcaps = { ++ .mask = SPINOR_OP_READ_FAST_4B | ++ SPINOR_OP_READ_4B | ++ SNOR_HWCAPS_PP ++ }; ++ struct device_node *np = pdev->dev.of_node; ++ struct device *dev = &pdev->dev; ++ struct nxp_fspi *fspi; ++ struct resource *res; ++ struct spi_nor *nor; ++ struct mtd_info *mtd; ++ int ret, i = 0; ++ int find_node = 0; ++ ++ const struct of_device_id *of_id = ++ of_match_device(nxp_fspi_dt_ids, &pdev->dev); ++ ++ fspi = devm_kzalloc(dev, sizeof(*fspi), GFP_KERNEL); ++ if (!fspi) ++ return -ENOMEM; ++ ++ fspi->nor_num = of_get_child_count(dev->of_node); ++ if (!fspi->nor_num || fspi->nor_num > 4) ++ return -ENODEV; ++ ++ fspi->dev = dev; ++ fspi->devtype_data = (struct nxp_fspi_devtype_data *)of_id->data; ++ platform_set_drvdata(pdev, fspi); ++ ++ /* find the resources */ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "FSPI"); ++ if (!res) { ++ dev_err(dev, "FSPI get resource IORESOURCE_MEM failed\n"); ++ return -ENODEV; ++ } ++ ++ fspi->iobase = devm_ioremap_resource(dev, res); ++ if (IS_ERR(fspi->iobase)) ++ return PTR_ERR(fspi->iobase); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "FSPI-memory"); ++ if (!res) { ++ dev_err(dev, ++ "FSPI-memory get resource IORESOURCE_MEM failed\n"); ++ return -ENODEV; ++ } ++ ++ if (!devm_request_mem_region(dev, res->start, resource_size(res), ++ res->name)) { ++ dev_err(dev, "can't request region for resource %pR\n", res); + return -EBUSY; + } + - if (p_mb_params->data_src_size > union_data_size || - p_mb_params->data_dst_size > union_data_size) { - DP_ERR(p_hwfn, ---- a/drivers/net/phy/xilinx_gmii2rgmii.c -+++ b/drivers/net/phy/xilinx_gmii2rgmii.c -@@ -92,6 +92,11 @@ static int xgmiitorgmii_probe(struct mdi - return -EPROBE_DEFER; - } - -+ if (!priv->phy_dev->drv) { -+ dev_info(dev, "Attached phy not ready\n"); -+ return -EPROBE_DEFER; -+ } -+ - priv->addr = mdiodev->addr; - priv->phy_drv = priv->phy_dev->drv; - memcpy(&priv->conv_phy_drv, priv->phy_dev->drv, ---- a/drivers/spi/spi-tegra20-slink.c -+++ b/drivers/spi/spi-tegra20-slink.c -@@ -1081,6 +1081,24 @@ static int tegra_slink_probe(struct plat - goto exit_free_master; - } - -+ /* disabled clock may cause interrupt storm upon request */ -+ tspi->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(tspi->clk)) { -+ ret = PTR_ERR(tspi->clk); -+ dev_err(&pdev->dev, "Can not get clock %d\n", ret); -+ goto exit_free_master; -+ } -+ ret = clk_prepare(tspi->clk); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "Clock prepare failed %d\n", ret); -+ goto exit_free_master; ++ fspi->memmap_phy = res->start; ++ ++ /* find the clocks */ ++ fspi->clk_en = devm_clk_get(dev, "fspi_en"); ++ if (IS_ERR(fspi->clk_en)) ++ return PTR_ERR(fspi->clk_en); ++ ++ fspi->clk = devm_clk_get(dev, "fspi"); ++ if (IS_ERR(fspi->clk)) ++ return PTR_ERR(fspi->clk); ++ ++ ret = nxp_fspi_clk_prep_enable(fspi); ++ if (ret) { ++ dev_err(dev, "can not enable the clock\n"); ++ goto clk_failed; + } -+ ret = clk_enable(tspi->clk); ++ ++ /* find the irq */ ++ ret = platform_get_irq(pdev, 0); + if (ret < 0) { -+ dev_err(&pdev->dev, "Clock enable failed %d\n", ret); -+ goto exit_free_master; -+ } -+ - spi_irq = platform_get_irq(pdev, 0); - tspi->irq = spi_irq; - ret = request_threaded_irq(tspi->irq, tegra_slink_isr, ---- a/drivers/staging/android/ashmem.c -+++ b/drivers/staging/android/ashmem.c -@@ -380,6 +380,12 @@ static int ashmem_mmap(struct file *file - goto out; - } - -+ /* requested mapping size larger than object size */ -+ if (vma->vm_end - vma->vm_start > PAGE_ALIGN(asma->size)) { -+ ret = -EINVAL; -+ goto out; -+ } -+ - /* requested protection bits must match our allowed protection mask */ - if (unlikely((vma->vm_flags & ~calc_vm_prot_bits(asma->prot_mask, 0)) & - calc_vm_prot_bits(PROT_MASK, 0))) { ---- a/drivers/tty/serial/imx.c -+++ b/drivers/tty/serial/imx.c -@@ -2221,6 +2221,14 @@ static int serial_imx_probe(struct platf - ret); - return ret; - } -+ -+ ret = devm_request_irq(&pdev->dev, rtsirq, imx_rtsint, 0, -+ dev_name(&pdev->dev), sport); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to request rts irq: %d\n", -+ ret); -+ return ret; ++ dev_err(dev, "failed to get the irq: %d\n", ret); ++ goto irq_failed; ++ } ++ ++ ret = devm_request_irq(dev, ret, ++ nxp_fspi_irq_handler, 0, pdev->name, fspi); ++ if (ret) { ++ dev_err(dev, "failed to request irq: %d\n", ret); ++ goto irq_failed; ++ } ++ ++ ret = nxp_fspi_nor_setup(fspi); ++ if (ret) ++ goto irq_failed; ++ ++ if (of_get_property(np, "nxp,fspi-has-second-chip", NULL)) ++ fspi->has_second_chip = true; ++ ++ mutex_init(&fspi->lock); ++ ++ find_node = 0; ++ /* iterate the subnodes. */ ++ for_each_available_child_of_node(dev->of_node, np) { ++ /* skip the holes */ ++ if (!fspi->has_second_chip) ++ i *= 2; ++ ++ nor = &fspi->nor[i]; ++ mtd = &nor->mtd; ++ ++ nor->dev = dev; ++ spi_nor_set_flash_node(nor, np); ++ nor->priv = fspi; ++ ++ /* fill the hooks */ ++ nor->read_reg = nxp_fspi_read_reg; ++ nor->write_reg = nxp_fspi_write_reg; ++ nor->read = nxp_fspi_read; ++ nor->write = nxp_fspi_write; ++ nor->erase = nxp_fspi_erase; ++ ++ nor->prepare = nxp_fspi_prep; ++ nor->unprepare = nxp_fspi_unprep; ++ ++ ret = of_property_read_u32(np, "spi-max-frequency", ++ &fspi->clk_rate); ++ if (ret < 0) ++ goto next_node; ++ ++ /* set the chip address for READID */ ++ nxp_fspi_set_base_addr(fspi, nor); ++ ++ ret = of_property_read_u32(np, "spi-rx-bus-width", ++ &fspi->spi_rx_bus_width); ++ if (ret < 0) ++ fspi->spi_rx_bus_width = FSPI_SINGLE_MODE; ++ ++ ret = of_property_read_u32(np, "spi-tx-bus-width", ++ &fspi->spi_tx_bus_width); ++ if (ret < 0) ++ fspi->spi_tx_bus_width = FSPI_SINGLE_MODE; ++ ++ ret = spi_nor_scan(nor, NULL, &hwcaps); ++ if (ret) ++ goto next_node; ++ ++ ret = mtd_device_register(mtd, NULL, 0); ++ if (ret) ++ goto next_node; ++ ++ /* Set the correct NOR size now. */ ++ if (fspi->nor_size == 0) { ++ fspi->nor_size = mtd->size; ++ ++ /* Map the SPI NOR to accessiable address */ ++ nxp_fspi_set_map_addr(fspi); + } - } else { - ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0, - dev_name(&pdev->dev), sport); ---- a/kernel/events/core.c -+++ b/kernel/events/core.c -@@ -3763,6 +3763,12 @@ int perf_event_read_local(struct perf_ev - goto out; - } ++ ++ /* ++ * The write is working in the unit of the TX FIFO, ++ * not in the unit of the SPI NOR's page size. ++ * ++ * So shrink the spi_nor->page_size if it is larger then the ++ * TX FIFO. ++ */ ++ if (nor->page_size > fspi->devtype_data->txfifo) ++ nor->page_size = fspi->devtype_data->txfifo; ++ ++ find_node++; ++next_node: ++ i++; ++ } ++ ++ if (find_node == 0) ++ goto mutex_failed; ++ ++ /* finish the rest init. */ ++ ret = nxp_fspi_nor_setup_last(fspi); ++ if (ret) ++ goto last_init_failed; ++ ++ nxp_fspi_clk_disable_unprep(fspi); ++ return 0; ++ ++last_init_failed: ++ for (i = 0; i < fspi->nor_num; i++) { ++ /* skip the holes */ ++ if (!fspi->has_second_chip) ++ i *= 2; ++ mtd_device_unregister(&fspi->mtd[i]); ++ } ++mutex_failed: ++ mutex_destroy(&fspi->lock); ++irq_failed: ++ nxp_fspi_clk_disable_unprep(fspi); ++clk_failed: ++ dev_err(dev, "NXP FSPI probe failed\n"); ++ return ret; ++} ++ ++static int nxp_fspi_remove(struct platform_device *pdev) ++{ ++ struct nxp_fspi *fspi = platform_get_drvdata(pdev); ++ int i; ++ ++ for (i = 0; i < fspi->nor_num; i++) { ++ /* skip the holes */ ++ if (!fspi->has_second_chip) ++ i *= 2; ++ mtd_device_unregister(&fspi->nor[i].mtd); ++ } ++ ++ /* disable the hardware */ ++ writel(FSPI_MCR0_MDIS_MASK, fspi->iobase + FSPI_MCR0); ++ ++ mutex_destroy(&fspi->lock); ++ ++ if (fspi->ahb_addr) ++ iounmap(fspi->ahb_addr); ++ ++ return 0; ++} ++ ++static int nxp_fspi_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ return 0; ++} ++ ++static int nxp_fspi_resume(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++static struct platform_driver nxp_fspi_driver = { ++ .driver = { ++ .name = "nxp-fspi", ++ .bus = &platform_bus_type, ++ .of_match_table = nxp_fspi_dt_ids, ++ }, ++ .probe = nxp_fspi_probe, ++ .remove = nxp_fspi_remove, ++ .suspend = nxp_fspi_suspend, ++ .resume = nxp_fspi_resume, ++}; ++module_platform_driver(nxp_fspi_driver); ++ ++MODULE_DESCRIPTION("NXP FSPI Controller Driver"); ++MODULE_AUTHOR("NXP Semiconductor"); ++MODULE_LICENSE("GPL v2"); +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -269,6 +269,7 @@ static inline int set_4byte(struct spi_n + u8 cmd; -+ /* If this is a pinned event it must be running on this CPU */ -+ if (event->attr.pinned && event->oncpu != smp_processor_id()) { -+ ret = -EBUSY; -+ goto out; -+ } -+ - /* - * If the event is currently on this CPU, its either a per-task event, - * or local to this CPU. Furthermore it means its ACTIVE (otherwise ---- a/sound/soc/soc-dapm.c -+++ b/sound/soc/soc-dapm.c -@@ -4036,6 +4036,13 @@ int snd_soc_dapm_link_dai_widgets(struct - continue; - } + switch (JEDEC_MFR(info)) { ++ case SNOR_MFR_ST: + case SNOR_MFR_MICRON: + /* Some Micron need WREN command; all will accept it */ + need_wren = true; +@@ -1039,7 +1040,7 @@ static const struct flash_info spi_nor_i + { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, -+ /* let users know there is no DAI to link */ -+ if (!dai_w->priv) { -+ dev_dbg(card->dev, "dai widget %s has no DAI\n", -+ dai_w->name); -+ continue; -+ } +- /* Micron */ ++ /* Micron <--> ST Micro */ + { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_QUAD_READ) }, + { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, + { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, +@@ -1054,6 +1055,12 @@ static const struct flash_info spi_nor_i + { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + ++ /* Micron */ ++ { ++ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512, ++ SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES) ++ }, + - dai = dai_w->priv; + /* PMC */ + { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, + { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, +@@ -2431,6 +2438,7 @@ static int spi_nor_init_params(struct sp + params->quad_enable = macronix_quad_enable; + break; + ++ case SNOR_MFR_ST: + case SNOR_MFR_MICRON: + break; + +@@ -2749,7 +2757,8 @@ int spi_nor_scan(struct spi_nor *nor, co + mtd->_read = spi_nor_read; + + /* NOR protection support for STmicro/Micron chips and similar */ +- if (JEDEC_MFR(info) == SNOR_MFR_MICRON || ++ if (JEDEC_MFR(info) == SNOR_MFR_ST || ++ JEDEC_MFR(info) == SNOR_MFR_MICRON || + JEDEC_MFR(info) == SNOR_MFR_WINBOND || + info->flags & SPI_NOR_HAS_LOCK) { + nor->flash_lock = stm_lock; +--- a/include/linux/mtd/cfi.h ++++ b/include/linux/mtd/cfi.h +@@ -377,6 +377,7 @@ struct cfi_fixup { + #define CFI_MFR_SHARP 0x00B0 + #define CFI_MFR_SST 0x00BF + #define CFI_MFR_ST 0x0020 /* STMicroelectronics */ ++#define CFI_MFR_MICRON 0x002C /* Micron */ + #define CFI_MFR_TOSHIBA 0x0098 + #define CFI_MFR_WINBOND 0x00DA - /* ...find all widgets with the same stream and link them */ +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -23,7 +23,8 @@ + #define SNOR_MFR_ATMEL CFI_MFR_ATMEL + #define SNOR_MFR_GIGADEVICE 0xc8 + #define SNOR_MFR_INTEL CFI_MFR_INTEL +-#define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */ ++#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */ ++#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */ + #define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX + #define SNOR_MFR_SPANSION CFI_MFR_AMD + #define SNOR_MFR_SST CFI_MFR_SST diff --git a/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch b/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch index d6e1e3afb4..1085368f18 100644 --- a/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch @@ -1,63 +1,89 @@ -From c503e92983f2e18c1e18e21b15d5bedd6d0be8ac Mon Sep 17 00:00:00 2001 -From: Biwen Li -Date: Tue, 30 Oct 2018 18:26:56 +0800 -Subject: [PATCH 33/40] pcie: support layerscape +From c54a010fe105281259b996d318ed85efc4103fee Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Mon, 6 May 2019 15:18:05 +0800 +Subject: [PATCH] pcie: support layerscape + This is an integrated patch of pcie for layerscape Signed-off-by: Bao Xiaowei +Signed-off-by: Bhumika Goyal +Signed-off-by: Biwen Li Signed-off-by: Bjorn Helgaas +Signed-off-by: Christoph Hellwig +Signed-off-by: Cyrille Pitchen +Signed-off-by: Dan Carpenter +Signed-off-by: Geert Uytterhoeven +Signed-off-by: Gustavo Pimentel Signed-off-by: Hou Zhiqiang +Signed-off-by: Jia-Ju Bai +Signed-off-by: Kishon Vijay Abraham I +Signed-off-by: Lorenzo Pieralisi Signed-off-by: Minghuan Lian +Signed-off-by: Niklas Cassel Signed-off-by: Po Liu +Signed-off-by: Rob Herring +Signed-off-by: Rolf Evers-Fischer +Signed-off-by: Subrahmanya Lingappa +Signed-off-by: Xiaowei Bao Signed-off-by: Zhang Ying-22455 -Signed-off-by: Biwen Li +Signed-off-by: Yangbo Lu --- - .../bindings/pci/layerscape-pci.txt | 14 +- - arch/arm/kernel/bios32.c | 43 ++++++ - arch/arm64/kernel/pci.c | 43 ++++++ - drivers/misc/pci_endpoint_test.c | 20 +-- - drivers/pci/dwc/Kconfig | 8 ++ - drivers/pci/dwc/pci-layerscape.c | 132 +++++++++++++++++- - drivers/pci/endpoint/functions/pci-epf-test.c | 2 +- - drivers/pci/endpoint/pci-epf-core.c | 8 +- - drivers/pci/pcie/portdrv_core.c | 29 ++++ - drivers/pci/quirks.c | 15 ++ + arch/arm/kernel/bios32.c | 43 ++ + arch/arm64/kernel/pci.c | 43 ++ + drivers/misc/pci_endpoint_test.c | 332 ++++++++++--- + drivers/pci/Kconfig | 1 + + drivers/pci/dwc/Kconfig | 39 +- + drivers/pci/dwc/Makefile | 2 +- + drivers/pci/dwc/pci-dra7xx.c | 9 - + drivers/pci/dwc/pci-layerscape-ep.c | 146 ++++++ + drivers/pci/dwc/pci-layerscape.c | 12 + + drivers/pci/dwc/pcie-designware-ep.c | 338 ++++++++++++-- + drivers/pci/dwc/pcie-designware-host.c | 5 +- + drivers/pci/dwc/pcie-designware-plat.c | 159 ++++++- + drivers/pci/dwc/pcie-designware.c | 5 +- + drivers/pci/dwc/pcie-designware.h | 57 ++- + drivers/pci/endpoint/Kconfig | 1 + + drivers/pci/endpoint/Makefile | 1 + + drivers/pci/endpoint/functions/Kconfig | 1 + + drivers/pci/endpoint/functions/Makefile | 1 + + drivers/pci/endpoint/functions/pci-epf-test.c | 191 +++++--- + drivers/pci/endpoint/pci-ep-cfs.c | 95 +++- + drivers/pci/endpoint/pci-epc-core.c | 159 +++++-- + drivers/pci/endpoint/pci-epc-mem.c | 13 +- + drivers/pci/endpoint/pci-epf-core.c | 116 +++-- + drivers/pci/host/pci-host-common.c | 8 - + drivers/pci/host/pcie-xilinx-nwl.c | 9 - + drivers/pci/host/pcie-xilinx.c | 7 - + drivers/pci/mobiveil/Kconfig | 50 ++ + drivers/pci/mobiveil/Makefile | 7 + + drivers/pci/mobiveil/pci-layerscape-gen4-ep.c | 178 +++++++ + drivers/pci/mobiveil/pci-layerscape-gen4.c | 292 ++++++++++++ + drivers/pci/mobiveil/pcie-mobiveil-ep.c | 512 +++++++++++++++++++++ + drivers/pci/mobiveil/pcie-mobiveil-host.c | 640 ++++++++++++++++++++++++++ + drivers/pci/mobiveil/pcie-mobiveil-plat.c | 54 +++ + drivers/pci/mobiveil/pcie-mobiveil.c | 334 ++++++++++++++ + drivers/pci/mobiveil/pcie-mobiveil.h | 296 ++++++++++++ + drivers/pci/pcie/portdrv_core.c | 29 ++ + drivers/pci/quirks.c | 15 + + include/linux/pci-ep-cfs.h | 5 +- + include/linux/pci-epc.h | 73 +-- + include/linux/pci-epf.h | 12 +- include/linux/pci.h | 1 + - 11 files changed, 292 insertions(+), 23 deletions(-) + include/uapi/linux/pcitest.h | 3 + + tools/pci/pcitest.c | 51 +- + tools/pci/pcitest.sh | 15 + + 44 files changed, 3917 insertions(+), 443 deletions(-) + create mode 100644 drivers/pci/dwc/pci-layerscape-ep.c + create mode 100644 drivers/pci/mobiveil/Kconfig + create mode 100644 drivers/pci/mobiveil/Makefile + create mode 100644 drivers/pci/mobiveil/pci-layerscape-gen4-ep.c + create mode 100644 drivers/pci/mobiveil/pci-layerscape-gen4.c + create mode 100644 drivers/pci/mobiveil/pcie-mobiveil-ep.c + create mode 100644 drivers/pci/mobiveil/pcie-mobiveil-host.c + create mode 100644 drivers/pci/mobiveil/pcie-mobiveil-plat.c + create mode 100644 drivers/pci/mobiveil/pcie-mobiveil.c + create mode 100644 drivers/pci/mobiveil/pcie-mobiveil.h ---- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt -+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt -@@ -18,11 +18,16 @@ Required properties: - "fsl,ls2088a-pcie" - "fsl,ls1088a-pcie" - "fsl,ls1046a-pcie" -+ "fsl,ls1012a-pcie" - - reg: base addresses and lengths of the PCIe controller register blocks. - - interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. --- interrupt-names: Must include the following entries: -- "intr": The interrupt that is asserted for controller interrupts -+- interrupt-names: It could include the following entries: -+ "aer": Asserted for aer interrupt when chip support the aer interrupt with -+ none MSI/MSI-X/INTx mode,but there is interrupt line for aer. -+ "pme": Asserted for pme interrupt when chip support the pme interrupt with -+ none MSI/MSI-X/INTx mode,but there is interrupt line for pme. -+ ...... - - fsl,pcie-scfg: Must include two entries. - The first entry must be a link to the SCFG device node - The second entry must be '0' or '1' based on physical PCIe controller index. -@@ -38,8 +43,9 @@ Example: - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; -- interrupts = ; /* controller interrupt */ -- interrupt-names = "intr"; -+ interrupts = , /* aer interrupt */ -+ ; /* pme interrupt */ -+ interrupt-names = "aer", "pme"; - fsl,pcie-scfg = <&scfg 0>; - #address-cells = <3>; - #size-cells = <2>; --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -12,6 +12,8 @@ @@ -178,80 +204,553 @@ Signed-off-by: Biwen Li int raw_pci_read(unsigned int domain, unsigned int bus, --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c -@@ -97,6 +97,8 @@ struct pci_endpoint_test { +@@ -35,38 +35,45 @@ + + #include + +-#define DRV_MODULE_NAME "pci-endpoint-test" ++#define DRV_MODULE_NAME "pci-endpoint-test" + +-#define PCI_ENDPOINT_TEST_MAGIC 0x0 ++#define IRQ_TYPE_UNDEFINED -1 ++#define IRQ_TYPE_LEGACY 0 ++#define IRQ_TYPE_MSI 1 ++#define IRQ_TYPE_MSIX 2 ++ ++#define PCI_ENDPOINT_TEST_MAGIC 0x0 ++ ++#define PCI_ENDPOINT_TEST_COMMAND 0x4 ++#define COMMAND_RAISE_LEGACY_IRQ BIT(0) ++#define COMMAND_RAISE_MSI_IRQ BIT(1) ++#define COMMAND_RAISE_MSIX_IRQ BIT(2) ++#define COMMAND_READ BIT(3) ++#define COMMAND_WRITE BIT(4) ++#define COMMAND_COPY BIT(5) ++ ++#define PCI_ENDPOINT_TEST_STATUS 0x8 ++#define STATUS_READ_SUCCESS BIT(0) ++#define STATUS_READ_FAIL BIT(1) ++#define STATUS_WRITE_SUCCESS BIT(2) ++#define STATUS_WRITE_FAIL BIT(3) ++#define STATUS_COPY_SUCCESS BIT(4) ++#define STATUS_COPY_FAIL BIT(5) ++#define STATUS_IRQ_RAISED BIT(6) ++#define STATUS_SRC_ADDR_INVALID BIT(7) ++#define STATUS_DST_ADDR_INVALID BIT(8) + +-#define PCI_ENDPOINT_TEST_COMMAND 0x4 +-#define COMMAND_RAISE_LEGACY_IRQ BIT(0) +-#define COMMAND_RAISE_MSI_IRQ BIT(1) +-#define MSI_NUMBER_SHIFT 2 +-/* 6 bits for MSI number */ +-#define COMMAND_READ BIT(8) +-#define COMMAND_WRITE BIT(9) +-#define COMMAND_COPY BIT(10) +- +-#define PCI_ENDPOINT_TEST_STATUS 0x8 +-#define STATUS_READ_SUCCESS BIT(0) +-#define STATUS_READ_FAIL BIT(1) +-#define STATUS_WRITE_SUCCESS BIT(2) +-#define STATUS_WRITE_FAIL BIT(3) +-#define STATUS_COPY_SUCCESS BIT(4) +-#define STATUS_COPY_FAIL BIT(5) +-#define STATUS_IRQ_RAISED BIT(6) +-#define STATUS_SRC_ADDR_INVALID BIT(7) +-#define STATUS_DST_ADDR_INVALID BIT(8) +- +-#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0xc ++#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0x0c + #define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10 + + #define PCI_ENDPOINT_TEST_LOWER_DST_ADDR 0x14 + #define PCI_ENDPOINT_TEST_UPPER_DST_ADDR 0x18 + +-#define PCI_ENDPOINT_TEST_SIZE 0x1c +-#define PCI_ENDPOINT_TEST_CHECKSUM 0x20 ++#define PCI_ENDPOINT_TEST_SIZE 0x1c ++#define PCI_ENDPOINT_TEST_CHECKSUM 0x20 ++ ++#define PCI_ENDPOINT_TEST_IRQ_TYPE 0x24 ++#define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28 + + static DEFINE_IDA(pci_endpoint_test_ida); + +@@ -77,6 +84,10 @@ static bool no_msi; + module_param(no_msi, bool, 0444); + MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in pci_endpoint_test"); + ++static int irq_type = IRQ_TYPE_MSI; ++module_param(irq_type, int, 0444); ++MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test (0 - Legacy, 1 - MSI, 2 - MSI-X)"); ++ + enum pci_barno { + BAR_0, + BAR_1, +@@ -92,6 +103,7 @@ struct pci_endpoint_test { + void __iomem *bar[6]; + struct completion irq_raised; + int last_irq; ++ int num_irqs; + /* mutex to protect the ioctls */ + struct mutex mutex; struct miscdevice miscdev; +@@ -102,7 +114,7 @@ struct pci_endpoint_test { + struct pci_endpoint_test_data { enum pci_barno test_reg_bar; size_t alignment; -+ char name[20]; -+ int irq_num; +- bool no_msi; ++ int irq_type; }; - struct pci_endpoint_test_data { -@@ -454,9 +456,7 @@ static int pci_endpoint_test_probe(struc + static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test, +@@ -146,6 +158,100 @@ static irqreturn_t pci_endpoint_test_irq + return IRQ_HANDLED; + } + ++static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test) ++{ ++ struct pci_dev *pdev = test->pdev; ++ ++ pci_free_irq_vectors(pdev); ++} ++ ++static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test, ++ int type) ++{ ++ int irq = -1; ++ struct pci_dev *pdev = test->pdev; ++ struct device *dev = &pdev->dev; ++ bool res = true; ++ ++ switch (type) { ++ case IRQ_TYPE_LEGACY: ++ irq = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_LEGACY); ++ if (irq < 0) ++ dev_err(dev, "Failed to get Legacy interrupt\n"); ++ break; ++ case IRQ_TYPE_MSI: ++ irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI); ++ if (irq < 0) ++ dev_err(dev, "Failed to get MSI interrupts\n"); ++ break; ++ case IRQ_TYPE_MSIX: ++ irq = pci_alloc_irq_vectors(pdev, 1, 2048, PCI_IRQ_MSIX); ++ if (irq < 0) ++ dev_err(dev, "Failed to get MSI-X interrupts\n"); ++ break; ++ default: ++ dev_err(dev, "Invalid IRQ type selected\n"); ++ } ++ ++ if (irq < 0) { ++ irq = 0; ++ res = false; ++ } ++ test->num_irqs = irq; ++ ++ return res; ++} ++ ++static void pci_endpoint_test_release_irq(struct pci_endpoint_test *test) ++{ ++ int i; ++ struct pci_dev *pdev = test->pdev; ++ struct device *dev = &pdev->dev; ++ ++ for (i = 0; i < test->num_irqs; i++) ++ devm_free_irq(dev, pci_irq_vector(pdev, i), test); ++ ++ test->num_irqs = 0; ++} ++ ++static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test) ++{ ++ int i; ++ int err; ++ struct pci_dev *pdev = test->pdev; ++ struct device *dev = &pdev->dev; ++ ++ for (i = 0; i < test->num_irqs; i++) { ++ err = devm_request_irq(dev, pci_irq_vector(pdev, i), ++ pci_endpoint_test_irqhandler, ++ IRQF_SHARED, DRV_MODULE_NAME, test); ++ if (err) ++ goto fail; ++ } ++ ++ return true; ++ ++fail: ++ switch (irq_type) { ++ case IRQ_TYPE_LEGACY: ++ dev_err(dev, "Failed to request IRQ %d for Legacy\n", ++ pci_irq_vector(pdev, i)); ++ break; ++ case IRQ_TYPE_MSI: ++ dev_err(dev, "Failed to request IRQ %d for MSI %d\n", ++ pci_irq_vector(pdev, i), ++ i + 1); ++ break; ++ case IRQ_TYPE_MSIX: ++ dev_err(dev, "Failed to request IRQ %d for MSI-X %d\n", ++ pci_irq_vector(pdev, i), ++ i + 1); ++ break; ++ } ++ ++ return false; ++} ++ + static bool pci_endpoint_test_bar(struct pci_endpoint_test *test, + enum pci_barno barno) + { +@@ -178,6 +284,9 @@ static bool pci_endpoint_test_legacy_irq + { + u32 val; + ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, ++ IRQ_TYPE_LEGACY); ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 0); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, + COMMAND_RAISE_LEGACY_IRQ); + val = wait_for_completion_timeout(&test->irq_raised, +@@ -189,20 +298,24 @@ static bool pci_endpoint_test_legacy_irq + } + + static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, +- u8 msi_num) ++ u16 msi_num, bool msix) + { + u32 val; + struct pci_dev *pdev = test->pdev; + ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, ++ msix == false ? IRQ_TYPE_MSI : ++ IRQ_TYPE_MSIX); ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, msi_num); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, +- msi_num << MSI_NUMBER_SHIFT | +- COMMAND_RAISE_MSI_IRQ); ++ msix == false ? COMMAND_RAISE_MSI_IRQ : ++ COMMAND_RAISE_MSIX_IRQ); + val = wait_for_completion_timeout(&test->irq_raised, + msecs_to_jiffies(1000)); + if (!val) + return false; + +- if (test->last_irq - pdev->irq == msi_num - 1) ++ if (pci_irq_vector(pdev, msi_num - 1) == test->last_irq) + return true; + + return false; +@@ -226,10 +339,18 @@ static bool pci_endpoint_test_copy(struc + u32 src_crc32; + u32 dst_crc32; + ++ if (size > SIZE_MAX - alignment) ++ goto err; ++ ++ if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) { ++ dev_err(dev, "Invalid IRQ type option\n"); ++ goto err; ++ } ++ + orig_src_addr = dma_alloc_coherent(dev, size + alignment, + &orig_src_phys_addr, GFP_KERNEL); + if (!orig_src_addr) { +- dev_err(dev, "failed to allocate source buffer\n"); ++ dev_err(dev, "Failed to allocate source buffer\n"); + ret = false; + goto err; + } +@@ -255,7 +376,7 @@ static bool pci_endpoint_test_copy(struc + orig_dst_addr = dma_alloc_coherent(dev, size + alignment, + &orig_dst_phys_addr, GFP_KERNEL); + if (!orig_dst_addr) { +- dev_err(dev, "failed to allocate destination address\n"); ++ dev_err(dev, "Failed to allocate destination address\n"); + ret = false; + goto err_orig_src_addr; + } +@@ -277,8 +398,10 @@ static bool pci_endpoint_test_copy(struc + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, + size); + ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, +- 1 << MSI_NUMBER_SHIFT | COMMAND_COPY); ++ COMMAND_COPY); + + wait_for_completion(&test->irq_raised); + +@@ -311,10 +434,18 @@ static bool pci_endpoint_test_write(stru + size_t alignment = test->alignment; + u32 crc32; + ++ if (size > SIZE_MAX - alignment) ++ goto err; ++ ++ if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) { ++ dev_err(dev, "Invalid IRQ type option\n"); ++ goto err; ++ } ++ + orig_addr = dma_alloc_coherent(dev, size + alignment, &orig_phys_addr, + GFP_KERNEL); + if (!orig_addr) { +- dev_err(dev, "failed to allocate address\n"); ++ dev_err(dev, "Failed to allocate address\n"); + ret = false; + goto err; + } +@@ -341,8 +472,10 @@ static bool pci_endpoint_test_write(stru + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); + ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, +- 1 << MSI_NUMBER_SHIFT | COMMAND_READ); ++ COMMAND_READ); + + wait_for_completion(&test->irq_raised); + +@@ -369,10 +502,18 @@ static bool pci_endpoint_test_read(struc + size_t alignment = test->alignment; + u32 crc32; + ++ if (size > SIZE_MAX - alignment) ++ goto err; ++ ++ if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) { ++ dev_err(dev, "Invalid IRQ type option\n"); ++ goto err; ++ } ++ + orig_addr = dma_alloc_coherent(dev, size + alignment, &orig_phys_addr, + GFP_KERNEL); + if (!orig_addr) { +- dev_err(dev, "failed to allocate destination address\n"); ++ dev_err(dev, "Failed to allocate destination address\n"); + ret = false; + goto err; + } +@@ -393,8 +534,10 @@ static bool pci_endpoint_test_read(struc + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); + ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); ++ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, +- 1 << MSI_NUMBER_SHIFT | COMMAND_WRITE); ++ COMMAND_WRITE); + + wait_for_completion(&test->irq_raised); + +@@ -407,6 +550,38 @@ err: + return ret; + } + ++static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test, ++ int req_irq_type) ++{ ++ struct pci_dev *pdev = test->pdev; ++ struct device *dev = &pdev->dev; ++ ++ if (req_irq_type < IRQ_TYPE_LEGACY || req_irq_type > IRQ_TYPE_MSIX) { ++ dev_err(dev, "Invalid IRQ type option\n"); ++ return false; ++ } ++ ++ if (irq_type == req_irq_type) ++ return true; ++ ++ pci_endpoint_test_release_irq(test); ++ pci_endpoint_test_free_irq_vectors(test); ++ ++ if (!pci_endpoint_test_alloc_irq_vectors(test, req_irq_type)) ++ goto err; ++ ++ if (!pci_endpoint_test_request_irq(test)) ++ goto err; ++ ++ irq_type = req_irq_type; ++ return true; ++ ++err: ++ pci_endpoint_test_free_irq_vectors(test); ++ irq_type = IRQ_TYPE_UNDEFINED; ++ return false; ++} ++ + static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) + { +@@ -426,7 +601,8 @@ static long pci_endpoint_test_ioctl(stru + ret = pci_endpoint_test_legacy_irq(test); + break; + case PCITEST_MSI: +- ret = pci_endpoint_test_msi_irq(test, arg); ++ case PCITEST_MSIX: ++ ret = pci_endpoint_test_msi_irq(test, arg, cmd == PCITEST_MSIX); + break; + case PCITEST_WRITE: + ret = pci_endpoint_test_write(test, arg); +@@ -437,6 +613,12 @@ static long pci_endpoint_test_ioctl(stru + case PCITEST_COPY: + ret = pci_endpoint_test_copy(test, arg); + break; ++ case PCITEST_SET_IRQTYPE: ++ ret = pci_endpoint_test_set_irq(test, arg); ++ break; ++ case PCITEST_GET_IRQTYPE: ++ ret = irq_type; ++ break; + } + + ret: +@@ -452,9 +634,7 @@ static const struct file_operations pci_ + static int pci_endpoint_test_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { - int i; +- int i; int err; - int irq = 0; int id; -- char name[20]; + char name[20]; enum pci_barno bar; - void __iomem *base; - struct device *dev = &pdev->dev; -@@ -501,19 +501,19 @@ static int pci_endpoint_test_probe(struc +@@ -476,11 +656,14 @@ static int pci_endpoint_test_probe(struc + test->alignment = 0; + test->pdev = pdev; + ++ if (no_msi) ++ irq_type = IRQ_TYPE_LEGACY; ++ + data = (struct pci_endpoint_test_data *)ent->driver_data; + if (data) { + test_reg_bar = data->test_reg_bar; + test->alignment = data->alignment; +- no_msi = data->no_msi; ++ irq_type = data->irq_type; + } + + init_completion(&test->irq_raised); +@@ -500,35 +683,21 @@ static int pci_endpoint_test_probe(struc + pci_set_master(pdev); - if (!no_msi) { +- if (!no_msi) { - irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI); - if (irq < 0) -+ test->irq_num = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI); -+ if (test->irq_num < 0) - dev_err(dev, "failed to get MSI interrupts\n"); - } +- dev_err(dev, "failed to get MSI interrupts\n"); +- } ++ if (!pci_endpoint_test_alloc_irq_vectors(test, irq_type)) ++ goto err_disable_irq; - err = devm_request_irq(dev, pdev->irq, pci_endpoint_test_irqhandler, -+ err = request_irq(pdev->irq, pci_endpoint_test_irqhandler, - IRQF_SHARED, DRV_MODULE_NAME, test); - if (err) { - dev_err(dev, "failed to request IRQ %d\n", pdev->irq); - goto err_disable_msi; +- IRQF_SHARED, DRV_MODULE_NAME, test); +- if (err) { +- dev_err(dev, "failed to request IRQ %d\n", pdev->irq); +- goto err_disable_msi; +- } +- +- for (i = 1; i < irq; i++) { +- err = devm_request_irq(dev, pdev->irq + i, +- pci_endpoint_test_irqhandler, +- IRQF_SHARED, DRV_MODULE_NAME, test); +- if (err) +- dev_err(dev, "failed to request IRQ %d for MSI %d\n", +- pdev->irq + i, i + 1); +- } ++ if (!pci_endpoint_test_request_irq(test)) ++ goto err_disable_irq; + + for (bar = BAR_0; bar <= BAR_5; bar++) { +- base = pci_ioremap_bar(pdev, bar); +- if (!base) { +- dev_err(dev, "failed to read BAR%d\n", bar); +- WARN_ON(bar == test_reg_bar); ++ if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) { ++ base = pci_ioremap_bar(pdev, bar); ++ if (!base) { ++ dev_err(dev, "Failed to read BAR%d\n", bar); ++ WARN_ON(bar == test_reg_bar); ++ } ++ test->bar[bar] = base; + } +- test->bar[bar] = base; } -- for (i = 1; i < irq; i++) { -+ for (i = 1; i < test->irq_num; i++) { - err = devm_request_irq(dev, pdev->irq + i, - pci_endpoint_test_irqhandler, - IRQF_SHARED, DRV_MODULE_NAME, test); -@@ -548,10 +548,10 @@ static int pci_endpoint_test_probe(struc + test->base = test->bar[test_reg_bar]; +@@ -544,24 +713,31 @@ static int pci_endpoint_test_probe(struc + id = ida_simple_get(&pci_endpoint_test_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + err = id; +- dev_err(dev, "unable to get id\n"); ++ dev_err(dev, "Unable to get id\n"); goto err_iounmap; } -- snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id); -+ snprintf(test->name, sizeof(test->name), DRV_MODULE_NAME ".%d", id); + snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id); misc_device = &test->miscdev; misc_device->minor = MISC_DYNAMIC_MINOR; - misc_device->name = name; -+ misc_device->name = test->name; ++ misc_device->name = kstrdup(name, GFP_KERNEL); ++ if (!misc_device->name) { ++ err = -ENOMEM; ++ goto err_ida_remove; ++ } misc_device->fops = &pci_endpoint_test_fops, err = misc_register(misc_device); -@@ -584,6 +584,7 @@ err_disable_pdev: - static void pci_endpoint_test_remove(struct pci_dev *pdev) - { - int id; -+ int i; - enum pci_barno bar; - struct pci_endpoint_test *test = pci_get_drvdata(pdev); - struct miscdevice *misc_device = &test->miscdev; -@@ -599,6 +600,8 @@ static void pci_endpoint_test_remove(str + if (err) { +- dev_err(dev, "failed to register device\n"); +- goto err_ida_remove; ++ dev_err(dev, "Failed to register device\n"); ++ goto err_kfree_name; + } + + return 0; + ++err_kfree_name: ++ kfree(misc_device->name); ++ + err_ida_remove: + ida_simple_remove(&pci_endpoint_test_ida, id); + +@@ -570,9 +746,10 @@ err_iounmap: + if (test->bar[bar]) + pci_iounmap(pdev, test->bar[bar]); + } ++ pci_endpoint_test_release_irq(test); + +-err_disable_msi: +- pci_disable_msi(pdev); ++err_disable_irq: ++ pci_endpoint_test_free_irq_vectors(test); + pci_release_regions(pdev); + + err_disable_pdev: +@@ -594,12 +771,16 @@ static void pci_endpoint_test_remove(str + return; + + misc_deregister(&test->miscdev); ++ kfree(misc_device->name); + ida_simple_remove(&pci_endpoint_test_ida, id); + for (bar = BAR_0; bar <= BAR_5; bar++) { if (test->bar[bar]) pci_iounmap(pdev, test->bar[bar]); } -+ for (i = 0; i < test->irq_num; i++) -+ free_irq(pdev->irq + i, test); - pci_disable_msi(pdev); +- pci_disable_msi(pdev); ++ ++ pci_endpoint_test_release_irq(test); ++ pci_endpoint_test_free_irq_vectors(test); ++ pci_release_regions(pdev); pci_disable_device(pdev); -@@ -607,6 +610,7 @@ static void pci_endpoint_test_remove(str + } +@@ -607,6 +788,7 @@ static void pci_endpoint_test_remove(str static const struct pci_device_id pci_endpoint_test_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) }, { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) }, @@ -259,63 +758,254 @@ Signed-off-by: Biwen Li { } }; MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl); +--- a/drivers/pci/Kconfig ++++ b/drivers/pci/Kconfig +@@ -142,6 +142,7 @@ config PCI_HYPERV + + source "drivers/pci/hotplug/Kconfig" + source "drivers/pci/dwc/Kconfig" ++source "drivers/pci/mobiveil/Kconfig" + source "drivers/pci/host/Kconfig" + source "drivers/pci/endpoint/Kconfig" + source "drivers/pci/switch/Kconfig" --- a/drivers/pci/dwc/Kconfig +++ b/drivers/pci/dwc/Kconfig -@@ -111,6 +111,14 @@ config PCI_LAYERSCAPE - help - Say Y here if you want PCIe controller support on Layerscape SoCs. +@@ -50,17 +50,36 @@ config PCI_DRA7XX_EP + endif -+config PCI_LAYERSCAPE_EP -+ bool "PCI layerscape Endpoint Mode" + config PCIE_DW_PLAT +- bool "Platform bus based DesignWare PCIe Controller" +- depends on PCI +- depends on PCI_MSI_IRQ_DOMAIN +- select PCIE_DW_HOST +- ---help--- +- This selects the DesignWare PCIe controller support. Select this if +- you have a PCIe controller on Platform bus. ++ bool + +- If you have a controller with this interface, say Y or M here. ++config PCIE_DW_PLAT_HOST ++ bool "Platform bus based DesignWare PCIe Controller - Host mode" ++ depends on PCI && PCI_MSI_IRQ_DOMAIN ++ select PCIE_DW_HOST ++ select PCIE_DW_PLAT ++ help ++ Enables support for the PCIe controller in the Designware IP to ++ work in host mode. There are two instances of PCIe controller in ++ Designware IP. ++ This controller can work either as EP or RC. In order to enable ++ host-specific features PCIE_DW_PLAT_HOST must be selected and in ++ order to enable device-specific features PCI_DW_PLAT_EP must be ++ selected. + +- If unsure, say N. ++config PCIE_DW_PLAT_EP ++ bool "Platform bus based DesignWare PCIe Controller - Endpoint mode" ++ depends on PCI && PCI_MSI_IRQ_DOMAIN + depends on PCI_ENDPOINT + select PCIE_DW_EP ++ select PCIE_DW_PLAT + help -+ Enables support for the PCIe controller in the layerscape SoC to work in -+ endpoint mode. ++ Enables support for the PCIe controller in the Designware IP to ++ work in endpoint mode. There are two instances of PCIe controller ++ in Designware IP. ++ This controller can work either as EP or RC. In order to enable ++ host-specific features PCIE_DW_PLAT_HOST must be selected and in ++ order to enable device-specific features PCI_DW_PLAT_EP must be ++ selected. + + config PCI_EXYNOS + bool "Samsung Exynos PCIe controller" +--- a/drivers/pci/dwc/Makefile ++++ b/drivers/pci/dwc/Makefile +@@ -10,7 +10,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o + obj-$(CONFIG_PCI_IMX6) += pci-imx6.o + obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o + obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o +-obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o ++obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o + obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o + obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o + obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o +--- a/drivers/pci/dwc/pci-dra7xx.c ++++ b/drivers/pci/dwc/pci-dra7xx.c +@@ -337,15 +337,6 @@ static irqreturn_t dra7xx_pcie_irq_handl + return IRQ_HANDLED; + } + +-static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar) +-{ +- u32 reg; +- +- reg = PCI_BASE_ADDRESS_0 + (4 * bar); +- dw_pcie_writel_dbi2(pci, reg, 0x0); +- dw_pcie_writel_dbi(pci, reg, 0x0); +-} +- + static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep) + { + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); +--- /dev/null ++++ b/drivers/pci/dwc/pci-layerscape-ep.c +@@ -0,0 +1,146 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * PCIe controller EP driver for Freescale Layerscape SoCs ++ * ++ * Copyright (C) 2018 NXP Semiconductor. ++ * ++ * Author: Xiaowei Bao ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-designware.h" ++ ++#define PCIE_DBI2_OFFSET 0x1000 /* DBI2 base address*/ ++ ++struct ls_pcie_ep { ++ struct dw_pcie *pci; ++}; ++ ++#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev) ++ ++static int ls_pcie_establish_link(struct dw_pcie *pci) ++{ ++ return 0; ++} ++ ++static const struct dw_pcie_ops ls_pcie_ep_ops = { ++ .start_link = ls_pcie_establish_link, ++}; ++ ++static const struct of_device_id ls_pcie_ep_of_match[] = { ++ { .compatible = "fsl,ls-pcie-ep",}, ++ { }, ++}; ++ ++static void ls_pcie_ep_init(struct dw_pcie_ep *ep) ++{ ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ struct pci_epc *epc = ep->epc; ++ enum pci_barno bar; ++ ++ for (bar = BAR_0; bar <= BAR_5; bar++) ++ dw_pcie_ep_reset_bar(pci, bar); ++ ++ epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER; ++} ++ ++static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no, ++ enum pci_epc_irq_type type, u16 interrupt_num) ++{ ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ ++ switch (type) { ++ case PCI_EPC_IRQ_LEGACY: ++ return dw_pcie_ep_raise_legacy_irq(ep, func_no); ++ case PCI_EPC_IRQ_MSI: ++ return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num); ++ case PCI_EPC_IRQ_MSIX: ++ return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num); ++ default: ++ dev_err(pci->dev, "UNKNOWN IRQ type\n"); ++ return -EINVAL; ++ } ++} ++ ++static struct dw_pcie_ep_ops pcie_ep_ops = { ++ .ep_init = ls_pcie_ep_init, ++ .raise_irq = ls_pcie_ep_raise_irq, ++}; ++ ++static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, ++ struct platform_device *pdev) ++{ ++ struct dw_pcie *pci = pcie->pci; ++ struct device *dev = pci->dev; ++ struct dw_pcie_ep *ep; ++ struct resource *res; ++ int ret; ++ ++ ep = &pci->ep; ++ ep->ops = &pcie_ep_ops; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); ++ if (!res) ++ return -EINVAL; ++ ++ ep->phys_base = res->start; ++ ep->addr_size = resource_size(res); ++ ++ ret = dw_pcie_ep_init(ep); ++ if (ret) { ++ dev_err(dev, "failed to initialize endpoint\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int __init ls_pcie_ep_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct dw_pcie *pci; ++ struct ls_pcie_ep *pcie; ++ struct resource *dbi_base; ++ int ret; ++ ++ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); ++ if (!pcie) ++ return -ENOMEM; ++ ++ pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); ++ if (!pci) ++ return -ENOMEM; ++ ++ dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); ++ pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base); ++ if (IS_ERR(pci->dbi_base)) ++ return PTR_ERR(pci->dbi_base); ++ ++ pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET; ++ pci->dev = dev; ++ pci->ops = &ls_pcie_ep_ops; ++ pcie->pci = pci; ++ ++ platform_set_drvdata(pdev, pcie); + - config PCI_HISI - depends on OF && ARM64 - bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" ++ ret = ls_add_pcie_ep(pcie, pdev); ++ ++ return ret; ++} ++ ++static struct platform_driver ls_pcie_ep_driver = { ++ .driver = { ++ .name = "layerscape-pcie-ep", ++ .of_match_table = ls_pcie_ep_of_match, ++ .suppress_bind_attrs = true, ++ }, ++}; ++builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe); --- a/drivers/pci/dwc/pci-layerscape.c +++ b/drivers/pci/dwc/pci-layerscape.c -@@ -33,8 +33,15 @@ +@@ -33,6 +33,8 @@ /* PEX Internal Configuration Registers */ #define PCIE_STRFMR1 0x71c /* Symbol Timer & Filter Mask Register1 */ +#define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */ +#define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */ -+#define PCIE_DBI2_BASE 0x1000 /* DBI2 base address*/ -+#define PCIE_MSI_MSG_DATA_OFF 0x5c /* MSI Data register address*/ -+#define PCIE_MSI_OB_SIZE 4096 -+#define PCIE_MSI_ADDR_OFFSET (1024 * 1024) #define PCIE_IATU_NUM 6 -+#define PCIE_EP_ADDR_SPACE_SIZE 0x100000000 - - struct ls_pcie_drvdata { - u32 lut_offset; -@@ -44,12 +51,20 @@ struct ls_pcie_drvdata { - const struct dw_pcie_ops *dw_pcie_ops; - }; - -+struct ls_pcie_ep { -+ dma_addr_t msi_phys_addr; -+ void __iomem *msi_virt_addr; -+ u64 msi_msg_addr; -+ u16 msi_msg_data; -+}; -+ - struct ls_pcie { - struct dw_pcie *pci; - void __iomem *lut; - struct regmap *scfg; - const struct ls_pcie_drvdata *drvdata; - int index; -+ struct ls_pcie_ep *pcie_ep; - }; - #define to_ls_pcie(x) dev_get_drvdata((x)->dev) -@@ -124,6 +139,14 @@ static int ls_pcie_link_up(struct dw_pci +@@ -124,6 +126,14 @@ static int ls_pcie_link_up(struct dw_pci return 1; } @@ -330,7 +1020,7 @@ Signed-off-by: Biwen Li static int ls_pcie_host_init(struct pcie_port *pp) { struct dw_pcie *pci = to_dw_pcie_from_pp(pp); -@@ -135,6 +158,7 @@ static int ls_pcie_host_init(struct pcie +@@ -135,6 +145,7 @@ static int ls_pcie_host_init(struct pcie * dw_pcie_setup_rc() will reconfigure the outbound windows. */ ls_pcie_disable_outbound_atus(pcie); @@ -338,7 +1028,7 @@ Signed-off-by: Biwen Li dw_pcie_dbi_ro_wr_en(pci); ls_pcie_clear_multifunction(pcie); -@@ -253,6 +277,7 @@ static struct ls_pcie_drvdata ls2088_drv +@@ -253,6 +264,7 @@ static struct ls_pcie_drvdata ls2088_drv }; static const struct of_device_id ls_pcie_of_match[] = { @@ -346,167 +1036,4603 @@ Signed-off-by: Biwen Li { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata }, -@@ -263,6 +288,99 @@ static const struct of_device_id ls_pcie - { }, - }; +--- a/drivers/pci/dwc/pcie-designware-ep.c ++++ b/drivers/pci/dwc/pcie-designware-ep.c +@@ -1,20 +1,9 @@ ++// SPDX-License-Identifier: GPL-2.0 + /** + * Synopsys DesignWare PCIe Endpoint controller driver + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . + */ -+static void ls_pcie_raise_msi_irq(struct ls_pcie_ep *pcie_ep) + #include +@@ -30,7 +19,8 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep + pci_epc_linkup(epc); + } + +-static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar) ++static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar, ++ int flags) + { + u32 reg; + +@@ -38,10 +28,52 @@ static void dw_pcie_ep_reset_bar(struct + dw_pcie_dbi_ro_wr_en(pci); + dw_pcie_writel_dbi2(pci, reg, 0x0); + dw_pcie_writel_dbi(pci, reg, 0x0); ++ if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) { ++ dw_pcie_writel_dbi2(pci, reg + 4, 0x0); ++ dw_pcie_writel_dbi(pci, reg + 4, 0x0); ++ } + dw_pcie_dbi_ro_wr_dis(pci); + } + +-static int dw_pcie_ep_write_header(struct pci_epc *epc, ++void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar) +{ -+ iowrite32(pcie_ep->msi_msg_data, pcie_ep->msi_virt_addr); ++ __dw_pcie_ep_reset_bar(pci, bar, 0); +} + -+static int ls_pcie_raise_irq(struct dw_pcie_ep *ep, -+ enum pci_epc_irq_type type, u8 interrupt_num) ++static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8 cap_ptr, ++ u8 cap) +{ -+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); -+ struct ls_pcie *pcie = to_ls_pcie(pci); -+ struct ls_pcie_ep *pcie_ep = pcie->pcie_ep; -+ u32 free_win; -+ -+ /* get the msi message address and msi message data */ -+ pcie_ep->msi_msg_addr = ioread32(pci->dbi_base + MSI_MESSAGE_ADDR_L32) | -+ (((u64)ioread32(pci->dbi_base + MSI_MESSAGE_ADDR_U32)) << 32); -+ pcie_ep->msi_msg_data = ioread16(pci->dbi_base + PCIE_MSI_MSG_DATA_OFF); -+ -+ /* request and config the outband window for msi */ -+ free_win = find_first_zero_bit(&ep->ob_window_map, -+ sizeof(ep->ob_window_map)); -+ if (free_win >= ep->num_ob_windows) { -+ dev_err(pci->dev, "no free outbound window\n"); -+ return -ENOMEM; -+ } -+ -+ dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM, -+ pcie_ep->msi_phys_addr, -+ pcie_ep->msi_msg_addr, -+ PCIE_MSI_OB_SIZE); ++ u8 cap_id, next_cap_ptr; ++ u16 reg; + -+ set_bit(free_win, &ep->ob_window_map); ++ reg = dw_pcie_readw_dbi(pci, cap_ptr); ++ next_cap_ptr = (reg & 0xff00) >> 8; ++ cap_id = (reg & 0x00ff); + -+ /* generate the msi interrupt */ -+ ls_pcie_raise_msi_irq(pcie_ep); ++ if (!next_cap_ptr || cap_id > PCI_CAP_ID_MAX) ++ return 0; + -+ /* release the outband window of msi */ -+ dw_pcie_disable_atu(pci, free_win, DW_PCIE_REGION_OUTBOUND); -+ clear_bit(free_win, &ep->ob_window_map); ++ if (cap_id == cap) ++ return cap_ptr; + -+ return 0; ++ return __dw_pcie_ep_find_next_cap(pci, next_cap_ptr, cap); +} + -+static struct dw_pcie_ep_ops pcie_ep_ops = { -+ .raise_irq = ls_pcie_raise_irq, -+}; -+ -+static int __init ls_add_pcie_ep(struct ls_pcie *pcie, -+ struct platform_device *pdev) ++static u8 dw_pcie_ep_find_capability(struct dw_pcie *pci, u8 cap) +{ -+ struct dw_pcie *pci = pcie->pci; -+ struct device *dev = pci->dev; -+ struct dw_pcie_ep *ep; -+ struct ls_pcie_ep *pcie_ep; -+ struct resource *cfg_res; -+ int ret; ++ u8 next_cap_ptr; ++ u16 reg; + -+ ep = &pci->ep; -+ ep->ops = &pcie_ep_ops; ++ reg = dw_pcie_readw_dbi(pci, PCI_CAPABILITY_LIST); ++ next_cap_ptr = (reg & 0x00ff); + -+ pcie_ep = devm_kzalloc(dev, sizeof(*pcie_ep), GFP_KERNEL); -+ if (!pcie_ep) -+ return -ENOMEM; ++ if (!next_cap_ptr) ++ return 0; + -+ pcie->pcie_ep = pcie_ep; ++ return __dw_pcie_ep_find_next_cap(pci, next_cap_ptr, cap); ++} + -+ cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); -+ if (cfg_res) { -+ ep->phys_base = cfg_res->start; -+ ep->addr_size = PCIE_EP_ADDR_SPACE_SIZE; -+ } else { -+ dev_err(dev, "missing *config* space\n"); ++static int dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no, + struct pci_epf_header *hdr) + { + struct dw_pcie_ep *ep = epc_get_drvdata(epc); +@@ -74,8 +106,7 @@ static int dw_pcie_ep_inbound_atu(struct + u32 free_win; + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); + +- free_win = find_first_zero_bit(&ep->ib_window_map, +- sizeof(ep->ib_window_map)); ++ free_win = find_first_zero_bit(ep->ib_window_map, ep->num_ib_windows); + if (free_win >= ep->num_ib_windows) { + dev_err(pci->dev, "no free inbound window\n"); + return -EINVAL; +@@ -89,7 +120,7 @@ static int dw_pcie_ep_inbound_atu(struct + } + + ep->bar_to_atu[bar] = free_win; +- set_bit(free_win, &ep->ib_window_map); ++ set_bit(free_win, ep->ib_window_map); + + return 0; + } +@@ -100,8 +131,7 @@ static int dw_pcie_ep_outbound_atu(struc + u32 free_win; + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); + +- free_win = find_first_zero_bit(&ep->ob_window_map, +- sizeof(ep->ob_window_map)); ++ free_win = find_first_zero_bit(ep->ob_window_map, ep->num_ob_windows); + if (free_win >= ep->num_ob_windows) { + dev_err(pci->dev, "no free outbound window\n"); + return -EINVAL; +@@ -110,30 +140,35 @@ static int dw_pcie_ep_outbound_atu(struc + dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM, + phys_addr, pci_addr, size); + +- set_bit(free_win, &ep->ob_window_map); ++ set_bit(free_win, ep->ob_window_map); + ep->outbound_addr[free_win] = phys_addr; + + return 0; + } + +-static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar) ++static void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar) + { + struct dw_pcie_ep *ep = epc_get_drvdata(epc); + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ enum pci_barno bar = epf_bar->barno; + u32 atu_index = ep->bar_to_atu[bar]; + +- dw_pcie_ep_reset_bar(pci, bar); ++ __dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags); + + dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND); +- clear_bit(atu_index, &ep->ib_window_map); ++ clear_bit(atu_index, ep->ib_window_map); + } + +-static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar, +- dma_addr_t bar_phys, size_t size, int flags) ++static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar) + { + int ret; + struct dw_pcie_ep *ep = epc_get_drvdata(epc); + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ enum pci_barno bar = epf_bar->barno; ++ size_t size = epf_bar->size; ++ int flags = epf_bar->flags; + enum dw_pcie_as_type as_type; + u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar); + +@@ -142,13 +177,20 @@ static int dw_pcie_ep_set_bar(struct pci + else + as_type = DW_PCIE_AS_IO; + +- ret = dw_pcie_ep_inbound_atu(ep, bar, bar_phys, as_type); ++ ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr, as_type); + if (ret) + return ret; + + dw_pcie_dbi_ro_wr_en(pci); +- dw_pcie_writel_dbi2(pci, reg, size - 1); ++ ++ dw_pcie_writel_dbi2(pci, reg, lower_32_bits(size - 1)); + dw_pcie_writel_dbi(pci, reg, flags); ++ ++ if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) { ++ dw_pcie_writel_dbi2(pci, reg + 4, upper_32_bits(size - 1)); ++ dw_pcie_writel_dbi(pci, reg + 4, 0); ++ } ++ + dw_pcie_dbi_ro_wr_dis(pci); + + return 0; +@@ -169,7 +211,8 @@ static int dw_pcie_find_index(struct dw_ + return -EINVAL; + } + +-static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, phys_addr_t addr) ++static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t addr) + { + int ret; + u32 atu_index; +@@ -181,10 +224,11 @@ static void dw_pcie_ep_unmap_addr(struct + return; + + dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_OUTBOUND); +- clear_bit(atu_index, &ep->ob_window_map); ++ clear_bit(atu_index, ep->ob_window_map); + } + +-static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr, ++static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t addr, + u64 pci_addr, size_t size) + { + int ret; +@@ -200,45 +244,93 @@ static int dw_pcie_ep_map_addr(struct pc + return 0; + } + +-static int dw_pcie_ep_get_msi(struct pci_epc *epc) ++static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no) + { +- int val; + struct dw_pcie_ep *ep = epc_get_drvdata(epc); + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msi_cap) ++ return -EINVAL; + +- val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL); +- if (!(val & MSI_CAP_MSI_EN_MASK)) ++ reg = ep->msi_cap + PCI_MSI_FLAGS; ++ val = dw_pcie_readw_dbi(pci, reg); ++ if (!(val & PCI_MSI_FLAGS_ENABLE)) + return -EINVAL; + +- val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT; ++ val = (val & PCI_MSI_FLAGS_QSIZE) >> 4; ++ + return val; + } + +-static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 encode_int) ++static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts) + { +- int val; + struct dw_pcie_ep *ep = epc_get_drvdata(epc); + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msi_cap) ++ return -EINVAL; + +- val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL); +- val &= ~MSI_CAP_MMC_MASK; +- val |= (encode_int << MSI_CAP_MMC_SHIFT) & MSI_CAP_MMC_MASK; ++ reg = ep->msi_cap + PCI_MSI_FLAGS; ++ val = dw_pcie_readw_dbi(pci, reg); ++ val &= ~PCI_MSI_FLAGS_QMASK; ++ val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; + dw_pcie_dbi_ro_wr_en(pci); +- dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val); ++ dw_pcie_writew_dbi(pci, reg, val); + dw_pcie_dbi_ro_wr_dis(pci); + + return 0; + } + +-static int dw_pcie_ep_raise_irq(struct pci_epc *epc, +- enum pci_epc_irq_type type, u8 interrupt_num) ++static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no) ++{ ++ struct dw_pcie_ep *ep = epc_get_drvdata(epc); ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msix_cap) ++ return -EINVAL; ++ ++ reg = ep->msix_cap + PCI_MSIX_FLAGS; ++ val = dw_pcie_readw_dbi(pci, reg); ++ if (!(val & PCI_MSIX_FLAGS_ENABLE)) ++ return -EINVAL; ++ ++ val &= PCI_MSIX_FLAGS_QSIZE; ++ ++ return val; ++} ++ ++static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts) ++{ ++ struct dw_pcie_ep *ep = epc_get_drvdata(epc); ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msix_cap) ++ return -EINVAL; ++ ++ reg = ep->msix_cap + PCI_MSIX_FLAGS; ++ val = dw_pcie_readw_dbi(pci, reg); ++ val &= ~PCI_MSIX_FLAGS_QSIZE; ++ val |= interrupts; ++ dw_pcie_dbi_ro_wr_en(pci); ++ dw_pcie_writew_dbi(pci, reg, val); ++ dw_pcie_dbi_ro_wr_dis(pci); ++ ++ return 0; ++} ++ ++static int dw_pcie_ep_raise_irq(struct pci_epc *epc, u8 func_no, ++ enum pci_epc_irq_type type, u16 interrupt_num) + { + struct dw_pcie_ep *ep = epc_get_drvdata(epc); + + if (!ep->ops->raise_irq) + return -EINVAL; + +- return ep->ops->raise_irq(ep, type, interrupt_num); ++ return ep->ops->raise_irq(ep, func_no, type, interrupt_num); + } + + static void dw_pcie_ep_stop(struct pci_epc *epc) +@@ -271,15 +363,130 @@ static const struct pci_epc_ops epc_ops + .unmap_addr = dw_pcie_ep_unmap_addr, + .set_msi = dw_pcie_ep_set_msi, + .get_msi = dw_pcie_ep_get_msi, ++ .set_msix = dw_pcie_ep_set_msix, ++ .get_msix = dw_pcie_ep_get_msix, + .raise_irq = dw_pcie_ep_raise_irq, + .start = dw_pcie_ep_start, + .stop = dw_pcie_ep_stop, + }; + ++int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no) ++{ ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ struct device *dev = pci->dev; ++ ++ dev_err(dev, "EP cannot trigger legacy IRQs\n"); ++ ++ return -EINVAL; ++} ++ ++int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no, ++ u8 interrupt_num) ++{ ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ struct pci_epc *epc = ep->epc; ++ u16 msg_ctrl, msg_data; ++ u32 msg_addr_lower, msg_addr_upper, reg; ++ u64 msg_addr; ++ bool has_upper; ++ int ret; ++ ++ if (!ep->msi_cap) ++ return -EINVAL; ++ ++ /* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */ ++ reg = ep->msi_cap + PCI_MSI_FLAGS; ++ msg_ctrl = dw_pcie_readw_dbi(pci, reg); ++ has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT); ++ reg = ep->msi_cap + PCI_MSI_ADDRESS_LO; ++ msg_addr_lower = dw_pcie_readl_dbi(pci, reg); ++ if (has_upper) { ++ reg = ep->msi_cap + PCI_MSI_ADDRESS_HI; ++ msg_addr_upper = dw_pcie_readl_dbi(pci, reg); ++ reg = ep->msi_cap + PCI_MSI_DATA_64; ++ msg_data = dw_pcie_readw_dbi(pci, reg); ++ } else { ++ msg_addr_upper = 0; ++ reg = ep->msi_cap + PCI_MSI_DATA_32; ++ msg_data = dw_pcie_readw_dbi(pci, reg); ++ } ++ msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower; ++ ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr, ++ epc->mem->page_size); ++ if (ret) ++ return ret; ++ ++ writel(msg_data | (interrupt_num - 1), ep->msi_mem); ++ ++ dw_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys); ++ ++ return 0; ++} ++ ++int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no, ++ u16 interrupt_num) ++{ ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ struct pci_epc *epc = ep->epc; ++ u16 tbl_offset, bir; ++ u32 bar_addr_upper, bar_addr_lower; ++ u32 msg_addr_upper, msg_addr_lower; ++ u32 reg, msg_data, vec_ctrl; ++ u64 tbl_addr, msg_addr, reg_u64; ++ void __iomem *msix_tbl; ++ int ret; ++ ++ reg = ep->msix_cap + PCI_MSIX_TABLE; ++ tbl_offset = dw_pcie_readl_dbi(pci, reg); ++ bir = (tbl_offset & PCI_MSIX_TABLE_BIR); ++ tbl_offset &= PCI_MSIX_TABLE_OFFSET; ++ ++ reg = PCI_BASE_ADDRESS_0 + (4 * bir); ++ bar_addr_upper = 0; ++ bar_addr_lower = dw_pcie_readl_dbi(pci, reg); ++ reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK); ++ if (reg_u64 == PCI_BASE_ADDRESS_MEM_TYPE_64) ++ bar_addr_upper = dw_pcie_readl_dbi(pci, reg + 4); ++ ++ tbl_addr = ((u64) bar_addr_upper) << 32 | bar_addr_lower; ++ tbl_addr += (tbl_offset + ((interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE)); ++ tbl_addr &= PCI_BASE_ADDRESS_MEM_MASK; ++ ++ msix_tbl = ioremap_nocache(ep->phys_base + tbl_addr, ++ PCI_MSIX_ENTRY_SIZE); ++ if (!msix_tbl) ++ return -EINVAL; ++ ++ msg_addr_lower = readl(msix_tbl + PCI_MSIX_ENTRY_LOWER_ADDR); ++ msg_addr_upper = readl(msix_tbl + PCI_MSIX_ENTRY_UPPER_ADDR); ++ msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower; ++ msg_data = readl(msix_tbl + PCI_MSIX_ENTRY_DATA); ++ vec_ctrl = readl(msix_tbl + PCI_MSIX_ENTRY_VECTOR_CTRL); ++ ++ iounmap(msix_tbl); ++ ++ if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT) ++ return -EPERM; ++ ++ ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr, ++ epc->mem->page_size); ++ if (ret) ++ return ret; ++ ++ writel(msg_data, ep->msi_mem); ++ ++ dw_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys); ++ ++ return 0; ++} ++ + void dw_pcie_ep_exit(struct dw_pcie_ep *ep) + { + struct pci_epc *epc = ep->epc; + ++ pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, ++ epc->mem->page_size); ++ + pci_epc_mem_exit(epc); + } + +@@ -293,7 +500,7 @@ int dw_pcie_ep_init(struct dw_pcie_ep *e + struct device_node *np = dev->of_node; + + if (!pci->dbi_base || !pci->dbi_base2) { +- dev_err(dev, "dbi_base/deb_base2 is not populated\n"); ++ dev_err(dev, "dbi_base/dbi_base2 is not populated\n"); + return -EINVAL; + } + +@@ -302,12 +509,32 @@ int dw_pcie_ep_init(struct dw_pcie_ep *e + dev_err(dev, "unable to read *num-ib-windows* property\n"); + return ret; + } ++ if (ep->num_ib_windows > MAX_IATU_IN) { ++ dev_err(dev, "invalid *num-ib-windows*\n"); ++ return -EINVAL; ++ } + + ret = of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows); + if (ret < 0) { + dev_err(dev, "unable to read *num-ob-windows* property\n"); + return ret; + } ++ if (ep->num_ob_windows > MAX_IATU_OUT) { ++ dev_err(dev, "invalid *num-ob-windows*\n"); ++ return -EINVAL; ++ } ++ ++ ep->ib_window_map = devm_kzalloc(dev, sizeof(long) * ++ BITS_TO_LONGS(ep->num_ib_windows), ++ GFP_KERNEL); ++ if (!ep->ib_window_map) ++ return -ENOMEM; ++ ++ ep->ob_window_map = devm_kzalloc(dev, sizeof(long) * ++ BITS_TO_LONGS(ep->num_ob_windows), ++ GFP_KERNEL); ++ if (!ep->ob_window_map) ++ return -ENOMEM; + + addr = devm_kzalloc(dev, sizeof(phys_addr_t) * ep->num_ob_windows, + GFP_KERNEL); +@@ -315,15 +542,18 @@ int dw_pcie_ep_init(struct dw_pcie_ep *e + return -ENOMEM; + ep->outbound_addr = addr; + +- if (ep->ops->ep_init) +- ep->ops->ep_init(ep); +- + epc = devm_pci_epc_create(dev, &epc_ops); + if (IS_ERR(epc)) { + dev_err(dev, "failed to create epc device\n"); + return PTR_ERR(epc); + } + ++ ep->epc = epc; ++ epc_set_drvdata(epc, ep); ++ ++ if (ep->ops->ep_init) ++ ep->ops->ep_init(ep); ++ + ret = of_property_read_u8(np, "max-functions", &epc->max_functions); + if (ret < 0) + epc->max_functions = 1; +@@ -335,8 +565,16 @@ int dw_pcie_ep_init(struct dw_pcie_ep *e + return ret; + } + +- ep->epc = epc; +- epc_set_drvdata(epc, ep); ++ ep->msi_mem = pci_epc_mem_alloc_addr(epc, &ep->msi_mem_phys, ++ epc->mem->page_size); ++ if (!ep->msi_mem) { ++ dev_err(dev, "Failed to reserve memory for MSI/MSI-X\n"); ++ return -ENOMEM; ++ } ++ ep->msi_cap = dw_pcie_ep_find_capability(pci, PCI_CAP_ID_MSI); ++ ++ ep->msix_cap = dw_pcie_ep_find_capability(pci, PCI_CAP_ID_MSIX); ++ + dw_pcie_setup(pci); + + return 0; +--- a/drivers/pci/dwc/pcie-designware-host.c ++++ b/drivers/pci/dwc/pcie-designware-host.c +@@ -1,3 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0 + /* + * Synopsys DesignWare PCIe host controller driver + * +@@ -5,10 +6,6 @@ + * http://www.samsung.com + * + * Author: Jingoo Han +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 as +- * published by the Free Software Foundation. + */ + + #include +--- a/drivers/pci/dwc/pcie-designware-plat.c ++++ b/drivers/pci/dwc/pcie-designware-plat.c +@@ -1,13 +1,10 @@ ++// SPDX-License-Identifier: GPL-2.0 + /* + * PCIe RC driver for Synopsys DesignWare Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 as +- * published by the Free Software Foundation. + */ + #include + #include +@@ -15,19 +12,29 @@ + #include + #include + #include ++#include + #include + #include + #include + #include + #include + #include ++#include + + #include "pcie-designware.h" + + struct dw_plat_pcie { +- struct dw_pcie *pci; ++ struct dw_pcie *pci; ++ struct regmap *regmap; ++ enum dw_pcie_device_mode mode; ++}; ++ ++struct dw_plat_pcie_of_data { ++ enum dw_pcie_device_mode mode; + }; + ++static const struct of_device_id dw_plat_pcie_of_match[]; ++ + static irqreturn_t dw_plat_pcie_msi_irq_handler(int irq, void *arg) + { + struct pcie_port *pp = arg; +@@ -52,9 +59,58 @@ static const struct dw_pcie_host_ops dw_ + .host_init = dw_plat_pcie_host_init, + }; + +-static int dw_plat_add_pcie_port(struct pcie_port *pp, ++static int dw_plat_pcie_establish_link(struct dw_pcie *pci) ++{ ++ return 0; ++} ++ ++static const struct dw_pcie_ops dw_pcie_ops = { ++ .start_link = dw_plat_pcie_establish_link, ++}; ++ ++static void dw_plat_pcie_ep_init(struct dw_pcie_ep *ep) ++{ ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ struct pci_epc *epc = ep->epc; ++ enum pci_barno bar; ++ ++ for (bar = BAR_0; bar <= BAR_5; bar++) ++ dw_pcie_ep_reset_bar(pci, bar); ++ ++ epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER; ++ epc->features |= EPC_FEATURE_MSIX_AVAILABLE; ++} ++ ++static int dw_plat_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no, ++ enum pci_epc_irq_type type, ++ u16 interrupt_num) ++{ ++ struct dw_pcie *pci = to_dw_pcie_from_ep(ep); ++ ++ switch (type) { ++ case PCI_EPC_IRQ_LEGACY: ++ return dw_pcie_ep_raise_legacy_irq(ep, func_no); ++ case PCI_EPC_IRQ_MSI: ++ return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num); ++ case PCI_EPC_IRQ_MSIX: ++ return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num); ++ default: ++ dev_err(pci->dev, "UNKNOWN IRQ type\n"); ++ } ++ ++ return 0; ++} ++ ++static struct dw_pcie_ep_ops pcie_ep_ops = { ++ .ep_init = dw_plat_pcie_ep_init, ++ .raise_irq = dw_plat_pcie_ep_raise_irq, ++}; ++ ++static int dw_plat_add_pcie_port(struct dw_plat_pcie *dw_plat_pcie, + struct platform_device *pdev) + { ++ struct dw_pcie *pci = dw_plat_pcie->pci; ++ struct pcie_port *pp = &pci->pp; + struct device *dev = &pdev->dev; + int ret; + +@@ -82,15 +138,44 @@ static int dw_plat_add_pcie_port(struct + + ret = dw_pcie_host_init(pp); + if (ret) { +- dev_err(dev, "failed to initialize host\n"); ++ dev_err(dev, "Failed to initialize host\n"); + return ret; + } + + return 0; + } + +-static const struct dw_pcie_ops dw_pcie_ops = { +-}; ++static int dw_plat_add_pcie_ep(struct dw_plat_pcie *dw_plat_pcie, ++ struct platform_device *pdev) ++{ ++ int ret; ++ struct dw_pcie_ep *ep; ++ struct resource *res; ++ struct device *dev = &pdev->dev; ++ struct dw_pcie *pci = dw_plat_pcie->pci; ++ ++ ep = &pci->ep; ++ ep->ops = &pcie_ep_ops; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi2"); ++ pci->dbi_base2 = devm_ioremap_resource(dev, res); ++ if (IS_ERR(pci->dbi_base2)) ++ return PTR_ERR(pci->dbi_base2); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); ++ if (!res) ++ return -EINVAL; ++ ++ ep->phys_base = res->start; ++ ep->addr_size = resource_size(res); ++ ++ ret = dw_pcie_ep_init(ep); ++ if (ret) { ++ dev_err(dev, "Failed to initialize endpoint\n"); ++ return ret; ++ } ++ return 0; ++} + + static int dw_plat_pcie_probe(struct platform_device *pdev) + { +@@ -99,6 +184,16 @@ static int dw_plat_pcie_probe(struct pla + struct dw_pcie *pci; + struct resource *res; /* Resource from DT */ + int ret; ++ const struct of_device_id *match; ++ const struct dw_plat_pcie_of_data *data; ++ enum dw_pcie_device_mode mode; ++ ++ match = of_match_device(dw_plat_pcie_of_match, dev); ++ if (!match) ++ return -EINVAL; ++ ++ data = (struct dw_plat_pcie_of_data *)match->data; ++ mode = (enum dw_pcie_device_mode)data->mode; + + dw_plat_pcie = devm_kzalloc(dev, sizeof(*dw_plat_pcie), GFP_KERNEL); + if (!dw_plat_pcie) +@@ -112,23 +207,59 @@ static int dw_plat_pcie_probe(struct pla + pci->ops = &dw_pcie_ops; + + dw_plat_pcie->pci = pci; ++ dw_plat_pcie->mode = mode; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); ++ if (!res) ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + +- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pci->dbi_base = devm_ioremap_resource(dev, res); + if (IS_ERR(pci->dbi_base)) + return PTR_ERR(pci->dbi_base); + + platform_set_drvdata(pdev, dw_plat_pcie); + +- ret = dw_plat_add_pcie_port(&pci->pp, pdev); +- if (ret < 0) +- return ret; ++ switch (dw_plat_pcie->mode) { ++ case DW_PCIE_RC_TYPE: ++ if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_HOST)) ++ return -ENODEV; ++ ++ ret = dw_plat_add_pcie_port(dw_plat_pcie, pdev); ++ if (ret < 0) ++ return ret; ++ break; ++ case DW_PCIE_EP_TYPE: ++ if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_EP)) ++ return -ENODEV; ++ ++ ret = dw_plat_add_pcie_ep(dw_plat_pcie, pdev); ++ if (ret < 0) ++ return ret; ++ break; ++ default: ++ dev_err(dev, "INVALID device type %d\n", dw_plat_pcie->mode); ++ } + + return 0; + } + ++static const struct dw_plat_pcie_of_data dw_plat_pcie_rc_of_data = { ++ .mode = DW_PCIE_RC_TYPE, ++}; ++ ++static const struct dw_plat_pcie_of_data dw_plat_pcie_ep_of_data = { ++ .mode = DW_PCIE_EP_TYPE, ++}; ++ + static const struct of_device_id dw_plat_pcie_of_match[] = { +- { .compatible = "snps,dw-pcie", }, ++ { ++ .compatible = "snps,dw-pcie", ++ .data = &dw_plat_pcie_rc_of_data, ++ }, ++ { ++ .compatible = "snps,dw-pcie-ep", ++ .data = &dw_plat_pcie_ep_of_data, ++ }, + {}, + }; + +--- a/drivers/pci/dwc/pcie-designware.c ++++ b/drivers/pci/dwc/pcie-designware.c +@@ -1,3 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0 + /* + * Synopsys DesignWare PCIe host controller driver + * +@@ -5,10 +6,6 @@ + * http://www.samsung.com + * + * Author: Jingoo Han +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 as +- * published by the Free Software Foundation. + */ + + #include +--- a/drivers/pci/dwc/pcie-designware.h ++++ b/drivers/pci/dwc/pcie-designware.h +@@ -1,3 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0 + /* + * Synopsys DesignWare PCIe host controller driver + * +@@ -5,10 +6,6 @@ + * http://www.samsung.com + * + * Author: Jingoo Han +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 as +- * published by the Free Software Foundation. + */ + + #ifndef _PCIE_DESIGNWARE_H +@@ -97,15 +94,6 @@ + #define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \ + ((0x3 << 20) | ((region) << 9) | (0x1 << 8)) + +-#define MSI_MESSAGE_CONTROL 0x52 +-#define MSI_CAP_MMC_SHIFT 1 +-#define MSI_CAP_MMC_MASK (7 << MSI_CAP_MMC_SHIFT) +-#define MSI_CAP_MME_SHIFT 4 +-#define MSI_CAP_MSI_EN_MASK 0x1 +-#define MSI_CAP_MME_MASK (7 << MSI_CAP_MME_SHIFT) +-#define MSI_MESSAGE_ADDR_L32 0x54 +-#define MSI_MESSAGE_ADDR_U32 0x58 +- + /* + * Maximum number of MSI IRQs can be 256 per controller. But keep + * it 32 as of now. Probably we will never need more than 32. If needed, +@@ -114,6 +102,10 @@ + #define MAX_MSI_IRQS 32 + #define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32) + ++/* Maximum number of inbound/outbound iATUs */ ++#define MAX_IATU_IN 256 ++#define MAX_IATU_OUT 256 ++ + struct pcie_port; + struct dw_pcie; + struct dw_pcie_ep; +@@ -181,8 +173,8 @@ enum dw_pcie_as_type { + + struct dw_pcie_ep_ops { + void (*ep_init)(struct dw_pcie_ep *ep); +- int (*raise_irq)(struct dw_pcie_ep *ep, enum pci_epc_irq_type type, +- u8 interrupt_num); ++ int (*raise_irq)(struct dw_pcie_ep *ep, u8 func_no, ++ enum pci_epc_irq_type type, u16 interrupt_num); + }; + + struct dw_pcie_ep { +@@ -193,10 +185,14 @@ struct dw_pcie_ep { + size_t page_size; + u8 bar_to_atu[6]; + phys_addr_t *outbound_addr; +- unsigned long ib_window_map; +- unsigned long ob_window_map; ++ unsigned long *ib_window_map; ++ unsigned long *ob_window_map; + u32 num_ib_windows; + u32 num_ob_windows; ++ void __iomem *msi_mem; ++ phys_addr_t msi_mem_phys; ++ u8 msi_cap; /* MSI capability offset */ ++ u8 msix_cap; /* MSI-X capability offset */ + }; + + struct dw_pcie_ops { +@@ -335,6 +331,12 @@ static inline int dw_pcie_host_init(stru + void dw_pcie_ep_linkup(struct dw_pcie_ep *ep); + int dw_pcie_ep_init(struct dw_pcie_ep *ep); + void dw_pcie_ep_exit(struct dw_pcie_ep *ep); ++int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no); ++int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no, ++ u8 interrupt_num); ++int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no, ++ u16 interrupt_num); ++void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar); + #else + static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep) + { +@@ -348,5 +350,26 @@ static inline int dw_pcie_ep_init(struct + static inline void dw_pcie_ep_exit(struct dw_pcie_ep *ep) + { + } ++ ++static inline int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no) ++{ ++ return 0; ++} ++ ++static inline int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no, ++ u8 interrupt_num) ++{ ++ return 0; ++} ++ ++static inline int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no, ++ u16 interrupt_num) ++{ ++ return 0; ++} ++ ++static inline void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar) ++{ ++} + #endif + #endif /* _PCIE_DESIGNWARE_H */ +--- a/drivers/pci/endpoint/Kconfig ++++ b/drivers/pci/endpoint/Kconfig +@@ -1,3 +1,4 @@ ++# SPDX-License-Identifier: GPL-2.0 + # + # PCI Endpoint Support + # +--- a/drivers/pci/endpoint/Makefile ++++ b/drivers/pci/endpoint/Makefile +@@ -1,3 +1,4 @@ ++# SPDX-License-Identifier: GPL-2.0 + # + # Makefile for PCI Endpoint Support + # +--- a/drivers/pci/endpoint/functions/Kconfig ++++ b/drivers/pci/endpoint/functions/Kconfig +@@ -1,3 +1,4 @@ ++# SPDX-License-Identifier: GPL-2.0 + # + # PCI Endpoint Functions + # +--- a/drivers/pci/endpoint/functions/Makefile ++++ b/drivers/pci/endpoint/functions/Makefile +@@ -1,3 +1,4 @@ ++# SPDX-License-Identifier: GPL-2.0 + # + # Makefile for PCI Endpoint Functions + # +--- a/drivers/pci/endpoint/functions/pci-epf-test.c ++++ b/drivers/pci/endpoint/functions/pci-epf-test.c +@@ -1,20 +1,9 @@ ++// SPDX-License-Identifier: GPL-2.0 + /** + * Test driver to test endpoint functionality + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . + */ + + #include +@@ -29,13 +18,16 @@ + #include + #include + ++#define IRQ_TYPE_LEGACY 0 ++#define IRQ_TYPE_MSI 1 ++#define IRQ_TYPE_MSIX 2 ++ + #define COMMAND_RAISE_LEGACY_IRQ BIT(0) + #define COMMAND_RAISE_MSI_IRQ BIT(1) +-#define MSI_NUMBER_SHIFT 2 +-#define MSI_NUMBER_MASK (0x3f << MSI_NUMBER_SHIFT) +-#define COMMAND_READ BIT(8) +-#define COMMAND_WRITE BIT(9) +-#define COMMAND_COPY BIT(10) ++#define COMMAND_RAISE_MSIX_IRQ BIT(2) ++#define COMMAND_READ BIT(3) ++#define COMMAND_WRITE BIT(4) ++#define COMMAND_COPY BIT(5) + + #define STATUS_READ_SUCCESS BIT(0) + #define STATUS_READ_FAIL BIT(1) +@@ -56,6 +48,7 @@ struct pci_epf_test { + struct pci_epf *epf; + enum pci_barno test_reg_bar; + bool linkup_notifier; ++ bool msix_available; + struct delayed_work cmd_handler; + }; + +@@ -67,6 +60,8 @@ struct pci_epf_test_reg { + u64 dst_addr; + u32 size; + u32 checksum; ++ u32 irq_type; ++ u32 irq_number; + } __packed; + + static struct pci_epf_header test_header = { +@@ -81,7 +76,7 @@ struct pci_epf_test_data { + bool linkup_notifier; + }; + +-static int bar_size[] = { 512, 512, 1024, 16384, 131072, 1048576 }; ++static size_t bar_size[] = { 512, 512, 1024, 16384, 131072, 1048576 }; + + static int pci_epf_test_copy(struct pci_epf_test *epf_test) + { +@@ -98,43 +93,45 @@ static int pci_epf_test_copy(struct pci_ + + src_addr = pci_epc_mem_alloc_addr(epc, &src_phys_addr, reg->size); + if (!src_addr) { +- dev_err(dev, "failed to allocate source address\n"); ++ dev_err(dev, "Failed to allocate source address\n"); + reg->status = STATUS_SRC_ADDR_INVALID; + ret = -ENOMEM; + goto err; + } + +- ret = pci_epc_map_addr(epc, src_phys_addr, reg->src_addr, reg->size); ++ ret = pci_epc_map_addr(epc, epf->func_no, src_phys_addr, reg->src_addr, ++ reg->size); + if (ret) { +- dev_err(dev, "failed to map source address\n"); ++ dev_err(dev, "Failed to map source address\n"); + reg->status = STATUS_SRC_ADDR_INVALID; + goto err_src_addr; + } + + dst_addr = pci_epc_mem_alloc_addr(epc, &dst_phys_addr, reg->size); + if (!dst_addr) { +- dev_err(dev, "failed to allocate destination address\n"); ++ dev_err(dev, "Failed to allocate destination address\n"); + reg->status = STATUS_DST_ADDR_INVALID; + ret = -ENOMEM; + goto err_src_map_addr; + } + +- ret = pci_epc_map_addr(epc, dst_phys_addr, reg->dst_addr, reg->size); ++ ret = pci_epc_map_addr(epc, epf->func_no, dst_phys_addr, reg->dst_addr, ++ reg->size); + if (ret) { +- dev_err(dev, "failed to map destination address\n"); ++ dev_err(dev, "Failed to map destination address\n"); + reg->status = STATUS_DST_ADDR_INVALID; + goto err_dst_addr; + } + + memcpy(dst_addr, src_addr, reg->size); + +- pci_epc_unmap_addr(epc, dst_phys_addr); ++ pci_epc_unmap_addr(epc, epf->func_no, dst_phys_addr); + + err_dst_addr: + pci_epc_mem_free_addr(epc, dst_phys_addr, dst_addr, reg->size); + + err_src_map_addr: +- pci_epc_unmap_addr(epc, src_phys_addr); ++ pci_epc_unmap_addr(epc, epf->func_no, src_phys_addr); + + err_src_addr: + pci_epc_mem_free_addr(epc, src_phys_addr, src_addr, reg->size); +@@ -158,15 +155,16 @@ static int pci_epf_test_read(struct pci_ + + src_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size); + if (!src_addr) { +- dev_err(dev, "failed to allocate address\n"); ++ dev_err(dev, "Failed to allocate address\n"); + reg->status = STATUS_SRC_ADDR_INVALID; + ret = -ENOMEM; + goto err; + } + +- ret = pci_epc_map_addr(epc, phys_addr, reg->src_addr, reg->size); ++ ret = pci_epc_map_addr(epc, epf->func_no, phys_addr, reg->src_addr, ++ reg->size); + if (ret) { +- dev_err(dev, "failed to map address\n"); ++ dev_err(dev, "Failed to map address\n"); + reg->status = STATUS_SRC_ADDR_INVALID; + goto err_addr; + } +@@ -186,7 +184,7 @@ static int pci_epf_test_read(struct pci_ + kfree(buf); + + err_map_addr: +- pci_epc_unmap_addr(epc, phys_addr); ++ pci_epc_unmap_addr(epc, epf->func_no, phys_addr); + + err_addr: + pci_epc_mem_free_addr(epc, phys_addr, src_addr, reg->size); +@@ -209,15 +207,16 @@ static int pci_epf_test_write(struct pci + + dst_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size); + if (!dst_addr) { +- dev_err(dev, "failed to allocate address\n"); ++ dev_err(dev, "Failed to allocate address\n"); + reg->status = STATUS_DST_ADDR_INVALID; + ret = -ENOMEM; + goto err; + } + +- ret = pci_epc_map_addr(epc, phys_addr, reg->dst_addr, reg->size); ++ ret = pci_epc_map_addr(epc, epf->func_no, phys_addr, reg->dst_addr, ++ reg->size); + if (ret) { +- dev_err(dev, "failed to map address\n"); ++ dev_err(dev, "Failed to map address\n"); + reg->status = STATUS_DST_ADDR_INVALID; + goto err_addr; + } +@@ -237,12 +236,12 @@ static int pci_epf_test_write(struct pci + * wait 1ms inorder for the write to complete. Without this delay L3 + * error in observed in the host system. + */ +- mdelay(1); ++ usleep_range(1000, 2000); + + kfree(buf); + + err_map_addr: +- pci_epc_unmap_addr(epc, phys_addr); ++ pci_epc_unmap_addr(epc, epf->func_no, phys_addr); + + err_addr: + pci_epc_mem_free_addr(epc, phys_addr, dst_addr, reg->size); +@@ -251,31 +250,42 @@ err: + return ret; + } + +-static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test, u8 irq) ++static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test, u8 irq_type, ++ u16 irq) + { +- u8 msi_count; + struct pci_epf *epf = epf_test->epf; ++ struct device *dev = &epf->dev; + struct pci_epc *epc = epf->epc; + enum pci_barno test_reg_bar = epf_test->test_reg_bar; + struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar]; + + reg->status |= STATUS_IRQ_RAISED; +- msi_count = pci_epc_get_msi(epc); +- if (irq > msi_count || msi_count <= 0) +- pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0); +- else +- pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq); ++ ++ switch (irq_type) { ++ case IRQ_TYPE_LEGACY: ++ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_LEGACY, 0); ++ break; ++ case IRQ_TYPE_MSI: ++ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI, irq); ++ break; ++ case IRQ_TYPE_MSIX: ++ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX, irq); ++ break; ++ default: ++ dev_err(dev, "Failed to raise IRQ, unknown type\n"); ++ break; ++ } + } + + static void pci_epf_test_cmd_handler(struct work_struct *work) + { + int ret; +- u8 irq; +- u8 msi_count; ++ int count; + u32 command; + struct pci_epf_test *epf_test = container_of(work, struct pci_epf_test, + cmd_handler.work); + struct pci_epf *epf = epf_test->epf; ++ struct device *dev = &epf->dev; + struct pci_epc *epc = epf->epc; + enum pci_barno test_reg_bar = epf_test->test_reg_bar; + struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar]; +@@ -287,11 +297,14 @@ static void pci_epf_test_cmd_handler(str + reg->command = 0; + reg->status = 0; + +- irq = (command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT; ++ if (reg->irq_type > IRQ_TYPE_MSIX) { ++ dev_err(dev, "Failed to detect IRQ type\n"); ++ goto reset_handler; ++ } + + if (command & COMMAND_RAISE_LEGACY_IRQ) { + reg->status = STATUS_IRQ_RAISED; +- pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0); ++ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_LEGACY, 0); + goto reset_handler; + } + +@@ -301,7 +314,8 @@ static void pci_epf_test_cmd_handler(str + reg->status |= STATUS_WRITE_FAIL; + else + reg->status |= STATUS_WRITE_SUCCESS; +- pci_epf_test_raise_irq(epf_test, irq); ++ pci_epf_test_raise_irq(epf_test, reg->irq_type, ++ reg->irq_number); + goto reset_handler; + } + +@@ -311,7 +325,8 @@ static void pci_epf_test_cmd_handler(str + reg->status |= STATUS_READ_SUCCESS; + else + reg->status |= STATUS_READ_FAIL; +- pci_epf_test_raise_irq(epf_test, irq); ++ pci_epf_test_raise_irq(epf_test, reg->irq_type, ++ reg->irq_number); + goto reset_handler; + } + +@@ -321,16 +336,28 @@ static void pci_epf_test_cmd_handler(str + reg->status |= STATUS_COPY_SUCCESS; + else + reg->status |= STATUS_COPY_FAIL; +- pci_epf_test_raise_irq(epf_test, irq); ++ pci_epf_test_raise_irq(epf_test, reg->irq_type, ++ reg->irq_number); + goto reset_handler; + } + + if (command & COMMAND_RAISE_MSI_IRQ) { +- msi_count = pci_epc_get_msi(epc); +- if (irq > msi_count || msi_count <= 0) ++ count = pci_epc_get_msi(epc, epf->func_no); ++ if (reg->irq_number > count || count <= 0) ++ goto reset_handler; ++ reg->status = STATUS_IRQ_RAISED; ++ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI, ++ reg->irq_number); ++ goto reset_handler; ++ } ++ ++ if (command & COMMAND_RAISE_MSIX_IRQ) { ++ count = pci_epc_get_msix(epc, epf->func_no); ++ if (reg->irq_number > count || count <= 0) + goto reset_handler; + reg->status = STATUS_IRQ_RAISED; +- pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq); ++ pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX, ++ reg->irq_number); + goto reset_handler; + } + +@@ -351,21 +378,23 @@ static void pci_epf_test_unbind(struct p + { + struct pci_epf_test *epf_test = epf_get_drvdata(epf); + struct pci_epc *epc = epf->epc; ++ struct pci_epf_bar *epf_bar; + int bar; + + cancel_delayed_work(&epf_test->cmd_handler); + pci_epc_stop(epc); + for (bar = BAR_0; bar <= BAR_5; bar++) { ++ epf_bar = &epf->bar[bar]; ++ + if (epf_test->reg[bar]) { + pci_epf_free_space(epf, epf_test->reg[bar], bar); +- pci_epc_clear_bar(epc, bar); ++ pci_epc_clear_bar(epc, epf->func_no, epf_bar); + } + } + } + + static int pci_epf_test_set_bar(struct pci_epf *epf) + { +- int flags; + int bar; + int ret; + struct pci_epf_bar *epf_bar; +@@ -374,20 +403,27 @@ static int pci_epf_test_set_bar(struct p + struct pci_epf_test *epf_test = epf_get_drvdata(epf); + enum pci_barno test_reg_bar = epf_test->test_reg_bar; + +- flags = PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_32; +- if (sizeof(dma_addr_t) == 0x8) +- flags |= PCI_BASE_ADDRESS_MEM_TYPE_64; +- + for (bar = BAR_0; bar <= BAR_5; bar++) { + epf_bar = &epf->bar[bar]; +- ret = pci_epc_set_bar(epc, bar, epf_bar->phys_addr, +- epf_bar->size, flags); ++ ++ epf_bar->flags |= upper_32_bits(epf_bar->size) ? ++ PCI_BASE_ADDRESS_MEM_TYPE_64 : ++ PCI_BASE_ADDRESS_MEM_TYPE_32; ++ ++ ret = pci_epc_set_bar(epc, epf->func_no, epf_bar); + if (ret) { + pci_epf_free_space(epf, epf_test->reg[bar], bar); +- dev_err(dev, "failed to set BAR%d\n", bar); ++ dev_err(dev, "Failed to set BAR%d\n", bar); + if (bar == test_reg_bar) + return ret; + } ++ /* ++ * pci_epc_set_bar() sets PCI_BASE_ADDRESS_MEM_TYPE_64 ++ * if the specific implementation required a 64-bit BAR, ++ * even if we only requested a 32-bit BAR. ++ */ ++ if (epf_bar->flags & PCI_BASE_ADDRESS_MEM_TYPE_64) ++ bar++; + } + + return 0; +@@ -404,7 +440,7 @@ static int pci_epf_test_alloc_space(stru + base = pci_epf_alloc_space(epf, sizeof(struct pci_epf_test_reg), + test_reg_bar); + if (!base) { +- dev_err(dev, "failed to allocated register space\n"); ++ dev_err(dev, "Failed to allocated register space\n"); + return -ENOMEM; + } + epf_test->reg[test_reg_bar] = base; +@@ -414,7 +450,7 @@ static int pci_epf_test_alloc_space(stru + continue; + base = pci_epf_alloc_space(epf, bar_size[bar], bar); + if (!base) +- dev_err(dev, "failed to allocate space for BAR%d\n", ++ dev_err(dev, "Failed to allocate space for BAR%d\n", + bar); + epf_test->reg[bar] = base; + } +@@ -433,9 +469,18 @@ static int pci_epf_test_bind(struct pci_ + if (WARN_ON_ONCE(!epc)) + return -EINVAL; + +- ret = pci_epc_write_header(epc, header); ++ if (epc->features & EPC_FEATURE_NO_LINKUP_NOTIFIER) ++ epf_test->linkup_notifier = false; ++ else ++ epf_test->linkup_notifier = true; ++ ++ epf_test->msix_available = epc->features & EPC_FEATURE_MSIX_AVAILABLE; ++ ++ epf_test->test_reg_bar = EPC_FEATURE_GET_BAR(epc->features); ++ ++ ret = pci_epc_write_header(epc, epf->func_no, header); + if (ret) { +- dev_err(dev, "configuration header write failed\n"); ++ dev_err(dev, "Configuration header write failed\n"); + return ret; + } + +@@ -447,9 +492,19 @@ static int pci_epf_test_bind(struct pci_ + if (ret) + return ret; + +- ret = pci_epc_set_msi(epc, epf->msi_interrupts); +- if (ret) ++ ret = pci_epc_set_msi(epc, epf->func_no, epf->msi_interrupts); ++ if (ret) { ++ dev_err(dev, "MSI configuration failed\n"); + return ret; ++ } ++ ++ if (epf_test->msix_available) { ++ ret = pci_epc_set_msix(epc, epf->func_no, epf->msix_interrupts); ++ if (ret) { ++ dev_err(dev, "MSI-X configuration failed\n"); ++ return ret; ++ } ++ } + + if (!epf_test->linkup_notifier) + queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work); +@@ -517,7 +572,7 @@ static int __init pci_epf_test_init(void + WQ_MEM_RECLAIM | WQ_HIGHPRI, 0); + ret = pci_epf_register_driver(&test_driver); + if (ret) { +- pr_err("failed to register pci epf test driver --> %d\n", ret); ++ pr_err("Failed to register pci epf test driver --> %d\n", ret); + return ret; + } + +--- a/drivers/pci/endpoint/pci-ep-cfs.c ++++ b/drivers/pci/endpoint/pci-ep-cfs.c +@@ -1,35 +1,28 @@ ++// SPDX-License-Identifier: GPL-2.0 + /** + * configfs to configure the PCI endpoint + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . + */ + + #include ++#include + #include + + #include + #include + #include + ++static DEFINE_IDR(functions_idr); ++static DEFINE_MUTEX(functions_mutex); + static struct config_group *functions_group; + static struct config_group *controllers_group; + + struct pci_epf_group { + struct config_group group; + struct pci_epf *epf; ++ int index; + }; + + struct pci_epc_group { +@@ -151,7 +144,7 @@ static struct configfs_item_operations p + .drop_link = pci_epc_epf_unlink, + }; + +-static struct config_item_type pci_epc_type = { ++static const struct config_item_type pci_epc_type = { + .ct_item_ops = &pci_epc_item_ops, + .ct_attrs = pci_epc_attrs, + .ct_owner = THIS_MODULE, +@@ -293,6 +286,28 @@ static ssize_t pci_epf_msi_interrupts_sh + to_pci_epf_group(item)->epf->msi_interrupts); + } + ++static ssize_t pci_epf_msix_interrupts_store(struct config_item *item, ++ const char *page, size_t len) ++{ ++ u16 val; ++ int ret; ++ ++ ret = kstrtou16(page, 0, &val); ++ if (ret) ++ return ret; ++ ++ to_pci_epf_group(item)->epf->msix_interrupts = val; ++ ++ return len; ++} ++ ++static ssize_t pci_epf_msix_interrupts_show(struct config_item *item, ++ char *page) ++{ ++ return sprintf(page, "%d\n", ++ to_pci_epf_group(item)->epf->msix_interrupts); ++} ++ + PCI_EPF_HEADER_R(vendorid) + PCI_EPF_HEADER_W_u16(vendorid) + +@@ -334,6 +349,7 @@ CONFIGFS_ATTR(pci_epf_, subsys_vendor_id + CONFIGFS_ATTR(pci_epf_, subsys_id); + CONFIGFS_ATTR(pci_epf_, interrupt_pin); + CONFIGFS_ATTR(pci_epf_, msi_interrupts); ++CONFIGFS_ATTR(pci_epf_, msix_interrupts); + + static struct configfs_attribute *pci_epf_attrs[] = { + &pci_epf_attr_vendorid, +@@ -347,6 +363,7 @@ static struct configfs_attribute *pci_ep + &pci_epf_attr_subsys_id, + &pci_epf_attr_interrupt_pin, + &pci_epf_attr_msi_interrupts, ++ &pci_epf_attr_msix_interrupts, + NULL, + }; + +@@ -354,6 +371,9 @@ static void pci_epf_release(struct confi + { + struct pci_epf_group *epf_group = to_pci_epf_group(item); + ++ mutex_lock(&functions_mutex); ++ idr_remove(&functions_idr, epf_group->index); ++ mutex_unlock(&functions_mutex); + pci_epf_destroy(epf_group->epf); + kfree(epf_group); + } +@@ -362,7 +382,7 @@ static struct configfs_item_operations p + .release = pci_epf_release, + }; + +-static struct config_item_type pci_epf_type = { ++static const struct config_item_type pci_epf_type = { + .ct_item_ops = &pci_epf_ops, + .ct_attrs = pci_epf_attrs, + .ct_owner = THIS_MODULE, +@@ -373,22 +393,57 @@ static struct config_group *pci_epf_make + { + struct pci_epf_group *epf_group; + struct pci_epf *epf; ++ char *epf_name; ++ int index, err; + + epf_group = kzalloc(sizeof(*epf_group), GFP_KERNEL); + if (!epf_group) + return ERR_PTR(-ENOMEM); + ++ mutex_lock(&functions_mutex); ++ index = idr_alloc(&functions_idr, epf_group, 0, 0, GFP_KERNEL); ++ mutex_unlock(&functions_mutex); ++ if (index < 0) { ++ err = index; ++ goto free_group; ++ } ++ ++ epf_group->index = index; ++ + config_group_init_type_name(&epf_group->group, name, &pci_epf_type); + +- epf = pci_epf_create(group->cg_item.ci_name); ++ epf_name = kasprintf(GFP_KERNEL, "%s.%d", ++ group->cg_item.ci_name, epf_group->index); ++ if (!epf_name) { ++ err = -ENOMEM; ++ goto remove_idr; ++ } ++ ++ epf = pci_epf_create(epf_name); + if (IS_ERR(epf)) { + pr_err("failed to create endpoint function device\n"); +- return ERR_PTR(-EINVAL); ++ err = -EINVAL; ++ goto free_name; + } + + epf_group->epf = epf; + ++ kfree(epf_name); ++ + return &epf_group->group; ++ ++free_name: ++ kfree(epf_name); ++ ++remove_idr: ++ mutex_lock(&functions_mutex); ++ idr_remove(&functions_idr, epf_group->index); ++ mutex_unlock(&functions_mutex); ++ ++free_group: ++ kfree(epf_group); ++ ++ return ERR_PTR(err); + } + + static void pci_epf_drop(struct config_group *group, struct config_item *item) +@@ -401,7 +456,7 @@ static struct configfs_group_operations + .drop_item = &pci_epf_drop, + }; + +-static struct config_item_type pci_epf_group_type = { ++static const struct config_item_type pci_epf_group_type = { + .ct_group_ops = &pci_epf_group_ops, + .ct_owner = THIS_MODULE, + }; +@@ -429,15 +484,15 @@ void pci_ep_cfs_remove_epf_group(struct + } + EXPORT_SYMBOL(pci_ep_cfs_remove_epf_group); + +-static struct config_item_type pci_functions_type = { ++static const struct config_item_type pci_functions_type = { + .ct_owner = THIS_MODULE, + }; + +-static struct config_item_type pci_controllers_type = { ++static const struct config_item_type pci_controllers_type = { + .ct_owner = THIS_MODULE, + }; + +-static struct config_item_type pci_ep_type = { ++static const struct config_item_type pci_ep_type = { + .ct_owner = THIS_MODULE, + }; + +--- a/drivers/pci/endpoint/pci-epc-core.c ++++ b/drivers/pci/endpoint/pci-epc-core.c +@@ -1,20 +1,9 @@ ++// SPDX-License-Identifier: GPL-2.0 + /** + * PCI Endpoint *Controller* (EPC) library + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . + */ + + #include +@@ -141,25 +130,26 @@ EXPORT_SYMBOL_GPL(pci_epc_start); + /** + * pci_epc_raise_irq() - interrupt the host system + * @epc: the EPC device which has to interrupt the host +- * @type: specify the type of interrupt; legacy or MSI +- * @interrupt_num: the MSI interrupt number ++ * @func_no: the endpoint function number in the EPC device ++ * @type: specify the type of interrupt; legacy, MSI or MSI-X ++ * @interrupt_num: the MSI or MSI-X interrupt number + * +- * Invoke to raise an MSI or legacy interrupt ++ * Invoke to raise an legacy, MSI or MSI-X interrupt + */ +-int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type, +- u8 interrupt_num) ++int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, ++ enum pci_epc_irq_type type, u16 interrupt_num) + { + int ret; + unsigned long flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) + return -EINVAL; + + if (!epc->ops->raise_irq) + return 0; + + spin_lock_irqsave(&epc->lock, flags); +- ret = epc->ops->raise_irq(epc, type, interrupt_num); ++ ret = epc->ops->raise_irq(epc, func_no, type, interrupt_num); + spin_unlock_irqrestore(&epc->lock, flags); + + return ret; +@@ -169,22 +159,23 @@ EXPORT_SYMBOL_GPL(pci_epc_raise_irq); + /** + * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated + * @epc: the EPC device to which MSI interrupts was requested ++ * @func_no: the endpoint function number in the EPC device + * + * Invoke to get the number of MSI interrupts allocated by the RC + */ +-int pci_epc_get_msi(struct pci_epc *epc) ++int pci_epc_get_msi(struct pci_epc *epc, u8 func_no) + { + int interrupt; + unsigned long flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) + return 0; + + if (!epc->ops->get_msi) + return 0; + + spin_lock_irqsave(&epc->lock, flags); +- interrupt = epc->ops->get_msi(epc); ++ interrupt = epc->ops->get_msi(epc, func_no); + spin_unlock_irqrestore(&epc->lock, flags); + + if (interrupt < 0) +@@ -199,17 +190,19 @@ EXPORT_SYMBOL_GPL(pci_epc_get_msi); + /** + * pci_epc_set_msi() - set the number of MSI interrupt numbers required + * @epc: the EPC device on which MSI has to be configured ++ * @func_no: the endpoint function number in the EPC device + * @interrupts: number of MSI interrupts required by the EPF + * + * Invoke to set the required number of MSI interrupts. + */ +-int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts) ++int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts) + { + int ret; + u8 encode_int; + unsigned long flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions || ++ interrupts > 32) + return -EINVAL; + + if (!epc->ops->set_msi) +@@ -218,7 +211,7 @@ int pci_epc_set_msi(struct pci_epc *epc, + encode_int = order_base_2(interrupts); + + spin_lock_irqsave(&epc->lock, flags); +- ret = epc->ops->set_msi(epc, encode_int); ++ ret = epc->ops->set_msi(epc, func_no, encode_int); + spin_unlock_irqrestore(&epc->lock, flags); + + return ret; +@@ -226,24 +219,83 @@ int pci_epc_set_msi(struct pci_epc *epc, + EXPORT_SYMBOL_GPL(pci_epc_set_msi); + + /** ++ * pci_epc_get_msix() - get the number of MSI-X interrupt numbers allocated ++ * @epc: the EPC device to which MSI-X interrupts was requested ++ * @func_no: the endpoint function number in the EPC device ++ * ++ * Invoke to get the number of MSI-X interrupts allocated by the RC ++ */ ++int pci_epc_get_msix(struct pci_epc *epc, u8 func_no) ++{ ++ int interrupt; ++ unsigned long flags; ++ ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) ++ return 0; ++ ++ if (!epc->ops->get_msix) ++ return 0; ++ ++ spin_lock_irqsave(&epc->lock, flags); ++ interrupt = epc->ops->get_msix(epc, func_no); ++ spin_unlock_irqrestore(&epc->lock, flags); ++ ++ if (interrupt < 0) ++ return 0; ++ ++ return interrupt + 1; ++} ++EXPORT_SYMBOL_GPL(pci_epc_get_msix); ++ ++/** ++ * pci_epc_set_msix() - set the number of MSI-X interrupt numbers required ++ * @epc: the EPC device on which MSI-X has to be configured ++ * @func_no: the endpoint function number in the EPC device ++ * @interrupts: number of MSI-X interrupts required by the EPF ++ * ++ * Invoke to set the required number of MSI-X interrupts. ++ */ ++int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts) ++{ ++ int ret; ++ unsigned long flags; ++ ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions || ++ interrupts < 1 || interrupts > 2048) ++ return -EINVAL; ++ ++ if (!epc->ops->set_msix) ++ return 0; ++ ++ spin_lock_irqsave(&epc->lock, flags); ++ ret = epc->ops->set_msix(epc, func_no, interrupts - 1); ++ spin_unlock_irqrestore(&epc->lock, flags); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(pci_epc_set_msix); ++ ++/** + * pci_epc_unmap_addr() - unmap CPU address from PCI address + * @epc: the EPC device on which address is allocated ++ * @func_no: the endpoint function number in the EPC device + * @phys_addr: physical address of the local system + * + * Invoke to unmap the CPU address from PCI address. + */ +-void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr) ++void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t phys_addr) + { + unsigned long flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) + return; + + if (!epc->ops->unmap_addr) + return; + + spin_lock_irqsave(&epc->lock, flags); +- epc->ops->unmap_addr(epc, phys_addr); ++ epc->ops->unmap_addr(epc, func_no, phys_addr); + spin_unlock_irqrestore(&epc->lock, flags); + } + EXPORT_SYMBOL_GPL(pci_epc_unmap_addr); +@@ -251,26 +303,27 @@ EXPORT_SYMBOL_GPL(pci_epc_unmap_addr); + /** + * pci_epc_map_addr() - map CPU address to PCI address + * @epc: the EPC device on which address is allocated ++ * @func_no: the endpoint function number in the EPC device + * @phys_addr: physical address of the local system + * @pci_addr: PCI address to which the physical address should be mapped + * @size: the size of the allocation + * + * Invoke to map CPU address with PCI address. + */ +-int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr, +- u64 pci_addr, size_t size) ++int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t phys_addr, u64 pci_addr, size_t size) + { + int ret; + unsigned long flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) + return -EINVAL; + + if (!epc->ops->map_addr) + return 0; + + spin_lock_irqsave(&epc->lock, flags); +- ret = epc->ops->map_addr(epc, phys_addr, pci_addr, size); ++ ret = epc->ops->map_addr(epc, func_no, phys_addr, pci_addr, size); + spin_unlock_irqrestore(&epc->lock, flags); + + return ret; +@@ -280,22 +333,26 @@ EXPORT_SYMBOL_GPL(pci_epc_map_addr); + /** + * pci_epc_clear_bar() - reset the BAR + * @epc: the EPC device for which the BAR has to be cleared +- * @bar: the BAR number that has to be reset ++ * @func_no: the endpoint function number in the EPC device ++ * @epf_bar: the struct epf_bar that contains the BAR information + * + * Invoke to reset the BAR of the endpoint device. + */ +-void pci_epc_clear_bar(struct pci_epc *epc, int bar) ++void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar) + { + unsigned long flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions || ++ (epf_bar->barno == BAR_5 && ++ epf_bar->flags & PCI_BASE_ADDRESS_MEM_TYPE_64)) + return; + + if (!epc->ops->clear_bar) + return; + + spin_lock_irqsave(&epc->lock, flags); +- epc->ops->clear_bar(epc, bar); ++ epc->ops->clear_bar(epc, func_no, epf_bar); + spin_unlock_irqrestore(&epc->lock, flags); + } + EXPORT_SYMBOL_GPL(pci_epc_clear_bar); +@@ -303,26 +360,32 @@ EXPORT_SYMBOL_GPL(pci_epc_clear_bar); + /** + * pci_epc_set_bar() - configure BAR in order for host to assign PCI addr space + * @epc: the EPC device on which BAR has to be configured +- * @bar: the BAR number that has to be configured +- * @size: the size of the addr space +- * @flags: specify memory allocation/io allocation/32bit address/64 bit address ++ * @func_no: the endpoint function number in the EPC device ++ * @epf_bar: the struct epf_bar that contains the BAR information + * + * Invoke to configure the BAR of the endpoint device. + */ +-int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar, +- dma_addr_t bar_phys, size_t size, int flags) ++int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar) + { + int ret; + unsigned long irq_flags; ++ int flags = epf_bar->flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions || ++ (epf_bar->barno == BAR_5 && ++ flags & PCI_BASE_ADDRESS_MEM_TYPE_64) || ++ (flags & PCI_BASE_ADDRESS_SPACE_IO && ++ flags & PCI_BASE_ADDRESS_IO_MASK) || ++ (upper_32_bits(epf_bar->size) && ++ !(flags & PCI_BASE_ADDRESS_MEM_TYPE_64))) + return -EINVAL; + + if (!epc->ops->set_bar) + return 0; + + spin_lock_irqsave(&epc->lock, irq_flags); +- ret = epc->ops->set_bar(epc, bar, bar_phys, size, flags); ++ ret = epc->ops->set_bar(epc, func_no, epf_bar); + spin_unlock_irqrestore(&epc->lock, irq_flags); + + return ret; +@@ -332,6 +395,7 @@ EXPORT_SYMBOL_GPL(pci_epc_set_bar); + /** + * pci_epc_write_header() - write standard configuration header + * @epc: the EPC device to which the configuration header should be written ++ * @func_no: the endpoint function number in the EPC device + * @header: standard configuration header fields + * + * Invoke to write the configuration header to the endpoint controller. Every +@@ -339,19 +403,20 @@ EXPORT_SYMBOL_GPL(pci_epc_set_bar); + * configuration header would be written. The callback function should write + * the header fields to this dedicated location. + */ +-int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *header) ++int pci_epc_write_header(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_header *header) + { + int ret; + unsigned long flags; + +- if (IS_ERR(epc)) ++ if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) + return -EINVAL; + + if (!epc->ops->write_header) + return 0; + + spin_lock_irqsave(&epc->lock, flags); +- ret = epc->ops->write_header(epc, header); ++ ret = epc->ops->write_header(epc, func_no, header); + spin_unlock_irqrestore(&epc->lock, flags); + + return ret; +--- a/drivers/pci/endpoint/pci-epc-mem.c ++++ b/drivers/pci/endpoint/pci-epc-mem.c +@@ -1,20 +1,9 @@ ++// SPDX-License-Identifier: GPL-2.0 + /** + * PCI Endpoint *Controller* Address Space Management + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . + */ + + #include +--- a/drivers/pci/endpoint/pci-epf-core.c ++++ b/drivers/pci/endpoint/pci-epf-core.c +@@ -1,20 +1,9 @@ ++// SPDX-License-Identifier: GPL-2.0 + /** + * PCI Endpoint *Function* (EPF) library + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program. If not, see . + */ + + #include +@@ -26,6 +15,8 @@ + #include + #include + ++static DEFINE_MUTEX(pci_epf_mutex); ++ + static struct bus_type pci_epf_bus_type; + static const struct device_type pci_epf_type; + +@@ -109,6 +100,8 @@ void pci_epf_free_space(struct pci_epf * + + epf->bar[bar].phys_addr = 0; + epf->bar[bar].size = 0; ++ epf->bar[bar].barno = 0; ++ epf->bar[bar].flags = 0; + } + EXPORT_SYMBOL_GPL(pci_epf_free_space); + +@@ -137,11 +130,27 @@ void *pci_epf_alloc_space(struct pci_epf + + epf->bar[bar].phys_addr = phys_addr; + epf->bar[bar].size = size; ++ epf->bar[bar].barno = bar; ++ epf->bar[bar].flags = PCI_BASE_ADDRESS_SPACE_MEMORY; + + return space; + } + EXPORT_SYMBOL_GPL(pci_epf_alloc_space); + ++static void pci_epf_remove_cfs(struct pci_epf_driver *driver) ++{ ++ struct config_group *group, *tmp; ++ ++ if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS)) ++ return; ++ ++ mutex_lock(&pci_epf_mutex); ++ list_for_each_entry_safe(group, tmp, &driver->epf_group, group_entry) ++ pci_ep_cfs_remove_epf_group(group); ++ list_del(&driver->epf_group); ++ mutex_unlock(&pci_epf_mutex); ++} ++ + /** + * pci_epf_unregister_driver() - unregister the PCI EPF driver + * @driver: the PCI EPF driver that has to be unregistered +@@ -150,11 +159,38 @@ EXPORT_SYMBOL_GPL(pci_epf_alloc_space); + */ + void pci_epf_unregister_driver(struct pci_epf_driver *driver) + { +- pci_ep_cfs_remove_epf_group(driver->group); ++ pci_epf_remove_cfs(driver); + driver_unregister(&driver->driver); + } + EXPORT_SYMBOL_GPL(pci_epf_unregister_driver); + ++static int pci_epf_add_cfs(struct pci_epf_driver *driver) ++{ ++ struct config_group *group; ++ const struct pci_epf_device_id *id; ++ ++ if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS)) ++ return 0; ++ ++ INIT_LIST_HEAD(&driver->epf_group); ++ ++ id = driver->id_table; ++ while (id->name[0]) { ++ group = pci_ep_cfs_add_epf_group(id->name); ++ if (IS_ERR(group)) { ++ pci_epf_remove_cfs(driver); ++ return PTR_ERR(group); ++ } ++ ++ mutex_lock(&pci_epf_mutex); ++ list_add_tail(&group->group_entry, &driver->epf_group); ++ mutex_unlock(&pci_epf_mutex); ++ id++; ++ } ++ ++ return 0; ++} ++ + /** + * __pci_epf_register_driver() - register a new PCI EPF driver + * @driver: structure representing PCI EPF driver +@@ -180,7 +216,7 @@ int __pci_epf_register_driver(struct pci + if (ret) + return ret; + +- driver->group = pci_ep_cfs_add_epf_group(driver->driver.name); ++ pci_epf_add_cfs(driver); + + return 0; + } +@@ -211,29 +247,17 @@ struct pci_epf *pci_epf_create(const cha + int ret; + struct pci_epf *epf; + struct device *dev; +- char *func_name; +- char *buf; ++ int len; + + epf = kzalloc(sizeof(*epf), GFP_KERNEL); +- if (!epf) { +- ret = -ENOMEM; +- goto err_ret; +- } ++ if (!epf) ++ return ERR_PTR(-ENOMEM); + +- buf = kstrdup(name, GFP_KERNEL); +- if (!buf) { +- ret = -ENOMEM; +- goto free_epf; +- } +- +- func_name = buf; +- buf = strchrnul(buf, '.'); +- *buf = '\0'; +- +- epf->name = kstrdup(func_name, GFP_KERNEL); ++ len = strchrnul(name, '.') - name; ++ epf->name = kstrndup(name, len, GFP_KERNEL); + if (!epf->name) { +- ret = -ENOMEM; +- goto free_func_name; ++ kfree(epf); ++ return ERR_PTR(-ENOMEM); + } + + dev = &epf->dev; +@@ -242,28 +266,18 @@ struct pci_epf *pci_epf_create(const cha + dev->type = &pci_epf_type; + + ret = dev_set_name(dev, "%s", name); +- if (ret) +- goto put_dev; ++ if (ret) { ++ put_device(dev); ++ return ERR_PTR(ret); ++ } + + ret = device_add(dev); +- if (ret) +- goto put_dev; ++ if (ret) { ++ put_device(dev); ++ return ERR_PTR(ret); ++ } + +- kfree(func_name); + return epf; +- +-put_dev: +- put_device(dev); +- kfree(epf->name); +- +-free_func_name: +- kfree(func_name); +- +-free_epf: +- kfree(epf); +- +-err_ret: +- return ERR_PTR(ret); + } + EXPORT_SYMBOL_GPL(pci_epf_create); + +--- a/drivers/pci/host/pci-host-common.c ++++ b/drivers/pci/host/pci-host-common.c +@@ -113,9 +113,7 @@ err_out: + int pci_host_common_probe(struct platform_device *pdev, + struct pci_ecam_ops *ops) + { +- const char *type; + struct device *dev = &pdev->dev; +- struct device_node *np = dev->of_node; + struct pci_bus *bus, *child; + struct pci_host_bridge *bridge; + struct pci_config_window *cfg; +@@ -126,12 +124,6 @@ int pci_host_common_probe(struct platfor + if (!bridge) + return -ENOMEM; + +- type = of_get_property(np, "device_type", NULL); +- if (!type || strcmp(type, "pci")) { +- dev_err(dev, "invalid \"device_type\" %s\n", type); +- return -EINVAL; +- } +- + of_pci_check_probe_only(); + + /* Parse and map our Configuration Space windows */ +--- a/drivers/pci/host/pcie-xilinx-nwl.c ++++ b/drivers/pci/host/pcie-xilinx-nwl.c +@@ -779,16 +779,7 @@ static int nwl_pcie_parse_dt(struct nwl_ + struct platform_device *pdev) + { + struct device *dev = pcie->dev; +- struct device_node *node = dev->of_node; + struct resource *res; +- const char *type; +- +- /* Check for device type */ +- type = of_get_property(node, "device_type", NULL); +- if (!type || strcmp(type, "pci")) { +- dev_err(dev, "invalid \"device_type\" %s\n", type); +- return -EINVAL; +- } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg"); + pcie->breg_base = devm_ioremap_resource(dev, res); +--- a/drivers/pci/host/pcie-xilinx.c ++++ b/drivers/pci/host/pcie-xilinx.c +@@ -576,15 +576,8 @@ static int xilinx_pcie_parse_dt(struct x + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct resource regs; +- const char *type; + int err; + +- type = of_get_property(node, "device_type", NULL); +- if (!type || strcmp(type, "pci")) { +- dev_err(dev, "invalid \"device_type\" %s\n", type); +- return -EINVAL; +- } +- + err = of_address_to_resource(node, 0, ®s); + if (err) { + dev_err(dev, "missing \"reg\" property\n"); +--- /dev/null ++++ b/drivers/pci/mobiveil/Kconfig +@@ -0,0 +1,50 @@ ++# SPDX-License-Identifier: GPL-2.0 ++ ++menu "Mobiveil PCIe Core Support" ++ depends on PCI ++ ++config PCIE_MOBIVEIL ++ bool ++ ++config PCIE_MOBIVEIL_HOST ++ bool ++ depends on PCI_MSI_IRQ_DOMAIN ++ select PCIE_MOBIVEIL ++ ++config PCIE_MOBIVEIL_EP ++ bool ++ depends on PCI_ENDPOINT ++ select PCIE_MOBIVEIL ++ ++config PCIE_MOBIVEIL_PLAT ++ bool "Mobiveil AXI PCIe controller" ++ depends on ARCH_ZYNQMP || COMPILE_TEST ++ depends on OF ++ select PCIE_MOBIVEIL_HOST ++ help ++ Say Y here if you want to enable support for the Mobiveil AXI PCIe ++ Soft IP. It has up to 8 outbound and inbound windows ++ for address translation and it is a PCIe Gen4 IP. ++ ++config PCI_LAYERSCAPE_GEN4 ++ bool "Freescale Layerscpe PCIe Gen4 controller in RC mode" ++ depends on PCI ++ depends on OF && (ARM64 || ARCH_LAYERSCAPE) ++ depends on PCI_MSI_IRQ_DOMAIN ++ select PCIE_MOBIVEIL_HOST ++ help ++ Say Y here if you want PCIe Gen4 controller support on ++ Layerscape SoCs. And the PCIe controller work in RC mode ++ by setting the RCW[HOST_AGT_PEX] to 0. ++ ++config PCI_LAYERSCAPE_GEN4_EP ++ bool "Freescale Layerscpe PCIe Gen4 controller in EP mode" ++ depends on PCI ++ depends on OF && (ARM64 || ARCH_LAYERSCAPE) ++ depends on PCI_ENDPOINT ++ select PCIE_MOBIVEIL_EP ++ help ++ Say Y here if you want PCIe Gen4 controller support on ++ Layerscape SoCs. And the PCIe controller work in EP mode ++ by setting the RCW[HOST_AGT_PEX] to 1. ++endmenu +--- /dev/null ++++ b/drivers/pci/mobiveil/Makefile +@@ -0,0 +1,7 @@ ++# SPDX-License-Identifier: GPL-2.0 ++obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o ++obj-$(CONFIG_PCIE_MOBIVEIL_HOST) += pcie-mobiveil-host.o ++obj-$(CONFIG_PCIE_MOBIVEIL_EP) += pcie-mobiveil-ep.o ++obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o ++obj-$(CONFIG_PCI_LAYERSCAPE_GEN4) += pci-layerscape-gen4.o ++obj-$(CONFIG_PCI_LAYERSCAPE_GEN4_EP) += pci-layerscape-gen4-ep.o +--- /dev/null ++++ b/drivers/pci/mobiveil/pci-layerscape-gen4-ep.c +@@ -0,0 +1,178 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * PCIe controller EP driver for Freescale Layerscape SoCs ++ * ++ * Copyright (C) 2018 NXP Semiconductor. ++ * ++ * Author: Xiaowei Bao ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-mobiveil.h" ++ ++struct ls_pcie_g4_ep { ++ struct mobiveil_pcie *mv_pci; ++}; ++ ++#define to_ls_pcie_g4_ep(x) dev_get_drvdata((x)->dev) ++ ++static const struct of_device_id ls_pcie_g4_ep_of_match[] = { ++ { .compatible = "fsl,lx2160a-pcie-ep",}, ++ { }, ++}; ++ ++static void ls_pcie_g4_get_bar_num(struct mobiveil_pcie_ep *ep) ++{ ++ struct mobiveil_pcie *mv_pci = to_mobiveil_pcie_from_ep(ep); ++ u32 type, reg; ++ u8 bar; ++ ++ ep->bar_num = BAR_5 + 1; ++ ++ for (bar = BAR_0; bar <= BAR_5; bar++) { ++ reg = PCI_BASE_ADDRESS_0 + (4 * bar); ++ type = csr_readl(mv_pci, reg) & ++ PCI_BASE_ADDRESS_MEM_TYPE_MASK; ++ if (type & PCI_BASE_ADDRESS_MEM_TYPE_64) ++ ep->bar_num--; ++ } ++} ++ ++static void ls_pcie_g4_ep_init(struct mobiveil_pcie_ep *ep) ++{ ++ struct mobiveil_pcie *mv_pci = to_mobiveil_pcie_from_ep(ep); ++ struct pci_epc *epc = ep->epc; ++ enum pci_barno bar; ++ int win_idx, val; ++ ++ /* ++ * Errata: unsupported request error on inbound posted write ++ * transaction, PCIe controller reports advisory error instead ++ * of uncorrectable error message to RC. ++ * workaround: set the bit20(unsupported_request_Error_severity) with ++ * value 1 in uncorrectable_Error_Severity_Register, make the ++ * unsupported request error generate the fatal error. ++ */ ++ val = csr_readl(mv_pci, CFG_UNCORRECTABLE_ERROR_SEVERITY); ++ val |= 1 << UNSUPPORTED_REQUEST_ERROR_SHIFT; ++ csr_writel(mv_pci, val, CFG_UNCORRECTABLE_ERROR_SEVERITY); ++ ++ ls_pcie_g4_get_bar_num(ep); ++ ++ for (bar = BAR_0; bar < (ep->bar_num * ep->pf_num); bar++) ++ mobiveil_pcie_ep_reset_bar(mv_pci, bar); ++ ++ for (win_idx = 0; win_idx < MAX_IATU_OUT; win_idx++) ++ mobiveil_pcie_disable_ob_win(mv_pci, win_idx); ++ ++ epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER; ++ epc->features |= EPC_FEATURE_MSIX_AVAILABLE; ++} ++ ++static int ls_pcie_g4_ep_raise_irq(struct mobiveil_pcie_ep *ep, u8 func_no, ++ enum pci_epc_irq_type type, ++ u16 interrupt_num) ++{ ++ struct mobiveil_pcie *mv_pci = to_mobiveil_pcie_from_ep(ep); ++ ++ switch (type) { ++ case PCI_EPC_IRQ_LEGACY: ++ return mobiveil_pcie_ep_raise_legacy_irq(ep, func_no); ++ case PCI_EPC_IRQ_MSI: ++ return mobiveil_pcie_ep_raise_msi_irq(ep, func_no, ++ interrupt_num); ++ case PCI_EPC_IRQ_MSIX: ++ return mobiveil_pcie_ep_raise_msix_irq(ep, func_no, ++ interrupt_num); ++ default: ++ dev_err(&mv_pci->pdev->dev, "UNKNOWN IRQ type\n"); ++ } ++ ++ return 0; ++} ++ ++static struct mobiveil_pcie_ep_ops pcie_ep_ops = { ++ .ep_init = ls_pcie_g4_ep_init, ++ .raise_irq = ls_pcie_g4_ep_raise_irq, ++}; ++ ++static int __init ls_pcie_gen4_add_pcie_ep(struct ls_pcie_g4_ep *ls_pcie_g4_ep, ++ struct platform_device *pdev) ++{ ++ struct mobiveil_pcie *mv_pci = ls_pcie_g4_ep->mv_pci; ++ struct device *dev = &pdev->dev; ++ struct mobiveil_pcie_ep *ep; ++ struct resource *res; ++ int ret; ++ struct device_node *np = dev->of_node; ++ ++ ep = &mv_pci->ep; ++ ep->ops = &pcie_ep_ops; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); ++ if (!res) ++ return -EINVAL; ++ ++ ep->phys_base = res->start; ++ ep->addr_size = resource_size(res); ++ ++ ret = of_property_read_u32(np, "max-functions", &ep->pf_num); ++ if (ret < 0) ++ ep->pf_num = 1; ++ ++ ret = mobiveil_pcie_ep_init(ep); ++ if (ret) { ++ dev_err(dev, "failed to initialize endpoint\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int __init ls_pcie_g4_ep_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct mobiveil_pcie *mv_pci; ++ struct ls_pcie_g4_ep *ls_pcie_g4_ep; ++ struct resource *res; ++ int ret; ++ ++ ls_pcie_g4_ep = devm_kzalloc(dev, sizeof(*ls_pcie_g4_ep), GFP_KERNEL); ++ if (!ls_pcie_g4_ep) ++ return -ENOMEM; ++ ++ mv_pci = devm_kzalloc(dev, sizeof(*mv_pci), GFP_KERNEL); ++ if (!mv_pci) ++ return -ENOMEM; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); ++ mv_pci->csr_axi_slave_base = devm_pci_remap_cfg_resource(dev, res); ++ if (IS_ERR(mv_pci->csr_axi_slave_base)) ++ return PTR_ERR(mv_pci->csr_axi_slave_base); ++ ++ mv_pci->pdev = pdev; ++ ls_pcie_g4_ep->mv_pci = mv_pci; ++ ++ platform_set_drvdata(pdev, ls_pcie_g4_ep); ++ ++ ret = ls_pcie_gen4_add_pcie_ep(ls_pcie_g4_ep, pdev); ++ ++ return ret; ++} ++ ++static struct platform_driver ls_pcie_g4_ep_driver = { ++ .driver = { ++ .name = "layerscape-pcie-gen4-ep", ++ .of_match_table = ls_pcie_g4_ep_of_match, ++ .suppress_bind_attrs = true, ++ }, ++}; ++builtin_platform_driver_probe(ls_pcie_g4_ep_driver, ls_pcie_g4_ep_probe); +--- /dev/null ++++ b/drivers/pci/mobiveil/pci-layerscape-gen4.c +@@ -0,0 +1,292 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * PCIe host controller driver for NXP Layerscape SoCs ++ * ++ * Copyright 2018 NXP ++ * ++ * Author: Zhiqiang Hou ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-mobiveil.h" ++ ++/* LUT and PF control registers */ ++#define PCIE_LUT_OFF (0x80000) ++#define PCIE_LUT_GCR (0x28) ++#define PCIE_LUT_GCR_RRE (0) ++ ++#define PCIE_PF_OFF (0xc0000) ++#define PCIE_PF_INT_STAT (0x18) ++#define PF_INT_STAT_PABRST (31) ++ ++#define PCIE_PF_DBG (0x7fc) ++#define PF_DBG_LTSSM_MASK (0x3f) ++#define PF_DBG_WE (31) ++#define PF_DBG_PABR (27) ++ ++#define LS_PCIE_G4_LTSSM_L0 0x2d /* L0 state */ ++ ++#define to_ls_pcie_g4(x) platform_get_drvdata((x)->pdev) ++ ++struct ls_pcie_g4 { ++ struct mobiveil_pcie *pci; ++ struct delayed_work dwork; ++ int irq; ++}; ++ ++static inline u32 ls_pcie_g4_lut_readl(struct ls_pcie_g4 *pcie, u32 off) ++{ ++ return ioread32(pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off); ++} ++ ++static inline void ls_pcie_g4_lut_writel(struct ls_pcie_g4 *pcie, ++ u32 off, u32 val) ++{ ++ iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_LUT_OFF + off); ++} ++ ++static inline u32 ls_pcie_g4_pf_readl(struct ls_pcie_g4 *pcie, u32 off) ++{ ++ return ioread32(pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off); ++} ++ ++static inline void ls_pcie_g4_pf_writel(struct ls_pcie_g4 *pcie, ++ u32 off, u32 val) ++{ ++ iowrite32(val, pcie->pci->csr_axi_slave_base + PCIE_PF_OFF + off); ++} ++ ++static bool ls_pcie_g4_is_bridge(struct ls_pcie_g4 *pcie) ++{ ++ struct mobiveil_pcie *mv_pci = pcie->pci; ++ u32 header_type; ++ ++ header_type = csr_readb(mv_pci, PCI_HEADER_TYPE); ++ header_type &= 0x7f; ++ ++ return header_type == PCI_HEADER_TYPE_BRIDGE; ++} ++ ++static int ls_pcie_g4_link_up(struct mobiveil_pcie *pci) ++{ ++ struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci); ++ u32 state; ++ ++ state = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG); ++ state = state & PF_DBG_LTSSM_MASK; ++ ++ if (state == LS_PCIE_G4_LTSSM_L0) ++ return 1; ++ ++ return 0; ++} ++ ++static void ls_pcie_g4_reinit_hw(struct ls_pcie_g4 *pcie) ++{ ++ struct mobiveil_pcie *mv_pci = pcie->pci; ++ u32 val, act_stat; ++ int to = 100; ++ ++ /* Poll for pab_csb_reset to set and PAB activity to clear */ ++ do { ++ usleep_range(10, 15); ++ val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_INT_STAT); ++ act_stat = csr_readl(mv_pci, PAB_ACTIVITY_STAT); ++ } while (((val & 1 << PF_INT_STAT_PABRST) == 0 || act_stat) && to--); ++ if (to < 0) { ++ dev_err(&mv_pci->pdev->dev, "poll PABRST&PABACT timeout\n"); ++ return; ++ } ++ ++ /* clear PEX_RESET bit in PEX_PF0_DBG register */ ++ val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG); ++ val |= 1 << PF_DBG_WE; ++ ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val); ++ ++ val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG); ++ val |= 1 << PF_DBG_PABR; ++ ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val); ++ ++ val = ls_pcie_g4_pf_readl(pcie, PCIE_PF_DBG); ++ val &= ~(1 << PF_DBG_WE); ++ ls_pcie_g4_pf_writel(pcie, PCIE_PF_DBG, val); ++ ++ mobiveil_host_init(mv_pci, true); ++ ++ to = 100; ++ while (!ls_pcie_g4_link_up(mv_pci) && to--) ++ usleep_range(200, 250); ++ if (to < 0) ++ dev_err(&mv_pci->pdev->dev, "PCIe link trainning timeout\n"); ++} ++ ++static irqreturn_t ls_pcie_g4_handler(int irq, void *dev_id) ++{ ++ struct ls_pcie_g4 *pcie = (struct ls_pcie_g4 *)dev_id; ++ struct mobiveil_pcie *mv_pci = pcie->pci; ++ u32 val; ++ ++ val = csr_readl(mv_pci, PAB_INTP_AMBA_MISC_STAT); ++ if (!val) ++ return IRQ_NONE; ++ ++ if (val & PAB_INTP_RESET) ++ schedule_delayed_work(&pcie->dwork, msecs_to_jiffies(1)); ++ ++ csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_STAT); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ls_pcie_g4_interrupt_init(struct mobiveil_pcie *mv_pci) ++{ ++ struct ls_pcie_g4 *pcie = to_ls_pcie_g4(mv_pci); ++ u32 val; ++ int ret; ++ ++ pcie->irq = platform_get_irq_byname(mv_pci->pdev, "intr"); ++ if (pcie->irq < 0) { ++ dev_err(&mv_pci->pdev->dev, "Can't get 'intr' irq.\n"); ++ return pcie->irq; ++ } ++ ret = devm_request_irq(&mv_pci->pdev->dev, pcie->irq, ++ ls_pcie_g4_handler, IRQF_SHARED, ++ mv_pci->pdev->name, pcie); ++ if (ret) { ++ dev_err(&mv_pci->pdev->dev, "Can't register PCIe IRQ.\n"); ++ return ret; ++ } ++ ++ /* Enable interrupts */ ++ val = PAB_INTP_INTX_MASK | PAB_INTP_MSI | PAB_INTP_RESET | ++ PAB_INTP_PCIE_UE | PAB_INTP_IE_PMREDI | PAB_INTP_IE_EC; ++ csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_ENB); ++ ++ return 0; ++} ++ ++static void ls_pcie_g4_reset(struct work_struct *work) ++{ ++ struct delayed_work *dwork = container_of(work, struct delayed_work, ++ work); ++ struct ls_pcie_g4 *pcie = container_of(dwork, struct ls_pcie_g4, dwork); ++ struct mobiveil_pcie *mv_pci = pcie->pci; ++ u16 ctrl; ++ ++ ctrl = csr_readw(mv_pci, PCI_BRIDGE_CONTROL); ++ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; ++ csr_writew(mv_pci, ctrl, PCI_BRIDGE_CONTROL); ++ ls_pcie_g4_reinit_hw(pcie); ++} ++ ++static int ls_pcie_g4_read_other_conf(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *val) ++{ ++ struct mobiveil_pcie *pci = bus->sysdata; ++ struct ls_pcie_g4 *pcie = to_ls_pcie_g4(pci); ++ int ret; ++ ++ if (where == PCI_VENDOR_ID) ++ ls_pcie_g4_lut_writel(pcie, PCIE_LUT_GCR, ++ 0 << PCIE_LUT_GCR_RRE); ++ ++ ret = pci_generic_config_read(bus, devfn, where, size, val); ++ ++ if (where == PCI_VENDOR_ID) ++ ls_pcie_g4_lut_writel(pcie, PCIE_LUT_GCR, ++ 1 << PCIE_LUT_GCR_RRE); ++ ++ return ret; ++} ++ ++static struct mobiveil_rp_ops ls_pcie_g4_rp_ops = { ++ .interrupt_init = ls_pcie_g4_interrupt_init, ++ .read_other_conf = ls_pcie_g4_read_other_conf, ++}; ++ ++static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = { ++ .link_up = ls_pcie_g4_link_up, ++}; ++ ++static void workaround_tkt381274(struct ls_pcie_g4 *pcie) ++{ ++ struct mobiveil_pcie *mv_pci = pcie->pci; ++ u32 val; ++ ++ /* Set ACK latency timeout */ ++ val = csr_readl(mv_pci, GPEX_ACK_REPLAY_TO); ++ val &= ~(ACK_LAT_TO_VAL_MASK << ACK_LAT_TO_VAL_SHIFT); ++ val |= (4 << ACK_LAT_TO_VAL_SHIFT); ++ csr_writel(mv_pci, val, GPEX_ACK_REPLAY_TO); ++} ++ ++static int __init ls_pcie_g4_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct mobiveil_pcie *mv_pci; ++ struct ls_pcie_g4 *pcie; ++ struct device_node *np = dev->of_node; ++ int ret; ++ ++ if (!of_parse_phandle(np, "msi-parent", 0)) { ++ dev_err(dev, "failed to find msi-parent\n"); ++ return -EINVAL; ++ } ++ ++ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); ++ if (!pcie) ++ return -ENOMEM; ++ ++ mv_pci = devm_kzalloc(dev, sizeof(*mv_pci), GFP_KERNEL); ++ if (!mv_pci) ++ return -ENOMEM; ++ ++ mv_pci->pdev = pdev; ++ mv_pci->ops = &ls_pcie_g4_pab_ops; ++ mv_pci->rp.ops = &ls_pcie_g4_rp_ops; ++ pcie->pci = mv_pci; ++ ++ platform_set_drvdata(pdev, pcie); ++ ++ INIT_DELAYED_WORK(&pcie->dwork, ls_pcie_g4_reset); ++ ++ ret = mobiveil_pcie_host_probe(mv_pci); ++ if (ret) { ++ dev_err(dev, "fail to probe!\n"); ++ return ret; ++ } ++ ++ if (!ls_pcie_g4_is_bridge(pcie)) ++ return -ENODEV; ++ ++ workaround_tkt381274(pcie); ++ ++ return 0; ++} ++ ++static const struct of_device_id ls_pcie_g4_of_match[] = { ++ { .compatible = "fsl,lx2160a-pcie", }, ++ { }, ++}; ++ ++static struct platform_driver ls_pcie_g4_driver = { ++ .driver = { ++ .name = "layerscape-pcie-gen4", ++ .of_match_table = ls_pcie_g4_of_match, ++ .suppress_bind_attrs = true, ++ }, ++}; ++ ++builtin_platform_driver_probe(ls_pcie_g4_driver, ls_pcie_g4_probe); +--- /dev/null ++++ b/drivers/pci/mobiveil/pcie-mobiveil-ep.c +@@ -0,0 +1,512 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/** ++ * Mobiveil PCIe Endpoint controller driver ++ * ++ * Copyright (C) 2018 NXP Semiconductor. ++ * Author: Xiaowei Bao ++ */ ++ ++#include ++#include ++#include ++#include ++#include "pcie-mobiveil.h" ++ ++void mobiveil_pcie_ep_linkup(struct mobiveil_pcie_ep *ep) ++{ ++ struct pci_epc *epc = ep->epc; ++ ++ pci_epc_linkup(epc); ++} ++ ++static void __mobiveil_pcie_ep_reset_bar(struct mobiveil_pcie *pcie, ++ enum pci_barno bar) ++{ ++ csr_writel(pcie, bar, GPEX_BAR_SELECT); ++ csr_writel(pcie, 0, GPEX_BAR_SIZE_LDW); ++ csr_writel(pcie, 0, GPEX_BAR_SIZE_UDW); ++} ++ ++void mobiveil_pcie_ep_reset_bar(struct mobiveil_pcie *pcie, ++ enum pci_barno bar) ++{ ++ __mobiveil_pcie_ep_reset_bar(pcie, bar); ++} ++ ++static u8 __mobiveil_pcie_ep_find_next_cap(struct mobiveil_pcie *pcie, ++ u8 cap_ptr, u8 cap) ++{ ++ u8 cap_id, next_cap_ptr; ++ u16 reg; ++ ++ reg = csr_readw(pcie, cap_ptr); ++ next_cap_ptr = (reg & 0xff00) >> 8; ++ cap_id = (reg & 0x00ff); ++ ++ if (cap_id == cap) ++ return cap_ptr; ++ ++ if (!next_cap_ptr || cap_id > PCI_CAP_ID_MAX) ++ return 0; ++ ++ return __mobiveil_pcie_ep_find_next_cap(pcie, next_cap_ptr, cap); ++} ++ ++static u8 mobiveil_pcie_ep_find_capability(struct mobiveil_pcie *pcie, ++ u8 cap) ++{ ++ u8 next_cap_ptr; ++ u16 reg; ++ ++ reg = csr_readw(pcie, PCI_CAPABILITY_LIST); ++ next_cap_ptr = (reg & 0x00ff); ++ ++ if (!next_cap_ptr) ++ return 0; ++ ++ return __mobiveil_pcie_ep_find_next_cap(pcie, next_cap_ptr, cap); ++} ++ ++static int mobiveil_pcie_ep_write_header(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_header *hdr) ++{ ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ ++ csr_writew(pcie, hdr->vendorid, PCI_VENDOR_ID); ++ csr_writew(pcie, hdr->deviceid, PCI_DEVICE_ID); ++ csr_writeb(pcie, hdr->revid, PCI_REVISION_ID); ++ csr_writeb(pcie, hdr->progif_code, PCI_CLASS_PROG); ++ csr_writew(pcie, hdr->subclass_code | hdr->baseclass_code << 8, ++ PCI_CLASS_DEVICE); ++ csr_writeb(pcie, hdr->cache_line_size, PCI_CACHE_LINE_SIZE); ++ csr_writew(pcie, hdr->subsys_vendor_id, PCI_SUBSYSTEM_VENDOR_ID); ++ csr_writew(pcie, hdr->subsys_id, PCI_SUBSYSTEM_ID); ++ csr_writeb(pcie, hdr->interrupt_pin, PCI_INTERRUPT_PIN); ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_ep_inbound_atu(struct mobiveil_pcie_ep *ep, ++ u8 func_no, enum pci_barno bar, ++ dma_addr_t cpu_addr) ++{ ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ ++ program_ib_windows_ep(pcie, func_no, bar, cpu_addr); ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_ep_outbound_atu(struct mobiveil_pcie_ep *ep, ++ phys_addr_t phys_addr, ++ u64 pci_addr, u8 func_no, ++ size_t size) ++{ ++ int ret; ++ u32 free_win; ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ ++ free_win = find_first_zero_bit(ep->ob_window_map, ep->num_ob_windows); ++ if (free_win >= ep->num_ob_windows) { ++ dev_err(&pcie->pdev->dev, "No free outbound window\n"); ++ return -EINVAL; ++ } ++ ++ ret = program_ob_windows_ep(pcie, free_win, MEM_WINDOW_TYPE, ++ phys_addr, pci_addr, func_no, size); ++ if (ret < 0) { ++ dev_err(&pcie->pdev->dev, "Failed to program IB window\n"); ++ return ret; ++ } ++ ++ set_bit(free_win, ep->ob_window_map); ++ ep->outbound_addr[free_win] = phys_addr; ++ ++ return 0; ++} ++ ++static void mobiveil_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar) ++{ ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ enum pci_barno bar = epf_bar->barno; ++ ++ if (bar < ep->bar_num) { ++ __mobiveil_pcie_ep_reset_bar(pcie, ++ func_no * ep->bar_num + bar); ++ ++ mobiveil_pcie_disable_ib_win_ep(pcie, func_no, bar); ++ } ++} ++ ++static int mobiveil_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar) ++{ ++ int ret; ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ enum pci_barno bar = epf_bar->barno; ++ size_t size = epf_bar->size; ++ ++ if (bar < ep->bar_num) { ++ ret = mobiveil_pcie_ep_inbound_atu(ep, func_no, bar, ++ epf_bar->phys_addr); ++ if (ret) ++ return ret; ++ ++ csr_writel(pcie, func_no * ep->bar_num + bar, ++ GPEX_BAR_SELECT); ++ csr_writel(pcie, lower_32_bits(~(size - 1)), ++ GPEX_BAR_SIZE_LDW); ++ csr_writel(pcie, upper_32_bits(~(size - 1)), ++ GPEX_BAR_SIZE_UDW); ++ } ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_find_index(struct mobiveil_pcie_ep *ep, ++ phys_addr_t addr, ++ u32 *atu_index) ++{ ++ u32 index; ++ ++ for (index = 0; index < ep->num_ob_windows; index++) { ++ if (ep->outbound_addr[index] != addr) ++ continue; ++ *atu_index = index; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static void mobiveil_pcie_ep_unmap_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t addr) ++{ ++ int ret; ++ u32 atu_index; ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ ++ ret = mobiveil_pcie_find_index(ep, addr, &atu_index); ++ if (ret < 0) ++ return; ++ ++ mobiveil_pcie_disable_ob_win(pcie, atu_index); ++ clear_bit(atu_index, ep->ob_window_map); ++} ++ ++static int mobiveil_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t addr, ++ u64 pci_addr, size_t size) ++{ ++ int ret; ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ ++ ret = mobiveil_pcie_ep_outbound_atu(ep, addr, pci_addr, func_no, size); ++ if (ret) { ++ dev_err(&pcie->pdev->dev, "Failed to enable address\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no) ++{ ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msi_cap) ++ return -EINVAL; ++ ++ reg = ep->msi_cap + PCI_MSI_FLAGS; ++ val = csr_readw(pcie, reg); ++ if (!(val & PCI_MSI_FLAGS_ENABLE)) ++ return -EINVAL; ++ ++ val = (val & PCI_MSI_FLAGS_QSIZE) >> 4; ++ ++ return val; ++} ++ ++static int mobiveil_pcie_ep_set_msi(struct pci_epc *epc, ++ u8 func_no, u8 interrupts) ++{ ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msi_cap) ++ return -EINVAL; ++ ++ reg = ep->msi_cap + PCI_MSI_FLAGS; ++ val = csr_readw(pcie, reg); ++ val &= ~PCI_MSI_FLAGS_QMASK; ++ val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; ++ csr_writew(pcie, val, reg); ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no) ++{ ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msix_cap) ++ return -EINVAL; ++ ++ reg = ep->msix_cap + PCI_MSIX_FLAGS; ++ val = csr_readw(pcie, reg); ++ if (!(val & PCI_MSIX_FLAGS_ENABLE)) ++ return -EINVAL; ++ ++ val &= PCI_MSIX_FLAGS_QSIZE; ++ ++ return val; ++} ++ ++static int mobiveil_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, ++ u16 interrupts) ++{ ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ u32 val, reg; ++ ++ if (!ep->msix_cap) ++ return -EINVAL; ++ ++ reg = ep->msix_cap + PCI_MSIX_FLAGS; ++ val = csr_readw(pcie, reg); ++ val &= ~PCI_MSIX_FLAGS_QSIZE; ++ val |= interrupts; ++ csr_writew(pcie, val, reg); ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_ep_raise_irq(struct pci_epc *epc, u8 func_no, ++ enum pci_epc_irq_type type, ++ u16 interrupt_num) ++{ ++ struct mobiveil_pcie_ep *ep = epc_get_drvdata(epc); ++ ++ if (!ep->ops->raise_irq) ++ return -EINVAL; ++ ++ return ep->ops->raise_irq(ep, func_no, type, interrupt_num); ++} ++ ++static const struct pci_epc_ops epc_ops = { ++ .write_header = mobiveil_pcie_ep_write_header, ++ .set_bar = mobiveil_pcie_ep_set_bar, ++ .clear_bar = mobiveil_pcie_ep_clear_bar, ++ .map_addr = mobiveil_pcie_ep_map_addr, ++ .unmap_addr = mobiveil_pcie_ep_unmap_addr, ++ .set_msi = mobiveil_pcie_ep_set_msi, ++ .get_msi = mobiveil_pcie_ep_get_msi, ++ .set_msix = mobiveil_pcie_ep_set_msix, ++ .get_msix = mobiveil_pcie_ep_get_msix, ++ .raise_irq = mobiveil_pcie_ep_raise_irq, ++}; ++ ++int mobiveil_pcie_ep_raise_legacy_irq(struct mobiveil_pcie_ep *ep, u8 func_no) ++{ ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ ++ dev_err(&pcie->pdev->dev, "EP cannot trigger legacy IRQs\n"); ++ ++ return -EINVAL; ++} ++ ++int mobiveil_pcie_ep_raise_msi_irq(struct mobiveil_pcie_ep *ep, u8 func_no, ++ u8 interrupt_num) ++{ ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ struct pci_epc *epc = ep->epc; ++ u16 msg_ctrl, msg_data; ++ u32 msg_addr_lower, msg_addr_upper, reg; ++ u64 msg_addr; ++ u32 func_num; ++ bool has_upper; ++ int ret; ++ ++ if (!ep->msi_cap) ++ return -EINVAL; ++ ++ func_num = csr_readl(pcie, PAB_CTRL); ++ func_num &= ~(FUNC_SEL_MASK << FUNC_SEL_SHIFT); ++ func_num |= (func_no & FUNC_SEL_MASK) << FUNC_SEL_SHIFT; ++ csr_writel(pcie, func_num, PAB_CTRL); ++ ++ /* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */ ++ reg = ep->msi_cap + PCI_MSI_FLAGS; ++ msg_ctrl = csr_readw(pcie, reg); ++ has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT); ++ reg = ep->msi_cap + PCI_MSI_ADDRESS_LO; ++ msg_addr_lower = csr_readl(pcie, reg); ++ if (has_upper) { ++ reg = ep->msi_cap + PCI_MSI_ADDRESS_HI; ++ msg_addr_upper = csr_readl(pcie, reg); ++ reg = ep->msi_cap + PCI_MSI_DATA_64; ++ msg_data = csr_readw(pcie, reg); ++ } else { ++ msg_addr_upper = 0; ++ reg = ep->msi_cap + PCI_MSI_DATA_32; ++ msg_data = csr_readw(pcie, reg); ++ } ++ msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower; ++ ++ func_num = csr_readl(pcie, PAB_CTRL); ++ func_num &= ~(FUNC_SEL_MASK << FUNC_SEL_SHIFT); ++ csr_writel(pcie, func_num, PAB_CTRL); ++ ++ ret = mobiveil_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, ++ msg_addr, epc->mem->page_size); ++ if (ret) ++ return ret; ++ ++ writel(msg_data | (interrupt_num - 1), ep->msi_mem); ++ ++ mobiveil_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys); ++ ++ return 0; ++} ++ ++int mobiveil_pcie_ep_raise_msix_irq(struct mobiveil_pcie_ep *ep, u8 func_no, ++ u16 interrupt_num) ++{ ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ struct pci_epc *epc = ep->epc; ++ u32 msg_addr_upper, msg_addr_lower; ++ u32 msg_data; ++ u64 msg_addr; ++ u32 func_num; ++ int ret; ++ ++ func_num = csr_readl(pcie, PAB_CTRL); ++ func_num &= ~(FUNC_SEL_MASK << FUNC_SEL_SHIFT); ++ func_num |= (func_no & FUNC_SEL_MASK) << FUNC_SEL_SHIFT; ++ csr_writel(pcie, func_num, PAB_CTRL); ++ ++ msg_addr_lower = csr_readl(pcie, PAB_MSIX_TABLE_PBA_ACCESS + ++ PCI_MSIX_ENTRY_LOWER_ADDR + ++ (interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE); ++ msg_addr_upper = csr_readl(pcie, PAB_MSIX_TABLE_PBA_ACCESS + ++ PCI_MSIX_ENTRY_UPPER_ADDR + ++ (interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE); ++ msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower; ++ msg_data = csr_readl(pcie, PAB_MSIX_TABLE_PBA_ACCESS + ++ PCI_MSIX_ENTRY_DATA + ++ (interrupt_num - 1) * PCI_MSIX_ENTRY_SIZE); ++ ++ func_num = csr_readl(pcie, PAB_CTRL); ++ func_num &= ~(FUNC_SEL_MASK << FUNC_SEL_SHIFT); ++ csr_writel(pcie, func_num, PAB_CTRL); ++ ++ ret = mobiveil_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, ++ msg_addr, epc->mem->page_size); ++ if (ret) ++ return ret; ++ ++ writel(msg_data, ep->msi_mem); ++ ++ mobiveil_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys); ++ ++ return 0; ++} ++ ++void mobiveil_pcie_ep_exit(struct mobiveil_pcie_ep *ep) ++{ ++ struct pci_epc *epc = ep->epc; ++ ++ pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, ++ epc->mem->page_size); ++ ++ pci_epc_mem_exit(epc); ++} ++ ++int mobiveil_pcie_ep_init(struct mobiveil_pcie_ep *ep) ++{ ++ int ret; ++ void *addr; ++ struct pci_epc *epc; ++ struct mobiveil_pcie *pcie = to_mobiveil_pcie_from_ep(ep); ++ struct device *dev = &pcie->pdev->dev; ++ struct device_node *np = dev->of_node; ++ ++ if (!pcie->csr_axi_slave_base) { ++ dev_err(dev, "csr_base is not populated\n"); ++ return -EINVAL; ++ } ++ ++ ret = of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows); ++ if (ret < 0) { ++ dev_err(dev, "Unable to read *num-ob-windows* property\n"); ++ return ret; ++ } ++ ++ if (ep->num_ob_windows > MAX_IATU_OUT) { ++ dev_err(dev, "Invalid *num-ob-windows*\n"); ++ return -EINVAL; ++ } ++ ep->ob_window_map = devm_kcalloc(dev, ++ BITS_TO_LONGS(ep->num_ob_windows), ++ sizeof(long), ++ GFP_KERNEL); ++ if (!ep->ob_window_map) ++ return -ENOMEM; ++ ++ addr = devm_kcalloc(dev, ep->num_ob_windows, sizeof(phys_addr_t), ++ GFP_KERNEL); ++ if (!addr) ++ return -ENOMEM; ++ ep->outbound_addr = addr; ++ ++ mobiveil_pcie_enable_bridge_pio(pcie); ++ mobiveil_pcie_enable_engine_apio(pcie); ++ mobiveil_pcie_enable_engine_ppio(pcie); ++ mobiveil_pcie_enable_msi_ep(pcie); ++ ++ epc = devm_pci_epc_create(dev, &epc_ops); ++ if (IS_ERR(epc)) { ++ dev_err(dev, "Failed to create epc device\n"); ++ return PTR_ERR(epc); ++ } ++ ++ ep->epc = epc; ++ epc_set_drvdata(epc, ep); ++ ++ ep->msi_cap = mobiveil_pcie_ep_find_capability(pcie, PCI_CAP_ID_MSI); ++ ++ ep->msix_cap = mobiveil_pcie_ep_find_capability(pcie, ++ PCI_CAP_ID_MSIX); ++ ++ if (ep->ops->ep_init) ++ ep->ops->ep_init(ep); ++ ++ epc->max_functions = ep->pf_num; ++ ++ ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size, ++ ep->page_size); ++ if (ret < 0) { ++ dev_err(dev, "Failed to initialize address space\n"); ++ return ret; ++ } ++ ++ ep->msi_mem = pci_epc_mem_alloc_addr(epc, &ep->msi_mem_phys, ++ epc->mem->page_size); ++ if (!ep->msi_mem) { ++ dev_err(dev, "Failed to reserve memory for MSI/MSI-X\n"); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/pci/mobiveil/pcie-mobiveil-host.c +@@ -0,0 +1,640 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * PCIe host controller driver for Mobiveil PCIe Host controller ++ * ++ * Copyright (c) 2018 Mobiveil Inc. ++ * Author: Subrahmanya Lingappa ++ * Refactor: Zhiqiang Hou ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-mobiveil.h" ++ ++static bool mobiveil_pcie_valid_device(struct pci_bus *bus, unsigned int devfn) ++{ ++ struct mobiveil_pcie *pcie = bus->sysdata; ++ ++ /* If there is no link, then there is no device */ ++ if (bus->number > pcie->rp.root_bus_nr && !mobiveil_pcie_link_up(pcie)) ++ return false; ++ ++ /* Only one device down on each root port */ ++ if ((bus->number == pcie->rp.root_bus_nr) && (devfn > 0)) ++ return false; ++ ++ /* ++ * Do not read more than one device on the bus directly ++ * attached to RC ++ */ ++ if ((bus->primary == pcie->rp.root_bus_nr) && (PCI_SLOT(devfn) > 0)) ++ return false; ++ ++ return true; ++} ++ ++/* ++ * mobiveil_pcie_map_bus - routine to get the configuration base of either ++ * root port or endpoint ++ */ ++static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus, ++ unsigned int devfn, int where) ++{ ++ struct mobiveil_pcie *pcie = bus->sysdata; ++ u32 value; ++ ++ if (!mobiveil_pcie_valid_device(bus, devfn)) ++ return NULL; ++ ++ /* RC config access */ ++ if (bus->number == pcie->rp.root_bus_nr) ++ return pcie->csr_axi_slave_base + where; ++ ++ /* ++ * EP config access (in Config/APIO space) ++ * Program PEX Address base (31..16 bits) with appropriate value ++ * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register. ++ * Relies on pci_lock serialization ++ */ ++ value = bus->number << PAB_BUS_SHIFT | ++ PCI_SLOT(devfn) << PAB_DEVICE_SHIFT | ++ PCI_FUNC(devfn) << PAB_FUNCTION_SHIFT; ++ ++ csr_writel(pcie, value, PAB_AXI_AMAP_PEX_WIN_L(WIN_NUM_0)); ++ ++ return pcie->rp.config_axi_slave_base + where; ++} ++ ++static int mobiveil_pcie_config_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *val) ++{ ++ struct mobiveil_pcie *pcie = bus->sysdata; ++ struct root_port *rp = &pcie->rp; ++ ++ if (bus->number > rp->root_bus_nr && rp->ops->read_other_conf) ++ return rp->ops->read_other_conf(bus, devfn, where, size, val); ++ ++ return pci_generic_config_read(bus, devfn, where, size, val); ++} ++static struct pci_ops mobiveil_pcie_ops = { ++ .map_bus = mobiveil_pcie_map_bus, ++ .read = mobiveil_pcie_config_read, ++ .write = pci_generic_config_write, ++}; ++ ++static void mobiveil_pcie_isr(struct irq_desc *desc) ++{ ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct mobiveil_pcie *pcie = irq_desc_get_handler_data(desc); ++ struct device *dev = &pcie->pdev->dev; ++ struct mobiveil_msi *msi = &pcie->rp.msi; ++ u32 msi_data, msi_addr_lo, msi_addr_hi; ++ u32 intr_status, msi_status; ++ unsigned long shifted_status; ++ u32 bit, virq, val, mask; ++ ++ /* ++ * The core provides a single interrupt for both INTx/MSI messages. ++ * So we'll read both INTx and MSI status ++ */ ++ ++ chained_irq_enter(chip, desc); ++ ++ /* read INTx status */ ++ val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); ++ mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); ++ intr_status = val & mask; ++ ++ /* Handle INTx */ ++ if (intr_status & PAB_INTP_INTX_MASK) { ++ shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); ++ shifted_status &= PAB_INTP_INTX_MASK; ++ shifted_status >>= PAB_INTX_START; ++ do { ++ for_each_set_bit(bit, &shifted_status, PCI_NUM_INTX) { ++ virq = irq_find_mapping(pcie->rp.intx_domain, ++ bit + 1); ++ if (virq) ++ generic_handle_irq(virq); ++ else ++ dev_err_ratelimited(dev, "unexpected IRQ, INT%d\n", ++ bit); ++ ++ /* clear interrupt handled */ ++ csr_writel(pcie, 1 << (PAB_INTX_START + bit), ++ PAB_INTP_AMBA_MISC_STAT); ++ } ++ ++ shifted_status = csr_readl(pcie, ++ PAB_INTP_AMBA_MISC_STAT); ++ shifted_status &= PAB_INTP_INTX_MASK; ++ shifted_status >>= PAB_INTX_START; ++ } while (shifted_status != 0); ++ } ++ ++ /* read extra MSI status register */ ++ msi_status = readl_relaxed(pcie->apb_csr_base + MSI_STATUS_OFFSET); ++ ++ /* handle MSI interrupts */ ++ while (msi_status & 1) { ++ msi_data = readl_relaxed(pcie->apb_csr_base + MSI_DATA_OFFSET); ++ ++ /* ++ * MSI_STATUS_OFFSET register gets updated to zero ++ * once we pop not only the MSI data but also address ++ * from MSI hardware FIFO. So keeping these following ++ * two dummy reads. ++ */ ++ msi_addr_lo = readl_relaxed(pcie->apb_csr_base + ++ MSI_ADDR_L_OFFSET); ++ msi_addr_hi = readl_relaxed(pcie->apb_csr_base + ++ MSI_ADDR_H_OFFSET); ++ dev_dbg(dev, "MSI registers, data: %08x, addr: %08x:%08x\n", ++ msi_data, msi_addr_hi, msi_addr_lo); ++ ++ virq = irq_find_mapping(msi->dev_domain, msi_data); ++ if (virq) ++ generic_handle_irq(virq); ++ ++ msi_status = readl_relaxed(pcie->apb_csr_base + ++ MSI_STATUS_OFFSET); ++ } ++ ++ /* Clear the interrupt status */ ++ csr_writel(pcie, intr_status, PAB_INTP_AMBA_MISC_STAT); ++ chained_irq_exit(chip, desc); ++} ++ ++static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie) ++{ ++ struct device *dev = &pcie->pdev->dev; ++ struct platform_device *pdev = pcie->pdev; ++ struct device_node *node = dev->of_node; ++ struct resource *res; ++ ++ /* map config resource */ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "config_axi_slave"); ++ pcie->rp.config_axi_slave_base = devm_pci_remap_cfg_resource(dev, res); ++ if (IS_ERR(pcie->rp.config_axi_slave_base)) ++ return PTR_ERR(pcie->rp.config_axi_slave_base); ++ pcie->rp.ob_io_res = res; ++ ++ /* map csr resource */ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "csr_axi_slave"); ++ pcie->csr_axi_slave_base = devm_pci_remap_cfg_resource(dev, res); ++ if (IS_ERR(pcie->csr_axi_slave_base)) ++ return PTR_ERR(pcie->csr_axi_slave_base); ++ pcie->pcie_reg_base = res->start; ++ ++ /* read the number of windows requested */ ++ if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins)) ++ pcie->apio_wins = MAX_PIO_WINDOWS; ++ ++ if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins)) ++ pcie->ppio_wins = MAX_PIO_WINDOWS; ++ ++ return 0; ++} ++ ++static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie) ++{ ++ phys_addr_t msg_addr = pcie->pcie_reg_base; ++ struct mobiveil_msi *msi = &pcie->rp.msi; ++ ++ msi->num_of_vectors = PCI_NUM_MSI; ++ msi->msi_pages_phys = (phys_addr_t)msg_addr; ++ ++ writel_relaxed(lower_32_bits(msg_addr), ++ pcie->apb_csr_base + MSI_BASE_LO_OFFSET); ++ writel_relaxed(upper_32_bits(msg_addr), ++ pcie->apb_csr_base + MSI_BASE_HI_OFFSET); ++ writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET); ++ writel_relaxed(1, pcie->apb_csr_base + MSI_ENABLE_OFFSET); ++} ++ ++int mobiveil_host_init(struct mobiveil_pcie *pcie, bool reinit) ++{ ++ u32 value, pab_ctrl, type; ++ struct resource_entry *win; ++ int i; ++ ++ /* Disable all inbound/outbound windows */ ++ for (i = 0; i < pcie->apio_wins; i++) ++ mobiveil_pcie_disable_ob_win(pcie, i); ++ for (i = 0; i < pcie->ppio_wins; i++) ++ mobiveil_pcie_disable_ib_win(pcie, i); ++ ++ pcie->ib_wins_configured = 0; ++ pcie->ob_wins_configured = 0; ++ ++ if (!reinit) { ++ /* setup bus numbers */ ++ value = csr_readl(pcie, PCI_PRIMARY_BUS); ++ value &= 0xff000000; ++ value |= 0x00ff0100; ++ csr_writel(pcie, value, PCI_PRIMARY_BUS); ++ } ++ ++ /* ++ * program Bus Master Enable Bit in Command Register in PAB Config ++ * Space ++ */ ++ value = csr_readl(pcie, PCI_COMMAND); ++ value |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; ++ csr_writel(pcie, value, PCI_COMMAND); ++ ++ /* ++ * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL ++ * register ++ */ ++ pab_ctrl = csr_readl(pcie, PAB_CTRL); ++ pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 << PEX_PIO_ENABLE_SHIFT); ++ csr_writel(pcie, pab_ctrl, PAB_CTRL); ++ ++ /* ++ * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in ++ * PAB_AXI_PIO_CTRL Register ++ */ ++ value = csr_readl(pcie, PAB_AXI_PIO_CTRL); ++ value |= APIO_EN_MASK; ++ csr_writel(pcie, value, PAB_AXI_PIO_CTRL); ++ ++ /* Enable PCIe PIO master */ ++ value = csr_readl(pcie, PAB_PEX_PIO_CTRL); ++ value |= 1 << PIO_ENABLE_SHIFT; ++ csr_writel(pcie, value, PAB_PEX_PIO_CTRL); ++ ++ /* ++ * we'll program one outbound window for config reads and ++ * another default inbound window for all the upstream traffic ++ * rest of the outbound windows will be configured according to ++ * the "ranges" field defined in device tree ++ */ ++ ++ /* config outbound translation window */ ++ program_ob_windows(pcie, WIN_NUM_0, pcie->rp.ob_io_res->start, 0, ++ CFG_WINDOW_TYPE, resource_size(pcie->rp.ob_io_res)); ++ ++ /* memory inbound translation window */ ++ program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE); ++ ++ /* Get the I/O and memory ranges from DT */ ++ resource_list_for_each_entry(win, pcie->resources) { ++ if (resource_type(win->res) == IORESOURCE_MEM) { ++ type = MEM_WINDOW_TYPE; ++ } else if (resource_type(win->res) == IORESOURCE_IO) { ++ type = IO_WINDOW_TYPE; ++ } else if (resource_type(win->res) == IORESOURCE_BUS) { ++ pcie->rp.root_bus_nr = win->res->start; ++ continue; ++ } else { ++ continue; ++ } ++ ++ /* configure outbound translation window */ ++ program_ob_windows(pcie, pcie->ob_wins_configured, ++ win->res->start, ++ win->res->start - win->offset, ++ type, resource_size(win->res)); ++ } ++ ++ /* fixup for PCIe class register */ ++ value = csr_readl(pcie, PAB_INTP_AXI_PIO_CLASS); ++ value &= 0xff; ++ value |= (PCI_CLASS_BRIDGE_PCI << 16); ++ csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS); ++ ++ return 0; ++} ++ ++static void mobiveil_mask_intx_irq(struct irq_data *data) ++{ ++ struct irq_desc *desc = irq_to_desc(data->irq); ++ struct mobiveil_pcie *pcie; ++ unsigned long flags; ++ u32 mask, shifted_val; ++ ++ pcie = irq_desc_get_chip_data(desc); ++ mask = 1 << ((data->hwirq + PAB_INTX_START) - 1); ++ raw_spin_lock_irqsave(&pcie->rp.intx_mask_lock, flags); ++ shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); ++ shifted_val &= ~mask; ++ csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB); ++ raw_spin_unlock_irqrestore(&pcie->rp.intx_mask_lock, flags); ++} ++ ++static void mobiveil_unmask_intx_irq(struct irq_data *data) ++{ ++ struct irq_desc *desc = irq_to_desc(data->irq); ++ struct mobiveil_pcie *pcie; ++ unsigned long flags; ++ u32 shifted_val, mask; ++ ++ pcie = irq_desc_get_chip_data(desc); ++ mask = 1 << ((data->hwirq + PAB_INTX_START) - 1); ++ raw_spin_lock_irqsave(&pcie->rp.intx_mask_lock, flags); ++ shifted_val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); ++ shifted_val |= mask; ++ csr_writel(pcie, shifted_val, PAB_INTP_AMBA_MISC_ENB); ++ raw_spin_unlock_irqrestore(&pcie->rp.intx_mask_lock, flags); ++} ++ ++static struct irq_chip intx_irq_chip = { ++ .name = "mobiveil_pcie:intx", ++ .irq_enable = mobiveil_unmask_intx_irq, ++ .irq_disable = mobiveil_mask_intx_irq, ++ .irq_mask = mobiveil_mask_intx_irq, ++ .irq_unmask = mobiveil_unmask_intx_irq, ++}; ++ ++/* routine to setup the INTx related data */ ++static int mobiveil_pcie_intx_map(struct irq_domain *domain, unsigned int irq, ++ irq_hw_number_t hwirq) ++{ ++ irq_set_chip_and_handler(irq, &intx_irq_chip, handle_level_irq); ++ irq_set_chip_data(irq, domain->host_data); ++ ++ return 0; ++} ++ ++/* INTx domain operations structure */ ++static const struct irq_domain_ops intx_domain_ops = { ++ .map = mobiveil_pcie_intx_map, ++}; ++ ++static struct irq_chip mobiveil_msi_irq_chip = { ++ .name = "Mobiveil PCIe MSI", ++ .irq_mask = pci_msi_mask_irq, ++ .irq_unmask = pci_msi_unmask_irq, ++}; ++ ++static struct msi_domain_info mobiveil_msi_domain_info = { ++ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ++ MSI_FLAG_PCI_MSIX), ++ .chip = &mobiveil_msi_irq_chip, ++}; ++ ++static void mobiveil_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) ++{ ++ struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(data); ++ phys_addr_t addr = pcie->pcie_reg_base + (data->hwirq * sizeof(int)); ++ ++ msg->address_lo = lower_32_bits(addr); ++ msg->address_hi = upper_32_bits(addr); ++ msg->data = data->hwirq; ++ ++ dev_dbg(&pcie->pdev->dev, "msi#%d address_hi %#x address_lo %#x\n", ++ (int)data->hwirq, msg->address_hi, msg->address_lo); ++} ++ ++static int mobiveil_msi_set_affinity(struct irq_data *irq_data, ++ const struct cpumask *mask, bool force) ++{ ++ return -EINVAL; ++} ++ ++static struct irq_chip mobiveil_msi_bottom_irq_chip = { ++ .name = "Mobiveil MSI", ++ .irq_compose_msi_msg = mobiveil_compose_msi_msg, ++ .irq_set_affinity = mobiveil_msi_set_affinity, ++}; ++ ++static int mobiveil_irq_msi_domain_alloc(struct irq_domain *domain, ++ unsigned int virq, ++ unsigned int nr_irqs, void *args) ++{ ++ struct mobiveil_pcie *pcie = domain->host_data; ++ struct mobiveil_msi *msi = &pcie->rp.msi; ++ unsigned long bit; ++ ++ WARN_ON(nr_irqs != 1); ++ mutex_lock(&msi->lock); ++ ++ bit = find_first_zero_bit(msi->msi_irq_in_use, msi->num_of_vectors); ++ if (bit >= msi->num_of_vectors) { ++ mutex_unlock(&msi->lock); ++ return -ENOSPC; ++ } ++ ++ set_bit(bit, msi->msi_irq_in_use); ++ ++ mutex_unlock(&msi->lock); ++ ++ irq_domain_set_info(domain, virq, bit, &mobiveil_msi_bottom_irq_chip, ++ domain->host_data, handle_level_irq, NULL, NULL); ++ return 0; ++} ++ ++static void mobiveil_irq_msi_domain_free(struct irq_domain *domain, ++ unsigned int virq, ++ unsigned int nr_irqs) ++{ ++ struct irq_data *d = irq_domain_get_irq_data(domain, virq); ++ struct mobiveil_pcie *pcie = irq_data_get_irq_chip_data(d); ++ struct mobiveil_msi *msi = &pcie->rp.msi; ++ ++ mutex_lock(&msi->lock); ++ ++ if (!test_bit(d->hwirq, msi->msi_irq_in_use)) ++ dev_err(&pcie->pdev->dev, "trying to free unused MSI#%lu\n", ++ d->hwirq); ++ else ++ __clear_bit(d->hwirq, msi->msi_irq_in_use); ++ ++ mutex_unlock(&msi->lock); ++} ++static const struct irq_domain_ops msi_domain_ops = { ++ .alloc = mobiveil_irq_msi_domain_alloc, ++ .free = mobiveil_irq_msi_domain_free, ++}; ++ ++static int mobiveil_allocate_msi_domains(struct mobiveil_pcie *pcie) ++{ ++ struct device *dev = &pcie->pdev->dev; ++ struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node); ++ struct mobiveil_msi *msi = &pcie->rp.msi; ++ ++ mutex_init(&msi->lock); ++ msi->dev_domain = irq_domain_add_linear(NULL, msi->num_of_vectors, ++ &msi_domain_ops, pcie); ++ if (!msi->dev_domain) { ++ dev_err(dev, "failed to create IRQ domain\n"); ++ return -ENOMEM; ++ } ++ ++ msi->msi_domain = pci_msi_create_irq_domain(fwnode, ++ &mobiveil_msi_domain_info, ++ msi->dev_domain); ++ if (!msi->msi_domain) { ++ dev_err(dev, "failed to create MSI domain\n"); ++ irq_domain_remove(msi->dev_domain); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie) ++{ ++ struct device *dev = &pcie->pdev->dev; ++ struct device_node *node = dev->of_node; ++ int ret; ++ ++ /* setup INTx */ ++ pcie->rp.intx_domain = irq_domain_add_linear(node, PCI_NUM_INTX, ++ &intx_domain_ops, pcie); ++ ++ if (!pcie->rp.intx_domain) { ++ dev_err(dev, "Failed to get a INTx IRQ domain\n"); ++ return -ENOMEM; ++ } ++ ++ raw_spin_lock_init(&pcie->rp.intx_mask_lock); ++ ++ /* setup MSI */ ++ ret = mobiveil_allocate_msi_domains(pcie); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int mobiveil_pcie_interrupt_init(struct mobiveil_pcie *pcie) ++{ ++ struct device *dev = &pcie->pdev->dev; ++ struct resource *res; ++ int ret; ++ ++ if (pcie->rp.ops->interrupt_init) ++ return pcie->rp.ops->interrupt_init(pcie); ++ ++ /* map MSI config resource */ ++ res = platform_get_resource_byname(pcie->pdev, IORESOURCE_MEM, ++ "apb_csr"); ++ pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res); ++ if (IS_ERR(pcie->apb_csr_base)) ++ return PTR_ERR(pcie->apb_csr_base); ++ ++ /* setup MSI hardware registers */ ++ mobiveil_pcie_enable_msi(pcie); ++ ++ pcie->rp.irq = platform_get_irq(pcie->pdev, 0); ++ if (pcie->rp.irq <= 0) { ++ dev_err(dev, "failed to map IRQ: %d\n", pcie->rp.irq); + return -ENODEV; + } + -+ pcie_ep->msi_phys_addr = ep->phys_base + PCIE_MSI_ADDR_OFFSET; ++ /* initialize the IRQ domains */ ++ ret = mobiveil_pcie_init_irq_domain(pcie); ++ if (ret) { ++ dev_err(dev, "Failed creating IRQ Domain\n"); ++ return ret; ++ } ++ ++ irq_set_chained_handler_and_data(pcie->rp.irq, ++ mobiveil_pcie_isr, pcie); ++ ++ /* Enable interrupts */ ++ csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK), ++ PAB_INTP_AMBA_MISC_ENB); ++ ++ return 0; ++} ++ ++int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie) ++{ ++ struct pci_bus *bus; ++ struct pci_bus *child; ++ struct pci_host_bridge *bridge; ++ struct device *dev = &pcie->pdev->dev; ++ struct device_node *np = dev->of_node; ++ resource_size_t iobase; ++ int ret; ++ ++ ret = mobiveil_pcie_parse_dt(pcie); ++ if (ret) { ++ dev_err(dev, "Parsing DT failed, ret: %x\n", ret); ++ return ret; ++ } ++ ++ /* allocate the PCIe port */ ++ bridge = devm_pci_alloc_host_bridge(dev, 0); ++ if (!bridge) ++ return -ENOMEM; ++ ++ /* parse the host bridge base addresses from the device tree file */ ++ ret = of_pci_get_host_bridge_resources(np, 0, 0xff, ++ &bridge->windows, &iobase); ++ if (ret) { ++ dev_err(dev, "Getting bridge resources failed\n"); ++ return ret; ++ } ++ ++ pcie->resources = &bridge->windows; ++ ++ /* ++ * configure all inbound and outbound windows and prepare the RC for ++ * config access ++ */ ++ ret = mobiveil_host_init(pcie, false); ++ if (ret) { ++ dev_err(dev, "Failed to initialize host\n"); ++ goto error; ++ } ++ ++ ret = mobiveil_pcie_interrupt_init(pcie); ++ if (ret) { ++ dev_err(dev, "Interrupt init failed\n"); ++ goto error; ++ } ++ ++ ret = devm_request_pci_bus_resources(dev, pcie->resources); ++ if (ret) ++ goto error; ++ ++ /* Initialize bridge */ ++ bridge->dev.parent = dev; ++ bridge->sysdata = pcie; ++ bridge->busnr = pcie->rp.root_bus_nr; ++ bridge->ops = &mobiveil_pcie_ops; ++ bridge->map_irq = of_irq_parse_and_map_pci; ++ bridge->swizzle_irq = pci_common_swizzle; ++ ++ ret = mobiveil_bringup_link(pcie); ++ if (ret) { ++ dev_info(dev, "link bring-up failed\n"); ++ } ++ ++ /* setup the kernel resources for the newly added PCIe root bus */ ++ ret = pci_scan_root_bus_bridge(bridge); ++ if (ret) ++ goto error; ++ ++ bus = bridge->bus; ++ ++ pci_assign_unassigned_bus_resources(bus); ++ list_for_each_entry(child, &bus->children, node) ++ pcie_bus_configure_settings(child); ++ pci_bus_add_devices(bus); ++ ++ return 0; ++error: ++ pci_free_resource_list(pcie->resources); ++ return ret; ++} +--- /dev/null ++++ b/drivers/pci/mobiveil/pcie-mobiveil-plat.c +@@ -0,0 +1,54 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * PCIe host controller driver for Mobiveil PCIe Host controller ++ * ++ * Copyright (c) 2018 Mobiveil Inc. ++ * Author: Subrahmanya Lingappa ++ * Refactor: Zhiqiang Hou ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-mobiveil.h" ++ ++static int mobiveil_pcie_probe(struct platform_device *pdev) ++{ ++ struct mobiveil_pcie *pcie; ++ struct device *dev = &pdev->dev; ++ ++ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); ++ if (!pcie) ++ return -ENOMEM; ++ ++ pcie->pdev = pdev; ++ ++ return mobiveil_pcie_host_probe(pcie); ++} ++ ++static const struct of_device_id mobiveil_pcie_of_match[] = { ++ {.compatible = "mbvl,gpex40-pcie",}, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match); ++ ++static struct platform_driver mobiveil_pcie_driver = { ++ .probe = mobiveil_pcie_probe, ++ .driver = { ++ .name = "mobiveil-pcie", ++ .of_match_table = mobiveil_pcie_of_match, ++ .suppress_bind_attrs = true, ++ }, ++}; ++ ++builtin_platform_driver(mobiveil_pcie_driver); ++ ++MODULE_LICENSE("GPL v2"); ++MODULE_DESCRIPTION("Mobiveil PCIe host controller driver"); ++MODULE_AUTHOR("Subrahmanya Lingappa "); +--- /dev/null ++++ b/drivers/pci/mobiveil/pcie-mobiveil.c +@@ -0,0 +1,334 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * PCIe host controller driver for Mobiveil PCIe Host controller ++ * ++ * Copyright (c) 2018 Mobiveil Inc. ++ * Author: Subrahmanya Lingappa ++ * Refactor: Zhiqiang Hou ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-mobiveil.h" ++ ++/* ++ * mobiveil_pcie_sel_page - routine to access paged register ++ * ++ * Registers whose address greater than PAGED_ADDR_BNDRY (0xc00) are paged, ++ * for this scheme to work extracted higher 6 bits of the offset will be ++ * written to pg_sel field of PAB_CTRL register and rest of the lower 10 ++ * bits enabled with PAGED_ADDR_BNDRY are used as offset of the register. ++ */ ++static void mobiveil_pcie_sel_page(struct mobiveil_pcie *pcie, u8 pg_idx) ++{ ++ u32 val; ++ ++ val = readl(pcie->csr_axi_slave_base + PAB_CTRL); ++ val &= ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT); ++ val |= (pg_idx & PAGE_SEL_MASK) << PAGE_SEL_SHIFT; ++ ++ writel(val, pcie->csr_axi_slave_base + PAB_CTRL); ++} ++ ++static void *mobiveil_pcie_comp_addr(struct mobiveil_pcie *pcie, u32 off) ++{ ++ if (off < PAGED_ADDR_BNDRY) { ++ /* For directly accessed registers, clear the pg_sel field */ ++ mobiveil_pcie_sel_page(pcie, 0); ++ return pcie->csr_axi_slave_base + off; ++ } ++ ++ mobiveil_pcie_sel_page(pcie, OFFSET_TO_PAGE_IDX(off)); ++ return pcie->csr_axi_slave_base + OFFSET_TO_PAGE_ADDR(off); ++} + -+ pcie_ep->msi_virt_addr = ioremap(pcie_ep->msi_phys_addr, -+ PCIE_MSI_OB_SIZE); -+ if (!pcie_ep->msi_virt_addr) { -+ dev_err(dev, "failed to map MSI outbound region\n"); -+ return -ENOMEM; ++static int mobiveil_pcie_read(void __iomem *addr, int size, u32 *val) ++{ ++ if ((uintptr_t)addr & (size - 1)) { ++ *val = 0; ++ return PCIBIOS_BAD_REGISTER_NUMBER; + } + -+ ret = dw_pcie_ep_init(ep); -+ if (ret) { -+ dev_err(dev, "failed to initialize endpoint\n"); -+ return ret; ++ switch (size) { ++ case 4: ++ *val = readl(addr); ++ break; ++ case 2: ++ *val = readw(addr); ++ break; ++ case 1: ++ *val = readb(addr); ++ break; ++ default: ++ *val = 0; ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int mobiveil_pcie_write(void __iomem *addr, int size, u32 val) ++{ ++ if ((uintptr_t)addr & (size - 1)) ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ ++ switch (size) { ++ case 4: ++ writel(val, addr); ++ break; ++ case 2: ++ writew(val, addr); ++ break; ++ case 1: ++ writeb(val, addr); ++ break; ++ default: ++ return PCIBIOS_BAD_REGISTER_NUMBER; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size) ++{ ++ void *addr; ++ u32 val; ++ int ret; ++ ++ addr = mobiveil_pcie_comp_addr(pcie, off); ++ ++ ret = mobiveil_pcie_read(addr, size, &val); ++ if (ret) ++ dev_err(&pcie->pdev->dev, "read CSR address failed\n"); ++ ++ return val; ++} ++ ++void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size) ++{ ++ void *addr; ++ int ret; ++ ++ addr = mobiveil_pcie_comp_addr(pcie, off); ++ ++ ret = mobiveil_pcie_write(addr, size, val); ++ if (ret) ++ dev_err(&pcie->pdev->dev, "write CSR address failed\n"); ++} ++ ++bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie) ++{ ++ if (pcie->ops->link_up) ++ return pcie->ops->link_up(pcie); ++ ++ return (csr_readl(pcie, LTSSM_STATUS) & ++ LTSSM_STATUS_L0_MASK) == LTSSM_STATUS_L0; ++} ++ ++void program_ib_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr, ++ u64 pci_addr, u32 type, u64 size) ++{ ++ u32 value; ++ u64 size64 = ~(size - 1); ++ ++ if (win_num >= pcie->ppio_wins) { ++ dev_err(&pcie->pdev->dev, ++ "ERROR: max inbound windows reached !\n"); ++ return; ++ } ++ ++ value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num)); ++ value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT | ++ WIN_SIZE_MASK << WIN_SIZE_SHIFT); ++ value |= (type << AMAP_CTRL_TYPE_SHIFT) | (1 << AMAP_CTRL_EN_SHIFT) | ++ (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT); ++ csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num)); ++ ++ csr_writel(pcie, upper_32_bits(size64), ++ PAB_EXT_PEX_AMAP_SIZEN(win_num)); ++ ++ csr_writel(pcie, lower_32_bits(cpu_addr), ++ PAB_PEX_AMAP_AXI_WIN(win_num)); ++ csr_writel(pcie, upper_32_bits(cpu_addr), ++ PAB_EXT_PEX_AMAP_AXI_WIN(win_num)); ++ ++ csr_writel(pcie, lower_32_bits(pci_addr), ++ PAB_PEX_AMAP_PEX_WIN_L(win_num)); ++ csr_writel(pcie, upper_32_bits(pci_addr), ++ PAB_PEX_AMAP_PEX_WIN_H(win_num)); ++ ++ pcie->ib_wins_configured++; ++} ++ ++/* ++ * routine to program the outbound windows ++ */ ++void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr, ++ u64 pci_addr, u32 type, u64 size) ++{ ++ ++ u32 value; ++ u64 size64 = ~(size - 1); ++ ++ if (win_num >= pcie->apio_wins) { ++ dev_err(&pcie->pdev->dev, ++ "ERROR: max outbound windows reached !\n"); ++ return; + } + ++ /* ++ * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit ++ * to 4 KB in PAB_AXI_AMAP_CTRL register ++ */ ++ value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num)); ++ value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT | ++ WIN_SIZE_MASK << WIN_SIZE_SHIFT); ++ value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT | ++ (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT); ++ csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num)); ++ ++ csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num)); ++ ++ /* ++ * program AXI window base with appropriate value in ++ * PAB_AXI_AMAP_AXI_WIN0 register ++ */ ++ csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK), ++ PAB_AXI_AMAP_AXI_WIN(win_num)); ++ csr_writel(pcie, upper_32_bits(cpu_addr), ++ PAB_EXT_AXI_AMAP_AXI_WIN(win_num)); ++ ++ csr_writel(pcie, lower_32_bits(pci_addr), ++ PAB_AXI_AMAP_PEX_WIN_L(win_num)); ++ csr_writel(pcie, upper_32_bits(pci_addr), ++ PAB_AXI_AMAP_PEX_WIN_H(win_num)); ++ ++ pcie->ob_wins_configured++; ++} ++ ++int program_ob_windows_ep(struct mobiveil_pcie *pcie, int win_num, int type, ++ u64 phys, u64 bus_addr, u8 func, u64 size) ++{ ++ u32 val; ++ u32 size_h, size_l; ++ ++ if (size & (size - 1)) ++ size = 1 << (1 + ilog2(size)); ++ ++ size_h = upper_32_bits(~(size - 1)); ++ size_l = lower_32_bits(~(size - 1)); ++ ++ val = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num)); ++ val &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT | ++ WIN_SIZE_MASK << WIN_SIZE_SHIFT); ++ val |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT | ++ (size_l & (WIN_SIZE_MASK << WIN_SIZE_SHIFT)); ++ csr_writel(pcie, val, PAB_AXI_AMAP_CTRL(win_num)); ++ ++ csr_writel(pcie, func, PAB_AXI_AMAP_PCI_HDR_PARAM(win_num)); ++ csr_writel(pcie, lower_32_bits(phys), PAB_AXI_AMAP_AXI_WIN(win_num)); ++ csr_writel(pcie, upper_32_bits(phys), ++ PAB_EXT_AXI_AMAP_AXI_WIN(win_num)); ++ csr_writel(pcie, lower_32_bits(bus_addr), ++ PAB_AXI_AMAP_PEX_WIN_L(win_num)); ++ csr_writel(pcie, upper_32_bits(bus_addr), ++ PAB_AXI_AMAP_PEX_WIN_H(win_num)); ++ csr_writel(pcie, size_h, PAB_EXT_AXI_AMAP_SIZE(win_num)); ++ + return 0; +} + - static int __init ls_add_pcie_port(struct ls_pcie *pcie) - { - struct dw_pcie *pci = pcie->pci; -@@ -309,18 +427,18 @@ static int __init ls_pcie_probe(struct p - if (IS_ERR(pci->dbi_base)) - return PTR_ERR(pci->dbi_base); - -- pcie->lut = pci->dbi_base + pcie->drvdata->lut_offset; -+ pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_BASE; - -- if (!ls_pcie_is_bridge(pcie)) -- return -ENODEV; -+ pcie->lut = pci->dbi_base + pcie->drvdata->lut_offset; - - platform_set_drvdata(pdev, pcie); - -- ret = ls_add_pcie_port(pcie); -- if (ret < 0) -- return ret; -+ if (!ls_pcie_is_bridge(pcie)) -+ ret = ls_add_pcie_ep(pcie, pdev); -+ else -+ ret = ls_add_pcie_port(pcie); - -- return 0; -+ return ret; - } - - static struct platform_driver ls_pcie_driver = { ---- a/drivers/pci/endpoint/functions/pci-epf-test.c -+++ b/drivers/pci/endpoint/functions/pci-epf-test.c -@@ -471,7 +471,7 @@ static int pci_epf_test_probe(struct pci - const struct pci_epf_device_id *match; - struct pci_epf_test_data *data; - enum pci_barno test_reg_bar = BAR_0; -- bool linkup_notifier = true; -+ bool linkup_notifier = false; - - match = pci_epf_match_device(pci_epf_test_ids, epf); - data = (struct pci_epf_test_data *)match->driver_data; ---- a/drivers/pci/endpoint/pci-epf-core.c -+++ b/drivers/pci/endpoint/pci-epf-core.c -@@ -104,8 +104,8 @@ void pci_epf_free_space(struct pci_epf * - if (!addr) - return; - -- dma_free_coherent(dev, epf->bar[bar].size, addr, -- epf->bar[bar].phys_addr); -+ free_pages((unsigned long)addr, -+ get_order(epf->bar[bar].size)); - - epf->bar[bar].phys_addr = 0; - epf->bar[bar].size = 0; -@@ -129,7 +129,9 @@ void *pci_epf_alloc_space(struct pci_epf - size = 128; - size = roundup_pow_of_two(size); - -- space = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL); -+ space = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, -+ get_order(size)); -+ phys_addr = virt_to_phys(space); - if (!space) { - dev_err(dev, "failed to allocate mem space\n"); - return NULL; ++void program_ib_windows_ep(struct mobiveil_pcie *pcie, u8 func_no, ++ int bar, u64 phys) ++{ ++ csr_writel(pcie, upper_32_bits(phys), ++ PAB_EXT_PEX_BAR_AMAP(func_no, bar)); ++ csr_writel(pcie, lower_32_bits(phys) | PEX_BAR_AMAP_EN, ++ PAB_PEX_BAR_AMAP(func_no, bar)); ++} ++ ++void mobiveil_pcie_disable_ib_win_ep(struct mobiveil_pcie *pcie, ++ u8 func_no, u8 bar) ++{ ++ u32 val; ++ ++ val = csr_readl(pcie, PAB_PEX_BAR_AMAP(func_no, bar)); ++ val &= ~(1 << 0); ++ csr_writel(pcie, val, PAB_PEX_BAR_AMAP(func_no, bar)); ++} ++ ++int mobiveil_bringup_link(struct mobiveil_pcie *pcie) ++{ ++ int retries; ++ ++ /* check if the link is up or not */ ++ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { ++ if (mobiveil_pcie_link_up(pcie)) ++ return 0; ++ ++ usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX); ++ } ++ ++ dev_info(&pcie->pdev->dev, "link never came up\n"); ++ ++ return -ETIMEDOUT; ++} ++ ++void mobiveil_pcie_disable_ib_win(struct mobiveil_pcie *pcie, int win_num) ++{ ++ u32 val; ++ ++ val = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num)); ++ val &= ~(1 << AMAP_CTRL_EN_SHIFT); ++ csr_writel(pcie, val, PAB_PEX_AMAP_CTRL(win_num)); ++} ++ ++void mobiveil_pcie_disable_ob_win(struct mobiveil_pcie *pcie, int win_num) ++{ ++ u32 val; ++ ++ val = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num)); ++ val &= ~(1 << WIN_ENABLE_SHIFT); ++ csr_writel(pcie, val, PAB_AXI_AMAP_CTRL(win_num)); ++} ++ ++void mobiveil_pcie_enable_bridge_pio(struct mobiveil_pcie *pcie) ++{ ++ u32 val; ++ ++ val = csr_readl(pcie, PAB_CTRL); ++ val |= 1 << AMBA_PIO_ENABLE_SHIFT; ++ val |= 1 << PEX_PIO_ENABLE_SHIFT; ++ csr_writel(pcie, val, PAB_CTRL); ++} ++ ++void mobiveil_pcie_enable_engine_apio(struct mobiveil_pcie *pcie) ++{ ++ u32 val; ++ ++ val = csr_readl(pcie, PAB_AXI_PIO_CTRL); ++ val |= APIO_EN_MASK; ++ csr_writel(pcie, val, PAB_AXI_PIO_CTRL); ++} ++ ++void mobiveil_pcie_enable_engine_ppio(struct mobiveil_pcie *pcie) ++{ ++ u32 val; ++ ++ val = csr_readl(pcie, PAB_PEX_PIO_CTRL); ++ val |= 1 << PIO_ENABLE_SHIFT; ++ csr_writel(pcie, val, PAB_PEX_PIO_CTRL); ++} ++ ++void mobiveil_pcie_enable_msi_ep(struct mobiveil_pcie *pcie) ++{ ++ u32 val; ++ ++ val = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); ++ val |= 1 << 0; ++ csr_writel(pcie, val, PAB_INTP_AMBA_MISC_ENB); ++} +--- /dev/null ++++ b/drivers/pci/mobiveil/pcie-mobiveil.h +@@ -0,0 +1,296 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * PCIe host controller driver for Mobiveil PCIe Host controller ++ * ++ * Copyright (c) 2018 Mobiveil Inc. ++ * Author: Subrahmanya Lingappa ++ * Refactor: Zhiqiang Hou ++ */ ++ ++#ifndef _PCIE_MOBIVEIL_H ++#define _PCIE_MOBIVEIL_H ++ ++#include ++#include ++#include ++#include "../pci.h" ++ ++#include ++#include ++ ++#define MAX_IATU_OUT 256 ++/* register offsets and bit positions */ ++ ++/* ++ * translation tables are grouped into windows, each window registers are ++ * grouped into blocks of 4 or 16 registers each ++ */ ++#define PAB_REG_BLOCK_SIZE 16 ++#define PAB_EXT_REG_BLOCK_SIZE 4 ++ ++#define PAB_REG_ADDR(offset, win) \ ++ (offset + (win * PAB_REG_BLOCK_SIZE)) ++#define PAB_EXT_REG_ADDR(offset, win) \ ++ (offset + (win * PAB_EXT_REG_BLOCK_SIZE)) ++ ++#define LTSSM_STATUS 0x0404 ++#define LTSSM_STATUS_L0_MASK 0x3f ++#define LTSSM_STATUS_L0 0x2d ++ ++#define PAB_CTRL 0x0808 ++#define AMBA_PIO_ENABLE_SHIFT 0 ++#define PEX_PIO_ENABLE_SHIFT 1 ++#define PAGE_SEL_SHIFT 13 ++#define PAGE_SEL_MASK 0x3f ++#define PAGE_LO_MASK 0x3ff ++#define PAGE_SEL_OFFSET_SHIFT 10 ++#define FUNC_SEL_SHIFT 19 ++#define FUNC_SEL_MASK 0x1ff ++#define MSI_SW_CTRL_EN (1 << 29) ++ ++#define PAB_ACTIVITY_STAT 0x81c ++ ++#define PAB_AXI_PIO_CTRL 0x0840 ++#define APIO_EN_MASK 0xf ++ ++#define PAB_PEX_PIO_CTRL 0x08c0 ++#define PIO_ENABLE_SHIFT 0 ++ ++#define PAB_INTP_AMBA_MISC_ENB 0x0b0c ++#define PAB_INTP_AMBA_MISC_STAT 0x0b1c ++#define PAB_INTP_RESET (0x1 << 1) ++#define PAB_INTP_MSI (0x1 << 3) ++#define PAB_INTP_INTA (0x1 << 5) ++#define PAB_INTP_INTB (0x1 << 6) ++#define PAB_INTP_INTC (0x1 << 7) ++#define PAB_INTP_INTD (0x1 << 8) ++#define PAB_INTP_PCIE_UE (0x1 << 9) ++#define PAB_INTP_IE_PMREDI (0x1 << 29) ++#define PAB_INTP_IE_EC (0x1 << 30) ++#define PAB_INTP_MSI_MASK PAB_INTP_MSI ++#define PAB_INTP_INTX_MASK (PAB_INTP_INTA | PAB_INTP_INTB |\ ++ PAB_INTP_INTC | PAB_INTP_INTD) ++ ++#define PAB_AXI_AMAP_CTRL(win) PAB_REG_ADDR(0x0ba0, win) ++#define WIN_ENABLE_SHIFT 0 ++#define WIN_TYPE_SHIFT 1 ++#define WIN_TYPE_MASK 0x3 ++#define WIN_SIZE_SHIFT 10 ++#define WIN_SIZE_MASK 0x3fffff ++ ++#define PAB_EXT_AXI_AMAP_SIZE(win) PAB_EXT_REG_ADDR(0xbaf0, win) ++ ++#define PAB_EXT_AXI_AMAP_AXI_WIN(win) PAB_EXT_REG_ADDR(0x80a0, win) ++#define PAB_AXI_AMAP_AXI_WIN(win) PAB_REG_ADDR(0x0ba4, win) ++#define AXI_WINDOW_ALIGN_MASK 3 ++ ++#define PAB_AXI_AMAP_PEX_WIN_L(win) PAB_REG_ADDR(0x0ba8, win) ++#define PAB_BUS_SHIFT 24 ++#define PAB_DEVICE_SHIFT 19 ++#define PAB_FUNCTION_SHIFT 16 ++ ++#define PAB_AXI_AMAP_PEX_WIN_H(win) PAB_REG_ADDR(0x0bac, win) ++#define PAB_INTP_AXI_PIO_CLASS 0x474 ++ ++#define GPEX_ACK_REPLAY_TO 0x438 ++#define ACK_LAT_TO_VAL_MASK 0x1fff ++#define ACK_LAT_TO_VAL_SHIFT 0 ++ ++#define PAB_PEX_AMAP_CTRL(win) PAB_REG_ADDR(0x4ba0, win) ++#define AMAP_CTRL_EN_SHIFT 0 ++#define AMAP_CTRL_TYPE_SHIFT 1 ++#define AMAP_CTRL_TYPE_MASK 3 ++ ++#define PAB_EXT_PEX_AMAP_SIZEN(win) PAB_EXT_REG_ADDR(0xbef0, win) ++#define PAB_EXT_PEX_AMAP_AXI_WIN(win) PAB_EXT_REG_ADDR(0xb4a0, win) ++#define PAB_PEX_AMAP_AXI_WIN(win) PAB_REG_ADDR(0x4ba4, win) ++#define PAB_PEX_AMAP_PEX_WIN_L(win) PAB_REG_ADDR(0x4ba8, win) ++#define PAB_PEX_AMAP_PEX_WIN_H(win) PAB_REG_ADDR(0x4bac, win) ++ ++/* PPIO WINs EP mode */ ++#define PAB_PEX_BAR_AMAP(func, bar) (0x1ba0 + 0x20 * func + 4 * bar) ++#define PAB_EXT_PEX_BAR_AMAP(func, bar) (0x84a0 + 0x20 * func + 4 * bar) ++#define PEX_BAR_AMAP_EN (1 << 0) ++ ++#define PAB_AXI_AMAP_PCI_HDR_PARAM(idx) (0x5ba0 + 0x04 * idx) ++#define PAB_MSIX_TABLE_PBA_ACCESS 0xD000 ++ ++#define GPEX_BAR_ENABLE 0x4D4 ++#define GPEX_BAR_SIZE_LDW 0x4D8 ++#define GPEX_BAR_SIZE_UDW 0x4DC ++#define GPEX_BAR_SELECT 0x4E0 ++ ++#define CFG_UNCORRECTABLE_ERROR_SEVERITY 0x10c ++#define UNSUPPORTED_REQUEST_ERROR_SHIFT 20 ++#define CFG_UNCORRECTABLE_ERROR_MASK 0x108 ++ ++/* starting offset of INTX bits in status register */ ++#define PAB_INTX_START 5 ++ ++/* supported number of MSI interrupts */ ++#define PCI_NUM_MSI 16 ++ ++/* MSI registers */ ++#define MSI_BASE_LO_OFFSET 0x04 ++#define MSI_BASE_HI_OFFSET 0x08 ++#define MSI_SIZE_OFFSET 0x0c ++#define MSI_ENABLE_OFFSET 0x14 ++#define MSI_STATUS_OFFSET 0x18 ++#define MSI_DATA_OFFSET 0x20 ++#define MSI_ADDR_L_OFFSET 0x24 ++#define MSI_ADDR_H_OFFSET 0x28 ++ ++/* outbound and inbound window definitions */ ++#define WIN_NUM_0 0 ++#define WIN_NUM_1 1 ++#define CFG_WINDOW_TYPE 0 ++#define IO_WINDOW_TYPE 1 ++#define MEM_WINDOW_TYPE 2 ++#define IB_WIN_SIZE ((u64)256 * 1024 * 1024 * 1024) ++#define MAX_PIO_WINDOWS 8 ++ ++/* Parameters for the waiting for link up routine */ ++#define LINK_WAIT_MAX_RETRIES 10 ++#define LINK_WAIT_MIN 90000 ++#define LINK_WAIT_MAX 100000 ++ ++#define PAGED_ADDR_BNDRY 0xc00 ++#define OFFSET_TO_PAGE_ADDR(off) \ ++ ((off & PAGE_LO_MASK) | PAGED_ADDR_BNDRY) ++#define OFFSET_TO_PAGE_IDX(off) \ ++ ((off >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK) ++ ++struct mobiveil_pcie; ++struct mobiveil_pcie_ep; ++ ++struct mobiveil_msi { /* MSI information */ ++ struct mutex lock; /* protect bitmap variable */ ++ struct irq_domain *msi_domain; ++ struct irq_domain *dev_domain; ++ phys_addr_t msi_pages_phys; ++ int num_of_vectors; ++ DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI); ++}; ++ ++struct mobiveil_rp_ops { ++ int (*interrupt_init)(struct mobiveil_pcie *pcie); ++ int (*read_other_conf)(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *val); ++}; ++ ++struct root_port { ++ u8 root_bus_nr; ++ void __iomem *config_axi_slave_base; /* endpoint config base */ ++ struct resource *ob_io_res; ++ struct mobiveil_rp_ops *ops; ++ int irq; ++ raw_spinlock_t intx_mask_lock; ++ struct irq_domain *intx_domain; ++ struct mobiveil_msi msi; ++}; ++ ++struct mobiveil_pab_ops { ++ int (*link_up)(struct mobiveil_pcie *pcie); ++}; ++ ++struct mobiveil_pcie_ep_ops { ++ void (*ep_init)(struct mobiveil_pcie_ep *ep); ++ int (*raise_irq)(struct mobiveil_pcie_ep *ep, u8 func_no, ++ enum pci_epc_irq_type type, u16 interrupt_num); ++}; ++ ++struct mobiveil_pcie_ep { ++ struct pci_epc *epc; ++ struct mobiveil_pcie_ep_ops *ops; ++ phys_addr_t phys_base; ++ size_t addr_size; ++ size_t page_size; ++ phys_addr_t *outbound_addr; ++ unsigned long *ob_window_map; ++ u32 num_ob_windows; ++ void __iomem *msi_mem; ++ phys_addr_t msi_mem_phys; ++ u8 msi_cap; /* MSI capability offset */ ++ u8 msix_cap; /* MSI-X capability offset */ ++ u8 bar_num; ++ u32 pf_num; ++}; ++ ++struct mobiveil_pcie { ++ struct platform_device *pdev; ++ struct list_head *resources; ++ void __iomem *csr_axi_slave_base; /* PAB registers base */ ++ phys_addr_t pcie_reg_base; /* Physical PCIe Controller Base */ ++ void __iomem *apb_csr_base; /* MSI register base */ ++ u32 apio_wins; ++ u32 ppio_wins; ++ u32 ob_wins_configured; /* configured outbound windows */ ++ u32 ib_wins_configured; /* configured inbound windows */ ++ const struct mobiveil_pab_ops *ops; ++ struct root_port rp; ++ struct mobiveil_pcie_ep ep; ++}; ++#define to_mobiveil_pcie_from_ep(endpoint) \ ++ container_of((endpoint), struct mobiveil_pcie, ep) ++ ++int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie); ++int mobiveil_host_init(struct mobiveil_pcie *pcie, bool reinit); ++bool mobiveil_pcie_link_up(struct mobiveil_pcie *pcie); ++int mobiveil_bringup_link(struct mobiveil_pcie *pcie); ++void program_ob_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr, ++ u64 pci_addr, u32 type, u64 size); ++void program_ib_windows(struct mobiveil_pcie *pcie, int win_num, u64 cpu_addr, ++ u64 pci_addr, u32 type, u64 size); ++void mobiveil_pcie_disable_ob_win(struct mobiveil_pcie *pci, int win_num); ++void mobiveil_pcie_disable_ib_win(struct mobiveil_pcie *pci, int win_num); ++u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size); ++void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size); ++ ++static inline u32 csr_readl(struct mobiveil_pcie *pcie, u32 off) ++{ ++ return csr_read(pcie, off, 0x4); ++} ++ ++static inline u32 csr_readw(struct mobiveil_pcie *pcie, u32 off) ++{ ++ return csr_read(pcie, off, 0x2); ++} ++ ++static inline u32 csr_readb(struct mobiveil_pcie *pcie, u32 off) ++{ ++ return csr_read(pcie, off, 0x1); ++} ++ ++static inline void csr_writel(struct mobiveil_pcie *pcie, u32 val, u32 off) ++{ ++ csr_write(pcie, val, off, 0x4); ++} ++ ++static inline void csr_writew(struct mobiveil_pcie *pcie, u32 val, u32 off) ++{ ++ csr_write(pcie, val, off, 0x2); ++} ++ ++static inline void csr_writeb(struct mobiveil_pcie *pcie, u32 val, u32 off) ++{ ++ csr_write(pcie, val, off, 0x1); ++} ++ ++void program_ib_windows_ep(struct mobiveil_pcie *pcie, u8 func_no, ++ int bar, u64 phys); ++int program_ob_windows_ep(struct mobiveil_pcie *pcie, int win_num, int type, ++ u64 phys, u64 bus_addr, u8 func, u64 size); ++void mobiveil_pcie_disable_ib_win_ep(struct mobiveil_pcie *pci, ++ u8 func_no, u8 bar); ++int mobiveil_pcie_ep_init(struct mobiveil_pcie_ep *ep); ++int mobiveil_pcie_ep_raise_legacy_irq(struct mobiveil_pcie_ep *ep, u8 func_no); ++int mobiveil_pcie_ep_raise_msi_irq(struct mobiveil_pcie_ep *ep, u8 func_no, ++ u8 interrupt_num); ++int mobiveil_pcie_ep_raise_msix_irq(struct mobiveil_pcie_ep *ep, u8 func_no, ++ u16 interrupt_num); ++void mobiveil_pcie_ep_reset_bar(struct mobiveil_pcie *pci, enum pci_barno bar); ++void mobiveil_pcie_enable_bridge_pio(struct mobiveil_pcie *pci); ++void mobiveil_pcie_enable_engine_apio(struct mobiveil_pcie *pci); ++void mobiveil_pcie_enable_engine_ppio(struct mobiveil_pcie *pci); ++void mobiveil_pcie_enable_msi_ep(struct mobiveil_pcie *pci); ++#endif /* _PCIE_MOBIVEIL_H */ --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -45,6 +45,20 @@ static void release_pcie_device(struct d @@ -584,6 +5710,194 @@ Signed-off-by: Biwen Li + pdev->no_msi = 1; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_no_msi); +--- a/include/linux/pci-ep-cfs.h ++++ b/include/linux/pci-ep-cfs.h +@@ -1,12 +1,9 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ + /** + * PCI Endpoint ConfigFS header file + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. + */ + + #ifndef __LINUX_PCI_EP_CFS_H +--- a/include/linux/pci-epc.h ++++ b/include/linux/pci-epc.h +@@ -1,12 +1,9 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ + /** + * PCI Endpoint *Controller* (EPC) header file + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. + */ + + #ifndef __LINUX_PCI_EPC_H +@@ -20,6 +17,7 @@ enum pci_epc_irq_type { + PCI_EPC_IRQ_UNKNOWN, + PCI_EPC_IRQ_LEGACY, + PCI_EPC_IRQ_MSI, ++ PCI_EPC_IRQ_MSIX, + }; + + /** +@@ -33,24 +31,32 @@ enum pci_epc_irq_type { + * capability register + * @get_msi: ops to get the number of MSI interrupts allocated by the RC from + * the MSI capability register +- * @raise_irq: ops to raise a legacy or MSI interrupt ++ * @set_msix: ops to set the requested number of MSI-X interrupts in the ++ * MSI-X capability register ++ * @get_msix: ops to get the number of MSI-X interrupts allocated by the RC ++ * from the MSI-X capability register ++ * @raise_irq: ops to raise a legacy, MSI or MSI-X interrupt + * @start: ops to start the PCI link + * @stop: ops to stop the PCI link + * @owner: the module owner containing the ops + */ + struct pci_epc_ops { +- int (*write_header)(struct pci_epc *pci_epc, ++ int (*write_header)(struct pci_epc *epc, u8 func_no, + struct pci_epf_header *hdr); +- int (*set_bar)(struct pci_epc *epc, enum pci_barno bar, +- dma_addr_t bar_phys, size_t size, int flags); +- void (*clear_bar)(struct pci_epc *epc, enum pci_barno bar); +- int (*map_addr)(struct pci_epc *epc, phys_addr_t addr, +- u64 pci_addr, size_t size); +- void (*unmap_addr)(struct pci_epc *epc, phys_addr_t addr); +- int (*set_msi)(struct pci_epc *epc, u8 interrupts); +- int (*get_msi)(struct pci_epc *epc); +- int (*raise_irq)(struct pci_epc *pci_epc, +- enum pci_epc_irq_type type, u8 interrupt_num); ++ int (*set_bar)(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar); ++ void (*clear_bar)(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar); ++ int (*map_addr)(struct pci_epc *epc, u8 func_no, ++ phys_addr_t addr, u64 pci_addr, size_t size); ++ void (*unmap_addr)(struct pci_epc *epc, u8 func_no, ++ phys_addr_t addr); ++ int (*set_msi)(struct pci_epc *epc, u8 func_no, u8 interrupts); ++ int (*get_msi)(struct pci_epc *epc, u8 func_no); ++ int (*set_msix)(struct pci_epc *epc, u8 func_no, u16 interrupts); ++ int (*get_msix)(struct pci_epc *epc, u8 func_no); ++ int (*raise_irq)(struct pci_epc *epc, u8 func_no, ++ enum pci_epc_irq_type type, u16 interrupt_num); + int (*start)(struct pci_epc *epc); + void (*stop)(struct pci_epc *epc); + struct module *owner; +@@ -91,8 +97,17 @@ struct pci_epc { + struct config_group *group; + /* spinlock to protect against concurrent access of EP controller */ + spinlock_t lock; ++ unsigned int features; + }; + ++#define EPC_FEATURE_NO_LINKUP_NOTIFIER BIT(0) ++#define EPC_FEATURE_BAR_MASK (BIT(1) | BIT(2) | BIT(3)) ++#define EPC_FEATURE_MSIX_AVAILABLE BIT(4) ++#define EPC_FEATURE_SET_BAR(features, bar) \ ++ (features |= (EPC_FEATURE_BAR_MASK & (bar << 1))) ++#define EPC_FEATURE_GET_BAR(features) \ ++ ((features & EPC_FEATURE_BAR_MASK) >> 1) ++ + #define to_pci_epc(device) container_of((device), struct pci_epc, dev) + + #define pci_epc_create(dev, ops) \ +@@ -124,17 +139,23 @@ void pci_epc_destroy(struct pci_epc *epc + int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf); + void pci_epc_linkup(struct pci_epc *epc); + void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf); +-int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *hdr); +-int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar, +- dma_addr_t bar_phys, size_t size, int flags); +-void pci_epc_clear_bar(struct pci_epc *epc, int bar); +-int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr, ++int pci_epc_write_header(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_header *hdr); ++int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar); ++void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, ++ struct pci_epf_bar *epf_bar); ++int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t phys_addr, + u64 pci_addr, size_t size); +-void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr); +-int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts); +-int pci_epc_get_msi(struct pci_epc *epc); +-int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type, +- u8 interrupt_num); ++void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no, ++ phys_addr_t phys_addr); ++int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts); ++int pci_epc_get_msi(struct pci_epc *epc, u8 func_no); ++int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts); ++int pci_epc_get_msix(struct pci_epc *epc, u8 func_no); ++int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, ++ enum pci_epc_irq_type type, u16 interrupt_num); + int pci_epc_start(struct pci_epc *epc); + void pci_epc_stop(struct pci_epc *epc); + struct pci_epc *pci_epc_get(const char *epc_name); +--- a/include/linux/pci-epf.h ++++ b/include/linux/pci-epf.h +@@ -1,12 +1,9 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ + /** + * PCI Endpoint *Function* (EPF) header file + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I +- * +- * This program is free software: you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 of +- * the License as published by the Free Software Foundation. + */ + + #ifndef __LINUX_PCI_EPF_H +@@ -75,7 +72,7 @@ struct pci_epf_ops { + * @driver: PCI EPF driver + * @ops: set of function pointers for performing EPF operations + * @owner: the owner of the module that registers the PCI EPF driver +- * @group: configfs group corresponding to the PCI EPF driver ++ * @epf_group: list of configfs group corresponding to the PCI EPF driver + * @id_table: identifies EPF devices for probing + */ + struct pci_epf_driver { +@@ -85,7 +82,7 @@ struct pci_epf_driver { + struct device_driver driver; + struct pci_epf_ops *ops; + struct module *owner; +- struct config_group *group; ++ struct list_head epf_group; + const struct pci_epf_device_id *id_table; + }; + +@@ -100,6 +97,8 @@ struct pci_epf_driver { + struct pci_epf_bar { + dma_addr_t phys_addr; + size_t size; ++ enum pci_barno barno; ++ int flags; + }; + + /** +@@ -120,6 +119,7 @@ struct pci_epf { + struct pci_epf_header *header; + struct pci_epf_bar bar[6]; + u8 msi_interrupts; ++ u16 msix_interrupts; + u8 func_no; + + struct pci_epc *epc; --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1946,6 +1946,7 @@ void pcibios_release_device(struct pci_d @@ -594,3 +5908,150 @@ Signed-off-by: Biwen Li #ifdef CONFIG_HIBERNATE_CALLBACKS extern struct dev_pm_ops pcibios_pm_ops; +--- a/include/uapi/linux/pcitest.h ++++ b/include/uapi/linux/pcitest.h +@@ -16,5 +16,8 @@ + #define PCITEST_WRITE _IOW('P', 0x4, unsigned long) + #define PCITEST_READ _IOW('P', 0x5, unsigned long) + #define PCITEST_COPY _IOW('P', 0x6, unsigned long) ++#define PCITEST_MSIX _IOW('P', 0x7, int) ++#define PCITEST_SET_IRQTYPE _IOW('P', 0x8, int) ++#define PCITEST_GET_IRQTYPE _IO('P', 0x9) + + #endif /* __UAPI_LINUX_PCITEST_H */ +--- a/tools/pci/pcitest.c ++++ b/tools/pci/pcitest.c +@@ -31,12 +31,17 @@ + #define BILLION 1E9 + + static char *result[] = { "NOT OKAY", "OKAY" }; ++static char *irq[] = { "LEGACY", "MSI", "MSI-X" }; + + struct pci_test { + char *device; + char barnum; + bool legacyirq; + unsigned int msinum; ++ unsigned int msixnum; ++ int irqtype; ++ bool set_irqtype; ++ bool get_irqtype; + bool read; + bool write; + bool copy; +@@ -65,6 +70,24 @@ static int run_test(struct pci_test *tes + fprintf(stdout, "%s\n", result[ret]); + } + ++ if (test->set_irqtype) { ++ ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype); ++ fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]); ++ if (ret < 0) ++ fprintf(stdout, "FAILED\n"); ++ else ++ fprintf(stdout, "%s\n", result[ret]); ++ } ++ ++ if (test->get_irqtype) { ++ ret = ioctl(fd, PCITEST_GET_IRQTYPE); ++ fprintf(stdout, "GET IRQ TYPE:\t\t"); ++ if (ret < 0) ++ fprintf(stdout, "FAILED\n"); ++ else ++ fprintf(stdout, "%s\n", irq[ret]); ++ } ++ + if (test->legacyirq) { + ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0); + fprintf(stdout, "LEGACY IRQ:\t"); +@@ -83,6 +106,15 @@ static int run_test(struct pci_test *tes + fprintf(stdout, "%s\n", result[ret]); + } + ++ if (test->msixnum > 0 && test->msixnum <= 2048) { ++ ret = ioctl(fd, PCITEST_MSIX, test->msixnum); ++ fprintf(stdout, "MSI-X%d:\t\t", test->msixnum); ++ if (ret < 0) ++ fprintf(stdout, "TEST FAILED\n"); ++ else ++ fprintf(stdout, "%s\n", result[ret]); ++ } ++ + if (test->write) { + ret = ioctl(fd, PCITEST_WRITE, test->size); + fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size); +@@ -133,7 +165,7 @@ int main(int argc, char **argv) + /* set default endpoint device */ + test->device = "/dev/pci-endpoint-test.0"; + +- while ((c = getopt(argc, argv, "D:b:m:lrwcs:")) != EOF) ++ while ((c = getopt(argc, argv, "D:b:m:x:i:Ilrwcs:")) != EOF) + switch (c) { + case 'D': + test->device = optarg; +@@ -151,6 +183,20 @@ int main(int argc, char **argv) + if (test->msinum < 1 || test->msinum > 32) + goto usage; + continue; ++ case 'x': ++ test->msixnum = atoi(optarg); ++ if (test->msixnum < 1 || test->msixnum > 2048) ++ goto usage; ++ continue; ++ case 'i': ++ test->irqtype = atoi(optarg); ++ if (test->irqtype < 0 || test->irqtype > 2) ++ goto usage; ++ test->set_irqtype = true; ++ continue; ++ case 'I': ++ test->get_irqtype = true; ++ continue; + case 'r': + test->read = true; + continue; +@@ -173,6 +219,9 @@ usage: + "\t-D PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n" + "\t-b BAR test (bar number between 0..5)\n" + "\t-m MSI test (msi number between 1..32)\n" ++ "\t-x \tMSI-X test (msix number between 1..2048)\n" ++ "\t-i \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n" ++ "\t-I Get current IRQ type configured\n" + "\t-l Legacy IRQ test\n" + "\t-r Read buffer test\n" + "\t-w Write buffer test\n" +--- a/tools/pci/pcitest.sh ++++ b/tools/pci/pcitest.sh +@@ -16,7 +16,10 @@ echo + echo "Interrupt tests" + echo + ++pcitest -i 0 + pcitest -l ++ ++pcitest -i 1 + msi=1 + + while [ $msi -lt 33 ] +@@ -26,9 +29,21 @@ do + done + echo + ++pcitest -i 2 ++msix=1 ++ ++while [ $msix -lt 2049 ] ++do ++ pcitest -x $msix ++ msix=`expr $msix + 1` ++done ++echo ++ + echo "Read Tests" + echo + ++pcitest -i 1 ++ + pcitest -r -s 1 + pcitest -r -s 1024 + pcitest -r -s 1025 diff --git a/target/linux/layerscape/patches-4.14/818-qspi-support-layerscape.patch b/target/linux/layerscape/patches-4.14/818-qspi-support-layerscape.patch index b74c82ba02..744245499f 100644 --- a/target/linux/layerscape/patches-4.14/818-qspi-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/818-qspi-support-layerscape.patch @@ -1,68 +1,26 @@ -From 60eee49f37b77bc2d5f46c5db5a5c24d0c31bd02 Mon Sep 17 00:00:00 2001 +From fe21ef44284a3aa6fd80448e4ab2e1e8a55fb926 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 20 Nov 2018 15:36:57 +0800 +Date: Wed, 17 Apr 2019 18:58:59 +0800 Subject: [PATCH] qspi: support layerscape This is an integrated patch of qspi for layerscape Signed-off-by: Abhimanyu Saini +Signed-off-by: Biwen Li +Signed-off-by: Chuanhua Han Signed-off-by: Cyrille Pitchen +Signed-off-by: Mark Brown Signed-off-by: Neil Armstrong Signed-off-by: Prabhakar Kushwaha Signed-off-by: Suresh Gupta -Signed-off-by: Yogesh Gaur -Signed-off-by: Biwen Li Signed-off-by: Yangbo Lu +Signed-off-by: Yogesh Gaur --- - .../devicetree/bindings/mtd/fsl-quadspi.txt | 31 ++ - drivers/mtd/spi-nor/fsl-quadspi.c | 444 +++++++++++------- - drivers/mtd/spi-nor/spi-nor.c | 5 + - 3 files changed, 320 insertions(+), 160 deletions(-) + drivers/mtd/spi-nor/fsl-quadspi.c | 444 +++++++++++++++++++----------- + drivers/mtd/spi-nor/spi-nor.c | 5 + + drivers/spi/spi-fsl-dspi.c | 4 +- + 3 files changed, 291 insertions(+), 162 deletions(-) ---- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt -+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt -@@ -7,6 +7,7 @@ Required properties: - or - "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi", - "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi" -+ "fsl,ls2080a-qspi" followed by "fsl,ls1088a-qspi", - - reg : the first contains the register location and length, - the second contains the memory mapping address and length - - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory" -@@ -39,3 +40,33 @@ qspi0: quadspi@40044000 { - .... - }; - }; -+ -+qspi1: quadspi@20c0000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x0 0x20c0000 0x0 0x10000>, -+ <0x0 0x20000000 0x0 0x10000000>; -+ reg-names = "QuadSPI", "QuadSPI-memory"; -+ interrupts = <0 25 0x4>; /* Level high type */ -+ clocks = <&clockgen 4 3>, <&clockgen 4 3>; -+ clock-names = "qspi_en", "qspi"; -+ status = "okay"; -+ -+ qflash0: s25fs512s@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <20000000>; -+ reg = <0>; -+ spi-rx-bus-width = <4>; -+ spi-tx-bus-width = <4>; -+ }; -+ -+ qflash1: s25fs512s@1 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <20000000>; -+ reg = <1>; -+ spi-rx-bus-width = <4>; -+ spi-tx-bus-width = <4>; -+ }; -+}; --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -41,6 +41,7 @@ @@ -760,7 +718,7 @@ Signed-off-by: Yangbo Lu --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1147,6 +1147,11 @@ static const struct flash_info spi_nor_i +@@ -1154,6 +1154,11 @@ static const struct flash_info spi_nor_i { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) }, { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, @@ -772,3 +730,16 @@ Signed-off-by: Yangbo Lu { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) }, { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) }, +--- a/drivers/spi/spi-fsl-dspi.c ++++ b/drivers/spi/spi-fsl-dspi.c +@@ -1024,8 +1024,8 @@ static int dspi_probe(struct platform_de + goto out_clk_put; + } + +- ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0, +- pdev->name, dspi); ++ ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, ++ IRQF_SHARED, pdev->name, dspi); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n"); + goto out_clk_put; diff --git a/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch b/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch index f5fc0545be..b41fdca03c 100644 --- a/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/819-sdhc-support-layerscape.patch @@ -1,18 +1,75 @@ -From f901f791d07deaeba6310ac070769575a0bb790a Mon Sep 17 00:00:00 2001 +From 6ca94d2e7dc72b21703e6d9be4e8ec3ad4a26f41 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:27:54 +0800 -Subject: [PATCH 36/40] sdhc: support layerscape +Date: Wed, 17 Apr 2019 18:59:02 +0800 +Subject: [PATCH] sdhc: support layerscape + This is an integrated patch of sdhc for layerscape -Signed-off-by: Yinbo Zhu Signed-off-by: Biwen Li +Signed-off-by: Mathew McBride +Signed-off-by: Ulf Hansson +Signed-off-by: Yangbo Lu +Signed-off-by: Yinbo Zhu --- - drivers/mmc/host/sdhci-of-esdhc.c | 85 +++++++++++++++++++++---------- - 1 file changed, 57 insertions(+), 28 deletions(-) + drivers/mmc/core/mmc.c | 3 + + drivers/mmc/host/sdhci-esdhc.h | 25 +++ + drivers/mmc/host/sdhci-of-esdhc.c | 270 ++++++++++++++++++++++++++---- + drivers/mmc/host/sdhci.c | 9 +- + drivers/mmc/host/sdhci.h | 1 + + include/linux/mmc/card.h | 1 + + include/linux/mmc/host.h | 2 + + 7 files changed, 272 insertions(+), 39 deletions(-) +--- a/drivers/mmc/core/mmc.c ++++ b/drivers/mmc/core/mmc.c +@@ -1174,6 +1174,9 @@ static int mmc_select_hs400(struct mmc_c + goto out_err; + + /* Switch card to DDR */ ++ if (host->ops->prepare_ddr_to_hs400) ++ host->ops->prepare_ddr_to_hs400(host); ++ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + EXT_CSD_DDR_BUS_WIDTH_8, +--- a/drivers/mmc/host/sdhci-esdhc.h ++++ b/drivers/mmc/host/sdhci-esdhc.h +@@ -59,7 +59,32 @@ + + /* Tuning Block Control Register */ + #define ESDHC_TBCTL 0x120 ++#define ESDHC_HS400_WNDW_ADJUST 0x00000040 ++#define ESDHC_HS400_MODE 0x00000010 + #define ESDHC_TB_EN 0x00000004 ++#define ESDHC_TBPTR 0x128 ++ ++/* SD Clock Control Register */ ++#define ESDHC_SDCLKCTL 0x144 ++#define ESDHC_LPBK_CLK_SEL 0x80000000 ++#define ESDHC_CMD_CLK_CTL 0x00008000 ++ ++/* SD Timing Control Register */ ++#define ESDHC_SDTIMNGCTL 0x148 ++#define ESDHC_FLW_CTL_BG 0x00008000 ++ ++/* DLL Config 0 Register */ ++#define ESDHC_DLLCFG0 0x160 ++#define ESDHC_DLL_ENABLE 0x80000000 ++#define ESDHC_DLL_FREQ_SEL 0x08000000 ++ ++/* DLL Config 1 Register */ ++#define ESDHC_DLLCFG1 0x164 ++#define ESDHC_DLL_PD_PULSE_STRETCH_SEL 0x80000000 ++ ++/* DLL Status 0 Register */ ++#define ESDHC_DLLSTAT0 0x170 ++#define ESDHC_DLL_STS_SLV_LOCK 0x08000000 + + /* Control Register for DMA transfer */ + #define ESDHC_DMA_SYSCTL 0x40c --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c -@@ -30,11 +30,56 @@ +@@ -30,11 +30,61 @@ #define VENDOR_V_22 0x12 #define VENDOR_V_23 0x13 @@ -64,20 +121,38 @@ Signed-off-by: Biwen Li u8 vendor_ver; u8 spec_ver; bool quirk_incorrect_hostver; ++ bool quirk_limited_clk_division; ++ bool quirk_unreliable_pulse_detection; ++ bool quirk_fixup_tuning; ++ bool quirk_incorrect_delay_chain; unsigned int peripheral_clock; + const struct esdhc_clk_fixup *clk_fixup; ++ u32 div_ratio; }; /** -@@ -502,6 +547,7 @@ static void esdhc_of_set_clock(struct sd +@@ -495,13 +545,20 @@ static void esdhc_clock_enable(struct sd + } + } + ++static struct soc_device_attribute soc_incorrect_delay_chain[] = { ++ { .family = "QorIQ LX2160A", .revision = "1.0", }, ++ { }, ++}; ++ + static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) + { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); int pre_div = 1; int div = 1; ++ int division; ktime_t timeout; + long fixup = 0; u32 temp; host->mmc->actual_clock = 0; -@@ -515,27 +561,14 @@ static void esdhc_of_set_clock(struct sd +@@ -515,27 +572,14 @@ static void esdhc_of_set_clock(struct sd if (esdhc->vendor_ver < VENDOR_V_23) pre_div = 2; @@ -112,25 +187,300 @@ Signed-off-by: Biwen Li temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | -@@ -800,6 +833,7 @@ static struct soc_device_attribute soc_i +@@ -548,9 +592,30 @@ static void esdhc_of_set_clock(struct sd + while (host->max_clk / pre_div / div > clock && div < 16) + div++; + ++ if (esdhc->quirk_limited_clk_division && ++ clock == MMC_HS200_MAX_DTR && ++ (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 || ++ host->flags & SDHCI_HS400_TUNING)) { ++ division = pre_div * div; ++ if (division <= 4) { ++ pre_div = 4; ++ div = 1; ++ } else if (division <= 8) { ++ pre_div = 4; ++ div = 2; ++ } else if (division <= 12) { ++ pre_div = 4; ++ div = 3; ++ } else { ++ pr_warn("%s: using upsupported clock division.\n", ++ mmc_hostname(host->mmc)); ++ } ++ } ++ + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", + clock, host->max_clk / pre_div / div); + host->mmc->actual_clock = host->max_clk / pre_div / div; ++ esdhc->div_ratio = pre_div * div; + pre_div >>= 1; + div--; + +@@ -560,6 +625,29 @@ static void esdhc_of_set_clock(struct sd + | (pre_div << ESDHC_PREDIV_SHIFT)); + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + ++ if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 && ++ clock == MMC_HS200_MAX_DTR) { ++ temp = sdhci_readl(host, ESDHC_TBCTL); ++ sdhci_writel(host, temp | ESDHC_HS400_MODE, ESDHC_TBCTL); ++ temp = sdhci_readl(host, ESDHC_SDCLKCTL); ++ sdhci_writel(host, temp | ESDHC_CMD_CLK_CTL, ESDHC_SDCLKCTL); ++ esdhc_clock_enable(host, true); ++ ++ temp = sdhci_readl(host, ESDHC_DLLCFG0); ++ temp |= ESDHC_DLL_ENABLE; ++ if (host->mmc->actual_clock == MMC_HS200_MAX_DTR || ++ esdhc->quirk_incorrect_delay_chain == false) ++ temp |= ESDHC_DLL_FREQ_SEL; ++ sdhci_writel(host, temp, ESDHC_DLLCFG0); ++ temp = sdhci_readl(host, ESDHC_TBCTL); ++ sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL); ++ ++ esdhc_clock_enable(host, false); ++ temp = sdhci_readl(host, ESDHC_DMA_SYSCTL); ++ temp |= ESDHC_FLUSH_ASYNC_FIFO; ++ sdhci_writel(host, temp, ESDHC_DMA_SYSCTL); ++ } ++ + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + while (1) { +@@ -575,6 +663,7 @@ static void esdhc_of_set_clock(struct sd + udelay(10); + } + ++ temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); + temp |= ESDHC_CLOCK_SDCLKEN; + sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + } +@@ -603,6 +692,8 @@ static void esdhc_pltfm_set_bus_width(st + + static void esdhc_reset(struct sdhci_host *host, u8 mask) + { ++ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); ++ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u32 val; + + sdhci_reset(host, mask); +@@ -617,6 +708,12 @@ static void esdhc_reset(struct sdhci_hos + val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~ESDHC_TB_EN; + sdhci_writel(host, val, ESDHC_TBCTL); ++ ++ if (esdhc->quirk_unreliable_pulse_detection) { ++ val = sdhci_readl(host, ESDHC_DLLCFG1); ++ val &= ~ESDHC_DLL_PD_PULSE_STRETCH_SEL; ++ sdhci_writel(host, val, ESDHC_DLLCFG1); ++ } + } + } + +@@ -628,6 +725,7 @@ static void esdhc_reset(struct sdhci_hos + static const struct of_device_id scfg_device_ids[] = { + { .compatible = "fsl,t1040-scfg", }, + { .compatible = "fsl,ls1012a-scfg", }, ++ { .compatible = "fsl,ls1043a-scfg", }, + { .compatible = "fsl,ls1046a-scfg", }, + {} + }; +@@ -690,23 +788,91 @@ static int esdhc_signal_voltage_switch(s + } + } + +-static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) ++static struct soc_device_attribute soc_fixup_tuning[] = { ++ { .family = "QorIQ T1040", .revision = "1.0", }, ++ { .family = "QorIQ T2080", .revision = "1.0", }, ++ { .family = "QorIQ T1023", .revision = "1.0", }, ++ { .family = "QorIQ LS1021A", .revision = "1.0", }, ++ { .family = "QorIQ LS1080A", .revision = "1.0", }, ++ { .family = "QorIQ LS2080A", .revision = "1.0", }, ++ { .family = "QorIQ LS1012A", .revision = "1.0", }, ++ { .family = "QorIQ LS1043A", .revision = "1.*", }, ++ { .family = "QorIQ LS1046A", .revision = "1.0", }, ++ { }, ++}; ++ ++static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) + { +- struct sdhci_host *host = mmc_priv(mmc); + u32 val; + +- /* Use tuning block for tuning procedure */ + esdhc_clock_enable(host, false); ++ + val = sdhci_readl(host, ESDHC_DMA_SYSCTL); + val |= ESDHC_FLUSH_ASYNC_FIFO; + sdhci_writel(host, val, ESDHC_DMA_SYSCTL); + + val = sdhci_readl(host, ESDHC_TBCTL); +- val |= ESDHC_TB_EN; ++ if (enable) ++ val |= ESDHC_TB_EN; ++ else ++ val &= ~ESDHC_TB_EN; + sdhci_writel(host, val, ESDHC_TBCTL); ++ + esdhc_clock_enable(host, true); ++} ++ ++static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) ++{ ++ struct sdhci_host *host = mmc_priv(mmc); ++ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); ++ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); ++ bool hs400_tuning; ++ u32 val; ++ int ret; ++ ++ if (esdhc->quirk_limited_clk_division && ++ host->flags & SDHCI_HS400_TUNING) ++ esdhc_of_set_clock(host, host->clock); ++ ++ esdhc_tuning_block_enable(host, true); ++ ++ hs400_tuning = host->flags & SDHCI_HS400_TUNING; ++ ret = sdhci_execute_tuning(mmc, opcode); ++ ++ if (hs400_tuning) { ++ val = sdhci_readl(host, ESDHC_SDTIMNGCTL); ++ val |= ESDHC_FLW_CTL_BG; ++ sdhci_writel(host, val, ESDHC_SDTIMNGCTL); ++ } + +- return sdhci_execute_tuning(mmc, opcode); ++ if (host->tuning_err == -EAGAIN && esdhc->quirk_fixup_tuning) { ++ ++ /* program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and ++ * program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO ++ */ ++ val = sdhci_readl(host, ESDHC_TBPTR); ++ val = (val & ~((0x7f << 8) | 0x7f)) | ++ (3 * esdhc->div_ratio) | ((5 * esdhc->div_ratio) << 8); ++ sdhci_writel(host, val, ESDHC_TBPTR); ++ ++ /* program the software tuning mode by setting ++ * TBCTL[TB_MODE]=2'h3 ++ */ ++ val = sdhci_readl(host, ESDHC_TBCTL); ++ val |= 0x3; ++ sdhci_writel(host, val, ESDHC_TBCTL); ++ sdhci_execute_tuning(mmc, opcode); ++ } ++ return ret; ++} ++ ++static void esdhc_set_uhs_signaling(struct sdhci_host *host, ++ unsigned int timing) ++{ ++ if (timing == MMC_TIMING_MMC_HS400) ++ esdhc_tuning_block_enable(host, true); ++ else ++ sdhci_set_uhs_signaling(host, timing); + } + + #ifdef CONFIG_PM_SLEEP +@@ -755,7 +921,7 @@ static const struct sdhci_ops sdhci_esdh + .adma_workaround = esdhc_of_adma_workaround, + .set_bus_width = esdhc_pltfm_set_bus_width, + .reset = esdhc_reset, +- .set_uhs_signaling = sdhci_set_uhs_signaling, ++ .set_uhs_signaling = esdhc_set_uhs_signaling, + }; + + static const struct sdhci_ops sdhci_esdhc_le_ops = { +@@ -772,7 +938,7 @@ static const struct sdhci_ops sdhci_esdh + .adma_workaround = esdhc_of_adma_workaround, + .set_bus_width = esdhc_pltfm_set_bus_width, + .reset = esdhc_reset, +- .set_uhs_signaling = sdhci_set_uhs_signaling, ++ .set_uhs_signaling = esdhc_set_uhs_signaling, + }; + + static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = { +@@ -798,8 +964,20 @@ static struct soc_device_attribute soc_i + { }, + }; ++static struct soc_device_attribute soc_fixup_sdhc_clkdivs[] = { ++ { .family = "QorIQ LX2160A", .revision = "1.0", }, ++ { .family = "QorIQ LX2160A", .revision = "2.0", }, ++ { }, ++}; ++ ++static struct soc_device_attribute soc_unreliable_pulse_detection[] = { ++ { .family = "QorIQ LX2160A", .revision = "1.0", }, ++ { }, ++}; ++ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) { + const struct of_device_id *match; struct sdhci_pltfm_host *pltfm_host; struct sdhci_esdhc *esdhc; struct device_node *np; -@@ -819,6 +853,9 @@ static void esdhc_init(struct platform_d +@@ -819,6 +997,24 @@ static void esdhc_init(struct platform_d else esdhc->quirk_incorrect_hostver = false; ++ if (soc_device_match(soc_fixup_sdhc_clkdivs)) ++ esdhc->quirk_limited_clk_division = true; ++ else ++ esdhc->quirk_limited_clk_division = false; ++ ++ if (soc_device_match(soc_unreliable_pulse_detection)) ++ esdhc->quirk_unreliable_pulse_detection = true; ++ else ++ esdhc->quirk_unreliable_pulse_detection = false; ++ ++ if (soc_device_match(soc_incorrect_delay_chain)) ++ esdhc->quirk_incorrect_delay_chain = true; ++ else ++ esdhc->quirk_incorrect_delay_chain = false; ++ + match = of_match_node(sdhci_esdhc_of_match, pdev->dev.of_node); + if (match) + esdhc->clk_fixup = match->data; np = pdev->dev.of_node; clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { -@@ -923,14 +960,6 @@ static int sdhci_esdhc_probe(struct plat +@@ -846,6 +1042,12 @@ static void esdhc_init(struct platform_d + } + } + ++static int esdhc_prepare_ddr_to_hs400(struct mmc_host *mmc) ++{ ++ esdhc_tuning_block_enable(mmc_priv(mmc), false); ++ return 0; ++} ++ + static int sdhci_esdhc_probe(struct platform_device *pdev) + { + struct sdhci_host *host; +@@ -869,6 +1071,7 @@ static int sdhci_esdhc_probe(struct plat + host->mmc_host_ops.start_signal_voltage_switch = + esdhc_signal_voltage_switch; + host->mmc_host_ops.execute_tuning = esdhc_execute_tuning; ++ host->mmc_host_ops.prepare_ddr_to_hs400 = esdhc_prepare_ddr_to_hs400; + host->tuning_delay = 1; + + esdhc_init(pdev, host); +@@ -877,6 +1080,11 @@ static int sdhci_esdhc_probe(struct plat + + pltfm_host = sdhci_priv(host); + esdhc = sdhci_pltfm_priv(pltfm_host); ++ if (soc_device_match(soc_fixup_tuning)) ++ esdhc->quirk_fixup_tuning = true; ++ else ++ esdhc->quirk_fixup_tuning = false; ++ + if (esdhc->vendor_ver == VENDOR_V_22) + host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; + +@@ -923,14 +1131,6 @@ static int sdhci_esdhc_probe(struct plat return ret; } @@ -145,3 +495,78 @@ Signed-off-by: Biwen Li static struct platform_driver sdhci_esdhc_driver = { .driver = { .name = "sdhci-esdhc", +--- a/drivers/mmc/host/sdhci.c ++++ b/drivers/mmc/host/sdhci.c +@@ -2148,7 +2148,7 @@ static void sdhci_send_tuning(struct sdh + + } + +-static void __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) ++static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) + { + int i; + +@@ -2165,13 +2165,13 @@ static void __sdhci_execute_tuning(struc + pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + sdhci_abort_tuning(host, opcode); +- return; ++ return -ETIMEDOUT; + } + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { + if (ctrl & SDHCI_CTRL_TUNED_CLK) +- return; /* Success! */ ++ return 0; /* Success! */ + break; + } + +@@ -2183,6 +2183,7 @@ static void __sdhci_execute_tuning(struc + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + sdhci_reset_tuning(host); ++ return -EAGAIN; + } + + int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) +@@ -2244,7 +2245,7 @@ int sdhci_execute_tuning(struct mmc_host + + sdhci_start_tuning(host); + +- __sdhci_execute_tuning(host, opcode); ++ host->tuning_err = __sdhci_execute_tuning(host, opcode); + + sdhci_end_tuning(host); + out: +--- a/drivers/mmc/host/sdhci.h ++++ b/drivers/mmc/host/sdhci.h +@@ -545,6 +545,7 @@ struct sdhci_host { + + unsigned int tuning_count; /* Timer count for re-tuning */ + unsigned int tuning_mode; /* Re-tuning mode supported by host */ ++ unsigned int tuning_err; /* Error code for re-tuning */ + #define SDHCI_TUNING_MODE_1 0 + #define SDHCI_TUNING_MODE_2 1 + #define SDHCI_TUNING_MODE_3 2 +--- a/include/linux/mmc/card.h ++++ b/include/linux/mmc/card.h +@@ -156,6 +156,7 @@ struct sd_switch_caps { + #define UHS_DDR50_MAX_DTR 50000000 + #define UHS_SDR25_MAX_DTR UHS_DDR50_MAX_DTR + #define UHS_SDR12_MAX_DTR 25000000 ++#define DEFAULT_SPEED_MAX_DTR UHS_SDR12_MAX_DTR + unsigned int sd3_bus_mode; + #define UHS_SDR12_BUS_SPEED 0 + #define HIGH_SPEED_BUS_SPEED 1 +--- a/include/linux/mmc/host.h ++++ b/include/linux/mmc/host.h +@@ -145,6 +145,8 @@ struct mmc_host_ops { + + /* Prepare HS400 target operating frequency depending host driver */ + int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); ++ int (*prepare_ddr_to_hs400)(struct mmc_host *host); ++ + /* Prepare enhanced strobe depending host driver */ + void (*hs400_enhanced_strobe)(struct mmc_host *host, + struct mmc_ios *ios); diff --git a/target/linux/layerscape/patches-4.14/820-sec-support-layerscape.patch b/target/linux/layerscape/patches-4.14/820-sec-support-layerscape.patch index ff0fe8daa4..0d26aca797 100644 --- a/target/linux/layerscape/patches-4.14/820-sec-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/820-sec-support-layerscape.patch @@ -1,59 +1,69 @@ -From 936d5f485f2ff837cdd7d49839771bd3367e8b92 Mon Sep 17 00:00:00 2001 +From ba8e92b322a3763880fdc4d19e9c7085f5504be7 Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:28:03 +0800 -Subject: [PATCH 37/40] sec: support layerscape +Date: Tue, 23 Apr 2019 17:41:43 +0800 +Subject: [PATCH] sec: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + This is an integrated patch of sec for layerscape Signed-off-by: Alex Porosanu +Signed-off-by: Arnd Bergmann +Signed-off-by: Biwen Li +Signed-off-by: Carmen Iorga Signed-off-by: Cristian Stoica Signed-off-by: Guanhua Gao Signed-off-by: Herbert Xu Signed-off-by: Horia Geantă -Signed-off-by: Horia Geantă horia.geanta@nxp.com +Signed-off-by: Ioana Ciornei Signed-off-by: Radu Alexe Signed-off-by: Tudor Ambarus Signed-off-by: Yangbo Lu Signed-off-by: Zhao Qiang -Signed-off-by: Biwen Li --- crypto/Kconfig | 20 + crypto/Makefile | 1 + + crypto/chacha20poly1305.c | 2 - crypto/tcrypt.c | 27 +- crypto/testmgr.c | 244 ++ crypto/testmgr.h | 219 ++ - crypto/tls.c | 607 +++ + crypto/tls.c | 607 ++++ drivers/crypto/Makefile | 2 +- - drivers/crypto/caam/Kconfig | 57 +- - drivers/crypto/caam/Makefile | 10 +- - drivers/crypto/caam/caamalg.c | 131 +- - drivers/crypto/caam/caamalg_desc.c | 761 +++- - drivers/crypto/caam/caamalg_desc.h | 47 +- - drivers/crypto/caam/caamalg_qi.c | 927 ++++- - drivers/crypto/caam/caamalg_qi2.c | 5691 +++++++++++++++++++++++++++ - drivers/crypto/caam/caamalg_qi2.h | 274 ++ - drivers/crypto/caam/caamhash.c | 132 +- + drivers/crypto/caam/Kconfig | 85 +- + drivers/crypto/caam/Makefile | 26 +- + drivers/crypto/caam/caamalg.c | 468 +++- + drivers/crypto/caam/caamalg_desc.c | 903 +++++- + drivers/crypto/caam/caamalg_desc.h | 52 +- + drivers/crypto/caam/caamalg_qi.c | 1060 ++++++- + drivers/crypto/caam/caamalg_qi2.c | 5843 +++++++++++++++++++++++++++++++++++ + drivers/crypto/caam/caamalg_qi2.h | 276 ++ + drivers/crypto/caam/caamhash.c | 192 +- drivers/crypto/caam/caamhash_desc.c | 108 + drivers/crypto/caam/caamhash_desc.h | 49 + - drivers/crypto/caam/compat.h | 2 + - drivers/crypto/caam/ctrl.c | 23 +- - drivers/crypto/caam/desc.h | 62 +- - drivers/crypto/caam/desc_constr.h | 52 +- - drivers/crypto/caam/dpseci.c | 865 ++++ - drivers/crypto/caam/dpseci.h | 433 ++ + drivers/crypto/caam/caampkc.c | 52 +- + drivers/crypto/caam/caamrng.c | 52 +- + drivers/crypto/caam/compat.h | 4 + + drivers/crypto/caam/ctrl.c | 194 +- + drivers/crypto/caam/desc.h | 89 +- + drivers/crypto/caam/desc_constr.h | 59 +- + drivers/crypto/caam/dpseci.c | 865 ++++++ + drivers/crypto/caam/dpseci.h | 433 +++ drivers/crypto/caam/dpseci_cmd.h | 287 ++ - drivers/crypto/caam/error.c | 75 +- + drivers/crypto/caam/error.c | 81 +- drivers/crypto/caam/error.h | 6 +- - drivers/crypto/caam/intern.h | 1 + - drivers/crypto/caam/jr.c | 42 + + drivers/crypto/caam/intern.h | 102 +- + drivers/crypto/caam/jr.c | 84 + drivers/crypto/caam/jr.h | 2 + drivers/crypto/caam/key_gen.c | 30 - drivers/crypto/caam/key_gen.h | 30 + - drivers/crypto/caam/qi.c | 85 +- + drivers/crypto/caam/qi.c | 134 +- drivers/crypto/caam/qi.h | 2 +- - drivers/crypto/caam/regs.h | 2 + + drivers/crypto/caam/regs.h | 76 +- drivers/crypto/caam/sg_sw_qm.h | 46 +- drivers/crypto/talitos.c | 8 + - 37 files changed, 11006 insertions(+), 354 deletions(-) + include/crypto/chacha20.h | 1 + + 41 files changed, 12088 insertions(+), 733 deletions(-) create mode 100644 crypto/tls.c create mode 100644 drivers/crypto/caam/caamalg_qi2.c create mode 100644 drivers/crypto/caam/caamalg_qi2.h @@ -102,6 +112,17 @@ Signed-off-by: Biwen Li obj-$(CONFIG_CRYPTO_LZO) += lzo.o obj-$(CONFIG_CRYPTO_LZ4) += lz4.o obj-$(CONFIG_CRYPTO_LZ4HC) += lz4hc.o +--- a/crypto/chacha20poly1305.c ++++ b/crypto/chacha20poly1305.c +@@ -22,8 +22,6 @@ + + #include "internal.h" + +-#define CHACHAPOLY_IV_SIZE 12 +- + struct chachapoly_instance_ctx { + struct crypto_skcipher_spawn chacha; + struct crypto_ahash_spawn poly; --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -76,7 +76,7 @@ static char *check[] = { @@ -1316,9 +1337,15 @@ Signed-off-by: Biwen Li obj-$(CONFIG_CRYPTO_DEV_IMGTEC_HASH) += img-hash.o --- a/drivers/crypto/caam/Kconfig +++ b/drivers/crypto/caam/Kconfig -@@ -1,7 +1,11 @@ +@@ -1,7 +1,17 @@ +config CRYPTO_DEV_FSL_CAAM_COMMON + tristate ++ ++config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC ++ tristate ++ ++config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC ++ tristate + config CRYPTO_DEV_FSL_CAAM - tristate "Freescale CAAM-Multicore driver backend" @@ -1329,7 +1356,7 @@ Signed-off-by: Biwen Li help Enables the driver module for Freescale's Cryptographic Accelerator and Assurance Module (CAAM), also known as the SEC version 4 (SEC4). -@@ -12,9 +16,16 @@ config CRYPTO_DEV_FSL_CAAM +@@ -12,9 +22,16 @@ config CRYPTO_DEV_FSL_CAAM To compile this driver as a module, choose M here: the module will be called caam. @@ -1347,7 +1374,7 @@ Signed-off-by: Biwen Li default y help Enables the driver module for Job Rings which are part of -@@ -25,9 +36,10 @@ config CRYPTO_DEV_FSL_CAAM_JR +@@ -25,9 +42,10 @@ config CRYPTO_DEV_FSL_CAAM_JR To compile this driver as a module, choose M here: the module will be called caam_jr. @@ -1359,7 +1386,7 @@ Signed-off-by: Biwen Li range 2 9 default "9" help -@@ -45,7 +57,6 @@ config CRYPTO_DEV_FSL_CAAM_RINGSIZE +@@ -45,7 +63,6 @@ config CRYPTO_DEV_FSL_CAAM_RINGSIZE config CRYPTO_DEV_FSL_CAAM_INTC bool "Job Ring interrupt coalescing" @@ -1367,50 +1394,83 @@ Signed-off-by: Biwen Li help Enable the Job Ring's interrupt coalescing feature. -@@ -75,7 +86,6 @@ config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THL +@@ -74,9 +91,9 @@ config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THL + threshold. Range is 1-65535. config CRYPTO_DEV_FSL_CAAM_CRYPTO_API - tristate "Register algorithm implementations with the Crypto API" +- tristate "Register algorithm implementations with the Crypto API" - depends on CRYPTO_DEV_FSL_CAAM_JR ++ bool "Register algorithm implementations with the Crypto API" default y ++ select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC select CRYPTO_AEAD select CRYPTO_AUTHENC -@@ -90,7 +100,7 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API + select CRYPTO_BLKCIPHER +@@ -85,13 +102,11 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API + scatterlist crypto API (such as the linux native IPSec + stack) to the SEC4 via job ring. +- To compile this as a module, choose M here: the module +- will be called caamalg. +- config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI - tristate "Queue Interface as Crypto API backend" +- tristate "Queue Interface as Crypto API backend" - depends on CRYPTO_DEV_FSL_CAAM_JR && FSL_DPAA && NET ++ bool "Queue Interface as Crypto API backend" + depends on FSL_SDK_DPA && NET default y ++ select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC select CRYPTO_AUTHENC select CRYPTO_BLKCIPHER -@@ -107,7 +117,6 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI + help +@@ -102,36 +117,26 @@ config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI + assigned to the kernel should also be more than the number of + job rings. +- To compile this as a module, choose M here: the module +- will be called caamalg_qi. +- config CRYPTO_DEV_FSL_CAAM_AHASH_API - tristate "Register hash algorithm implementations with Crypto API" +- tristate "Register hash algorithm implementations with Crypto API" - depends on CRYPTO_DEV_FSL_CAAM_JR ++ bool "Register hash algorithm implementations with Crypto API" default y ++ select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC select CRYPTO_HASH help -@@ -119,7 +128,6 @@ config CRYPTO_DEV_FSL_CAAM_AHASH_API + Selecting this will offload ahash for users of the + scatterlist crypto API to the SEC4 via job ring. +- To compile this as a module, choose M here: the module +- will be called caamhash. +- config CRYPTO_DEV_FSL_CAAM_PKC_API - tristate "Register public key cryptography implementations with Crypto API" +- tristate "Register public key cryptography implementations with Crypto API" - depends on CRYPTO_DEV_FSL_CAAM_JR ++ bool "Register public key cryptography implementations with Crypto API" default y select CRYPTO_RSA help -@@ -131,7 +139,6 @@ config CRYPTO_DEV_FSL_CAAM_PKC_API + Selecting this will allow SEC Public key support for RSA. + Supported cryptographic primitives: encryption, decryption, + signature and verification. +- To compile this as a module, choose M here: the module +- will be called caam_pkc. config CRYPTO_DEV_FSL_CAAM_RNG_API - tristate "Register caam device for hwrng API" +- tristate "Register caam device for hwrng API" - depends on CRYPTO_DEV_FSL_CAAM_JR ++ bool "Register caam device for hwrng API" default y select CRYPTO_RNG select HW_RANDOM -@@ -142,13 +149,31 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API - To compile this as a module, choose M here: the module - will be called caamrng. +@@ -139,16 +144,24 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API + Selecting this will register the SEC4 hardware rng to + the hw_random API for suppying the kernel entropy pool. + +- To compile this as a module, choose M here: the module +- will be called caamrng. ++endif # CRYPTO_DEV_FSL_CAAM_JR -config CRYPTO_DEV_FSL_CAAM_DEBUG - bool "Enable debug output in CAAM driver" @@ -1418,14 +1478,17 @@ Signed-off-by: Biwen Li - help - Selecting this will enable printing of various debug - information in the CAAM driver. -+endif # CRYPTO_DEV_FSL_CAAM_JR -+ +endif # CRYPTO_DEV_FSL_CAAM -+ + +-config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC +- def_tristate (CRYPTO_DEV_FSL_CAAM_CRYPTO_API || \ +- CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) +config CRYPTO_DEV_FSL_DPAA2_CAAM + tristate "QorIQ DPAA2 CAAM (DPSECI) driver" + depends on FSL_MC_DPIO + select CRYPTO_DEV_FSL_CAAM_COMMON ++ select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC ++ select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC + select CRYPTO_BLKCIPHER + select CRYPTO_AUTHENC + select CRYPTO_AEAD @@ -1437,16 +1500,6 @@ Signed-off-by: Biwen Li + + To compile this as a module, choose M here: the module + will be called dpaa2_caam. - - config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC - def_tristate (CRYPTO_DEV_FSL_CAAM_CRYPTO_API || \ -- CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) -+ CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI || \ -+ CRYPTO_DEV_FSL_DPAA2_CAAM) -+ -+config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC -+ def_tristate (CRYPTO_DEV_FSL_CAAM_AHASH_API || \ -+ CRYPTO_DEV_FSL_DPAA2_CAAM) --- a/drivers/crypto/caam/Makefile +++ b/drivers/crypto/caam/Makefile @@ -6,19 +6,27 @@ ifeq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG @@ -1458,21 +1511,30 @@ Signed-off-by: Biwen Li +obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON) += error.o obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o - obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o - obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o +-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o +-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC) += caamalg_desc.o - obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o -+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC) += caamhash_desc.o - obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o - obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caam_pkc.o - - caam-objs := ctrl.o +-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o +-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o +-obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caam_pkc.o +- +-caam-objs := ctrl.o -caam_jr-objs := jr.o key_gen.o error.o -+caam_jr-objs := jr.o key_gen.o - caam_pkc-y := caampkc.o pkc_desc.o +-caam_pkc-y := caampkc.o pkc_desc.o ++obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC) += caamhash_desc.o ++ ++caam-y := ctrl.o ++caam_jr-y := jr.o key_gen.o ++caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o ++caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o ++caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o ++caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o ++caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o ++ ++caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),) ccflags-y += -DCONFIG_CAAM_QI - caam-objs += qi.o +- caam-objs += qi.o endif + +obj-$(CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM) += dpaa2_caam.o @@ -1480,7 +1542,16 @@ Signed-off-by: Biwen Li +dpaa2_caam-y := caamalg_qi2.o dpseci.o --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c -@@ -108,6 +108,7 @@ struct caam_ctx { +@@ -71,6 +71,8 @@ + #define AUTHENC_DESC_JOB_IO_LEN (AEAD_DESC_JOB_IO_LEN + \ + CAAM_CMD_SZ * 5) + ++#define CHACHAPOLY_DESC_JOB_IO_LEN (AEAD_DESC_JOB_IO_LEN + CAAM_CMD_SZ * 6) ++ + #define DESC_MAX_USED_BYTES (CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN) + #define DESC_MAX_USED_LEN (DESC_MAX_USED_BYTES / CAAM_CMD_SZ) + +@@ -108,6 +110,7 @@ struct caam_ctx { dma_addr_t sh_desc_dec_dma; dma_addr_t sh_desc_givenc_dma; dma_addr_t key_dma; @@ -1488,7 +1559,7 @@ Signed-off-by: Biwen Li struct device *jrdev; struct alginfo adata; struct alginfo cdata; -@@ -118,6 +119,7 @@ static int aead_null_set_sh_desc(struct +@@ -118,6 +121,7 @@ static int aead_null_set_sh_desc(struct { struct caam_ctx *ctx = crypto_aead_ctx(aead); struct device *jrdev = ctx->jrdev; @@ -1496,7 +1567,7 @@ Signed-off-by: Biwen Li u32 *desc; int rem_bytes = CAAM_DESC_BYTES_MAX - AEAD_DESC_JOB_IO_LEN - ctx->adata.keylen_pad; -@@ -136,9 +138,10 @@ static int aead_null_set_sh_desc(struct +@@ -136,9 +140,10 @@ static int aead_null_set_sh_desc(struct /* aead_encrypt shared descriptor */ desc = ctx->sh_desc_enc; @@ -1509,7 +1580,7 @@ Signed-off-by: Biwen Li /* * Job Descriptor and Shared Descriptors -@@ -154,9 +157,10 @@ static int aead_null_set_sh_desc(struct +@@ -154,9 +159,10 @@ static int aead_null_set_sh_desc(struct /* aead_decrypt shared descriptor */ desc = ctx->sh_desc_dec; @@ -1522,7 +1593,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -168,6 +172,7 @@ static int aead_set_sh_desc(struct crypt +@@ -168,6 +174,7 @@ static int aead_set_sh_desc(struct crypt unsigned int ivsize = crypto_aead_ivsize(aead); struct caam_ctx *ctx = crypto_aead_ctx(aead); struct device *jrdev = ctx->jrdev; @@ -1530,7 +1601,7 @@ Signed-off-by: Biwen Li u32 ctx1_iv_off = 0; u32 *desc, *nonce = NULL; u32 inl_mask; -@@ -234,9 +239,9 @@ static int aead_set_sh_desc(struct crypt +@@ -234,9 +241,9 @@ static int aead_set_sh_desc(struct crypt desc = ctx->sh_desc_enc; cnstr_shdsc_aead_encap(desc, &ctx->cdata, &ctx->adata, ivsize, ctx->authsize, is_rfc3686, nonce, ctx1_iv_off, @@ -1542,7 +1613,7 @@ Signed-off-by: Biwen Li skip_enc: /* -@@ -266,9 +271,9 @@ skip_enc: +@@ -266,9 +273,9 @@ skip_enc: desc = ctx->sh_desc_dec; cnstr_shdsc_aead_decap(desc, &ctx->cdata, &ctx->adata, ivsize, ctx->authsize, alg->caam.geniv, is_rfc3686, @@ -1554,7 +1625,7 @@ Signed-off-by: Biwen Li if (!alg->caam.geniv) goto skip_givenc; -@@ -300,9 +305,9 @@ skip_enc: +@@ -300,9 +307,9 @@ skip_enc: desc = ctx->sh_desc_enc; cnstr_shdsc_aead_givencap(desc, &ctx->cdata, &ctx->adata, ivsize, ctx->authsize, is_rfc3686, nonce, @@ -1566,7 +1637,7 @@ Signed-off-by: Biwen Li skip_givenc: return 0; -@@ -323,6 +328,7 @@ static int gcm_set_sh_desc(struct crypto +@@ -323,6 +330,7 @@ static int gcm_set_sh_desc(struct crypto { struct caam_ctx *ctx = crypto_aead_ctx(aead); struct device *jrdev = ctx->jrdev; @@ -1574,7 +1645,7 @@ Signed-off-by: Biwen Li u32 *desc; int rem_bytes = CAAM_DESC_BYTES_MAX - GCM_DESC_JOB_IO_LEN - ctx->cdata.keylen; -@@ -344,9 +350,9 @@ static int gcm_set_sh_desc(struct crypto +@@ -344,9 +352,9 @@ static int gcm_set_sh_desc(struct crypto } desc = ctx->sh_desc_enc; @@ -1586,7 +1657,7 @@ Signed-off-by: Biwen Li /* * Job Descriptor and Shared Descriptors -@@ -361,9 +367,9 @@ static int gcm_set_sh_desc(struct crypto +@@ -361,9 +369,9 @@ static int gcm_set_sh_desc(struct crypto } desc = ctx->sh_desc_dec; @@ -1598,7 +1669,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -382,6 +388,7 @@ static int rfc4106_set_sh_desc(struct cr +@@ -382,6 +390,7 @@ static int rfc4106_set_sh_desc(struct cr { struct caam_ctx *ctx = crypto_aead_ctx(aead); struct device *jrdev = ctx->jrdev; @@ -1606,7 +1677,7 @@ Signed-off-by: Biwen Li u32 *desc; int rem_bytes = CAAM_DESC_BYTES_MAX - GCM_DESC_JOB_IO_LEN - ctx->cdata.keylen; -@@ -403,9 +410,10 @@ static int rfc4106_set_sh_desc(struct cr +@@ -403,9 +412,10 @@ static int rfc4106_set_sh_desc(struct cr } desc = ctx->sh_desc_enc; @@ -1619,7 +1690,7 @@ Signed-off-by: Biwen Li /* * Job Descriptor and Shared Descriptors -@@ -420,9 +428,10 @@ static int rfc4106_set_sh_desc(struct cr +@@ -420,9 +430,10 @@ static int rfc4106_set_sh_desc(struct cr } desc = ctx->sh_desc_dec; @@ -1632,7 +1703,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -442,6 +451,7 @@ static int rfc4543_set_sh_desc(struct cr +@@ -442,6 +453,7 @@ static int rfc4543_set_sh_desc(struct cr { struct caam_ctx *ctx = crypto_aead_ctx(aead); struct device *jrdev = ctx->jrdev; @@ -1640,7 +1711,7 @@ Signed-off-by: Biwen Li u32 *desc; int rem_bytes = CAAM_DESC_BYTES_MAX - GCM_DESC_JOB_IO_LEN - ctx->cdata.keylen; -@@ -463,9 +473,10 @@ static int rfc4543_set_sh_desc(struct cr +@@ -463,9 +475,10 @@ static int rfc4543_set_sh_desc(struct cr } desc = ctx->sh_desc_enc; @@ -1653,7 +1724,7 @@ Signed-off-by: Biwen Li /* * Job Descriptor and Shared Descriptors -@@ -480,9 +491,10 @@ static int rfc4543_set_sh_desc(struct cr +@@ -480,9 +493,10 @@ static int rfc4543_set_sh_desc(struct cr } desc = ctx->sh_desc_dec; @@ -1666,7 +1737,67 @@ Signed-off-by: Biwen Li return 0; } -@@ -503,6 +515,7 @@ static int aead_setkey(struct crypto_aea +@@ -498,11 +512,67 @@ static int rfc4543_setauthsize(struct cr + return 0; + } + ++static int chachapoly_set_sh_desc(struct crypto_aead *aead) ++{ ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ struct device *jrdev = ctx->jrdev; ++ unsigned int ivsize = crypto_aead_ivsize(aead); ++ u32 *desc; ++ ++ if (!ctx->cdata.keylen || !ctx->authsize) ++ return 0; ++ ++ desc = ctx->sh_desc_enc; ++ cnstr_shdsc_chachapoly(desc, &ctx->cdata, &ctx->adata, ivsize, ++ ctx->authsize, true, false); ++ dma_sync_single_for_device(jrdev, ctx->sh_desc_enc_dma, ++ desc_bytes(desc), ctx->dir); ++ ++ desc = ctx->sh_desc_dec; ++ cnstr_shdsc_chachapoly(desc, &ctx->cdata, &ctx->adata, ivsize, ++ ctx->authsize, false, false); ++ dma_sync_single_for_device(jrdev, ctx->sh_desc_dec_dma, ++ desc_bytes(desc), ctx->dir); ++ ++ return 0; ++} ++ ++static int chachapoly_setauthsize(struct crypto_aead *aead, ++ unsigned int authsize) ++{ ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ ++ if (authsize != POLY1305_DIGEST_SIZE) ++ return -EINVAL; ++ ++ ctx->authsize = authsize; ++ return chachapoly_set_sh_desc(aead); ++} ++ ++static int chachapoly_setkey(struct crypto_aead *aead, const u8 *key, ++ unsigned int keylen) ++{ ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ unsigned int ivsize = crypto_aead_ivsize(aead); ++ unsigned int saltlen = CHACHAPOLY_IV_SIZE - ivsize; ++ ++ if (keylen != CHACHA20_KEY_SIZE + saltlen) { ++ crypto_aead_set_flags(aead, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ ++ ctx->cdata.key_virt = key; ++ ctx->cdata.keylen = keylen - saltlen; ++ ++ return chachapoly_set_sh_desc(aead); ++} ++ + static int aead_setkey(struct crypto_aead *aead, + const u8 *key, unsigned int keylen) { struct caam_ctx *ctx = crypto_aead_ctx(aead); struct device *jrdev = ctx->jrdev; @@ -1674,7 +1805,7 @@ Signed-off-by: Biwen Li struct crypto_authenc_keys keys; int ret = 0; -@@ -517,6 +530,27 @@ static int aead_setkey(struct crypto_aea +@@ -517,6 +587,27 @@ static int aead_setkey(struct crypto_aea DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1); #endif @@ -1702,7 +1833,7 @@ Signed-off-by: Biwen Li ret = gen_split_key(ctx->jrdev, ctx->key, &ctx->adata, keys.authkey, keys.authkeylen, CAAM_MAX_KEY_SIZE - keys.enckeylen); -@@ -527,12 +561,14 @@ static int aead_setkey(struct crypto_aea +@@ -527,12 +618,14 @@ static int aead_setkey(struct crypto_aea /* postpend encryption key to auth split key */ memcpy(ctx->key + ctx->adata.keylen_pad, keys.enckey, keys.enckeylen); dma_sync_single_for_device(jrdev, ctx->key_dma, ctx->adata.keylen_pad + @@ -1718,7 +1849,7 @@ Signed-off-by: Biwen Li ctx->cdata.keylen = keys.enckeylen; return aead_set_sh_desc(aead); badkey: -@@ -552,7 +588,7 @@ static int gcm_setkey(struct crypto_aead +@@ -552,7 +645,7 @@ static int gcm_setkey(struct crypto_aead #endif memcpy(ctx->key, key, keylen); @@ -1727,7 +1858,7 @@ Signed-off-by: Biwen Li ctx->cdata.keylen = keylen; return gcm_set_sh_desc(aead); -@@ -580,7 +616,7 @@ static int rfc4106_setkey(struct crypto_ +@@ -580,7 +673,7 @@ static int rfc4106_setkey(struct crypto_ */ ctx->cdata.keylen = keylen - 4; dma_sync_single_for_device(jrdev, ctx->key_dma, ctx->cdata.keylen, @@ -1736,7 +1867,7 @@ Signed-off-by: Biwen Li return rfc4106_set_sh_desc(aead); } -@@ -606,7 +642,7 @@ static int rfc4543_setkey(struct crypto_ +@@ -606,7 +699,7 @@ static int rfc4543_setkey(struct crypto_ */ ctx->cdata.keylen = keylen - 4; dma_sync_single_for_device(jrdev, ctx->key_dma, ctx->cdata.keylen, @@ -1745,7 +1876,7 @@ Signed-off-by: Biwen Li return rfc4543_set_sh_desc(aead); } -@@ -658,21 +694,21 @@ static int ablkcipher_setkey(struct cryp +@@ -658,21 +751,21 @@ static int ablkcipher_setkey(struct cryp cnstr_shdsc_ablkcipher_encap(desc, &ctx->cdata, ivsize, is_rfc3686, ctx1_iv_off); dma_sync_single_for_device(jrdev, ctx->sh_desc_enc_dma, @@ -1770,7 +1901,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -701,13 +737,13 @@ static int xts_ablkcipher_setkey(struct +@@ -701,13 +794,13 @@ static int xts_ablkcipher_setkey(struct desc = ctx->sh_desc_enc; cnstr_shdsc_xts_ablkcipher_encap(desc, &ctx->cdata); dma_sync_single_for_device(jrdev, ctx->sh_desc_enc_dma, @@ -1786,7 +1917,7 @@ Signed-off-by: Biwen Li return 0; } -@@ -987,9 +1023,6 @@ static void init_aead_job(struct aead_re +@@ -987,9 +1080,6 @@ static void init_aead_job(struct aead_re append_seq_out_ptr(desc, dst_dma, req->assoclen + req->cryptlen - authsize, out_options); @@ -1796,7 +1927,7 @@ Signed-off-by: Biwen Li } static void init_gcm_job(struct aead_request *req, -@@ -1004,6 +1037,7 @@ static void init_gcm_job(struct aead_req +@@ -1004,6 +1094,7 @@ static void init_gcm_job(struct aead_req unsigned int last; init_aead_job(req, edesc, all_contig, encrypt); @@ -1804,7 +1935,48 @@ Signed-off-by: Biwen Li /* BUG This should not be specific to generic GCM. */ last = 0; -@@ -1030,6 +1064,7 @@ static void init_authenc_job(struct aead +@@ -1021,6 +1112,40 @@ static void init_gcm_job(struct aead_req + /* End of blank commands */ + } + ++static void init_chachapoly_job(struct aead_request *req, ++ struct aead_edesc *edesc, bool all_contig, ++ bool encrypt) ++{ ++ struct crypto_aead *aead = crypto_aead_reqtfm(req); ++ unsigned int ivsize = crypto_aead_ivsize(aead); ++ unsigned int assoclen = req->assoclen; ++ u32 *desc = edesc->hw_desc; ++ u32 ctx_iv_off = 4; ++ ++ init_aead_job(req, edesc, all_contig, encrypt); ++ ++ if (ivsize != CHACHAPOLY_IV_SIZE) { ++ /* IPsec specific: CONTEXT1[223:128] = {NONCE, IV} */ ++ ctx_iv_off += 4; ++ ++ /* ++ * The associated data comes already with the IV but we need ++ * to skip it when we authenticate or encrypt... ++ */ ++ assoclen -= ivsize; ++ } ++ ++ append_math_add_imm_u32(desc, REG3, ZERO, IMM, assoclen); ++ ++ /* ++ * For IPsec load the IV further in the same register. ++ * For RFC7539 simply load the 12 bytes nonce in a single operation ++ */ ++ append_load_as_imm(desc, req->iv, ivsize, LDST_CLASS_1_CCB | ++ LDST_SRCDST_BYTE_CONTEXT | ++ ctx_iv_off << LDST_OFFSET_SHIFT); ++} ++ + static void init_authenc_job(struct aead_request *req, + struct aead_edesc *edesc, + bool all_contig, bool encrypt) +@@ -1030,6 +1155,7 @@ static void init_authenc_job(struct aead struct caam_aead_alg, aead); unsigned int ivsize = crypto_aead_ivsize(aead); struct caam_ctx *ctx = crypto_aead_ctx(aead); @@ -1812,7 +1984,7 @@ Signed-off-by: Biwen Li const bool ctr_mode = ((ctx->cdata.algtype & OP_ALG_AAI_MASK) == OP_ALG_AAI_CTR_MOD128); const bool is_rfc3686 = alg->caam.rfc3686; -@@ -1053,6 +1088,15 @@ static void init_authenc_job(struct aead +@@ -1053,6 +1179,15 @@ static void init_authenc_job(struct aead init_aead_job(req, edesc, all_contig, encrypt); @@ -1828,7 +2000,176 @@ Signed-off-by: Biwen Li if (ivsize && ((is_rfc3686 && encrypt) || !alg->caam.geniv)) append_load_as_imm(desc, req->iv, ivsize, LDST_CLASS_1_CCB | -@@ -3204,9 +3248,11 @@ struct caam_crypto_alg { +@@ -1225,8 +1360,16 @@ static struct aead_edesc *aead_edesc_all + } + } + ++ /* ++ * HW reads 4 S/G entries at a time; make sure the reads don't go beyond ++ * the end of the table by allocating more S/G entries. ++ */ + sec4_sg_len = mapped_src_nents > 1 ? mapped_src_nents : 0; +- sec4_sg_len += mapped_dst_nents > 1 ? mapped_dst_nents : 0; ++ if (mapped_dst_nents > 1) ++ sec4_sg_len += ALIGN(mapped_dst_nents, 4); ++ else ++ sec4_sg_len = ALIGN(sec4_sg_len, 4); ++ + sec4_sg_bytes = sec4_sg_len * sizeof(struct sec4_sg_entry); + + /* allocate space for base edesc and hw desc commands, link tables */ +@@ -1307,6 +1450,72 @@ static int gcm_encrypt(struct aead_reque + return ret; + } + ++static int chachapoly_encrypt(struct aead_request *req) ++{ ++ struct aead_edesc *edesc; ++ struct crypto_aead *aead = crypto_aead_reqtfm(req); ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ struct device *jrdev = ctx->jrdev; ++ bool all_contig; ++ u32 *desc; ++ int ret; ++ ++ edesc = aead_edesc_alloc(req, CHACHAPOLY_DESC_JOB_IO_LEN, &all_contig, ++ true); ++ if (IS_ERR(edesc)) ++ return PTR_ERR(edesc); ++ ++ desc = edesc->hw_desc; ++ ++ init_chachapoly_job(req, edesc, all_contig, true); ++ print_hex_dump_debug("chachapoly jobdesc@" __stringify(__LINE__)": ", ++ DUMP_PREFIX_ADDRESS, 16, 4, desc, desc_bytes(desc), ++ 1); ++ ++ ret = caam_jr_enqueue(jrdev, desc, aead_encrypt_done, req); ++ if (!ret) { ++ ret = -EINPROGRESS; ++ } else { ++ aead_unmap(jrdev, edesc, req); ++ kfree(edesc); ++ } ++ ++ return ret; ++} ++ ++static int chachapoly_decrypt(struct aead_request *req) ++{ ++ struct aead_edesc *edesc; ++ struct crypto_aead *aead = crypto_aead_reqtfm(req); ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ struct device *jrdev = ctx->jrdev; ++ bool all_contig; ++ u32 *desc; ++ int ret; ++ ++ edesc = aead_edesc_alloc(req, CHACHAPOLY_DESC_JOB_IO_LEN, &all_contig, ++ false); ++ if (IS_ERR(edesc)) ++ return PTR_ERR(edesc); ++ ++ desc = edesc->hw_desc; ++ ++ init_chachapoly_job(req, edesc, all_contig, false); ++ print_hex_dump_debug("chachapoly jobdesc@" __stringify(__LINE__)": ", ++ DUMP_PREFIX_ADDRESS, 16, 4, desc, desc_bytes(desc), ++ 1); ++ ++ ret = caam_jr_enqueue(jrdev, desc, aead_decrypt_done, req); ++ if (!ret) { ++ ret = -EINPROGRESS; ++ } else { ++ aead_unmap(jrdev, edesc, req); ++ kfree(edesc); ++ } ++ ++ return ret; ++} ++ + static int ipsec_gcm_encrypt(struct aead_request *req) + { + if (req->assoclen < 8) +@@ -1494,7 +1703,25 @@ static struct ablkcipher_edesc *ablkciph + + sec4_sg_ents = 1 + mapped_src_nents; + dst_sg_idx = sec4_sg_ents; +- sec4_sg_ents += mapped_dst_nents > 1 ? mapped_dst_nents : 0; ++ ++ /* ++ * HW reads 4 S/G entries at a time; make sure the reads don't go beyond ++ * the end of the table by allocating more S/G entries. Logic: ++ * if (src != dst && output S/G) ++ * pad output S/G, if needed ++ * else if (src == dst && S/G) ++ * overlapping S/Gs; pad one of them ++ * else if (input S/G) ... ++ * pad input S/G, if needed ++ */ ++ if (mapped_dst_nents > 1) ++ sec4_sg_ents += ALIGN(mapped_dst_nents, 4); ++ else if ((req->src == req->dst) && (mapped_src_nents > 1)) ++ sec4_sg_ents = max(ALIGN(sec4_sg_ents, 4), ++ 1 + ALIGN(mapped_src_nents, 4)); ++ else ++ sec4_sg_ents = ALIGN(sec4_sg_ents, 4); ++ + sec4_sg_bytes = sec4_sg_ents * sizeof(struct sec4_sg_entry); + + /* +@@ -3196,6 +3423,50 @@ static struct caam_aead_alg driver_aeads + .geniv = true, + }, + }, ++ { ++ .aead = { ++ .base = { ++ .cra_name = "rfc7539(chacha20,poly1305)", ++ .cra_driver_name = "rfc7539-chacha20-poly1305-" ++ "caam", ++ .cra_blocksize = 1, ++ }, ++ .setkey = chachapoly_setkey, ++ .setauthsize = chachapoly_setauthsize, ++ .encrypt = chachapoly_encrypt, ++ .decrypt = chachapoly_decrypt, ++ .ivsize = CHACHAPOLY_IV_SIZE, ++ .maxauthsize = POLY1305_DIGEST_SIZE, ++ }, ++ .caam = { ++ .class1_alg_type = OP_ALG_ALGSEL_CHACHA20 | ++ OP_ALG_AAI_AEAD, ++ .class2_alg_type = OP_ALG_ALGSEL_POLY1305 | ++ OP_ALG_AAI_AEAD, ++ }, ++ }, ++ { ++ .aead = { ++ .base = { ++ .cra_name = "rfc7539esp(chacha20,poly1305)", ++ .cra_driver_name = "rfc7539esp-chacha20-" ++ "poly1305-caam", ++ .cra_blocksize = 1, ++ }, ++ .setkey = chachapoly_setkey, ++ .setauthsize = chachapoly_setauthsize, ++ .encrypt = chachapoly_encrypt, ++ .decrypt = chachapoly_decrypt, ++ .ivsize = 8, ++ .maxauthsize = POLY1305_DIGEST_SIZE, ++ }, ++ .caam = { ++ .class1_alg_type = OP_ALG_ALGSEL_CHACHA20 | ++ OP_ALG_AAI_AEAD, ++ .class2_alg_type = OP_ALG_ALGSEL_POLY1305 | ++ OP_ALG_AAI_AEAD, ++ }, ++ }, + }; + + struct caam_crypto_alg { +@@ -3204,9 +3475,11 @@ struct caam_crypto_alg { struct caam_alg_entry caam; }; @@ -1841,7 +2182,7 @@ Signed-off-by: Biwen Li ctx->jrdev = caam_jr_alloc(); if (IS_ERR(ctx->jrdev)) { -@@ -3214,10 +3260,16 @@ static int caam_init_common(struct caam_ +@@ -3214,10 +3487,16 @@ static int caam_init_common(struct caam_ return PTR_ERR(ctx->jrdev); } @@ -1859,7 +2200,7 @@ Signed-off-by: Biwen Li if (dma_mapping_error(ctx->jrdev, dma_addr)) { dev_err(ctx->jrdev, "unable to map key, shared descriptors\n"); caam_jr_free(ctx->jrdev); -@@ -3245,7 +3297,7 @@ static int caam_cra_init(struct crypto_t +@@ -3245,7 +3524,7 @@ static int caam_cra_init(struct crypto_t container_of(alg, struct caam_crypto_alg, crypto_alg); struct caam_ctx *ctx = crypto_tfm_ctx(tfm); @@ -1868,7 +2209,7 @@ Signed-off-by: Biwen Li } static int caam_aead_init(struct crypto_aead *tfm) -@@ -3255,14 +3307,15 @@ static int caam_aead_init(struct crypto_ +@@ -3255,14 +3534,15 @@ static int caam_aead_init(struct crypto_ container_of(alg, struct caam_aead_alg, aead); struct caam_ctx *ctx = crypto_aead_ctx(tfm); @@ -1886,6 +2227,166 @@ Signed-off-by: Biwen Li caam_jr_free(ctx->jrdev); } +@@ -3276,7 +3556,7 @@ static void caam_aead_exit(struct crypto + caam_exit_common(crypto_aead_ctx(tfm)); + } + +-static void __exit caam_algapi_exit(void) ++void caam_algapi_exit(void) + { + + struct caam_crypto_alg *t_alg, *n; +@@ -3355,56 +3635,52 @@ static void caam_aead_alg_init(struct ca + alg->exit = caam_aead_exit; + } + +-static int __init caam_algapi_init(void) ++int caam_algapi_init(struct device *ctrldev) + { +- struct device_node *dev_node; +- struct platform_device *pdev; +- struct device *ctrldev; +- struct caam_drv_private *priv; ++ struct caam_drv_private *priv = dev_get_drvdata(ctrldev); + int i = 0, err = 0; +- u32 cha_vid, cha_inst, des_inst, aes_inst, md_inst; ++ u32 aes_vid, aes_inst, des_inst, md_vid, md_inst, ccha_inst, ptha_inst; + unsigned int md_limit = SHA512_DIGEST_SIZE; + bool registered = false; + +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); +- if (!dev_node) { +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); +- if (!dev_node) +- return -ENODEV; +- } +- +- pdev = of_find_device_by_node(dev_node); +- if (!pdev) { +- of_node_put(dev_node); +- return -ENODEV; +- } +- +- ctrldev = &pdev->dev; +- priv = dev_get_drvdata(ctrldev); +- of_node_put(dev_node); +- +- /* +- * If priv is NULL, it's probably because the caam driver wasn't +- * properly initialized (e.g. RNG4 init failed). Thus, bail out here. +- */ +- if (!priv) +- return -ENODEV; +- +- + INIT_LIST_HEAD(&alg_list); + + /* + * Register crypto algorithms the device supports. + * First, detect presence and attributes of DES, AES, and MD blocks. + */ +- cha_vid = rd_reg32(&priv->ctrl->perfmon.cha_id_ls); +- cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls); +- des_inst = (cha_inst & CHA_ID_LS_DES_MASK) >> CHA_ID_LS_DES_SHIFT; +- aes_inst = (cha_inst & CHA_ID_LS_AES_MASK) >> CHA_ID_LS_AES_SHIFT; +- md_inst = (cha_inst & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ if (priv->era < 10) { ++ u32 cha_vid, cha_inst; ++ ++ cha_vid = rd_reg32(&priv->ctrl->perfmon.cha_id_ls); ++ aes_vid = cha_vid & CHA_ID_LS_AES_MASK; ++ md_vid = (cha_vid & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ ++ cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls); ++ des_inst = (cha_inst & CHA_ID_LS_DES_MASK) >> ++ CHA_ID_LS_DES_SHIFT; ++ aes_inst = cha_inst & CHA_ID_LS_AES_MASK; ++ md_inst = (cha_inst & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ ccha_inst = 0; ++ ptha_inst = 0; ++ } else { ++ u32 aesa, mdha; ++ ++ aesa = rd_reg32(&priv->ctrl->vreg.aesa); ++ mdha = rd_reg32(&priv->ctrl->vreg.mdha); ++ ++ aes_vid = (aesa & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT; ++ md_vid = (mdha & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT; ++ ++ des_inst = rd_reg32(&priv->ctrl->vreg.desa) & CHA_VER_NUM_MASK; ++ aes_inst = aesa & CHA_VER_NUM_MASK; ++ md_inst = mdha & CHA_VER_NUM_MASK; ++ ccha_inst = rd_reg32(&priv->ctrl->vreg.ccha) & CHA_VER_NUM_MASK; ++ ptha_inst = rd_reg32(&priv->ctrl->vreg.ptha) & CHA_VER_NUM_MASK; ++ } + + /* If MD is present, limit digest size based on LP256 */ +- if (md_inst && ((cha_vid & CHA_ID_LS_MD_MASK) == CHA_ID_LS_MD_LP256)) ++ if (md_inst && md_vid == CHA_VER_VID_MD_LP256) + md_limit = SHA256_DIGEST_SIZE; + + for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { +@@ -3426,10 +3702,10 @@ static int __init caam_algapi_init(void) + * Check support for AES modes not available + * on LP devices. + */ +- if ((cha_vid & CHA_ID_LS_AES_MASK) == CHA_ID_LS_AES_LP) +- if ((alg->class1_alg_type & OP_ALG_AAI_MASK) == +- OP_ALG_AAI_XTS) +- continue; ++ if (aes_vid == CHA_VER_VID_AES_LP && ++ (alg->class1_alg_type & OP_ALG_AAI_MASK) == ++ OP_ALG_AAI_XTS) ++ continue; + + t_alg = caam_alg_alloc(alg); + if (IS_ERR(t_alg)) { +@@ -3468,21 +3744,28 @@ static int __init caam_algapi_init(void) + if (!aes_inst && (c1_alg_sel == OP_ALG_ALGSEL_AES)) + continue; + ++ /* Skip CHACHA20 algorithms if not supported by device */ ++ if (c1_alg_sel == OP_ALG_ALGSEL_CHACHA20 && !ccha_inst) ++ continue; ++ ++ /* Skip POLY1305 algorithms if not supported by device */ ++ if (c2_alg_sel == OP_ALG_ALGSEL_POLY1305 && !ptha_inst) ++ continue; ++ + /* + * Check support for AES algorithms not available + * on LP devices. + */ +- if ((cha_vid & CHA_ID_LS_AES_MASK) == CHA_ID_LS_AES_LP) +- if (alg_aai == OP_ALG_AAI_GCM) +- continue; ++ if (aes_vid == CHA_VER_VID_AES_LP && alg_aai == OP_ALG_AAI_GCM) ++ continue; + + /* + * Skip algorithms requiring message digests + * if MD or MD size is not supported by device. + */ +- if (c2_alg_sel && +- (!md_inst || (t_alg->aead.maxauthsize > md_limit))) +- continue; ++ if ((c2_alg_sel & ~OP_ALG_ALGSEL_SUBMASK) == 0x40 && ++ (!md_inst || t_alg->aead.maxauthsize > md_limit)) ++ continue; + + caam_aead_alg_init(t_alg); + +@@ -3502,10 +3785,3 @@ static int __init caam_algapi_init(void) + + return err; + } +- +-module_init(caam_algapi_init); +-module_exit(caam_algapi_exit); +- +-MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("FSL CAAM support for crypto API"); +-MODULE_AUTHOR("Freescale Semiconductor - NMG/STC"); --- a/drivers/crypto/caam/caamalg_desc.c +++ b/drivers/crypto/caam/caamalg_desc.c @@ -45,16 +45,16 @@ static inline void append_dec_op1(u32 *d @@ -2881,6 +3382,15 @@ Signed-off-by: Biwen Li /* assoclen + cryptlen = seqinlen */ append_math_sub(desc, REG3, SEQINLEN, REG0, CAAM_CMD_SZ); +@@ -931,7 +1507,7 @@ void cnstr_shdsc_rfc4543_encap(u32 * con + read_move_cmd = append_move(desc, MOVE_SRC_DESCBUF | MOVE_DEST_MATH3 | + (0x6 << MOVE_LEN_SHIFT)); + write_move_cmd = append_move(desc, MOVE_SRC_MATH3 | MOVE_DEST_DESCBUF | +- (0x8 << MOVE_LEN_SHIFT)); ++ (0x8 << MOVE_LEN_SHIFT) | MOVE_WAITCOMP); + + /* Will read assoclen + cryptlen bytes */ + append_math_sub(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ); @@ -966,10 +1542,13 @@ EXPORT_SYMBOL(cnstr_shdsc_rfc4543_encap) * @desc: pointer to buffer used for descriptor construction * @cdata: pointer to block cipher transform definitions @@ -2915,47 +3425,215 @@ Signed-off-by: Biwen Li /* assoclen + cryptlen = seqoutlen */ append_math_sub(desc, REG3, SEQOUTLEN, REG0, CAAM_CMD_SZ); -@@ -1075,7 +1666,7 @@ void cnstr_shdsc_ablkcipher_encap(u32 * - - /* Load nonce into CONTEXT1 reg */ - if (is_rfc3686) { -- u8 *nonce = cdata->key_virt + cdata->keylen; -+ const u8 *nonce = cdata->key_virt + cdata->keylen; - - append_load_as_imm(desc, nonce, CTR_RFC3686_NONCE_SIZE, - LDST_CLASS_IND_CCB | -@@ -1140,7 +1731,7 @@ void cnstr_shdsc_ablkcipher_decap(u32 * - - /* Load nonce into CONTEXT1 reg */ - if (is_rfc3686) { -- u8 *nonce = cdata->key_virt + cdata->keylen; -+ const u8 *nonce = cdata->key_virt + cdata->keylen; - - append_load_as_imm(desc, nonce, CTR_RFC3686_NONCE_SIZE, - LDST_CLASS_IND_CCB | -@@ -1209,7 +1800,7 @@ void cnstr_shdsc_ablkcipher_givencap(u32 - - /* Load Nonce into CONTEXT1 reg */ - if (is_rfc3686) { -- u8 *nonce = cdata->key_virt + cdata->keylen; -+ const u8 *nonce = cdata->key_virt + cdata->keylen; - - append_load_as_imm(desc, nonce, CTR_RFC3686_NONCE_SIZE, - LDST_CLASS_IND_CCB | ---- a/drivers/crypto/caam/caamalg_desc.h -+++ b/drivers/crypto/caam/caamalg_desc.h -@@ -17,6 +17,9 @@ - #define DESC_QI_AEAD_DEC_LEN (DESC_AEAD_DEC_LEN + 3 * CAAM_CMD_SZ) - #define DESC_QI_AEAD_GIVENC_LEN (DESC_AEAD_GIVENC_LEN + 3 * CAAM_CMD_SZ) +@@ -1001,7 +1592,7 @@ void cnstr_shdsc_rfc4543_decap(u32 * con + read_move_cmd = append_move(desc, MOVE_SRC_DESCBUF | MOVE_DEST_MATH3 | + (0x6 << MOVE_LEN_SHIFT)); + write_move_cmd = append_move(desc, MOVE_SRC_MATH3 | MOVE_DEST_DESCBUF | +- (0x8 << MOVE_LEN_SHIFT)); ++ (0x8 << MOVE_LEN_SHIFT) | MOVE_WAITCOMP); -+#define DESC_TLS_BASE (4 * CAAM_CMD_SZ) -+#define DESC_TLS10_ENC_LEN (DESC_TLS_BASE + 29 * CAAM_CMD_SZ) -+ - /* Note: Nonce is counted in cdata.keylen */ - #define DESC_AEAD_CTR_RFC3686_LEN (4 * CAAM_CMD_SZ) + /* Will read assoclen + cryptlen bytes */ + append_math_sub(desc, VARSEQINLEN, SEQOUTLEN, REG0, CAAM_CMD_SZ); +@@ -1035,6 +1626,138 @@ void cnstr_shdsc_rfc4543_decap(u32 * con + } + EXPORT_SYMBOL(cnstr_shdsc_rfc4543_decap); -@@ -27,14 +30,20 @@ - #define DESC_GCM_BASE (3 * CAAM_CMD_SZ) ++/** ++ * cnstr_shdsc_chachapoly - Chacha20 + Poly1305 generic AEAD (rfc7539) and ++ * IPsec ESP (rfc7634, a.k.a. rfc7539esp) shared ++ * descriptor (non-protocol). ++ * @desc: pointer to buffer used for descriptor construction ++ * @cdata: pointer to block cipher transform definitions ++ * Valid algorithm values - OP_ALG_ALGSEL_CHACHA20 ANDed with ++ * OP_ALG_AAI_AEAD. ++ * @adata: pointer to authentication transform definitions ++ * Valid algorithm values - OP_ALG_ALGSEL_POLY1305 ANDed with ++ * OP_ALG_AAI_AEAD. ++ * @ivsize: initialization vector size ++ * @icvsize: integrity check value (ICV) size (truncated or full) ++ * @encap: true if encapsulation, false if decapsulation ++ * @is_qi: true when called from caam/qi ++ */ ++void cnstr_shdsc_chachapoly(u32 * const desc, struct alginfo *cdata, ++ struct alginfo *adata, unsigned int ivsize, ++ unsigned int icvsize, const bool encap, ++ const bool is_qi) ++{ ++ u32 *key_jump_cmd, *wait_cmd; ++ u32 nfifo; ++ const bool is_ipsec = (ivsize != CHACHAPOLY_IV_SIZE); ++ ++ /* Note: Context registers are saved. */ ++ init_sh_desc(desc, HDR_SHARE_SERIAL | HDR_SAVECTX); ++ ++ /* skip key loading if they are loaded due to sharing */ ++ key_jump_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL | ++ JUMP_COND_SHRD); ++ ++ append_key_as_imm(desc, cdata->key_virt, cdata->keylen, cdata->keylen, ++ CLASS_1 | KEY_DEST_CLASS_REG); ++ ++ /* For IPsec load the salt from keymat in the context register */ ++ if (is_ipsec) ++ append_load_as_imm(desc, cdata->key_virt + cdata->keylen, 4, ++ LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT | ++ 4 << LDST_OFFSET_SHIFT); ++ ++ set_jump_tgt_here(desc, key_jump_cmd); ++ ++ /* Class 2 and 1 operations: Poly & ChaCha */ ++ if (encap) { ++ append_operation(desc, adata->algtype | OP_ALG_AS_INITFINAL | ++ OP_ALG_ENCRYPT); ++ append_operation(desc, cdata->algtype | OP_ALG_AS_INITFINAL | ++ OP_ALG_ENCRYPT); ++ } else { ++ append_operation(desc, adata->algtype | OP_ALG_AS_INITFINAL | ++ OP_ALG_DECRYPT | OP_ALG_ICV_ON); ++ append_operation(desc, cdata->algtype | OP_ALG_AS_INITFINAL | ++ OP_ALG_DECRYPT); ++ } ++ ++ if (is_qi) { ++ u32 *wait_load_cmd; ++ u32 ctx1_iv_off = is_ipsec ? 8 : 4; ++ ++ /* REG3 = assoclen */ ++ append_seq_load(desc, 4, LDST_CLASS_DECO | ++ LDST_SRCDST_WORD_DECO_MATH3 | ++ 4 << LDST_OFFSET_SHIFT); ++ ++ wait_load_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL | ++ JUMP_COND_CALM | JUMP_COND_NCP | ++ JUMP_COND_NOP | JUMP_COND_NIP | ++ JUMP_COND_NIFP); ++ set_jump_tgt_here(desc, wait_load_cmd); ++ ++ append_seq_load(desc, ivsize, LDST_CLASS_1_CCB | ++ LDST_SRCDST_BYTE_CONTEXT | ++ ctx1_iv_off << LDST_OFFSET_SHIFT); ++ } ++ ++ /* ++ * MAGIC with NFIFO ++ * Read associated data from the input and send them to class1 and ++ * class2 alignment blocks. From class1 send data to output fifo and ++ * then write it to memory since we don't need to encrypt AD. ++ */ ++ nfifo = NFIFOENTRY_DEST_BOTH | NFIFOENTRY_FC1 | NFIFOENTRY_FC2 | ++ NFIFOENTRY_DTYPE_POLY | NFIFOENTRY_BND; ++ append_load_imm_u32(desc, nfifo, LDST_CLASS_IND_CCB | ++ LDST_SRCDST_WORD_INFO_FIFO_SM | LDLEN_MATH3); ++ ++ append_math_add(desc, VARSEQINLEN, ZERO, REG3, CAAM_CMD_SZ); ++ append_math_add(desc, VARSEQOUTLEN, ZERO, REG3, CAAM_CMD_SZ); ++ append_seq_fifo_load(desc, 0, FIFOLD_TYPE_NOINFOFIFO | ++ FIFOLD_CLASS_CLASS1 | LDST_VLF); ++ append_move_len(desc, MOVE_AUX_LS | MOVE_SRC_AUX_ABLK | ++ MOVE_DEST_OUTFIFO | MOVELEN_MRSEL_MATH3); ++ append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | LDST_VLF); ++ ++ /* IPsec - copy IV at the output */ ++ if (is_ipsec) ++ append_seq_fifo_store(desc, ivsize, FIFOST_TYPE_METADATA | ++ 0x2 << 25); ++ ++ wait_cmd = append_jump(desc, JUMP_JSL | JUMP_TYPE_LOCAL | ++ JUMP_COND_NOP | JUMP_TEST_ALL); ++ set_jump_tgt_here(desc, wait_cmd); ++ ++ if (encap) { ++ /* Read and write cryptlen bytes */ ++ append_math_add(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ); ++ append_math_add(desc, VARSEQOUTLEN, SEQINLEN, REG0, ++ CAAM_CMD_SZ); ++ aead_append_src_dst(desc, FIFOLD_TYPE_MSG1OUT2); ++ ++ /* Write ICV */ ++ append_seq_store(desc, icvsize, LDST_CLASS_2_CCB | ++ LDST_SRCDST_BYTE_CONTEXT); ++ } else { ++ /* Read and write cryptlen bytes */ ++ append_math_add(desc, VARSEQINLEN, SEQOUTLEN, REG0, CAAM_CMD_SZ); ++ append_math_add(desc, VARSEQOUTLEN, SEQOUTLEN, REG0, ++ CAAM_CMD_SZ); ++ aead_append_src_dst(desc, FIFOLD_TYPE_MSG); ++ ++ /* Load ICV for verification */ ++ append_seq_fifo_load(desc, icvsize, FIFOLD_CLASS_CLASS2 | ++ FIFOLD_TYPE_LAST2 | FIFOLD_TYPE_ICV); ++ } ++ ++ print_hex_dump_debug("chachapoly shdesc@" __stringify(__LINE__)": ", ++ DUMP_PREFIX_ADDRESS, 16, 4, desc, desc_bytes(desc), ++ 1); ++} ++EXPORT_SYMBOL(cnstr_shdsc_chachapoly); ++ + /* + * For ablkcipher encrypt and decrypt, read from req->src and + * write to req->dst +@@ -1053,7 +1776,8 @@ static inline void ablkcipher_append_src + * @desc: pointer to buffer used for descriptor construction + * @cdata: pointer to block cipher transform definitions + * Valid algorithm values - one of OP_ALG_ALGSEL_{AES, DES, 3DES} ANDed +- * with OP_ALG_AAI_CBC or OP_ALG_AAI_CTR_MOD128. ++ * with OP_ALG_AAI_CBC or OP_ALG_AAI_CTR_MOD128 ++ * - OP_ALG_ALGSEL_CHACHA20 + * @ivsize: initialization vector size + * @is_rfc3686: true when ctr(aes) is wrapped by rfc3686 template + * @ctx1_iv_off: IV offset in CONTEXT1 register +@@ -1075,7 +1799,7 @@ void cnstr_shdsc_ablkcipher_encap(u32 * + + /* Load nonce into CONTEXT1 reg */ + if (is_rfc3686) { +- u8 *nonce = cdata->key_virt + cdata->keylen; ++ const u8 *nonce = cdata->key_virt + cdata->keylen; + + append_load_as_imm(desc, nonce, CTR_RFC3686_NONCE_SIZE, + LDST_CLASS_IND_CCB | +@@ -1118,7 +1842,8 @@ EXPORT_SYMBOL(cnstr_shdsc_ablkcipher_enc + * @desc: pointer to buffer used for descriptor construction + * @cdata: pointer to block cipher transform definitions + * Valid algorithm values - one of OP_ALG_ALGSEL_{AES, DES, 3DES} ANDed +- * with OP_ALG_AAI_CBC or OP_ALG_AAI_CTR_MOD128. ++ * with OP_ALG_AAI_CBC or OP_ALG_AAI_CTR_MOD128 ++ * - OP_ALG_ALGSEL_CHACHA20 + * @ivsize: initialization vector size + * @is_rfc3686: true when ctr(aes) is wrapped by rfc3686 template + * @ctx1_iv_off: IV offset in CONTEXT1 register +@@ -1140,7 +1865,7 @@ void cnstr_shdsc_ablkcipher_decap(u32 * + + /* Load nonce into CONTEXT1 reg */ + if (is_rfc3686) { +- u8 *nonce = cdata->key_virt + cdata->keylen; ++ const u8 *nonce = cdata->key_virt + cdata->keylen; + + append_load_as_imm(desc, nonce, CTR_RFC3686_NONCE_SIZE, + LDST_CLASS_IND_CCB | +@@ -1209,7 +1934,7 @@ void cnstr_shdsc_ablkcipher_givencap(u32 + + /* Load Nonce into CONTEXT1 reg */ + if (is_rfc3686) { +- u8 *nonce = cdata->key_virt + cdata->keylen; ++ const u8 *nonce = cdata->key_virt + cdata->keylen; + + append_load_as_imm(desc, nonce, CTR_RFC3686_NONCE_SIZE, + LDST_CLASS_IND_CCB | +--- a/drivers/crypto/caam/caamalg_desc.h ++++ b/drivers/crypto/caam/caamalg_desc.h +@@ -17,6 +17,9 @@ + #define DESC_QI_AEAD_DEC_LEN (DESC_AEAD_DEC_LEN + 3 * CAAM_CMD_SZ) + #define DESC_QI_AEAD_GIVENC_LEN (DESC_AEAD_GIVENC_LEN + 3 * CAAM_CMD_SZ) + ++#define DESC_TLS_BASE (4 * CAAM_CMD_SZ) ++#define DESC_TLS10_ENC_LEN (DESC_TLS_BASE + 29 * CAAM_CMD_SZ) ++ + /* Note: Nonce is counted in cdata.keylen */ + #define DESC_AEAD_CTR_RFC3686_LEN (4 * CAAM_CMD_SZ) + +@@ -27,14 +30,20 @@ + #define DESC_GCM_BASE (3 * CAAM_CMD_SZ) #define DESC_GCM_ENC_LEN (DESC_GCM_BASE + 16 * CAAM_CMD_SZ) #define DESC_GCM_DEC_LEN (DESC_GCM_BASE + 12 * CAAM_CMD_SZ) +#define DESC_QI_GCM_ENC_LEN (DESC_GCM_ENC_LEN + 6 * CAAM_CMD_SZ) @@ -2975,7 +3653,7 @@ Signed-off-by: Biwen Li #define DESC_ABLKCIPHER_BASE (3 * CAAM_CMD_SZ) #define DESC_ABLKCIPHER_ENC_LEN (DESC_ABLKCIPHER_BASE + \ -@@ -43,46 +52,62 @@ +@@ -43,46 +52,67 @@ 15 * CAAM_CMD_SZ) void cnstr_shdsc_aead_null_encap(u32 * const desc, struct alginfo *adata, @@ -3046,6 +3724,11 @@ Signed-off-by: Biwen Li - unsigned int icvsize); + unsigned int ivsize, unsigned int icvsize, + const bool is_qi); ++ ++void cnstr_shdsc_chachapoly(u32 * const desc, struct alginfo *cdata, ++ struct alginfo *adata, unsigned int ivsize, ++ unsigned int icvsize, const bool encap, ++ const bool is_qi); void cnstr_shdsc_ablkcipher_encap(u32 * const desc, struct alginfo *cdata, unsigned int ivsize, const bool is_rfc3686, @@ -3131,7 +3814,7 @@ Signed-off-by: Biwen Li + memcpy(ctx->key, keys.authkey, keys.authkeylen); + memcpy(ctx->key + ctx->adata.keylen_pad, keys.enckey, + keys.enckeylen); -+ dma_sync_single_for_device(jrdev, ctx->key_dma, ++ dma_sync_single_for_device(jrdev->parent, ctx->key_dma, + ctx->adata.keylen_pad + + keys.enckeylen, ctx->dir); + goto skip_split_key; @@ -3156,12 +3839,17 @@ Signed-off-by: Biwen Li ctx->cdata.keylen = keys.enckeylen; ret = aead_set_sh_desc(aead); -@@ -258,6 +284,468 @@ badkey: +@@ -258,55 +284,139 @@ badkey: return -EINVAL; } +-static int ablkcipher_setkey(struct crypto_ablkcipher *ablkcipher, +- const u8 *key, unsigned int keylen) +static int tls_set_sh_desc(struct crypto_aead *tls) -+{ + { +- struct caam_ctx *ctx = crypto_ablkcipher_ctx(ablkcipher); +- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablkcipher); +- const char *alg_name = crypto_tfm_alg_name(tfm); + struct caam_ctx *ctx = crypto_aead_ctx(tls); + unsigned int ivsize = crypto_aead_ivsize(tls); + unsigned int blocksize = crypto_aead_blocksize(tls); @@ -3231,26 +3919,45 @@ Signed-off-by: Biwen Li + unsigned int keylen) +{ + struct caam_ctx *ctx = crypto_aead_ctx(tls); -+ struct device *jrdev = ctx->jrdev; + struct device *jrdev = ctx->jrdev; +- unsigned int ivsize = crypto_ablkcipher_ivsize(ablkcipher); +- u32 ctx1_iv_off = 0; +- const bool ctr_mode = ((ctx->cdata.algtype & OP_ALG_AAI_MASK) == +- OP_ALG_AAI_CTR_MOD128); +- const bool is_rfc3686 = (ctr_mode && strstr(alg_name, "rfc3686")); + struct caam_drv_private *ctrlpriv = dev_get_drvdata(jrdev->parent); + struct crypto_authenc_keys keys; -+ int ret = 0; -+ + int ret = 0; + +- memcpy(ctx->key, key, keylen); + if (crypto_authenc_extractkeys(&keys, key, keylen) != 0) + goto badkey; + -+#ifdef DEBUG + #ifdef DEBUG + dev_err(jrdev, "keylen %d enckeylen %d authkeylen %d\n", + keys.authkeylen + keys.enckeylen, keys.enckeylen, + keys.authkeylen); -+ print_hex_dump(KERN_ERR, "key in @" __stringify(__LINE__)": ", -+ DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1); -+#endif -+ -+ /* + print_hex_dump(KERN_ERR, "key in @" __stringify(__LINE__)": ", + DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1); + #endif +- /* +- * AES-CTR needs to load IV in CONTEXT1 reg +- * at an offset of 128bits (16bytes) +- * CONTEXT1[255:128] = IV +- */ +- if (ctr_mode) +- ctx1_iv_off = 16; + + /* +- * RFC3686 specific: +- * | CONTEXT1[255:128] = {NONCE, IV, COUNTER} +- * | *key = {KEY, NONCE} + * If DKP is supported, use it in the shared descriptor to generate + * the split key. -+ */ + */ +- if (is_rfc3686) { +- ctx1_iv_off = 16 + CTR_RFC3686_NONCE_SIZE; +- keylen -= CTR_RFC3686_NONCE_SIZE; + if (ctrlpriv->era >= 6) { + ctx->adata.keylen = keys.authkeylen; + ctx->adata.keylen_pad = split_key_len(ctx->adata.algtype & @@ -3266,14 +3973,25 @@ Signed-off-by: Biwen Li + ctx->adata.keylen_pad + + keys.enckeylen, ctx->dir); + goto skip_split_key; -+ } -+ + } + +- dma_sync_single_for_device(jrdev, ctx->key_dma, keylen, DMA_TO_DEVICE); +- ctx->cdata.keylen = keylen; +- ctx->cdata.key_virt = ctx->key; +- ctx->cdata.key_inline = true; + ret = gen_split_key(jrdev, ctx->key, &ctx->adata, keys.authkey, + keys.authkeylen, CAAM_MAX_KEY_SIZE - + keys.enckeylen); + if (ret) + goto badkey; -+ + +- /* ablkcipher encrypt, decrypt, givencrypt shared descriptors */ +- cnstr_shdsc_ablkcipher_encap(ctx->sh_desc_enc, &ctx->cdata, ivsize, +- is_rfc3686, ctx1_iv_off); +- cnstr_shdsc_ablkcipher_decap(ctx->sh_desc_dec, &ctx->cdata, ivsize, +- is_rfc3686, ctx1_iv_off); +- cnstr_shdsc_ablkcipher_givencap(ctx->sh_desc_givenc, &ctx->cdata, +- ivsize, is_rfc3686, ctx1_iv_off); + /* postpend encryption key to auth split key */ + memcpy(ctx->key + ctx->adata.keylen_pad, keys.enckey, keys.enckeylen); + dma_sync_single_for_device(jrdev, ctx->key_dma, ctx->adata.keylen_pad + @@ -3293,39 +4011,44 @@ Signed-off-by: Biwen Li + ret = tls_set_sh_desc(tls); + if (ret) + goto badkey; -+ -+ /* Now update the driver contexts with the new shared descriptor */ -+ if (ctx->drv_ctx[ENCRYPT]) { -+ ret = caam_drv_ctx_update(ctx->drv_ctx[ENCRYPT], -+ ctx->sh_desc_enc); -+ if (ret) { -+ dev_err(jrdev, "driver enc context update failed\n"); -+ goto badkey; -+ } -+ } -+ -+ if (ctx->drv_ctx[DECRYPT]) { -+ ret = caam_drv_ctx_update(ctx->drv_ctx[DECRYPT], -+ ctx->sh_desc_dec); -+ if (ret) { -+ dev_err(jrdev, "driver dec context update failed\n"); -+ goto badkey; -+ } -+ } -+ -+ return ret; -+badkey: + + /* Now update the driver contexts with the new shared descriptor */ + if (ctx->drv_ctx[ENCRYPT]) { +@@ -327,42 +437,84 @@ static int ablkcipher_setkey(struct cryp + } + } + +- if (ctx->drv_ctx[GIVENCRYPT]) { +- ret = caam_drv_ctx_update(ctx->drv_ctx[GIVENCRYPT], +- ctx->sh_desc_givenc); +- if (ret) { +- dev_err(jrdev, "driver givenc context update failed\n"); +- goto badkey; +- } +- } +- + return ret; + badkey: +- crypto_ablkcipher_set_flags(ablkcipher, CRYPTO_TFM_RES_BAD_KEY_LEN); + crypto_aead_set_flags(tls, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ return -EINVAL; -+} -+ + return -EINVAL; + } + +-static int xts_ablkcipher_setkey(struct crypto_ablkcipher *ablkcipher, +- const u8 *key, unsigned int keylen) +static int gcm_set_sh_desc(struct crypto_aead *aead) -+{ + { +- struct caam_ctx *ctx = crypto_ablkcipher_ctx(ablkcipher); +- struct device *jrdev = ctx->jrdev; +- int ret = 0; + struct caam_ctx *ctx = crypto_aead_ctx(aead); + unsigned int ivsize = crypto_aead_ivsize(aead); + int rem_bytes = CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN - + ctx->cdata.keylen; -+ + +- if (keylen != 2 * AES_MIN_KEY_SIZE && keylen != 2 * AES_MAX_KEY_SIZE) { +- dev_err(jrdev, "key size mismatch\n"); +- goto badkey; + if (!ctx->cdata.keylen || !ctx->authsize) + return 0; + @@ -3354,8 +4077,8 @@ Signed-off-by: Biwen Li + } else { + ctx->cdata.key_inline = false; + ctx->cdata.key_dma = ctx->key_dma; -+ } -+ + } + + cnstr_shdsc_gcm_decap(ctx->sh_desc_dec, &ctx->cdata, ivsize, + ctx->authsize, true); + @@ -3384,62 +4107,129 @@ Signed-off-by: Biwen Li + DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1); +#endif + -+ memcpy(ctx->key, key, keylen); + memcpy(ctx->key, key, keylen); +- dma_sync_single_for_device(jrdev, ctx->key_dma, keylen, DMA_TO_DEVICE); + dma_sync_single_for_device(jrdev, ctx->key_dma, keylen, ctx->dir); -+ ctx->cdata.keylen = keylen; -+ + ctx->cdata.keylen = keylen; +- ctx->cdata.key_virt = ctx->key; +- ctx->cdata.key_inline = true; + +- /* xts ablkcipher encrypt, decrypt shared descriptors */ +- cnstr_shdsc_xts_ablkcipher_encap(ctx->sh_desc_enc, &ctx->cdata); +- cnstr_shdsc_xts_ablkcipher_decap(ctx->sh_desc_dec, &ctx->cdata); + ret = gcm_set_sh_desc(aead); + if (ret) + return ret; -+ -+ /* Now update the driver contexts with the new shared descriptor */ -+ if (ctx->drv_ctx[ENCRYPT]) { -+ ret = caam_drv_ctx_update(ctx->drv_ctx[ENCRYPT], -+ ctx->sh_desc_enc); -+ if (ret) { -+ dev_err(jrdev, "driver enc context update failed\n"); + + /* Now update the driver contexts with the new shared descriptor */ + if (ctx->drv_ctx[ENCRYPT]) { +@@ -370,7 +522,7 @@ static int xts_ablkcipher_setkey(struct + ctx->sh_desc_enc); + if (ret) { + dev_err(jrdev, "driver enc context update failed\n"); +- goto badkey; + return ret; -+ } -+ } -+ -+ if (ctx->drv_ctx[DECRYPT]) { -+ ret = caam_drv_ctx_update(ctx->drv_ctx[DECRYPT], -+ ctx->sh_desc_dec); -+ if (ret) { -+ dev_err(jrdev, "driver dec context update failed\n"); + } + } + +@@ -379,151 +531,829 @@ static int xts_ablkcipher_setkey(struct + ctx->sh_desc_dec); + if (ret) { + dev_err(jrdev, "driver dec context update failed\n"); +- goto badkey; + return ret; -+ } -+ } -+ + } + } + +- return ret; +-badkey: +- crypto_ablkcipher_set_flags(ablkcipher, CRYPTO_TFM_RES_BAD_KEY_LEN); +- return -EINVAL; + return 0; -+} -+ + } + +-/* +- * aead_edesc - s/w-extended aead descriptor +- * @src_nents: number of segments in input scatterlist +- * @dst_nents: number of segments in output scatterlist +- * @iv_dma: dma address of iv for checking continuity and link table +- * @qm_sg_bytes: length of dma mapped h/w link table +- * @qm_sg_dma: bus physical mapped address of h/w link table +- * @assoclen: associated data length, in CAAM endianness +- * @assoclen_dma: bus physical mapped address of req->assoclen +- * @drv_req: driver-specific request structure +- * @sgt: the h/w link table, followed by IV +- */ +-struct aead_edesc { +- int src_nents; +- int dst_nents; +- dma_addr_t iv_dma; +- int qm_sg_bytes; +- dma_addr_t qm_sg_dma; +- unsigned int assoclen; +- dma_addr_t assoclen_dma; +- struct caam_drv_req drv_req; +- struct qm_sg_entry sgt[0]; +-}; +static int rfc4106_set_sh_desc(struct crypto_aead *aead) +{ + struct caam_ctx *ctx = crypto_aead_ctx(aead); + unsigned int ivsize = crypto_aead_ivsize(aead); + int rem_bytes = CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN - + ctx->cdata.keylen; -+ + +-/* +- * ablkcipher_edesc - s/w-extended ablkcipher descriptor +- * @src_nents: number of segments in input scatterlist +- * @dst_nents: number of segments in output scatterlist +- * @iv_dma: dma address of iv for checking continuity and link table +- * @qm_sg_bytes: length of dma mapped h/w link table +- * @qm_sg_dma: bus physical mapped address of h/w link table +- * @drv_req: driver-specific request structure +- * @sgt: the h/w link table, followed by IV +- */ +-struct ablkcipher_edesc { +- int src_nents; +- int dst_nents; +- dma_addr_t iv_dma; +- int qm_sg_bytes; +- dma_addr_t qm_sg_dma; +- struct caam_drv_req drv_req; +- struct qm_sg_entry sgt[0]; +-}; + if (!ctx->cdata.keylen || !ctx->authsize) + return 0; + + ctx->cdata.key_virt = ctx->key; -+ -+ /* + +-static struct caam_drv_ctx *get_drv_ctx(struct caam_ctx *ctx, +- enum optype type) +-{ + /* +- * This function is called on the fast path with values of 'type' +- * known at compile time. Invalid arguments are not expected and +- * thus no checks are made. + * Job Descriptor and Shared Descriptor + * must fit into the 64-word Descriptor h/w Buffer -+ */ + */ +- struct caam_drv_ctx *drv_ctx = ctx->drv_ctx[type]; +- u32 *desc; + if (rem_bytes >= DESC_QI_RFC4106_ENC_LEN) { + ctx->cdata.key_inline = true; + } else { + ctx->cdata.key_inline = false; + ctx->cdata.key_dma = ctx->key_dma; + } -+ + +- if (unlikely(!drv_ctx)) { +- spin_lock(&ctx->lock); + cnstr_shdsc_rfc4106_encap(ctx->sh_desc_enc, &ctx->cdata, ivsize, + ctx->authsize, true); -+ + +- /* Read again to check if some other core init drv_ctx */ +- drv_ctx = ctx->drv_ctx[type]; +- if (!drv_ctx) { +- int cpu; + /* + * Job Descriptor and Shared Descriptor + * must fit into the 64-word Descriptor h/w Buffer @@ -3450,7 +4240,13 @@ Signed-off-by: Biwen Li + ctx->cdata.key_inline = false; + ctx->cdata.key_dma = ctx->key_dma; + } -+ + +- if (type == ENCRYPT) +- desc = ctx->sh_desc_enc; +- else if (type == DECRYPT) +- desc = ctx->sh_desc_dec; +- else /* (type == GIVENCRYPT) */ +- desc = ctx->sh_desc_givenc; + cnstr_shdsc_rfc4106_decap(ctx->sh_desc_dec, &ctx->cdata, ivsize, + ctx->authsize, true); + @@ -3622,43 +4418,279 @@ Signed-off-by: Biwen Li + return 0; +} + - static int ablkcipher_setkey(struct crypto_ablkcipher *ablkcipher, - const u8 *key, unsigned int keylen) - { -@@ -414,6 +902,29 @@ struct aead_edesc { - }; - - /* -+ * tls_edesc - s/w-extended tls descriptor -+ * @src_nents: number of segments in input scatterlist -+ * @dst_nents: number of segments in output scatterlist -+ * @iv_dma: dma address of iv for checking continuity and link table -+ * @qm_sg_bytes: length of dma mapped h/w link table -+ * @tmp: array of scatterlists used by 'scatterwalk_ffwd' -+ * @qm_sg_dma: bus physical mapped address of h/w link table -+ * @drv_req: driver-specific request structure -+ * @sgt: the h/w link table, followed by IV -+ */ -+struct tls_edesc { -+ int src_nents; -+ int dst_nents; -+ dma_addr_t iv_dma; -+ int qm_sg_bytes; -+ dma_addr_t qm_sg_dma; -+ struct scatterlist tmp[2]; -+ struct scatterlist *dst; ++static int ablkcipher_setkey(struct crypto_ablkcipher *ablkcipher, ++ const u8 *key, unsigned int keylen) ++{ ++ struct caam_ctx *ctx = crypto_ablkcipher_ctx(ablkcipher); ++ struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablkcipher); ++ const char *alg_name = crypto_tfm_alg_name(tfm); ++ struct device *jrdev = ctx->jrdev; ++ unsigned int ivsize = crypto_ablkcipher_ivsize(ablkcipher); ++ u32 ctx1_iv_off = 0; ++ const bool ctr_mode = ((ctx->cdata.algtype & OP_ALG_AAI_MASK) == ++ OP_ALG_AAI_CTR_MOD128); ++ const bool is_rfc3686 = (ctr_mode && strstr(alg_name, "rfc3686")); ++ int ret = 0; ++ ++ memcpy(ctx->key, key, keylen); ++#ifdef DEBUG ++ print_hex_dump(KERN_ERR, "key in @" __stringify(__LINE__)": ", ++ DUMP_PREFIX_ADDRESS, 16, 4, key, keylen, 1); ++#endif ++ /* ++ * AES-CTR needs to load IV in CONTEXT1 reg ++ * at an offset of 128bits (16bytes) ++ * CONTEXT1[255:128] = IV ++ */ ++ if (ctr_mode) ++ ctx1_iv_off = 16; ++ ++ /* ++ * RFC3686 specific: ++ * | CONTEXT1[255:128] = {NONCE, IV, COUNTER} ++ * | *key = {KEY, NONCE} ++ */ ++ if (is_rfc3686) { ++ ctx1_iv_off = 16 + CTR_RFC3686_NONCE_SIZE; ++ keylen -= CTR_RFC3686_NONCE_SIZE; ++ } ++ ++ dma_sync_single_for_device(jrdev, ctx->key_dma, keylen, DMA_TO_DEVICE); ++ ctx->cdata.keylen = keylen; ++ ctx->cdata.key_virt = ctx->key; ++ ctx->cdata.key_inline = true; ++ ++ /* ablkcipher encrypt, decrypt, givencrypt shared descriptors */ ++ cnstr_shdsc_ablkcipher_encap(ctx->sh_desc_enc, &ctx->cdata, ivsize, ++ is_rfc3686, ctx1_iv_off); ++ cnstr_shdsc_ablkcipher_decap(ctx->sh_desc_dec, &ctx->cdata, ivsize, ++ is_rfc3686, ctx1_iv_off); ++ cnstr_shdsc_ablkcipher_givencap(ctx->sh_desc_givenc, &ctx->cdata, ++ ivsize, is_rfc3686, ctx1_iv_off); ++ ++ /* Now update the driver contexts with the new shared descriptor */ ++ if (ctx->drv_ctx[ENCRYPT]) { ++ ret = caam_drv_ctx_update(ctx->drv_ctx[ENCRYPT], ++ ctx->sh_desc_enc); ++ if (ret) { ++ dev_err(jrdev, "driver enc context update failed\n"); ++ goto badkey; ++ } ++ } ++ ++ if (ctx->drv_ctx[DECRYPT]) { ++ ret = caam_drv_ctx_update(ctx->drv_ctx[DECRYPT], ++ ctx->sh_desc_dec); ++ if (ret) { ++ dev_err(jrdev, "driver dec context update failed\n"); ++ goto badkey; ++ } ++ } ++ ++ if (ctx->drv_ctx[GIVENCRYPT]) { ++ ret = caam_drv_ctx_update(ctx->drv_ctx[GIVENCRYPT], ++ ctx->sh_desc_givenc); ++ if (ret) { ++ dev_err(jrdev, "driver givenc context update failed\n"); ++ goto badkey; ++ } ++ } ++ ++ return ret; ++badkey: ++ crypto_ablkcipher_set_flags(ablkcipher, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++} ++ ++static int xts_ablkcipher_setkey(struct crypto_ablkcipher *ablkcipher, ++ const u8 *key, unsigned int keylen) ++{ ++ struct caam_ctx *ctx = crypto_ablkcipher_ctx(ablkcipher); ++ struct device *jrdev = ctx->jrdev; ++ int ret = 0; ++ ++ if (keylen != 2 * AES_MIN_KEY_SIZE && keylen != 2 * AES_MAX_KEY_SIZE) { ++ dev_err(jrdev, "key size mismatch\n"); ++ goto badkey; ++ } ++ ++ memcpy(ctx->key, key, keylen); ++ dma_sync_single_for_device(jrdev, ctx->key_dma, keylen, DMA_TO_DEVICE); ++ ctx->cdata.keylen = keylen; ++ ctx->cdata.key_virt = ctx->key; ++ ctx->cdata.key_inline = true; ++ ++ /* xts ablkcipher encrypt, decrypt shared descriptors */ ++ cnstr_shdsc_xts_ablkcipher_encap(ctx->sh_desc_enc, &ctx->cdata); ++ cnstr_shdsc_xts_ablkcipher_decap(ctx->sh_desc_dec, &ctx->cdata); ++ ++ /* Now update the driver contexts with the new shared descriptor */ ++ if (ctx->drv_ctx[ENCRYPT]) { ++ ret = caam_drv_ctx_update(ctx->drv_ctx[ENCRYPT], ++ ctx->sh_desc_enc); ++ if (ret) { ++ dev_err(jrdev, "driver enc context update failed\n"); ++ goto badkey; ++ } ++ } ++ ++ if (ctx->drv_ctx[DECRYPT]) { ++ ret = caam_drv_ctx_update(ctx->drv_ctx[DECRYPT], ++ ctx->sh_desc_dec); ++ if (ret) { ++ dev_err(jrdev, "driver dec context update failed\n"); ++ goto badkey; ++ } ++ } ++ ++ return ret; ++badkey: ++ crypto_ablkcipher_set_flags(ablkcipher, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++} ++ ++/* ++ * aead_edesc - s/w-extended aead descriptor ++ * @src_nents: number of segments in input scatterlist ++ * @dst_nents: number of segments in output scatterlist ++ * @iv_dma: dma address of iv for checking continuity and link table ++ * @qm_sg_bytes: length of dma mapped h/w link table ++ * @qm_sg_dma: bus physical mapped address of h/w link table ++ * @assoclen: associated data length, in CAAM endianness ++ * @assoclen_dma: bus physical mapped address of req->assoclen ++ * @drv_req: driver-specific request structure ++ * @sgt: the h/w link table, followed by IV ++ */ ++struct aead_edesc { ++ int src_nents; ++ int dst_nents; ++ dma_addr_t iv_dma; ++ int qm_sg_bytes; ++ dma_addr_t qm_sg_dma; ++ unsigned int assoclen; ++ dma_addr_t assoclen_dma; + struct caam_drv_req drv_req; + struct qm_sg_entry sgt[0]; +}; + +/* - * ablkcipher_edesc - s/w-extended ablkcipher descriptor - * @src_nents: number of segments in input scatterlist - * @dst_nents: number of segments in output scatterlist -@@ -508,6 +1019,19 @@ static void aead_unmap(struct device *de - dma_unmap_single(dev, edesc->assoclen_dma, 4, DMA_TO_DEVICE); - } - ++ * tls_edesc - s/w-extended tls descriptor ++ * @src_nents: number of segments in input scatterlist ++ * @dst_nents: number of segments in output scatterlist ++ * @iv_dma: dma address of iv for checking continuity and link table ++ * @qm_sg_bytes: length of dma mapped h/w link table ++ * @tmp: array of scatterlists used by 'scatterwalk_ffwd' ++ * @qm_sg_dma: bus physical mapped address of h/w link table ++ * @drv_req: driver-specific request structure ++ * @sgt: the h/w link table, followed by IV ++ */ ++struct tls_edesc { ++ int src_nents; ++ int dst_nents; ++ dma_addr_t iv_dma; ++ int qm_sg_bytes; ++ dma_addr_t qm_sg_dma; ++ struct scatterlist tmp[2]; ++ struct scatterlist *dst; ++ struct caam_drv_req drv_req; ++ struct qm_sg_entry sgt[0]; ++}; ++ ++/* ++ * ablkcipher_edesc - s/w-extended ablkcipher descriptor ++ * @src_nents: number of segments in input scatterlist ++ * @dst_nents: number of segments in output scatterlist ++ * @iv_dma: dma address of iv for checking continuity and link table ++ * @qm_sg_bytes: length of dma mapped h/w link table ++ * @qm_sg_dma: bus physical mapped address of h/w link table ++ * @drv_req: driver-specific request structure ++ * @sgt: the h/w link table, followed by IV ++ */ ++struct ablkcipher_edesc { ++ int src_nents; ++ int dst_nents; ++ dma_addr_t iv_dma; ++ int qm_sg_bytes; ++ dma_addr_t qm_sg_dma; ++ struct caam_drv_req drv_req; ++ struct qm_sg_entry sgt[0]; ++}; ++ ++static struct caam_drv_ctx *get_drv_ctx(struct caam_ctx *ctx, ++ enum optype type) ++{ ++ /* ++ * This function is called on the fast path with values of 'type' ++ * known at compile time. Invalid arguments are not expected and ++ * thus no checks are made. ++ */ ++ struct caam_drv_ctx *drv_ctx = ctx->drv_ctx[type]; ++ u32 *desc; ++ ++ if (unlikely(!drv_ctx)) { ++ spin_lock(&ctx->lock); ++ ++ /* Read again to check if some other core init drv_ctx */ ++ drv_ctx = ctx->drv_ctx[type]; ++ if (!drv_ctx) { ++ int cpu; ++ ++ if (type == ENCRYPT) ++ desc = ctx->sh_desc_enc; ++ else if (type == DECRYPT) ++ desc = ctx->sh_desc_dec; ++ else /* (type == GIVENCRYPT) */ ++ desc = ctx->sh_desc_givenc; ++ ++ cpu = smp_processor_id(); ++ drv_ctx = caam_drv_ctx_init(ctx->qidev, &cpu, desc); ++ if (likely(!IS_ERR_OR_NULL(drv_ctx))) ++ drv_ctx->op_type = type; ++ ++ ctx->drv_ctx[type] = drv_ctx; ++ } ++ ++ spin_unlock(&ctx->lock); ++ } ++ ++ return drv_ctx; ++} ++ ++static void caam_unmap(struct device *dev, struct scatterlist *src, ++ struct scatterlist *dst, int src_nents, ++ int dst_nents, dma_addr_t iv_dma, int ivsize, ++ enum optype op_type, dma_addr_t qm_sg_dma, ++ int qm_sg_bytes) ++{ ++ if (dst != src) { ++ if (src_nents) ++ dma_unmap_sg(dev, src, src_nents, DMA_TO_DEVICE); ++ dma_unmap_sg(dev, dst, dst_nents, DMA_FROM_DEVICE); ++ } else { ++ dma_unmap_sg(dev, src, src_nents, DMA_BIDIRECTIONAL); ++ } ++ ++ if (iv_dma) ++ dma_unmap_single(dev, iv_dma, ivsize, ++ op_type == GIVENCRYPT ? DMA_FROM_DEVICE : ++ DMA_TO_DEVICE); ++ if (qm_sg_bytes) ++ dma_unmap_single(dev, qm_sg_dma, qm_sg_bytes, DMA_TO_DEVICE); ++} ++ ++static void aead_unmap(struct device *dev, ++ struct aead_edesc *edesc, ++ struct aead_request *req) ++{ ++ struct crypto_aead *aead = crypto_aead_reqtfm(req); ++ int ivsize = crypto_aead_ivsize(aead); ++ ++ caam_unmap(dev, req->src, req->dst, edesc->src_nents, edesc->dst_nents, ++ edesc->iv_dma, ivsize, edesc->drv_req.drv_ctx->op_type, ++ edesc->qm_sg_dma, edesc->qm_sg_bytes); ++ dma_unmap_single(dev, edesc->assoclen_dma, 4, DMA_TO_DEVICE); ++} ++ +static void tls_unmap(struct device *dev, + struct tls_edesc *edesc, + struct aead_request *req) @@ -3672,53 +4704,22 @@ Signed-off-by: Biwen Li + edesc->qm_sg_bytes); +} + - static void ablkcipher_unmap(struct device *dev, - struct ablkcipher_edesc *edesc, - struct ablkcipher_request *req) -@@ -532,8 +1056,18 @@ static void aead_done(struct caam_drv_re - qidev = caam_ctx->qidev; - - if (unlikely(status)) { -+ u32 ssrc = status & JRSTA_SSRC_MASK; -+ u8 err_id = status & JRSTA_CCBERR_ERRID_MASK; -+ - caam_jr_strstatus(qidev, status); -- ecode = -EIO; -+ /* -+ * verify hw auth check passed else return -EBADMSG -+ */ -+ if (ssrc == JRSTA_SSRC_CCB_ERROR && -+ err_id == JRSTA_CCBERR_ERRID_ICVCHK) -+ ecode = -EBADMSG; -+ else -+ ecode = -EIO; - } - - edesc = container_of(drv_req, typeof(*edesc), drv_req); -@@ -785,6 +1319,260 @@ static int aead_decrypt(struct aead_requ - return aead_crypt(req, false); - } - -+static int ipsec_gcm_encrypt(struct aead_request *req) ++static void ablkcipher_unmap(struct device *dev, ++ struct ablkcipher_edesc *edesc, ++ struct ablkcipher_request *req) +{ -+ if (req->assoclen < 8) -+ return -EINVAL; ++ struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req); ++ int ivsize = crypto_ablkcipher_ivsize(ablkcipher); + -+ return aead_crypt(req, true); ++ caam_unmap(dev, req->src, req->dst, edesc->src_nents, edesc->dst_nents, ++ edesc->iv_dma, ivsize, edesc->drv_req.drv_ctx->op_type, ++ edesc->qm_sg_dma, edesc->qm_sg_bytes); +} + -+static int ipsec_gcm_decrypt(struct aead_request *req) -+{ -+ if (req->assoclen < 8) -+ return -EINVAL; -+ -+ return aead_crypt(req, false); -+} -+ -+static void tls_done(struct caam_drv_req *drv_req, u32 status) ++static void aead_done(struct caam_drv_req *drv_req, u32 status) +{ + struct device *qidev; -+ struct tls_edesc *edesc; ++ struct aead_edesc *edesc; + struct aead_request *aead_req = drv_req->app_ctx; + struct crypto_aead *aead = crypto_aead_reqtfm(aead_req); + struct caam_ctx *caam_ctx = crypto_aead_ctx(aead); @@ -3727,56 +4728,56 @@ Signed-off-by: Biwen Li + qidev = caam_ctx->qidev; + + if (unlikely(status)) { ++ u32 ssrc = status & JRSTA_SSRC_MASK; ++ u8 err_id = status & JRSTA_CCBERR_ERRID_MASK; ++ + caam_jr_strstatus(qidev, status); -+ ecode = -EIO; ++ /* ++ * verify hw auth check passed else return -EBADMSG ++ */ ++ if (ssrc == JRSTA_SSRC_CCB_ERROR && ++ err_id == JRSTA_CCBERR_ERRID_ICVCHK) ++ ecode = -EBADMSG; ++ else ++ ecode = -EIO; + } + + edesc = container_of(drv_req, typeof(*edesc), drv_req); -+ tls_unmap(qidev, edesc, aead_req); ++ aead_unmap(qidev, edesc, aead_req); + + aead_request_complete(aead_req, ecode); + qi_cache_free(edesc); +} + +/* -+ * allocate and map the tls extended descriptor ++ * allocate and map the aead extended descriptor + */ -+static struct tls_edesc *tls_edesc_alloc(struct aead_request *req, bool encrypt) ++static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, ++ bool encrypt) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct caam_ctx *ctx = crypto_aead_ctx(aead); -+ unsigned int blocksize = crypto_aead_blocksize(aead); -+ unsigned int padsize, authsize; + struct caam_aead_alg *alg = container_of(crypto_aead_alg(aead), + typeof(*alg), aead); + struct device *qidev = ctx->qidev; + gfp_t flags = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? -+ GFP_KERNEL : GFP_ATOMIC; ++ GFP_KERNEL : GFP_ATOMIC; + int src_nents, mapped_src_nents, dst_nents = 0, mapped_dst_nents = 0; -+ struct tls_edesc *edesc; -+ dma_addr_t qm_sg_dma, iv_dma = 0; -+ int ivsize = 0; -+ u8 *iv; -+ int qm_sg_index, qm_sg_ents = 0, qm_sg_bytes; -+ int in_len, out_len; -+ struct qm_sg_entry *sg_table, *fd_sgt; -+ struct caam_drv_ctx *drv_ctx; -+ enum optype op_type = encrypt ? ENCRYPT : DECRYPT; -+ struct scatterlist *dst; -+ -+ if (encrypt) { -+ padsize = blocksize - ((req->cryptlen + ctx->authsize) % -+ blocksize); -+ authsize = ctx->authsize + padsize; -+ } else { -+ authsize = ctx->authsize; -+ } ++ struct aead_edesc *edesc; ++ dma_addr_t qm_sg_dma, iv_dma = 0; ++ int ivsize = 0; ++ unsigned int authsize = ctx->authsize; ++ int qm_sg_index = 0, qm_sg_ents = 0, qm_sg_bytes; ++ int in_len, out_len; ++ struct qm_sg_entry *sg_table, *fd_sgt; ++ struct caam_drv_ctx *drv_ctx; ++ enum optype op_type = encrypt ? ENCRYPT : DECRYPT; + + drv_ctx = get_drv_ctx(ctx, op_type); + if (unlikely(IS_ERR_OR_NULL(drv_ctx))) -+ return (struct tls_edesc *)drv_ctx; ++ return (struct aead_edesc *)drv_ctx; + -+ /* allocate space for base edesc, link tables and IV */ ++ /* allocate space for base edesc and hw desc commands, link tables */ + edesc = qi_cache_alloc(GFP_DMA | flags); + if (unlikely(!edesc)) { + dev_err(qidev, "could not allocate extended descriptor\n"); @@ -3786,7 +4787,7 @@ Signed-off-by: Biwen Li + if (likely(req->src == req->dst)) { + src_nents = sg_nents_for_len(req->src, req->assoclen + + req->cryptlen + -+ (encrypt ? authsize : 0)); ++ (encrypt ? authsize : 0)); + if (unlikely(src_nents < 0)) { + dev_err(qidev, "Insufficient bytes (%d) in src S/G\n", + req->assoclen + req->cryptlen + @@ -3802,7 +4803,6 @@ Signed-off-by: Biwen Li + qi_cache_free(edesc); + return ERR_PTR(-ENOMEM); + } -+ dst = req->dst; + } else { + src_nents = sg_nents_for_len(req->src, req->assoclen + + req->cryptlen); @@ -3813,13 +4813,14 @@ Signed-off-by: Biwen Li + return ERR_PTR(src_nents); + } + -+ dst = scatterwalk_ffwd(edesc->tmp, req->dst, req->assoclen); -+ dst_nents = sg_nents_for_len(dst, req->cryptlen + -+ (encrypt ? authsize : 0)); ++ dst_nents = sg_nents_for_len(req->dst, req->assoclen + ++ req->cryptlen + ++ (encrypt ? authsize : ++ (-authsize))); + if (unlikely(dst_nents < 0)) { + dev_err(qidev, "Insufficient bytes (%d) in dst S/G\n", -+ req->cryptlen + -+ (encrypt ? authsize : 0)); ++ req->assoclen + req->cryptlen + ++ (encrypt ? authsize : (-authsize))); + qi_cache_free(edesc); + return ERR_PTR(dst_nents); + } @@ -3836,7 +4837,7 @@ Signed-off-by: Biwen Li + mapped_src_nents = 0; + } + -+ mapped_dst_nents = dma_map_sg(qidev, dst, dst_nents, ++ mapped_dst_nents = dma_map_sg(qidev, req->dst, dst_nents, + DMA_FROM_DEVICE); + if (unlikely(!mapped_dst_nents)) { + dev_err(qidev, "unable to map destination\n"); @@ -3846,51 +4847,95 @@ Signed-off-by: Biwen Li + } + } + ++ if ((alg->caam.rfc3686 && encrypt) || !alg->caam.geniv) ++ ivsize = crypto_aead_ivsize(aead); ++ + /* -+ * Create S/G table: IV, src, dst. ++ * Create S/G table: req->assoclen, [IV,] req->src [, req->dst]. + * Input is not contiguous. ++ * HW reads 4 S/G entries at a time; make sure the reads don't go beyond ++ * the end of the table by allocating more S/G entries. Logic: ++ * if (src != dst && output S/G) ++ * pad output S/G, if needed ++ * else if (src == dst && S/G) ++ * overlapping S/Gs; pad one of them ++ * else if (input S/G) ... ++ * pad input S/G, if needed + */ -+ qm_sg_ents = 1 + mapped_src_nents + -+ (mapped_dst_nents > 1 ? mapped_dst_nents : 0); ++ qm_sg_ents = 1 + !!ivsize + mapped_src_nents; ++ if (mapped_dst_nents > 1) ++ qm_sg_ents += ALIGN(mapped_dst_nents, 4); ++ else if ((req->src == req->dst) && (mapped_src_nents > 1)) ++ qm_sg_ents = max(ALIGN(qm_sg_ents, 4), ++ 1 + !!ivsize + ALIGN(mapped_src_nents, 4)); ++ else ++ qm_sg_ents = ALIGN(qm_sg_ents, 4); ++ + sg_table = &edesc->sgt[0]; + qm_sg_bytes = qm_sg_ents * sizeof(*sg_table); -+ -+ ivsize = crypto_aead_ivsize(aead); -+ iv = (u8 *)(sg_table + qm_sg_ents); -+ /* Make sure IV is located in a DMAable area */ -+ memcpy(iv, req->iv, ivsize); -+ iv_dma = dma_map_single(qidev, iv, ivsize, DMA_TO_DEVICE); -+ if (dma_mapping_error(qidev, iv_dma)) { -+ dev_err(qidev, "unable to map IV\n"); -+ caam_unmap(qidev, req->src, dst, src_nents, dst_nents, 0, 0, 0, -+ 0, 0); ++ if (unlikely(offsetof(struct aead_edesc, sgt) + qm_sg_bytes + ivsize > ++ CAAM_QI_MEMCACHE_SIZE)) { ++ dev_err(qidev, "No space for %d S/G entries and/or %dB IV\n", ++ qm_sg_ents, ivsize); ++ caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, 0, ++ 0, 0, 0, 0); + qi_cache_free(edesc); + return ERR_PTR(-ENOMEM); + } + ++ if (ivsize) { ++ u8 *iv = (u8 *)(sg_table + qm_sg_ents); ++ ++ /* Make sure IV is located in a DMAable area */ ++ memcpy(iv, req->iv, ivsize); ++ ++ iv_dma = dma_map_single(qidev, iv, ivsize, DMA_TO_DEVICE); ++ if (dma_mapping_error(qidev, iv_dma)) { ++ dev_err(qidev, "unable to map IV\n"); ++ caam_unmap(qidev, req->src, req->dst, src_nents, ++ dst_nents, 0, 0, 0, 0, 0); ++ qi_cache_free(edesc); ++ return ERR_PTR(-ENOMEM); ++ } ++ } ++ + edesc->src_nents = src_nents; + edesc->dst_nents = dst_nents; -+ edesc->dst = dst; + edesc->iv_dma = iv_dma; + edesc->drv_req.app_ctx = req; -+ edesc->drv_req.cbk = tls_done; ++ edesc->drv_req.cbk = aead_done; + edesc->drv_req.drv_ctx = drv_ctx; + -+ dma_to_qm_sg_one(sg_table, iv_dma, ivsize, 0); -+ qm_sg_index = 1; ++ edesc->assoclen = cpu_to_caam32(req->assoclen); ++ edesc->assoclen_dma = dma_map_single(qidev, &edesc->assoclen, 4, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(qidev, edesc->assoclen_dma)) { ++ dev_err(qidev, "unable to map assoclen\n"); ++ caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, ++ iv_dma, ivsize, op_type, 0, 0); ++ qi_cache_free(edesc); ++ return ERR_PTR(-ENOMEM); ++ } + ++ dma_to_qm_sg_one(sg_table, edesc->assoclen_dma, 4, 0); ++ qm_sg_index++; ++ if (ivsize) { ++ dma_to_qm_sg_one(sg_table + qm_sg_index, iv_dma, ivsize, 0); ++ qm_sg_index++; ++ } + sg_to_qm_sg_last(req->src, mapped_src_nents, sg_table + qm_sg_index, 0); + qm_sg_index += mapped_src_nents; + + if (mapped_dst_nents > 1) -+ sg_to_qm_sg_last(dst, mapped_dst_nents, sg_table + ++ sg_to_qm_sg_last(req->dst, mapped_dst_nents, sg_table + + qm_sg_index, 0); + + qm_sg_dma = dma_map_single(qidev, sg_table, qm_sg_bytes, DMA_TO_DEVICE); + if (dma_mapping_error(qidev, qm_sg_dma)) { + dev_err(qidev, "unable to map S/G table\n"); -+ caam_unmap(qidev, req->src, dst, src_nents, dst_nents, iv_dma, -+ ivsize, op_type, 0, 0); ++ dma_unmap_single(qidev, edesc->assoclen_dma, 4, DMA_TO_DEVICE); ++ caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, ++ iv_dma, ivsize, op_type, 0, 0); + qi_cache_free(edesc); + return ERR_PTR(-ENOMEM); + } @@ -3898,65 +4943,458 @@ Signed-off-by: Biwen Li + edesc->qm_sg_dma = qm_sg_dma; + edesc->qm_sg_bytes = qm_sg_bytes; + -+ out_len = req->cryptlen + (encrypt ? authsize : 0); -+ in_len = ivsize + req->assoclen + req->cryptlen; ++ out_len = req->assoclen + req->cryptlen + ++ (encrypt ? ctx->authsize : (-ctx->authsize)); ++ in_len = 4 + ivsize + req->assoclen + req->cryptlen; + + fd_sgt = &edesc->drv_req.fd_sgt[0]; -+ + dma_to_qm_sg_one_last_ext(&fd_sgt[1], qm_sg_dma, in_len, 0); + -+ if (req->dst == req->src) -+ dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma + -+ (sg_nents_for_len(req->src, req->assoclen) + -+ 1) * sizeof(*sg_table), out_len, 0); -+ else if (mapped_dst_nents == 1) -+ dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(dst), out_len, 0); -+ else ++ if (req->dst == req->src) { ++ if (mapped_src_nents == 1) ++ dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(req->src), ++ out_len, 0); ++ else ++ dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma + ++ (1 + !!ivsize) * sizeof(*sg_table), ++ out_len, 0); ++ } else if (mapped_dst_nents == 1) { ++ dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(req->dst), out_len, ++ 0); ++ } else { + dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma + sizeof(*sg_table) * + qm_sg_index, out_len, 0); ++ } + + return edesc; +} -+ -+static int tls_crypt(struct aead_request *req, bool encrypt) + +- cpu = smp_processor_id(); +- drv_ctx = caam_drv_ctx_init(ctx->qidev, &cpu, desc); +- if (likely(!IS_ERR_OR_NULL(drv_ctx))) +- drv_ctx->op_type = type; ++static inline int aead_crypt(struct aead_request *req, bool encrypt) +{ -+ struct tls_edesc *edesc; ++ struct aead_edesc *edesc; + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct caam_ctx *ctx = crypto_aead_ctx(aead); + int ret; -+ + +- ctx->drv_ctx[type] = drv_ctx; +- } + if (unlikely(caam_congested)) + return -EAGAIN; -+ -+ edesc = tls_edesc_alloc(req, encrypt); + +- spin_unlock(&ctx->lock); ++ /* allocate extended descriptor */ ++ edesc = aead_edesc_alloc(req, encrypt); + if (IS_ERR_OR_NULL(edesc)) + return PTR_ERR(edesc); + ++ /* Create and submit job descriptor */ + ret = caam_qi_enqueue(ctx->qidev, &edesc->drv_req); + if (!ret) { + ret = -EINPROGRESS; + } else { -+ tls_unmap(ctx->qidev, edesc, req); ++ aead_unmap(ctx->qidev, edesc, req); + qi_cache_free(edesc); -+ } -+ + } + +- return drv_ctx; + return ret; + } + +-static void caam_unmap(struct device *dev, struct scatterlist *src, +- struct scatterlist *dst, int src_nents, +- int dst_nents, dma_addr_t iv_dma, int ivsize, +- enum optype op_type, dma_addr_t qm_sg_dma, +- int qm_sg_bytes) ++static int aead_encrypt(struct aead_request *req) + { +- if (dst != src) { +- if (src_nents) +- dma_unmap_sg(dev, src, src_nents, DMA_TO_DEVICE); +- dma_unmap_sg(dev, dst, dst_nents, DMA_FROM_DEVICE); +- } else { +- dma_unmap_sg(dev, src, src_nents, DMA_BIDIRECTIONAL); +- } ++ return aead_crypt(req, true); +} + +- if (iv_dma) +- dma_unmap_single(dev, iv_dma, ivsize, +- op_type == GIVENCRYPT ? DMA_FROM_DEVICE : +- DMA_TO_DEVICE); +- if (qm_sg_bytes) +- dma_unmap_single(dev, qm_sg_dma, qm_sg_bytes, DMA_TO_DEVICE); ++static int aead_decrypt(struct aead_request *req) ++{ ++ return aead_crypt(req, false); + } + +-static void aead_unmap(struct device *dev, +- struct aead_edesc *edesc, +- struct aead_request *req) ++static int ipsec_gcm_encrypt(struct aead_request *req) + { +- struct crypto_aead *aead = crypto_aead_reqtfm(req); +- int ivsize = crypto_aead_ivsize(aead); ++ if (req->assoclen < 8) ++ return -EINVAL; + +- caam_unmap(dev, req->src, req->dst, edesc->src_nents, edesc->dst_nents, +- edesc->iv_dma, ivsize, edesc->drv_req.drv_ctx->op_type, +- edesc->qm_sg_dma, edesc->qm_sg_bytes); +- dma_unmap_single(dev, edesc->assoclen_dma, 4, DMA_TO_DEVICE); ++ return aead_crypt(req, true); + } + +-static void ablkcipher_unmap(struct device *dev, +- struct ablkcipher_edesc *edesc, +- struct ablkcipher_request *req) ++static int ipsec_gcm_decrypt(struct aead_request *req) + { +- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req); +- int ivsize = crypto_ablkcipher_ivsize(ablkcipher); ++ if (req->assoclen < 8) ++ return -EINVAL; + +- caam_unmap(dev, req->src, req->dst, edesc->src_nents, edesc->dst_nents, +- edesc->iv_dma, ivsize, edesc->drv_req.drv_ctx->op_type, +- edesc->qm_sg_dma, edesc->qm_sg_bytes); ++ return aead_crypt(req, false); + } + +-static void aead_done(struct caam_drv_req *drv_req, u32 status) ++static void tls_done(struct caam_drv_req *drv_req, u32 status) + { + struct device *qidev; +- struct aead_edesc *edesc; ++ struct tls_edesc *edesc; + struct aead_request *aead_req = drv_req->app_ctx; + struct crypto_aead *aead = crypto_aead_reqtfm(aead_req); + struct caam_ctx *caam_ctx = crypto_aead_ctx(aead); +@@ -537,41 +1367,51 @@ static void aead_done(struct caam_drv_re + } + + edesc = container_of(drv_req, typeof(*edesc), drv_req); +- aead_unmap(qidev, edesc, aead_req); ++ tls_unmap(qidev, edesc, aead_req); + + aead_request_complete(aead_req, ecode); + qi_cache_free(edesc); + } + + /* +- * allocate and map the aead extended descriptor ++ * allocate and map the tls extended descriptor + */ +-static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, +- bool encrypt) ++static struct tls_edesc *tls_edesc_alloc(struct aead_request *req, bool encrypt) + { + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ unsigned int blocksize = crypto_aead_blocksize(aead); ++ unsigned int padsize, authsize; + struct caam_aead_alg *alg = container_of(crypto_aead_alg(aead), + typeof(*alg), aead); + struct device *qidev = ctx->qidev; + gfp_t flags = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? +- GFP_KERNEL : GFP_ATOMIC; ++ GFP_KERNEL : GFP_ATOMIC; + int src_nents, mapped_src_nents, dst_nents = 0, mapped_dst_nents = 0; +- struct aead_edesc *edesc; ++ struct tls_edesc *edesc; + dma_addr_t qm_sg_dma, iv_dma = 0; + int ivsize = 0; +- unsigned int authsize = ctx->authsize; +- int qm_sg_index = 0, qm_sg_ents = 0, qm_sg_bytes; ++ u8 *iv; ++ int qm_sg_index, qm_sg_ents = 0, qm_sg_bytes; + int in_len, out_len; + struct qm_sg_entry *sg_table, *fd_sgt; + struct caam_drv_ctx *drv_ctx; + enum optype op_type = encrypt ? ENCRYPT : DECRYPT; ++ struct scatterlist *dst; ++ ++ if (encrypt) { ++ padsize = blocksize - ((req->cryptlen + ctx->authsize) % ++ blocksize); ++ authsize = ctx->authsize + padsize; ++ } else { ++ authsize = ctx->authsize; ++ } + + drv_ctx = get_drv_ctx(ctx, op_type); + if (unlikely(IS_ERR_OR_NULL(drv_ctx))) +- return (struct aead_edesc *)drv_ctx; ++ return (struct tls_edesc *)drv_ctx; + +- /* allocate space for base edesc and hw desc commands, link tables */ ++ /* allocate space for base edesc, link tables and IV */ + edesc = qi_cache_alloc(GFP_DMA | flags); + if (unlikely(!edesc)) { + dev_err(qidev, "could not allocate extended descriptor\n"); +@@ -581,7 +1421,7 @@ static struct aead_edesc *aead_edesc_all + if (likely(req->src == req->dst)) { + src_nents = sg_nents_for_len(req->src, req->assoclen + + req->cryptlen + +- (encrypt ? authsize : 0)); ++ (encrypt ? authsize : 0)); + if (unlikely(src_nents < 0)) { + dev_err(qidev, "Insufficient bytes (%d) in src S/G\n", + req->assoclen + req->cryptlen + +@@ -597,6 +1437,7 @@ static struct aead_edesc *aead_edesc_all + qi_cache_free(edesc); + return ERR_PTR(-ENOMEM); + } ++ dst = req->dst; + } else { + src_nents = sg_nents_for_len(req->src, req->assoclen + + req->cryptlen); +@@ -607,14 +1448,13 @@ static struct aead_edesc *aead_edesc_all + return ERR_PTR(src_nents); + } + +- dst_nents = sg_nents_for_len(req->dst, req->assoclen + +- req->cryptlen + +- (encrypt ? authsize : +- (-authsize))); ++ dst = scatterwalk_ffwd(edesc->tmp, req->dst, req->assoclen); ++ dst_nents = sg_nents_for_len(dst, req->cryptlen + ++ (encrypt ? authsize : 0)); + if (unlikely(dst_nents < 0)) { + dev_err(qidev, "Insufficient bytes (%d) in dst S/G\n", +- req->assoclen + req->cryptlen + +- (encrypt ? authsize : (-authsize))); ++ req->cryptlen + ++ (encrypt ? authsize : 0)); + qi_cache_free(edesc); + return ERR_PTR(dst_nents); + } +@@ -631,7 +1471,7 @@ static struct aead_edesc *aead_edesc_all + mapped_src_nents = 0; + } + +- mapped_dst_nents = dma_map_sg(qidev, req->dst, dst_nents, ++ mapped_dst_nents = dma_map_sg(qidev, dst, dst_nents, + DMA_FROM_DEVICE); + if (unlikely(!mapped_dst_nents)) { + dev_err(qidev, "unable to map destination\n"); +@@ -641,80 +1481,51 @@ static struct aead_edesc *aead_edesc_all + } + } + +- if ((alg->caam.rfc3686 && encrypt) || !alg->caam.geniv) +- ivsize = crypto_aead_ivsize(aead); +- + /* +- * Create S/G table: req->assoclen, [IV,] req->src [, req->dst]. ++ * Create S/G table: IV, src, dst. + * Input is not contiguous. + */ +- qm_sg_ents = 1 + !!ivsize + mapped_src_nents + ++ qm_sg_ents = 1 + mapped_src_nents + + (mapped_dst_nents > 1 ? mapped_dst_nents : 0); + sg_table = &edesc->sgt[0]; + qm_sg_bytes = qm_sg_ents * sizeof(*sg_table); +- if (unlikely(offsetof(struct aead_edesc, sgt) + qm_sg_bytes + ivsize > +- CAAM_QI_MEMCACHE_SIZE)) { +- dev_err(qidev, "No space for %d S/G entries and/or %dB IV\n", +- qm_sg_ents, ivsize); +- caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, 0, +- 0, 0, 0, 0); ++ ++ ivsize = crypto_aead_ivsize(aead); ++ iv = (u8 *)(sg_table + qm_sg_ents); ++ /* Make sure IV is located in a DMAable area */ ++ memcpy(iv, req->iv, ivsize); ++ iv_dma = dma_map_single(qidev, iv, ivsize, DMA_TO_DEVICE); ++ if (dma_mapping_error(qidev, iv_dma)) { ++ dev_err(qidev, "unable to map IV\n"); ++ caam_unmap(qidev, req->src, dst, src_nents, dst_nents, 0, 0, 0, ++ 0, 0); + qi_cache_free(edesc); + return ERR_PTR(-ENOMEM); + } + +- if (ivsize) { +- u8 *iv = (u8 *)(sg_table + qm_sg_ents); +- +- /* Make sure IV is located in a DMAable area */ +- memcpy(iv, req->iv, ivsize); +- +- iv_dma = dma_map_single(qidev, iv, ivsize, DMA_TO_DEVICE); +- if (dma_mapping_error(qidev, iv_dma)) { +- dev_err(qidev, "unable to map IV\n"); +- caam_unmap(qidev, req->src, req->dst, src_nents, +- dst_nents, 0, 0, 0, 0, 0); +- qi_cache_free(edesc); +- return ERR_PTR(-ENOMEM); +- } +- } +- + edesc->src_nents = src_nents; + edesc->dst_nents = dst_nents; ++ edesc->dst = dst; + edesc->iv_dma = iv_dma; + edesc->drv_req.app_ctx = req; +- edesc->drv_req.cbk = aead_done; ++ edesc->drv_req.cbk = tls_done; + edesc->drv_req.drv_ctx = drv_ctx; + +- edesc->assoclen = cpu_to_caam32(req->assoclen); +- edesc->assoclen_dma = dma_map_single(qidev, &edesc->assoclen, 4, +- DMA_TO_DEVICE); +- if (dma_mapping_error(qidev, edesc->assoclen_dma)) { +- dev_err(qidev, "unable to map assoclen\n"); +- caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, +- iv_dma, ivsize, op_type, 0, 0); +- qi_cache_free(edesc); +- return ERR_PTR(-ENOMEM); +- } ++ dma_to_qm_sg_one(sg_table, iv_dma, ivsize, 0); ++ qm_sg_index = 1; + +- dma_to_qm_sg_one(sg_table, edesc->assoclen_dma, 4, 0); +- qm_sg_index++; +- if (ivsize) { +- dma_to_qm_sg_one(sg_table + qm_sg_index, iv_dma, ivsize, 0); +- qm_sg_index++; +- } + sg_to_qm_sg_last(req->src, mapped_src_nents, sg_table + qm_sg_index, 0); + qm_sg_index += mapped_src_nents; + + if (mapped_dst_nents > 1) +- sg_to_qm_sg_last(req->dst, mapped_dst_nents, sg_table + ++ sg_to_qm_sg_last(dst, mapped_dst_nents, sg_table + + qm_sg_index, 0); + + qm_sg_dma = dma_map_single(qidev, sg_table, qm_sg_bytes, DMA_TO_DEVICE); + if (dma_mapping_error(qidev, qm_sg_dma)) { + dev_err(qidev, "unable to map S/G table\n"); +- dma_unmap_single(qidev, edesc->assoclen_dma, 4, DMA_TO_DEVICE); +- caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, +- iv_dma, ivsize, op_type, 0, 0); ++ caam_unmap(qidev, req->src, dst, src_nents, dst_nents, iv_dma, ++ ivsize, op_type, 0, 0); + qi_cache_free(edesc); + return ERR_PTR(-ENOMEM); + } +@@ -722,35 +1533,29 @@ static struct aead_edesc *aead_edesc_all + edesc->qm_sg_dma = qm_sg_dma; + edesc->qm_sg_bytes = qm_sg_bytes; + +- out_len = req->assoclen + req->cryptlen + +- (encrypt ? ctx->authsize : (-ctx->authsize)); +- in_len = 4 + ivsize + req->assoclen + req->cryptlen; ++ out_len = req->cryptlen + (encrypt ? authsize : 0); ++ in_len = ivsize + req->assoclen + req->cryptlen; + + fd_sgt = &edesc->drv_req.fd_sgt[0]; + + dma_to_qm_sg_one_last_ext(&fd_sgt[1], qm_sg_dma, in_len, 0); + +- if (req->dst == req->src) { +- if (mapped_src_nents == 1) +- dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(req->src), +- out_len, 0); +- else +- dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma + +- (1 + !!ivsize) * sizeof(*sg_table), +- out_len, 0); +- } else if (mapped_dst_nents == 1) { +- dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(req->dst), out_len, +- 0); +- } else { ++ if (req->dst == req->src) ++ dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma + ++ (sg_nents_for_len(req->src, req->assoclen) + ++ 1) * sizeof(*sg_table), out_len, 0); ++ else if (mapped_dst_nents == 1) ++ dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(dst), out_len, 0); ++ else + dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma + sizeof(*sg_table) * + qm_sg_index, out_len, 0); +- } + + return edesc; + } + +-static inline int aead_crypt(struct aead_request *req, bool encrypt) ++static int tls_crypt(struct aead_request *req, bool encrypt) + { +- struct aead_edesc *edesc; ++ struct tls_edesc *edesc; + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct caam_ctx *ctx = crypto_aead_ctx(aead); + int ret; +@@ -758,31 +1563,29 @@ static inline int aead_crypt(struct aead + if (unlikely(caam_congested)) + return -EAGAIN; + +- /* allocate extended descriptor */ +- edesc = aead_edesc_alloc(req, encrypt); ++ edesc = tls_edesc_alloc(req, encrypt); + if (IS_ERR_OR_NULL(edesc)) + return PTR_ERR(edesc); + +- /* Create and submit job descriptor */ + ret = caam_qi_enqueue(ctx->qidev, &edesc->drv_req); + if (!ret) { + ret = -EINPROGRESS; + } else { +- aead_unmap(ctx->qidev, edesc, req); ++ tls_unmap(ctx->qidev, edesc, req); + qi_cache_free(edesc); + } + + return ret; + } + +-static int aead_encrypt(struct aead_request *req) +static int tls_encrypt(struct aead_request *req) -+{ + { +- return aead_crypt(req, true); + return tls_crypt(req, true); -+} -+ + } + +-static int aead_decrypt(struct aead_request *req) +static int tls_decrypt(struct aead_request *req) -+{ + { +- return aead_crypt(req, false); + return tls_crypt(req, false); -+} -+ + } + static void ablkcipher_done(struct caam_drv_req *drv_req, u32 status) - { - struct ablkcipher_edesc *edesc; -@@ -1308,6 +2096,61 @@ static struct caam_alg_template driver_a +@@ -900,7 +1703,24 @@ static struct ablkcipher_edesc *ablkciph + qm_sg_ents = 1 + mapped_src_nents; + dst_sg_idx = qm_sg_ents; + +- qm_sg_ents += mapped_dst_nents > 1 ? mapped_dst_nents : 0; ++ /* ++ * HW reads 4 S/G entries at a time; make sure the reads don't go beyond ++ * the end of the table by allocating more S/G entries. Logic: ++ * if (src != dst && output S/G) ++ * pad output S/G, if needed ++ * else if (src == dst && S/G) ++ * overlapping S/Gs; pad one of them ++ * else if (input S/G) ... ++ * pad input S/G, if needed ++ */ ++ if (mapped_dst_nents > 1) ++ qm_sg_ents += ALIGN(mapped_dst_nents, 4); ++ else if ((req->src == req->dst) && (mapped_src_nents > 1)) ++ qm_sg_ents = max(ALIGN(qm_sg_ents, 4), ++ 1 + ALIGN(mapped_src_nents, 4)); ++ else ++ qm_sg_ents = ALIGN(qm_sg_ents, 4); ++ + qm_sg_bytes = qm_sg_ents * sizeof(struct qm_sg_entry); + if (unlikely(offsetof(struct ablkcipher_edesc, sgt) + qm_sg_bytes + + ivsize > CAAM_QI_MEMCACHE_SIZE)) { +@@ -1308,6 +2128,61 @@ static struct caam_alg_template driver_a }; static struct caam_aead_alg driver_aeads[] = { @@ -4018,7 +5456,7 @@ Signed-off-by: Biwen Li /* single-pass ipsec_esp descriptor */ { .aead = { -@@ -2118,6 +2961,26 @@ static struct caam_aead_alg driver_aeads +@@ -2118,6 +2993,26 @@ static struct caam_aead_alg driver_aeads .geniv = true, } }, @@ -4045,7 +5483,7 @@ Signed-off-by: Biwen Li }; struct caam_crypto_alg { -@@ -2126,9 +2989,20 @@ struct caam_crypto_alg { +@@ -2126,9 +3021,21 @@ struct caam_crypto_alg { struct caam_alg_entry caam; }; @@ -4054,6 +5492,7 @@ Signed-off-by: Biwen Li + bool uses_dkp) { struct caam_drv_private *priv; ++ struct device *dev; + /* Digest sizes for MD5, SHA1, SHA-224, SHA-256, SHA-384, SHA-512 */ + static const u8 digest_size[] = { + MD5_DIGEST_SIZE, @@ -4067,27 +5506,36 @@ Signed-off-by: Biwen Li /* * distribute tfms across job rings to ensure in-order -@@ -2140,8 +3014,14 @@ static int caam_init_common(struct caam_ +@@ -2140,10 +3047,19 @@ static int caam_init_common(struct caam_ return PTR_ERR(ctx->jrdev); } +- ctx->key_dma = dma_map_single(ctx->jrdev, ctx->key, sizeof(ctx->key), +- DMA_TO_DEVICE); +- if (dma_mapping_error(ctx->jrdev, ctx->key_dma)) { +- dev_err(ctx->jrdev, "unable to map key\n"); + priv = dev_get_drvdata(ctx->jrdev->parent); -+ if (priv->era >= 6 && uses_dkp) ++ if (priv->era >= 6 && uses_dkp) { + ctx->dir = DMA_BIDIRECTIONAL; -+ else ++ dev = ctx->jrdev->parent; ++ } else { + ctx->dir = DMA_TO_DEVICE; ++ dev = ctx->jrdev; ++ } + - ctx->key_dma = dma_map_single(ctx->jrdev, ctx->key, sizeof(ctx->key), -- DMA_TO_DEVICE); ++ ctx->key_dma = dma_map_single(dev, ctx->key, sizeof(ctx->key), + ctx->dir); - if (dma_mapping_error(ctx->jrdev, ctx->key_dma)) { - dev_err(ctx->jrdev, "unable to map key\n"); ++ if (dma_mapping_error(dev, ctx->key_dma)) { ++ dev_err(dev, "unable to map key\n"); caam_jr_free(ctx->jrdev); -@@ -2152,7 +3032,22 @@ static int caam_init_common(struct caam_ + return -ENOMEM; + } +@@ -2152,8 +3068,23 @@ static int caam_init_common(struct caam_ ctx->cdata.algtype = OP_TYPE_CLASS1_ALG | caam->class1_alg_type; ctx->adata.algtype = OP_TYPE_CLASS2_ALG | caam->class2_alg_type; - priv = dev_get_drvdata(ctx->jrdev->parent); +- ctx->qidev = priv->qidev; + if (ctx->adata.algtype) { + op_id = (ctx->adata.algtype & OP_ALG_ALGSEL_SUBMASK) + >> OP_ALG_ALGSEL_SHIFT; @@ -4104,10 +5552,11 @@ Signed-off-by: Biwen Li + ctx->authsize = 0; + } + - ctx->qidev = priv->qidev; ++ ctx->qidev = ctx->jrdev->parent; spin_lock_init(&ctx->lock); -@@ -2170,7 +3065,7 @@ static int caam_cra_init(struct crypto_t + ctx->drv_ctx[ENCRYPT] = NULL; +@@ -2170,7 +3101,7 @@ static int caam_cra_init(struct crypto_t crypto_alg); struct caam_ctx *ctx = crypto_tfm_ctx(tfm); @@ -4116,7 +5565,7 @@ Signed-off-by: Biwen Li } static int caam_aead_init(struct crypto_aead *tfm) -@@ -2180,7 +3075,9 @@ static int caam_aead_init(struct crypto_ +@@ -2180,17 +3111,25 @@ static int caam_aead_init(struct crypto_ aead); struct caam_ctx *ctx = crypto_aead_ctx(tfm); @@ -4127,31 +5576,162 @@ Signed-off-by: Biwen Li } static void caam_exit_common(struct caam_ctx *ctx) -@@ -2189,8 +3086,7 @@ static void caam_exit_common(struct caam + { ++ struct device *dev; ++ + caam_drv_ctx_rel(ctx->drv_ctx[ENCRYPT]); caam_drv_ctx_rel(ctx->drv_ctx[DECRYPT]); caam_drv_ctx_rel(ctx->drv_ctx[GIVENCRYPT]); - dma_unmap_single(ctx->jrdev, ctx->key_dma, sizeof(ctx->key), - DMA_TO_DEVICE); -+ dma_unmap_single(ctx->jrdev, ctx->key_dma, sizeof(ctx->key), ctx->dir); ++ if (ctx->dir == DMA_BIDIRECTIONAL) ++ dev = ctx->jrdev->parent; ++ else ++ dev = ctx->jrdev; ++ ++ dma_unmap_single(dev, ctx->key_dma, sizeof(ctx->key), ctx->dir); caam_jr_free(ctx->jrdev); } -@@ -2315,6 +3211,11 @@ static int __init caam_qi_algapi_init(vo - if (!priv || !priv->qi_present) - return -ENODEV; +@@ -2206,7 +3145,7 @@ static void caam_aead_exit(struct crypto + } -+ if (caam_dpaa2) { -+ dev_info(ctrldev, "caam/qi frontend driver not suitable for DPAA 2.x, aborting...\n"); -+ return -ENODEV; -+ } -+ + static struct list_head alg_list; +-static void __exit caam_qi_algapi_exit(void) ++void caam_qi_algapi_exit(void) + { + struct caam_crypto_alg *t_alg, *n; + int i; +@@ -2282,53 +3221,48 @@ static void caam_aead_alg_init(struct ca + alg->exit = caam_aead_exit; + } + +-static int __init caam_qi_algapi_init(void) ++int caam_qi_algapi_init(struct device *ctrldev) + { +- struct device_node *dev_node; +- struct platform_device *pdev; +- struct device *ctrldev; +- struct caam_drv_private *priv; ++ struct caam_drv_private *priv = dev_get_drvdata(ctrldev); + int i = 0, err = 0; +- u32 cha_vid, cha_inst, des_inst, aes_inst, md_inst; ++ u32 aes_vid, aes_inst, des_inst, md_vid, md_inst; + unsigned int md_limit = SHA512_DIGEST_SIZE; + bool registered = false; + +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); +- if (!dev_node) { +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); +- if (!dev_node) +- return -ENODEV; +- } +- +- pdev = of_find_device_by_node(dev_node); +- of_node_put(dev_node); +- if (!pdev) +- return -ENODEV; +- +- ctrldev = &pdev->dev; +- priv = dev_get_drvdata(ctrldev); +- +- /* +- * If priv is NULL, it's probably because the caam driver wasn't +- * properly initialized (e.g. RNG4 init failed). Thus, bail out here. +- */ +- if (!priv || !priv->qi_present) +- return -ENODEV; +- INIT_LIST_HEAD(&alg_list); /* + * Register crypto algorithms the device supports. + * First, detect presence and attributes of DES, AES, and MD blocks. + */ +- cha_vid = rd_reg32(&priv->ctrl->perfmon.cha_id_ls); +- cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls); +- des_inst = (cha_inst & CHA_ID_LS_DES_MASK) >> CHA_ID_LS_DES_SHIFT; +- aes_inst = (cha_inst & CHA_ID_LS_AES_MASK) >> CHA_ID_LS_AES_SHIFT; +- md_inst = (cha_inst & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ if (priv->era < 10) { ++ u32 cha_vid, cha_inst; ++ ++ cha_vid = rd_reg32(&priv->ctrl->perfmon.cha_id_ls); ++ aes_vid = cha_vid & CHA_ID_LS_AES_MASK; ++ md_vid = (cha_vid & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ ++ cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls); ++ des_inst = (cha_inst & CHA_ID_LS_DES_MASK) >> ++ CHA_ID_LS_DES_SHIFT; ++ aes_inst = cha_inst & CHA_ID_LS_AES_MASK; ++ md_inst = (cha_inst & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ } else { ++ u32 aesa, mdha; ++ ++ aesa = rd_reg32(&priv->ctrl->vreg.aesa); ++ mdha = rd_reg32(&priv->ctrl->vreg.mdha); ++ ++ aes_vid = (aesa & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT; ++ md_vid = (mdha & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT; ++ ++ des_inst = rd_reg32(&priv->ctrl->vreg.desa) & CHA_VER_NUM_MASK; ++ aes_inst = aesa & CHA_VER_NUM_MASK; ++ md_inst = mdha & CHA_VER_NUM_MASK; ++ } + + /* If MD is present, limit digest size based on LP256 */ +- if (md_inst && ((cha_vid & CHA_ID_LS_MD_MASK) == CHA_ID_LS_MD_LP256)) ++ if (md_inst && md_vid == CHA_VER_VID_MD_LP256) + md_limit = SHA256_DIGEST_SIZE; + + for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { +@@ -2349,14 +3283,14 @@ static int __init caam_qi_algapi_init(vo + t_alg = caam_alg_alloc(alg); + if (IS_ERR(t_alg)) { + err = PTR_ERR(t_alg); +- dev_warn(priv->qidev, "%s alg allocation failed\n", ++ dev_warn(ctrldev, "%s alg allocation failed\n", + alg->driver_name); + continue; + } + + err = crypto_register_alg(&t_alg->crypto_alg); + if (err) { +- dev_warn(priv->qidev, "%s alg registration failed\n", ++ dev_warn(ctrldev, "%s alg registration failed\n", + t_alg->crypto_alg.cra_driver_name); + kfree(t_alg); + continue; +@@ -2388,8 +3322,7 @@ static int __init caam_qi_algapi_init(vo + * Check support for AES algorithms not available + * on LP devices. + */ +- if (((cha_vid & CHA_ID_LS_AES_MASK) == CHA_ID_LS_AES_LP) && +- (alg_aai == OP_ALG_AAI_GCM)) ++ if (aes_vid == CHA_VER_VID_AES_LP && alg_aai == OP_ALG_AAI_GCM) + continue; + + /* +@@ -2414,14 +3347,7 @@ static int __init caam_qi_algapi_init(vo + } + + if (registered) +- dev_info(priv->qidev, "algorithms registered in /proc/crypto\n"); ++ dev_info(ctrldev, "algorithms registered in /proc/crypto\n"); + + return err; + } +- +-module_init(caam_qi_algapi_init); +-module_exit(caam_qi_algapi_exit); +- +-MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("Support for crypto API using CAAM-QI backend"); +-MODULE_AUTHOR("Freescale Semiconductor"); --- /dev/null +++ b/drivers/crypto/caam/caamalg_qi2.c -@@ -0,0 +1,5691 @@ +@@ -0,0 +1,5843 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright 2015-2016 Freescale Semiconductor Inc. @@ -4179,13 +5759,6 @@ Signed-off-by: Biwen Li +#define CAAM_MAX_KEY_SIZE (AES_MAX_KEY_SIZE + CTR_RFC3686_NONCE_SIZE + \ + SHA512_DIGEST_SIZE * 2) + -+#ifndef CONFIG_CRYPTO_DEV_FSL_CAAM -+bool caam_little_end; -+EXPORT_SYMBOL(caam_little_end); -+bool caam_imx; -+EXPORT_SYMBOL(caam_imx); -+#endif -+ +/* + * This is a a cache of buffers, from which the users of CAAM QI driver + * can allocate short buffers. It's speedier than doing kmalloc on the hotpath. @@ -4639,7 +6212,15 @@ Signed-off-by: Biwen Li + edesc->dst_nents = dst_nents; + edesc->iv_dma = iv_dma; + -+ edesc->assoclen = cpu_to_caam32(req->assoclen); ++ if ((alg->caam.class1_alg_type & OP_ALG_ALGSEL_MASK) == ++ OP_ALG_ALGSEL_CHACHA20 && ivsize != CHACHAPOLY_IV_SIZE) ++ /* ++ * The associated data comes already with the IV but we need ++ * to skip it when we authenticate or encrypt... ++ */ ++ edesc->assoclen = cpu_to_caam32(req->assoclen - ivsize); ++ else ++ edesc->assoclen = cpu_to_caam32(req->assoclen); + edesc->assoclen_dma = dma_map_single(dev, &edesc->assoclen, 4, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, edesc->assoclen_dma)) { @@ -4709,6 +6290,68 @@ Signed-off-by: Biwen Li + return edesc; +} + ++static int chachapoly_set_sh_desc(struct crypto_aead *aead) ++{ ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ unsigned int ivsize = crypto_aead_ivsize(aead); ++ struct device *dev = ctx->dev; ++ struct caam_flc *flc; ++ u32 *desc; ++ ++ if (!ctx->cdata.keylen || !ctx->authsize) ++ return 0; ++ ++ flc = &ctx->flc[ENCRYPT]; ++ desc = flc->sh_desc; ++ cnstr_shdsc_chachapoly(desc, &ctx->cdata, &ctx->adata, ivsize, ++ ctx->authsize, true, true); ++ flc->flc[1] = cpu_to_caam32(desc_len(desc)); /* SDL */ ++ dma_sync_single_for_device(dev, ctx->flc_dma[ENCRYPT], ++ sizeof(flc->flc) + desc_bytes(desc), ++ ctx->dir); ++ ++ flc = &ctx->flc[DECRYPT]; ++ desc = flc->sh_desc; ++ cnstr_shdsc_chachapoly(desc, &ctx->cdata, &ctx->adata, ivsize, ++ ctx->authsize, false, true); ++ flc->flc[1] = cpu_to_caam32(desc_len(desc)); /* SDL */ ++ dma_sync_single_for_device(dev, ctx->flc_dma[DECRYPT], ++ sizeof(flc->flc) + desc_bytes(desc), ++ ctx->dir); ++ ++ return 0; ++} ++ ++static int chachapoly_setauthsize(struct crypto_aead *aead, ++ unsigned int authsize) ++{ ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ ++ if (authsize != POLY1305_DIGEST_SIZE) ++ return -EINVAL; ++ ++ ctx->authsize = authsize; ++ return chachapoly_set_sh_desc(aead); ++} ++ ++static int chachapoly_setkey(struct crypto_aead *aead, const u8 *key, ++ unsigned int keylen) ++{ ++ struct caam_ctx *ctx = crypto_aead_ctx(aead); ++ unsigned int ivsize = crypto_aead_ivsize(aead); ++ unsigned int saltlen = CHACHAPOLY_IV_SIZE - ivsize; ++ ++ if (keylen != CHACHA20_KEY_SIZE + saltlen) { ++ crypto_aead_set_flags(aead, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ ++ ctx->cdata.key_virt = key; ++ ctx->cdata.keylen = keylen - saltlen; ++ ++ return chachapoly_set_sh_desc(aead); ++} ++ +static struct tls_edesc *tls_edesc_alloc(struct aead_request *req, + bool encrypt) +{ @@ -5303,7 +6946,9 @@ Signed-off-by: Biwen Li + u32 *desc; + u32 ctx1_iv_off = 0; + const bool ctr_mode = ((ctx->cdata.algtype & OP_ALG_AAI_MASK) == -+ OP_ALG_AAI_CTR_MOD128); ++ OP_ALG_AAI_CTR_MOD128) && ++ ((ctx->cdata.algtype & OP_ALG_ALGSEL_MASK) != ++ OP_ALG_ALGSEL_CHACHA20); + const bool is_rfc3686 = alg->caam.rfc3686; + +#ifdef DEBUG @@ -6119,7 +7764,23 @@ Signed-off-by: Biwen Li + .ivsize = AES_BLOCK_SIZE, + }, + .caam.class1_alg_type = OP_ALG_ALGSEL_AES | OP_ALG_AAI_XTS, -+ } ++ }, ++ { ++ .skcipher = { ++ .base = { ++ .cra_name = "chacha20", ++ .cra_driver_name = "chacha20-caam-qi2", ++ .cra_blocksize = 1, ++ }, ++ .setkey = skcipher_setkey, ++ .encrypt = skcipher_encrypt, ++ .decrypt = skcipher_decrypt, ++ .min_keysize = CHACHA20_KEY_SIZE, ++ .max_keysize = CHACHA20_KEY_SIZE, ++ .ivsize = CHACHA20_IV_SIZE, ++ }, ++ .caam.class1_alg_type = OP_ALG_ALGSEL_CHACHA20, ++ }, +}; + +static struct caam_aead_alg driver_aeads[] = { @@ -7236,6 +8897,50 @@ Signed-off-by: Biwen Li + { + .aead = { + .base = { ++ .cra_name = "rfc7539(chacha20,poly1305)", ++ .cra_driver_name = "rfc7539-chacha20-poly1305-" ++ "caam-qi2", ++ .cra_blocksize = 1, ++ }, ++ .setkey = chachapoly_setkey, ++ .setauthsize = chachapoly_setauthsize, ++ .encrypt = aead_encrypt, ++ .decrypt = aead_decrypt, ++ .ivsize = CHACHAPOLY_IV_SIZE, ++ .maxauthsize = POLY1305_DIGEST_SIZE, ++ }, ++ .caam = { ++ .class1_alg_type = OP_ALG_ALGSEL_CHACHA20 | ++ OP_ALG_AAI_AEAD, ++ .class2_alg_type = OP_ALG_ALGSEL_POLY1305 | ++ OP_ALG_AAI_AEAD, ++ }, ++ }, ++ { ++ .aead = { ++ .base = { ++ .cra_name = "rfc7539esp(chacha20,poly1305)", ++ .cra_driver_name = "rfc7539esp-chacha20-" ++ "poly1305-caam-qi2", ++ .cra_blocksize = 1, ++ }, ++ .setkey = chachapoly_setkey, ++ .setauthsize = chachapoly_setauthsize, ++ .encrypt = aead_encrypt, ++ .decrypt = aead_decrypt, ++ .ivsize = 8, ++ .maxauthsize = POLY1305_DIGEST_SIZE, ++ }, ++ .caam = { ++ .class1_alg_type = OP_ALG_ALGSEL_CHACHA20 | ++ OP_ALG_AAI_AEAD, ++ .class2_alg_type = OP_ALG_ALGSEL_POLY1305 | ++ OP_ALG_AAI_AEAD, ++ }, ++ }, ++ { ++ .aead = { ++ .base = { + .cra_name = "authenc(hmac(sha512)," + "rfc3686(ctr(aes)))", + .cra_driver_name = "authenc-hmac-sha512-" @@ -9040,7 +10745,8 @@ Signed-off-by: Biwen Li + nctx->cb = dpaa2_caam_fqdan_cb; + + /* Register notification callbacks */ -+ err = dpaa2_io_service_register(NULL, nctx); ++ ppriv->dpio = dpaa2_io_service_select(cpu); ++ err = dpaa2_io_service_register(ppriv->dpio, nctx, dev); + if (unlikely(err)) { + dev_dbg(dev, "No affine DPIO for cpu %d\n", cpu); + nctx->cb = NULL; @@ -9058,6 +10764,7 @@ Signed-off-by: Biwen Li + dev); + if (unlikely(!ppriv->store)) { + dev_err(dev, "dpaa2_io_store_create() failed\n"); ++ err = -ENOMEM; + goto err; + } + @@ -9072,7 +10779,7 @@ Signed-off-by: Biwen Li + ppriv = per_cpu_ptr(priv->ppriv, cpu); + if (!ppriv->nctx.cb) + break; -+ dpaa2_io_service_deregister(NULL, &ppriv->nctx); ++ dpaa2_io_service_deregister(ppriv->dpio, &ppriv->nctx, dev); + } + + for_each_online_cpu(cpu) { @@ -9088,11 +10795,12 @@ Signed-off-by: Biwen Li +static void __cold dpaa2_dpseci_dpio_free(struct dpaa2_caam_priv *priv) +{ + struct dpaa2_caam_priv_per_cpu *ppriv; ++ struct device *dev = priv->dev; + int i = 0, cpu; + + for_each_online_cpu(cpu) { + ppriv = per_cpu_ptr(priv->ppriv, cpu); -+ dpaa2_io_service_deregister(NULL, &ppriv->nctx); ++ dpaa2_io_service_deregister(ppriv->dpio, &ppriv->nctx, dev); + dpaa2_io_store_destroy(ppriv->store); + + if (++i == priv->num_pairs) @@ -9190,7 +10898,7 @@ Signed-off-by: Biwen Li + + /* Retry while portal is busy */ + do { -+ err = dpaa2_io_service_pull_fq(NULL, ppriv->rsp_fqid, ++ err = dpaa2_io_service_pull_fq(ppriv->dpio, ppriv->rsp_fqid, + ppriv->store); + } while (err == -EBUSY); + @@ -9258,7 +10966,7 @@ Signed-off-by: Biwen Li + + if (cleaned < budget) { + napi_complete_done(napi, cleaned); -+ err = dpaa2_io_service_rearm(NULL, &ppriv->nctx); ++ err = dpaa2_io_service_rearm(ppriv->dpio, &ppriv->nctx); + if (unlikely(err)) + dev_err(priv->dev, "Notification rearm failed: %d\n", + err); @@ -9399,21 +11107,31 @@ Signed-off-by: Biwen Li + + i = 0; + for_each_online_cpu(cpu) { -+ dev_info(dev, "pair %d: rx queue %d, tx queue %d\n", i, -+ priv->rx_queue_attr[i].fqid, -+ priv->tx_queue_attr[i].fqid); ++ u8 j; ++ ++ j = i % priv->num_pairs; + + ppriv = per_cpu_ptr(priv->ppriv, cpu); -+ ppriv->req_fqid = priv->tx_queue_attr[i].fqid; -+ ppriv->rsp_fqid = priv->rx_queue_attr[i].fqid; -+ ppriv->prio = i; ++ ppriv->req_fqid = priv->tx_queue_attr[j].fqid; ++ ++ /* ++ * Allow all cores to enqueue, while only some of them ++ * will take part in dequeuing. ++ */ ++ if (++i > priv->num_pairs) ++ continue; ++ ++ ppriv->rsp_fqid = priv->rx_queue_attr[j].fqid; ++ ppriv->prio = j; ++ ++ dev_info(dev, "pair %d: rx queue %d, tx queue %d\n", j, ++ priv->rx_queue_attr[j].fqid, ++ priv->tx_queue_attr[j].fqid); + + ppriv->net_dev.dev = *dev; + INIT_LIST_HEAD(&ppriv->net_dev.napi_list); + netif_napi_add(&ppriv->net_dev, &ppriv->napi, dpaa2_dpseci_poll, + DPAA2_CAAM_NAPI_WEIGHT); -+ if (++i == priv->num_pairs) -+ break; + } + + return 0; @@ -9538,12 +11256,13 @@ Signed-off-by: Biwen Li + priv->ppriv = alloc_percpu(*priv->ppriv); + if (!priv->ppriv) { + dev_err(dev, "alloc_percpu() failed\n"); ++ err = -ENOMEM; + goto err_alloc_ppriv; + } + + /* DPSECI initialization */ + err = dpaa2_dpseci_setup(dpseci_dev); -+ if (err < 0) { ++ if (err) { + dev_err(dev, "dpaa2_dpseci_setup() failed\n"); + goto err_dpseci_setup; + } @@ -9551,7 +11270,8 @@ Signed-off-by: Biwen Li + /* DPIO */ + err = dpaa2_dpseci_dpio_setup(priv); + if (err) { -+ dev_err(dev, "dpaa2_dpseci_dpio_setup() failed\n"); ++ if (err != -EPROBE_DEFER) ++ dev_err(dev, "dpaa2_dpseci_dpio_setup() failed\n"); + goto err_dpio_setup; + } + @@ -9585,6 +11305,11 @@ Signed-off-by: Biwen Li + (alg_sel == OP_ALG_ALGSEL_AES)) + continue; + ++ /* Skip CHACHA20 algorithms if not supported by device */ ++ if (alg_sel == OP_ALG_ALGSEL_CHACHA20 && ++ !priv->sec_attr.ccha_acc_num) ++ continue; ++ + t_alg->caam.dev = dev; + caam_skcipher_alg_init(t_alg); + @@ -9617,11 +11342,22 @@ Signed-off-by: Biwen Li + (c1_alg_sel == OP_ALG_ALGSEL_AES)) + continue; + ++ /* Skip CHACHA20 algorithms if not supported by device */ ++ if (c1_alg_sel == OP_ALG_ALGSEL_CHACHA20 && ++ !priv->sec_attr.ccha_acc_num) ++ continue; ++ ++ /* Skip POLY1305 algorithms if not supported by device */ ++ if (c2_alg_sel == OP_ALG_ALGSEL_POLY1305 && ++ !priv->sec_attr.ptha_acc_num) ++ continue; ++ + /* + * Skip algorithms requiring message digests + * if MD not supported by device. + */ -+ if (!priv->sec_attr.md_acc_num && c2_alg_sel) ++ if ((c2_alg_sel & ~OP_ALG_ALGSEL_SUBMASK) == 0x40 && ++ !priv->sec_attr.md_acc_num) + continue; + + t_alg->caam.dev = dev; @@ -9761,7 +11497,8 @@ Signed-off-by: Biwen Li +{ + struct dpaa2_fd fd; + struct dpaa2_caam_priv *priv = dev_get_drvdata(dev); -+ int err = 0, i, id; ++ struct dpaa2_caam_priv_per_cpu *ppriv; ++ int err = 0, i; + + if (IS_ERR(req)) + return PTR_ERR(req); @@ -9791,23 +11528,18 @@ Signed-off-by: Biwen Li + dpaa2_fd_set_len(&fd, dpaa2_fl_get_len(&req->fd_flt[1])); + dpaa2_fd_set_flc(&fd, req->flc_dma); + -+ /* -+ * There is no guarantee that preemption is disabled here, -+ * thus take action. -+ */ -+ preempt_disable(); -+ id = smp_processor_id() % priv->dpseci_attr.num_tx_queues; ++ ppriv = this_cpu_ptr(priv->ppriv); + for (i = 0; i < (priv->dpseci_attr.num_tx_queues << 1); i++) { -+ err = dpaa2_io_service_enqueue_fq(NULL, -+ priv->tx_queue_attr[id].fqid, ++ err = dpaa2_io_service_enqueue_fq(ppriv->dpio, ppriv->req_fqid, + &fd); + if (err != -EBUSY) + break; ++ ++ cpu_relax(); + } -+ preempt_enable(); + -+ if (unlikely(err < 0)) { -+ dev_err(dev, "Error enqueuing frame: %d\n", err); ++ if (unlikely(err)) { ++ dev_err_ratelimited(dev, "Error enqueuing frame: %d\n", err); + goto err_out; + } + @@ -9845,7 +11577,7 @@ Signed-off-by: Biwen Li +module_fsl_mc_driver(dpaa2_caam_driver); --- /dev/null +++ b/drivers/crypto/caam/caamalg_qi2.h -@@ -0,0 +1,274 @@ +@@ -0,0 +1,276 @@ +/* + * Copyright 2015-2016 Freescale Semiconductor Inc. + * Copyright 2017 NXP @@ -9953,6 +11685,7 @@ Signed-off-by: Biwen Li + * @nctx: notification context of response FQ + * @store: where dequeued frames are stored + * @priv: backpointer to dpaa2_caam_priv ++ * @dpio: portal used for data path operations + */ +struct dpaa2_caam_priv_per_cpu { + struct napi_struct napi; @@ -9963,6 +11696,7 @@ Signed-off-by: Biwen Li + struct dpaa2_io_notification_ctx nctx; + struct dpaa2_io_store *store; + struct dpaa2_caam_priv *priv; ++ struct dpaa2_io *dpio; +}; + +/* @@ -10122,7 +11856,15 @@ Signed-off-by: Biwen Li +#endif /* _CAAMALG_QI2_H_ */ --- a/drivers/crypto/caam/caamhash.c +++ b/drivers/crypto/caam/caamhash.c -@@ -62,6 +62,7 @@ +@@ -2,6 +2,7 @@ + * caam - Freescale FSL CAAM support for ahash functions of crypto API + * + * Copyright 2011 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + * + * Based on caamalg.c crypto API driver. + * +@@ -62,6 +63,7 @@ #include "error.h" #include "sg_sw_sec4.h" #include "key_gen.h" @@ -10130,7 +11872,7 @@ Signed-off-by: Biwen Li #define CAAM_CRA_PRIORITY 3000 -@@ -71,14 +72,6 @@ +@@ -71,14 +73,6 @@ #define CAAM_MAX_HASH_BLOCK_SIZE SHA512_BLOCK_SIZE #define CAAM_MAX_HASH_DIGEST_SIZE SHA512_DIGEST_SIZE @@ -10145,7 +11887,7 @@ Signed-off-by: Biwen Li #define DESC_HASH_MAX_USED_BYTES (DESC_AHASH_FINAL_LEN + \ CAAM_MAX_HASH_KEY_SIZE) #define DESC_HASH_MAX_USED_LEN (DESC_HASH_MAX_USED_BYTES / CAAM_CMD_SZ) -@@ -107,6 +100,7 @@ struct caam_hash_ctx { +@@ -107,6 +101,7 @@ struct caam_hash_ctx { dma_addr_t sh_desc_update_first_dma; dma_addr_t sh_desc_fin_dma; dma_addr_t sh_desc_digest_dma; @@ -10153,7 +11895,7 @@ Signed-off-by: Biwen Li struct device *jrdev; u8 key[CAAM_MAX_HASH_KEY_SIZE]; int ctx_len; -@@ -218,7 +212,7 @@ static inline int buf_map_to_sec4_sg(str +@@ -218,7 +213,7 @@ static inline int buf_map_to_sec4_sg(str } /* Map state->caam_ctx, and add it to link table */ @@ -10162,7 +11904,7 @@ Signed-off-by: Biwen Li struct caam_hash_state *state, int ctx_len, struct sec4_sg_entry *sec4_sg, u32 flag) { -@@ -234,68 +228,22 @@ static inline int ctx_map_to_sec4_sg(u32 +@@ -234,68 +229,22 @@ static inline int ctx_map_to_sec4_sg(u32 return 0; } @@ -10237,7 +11979,7 @@ Signed-off-by: Biwen Li #ifdef DEBUG print_hex_dump(KERN_ERR, "ahash update shdesc@"__stringify(__LINE__)": ", -@@ -304,9 +252,10 @@ static int ahash_set_sh_desc(struct cryp +@@ -304,9 +253,10 @@ static int ahash_set_sh_desc(struct cryp /* ahash_update_first shared descriptor */ desc = ctx->sh_desc_update_first; @@ -10250,7 +11992,7 @@ Signed-off-by: Biwen Li #ifdef DEBUG print_hex_dump(KERN_ERR, "ahash update first shdesc@"__stringify(__LINE__)": ", -@@ -315,9 +264,10 @@ static int ahash_set_sh_desc(struct cryp +@@ -315,9 +265,10 @@ static int ahash_set_sh_desc(struct cryp /* ahash_final shared descriptor */ desc = ctx->sh_desc_fin; @@ -10263,7 +12005,7 @@ Signed-off-by: Biwen Li #ifdef DEBUG print_hex_dump(KERN_ERR, "ahash final shdesc@"__stringify(__LINE__)": ", DUMP_PREFIX_ADDRESS, 16, 4, desc, -@@ -326,9 +276,10 @@ static int ahash_set_sh_desc(struct cryp +@@ -326,9 +277,10 @@ static int ahash_set_sh_desc(struct cryp /* ahash_digest shared descriptor */ desc = ctx->sh_desc_digest; @@ -10276,7 +12018,7 @@ Signed-off-by: Biwen Li #ifdef DEBUG print_hex_dump(KERN_ERR, "ahash digest shdesc@"__stringify(__LINE__)": ", -@@ -421,6 +372,7 @@ static int ahash_setkey(struct crypto_ah +@@ -421,6 +373,7 @@ static int ahash_setkey(struct crypto_ah struct caam_hash_ctx *ctx = crypto_ahash_ctx(ahash); int blocksize = crypto_tfm_alg_blocksize(&ahash->base); int digestsize = crypto_ahash_digestsize(ahash); @@ -10284,7 +12026,7 @@ Signed-off-by: Biwen Li int ret; u8 *hashed_key = NULL; -@@ -441,16 +393,26 @@ static int ahash_setkey(struct crypto_ah +@@ -441,16 +394,26 @@ static int ahash_setkey(struct crypto_ah key = hashed_key; } @@ -10320,7 +12062,7 @@ Signed-off-by: Biwen Li kfree(hashed_key); return ahash_set_sh_desc(ahash); -@@ -773,7 +735,7 @@ static int ahash_update_ctx(struct ahash +@@ -773,7 +736,7 @@ static int ahash_update_ctx(struct ahash edesc->src_nents = src_nents; edesc->sec4_sg_bytes = sec4_sg_bytes; @@ -10329,7 +12071,7 @@ Signed-off-by: Biwen Li edesc->sec4_sg, DMA_BIDIRECTIONAL); if (ret) goto unmap_ctx; -@@ -871,9 +833,8 @@ static int ahash_final_ctx(struct ahash_ +@@ -871,9 +834,8 @@ static int ahash_final_ctx(struct ahash_ desc = edesc->hw_desc; edesc->sec4_sg_bytes = sec4_sg_bytes; @@ -10340,7 +12082,7 @@ Signed-off-by: Biwen Li edesc->sec4_sg, DMA_TO_DEVICE); if (ret) goto unmap_ctx; -@@ -967,7 +928,7 @@ static int ahash_finup_ctx(struct ahash_ +@@ -967,7 +929,7 @@ static int ahash_finup_ctx(struct ahash_ edesc->src_nents = src_nents; @@ -10349,7 +12091,7 @@ Signed-off-by: Biwen Li edesc->sec4_sg, DMA_TO_DEVICE); if (ret) goto unmap_ctx; -@@ -1126,7 +1087,6 @@ static int ahash_final_no_ctx(struct aha +@@ -1126,7 +1088,6 @@ static int ahash_final_no_ctx(struct aha dev_err(jrdev, "unable to map dst\n"); goto unmap; } @@ -10357,7 +12099,7 @@ Signed-off-by: Biwen Li #ifdef DEBUG print_hex_dump(KERN_ERR, "jobdesc@"__stringify(__LINE__)": ", -@@ -1208,7 +1168,6 @@ static int ahash_update_no_ctx(struct ah +@@ -1208,7 +1169,6 @@ static int ahash_update_no_ctx(struct ah edesc->src_nents = src_nents; edesc->sec4_sg_bytes = sec4_sg_bytes; @@ -10365,7 +12107,7 @@ Signed-off-by: Biwen Li ret = buf_map_to_sec4_sg(jrdev, edesc->sec4_sg, state); if (ret) -@@ -1420,7 +1379,6 @@ static int ahash_update_first(struct aha +@@ -1420,7 +1380,6 @@ static int ahash_update_first(struct aha } edesc->src_nents = src_nents; @@ -10373,7 +12115,7 @@ Signed-off-by: Biwen Li ret = ahash_edesc_add_src(ctx, edesc, req, mapped_nents, 0, 0, to_hash); -@@ -1722,6 +1680,7 @@ static int caam_hash_cra_init(struct cry +@@ -1722,6 +1681,7 @@ static int caam_hash_cra_init(struct cry HASH_MSG_LEN + 64, HASH_MSG_LEN + SHA512_DIGEST_SIZE }; dma_addr_t dma_addr; @@ -10381,7 +12123,7 @@ Signed-off-by: Biwen Li /* * Get a Job ring from Job Ring driver to ensure in-order -@@ -1733,10 +1692,13 @@ static int caam_hash_cra_init(struct cry +@@ -1733,10 +1693,13 @@ static int caam_hash_cra_init(struct cry return PTR_ERR(ctx->jrdev); } @@ -10396,7 +12138,7 @@ Signed-off-by: Biwen Li if (dma_mapping_error(ctx->jrdev, dma_addr)) { dev_err(ctx->jrdev, "unable to map shared descriptors\n"); caam_jr_free(ctx->jrdev); -@@ -1771,7 +1733,7 @@ static void caam_hash_cra_exit(struct cr +@@ -1771,11 +1734,11 @@ static void caam_hash_cra_exit(struct cr dma_unmap_single_attrs(ctx->jrdev, ctx->sh_desc_update_dma, offsetof(struct caam_hash_ctx, sh_desc_update_dma), @@ -10405,6 +12147,95 @@ Signed-off-by: Biwen Li caam_jr_free(ctx->jrdev); } +-static void __exit caam_algapi_hash_exit(void) ++void caam_algapi_hash_exit(void) + { + struct caam_hash_alg *t_alg, *n; + +@@ -1834,56 +1797,38 @@ caam_hash_alloc(struct caam_hash_templat + return t_alg; + } + +-static int __init caam_algapi_hash_init(void) ++int caam_algapi_hash_init(struct device *ctrldev) + { +- struct device_node *dev_node; +- struct platform_device *pdev; +- struct device *ctrldev; + int i = 0, err = 0; +- struct caam_drv_private *priv; ++ struct caam_drv_private *priv = dev_get_drvdata(ctrldev); + unsigned int md_limit = SHA512_DIGEST_SIZE; +- u32 cha_inst, cha_vid; +- +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); +- if (!dev_node) { +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); +- if (!dev_node) +- return -ENODEV; +- } +- +- pdev = of_find_device_by_node(dev_node); +- if (!pdev) { +- of_node_put(dev_node); +- return -ENODEV; +- } +- +- ctrldev = &pdev->dev; +- priv = dev_get_drvdata(ctrldev); +- of_node_put(dev_node); +- +- /* +- * If priv is NULL, it's probably because the caam driver wasn't +- * properly initialized (e.g. RNG4 init failed). Thus, bail out here. +- */ +- if (!priv) +- return -ENODEV; ++ u32 md_inst, md_vid; + + /* + * Register crypto algorithms the device supports. First, identify + * presence and attributes of MD block. + */ +- cha_vid = rd_reg32(&priv->ctrl->perfmon.cha_id_ls); +- cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls); ++ if (priv->era < 10) { ++ md_vid = (rd_reg32(&priv->ctrl->perfmon.cha_id_ls) & ++ CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ md_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) & ++ CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT; ++ } else { ++ u32 mdha = rd_reg32(&priv->ctrl->vreg.mdha); ++ ++ md_vid = (mdha & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT; ++ md_inst = mdha & CHA_VER_NUM_MASK; ++ } + + /* + * Skip registration of any hashing algorithms if MD block + * is not present. + */ +- if (!((cha_inst & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT)) ++ if (!md_inst) + return -ENODEV; + + /* Limit digest size based on LP256 */ +- if ((cha_vid & CHA_ID_LS_MD_MASK) == CHA_ID_LS_MD_LP256) ++ if (md_vid == CHA_VER_VID_MD_LP256) + md_limit = SHA256_DIGEST_SIZE; + + INIT_LIST_HEAD(&hash_list); +@@ -1934,10 +1879,3 @@ static int __init caam_algapi_hash_init( + + return err; + } +- +-module_init(caam_algapi_hash_init); +-module_exit(caam_algapi_hash_exit); +- +-MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("FSL CAAM support for ahash functions of crypto API"); +-MODULE_AUTHOR("Freescale Semiconductor - NMG"); --- /dev/null +++ b/drivers/crypto/caam/caamhash_desc.c @@ -0,0 +1,108 @@ @@ -10567,7 +12398,172 @@ Signed-off-by: Biwen Li +void cnstr_shdsc_ahash(u32 * const desc, struct alginfo *adata, u32 state, + int digestsize, int ctx_len, bool import_ctx, int era); + -+#endif /* _CAAMHASH_DESC_H_ */ ++#endif /* _CAAMHASH_DESC_H_ */ +--- a/drivers/crypto/caam/caampkc.c ++++ b/drivers/crypto/caam/caampkc.c +@@ -2,6 +2,7 @@ + * caam - Freescale FSL CAAM support for Public Key Cryptography + * + * Copyright 2016 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + * + * There is no Shared Descriptor for PKC so that the Job Descriptor must carry + * all the desired key parameters, input and output pointers. +@@ -1017,46 +1018,22 @@ static struct akcipher_alg caam_rsa = { + }; + + /* Public Key Cryptography module initialization handler */ +-static int __init caam_pkc_init(void) ++int caam_pkc_init(struct device *ctrldev) + { +- struct device_node *dev_node; +- struct platform_device *pdev; +- struct device *ctrldev; +- struct caam_drv_private *priv; +- u32 cha_inst, pk_inst; ++ struct caam_drv_private *priv = dev_get_drvdata(ctrldev); ++ u32 pk_inst; + int err; + +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); +- if (!dev_node) { +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); +- if (!dev_node) +- return -ENODEV; +- } +- +- pdev = of_find_device_by_node(dev_node); +- if (!pdev) { +- of_node_put(dev_node); +- return -ENODEV; +- } +- +- ctrldev = &pdev->dev; +- priv = dev_get_drvdata(ctrldev); +- of_node_put(dev_node); +- +- /* +- * If priv is NULL, it's probably because the caam driver wasn't +- * properly initialized (e.g. RNG4 init failed). Thus, bail out here. +- */ +- if (!priv) +- return -ENODEV; +- + /* Determine public key hardware accelerator presence. */ +- cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls); +- pk_inst = (cha_inst & CHA_ID_LS_PK_MASK) >> CHA_ID_LS_PK_SHIFT; ++ if (priv->era < 10) ++ pk_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) & ++ CHA_ID_LS_PK_MASK) >> CHA_ID_LS_PK_SHIFT; ++ else ++ pk_inst = rd_reg32(&priv->ctrl->vreg.pkha) & CHA_VER_NUM_MASK; + + /* Do not register algorithms if PKHA is not present. */ + if (!pk_inst) +- return -ENODEV; ++ return 0; + + err = crypto_register_akcipher(&caam_rsa); + if (err) +@@ -1068,14 +1045,7 @@ static int __init caam_pkc_init(void) + return err; + } + +-static void __exit caam_pkc_exit(void) ++void caam_pkc_exit(void) + { + crypto_unregister_akcipher(&caam_rsa); + } +- +-module_init(caam_pkc_init); +-module_exit(caam_pkc_exit); +- +-MODULE_LICENSE("Dual BSD/GPL"); +-MODULE_DESCRIPTION("FSL CAAM support for PKC functions of crypto API"); +-MODULE_AUTHOR("Freescale Semiconductor"); +--- a/drivers/crypto/caam/caamrng.c ++++ b/drivers/crypto/caam/caamrng.c +@@ -2,6 +2,7 @@ + * caam - Freescale FSL CAAM support for hw_random + * + * Copyright 2011 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + * + * Based on caamalg.c crypto API driver. + * +@@ -294,49 +295,29 @@ static struct hwrng caam_rng = { + .read = caam_read, + }; + +-static void __exit caam_rng_exit(void) ++void caam_rng_exit(void) + { + caam_jr_free(rng_ctx->jrdev); + hwrng_unregister(&caam_rng); + kfree(rng_ctx); + } + +-static int __init caam_rng_init(void) ++int caam_rng_init(struct device *ctrldev) + { + struct device *dev; +- struct device_node *dev_node; +- struct platform_device *pdev; +- struct device *ctrldev; +- struct caam_drv_private *priv; ++ u32 rng_inst; ++ struct caam_drv_private *priv = dev_get_drvdata(ctrldev); + int err; + +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); +- if (!dev_node) { +- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0"); +- if (!dev_node) +- return -ENODEV; +- } +- +- pdev = of_find_device_by_node(dev_node); +- if (!pdev) { +- of_node_put(dev_node); +- return -ENODEV; +- } +- +- ctrldev = &pdev->dev; +- priv = dev_get_drvdata(ctrldev); +- of_node_put(dev_node); +- +- /* +- * If priv is NULL, it's probably because the caam driver wasn't +- * properly initialized (e.g. RNG4 init failed). Thus, bail out here. +- */ +- if (!priv) +- return -ENODEV; +- + /* Check for an instantiated RNG before registration */ +- if (!(rd_reg32(&priv->ctrl->perfmon.cha_num_ls) & CHA_ID_LS_RNG_MASK)) +- return -ENODEV; ++ if (priv->era < 10) ++ rng_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) & ++ CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT; ++ else ++ rng_inst = rd_reg32(&priv->ctrl->vreg.rng) & CHA_VER_NUM_MASK; ++ ++ if (!rng_inst) ++ return 0; + + dev = caam_jr_alloc(); + if (IS_ERR(dev)) { +@@ -361,10 +342,3 @@ free_caam_alloc: + caam_jr_free(dev); + return err; + } +- +-module_init(caam_rng_init); +-module_exit(caam_rng_exit); +- +-MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("FSL CAAM support for hw_random API"); +-MODULE_AUTHOR("Freescale Semiconductor - NMG"); --- a/drivers/crypto/caam/compat.h +++ b/drivers/crypto/caam/compat.h @@ -17,6 +17,7 @@ @@ -10578,7 +12574,13 @@ Signed-off-by: Biwen Li #include #include #include -@@ -38,6 +39,7 @@ +@@ -34,10 +35,13 @@ + #include + #include + #include ++#include ++#include + #include #include #include #include @@ -10588,7 +12590,26 @@ Signed-off-by: Biwen Li #include --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c -@@ -27,6 +27,8 @@ EXPORT_SYMBOL(caam_imx); +@@ -2,6 +2,7 @@ + * Controller-level driver, kernel property detection, initialization + * + * Copyright 2008-2012 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + */ + + #include +@@ -16,17 +17,15 @@ + #include "desc_constr.h" + #include "ctrl.h" + +-bool caam_little_end; +-EXPORT_SYMBOL(caam_little_end); + bool caam_dpaa2; + EXPORT_SYMBOL(caam_dpaa2); +-bool caam_imx; +-EXPORT_SYMBOL(caam_imx); + + #ifdef CONFIG_CAAM_QI #include "qi.h" #endif @@ -10597,7 +12618,61 @@ Signed-off-by: Biwen Li /* * i.MX targets tend to have clock control subsystems that can * enable/disable clocking to our device. -@@ -332,6 +334,9 @@ static int caam_remove(struct platform_d +@@ -105,7 +104,7 @@ static inline int run_descriptor_deco0(s + struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl; + struct caam_deco __iomem *deco = ctrlpriv->deco; + unsigned int timeout = 100000; +- u32 deco_dbg_reg, flags; ++ u32 deco_dbg_reg, deco_state, flags; + int i; + + +@@ -148,13 +147,22 @@ static inline int run_descriptor_deco0(s + timeout = 10000000; + do { + deco_dbg_reg = rd_reg32(&deco->desc_dbg); ++ ++ if (ctrlpriv->era < 10) ++ deco_state = (deco_dbg_reg & DESC_DBG_DECO_STAT_MASK) >> ++ DESC_DBG_DECO_STAT_SHIFT; ++ else ++ deco_state = (rd_reg32(&deco->dbg_exec) & ++ DESC_DER_DECO_STAT_MASK) >> ++ DESC_DER_DECO_STAT_SHIFT; ++ + /* + * If an error occured in the descriptor, then + * the DECO status field will be set to 0x0D + */ +- if ((deco_dbg_reg & DESC_DBG_DECO_STAT_MASK) == +- DESC_DBG_DECO_STAT_HOST_ERR) ++ if (deco_state == DECO_STAT_HOST_ERR) + break; ++ + cpu_relax(); + } while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout); + +@@ -316,15 +324,15 @@ static int caam_remove(struct platform_d + of_platform_depopulate(ctrldev); + + #ifdef CONFIG_CAAM_QI +- if (ctrlpriv->qidev) +- caam_qi_shutdown(ctrlpriv->qidev); ++ if (ctrlpriv->qi_init) ++ caam_qi_shutdown(ctrldev); + #endif + + /* + * De-initialize RNG state handles initialized by this driver. +- * In case of DPAA 2.x, RNG is managed by MC firmware. ++ * In case of SoCs with Management Complex, RNG is managed by MC f/w. + */ +- if (!caam_dpaa2 && ctrlpriv->rng4_sh_init) ++ if (!ctrlpriv->mc_en && ctrlpriv->rng4_sh_init) + deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init); + + /* Shut down debug views */ +@@ -332,6 +340,9 @@ static int caam_remove(struct platform_d debugfs_remove_recursive(ctrlpriv->dfs_root); #endif @@ -10607,7 +12682,7 @@ Signed-off-by: Biwen Li /* Unmap controller region */ iounmap(ctrl); -@@ -433,6 +438,10 @@ static int caam_probe(struct platform_de +@@ -433,6 +444,10 @@ static int caam_probe(struct platform_de {.family = "Freescale i.MX"}, {}, }; @@ -10618,19 +12693,223 @@ Signed-off-by: Biwen Li struct device *dev; struct device_node *nprop, *np; struct caam_ctrl __iomem *ctrl; -@@ -615,6 +624,8 @@ static int caam_probe(struct platform_de - goto iounmap_ctrl; +@@ -442,7 +457,7 @@ static int caam_probe(struct platform_de + struct caam_perfmon *perfmon; + #endif + u32 scfgr, comp_params; +- u32 cha_vid_ls; ++ u8 rng_vid; + int pg_size; + int BLOCK_OFFSET = 0; + +@@ -454,15 +469,54 @@ static int caam_probe(struct platform_de + dev_set_drvdata(dev, ctrlpriv); + nprop = pdev->dev.of_node; + ++ /* Get configuration properties from device tree */ ++ /* First, get register page */ ++ ctrl = of_iomap(nprop, 0); ++ if (!ctrl) { ++ dev_err(dev, "caam: of_iomap() failed\n"); ++ return -ENOMEM; ++ } ++ ++ caam_little_end = !(bool)(rd_reg32(&ctrl->perfmon.status) & ++ (CSTA_PLEND | CSTA_ALT_PLEND)); + caam_imx = (bool)soc_device_match(imx_soc); + ++ comp_params = rd_reg32(&ctrl->perfmon.comp_parms_ms); ++ caam_dpaa2 = !!(comp_params & CTPR_MS_DPAA2); ++ ctrlpriv->qi_present = !!(comp_params & CTPR_MS_QI_MASK); ++ ++#ifdef CONFIG_CAAM_QI ++ /* If (DPAA 1.x) QI present, check whether dependencies are available */ ++ if (ctrlpriv->qi_present && !caam_dpaa2) { ++ ret = qman_is_probed(); ++ if (!ret) { ++ ret = -EPROBE_DEFER; ++ goto iounmap_ctrl; ++ } else if (ret < 0) { ++ dev_err(dev, "failing probe due to qman probe error\n"); ++ ret = -ENODEV; ++ goto iounmap_ctrl; ++ } ++ ++ ret = qman_portals_probed(); ++ if (!ret) { ++ ret = -EPROBE_DEFER; ++ goto iounmap_ctrl; ++ } else if (ret < 0) { ++ dev_err(dev, "failing probe due to qman portals probe error\n"); ++ ret = -ENODEV; ++ goto iounmap_ctrl; ++ } ++ } ++#endif ++ + /* Enable clocking */ + clk = caam_drv_identify_clk(&pdev->dev, "ipg"); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + dev_err(&pdev->dev, + "can't identify CAAM ipg clk: %d\n", ret); +- return ret; ++ goto iounmap_ctrl; + } + ctrlpriv->caam_ipg = clk; + +@@ -471,7 +525,7 @@ static int caam_probe(struct platform_de + ret = PTR_ERR(clk); + dev_err(&pdev->dev, + "can't identify CAAM mem clk: %d\n", ret); +- return ret; ++ goto iounmap_ctrl; + } + ctrlpriv->caam_mem = clk; + +@@ -480,7 +534,7 @@ static int caam_probe(struct platform_de + ret = PTR_ERR(clk); + dev_err(&pdev->dev, + "can't identify CAAM aclk clk: %d\n", ret); +- return ret; ++ goto iounmap_ctrl; + } + ctrlpriv->caam_aclk = clk; + +@@ -490,7 +544,7 @@ static int caam_probe(struct platform_de + ret = PTR_ERR(clk); + dev_err(&pdev->dev, + "can't identify CAAM emi_slow clk: %d\n", ret); +- return ret; ++ goto iounmap_ctrl; + } + ctrlpriv->caam_emi_slow = clk; + } +@@ -498,7 +552,7 @@ static int caam_probe(struct platform_de + ret = clk_prepare_enable(ctrlpriv->caam_ipg); + if (ret < 0) { + dev_err(&pdev->dev, "can't enable CAAM ipg clock: %d\n", ret); +- return ret; ++ goto iounmap_ctrl; + } + + ret = clk_prepare_enable(ctrlpriv->caam_mem); +@@ -523,25 +577,10 @@ static int caam_probe(struct platform_de + } + } + +- /* Get configuration properties from device tree */ +- /* First, get register page */ +- ctrl = of_iomap(nprop, 0); +- if (ctrl == NULL) { +- dev_err(dev, "caam: of_iomap() failed\n"); +- ret = -ENOMEM; +- goto disable_caam_emi_slow; +- } +- +- caam_little_end = !(bool)(rd_reg32(&ctrl->perfmon.status) & +- (CSTA_PLEND | CSTA_ALT_PLEND)); +- +- /* Finding the page size for using the CTPR_MS register */ +- comp_params = rd_reg32(&ctrl->perfmon.comp_parms_ms); +- pg_size = (comp_params & CTPR_MS_PG_SZ_MASK) >> CTPR_MS_PG_SZ_SHIFT; +- + /* Allocating the BLOCK_OFFSET based on the supported page size on + * the platform + */ ++ pg_size = (comp_params & CTPR_MS_PG_SZ_MASK) >> CTPR_MS_PG_SZ_SHIFT; + if (pg_size == 0) + BLOCK_OFFSET = PG_SIZE_4K; + else +@@ -563,11 +602,14 @@ static int caam_probe(struct platform_de + /* + * Enable DECO watchdogs and, if this is a PHYS_ADDR_T_64BIT kernel, + * long pointers in master configuration register. +- * In case of DPAA 2.x, Management Complex firmware performs ++ * In case of SoCs with Management Complex, MC f/w performs + * the configuration. + */ +- caam_dpaa2 = !!(comp_params & CTPR_MS_DPAA2); +- if (!caam_dpaa2) ++ np = of_find_compatible_node(NULL, NULL, "fsl,qoriq-mc"); ++ ctrlpriv->mc_en = !!np; ++ of_node_put(np); ++ ++ if (!ctrlpriv->mc_en) + clrsetbits_32(&ctrl->mcr, MCFGR_AWCACHE_MASK | MCFGR_LONG_PTR, + MCFGR_AWCACHE_CACH | MCFGR_AWCACHE_BUFF | + MCFGR_WDENABLE | MCFGR_LARGE_BURST | +@@ -612,14 +654,11 @@ static int caam_probe(struct platform_de + } + if (ret) { + dev_err(dev, "dma_set_mask_and_coherent failed (%d)\n", ret); +- goto iounmap_ctrl; ++ goto disable_caam_emi_slow; } +- ret = of_platform_populate(nprop, caam_match, NULL, dev); +- if (ret) { +- dev_err(dev, "JR platform devices creation error\n"); +- goto iounmap_ctrl; +- } + ctrlpriv->era = caam_get_era(); ++ ctrlpriv->domain = iommu_get_domain_for_dev(dev); + + #ifdef CONFIG_DEBUG_FS + /* +@@ -633,21 +672,7 @@ static int caam_probe(struct platform_de + ctrlpriv->ctl = debugfs_create_dir("ctl", ctrlpriv->dfs_root); + #endif + +- ring = 0; +- for_each_available_child_of_node(nprop, np) +- if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") || +- of_device_is_compatible(np, "fsl,sec4.0-job-ring")) { +- ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *) +- ((__force uint8_t *)ctrl + +- (ring + JR_BLOCK_NUMBER) * +- BLOCK_OFFSET +- ); +- ctrlpriv->total_jobrs++; +- ring++; +- } +- + /* Check to see if (DPAA 1.x) QI present. If so, enable */ +- ctrlpriv->qi_present = !!(comp_params & CTPR_MS_QI_MASK); + if (ctrlpriv->qi_present && !caam_dpaa2) { + ctrlpriv->qi = (struct caam_queue_if __iomem __force *) + ((__force uint8_t *)ctrl + +@@ -664,6 +689,25 @@ static int caam_probe(struct platform_de + #endif + } + ++ ret = of_platform_populate(nprop, caam_match, NULL, dev); ++ if (ret) { ++ dev_err(dev, "JR platform devices creation error\n"); ++ goto shutdown_qi; ++ } ++ ++ ring = 0; ++ for_each_available_child_of_node(nprop, np) ++ if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") || ++ of_device_is_compatible(np, "fsl,sec4.0-job-ring")) { ++ ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *) ++ ((__force uint8_t *)ctrl + ++ (ring + JR_BLOCK_NUMBER) * ++ BLOCK_OFFSET ++ ); ++ ctrlpriv->total_jobrs++; ++ ring++; ++ } + - ret = of_platform_populate(nprop, caam_match, NULL, dev); - if (ret) { - dev_err(dev, "JR platform devices creation error\n"); -@@ -671,6 +682,16 @@ static int caam_probe(struct platform_de + /* If no QI and no rings specified, quit and go home */ + if ((!ctrlpriv->qi_present) && (!ctrlpriv->total_jobrs)) { + dev_err(dev, "no queues configured, terminating\n"); +@@ -671,15 +715,29 @@ static int caam_probe(struct platform_de goto caam_remove; } +- cha_vid_ls = rd_reg32(&ctrl->perfmon.cha_id_ls); + caam_dma_pdev_info.parent = dev; + caam_dma_pdev_info.dma_mask = dma_get_mask(dev); + caam_dma_dev = platform_device_register_full(&caam_dma_pdev_info); @@ -10641,21 +12920,73 @@ Signed-off-by: Biwen Li + set_dma_ops(&caam_dma_dev->dev, get_dma_ops(dev)); + } + - cha_vid_ls = rd_reg32(&ctrl->perfmon.cha_id_ls); ++ if (ctrlpriv->era < 10) ++ rng_vid = (rd_reg32(&ctrl->perfmon.cha_id_ls) & ++ CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT; ++ else ++ rng_vid = (rd_reg32(&ctrl->vreg.rng) & CHA_VER_VID_MASK) >> ++ CHA_VER_VID_SHIFT; /* -@@ -746,7 +767,7 @@ static int caam_probe(struct platform_de + * If SEC has RNG version >= 4 and RNG state handle has not been + * already instantiated, do RNG instantiation +- * In case of DPAA 2.x, RNG is managed by MC firmware. ++ * In case of SoCs with Management Complex, RNG is managed by MC f/w. + */ +- if (!caam_dpaa2 && +- (cha_vid_ls & CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT >= 4) { ++ if (!ctrlpriv->mc_en && rng_vid >= 4) { + ctrlpriv->rng4_sh_init = + rd_reg32(&ctrl->r4tst[0].rdsta); + /* +@@ -746,10 +804,9 @@ static int caam_probe(struct platform_de /* Report "alive" for developer to see */ dev_info(dev, "device ID = 0x%016llx (Era %d)\n", caam_id, - caam_get_era()); +- dev_info(dev, "job rings = %d, qi = %d, dpaa2 = %s\n", +- ctrlpriv->total_jobrs, ctrlpriv->qi_present, +- caam_dpaa2 ? "yes" : "no"); + ctrlpriv->era); - dev_info(dev, "job rings = %d, qi = %d, dpaa2 = %s\n", - ctrlpriv->total_jobrs, ctrlpriv->qi_present, - caam_dpaa2 ? "yes" : "no"); ++ dev_info(dev, "job rings = %d, qi = %d\n", ++ ctrlpriv->total_jobrs, ctrlpriv->qi_present); + + #ifdef CONFIG_DEBUG_FS + debugfs_create_file("rq_dequeued", S_IRUSR | S_IRGRP | S_IROTH, +@@ -816,8 +873,11 @@ caam_remove: + caam_remove(pdev); + return ret; + +-iounmap_ctrl: +- iounmap(ctrl); ++shutdown_qi: ++#ifdef CONFIG_CAAM_QI ++ if (ctrlpriv->qi_init) ++ caam_qi_shutdown(dev); ++#endif + disable_caam_emi_slow: + if (ctrlpriv->caam_emi_slow) + clk_disable_unprepare(ctrlpriv->caam_emi_slow); +@@ -827,6 +887,8 @@ disable_caam_mem: + clk_disable_unprepare(ctrlpriv->caam_mem); + disable_caam_ipg: + clk_disable_unprepare(ctrlpriv->caam_ipg); ++iounmap_ctrl: ++ iounmap(ctrl); + return ret; + } + --- a/drivers/crypto/caam/desc.h +++ b/drivers/crypto/caam/desc.h -@@ -42,6 +42,7 @@ +@@ -4,6 +4,7 @@ + * Definitions to support CAAM descriptor instruction generation + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + */ + + #ifndef DESC_H +@@ -42,6 +43,7 @@ #define CMD_SEQ_LOAD (0x03 << CMD_SHIFT) #define CMD_FIFO_LOAD (0x04 << CMD_SHIFT) #define CMD_SEQ_FIFO_LOAD (0x05 << CMD_SHIFT) @@ -10663,7 +12994,28 @@ Signed-off-by: Biwen Li #define CMD_STORE (0x0a << CMD_SHIFT) #define CMD_SEQ_STORE (0x0b << CMD_SHIFT) #define CMD_FIFO_STORE (0x0c << CMD_SHIFT) -@@ -355,6 +356,7 @@ +@@ -242,6 +244,7 @@ + #define LDST_SRCDST_WORD_DESCBUF_SHARED (0x42 << LDST_SRCDST_SHIFT) + #define LDST_SRCDST_WORD_DESCBUF_JOB_WE (0x45 << LDST_SRCDST_SHIFT) + #define LDST_SRCDST_WORD_DESCBUF_SHARED_WE (0x46 << LDST_SRCDST_SHIFT) ++#define LDST_SRCDST_WORD_INFO_FIFO_SM (0x71 << LDST_SRCDST_SHIFT) + #define LDST_SRCDST_WORD_INFO_FIFO (0x7a << LDST_SRCDST_SHIFT) + + /* Offset in source/destination */ +@@ -284,6 +287,12 @@ + #define LDLEN_SET_OFIFO_OFFSET_SHIFT 0 + #define LDLEN_SET_OFIFO_OFFSET_MASK (3 << LDLEN_SET_OFIFO_OFFSET_SHIFT) + ++/* Special Length definitions when dst=sm, nfifo-{sm,m} */ ++#define LDLEN_MATH0 0 ++#define LDLEN_MATH1 1 ++#define LDLEN_MATH2 2 ++#define LDLEN_MATH3 3 ++ + /* + * FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE + * Command Constructs +@@ -355,6 +364,7 @@ #define FIFOLD_TYPE_PK_N (0x08 << FIFOLD_TYPE_SHIFT) #define FIFOLD_TYPE_PK_A (0x0c << FIFOLD_TYPE_SHIFT) #define FIFOLD_TYPE_PK_B (0x0d << FIFOLD_TYPE_SHIFT) @@ -10671,7 +13023,7 @@ Signed-off-by: Biwen Li /* Other types. Need to OR in last/flush bits as desired */ #define FIFOLD_TYPE_MSG_MASK (0x38 << FIFOLD_TYPE_SHIFT) -@@ -408,6 +410,7 @@ +@@ -408,6 +418,7 @@ #define FIFOST_TYPE_MESSAGE_DATA (0x30 << FIFOST_TYPE_SHIFT) #define FIFOST_TYPE_RNGSTORE (0x34 << FIFOST_TYPE_SHIFT) #define FIFOST_TYPE_RNGFIFO (0x35 << FIFOST_TYPE_SHIFT) @@ -10679,7 +13031,7 @@ Signed-off-by: Biwen Li #define FIFOST_TYPE_SKIP (0x3f << FIFOST_TYPE_SHIFT) /* -@@ -444,6 +447,18 @@ +@@ -444,6 +455,18 @@ #define OP_PCLID_DSAVERIFY (0x16 << OP_PCLID_SHIFT) #define OP_PCLID_RSAENC_PUBKEY (0x18 << OP_PCLID_SHIFT) #define OP_PCLID_RSADEC_PRVKEY (0x19 << OP_PCLID_SHIFT) @@ -10698,7 +13050,7 @@ Signed-off-by: Biwen Li /* Assuming OP_TYPE = OP_TYPE_DECAP_PROTOCOL/ENCAP_PROTOCOL */ #define OP_PCLID_IPSEC (0x01 << OP_PCLID_SHIFT) -@@ -1093,6 +1108,22 @@ +@@ -1093,6 +1116,22 @@ /* MacSec protinfos */ #define OP_PCL_MACSEC 0x0001 @@ -10721,7 +13073,60 @@ Signed-off-by: Biwen Li /* PKI unidirectional protocol protinfo bits */ #define OP_PCL_PKPROT_TEST 0x0008 #define OP_PCL_PKPROT_DECRYPT 0x0004 -@@ -1440,10 +1471,11 @@ +@@ -1105,6 +1144,12 @@ + #define OP_ALG_TYPE_CLASS1 (2 << OP_ALG_TYPE_SHIFT) + #define OP_ALG_TYPE_CLASS2 (4 << OP_ALG_TYPE_SHIFT) + ++/* version register fields */ ++#define OP_VER_CCHA_NUM 0x000000ff /* Number CCHAs instantiated */ ++#define OP_VER_CCHA_MISC 0x0000ff00 /* CCHA Miscellaneous Information */ ++#define OP_VER_CCHA_REV 0x00ff0000 /* CCHA Revision Number */ ++#define OP_VER_CCHA_VID 0xff000000 /* CCHA Version ID */ ++ + #define OP_ALG_ALGSEL_SHIFT 16 + #define OP_ALG_ALGSEL_MASK (0xff << OP_ALG_ALGSEL_SHIFT) + #define OP_ALG_ALGSEL_SUBMASK (0x0f << OP_ALG_ALGSEL_SHIFT) +@@ -1124,6 +1169,8 @@ + #define OP_ALG_ALGSEL_KASUMI (0x70 << OP_ALG_ALGSEL_SHIFT) + #define OP_ALG_ALGSEL_CRC (0x90 << OP_ALG_ALGSEL_SHIFT) + #define OP_ALG_ALGSEL_SNOW_F9 (0xA0 << OP_ALG_ALGSEL_SHIFT) ++#define OP_ALG_ALGSEL_CHACHA20 (0xD0 << OP_ALG_ALGSEL_SHIFT) ++#define OP_ALG_ALGSEL_POLY1305 (0xE0 << OP_ALG_ALGSEL_SHIFT) + + #define OP_ALG_AAI_SHIFT 4 + #define OP_ALG_AAI_MASK (0x1ff << OP_ALG_AAI_SHIFT) +@@ -1171,6 +1218,11 @@ + #define OP_ALG_AAI_RNG4_AI (0x80 << OP_ALG_AAI_SHIFT) + #define OP_ALG_AAI_RNG4_SK (0x100 << OP_ALG_AAI_SHIFT) + ++/* Chacha20 AAI set */ ++#define OP_ALG_AAI_AEAD (0x002 << OP_ALG_AAI_SHIFT) ++#define OP_ALG_AAI_KEYSTREAM (0x001 << OP_ALG_AAI_SHIFT) ++#define OP_ALG_AAI_BC8 (0x008 << OP_ALG_AAI_SHIFT) ++ + /* hmac/smac AAI set */ + #define OP_ALG_AAI_HASH (0x00 << OP_ALG_AAI_SHIFT) + #define OP_ALG_AAI_HMAC (0x01 << OP_ALG_AAI_SHIFT) +@@ -1359,6 +1411,7 @@ + #define MOVE_SRC_MATH3 (0x07 << MOVE_SRC_SHIFT) + #define MOVE_SRC_INFIFO (0x08 << MOVE_SRC_SHIFT) + #define MOVE_SRC_INFIFO_CL (0x09 << MOVE_SRC_SHIFT) ++#define MOVE_SRC_AUX_ABLK (0x0a << MOVE_SRC_SHIFT) + + #define MOVE_DEST_SHIFT 16 + #define MOVE_DEST_MASK (0x0f << MOVE_DEST_SHIFT) +@@ -1385,6 +1438,10 @@ + + #define MOVELEN_MRSEL_SHIFT 0 + #define MOVELEN_MRSEL_MASK (0x3 << MOVE_LEN_SHIFT) ++#define MOVELEN_MRSEL_MATH0 (0 << MOVELEN_MRSEL_SHIFT) ++#define MOVELEN_MRSEL_MATH1 (1 << MOVELEN_MRSEL_SHIFT) ++#define MOVELEN_MRSEL_MATH2 (2 << MOVELEN_MRSEL_SHIFT) ++#define MOVELEN_MRSEL_MATH3 (3 << MOVELEN_MRSEL_SHIFT) + + /* + * MATH Command Constructs +@@ -1440,10 +1497,11 @@ #define MATH_SRC1_REG2 (0x02 << MATH_SRC1_SHIFT) #define MATH_SRC1_REG3 (0x03 << MATH_SRC1_SHIFT) #define MATH_SRC1_IMM (0x04 << MATH_SRC1_SHIFT) @@ -10734,7 +13139,7 @@ Signed-off-by: Biwen Li /* Destination selectors */ #define MATH_DEST_SHIFT 8 -@@ -1452,6 +1484,7 @@ +@@ -1452,6 +1510,7 @@ #define MATH_DEST_REG1 (0x01 << MATH_DEST_SHIFT) #define MATH_DEST_REG2 (0x02 << MATH_DEST_SHIFT) #define MATH_DEST_REG3 (0x03 << MATH_DEST_SHIFT) @@ -10742,7 +13147,15 @@ Signed-off-by: Biwen Li #define MATH_DEST_SEQINLEN (0x08 << MATH_DEST_SHIFT) #define MATH_DEST_SEQOUTLEN (0x09 << MATH_DEST_SHIFT) #define MATH_DEST_VARSEQINLEN (0x0a << MATH_DEST_SHIFT) -@@ -1624,4 +1657,31 @@ +@@ -1560,6 +1619,7 @@ + #define NFIFOENTRY_DTYPE_IV (0x2 << NFIFOENTRY_DTYPE_SHIFT) + #define NFIFOENTRY_DTYPE_SAD (0x3 << NFIFOENTRY_DTYPE_SHIFT) + #define NFIFOENTRY_DTYPE_ICV (0xA << NFIFOENTRY_DTYPE_SHIFT) ++#define NFIFOENTRY_DTYPE_POLY (0xB << NFIFOENTRY_DTYPE_SHIFT) + #define NFIFOENTRY_DTYPE_SKIP (0xE << NFIFOENTRY_DTYPE_SHIFT) + #define NFIFOENTRY_DTYPE_MSG (0xF << NFIFOENTRY_DTYPE_SHIFT) + +@@ -1624,4 +1684,31 @@ /* Frame Descriptor Command for Replacement Job Descriptor */ #define FD_CMD_REPLACE_JOB_DESC 0x20000000 @@ -10794,15 +13207,16 @@ Signed-off-by: Biwen Li u32 command) { append_cmd(desc, command | IMMEDIATE | len); -@@ -189,6 +189,7 @@ static inline u32 *append_##cmd(u32 * co +@@ -189,6 +189,8 @@ static inline u32 *append_##cmd(u32 * co } APPEND_CMD_RET(jump, JUMP) APPEND_CMD_RET(move, MOVE) +APPEND_CMD_RET(moveb, MOVEB) ++APPEND_CMD_RET(move_len, MOVE_LEN) static inline void set_jump_tgt_here(u32 * const desc, u32 *jump_cmd) { -@@ -271,7 +272,7 @@ APPEND_SEQ_PTR_INTLEN(in, IN) +@@ -271,7 +273,7 @@ APPEND_SEQ_PTR_INTLEN(in, IN) APPEND_SEQ_PTR_INTLEN(out, OUT) #define APPEND_CMD_PTR_TO_IMM(cmd, op) \ @@ -10811,7 +13225,7 @@ Signed-off-by: Biwen Li unsigned int len, u32 options) \ { \ PRINT_POS; \ -@@ -312,7 +313,7 @@ APPEND_CMD_PTR_LEN(seq_out_ptr, SEQ_OUT_ +@@ -312,7 +314,7 @@ APPEND_CMD_PTR_LEN(seq_out_ptr, SEQ_OUT_ * from length of immediate data provided, e.g., split keys */ #define APPEND_CMD_PTR_TO_IMM2(cmd, op) \ @@ -10820,7 +13234,20 @@ Signed-off-by: Biwen Li unsigned int data_len, \ unsigned int len, u32 options) \ { \ -@@ -452,7 +453,7 @@ struct alginfo { +@@ -327,7 +329,11 @@ static inline void append_##cmd##_imm_## + u32 options) \ + { \ + PRINT_POS; \ +- append_cmd(desc, CMD_##op | IMMEDIATE | options | sizeof(type)); \ ++ if (options & LDST_LEN_MASK) \ ++ append_cmd(desc, CMD_##op | IMMEDIATE | options); \ ++ else \ ++ append_cmd(desc, CMD_##op | IMMEDIATE | options | \ ++ sizeof(type)); \ + append_cmd(desc, immediate); \ + } + APPEND_CMD_RAW_IMM(load, LOAD, u32); +@@ -452,7 +458,7 @@ struct alginfo { unsigned int keylen_pad; union { dma_addr_t key_dma; @@ -10829,7 +13256,7 @@ Signed-off-by: Biwen Li }; bool key_inline; }; -@@ -496,4 +497,45 @@ static inline int desc_inline_query(unsi +@@ -496,4 +502,45 @@ static inline int desc_inline_query(unsi return (rem_bytes >= 0) ? 0 : -1; } @@ -12471,7 +14898,20 @@ Signed-off-by: Biwen Li +#endif /* _DPSECI_CMD_H_ */ --- a/drivers/crypto/caam/error.c +++ b/drivers/crypto/caam/error.c -@@ -108,6 +108,54 @@ static const struct { +@@ -50,6 +50,12 @@ void caam_dump_sg(const char *level, con + #endif /* DEBUG */ + EXPORT_SYMBOL(caam_dump_sg); + ++bool caam_little_end; ++EXPORT_SYMBOL(caam_little_end); ++ ++bool caam_imx; ++EXPORT_SYMBOL(caam_imx); ++ + static const struct { + u8 value; + const char *error_text; +@@ -108,6 +114,54 @@ static const struct { { 0xF1, "3GPP HFN matches or exceeds the Threshold" }, }; @@ -12526,7 +14966,7 @@ Signed-off-by: Biwen Li static const char * const cha_id_list[] = { "", "AES", -@@ -236,6 +284,27 @@ static void report_deco_status(struct de +@@ -236,6 +290,27 @@ static void report_deco_status(struct de status, error, idx_str, idx, err_str, err_err_code); } @@ -12554,7 +14994,7 @@ Signed-off-by: Biwen Li static void report_jr_status(struct device *jrdev, const u32 status, const char *error) { -@@ -250,7 +319,7 @@ static void report_cond_code_status(stru +@@ -250,7 +325,7 @@ static void report_cond_code_status(stru status, error, __func__); } @@ -12563,7 +15003,7 @@ Signed-off-by: Biwen Li { static const struct stat_src { void (*report_ssed)(struct device *jrdev, const u32 status, -@@ -262,7 +331,7 @@ void caam_jr_strstatus(struct device *jr +@@ -262,7 +337,7 @@ void caam_jr_strstatus(struct device *jr { report_ccb_status, "CCB" }, { report_jump_status, "Jump" }, { report_deco_status, "DECO" }, @@ -12572,7 +15012,7 @@ Signed-off-by: Biwen Li { report_jr_status, "Job Ring" }, { report_cond_code_status, "Condition Code" }, { NULL, NULL }, -@@ -288,4 +357,4 @@ void caam_jr_strstatus(struct device *jr +@@ -288,4 +363,4 @@ void caam_jr_strstatus(struct device *jr else dev_err(jrdev, "%d: unknown error source\n", ssrc); } @@ -12595,17 +15035,140 @@ Signed-off-by: Biwen Li int rowsize, int groupsize, struct scatterlist *sg, --- a/drivers/crypto/caam/intern.h +++ b/drivers/crypto/caam/intern.h -@@ -84,6 +84,7 @@ struct caam_drv_private { +@@ -65,10 +65,6 @@ struct caam_drv_private_jr { + * Driver-private storage for a single CAAM block instance + */ + struct caam_drv_private { +-#ifdef CONFIG_CAAM_QI +- struct device *qidev; +-#endif +- + /* Physical-presence section */ + struct caam_ctrl __iomem *ctrl; /* controller region */ + struct caam_deco __iomem *deco; /* DECO/CCB views */ +@@ -76,14 +72,21 @@ struct caam_drv_private { + struct caam_queue_if __iomem *qi; /* QI control region */ + struct caam_job_ring __iomem *jr[4]; /* JobR's register space */ + ++ struct iommu_domain *domain; ++ + /* + * Detected geometry block. Filled in from device tree if powerpc, + * or from register-based version detection code + */ + u8 total_jobrs; /* Total Job Rings in device */ u8 qi_present; /* Nonzero if QI present in device */ ++#ifdef CONFIG_CAAM_QI ++ u8 qi_init; /* Nonzero if QI has been initialized */ ++#endif ++ u8 mc_en; /* Nonzero if MC f/w is active */ int secvio_irq; /* Security violation interrupt number */ int virt_en; /* Virtualization enabled in CAAM */ + int era; /* CAAM Era (internal HW revision) */ #define RNG4_MAX_HANDLES 2 /* RNG4 block */ +@@ -108,8 +111,95 @@ struct caam_drv_private { + #endif + }; + +-void caam_jr_algapi_init(struct device *dev); +-void caam_jr_algapi_remove(struct device *dev); ++#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API ++ ++int caam_algapi_init(struct device *dev); ++void caam_algapi_exit(void); ++ ++#else ++ ++static inline int caam_algapi_init(struct device *dev) ++{ ++ return 0; ++} ++ ++static inline void caam_algapi_exit(void) ++{ ++} ++ ++#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API */ ++ ++#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API ++ ++int caam_algapi_hash_init(struct device *dev); ++void caam_algapi_hash_exit(void); ++ ++#else ++ ++static inline int caam_algapi_hash_init(struct device *dev) ++{ ++ return 0; ++} ++ ++static inline void caam_algapi_hash_exit(void) ++{ ++} ++ ++#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API */ ++ ++#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API ++ ++int caam_pkc_init(struct device *dev); ++void caam_pkc_exit(void); ++ ++#else ++ ++static inline int caam_pkc_init(struct device *dev) ++{ ++ return 0; ++} ++ ++static inline void caam_pkc_exit(void) ++{ ++} ++ ++#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API */ ++ ++#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API ++ ++int caam_rng_init(struct device *dev); ++void caam_rng_exit(void); ++ ++#else ++ ++static inline int caam_rng_init(struct device *dev) ++{ ++ return 0; ++} ++ ++static inline void caam_rng_exit(void) ++{ ++} ++ ++#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API */ ++ ++#ifdef CONFIG_CAAM_QI ++ ++int caam_qi_algapi_init(struct device *dev); ++void caam_qi_algapi_exit(void); ++ ++#else ++ ++static inline int caam_qi_algapi_init(struct device *dev) ++{ ++ return 0; ++} ++ ++static inline void caam_qi_algapi_exit(void) ++{ ++} ++ ++#endif /* CONFIG_CAAM_QI */ + + #ifdef CONFIG_DEBUG_FS + static int caam_debugfs_u64_get(void *data, u64 *val) --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c -@@ -23,6 +23,14 @@ struct jr_driver_data { +@@ -23,6 +23,52 @@ struct jr_driver_data { static struct jr_driver_data driver_data; @@ -12616,11 +15179,59 @@ Signed-off-by: Biwen Li + return jr_driver_probed; +} +EXPORT_SYMBOL(caam_jr_driver_probed); ++ ++static DEFINE_MUTEX(algs_lock); ++static unsigned int active_devs; ++ ++static void register_algs(struct device *dev) ++{ ++ mutex_lock(&algs_lock); ++ ++ if (++active_devs != 1) ++ goto algs_unlock; ++ ++ caam_algapi_init(dev); ++ caam_algapi_hash_init(dev); ++ caam_pkc_init(dev); ++ caam_rng_init(dev); ++ caam_qi_algapi_init(dev); ++ ++algs_unlock: ++ mutex_unlock(&algs_lock); ++} ++ ++static void unregister_algs(void) ++{ ++ mutex_lock(&algs_lock); ++ ++ if (--active_devs != 0) ++ goto algs_unlock; ++ ++ caam_qi_algapi_exit(); ++ ++ caam_rng_exit(); ++ caam_pkc_exit(); ++ caam_algapi_hash_exit(); ++ caam_algapi_exit(); ++ ++algs_unlock: ++ mutex_unlock(&algs_lock); ++} + static int caam_reset_hw_jr(struct device *dev) { struct caam_drv_private_jr *jrp = dev_get_drvdata(dev); -@@ -119,6 +127,8 @@ static int caam_jr_remove(struct platfor +@@ -108,6 +154,9 @@ static int caam_jr_remove(struct platfor + return -EBUSY; + } + ++ /* Unregister JR-based RNG & crypto algorithms */ ++ unregister_algs(); ++ + /* Remove the node from Physical JobR list maintained by driver */ + spin_lock(&driver_data.jr_alloc_lock); + list_del(&jrpriv->list_node); +@@ -119,6 +168,8 @@ static int caam_jr_remove(struct platfor dev_err(jrdev, "Failed to shut down job ring\n"); irq_dispose_mapping(jrpriv->irq); @@ -12629,7 +15240,7 @@ Signed-off-by: Biwen Li return ret; } -@@ -282,6 +292,36 @@ struct device *caam_jr_alloc(void) +@@ -282,6 +333,36 @@ struct device *caam_jr_alloc(void) EXPORT_SYMBOL(caam_jr_alloc); /** @@ -12666,10 +15277,11 @@ Signed-off-by: Biwen Li * caam_jr_free() - Free the Job Ring * @rdev - points to the dev that identifies the Job ring to * be released. -@@ -539,6 +579,8 @@ static int caam_jr_probe(struct platform +@@ -539,6 +620,9 @@ static int caam_jr_probe(struct platform atomic_set(&jrpriv->tfm_count, 0); ++ register_algs(jrdev->parent); + jr_driver_probed++; + return 0; @@ -12776,7 +15388,32 @@ Signed-off-by: Biwen Li #include "regs.h" #include "qi.h" -@@ -105,23 +105,21 @@ static struct kmem_cache *qi_cache; +@@ -58,11 +58,9 @@ static DEFINE_PER_CPU(int, last_cpu); + /* + * caam_qi_priv - CAAM QI backend private params + * @cgr: QMan congestion group +- * @qi_pdev: platform device for QI backend + */ + struct caam_qi_priv { + struct qman_cgr cgr; +- struct platform_device *qi_pdev; + }; + + static struct caam_qi_priv qipriv ____cacheline_aligned; +@@ -102,26 +100,34 @@ static int mod_init_cpu; + */ + static struct kmem_cache *qi_cache; + ++static void *caam_iova_to_virt(struct iommu_domain *domain, ++ dma_addr_t iova_addr) ++{ ++ phys_addr_t phys_addr; ++ ++ phys_addr = domain ? iommu_iova_to_phys(domain, iova_addr) : iova_addr; ++ ++ return phys_to_virt(phys_addr); ++} ++ int caam_qi_enqueue(struct device *qidev, struct caam_drv_req *req) { struct qm_fd fd; @@ -12806,7 +15443,7 @@ Signed-off-by: Biwen Li if (likely(!ret)) return 0; -@@ -137,7 +135,7 @@ int caam_qi_enqueue(struct device *qidev +@@ -137,20 +143,21 @@ int caam_qi_enqueue(struct device *qidev EXPORT_SYMBOL(caam_qi_enqueue); static void caam_fq_ern_cb(struct qman_portal *qm, struct qman_fq *fq, @@ -12815,7 +15452,8 @@ Signed-off-by: Biwen Li { const struct qm_fd *fd; struct caam_drv_req *drv_req; -@@ -145,7 +143,7 @@ static void caam_fq_ern_cb(struct qman_p + struct device *qidev = &(raw_cpu_ptr(&pcpu_qipriv)->net_dev.dev); ++ struct caam_drv_private *priv = dev_get_drvdata(qidev); fd = &msg->ern.fd; @@ -12824,7 +15462,13 @@ Signed-off-by: Biwen Li dev_err(qidev, "Non-compound FD from CAAM\n"); return; } -@@ -180,20 +178,22 @@ static struct qman_fq *create_caam_req_f + +- drv_req = (struct caam_drv_req *)phys_to_virt(qm_fd_addr_get64(fd)); ++ drv_req = caam_iova_to_virt(priv->domain, qm_fd_addr_get64(fd)); + if (!drv_req) { + dev_err(qidev, + "Can't find original request for CAAM response\n"); +@@ -180,20 +187,22 @@ static struct qman_fq *create_caam_req_f req_fq->cb.fqs = NULL; ret = qman_create_fq(0, QMAN_FQ_FLAG_DYNAMIC_FQID | @@ -12856,7 +15500,7 @@ Signed-off-by: Biwen Li opts.fqd.cgid = qipriv.cgr.cgrid; ret = qman_init_fq(req_fq, fq_sched_flag, &opts); -@@ -207,7 +207,7 @@ static struct qman_fq *create_caam_req_f +@@ -207,7 +216,7 @@ static struct qman_fq *create_caam_req_f return req_fq; init_req_fq_fail: @@ -12865,7 +15509,7 @@ Signed-off-by: Biwen Li create_req_fq_fail: kfree(req_fq); return ERR_PTR(ret); -@@ -275,7 +275,7 @@ empty_fq: +@@ -275,7 +284,7 @@ empty_fq: if (ret) dev_err(qidev, "OOS of FQID: %u failed\n", fq->fqid); @@ -12874,7 +15518,7 @@ Signed-off-by: Biwen Li kfree(fq); return ret; -@@ -292,7 +292,7 @@ static int empty_caam_fq(struct qman_fq +@@ -292,7 +301,7 @@ static int empty_caam_fq(struct qman_fq if (ret) return ret; @@ -12883,11 +15527,29 @@ Signed-off-by: Biwen Li break; msleep(20); -@@ -572,22 +572,27 @@ static enum qman_cb_dqrr_result caam_rsp +@@ -495,7 +504,7 @@ EXPORT_SYMBOL(caam_drv_ctx_rel); + int caam_qi_shutdown(struct device *qidev) + { + int i, ret; +- struct caam_qi_priv *priv = dev_get_drvdata(qidev); ++ struct caam_qi_priv *priv = &qipriv; + const cpumask_t *cpus = qman_affine_cpus(); + struct cpumask old_cpumask = current->cpus_allowed; + +@@ -528,7 +537,6 @@ int caam_qi_shutdown(struct device *qide + /* Now that we're done with the CGRs, restore the cpus allowed mask */ + set_cpus_allowed_ptr(current, &old_cpumask); + +- platform_device_unregister(priv->qi_pdev); + return ret; + } + +@@ -572,22 +580,28 @@ static enum qman_cb_dqrr_result caam_rsp struct caam_drv_req *drv_req; const struct qm_fd *fd; struct device *qidev = &(raw_cpu_ptr(&pcpu_qipriv)->net_dev.dev); - u32 status; ++ struct caam_drv_private *priv = dev_get_drvdata(qidev); if (caam_qi_napi_schedule(p, caam_napi)) return qman_cb_dqrr_stop; @@ -12899,25 +15561,25 @@ Signed-off-by: Biwen Li + if (unlikely(fd->status)) { + u32 ssrc = fd->status & JRSTA_SSRC_MASK; + u8 err_id = fd->status & JRSTA_CCBERR_ERRID_MASK; -+ + +- if (unlikely(qm_fd_get_format(fd) != qm_fd_compound)) { + if (ssrc != JRSTA_SSRC_CCB_ERROR || + err_id != JRSTA_CCBERR_ERRID_ICVCHK) + dev_err(qidev, "Error: %#x in CAAM response FD\n", + fd->status); + } - -- if (unlikely(qm_fd_get_format(fd) != qm_fd_compound)) { ++ + if (unlikely(fd->format != qm_fd_compound)) { dev_err(qidev, "Non-compound FD from CAAM\n"); return qman_cb_dqrr_consume; } - drv_req = (struct caam_drv_req *)phys_to_virt(qm_fd_addr_get64(fd)); -+ drv_req = (struct caam_drv_req *)phys_to_virt(fd->addr); ++ drv_req = caam_iova_to_virt(priv->domain, qm_fd_addr_get64(fd)); if (unlikely(!drv_req)) { dev_err(qidev, "Can't find original request for caam response\n"); -@@ -597,7 +602,7 @@ static enum qman_cb_dqrr_result caam_rsp +@@ -597,7 +611,7 @@ static enum qman_cb_dqrr_result caam_rsp dma_unmap_single(drv_req->drv_ctx->qidev, qm_fd_addr(fd), sizeof(drv_req->fd_sgt), DMA_BIDIRECTIONAL); @@ -12926,7 +15588,7 @@ Signed-off-by: Biwen Li return qman_cb_dqrr_consume; } -@@ -621,17 +626,18 @@ static int alloc_rsp_fq_cpu(struct devic +@@ -621,17 +635,18 @@ static int alloc_rsp_fq_cpu(struct devic return -ENODEV; } @@ -12953,7 +15615,19 @@ Signed-off-by: Biwen Li ret = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &opts); if (ret) { -@@ -662,8 +668,7 @@ static int init_cgr(struct device *qidev +@@ -650,9 +665,8 @@ static int init_cgr(struct device *qidev + { + int ret; + struct qm_mcc_initcgr opts; +- const u64 cpus = *(u64 *)qman_affine_cpus(); +- const int num_cpus = hweight64(cpus); +- const u64 val = num_cpus * MAX_RSP_FQ_BACKLOG_PER_CPU; ++ const u64 val = (u64)cpumask_weight(qman_affine_cpus()) * ++ MAX_RSP_FQ_BACKLOG_PER_CPU; + + ret = qman_alloc_cgrid(&qipriv.cgr.cgrid); + if (ret) { +@@ -662,8 +676,7 @@ static int init_cgr(struct device *qidev qipriv.cgr.cb = cgr_cb; memset(&opts, 0, sizeof(opts)); @@ -12963,6 +15637,81 @@ Signed-off-by: Biwen Li opts.cgr.cscn_en = QM_CGR_EN; opts.cgr.mode = QMAN_CGR_MODE_FRAME; qm_cgr_cs_thres_set64(&opts.cgr.cs_thres, val, 1); +@@ -708,15 +721,10 @@ static void free_rsp_fqs(void) + int caam_qi_init(struct platform_device *caam_pdev) + { + int err, i; +- struct platform_device *qi_pdev; + struct device *ctrldev = &caam_pdev->dev, *qidev; + struct caam_drv_private *ctrlpriv; + const cpumask_t *cpus = qman_affine_cpus(); + struct cpumask old_cpumask = current->cpus_allowed; +- static struct platform_device_info qi_pdev_info = { +- .name = "caam_qi", +- .id = PLATFORM_DEVID_NONE +- }; + + /* + * QMAN requires CGRs to be removed from same CPU+portal from where it +@@ -728,24 +736,13 @@ int caam_qi_init(struct platform_device + mod_init_cpu = cpumask_first(cpus); + set_cpus_allowed_ptr(current, get_cpu_mask(mod_init_cpu)); + +- qi_pdev_info.parent = ctrldev; +- qi_pdev_info.dma_mask = dma_get_mask(ctrldev); +- qi_pdev = platform_device_register_full(&qi_pdev_info); +- if (IS_ERR(qi_pdev)) +- return PTR_ERR(qi_pdev); +- set_dma_ops(&qi_pdev->dev, get_dma_ops(ctrldev)); +- + ctrlpriv = dev_get_drvdata(ctrldev); +- qidev = &qi_pdev->dev; +- +- qipriv.qi_pdev = qi_pdev; +- dev_set_drvdata(qidev, &qipriv); ++ qidev = ctrldev; + + /* Initialize the congestion detection */ + err = init_cgr(qidev); + if (err) { + dev_err(qidev, "CGR initialization failed: %d\n", err); +- platform_device_unregister(qi_pdev); + return err; + } + +@@ -754,7 +751,6 @@ int caam_qi_init(struct platform_device + if (err) { + dev_err(qidev, "Can't allocate CAAM response FQs: %d\n", err); + free_rsp_fqs(); +- platform_device_unregister(qi_pdev); + return err; + } + +@@ -777,15 +773,11 @@ int caam_qi_init(struct platform_device + napi_enable(irqtask); + } + +- /* Hook up QI device to parent controlling caam device */ +- ctrlpriv->qidev = qidev; +- + qi_cache = kmem_cache_create("caamqicache", CAAM_QI_MEMCACHE_SIZE, 0, + SLAB_CACHE_DMA, NULL); + if (!qi_cache) { + dev_err(qidev, "Can't allocate CAAM cache\n"); + free_rsp_fqs(); +- platform_device_unregister(qi_pdev); + return -ENOMEM; + } + +@@ -795,6 +787,8 @@ int caam_qi_init(struct platform_device + debugfs_create_file("qi_congested", 0444, ctrlpriv->ctl, + ×_congested, &caam_fops_u64_ro); + #endif ++ ++ ctrlpriv->qi_init = 1; + dev_info(qidev, "Linux CAAM Queue I/F driver initialised\n"); + return 0; + } --- a/drivers/crypto/caam/qi.h +++ b/drivers/crypto/caam/qi.h @@ -9,7 +9,7 @@ @@ -12976,7 +15725,128 @@ Signed-off-by: Biwen Li #include "desc_constr.h" --- a/drivers/crypto/caam/regs.h +++ b/drivers/crypto/caam/regs.h -@@ -627,6 +627,8 @@ struct caam_job_ring { +@@ -3,6 +3,7 @@ + * CAAM hardware register-level view + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. ++ * Copyright 2018 NXP + */ + + #ifndef REGS_H +@@ -211,6 +212,47 @@ struct jr_outentry { + u32 jrstatus; /* Status for completed descriptor */ + } __packed; + ++/* Version registers (Era 10+) e80-eff */ ++struct version_regs { ++ u32 crca; /* CRCA_VERSION */ ++ u32 afha; /* AFHA_VERSION */ ++ u32 kfha; /* KFHA_VERSION */ ++ u32 pkha; /* PKHA_VERSION */ ++ u32 aesa; /* AESA_VERSION */ ++ u32 mdha; /* MDHA_VERSION */ ++ u32 desa; /* DESA_VERSION */ ++ u32 snw8a; /* SNW8A_VERSION */ ++ u32 snw9a; /* SNW9A_VERSION */ ++ u32 zuce; /* ZUCE_VERSION */ ++ u32 zuca; /* ZUCA_VERSION */ ++ u32 ccha; /* CCHA_VERSION */ ++ u32 ptha; /* PTHA_VERSION */ ++ u32 rng; /* RNG_VERSION */ ++ u32 trng; /* TRNG_VERSION */ ++ u32 aaha; /* AAHA_VERSION */ ++ u32 rsvd[10]; ++ u32 sr; /* SR_VERSION */ ++ u32 dma; /* DMA_VERSION */ ++ u32 ai; /* AI_VERSION */ ++ u32 qi; /* QI_VERSION */ ++ u32 jr; /* JR_VERSION */ ++ u32 deco; /* DECO_VERSION */ ++}; ++ ++/* Version registers bitfields */ ++ ++/* Number of CHAs instantiated */ ++#define CHA_VER_NUM_MASK 0xffull ++/* CHA Miscellaneous Information */ ++#define CHA_VER_MISC_SHIFT 8 ++#define CHA_VER_MISC_MASK (0xffull << CHA_VER_MISC_SHIFT) ++/* CHA Revision Number */ ++#define CHA_VER_REV_SHIFT 16 ++#define CHA_VER_REV_MASK (0xffull << CHA_VER_REV_SHIFT) ++/* CHA Version ID */ ++#define CHA_VER_VID_SHIFT 24 ++#define CHA_VER_VID_MASK (0xffull << CHA_VER_VID_SHIFT) ++ + /* + * caam_perfmon - Performance Monitor/Secure Memory Status/ + * CAAM Global Status/Component Version IDs +@@ -223,15 +265,13 @@ struct jr_outentry { + #define CHA_NUM_MS_DECONUM_MASK (0xfull << CHA_NUM_MS_DECONUM_SHIFT) + + /* +- * CHA version IDs / instantiation bitfields ++ * CHA version IDs / instantiation bitfields (< Era 10) + * Defined for use with the cha_id fields in perfmon, but the same shift/mask + * selectors can be used to pull out the number of instantiated blocks within + * cha_num fields in perfmon because the locations are the same. + */ + #define CHA_ID_LS_AES_SHIFT 0 + #define CHA_ID_LS_AES_MASK (0xfull << CHA_ID_LS_AES_SHIFT) +-#define CHA_ID_LS_AES_LP (0x3ull << CHA_ID_LS_AES_SHIFT) +-#define CHA_ID_LS_AES_HP (0x4ull << CHA_ID_LS_AES_SHIFT) + + #define CHA_ID_LS_DES_SHIFT 4 + #define CHA_ID_LS_DES_MASK (0xfull << CHA_ID_LS_DES_SHIFT) +@@ -241,9 +281,6 @@ struct jr_outentry { + + #define CHA_ID_LS_MD_SHIFT 12 + #define CHA_ID_LS_MD_MASK (0xfull << CHA_ID_LS_MD_SHIFT) +-#define CHA_ID_LS_MD_LP256 (0x0ull << CHA_ID_LS_MD_SHIFT) +-#define CHA_ID_LS_MD_LP512 (0x1ull << CHA_ID_LS_MD_SHIFT) +-#define CHA_ID_LS_MD_HP (0x2ull << CHA_ID_LS_MD_SHIFT) + + #define CHA_ID_LS_RNG_SHIFT 16 + #define CHA_ID_LS_RNG_MASK (0xfull << CHA_ID_LS_RNG_SHIFT) +@@ -269,6 +306,13 @@ struct jr_outentry { + #define CHA_ID_MS_JR_SHIFT 28 + #define CHA_ID_MS_JR_MASK (0xfull << CHA_ID_MS_JR_SHIFT) + ++/* Specific CHA version IDs */ ++#define CHA_VER_VID_AES_LP 0x3ull ++#define CHA_VER_VID_AES_HP 0x4ull ++#define CHA_VER_VID_MD_LP256 0x0ull ++#define CHA_VER_VID_MD_LP512 0x1ull ++#define CHA_VER_VID_MD_HP 0x2ull ++ + struct sec_vid { + u16 ip_id; + u8 maj_rev; +@@ -473,8 +517,10 @@ struct caam_ctrl { + struct rng4tst r4tst[2]; + }; + +- u32 rsvd9[448]; ++ u32 rsvd9[416]; + ++ /* Version registers - introduced with era 10 e80-eff */ ++ struct version_regs vreg; + /* Performance Monitor f00-fff */ + struct caam_perfmon perfmon; + }; +@@ -564,8 +610,10 @@ struct caam_job_ring { + u32 rsvd11; + u32 jrcommand; /* JRCRx - JobR command */ + +- u32 rsvd12[932]; ++ u32 rsvd12[900]; + ++ /* Version registers - introduced with era 10 e80-eff */ ++ struct version_regs vreg; + /* Performance Monitor f00-fff */ + struct caam_perfmon perfmon; + }; +@@ -627,6 +675,8 @@ struct caam_job_ring { #define JRSTA_DECOERR_INVSIGN 0x86 #define JRSTA_DECOERR_DSASIGN 0x87 @@ -12985,6 +15855,28 @@ Signed-off-by: Biwen Li #define JRSTA_CCBERR_JUMP 0x08000000 #define JRSTA_CCBERR_INDEX_MASK 0xff00 #define JRSTA_CCBERR_INDEX_SHIFT 8 +@@ -870,13 +920,19 @@ struct caam_deco { + u32 rsvd29[48]; + u32 descbuf[64]; /* DxDESB - Descriptor buffer */ + u32 rscvd30[193]; +-#define DESC_DBG_DECO_STAT_HOST_ERR 0x00D00000 + #define DESC_DBG_DECO_STAT_VALID 0x80000000 + #define DESC_DBG_DECO_STAT_MASK 0x00F00000 ++#define DESC_DBG_DECO_STAT_SHIFT 20 + u32 desc_dbg; /* DxDDR - DECO Debug Register */ +- u32 rsvd31[126]; ++ u32 rsvd31[13]; ++#define DESC_DER_DECO_STAT_MASK 0x000F0000 ++#define DESC_DER_DECO_STAT_SHIFT 16 ++ u32 dbg_exec; /* DxDER - DECO Debug Exec Register */ ++ u32 rsvd32[112]; + }; + ++#define DECO_STAT_HOST_ERR 0xD ++ + #define DECO_JQCR_WHL 0x20000000 + #define DECO_JQCR_FOUR 0x10000000 + --- a/drivers/crypto/caam/sg_sw_qm.h +++ b/drivers/crypto/caam/sg_sw_qm.h @@ -34,46 +34,61 @@ @@ -13091,3 +15983,13 @@ Signed-off-by: Biwen Li if (ret > 1) { tbl_off += ret; sync_needed = true; +--- a/include/crypto/chacha20.h ++++ b/include/crypto/chacha20.h +@@ -13,6 +13,7 @@ + #define CHACHA20_IV_SIZE 16 + #define CHACHA20_KEY_SIZE 32 + #define CHACHA20_BLOCK_SIZE 64 ++#define CHACHAPOLY_IV_SIZE 12 + + struct chacha20_ctx { + u32 key[8]; diff --git a/target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch b/target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch index e5c3b7db08..99863c47a0 100644 --- a/target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/823-pm-support-layerscape.patch @@ -1,113 +1,28 @@ -From aded309f403c4202b9c6f61ea6a635e0c736eb77 Mon Sep 17 00:00:00 2001 +From 62ac0c4fda3b40a8994f2abfdc52784ced80c83b Mon Sep 17 00:00:00 2001 From: Biwen Li -Date: Tue, 30 Oct 2018 18:27:07 +0800 -Subject: [PATCH 40/40] pm: support layerscape +Date: Wed, 17 Apr 2019 18:58:51 +0800 +Subject: [PATCH] pm: support layerscape + This is an integrated patch of pm for layerscape +Signed-off-by: Biwen Li Signed-off-by: Chenhui Zhao Signed-off-by: Hongbo Zhang Signed-off-by: Li Yang Signed-off-by: Ran Wang Signed-off-by: Tang Yuantian +Signed-off-by: Yinbo Zhu Signed-off-by: Zhao Chenhui -Signed-off-by: Biwen Li --- - .../devicetree/bindings/powerpc/fsl/pmc.txt | 59 ++-- - drivers/firmware/psci.c | 16 +- - drivers/soc/fsl/rcpm.c | 158 ++++++++++ - drivers/soc/fsl/sleep_fsm.c | 279 ++++++++++++++++++ - drivers/soc/fsl/sleep_fsm.h | 130 ++++++++ - 5 files changed, 615 insertions(+), 27 deletions(-) + drivers/firmware/psci.c | 16 ++- + drivers/soc/fsl/rcpm.c | 156 ++++++++++++++++++++ + drivers/soc/fsl/sleep_fsm.c | 279 ++++++++++++++++++++++++++++++++++++ + drivers/soc/fsl/sleep_fsm.h | 130 +++++++++++++++++ + 4 files changed, 579 insertions(+), 2 deletions(-) create mode 100644 drivers/soc/fsl/rcpm.c create mode 100644 drivers/soc/fsl/sleep_fsm.c create mode 100644 drivers/soc/fsl/sleep_fsm.h ---- a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt -+++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt -@@ -9,15 +9,20 @@ Properties: - - "fsl,mpc8548-pmc" should be listed for any chip whose PMC is - compatible. "fsl,mpc8536-pmc" should also be listed for any chip -- whose PMC is compatible, and implies deep-sleep capability. -+ whose PMC is compatible, and implies deep-sleep capability and -+ wake on user defined packet(wakeup on ARP). -+ -+ "fsl,p1022-pmc" should be listed for any chip whose PMC is -+ compatible, and implies lossless Ethernet capability during sleep. - - "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is - compatible; all statements below that apply to "fsl,mpc8548-pmc" also - apply to "fsl,mpc8641d-pmc". - - Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these -- bit assignments are indicated via the sleep specifier in each device's -- sleep property. -+ bit assignments are indicated via the clock nodes. Device which has a -+ controllable clock source should have a "fsl,pmc-handle" property pointing -+ to the clock node. - - - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource - is the PMC block, and the second resource is the Clock Configuration -@@ -33,31 +38,35 @@ Properties: - this is a phandle to an "fsl,gtm" node on which timer 4 can be used as - a wakeup source from deep sleep. - --Sleep specifiers: -- -- fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit -- that is set in the cell, the corresponding bit in SCCR will be saved -- and cleared on suspend, and restored on resume. This sleep controller -- supports disabling and resuming devices at any time. -- -- fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of -- which will be ORed into PMCDR upon suspend, and cleared from PMCDR -- upon resume. The first two cells are as described for fsl,mpc8578-pmc. -- This sleep controller only supports disabling devices during system -- sleep, or permanently. -- -- fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the -- first of which will be ORed into DEVDISR (and the second into -- DEVDISR2, if present -- this cell should be zero or absent if the -- hardware does not have DEVDISR2) upon a request for permanent device -- disabling. This sleep controller does not support configuring devices -- to disable during system sleep (unless supported by another compatible -- match), or dynamically. -+Clock nodes: -+The clock nodes are to describe the masks in PM controller registers for each -+soc clock. -+- fsl,pmcdr-mask: For "fsl,mpc8548-pmc"-compatible devices, the mask will be -+ ORed into PMCDR before suspend if the device using this clock is the wake-up -+ source and need to be running during low power mode; clear the mask if -+ otherwise. -+ -+- fsl,sccr-mask: For "fsl,mpc8349-pmc"-compatible devices, the corresponding -+ bit specified by the mask in SCCR will be saved and cleared on suspend, and -+ restored on resume. -+ -+- fsl,devdisr-mask: Contain one or two cells, depending on the availability of -+ DEVDISR2 register. For compatible devices, the mask will be ORed into DEVDISR -+ or DEVDISR2 when the clock should be permenently disabled. - - Example: - -- power@b00 { -- compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; -- reg = <0xb00 0x100 0xa00 0x100>; -- interrupts = <80 8>; -+ power@e0070 { -+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; -+ reg = <0xe0070 0x20>; -+ -+ etsec1_clk: soc-clk@24 { -+ fsl,pmcdr-mask = <0x00000080>; -+ }; -+ etsec2_clk: soc-clk@25 { -+ fsl,pmcdr-mask = <0x00000040>; -+ }; -+ etsec3_clk: soc-clk@26 { -+ fsl,pmcdr-mask = <0x00000020>; -+ }; - }; --- a/drivers/firmware/psci.c +++ b/drivers/firmware/psci.c @@ -437,8 +437,18 @@ CPUIDLE_METHOD_OF_DECLARE(psci, "psci", @@ -142,7 +57,7 @@ Signed-off-by: Biwen Li /* --- /dev/null +++ b/drivers/soc/fsl/rcpm.c -@@ -0,0 +1,158 @@ +@@ -0,0 +1,156 @@ +/* + * Run Control and Power Management (RCPM) driver + * @@ -278,10 +193,8 @@ Signed-off-by: Biwen Li + struct device_node *np; + + np = of_find_matching_node_and_match(NULL, rcpm_matches, &match); -+ if (!np) { -+ pr_err("Can't find the RCPM node.\n"); ++ if (!np) + return -EINVAL; -+ } + + if (match->data) + rcpm = (struct rcpm_config *)match->data; diff --git a/target/linux/layerscape/patches-4.14/824-mmc-sdhci-of-esdhc-add-voltage-switch-support-for-ls.patch b/target/linux/layerscape/patches-4.14/824-mmc-sdhci-of-esdhc-add-voltage-switch-support-for-ls.patch deleted file mode 100644 index 969fe3f375..0000000000 --- a/target/linux/layerscape/patches-4.14/824-mmc-sdhci-of-esdhc-add-voltage-switch-support-for-ls.patch +++ /dev/null @@ -1,23 +0,0 @@ -From bb7412794db9b48dc4cc041c75d380e512dfff2a Mon Sep 17 00:00:00 2001 -From: Mathew McBride -Date: Tue, 20 Nov 2018 14:36:54 +0800 -Subject: [PATCH] mmc: sdhci-of-esdhc: add voltage switch support for ls1043a - -Added voltage switch support for ls1043a. - -Signed-off-by: Mathew McBride -Signed-off-by: Yangbo Lu ---- - drivers/mmc/host/sdhci-of-esdhc.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/mmc/host/sdhci-of-esdhc.c -+++ b/drivers/mmc/host/sdhci-of-esdhc.c -@@ -661,6 +661,7 @@ static void esdhc_reset(struct sdhci_hos - static const struct of_device_id scfg_device_ids[] = { - { .compatible = "fsl,t1040-scfg", }, - { .compatible = "fsl,ls1012a-scfg", }, -+ { .compatible = "fsl,ls1043a-scfg", }, - { .compatible = "fsl,ls1046a-scfg", }, - {} - }; diff --git a/target/linux/layerscape/patches-4.14/824-ptp-support-layerscape.patch b/target/linux/layerscape/patches-4.14/824-ptp-support-layerscape.patch new file mode 100644 index 0000000000..5664e18094 --- /dev/null +++ b/target/linux/layerscape/patches-4.14/824-ptp-support-layerscape.patch @@ -0,0 +1,1399 @@ +From bba7af6efb0aad1d52ee5e7d80f9e2ab59d85e20 Mon Sep 17 00:00:00 2001 +From: Biwen Li +Date: Wed, 17 Apr 2019 18:58:52 +0800 +Subject: [PATCH] ptp: support layerscape + +This is an integrated patch of ptp for layerscape + +Signed-off-by: Arnd Bergmann +Signed-off-by: Biwen Li +Signed-off-by: David S. Miller +Signed-off-by: Yangbo Lu +--- + drivers/net/ethernet/freescale/Makefile | 1 - + drivers/net/ethernet/freescale/gianfar_ptp.c | 572 ------------------ + drivers/ptp/Makefile | 1 + + drivers/ptp/ptp_chardev.c | 4 +- + drivers/ptp/ptp_qoriq.c | 589 +++++++++++++++++++ + include/linux/fsl/ptp_qoriq.h | 169 ++++++ + 6 files changed, 761 insertions(+), 575 deletions(-) + delete mode 100644 drivers/net/ethernet/freescale/gianfar_ptp.c + create mode 100644 drivers/ptp/ptp_qoriq.c + create mode 100644 include/linux/fsl/ptp_qoriq.h + +--- a/drivers/net/ethernet/freescale/Makefile ++++ b/drivers/net/ethernet/freescale/Makefile +@@ -14,7 +14,6 @@ obj-$(CONFIG_FS_ENET) += fs_enet/ + obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o + obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o + obj-$(CONFIG_GIANFAR) += gianfar_driver.o +-obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o + gianfar_driver-objs := gianfar.o \ + gianfar_ethtool.o + obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o +--- a/drivers/net/ethernet/freescale/gianfar_ptp.c ++++ /dev/null +@@ -1,572 +0,0 @@ +-/* +- * PTP 1588 clock using the eTSEC +- * +- * Copyright (C) 2010 OMICRON electronics GmbH +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- * +- * This program is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License +- * along with this program; if not, write to the Free Software +- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +- */ +- +-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +- +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +- +-#include +- +-#include "gianfar.h" +- +-/* +- * gianfar ptp registers +- * Generated by regen.tcl on Thu May 13 01:38:57 PM CEST 2010 +- */ +-struct gianfar_ptp_registers { +- u32 tmr_ctrl; /* Timer control register */ +- u32 tmr_tevent; /* Timestamp event register */ +- u32 tmr_temask; /* Timer event mask register */ +- u32 tmr_pevent; /* Timestamp event register */ +- u32 tmr_pemask; /* Timer event mask register */ +- u32 tmr_stat; /* Timestamp status register */ +- u32 tmr_cnt_h; /* Timer counter high register */ +- u32 tmr_cnt_l; /* Timer counter low register */ +- u32 tmr_add; /* Timer drift compensation addend register */ +- u32 tmr_acc; /* Timer accumulator register */ +- u32 tmr_prsc; /* Timer prescale */ +- u8 res1[4]; +- u32 tmroff_h; /* Timer offset high */ +- u32 tmroff_l; /* Timer offset low */ +- u8 res2[8]; +- u32 tmr_alarm1_h; /* Timer alarm 1 high register */ +- u32 tmr_alarm1_l; /* Timer alarm 1 high register */ +- u32 tmr_alarm2_h; /* Timer alarm 2 high register */ +- u32 tmr_alarm2_l; /* Timer alarm 2 high register */ +- u8 res3[48]; +- u32 tmr_fiper1; /* Timer fixed period interval */ +- u32 tmr_fiper2; /* Timer fixed period interval */ +- u32 tmr_fiper3; /* Timer fixed period interval */ +- u8 res4[20]; +- u32 tmr_etts1_h; /* Timestamp of general purpose external trigger */ +- u32 tmr_etts1_l; /* Timestamp of general purpose external trigger */ +- u32 tmr_etts2_h; /* Timestamp of general purpose external trigger */ +- u32 tmr_etts2_l; /* Timestamp of general purpose external trigger */ +-}; +- +-/* Bit definitions for the TMR_CTRL register */ +-#define ALM1P (1<<31) /* Alarm1 output polarity */ +-#define ALM2P (1<<30) /* Alarm2 output polarity */ +-#define FIPERST (1<<28) /* FIPER start indication */ +-#define PP1L (1<<27) /* Fiper1 pulse loopback mode enabled. */ +-#define PP2L (1<<26) /* Fiper2 pulse loopback mode enabled. */ +-#define TCLK_PERIOD_SHIFT (16) /* 1588 timer reference clock period. */ +-#define TCLK_PERIOD_MASK (0x3ff) +-#define RTPE (1<<15) /* Record Tx Timestamp to PAL Enable. */ +-#define FRD (1<<14) /* FIPER Realignment Disable */ +-#define ESFDP (1<<11) /* External Tx/Rx SFD Polarity. */ +-#define ESFDE (1<<10) /* External Tx/Rx SFD Enable. */ +-#define ETEP2 (1<<9) /* External trigger 2 edge polarity */ +-#define ETEP1 (1<<8) /* External trigger 1 edge polarity */ +-#define COPH (1<<7) /* Generated clock output phase. */ +-#define CIPH (1<<6) /* External oscillator input clock phase */ +-#define TMSR (1<<5) /* Timer soft reset. */ +-#define BYP (1<<3) /* Bypass drift compensated clock */ +-#define TE (1<<2) /* 1588 timer enable. */ +-#define CKSEL_SHIFT (0) /* 1588 Timer reference clock source */ +-#define CKSEL_MASK (0x3) +- +-/* Bit definitions for the TMR_TEVENT register */ +-#define ETS2 (1<<25) /* External trigger 2 timestamp sampled */ +-#define ETS1 (1<<24) /* External trigger 1 timestamp sampled */ +-#define ALM2 (1<<17) /* Current time = alarm time register 2 */ +-#define ALM1 (1<<16) /* Current time = alarm time register 1 */ +-#define PP1 (1<<7) /* periodic pulse generated on FIPER1 */ +-#define PP2 (1<<6) /* periodic pulse generated on FIPER2 */ +-#define PP3 (1<<5) /* periodic pulse generated on FIPER3 */ +- +-/* Bit definitions for the TMR_TEMASK register */ +-#define ETS2EN (1<<25) /* External trigger 2 timestamp enable */ +-#define ETS1EN (1<<24) /* External trigger 1 timestamp enable */ +-#define ALM2EN (1<<17) /* Timer ALM2 event enable */ +-#define ALM1EN (1<<16) /* Timer ALM1 event enable */ +-#define PP1EN (1<<7) /* Periodic pulse event 1 enable */ +-#define PP2EN (1<<6) /* Periodic pulse event 2 enable */ +- +-/* Bit definitions for the TMR_PEVENT register */ +-#define TXP2 (1<<9) /* PTP transmitted timestamp im TXTS2 */ +-#define TXP1 (1<<8) /* PTP transmitted timestamp in TXTS1 */ +-#define RXP (1<<0) /* PTP frame has been received */ +- +-/* Bit definitions for the TMR_PEMASK register */ +-#define TXP2EN (1<<9) /* Transmit PTP packet event 2 enable */ +-#define TXP1EN (1<<8) /* Transmit PTP packet event 1 enable */ +-#define RXPEN (1<<0) /* Receive PTP packet event enable */ +- +-/* Bit definitions for the TMR_STAT register */ +-#define STAT_VEC_SHIFT (0) /* Timer general purpose status vector */ +-#define STAT_VEC_MASK (0x3f) +- +-/* Bit definitions for the TMR_PRSC register */ +-#define PRSC_OCK_SHIFT (0) /* Output clock division/prescale factor. */ +-#define PRSC_OCK_MASK (0xffff) +- +- +-#define DRIVER "gianfar_ptp" +-#define DEFAULT_CKSEL 1 +-#define N_EXT_TS 2 +-#define REG_SIZE sizeof(struct gianfar_ptp_registers) +- +-struct etsects { +- struct gianfar_ptp_registers __iomem *regs; +- spinlock_t lock; /* protects regs */ +- struct ptp_clock *clock; +- struct ptp_clock_info caps; +- struct resource *rsrc; +- int irq; +- u64 alarm_interval; /* for periodic alarm */ +- u64 alarm_value; +- u32 tclk_period; /* nanoseconds */ +- u32 tmr_prsc; +- u32 tmr_add; +- u32 cksel; +- u32 tmr_fiper1; +- u32 tmr_fiper2; +-}; +- +-/* +- * Register access functions +- */ +- +-/* Caller must hold etsects->lock. */ +-static u64 tmr_cnt_read(struct etsects *etsects) +-{ +- u64 ns; +- u32 lo, hi; +- +- lo = gfar_read(&etsects->regs->tmr_cnt_l); +- hi = gfar_read(&etsects->regs->tmr_cnt_h); +- ns = ((u64) hi) << 32; +- ns |= lo; +- return ns; +-} +- +-/* Caller must hold etsects->lock. */ +-static void tmr_cnt_write(struct etsects *etsects, u64 ns) +-{ +- u32 hi = ns >> 32; +- u32 lo = ns & 0xffffffff; +- +- gfar_write(&etsects->regs->tmr_cnt_l, lo); +- gfar_write(&etsects->regs->tmr_cnt_h, hi); +-} +- +-/* Caller must hold etsects->lock. */ +-static void set_alarm(struct etsects *etsects) +-{ +- u64 ns; +- u32 lo, hi; +- +- ns = tmr_cnt_read(etsects) + 1500000000ULL; +- ns = div_u64(ns, 1000000000UL) * 1000000000ULL; +- ns -= etsects->tclk_period; +- hi = ns >> 32; +- lo = ns & 0xffffffff; +- gfar_write(&etsects->regs->tmr_alarm1_l, lo); +- gfar_write(&etsects->regs->tmr_alarm1_h, hi); +-} +- +-/* Caller must hold etsects->lock. */ +-static void set_fipers(struct etsects *etsects) +-{ +- set_alarm(etsects); +- gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1); +- gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2); +-} +- +-/* +- * Interrupt service routine +- */ +- +-static irqreturn_t isr(int irq, void *priv) +-{ +- struct etsects *etsects = priv; +- struct ptp_clock_event event; +- u64 ns; +- u32 ack = 0, lo, hi, mask, val; +- +- val = gfar_read(&etsects->regs->tmr_tevent); +- +- if (val & ETS1) { +- ack |= ETS1; +- hi = gfar_read(&etsects->regs->tmr_etts1_h); +- lo = gfar_read(&etsects->regs->tmr_etts1_l); +- event.type = PTP_CLOCK_EXTTS; +- event.index = 0; +- event.timestamp = ((u64) hi) << 32; +- event.timestamp |= lo; +- ptp_clock_event(etsects->clock, &event); +- } +- +- if (val & ETS2) { +- ack |= ETS2; +- hi = gfar_read(&etsects->regs->tmr_etts2_h); +- lo = gfar_read(&etsects->regs->tmr_etts2_l); +- event.type = PTP_CLOCK_EXTTS; +- event.index = 1; +- event.timestamp = ((u64) hi) << 32; +- event.timestamp |= lo; +- ptp_clock_event(etsects->clock, &event); +- } +- +- if (val & ALM2) { +- ack |= ALM2; +- if (etsects->alarm_value) { +- event.type = PTP_CLOCK_ALARM; +- event.index = 0; +- event.timestamp = etsects->alarm_value; +- ptp_clock_event(etsects->clock, &event); +- } +- if (etsects->alarm_interval) { +- ns = etsects->alarm_value + etsects->alarm_interval; +- hi = ns >> 32; +- lo = ns & 0xffffffff; +- spin_lock(&etsects->lock); +- gfar_write(&etsects->regs->tmr_alarm2_l, lo); +- gfar_write(&etsects->regs->tmr_alarm2_h, hi); +- spin_unlock(&etsects->lock); +- etsects->alarm_value = ns; +- } else { +- gfar_write(&etsects->regs->tmr_tevent, ALM2); +- spin_lock(&etsects->lock); +- mask = gfar_read(&etsects->regs->tmr_temask); +- mask &= ~ALM2EN; +- gfar_write(&etsects->regs->tmr_temask, mask); +- spin_unlock(&etsects->lock); +- etsects->alarm_value = 0; +- etsects->alarm_interval = 0; +- } +- } +- +- if (val & PP1) { +- ack |= PP1; +- event.type = PTP_CLOCK_PPS; +- ptp_clock_event(etsects->clock, &event); +- } +- +- if (ack) { +- gfar_write(&etsects->regs->tmr_tevent, ack); +- return IRQ_HANDLED; +- } else +- return IRQ_NONE; +-} +- +-/* +- * PTP clock operations +- */ +- +-static int ptp_gianfar_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +-{ +- u64 adj, diff; +- u32 tmr_add; +- int neg_adj = 0; +- struct etsects *etsects = container_of(ptp, struct etsects, caps); +- +- if (scaled_ppm < 0) { +- neg_adj = 1; +- scaled_ppm = -scaled_ppm; +- } +- tmr_add = etsects->tmr_add; +- adj = tmr_add; +- +- /* calculate diff as adj*(scaled_ppm/65536)/1000000 +- * and round() to the nearest integer +- */ +- adj *= scaled_ppm; +- diff = div_u64(adj, 8000000); +- diff = (diff >> 13) + ((diff >> 12) & 1); +- +- tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff; +- +- gfar_write(&etsects->regs->tmr_add, tmr_add); +- +- return 0; +-} +- +-static int ptp_gianfar_adjtime(struct ptp_clock_info *ptp, s64 delta) +-{ +- s64 now; +- unsigned long flags; +- struct etsects *etsects = container_of(ptp, struct etsects, caps); +- +- spin_lock_irqsave(&etsects->lock, flags); +- +- now = tmr_cnt_read(etsects); +- now += delta; +- tmr_cnt_write(etsects, now); +- set_fipers(etsects); +- +- spin_unlock_irqrestore(&etsects->lock, flags); +- +- return 0; +-} +- +-static int ptp_gianfar_gettime(struct ptp_clock_info *ptp, +- struct timespec64 *ts) +-{ +- u64 ns; +- unsigned long flags; +- struct etsects *etsects = container_of(ptp, struct etsects, caps); +- +- spin_lock_irqsave(&etsects->lock, flags); +- +- ns = tmr_cnt_read(etsects); +- +- spin_unlock_irqrestore(&etsects->lock, flags); +- +- *ts = ns_to_timespec64(ns); +- +- return 0; +-} +- +-static int ptp_gianfar_settime(struct ptp_clock_info *ptp, +- const struct timespec64 *ts) +-{ +- u64 ns; +- unsigned long flags; +- struct etsects *etsects = container_of(ptp, struct etsects, caps); +- +- ns = timespec64_to_ns(ts); +- +- spin_lock_irqsave(&etsects->lock, flags); +- +- tmr_cnt_write(etsects, ns); +- set_fipers(etsects); +- +- spin_unlock_irqrestore(&etsects->lock, flags); +- +- return 0; +-} +- +-static int ptp_gianfar_enable(struct ptp_clock_info *ptp, +- struct ptp_clock_request *rq, int on) +-{ +- struct etsects *etsects = container_of(ptp, struct etsects, caps); +- unsigned long flags; +- u32 bit, mask; +- +- switch (rq->type) { +- case PTP_CLK_REQ_EXTTS: +- switch (rq->extts.index) { +- case 0: +- bit = ETS1EN; +- break; +- case 1: +- bit = ETS2EN; +- break; +- default: +- return -EINVAL; +- } +- spin_lock_irqsave(&etsects->lock, flags); +- mask = gfar_read(&etsects->regs->tmr_temask); +- if (on) +- mask |= bit; +- else +- mask &= ~bit; +- gfar_write(&etsects->regs->tmr_temask, mask); +- spin_unlock_irqrestore(&etsects->lock, flags); +- return 0; +- +- case PTP_CLK_REQ_PPS: +- spin_lock_irqsave(&etsects->lock, flags); +- mask = gfar_read(&etsects->regs->tmr_temask); +- if (on) +- mask |= PP1EN; +- else +- mask &= ~PP1EN; +- gfar_write(&etsects->regs->tmr_temask, mask); +- spin_unlock_irqrestore(&etsects->lock, flags); +- return 0; +- +- default: +- break; +- } +- +- return -EOPNOTSUPP; +-} +- +-static const struct ptp_clock_info ptp_gianfar_caps = { +- .owner = THIS_MODULE, +- .name = "gianfar clock", +- .max_adj = 512000, +- .n_alarm = 0, +- .n_ext_ts = N_EXT_TS, +- .n_per_out = 0, +- .n_pins = 0, +- .pps = 1, +- .adjfine = ptp_gianfar_adjfine, +- .adjtime = ptp_gianfar_adjtime, +- .gettime64 = ptp_gianfar_gettime, +- .settime64 = ptp_gianfar_settime, +- .enable = ptp_gianfar_enable, +-}; +- +-static int gianfar_ptp_probe(struct platform_device *dev) +-{ +- struct device_node *node = dev->dev.of_node; +- struct etsects *etsects; +- struct timespec64 now; +- int err = -ENOMEM; +- u32 tmr_ctrl; +- unsigned long flags; +- +- etsects = kzalloc(sizeof(*etsects), GFP_KERNEL); +- if (!etsects) +- goto no_memory; +- +- err = -ENODEV; +- +- etsects->caps = ptp_gianfar_caps; +- +- if (of_property_read_u32(node, "fsl,cksel", &etsects->cksel)) +- etsects->cksel = DEFAULT_CKSEL; +- +- if (of_property_read_u32(node, +- "fsl,tclk-period", &etsects->tclk_period) || +- of_property_read_u32(node, +- "fsl,tmr-prsc", &etsects->tmr_prsc) || +- of_property_read_u32(node, +- "fsl,tmr-add", &etsects->tmr_add) || +- of_property_read_u32(node, +- "fsl,tmr-fiper1", &etsects->tmr_fiper1) || +- of_property_read_u32(node, +- "fsl,tmr-fiper2", &etsects->tmr_fiper2) || +- of_property_read_u32(node, +- "fsl,max-adj", &etsects->caps.max_adj)) { +- pr_err("device tree node missing required elements\n"); +- goto no_node; +- } +- +- etsects->irq = platform_get_irq(dev, 0); +- +- if (etsects->irq < 0) { +- pr_err("irq not in device tree\n"); +- goto no_node; +- } +- if (request_irq(etsects->irq, isr, 0, DRIVER, etsects)) { +- pr_err("request_irq failed\n"); +- goto no_node; +- } +- +- etsects->rsrc = platform_get_resource(dev, IORESOURCE_MEM, 0); +- if (!etsects->rsrc) { +- pr_err("no resource\n"); +- goto no_resource; +- } +- if (request_resource(&iomem_resource, etsects->rsrc)) { +- pr_err("resource busy\n"); +- goto no_resource; +- } +- +- spin_lock_init(&etsects->lock); +- +- etsects->regs = ioremap(etsects->rsrc->start, +- resource_size(etsects->rsrc)); +- if (!etsects->regs) { +- pr_err("ioremap ptp registers failed\n"); +- goto no_ioremap; +- } +- getnstimeofday64(&now); +- ptp_gianfar_settime(&etsects->caps, &now); +- +- tmr_ctrl = +- (etsects->tclk_period & TCLK_PERIOD_MASK) << TCLK_PERIOD_SHIFT | +- (etsects->cksel & CKSEL_MASK) << CKSEL_SHIFT; +- +- spin_lock_irqsave(&etsects->lock, flags); +- +- gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl); +- gfar_write(&etsects->regs->tmr_add, etsects->tmr_add); +- gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc); +- gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1); +- gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2); +- set_alarm(etsects); +- gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FIPERST|RTPE|TE|FRD); +- +- spin_unlock_irqrestore(&etsects->lock, flags); +- +- etsects->clock = ptp_clock_register(&etsects->caps, &dev->dev); +- if (IS_ERR(etsects->clock)) { +- err = PTR_ERR(etsects->clock); +- goto no_clock; +- } +- gfar_phc_index = ptp_clock_index(etsects->clock); +- +- platform_set_drvdata(dev, etsects); +- +- return 0; +- +-no_clock: +- iounmap(etsects->regs); +-no_ioremap: +- release_resource(etsects->rsrc); +-no_resource: +- free_irq(etsects->irq, etsects); +-no_node: +- kfree(etsects); +-no_memory: +- return err; +-} +- +-static int gianfar_ptp_remove(struct platform_device *dev) +-{ +- struct etsects *etsects = platform_get_drvdata(dev); +- +- gfar_write(&etsects->regs->tmr_temask, 0); +- gfar_write(&etsects->regs->tmr_ctrl, 0); +- +- gfar_phc_index = -1; +- ptp_clock_unregister(etsects->clock); +- iounmap(etsects->regs); +- release_resource(etsects->rsrc); +- free_irq(etsects->irq, etsects); +- kfree(etsects); +- +- return 0; +-} +- +-static const struct of_device_id match_table[] = { +- { .compatible = "fsl,etsec-ptp" }, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, match_table); +- +-static struct platform_driver gianfar_ptp_driver = { +- .driver = { +- .name = "gianfar_ptp", +- .of_match_table = match_table, +- }, +- .probe = gianfar_ptp_probe, +- .remove = gianfar_ptp_remove, +-}; +- +-module_platform_driver(gianfar_ptp_driver); +- +-MODULE_AUTHOR("Richard Cochran "); +-MODULE_DESCRIPTION("PTP clock using the eTSEC"); +-MODULE_LICENSE("GPL"); +--- a/drivers/ptp/Makefile ++++ b/drivers/ptp/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_PTP_1588_CLOCK_DTE) += ptp_ + obj-$(CONFIG_PTP_1588_CLOCK_IXP46X) += ptp_ixp46x.o + obj-$(CONFIG_PTP_1588_CLOCK_PCH) += ptp_pch.o + obj-$(CONFIG_PTP_1588_CLOCK_KVM) += ptp_kvm.o ++obj-$(CONFIG_PTP_1588_CLOCK_QORIQ) += ptp_qoriq.o +--- a/drivers/ptp/ptp_chardev.c ++++ b/drivers/ptp/ptp_chardev.c +@@ -224,7 +224,7 @@ long ptp_ioctl(struct posix_clock *pc, u + } + pct = &sysoff->ts[0]; + for (i = 0; i < sysoff->n_samples; i++) { +- getnstimeofday64(&ts); ++ ktime_get_real_ts64(&ts); + pct->sec = ts.tv_sec; + pct->nsec = ts.tv_nsec; + pct++; +@@ -235,7 +235,7 @@ long ptp_ioctl(struct posix_clock *pc, u + pct->nsec = ts.tv_nsec; + pct++; + } +- getnstimeofday64(&ts); ++ ktime_get_real_ts64(&ts); + pct->sec = ts.tv_sec; + pct->nsec = ts.tv_nsec; + if (copy_to_user((void __user *)arg, sysoff, sizeof(*sysoff))) +--- /dev/null ++++ b/drivers/ptp/ptp_qoriq.c +@@ -0,0 +1,589 @@ ++/* ++ * PTP 1588 clock for Freescale QorIQ 1588 timer ++ * ++ * Copyright (C) 2010 OMICRON electronics GmbH ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* ++ * Register access functions ++ */ ++ ++/* Caller must hold qoriq_ptp->lock. */ ++static u64 tmr_cnt_read(struct qoriq_ptp *qoriq_ptp) ++{ ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ u64 ns; ++ u32 lo, hi; ++ ++ lo = qoriq_read(®s->ctrl_regs->tmr_cnt_l); ++ hi = qoriq_read(®s->ctrl_regs->tmr_cnt_h); ++ ns = ((u64) hi) << 32; ++ ns |= lo; ++ return ns; ++} ++ ++/* Caller must hold qoriq_ptp->lock. */ ++static void tmr_cnt_write(struct qoriq_ptp *qoriq_ptp, u64 ns) ++{ ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ u32 hi = ns >> 32; ++ u32 lo = ns & 0xffffffff; ++ ++ qoriq_write(®s->ctrl_regs->tmr_cnt_l, lo); ++ qoriq_write(®s->ctrl_regs->tmr_cnt_h, hi); ++} ++ ++/* Caller must hold qoriq_ptp->lock. */ ++static void set_alarm(struct qoriq_ptp *qoriq_ptp) ++{ ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ u64 ns; ++ u32 lo, hi; ++ ++ ns = tmr_cnt_read(qoriq_ptp) + 1500000000ULL; ++ ns = div_u64(ns, 1000000000UL) * 1000000000ULL; ++ ns -= qoriq_ptp->tclk_period; ++ hi = ns >> 32; ++ lo = ns & 0xffffffff; ++ qoriq_write(®s->alarm_regs->tmr_alarm1_l, lo); ++ qoriq_write(®s->alarm_regs->tmr_alarm1_h, hi); ++} ++ ++/* Caller must hold qoriq_ptp->lock. */ ++static void set_fipers(struct qoriq_ptp *qoriq_ptp) ++{ ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ ++ set_alarm(qoriq_ptp); ++ qoriq_write(®s->fiper_regs->tmr_fiper1, qoriq_ptp->tmr_fiper1); ++ qoriq_write(®s->fiper_regs->tmr_fiper2, qoriq_ptp->tmr_fiper2); ++} ++ ++/* ++ * Interrupt service routine ++ */ ++ ++static irqreturn_t isr(int irq, void *priv) ++{ ++ struct qoriq_ptp *qoriq_ptp = priv; ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ struct ptp_clock_event event; ++ u64 ns; ++ u32 ack = 0, lo, hi, mask, val; ++ ++ val = qoriq_read(®s->ctrl_regs->tmr_tevent); ++ ++ if (val & ETS1) { ++ ack |= ETS1; ++ hi = qoriq_read(®s->etts_regs->tmr_etts1_h); ++ lo = qoriq_read(®s->etts_regs->tmr_etts1_l); ++ event.type = PTP_CLOCK_EXTTS; ++ event.index = 0; ++ event.timestamp = ((u64) hi) << 32; ++ event.timestamp |= lo; ++ ptp_clock_event(qoriq_ptp->clock, &event); ++ } ++ ++ if (val & ETS2) { ++ ack |= ETS2; ++ hi = qoriq_read(®s->etts_regs->tmr_etts2_h); ++ lo = qoriq_read(®s->etts_regs->tmr_etts2_l); ++ event.type = PTP_CLOCK_EXTTS; ++ event.index = 1; ++ event.timestamp = ((u64) hi) << 32; ++ event.timestamp |= lo; ++ ptp_clock_event(qoriq_ptp->clock, &event); ++ } ++ ++ if (val & ALM2) { ++ ack |= ALM2; ++ if (qoriq_ptp->alarm_value) { ++ event.type = PTP_CLOCK_ALARM; ++ event.index = 0; ++ event.timestamp = qoriq_ptp->alarm_value; ++ ptp_clock_event(qoriq_ptp->clock, &event); ++ } ++ if (qoriq_ptp->alarm_interval) { ++ ns = qoriq_ptp->alarm_value + qoriq_ptp->alarm_interval; ++ hi = ns >> 32; ++ lo = ns & 0xffffffff; ++ spin_lock(&qoriq_ptp->lock); ++ qoriq_write(®s->alarm_regs->tmr_alarm2_l, lo); ++ qoriq_write(®s->alarm_regs->tmr_alarm2_h, hi); ++ spin_unlock(&qoriq_ptp->lock); ++ qoriq_ptp->alarm_value = ns; ++ } else { ++ qoriq_write(®s->ctrl_regs->tmr_tevent, ALM2); ++ spin_lock(&qoriq_ptp->lock); ++ mask = qoriq_read(®s->ctrl_regs->tmr_temask); ++ mask &= ~ALM2EN; ++ qoriq_write(®s->ctrl_regs->tmr_temask, mask); ++ spin_unlock(&qoriq_ptp->lock); ++ qoriq_ptp->alarm_value = 0; ++ qoriq_ptp->alarm_interval = 0; ++ } ++ } ++ ++ if (val & PP1) { ++ ack |= PP1; ++ event.type = PTP_CLOCK_PPS; ++ ptp_clock_event(qoriq_ptp->clock, &event); ++ } ++ ++ if (ack) { ++ qoriq_write(®s->ctrl_regs->tmr_tevent, ack); ++ return IRQ_HANDLED; ++ } else ++ return IRQ_NONE; ++} ++ ++/* ++ * PTP clock operations ++ */ ++ ++static int ptp_qoriq_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) ++{ ++ u64 adj, diff; ++ u32 tmr_add; ++ int neg_adj = 0; ++ struct qoriq_ptp *qoriq_ptp = container_of(ptp, struct qoriq_ptp, caps); ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ ++ if (scaled_ppm < 0) { ++ neg_adj = 1; ++ scaled_ppm = -scaled_ppm; ++ } ++ tmr_add = qoriq_ptp->tmr_add; ++ adj = tmr_add; ++ ++ /* calculate diff as adj*(scaled_ppm/65536)/1000000 ++ * and round() to the nearest integer ++ */ ++ adj *= scaled_ppm; ++ diff = div_u64(adj, 8000000); ++ diff = (diff >> 13) + ((diff >> 12) & 1); ++ ++ tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff; ++ ++ qoriq_write(®s->ctrl_regs->tmr_add, tmr_add); ++ ++ return 0; ++} ++ ++static int ptp_qoriq_adjtime(struct ptp_clock_info *ptp, s64 delta) ++{ ++ s64 now; ++ unsigned long flags; ++ struct qoriq_ptp *qoriq_ptp = container_of(ptp, struct qoriq_ptp, caps); ++ ++ spin_lock_irqsave(&qoriq_ptp->lock, flags); ++ ++ now = tmr_cnt_read(qoriq_ptp); ++ now += delta; ++ tmr_cnt_write(qoriq_ptp, now); ++ set_fipers(qoriq_ptp); ++ ++ spin_unlock_irqrestore(&qoriq_ptp->lock, flags); ++ ++ return 0; ++} ++ ++static int ptp_qoriq_gettime(struct ptp_clock_info *ptp, ++ struct timespec64 *ts) ++{ ++ u64 ns; ++ unsigned long flags; ++ struct qoriq_ptp *qoriq_ptp = container_of(ptp, struct qoriq_ptp, caps); ++ ++ spin_lock_irqsave(&qoriq_ptp->lock, flags); ++ ++ ns = tmr_cnt_read(qoriq_ptp); ++ ++ spin_unlock_irqrestore(&qoriq_ptp->lock, flags); ++ ++ *ts = ns_to_timespec64(ns); ++ ++ return 0; ++} ++ ++static int ptp_qoriq_settime(struct ptp_clock_info *ptp, ++ const struct timespec64 *ts) ++{ ++ u64 ns; ++ unsigned long flags; ++ struct qoriq_ptp *qoriq_ptp = container_of(ptp, struct qoriq_ptp, caps); ++ ++ ns = timespec64_to_ns(ts); ++ ++ spin_lock_irqsave(&qoriq_ptp->lock, flags); ++ ++ tmr_cnt_write(qoriq_ptp, ns); ++ set_fipers(qoriq_ptp); ++ ++ spin_unlock_irqrestore(&qoriq_ptp->lock, flags); ++ ++ return 0; ++} ++ ++static int ptp_qoriq_enable(struct ptp_clock_info *ptp, ++ struct ptp_clock_request *rq, int on) ++{ ++ struct qoriq_ptp *qoriq_ptp = container_of(ptp, struct qoriq_ptp, caps); ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ unsigned long flags; ++ u32 bit, mask; ++ ++ switch (rq->type) { ++ case PTP_CLK_REQ_EXTTS: ++ switch (rq->extts.index) { ++ case 0: ++ bit = ETS1EN; ++ break; ++ case 1: ++ bit = ETS2EN; ++ break; ++ default: ++ return -EINVAL; ++ } ++ spin_lock_irqsave(&qoriq_ptp->lock, flags); ++ mask = qoriq_read(®s->ctrl_regs->tmr_temask); ++ if (on) ++ mask |= bit; ++ else ++ mask &= ~bit; ++ qoriq_write(®s->ctrl_regs->tmr_temask, mask); ++ spin_unlock_irqrestore(&qoriq_ptp->lock, flags); ++ return 0; ++ ++ case PTP_CLK_REQ_PPS: ++ spin_lock_irqsave(&qoriq_ptp->lock, flags); ++ mask = qoriq_read(®s->ctrl_regs->tmr_temask); ++ if (on) ++ mask |= PP1EN; ++ else ++ mask &= ~PP1EN; ++ qoriq_write(®s->ctrl_regs->tmr_temask, mask); ++ spin_unlock_irqrestore(&qoriq_ptp->lock, flags); ++ return 0; ++ ++ default: ++ break; ++ } ++ ++ return -EOPNOTSUPP; ++} ++ ++static const struct ptp_clock_info ptp_qoriq_caps = { ++ .owner = THIS_MODULE, ++ .name = "qoriq ptp clock", ++ .max_adj = 512000, ++ .n_alarm = 0, ++ .n_ext_ts = N_EXT_TS, ++ .n_per_out = 0, ++ .n_pins = 0, ++ .pps = 1, ++ .adjfine = ptp_qoriq_adjfine, ++ .adjtime = ptp_qoriq_adjtime, ++ .gettime64 = ptp_qoriq_gettime, ++ .settime64 = ptp_qoriq_settime, ++ .enable = ptp_qoriq_enable, ++}; ++ ++/** ++ * qoriq_ptp_nominal_freq - calculate nominal frequency according to ++ * reference clock frequency ++ * ++ * @clk_src: reference clock frequency ++ * ++ * The nominal frequency is the desired clock frequency. ++ * It should be less than the reference clock frequency. ++ * It should be a factor of 1000MHz. ++ * ++ * Return the nominal frequency ++ */ ++static u32 qoriq_ptp_nominal_freq(u32 clk_src) ++{ ++ u32 remainder = 0; ++ ++ clk_src /= 1000000; ++ remainder = clk_src % 100; ++ if (remainder) { ++ clk_src -= remainder; ++ clk_src += 100; ++ } ++ ++ do { ++ clk_src -= 100; ++ ++ } while (1000 % clk_src); ++ ++ return clk_src * 1000000; ++} ++ ++/** ++ * qoriq_ptp_auto_config - calculate a set of default configurations ++ * ++ * @qoriq_ptp: pointer to qoriq_ptp ++ * @node: pointer to device_node ++ * ++ * If below dts properties are not provided, this function will be ++ * called to calculate a set of default configurations for them. ++ * "fsl,tclk-period" ++ * "fsl,tmr-prsc" ++ * "fsl,tmr-add" ++ * "fsl,tmr-fiper1" ++ * "fsl,tmr-fiper2" ++ * "fsl,max-adj" ++ * ++ * Return 0 if success ++ */ ++static int qoriq_ptp_auto_config(struct qoriq_ptp *qoriq_ptp, ++ struct device_node *node) ++{ ++ struct clk *clk; ++ u64 freq_comp; ++ u64 max_adj; ++ u32 nominal_freq; ++ u32 remainder = 0; ++ u32 clk_src = 0; ++ ++ qoriq_ptp->cksel = DEFAULT_CKSEL; ++ ++ clk = of_clk_get(node, 0); ++ if (!IS_ERR(clk)) { ++ clk_src = clk_get_rate(clk); ++ clk_put(clk); ++ } ++ ++ if (clk_src <= 100000000UL) { ++ pr_err("error reference clock value, or lower than 100MHz\n"); ++ return -EINVAL; ++ } ++ ++ nominal_freq = qoriq_ptp_nominal_freq(clk_src); ++ if (!nominal_freq) ++ return -EINVAL; ++ ++ qoriq_ptp->tclk_period = 1000000000UL / nominal_freq; ++ qoriq_ptp->tmr_prsc = DEFAULT_TMR_PRSC; ++ ++ /* Calculate initial frequency compensation value for TMR_ADD register. ++ * freq_comp = ceil(2^32 / freq_ratio) ++ * freq_ratio = reference_clock_freq / nominal_freq ++ */ ++ freq_comp = ((u64)1 << 32) * nominal_freq; ++ freq_comp = div_u64_rem(freq_comp, clk_src, &remainder); ++ if (remainder) ++ freq_comp++; ++ ++ qoriq_ptp->tmr_add = freq_comp; ++ qoriq_ptp->tmr_fiper1 = DEFAULT_FIPER1_PERIOD - qoriq_ptp->tclk_period; ++ qoriq_ptp->tmr_fiper2 = DEFAULT_FIPER2_PERIOD - qoriq_ptp->tclk_period; ++ ++ /* max_adj = 1000000000 * (freq_ratio - 1.0) - 1 ++ * freq_ratio = reference_clock_freq / nominal_freq ++ */ ++ max_adj = 1000000000ULL * (clk_src - nominal_freq); ++ max_adj = div_u64(max_adj, nominal_freq) - 1; ++ qoriq_ptp->caps.max_adj = max_adj; ++ ++ return 0; ++} ++ ++static int qoriq_ptp_probe(struct platform_device *dev) ++{ ++ struct device_node *node = dev->dev.of_node; ++ struct qoriq_ptp *qoriq_ptp; ++ struct qoriq_ptp_registers *regs; ++ struct timespec64 now; ++ int err = -ENOMEM; ++ u32 tmr_ctrl; ++ unsigned long flags; ++ void __iomem *base; ++ ++ qoriq_ptp = kzalloc(sizeof(*qoriq_ptp), GFP_KERNEL); ++ if (!qoriq_ptp) ++ goto no_memory; ++ ++ err = -EINVAL; ++ ++ qoriq_ptp->caps = ptp_qoriq_caps; ++ ++ if (of_property_read_u32(node, "fsl,cksel", &qoriq_ptp->cksel)) ++ qoriq_ptp->cksel = DEFAULT_CKSEL; ++ ++ if (of_property_read_u32(node, ++ "fsl,tclk-period", &qoriq_ptp->tclk_period) || ++ of_property_read_u32(node, ++ "fsl,tmr-prsc", &qoriq_ptp->tmr_prsc) || ++ of_property_read_u32(node, ++ "fsl,tmr-add", &qoriq_ptp->tmr_add) || ++ of_property_read_u32(node, ++ "fsl,tmr-fiper1", &qoriq_ptp->tmr_fiper1) || ++ of_property_read_u32(node, ++ "fsl,tmr-fiper2", &qoriq_ptp->tmr_fiper2) || ++ of_property_read_u32(node, ++ "fsl,max-adj", &qoriq_ptp->caps.max_adj)) { ++ pr_warn("device tree node missing required elements, try automatic configuration\n"); ++ ++ if (qoriq_ptp_auto_config(qoriq_ptp, node)) ++ goto no_config; ++ } ++ ++ err = -ENODEV; ++ ++ qoriq_ptp->irq = platform_get_irq(dev, 0); ++ ++ if (qoriq_ptp->irq < 0) { ++ pr_err("irq not in device tree\n"); ++ goto no_node; ++ } ++ if (request_irq(qoriq_ptp->irq, isr, IRQF_SHARED, DRIVER, qoriq_ptp)) { ++ pr_err("request_irq failed\n"); ++ goto no_node; ++ } ++ ++ qoriq_ptp->rsrc = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ if (!qoriq_ptp->rsrc) { ++ pr_err("no resource\n"); ++ goto no_resource; ++ } ++ if (request_resource(&iomem_resource, qoriq_ptp->rsrc)) { ++ pr_err("resource busy\n"); ++ goto no_resource; ++ } ++ ++ spin_lock_init(&qoriq_ptp->lock); ++ ++ base = ioremap(qoriq_ptp->rsrc->start, ++ resource_size(qoriq_ptp->rsrc)); ++ if (!base) { ++ pr_err("ioremap ptp registers failed\n"); ++ goto no_ioremap; ++ } ++ ++ qoriq_ptp->base = base; ++ ++ if (of_device_is_compatible(node, "fsl,fman-ptp-timer")) { ++ qoriq_ptp->regs.ctrl_regs = base + FMAN_CTRL_REGS_OFFSET; ++ qoriq_ptp->regs.alarm_regs = base + FMAN_ALARM_REGS_OFFSET; ++ qoriq_ptp->regs.fiper_regs = base + FMAN_FIPER_REGS_OFFSET; ++ qoriq_ptp->regs.etts_regs = base + FMAN_ETTS_REGS_OFFSET; ++ } else { ++ qoriq_ptp->regs.ctrl_regs = base + CTRL_REGS_OFFSET; ++ qoriq_ptp->regs.alarm_regs = base + ALARM_REGS_OFFSET; ++ qoriq_ptp->regs.fiper_regs = base + FIPER_REGS_OFFSET; ++ qoriq_ptp->regs.etts_regs = base + ETTS_REGS_OFFSET; ++ } ++ ++ ktime_get_real_ts64(&now); ++ ptp_qoriq_settime(&qoriq_ptp->caps, &now); ++ ++ tmr_ctrl = ++ (qoriq_ptp->tclk_period & TCLK_PERIOD_MASK) << TCLK_PERIOD_SHIFT | ++ (qoriq_ptp->cksel & CKSEL_MASK) << CKSEL_SHIFT; ++ ++ spin_lock_irqsave(&qoriq_ptp->lock, flags); ++ ++ regs = &qoriq_ptp->regs; ++ qoriq_write(®s->ctrl_regs->tmr_ctrl, tmr_ctrl); ++ qoriq_write(®s->ctrl_regs->tmr_add, qoriq_ptp->tmr_add); ++ qoriq_write(®s->ctrl_regs->tmr_prsc, qoriq_ptp->tmr_prsc); ++ qoriq_write(®s->fiper_regs->tmr_fiper1, qoriq_ptp->tmr_fiper1); ++ qoriq_write(®s->fiper_regs->tmr_fiper2, qoriq_ptp->tmr_fiper2); ++ set_alarm(qoriq_ptp); ++ qoriq_write(®s->ctrl_regs->tmr_ctrl, tmr_ctrl|FIPERST|RTPE|TE|FRD); ++ ++ spin_unlock_irqrestore(&qoriq_ptp->lock, flags); ++ ++ qoriq_ptp->clock = ptp_clock_register(&qoriq_ptp->caps, &dev->dev); ++ if (IS_ERR(qoriq_ptp->clock)) { ++ err = PTR_ERR(qoriq_ptp->clock); ++ goto no_clock; ++ } ++ qoriq_ptp->phc_index = ptp_clock_index(qoriq_ptp->clock); ++ ++ platform_set_drvdata(dev, qoriq_ptp); ++ ++ return 0; ++ ++no_clock: ++ iounmap(qoriq_ptp->base); ++no_ioremap: ++ release_resource(qoriq_ptp->rsrc); ++no_resource: ++ free_irq(qoriq_ptp->irq, qoriq_ptp); ++no_config: ++no_node: ++ kfree(qoriq_ptp); ++no_memory: ++ return err; ++} ++ ++static int qoriq_ptp_remove(struct platform_device *dev) ++{ ++ struct qoriq_ptp *qoriq_ptp = platform_get_drvdata(dev); ++ struct qoriq_ptp_registers *regs = &qoriq_ptp->regs; ++ ++ qoriq_write(®s->ctrl_regs->tmr_temask, 0); ++ qoriq_write(®s->ctrl_regs->tmr_ctrl, 0); ++ ++ ptp_clock_unregister(qoriq_ptp->clock); ++ iounmap(qoriq_ptp->base); ++ release_resource(qoriq_ptp->rsrc); ++ free_irq(qoriq_ptp->irq, qoriq_ptp); ++ kfree(qoriq_ptp); ++ ++ return 0; ++} ++ ++static const struct of_device_id match_table[] = { ++ { .compatible = "fsl,etsec-ptp" }, ++ { .compatible = "fsl,fman-ptp-timer" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, match_table); ++ ++static struct platform_driver qoriq_ptp_driver = { ++ .driver = { ++ .name = "ptp_qoriq", ++ .of_match_table = match_table, ++ }, ++ .probe = qoriq_ptp_probe, ++ .remove = qoriq_ptp_remove, ++}; ++ ++module_platform_driver(qoriq_ptp_driver); ++ ++MODULE_AUTHOR("Richard Cochran "); ++MODULE_DESCRIPTION("PTP clock for Freescale QorIQ 1588 timer"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/include/linux/fsl/ptp_qoriq.h +@@ -0,0 +1,169 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (C) 2010 OMICRON electronics GmbH ++ * Copyright 2018 NXP ++ */ ++#ifndef __PTP_QORIQ_H__ ++#define __PTP_QORIQ_H__ ++ ++#include ++#include ++ ++/* ++ * qoriq ptp registers ++ */ ++struct ctrl_regs { ++ u32 tmr_ctrl; /* Timer control register */ ++ u32 tmr_tevent; /* Timestamp event register */ ++ u32 tmr_temask; /* Timer event mask register */ ++ u32 tmr_pevent; /* Timestamp event register */ ++ u32 tmr_pemask; /* Timer event mask register */ ++ u32 tmr_stat; /* Timestamp status register */ ++ u32 tmr_cnt_h; /* Timer counter high register */ ++ u32 tmr_cnt_l; /* Timer counter low register */ ++ u32 tmr_add; /* Timer drift compensation addend register */ ++ u32 tmr_acc; /* Timer accumulator register */ ++ u32 tmr_prsc; /* Timer prescale */ ++ u8 res1[4]; ++ u32 tmroff_h; /* Timer offset high */ ++ u32 tmroff_l; /* Timer offset low */ ++}; ++ ++struct alarm_regs { ++ u32 tmr_alarm1_h; /* Timer alarm 1 high register */ ++ u32 tmr_alarm1_l; /* Timer alarm 1 high register */ ++ u32 tmr_alarm2_h; /* Timer alarm 2 high register */ ++ u32 tmr_alarm2_l; /* Timer alarm 2 high register */ ++}; ++ ++struct fiper_regs { ++ u32 tmr_fiper1; /* Timer fixed period interval */ ++ u32 tmr_fiper2; /* Timer fixed period interval */ ++ u32 tmr_fiper3; /* Timer fixed period interval */ ++}; ++ ++struct etts_regs { ++ u32 tmr_etts1_h; /* Timestamp of general purpose external trigger */ ++ u32 tmr_etts1_l; /* Timestamp of general purpose external trigger */ ++ u32 tmr_etts2_h; /* Timestamp of general purpose external trigger */ ++ u32 tmr_etts2_l; /* Timestamp of general purpose external trigger */ ++}; ++ ++struct qoriq_ptp_registers { ++ struct ctrl_regs __iomem *ctrl_regs; ++ struct alarm_regs __iomem *alarm_regs; ++ struct fiper_regs __iomem *fiper_regs; ++ struct etts_regs __iomem *etts_regs; ++}; ++ ++/* Offset definitions for the four register groups */ ++#define CTRL_REGS_OFFSET 0x0 ++#define ALARM_REGS_OFFSET 0x40 ++#define FIPER_REGS_OFFSET 0x80 ++#define ETTS_REGS_OFFSET 0xa0 ++ ++#define FMAN_CTRL_REGS_OFFSET 0x80 ++#define FMAN_ALARM_REGS_OFFSET 0xb8 ++#define FMAN_FIPER_REGS_OFFSET 0xd0 ++#define FMAN_ETTS_REGS_OFFSET 0xe0 ++ ++ ++/* Bit definitions for the TMR_CTRL register */ ++#define ALM1P (1<<31) /* Alarm1 output polarity */ ++#define ALM2P (1<<30) /* Alarm2 output polarity */ ++#define FIPERST (1<<28) /* FIPER start indication */ ++#define PP1L (1<<27) /* Fiper1 pulse loopback mode enabled. */ ++#define PP2L (1<<26) /* Fiper2 pulse loopback mode enabled. */ ++#define TCLK_PERIOD_SHIFT (16) /* 1588 timer reference clock period. */ ++#define TCLK_PERIOD_MASK (0x3ff) ++#define RTPE (1<<15) /* Record Tx Timestamp to PAL Enable. */ ++#define FRD (1<<14) /* FIPER Realignment Disable */ ++#define ESFDP (1<<11) /* External Tx/Rx SFD Polarity. */ ++#define ESFDE (1<<10) /* External Tx/Rx SFD Enable. */ ++#define ETEP2 (1<<9) /* External trigger 2 edge polarity */ ++#define ETEP1 (1<<8) /* External trigger 1 edge polarity */ ++#define COPH (1<<7) /* Generated clock output phase. */ ++#define CIPH (1<<6) /* External oscillator input clock phase */ ++#define TMSR (1<<5) /* Timer soft reset. */ ++#define BYP (1<<3) /* Bypass drift compensated clock */ ++#define TE (1<<2) /* 1588 timer enable. */ ++#define CKSEL_SHIFT (0) /* 1588 Timer reference clock source */ ++#define CKSEL_MASK (0x3) ++ ++/* Bit definitions for the TMR_TEVENT register */ ++#define ETS2 (1<<25) /* External trigger 2 timestamp sampled */ ++#define ETS1 (1<<24) /* External trigger 1 timestamp sampled */ ++#define ALM2 (1<<17) /* Current time = alarm time register 2 */ ++#define ALM1 (1<<16) /* Current time = alarm time register 1 */ ++#define PP1 (1<<7) /* periodic pulse generated on FIPER1 */ ++#define PP2 (1<<6) /* periodic pulse generated on FIPER2 */ ++#define PP3 (1<<5) /* periodic pulse generated on FIPER3 */ ++ ++/* Bit definitions for the TMR_TEMASK register */ ++#define ETS2EN (1<<25) /* External trigger 2 timestamp enable */ ++#define ETS1EN (1<<24) /* External trigger 1 timestamp enable */ ++#define ALM2EN (1<<17) /* Timer ALM2 event enable */ ++#define ALM1EN (1<<16) /* Timer ALM1 event enable */ ++#define PP1EN (1<<7) /* Periodic pulse event 1 enable */ ++#define PP2EN (1<<6) /* Periodic pulse event 2 enable */ ++ ++/* Bit definitions for the TMR_PEVENT register */ ++#define TXP2 (1<<9) /* PTP transmitted timestamp im TXTS2 */ ++#define TXP1 (1<<8) /* PTP transmitted timestamp in TXTS1 */ ++#define RXP (1<<0) /* PTP frame has been received */ ++ ++/* Bit definitions for the TMR_PEMASK register */ ++#define TXP2EN (1<<9) /* Transmit PTP packet event 2 enable */ ++#define TXP1EN (1<<8) /* Transmit PTP packet event 1 enable */ ++#define RXPEN (1<<0) /* Receive PTP packet event enable */ ++ ++/* Bit definitions for the TMR_STAT register */ ++#define STAT_VEC_SHIFT (0) /* Timer general purpose status vector */ ++#define STAT_VEC_MASK (0x3f) ++ ++/* Bit definitions for the TMR_PRSC register */ ++#define PRSC_OCK_SHIFT (0) /* Output clock division/prescale factor. */ ++#define PRSC_OCK_MASK (0xffff) ++ ++ ++#define DRIVER "ptp_qoriq" ++#define N_EXT_TS 2 ++ ++#define DEFAULT_CKSEL 1 ++#define DEFAULT_TMR_PRSC 2 ++#define DEFAULT_FIPER1_PERIOD 1000000000 ++#define DEFAULT_FIPER2_PERIOD 100000 ++ ++struct qoriq_ptp { ++ void __iomem *base; ++ struct qoriq_ptp_registers regs; ++ spinlock_t lock; /* protects regs */ ++ struct ptp_clock *clock; ++ struct ptp_clock_info caps; ++ struct resource *rsrc; ++ int irq; ++ int phc_index; ++ u64 alarm_interval; /* for periodic alarm */ ++ u64 alarm_value; ++ u32 tclk_period; /* nanoseconds */ ++ u32 tmr_prsc; ++ u32 tmr_add; ++ u32 cksel; ++ u32 tmr_fiper1; ++ u32 tmr_fiper2; ++}; ++ ++static inline u32 qoriq_read(unsigned __iomem *addr) ++{ ++ u32 val; ++ ++ val = ioread32be(addr); ++ return val; ++} ++ ++static inline void qoriq_write(unsigned __iomem *addr, u32 val) ++{ ++ iowrite32be(val, addr); ++} ++ ++#endif diff --git a/target/linux/layerscape/patches-4.14/825-tmu-support-layerscape.patch b/target/linux/layerscape/patches-4.14/825-tmu-support-layerscape.patch new file mode 100644 index 0000000000..5312444f10 --- /dev/null +++ b/target/linux/layerscape/patches-4.14/825-tmu-support-layerscape.patch @@ -0,0 +1,188 @@ +From 2ddaec76dbe9b6e911e2a1442248ab103909cce3 Mon Sep 17 00:00:00 2001 +From: Biwen Li +Date: Wed, 17 Apr 2019 18:59:06 +0800 +Subject: [PATCH] tmu: support layerscape + +This is an integrated patch of tmu for layerscape + +Signed-off-by: Biwen Li +Signed-off-by: Eduardo Valentin +Signed-off-by: Fabio Estevam +Signed-off-by: Yuantian Tang +--- + drivers/thermal/qoriq_thermal.c | 102 ++++++++++++++------------------ + 1 file changed, 46 insertions(+), 56 deletions(-) + +--- a/drivers/thermal/qoriq_thermal.c ++++ b/drivers/thermal/qoriq_thermal.c +@@ -69,14 +69,21 @@ struct qoriq_tmu_regs { + u32 ttr3cr; /* Temperature Range 3 Control Register */ + }; + ++struct qoriq_tmu_data; ++ + /* + * Thermal zone data + */ ++struct qoriq_sensor { ++ struct thermal_zone_device *tzd; ++ struct qoriq_tmu_data *qdata; ++ int id; ++}; ++ + struct qoriq_tmu_data { +- struct thermal_zone_device *tz; + struct qoriq_tmu_regs __iomem *regs; +- int sensor_id; + bool little_endian; ++ struct qoriq_sensor *sensor[SITES_MAX]; + }; + + static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr) +@@ -97,48 +104,51 @@ static u32 tmu_read(struct qoriq_tmu_dat + + static int tmu_get_temp(void *p, int *temp) + { ++ struct qoriq_sensor *qsensor = p; ++ struct qoriq_tmu_data *qdata = qsensor->qdata; + u32 val; +- struct qoriq_tmu_data *data = p; + +- val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr); ++ val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr); + *temp = (val & 0xff) * 1000; + + return 0; + } + +-static int qoriq_tmu_get_sensor_id(void) ++static const struct thermal_zone_of_device_ops tmu_tz_ops = { ++ .get_temp = tmu_get_temp, ++}; ++ ++static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev) + { +- int ret, id; +- struct of_phandle_args sensor_specs; +- struct device_node *np, *sensor_np; ++ struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev); ++ int id, sites = 0; + +- np = of_find_node_by_name(NULL, "thermal-zones"); +- if (!np) +- return -ENODEV; ++ for (id = 0; id < SITES_MAX; id++) { ++ qdata->sensor[id] = devm_kzalloc(&pdev->dev, ++ sizeof(struct qoriq_sensor), GFP_KERNEL); ++ if (!qdata->sensor[id]) ++ return -ENOMEM; ++ ++ qdata->sensor[id]->id = id; ++ qdata->sensor[id]->qdata = qdata; ++ ++ qdata->sensor[id]->tzd = devm_thermal_zone_of_sensor_register( ++ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); ++ if (IS_ERR(qdata->sensor[id]->tzd)) { ++ if (PTR_ERR(qdata->sensor[id]->tzd) == -ENODEV) ++ continue; ++ else ++ return PTR_ERR(qdata->sensor[id]->tzd); + +- sensor_np = of_get_next_child(np, NULL); +- ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors", +- "#thermal-sensor-cells", +- 0, &sensor_specs); +- if (ret) { +- of_node_put(np); +- of_node_put(sensor_np); +- return ret; +- } +- +- if (sensor_specs.args_count >= 1) { +- id = sensor_specs.args[0]; +- WARN(sensor_specs.args_count > 1, +- "%s: too many cells in sensor specifier %d\n", +- sensor_specs.np->name, sensor_specs.args_count); +- } else { +- id = 0; +- } ++ } + +- of_node_put(np); +- of_node_put(sensor_np); ++ sites |= 0x1 << (15 - id); ++ } ++ /* Enable monitoring */ ++ if (sites != 0) ++ tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr); + +- return id; ++ return 0; + } + + static int qoriq_tmu_calibration(struct platform_device *pdev) +@@ -188,16 +198,11 @@ static void qoriq_tmu_init_device(struct + tmu_write(data, TMR_DISABLE, &data->regs->tmr); + } + +-static const struct thermal_zone_of_device_ops tmu_tz_ops = { +- .get_temp = tmu_get_temp, +-}; +- + static int qoriq_tmu_probe(struct platform_device *pdev) + { + int ret; + struct qoriq_tmu_data *data; + struct device_node *np = pdev->dev.of_node; +- u32 site = 0; + + if (!np) { + dev_err(&pdev->dev, "Device OF-Node is NULL"); +@@ -213,13 +218,6 @@ static int qoriq_tmu_probe(struct platfo + + data->little_endian = of_property_read_bool(np, "little-endian"); + +- data->sensor_id = qoriq_tmu_get_sensor_id(); +- if (data->sensor_id < 0) { +- dev_err(&pdev->dev, "Failed to get sensor id\n"); +- ret = -ENODEV; +- goto err_iomap; +- } +- + data->regs = of_iomap(np, 0); + if (!data->regs) { + dev_err(&pdev->dev, "Failed to get memory region\n"); +@@ -233,19 +231,13 @@ static int qoriq_tmu_probe(struct platfo + if (ret < 0) + goto err_tmu; + +- data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id, +- data, &tmu_tz_ops); +- if (IS_ERR(data->tz)) { +- ret = PTR_ERR(data->tz); +- dev_err(&pdev->dev, +- "Failed to register thermal zone device %d\n", ret); +- goto err_tmu; ++ ret = qoriq_tmu_register_tmu_zone(pdev); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Failed to register sensors\n"); ++ ret = -ENODEV; ++ goto err_iomap; + } + +- /* Enable monitoring */ +- site |= 0x1 << (15 - data->sensor_id); +- tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr); +- + return 0; + + err_tmu: +@@ -261,8 +253,6 @@ static int qoriq_tmu_remove(struct platf + { + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); + +- thermal_zone_of_sensor_unregister(&pdev->dev, data->tz); +- + /* Disable monitoring */ + tmu_write(data, TMR_DISABLE, &data->regs->tmr); + diff --git a/target/linux/layerscape/patches-4.14/825-vfio-fsl-mc-Improve-send-mc-command-and-read-respons.patch b/target/linux/layerscape/patches-4.14/825-vfio-fsl-mc-Improve-send-mc-command-and-read-respons.patch deleted file mode 100644 index c04fef044c..0000000000 --- a/target/linux/layerscape/patches-4.14/825-vfio-fsl-mc-Improve-send-mc-command-and-read-respons.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 703b2ca94467a029942fa478a38f0a14c8109766 Mon Sep 17 00:00:00 2001 -From: Bharat Bhushan -Date: Fri, 1 Mar 2019 13:33:58 +0800 -Subject: [PATCH] vfio/fsl-mc: Improve send mc-command and read response - -Actually there is no ordering need when reading response -from mc-portal. Similarly when writing the mc-command, -ordering needed before command is submitted. - -This patch removes un-necessary barriers, response is read -relaxed and maintain ordering when submit command. This also -fixes compilation issue with newer kernel. - -Signed-off-by: Bharat Bhushan -Signed-off-by: Yangbo Lu ---- - drivers/vfio/fsl-mc/vfio_fsl_mc.c | 13 +++++++------ - 1 file changed, 7 insertions(+), 6 deletions(-) - ---- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c -+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c -@@ -331,9 +331,7 @@ static int vfio_fsl_mc_dprc_wait_for_res - u64 header; - struct mc_cmd_header *resp_hdr; - -- __iormb(); -- header = readq(ioaddr); -- __iormb(); -+ header = cpu_to_le64(readq_relaxed(ioaddr)); - - resp_hdr = (struct mc_cmd_header *)&header; - status = (enum mc_cmd_status)resp_hdr->status; -@@ -353,9 +351,12 @@ static int vfio_fsl_mc_send_command(void - { - int i; - -- /* Write at command header in the end */ -- for (i = 7; i >= 0; i--) -- writeq(cmd_data[i], ioaddr + i * sizeof(uint64_t)); -+ /* Write at command parameter into portal */ -+ for (i = 7; i >= 1; i--) -+ writeq_relaxed(cmd_data[i], ioaddr + i * sizeof(uint64_t)); -+ -+ /* Write command header in the end */ -+ writeq(cmd_data[0], ioaddr); - - /* Wait for response before returning to user-space - * This can be optimized in future to even prepare response